Merge tag 'xilinx-for-v2020.07-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2020.07-rc2

mmc:
- Fix dt property handling via generic function

clk:
- Fix versal watchdog clock setting

nand:
- Fix zynq nand command comparison

xilinx:
- Enable ubifs
- Sync board_late_init configurations with initrd_high setup
- Make custom distro boot more verbose

zynq:
- Kconfig alignments
- Fix nand cse configuration

zynqmp:
- Fix zcu104 low level qspi configuration
- Small DT updates

Signed-off-by: Tom Rini <trini@konsulko.com>

4 files changed, 12 insertions, 13 deletions

diff --git a/drivers/clk/clk_versal.c b/drivers/clk/clk_versal.c
index d3673a5..075a083 100644
--- a/drivers/clk/clk_versal.c
+++ b/drivers/clk/clk_versal.c
@@ -503,6 +503,9 @@ static u64 versal_clock_calc(u32 clk_id)
 	     NODE_CLASS_MASK) == NODE_SUBCLASS_CLOCK_REF)
 		return versal_clock_ref(clk_id);
 
+	if (!parent_id)
+		return 0;
+
 	clk_rate = versal_clock_calc(parent_id);
 
 	if (versal_clock_div(clk_id)) {
@@ -526,7 +529,7 @@ static int versal_clock_get_rate(u32 clk_id, u64 *clk_rate)
 	     NODE_CLASS_MASK) == NODE_SUBCLASS_CLOCK_OUT &&
 	    ((clk_id >> NODE_CLASS_SHIFT) &
 	     NODE_CLASS_MASK) == NODE_CLASS_CLOCK) {
-		if (!versal_clock_gate(clk_id))
+		if (!versal_clock_gate(clk_id) && !versal_clock_mux(clk_id))
 			return -EINVAL;
 		*clk_rate = versal_clock_calc(clk_id);
 		return 0;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 520c9f9..372dc0a 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -839,8 +839,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 		cfg->host_caps &= ~MMC_MODE_HS_52MHz;
 	}
 
-	if (!(cfg->voltages & MMC_VDD_165_195) ||
-	    (host->quirks & SDHCI_QUIRK_NO_1_8_V))
+	if (!(cfg->voltages & MMC_VDD_165_195))
 		caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
 			    SDHCI_SUPPORT_DDR50);
 
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index da3ff53..18925d0 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -22,14 +22,12 @@ DECLARE_GLOBAL_DATA_PTR;
 struct arasan_sdhci_plat {
 	struct mmc_config cfg;
 	struct mmc mmc;
-	unsigned int f_max;
 };
 
 struct arasan_sdhci_priv {
 	struct sdhci_host *host;
 	u8 deviceid;
 	u8 bank;
-	u8 no_1p8;
 };
 
 #if defined(CONFIG_ARCH_ZYNQMP)
@@ -238,8 +236,11 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
 #endif
 
-	if (priv->no_1p8)
-		host->quirks |= SDHCI_QUIRK_NO_1_8_V;
+	plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ;
+
+	ret = mmc_of_parse(dev, &plat->cfg);
+	if (ret)
+		return ret;
 
 	host->max_clk = clock;
 
@@ -247,7 +248,7 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	host->mmc->dev = dev;
 	host->mmc->priv = host;
 
-	ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
+	ret = sdhci_setup_cfg(&plat->cfg, host, plat->cfg.f_max,
 			      CONFIG_ZYNQ_SDHCI_MIN_FREQ);
 	if (ret)
 		return ret;
@@ -258,7 +259,6 @@ static int arasan_sdhci_probe(struct udevice *dev)
 
 static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
 {
-	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
 	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
 
 	priv->host = calloc(1, sizeof(struct sdhci_host));
@@ -277,10 +277,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
 
 	priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
 	priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1);
-	priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");
 
-	plat->f_max = dev_read_u32_default(dev, "max-frequency",
-					   CONFIG_ZYNQ_SDHCI_MAX_FREQ);
 	return 0;
 }
 
diff --git a/drivers/mtd/nand/raw/zynq_nand.c b/drivers/mtd/nand/raw/zynq_nand.c
index 0aea83d..3941297 100644
--- a/drivers/mtd/nand/raw/zynq_nand.c
+++ b/drivers/mtd/nand/raw/zynq_nand.c
@@ -845,7 +845,7 @@ static void zynq_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
 	if (curr_cmd->end_cmd_valid == ZYNQ_NAND_CMD_PHASE)
 		end_cmd_valid = 1;
 
-	if (curr_cmd->end_cmd == NAND_CMD_NONE)
+	if (curr_cmd->end_cmd == (u8)NAND_CMD_NONE)
 		end_cmd = 0x0;
 	else
 		end_cmd = curr_cmd->end_cmd;