diff options
author | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2014-06-20 13:54:57 +0900 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-07-07 19:43:02 -0400 |
commit | 98ad54beb5baf9cb66c6440a2ca132bd1032d2e3 (patch) | |
tree | a667053718c5ee0237f064def812ff382cdaee80 /board | |
parent | b8c1438a7aba4da91ef6a7b94c13148087656989 (diff) | |
download | u-boot-98ad54beb5baf9cb66c6440a2ca132bd1032d2e3.zip u-boot-98ad54beb5baf9cb66c6440a2ca132bd1032d2e3.tar.gz u-boot-98ad54beb5baf9cb66c6440a2ca132bd1032d2e3.tar.bz2 |
mpc8xx: remove spc1920 board support
This board is old enough and has no maintainer.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Diffstat (limited to 'board')
-rw-r--r-- | board/spc1920/Makefile | 8 | ||||
-rw-r--r-- | board/spc1920/hpi.c | 596 | ||||
-rw-r--r-- | board/spc1920/hpi.h | 12 | ||||
-rw-r--r-- | board/spc1920/pld.h | 14 | ||||
-rw-r--r-- | board/spc1920/spc1920.c | 248 | ||||
-rw-r--r-- | board/spc1920/u-boot.lds | 82 |
6 files changed, 0 insertions, 960 deletions
diff --git a/board/spc1920/Makefile b/board/spc1920/Makefile deleted file mode 100644 index c0c9a32..0000000 --- a/board/spc1920/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = spc1920.o hpi.o diff --git a/board/spc1920/hpi.c b/board/spc1920/hpi.c deleted file mode 100644 index c593837..0000000 --- a/board/spc1920/hpi.c +++ /dev/null @@ -1,596 +0,0 @@ -/* - * (C) Copyright 2006 - * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Host Port Interface (HPI) - */ - -/* debug levels: - * 0 : errors - * 1 : usefull info - * 2 : lots of info - * 3 : noisy - */ - -#define DEBUG 0 - -#include <config.h> -#include <common.h> -#include <mpc8xx.h> - -#include "pld.h" -#include "hpi.h" - -#define _NOT_USED_ 0xFFFFFFFF - -/* original table: - * - inserted loops to achieve long CS low and high Periods (~217ns) - * - move cs high 2/4 to the right - */ -const uint dsp_table_slow[] = -{ - /* single read (offset 0x00 in upm ram) */ - 0x8fffdc04, 0x0fffdc84, 0x0fffdc84, 0x0fffdc00, - 0x3fffdc04, 0xffffdc84, 0xffffdc84, 0xffffdc05, - - /* burst read (offset 0x08 in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* single write (offset 0x18 in upm ram) */ - 0x8fffd004, 0x0fffd084, 0x0fffd084, 0x3fffd000, - 0xffffd084, 0xffffd084, 0xffffd005, _NOT_USED_, - - /* burst write (offset 0x20 in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* refresh (offset 0x30 in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* exception (offset 0x3C in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - -/* dsp hpi upm ram table - * works fine for noninc access, failes on incremental. - * - removed first word - */ -const uint dsp_table_fast[] = -{ - /* single read (offset 0x00 in upm ram) */ - 0x8fffdc04, 0x0fffdc04, 0x0fffdc00, 0x3fffdc04, - 0xffffdc05, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* burst read (offset 0x08 in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* single write (offset 0x18 in upm ram) */ - 0x8fffd004, 0x0fffd004, 0x3fffd000, 0xffffd005, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* burst write (offset 0x20 in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* refresh (offset 0x30 in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* exception (offset 0x3C in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - - -#ifdef CONFIG_SPC1920_HPI_TEST -#undef HPI_TEST_OSZI - -#define HPI_TEST_CHUNKSIZE 0x1000 -#define HPI_TEST_PATTERN 0x00000000 -#define HPI_TEST_START 0x0 -#define HPI_TEST_END 0x30000 - -#define TINY_AUTOINC_DATA_SIZE 16 /* 32bit words */ -#define TINY_AUTOINC_BASE_ADDR 0x0 - -static int