i2c: nuvoton: Add NPCM7xx i2c driver

Add Nuvoton BMC NPCM750 i2c driver

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

3 files changed, 636 insertions, 0 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 72d06e4..be4724b 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -447,6 +447,11 @@ config SYS_I2C_NEXELL
 	  have several I2C ports and all are provided, controlled by the
 	  device tree.
 
+config SYS_I2C_NPCM
+	bool "Nuvoton NPCM I2C driver"
+	help
+	  Support for Nuvoton I2C controller driver.
+
 config SYS_I2C_OCORES
 	bool "ocores I2C driver"
 	depends on DM_I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 9d41f37..7e046f8 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_SYS_I2C_MV) += mv_i2c.o
 obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
 obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
 obj-$(CONFIG_SYS_I2C_NEXELL) += nx_i2c.o
+obj-$(CONFIG_SYS_I2C_NPCM) += npcm_i2c.o
 obj-$(CONFIG_SYS_I2C_OCORES) += ocores_i2c.o
 obj-$(CONFIG_SYS_I2C_OCTEON) += octeon_i2c.o
 obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
diff --git a/drivers/i2c/npcm-i2c.c b/drivers/i2c/npcm-i2c.c
new file mode 100644
index 0000000..ea4ef53
--- /dev/null
+++ b/drivers/i2c/npcm-i2c.c
@@ -0,0 +1,630 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Nuvoton Technology Corp.
+ */
+
+#include <clk.h>
+#include <dm.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <linux/iopoll.h>
+#include <asm/arch/gcr.h>
+
+#define I2C_FREQ_100K			100000
+#define NPCM_I2C_TIMEOUT_MS		10
+#define NPCM7XX_I2CSEGCTL_INIT_VAL	0x0333F000
+#define NPCM8XX_I2CSEGCTL_INIT_VAL	0x9333F000
+
+/* SCLFRQ min/max field values  */
+#define SCLFRQ_MIN		10
+#define SCLFRQ_MAX		511
+
+/* SMBCTL1 */
+#define SMBCTL1_START		BIT(0)
+#define SMBCTL1_STOP		BIT(1)
+#define SMBCTL1_INTEN		BIT(2)
+#define SMBCTL1_ACK		BIT(4)
+#define SMBCTL1_STASTRE		BIT(7)
+
+/* SMBCTL2 */
+#define SMBCTL2_ENABLE		BIT(0)
+
+/* SMBCTL3 */
+#define SMBCTL3_SCL_LVL		BIT(7)
+#define SMBCTL3_SDA_LVL		BIT(6)
+
+/* SMBCST */
+#define SMBCST_BB		BIT(1)
+#define SMBCST_TGSCL		BIT(5)
+
+/* SMBST */
+#define SMBST_XMIT		BIT(0)
+#define SMBST_MASTER		BIT(1)
+#define SMBST_STASTR		BIT(3)
+#define SMBST_NEGACK		BIT(4)
+#define SMBST_BER		BIT(5)
+#define SMBST_SDAST		BIT(6)
+
+/* SMBCST3 in bank0 */
+#define SMBCST3_EO_BUSY		BIT(7)
+
+/* SMBFIF_CTS in bank1 */
+#define SMBFIF_CTS_CLR_FIFO	BIT(6)
+
+#define SMBFIF_CTL_FIFO_EN	BIT(4)
+#define SMBCTL3_BNK_SEL		BIT(5)
+
+enum {
+	I2C_ERR_NACK = 1,
+	I2C_ERR_BER,
+	I2C_ERR_TIMEOUT,
+};
+
+struct smb_bank0_regs {
+	u8 addr3;
+	u8 addr7;
+	u8 addr4;
+	u8 addr8;
+	u16 addr5;
+	u16 addr6;
+	u8 cst2;
+	u8 cst3;
+	u8 ctl4;
+	u8 ctl5;
+	u8 scllt;
+	u8 fif_ctl;
+	u8 sclht;
+};
+
+struct smb_bank1_regs {
+	u8 fif_cts;
+	u8 fair_per;
+	u16 txf_ctl;
+	u32 t_out;
+	u8 cst2;
+	u8 cst3;
+	u16 txf_sts;
+	u16 rxf_sts;
+	u8 rxf_ctl;
