mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

20 files changed, 32 insertions, 32 deletions

diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c
index dd9649c..8aa03ea 100644
--- a/board/BuR/brppt1/board.c
+++ b/board/BuR/brppt1/board.c
@@ -150,7 +150,7 @@ int board_init(void)
 	hw_watchdog_init();
 #endif
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 	gpmc_init();
 #endif
 	return 0;
diff --git a/board/BuR/brppt1/mux.c b/board/BuR/brppt1/mux.c
index 87eee70..b863d37 100644
--- a/board/BuR/brppt1/mux.c
+++ b/board/BuR/brppt1/mux.c
@@ -118,7 +118,7 @@ static struct module_pin_mux mii2_pin_mux[] = {
 	{OFFSET(gpmc_be1n), (MODE(1) | RXACTIVE)},/* MII1_COL */
 	{-1},
 };
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 static struct module_pin_mux nand_pin_mux[] = {
 	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
 	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
@@ -180,7 +180,7 @@ static struct module_pin_mux gpIOs[] = {
 	{OFFSET(mcasp0_axr0),  (MODE(7) | PULLUDDIS) },
 	/* GPIO3_17 (MCASP0_AHCLKR) - ETH2_LEDY */
 	{OFFSET(mcasp0_ahclkr), (MODE(7) | PULLUDDIS) },
-#ifndef CONFIG_NAND
+#ifndef CONFIG_MTD_RAW_NAND
 	/* GPIO2_3 - NAND_OE */
 	{OFFSET(gpmc_oen_ren), (MODE(7) | PULLDOWN_EN | RXACTIVE)},
 	/* GPIO2_4 - NAND_WEN */
@@ -241,7 +241,7 @@ void enable_board_pin_mux(void)
 	configure_module_pin_mux(i2c0_pin_mux);
 	configure_module_pin_mux(mii1_pin_mux);
 	configure_module_pin_mux(mii2_pin_mux);
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 	configure_module_pin_mux(nand_pin_mux);
 #elif defined(CONFIG_MMC)
 	configure_module_pin_mux(mmc1_pin_mux);
diff --git a/board/birdland/bav335x/board.c b/board/birdland/bav335x/board.c
index c946ea4..9eb851c 100644
--- a/board/birdland/bav335x/board.c
+++ b/board/birdland/bav335x/board.c
@@ -292,7 +292,7 @@ int board_init(void)
 #endif
 
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
+#if defined(CONFIG_NOR) || defined(CONFIG_MTD_RAW_NAND)
 	gpmc_init();
 #endif
 	return 0;
diff --git a/board/bosch/guardian/board.c b/board/bosch/guardian/board.c
index 072aa4e..32ebaf4 100644
--- a/board/bosch/guardian/board.c
+++ b/board/bosch/guardian/board.c
@@ -180,7 +180,7 @@ int board_init(void)
 
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 	gpmc_init();
 #endif
 	return 0;
diff --git a/board/bosch/guardian/mux.c b/board/bosch/guardian/mux.c
index 20a1f25..9c81f29 100644
--- a/board/bosch/guardian/mux.c
+++ b/board/bosch/guardian/mux.c
@@ -39,7 +39,7 @@ static struct module_pin_mux guardian_interfaces_pin_mux[] = {
 	{-1},
 };
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 static struct module_pin_mux nand_pin_mux[] = {
 	{OFFSET(gpmc_ad0),      (MODE(0) | PULLUDDIS | RXACTIVE)},
 	{OFFSET(gpmc_ad1),      (MODE(0) | PULLUDDIS | RXACTIVE)},
@@ -82,7 +82,7 @@ void enable_i2c0_pin_mux(void)
 
 void enable_board_pin_mux(void)
 {
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 	configure_module_pin_mux(nand_pin_mux);
 #endif
 	configure_module_pin_mux(guardian_interfaces_pin_mux);
diff --git a/board/bosch/shc/board.c b/board/bosch/shc/board.c
index 60f9c1c..440d02f 100644
--- a/board/bosch/shc/board.c
+++ b/board/bosch/shc/board.c
@@ -444,7 +444,7 @@ int board_init(void)
 		puts("EEPROM Content Invalid.\n");
 
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
+#if defined(CONFIG_NOR) || defined(CONFIG_MTD_RAW_NAND)
 	gpmc_init();
 #endif
 	shc_request_gpio();
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index 25e80c8..5792a56 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -221,7 +221,7 @@ int board_init(void)
 	else
 		config_board_mux(MUX_TYPE_SDHC);
 
