powerpc: remove 4xx support

There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

254 files changed, 0 insertions, 37497 deletions

diff --git a/board/amcc/acadia/Kconfig b/board/amcc/acadia/Kconfig
deleted file mode 100644
index 033deaf..0000000
--- a/board/amcc/acadia/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_ACADIA
-
-config SYS_BOARD
-	default "acadia"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "acadia"
-
-endif
diff --git a/board/amcc/acadia/MAINTAINERS b/board/amcc/acadia/MAINTAINERS
deleted file mode 100644
index c16961f..0000000
--- a/board/amcc/acadia/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ACADIA BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/acadia/
-F:	include/configs/acadia.h
-F:	configs/acadia_defconfig
diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile
deleted file mode 100644
index 035f407..0000000
--- a/board/amcc/acadia/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= acadia.o cmd_acadia.o memory.o pll.o
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
deleted file mode 100644
index 2eb18df..0000000
--- a/board/amcc/acadia/acadia.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-extern void board_pll_init_f(void);
-
-static void acadia_gpio_init(void)
-{
-	/*
-	 * GPIO0 setup (select GPIO or alternate function)
-	 */
-	out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
-	out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH);	/* output select */
-	out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
-	out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H);	/* input select */
-	out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
-	out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH);	/* three-state select */
-	out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR);  /* enable output driver for outputs */
-
-	/*
-	 * Ultra (405EZ) was nice enough to add another GPIO controller
-	 */
-	out32(GPIO1_OSRH, CONFIG_SYS_GPIO1_OSRH);	/* output select */
-	out32(GPIO1_OSRL, CONFIG_SYS_GPIO1_OSRL);
-	out32(GPIO1_ISR1H, CONFIG_SYS_GPIO1_ISR1H);	/* input select */
-	out32(GPIO1_ISR1L, CONFIG_SYS_GPIO1_ISR1L);
-	out32(GPIO1_TSRH, CONFIG_SYS_GPIO1_TSRH);	/* three-state select */
-	out32(GPIO1_TSRL, CONFIG_SYS_GPIO1_TSRL);
-	out32(GPIO1_TCR, CONFIG_SYS_GPIO1_TCR);  /* enable output driver for outputs */
-}
-
-int board_early_init_f(void)
-{
-	unsigned int reg;
-
-	/* don't reinit PLL when booting via I2C bootstrap option */
-	mfsdr(SDR0_PINSTP, reg);
-	if (reg != 0xf0000000)
-		board_pll_init_f();
-
-	acadia_gpio_init();
-
-	/* Configure 405EZ for NAND usage */
-	mtsdr(SDR0_NAND0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
-	mfsdr(SDR0_ULTRA0, reg);
-	reg &= ~SDR_ULTRA0_CSN_MASK;
-	reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) |
-		SDR_ULTRA0_NDGPIOBP |
-		SDR_ULTRA0_EBCRDYEN |
-		SDR_ULTRA0_NFSRSTEN;
-	mtsdr(SDR0_ULTRA0, reg);
-
-	/* USB Host core needs this bit set */
-	mfsdr(SDR0_ULTRA1, reg);
-	mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE);
-
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000010);
-	mtdcr(UIC0PR, 0xFE7FFFF0);	/* set int polarities */
-	mtdcr(UIC0TR, 0x00000010);	/* set int trigger levels */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	return 0;
-}
-
-int misc_init_f(void)
-{
-	/* Set EPLD to take PHY out of reset */
-	out8(CONFIG_SYS_CPLD_BASE + 0x05, 0x00);
-	udelay(100000);
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-	u8 rev;
-
-	rev = in8(CONFIG_SYS_CPLD_BASE + 0);
-	printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return (0);
-}
diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
deleted file mode 100644
index e9df61b..0000000
--- a/board/amcc/acadia/cmd_acadia.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-
-static u8 boot_267_nor[] = {
-	0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x00,
-	0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00
-};
-
-static u8 boot_267_nand[] = {
-	0xd0, 0x38, 0xc3, 0x50, 0x13, 0x88, 0x8e, 0x00,
-	0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00
-};
-
-static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	u8 chip;
-	u8 *buf;
-	int cpu_freq;
-
-	if (argc < 3)
-		return cmd_usage(cmdtp);
-
-	cpu_freq = simple_strtol(argv[1], NULL, 10);
-	if (cpu_freq != 267) {
-		printf("Unsupported cpu-frequency - only 267 supported\n");
-		return 1;
-	}
-
-	/* use 0x50 as I2C EEPROM address for now */
-	chip = 0x50;
-
-	if ((strcmp(argv[2], "nor") != 0) &&
-	    (strcmp(argv[2], "nand") != 0)) {
-		printf("Unsupported boot-device - only nor|nand support\n");
-		return 1;
-	}
-
-	if (strcmp(argv[2], "nand") == 0) {
-		switch (cpu_freq) {
-		case 267:
-			buf = boot_267_nand;
-			break;
-		default:
-			break;
-		}
-	} else {
-		switch (cpu_freq) {
-		case 267:
-			buf = boot_267_nor;
-			break;
-		default:
-			break;
-		}
-	}
-
-	if (i2c_write(chip, 0, 1, buf, 16) != 0)
-		printf("Error writing to EEPROM at address 0x%x\n", chip);
-	udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-	if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0)
-		printf("Error2 writing to EEPROM at address 0x%x\n", chip);
-
-	printf("Done\n");
-	printf("Please power-cycle the board for the changes to take effect\n");
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	bootstrap,	3,	0,	do_bootstrap,
-	"program the I2C bootstrap EEPROM",
-	"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM"
-);
diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk
deleted file mode 100644
index 5350ec0..0000000
--- a/board/amcc/acadia/config.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2007-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-#
-# AMCC 405EZ Reference Platform (Acadia) board
-#
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
deleted file mode 100644
index 36500da..0000000
--- a/board/amcc/acadia/memory.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void board_pll_init_f(void);
-
-static void cram_bcr_write(u32 wr_val)
-{
-	wr_val <<= 2;
-
-	/* set CRAM_CRE to 1 */
-	gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 1);
-
-	/* Write BCR to CRAM on CS1 */
-	out32(wr_val + 0x00200000, 0);
-	debug("CRAM VAL: %08x for CS1 ", wr_val + 0x00200000);
-
-	/* Write BCR to CRAM on CS2 */
-	out32(wr_val + 0x02200000, 0);
-	debug("CRAM VAL: %08x for CS2\n", wr_val + 0x02200000);
-
-	sync();
-	eieio();
-
-	/* set CRAM_CRE back to 0 (normal operation) */
-	gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 0);
-
-	return;
-}
-
-int dram_init(void)
-{
-	int i;
-	u32 val;
-
-	/* 1. EBC need to program READY, CLK, ADV for ASync mode */
-	gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CONFIG_SYS_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CONFIG_SYS_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
-
-	/* 2. EBC in Async mode */
-	mtebc(PB1AP, 0x078F1EC0);
-	mtebc(PB2AP, 0x078F1EC0);
-	mtebc(PB1CR, 0x000BC000);
-	mtebc(PB2CR, 0x020BC000);
-
-	/* 3. Set CRAM in Sync mode */
-	cram_bcr_write(0x7012);		/* CRAM burst setting */
-
-	/* 4. EBC in Sync mode */
-	mtebc(PB1AP, 0x9C0201C0);
-	mtebc(PB2AP, 0x9C0201C0);
-
-	/* Set GPIO pins back to alternate function */
-	gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
-	gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
-
-	/* Config EBC to use RDY */
-	mfsdr(SDR0_ULTRA0, val);
-	mtsdr(SDR0_ULTRA0, val | SDR_ULTRA0_EBCRDYEN);
-
-	/* Wait a short while, since for NAND booting this is too fast */
-	for (i=0; i<200000; i++)
-		;
-
-	gd->ram_size = CONFIG_SYS_MBYTES_RAM << 20;
-
-	return 0;
-}
diff --git a/board/amcc/acadia/pll.c b/board/amcc/acadia/pll.c
deleted file mode 100644
index d868582..0000000
--- a/board/amcc/acadia/pll.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/ppc405.h>
-
-/* test-only: move into cpu directory!!! */
-
-#if defined(PLLMR0_200_133_66)
-void board_pll_init_f(void)
-{
-	/*
-	 * set PLL clocks based on input sysclk is 33M
-	 *
-	 * ----------------------------------
-	 * | CLK   | FREQ (MHz) | DIV RATIO |
-	 * ----------------------------------
-	 * | CPU   |  200.0     |   4 (0x02)|
-	 * | PLB   |  133.3     |   6 (0x06)|
-	 * | OPB   |   66.6     |  12 (0x0C)|
-	 * | EBC   |   66.6     |  12 (0x0C)|
-	 * | SPI   |   66.6     |  12 (0x0C)|
-	 * | UART0 |   10.0     |  40 (0x28)|
-	 * | UART1 |   10.0     |  40 (0x28)|
-	 * | DAC   |    2.0     | 200 (0xC8)|
-	 * | ADC   |    2.0     | 200 (0xC8)|
-	 * | PWM   |  100.0     |   4 (0x04)|
-	 * | EMAC  |   25.0     |  16 (0x10)|
-	 * -----------------------------------
-	 */
-
-	/* Initialize PLL */
-	mtcpr(CPR0_PLLC, 0x0000033c);
-	mtcpr(CPR0_PLLD, 0x0c010200);
-	mtcpr(CPR0_PRIMAD, 0x04060c0c);
-	mtcpr(CPR0_PERD0, 0x000c0000);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(CPR0_CLKUPD, 0x40000000);
-}
-
-#elif defined(PLLMR0_266_160_80)
-
-void board_pll_init_f(void)
-{
-	/*
-	 * set PLL clocks based on input sysclk is 33M
-	 *
-	 * ----------------------------------
-	 * | CLK   | FREQ (MHz) | DIV RATIO |
-	 * ----------------------------------
-	 * | CPU   |  266.64    |   3       |
-	 * | PLB   |  159.98    |   5 (0x05)|
-	 * | OPB   |   79.99    |  10 (0x0A)|
-	 * | EBC   |   79.99    |  10 (0x0A)|
-	 * | SPI   |   79.99    |  10 (0x0A)|
-	 * | UART0 |   28.57    |   7 (0x07)|
-	 * | UART1 |   28.57    |   7 (0x07)|
-	 * | DAC   |   28.57    |   7 (0xA7)|
-	 * | ADC   |    4       |  50 (0x32)|
-	 * | PWM   |   28.57    |   7 (0x07)|
-	 * | EMAC  |    4       |  50 (0x32)|
-	 * -----------------------------------
-	 */
-
-	/* Initialize PLL */
-	mtcpr(CPR0_PLLC, 0x20000238);
-	mtcpr(CPR0_PLLD, 0x03010400);
-	mtcpr(CPR0_PRIMAD, 0x03050a0a);
-	mtcpr(CPR0_PERC0, 0x00000000);
-	mtcpr(CPR0_PERD0, 0x070a0707);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(CPR0_PERD1, 0x07323200);
-	mtcpr(CPR0_CLKUP, 0x40000000);
-}
-
-#elif defined(PLLMR0_333_166_83)
-
-void board_pll_init_f(void)
-{
-	/*
-	 * set PLL clocks based on input sysclk is 33M
-	 *
-	 * ----------------------------------
-	 * | CLK   | FREQ (MHz) | DIV RATIO |
-	 * ----------------------------------
-	 * | CPU   |  333.33    |   2       |
-	 * | PLB   |  166.66    |   4 (0x04)|
-	 * | OPB   |   83.33    |   8 (0x08)|
-	 * | EBC   |   83.33    |   8 (0x08)|
-	 * | SPI   |   83.33    |   8 (0x08)|
-	 * | UART0 |   16.66    |   5 (0x05)|
-	 * | UART1 |   16.66    |   5 (0x05)|
-	 * | DAC   |   ????     | 166 (0xA6)|
-	 * | ADC   |   ????     | 166 (0xA6)|
-	 * | PWM   |   41.66    |   3 (0x03)|
-	 * | EMAC  |   ????     |   3 (0x03)|
-	 * -----------------------------------
-	 */
-
-	/* Initialize PLL */
-	mtcpr(CPR0_PLLC, 0x0000033C);
-	mtcpr(CPR0_PLLD, 0x0a010000);
-	mtcpr(CPR0_PRIMAD, 0x02040808);
-	mtcpr(CPR0_PERD0, 0x02080505);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(CPR0_PERD1, 0xA6A60300);
-	mtcpr(CPR0_CLKUP, 0x40000000);
-}
-
-#elif defined(PLLMR0_100_100_12)
-
-void board_pll_init_f(void)
-{
-	/*
-	 * set PLL clocks based on input sysclk is 33M
-	 *
-	 * ----------------------
-	 * | CLK   | FREQ (MHz) |
-	 * ----------------------
-	 * | CPU   |  100.00    |
-	 * | PLB   |  100.00    |
-	 * | OPB   |   12.00    |
-	 * | EBC   |   49.00    |
-	 * ----------------------
-	 */
-
-	/* Initialize PLL */
-	mtcpr(CPR0_PLLC, 0x000003BC);
-	mtcpr(CPR0_PLLD, 0x06060600);
-	mtcpr(CPR0_PRIMAD, 0x02020004);
-	mtcpr(CPR0_PERD0, 0x04002828);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(CPR0_PERD1, 0xC8C81600);
-	mtcpr(CPR0_CLKUP, 0x40000000);
-}
-#endif				/* CPU_<speed>_405EZ */
diff --git a/board/amcc/bamboo/Kconfig b/board/amcc/bamboo/Kconfig
deleted file mode 100644
index c0bd40a..0000000
--- a/board/amcc/bamboo/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_BAMBOO
-
-config SYS_BOARD
-	default "bamboo"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "bamboo"
-
-endif
diff --git a/board/amcc/bamboo/MAINTAINERS b/board/amcc/bamboo/MAINTAINERS
deleted file mode 100644
index 4c8929e..0000000
--- a/board/amcc/bamboo/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BAMBOO BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/bamboo/
-F:	include/configs/bamboo.h
-F:	configs/bamboo_defconfig
diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile
deleted file mode 100644
index 4c0a125..0000000
--- a/board/amcc/bamboo/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= bamboo.o flash.o
-extra-y	+= init.o
diff --git a/board/amcc/bamboo/README b/board/amcc/bamboo/README
deleted file mode 100644
index e139c6d..0000000
--- a/board/amcc/bamboo/README
+++ /dev/null
@@ -1,77 +0,0 @@
-The 2 important dipswitches are configured as shown below:
-
-SW1 (for 33MHz SysClk)
-----------------------
-S1   S2   S3   S4   S5   S6   S7   S8
-OFF  OFF  OFF  OFF  OFF  OFF  OFF  ON
-
-SW7 (for Op-Code Flash and Boot Option H)
------------------------------------------
-S1   S2   S3   S4   S5   S6   S7   S8
-OFF  OFF  OFF  ON   OFF  OFF  OFF  OFF
-
-The EEPROM at location 0x52 is loaded with these 16 bytes:
-C47042A6 05D7A190 40082350 0d050000
-
-SDR0_SDSTP0[ENG]:	1		: PLL's VCO is the source for PLL forward divisors
-SDR0_SDSTP0[SRC]:	1		: Feedback originates from PLLOUTB
-SDR0_SDSTP0[SEL]:	0		: Feedback selection is PLL output
-SDR0_SDSTP0[TUNE]:	1000111000	: 10 <= M <= 22, 600MHz < VCO <= 900MHz
-SDR0_SDSTP0[FBDV]:	4		: PLL feedback divisor
-SDR0_SDSTP0[FBDVA]:	2		: PLL forward divisor A
-SDR0_SDSTP0[FBDVB]:	5		: PLL forward divisor B
-SDR0_SDSTP0[PRBDV0]:	1		: PLL primary divisor B
-SDR0_SDSTP0[OPBDV0]:	2		: OPB clock divisor
-SDR0_SDSTP0[LFBDV]:	1		: PLL local feedback divisor
-SDR0_SDSTP0[PERDV0]:	3		: Peripheral clock divisor 0
-SDR0_SDSTP0[MALDV0]:	2		: MAL clock divisor 0
-SDR0_SDSTP0[PCIDV0]:	2		: Sync PCI clock divisor 0
-SDR0_SDSTP0[PLLTIMER]:	7		: PLL locking timer
-SDR0_SDSTP0[RW]:	1		: EBC ROM width: 16-bit
-SDR0_SDSTP0[RL]:	0		: EBC ROM location: EBC
-SDR0_SDSTP0[PAE]:	0		: PCI internal arbiter: disabled
-SDR0_SDSTP0[PHCE]:	0		: PCI host configuration: disabled
-SDR0_SDSTP0[ZM]:	3		: ZMII mode: RMII mode 100
-SDR0_SDSTP0[CTE]:	0		: CPU trace: disabled
-SDR0_SDSTP0[Nto1]:	0		: CPU/PLB ratio N/P: not N to 1
-SDR0_SDSTP0[PAME]:	1		: PCI asynchronous mode: enabled
-SDR0_SDSTP0[MEM]:	1		: Multiplex: EMAC
-SDR0_SDSTP0[NE]:	0		: NDFC: disabled
-SDR0_SDSTP0[NBW]:	0		: NDFC boot width: 8-bit
-SDR0_SDSTP0[NBW]:	0		: NDFC boot page selection
-SDR0_SDSTP0[NBAC]:	0		: NDFC boot address selection cycle: 3 Addr. Cycles, 1 Col. + 2 Row (512 page size)
-SDR0_SDSTP0[NARE]:	0		: NDFC auto read : disabled
-SDR0_SDSTP0[NRB]:	0		: NDFC Ready/Busy : Ready
-SDR0_SDSTP0[NDRSC]:	33333		: NDFC device reset counter
-SDR0_SDSTP0[NCG0]:	0		: NDFC/EBC chip select gating CS0 : EBC
-SDR0_SDSTP0[NCG1]:	0		: NDFC/EBC chip select gating CS1 : EBC
-SDR0_SDSTP0[NCG2]:	0		: NDFC/EBC chip select gating CS2 : EBC
-SDR0_SDSTP0[NCG3]:	0		: NDFC/EBC chip select gating CS3 : EBC
-SDR0_SDSTP0[NCRDC]:	3333		: NDFC device read count
-
-PPC440EP Clocking Configuration
-
-SysClk is 33.0MHz, M is 20, VCO is 660.0MHz, CPU is 330.0MHz, PLB is 132.0MHz
-OPB is 66.0MHz, EBC is 44.0MHz, MAL is 66.0MHz, Sync PCI is 66.0MHz
-
-The above information is reported by Eugene O'Brien
-<Eugene.O'Brien@advantechamt.com>. Thanks a lot.
