Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to Kconfig

- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR
  based on current usage.
- Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
  CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE
  CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
  to Kconfig.  We move these symbols around a bit and add appropriate
  dependencies to them.  In some cases, we now add a correct default value
  as well.

Signed-off-by: Tom Rini <trini@konsulko.com>

3 files changed, 44 insertions, 26 deletions

diff --git a/cmd/Kconfig b/cmd/Kconfig
index ffef3cc..41aba38 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -614,6 +614,37 @@ config EEPROM_LAYOUT_HELP_STRING
 	    Help printed with the LAYOUT VERSIONS part of the 'eeprom'
 	    command's help.
 
+config SYS_I2C_EEPROM_BUS
+	int "I2C bus of the EEPROM device."
+	depends on CMD_EEPROM
+	default 0
+
+config SYS_I2C_EEPROM_ADDR_LEN
+	int "Length in bytes of the EEPROM memory array address"
+	depends on CMD_EEPROM || ID_EEPROM
+	default 1
+	range 1 2
+	help
+	  Note: This is NOT the chip address length!
+
+config SYS_EEPROM_SIZE
+	depends on CMD_EEPROM
+	int "Size in bytes of the EEPROM device"
+	default 256
+
+config SYS_EEPROM_PAGE_WRITE_BITS
+	int "Number of bits used to address bytes in a single page"
+	depends on CMD_EEPROM
+	default 8
+	help
+	  The EEPROM page size is 2^SYS_EEPROM_PAGE_WRITE_BITS.
+	  A 64 byte page, for example would require six bits.
+
+config SYS_EEPROM_PAGE_WRITE_DELAY_MS
+	int "Number of milliseconds to delay between page writes"
+	depends on CMD_EEPROM || CMD_I2C
+	default 0
+
 config LOOPW
 	bool "loopw"
 	help
diff --git a/cmd/eeprom.c b/cmd/eeprom.c
index 447bc15..7e1a514 100644
--- a/cmd/eeprom.c
+++ b/cmd/eeprom.c
@@ -15,7 +15,7 @@
  * degradation (typical for EEPROM) is incured for FRAM memory:
  *
  * #define CONFIG_SYS_I2C_FRAM
- * #undef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
+ * Set CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to 0
  *
  */
 
@@ -31,14 +31,6 @@
 #define	CONFIG_SYS_I2C_SPEED	50000
 #endif
 
-#ifndef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	0
-#endif
-
-#ifndef CONFIG_SYS_EEPROM_PAGE_WRITE_BITS
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	8
-#endif
-
 #ifndef	I2C_RXTX_LEN
 #define I2C_RXTX_LEN	128
 #endif
@@ -46,20 +38,6 @@
 #define	EEPROM_PAGE_SIZE	(1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)
 #define	EEPROM_PAGE_OFFSET(x)	((x) & (EEPROM_PAGE_SIZE - 1))
 
-/*
- * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
- *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
- *
- * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
- *   0x00000nxx for EEPROM address selectors and page number at n.
- */
-#if !defined(CONFIG_SPI) && \
-	(!defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || \
-		(CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \
-		(CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2))
-#error CONFIG_SYS_I2C_EEPROM_ADDR_LEN must be 1 or 2
-#endif
-
 #if CONFIG_IS_ENABLED(DM_I2C)
 static int eeprom_i2c_bus;
 #endif
@@ -81,6 +59,13 @@ void eeprom_init(int bus)
 #endif
 }
 
+/*
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
+ *
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ *   0x00000nxx for EEPROM address selectors and page number at n.
+ */
 static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr)
 {
 	unsigned blk_off;
@@ -182,8 +167,10 @@ static int eeprom_rw(unsigned dev_addr, unsigned offset, uchar *buffer,
 		buffer += len;
 		offset += len;
 
+#if CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS > 0
 		if (!read)
 			udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
 	}
 
 	return rcode;
@@ -242,10 +229,10 @@ static int parse_i2c_bus_addr(int *i2c_bus, ulong *i2c_addr, int argc,
 	int argc_no_bus = argc_no_bus_addr + 1;
 	int argc_bus_addr = argc_no_bus_addr + 2;
 
-#ifdef CONFIG_SYS_DEF_EEPROM_ADDR
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
 	if (argc == argc_no_bus_addr) {
 		*i2c_bus = -1;
-		*i2c_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
+		*i2c_addr = CONFIG_SYS_I2C_EEPROM_ADDR;
 
 		return 0;
 	}
diff --git a/cmd/i2c.c b/cmd/i2c.c
index c7c08c4..cbc8bd0 100644
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@@ -922,7 +922,7 @@ static int mod_i2c_mem(struct cmd_tbl *cmdtp, int incrflag, int flag, int argc,
 				if (ret)
 					return i2c_report_err(ret,
 							      I2C_ERR_WRITE);
-#ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
+#if CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS > 0
 				udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 				if (incrflag)