-#if defined(CONFIG_NAND) && defined(CONFIG_FSL_QSPI)
+#if defined(CONFIG_MTD_RAW_NAND) && defined(CONFIG_FSL_QSPI)
 	val = in_le32(dcfg_ccsr + DCFG_RCWSR15 / 4);
 
 	if (DCFG_RCWSR15_IFCGRPABASE_QSPI == (val & (u32)0x3))
diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c
index d578a0b..ab07c1f 100644
--- a/board/freescale/t102xrdb/t102xrdb.c
+++ b/board/freescale/t102xrdb/t102xrdb.c
@@ -76,7 +76,7 @@ int checkboard(void)
 		printf("NOR vBank%d\n", reg);
 	}
 #elif defined(CONFIG_TARGET_T1023RDB)
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 	puts("NAND\n");
 #else
 	printf("NOR vBank%d\n", t1023rdb_ctrl(I2C_GET_BANK));
diff --git a/board/imgtec/ci20/ci20.c b/board/imgtec/ci20/ci20.c
index 5368b67..170ea12 100644
--- a/board/imgtec/ci20/ci20.c
+++ b/board/imgtec/ci20/ci20.c
@@ -42,7 +42,7 @@ static void ci20_mux_eth(void)
 {
 	void __iomem *gpio_regs = (void __iomem *)GPIO_BASE;
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 	/* setup pins (some already setup for NAND) */
 	writel(0x04030000, gpio_regs + GPIO_PXINTC(0));
 	writel(0x04030000, gpio_regs + GPIO_PXMASKC(0));
diff --git a/board/phytec/pcm051/mux.c b/board/phytec/pcm051/mux.c
index 6e9c3d2..9bca8ea 100644
--- a/board/phytec/pcm051/mux.c
+++ b/board/phytec/pcm051/mux.c
@@ -82,7 +82,7 @@ static struct module_pin_mux cbmux_pin_mux[] = {
 	{-1},
 };
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 static struct module_pin_mux nand_pin_mux[] = {
 	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
 	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
@@ -118,7 +118,7 @@ void enable_board_pin_mux()
 	configure_module_pin_mux(rmii1_pin_mux);
 	configure_module_pin_mux(mmc0_pin_mux);
 	configure_module_pin_mux(cbmux_pin_mux);
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 	configure_module_pin_mux(nand_pin_mux);
 #endif
 #ifdef CONFIG_SPI
diff --git a/board/phytec/phycore_am335x_r2/mux.c b/board/phytec/phycore_am335x_r2/mux.c
index 5fd452e..7091c98 100644
--- a/board/phytec/phycore_am335x_r2/mux.c
+++ b/board/phytec/phycore_am335x_r2/mux.c
@@ -72,7 +72,7 @@ static struct module_pin_mux cbmux_pin_mux[] = {
 	{-1},
 };
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 static struct module_pin_mux nand_pin_mux[] = {
 	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
 	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
@@ -108,7 +108,7 @@ void enable_board_pin_mux(void)
 	configure_module_pin_mux(rmii1_pin_mux);
 	configure_module_pin_mux(mmc0_pin_mux);
 	configure_module_pin_mux(cbmux_pin_mux);
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 	configure_module_pin_mux(nand_pin_mux);
 #endif
 #ifdef CONFIG_SPI
diff --git a/board/siemens/pxm2/mux.c b/board/siemens/pxm2/mux.c
index 9b69b6f..2f35bb4 100644
--- a/board/siemens/pxm2/mux.c
+++ b/board/siemens/pxm2/mux.c
@@ -26,7 +26,7 @@ static struct module_pin_mux uart0_pin_mux[] = {
 	{-1},
 };
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 static struct module_pin_mux nand_pin_mux[] = {
 	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
 	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
@@ -169,7 +169,7 @@ void enable_board_pin_mux(void)
 {
 	configure_module_pin_mux(uart0_pin_mux);
 	configure_module_pin_mux(i2c1_pin_mux);
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 	configure_module_pin_mux(nand_pin_mux);
 #endif
 #ifndef CONFIG_NO_ETH
diff --git a/board/sunxi/README.nand b/board/sunxi/README.nand
index 98ebe5f..0e97316 100644
--- a/board/sunxi/README.nand
+++ b/board/sunxi/README.nand
@@ -21,7 +21,7 @@ In order to accomodate that, we create a tool that will generate an
 SPL image that is ready to be programmed directly embedding the ECCs,
 randomized, and with the necessary bits needed to reduce the number of
 bitflips. The U-Boot build system, when configured for the NAND (with
-CONFIG_NAND=y) will also generate the image sunxi-spl-with-ecc.bin
+CONFIG_MTD_RAW_NAND=y) will also generate the image sunxi-spl-with-ecc.bin
 that will have been generated by that tool.
 