hpi_activate(void); -#if 0 -static void hpi_inactivate(void); -#endif -static void dsp_reset(void); - -static int hpi_write_inc(u32 addr, u32 *data, u32 count); -static int hpi_read_inc(u32 addr, u32 *buf, u32 count); -static int hpi_write_noinc(u32 addr, u32 data); -static u32 hpi_read_noinc(u32 addr); - -int hpi_test(void); -static int hpi_write_addr_test(u32 addr); -static int hpi_read_write_test(u32 addr, u32 data); -#ifdef DO_TINY_TEST -static int hpi_tiny_autoinc_test(void); -#endif /* DO_TINY_TEST */ -#endif /* CONFIG_SPC1920_HPI_TEST */ - - -/* init the host port interface on UPMA */ -int hpi_init(void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immr->im_memctl; - volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE; - - upmconfig(UPMA, (uint *)dsp_table_slow, sizeof(dsp_table_slow)/sizeof(uint)); - udelay(100); - - memctl->memc_mamr = CONFIG_SYS_MAMR; - memctl->memc_or3 = CONFIG_SYS_OR3; - memctl->memc_br3 = CONFIG_SYS_BR3; - - /* reset dsp */ - dsp_reset(); - - /* activate hpi switch*/ - pld->dsp_hpi_on = 0x1; - - udelay(100); - - return 0; -} - -#ifdef CONFIG_SPC1920_HPI_TEST -/* activate the Host Port interface */ -static int hpi_activate(void) -{ - volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE; - - /* turn on hpi */ - pld->dsp_hpi_on = 0x1; - - udelay(5); - - /* turn on the power EN_DSP_POWER high*/ - /* currently always on TBD */ - - /* setup hpi control register */ - HPI_HPIC_1 = (u16) 0x0008; - HPI_HPIC_2 = (u16) 0x0008; - - udelay(100); - - return 0; -} - -#if 0 -/* turn off the host port interface */ -static void hpi_inactivate(void) -{ - volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE; - - /* deactivate hpi */ - pld->dsp_hpi_on = 0x0; - - /* reset the dsp */ - /* pld->dsp_reset = 0x0; */ - - /* turn off the power EN_DSP_POWER# high*/ - /* currently always on TBD */ - -} -#endif - -/* reset the DSP */ -static void dsp_reset(void) -{ - volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE; - pld->dsp_reset = 0x1; - pld->dsp_hpi_on = 0x0; - - udelay(300000); - - pld->dsp_reset = 0x0; - pld->dsp_hpi_on = 0x1; -} - - -/* write using autoinc (count is number of 32bit words) */ -static int hpi_write_inc(u32 addr, u32 *data, u32 count) -{ - int i; - u16 addr1, addr2; - - addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ - addr2 = (u16) (addr & 0xffff); - - /* write address */ - HPI_HPIA_1 = addr1; - HPI_HPIA_2 = addr2; - - debug("writing from data=0x%lx to 0x%lx\n", - (ulong)data, (ulong)(data+count)); - - for(i=0; i<count; i++) { - HPI_HPID_INC_1 = (u16) ((data[i] >> 16) & 0xffff); - HPI_HPID_INC_2 = (u16) (data[i] & 0xffff); - debug("hpi_write_inc: data1=0x%x, data2=0x%x\n", - (u16) ((data[i] >> 16) & 0xffff), - (u16) (data[i] & 0xffff)); - } -#if 0 - while(data_ptr < (u16*) (data + count)) { - HPI_HPID_INC_1 = *(data_ptr++); - HPI_HPID_INC_2 = *(data_ptr++); - } -#endif - - /* return number of bytes written */ - return count; -} - -/* - * read using autoinc (count is number of 32bit words) - */ -static int hpi_read_inc(u32 addr, u32 *buf, u32 count) -{ - int i; - u16 addr1, addr2, data1, data2; - - addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ - addr2 = (u16) (addr & 0xffff); - - /* write address */ - HPI_HPIA_1 = addr1; - HPI_HPIA_2 = addr2; - - for(i=0; i<count; i++) { - data1 = HPI_HPID_INC_1; - data2 = HPI_HPID_INC_2; - debug("hpi_read_inc: data1=0x%x, data2=0x%x\n", data1, data2); - buf[i] = (((u32) data1) << 16) | (data2 & 0xffff); - } - -#if 0 - while(buf_ptr < (u16*) (buf + count)) { - *(buf_ptr++) = HPI_HPID_INC_1; - *(buf_ptr++) = HPI_HPID_INC_2; - } -#endif - - /* return number of