Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv

- Support SPL and OpenSBI (FW_DYNAMIC firmware) boot.
- Fix qemu kconfig build warning.

6 files changed, 135 insertions, 14 deletions

diff --git a/common/image.c b/common/image.c
index 84e859a..645584b 100644
--- a/common/image.c
+++ b/common/image.c
@@ -132,6 +132,7 @@ static const table_entry_t uimage_os[] = {
 #if defined(CONFIG_BOOTM_OPENRTOS) || defined(USE_HOSTCC)
 	{	IH_OS_OPENRTOS,	"openrtos",	"OpenRTOS",		},
 #endif
+	{	IH_OS_OPENSBI,	"opensbi",	"RISC-V OpenSBI",	},
 
 	{	-1,		"",		"",			},
 };
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 94dcdff..bb56e3f 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1156,6 +1156,23 @@ config SPL_OPTEE
 	  OP-TEE is an open source Trusted OS  which is loaded by SPL.
 	  More detail at: https://github.com/OP-TEE/optee_os
 
+config SPL_OPENSBI
+	bool "Support RISC-V OpenSBI"
+	depends on RISCV && SPL_RISCV_MMODE && RISCV_SMODE
+	help
+	  OpenSBI is an open-source implementation of the RISC-V Supervisor Binary
+	  Interface (SBI) specification. U-Boot supports the OpenSBI FW_DYNAMIC
+	  firmware. It is loaded and started by U-Boot SPL.
+
+	  More details are available at https://github.com/riscv/opensbi and
+	  https://github.com/riscv/riscv-sbi-doc
+
+config SPL_OPENSBI_LOAD_ADDR
+	hex "OpenSBI load address"
+	depends on SPL_OPENSBI
+	help
+	  Load address of the OpenSBI binary.
+
 config TPL
 	bool
 	depends on SUPPORT_TPL
diff --git a/common/spl/Makefile b/common/spl/Makefile
index d28de69..5ce6f4a 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o
 obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
 obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o
+obj-$(CONFIG_$(SPL_TPL_)OPENSBI) += spl_opensbi.o
 obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
 obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o
 obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 2c696f2..082fa2b 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -659,6 +659,12 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 				(void *)spl_image.entry_point);
 		break;
 #endif
+#if CONFIG_IS_ENABLED(OPENSBI)
+	case IH_OS_OPENSBI:
+		debug("Jumping to U-Boot via RISC-V OpenSBI\n");
+		spl_invoke_opensbi(&spl_image);
+		break;
+#endif
 #ifdef CONFIG_SPL_OS_BOOT
 	case IH_OS_LINUX:
 		debug("Jumping to Linux\n");
@@ -775,7 +781,7 @@ ulong spl_relocate_stack_gd(void)
 #if CONFIG_IS_ENABLED(DM)
 	dm_fixup_for_gd_move(new_gd);
 #endif
-#if !defined(CONFIG_ARM)
+#if !defined(CONFIG_ARM) && !defined(CONFIG_RISCV)
 	gd = new_gd;
 #endif
 	return ptr;
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index 2e2e09e..b3e3ccd 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -12,6 +12,8 @@
 #include <linux/libfdt.h>
 #include <spl.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CONFIG_SYS_BOOTM_LEN
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)
 #endif
@@ -279,25 +281,34 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image,
 			      void *fit, int images, ulong base_offset)
 {
 	struct spl_image_info image_info;
-	int node, ret;
+	int node, ret = 0;
+
+	/*
+	 * Use the address following the image as target address for the
+	 * device tree.
+	 */
+	image_info.load_addr = spl_image->load_addr + spl_image->size;
 
 	/* Figure out which device tree the board wants to use */
 	node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
 	if (node < 0) {
 		debug("%s: cannot find FDT node\n", __func__);
-		return node;
-	}
-
-	/*
-	 * Read the device tree and place it after the image.
-	 * Align the destination address to ARCH_DMA_MINALIGN.
-	 */
-	image_info.load_addr = spl_image->load_addr + spl_image->size;
-	ret = spl_load_fit_image(info, sector, fit, base_offset, node,
-				 &image_info);
 