-
-2007-08-06, Stefan Roese <sr@denx.de>
----------------------------------------------------------------------
-
-The configuration for the AMCC 440EP eval board "Bamboo" was changed
-to only use 384 kbytes of FLASH for the U-Boot image. This way the
-redundant environment can be saved in the remaining 2 sectors of the
-same flash chip.
-
-Caution: With an upgrade from an earlier U-Boot version the current
-environment will be erased since the environment is now saved in
-different sectors. By using the following command the environment can
-be saved after upgrading the U-Boot image and *before* resetting the
-board:
-
-setenv recover_env 'prot off FFF80000 FFF9FFFF;era FFF80000 FFF9FFFF;' \
-	'cp.b FFF60000 FFF80000 20000'
-
-2006-07-27, Stefan Roese <sr@denx.de>
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
deleted file mode 100644
index 9f64207..0000000
--- a/board/amcc/bamboo/bamboo.c
+++ /dev/null
@@ -1,1896 +0,0 @@
-/*
- * (C) Copyright 2005-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/ppc4xx-gpio.h>
-#include <spd_sdram.h>
-#include <asm/ppc440.h>
-#include "bamboo.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void ext_bus_cntlr_init(void);
-void configure_ppc440ep_pins(void);
-int is_nand_selected(void);
-
-/*************************************************************************
- *
- * Bamboo has one bank onboard sdram (plus DIMM)
- *
- * Fixed memory is composed of :
- *	MT46V16M16TG-75 from Micron (x 2), 256Mb, 16 M x16, DDR266,
- *	13 row add bits, 10 column add bits (but 12 row used only).
- *	ECC device: MT46V16M8TG-75 from Micron (x 1), 128Mb, x8, DDR266,
- *	12 row add bits, 10 column add bits.
- *	Prepare a subset (only the used ones) of SPD data
- *
- *	Note : if the ECC is enabled (SDRAM_ECC_ENABLE) the size of
- *	the corresponding bank is divided by 2 due to number of Row addresses
- *	12 in the ECC module
- *
- *  Assumes:	64 MB, ECC, non-registered
- *		PLB @ 133 MHz
- *
- ************************************************************************/
-const unsigned char cfg_simulate_spd_eeprom[128] = {
-	0x80,    /* number of SPD bytes used: 128 */
-	0x08,    /*  total number bytes in SPD device = 256 */
-	0x07,    /* DDR ram */
-#ifdef CONFIG_DDR_ECC
-	0x0C,    /* num Row Addr: 12 */
-#else
-	0x0D,    /* num Row Addr: 13 */
-#endif
-	0x09,    /* numColAddr: 9  */
-	0x01,    /* numBanks: 1 */
-	0x20,    /* Module data width: 32 bits */
-	0x00,    /* Module data width continued: +0 */
-	0x04,    /* 2.5 Volt */
-	0x75,    /* SDRAM Cycle Time (cas latency 2.5) = 7.5 ns */
-	0x00,    /* SDRAM Access from clock */
-#ifdef CONFIG_DDR_ECC
-	0x02,    /* ECC ON : 02 OFF : 00 */
-#else
-	0x00,    /* ECC ON : 02 OFF : 00 */
-#endif
-	0x82,    /* refresh Rate Type: Normal (7.8us) + Self refresh */
-	0,
-	0,
-	0x01,    /* wcsbc = 1 */
-	0,
-	0,
-	0x0C,    /* casBit (2,2.5) */
-	0,
-	0,
-	0x00,    /* not registered: 0  registered : 0x02*/
-	0,
-	0xA0,    /* SDRAM Cycle Time (cas latency 2) = 10 ns */
-	0,
-	0x00,    /* SDRAM Cycle Time (cas latency 1.5) = N.A */
-	0,
-	0x50,    /* tRpNs = 20 ns  */
-	0,
-	0x50,    /* tRcdNs = 20 ns */
-	45,      /* tRasNs */
-#ifdef CONFIG_DDR_ECC
-	0x08,    /* bankSizeID: 32MB */
-#else
-	0x10,    /* bankSizeID: 64MB */
-#endif
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0
-};
-
-#if 0
-{	   /* GPIO   Alternate1	      Alternate2	Alternate3 */
-    {
-	/* GPIO Core 0 */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_0	-> EBC_ADDR(7)	    DMA_REQ(2) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_1	-> EBC_ADDR(6)	    DMA_ACK(2) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_2	-> EBC_ADDR(5)	    DMA_EOT/TC(2) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_3	-> EBC_ADDR(4)	    DMA_REQ(3) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_4	-> EBC_ADDR(3)	    DMA_ACK(3) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_5 ................. */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_6	-> EBC_CS_N(1) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_7	-> EBC_CS_N(2) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_8	-> EBC_CS_N(3) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_ALT1 }, /* GPIO0_9	 -> EBC_CS_N(4) */
-	{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO0_10 -> EBC_CS_N(5) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_11 -> EBC_BUS_ERR */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_12 -> ZII_p0Rxd(0) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_13 -> ZII_p0Rxd(1) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_14 -> ZII_p0Rxd(2) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_15 -> ZII_p0Rxd(3) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_16 -> ZII_p0Txd(0) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_17 -> ZII_p0Txd(1) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_18 -> ZII_p0Txd(2) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_19 -> ZII_p0Txd(3) */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_20 -> ZII_p0Rx_er */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_21 -> ZII_p0Rx_dv */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_22 -> ZII_p0RxCrs */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_23 -> ZII_p0Tx_er */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_24 -> ZII_p0Tx_en */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_25 -> ZII_p0Col */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_26 ->		    USB2D_RXVALID */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_27 -> EXT_EBC_REQ	    USB2D_RXERROR */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_28 ->		    USB2D_TXVALID */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_29 -> EBC_EXT_HDLA	    USB2D_PAD_SUSPNDM */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_30 -> EBC_EXT_ACK	    USB2D_XCVRSELECT */
-	{ GPIO0_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO0_31 -> EBC_EXR_BUSREQ   USB2D_TERMSELECT */
-    },
-    {
-	/* GPIO Core 1 */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_0	-> USB2D_OPMODE0 */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_1	-> USB2D_OPMODE1 */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_2	-> UART0_DCD_N	    UART1_DSR_CTS_N   UART2_SOUT */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_3	-> UART0_8PIN_DSR_N UART1_RTS_DTR_N   UART2_SIN */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_4	-> UART0_8PIN_CTS_N		      UART3_SIN */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_5	-> UART0_RTS_N */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_6	-> UART0_DTR_N	    UART1_SOUT */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_7	-> UART0_RI_N	    UART1_SIN */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_8	-> UIC_IRQ(0) */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_9	-> UIC_IRQ(1) */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_10 -> UIC_IRQ(2) */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_11 -> UIC_IRQ(3) */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_12 -> UIC_IRQ(4)	    DMA_ACK(1) */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_13 -> UIC_IRQ(6)	    DMA_EOT/TC(1) */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_14 -> UIC_IRQ(7)	    DMA_REQ(0) */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_15 -> UIC_IRQ(8)	    DMA_ACK(0) */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_16 -> UIC_IRQ(9)	    DMA_EOT/TC(0) */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_17 -> - */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_18 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_19 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_20 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_21 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_22 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_23 ->   \	   Can be unselected thru TraceSelect Bit */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_24 ->   /	      in PowerPC440EP Chip */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_25 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_26 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_27 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_28 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_29 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_30 ->  | */
-	{ GPIO1_BASE, GPIO_DIS, GPIO_SEL }, /* GPIO1_31 -> - */
-    }
-};
-#endif
-
-/*----------------------------------------------------------------------------+
-  | EBC Devices Characteristics
-  |   Peripheral Bank Access Parameters	      -	  EBC0_BnAP
-  |   Peripheral Bank Configuration Register  -	  EBC0_BnCR
-  +----------------------------------------------------------------------------*/
-/* Small Flash */
-#define EBC0_BNAP_SMALL_FLASH				\
-	EBC0_BNAP_BME_DISABLED			|	\
-	EBC0_BNAP_TWT_ENCODE(6)			|	\
-	EBC0_BNAP_CSN_ENCODE(0)			|	\
-	EBC0_BNAP_OEN_ENCODE(1)			|	\
-	EBC0_BNAP_WBN_ENCODE(1)			|	\
-	EBC0_BNAP_WBF_ENCODE(3)			|	\
-	EBC0_BNAP_TH_ENCODE(1)			|	\
-	EBC0_BNAP_RE_ENABLED			|	\
-	EBC0_BNAP_SOR_DELAYED			|	\
-	EBC0_BNAP_BEM_WRITEONLY			|	\
-	EBC0_BNAP_PEN_DISABLED
-
-#define EBC0_BNCR_SMALL_FLASH_CS0			\
-	EBC0_BNCR_BAS_ENCODE(0xFFF00000)	|	\
-	EBC0_BNCR_BS_1MB			|	\
-	EBC0_BNCR_BU_RW				|	\
-	EBC0_BNCR_BW_8BIT
-
-#define EBC0_BNCR_SMALL_FLASH_CS4			\
-	EBC0_BNCR_BAS_ENCODE(0x87F00000)	|	\
-	EBC0_BNCR_BS_1MB			|	\
-	EBC0_BNCR_BU_RW				|	\
-	EBC0_BNCR_BW_8BIT
-
-/* Large Flash or SRAM */
-#define EBC0_BNAP_LARGE_FLASH_OR_SRAM			\
-	EBC0_BNAP_BME_DISABLED			|	\
-	EBC0_BNAP_TWT_ENCODE(8)			|	\
-	EBC0_BNAP_CSN_ENCODE(0)			|	\
-	EBC0_BNAP_OEN_ENCODE(1)			|	\
-	EBC0_BNAP_WBN_ENCODE(1)			|	\
-	EBC0_BNAP_WBF_ENCODE(1)			|	\
-	EBC0_BNAP_TH_ENCODE(2)			|	\
-	EBC0_BNAP_SOR_DELAYED			|	\
-	EBC0_BNAP_BEM_RW			|	\
-	EBC0_BNAP_PEN_DISABLED
-
-#define EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0		\
-	EBC0_BNCR_BAS_ENCODE(0xFF800000)	|	\
-	EBC0_BNCR_BS_8MB			|	\
-	EBC0_BNCR_BU_RW				|	\
-	EBC0_BNCR_BW_16BIT
-
-
-#define EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4		\
-	EBC0_BNCR_BAS_ENCODE(0x87800000)	|	\
-	EBC0_BNCR_BS_8MB			|	\
-	EBC0_BNCR_BU_RW				|	\
-	EBC0_BNCR_BW_16BIT
-
-/* NVRAM - FPGA */
-#define EBC0_BNAP_NVRAM_FPGA				\
-	EBC0_BNAP_BME_DISABLED			|	\
-	EBC0_BNAP_TWT_ENCODE(9)			|	\
-	EBC0_BNAP_CSN_ENCODE(0)			|	\
-	EBC0_BNAP_OEN_ENCODE(1)			|	\
-	EBC0_BNAP_WBN_ENCODE(1)			|	\
-	EBC0_BNAP_WBF_ENCODE(0)			|	\
-	EBC0_BNAP_TH_ENCODE(2)			|	\
-	EBC0_BNAP_RE_ENABLED			|	\
-	EBC0_BNAP_SOR_DELAYED			|	\
-	EBC0_BNAP_BEM_WRITEONLY			|	\
-	EBC0_BNAP_PEN_DISABLED
-
-#define EBC0_BNCR_NVRAM_FPGA_CS5			\
-	EBC0_BNCR_BAS_ENCODE(0x80000000)	|	\
-	EBC0_BNCR_BS_1MB			|	\
-	EBC0_BNCR_BU_RW				|	\
-	EBC0_BNCR_BW_8BIT
-
-/* Nand Flash */
-#define EBC0_BNAP_NAND_FLASH				\
-	EBC0_BNAP_BME_DISABLED			|	\
-	EBC0_BNAP_TWT_ENCODE(3)			|	\
-	EBC0_BNAP_CSN_ENCODE(0)			|	\
-	EBC0_BNAP_OEN_ENCODE(0)			|	\
-	EBC0_BNAP_WBN_ENCODE(0)			|	\
-	EBC0_BNAP_WBF_ENCODE(0)			|	\
-	EBC0_BNAP_TH_ENCODE(1)			|	\
-	EBC0_BNAP_RE_ENABLED			|	\
-	EBC0_BNAP_SOR_NOT_DELAYED		|	\
-	EBC0_BNAP_BEM_RW			|	\
-	EBC0_BNAP_PEN_DISABLED
-
-
-#define EBC0_BNCR_NAND_FLASH_CS0	0xB8400000
-
-/* NAND0 */
-#define EBC0_BNCR_NAND_FLASH_CS1			\
-	EBC0_BNCR_BAS_ENCODE(0x90000000)	|	\
-	EBC0_BNCR_BS_1MB			|	\
-	EBC0_BNCR_BU_RW				|	\
-	EBC0_BNCR_BW_32BIT
-/* NAND1 - Bank2 */
-#define EBC0_BNCR_NAND_FLASH_CS2			\
-	EBC0_BNCR_BAS_ENCODE(0x94000000)	|	\
-	EBC0_BNCR_BS_1MB			|	\
-	EBC0_BNCR_BU_RW				|	\
-	EBC0_BNCR_BW_32BIT
-
-/* NAND1 - Bank3 */
-#define EBC0_BNCR_NAND_FLASH_CS3			\
-	EBC0_BNCR_BAS_ENCODE(0x94000000)	|	\
-	EBC0_BNCR_BS_1MB			|	\
-	EBC0_BNCR_BU_RW				|	\
-	EBC0_BNCR_BW_32BIT
-
-int board_early_init_f(void)
-{
-	ext_bus_cntlr_init();
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000009);	/* ATI & UIC1 crit are critical */
-	mtdcr(UIC0PR, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(UIC0TR, 0x01c00008);	/* per ref-board manual */
-	mtdcr(UIC0VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(UIC1TR, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	/*--------------------------------------------------------------------
-	 * Setup the GPIO pins
-	 *-------------------------------------------------------------------*/
-	out32(GPIO0_OSRL,  0x00000400);
-	out32(GPIO0_OSRH,  0x00000000);
-	out32(GPIO0_TSRL,  0x00000400);
-	out32(GPIO0_TSRH,  0x00000000);
-	out32(GPIO0_ISR1L, 0x00000000);
-	out32(GPIO0_ISR1H, 0x00000000);
-	out32(GPIO0_ISR2L, 0x00000000);
-	out32(GPIO0_ISR2H, 0x00000000);
-	out32(GPIO0_ISR3L, 0x00000000);
-	out32(GPIO0_ISR3H, 0x00000000);
-
-	out32(GPIO1_OSRL,  0x0C380000);
-	out32(GPIO1_OSRH,  0x00000000);
-	out32(GPIO1_TSRL,  0x0C380000);
-	out32(GPIO1_TSRH,  0x00000000);
-	out32(GPIO1_ISR1L, 0x0FC30000);
-	out32(GPIO1_ISR1H, 0x00000000);
-	out32(GPIO1_ISR2L, 0x0C010000);
-	out32(GPIO1_ISR2H, 0x00000000);
-	out32(GPIO1_ISR3L, 0x01400000);
-	out32(GPIO1_ISR3H, 0x00000000);
-
-	configure_ppc440ep_pins();
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: Bamboo - AMCC PPC440EP Evaluation Board");
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-
-int dram_init(void)
-{
-	gd->ram_size = spd_sdram();
-
-	return 0;
-}
-
-/*----------------------------------------------------------------------------+
-  | is_powerpc440ep_pass1.
