nand: Remove unused ppc4xx NAND driver and references

ppc4xx support was removed some time ago. Lets remove the now unused
NAND driver and all its references for this platform as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Scott Wood <oss@buserror.net>

3 files changed, 0 insertions, 217 deletions

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 9f7d9d6..332d905 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -57,7 +57,6 @@ obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o
 obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o
 obj-$(CONFIG_NAND_MXC) += mxc_nand.o
 obj-$(CONFIG_NAND_MXS) += mxs_nand.o
-obj-$(CONFIG_NAND_NDFC) += ndfc.o
 obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
 obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
 obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 8b548b2..13a6535 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -29,11 +29,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand_ecc.h>
 
-/* The PPC4xx NDFC uses Smart Media (SMC) bytes order */
-#ifdef CONFIG_NAND_NDFC
-#define CONFIG_MTD_NAND_ECC_SMC
-#endif
-
 /*
  * NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(),
  * only nand_correct_data() is needed
@@ -110,13 +105,8 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 	tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
 
 	/* Calculate final ECC code */
-#ifdef CONFIG_MTD_NAND_ECC_SMC
-	ecc_code[0] = ~tmp2;
-	ecc_code[1] = ~tmp1;
-#else
 	ecc_code[0] = ~tmp1;
 	ecc_code[1] = ~tmp2;
-#endif
 	ecc_code[2] = ((~reg1) << 2) | 0x03;
 
 	return 0;
@@ -146,15 +136,9 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat,
 {
 	uint8_t s0, s1, s2;
 
-#ifdef CONFIG_MTD_NAND_ECC_SMC
-	s0 = calc_ecc[0] ^ read_ecc[0];
-	s1 = calc_ecc[1] ^ read_ecc[1];
-	s2 = calc_ecc[2] ^ read_ecc[2];
-#else
 	s1 = calc_ecc[0] ^ read_ecc[0];
 	s0 = calc_ecc[1] ^ read_ecc[1];
 	s2 = calc_ecc[2] ^ read_ecc[2];
-#endif
 	if ((s0 | s1 | s2) == 0)
 		return 0;
 