bytes read */ - return count; -} - - -/* write to non- auto inc regs */ -static int hpi_write_noinc(u32 addr, u32 data) -{ - - u16 addr1, addr2, data1, data2; - - addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ - addr2 = (u16) (addr & 0xffff); - - /* printf("hpi_write_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */ - - HPI_HPIA_1 = addr1; - HPI_HPIA_2 = addr2; - - data1 = (u16) ((data >> 16) & 0xffff); - data2 = (u16) (data & 0xffff); - - /* printf("hpi_write_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */ - - HPI_HPID_NOINC_1 = data1; - HPI_HPID_NOINC_2 = data2; - - return 0; -} - -/* read from non- auto inc regs */ -static u32 hpi_read_noinc(u32 addr) -{ - u16 addr1, addr2, data1, data2; - u32 ret; - - addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ - addr2 = (u16) (addr & 0xffff); - - HPI_HPIA_1 = addr1; - HPI_HPIA_2 = addr2; - - /* printf("hpi_read_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */ - - data1 = HPI_HPID_NOINC_1; - data2 = HPI_HPID_NOINC_2; - - /* printf("hpi_read_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */ - - ret = (((u32) data1) << 16) | (data2 & 0xffff); - return ret; - -} - -/* - * Host Port Interface Tests - */ - -#ifndef HPI_TEST_OSZI -/* main test function */ -int hpi_test(void) -{ - int err = 0; - u32 i, ii, pattern, tmp; - - pattern = HPI_TEST_PATTERN; - - u32 test_data[HPI_TEST_CHUNKSIZE]; - u32 read_data[HPI_TEST_CHUNKSIZE]; - - debug("hpi_test: activating hpi..."); - hpi_activate(); - debug("OK.\n"); - -#if 0 - /* Dump the first 1024 bytes - * - */ - for(i=0; i<1024; i+=4) { - if(i%16==0) - printf("\n0x%08x: ", i); - printf("0x%08x ", hpi_read_noinc(i)); - } -#endif - - /* HPIA read-write test - * - */ - debug("hpi_test: starting HPIA read-write tests...\n"); - err |= hpi_write_addr_test(0xdeadc0de); - err |= hpi_write_addr_test(0xbeefd00d); - err |= hpi_write_addr_test(0xabcd1234); - err |= hpi_write_addr_test(0xaaaaaaaa); - if(err) { - debug("hpi_test: HPIA read-write tests: *** FAILED ***\n"); - return -1; - } - debug("hpi_test: HPIA read-write tests: OK\n"); - - - /* read write test using nonincremental data regs - * - */ - debug("hpi_test: starting nonincremental tests...\n"); - for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) { - err |= hpi_read_write_test(i, pattern); - - /* stolen from cmd_mem.c */ - if(pattern & 0x80000000) { - pattern = -pattern; /* complement & increment */ - } else { - pattern = ~pattern; - } - err |= hpi_read_write_test(i, pattern); - - if(err) { - debug("hpi_test: nonincremental tests *** FAILED ***\n"); - return -1; - } - } - debug("hpi_test: nonincremental test OK\n"); - - /* read write a chunk of data using nonincremental data regs - * - */ - debug("hpi_test: starting nonincremental chunk tests...\n"); - pattern = HPI_TEST_PATTERN; - for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) { - hpi_write_noinc(i, pattern); - - /* stolen from cmd_mem.c */ - if(pattern & 0x80000000) { - pattern = -pattern; /* complement & increment */ - } else { - pattern = ~pattern; - } - } - pattern = HPI_TEST_PATTERN; - for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) { - tmp = hpi_read_noinc(i); - - if(tmp != pattern) { - debug("hpi_test: noninc chunk test *** FAILED *** @ 0x%x, written=0x%x, read=0x%x\n", i, pattern, tmp); - err = -1; - } - /* stolen from cmd_mem.c */ - if(pattern & 0x80000000) { - pattern = -pattern; /* complement & increment */ - } else { - pattern = ~pattern; - } - } - if(err) - return -1; - debug("hpi_test: nonincremental chunk test OK\n"); - - -#ifdef DO_TINY_TEST - /* small verbose test using autoinc and nonautoinc to compare - * - */ - debug("hpi_test: tiny_autoinc_test...