miiphybb: move to drivers/net/phy

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 0 insertions, 236 deletions

diff --git a/common/Makefile b/common/Makefile
index 3e4829f..ff2e6c6 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -133,7 +133,6 @@ COBJS-$(CONFIG_LCD) += lcd.o
 COBJS-y += lists.o
 COBJS-$(CONFIG_LYNXKDI) += lynxkdi.o
 COBJS-y += memsize.o
-COBJS-$(CONFIG_BITBANGMII) += miiphybb.o
 COBJS-y += miiphyutil.o
 COBJS-y += s_record.o
 COBJS-y += serial.o
diff --git a/common/miiphybb.c b/common/miiphybb.c
deleted file mode 100644
index 6446012..0000000
--- a/common/miiphybb.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * (C) Copyright 2001
- * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This provides a bit-banged interface to the ethernet MII management
- * channel.
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <ppc_asm.tmpl>
-
-/*****************************************************************************
- *
- * Utility to send the preamble, address, and register (common to read
- * and write).
- */
-static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
-{
-	int j;			/* counter */
-#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
-#endif
-
-	/*
-	 * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
-	 * The IEEE spec says this is a PHY optional requirement.  The AMD
-	 * 79C874 requires one after power up and one after a MII communications
-	 * error.  This means that we are doing more preambles than we need,
-	 * but it is safer and will be much more robust.
-	 */
-
-	MDIO_ACTIVE;
-	MDIO (1);
-	for (j = 0; j < 32; j++) {
-		MDC (0);
-		MIIDELAY;
-		MDC (1);
-		MIIDELAY;
-	}
-
-	/* send the start bit (01) and the read opcode (10) or write (10) */
-	MDC (0);
-	MDIO (0);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-	MDC (0);
-	MDIO (1);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-	MDC (0);
-	MDIO (read);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-	MDC (0);
-	MDIO (!read);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-
-	/* send the PHY address */
-	for (j = 0; j < 5; j++) {
-		MDC (0);
-		if ((addr & 0x10) == 0) {
-			MDIO (0);
-		} else {
-			MDIO (1);
-		}
-		MIIDELAY;
-		MDC (1);
-		MIIDELAY;
-		addr <<= 1;
-	}
-
-	/* send the register address */
-	for (j = 0; j < 5; j++) {
-		MDC (0);
-		if ((reg & 0x10) == 0) {
-			MDIO (0);
-		} else {
-			MDIO (1);
-		}
-		MIIDELAY;
-		MDC (1);
-		MIIDELAY;
-		reg <<= 1;
-	}
-}
-
-
-/*****************************************************************************
- *
- * Read a MII PHY register.
- *
- * Returns:
- *   0 on success
- */
-int bb_miiphy_read (char *devname, unsigned char addr,
-		unsigned char reg, unsigned short *value)
-{
-	short rdreg;		/* register working value */
-	int j;			/* counter */
-#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
-#endif
-
-	miiphy_pre (1, addr, reg);
-
-	/* tri-state our MDIO I/O pin so we can read */
-	MDC (0);
-	MDIO_TRISTATE;
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-
-	/* check the turnaround bit: the PHY should be driving it to zero */
-	if (MDIO_READ != 0) {
-		/* puts ("PHY didn't drive TA low\n"); */
-		for (j = 0; j < 32; j++) {
-			MDC (0);
-			MIIDELAY;
-			MDC (1);
-			MIIDELAY;
-		}
-		return (-1);
-	}
-
-	MDC (0);
-	MIIDELAY;
-
-	/* read 16 bits of register data, MSB first */
-	rdreg = 0;
-	for (j = 0; j < 16; j++) {
-		MDC (1);
-		MIIDELAY;
-		rdreg <<= 1;
-		rdreg |= MDIO_READ;
-		MDC (0);
-		MIIDELAY;
-	}
-
-	MDC (1);
-	MIIDELAY;
-	MDC (0);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-
-	*value = rdreg;
-
-#ifdef DEBUG
-	printf ("miiphy_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, *value);
-#endif
-
-	return 0;
-}
-
-
-/*****************************************************************************
- *
- * Write a MII PHY register.
- *
- * Returns:
- *   0 on success
- */
-int bb_miiphy_write (char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value)
-{
-	int j;			/* counter */
-#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
-#endif
-
-	miiphy_pre (0, addr, reg);
-
-	/* send the turnaround (10) */
-	MDC (0);
-	MDIO (1);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-	MDC (0);
-	MDIO (0);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-
-	/* write 16 bits of register data, MSB first */
-	for (j = 0; j < 16; j++) {
-		MDC (0);
-		if ((value & 0x00008000) == 0) {
-			MDIO (0);
-		} else {
-			MDIO (1);
-		}
-		MIIDELAY;
-		MDC (1);
-		MIIDELAY;
-		value <<= 1;
-	}
-
-	/*
-	 * Tri-state the MDIO line.
-	 */
-	MDIO_TRISTATE;
-	MDC (0);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-
-	return 0;
-}