stm32mp1: ram: remove the support of calibration result

The support of a predefined DDR PHY tuning result is removed for
STM32MP1 driver because it is not needed at the supported frequency
when built-in calibration is executed.

The calibration parameters were provided in the device tree by the
optional node "st,phy-cal", activated in ddr helper file by the
compilation flag DDR_PHY_CAL_SKIP and filled with values generated
by the CubeMX DDR utilities.

This patch
- updates the binding file to remove "st,phy-cal" support
- updates the device trees and remove the associated defines
- simplifies the STM32MP1 DDR driver and remove the support of
  the optional parameter "st,phy-cal"

After this patch, the built-in calibration is always executed
and the calibration registers are moved in the phy dynamic part;
that allows manual tests.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

4 files changed, 27 insertions, 92 deletions

diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c
index 1f84225..9d08660 100644
--- a/drivers/ram/stm32mp1/stm32mp1_ddr.c
+++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c
@@ -68,7 +68,6 @@ struct reg_desc {
 
 #define DDRPHY_REG_REG_SIZE	11	/* st,phy-reg */
 #define	DDRPHY_REG_TIMING_SIZE	10	/* st,phy-timing */
-#define	DDRPHY_REG_CAL_SIZE	12	/* st,phy-cal */
 
 #define DDRCTL_REG_REG(x)	DDRCTL_REG(x, stm32mp1_ddrctrl_reg)
 static const struct reg_desc ddr_reg[DDRCTL_REG_REG_SIZE] = {
@@ -178,22 +177,6 @@ static const struct reg_desc ddrphy_timing[DDRPHY_REG_TIMING_SIZE] = {
 	DDRPHY_REG_TIMING(mr3),
 };
 
-#define DDRPHY_REG_CAL(x)	DDRPHY_REG(x, stm32mp1_ddrphy_cal)
-static const struct reg_desc ddrphy_cal[DDRPHY_REG_CAL_SIZE] = {
-	DDRPHY_REG_CAL(dx0dllcr),
-	DDRPHY_REG_CAL(dx0dqtr),
-	DDRPHY_REG_CAL(dx0dqstr),
-	DDRPHY_REG_CAL(dx1dllcr),
-	DDRPHY_REG_CAL(dx1dqtr),
-	DDRPHY_REG_CAL(dx1dqstr),
-	DDRPHY_REG_CAL(dx2dllcr),
-	DDRPHY_REG_CAL(dx2dqtr),
-	DDRPHY_REG_CAL(dx2dqstr),
-	DDRPHY_REG_CAL(dx3dllcr),
-	DDRPHY_REG_CAL(dx3dqtr),
-	DDRPHY_REG_CAL(dx3dqstr),
-};
-
 /**************************************************************
  * DYNAMIC REGISTERS: only used for debug purpose (read/modify)
  **************************************************************/
@@ -218,12 +201,24 @@ static const struct reg_desc ddrphy_dyn[] = {
 	DDRPHY_REG_DYN(zq0sr1),
 	DDRPHY_REG_DYN(dx0gsr0),
 	DDRPHY_REG_DYN(dx0gsr1),
+	DDRPHY_REG_DYN(dx0dllcr),
+	DDRPHY_REG_DYN(dx0dqtr),
+	DDRPHY_REG_DYN(dx0dqstr),
 	DDRPHY_REG_DYN(dx1gsr0),
 	DDRPHY_REG_DYN(dx1gsr1),
+	DDRPHY_REG_DYN(dx1dllcr),
+	DDRPHY_REG_DYN(dx1dqtr),
+	DDRPHY_REG_DYN(dx1dqstr),
 	DDRPHY_REG_DYN(dx2gsr0),
 	DDRPHY_REG_DYN(dx2gsr1),
+	DDRPHY_REG_DYN(dx2dllcr),
+	DDRPHY_REG_DYN(dx2dqtr),
+	DDRPHY_REG_DYN(dx2dqstr),
 	DDRPHY_REG_DYN(dx3gsr0),
 	DDRPHY_REG_DYN(dx3gsr1),
+	DDRPHY_REG_DYN(dx3dllcr),
+	DDRPHY_REG_DYN(dx3dqtr),
+	DDRPHY_REG_DYN(dx3dqstr),
 };
 
 #define DDRPHY_REG_DYN_SIZE	ARRAY_SIZE(ddrphy_dyn)
@@ -240,7 +235,6 @@ enum reg_type {
 	REG_MAP,
 	REGPHY_REG,
 	REGPHY_TIMING,
-	REGPHY_CAL,
 #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
 /* dynamic registers => managed in driver or not changed,
  * can be dumped in interactive mode
@@ -264,8 +258,6 @@ struct ddr_reg_info {
 	enum base_type base;
 };
 