\n"); - hpi_tiny_autoinc_test(); - debug("hpi_test: tiny_autoinc_test done\n"); -#endif /* DO_TINY_TEST */ - - - /* $%& write a chunk of data using the autoincremental regs - * - */ - debug("hpi_test: starting autoinc test %d chunks with 0x%x bytes...\n", - ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE), - HPI_TEST_CHUNKSIZE); - - for(i=HPI_TEST_START; - i < ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE); - i++) { - /* generate the pattern data */ - debug("generating pattern data: "); - for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) { - debug("0x%x ", pattern); - - test_data[ii] = pattern; - read_data[ii] = 0x0; /* zero to be sure */ - - /* stolen from cmd_mem.c */ - if(pattern & 0x80000000) { - pattern = -pattern; /* complement & increment */ - } else { - pattern = ~pattern; - } - } - debug("done\n"); - - debug("Writing autoinc data @ 0x%x\n", i); - hpi_write_inc(i, test_data, HPI_TEST_CHUNKSIZE); - - debug("Reading autoinc data @ 0x%x\n", i); - hpi_read_inc(i, read_data, HPI_TEST_CHUNKSIZE); - - /* compare */ - for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) { - debug("hpi_test_autoinc: @ 0x%x, written=0x%x, read=0x%x", i+ii, test_data[ii], read_data[ii]); - if(read_data[ii] != test_data[ii]) { - debug("hpi_test: autoinc test @ 0x%x, written=0x%x, read=0x%x *** FAILED ***\n", i+ii, test_data[ii], read_data[ii]); - return -1; - } - } - } - debug("hpi_test: autoinc test OK\n"); - - return 0; -} -#else /* HPI_TEST_OSZI */ -int hpi_test(void) -{ - int i; - u32 read_data[TINY_AUTOINC_DATA_SIZE]; - - unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = { - 0x11112222, 0x33334444, 0x55556666, 0x77778888, - 0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111, - 0x00010002, 0x00030004, 0x00050006, 0x00070008, - 0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001 - }; - - debug("hpi_test: activating hpi..."); - hpi_activate(); - debug("OK.\n"); - - while(1) { - led9(1); - debug(" writing to autoinc...\n"); - hpi_write_inc(TINY_AUTOINC_BASE_ADDR, - dummy_data, TINY_AUTOINC_DATA_SIZE); - - debug(" reading from autoinc...\n"); - hpi_read_inc(TINY_AUTOINC_BASE_ADDR, - read_data, TINY_AUTOINC_DATA_SIZE); - - for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) { - debug(" written=0x%x, read(inc)=0x%x\n", - dummy_data[i], read_data[i]); - } - led9(0); - udelay(2000000); - } - return 0; -} -#endif - -/* test if Host Port Address Register can be written correctly */ -static int hpi_write_addr_test(u32 addr) -{ - u32 read_back; - /* write address */ - HPI_HPIA_1 = ((u16) (addr >> 16)); /* First HW is most significant */ - HPI_HPIA_2 = ((u16) addr); - - read_back = (((u32) HPI_HPIA_1)<<16) | ((u32) HPI_HPIA_2); - - if(read_back == addr) { - debug(" hpi_write_addr_test OK: written=0x%x, read=0x%x\n", - addr, read_back); - return 0; - } else { - debug(" hpi_write_addr_test *** FAILED ***: written=0x%x, read=0x%x\n", - addr, read_back); - return -1; - } - - return 0; -} - -/* test if a simple read/write sequence succeeds */ -static int hpi_read_write_test(u32 addr, u32 data) -{ - u32 read_back; - - hpi_write_noinc(addr, data); - read_back = hpi_read_noinc(addr); - - if(read_back == data) { - debug(" hpi_read_write_test: OK, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back); - return 0; - } else { - debug(" hpi_read_write_test: *** FAILED ***, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back); - return -1; - } - - return 0; -} - -#ifdef DO_TINY_TEST -static int hpi_tiny_autoinc_test(void) -{ - int i; - u32 read_data[TINY_AUTOINC_DATA_SIZE]; - u32 read_data_noinc[TINY_AUTOINC_DATA_SIZE]; - - unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = { - 0x11112222, 0x33334444, 0x55556666, 0x77778888, - 0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111, - 0x00010002, 0x00030004, 0x00050006, 0x00070008, - 0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001 - }; - - printf(" writing to autoinc...