pci: Update to use new sequence numbers

Now that we know the sequence number at bind time, there is no need for
special-case code in dm_pci_hose_probe_bus().

Note: the PCI_CAP_ID_EA code may need a look, but there are no test
failures so I have left it as is.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 27 insertions, 18 deletions

diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index ebe7fb7..bff183e 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -14,6 +14,7 @@
 #include <asm/io.h>
 #include <dm/device-internal.h>
 #include <dm/lists.h>
+#include <dm/uclass-internal.h>
 #if defined(CONFIG_X86) && defined(CONFIG_HAVE_FSP)
 #include <asm/fsp/fsp_support.h>
 #endif
@@ -544,7 +545,7 @@ int pci_auto_config_devices(struct udevice *bus)
 			continue;
 		ret = dm_pciauto_config_device(dev);
 		if (ret < 0)
-			return ret;
+			return log_msg_ret("auto", ret);
 		max_bus = ret;
 		sub_bus = max(sub_bus, max_bus);
 
@@ -554,7 +555,7 @@ int pci_auto_config_devices(struct udevice *bus)
 	}
 	debug("%s: done\n", __func__);
 
-	return sub_bus;
+	return log_msg_ret("sub", sub_bus);
 }
 
 int pci_generic_mmap_write_config(
@@ -641,17 +642,9 @@ int dm_pci_hose_probe_bus(struct udevice *bus)
 	if (ret) {
 		debug("%s: Cannot probe bus %s: %d\n", __func__, bus->name,
 		      ret);
-		return ret;
+		return log_msg_ret("probe", ret);
 	}
 
-	if (!ea_pos) {
-		if (sub_bus != dev_seq(bus)) {
-			debug("%s: Internal error, bus '%s' got seq %d, expected %d\n",
-			      __func__, bus->name, dev_seq(bus), sub_bus);
-			return -EPIPE;
-		}
-		sub_bus = pci_get_bus_max();
-	}
 	dm_pciauto_postscan_setup_bridge(bus, sub_bus);
 
 	return sub_bus;
@@ -714,7 +707,7 @@ static int pci_find_and_bind_driver(struct udevice *parent,
 
 	if (ofnode_valid(node) && !ofnode_is_available(node)) {
 		debug("%s: Ignoring disabled device\n", __func__);
-		return -EPERM;
+		return log_msg_ret("dis", -EPERM);
 	}
 
 	start = ll_entry_start(struct pci_driver_entry, pci_driver_entry);
@@ -740,7 +733,7 @@ static int pci_find_and_bind_driver(struct udevice *parent,
 			 */
 			if (!(gd->flags & GD_FLG_RELOC) &&
 			    !(drv->flags & DM_FLAG_PRE_RELOC))
-				return -EPERM;
+				return log_msg_ret("pre", -EPERM);
 
 			/*
 			 * We could pass the descriptor to the driver as
@@ -768,7 +761,7 @@ static int pci_find_and_bind_driver(struct udevice *parent,
 	 * limited (ie: using Cache As RAM).
 	 */
 	if (!(gd->flags & GD_FLG_RELOC) && !bridge)
-		return -EPERM;
+		return log_msg_ret("notbr", -EPERM);
 
 	/* Bind a generic driver so that the device can be used */
 	sprintf(name, "pci_%x:%x.%x", dev_seq(parent), PCI_DEV(bdf),
@@ -1009,11 +1002,26 @@ static void decode_regions(struct pci_controller *hose, ofnode parent_node,
 static int pci_uclass_pre_probe(struct udevice *bus)
 {
 	struct pci_controller *hose;
+	struct uclass *uc;
+	int ret;
 
 	debug("%s, bus=%d/%s, parent=%s\n", __func__, dev_seq(bus), bus->name,
 	      bus->parent->name);
 	hose = bus->uclass_priv;
 
+	/*
+	 * Set the sequence number, if device_bind() doesn't. We want control
+	 * of this so that numbers are allocated as devices are probed. That
+	 * ensures that sub-bus numbered is correct (sub-buses must get numbers
+	 * higher than their parents)
+	 */
+	if (dev_seq(bus) == -1) {
+		ret = uclass_get(UCLASS_PCI, &uc);
+		if (ret)
+			return ret;
+		bus->sqq = uclass_find_next_free_req_seq(uc);
+	}
+
 	/* For bridges, use the top-level PCI controller */
 	if (!device_is_on_pci_bus(bus)) {
 		hose->ctlr = bus;
@@ -1024,6 +1032,7 @@ static int pci_uclass_pre_probe(struct udevice *bus)
 		parent_hose = dev_get_uclass_priv(bus->parent);
 		hose->ctlr = parent_hose->bus;
 	}
+
 	hose->bus = bus;
 	hose->first_busno = dev_seq(bus);
 	hose->last_busno = dev_seq(bus);
@@ -1044,14 +1053,14 @@ static int pci_uclass_post_probe(struct udevice *bus)
 	debug("%s: probing bus %d\n", __func__, dev_seq(bus));
 	ret = pci_bind_bus_devices(bus);
 	if (ret)
-		return ret;
+		return log_msg_ret("bind", ret);
 
 	if (CONFIG_IS_ENABLED(PCI_PNP) && ll_boot_init() &&
 	    (!hose->skip_auto_config_until_reloc ||
 	     (gd->flags & GD_FLG_RELOC))) {
 		ret = pci_auto_config_devices(bus);
 		if (ret < 0)
-			return log_msg_ret("pci auto-config", ret);
+			return log_msg_ret("cfg", ret);
 	}
 
 #if defined(CONFIG_X86) && defined(CONFIG_HAVE_FSP)
@@ -1071,7 +1080,7 @@ static int pci_uclass_post_probe(struct udevice *bus)
 	if ((gd->flags & GD_FLG_RELOC) && dev_seq(bus) == 0 && ll_boot_init()) {
 		ret = fsp_init_phase_pci();
 		if (ret)
-			return ret;
+			return log_msg_ret("fsp", ret);
 	}
 #endif
 
@@ -1791,7 +1800,7 @@ int pci_sriov_get_totalvfs(struct udevice *pdev)
 UCLASS_DRIVER(pci) = {
 	.id		= UCLASS_PCI,
 	.name		= "pci",
-	.flags		= DM_UC_FLAG_SEQ_ALIAS,
+	.flags		= DM_UC_FLAG_SEQ_ALIAS | DM_UC_FLAG_NO_AUTO_SEQ,
 	.post_bind	= dm_scan_fdt_dev,
 	.pre_probe	= pci_uclass_pre_probe,
 	.post_probe	= pci_uclass_post_probe,