diff options
| author | Faiz Abbas <faiz_abbas@ti.com> | 2021-02-04 15:10:54 +0530 |
|---|---|---|
| committer | Lokesh Vutla <lokeshvutla@ti.com> | 2021-02-04 20:37:57 +0530 |
| commit | 27a87c834fde4442088fb55322162df9d96db228 (patch) | |
| tree | 9cc26145f30c7fc6bd6e58cb80bea1f3dceb2e62 /drivers | |
| parent | a759abf569d4f2a238712485379d23f7a5261992 (diff) | |
| download | u-boot-27a87c834fde4442088fb55322162df9d96db228.zip u-boot-27a87c834fde4442088fb55322162df9d96db228.tar.gz u-boot-27a87c834fde4442088fb55322162df9d96db228.tar.bz2 | |
mmc: am654_sdhci: Fix HISPD bit configuration in some lower speed modes
According to the AM654x Data Manual[1], the setup timing in lower speed
modes can only be met if the controller uses a falling edge data launch.
To ensure this, the HIGH_SPEED_ENA (HOST_CONTROL[2]) bit should be
cleared in default speed, SD high speed, MMC high speed, SDR12 and SDR25
speed modes.
Use the sdhci writeb callback to implement this condition.
[1] http://www.ti.com/lit/gpn/am6546 Section 5.10.5.16.1
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mmc/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/mmc/am654_sdhci.c | 25 |
2 files changed, 24 insertions, 2 deletions
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 14d7913..f8ea921 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -526,6 +526,7 @@ config MMC_SDHCI_AM654 depends on MMC_SDHCI depends on DM_MMC && OF_CONTROL && BLK depends on REGMAP + select MMC_SDHCI_IO_ACCESSORS help Support for Secure Digital Host Controller Interface (SDHCI) controllers present on TI's AM654 SOCs. diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c index 9549420..5dea3eb 100644 --- a/drivers/mmc/am654_sdhci.c +++ b/drivers/mmc/am654_sdhci.c @@ -369,6 +369,26 @@ static int am654_sdhci_deferred_probe(struct sdhci_host *host) return sdhci_probe(dev); } +static void am654_sdhci_write_b(struct sdhci_host *host, u8 val, int reg) +{ + if (reg == SDHCI_HOST_CONTROL) { + switch (host->mmc->selected_mode) { + /* + * According to the data manual, HISPD bit + * should not be set in these speed modes. + */ + case SD_HS: + case MMC_HS: + case UHS_SDR12: + case UHS_SDR25: + val &= ~SDHCI_CTRL_HISPD; + default: + break; + } + } + + writeb(val, host->ioaddr + reg); +} #ifdef MMC_SUPPORTS_TUNING #define ITAP_MAX 32 static int am654_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) @@ -414,6 +434,7 @@ const struct sdhci_ops am654_sdhci_ops = { .deferred_probe = am654_sdhci_deferred_probe, .set_ios_post = &am654_sdhci_set_ios_post, .set_control_reg = &am654_sdhci_set_control_reg, + .write_b = am654_sdhci_write_b, }; const struct am654_driver_data am654_drv_data = { @@ -455,6 +476,7 @@ const struct sdhci_ops j721e_4bit_sdhci_ops = { #endif .deferred_probe = am654_sdhci_deferred_probe, .set_ios_post = &j721e_4bit_sdhci_set_ios_post, + .write_b = am654_sdhci_write_b, }; const struct am654_driver_data j721e_4bit_drv_data = { @@ -532,6 +554,7 @@ static int am654_sdhci_probe(struct udevice *dev) host->max_clk = clock; host->mmc = &plat->mmc; host->mmc->dev = dev; + host->ops = drv_data->ops; ret = sdhci_setup_cfg(cfg, host, cfg->f_max, AM654_SDHCI_MIN_FREQ); if (ret) @@ -541,8 +564,6 @@ static int am654_sdhci_probe(struct udevice *dev) if (ret) return ret; - host->ops = drv_data->ops; - /* Update ops based on SoC revision */ soc = soc_device_match(am654_sdhci_soc_attr); if (soc && soc->data) { |