-  +----------------------------------------------------------------------------*/
-int is_powerpc440ep_pass1(void)
-{
-	unsigned long pvr;
-
-	pvr = get_pvr();
-
-	if (pvr == PVR_POWERPC_440EP_PASS1)
-		return true;
-	else if (pvr == PVR_POWERPC_440EP_PASS2)
-		return false;
-	else {
-		printf("brdutil error 3\n");
-		for (;;)
-			;
-	}
-
-	return false;
-}
-
-/*----------------------------------------------------------------------------+
-  | is_nand_selected.
-  +----------------------------------------------------------------------------*/
-int is_nand_selected(void)
-{
-#ifdef CONFIG_BAMBOO_NAND
-	return true;
-#else
-	return false;
-#endif
-}
-
-/*----------------------------------------------------------------------------+
-  | config_on_ebc_cs4_is_small_flash => from EPLD
-  +----------------------------------------------------------------------------*/
-unsigned char config_on_ebc_cs4_is_small_flash(void)
-{
-	/* Not implemented yet => returns constant value */
-	return true;
-}
-
-/*----------------------------------------------------------------------------+
-  | Ext_bus_cntlr_init.
-  | Initialize the external bus controller
-  +----------------------------------------------------------------------------*/
-void ext_bus_cntlr_init(void)
-{
-	unsigned long sdr0_pstrp0, sdr0_sdstp1;
-	unsigned long bootstrap_settings, boot_selection, ebc_boot_size;
-	int	      computed_boot_device = BOOT_DEVICE_UNKNOWN;
-	unsigned long ebc0_cs0_bnap_value = 0, ebc0_cs0_bncr_value = 0;
-	unsigned long ebc0_cs1_bnap_value = 0, ebc0_cs1_bncr_value = 0;
-	unsigned long ebc0_cs2_bnap_value = 0, ebc0_cs2_bncr_value = 0;
-	unsigned long ebc0_cs3_bnap_value = 0, ebc0_cs3_bncr_value = 0;
-	unsigned long ebc0_cs4_bnap_value = 0, ebc0_cs4_bncr_value = 0;
-
-
-	/*-------------------------------------------------------------------------+
-	  |
-	  |  PART 1 : Initialize EBC Bank 5
-	  |  ==============================
-	  | Bank5 is always associated to the NVRAM/EPLD.
-	  | It has to be initialized prior to other banks settings computation since
-	  | some board registers values may be needed
-	  |
-	  +-------------------------------------------------------------------------*/
-	/* NVRAM - FPGA */
-	mtebc(PB5AP, EBC0_BNAP_NVRAM_FPGA);
-	mtebc(PB5CR, EBC0_BNCR_NVRAM_FPGA_CS5);
-
-	/*-------------------------------------------------------------------------+
-	  |
-	  |  PART 2 : Determine which boot device was selected
-	  |  =========================================
-	  |
-	  |  Read Pin Strap Register in PPC440EP
-	  |  In case of boot from IIC, read Serial Device Strap Register1
-	  |
-	  |  Result can either be :
-	  |   - Boot from EBC 8bits    => SMALL FLASH
-	  |   - Boot from EBC 16bits   => Large Flash or SRAM
-	  |   - Boot from NAND Flash
-	  |   - Boot from PCI
-	  |
-	  +-------------------------------------------------------------------------*/
-	/* Read Pin Strap Register in PPC440EP */
-	mfsdr(SDR0_PINSTP, sdr0_pstrp0);
-	bootstrap_settings = sdr0_pstrp0 & SDR0_PSTRP0_BOOTSTRAP_MASK;
-
-	/*-------------------------------------------------------------------------+
-	  |  PPC440EP Pass1
-	  +-------------------------------------------------------------------------*/
-	if (is_powerpc440ep_pass1() == true) {
-		switch(bootstrap_settings) {
-		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
-			/* Default Strap Settings 0 : CPU 400 - PLB 133 - Boot EBC 8 bit 33MHz */
-			/* Boot from Small Flash */
-			computed_boot_device = BOOT_FROM_SMALL_FLASH;
-			break;
-		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1:
-			/* Default Strap Settings 1 : CPU 533 - PLB 133 - Boot PCI 66MHz */
-			/* Boot from PCI */
-			computed_boot_device = BOOT_FROM_PCI;
-			break;
-
-		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2:
-			/* Default Strap Settings 2 : CPU 500 - PLB 100 - Boot NDFC16 66MHz */
-			/* Boot from Nand Flash */
-			computed_boot_device = BOOT_FROM_NAND_FLASH0;
-			break;
-
-		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS3:
-			/* Default Strap Settings 3 : CPU 333 - PLB 133 - Boot EBC 8 bit 66MHz */
-			/* Boot from Small Flash */
-			computed_boot_device = BOOT_FROM_SMALL_FLASH;
-			break;
-
-		case SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN:
-		case SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN:
-			/* Boot Settings in IIC EEprom address 0xA8 or 0xA4 */
-			/* Read Serial Device Strap Register1 in PPC440EP */
-			mfsdr(SDR0_SDSTP1, sdr0_sdstp1);
-			boot_selection	= sdr0_sdstp1 & SDR0_SDSTP1_BOOT_SEL_MASK;
-			ebc_boot_size	= sdr0_sdstp1 & SDR0_SDSTP1_EBC_ROM_BS_MASK;
-
-			switch(boot_selection) {
-			case SDR0_SDSTP1_BOOT_SEL_EBC:
-				switch(ebc_boot_size) {
-				case SDR0_SDSTP1_EBC_ROM_BS_16BIT:
-					computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM;
-					break;
-				case SDR0_SDSTP1_EBC_ROM_BS_8BIT:
-					computed_boot_device = BOOT_FROM_SMALL_FLASH;
-					break;
-				}
-				break;
-
-			case SDR0_SDSTP1_BOOT_SEL_PCI:
-				computed_boot_device = BOOT_FROM_PCI;
-				break;
-
-			case SDR0_SDSTP1_BOOT_SEL_NDFC:
-				computed_boot_device = BOOT_FROM_NAND_FLASH0;
-				break;
-			}
-			break;
-		}
-	}
-
-	/*-------------------------------------------------------------------------+
-	  |  PPC440EP Pass2
-	  +-------------------------------------------------------------------------*/
-	else {
-		switch(bootstrap_settings) {
-		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
-			/* Default Strap Settings 0 : CPU 400 - PLB 133 - Boot EBC 8 bit 33MHz */
-			/* Boot from Small Flash */
-			computed_boot_device = BOOT_FROM_SMALL_FLASH;
-			break;
-		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1:
-			/* Default Strap Settings 1 : CPU 333 - PLB 133 - Boot PCI 66MHz */
-			/* Boot from PCI */
-			computed_boot_device = BOOT_FROM_PCI;
-			break;
-
-		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2:
-			/* Default Strap Settings 2 : CPU 400 - PLB 100 - Boot NDFC16 33MHz */
-			/* Boot from Nand Flash */
-			computed_boot_device = BOOT_FROM_NAND_FLASH0;
-			break;
-
-		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS3:
-			/* Default Strap Settings 3 : CPU 400 - PLB 100 - Boot EBC 16 bit 33MHz */
-			/* Boot from Large Flash or SRAM */
-			computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM;
-			break;
-
-		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS4:
-			/* Default Strap Settings 4 : CPU 333 - PLB 133 - Boot EBC 16 bit 66MHz */
-			/* Boot from Large Flash or SRAM */
-			computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM;
-			break;
-
-		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS6:
-			/* Default Strap Settings 6 : CPU 400 - PLB 100 - Boot PCI 33MHz */
-			/* Boot from PCI */
-			computed_boot_device = BOOT_FROM_PCI;
-			break;
-
-		case SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN:
-		case SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN:
-			/* Default Strap Settings 5-7 */
-			/* Boot Settings in IIC EEprom address 0xA8 or 0xA4 */
-			/* Read Serial Device Strap Register1 in PPC440EP */
-			mfsdr(SDR0_SDSTP1, sdr0_sdstp1);
-			boot_selection	= sdr0_sdstp1 & SDR0_SDSTP1_BOOT_SEL_MASK;
-			ebc_boot_size	= sdr0_sdstp1 & SDR0_SDSTP1_EBC_ROM_BS_MASK;
-
-			switch(boot_selection) {
-			case SDR0_SDSTP1_BOOT_SEL_EBC:
-				switch(ebc_boot_size) {
-				case SDR0_SDSTP1_EBC_ROM_BS_16BIT:
-					computed_boot_device = BOOT_FROM_LARGE_FLASH_OR_SRAM;
-					break;
-				case SDR0_SDSTP1_EBC_ROM_BS_8BIT:
-					computed_boot_device = BOOT_FROM_SMALL_FLASH;
-					break;
-				}
-				break;
-
-			case SDR0_SDSTP1_BOOT_SEL_PCI:
-				computed_boot_device = BOOT_FROM_PCI;
-				break;
-
-			case SDR0_SDSTP1_BOOT_SEL_NDFC:
-				computed_boot_device = BOOT_FROM_NAND_FLASH0;
-				break;
-			}
-			break;
-		}
-	}
-
-	/*-------------------------------------------------------------------------+
-	  |
-	  |  PART 3 : Compute EBC settings depending on selected boot device
-	  |  ======   ======================================================
-	  |
-	  | Resulting EBC init will be among following configurations :
-	  |
-	  |  - Boot from EBC 8bits => boot from SMALL FLASH selected
-	  |	       EBC-CS0	   = Small Flash
-	  |	       EBC-CS1,2,3 = NAND Flash or
-	  |			    Exp.Slot depending on Soft Config
-	  |	       EBC-CS4	   = SRAM/Large Flash or
-	  |			    Large Flash/SRAM depending on jumpers
-	  |	       EBC-CS5	   = NVRAM / EPLD
-	  |
-	  |  - Boot from EBC 16bits => boot from Large Flash or SRAM selected
-	  |	       EBC-CS0	   = SRAM/Large Flash or
-	  |			     Large Flash/SRAM depending on jumpers
-	  |	       EBC-CS1,2,3 = NAND Flash or
-	  |			     Exp.Slot depending on Software Configuration
-	  |	       EBC-CS4	   = Small Flash
-	  |	       EBC-CS5	   = NVRAM / EPLD
-	  |
-	  |  - Boot from NAND Flash
-	  |	       EBC-CS0	   = NAND Flash0
-	  |	       EBC-CS1,2,3 = NAND Flash1
-	  |	       EBC-CS4	   = SRAM/Large Flash or
-	  |			     Large Flash/SRAM depending on jumpers
-	  |	       EBC-CS5	   = NVRAM / EPLD
-	  |
-	  |    - Boot from PCI
-	  |	       EBC-CS0	   = ...
-	  |	       EBC-CS1,2,3 = NAND Flash or
-	  |			     Exp.Slot depending on Software Configuration
-	  |	       EBC-CS4	   = SRAM/Large Flash or
-	  |			     Large Flash/SRAM or
-	  |			     Small Flash depending on jumpers
-	  |	       EBC-CS5	   = NVRAM / EPLD
-	  |
-	  +-------------------------------------------------------------------------*/
-
-	switch(computed_boot_device) {
-		/*------------------------------------------------------------------------- */
-	case BOOT_FROM_SMALL_FLASH:
-		/*------------------------------------------------------------------------- */
-		ebc0_cs0_bnap_value = EBC0_BNAP_SMALL_FLASH;
-		ebc0_cs0_bncr_value = EBC0_BNCR_SMALL_FLASH_CS0;
-		if ((is_nand_selected()) == true) {
-			/* NAND Flash */
-			ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
-			ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
-			ebc0_cs2_bnap_value = EBC0_BNAP_NAND_FLASH;
-			ebc0_cs2_bncr_value = EBC0_BNCR_NAND_FLASH_CS2;
-			ebc0_cs3_bnap_value = 0;
-			ebc0_cs3_bncr_value = 0;
-		} else {
-			/* Expansion Slot */
-			ebc0_cs1_bnap_value = 0;
-			ebc0_cs1_bncr_value = 0;
-			ebc0_cs2_bnap_value = 0;
-			ebc0_cs2_bncr_value = 0;
-			ebc0_cs3_bnap_value = 0;
-			ebc0_cs3_bncr_value = 0;
-		}
-		ebc0_cs4_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM;
-		ebc0_cs4_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4;
-
-		break;
-
-		/*------------------------------------------------------------------------- */
-	case BOOT_FROM_LARGE_FLASH_OR_SRAM:
-		/*------------------------------------------------------------------------- */
-		ebc0_cs0_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM;
-		ebc0_cs0_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0;
-		if ((is_nand_selected()) == true) {
-			/* NAND Flash */
-			ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
-			ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
-			ebc0_cs2_bnap_value = 0;
-			ebc0_cs2_bncr_value = 0;
-			ebc0_cs3_bnap_value = 0;
-			ebc0_cs3_bncr_value = 0;
-		} else {
-			/* Expansion Slot */
-			ebc0_cs1_bnap_value = 0;
-			ebc0_cs1_bncr_value = 0;
-			ebc0_cs2_bnap_value = 0;
-			ebc0_cs2_bncr_value = 0;
-			ebc0_cs3_bnap_value = 0;
-			ebc0_cs3_bncr_value = 0;
-		}
-		ebc0_cs4_bnap_value = EBC0_BNAP_SMALL_FLASH;
-		ebc0_cs4_bncr_value = EBC0_BNCR_SMALL_FLASH_CS4;
-
-		break;
-
-		/*------------------------------------------------------------------------- */
-	case BOOT_FROM_NAND_FLASH0:
-		/*------------------------------------------------------------------------- */
-		ebc0_cs0_bnap_value = EBC0_BNAP_NAND_FLASH;
-		ebc0_cs0_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
-
-		ebc0_cs1_bnap_value = 0;
-		ebc0_cs1_bncr_value = 0;
-		ebc0_cs2_bnap_value = 0;
-		ebc0_cs2_bncr_value = 0;
-		ebc0_cs3_bnap_value = 0;
-		ebc0_cs3_bncr_value = 0;
-
-		/* Large Flash or SRAM */
-		ebc0_cs4_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM;
-		ebc0_cs4_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4;
-
-		break;
-
-		/*------------------------------------------------------------------------- */
-	case BOOT_FROM_PCI:
-		/*------------------------------------------------------------------------- */
-		ebc0_cs0_bnap_value = 0;
-		ebc0_cs0_bncr_value = 0;
-
-		if ((is_nand_selected()) == true) {
-			/* NAND Flash */
-			ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
-			ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
-			ebc0_cs2_bnap_value = 0;
-			ebc0_cs2_bncr_value = 0;
-			ebc0_cs3_bnap_value = 0;
-			ebc0_cs3_bncr_value = 0;
-		} else {
-			/* Expansion Slot */
-			ebc0_cs1_bnap_value = 0;
-			ebc0_cs1_bncr_value = 0;
-			ebc0_cs2_bnap_value = 0;
-			ebc0_cs2_bncr_value = 0;
-			ebc0_cs3_bnap_value = 0;
-			ebc0_cs3_bncr_value = 0;
-		}
-
-		if ((config_on_ebc_cs4_is_small_flash()) == true) {
-			/* Small Flash */
-			ebc0_cs4_bnap_value = EBC0_BNAP_SMALL_FLASH;
-			ebc0_cs4_bncr_value = EBC0_BNCR_SMALL_FLASH_CS4;
-		} else {
-			/* Large Flash or SRAM */
-			ebc0_cs4_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM;
-			ebc0_cs4_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4;
-		}
-
-		break;
-
-		/*------------------------------------------------------------------------- */
-	case BOOT_DEVICE_UNKNOWN:
-		/*------------------------------------------------------------------------- */
-		/* Error */
-		break;
-
-	}
-
-
-	/*-------------------------------------------------------------------------+
-	  | Initialize EBC CONFIG
-	  +-------------------------------------------------------------------------*/
-	mtdcr(EBC0_CFGADDR, EBC0_CFG);
-	mtdcr(EBC0_CFGDATA, EBC0_CFG_EBTC_DRIVEN	   |
-	      EBC0_CFG_PTD_ENABLED	  |
-	      EBC0_CFG_RTC_2048PERCLK	  |
-	      EBC0_CFG_EMPL_LOW		  |
-	      EBC0_CFG_EMPH_LOW		  |
-	      EBC0_CFG_CSTC_DRIVEN	  |
-	      EBC0_CFG_BPF_ONEDW	  |
-	      EBC0_CFG_EMS_8BIT		  |
-	      EBC0_CFG_PME_DISABLED	  |
-	      EBC0_CFG_PMT_ENCODE(0)	  );
-
-	/*-------------------------------------------------------------------------+
-	  | Initialize EBC Bank 0-4
-	  +-------------------------------------------------------------------------*/
-	/* EBC Bank0 */
-	mtebc(PB0AP, ebc0_cs0_bnap_value);
-	mtebc(PB0CR, ebc0_cs0_bncr_value);
-	/* EBC Bank1 */
-	mtebc(PB1AP, ebc0_cs1_bnap_value);
-	mtebc(PB1CR, ebc0_cs1_bncr_value);
-	/* EBC Bank2 */
-	mtebc(PB2AP, ebc0_cs2_bnap_value);
-	mtebc(PB2CR, ebc0_cs2_bncr_value);
-	/* EBC Bank3 */
-	mtebc(PB3AP, ebc0_cs3_bnap_value);
-	mtebc(PB3CR, ebc0_cs3_bncr_value);
-	/* EBC Bank4 */
-	mtebc(PB4AP, ebc0_cs4_bnap_value);
-	mtebc(PB4CR, ebc0_cs4_bncr_value);
-
-	return;
-}
-
-
-/*----------------------------------------------------------------------------+
-  | get_uart_configuration.