-#define DDRPHY_REG_CAL(x)	DDRPHY_REG(x, stm32mp1_ddrphy_cal)
-
 const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = {
 [REG_REG] = {
 	"static", ddr_reg, DDRCTL_REG_REG_SIZE, DDR_BASE},
@@ -279,8 +271,6 @@ const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = {
 	"static", ddrphy_reg, DDRPHY_REG_REG_SIZE, DDRPHY_BASE},
 [REGPHY_TIMING] = {
 	"timing", ddrphy_timing, DDRPHY_REG_TIMING_SIZE, DDRPHY_BASE},
-[REGPHY_CAL] = {
-	"cal", ddrphy_cal, DDRPHY_REG_CAL_SIZE, DDRPHY_BASE},
 #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
 [REG_DYN] = {
 	"dyn", ddr_dyn, DDR_REG_DYN_SIZE, DDR_BASE},
@@ -456,9 +446,6 @@ static u32 get_par_addr(const struct stm32mp1_ddr_config *config,
 	case REGPHY_TIMING:
 		par_addr = (u32)&config->p_timing;
 		break;
-	case REGPHY_CAL:
-		par_addr = (u32)&config->p_cal;
-		break;
 	case REG_DYN:
 	case REGPHY_DYN:
 	case REG_TYPE_NB:
@@ -774,8 +761,6 @@ start:
  */
 	set_reg(priv, REGPHY_REG, &config->p_reg);
 	set_reg(priv, REGPHY_TIMING, &config->p_timing);
-	if (config->p_cal_present)
-		set_reg(priv, REGPHY_CAL, &config->p_cal);
 
 	if (INTERACTIVE(STEP_PHY_INIT))
 		goto start;
@@ -810,36 +795,32 @@ start:
 
 	wait_operating_mode(priv, DDRCTRL_STAT_OPERATING_MODE_NORMAL);
 
-	if (config->p_cal_present) {
-		log_debug("DDR DQS training skipped.\n");
-	} else {
-		log_debug("DDR DQS training : ");
+	log_debug("DDR DQS training : ");
 /*  8. Disable Auto refresh and power down by setting
  *    - RFSHCTL3.dis_au_refresh = 1
  *    - PWRCTL.powerdown_en = 0
  *    - DFIMISC.dfiinit_complete_en = 0
  */
-		stm32mp1_refresh_disable(priv->ctl);
+	stm32mp1_refresh_disable(priv->ctl);
 
 /*  9. Program PUBL PGCR to enable refresh during training and rank to train
  *     not done => keep the programed value in PGCR
  */
 
 /* 10. configure PUBL PIR register to specify which training step to run */
-		/* RVTRN is excuted only on LPDDR2/LPDDR3 */
-		if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3)
-			pir = DDRPHYC_PIR_QSTRN;
-		else
-			pir = DDRPHYC_PIR_QSTRN | DDRPHYC_PIR_RVTRN;
-		stm32mp1_ddrphy_init(priv->phy, pir);
+	/* RVTRN is excuted only on LPDDR2/LPDDR3 */
+	if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3)
+		pir = DDRPHYC_PIR_QSTRN;
+	else
+		pir = DDRPHYC_PIR_QSTRN | DDRPHYC_PIR_RVTRN;
+	stm32mp1_ddrphy_init(priv->phy, pir);
 
 /* 11. monitor PUB PGSR.IDONE to poll cpmpletion of training sequence */
-		ddrphy_idone_wait(priv->phy);
+	ddrphy_idone_wait(priv->phy);
 
 /* 12. set back registers in step 8 to the orginal values if desidered */
-		stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3,
-					 config->c_reg.pwrctl);
-	} /* if (config->p_cal_present) */
+	stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3,
+				 config->c_reg.pwrctl);
 
 	/* enable uMCTL2 AXI port 0 and 1 */
 	setbits_le32(&priv->ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN);
diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.h b/drivers/ram/stm32mp1/stm32mp1_ddr.h
index 4998f04..3bfcb85 100644
--- a/drivers/ram/stm32mp1/stm32mp1_ddr.h
+++ b/drivers/ram/stm32mp1/stm32mp1_ddr.h
@@ -140,21 +140,6 @@ struct stm32mp1_ddrphy_timing {
 	u32 mr3;
 };
 