\n"); - hpi_write_inc(TINY_AUTOINC_BASE_ADDR, dummy_data, TINY_AUTOINC_DATA_SIZE); - - printf(" reading from autoinc...\n"); - hpi_read_inc(TINY_AUTOINC_BASE_ADDR, read_data, TINY_AUTOINC_DATA_SIZE); - - printf(" reading from noinc for comparison...\n"); - for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) - read_data_noinc[i] = hpi_read_noinc(TINY_AUTOINC_BASE_ADDR+i*4); - - for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) { - printf(" written=0x%x, read(inc)=0x%x, read(noinc)=0x%x\n", - dummy_data[i], read_data[i], read_data_noinc[i]); - } - return 0; -} -#endif /* DO_TINY_TEST */ - -#endif /* CONFIG_SPC1920_HPI_TEST */ diff --git a/board/spc1920/hpi.h b/board/spc1920/hpi.h deleted file mode 100644 index db67672..0000000 --- a/board/spc1920/hpi.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * (C) Copyright 2006 - * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -int hpi_init(void); - -#ifdef CONFIG_SPC1920_HPI_TEST -int hpi_test(void); -#endif diff --git a/board/spc1920/pld.h b/board/spc1920/pld.h deleted file mode 100644 index 5beb71b..0000000 --- a/board/spc1920/pld.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __PLD_H__ -#define __PLD_H__ - -typedef struct spc1920_pld { - uchar com1_en; - uchar dsp_reset; - uchar dsp_hpi_on; - uchar superv_mode; - uchar codec_dsp_power_en; - uchar clk3_select; - uchar clk4_select; -} spc1920_pld_t; - -#endif /* __PLD_H__ */ diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c deleted file mode 100644 index 1775433..0000000 --- a/board/spc1920/spc1920.c +++ /dev/null @@ -1,248 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <mpc8xx.h> -#include "pld.h" -#include "hpi.h" - -#define _NOT_USED_ 0xFFFFFFFF - -static long int dram_size (long int, long int *, long int); - -const uint sdram_table[] = { - /* - * Single Read. (Offset 0 in UPMB RAM) - */ - 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00, - 0x1FF77C47, /* last */ - /* - * SDRAM Initialization (offset 5 in UPMB RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */ - /* - * Burst Read. (Offset 8 in UPMB RAM) - */ - 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00, - 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPMB RAM) - */ - 0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPMB RAM) - */ - 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00, - 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPMB RAM) - */ - 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC84, 0xFFFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPMB RAM) - */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immr->im_memctl; - /* volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE; */ - - long int size_b0; - long int size8, size9; - int i; - - /* - * Configure UPMB for SDRAM - */ - upmconfig (UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - udelay(100); - - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - /* burst length=4, burst type=sequential, CAS latency=2 */ - memctl->memc_mar = CONFIG_SYS_MAR; - - /* - * Map controller bank 1 to the SDRAM bank at preliminary address. - */ - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - - /* initialize memory address register */ - memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* refresh