-  +----------------------------------------------------------------------------*/
-uart_config_nb_t get_uart_configuration(void)
-{
-	return (L4);
-}
-
-/*----------------------------------------------------------------------------+
-  | set_phy_configuration_through_fpga => to EPLD
-  +----------------------------------------------------------------------------*/
-void set_phy_configuration_through_fpga(zmii_config_t config)
-{
-
-	unsigned long fpga_selection_reg;
-
-	fpga_selection_reg = in8(FPGA_SELECTION_1_REG) & ~FPGA_SEL_1_REG_PHY_MASK;
-
-	switch(config)
-	{
-	case ZMII_CONFIGURATION_IS_MII:
-		fpga_selection_reg = fpga_selection_reg | FPGA_SEL_1_REG_MII;
-		break;
-	case ZMII_CONFIGURATION_IS_RMII:
-		fpga_selection_reg = fpga_selection_reg | FPGA_SEL_1_REG_RMII;
-		break;
-	case ZMII_CONFIGURATION_IS_SMII:
-		fpga_selection_reg = fpga_selection_reg | FPGA_SEL_1_REG_SMII;
-		break;
-	case ZMII_CONFIGURATION_UNKNOWN:
-	default:
-		break;
-	}
-	out8(FPGA_SELECTION_1_REG,fpga_selection_reg);
-
-}
-
-/*----------------------------------------------------------------------------+
-  | scp_selection_in_fpga.
-  +----------------------------------------------------------------------------*/
-void scp_selection_in_fpga(void)
-{
-	unsigned long fpga_selection_2_reg;
-
-	fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_IIC1_SCP_SEL_MASK;
-	fpga_selection_2_reg |= FPGA_SEL2_REG_SEL_SCP;
-	out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
-}
-
-/*----------------------------------------------------------------------------+
-  | iic1_selection_in_fpga.
-  +----------------------------------------------------------------------------*/
-void iic1_selection_in_fpga(void)
-{
-	unsigned long fpga_selection_2_reg;
-
-	fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_IIC1_SCP_SEL_MASK;
-	fpga_selection_2_reg |= FPGA_SEL2_REG_SEL_IIC1;
-	out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
-}
-
-/*----------------------------------------------------------------------------+
-  | dma_a_b_selection_in_fpga.
-  +----------------------------------------------------------------------------*/
-void dma_a_b_selection_in_fpga(void)
-{
-	unsigned long fpga_selection_2_reg;
-
-	fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) | FPGA_SEL2_REG_SEL_DMA_A_B;
-	out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
-}
-
-/*----------------------------------------------------------------------------+
-  | dma_a_b_unselect_in_fpga.
-  +----------------------------------------------------------------------------*/
-void dma_a_b_unselect_in_fpga(void)
-{
-	unsigned long fpga_selection_2_reg;
-
-	fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_SEL_DMA_A_B;
-	out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
-}
-
-/*----------------------------------------------------------------------------+
-  | dma_c_d_selection_in_fpga.
-  +----------------------------------------------------------------------------*/
-void dma_c_d_selection_in_fpga(void)
-{
-	unsigned long fpga_selection_2_reg;
-
-	fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) | FPGA_SEL2_REG_SEL_DMA_C_D;
-	out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
-}
-
-/*----------------------------------------------------------------------------+
-  | dma_c_d_unselect_in_fpga.
-  +----------------------------------------------------------------------------*/
-void dma_c_d_unselect_in_fpga(void)
-{
-	unsigned long fpga_selection_2_reg;
-
-	fpga_selection_2_reg = in8(FPGA_SELECTION_2_REG) & ~FPGA_SEL2_REG_SEL_DMA_C_D;
-	out8(FPGA_SELECTION_2_REG,fpga_selection_2_reg);
-}
-
-/*----------------------------------------------------------------------------+
-  | usb2_device_selection_in_fpga.
-  +----------------------------------------------------------------------------*/
-void usb2_device_selection_in_fpga(void)
-{
-	unsigned long fpga_selection_1_reg;
-
-	fpga_selection_1_reg = in8(FPGA_SELECTION_1_REG) | FPGA_SEL_1_REG_USB2_DEV_SEL;
-	out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg);
-}
-
-/*----------------------------------------------------------------------------+
-  | usb2_device_reset_through_fpga.
-  +----------------------------------------------------------------------------*/
-void usb2_device_reset_through_fpga(void)
-{
-	/* Perform soft Reset pulse */
-	unsigned long fpga_reset_reg;
-	int i;
-
-	fpga_reset_reg = in8(FPGA_RESET_REG);
-	out8(FPGA_RESET_REG,fpga_reset_reg | FPGA_RESET_REG_RESET_USB20_DEV);
-	for (i=0; i<500; i++)
-		udelay(1000);
-	out8(FPGA_RESET_REG,fpga_reset_reg);
-}
-
-/*----------------------------------------------------------------------------+
-  | usb2_host_selection_in_fpga.
-  +----------------------------------------------------------------------------*/
-void usb2_host_selection_in_fpga(void)
-{
-	unsigned long fpga_selection_1_reg;
-
-	fpga_selection_1_reg = in8(FPGA_SELECTION_1_REG) | FPGA_SEL_1_REG_USB2_HOST_SEL;
-	out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg);
-}
-
-/*----------------------------------------------------------------------------+
-  | ndfc_selection_in_fpga.
-  +----------------------------------------------------------------------------*/
-void ndfc_selection_in_fpga(void)
-{
-	unsigned long fpga_selection_1_reg;
-
-	fpga_selection_1_reg  = in8(FPGA_SELECTION_1_REG) &~FPGA_SEL_1_REG_NF_SELEC_MASK;
-	fpga_selection_1_reg |= FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1;
-	fpga_selection_1_reg |= FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2;
-	out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg);
-}
-
-/*----------------------------------------------------------------------------+
-  | uart_selection_in_fpga.
-  +----------------------------------------------------------------------------*/
-void uart_selection_in_fpga(uart_config_nb_t uart_config)
-{
-	/* FPGA register */
-	unsigned char	fpga_selection_3_reg;
-
-	/* Read FPGA Reagister */
-	fpga_selection_3_reg = in8(FPGA_SELECTION_3_REG);
-
-	switch (uart_config)
-	{
-	case L1:
-		/* ----------------------------------------------------------------------- */
-		/* L1 configuration:	UART0 = 8 pins */
-		/* ----------------------------------------------------------------------- */
-		/* Configure FPGA */
-		fpga_selection_3_reg	= fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK;
-		fpga_selection_3_reg	= fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG1;
-		out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg);
-
-		break;
-
-	case L2:
-		/* ----------------------------------------------------------------------- */
-		/* L2 configuration:	UART0 = 4 pins */
-		/*			UART1 = 4 pins */
-		/* ----------------------------------------------------------------------- */
-		/* Configure FPGA */
-		fpga_selection_3_reg	= fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK;
-		fpga_selection_3_reg	= fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG2;
-		out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg);
-
-		break;
-
-	case L3:
-		/* ----------------------------------------------------------------------- */
-		/* L3 configuration:	UART0 = 4 pins */
-		/*			UART1 = 2 pins */
-		/*			UART2 = 2 pins */
-		/* ----------------------------------------------------------------------- */
-		/* Configure FPGA */
-		fpga_selection_3_reg	= fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK;
-		fpga_selection_3_reg	= fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG3;
-		out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg);
-		break;
-
-	case L4:
-		/* Configure FPGA */
-		fpga_selection_3_reg	= fpga_selection_3_reg & ~FPGA_SEL3_REG_SEL_UART_CONFIG_MASK;
-		fpga_selection_3_reg	= fpga_selection_3_reg | FPGA_SEL3_REG_SEL_UART_CONFIG4;
-		out8(FPGA_SELECTION_3_REG, fpga_selection_3_reg);
-
-		break;
-
-	default:
-		/* Unsupported UART configuration number */
-		for (;;)
-			;
-		break;
-
-	}
-}
-
-
-/*----------------------------------------------------------------------------+
-  | init_default_gpio
-  +----------------------------------------------------------------------------*/
-void init_default_gpio(gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	int i;
-
-	/* Init GPIO0 */
-	for(i=0; i<GPIO_MAX; i++)
-	{
-		gpio_tab[GPIO0][i].add	  = GPIO0_BASE;
-		gpio_tab[GPIO0][i].in_out = GPIO_DIS;
-		gpio_tab[GPIO0][i].alt_nb = GPIO_SEL;
-	}
-
-	/* Init GPIO1 */
-	for(i=0; i<GPIO_MAX; i++)
-	{
-		gpio_tab[GPIO1][i].add	  = GPIO1_BASE;
-		gpio_tab[GPIO1][i].in_out = GPIO_DIS;
-		gpio_tab[GPIO1][i].alt_nb = GPIO_SEL;
-	}
-
-	/* EBC_CS_N(5) - GPIO0_10 */
-	gpio_tab[GPIO0][10].in_out    = GPIO_OUT;
-	gpio_tab[GPIO0][10].alt_nb    = GPIO_ALT1;
-
-	/* EBC_CS_N(4) - GPIO0_9 */
-	gpio_tab[GPIO0][9].in_out    = GPIO_OUT;
-	gpio_tab[GPIO0][9].alt_nb    = GPIO_ALT1;
-}
-
-/*----------------------------------------------------------------------------+
-  | update_uart_ios
-  +------------------------------------------------------------------------------
-  |
-  | Set UART Configuration in PowerPC440EP
-  |
-  | +---------------------------------------------------------------------+
-  | | Configuartion   |	  Connector   | Nb of pins | Pins   | Associated  |
-  | |	 Number	      |	  Port Name   |	 available | naming |	CORE	  |
-  | +-----------------+---------------+------------+--------+-------------+
-  | |	  L1	      |	  Port_A      |	    8	   | UART   | UART core 0 |
-  | +-----------------+---------------+------------+--------+-------------+
-  | |	  L2	      |	  Port_A      |	    4	   | UART1  | UART core 0 |
-  | |	 (L2D)	      |	  Port_B      |	    4	   | UART2  | UART core 1 |
-  | +-----------------+---------------+------------+--------+-------------+
-  | |	  L3	      |	  Port_A      |	    4	   | UART1  | UART core 0 |
-  | |	 (L3D)	      |	  Port_B      |	    2	   | UART2  | UART core 1 |
-  | |		      |	  Port_C      |	    2	   | UART3  | UART core 2 |
-  | +-----------------+---------------+------------+--------+-------------+
-  | |		      |	  Port_A      |	    2	   | UART1  | UART core 0 |
-  | |	  L4	      |	  Port_B      |	    2	   | UART2  | UART core 1 |
-  | |	 (L4D)	      |	  Port_C      |	    2	   | UART3  | UART core 2 |
-  | |		      |	  Port_D      |	    2	   | UART4  | UART core 3 |
-  | +-----------------+---------------+------------+--------+-------------+
-  |
-  |  Involved GPIOs
-  |
-  | +------------------------------------------------------------------------------+
-  | |  GPIO   |	  Aternate 1	 | I/O |  Alternate 2	 | I/O | Alternate 3 | I/O |
-  | +---------+------------------+-----+-----------------+-----+-------------+-----+
-  | | GPIO1_2 | UART0_DCD_N	 |  I  | UART1_DSR_CTS_N |  I  | UART2_SOUT  |	O  |
-  | | GPIO1_3 | UART0_8PIN_DSR_N |  I  | UART1_RTS_DTR_N |  O  | UART2_SIN   |	I  |
-  | | GPIO1_4 | UART0_8PIN_CTS_N |  I  | NA		 |  NA | UART3_SIN   |	I  |
-  | | GPIO1_5 | UART0_RTS_N	 |  O  | NA		 |  NA | UART3_SOUT  |	O  |
-  | | GPIO1_6 | UART0_DTR_N	 |  O  | UART1_SOUT	 |  O  | NA	     |	NA |
-  | | GPIO1_7 | UART0_RI_N	 |  I  | UART1_SIN	 |  I  | NA	     |	NA |
-  | +------------------------------------------------------------------------------+
-  |
-  |
-  +----------------------------------------------------------------------------*/
-
-void update_uart_ios(uart_config_nb_t uart_config, gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	switch (uart_config)
-	{
-	case L1:
-		/* ----------------------------------------------------------------------- */
-		/* L1 configuration:	UART0 = 8 pins */
-		/* ----------------------------------------------------------------------- */
-		/* Update GPIO Configuration Table */
-		gpio_tab[GPIO1][2].in_out = GPIO_IN;
-		gpio_tab[GPIO1][2].alt_nb = GPIO_ALT1;
-
-		gpio_tab[GPIO1][3].in_out = GPIO_IN;
-		gpio_tab[GPIO1][3].alt_nb = GPIO_ALT1;
-
-		gpio_tab[GPIO1][4].in_out = GPIO_IN;
-		gpio_tab[GPIO1][4].alt_nb = GPIO_ALT1;
-
-		gpio_tab[GPIO1][5].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][5].alt_nb = GPIO_ALT1;
-
-		gpio_tab[GPIO1][6].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][6].alt_nb = GPIO_ALT1;
-
-		gpio_tab[GPIO1][7].in_out = GPIO_IN;
-		gpio_tab[GPIO1][7].alt_nb = GPIO_ALT1;
-
-		break;
-
-	case L2:
-		/* ----------------------------------------------------------------------- */
-		/* L2 configuration:	UART0 = 4 pins */
-		/*			UART1 = 4 pins */
-		/* ----------------------------------------------------------------------- */
-		/* Update GPIO Configuration Table */
-		gpio_tab[GPIO1][2].in_out = GPIO_IN;
-		gpio_tab[GPIO1][2].alt_nb = GPIO_ALT2;
-
-		gpio_tab[GPIO1][3].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][3].alt_nb = GPIO_ALT2;
-
-		gpio_tab[GPIO1][4].in_out = GPIO_IN;
-		gpio_tab[GPIO1][4].alt_nb = GPIO_ALT1;
-
-		gpio_tab[GPIO1][5].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][5].alt_nb = GPIO_ALT1;
-
-		gpio_tab[GPIO1][6].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][6].alt_nb = GPIO_ALT2;
-
-		gpio_tab[GPIO1][7].in_out = GPIO_IN;
-		gpio_tab[GPIO1][7].alt_nb = GPIO_ALT2;
-
-		break;
-
-	case L3:
-		/* ----------------------------------------------------------------------- */
-		/* L3 configuration:	UART0 = 4 pins */
-		/*			UART1 = 2 pins */
-		/*			UART2 = 2 pins */
-		/* ----------------------------------------------------------------------- */
-		/* Update GPIO Configuration Table */
-		gpio_tab[GPIO1][2].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][2].alt_nb = GPIO_ALT3;
-
-		gpio_tab[GPIO1][3].in_out = GPIO_IN;
-		gpio_tab[GPIO1][3].alt_nb = GPIO_ALT3;
-
-		gpio_tab[GPIO1][4].in_out = GPIO_IN;
-		gpio_tab[GPIO1][4].alt_nb = GPIO_ALT1;
-
-		gpio_tab[GPIO1][5].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][5].alt_nb = GPIO_ALT1;
-
-		gpio_tab[GPIO1][6].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][6].alt_nb = GPIO_ALT2;
-
-		gpio_tab[GPIO1][7].in_out = GPIO_IN;
-		gpio_tab[GPIO1][7].alt_nb = GPIO_ALT2;
-
-		break;
-
-	case L4:
-		/* ----------------------------------------------------------------------- */
-		/* L4 configuration:	UART0 = 2 pins */
-		/*			UART1 = 2 pins */
-		/*			UART2 = 2 pins */
-		/*			UART3 = 2 pins */
-		/* ----------------------------------------------------------------------- */
-		/* Update GPIO Configuration Table */
-		gpio_tab[GPIO1][2].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][2].alt_nb = GPIO_ALT3;
-
-		gpio_tab[GPIO1][3].in_out = GPIO_IN;
-		gpio_tab[GPIO1][3].alt_nb = GPIO_ALT3;
-
-		gpio_tab[GPIO1][4].in_out = GPIO_IN;
-		gpio_tab[GPIO1][4].alt_nb = GPIO_ALT3;
-
-		gpio_tab[GPIO1][5].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][5].alt_nb = GPIO_ALT3;
-
-		gpio_tab[GPIO1][6].in_out = GPIO_OUT;
-		gpio_tab[GPIO1][6].alt_nb = GPIO_ALT2;
-
-		gpio_tab[GPIO1][7].in_out = GPIO_IN;
-		gpio_tab[GPIO1][7].alt_nb = GPIO_ALT2;
-
-		break;
-
-	default:
-		/* Unsupported UART configuration number */
-		printf("ERROR - Unsupported UART configuration number.\n\n");
-		for (;;)
-			;
-		break;
-
-	}
-
-	/* Set input Selection Register on Alt_Receive for UART Input Core */
-	out32(GPIO1_IS1L, (in32(GPIO1_IS1L) | 0x0FC30000));
-	out32(GPIO1_IS2L, (in32(GPIO1_IS2L) | 0x0C030000));
-	out32(GPIO1_IS3L, (in32(GPIO1_IS3L) | 0x03C00000));
-}
-
-/*----------------------------------------------------------------------------+
-  | update_ndfc_ios(void).
