WS cleanup: remove trailing white space

Signed-off-by: Wolfgang Denk <wd@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

15 files changed, 24 insertions, 24 deletions

diff --git a/drivers/misc/atsha204a-i2c.c b/drivers/misc/atsha204a-i2c.c
index af65c55..52d9ead 100644
--- a/drivers/misc/atsha204a-i2c.c
+++ b/drivers/misc/atsha204a-i2c.c
@@ -339,7 +339,7 @@ int atsha204a_read(struct udevice *dev, enum atsha204a_zone zone, bool read32,
 		retry--;
 		atsha204a_wakeup(dev);
 	} while (retry >= 0);
-	
+
 	if (res) {
 		debug("ATSHA204A read failed\n");
 		return res;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 582129d..d0351b2 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -4,7 +4,7 @@
  * drivers and users.
  *
  * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
- * Copyright © 2006      Red Hat UK Limited 
+ * Copyright © 2006      Red Hat UK Limited
  *
  */
 
@@ -123,7 +123,7 @@ void *idr_get_next(struct idr *idp, int *next)
 	} else {
 		*next = 0;
 	}
-	
+
 	return ret;
 }
 
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index b1fd779..0c26e1d 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -907,7 +907,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 
  	u32 timer = (CONFIG_SYS_HZ * timeo) / 1000;
  	u32 time_start;
- 
+
  	time_start = get_timer(0);
  	while (get_timer(time_start) < timer) {
 		if (chip->dev_ready) {
diff --git a/drivers/mtd/nand/raw/nand_util.c b/drivers/mtd/nand/raw/nand_util.c
index 5cc256b..d03b864 100644
--- a/drivers/mtd/nand/raw/nand_util.c
+++ b/drivers/mtd/nand/raw/nand_util.c
@@ -189,7 +189,7 @@ int nand_erase_opts(struct mtd_info *mtd,
 
 #define NAND_CMD_LOCK_TIGHT     0x2c
 #define NAND_CMD_LOCK_STATUS    0x7a
- 
+
 /******************************************************************************
  * Support for locking / unlocking operations of some NAND devices
  *****************************************************************************/
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 61e38ba..e2bd326 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -115,7 +115,7 @@ static struct ubi_device *ubi_devices[UBI_MAX_DEVICES];
 #else
 struct ubi_device *ubi_devices[UBI_MAX_DEVICES];
 #endif
- 
+
 #ifndef __UBOOT__
 /* Serializes UBI devices creations and removals */
 DEFINE_MUTEX(ubi_devices_mutex);
diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index ffb1a61..753ca72 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -73,7 +73,7 @@ restart_aneg:
 
 		if (!(wol & BIT(12)) ||
 			((exp & EXPANSION_NWAY) && !(lpa & LPA_LPACK))) {
-			
+
 			/* Looks like aneg failed after all */
 			if (!retries) {
 				printf("%s LPA corruption max attempts\n",
diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
index 3e25cc7..47a930e 100644
--- a/drivers/ram/stm32_sdram.c
+++ b/drivers/ram/stm32_sdram.c
@@ -286,7 +286,7 @@ static int stm32_fmc_of_to_plat(struct udevice *dev)
 		} else {
 			dev_dbg(dev, "cannot find st,mem_remap property\n");
 		}
-		
+
 		swp_fmc = dev_read_u32_default(dev, "st,swp_fmc", NOT_FOUND);
 		if (swp_fmc != NOT_FOUND) {
 			/* set fmc swapping selection */
diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index d4e0745..5896bcb 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -70,16 +70,16 @@ struct reset_ops meson_reset_ops = {
 	.rst_deassert = meson_reset_deassert,
 };
 
-static const struct udevice_id meson_reset_ids[] = {                          
-	{ .compatible = "amlogic,meson-gxbb-reset" },                                  
+static const struct udevice_id meson_reset_ids[] = {
+	{ .compatible = "amlogic,meson-gxbb-reset" },
 	{ .compatible = "amlogic,meson-axg-reset" },
-	{ }                                                                     
-};  
+	{ }
+};
 
 static int meson_reset_probe(struct udevice *dev)
 {
 	struct meson_reset_priv *priv = dev_get_priv(dev);
-	
+
 	return regmap_init_mem(dev_ofnode(dev), &priv->regmap);
 }
 
diff --git a/drivers/serial/serial_msm.c b/drivers/serial/serial_msm.c
index ac4d082..a22623c 100644
--- a/drivers/serial/serial_msm.c
+++ b/drivers/serial/serial_msm.c
@@ -233,7 +233,7 @@ static int msm_serial_of_to_plat(struct udevice *dev)
 	if (priv->base == FDT_ADDR_T_NONE)
 		return -EINVAL;
 