not enabled yet */ - - /* mode initialization (offset 5) */ - udelay (200); /* 0x80006105 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x05); - - /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */ - udelay (1); /* 0x80006130 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x30); - udelay (1); /* 0x80006130 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x30); - udelay (1); /* 0x80006106 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x06); - - memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */ - - udelay (200); - - /* Need at least 10 DRAM accesses to stabilize */ - for (i = 0; i < 10; ++i) { - volatile unsigned long *addr = - (volatile unsigned long *) CONFIG_SYS_SDRAM_BASE; - unsigned long val; - - val = *(addr + i); - *(addr + i) = val; - } - - /* - * Check Bank 0 Memory Size for re-configuration - * - * try 8 column mode - */ - size8 = dram_size (CONFIG_SYS_MBMR_8COL, (long *)CONFIG_SYS_SDRAM_BASE, SDRAM_MAX_SIZE); - - udelay (1000); - - /* - * try 9 column mode - */ - size9 = dram_size (CONFIG_SYS_MBMR_9COL, (long *)CONFIG_SYS_SDRAM_BASE, SDRAM_MAX_SIZE); - - if (size8 < size9) { /* leave configuration at 9 columns */ - size_b0 = size9; - memctl->memc_mbmr = CONFIG_SYS_MBMR_9COL | MBMR_PTBE; - udelay (500); - } else { /* back to 8 columns */ - size_b0 = size8; - memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE; - udelay (500); - } - - /* - * Final mapping: - */ - - memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | - OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING; - memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V; - udelay (1000); - - /* initalize the DSP Host Port Interface */ - hpi_init(); - - /* FRAM Setup */ - memctl->memc_or4 = CONFIG_SYS_OR4; - memctl->memc_br4 = CONFIG_SYS_BR4; - udelay(1000); - - return (size_b0); -} - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ -static long int dram_size (long int mbmr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mbmr = mbmr_value; - - return (get_ram_size (base, maxsize)); -} - - -/************* other stuff ******************/ - - -int board_early_init_f(void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - /* Set Go/NoGo led (PA15) to color red */ - immap->im_ioport.iop_papar &= ~0x1; - immap->im_ioport.iop_paodr &= ~0x1; - immap->im_ioport.iop_padir |= 0x1; - immap->im_ioport.iop_padat |= 0x1; - -#if 0 - /* Turn on LED PD9 */ - immap->im_ioport.iop_pdpar &= ~(0x0040); - immap->im_ioport.iop_pddir |= 0x0040; - immap->im_ioport.iop_pddat |= 0x0040; -#endif - - /* - * Enable console on SMC1. This requires turning on - * the com2_en signal and SMC1_DISABLE - */ - - /* SMC1_DISABLE: PB17 */ - immap->im_cpm.cp_pbodr &= ~0x4000; - immap->im_cpm.cp_pbpar &= ~0x4000; - immap->im_cpm.cp_pbdir |= 0x4000; - immap->im_cpm.cp_pbdat &= ~0x4000; - - /* COM2_EN: PD10 */ - immap->im_ioport.iop_pdpar &= ~0x0020; - immap->im_ioport.iop_pddir &= ~0x4000; - immap->im_ioport.iop_pddir |= 0x0020; - immap->im_ioport.iop_pddat |= 0x0020; - - -#ifdef CONFIG_SYS_SMC1_PLD_CLK4 /* SMC1 uses CLK4 from PLD */ - immap->im_cpm.cp_simode |= 0x7000; - immap->im_cpm.cp_simode &= ~(0x8000); -#endif - - return 0; -} - -int last_stage_init(void) -{ -#ifdef CONFIG_SPC1920_HPI_TEST - printf("CMB1920 Host Port Interface Test: %s\n", - hpi_test() ? "Failed!" : "OK"); -#endif - return 0; -} - -int checkboard (void) -{ - puts("Board: SPC1920\n"); - return 0; -} diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds deleted file mode 100644 index 0eb2fba..0000000 --- a/board/spc1920/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} |