diff options
| author | Ye Li <ye.li@nxp.com> | 2018-10-18 14:28:32 +0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2018-10-22 12:59:02 +0200 |
| commit | cdc16f61823914ff19fdaddf3ca66ad7b159a1bd (patch) | |
| tree | 6e070d35401e765b42406f7221842918e15763c8 /drivers | |
| parent | 126f884903b647f2c349d0e756d70db3b5144249 (diff) | |
| download | u-boot-cdc16f61823914ff19fdaddf3ca66ad7b159a1bd.zip u-boot-cdc16f61823914ff19fdaddf3ca66ad7b159a1bd.tar.gz u-boot-cdc16f61823914ff19fdaddf3ca66ad7b159a1bd.tar.bz2 | |
serial: lpuart: Enable RX and TX FIFO
Enable the RX and TX FIFO in LPUART driver to avoid the input lost
during U-Boot boot up.
Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/serial/serial_lpuart.c | 33 |
1 files changed, 26 insertions, 7 deletions
diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c index c14a810..b28f7cf 100644 --- a/drivers/serial/serial_lpuart.c +++ b/drivers/serial/serial_lpuart.c @@ -40,6 +40,12 @@ #define CTRL_TE (1 << 19) #define CTRL_RE (1 << 18) +#define FIFO_RXFLUSH BIT(14) +#define FIFO_TXFLUSH BIT(15) +#define FIFO_TXSIZE_MASK 0x70 +#define FIFO_TXSIZE_OFF 4 +#define FIFO_RXSIZE_MASK 0x7 +#define FIFO_RXSIZE_OFF 0 #define FIFO_TXFE 0x80 #ifdef CONFIG_ARCH_IMX8 #define FIFO_RXFE 0x08 @@ -47,7 +53,7 @@ #define FIFO_RXFE 0x40 #endif -#define WATER_TXWATER_OFF 1 +#define WATER_TXWATER_OFF 0 #define WATER_RXWATER_OFF 16 DECLARE_GLOBAL_DATA_PTR; @@ -318,15 +324,28 @@ static int _lpuart32_serial_tstc(struct lpuart_serial_platdata *plat) static int _lpuart32_serial_init(struct lpuart_serial_platdata *plat) { struct lpuart_fsl_reg32 *base = (struct lpuart_fsl_reg32 *)plat->reg; - u32 ctrl; + u32 val, tx_fifo_size; - lpuart_read32(plat->flags, &base->ctrl, &ctrl); - ctrl &= ~CTRL_RE; - ctrl &= ~CTRL_TE; - lpuart_write32(plat->flags, &base->ctrl, ctrl); + lpuart_read32(plat->flags, &base->ctrl, &val); + val &= ~CTRL_RE; + val &= ~CTRL_TE; + lpuart_write32(plat->flags, &base->ctrl, val); lpuart_write32(plat->flags, &base->modir, 0); - lpuart_write32(plat->flags, &base->fifo, ~(FIFO_TXFE | FIFO_RXFE)); + + lpuart_read32(plat->flags, &base->fifo, &val); + tx_fifo_size = (val & FIFO_TXSIZE_MASK) >> FIFO_TXSIZE_OFF; + /* Set the TX water to half of FIFO size */ + if (tx_fifo_size > 1) + tx_fifo_size = tx_fifo_size >> 1; + + /* Set RX water to 0, to be triggered by any receive data */ + lpuart_write32(plat->flags, &base->water, + (tx_fifo_size << WATER_TXWATER_OFF)); + + /* Enable TX and RX FIFO */ + val |= (FIFO_TXFE | FIFO_RXFE | FIFO_TXFLUSH | FIFO_RXFLUSH); + lpuart_write32(plat->flags, &base->fifo, val); lpuart_write32(plat->flags, &base->match, 0); |