diff options
author | Jagan Teki <jagan@amarulasolutions.com> | 2020-05-26 08:34:37 +0530 |
---|---|---|
committer | Jagan Teki <jagan@amarulasolutions.com> | 2020-06-11 15:14:04 +0530 |
commit | 726c0343a8f3f0496e51da7e5d550aa982c9f288 (patch) | |
tree | 89db659b404f0037abe8b87d8991f2181fe6e00c /drivers/spi | |
parent | 7e07b3727763e14296fa6846df041a24d99a753e (diff) | |
download | u-boot-726c0343a8f3f0496e51da7e5d550aa982c9f288.zip u-boot-726c0343a8f3f0496e51da7e5d550aa982c9f288.tar.gz u-boot-726c0343a8f3f0496e51da7e5d550aa982c9f288.tar.bz2 |
spi: Zap SOFT_SPI (non-dm)
- Deadline for DM migration already passed by months.
- Sent couple of zap patches and
- No response on dm conversation
hence removed the driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/Kconfig | 13 | ||||
-rw-r--r-- | drivers/spi/Makefile | 1 | ||||
-rw-r--r-- | drivers/spi/soft_spi_legacy.c | 168 |
3 files changed, 6 insertions, 176 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ff431a2..d32858b 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -286,6 +286,12 @@ config SPI_SIFIVE The SiFive SPI controller driver is found on various SiFive SoCs. +config SOFT_SPI + bool "Soft SPI driver" + help + Enable Soft SPI driver. This driver is to use GPIO simulate + the SPI protocol. + config SPI_SUNXI bool "Allwinner SoC SPI controllers" default ARCH_SUNXI @@ -391,13 +397,6 @@ config ZYNQMP_GQSPI endif # if DM_SPI -config SOFT_SPI - bool "Soft SPI driver" - depends on DM_SPI || (DEPRECATED && !DM_SPI) - help - Enable Soft SPI driver. This driver is to use GPIO simulate - the SPI protocol. - config FSL_ESPI bool "Freescale eSPI driver" imply SPI_FLASH_BAR diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 3427764..54881a7 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_TI_QSPI) += ti_qspi.o else obj-y += spi.o obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o -obj-$(CONFIG_SOFT_SPI) += soft_spi_legacy.o endif obj-$(CONFIG_ALTERA_SPI) += altera_spi.o diff --git a/drivers/spi/soft_spi_legacy.c b/drivers/spi/soft_spi_legacy.c deleted file mode 100644 index cc5ab5f..0000000 --- a/drivers/spi/soft_spi_legacy.c +++ /dev/null @@ -1,168 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2002 - * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. - * - * Influenced by code from: - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include <common.h> -#include <spi.h> - -#include <malloc.h> - -/*----------------------------------------------------------------------- - * Definitions - */ - -#ifdef DEBUG_SPI -#define PRINTD(fmt,args...) printf (fmt ,##args) -#else -#define PRINTD(fmt,args...) -#endif - -struct soft_spi_slave { - struct spi_slave slave; - unsigned int mode; -}; - -static inline struct soft_spi_slave *to_soft_spi(struct spi_slave *slave) -{ - return container_of(slave, struct soft_spi_slave, slave); -} - -/*=====================================================================*/ -/* Public Functions */ -/*=====================================================================*/ - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct soft_spi_slave *ss; - - if (!spi_cs_is_valid(bus, cs)) - return NULL; - - ss = spi_alloc_slave(struct soft_spi_slave, bus, cs); - if (!ss) - return NULL; - - ss->mode = mode; - - /* TODO: Use max_hz to limit the SCK rate */ - - return &ss->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct soft_spi_slave *ss = to_soft_spi(slave); - - free(ss); -} - -int spi_claim_bus(struct spi_slave *slave) -{ -#ifdef CONFIG_SYS_IMMR - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; -#endif - struct soft_spi_slave *ss = to_soft_spi(slave); - - /* - * Make sure the SPI clock is in idle state as defined for - * this slave. - */ - if (ss->mode & SPI_CPOL) - SPI_SCL(1); - else - SPI_SCL(0); - - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - /* Nothing to do */ -} - -/*----------------------------------------------------------------------- - * SPI transfer - * - * This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks - * "bitlen" bits in the SPI MISO port. That's just the way SPI works. - * - * The source of the outgoing bits is the "dout" parameter and the - * destination of the input bits is the "din" parameter. Note that "dout" - * and "din" can point to the same memory location, in which case the - * input data overwrites the output data (since both are buffered by - * temporary variables, this is OK). - */ -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ -#ifdef CONFIG_SYS_IMMR - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; -#endif - struct soft_spi_slave *ss = to_soft_spi(slave); - uchar tmpdin = 0; - uchar tmpdout = 0; - const u8 *txd = dout; - u8 *rxd = din; - int cpol = ss->mode & SPI_CPOL; - int cpha = ss->mode & SPI_CPHA; - unsigned int j; - - PRINTD("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n", - slave->bus, slave->cs, *(uint *)txd, *(uint *)rxd, bitlen); - - if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); - - for(j = 0; j < bitlen; j++) { - /* - * Check if it is time to work on a new byte. - */ - if ((j % 8) == 0) { - if (txd) - tmpdout = *txd++; - else - tmpdout = 0; - if(j != 0) { - if (rxd) - *rxd++ = tmpdin; - } - tmpdin = 0; - } - - if (!cpha) - SPI_SCL(!cpol); - SPI_SDA(tmpdout & 0x80); - SPI_DELAY; - if (cpha) - SPI_SCL(!cpol); - else - SPI_SCL(cpol); - tmpdin <<= 1; - tmpdin |= SPI_READ; - tmpdout <<= 1; - SPI_DELAY; - if (cpha) - SPI_SCL(cpol); - } - /* - * If the number of bits isn't a multiple of 8, shift the last - * bits over to left-justify them. Then store the last byte - * read in. - */ - if (rxd) { - if ((bitlen % 8) != 0) - tmpdin <<= 8 - (bitlen % 8); - *rxd++ = tmpdin; - } - - if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); - - return(0); -} |