-	priv->clk_bit_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), 
+	priv->clk_bit_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
 							"bit-rate", UART_DM_CLK_RX_TX_BIT_RATE);
 
 	return 0;
diff --git a/drivers/usb/dwc3/dwc3-meson-gxl.c b/drivers/usb/dwc3/dwc3-meson-gxl.c
index 08467d6..7c26290 100644
--- a/drivers/usb/dwc3/dwc3-meson-gxl.c
+++ b/drivers/usb/dwc3/dwc3-meson-gxl.c
@@ -170,7 +170,7 @@ static int dwc3_meson_gxl_usb2_init(struct dwc3_meson_gxl *priv)
 static int dwc3_meson_gxl_usb_init(struct dwc3_meson_gxl *priv)
 {
 	int ret;
-	
+
 	ret = dwc3_meson_gxl_usb2_init(priv);
 	if (ret)
 		return ret;
diff --git a/drivers/usb/musb-new/musb_regs.h b/drivers/usb/musb-new/musb_regs.h
index e9362f6..9fd01fa 100644
--- a/drivers/usb/musb-new/musb_regs.h
+++ b/drivers/usb/musb-new/musb_regs.h
@@ -190,7 +190,7 @@
 
 
 /* SUNXI has different reg addresses, but identical r/w functions */
-#ifndef CONFIG_ARCH_SUNXI 
+#ifndef CONFIG_ARCH_SUNXI
 
 /*
  * Common USB registers
diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c
index 8ac2f0a..61ff68d 100644
--- a/drivers/usb/musb-new/musb_uboot.c
+++ b/drivers/usb/musb-new/musb_uboot.c
@@ -159,7 +159,7 @@ static struct int_queue *_musb_create_int_queue(struct musb_host_data *host,
 static int _musb_destroy_int_queue(struct musb_host_data *host,
 	struct usb_device *dev, struct int_queue *queue)
 {
-	int index = usb_pipein(queue->urb.pipe) * 16 + 
+	int index = usb_pipein(queue->urb.pipe) * 16 +
 		    usb_pipeendpoint(queue->urb.pipe);
 
 	if (queue->urb.status == -EINPROGRESS)
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index afbc648..ffed3b8 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -327,7 +327,7 @@ static int ctrlreq_out_data_phase(struct usb_device *dev, u32 len, void *buffer)
 
 		/* Set TXPKTRDY bit */
 		csr = readw(&musbr->txcsr);
-			
+
 		csr |= MUSB_CSR0_TXPKTRDY;
 		csr |= MUSB_CSR0_H_DIS_PING;
 		writew(csr, &musbr->txcsr);
diff --git a/drivers/video/anx9804.c b/drivers/video/anx9804.c
index b050c42..3037ff3 100644
--- a/drivers/video/anx9804.c
+++ b/drivers/video/anx9804.c
@@ -67,11 +67,11 @@ void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
 		printf("Error anx9804 clock is not stable\n");
 
 	i2c_reg_write(0x39, ANX9804_VID_CTRL2_REG, colordepth);
-	
+
 	/* Set a bunch of analog related register values */
-	i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07); 
-	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19); 
-	i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9); 
+	i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07);
+	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19);
+	i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9);
 	i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
 	i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
 	i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG3, 0x99);
@@ -105,7 +105,7 @@ void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
 	i2c_reg_write(0x38, ANX9804_LINK_BW_SET_REG, data_rate);
 	i2c_reg_write(0x38, ANX9804_LANE_COUNT_SET_REG, lanes);
 
-	/* Link training */	
+	/* Link training */
 	i2c_reg_write(0x38, ANX9804_LINK_TRAINING_CTRL_REG,
 		      ANX9804_LINK_TRAINING_CTRL_EN);
 	mdelay(5);
diff --git a/drivers/video/tdo-tl070wsh30.c b/drivers/video/tdo-tl070wsh30.c
index 813b87a..7ad0af7 100644
--- a/drivers/video/tdo-tl070wsh30.c
+++ b/drivers/video/tdo-tl070wsh30.c
@@ -118,7 +118,7 @@ static int tl070wsh30_panel_probe(struct udevice *dev)
 
 	/* reset panel */
 	dm_gpio_set_value(&priv->reset, true);
-	
+
 	mdelay(10);
 
 	dm_gpio_set_value(&priv->reset, false);