Merge tag 'u-boot-imx-20220422' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220422
-------------------

- Switch to DM_SERIAL
- Drop MMCROOT
- several cleanup

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11815

3 files changed, 0 insertions, 79 deletions

diff --git a/doc/board/nxp/imx8mn_evk.rst b/doc/board/nxp/imx8mn_evk.rst
index 711545a..c45bb7b 100644
--- a/doc/board/nxp/imx8mn_evk.rst
+++ b/doc/board/nxp/imx8mn_evk.rst
@@ -42,7 +42,6 @@ Build U-Boot
 
    $ export CROSS_COMPILE=aarch64-poky-linux-
    $ make imx8mn_ddr4_evk_defconfig
-   $ export ATF_LOAD_ADDR=0x960000
    $ make
 
 Burn the flash.bin to MicroSD card offset 32KB:
diff --git a/doc/board/toradex/apalis-imx8x.rst b/doc/board/toradex/apalis-imx8x.rst
deleted file mode 100644
index e62578b..0000000
--- a/doc/board/toradex/apalis-imx8x.rst
+++ /dev/null
@@ -1,77 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-
-Apalis iMX8X V1.1A Module (SoC NXP i.MX8QXP RevB)
-=================================================
-
-Quick Start
------------
-
-- Get and Build the ARM trusted firmware
-- Get System Controller firmware
-- Get SECO container
-- Build U-Boot
-- Load U-Boot binary using uuu
-- Flash U-Boot binary into the eMMC
-- Boot
-
-Note: builddir is U-Boot build directory (source directory for in-tree builds)
-
-Get and Build the ARM Trusted Firmware
---------------------------------------
-
-.. code-block:: bash
-
-    $ cd $(builddir)
-    $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git
-    $ make PLAT=imx8qx bl31 -C imx-atf
-    $ cp imx-atf/build/imx8qx/release/bl31.bin $(builddir)
-
-Get System Controller firmware
----------------------------------------
-
-.. code-block:: bash
-
-    $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin
-
-Get SECO container
----------------------------------------
-
-.. code-block:: bash
-
-    $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin
-    $ sh imx-seco-3.7.4.bin
-    $ cp imx-seco-3.7.4/firmware/seco/mx8qxb0-ahab-container.img $(builddir)/mx8qx-ahab-container.img
-
-Build U-Boot
-------------
-.. code-block:: bash
-
-    $ make apalis-imx8x_defconfig
-    $ make u-boot-dtb.imx
-
-Load the U-Boot Binary Using UUU
---------------------------------
-
-Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
-
-https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
-
-Put the module into USB recovery aka serial downloader mode, connect USB device
-to your host and execute uuu:
-
-.. code-block:: bash
-
-    sudo ./uuu $(builddir)/u-boot-dtb.imx
-
-Flash the U-Boot Binary into the eMMC
--------------------------------------
-
-Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area
-partition and boot:
-
-.. code-block:: bash
-
-    load mmc 1:1 $loadaddr u-boot-dtb.imx
-    setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
-    mmc dev 0 1
-    mmc write ${loadaddr} 0x0 ${blkcnt}
diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
index 1cd926a..ead5efb 100644
--- a/doc/board/toradex/index.rst
+++ b/doc/board/toradex/index.rst
@@ -7,7 +7,6 @@ Toradex
    :maxdepth: 2
 
    apalis-imx8
-   apalis-imx8x
    colibri_imx7
    colibri-imx8x
    verdin-imx8mm