Merge tag 'xilinx-for-v2024.01-rc1-v3' of https://source.denx.de/u-boot/custodians/u-boot-microblazeWIP/13Oct2023

Xilinx changes for v2024.01-rc1 v3

clk:
- remove additional compatible strings for Versal NET

net:
- zynq_gem: Fix clock calculation for MDC for higher frequencies

pinctrl:
- core: Extend pinmux status buffere size
- zynqmp driver: Show also tristate configuration

test:
- add test case for pxe get

Xilinx:
- describe SelectMAP boot mode

Zynq:
- Fix nand description in DT

ZynqMP:
- DTS sync patches with kernel and also W=1 related fixes
- Add support for KD240, zcu670, e-a2197 with x-prc cards, SC revB/C with i2c
  description for other SC based boards
- k24 psu_init cleanup

5 files changed, 47 insertions, 42 deletions

diff --git a/drivers/clk/clk_versal.c b/drivers/clk/clk_versal.c
index 2e004be..c473643 100644
--- a/drivers/clk/clk_versal.c
+++ b/drivers/clk/clk_versal.c
@@ -773,7 +773,6 @@ static struct clk_ops versal_clk_ops = {
 
 static const struct udevice_id versal_clk_ids[] = {
 	{ .compatible = "xlnx,versal-clk" },
-	{ .compatible = "xlnx,versal-net-clk" },
 	{ }
 };
 
diff --git a/drivers/fpga/zynqmppl.c b/drivers/fpga/zynqmppl.c
index b1f201f..2656f5f 100644
--- a/drivers/fpga/zynqmppl.c
+++ b/drivers/fpga/zynqmppl.c
@@ -2,7 +2,7 @@
 /*
  * (C) Copyright 2015 - 2016, Xilinx, Inc,
  * Michal Simek <michal.simek@amd.com>
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
  */
 
 #include <console.h>
diff --git a/drivers/net/phy/xilinx_phy.c b/drivers/net/phy/xilinx_phy.c
index 1df639d..c07c780 100644
--- a/drivers/net/phy/xilinx_phy.c
+++ b/drivers/net/phy/xilinx_phy.c
@@ -99,7 +99,6 @@ static int xilinxphy_startup(struct phy_device *phydev)
 
 static int xilinxphy_of_init(struct phy_device *phydev)
 {
-	u32 phytype;
 	ofnode node;
 
 	debug("%s\n", __func__);
@@ -107,10 +106,6 @@ static int xilinxphy_of_init(struct phy_device *phydev)
 	if (!ofnode_valid(node))
 		return -EINVAL;
 
-	phytype = ofnode_read_u32_default(node, "xlnx,phy-type", -1);
-	if (phytype == XAE_PHY_TYPE_1000BASE_X)
-		phydev->flags |= XAE_PHY_TYPE_1000BASE_X;
-
 	return 0;
 }
 
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 3377e66..7c57d32 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -321,11 +321,38 @@ static int zynq_gem_setup_mac(struct udevice *dev)
 	return 0;
 }
 
+static u32 gem_mdc_clk_div(struct zynq_gem_priv *priv)
+{
+	u32 config;
+	unsigned long pclk_hz;
+
+	pclk_hz = clk_get_rate(&priv->pclk);
+	if (pclk_hz <= 20000000)
+		config = GEM_MDC_SET(GEM_CLK_DIV8);
+	else if (pclk_hz <= 40000000)
+		config = GEM_MDC_SET(GEM_CLK_DIV16);
+	else if (pclk_hz <= 80000000)
+		config = GEM_MDC_SET(GEM_CLK_DIV32);
+	else if (pclk_hz <= 120000000)
+		config = GEM_MDC_SET(GEM_CLK_DIV48);
+	else if (pclk_hz <= 160000000)
+		config = GEM_MDC_SET(GEM_CLK_DIV64);
+	else if (pclk_hz <= 240000000)
+		config = GEM_MDC_SET(GEM_CLK_DIV96);
+	else if (pclk_hz <= 320000000)
+		config = GEM_MDC_SET(GEM_CLK_DIV128);
+	else
+		config = GEM_MDC_SET(GEM_CLK_DIV224);
+
+	return config;
+}
+
 static int zynq_phy_init(struct udevice *dev)
 {
-	int ret;
+	int ret, val;
 	struct zynq_gem_priv *priv = dev_get_priv(dev);
 	struct zynq_gem_regs *regs_mdio = priv->mdiobase;
+	struct zynq_gem_regs *regs = priv->iobase;
 	const u32 supported = SUPPORTED_10baseT_Half |
 			SUPPORTED_10baseT_Full |
 			SUPPORTED_100baseT_Half |
@@ -333,6 +360,10 @@ static int zynq_phy_init(struct udevice *dev)
 			SUPPORTED_1000baseT_Half |
 			SUPPORTED_1000baseT_Full;
 
+	val = gem_mdc_clk_div(priv);
+	if (val)
+		writel(val, &regs->nwcfg);
+
 	/* Enable only MDIO bus */
 	writel(ZYNQ_GEM_NWCTRL_MDEN_MASK, &regs_mdio->nwctrl);
 