+};
+
+struct npcm_i2c_regs {
+	u16 sda;
+	u16 st;
+	u16 cst;
+	u16 ctl1;
+	u16 addr;
+	u16 ctl2;
+	u16 addr2;
+	u16 ctl3;
+	union {
+		struct smb_bank0_regs bank0;
+		struct smb_bank1_regs bank1;
+	};
+
+};
+
+struct npcm_i2c_bus {
+	struct npcm_i2c_regs *reg;
+	int num;
+	u32 apb_clk;
+	u32 freq;
+	bool started;
+};
+
+static void npcm_dump_regs(struct npcm_i2c_bus *bus)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+
+	printf("\n");
+	printf("SMBST=0x%x\n", readb(&reg->st));
+	printf("SMBCST=0x%x\n", readb(&reg->cst));
+	printf("SMBCTL1=0x%x\n", readb(&reg->ctl1));
+	printf("\n");
+}
+
+static int npcm_i2c_check_sda(struct npcm_i2c_bus *bus)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+	ulong start_time;
+	int err = I2C_ERR_TIMEOUT;
+	u8 val;
+
+	start_time = get_timer(0);
+	/* wait SDAST to be 1 */
+	while (get_timer(start_time) < NPCM_I2C_TIMEOUT_MS) {
+		val = readb(&reg->st);
+		if (val & SMBST_NEGACK) {
+			err = I2C_ERR_NACK;
+			break;
+		}
+		if (val & SMBST_BER) {
+			err = I2C_ERR_BER;
+			break;
+		}
+		if (val & SMBST_SDAST) {
+			err = 0;
+			break;
+		}
+	}
+
+	if (err)
+		printf("%s: err %d\n", __func__, err);
+
+	return err;
+}
+
+static int npcm_i2c_send_start(struct npcm_i2c_bus *bus)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+	ulong start_time;
+	int err = I2C_ERR_TIMEOUT;
+
+	/* Generate START condition */
+	setbits_8(&reg->ctl1, SMBCTL1_START);
+
+	start_time = get_timer(0);
+	while (get_timer(start_time) < NPCM_I2C_TIMEOUT_MS) {
+		if (readb(&reg->st) & SMBST_BER)
+			return I2C_ERR_BER;
+		if (readb(&reg->st) & SMBST_MASTER) {
+			err = 0;
+			break;
+		}
+	}
+	bus->started = true;
+
+	return err;
+}
+
+static int npcm_i2c_send_stop(struct npcm_i2c_bus *bus, bool wait)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+	ulong start_time;
+	int err = I2C_ERR_TIMEOUT;
+
+	setbits_8(&reg->ctl1, SMBCTL1_STOP);
+
+	/* Clear NEGACK, STASTR and BER bits  */
+	writeb(SMBST_STASTR | SMBST_NEGACK | SMBST_BER, &reg->st);
+
+	bus->started = false;
+
+	if (!wait)
+		return 0;
+
+	start_time = get_timer(0);
+	while (get_timer(start_time) < NPCM_I2C_TIMEOUT_MS) {
+		if ((readb(&reg->ctl1) & SMBCTL1_STOP) == 0) {
+			err = 0;
+			break;
+		}
+	}
+	if (err) {
+		printf("%s: err %d\n", __func__, err);
+		npcm_dump_regs(bus);
+	}
+
+	return err;
+}
+
+static void npcm_i2c_reset(struct npcm_i2c_bus *bus)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+
+	debug("%s: module %d\n", __func__, bus->num);
+	/* disable & enable SMB moudle */
+	clrbits_8(&reg->ctl2, SMBCTL2_ENABLE);
+	setbits_8(&reg->ctl2, SMBCTL2_ENABLE);
+
+	/* clear BB and status */
+	writeb(SMBCST_BB, &reg->cst);
+	writeb(0xff, &reg->st);
+
+	/* select bank 1 */
+	setbits_8(&reg->ctl3, SMBCTL3_BNK_SEL);
+	/* Clear all fifo bits */
+	writeb(SMBFIF_CTS_CLR_FIFO, &reg->bank1.fif_cts);
+
+	/* select bank 0 */