-struct stm32mp1_ddrphy_cal {
-	u32 dx0dllcr;
-	u32 dx0dqtr;
-	u32 dx0dqstr;
-	u32 dx1dllcr;
-	u32 dx1dqtr;
-	u32 dx1dqstr;
-	u32 dx2dllcr;
-	u32 dx2dqtr;
-	u32 dx2dqstr;
-	u32 dx3dllcr;
-	u32 dx3dqtr;
-	u32 dx3dqstr;
-};
-
 struct stm32mp1_ddr_info {
 	const char *name;
 	u32 speed; /* in kHZ */
@@ -169,8 +154,6 @@ struct stm32mp1_ddr_config {
 	struct stm32mp1_ddrctrl_perf c_perf;
 	struct stm32mp1_ddrphy_reg p_reg;
 	struct stm32mp1_ddrphy_timing p_timing;
-	struct stm32mp1_ddrphy_cal p_cal;
-	bool p_cal_present;
 };
 
 int stm32mp1_ddr_clk_enable(struct ddr_info *priv, u32 mem_speed);
diff --git a/drivers/ram/stm32mp1/stm32mp1_interactive.c b/drivers/ram/stm32mp1/stm32mp1_interactive.c
index 8c2310a..a667d49 100644
--- a/drivers/ram/stm32mp1/stm32mp1_interactive.c
+++ b/drivers/ram/stm32mp1/stm32mp1_interactive.c
@@ -111,7 +111,7 @@ static void stm32mp1_do_usage(void)
 		"help                       displays help\n"
 		"info                       displays DDR information\n"
 		"info  <param> <val>        changes DDR information\n"
-		"      with <param> = step, name, size, speed or cal\n"
+		"      with <param> = step, name, size or speed\n"
 		"freq                       displays the DDR PHY frequency in kHz\n"
 		"freq  <freq>               changes the DDR PHY frequency\n"
 		"param [type|reg]           prints input parameters\n"
@@ -132,7 +132,7 @@ static void stm32mp1_do_usage(void)
 		"\nwith for [type|reg]:\n"
 		"  all registers if absent\n"
 		"  <type> = ctl, phy\n"
-		"           or one category (static, timing, map, perf, cal, dyn)\n"
+		"           or one category (static, timing, map, perf, dyn)\n"
 		"  <reg> = name of the register\n"
 	};
 
@@ -165,7 +165,6 @@ static void stm32mp1_do_info(struct ddr_info *priv,
 		printf("name = %s\n", config->info.name);
 		printf("size = 0x%x\n", config->info.size);
 		printf("speed = %d kHz\n", config->info.speed);
-		printf("cal = %d\n", config->p_cal_present);
 		return;
 	}
 
@@ -214,16 +213,6 @@ static void stm32mp1_do_info(struct ddr_info *priv,
 		}
 		return;
 	}
-	if (!strcmp(argv[1], "cal")) {
-		if (strict_strtoul(argv[2], 10, &value) < 0 ||
-		    (value != 0 && value != 1)) {
-			printf("invalid value %s\n", argv[2]);
-		} else {
-			config->p_cal_present = value;
-			printf("cal = %d\n", config->p_cal_present);
-		}
-		return;
-	}
 	printf("argument %s invalid\n", argv[1]);
 }
 
diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c
index 98fa1f4..3b65269 100644
--- a/drivers/ram/stm32mp1/stm32mp1_ram.c
+++ b/drivers/ram/stm32mp1/stm32mp1_ram.c
@@ -95,26 +95,22 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)
 	{	.name = x,						\
 		.offset = offsetof(struct stm32mp1_ddr_config, y),	\
 		.size = sizeof(config.y) / sizeof(u32),			\
-		.present = z,						\
 	}
 
 #define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x, NULL)
 #define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x, NULL)
-#define PHY_PARAM_OPT(x) PARAM("st,phy-"#x, p_##x, &config.p_##x##_present)
 
 	const struct {
 		const char *name; /* name in DT */
 		const u32 offset; /* offset in config struct */
 		const u32 size;   /* size of parameters */
-		bool * const present;  /* presence indication for opt */
 	} param[] = {
 		CTL_PARAM(reg),
 		CTL_PARAM(timing),
 		CTL_PARAM(map),
 		CTL_PARAM(perf),
 		PHY_PARAM(reg),
-		PHY_PARAM(timing),
-		PHY_PARAM_OPT(cal)
+		PHY_PARAM(timing)
 	};
 
 	config.info.speed = ofnode_read_u32_default(node, "st,mem-speed", 0);
@@ -133,25 +129,11 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)
 					 param[idx].size);
 		dev_dbg(dev, "%s: %s[0x%x] = %d\n", __func__,
 			param[idx].name, param[idx].size, ret);
-		if (ret &&
-		    (ret != -FDT_ERR_NOTFOUND || !param[idx].present)) {
+		if (ret) {
 			dev_err(dev, "Cannot read %s, error=%d\n",
 				param[idx].name, ret);
 			return -EINVAL;
 		}
-		if (param[idx].present) {
-			/* save presence of optional parameters */
-			*param[idx].present = true;
-			if (ret == -FDT_ERR_NOTFOUND) {
-				*param[idx].present = false;
-#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
-				/* reset values if used later */
-				memset((void *)((u32)&config +
-						param[idx].offset),
-					0, param[idx].size * sizeof(u32));
-#endif
-			}
-		}
 	}
 
 	ret = clk_get_by_name(dev, "axidcg", &axidcg);