-  +----------------------------------------------------------------------------*/
-void update_ndfc_ios(gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	/* Update GPIO Configuration Table */
-	gpio_tab[GPIO0][6].in_out = GPIO_OUT;	    /* EBC_CS_N(1) */
-	gpio_tab[GPIO0][6].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][7].in_out = GPIO_OUT;	    /* EBC_CS_N(2) */
-	gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1;
-
-#if 0
-	gpio_tab[GPIO0][7].in_out = GPIO_OUT;	    /* EBC_CS_N(3) */
-	gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1;
-#endif
-}
-
-/*----------------------------------------------------------------------------+
-  | update_zii_ios(void).
-  +----------------------------------------------------------------------------*/
-void update_zii_ios(gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	/* Update GPIO Configuration Table */
-	gpio_tab[GPIO0][12].in_out = GPIO_IN;	    /* ZII_p0Rxd(0) */
-	gpio_tab[GPIO0][12].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][13].in_out = GPIO_IN;	    /* ZII_p0Rxd(1) */
-	gpio_tab[GPIO0][13].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][14].in_out = GPIO_IN;	    /* ZII_p0Rxd(2) */
-	gpio_tab[GPIO0][14].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][15].in_out = GPIO_IN;	    /* ZII_p0Rxd(3) */
-	gpio_tab[GPIO0][15].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][16].in_out = GPIO_OUT;	    /* ZII_p0Txd(0) */
-	gpio_tab[GPIO0][16].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][17].in_out = GPIO_OUT;	    /* ZII_p0Txd(1) */
-	gpio_tab[GPIO0][17].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][18].in_out = GPIO_OUT;	    /* ZII_p0Txd(2) */
-	gpio_tab[GPIO0][18].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][19].in_out = GPIO_OUT;	    /* ZII_p0Txd(3) */
-	gpio_tab[GPIO0][19].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][20].in_out = GPIO_IN;	    /* ZII_p0Rx_er */
-	gpio_tab[GPIO0][20].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][21].in_out = GPIO_IN;	    /* ZII_p0Rx_dv */
-	gpio_tab[GPIO0][21].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][22].in_out = GPIO_IN;	    /* ZII_p0Crs */
-	gpio_tab[GPIO0][22].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][23].in_out = GPIO_OUT;	    /* ZII_p0Tx_er */
-	gpio_tab[GPIO0][23].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][24].in_out = GPIO_OUT;	    /* ZII_p0Tx_en */
-	gpio_tab[GPIO0][24].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][25].in_out = GPIO_IN;	    /* ZII_p0Col */
-	gpio_tab[GPIO0][25].alt_nb = GPIO_ALT1;
-
-}
-
-/*----------------------------------------------------------------------------+
-  | update_uic_0_3_irq_ios().
-  +----------------------------------------------------------------------------*/
-void update_uic_0_3_irq_ios(gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	gpio_tab[GPIO1][8].in_out = GPIO_IN;	    /* UIC_IRQ(0) */
-	gpio_tab[GPIO1][8].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO1][9].in_out = GPIO_IN;	    /* UIC_IRQ(1) */
-	gpio_tab[GPIO1][9].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO1][10].in_out = GPIO_IN;	    /* UIC_IRQ(2) */
-	gpio_tab[GPIO1][10].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO1][11].in_out = GPIO_IN;	    /* UIC_IRQ(3) */
-	gpio_tab[GPIO1][11].alt_nb = GPIO_ALT1;
-}
-
-/*----------------------------------------------------------------------------+
-  | update_uic_4_9_irq_ios().
-  +----------------------------------------------------------------------------*/
-void update_uic_4_9_irq_ios(gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	gpio_tab[GPIO1][12].in_out = GPIO_IN;	    /* UIC_IRQ(4) */
-	gpio_tab[GPIO1][12].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO1][13].in_out = GPIO_IN;	    /* UIC_IRQ(6) */
-	gpio_tab[GPIO1][13].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO1][14].in_out = GPIO_IN;	    /* UIC_IRQ(7) */
-	gpio_tab[GPIO1][14].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO1][15].in_out = GPIO_IN;	    /* UIC_IRQ(8) */
-	gpio_tab[GPIO1][15].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO1][16].in_out = GPIO_IN;	    /* UIC_IRQ(9) */
-	gpio_tab[GPIO1][16].alt_nb = GPIO_ALT1;
-}
-
-/*----------------------------------------------------------------------------+
-  | update_dma_a_b_ios().
-  +----------------------------------------------------------------------------*/
-void update_dma_a_b_ios(gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	gpio_tab[GPIO1][12].in_out = GPIO_OUT;	    /* DMA_ACK(1) */
-	gpio_tab[GPIO1][12].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO1][13].in_out = GPIO_BI;	    /* DMA_EOT/TC(1) */
-	gpio_tab[GPIO1][13].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO1][14].in_out = GPIO_IN;	    /* DMA_REQ(0) */
-	gpio_tab[GPIO1][14].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO1][15].in_out = GPIO_OUT;	    /* DMA_ACK(0) */
-	gpio_tab[GPIO1][15].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO1][16].in_out = GPIO_BI;	    /* DMA_EOT/TC(0) */
-	gpio_tab[GPIO1][16].alt_nb = GPIO_ALT2;
-}
-
-/*----------------------------------------------------------------------------+
-  | update_dma_c_d_ios().
-  +----------------------------------------------------------------------------*/
-void update_dma_c_d_ios(gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	gpio_tab[GPIO0][0].in_out = GPIO_IN;	    /* DMA_REQ(2) */
-	gpio_tab[GPIO0][0].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO0][1].in_out = GPIO_OUT;	    /* DMA_ACK(2) */
-	gpio_tab[GPIO0][1].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO0][2].in_out = GPIO_BI;	    /* DMA_EOT/TC(2) */
-	gpio_tab[GPIO0][2].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO0][3].in_out = GPIO_IN;	    /* DMA_REQ(3) */
-	gpio_tab[GPIO0][3].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO0][4].in_out = GPIO_OUT;	    /* DMA_ACK(3) */
-	gpio_tab[GPIO0][4].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO0][5].in_out = GPIO_BI;	    /* DMA_EOT/TC(3) */
-	gpio_tab[GPIO0][5].alt_nb = GPIO_ALT2;
-
-}
-
-/*----------------------------------------------------------------------------+
-  | update_ebc_master_ios().
-  +----------------------------------------------------------------------------*/
-void update_ebc_master_ios(gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	gpio_tab[GPIO0][27].in_out = GPIO_IN;	    /* EXT_EBC_REQ */
-	gpio_tab[GPIO0][27].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][29].in_out = GPIO_OUT;	    /* EBC_EXT_HDLA */
-	gpio_tab[GPIO0][29].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][30].in_out = GPIO_OUT;	    /* EBC_EXT_ACK */
-	gpio_tab[GPIO0][30].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO0][31].in_out = GPIO_OUT;	    /* EBC_EXR_BUSREQ */
-	gpio_tab[GPIO0][31].alt_nb = GPIO_ALT1;
-}
-
-/*----------------------------------------------------------------------------+
-  | update_usb2_device_ios().
-  +----------------------------------------------------------------------------*/
-void update_usb2_device_ios(gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	gpio_tab[GPIO0][26].in_out = GPIO_IN;	    /* USB2D_RXVALID */
-	gpio_tab[GPIO0][26].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO0][27].in_out = GPIO_IN;	    /* USB2D_RXERROR */
-	gpio_tab[GPIO0][27].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO0][28].in_out = GPIO_OUT;	    /* USB2D_TXVALID */
-	gpio_tab[GPIO0][28].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO0][29].in_out = GPIO_OUT;	    /* USB2D_PAD_SUSPNDM */
-	gpio_tab[GPIO0][29].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO0][30].in_out = GPIO_OUT;	    /* USB2D_XCVRSELECT */
-	gpio_tab[GPIO0][30].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO0][31].in_out = GPIO_OUT;	    /* USB2D_TERMSELECT */
-	gpio_tab[GPIO0][31].alt_nb = GPIO_ALT2;
-
-	gpio_tab[GPIO1][0].in_out = GPIO_OUT;	    /* USB2D_OPMODE0 */
-	gpio_tab[GPIO1][0].alt_nb = GPIO_ALT1;
-
-	gpio_tab[GPIO1][1].in_out = GPIO_OUT;	    /* USB2D_OPMODE1 */
-	gpio_tab[GPIO1][1].alt_nb = GPIO_ALT1;
-
-}
-
-/*----------------------------------------------------------------------------+
-  | update_pci_patch_ios().
-  +----------------------------------------------------------------------------*/
-void update_pci_patch_ios(gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	gpio_tab[GPIO0][29].in_out = GPIO_OUT;	    /* EBC_EXT_HDLA */
-	gpio_tab[GPIO0][29].alt_nb = GPIO_ALT1;
-}
-
-/*----------------------------------------------------------------------------+
-  |   set_chip_gpio_configuration(unsigned char gpio_core,
-  |                               gpio_param_s (*gpio_tab)[GPIO_MAX])
-  |   Put the core impacted by clock modification and sharing in reset.
-  |   Config the select registers to resolve the sharing depending of the config.
-  |   Configure the GPIO registers.
-  |
-  +----------------------------------------------------------------------------*/
-void set_chip_gpio_configuration(unsigned char gpio_core, gpio_param_s (*gpio_tab)[GPIO_MAX])
-{
-	unsigned char i=0, j=0, reg_offset = 0;
-	unsigned long gpio_reg, gpio_core_add;
-
-	/* GPIO config of the GPIOs 0 to 31 */
-	for (i=0; i<GPIO_MAX; i++, j++)
-	{
-		if (i == GPIO_MAX/2)
-		{
-			reg_offset = 4;
-			j = i-16;
-		}
-
-		gpio_core_add = gpio_tab[gpio_core][i].add;
-
-		if ( (gpio_tab[gpio_core][i].in_out == GPIO_IN) ||
-		     (gpio_tab[gpio_core][i].in_out == GPIO_BI ))
-		{
-			switch (gpio_tab[gpio_core][i].alt_nb)
-			{
-			case GPIO_SEL:
-				break;
-
-			case GPIO_ALT1:
-				gpio_reg = in32(GPIO_IS1(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
-				gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2));
-				out32(GPIO_IS1(gpio_core_add+reg_offset), gpio_reg);
-				break;
-
-			case GPIO_ALT2:
-				gpio_reg = in32(GPIO_IS2(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
-				gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2));
-				out32(GPIO_IS2(gpio_core_add+reg_offset), gpio_reg);
-				break;
-
-			case GPIO_ALT3:
-				gpio_reg = in32(GPIO_IS3(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
-				gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2));
-				out32(GPIO_IS3(gpio_core_add+reg_offset), gpio_reg);
-				break;
-			}
-		}
-		if ( (gpio_tab[gpio_core][i].in_out == GPIO_OUT) ||
-		     (gpio_tab[gpio_core][i].in_out == GPIO_BI ))
-		{
-
-			switch (gpio_tab[gpio_core][i].alt_nb)
-			{
-			case GPIO_SEL:
-				break;
-			case GPIO_ALT1:
-				gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
-				gpio_reg = gpio_reg | (GPIO_ALT1_SEL >> (j*2));
-				out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg);
-				gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
-				gpio_reg = gpio_reg | (GPIO_ALT1_SEL >> (j*2));
-				out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg);
-				break;
-			case GPIO_ALT2:
-				gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
-				gpio_reg = gpio_reg | (GPIO_ALT2_SEL >> (j*2));
-				out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg);
-				gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
-				gpio_reg = gpio_reg | (GPIO_ALT2_SEL >> (j*2));
-				out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg);
-				break;
-			case GPIO_ALT3:
-				gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
-				gpio_reg = gpio_reg | (GPIO_ALT3_SEL >> (j*2));
-				out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg);
-				gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset)) & ~(GPIO_MASK >> (j*2));
-				gpio_reg = gpio_reg | (GPIO_ALT3_SEL >> (j*2));
-				out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg);
-				break;
-			}
-		}
-	}
-}
-
-/*----------------------------------------------------------------------------+
-  | force_bup_core_selection.
-  +----------------------------------------------------------------------------*/
-void force_bup_core_selection(core_selection_t *core_select_P, config_validity_t *config_val_P)
-{
-	/* Pointer invalid */
-	if (core_select_P == NULL)
-	{
-		printf("Configuration invalid pointer 1\n");
-		for (;;)
-			;
-	}
-
-	/* L4 Selection */
-	*(core_select_P+UART_CORE0)	       = CORE_SELECTED;
-	*(core_select_P+UART_CORE1)	       = CORE_SELECTED;
-	*(core_select_P+UART_CORE2)	       = CORE_SELECTED;
-	*(core_select_P+UART_CORE3)	       = CORE_SELECTED;
-
-	/* RMII Selection */
-	*(core_select_P+RMII_SEL)		= CORE_SELECTED;
-
-	/* External Interrupt 0-9 selection */
-	*(core_select_P+UIC_0_3)		= CORE_SELECTED;
-	*(core_select_P+UIC_4_9)		= CORE_SELECTED;
-
-	*(core_select_P+SCP_CORE)	        = CORE_SELECTED;
-	*(core_select_P+DMA_CHANNEL_CD)		= CORE_SELECTED;
-	*(core_select_P+PACKET_REJ_FUNC_AVAIL)	= CORE_SELECTED;
-	*(core_select_P+USB1_DEVICE)		= CORE_SELECTED;
-
-	if (is_nand_selected()) {
-		*(core_select_P+NAND_FLASH)	= CORE_SELECTED;
-	}
-
-	*config_val_P = CONFIG_IS_VALID;
-
-}
-
-/*----------------------------------------------------------------------------+
-  | configure_ppc440ep_pins.