+	clrbits_8(&reg->ctl3, SMBCTL3_BNK_SEL);
+	/* clear EOB bit */
+	writeb(SMBCST3_EO_BUSY, &reg->bank0.cst3);
+	/* single byte mode */
+	clrbits_8(&reg->bank0.fif_ctl, SMBFIF_CTL_FIFO_EN);
+
+	/* set POLL mode */
+	writeb(0, &reg->ctl1);
+}
+
+static void npcm_i2c_recovery(struct npcm_i2c_bus *bus, u32 addr)
+{
+	u8 val;
+	int iter = 27;
+	struct npcm_i2c_regs *reg = bus->reg;
+	int err;
+
+	val = readb(&reg->ctl3);
+	/* Skip recovery, bus not stucked */
+	if ((val & SMBCTL3_SCL_LVL) && (val & SMBCTL3_SDA_LVL))
+		return;
+
+	printf("Performing I2C bus %d recovery...\n", bus->num);
+	/* SCL/SDA are not releaed, perform recovery */
+	while (1) {
+		/* toggle SCL line */
+		writeb(SMBCST_TGSCL, &reg->cst);
+
+		udelay(20);
+		val = readb(&reg->ctl3);
+		if (val & SMBCTL3_SDA_LVL)
+			break;
+		if (iter-- == 0)
+			break;
+	}
+
+	if (val & SMBCTL3_SDA_LVL) {
+		writeb((u8)((addr << 1) & 0xff), &reg->sda);
+		err = npcm_i2c_send_start(bus);
+		if (!err) {
+			udelay(20);
+			npcm_i2c_send_stop(bus, false);
+			udelay(200);
+			printf("I2C bus %d recovery completed\n",
+			       bus->num);
+		} else {
+			printf("%s: send START err %d\n", __func__, err);
+		}
+	} else {
+		printf("Fail to recover I2C bus %d\n", bus->num);
+	}
+	npcm_i2c_reset(bus);
+}
+
+static int npcm_i2c_send_address(struct npcm_i2c_bus *bus, u8 addr,
+				 bool stall)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+	ulong start_time;
+	u8 val;
+
+	/* Stall After Start Enable */
+	if (stall)
+		setbits_8(&reg->ctl1, SMBCTL1_STASTRE);
+
+	writeb(addr, &reg->sda);
+	if (stall) {
+		start_time = get_timer(0);
+		while (get_timer(start_time) < NPCM_I2C_TIMEOUT_MS) {
+			if (readb(&reg->st) & SMBST_STASTR)
+				break;
+
+			if (readb(&reg->st) & SMBST_BER) {
+				clrbits_8(&reg->ctl1, SMBCTL1_STASTRE);
+				return I2C_ERR_BER;
+			}
+		}
+	}
+
+	/* check ACK */
+	val = readb(&reg->st);
+	if (val & SMBST_NEGACK) {
+		debug("NACK on addr 0x%x\n", addr >> 1);
+		/* After a Stop condition, writing 1 to NEGACK clears it */
+		return I2C_ERR_NACK;
+	}
+	if (val & SMBST_BER)
+		return I2C_ERR_BER;
+
+	return 0;
+}
+
+static int npcm_i2c_read_bytes(struct npcm_i2c_bus *bus, u8 *data, int len)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+	u8 val;
+	int i;
+	int err = 0;
+
+	if (len == 1) {
+		/* bus should be stalled before receiving last byte */
+		setbits_8(&reg->ctl1, SMBCTL1_ACK);
+
+		/* clear STASTRE if it is set */
+		if (readb(&reg->ctl1) & SMBCTL1_STASTRE) {
+			writeb(SMBST_STASTR, &reg->st);
+			clrbits_8(&reg->ctl1, SMBCTL1_STASTRE);
+		}
+		npcm_i2c_check_sda(bus);
+		npcm_i2c_send_stop(bus, false);
+		*data = readb(&reg->sda);
+		/* this must be done to generate STOP condition */
+		writeb(SMBST_NEGACK, &reg->st);
+	} else {
+		for (i = 0; i < len; i++) {
+			/*
+			 * When NEGACK bit is set to 1 after the transmission of a byte,
+			 * SDAST is not set to 1.
