diff options
| author | Patrick Delaunay <patrick.delaunay@foss.st.com> | 2022-07-05 16:55:57 +0200 |
|---|---|---|
| committer | Patrick Delaunay <patrick.delaunay@foss.st.com> | 2022-07-12 11:46:32 +0200 |
| commit | 6cccc8d396bfd68bbf695b3b3c92e60b8bdf8b77 (patch) | |
| tree | 3dfc2a4180baa51002837ffe639f587c61ec7921 /doc | |
| parent | 7f4de655c0ff460c1a4ee6ea00208327ab54e22d (diff) | |
| download | u-boot-6cccc8d396bfd68bbf695b3b3c92e60b8bdf8b77.zip u-boot-6cccc8d396bfd68bbf695b3b3c92e60b8bdf8b77.tar.gz u-boot-6cccc8d396bfd68bbf695b3b3c92e60b8bdf8b77.tar.bz2 | |
ARM: dts: stm32: add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
Add a "secure" version of STM32 boards based on SCMI when RCC_TZCR.TZEN=1.
Only boards provided by STMicroelectronics are concerned:
-STM32MP157A-DK1
-STM32MP157C-DK2
-STM32MP157C-ED1
-STM32MP157C-EV1
The resources secured by RCC_TZCR.TZEN=1 are managed by OP-TEE
and the associated SCMI services, reset and clock.
These device trees are only supported with stm32mp15_defconfig,
with OP-TEE, SCMI and without SPL support.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/board/st/stm32mp1.rst | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst index 00f9b45..3759df3 100644 --- a/doc/board/st/stm32mp1.rst +++ b/doc/board/st/stm32mp1.rst @@ -77,6 +77,16 @@ Currently the following boards are supported: + stm32mp157c-ev1.dts + stm32mp15xx-dhcor-avenger96.dts +The SCMI variant of each board is supported by a specific "scmi" device tree: + + stm32mp157a-dk1-scmi.dts + + stm32mp157c-dk2-scmi.dts + + stm32mp157c-ed1-scmi.dts + + stm32mp157c-ev1-scmi.dts + +SCMI variant is used only with stm32mp15_defconfig, when the resources are +secured with RCC_TZCR.TZEN=1 in OP-TEE. The access to these reset and clock +resources are provided by OP-TEE and the associated SCMI services. + STM32MP13x `````````` @@ -136,6 +146,9 @@ TF-A_ (BL2) initialize the DDR and loads the next stage binaries from a FIP file the secure monitor to access to secure resources. + HW_CONFIG: The hardware configuration file = the U-Boot device tree +The scmi variant of each device tree is only support with OP-TEE as secure +monitor, with stm32mp15_defconfig. + The **Basic** boot chain with SPL (for STM32MP15x) `````````````````````````````````````````````````` @@ -250,6 +263,12 @@ Build Procedure # export KBUILD_OUTPUT=stm32mp15 # make stm32mp15_defconfig + # make DEVICE_TREE=stm32mp157c-ev1-scmi all + + or without SCMI support + + # export KBUILD_OUTPUT=stm32mp15 + # make stm32mp15_defconfig # make DEVICE_TREE=stm32mp157c-ev1 all b) trusted boot on STM32MP13x discovery board:: |