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
deleted file mode 100644
index 0a9849e..0000000
--- a/drivers/mtd/nand/ndfc.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Overview:
- *   Platform independent driver for NDFC (NanD Flash Controller)
- *   integrated into IBM/AMCC PPC4xx cores
- *
- * (C) Copyright 2006-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Based on original work by
- *	Thomas Gleixner
- *	Copyright 2006 IBM
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <nand.h>
-#include <linux/mtd/ndfc.h>
-#include <linux/mtd/nand_ecc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx.h>
-
-#ifndef CONFIG_SYS_NAND_BCR
-#define CONFIG_SYS_NAND_BCR 0x80002222
-#endif
-#ifndef CONFIG_SYS_NDFC_EBC0_CFG
-#define CONFIG_SYS_NDFC_EBC0_CFG 0xb8400000
-#endif
-
-/*
- * We need to store the info, which chip-select (CS) is used for the
- * chip number. For example on Sequoia NAND chip #0 uses
- * CS #3.
- */
-static int ndfc_cs[NDFC_MAX_BANKS];
-
-static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd_to_nand(mtd);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		out_8((u8 *)(base + NDFC_CMD), cmd & 0xFF);
-	else
-		out_8((u8 *)(base + NDFC_ALE), cmd & 0xFF);
-}
-
-static int ndfc_dev_ready(struct mtd_info *mtdinfo)
-{
-	struct nand_chip *this = mtd_to_nand(mtdinfo);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-
-	return (in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY);
-}
-
-static void ndfc_enable_hwecc(struct mtd_info *mtdinfo, int mode)
-{
-	struct nand_chip *this = mtd_to_nand(mtdinfo);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-	u32 ccr;
-
-	ccr = in_be32((u32 *)(base + NDFC_CCR));
-	ccr |= NDFC_CCR_RESET_ECC;
-	out_be32((u32 *)(base + NDFC_CCR), ccr);
-}
-
-static int ndfc_calculate_ecc(struct mtd_info *mtdinfo,
-			      const u_char *dat, u_char *ecc_code)
-{
-	struct nand_chip *this = mtd_to_nand(mtdinfo);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-	u32 ecc;
-	u8 *p = (u8 *)&ecc;
-
-	ecc = in_be32((u32 *)(base + NDFC_ECC));
-
-	/* The NDFC uses Smart Media (SMC) bytes order
-	 */
-	ecc_code[0] = p[1];
-	ecc_code[1] = p[2];
-	ecc_code[2] = p[3];
-
-	return 0;
-}
-
-/*
- * Speedups for buffer read/write/verify
- *
- * NDFC allows 32bit read/write of data. So we can speed up the buffer
- * functions. No further checking, as nand_base will always read/write
- * page aligned.
- */
-static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtd_to_nand(mtdinfo);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-	uint32_t *p = (uint32_t *) buf;
-
-	for (;len > 0; len -= 4)
-		*p++ = in_be32((u32 *)(base + NDFC_DATA));
-}
-
-/*
- * Don't use these speedup functions in NAND boot image, since the image
- * has to fit into 4kByte.
- */
-static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtd_to_nand(mtdinfo);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-	uint32_t *p = (uint32_t *) buf;
-
-	for (; len > 0; len -= 4)
-		out_be32((u32 *)(base + NDFC_DATA), *p++);
-}
-
-/*
- * Read a byte from the NDFC.
- */
-static uint8_t ndfc_read_byte(struct mtd_info *mtd)
-{
-
-	struct nand_chip *chip = mtd_to_nand(mtd);
-
-#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
-	return (uint8_t) readw(chip->IO_ADDR_R);
-#else
-	return readb(chip->IO_ADDR_R);
-#endif
-
-}
-
-void board_nand_select_device(struct nand_chip *nand, int chip)
-{
-	/*
-	 * Don't use "chip" to address the NAND device,
-	 * generate the cs from the address where it is encoded.
-	 */
-	ulong base = (ulong)nand->IO_ADDR_W & 0xffffff00;
-	int cs = ndfc_cs[chip];
-
-	/* Set NandFlash Core Configuration Register */
-	/* 1 col x 2 rows */
-	out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24));
-	out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), CONFIG_SYS_NAND_BCR);
-}
-
-static void ndfc_select_chip(struct mtd_info *mtd, int chip)
-{
-	/*
-	 * Nothing to do here!
-	 */
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
-	ulong base = (ulong)nand->IO_ADDR_W & 0xffffff00;
-	static int chip = 0;
-
-	/*
-	 * Save chip-select for this chip #
-	 */
-	ndfc_cs[chip] = cs;
-
-	/*
-	 * Select required NAND chip in NDFC
-	 */
-	board_nand_select_device(nand, chip);
-
-	nand->IO_ADDR_R = (void __iomem *)(base + NDFC_DATA);
-	nand->IO_ADDR_W = (void __iomem *)(base + NDFC_DATA);
-	nand->cmd_ctrl = ndfc_hwcontrol;
-	nand->chip_delay = 50;
-	nand->read_buf = ndfc_read_buf;
-	nand->dev_ready = ndfc_dev_ready;
-	nand->ecc.correct = nand_correct_data;
-	nand->ecc.hwctl = ndfc_enable_hwecc;
-	nand->ecc.calculate = ndfc_calculate_ecc;
-	nand->ecc.mode = NAND_ECC_HW;
-	nand->ecc.size = 256;
-	nand->ecc.bytes = 3;
-	nand->ecc.strength = 1;
-	nand->select_chip = ndfc_select_chip;
-
-#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
-	nand->options |= NAND_BUSWIDTH_16;
-#endif
-
-	nand->write_buf  = ndfc_write_buf;
-	nand->read_byte = ndfc_read_byte;
-
-	chip++;
-
-	return 0;
-}