+			 */
+			if (i != (len - 1)) {
+				err = npcm_i2c_check_sda(bus);
+			} else {
+				err = readb_poll_timeout(&reg->ctl1, val,
+							 !(val & SMBCTL1_ACK), 100000);
+				if (err) {
+					printf("wait nack timeout\n");
+					err = I2C_ERR_TIMEOUT;
+					npcm_dump_regs(bus);
+				}
+			}
+			if (err && err != I2C_ERR_TIMEOUT)
+				break;
+			if (i == (len - 2)) {
+				/* set NACK before last byte */
+				setbits_8(&reg->ctl1, SMBCTL1_ACK);
+			}
+			if (i == (len - 1)) {
+				/* last byte, send STOP condition */
+				npcm_i2c_send_stop(bus, false);
+				*data = readb(&reg->sda);
+				writeb(SMBST_NEGACK, &reg->st);
+				break;
+			}
+			*data = readb(&reg->sda);
+			data++;
+		}
+	}
+
+	return err;
+}
+
+static int npcm_i2c_send_bytes(struct npcm_i2c_bus *bus, u8 *data, int len)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+	u8 val;
+	int i;
+	int err = 0;
+
+	val = readb(&reg->st);
+	if (val & SMBST_NEGACK)
+		return I2C_ERR_NACK;
+	else if (val & SMBST_BER)
+		return I2C_ERR_BER;
+
+	/* clear STASTRE if it is set */
+	if (readb(&reg->ctl1) & SMBCTL1_STASTRE)
+		clrbits_8(&reg->ctl1, SMBCTL1_STASTRE);
+
+	for (i = 0; i < len; i++) {
+		err = npcm_i2c_check_sda(bus);
+		if (err)
+			break;
+		writeb(*data, &reg->sda);
+		data++;
+	}
+	npcm_i2c_check_sda(bus);
+
+	return err;
+}
+
+static int npcm_i2c_read(struct npcm_i2c_bus *bus, u32 addr, u8 *data,
+			 u32 len)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+	int err;
+	bool stall;
+
+	if (len <= 0)
+		return -EINVAL;
+
+	/* send START condition */
+	err = npcm_i2c_send_start(bus);
+	if (err) {
+		debug("%s: send START err %d\n", __func__, err);
+		return err;
+	}
+
+	stall = (len == 1) ? true : false;
+	/* send address byte */
+	err = npcm_i2c_send_address(bus, (u8)(addr << 1) | 0x1, stall);
+
+	if (!err && len)
+		npcm_i2c_read_bytes(bus, data, len);
+
+	if (err == I2C_ERR_NACK) {
+		/* clear NACK */
+		writeb(SMBST_NEGACK, &reg->st);
+	}
+
+	if (err)
+		debug("%s: err %d\n", __func__, err);
+
+	return err;
+}
+
+static int npcm_i2c_write(struct npcm_i2c_bus *bus, u32 addr, u8 *data,
+			  u32 len)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+	int err;
+	bool stall;
+
+	/* send START condition */
+	err = npcm_i2c_send_start(bus);
+	if (err) {
+		debug("%s: send START err %d\n", __func__, err);
+		return err;
+	}
+
+	stall = (len == 0) ? true : false;
+	/* send address byte */
+	err = npcm_i2c_send_address(bus, (u8)(addr << 1), stall);
+
+	if (!err && len)
+		err = npcm_i2c_send_bytes(bus, data, len);
+
+	/* clear STASTRE if it is set */
+	if (stall)
+		clrbits_8(&reg->ctl1, SMBCTL1_STASTRE);
+
+	if (err)
+		debug("%s: err %d\n", __func__, err);
+
+	return err;
+}
+
+static int npcm_i2c_xfer(struct udevice *dev,
+			 struct i2c_msg *msg, int nmsgs)
+{
+	struct npcm_i2c_bus *bus = dev_get_priv(dev);
+	struct npcm_i2c_regs *reg = bus->reg;
+	int ret = 0, err = 0;
+
+	if (nmsgs < 1 || nmsgs > 2) {
+		printf("%s: commands not support\n", __func__);
+		return -EREMOTEIO;
+	}
+	/* clear ST register */
+	writeb(0xFF, &reg->st);
+
+	for ( ; nmsgs > 0; nmsgs--, msg++) {
+		if (msg->flags & I2C_M_RD)
+			err = npcm_i2c_read(bus, msg->addr, msg->buf,
+					    msg->len);