-  +----------------------------------------------------------------------------*/
-void configure_ppc440ep_pins(void)
-{
-	uart_config_nb_t uart_configuration;
-	config_validity_t config_val = CONFIG_IS_INVALID;
-
-	/* Create Core Selection Table */
-	core_selection_t ppc440ep_core_selection[MAX_CORE_SELECT_NB] =
-		{
-			CORE_NOT_SELECTED,	/* IIC_CORE, */
-			CORE_NOT_SELECTED,	/* SPC_CORE, */
-			CORE_NOT_SELECTED,	/* DMA_CHANNEL_AB, */
-			CORE_NOT_SELECTED,	/* UIC_4_9, */
-			CORE_NOT_SELECTED,	/* USB2_HOST, */
-			CORE_NOT_SELECTED,	/* DMA_CHANNEL_CD, */
-			CORE_NOT_SELECTED,	/* USB2_DEVICE, */
-			CORE_NOT_SELECTED,	/* PACKET_REJ_FUNC_AVAIL, */
-			CORE_NOT_SELECTED,	/* USB1_DEVICE, */
-			CORE_NOT_SELECTED,	/* EBC_MASTER, */
-			CORE_NOT_SELECTED,	/* NAND_FLASH, */
-			CORE_NOT_SELECTED,	/* UART_CORE0, */
-			CORE_NOT_SELECTED,	/* UART_CORE1, */
-			CORE_NOT_SELECTED,	/* UART_CORE2, */
-			CORE_NOT_SELECTED,	/* UART_CORE3, */
-			CORE_NOT_SELECTED,	/* MII_SEL, */
-			CORE_NOT_SELECTED,	/* RMII_SEL, */
-			CORE_NOT_SELECTED,	/* SMII_SEL, */
-			CORE_NOT_SELECTED,	/* PACKET_REJ_FUNC_EN */
-			CORE_NOT_SELECTED,	/* UIC_0_3 */
-			CORE_NOT_SELECTED,	/* USB1_HOST */
-			CORE_NOT_SELECTED	/* PCI_PATCH */
-		};
-
-	gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX];
-
-	/* Table Default Initialisation + FPGA Access */
-	init_default_gpio(gpio_tab);
-	set_chip_gpio_configuration(GPIO0, gpio_tab);
-	set_chip_gpio_configuration(GPIO1, gpio_tab);
-
-	/* Update Table */
-	force_bup_core_selection(ppc440ep_core_selection, &config_val);
-#if 0 /* test-only */
-	/* If we are running PIBS 1, force known configuration */
-	update_core_selection_table(ppc440ep_core_selection, &config_val);
-#endif
-
-	/*----------------------------------------------------------------------------+
-	  | SDR + ios table update + fpga initialization
-	  +----------------------------------------------------------------------------*/
-	unsigned long sdr0_pfc1	    = 0;
-	unsigned long sdr0_usb0	    = 0;
-	unsigned long sdr0_mfr	    = 0;
-
-	/* PCI Always selected */
-
-	/* I2C Selection */
-	if (ppc440ep_core_selection[IIC_CORE] == CORE_SELECTED)
-	{
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL;
-		iic1_selection_in_fpga();
-	}
-
-	/* SCP Selection */
-	if (ppc440ep_core_selection[SCP_CORE] == CORE_SELECTED)
-	{
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL;
-		scp_selection_in_fpga();
-	}
-
-	/* UIC 0:3 Selection */
-	if (ppc440ep_core_selection[UIC_0_3] == CORE_SELECTED)
-	{
-		update_uic_0_3_irq_ios(gpio_tab);
-		dma_a_b_unselect_in_fpga();
-	}
-
-	/* UIC 4:9 Selection */
-	if (ppc440ep_core_selection[UIC_4_9] == CORE_SELECTED)
-	{
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_DIS_MASK) | SDR0_PFC1_DIS_UICIRQ5_SEL;
-		update_uic_4_9_irq_ios(gpio_tab);
-	}
-
-	/* DMA AB Selection */
-	if (ppc440ep_core_selection[DMA_CHANNEL_AB] == CORE_SELECTED)
-	{
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_DIS_MASK) | SDR0_PFC1_DIS_DMAR_SEL;
-		update_dma_a_b_ios(gpio_tab);
-		dma_a_b_selection_in_fpga();
-	}
-
-	/* DMA CD Selection */
-	if (ppc440ep_core_selection[DMA_CHANNEL_CD] == CORE_SELECTED)
-	{
-		update_dma_c_d_ios(gpio_tab);
-		dma_c_d_selection_in_fpga();
-	}
-
-	/* EBC Master Selection */
-	if (ppc440ep_core_selection[EBC_MASTER] == CORE_SELECTED)
-	{
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_ERE_MASK) | SDR0_PFC1_ERE_EXTR_SEL;
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_EBCHR_SEL;
-		update_ebc_master_ios(gpio_tab);
-	}
-
-	/* PCI Patch Enable */
-	if (ppc440ep_core_selection[PCI_PATCH] == CORE_SELECTED)
-	{
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_EBCHR_SEL;
-		update_pci_patch_ios(gpio_tab);
-	}
-
-	/* USB2 Host Selection - Not Implemented in PowerPC 440EP Pass1 */
-	if (ppc440ep_core_selection[USB2_HOST] == CORE_SELECTED)
-	{
-		/* Not Implemented in PowerPC 440EP Pass1-Pass2 */
-		printf("Invalid configuration => USB2 Host selected\n");
-		for (;;)
-			;
-		/*usb2_host_selection_in_fpga(); */
-	}
-
-	/* USB2.0 Device Selection */
-	if (ppc440ep_core_selection[USB2_DEVICE] == CORE_SELECTED)
-	{
-		update_usb2_device_ios(gpio_tab);
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_USB2D_SEL;
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UPR_MASK) | SDR0_PFC1_UPR_DISABLE;
-
-		mfsdr(SDR0_USB0, sdr0_usb0);
-		sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_USB_DEVSEL_MASK;
-		sdr0_usb0 = sdr0_usb0 | SDR0_USB0_USB20D_DEVSEL;
-		mtsdr(SDR0_USB0, sdr0_usb0);
-
-		usb2_device_selection_in_fpga();
-	}
-
-	/* USB1.1 Device Selection */
-	if (ppc440ep_core_selection[USB1_DEVICE] == CORE_SELECTED)
-	{
-		mfsdr(SDR0_USB0, sdr0_usb0);
-		sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_USB_DEVSEL_MASK;
-		sdr0_usb0 = sdr0_usb0 | SDR0_USB0_USB11D_DEVSEL;
-		mtsdr(SDR0_USB0, sdr0_usb0);
-	}
-
-	/* USB1.1 Host Selection */
-	if (ppc440ep_core_selection[USB1_HOST] == CORE_SELECTED)
-	{
-		mfsdr(SDR0_USB0, sdr0_usb0);
-		sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_LEEN_MASK;
-		sdr0_usb0 = sdr0_usb0 | SDR0_USB0_LEEN_ENABLE;
-		mtsdr(SDR0_USB0, sdr0_usb0);
-	}
-
-	/* NAND Flash Selection */
-	if (ppc440ep_core_selection[NAND_FLASH] == CORE_SELECTED)
-	{
-		update_ndfc_ios(gpio_tab);
-		mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_NDFC_SEL   |
-		      SDR0_CUST0_NDFC_ENABLE	|
-		      SDR0_CUST0_NDFC_BW_8_BIT	|
-		      SDR0_CUST0_NDFC_ARE_MASK	|
-		      SDR0_CUST0_CHIPSELGAT_EN1 |
-		      SDR0_CUST0_CHIPSELGAT_EN2);
-		ndfc_selection_in_fpga();
-	}
-	else
-	{
-		/* Set Mux on EMAC */
-		mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_EMAC_SEL);
-	}
-
-	/* MII Selection */
-	if (ppc440ep_core_selection[MII_SEL] == CORE_SELECTED)
-	{
-		update_zii_ios(gpio_tab);
-		mfsdr(SDR0_MFR, sdr0_mfr);
-		sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_MII;
-		mtsdr(SDR0_MFR, sdr0_mfr);
-
-		set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_MII);
-	}
-
-	/* RMII Selection */
-	if (ppc440ep_core_selection[RMII_SEL] == CORE_SELECTED)
-	{
-		update_zii_ios(gpio_tab);
-		mfsdr(SDR0_MFR, sdr0_mfr);
-		sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M;
-		mtsdr(SDR0_MFR, sdr0_mfr);
-
-		set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_RMII);
-	}
-
-	/* SMII Selection */
-	if (ppc440ep_core_selection[SMII_SEL] == CORE_SELECTED)
-	{
-		update_zii_ios(gpio_tab);
-		mfsdr(SDR0_MFR, sdr0_mfr);
-		sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_SMII;
-		mtsdr(SDR0_MFR, sdr0_mfr);
-
-		set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_SMII);
-	}
-
-	/* UART Selection */
-	uart_configuration = get_uart_configuration();
-	switch (uart_configuration)
-	{
-	case L1:	 /* L1 Selection */
-		/* UART0 8 pins Only */
-		/*sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_DSR_DTR; */
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) |SDR0_PFC1_U0ME_CTS_RTS;	  /* Chip Pb */
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_8PINS;
-		break;
-	case L2:	 /* L2 Selection */
-		/* UART0 and UART1 4 pins */
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR;
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS;
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR;
-		break;
-	case L3:	 /* L3 Selection */
-		/* UART0 4 pins, UART1 and UART2 2 pins */
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR;
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS;
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR;
-		break;
-	case L4:	 /* L4 Selection */
-		/* UART0, UART1, UART2 and UART3 2 pins */
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_DSR_DTR;
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS;
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR;
-		break;
-	}
-	update_uart_ios(uart_configuration, gpio_tab);
-
-	/* UART Selection in all cases */
-	uart_selection_in_fpga(uart_configuration);
-
-	/* Packet Reject Function Available */
-	if (ppc440ep_core_selection[PACKET_REJ_FUNC_AVAIL] == CORE_SELECTED)
-	{
-		/* Set UPR Bit in SDR0_PFC1 Register */
-		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UPR_MASK) | SDR0_PFC1_UPR_ENABLE;
-	}
-
-	/* Packet Reject Function Enable */
-	if (ppc440ep_core_selection[PACKET_REJ_FUNC_EN] == CORE_SELECTED)
-	{
-		mfsdr(SDR0_MFR, sdr0_mfr);
-		sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_PKT_REJ_MASK) | SDR0_MFR_PKT_REJ_EN;
-		mtsdr(SDR0_MFR, sdr0_mfr);
-	}
-
-	/* Perform effective access to hardware */
-	mtsdr(SDR0_PFC1, sdr0_pfc1);
-	set_chip_gpio_configuration(GPIO0, gpio_tab);
-	set_chip_gpio_configuration(GPIO1, gpio_tab);
-
-	/* USB2.0 Device Reset must be done after GPIO setting */
-	if (ppc440ep_core_selection[USB2_DEVICE] == CORE_SELECTED)
-		usb2_device_reset_through_fpga();
-
-}
diff --git a/board/amcc/bamboo/bamboo.h b/board/amcc/bamboo/bamboo.h
deleted file mode 100644
index 49f200a..0000000
--- a/board/amcc/bamboo/bamboo.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*----------------------------------------------------------------------------+
-  | FPGA registers and bit definitions
-  +----------------------------------------------------------------------------*/
-/*
- * PowerPC 440EP Board FPGA is reached with physical address 0x80001FF0.
- * TLB initialization makes it correspond to logical address 0x80001FF0.