@@ -360,35 +391,10 @@ static int zynq_phy_init(struct udevice *dev)
 	return phy_config(priv->phydev);
 }
 
-static u32 gem_mdc_clk_div(struct zynq_gem_priv *priv)
-{
-	u32 config;
-	unsigned long pclk_hz;
-
-	pclk_hz = clk_get_rate(&priv->pclk);
-	if (pclk_hz <= 20000000)
-		config = GEM_MDC_SET(GEM_CLK_DIV8);
-	else if (pclk_hz <= 40000000)
-		config = GEM_MDC_SET(GEM_CLK_DIV16);
-	else if (pclk_hz <= 80000000)
-		config = GEM_MDC_SET(GEM_CLK_DIV32);
-	else if (pclk_hz <= 120000000)
-		config = GEM_MDC_SET(GEM_CLK_DIV48);
-	else if (pclk_hz <= 160000000)
-		config = GEM_MDC_SET(GEM_CLK_DIV64);
-	else if (pclk_hz <= 240000000)
-		config = GEM_MDC_SET(GEM_CLK_DIV96);
-	else if (pclk_hz <= 320000000)
-		config = GEM_MDC_SET(GEM_CLK_DIV128);
-	else
-		config = GEM_MDC_SET(GEM_CLK_DIV224);
-
-	return config;
-}
 
 static int zynq_gem_init(struct udevice *dev)
 {
-	u32 i, nwconfig;
+	u32 i, nwconfig, nwcfg;
 	int ret;
 	unsigned long clk_rate = 0;
 	struct zynq_gem_priv *priv = dev_get_priv(dev);
@@ -494,8 +500,7 @@ static int zynq_gem_init(struct udevice *dev)
 		return -1;
 	}
 
-	nwconfig = gem_mdc_clk_div(priv);
-	nwconfig |= ZYNQ_GEM_NWCFG_INIT;
+	nwconfig = ZYNQ_GEM_NWCFG_INIT;
 
 	/*
 	 * Set SGMII enable PCS selection only if internal PCS/PMA
@@ -509,19 +514,21 @@ static int zynq_gem_init(struct udevice *dev)
 
 	switch (priv->phydev->speed) {
 	case SPEED_1000:
-		writel(nwconfig | ZYNQ_GEM_NWCFG_SPEED1000,
-		       &regs->nwcfg);
+		nwconfig |= ZYNQ_GEM_NWCFG_SPEED1000;
 		clk_rate = ZYNQ_GEM_FREQUENCY_1000;
 		break;
 	case SPEED_100:
-		writel(nwconfig | ZYNQ_GEM_NWCFG_SPEED100,
-		       &regs->nwcfg);
+		nwconfig |= ZYNQ_GEM_NWCFG_SPEED100;
 		clk_rate = ZYNQ_GEM_FREQUENCY_100;
 		break;
 	case SPEED_10:
 		clk_rate = ZYNQ_GEM_FREQUENCY_10;
 		break;
 	}
+	nwcfg = readl(&regs->nwcfg);
+	nwcfg |= nwconfig;
+	if (nwcfg)
+		writel(nwcfg, &regs->nwcfg);
 
 #ifdef CONFIG_ARM64
 	if (priv->interface == PHY_INTERFACE_MODE_SGMII &&
diff --git a/drivers/pinctrl/pinctrl-zynqmp.c b/drivers/pinctrl/pinctrl-zynqmp.c
index 5170359..eb17a42 100644
--- a/drivers/pinctrl/pinctrl-zynqmp.c
+++ b/drivers/pinctrl/pinctrl-zynqmp.c
@@ -548,6 +548,8 @@ static int zynqmp_pinctrl_get_pin_muxing(struct udevice *dev,
 				     &pinmux.drive_strength);
 	zynqmp_pm_pinctrl_get_config(selector, PM_PINCTRL_CONFIG_VOLTAGE_STATUS,
 				     &pinmux.volt_sts);
+	zynqmp_pm_pinctrl_get_config(selector, PM_PINCTRL_CONFIG_TRI_STATE,
+				     &pinmux.tri_state);
 
 	switch (pinmux.drive_strength) {
 	case PM_PINCTRL_DRIVE_STRENGTH_2MA:
@@ -568,13 +570,15 @@ static int zynqmp_pinctrl_get_pin_muxing(struct udevice *dev,
 		return -EINVAL;
 	}
 
-	snprintf(buf, size, "slew:%s\tbias:%s\tpull:%s\tinput:%s\tdrive:%dmA\tvolt:%s",
+	snprintf(buf, size,
+		 "slew:%s\tbias:%s\tpull:%s\tinput:%s\tdrive:%dmA\tvolt:%s\ttri_state:%s",
 		 pinmux.slew ? "slow" : "fast",
 		 pinmux.bias ? "enabled" : "disabled",
 		 pinmux.pull_ctrl ? "up" : "down",
 		 pinmux.input_type ? "schmitt" : "cmos",
 		 pinmux.drive_strength,
-		 pinmux.volt_sts ? "1.8" : "3.3");
+		 pinmux.volt_sts ? "1.8" : "3.3",
+		 pinmux.tri_state ? "enabled" : "disabled");
 
 	return 0;
 }