+		else
+			err = npcm_i2c_write(bus, msg->addr, msg->buf,
+					     msg->len);
+		if (err) {
+			debug("i2c_xfer: error %d\n", err);
+			ret = -EREMOTEIO;
+			break;
+		}
+	}
+
+	if (bus->started)
+		npcm_i2c_send_stop(bus, true);
+
+	if (err)
+		npcm_i2c_recovery(bus, msg->addr);
+
+	return ret;
+}
+
+static int npcm_i2c_init_clk(struct npcm_i2c_bus *bus, u32 bus_freq)
+{
+	struct npcm_i2c_regs *reg = bus->reg;
+	u32 freq = bus->apb_clk;
+	u32 sclfrq;
+	u8 hldt, val;
+
+	if (bus_freq > I2C_FREQ_100K) {
+		printf("Support standard mode only\n");
+		return -EINVAL;
+	}
+
+	/* SCLFRQ = T(SCL)/4/T(CLK) = FREQ(CLK)/4/FREQ(SCL) */
+	sclfrq = freq / (bus_freq * 4);
+	if (sclfrq < SCLFRQ_MIN || sclfrq > SCLFRQ_MAX)
+		return -EINVAL;
+
+	if (freq >= 40000000)
+		hldt = 17;
+	else if (freq >= 12500000)
+		hldt = 15;
+	else
+		hldt = 7;
+
+	val = readb(&reg->ctl2) & 0x1;
+	val |= (sclfrq & 0x7F) << 1;
+	writeb(val, &reg->ctl2);
+
+	/* clear 400K_MODE bit */
+	val = readb(&reg->ctl3) & 0xc;
+	val |= (sclfrq >> 7) & 0x3;
+	writeb(val, &reg->ctl3);
+
+	writeb(hldt, &reg->bank0.ctl4);
+
+	return 0;
+}
+
+static int npcm_i2c_set_bus_speed(struct udevice *dev,
+				  unsigned int speed)
+{
+	struct npcm_i2c_bus *bus = dev_get_priv(dev);
+
+	return npcm_i2c_init_clk(bus, speed);
+}
+
+static int npcm_i2c_probe(struct udevice *dev)
+{
+	struct npcm_i2c_bus *bus = dev_get_priv(dev);
+	struct npcm_gcr *gcr = (struct npcm_gcr *)NPCM_GCR_BA;
+	struct npcm_i2c_regs *reg;
+	u32 i2csegctl_val = dev_get_driver_data(dev);
+	struct clk clk;
+	int ret;
+
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret) {
+		printf("%s: ret %d\n", __func__, ret);
+		return ret;
+	}
+	bus->apb_clk = clk_get_rate(&clk);
+	if (bus->apb_clk <= 0) {
+		printf("%s: fail to get rate\n", __func__);
+		return -EINVAL;
+	}
+	clk_free(&clk);
+
+	bus->num = dev->seq_;
+	bus->reg = dev_read_addr_ptr(dev);
+	bus->freq = dev_read_u32_default(dev, "clock-frequency", 100000);
+	bus->started = false;
+	reg = bus->reg;
+
+	if (npcm_i2c_init_clk(bus, bus->freq)) {
+		printf("%s: init_clk failed\n", __func__);
+		return -EINVAL;
+	}
+
+	/* set initial i2csegctl value */
+	writel(i2csegctl_val, &gcr->i2csegctl);
+
+	/* enable SMB module */
+	setbits_8(&reg->ctl2, SMBCTL2_ENABLE);
+
+	/* select register bank 0 */
+	clrbits_8(&reg->ctl3, SMBCTL3_BNK_SEL);
+
+	/* single byte mode */
+	clrbits_8(&reg->bank0.fif_ctl, SMBFIF_CTL_FIFO_EN);
+
+	/* set POLL mode */
+	writeb(0, &reg->ctl1);
+
+	printf("I2C bus %d ready. speed=%d, base=0x%x, apb=%u\n",
+	       bus->num, bus->freq, (u32)(uintptr_t)bus->reg, bus->apb_clk);
+
+	return 0;
+}
+
+static const struct dm_i2c_ops nuvoton_i2c_ops = {
+	.xfer		    = npcm_i2c_xfer,
+	.set_bus_speed	= npcm_i2c_set_bus_speed,
+};
+
+static const struct udevice_id nuvoton_i2c_of_match[] = {
+	{ .compatible = "nuvoton,npcm845-i2c",  .data = NPCM8XX_I2CSEGCTL_INIT_VAL},
+	{ .compatible = "nuvoton,npcm750-i2c",  .data = NPCM7XX_I2CSEGCTL_INIT_VAL},
+	{}
+};
+
+U_BOOT_DRIVER(npcm_i2c_bus) = {
+	.name = "npcm-i2c",
+	.id = UCLASS_I2C,
+	.of_match = nuvoton_i2c_of_match,
+	.probe = npcm_i2c_probe,
+	.priv_auto = sizeof(struct npcm_i2c_bus),
+	.ops = &nuvoton_i2c_ops,
+};