- * => Done init_chip.s in bootlib
- */
-#define FPGA_BASE_ADDR	0x80002000
-
-/*----------------------------------------------------------------------------+
-  | Board Jumpers Setting Register
-  |   Board Settings provided by jumpers
-  +----------------------------------------------------------------------------*/
-#define FPGA_SETTING_REG	    (FPGA_BASE_ADDR+0x3)
-/* Boot from small flash */
-#define	    FPGA_SET_REG_BOOT_SMALL_FLASH	    0x80
-/* Operational Flash versus SRAM position in Memory Map */
-#define	    FPGA_SET_REG_OP_CODE_SRAM_SEL_MASK	    0x40
-#define	     FPGA_SET_REG_OP_CODE_FLASH_ABOVE	     0x40
-#define	     FPGA_SET_REG_SRAM_ABOVE		     0x00
-/* Boot From NAND Flash */
-#define	    FPGA_SET_REG_BOOT_NAND_FLASH_MASK	    0x40
-#define	    FPGA_SET_REG_BOOT_NAND_FLASH_SELECT	     0x00
-/* On Board PCI Arbiter Select */
-#define	    FPGA_SET_REG_PCI_EXT_ARBITER_SEL_MASK   0x10
-#define	    FPGA_SET_REG_PCI_EXT_ARBITER_SEL	    0x00
-
-/*----------------------------------------------------------------------------+
-  | Functions Selection Register 1
-  +----------------------------------------------------------------------------*/
-#define FPGA_SELECTION_1_REG	    (FPGA_BASE_ADDR+0x4)
-#define	    FPGA_SEL_1_REG_PHY_MASK	    0xE0
-#define	    FPGA_SEL_1_REG_MII		    0x80
-#define	    FPGA_SEL_1_REG_RMII		    0x40
-#define	    FPGA_SEL_1_REG_SMII		    0x20
-#define	    FPGA_SEL_1_REG_USB2_DEV_SEL	    0x10	   /* USB2 Device Selection */
-#define	    FPGA_SEL_1_REG_USB2_HOST_SEL    0x08	   /* USB2 Host Selection */
-#define	    FPGA_SEL_1_REG_NF_SELEC_MASK    0x07	   /* NF Selection Mask */
-#define	    FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1 0x04	   /* NF0 Selected by NF_CS1 */
-#define	    FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2 0x02	   /* NF1 Selected by NF_CS2 */
-#define	    FPGA_SEL_1_REG_NF1_SEL_BY_NFCS3 0x01	   /* NF1 Selected by NF_CS3 */
-
-/*----------------------------------------------------------------------------+
-  | Functions Selection Register 2
-  +----------------------------------------------------------------------------*/
-#define FPGA_SELECTION_2_REG	    (FPGA_BASE_ADDR+0x5)
-#define	    FPGA_SEL2_REG_IIC1_SCP_SEL_MASK 0x80	   /* IIC1 / SCP Selection */
-#define	    FPGA_SEL2_REG_SEL_FRAM	    0x80	   /* FRAM on IIC1 bus selected - SCP Select */
-#define	    FPGA_SEL2_REG_SEL_SCP	    0x80	   /* Identical to SCP Selection */
-#define	    FPGA_SEL2_REG_SEL_IIC1	    0x00	   /* IIC1 Selection - Default Value */
-#define	    FPGA_SEL2_REG_SEL_DMA_A_B	    0x40	   /* DMA A & B channels selected */
-#define	    FPGA_SEL2_REG_SEL_DMA_C_D	    0x20	   /* DMA C & D channels selected */
-#define	    FPGA_SEL2_REG_DMA_EOT_TC_3_SEL  0x10	   /* 0 = EOT - input to 440EP */
-							   /* 1 = TC - output from 440EP */
-#define	    FPGA_SEL2_REG_DMA_EOT_TC_2_SEL  0x08	   /* 0 = EOT (input to 440EP) */
-							   /* 1 = TC (output from 440EP) */
-#define	    FPGA_SEL2_REG_SEL_GPIO_1	    0x04	   /* EBC_GPIO & USB2_GPIO selected */
-#define	    FPGA_SEL2_REG_SEL_GPIO_2	    0x02	   /* Ether._GPIO & UART_GPIO selected */
-#define	    FPGA_SEL2_REG_SEL_GPIO_3	    0x01	   /* DMA_GPIO & Trace_GPIO selected */
-
-/*----------------------------------------------------------------------------+
-  | Functions Selection Register 3
-  +----------------------------------------------------------------------------*/
-#define FPGA_SELECTION_3_REG	    (FPGA_BASE_ADDR+0x6)
-#define	    FPGA_SEL3_REG_EXP_SLOT_EN		    0x80    /* Expansion Slot enabled */
-#define	    FPGA_SEL3_REG_SEL_UART_CONFIG_MASK	    0x70
-#define	    FPGA_SEL3_REG_SEL_UART_CONFIG1	    0x40    /* one 8_pin UART */
-#define	    FPGA_SEL3_REG_SEL_UART_CONFIG2	    0x20    /* two 4_pin UARTs */
-#define	    FPGA_SEL3_REG_SEL_UART_CONFIG3	    0x10    /* one 4_pin & two 2_pin UARTs */
-#define	    FPGA_SEL3_REG_SEL_UART_CONFIG4	    0x08    /* four 2_pin UARTs */
-#define	    FPGA_SEL3_REG_DTR_DSR_MODE_4_PIN_UART   0x00    /* DTR/DSR mode for 4_pin_UART */
-#define	    FPGA_SEL3_REG_RTS_CTS_MODE_4_PIN_UART   0x04    /* RTS/CTS mode for 4_pin_UART */
-
-/*----------------------------------------------------------------------------+
-  | Soft Reset Register
-  +----------------------------------------------------------------------------*/
-#define FPGA_RESET_REG		    (FPGA_BASE_ADDR+0x7)
-#define	    FPGA_RESET_REG_RESET_USB20_DEV	    0x80    /* Hard Reset of the GT3200 */
-#define	    FPGA_RESET_REG_RESET_DISPLAY	    0x40    /* Hard Reset on Display Device */
-#define	    FPGA_RESET_REG_STATUS_LED_0		    0x08    /* 1 = Led On */
-#define	    FPGA_RESET_REG_STATUS_LED_1		    0x04    /* 1 = Led On */
-#define	    FPGA_RESET_REG_STATUS_LED_2		    0x02    /* 1 = Led On */
-#define	    FPGA_RESET_REG_STATUS_LED_3		    0x01    /* 1 = Led On */
-
-
-/*----------------------------------------------------------------------------+
-| SDR Configuration registers
-+----------------------------------------------------------------------------*/
-#define	  SDR0_SDSTP1_EBC_ROM_BS_MASK  0x00006000  /* EBC Boot Size Mask */
-#define	  SDR0_SDSTP1_EBC_ROM_BS_32BIT 0x00004000    /* EBC 32 bits */
-#define	  SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00002000    /* EBC 16 Bits */
-#define	  SDR0_SDSTP1_EBC_ROM_BS_8BIT  0x00000000    /* EBC  8 Bits */
-
-#define	  SDR0_SDSTP1_BOOT_SEL_MASK    0x00001800   /* Boot device Selection Mask */
-#define	  SDR0_SDSTP1_BOOT_SEL_EBC     0x00000000     /* EBC */
-#define	  SDR0_SDSTP1_BOOT_SEL_PCI     0x00000800     /* PCI */
-#define	  SDR0_SDSTP1_BOOT_SEL_NDFC    0x00001000     /* NDFC */
-
-/* Serial Device Enabled - Addr = 0xA8 */
-#define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5
-/* Serial Device Enabled - Addr = 0xA4 */
-#define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7
-
-/* Pin Straps Reg */
-#define SDR0_PSTRP0		     0x0040
-#define SDR0_PSTRP0_BOOTSTRAP_MASK	0xE0000000  /* Strap Bits */
-
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000  /* Default strap settings 0 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000  /* Default strap settings 1 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000  /* Default strap settings 2 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000  /* Default strap settings 3 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000  /* Default strap settings 4 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000  /* Default strap settings 5 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000  /* Default strap settings 6 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000  /* Default strap settings 7 */
-
-/*----------------------------------------------------------------------------+
-| EBC Configuration Register - EBC0_CFG
-+----------------------------------------------------------------------------*/
-/* External Bus Three-State Control */
-#define EBC0_CFG_EBTC_DRIVEN	    0x80000000
-/* Device-Paced Time-out Disable */
-#define EBC0_CFG_PTD_ENABLED	    0x00000000
-/* Ready Timeout Count */
-#define EBC0_CFG_RTC_MASK	    0x38000000
-#define EBC0_CFG_RTC_16PERCLK	    0x00000000
-#define EBC0_CFG_RTC_32PERCLK	    0x08000000
-#define EBC0_CFG_RTC_64PERCLK	    0x10000000
-#define EBC0_CFG_RTC_128PERCLK	    0x18000000
-#define EBC0_CFG_RTC_256PERCLK	    0x20000000
-#define EBC0_CFG_RTC_512PERCLK	    0x28000000
-#define EBC0_CFG_RTC_1024PERCLK	    0x30000000
-#define EBC0_CFG_RTC_2048PERCLK	    0x38000000
-/* External Master Priority Low */
-#define EBC0_CFG_EMPL_LOW	    0x00000000
-#define EBC0_CFG_EMPL_MEDIUM_LOW    0x02000000
-#define EBC0_CFG_EMPL_MEDIUM_HIGH   0x04000000
-#define EBC0_CFG_EMPL_HIGH	    0x06000000
-/* External Master Priority High */
-#define EBC0_CFG_EMPH_LOW	    0x00000000
-#define EBC0_CFG_EMPH_MEDIUM_LOW    0x00800000
-#define EBC0_CFG_EMPH_MEDIUM_HIGH   0x01000000
-#define EBC0_CFG_EMPH_HIGH	    0x01800000
-/* Chip Select Three-State Control */
-#define EBC0_CFG_CSTC_DRIVEN	    0x00400000
-/* Burst Prefetch */
-#define EBC0_CFG_BPF_ONEDW	    0x00000000
-#define EBC0_CFG_BPF_TWODW	    0x00100000
-#define EBC0_CFG_BPF_FOURDW	    0x00200000
-/* External Master Size */
-#define EBC0_CFG_EMS_8BIT	    0x00000000
-/* Power Management Enable */
-#define EBC0_CFG_PME_DISABLED	    0x00000000
-#define EBC0_CFG_PME_ENABLED	    0x00020000
-/* Power Management Timer */
-#define EBC0_CFG_PMT_ENCODE(n)		((((unsigned long)(n))&0x1F)<<12)
-
-/*----------------------------------------------------------------------------+
-| Peripheral Bank Configuration Register - EBC0_BnCR
-+----------------------------------------------------------------------------*/
-/* BAS - Base Address Select */
-#define EBC0_BNCR_BAS_ENCODE(n)		((((unsigned long)(n))&0xFFF00000)<<0)
-/* BS - Bank Size */
-#define EBC0_BNCR_BS_MASK	0x000E0000
-#define EBC0_BNCR_BS_1MB	0x00000000
-#define EBC0_BNCR_BS_2MB	0x00020000
-#define EBC0_BNCR_BS_4MB	0x00040000
-#define EBC0_BNCR_BS_8MB	0x00060000
-#define EBC0_BNCR_BS_16MB	0x00080000
-#define EBC0_BNCR_BS_32MB	0x000A0000
-#define EBC0_BNCR_BS_64MB	0x000C0000
-#define EBC0_BNCR_BS_128MB	0x000E0000
-/* BU - Bank Usage */
-#define EBC0_BNCR_BU_MASK	0x00018000
-#define EBC0_BNCR_BU_RO		    0x00008000
-#define EBC0_BNCR_BU_WO		    0x00010000
-#define EBC0_BNCR_BU_RW		0x00018000
-/* BW - Bus Width */
-#define EBC0_BNCR_BW_MASK	0x00006000
-#define EBC0_BNCR_BW_8BIT	0x00000000
-#define EBC0_BNCR_BW_16BIT	0x00002000
-#define EBC0_BNCR_BW_32BIT	0x00004000
-
-/*----------------------------------------------------------------------------+
-| Peripheral Bank Access Parameters - EBC0_BnAP
-+----------------------------------------------------------------------------*/
-/* Burst Mode Enable */
-#define EBC0_BNAP_BME_ENABLED	    0x80000000
-#define EBC0_BNAP_BME_DISABLED	    0x00000000
-/* Transfert Wait */
-#define EBC0_BNAP_TWT_ENCODE(n)	    ((((unsigned long)(n))&0xFF)<<23)	/* Bits 1:8 */
-/* Chip Select On Timing */
-#define EBC0_BNAP_CSN_ENCODE(n)	    ((((unsigned long)(n))&0x3)<<18)	/* Bits 12:13 */
-/* Output Enable On Timing */
-#define EBC0_BNAP_OEN_ENCODE(n)	    ((((unsigned long)(n))&0x3)<<16)	/* Bits 14:15 */
-/* Write Back Enable On Timing */
-#define EBC0_BNAP_WBN_ENCODE(n)	    ((((unsigned long)(n))&0x3)<<14)	/* Bits 16:17 */
-/* Write Back Enable Off Timing */
-#define EBC0_BNAP_WBF_ENCODE(n)	    ((((unsigned long)(n))&0x3)<<12)	/* Bits 18:19 */
-/* Transfert Hold */
-#define EBC0_BNAP_TH_ENCODE(n)	    ((((unsigned long)(n))&0x7)<<9)	/* Bits 20:22 */
-/* PerReady Enable */
-#define EBC0_BNAP_RE_ENABLED	    0x00000100
-#define EBC0_BNAP_RE_DISABLED	    0x00000000
-/* Sample On Ready */
-#define EBC0_BNAP_SOR_DELAYED	    0x00000000
-#define EBC0_BNAP_SOR_NOT_DELAYED   0x00000080
-/* Byte Enable Mode */
-#define EBC0_BNAP_BEM_WRITEONLY	    0x00000000
-#define EBC0_BNAP_BEM_RW	    0x00000040
-/* Parity Enable */
-#define EBC0_BNAP_PEN_DISABLED	    0x00000000
-#define EBC0_BNAP_PEN_ENABLED	    0x00000020
-
-/*----------------------------------------------------------------------------+
-| Define Boot devices
-+----------------------------------------------------------------------------*/
-/* */
-#define BOOT_FROM_SMALL_FLASH		0x00
-#define BOOT_FROM_LARGE_FLASH_OR_SRAM	0x01
-#define BOOT_FROM_NAND_FLASH0		0x02
-#define BOOT_FROM_PCI			0x03
-#define BOOT_DEVICE_UNKNOWN		0x04
-
-
-#define	 PVR_POWERPC_440EP_PASS1    0x42221850
-#define	 PVR_POWERPC_440EP_PASS2    0x422218D3
-
-#define GPIO0		0
-#define GPIO1		1
-
-/*#define MAX_SELECTION_NB	CORE_NB */
-#define MAX_CORE_SELECT_NB	22
-
-/*----------------------------------------------------------------------------+
-  | PPC440EP GPIOs addresses.
-  +----------------------------------------------------------------------------*/
-#define GPIO0_REAL	 0xEF600B00
-
-#define GPIO1_REAL	 0xEF600C00
-
-/* Offsets */
-#define GPIOx_OR    0x00	/* GPIO Output Register */
-#define GPIOx_TCR   0x04	/* GPIO Three-State Control Register */
-#define GPIOx_OSL   0x08	/* GPIO Output Select Register (Bits 0-31) */
-#define GPIOx_OSH   0x0C	/* GPIO Ouput Select Register (Bits 32-63) */
-#define GPIOx_TSL   0x10	/* GPIO Three-State Select Register (Bits 0-31) */
-#define GPIOx_TSH   0x14	/* GPIO Three-State Select Register  (Bits 32-63) */
-#define GPIOx_ODR   0x18	/* GPIO Open drain Register */
-#define GPIOx_IR    0x1C	/* GPIO Input Register */
-#define GPIOx_RR1   0x20	/* GPIO Receive Register 1 */
-#define GPIOx_RR2   0x24	/* GPIO Receive Register 2 */
-#define GPIOx_RR3   0x28	/* GPIO Receive Register 3 */
-#define GPIOx_IS1L  0x30	/* GPIO Input Select Register 1 (Bits 0-31) */
-#define GPIOx_IS1H  0x34	/* GPIO Input Select Register 1 (Bits 32-63) */
-#define GPIOx_IS2L  0x38	/* GPIO Input Select Register 2 (Bits 0-31) */
-#define GPIOx_IS2H  0x3C	/* GPIO Input Select Register 2 (Bits 32-63) */
-#define GPIOx_IS3L  0x40	/* GPIO Input Select Register 3 (Bits 0-31) */
-#define GPIOx_IS3H  0x44	/* GPIO Input Select Register 3 (Bits 32-63) */
-
-/* GPIO0 */
-#define GPIO0_IS1L	(GPIO0_BASE+GPIOx_IS1L)
-#define GPIO0_IS1H	(GPIO0_BASE+GPIOx_IS1H)
-#define GPIO0_IS2L	(GPIO0_BASE+GPIOx_IS2L)
-#define GPIO0_IS2H	(GPIO0_BASE+GPIOx_IS2H)
-#define GPIO0_IS3L	(GPIO0_BASE+GPIOx_IS3L)
-#define GPIO0_IS3H	(GPIO0_BASE+GPIOx_IS3L)
-
-/* GPIO1 */
-#define GPIO1_IS1L	(GPIO1_BASE+GPIOx_IS1L)
-#define GPIO1_IS1H	(GPIO1_BASE+GPIOx_IS1H)
-#define GPIO1_IS2L	(GPIO1_BASE+GPIOx_IS2L)
-#define GPIO1_IS2H	(GPIO1_BASE+GPIOx_IS2H)
-#define GPIO1_IS3L	(GPIO1_BASE+GPIOx_IS3L)
-#define GPIO1_IS3H	(GPIO1_BASE+GPIOx_IS3L)
-
-#define GPIO_OS(x)	(x+GPIOx_OSL)	 /* GPIO Output Register High or Low */
-#define GPIO_TS(x)	(x+GPIOx_TSL)	 /* GPIO Three-state Control Reg High or Low */
-#define GPIO_IS1(x)	(x+GPIOx_IS1L)	 /* GPIO Input register1 High or Low */
-#define GPIO_IS2(x)	(x+GPIOx_IS2L)	 /* GPIO Input register2 High or Low */
-#define GPIO_IS3(x)	(x+GPIOx_IS3L)	 /* GPIO Input register3 High or Low */
-
-
-/*----------------------------------------------------------------------------+
-  |			XX     XX
-  |
-  | XXXXXX   XXX XX    XXX    XXX
-  |    XX    XX X XX	XX     XX
-  |   XX     XX X XX	XX     XX
-  |  XX	     XX	  XX	XX     XX
-  | XXXXXX   XXX  XXX  XXXX   XXXX
-  +----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-  | Defines
-  +----------------------------------------------------------------------------*/
-typedef enum zmii_config { ZMII_CONFIGURATION_UNKNOWN,
-			   ZMII_CONFIGURATION_IS_MII,
-			   ZMII_CONFIGURATION_IS_RMII,
-			   ZMII_CONFIGURATION_IS_SMII
-} zmii_config_t;
-
-/*----------------------------------------------------------------------------+
-  | Declare Configuration values
-  +----------------------------------------------------------------------------*/
-typedef enum uart_config_nb { L1, L2, L3, L4 } uart_config_nb_t;
-typedef enum core_selection { CORE_NOT_SELECTED, CORE_SELECTED} core_selection_t;
-typedef enum config_list {  IIC_CORE,
-			    SCP_CORE,
-			    DMA_CHANNEL_AB,
-			    UIC_4_9,
-			    USB2_HOST,
-			    DMA_CHANNEL_CD,
-			    USB2_DEVICE,
-			    PACKET_REJ_FUNC_AVAIL,
-			    USB1_DEVICE,
-			    EBC_MASTER,
-			    NAND_FLASH,
-			    UART_CORE0,
-			    UART_CORE1,
-			    UART_CORE2,
-			    UART_CORE3,
-			    MII_SEL,
-			    RMII_SEL,
-			    SMII_SEL,
-			    PACKET_REJ_FUNC_EN,
-			    UIC_0_3,
-			    USB1_HOST,
-			    PCI_PATCH,
-			    CORE_NB
-} core_list_t;
-
-typedef enum block3_value { B3_V1,  B3_V2,  B3_V3,  B3_V4,  B3_V5,
-			    B3_V6,  B3_V7,  B3_V8,  B3_V9,  B3_V10,
-			    B3_V11, B3_V12, B3_V13, B3_V14, B3_V15,
-			    B3_V16, B3_VALUE_UNKNOWN
-} block3_value_t;
-
-typedef enum config_validity { CONFIG_IS_VALID,
-			       CONFIG_IS_INVALID
-} config_validity_t;
diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk
deleted file mode 100644
index 9cb071e..0000000
--- a/board/amcc/bamboo/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2002-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c
deleted file mode 100644
index 6dbe09f..0000000
--- a/board/amcc/bamboo/flash.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * (C) Copyright 2004-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-#include <asm/ppc440.h>
-#include "bamboo.h"