-	if (ret < 0)
-		return ret;
+		/*
+		 * U-Boot did not find a device tree inside the FIT image. Use
+		 * the U-Boot device tree instead.
+		 */
+		if (gd->fdt_blob)
+			memcpy((void *)image_info.load_addr, gd->fdt_blob,
+			       fdt_totalsize(gd->fdt_blob));
+		else
+			return node;
+	} else {
+		ret = spl_load_fit_image(info, sector, fit, base_offset, node,
+					 &image_info);
+		if (ret < 0)
+			return ret;
+	}
 
 	/* Make the load-address of the FDT available for the SPL framework */
 	spl_image->fdt_addr = (void *)image_info.load_addr;
diff --git a/common/spl/spl_opensbi.c b/common/spl/spl_opensbi.c
new file mode 100644
index 0000000..a6b4480
--- /dev/null
+++ b/common/spl/spl_opensbi.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Fraunhofer AISEC,
+ * Lukas Auer <lukas.auer@aisec.fraunhofer.de>
+ *
+ * Based on common/spl/spl_atf.c
+ */
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/smp.h>
+#include <opensbi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct fw_dynamic_info opensbi_info;
+
+static int spl_opensbi_find_uboot_node(void *blob, int *uboot_node)
+{
+	int fit_images_node, node;
+	const char *fit_os;
+
+	fit_images_node = fdt_path_offset(blob, "/fit-images");
+	if (fit_images_node < 0)
+		return -ENODEV;
+
+	fdt_for_each_subnode(node, blob, fit_images_node) {
+		fit_os = fdt_getprop(blob, node, FIT_OS_PROP, NULL);
+		if (!fit_os)
+			continue;
+
+		if (genimg_get_os_id(fit_os) == IH_OS_U_BOOT) {
+			*uboot_node = node;
+			return 0;
+		}
+	}
+
+	return -ENODEV;
+}
+
+void spl_invoke_opensbi(struct spl_image_info *spl_image)
+{
+	int ret, uboot_node;
+	ulong uboot_entry;
+	void (*opensbi_entry)(ulong hartid, ulong dtb, ulong info);
+
+	if (!spl_image->fdt_addr) {
+		pr_err("No device tree specified in SPL image\n");
+		hang();
+	}
+
+	/* Find U-Boot image in /fit-images */
+	ret = spl_opensbi_find_uboot_node(spl_image->fdt_addr, &uboot_node);
+	if (ret) {
+		pr_err("Can't find U-Boot node, %d", ret);
+		hang();
+	}
+
+	/* Get U-Boot entry point */
+	uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node,
+				      "entry-point");
+	if (uboot_entry == FDT_ERROR)
+		uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node,
+					      "load-addr");
+
+	/* Prepare obensbi_info object */
+	opensbi_info.magic = FW_DYNAMIC_INFO_MAGIC_VALUE;
+	opensbi_info.version = FW_DYNAMIC_INFO_VERSION;
+	opensbi_info.next_addr = uboot_entry;
+	opensbi_info.next_mode = FW_DYNAMIC_INFO_NEXT_MODE_S;
+	opensbi_info.options = SBI_SCRATCH_NO_BOOT_PRINTS;
+
+	opensbi_entry = (void (*)(ulong, ulong, ulong))spl_image->entry_point;
+	invalidate_icache_all();
+
+#ifdef CONFIG_SMP
+	ret = smp_call_function((ulong)spl_image->entry_point,
+				(ulong)spl_image->fdt_addr,
+				(ulong)&opensbi_info);
+	if (ret)
+		hang();
+#endif
+	opensbi_entry(gd->arch.boot_hart, (ulong)spl_image->fdt_addr,
+		      (ulong)&opensbi_info);
+}