 In order to flash your U-Boot image onto a board, assuming that the
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 46b95c7..3d7f738 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -710,7 +710,7 @@ int board_init(void)
 #endif
 
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
+#if defined(CONFIG_NOR) || defined(CONFIG_MTD_RAW_NAND)
 	gpmc_init();
 #endif
 
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 6e1ede3..6fb2c00 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -195,7 +195,7 @@ static struct module_pin_mux rmii1_pin_mux[] = {
 	{-1},
 };
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 static struct module_pin_mux nand_pin_mux[] = {
 	{OFFSET(gpmc_ad0),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0  */
 	{OFFSET(gpmc_ad1),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1  */
@@ -360,7 +360,7 @@ void enable_board_pin_mux(void)
 		/* Beaglebone pinmux */
 		configure_module_pin_mux(mii1_pin_mux);
 		configure_module_pin_mux(mmc0_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 		configure_module_pin_mux(nand_pin_mux);
 #elif defined(CONFIG_NOR)
 		configure_module_pin_mux(bone_norcape_pin_mux);
@@ -376,7 +376,7 @@ void enable_board_pin_mux(void)
 		if (profile & ~PROFILE_2)
 			configure_module_pin_mux(i2c1_pin_mux);
 		/* Profiles 2 & 3 don't have NAND */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 		if (profile & ~(PROFILE_2 | PROFILE_3))
 			configure_module_pin_mux(nand_pin_mux);
 #endif
@@ -404,7 +404,7 @@ void enable_board_pin_mux(void)
 		}
 		/* Beaglebone LT pinmux */
 		configure_module_pin_mux(mmc0_pin_mux);
-#if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_MTD_RAW_NAND) && defined(CONFIG_EMMC_BOOT)
 		configure_module_pin_mux(nand_pin_mux);
 #elif defined(CONFIG_NOR) && defined(CONFIG_EMMC_BOOT)
 		configure_module_pin_mux(bone_norcape_pin_mux);
diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c
index a61987e..f59e93a 100644
--- a/board/ti/am43xx/mux.c
+++ b/board/ti/am43xx/mux.c
@@ -73,7 +73,7 @@ static struct module_pin_mux gpio5_7_pin_mux[] = {
 	{-1},
 };
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 static struct module_pin_mux nand_pin_mux[] = {
 	{OFFSET(gpmc_ad0),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */
 	{OFFSET(gpmc_ad1),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */
@@ -128,18 +128,18 @@ void enable_board_pin_mux(void)
 	if (board_is_evm()) {
 		configure_module_pin_mux(gpio5_7_pin_mux);
 		configure_module_pin_mux(rgmii1_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 		configure_module_pin_mux(nand_pin_mux);
 #endif
 	} else if (board_is_sk() || board_is_idk()) {
 		configure_module_pin_mux(rgmii1_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 		printf("Error: NAND flash not present on this board\n");
 #endif
 		configure_module_pin_mux(qspi_pin_mux);
 	} else if (board_is_eposevm()) {
 		configure_module_pin_mux(rmii1_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 		configure_module_pin_mux(nand_pin_mux);
 #else
 		configure_module_pin_mux(qspi_pin_mux);
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 04e9b89..79b8363 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -784,7 +784,7 @@ void set_muxconf_regs(void)
 		     early_padconf, ARRAY_SIZE(early_padconf));
 }
 
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 static int nand_sw_detect(void)
 {
 	int rc;
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
index 8f7b591..3896ebb 100644
--- a/board/ti/ti816x/evm.c
+++ b/board/ti/ti816x/evm.c
@@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_init(void)
 {
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 	gpmc_init();
 #endif
 	return 0;
diff --git a/board/vscom/baltos/board.c b/board/vscom/baltos/board.c
index 02ea1c0..c76502c 100644
--- a/board/vscom/baltos/board.c
+++ b/board/vscom/baltos/board.c
@@ -265,7 +265,7 @@ int board_init(void)
 #endif
 
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
+#if defined(CONFIG_NOR) || defined(CONFIG_MTD_RAW_NAND)
 	gpmc_init();
 #endif
 	return 0;
diff --git a/board/vscom/baltos/mux.c b/board/vscom/baltos/mux.c
index 9c5542e..e01899c 100644
--- a/board/vscom/baltos/mux.c
+++ b/board/vscom/baltos/mux.c
@@ -112,7 +112,7 @@ void enable_board_pin_mux()
 	configure_module_pin_mux(rmii1_pin_mux);
 	configure_module_pin_mux(mmc0_pin_mux);
 
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 	configure_module_pin_mux(nand_pin_mux);
 #endif
 }