clk: Add K210 clock support

Due to the large number of clocks, I decided to use the CCF. The overall
structure is modeled after the imx code. Clocks parameters are stored in
several arrays, and are then instantiated at run-time. There are some
translation macros (FOOIFY()) which allow for more dense packing.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
CC: Lukasz Majewski <lukma@denx.de>

1 files changed, 33 insertions, 0 deletions

diff --git a/doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt b/doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt
new file mode 100644
index 0000000..5b24abc
--- /dev/null
+++ b/doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt
@@ -0,0 +1,33 @@
+Kendryte K210 Sysctl
+
+This binding describes the K210 sysctl device, which contains many miscellaneous
+registers controlling system functionality. This node is a register map and can
+be reference by other bindings which need a phandle to the K210 sysctl regmap.
+
+Required properties:
+- compatible: should be
+	"kendryte,k210-sysctl", "syscon", "simple-mfd"
+- reg: address and length of the sysctl registers
+- reg-io-width: must be <4>
+
+Clock sub-node
+
+This node is a binding for the clock tree driver
+
+Required properties:
+- compatible: should be "kendryte,k210-clk"
+- clocks: phandle to the "in0" external oscillator
+- #clock-cells: must be <1>
+
+Example:
+sysctl: syscon@50440000 {
+	compatible = "kendryte,k210-sysctl", "syscon", "simple-mfd";
+	reg = <0x50440000 0x100>;
+	reg-io-width = <4>;
+
+	sysclk: clock-controller {
+		compatible = "kendryte,k210-clk";
+		clocks = <&in0>;
+		#clock-cells = <1>;
+	};
+};