qe: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 119 deletions

diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h
deleted file mode 100644
index 99f8458..0000000
--- a/drivers/qe/uccf.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on source code of Shlomi Gridish
- */
-
-#ifndef __UCCF_H__
-#define __UCCF_H__
-
-#include "common.h"
-#include "linux/immap_qe.h"
-#include <fsl_qe.h>
-
-/* Fast or Giga ethernet */
-enum enet_type {
-	FAST_ETH,
-	GIGA_ETH,
-};
-
-/* General UCC Extended Mode Register */
-#define UCC_GUEMR_MODE_MASK_RX		0x02
-#define UCC_GUEMR_MODE_MASK_TX		0x01
-#define UCC_GUEMR_MODE_FAST_RX		0x02
-#define UCC_GUEMR_MODE_FAST_TX		0x01
-#define UCC_GUEMR_MODE_SLOW_RX		0x00
-#define UCC_GUEMR_MODE_SLOW_TX		0x00
-/* Bit 3 must be set 1 */
-#define UCC_GUEMR_SET_RESERVED3		0x10
-
-/* General UCC FAST Mode Register */
-#define UCC_FAST_GUMR_TCI		0x20000000
-#define UCC_FAST_GUMR_TRX		0x10000000
-#define UCC_FAST_GUMR_TTX		0x08000000
-#define UCC_FAST_GUMR_CDP		0x04000000
-#define UCC_FAST_GUMR_CTSP		0x02000000
-#define UCC_FAST_GUMR_CDS		0x01000000
-#define UCC_FAST_GUMR_CTSS		0x00800000
-#define UCC_FAST_GUMR_TXSY		0x00020000
-#define UCC_FAST_GUMR_RSYN		0x00010000
-#define UCC_FAST_GUMR_RTSM		0x00002000
-#define UCC_FAST_GUMR_REVD		0x00000400
-#define UCC_FAST_GUMR_ENR		0x00000020
-#define UCC_FAST_GUMR_ENT		0x00000010
-
-/* GUMR [MODE] bit maps */
-#define UCC_FAST_GUMR_HDLC		0x00000000
-#define UCC_FAST_GUMR_QMC		0x00000002
-#define UCC_FAST_GUMR_UART		0x00000004
-#define UCC_FAST_GUMR_BISYNC		0x00000008
-#define UCC_FAST_GUMR_ATM		0x0000000a
-#define UCC_FAST_GUMR_ETH		0x0000000c
-
-/* Transmit On Demand (UTORD) */
-#define UCC_SLOW_TOD			0x8000
-#define UCC_FAST_TOD			0x8000
-
-/* Fast Ethernet (10/100 Mbps) */
-/* Rx virtual FIFO size */
-#define UCC_GETH_URFS_INIT		512
-/* 1/2 urfs */
-#define UCC_GETH_URFET_INIT		256
-/* 3/4 urfs */
-#define UCC_GETH_URFSET_INIT		384
-/* Tx virtual FIFO size */
-#define UCC_GETH_UTFS_INIT		512
-/* 1/2 utfs */
-#define UCC_GETH_UTFET_INIT		256
-#define UCC_GETH_UTFTT_INIT		128
-
-/* Gigabit Ethernet (1000 Mbps) */
-/* Rx virtual FIFO size */
-#define UCC_GETH_URFS_GIGA_INIT		4096/*2048*/
-/* 1/2 urfs */
-#define UCC_GETH_URFET_GIGA_INIT	2048/*1024*/
-/* 3/4 urfs */
-#define UCC_GETH_URFSET_GIGA_INIT	3072/*1536*/
-/* Tx virtual FIFO size */
-#define UCC_GETH_UTFS_GIGA_INIT		8192/*2048*/
-/* 1/2 utfs */
-#define UCC_GETH_UTFET_GIGA_INIT	4096/*1024*/
-#define UCC_GETH_UTFTT_GIGA_INIT	0x400/*0x40*/
-
-/* UCC fast alignment */
-#define UCC_FAST_RX_ALIGN			4
-#define UCC_FAST_MRBLR_ALIGNMENT		4
-#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
-
-/* Sizes */
-#define UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD	8
-
-/* UCC fast structure. */
-struct ucc_fast_inf {
-	int		ucc_num;
-	qe_clock_e	rx_clock;
-	qe_clock_e	tx_clock;
-	enum enet_type	eth_type;
-};
-
-struct ucc_fast_priv {
-	struct ucc_fast_inf	*uf_info;
-	ucc_fast_t	*uf_regs; /* a pointer to memory map of UCC regs */
-	u32		*p_ucce; /* a pointer to the event register */
-	u32		*p_uccm; /* a pointer to the mask register */
-	int		enabled_tx; /* whether UCC is enabled for Tx (ENT) */
-	int		enabled_rx; /* whether UCC is enabled for Rx (ENR) */
-	u32		ucc_fast_tx_virtual_fifo_base_offset;
-	u32		ucc_fast_rx_virtual_fifo_base_offset;
-};
-
-void ucc_fast_transmit_on_demand(struct ucc_fast_priv *uccf);
-u32 ucc_fast_get_qe_cr_subblock(int ucc_num);
-void ucc_fast_enable(struct ucc_fast_priv *uccf, comm_dir_e mode);
-void ucc_fast_disable(struct ucc_fast_priv *uccf, comm_dir_e mode);
-int ucc_fast_init(struct ucc_fast_inf *uf_info,
-		  struct ucc_fast_priv **uccf_ret);
-
-#endif /* __UCCF_H__ */