avr32: Retire AVR32 for good

AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

6 files changed, 7 insertions, 15 deletions

diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index de3758d..50597a7 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -17,8 +17,9 @@
  */
 
 #include <common.h>
-#if defined(CONFIG_AVR32)
-#include <asm/arch/portmux.h>
+#ifdef	CONFIG_MPC8260			/* only valid for MPC8260 */
+#include <ioports.h>
+#include <asm/io.h>
 #endif
 #if defined(CONFIG_AT91FAMILY)
 #include <asm/io.h>
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index bef864f..fe01c73 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -37,8 +37,8 @@ config ATMEL_SPI
 	depends on ARCH_AT91
 	help
 	  This enables driver for the Atmel SPI Controller, present on
-	  many AT32 (AVR32) and AT91 (ARM) chips. This driver can be
-	  used to access the SPI Flash, such as AT25DF321.
+	  many AT91 (ARM) chips. This driver can be used to access
+	  the SPI Flash, such as AT25DF321.
 
 config CADENCE_QSPI
 	bool "Cadence QSPI driver"
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index 92e462d..c6d12d3 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -44,13 +44,8 @@
 #define USBA_REMOTE_WAKE_UP			(1 << 10)
 #define USBA_PULLD_DIS				(1 << 11)
 
-#if defined(CONFIG_AVR32)
-#define USBA_ENABLE_MASK			USBA_EN_USBA
-#define USBA_DISABLE_MASK			0
-#elif defined(CONFIG_AT91FAMILY)
 #define USBA_ENABLE_MASK			(USBA_EN_USBA | USBA_PULLD_DIS)
 #define USBA_DISABLE_MASK			USBA_DETACH
-#endif /* CONFIG_ARCH_AT91 */
 
 /* Bitfields in FNUM */
 #define USBA_MICRO_FRAME_NUM_OFFSET		0
diff --git a/drivers/usb/musb-new/musb_io.h b/drivers/usb/musb-new/musb_io.h
index 7668212..a4f4a6f 100644
--- a/drivers/usb/musb-new/musb_io.h
+++ b/drivers/usb/musb-new/musb_io.h
@@ -22,7 +22,7 @@
 #endif
 
 #if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
-	&& !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
+	&& !defined(CONFIG_PPC32) \
 	&& !defined(CONFIG_PPC64) && !defined(CONFIG_MIPS) \
 	&& !defined(CONFIG_M68K)
 static inline void readsl(const void __iomem *addr, void *buf, int len)
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index ed2bd30..2b9482a 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -150,11 +150,7 @@ static void atmel_fb_init(ulong addr, struct display_timing *timing, int bpix,
 			    value << ATMEL_LCDC_CLKVAL_OFFSET);
 
 	/* Initialize control register 2 */
-#ifdef CONFIG_AVR32
-	value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
-#else
 	value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
-#endif
 	if (tft)
 		value |= ATMEL_LCDC_DISTYPE_TFT;
 
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index d75abb6..f548020 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -1968,7 +1968,7 @@ static void *video_logo(void)
 static int cfb_fb_is_in_dram(void)
 {
 	bd_t *bd = gd->bd;
-#if defined(CONFIG_ARM) || defined(CONFIG_AVR32) || defined(CONFIG_NDS32) || \
+#if defined(CONFIG_ARM) || defined(CONFIG_NDS32) || \
 defined(CONFIG_SANDBOX) || defined(CONFIG_X86)
 	ulong start, end;
 	int i;