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif				/* DEBUG */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
-
-/*
- * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
- */
-static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = {
-	{0x87800001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */
-	{0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66      */
-	{0x87800001, 0x00000000, 0x00000000}, /* 0:boot from nand flash  */
-	{0x87F00000, 0x87F80000, 0xFFC00001}, /* 3:boot from big flash 33*/
-	{0x87F00000, 0x87F80000, 0xFFC00001}, /* 4:boot from big flash 66*/
-	{0x00000000, 0x00000000, 0x00000000}, /* 5:boot from             */
-	{0x00000000, 0x00000000, 0x00000000}, /* 6:boot from pci 66      */
-	{0x00000000, 0x00000000, 0x00000000}, /* 7:boot from             */
-	{0x87C00001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */
-};
-
-/*
- * include common flash code (for amcc boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static int write_word(flash_info_t * info, ulong dest, ulong data);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
-	unsigned long total_b = 0;
-	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
-	unsigned short index = 0;
-	int i;
-	unsigned long val;
-	unsigned long ebc_boot_size;
-	unsigned long boot_selection;
-
-	mfsdr(SDR0_PINSTP, val);
-	index = (val & SDR0_PSTRP0_BOOTSTRAP_MASK) >> 29;
-
-	if ((index == 5) || (index == 7)) {
-		/*
-		 * Boot Settings in IIC EEprom address 0xA8 or 0xA4
-		 * Read Serial Device Strap Register1 in PPC440EP
-		 */
-		mfsdr(SDR0_SDSTP1, val);
-		boot_selection  = val & SDR0_SDSTP1_BOOT_SEL_MASK;
-		ebc_boot_size   = val & SDR0_SDSTP1_EBC_ROM_BS_MASK;
-
-		switch(boot_selection) {
-		case SDR0_SDSTP1_BOOT_SEL_EBC:
-			switch(ebc_boot_size) {
-			case SDR0_SDSTP1_EBC_ROM_BS_16BIT:
-				index = 3;
-				break;
-			case SDR0_SDSTP1_EBC_ROM_BS_8BIT:
-				index = 0;
-				break;
-			}
-			break;
-
-		case SDR0_SDSTP1_BOOT_SEL_PCI:
-			index = 1;
-			break;
-
-		case SDR0_SDSTP1_BOOT_SEL_NDFC:
-			index = 2;
-			break;
-		}
-	} else if (index == 0) {
-		if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE) {
-			index = 8; /* sram below op code flash -> new index 8 */
-		}
-	}
-
-	DEBUGF("\n");
-	DEBUGF("FLASH: Index: %d\n", index);
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		flash_info[i].sector_count = -1;
-		flash_info[i].size = 0;
-
-		/* check whether the address is 0 */
-		if (flash_addr_table[index][i] == 0)
-			continue;
-
-		DEBUGF("Detection bank %d...\n", i);
-		/* call flash_get_size() to initialize sector address */
-		size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
-				   &flash_info[i]);
-		flash_info[i].size = size_b[i];
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-			       i, size_b[i], size_b[i] << 20);
-			flash_info[i].sector_count = -1;
-			flash_info[i].size = 0;
-		}
-
-		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
-				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
-				    &flash_info[i]);
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
-				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[i]);
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR_REDUND)
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
-				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[i]);
-#endif
-#endif
-
-		total_b += flash_info[i].size;
-	}
-
-	return total_b;
-}
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
deleted file mode 100644
index 5c7c839..0000000
--- a/board/amcc/bamboo/init.S
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G)
-
-	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G)
-
-	/* PCI base & peripherals */
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_RWX | SA_W|SA_I)
-	tlbentry(CONFIG_SYS_NAND_ADDR, SZ_4K, CONFIG_SYS_NAND_ADDR, 0, AC_RWX | SA_W|SA_I)
-
-	/* PCI */
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_RW | SA_IG)
-
-	/* USB 2.0 Device */
-	tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_RW | SA_IG)
-
-	tlbtab_end
diff --git a/board/amcc/bubinga/Kconfig b/board/amcc/bubinga/Kconfig
deleted file mode 100644
index 540d9b6..0000000
--- a/board/amcc/bubinga/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_BUBINGA
-
-config SYS_BOARD
-	default "bubinga"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "bubinga"
-
-endif
diff --git a/board/amcc/bubinga/MAINTAINERS b/board/amcc/bubinga/MAINTAINERS
deleted file mode 100644
index 3299cc3..0000000
--- a/board/amcc/bubinga/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BUBINGA BOARD
-#M:	-
-S:	Maintained
-F:	board/amcc/bubinga/
-F:	include/configs/bubinga.h
-F:	configs/bubinga_defconfig
diff --git a/board/amcc/bubinga/Makefile b/board/amcc/bubinga/Makefile
deleted file mode 100644
index 0e7ebca..0000000
--- a/board/amcc/bubinga/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= bubinga.o flash.o
diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c
deleted file mode 100644
index c73424d..0000000
--- a/board/amcc/bubinga/bubinga.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * (C) Copyright 2000-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-long int spd_sdram(void);
-
-int board_early_init_f(void)
-{
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000010);
-	mtdcr(UIC0PR, 0xFFFF7FF0);	/* set int polarities */
-	mtdcr(UIC0TR, 0x00000010);	/* set int trigger levels */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	/*
-	 * Configure CPC0_PCI to enable PerWE as output
-	 * and enable the internal PCI arbiter if selected
-	 */
-	if (in_8((void *)FPGA_REG1) & FPGA_REG1_PCI_INT_ARB)
-		mtdcr(CPC0_PCI, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
-	else
-		mtdcr(CPC0_PCI, CPC0_PCI_HOST_CFG_EN);
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	puts("Board: Bubinga - AMCC PPC405EP Evaluation Board");
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-/* -------------------------------------------------------------------------
-  dram_init() reads EEPROM via I2c. EEPROM contains all of
-  the necessary info for SDRAM controller configuration
-   ------------------------------------------------------------------------- */
-int dram_init(void)
-{
-	gd->ram_size = spd_sdram();
-
-	return 0;
-}
diff --git a/board/amcc/bubinga/flash.c b/board/amcc/bubinga/flash.c
deleted file mode 100644
index a9d0ed8..0000000
--- a/board/amcc/bubinga/flash.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif				/* DEBUG */
-
-/*
- * include common flash code (for amcc boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-
-unsigned long flash_init(void)
-{
-	unsigned long size_b0, size_b1;
-	int i;
-	uint pbcr;
-	unsigned long base_b0, base_b1;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 =
-	    flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-		       size_b0, size_b0 << 20);
-	}
-
-	/* Only one bank */
-	if (CONFIG_SYS_MAX_FLASH_BANKS == 1) {
-		/* Setup offsets */
-		flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
-
-		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET,
-				    CONFIG_SYS_MONITOR_BASE,
-				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
-				    &flash_info[0]);
-#ifdef CONFIG_ENV_IS_IN_FLASH
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
-				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[0]);
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
-				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[0]);
-#endif
-
-		size_b1 = 0;
-		flash_info[0].size = size_b0;
-	}
-
-	/* 2 banks */
-	else {
-		size_b1 =
-		    flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
-				   &flash_info[1]);
-
-		/* Re-do sizing to get full correct info */
-
-		if (size_b1) {
-			mtdcr(EBC0_CFGADDR, PB0CR);
-			pbcr = mfdcr(EBC0_CFGDATA);
-			mtdcr(EBC0_CFGADDR, PB0CR);
-			base_b1 = -size_b1;
-			pbcr = (pbcr & 0x0001ffff) | base_b1 |
-			    (((size_b1 / 1024 / 1024) - 1) << 17);
-			mtdcr(EBC0_CFGDATA, pbcr);
-			/*          printf("PB1CR = %x\n", pbcr); */
-		}
-
-		if (size_b0) {
-			mtdcr(EBC0_CFGADDR, PB1CR);
-			pbcr = mfdcr(EBC0_CFGDATA);
-			mtdcr(EBC0_CFGADDR, PB1CR);
-			base_b0 = base_b1 - size_b0;
-			pbcr = (pbcr & 0x0001ffff) | base_b0 |
-			    (((size_b0 / 1024 / 1024) - 1) << 17);
-			mtdcr(EBC0_CFGDATA, pbcr);
-			/*            printf("PB0CR = %x\n", pbcr); */
-		}
-
-		size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
-
-		flash_get_offsets(base_b0, &flash_info[0]);
-
-		/* monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET,
-				    base_b0 + size_b0 - CONFIG_SYS_MONITOR_LEN,
-				    base_b0 + size_b0 - 1, &flash_info[0]);
-		/* Also protect sector containing initial power-up instruction */
-		/* (flash_protect() checks address range - other call ignored) */
-		(void)flash_protect(FLAG_PROTECT_SET,
-				    0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
-		(void)flash_protect(FLAG_PROTECT_SET,
-				    0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]);
-
-		if (size_b1) {
-			/* Re-do sizing to get full correct info */
-			size_b1 =
-			    flash_get_size((vu_long *) base_b1, &flash_info[1]);
-
-			flash_get_offsets(base_b1, &flash_info[1]);
-
-			/* monitor protection ON by default */
-			(void)flash_protect(FLAG_PROTECT_SET,
-					    base_b1 + size_b1 - CONFIG_SYS_MONITOR_LEN,
-					    base_b1 + size_b1 - 1,
-					    &flash_info[1]);
-			/* monitor protection OFF by default (one is enough) */
-			(void)flash_protect(FLAG_PROTECT_CLEAR,
-					    base_b0 + size_b0 - CONFIG_SYS_MONITOR_LEN,
-					    base_b0 + size_b0 - 1,
-					    &flash_info[0]);
-		} else {
-			flash_info[1].flash_id = FLASH_UNKNOWN;
-			flash_info[1].sector_count = -1;
-		}
-
-		flash_info[0].size = size_b0;
-		flash_info[1].size = size_b1;
-	}			/* else 2 banks */
-	return (size_b0 + size_b1);
-}
-
-static void flash_get_offsets(ulong base, flash_info_t * info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id == FLASH_AM040)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] =
-				    base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type           */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-}
diff --git a/board/amcc/canyonlands/Kconfig b/board/amcc/canyonlands/Kconfig
deleted file mode 100644
index cea6009..0000000
--- a/board/amcc/canyonlands/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-if TARGET_CANYONLANDS
-
-config SYS_BOARD
-	default "canyonlands"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "canyonlands"
-
-choice BOARD_TYPE
-	prompt "Select which board to build for"
-	optional
-
-config CANYONLANDS
-	bool "Glacier"
-	help
-	  Select this to build for the Canyonlands 460EX board.
-
-config GLACIER
-	bool "Glacier"
-	help
-	  Select this to build for the Glacier 460GT board.
-
-config ARCHES
-	bool "Arches"
-	help
-	  Select this to build for the Arches dual 460GT board.
-
-endchoice
-
-endif
diff --git a/board/amcc/canyonlands/MAINTAINERS b/board/amcc/canyonlands/MAINTAINERS
deleted file mode 100644
index 8be8a52..0000000
--- a/board/amcc/canyonlands/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-CANYONLANDS BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/canyonlands/
-F:	include/configs/canyonlands.h
-F:	configs/arches_defconfig
-F:	configs/canyonlands_defconfig
-F:	configs/glacier_defconfig
-F:	configs/glacier_ramboot_defconfig
diff --git a/board/amcc/canyonlands/Makefile b/board/amcc/canyonlands/Makefile
deleted file mode 100644
index ba0765f..0000000
--- a/board/amcc/canyonlands/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2008
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= canyonlands.o
-obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
-extra-y	+= init.o
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
deleted file mode 100644
index 6ea004c..0000000
--- a/board/amcc/canyonlands/canyonlands.c
+++ /dev/null
@@ -1,517 +0,0 @@
-/*
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc440.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <i2c.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/4xx_pcie.h>
-#include <asm/ppc4xx-gpio.h>
-#include <linux/errno.h>
-#include <usb.h>
-
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct board_bcsr {
-	u8	board_id;
-	u8	cpld_rev;
-	u8	led_user;
-	u8	board_status;
-	u8	reset_ctrl;
-	u8	flash_ctrl;
-	u8	eth_ctrl;
-	u8	usb_ctrl;
-	u8	irq_ctrl;
-};
-
-#define BOARD_CANYONLANDS_PCIE	1
-#define BOARD_CANYONLANDS_SATA	2
-#define BOARD_GLACIER		3
-#define BOARD_ARCHES		4
-
-/*
- * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
- * board specific values.
- */
-#if defined(CONFIG_ARCHES)
-u32 ddr_wrdtr(u32 default_val) {
-	return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_0_DEG | 0x823);
-}
-#else
-u32 ddr_wrdtr(u32 default_val) {
-	return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823);
-}
-
-u32 ddr_clktr(u32 default_val) {
-	return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
-}
-#endif
-
-#if defined(CONFIG_ARCHES)
-/*
- * FPGA read/write helper macros
- */
-static inline int board_fpga_read(int offset)
-{
-	return in_8((void *)(CONFIG_SYS_FPGA_BASE + offset));
-}
-
-static inline void board_fpga_write(int offset, int data)
-{
-	out_8((void *)(CONFIG_SYS_FPGA_BASE + offset), data);
-}
-
-/*
- * CPLD read/write helper macros
- */
-static inline int board_cpld_read(int offset)
-{
-	int data;
-
-	out_8((void *)(CONFIG_SYS_CPLD_ADDR), offset);
-	data = in_8((void *)(CONFIG_SYS_CPLD_DATA));
-
-	return data;
-}
-
-static inline void board_cpld_write(int offset, int data)
-{
-	out_8((void *)(CONFIG_SYS_CPLD_ADDR), offset);
-	out_8((void *)(CONFIG_SYS_CPLD_DATA), data);
-}
-#else
-static int pvr_460ex(void)
-{
-	u32 pvr = get_pvr();
-
-	if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA) ||
-	    (pvr == PVR_460EX_RB))
-		return 1;
-
-	return 0;
-}
-#endif	/* defined(CONFIG_ARCHES) */
-
-int board_early_init_f(void)
-{
-#if !defined(CONFIG_ARCHES)
-	u32 sdr0_cust0;
-	struct board_bcsr *bcsr_data =
-		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
-
-#endif
-
-	/*
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000005);	/* ATI & UIC1 crit are critical */
-	mtdcr(UIC0PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC0TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC0VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC1TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC2ER, 0x00000000);	/* disable all */
-	mtdcr(UIC2CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC2PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC2TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC2VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC3ER, 0x00000000);	/* disable all */
-	mtdcr(UIC3CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC3PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC3TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC3VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
-
-#if !defined(CONFIG_ARCHES)
-	/* SDR Setting - enable NDFC */
-	mfsdr(SDR0_CUST0, sdr0_cust0);
-	sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL	|
-		SDR0_CUST0_NDFC_ENABLE		|
-		SDR0_CUST0_NDFC_BW_8_BIT	|
-		SDR0_CUST0_NDFC_ARE_MASK	|
-		SDR0_CUST0_NDFC_BAC_ENCODE(3)	|
-		(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
-	mtsdr(SDR0_CUST0, sdr0_cust0);
-#endif
-
-	/*
-	 * Configure PFC (Pin Function Control) registers
-	 * UART0: 4 pins
-	 */
-	mtsdr(SDR0_PFC1, 0x00040000);
-
-	/* Enable PCI host functionality in SDR0_PCI0 */
-	mtsdr(SDR0_PCI0, 0xe0000000);
-
-#if !defined(CONFIG_ARCHES)
-	/* Enable ethernet and take out of reset */
-	out_8(&bcsr_data->eth_ctrl, 0) ;
-
-	/* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */
-	out_8(&bcsr_data->flash_ctrl, 0) ;
-	mtsdr(SDR0_SRST1, 0);	/* Pull AHB out of reset default=1 */
-
-	/* Setup PLB4-AHB bridge based on the system address map */
-	mtdcr(AHB_TOP, 0x8000004B);
-	mtdcr(AHB_BOT, 0x8000004B);
-
-#endif
-
-	return 0;
-}
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
-int board_usb_init(int index, enum usb_init_type init)
-{
-	struct board_bcsr *bcsr_data =
-		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
-	u8 val;
-
-	/* Enable USB host & USB-OTG */
-	val = in_8(&bcsr_data->usb_ctrl);
-	val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
-	out_8(&bcsr_data->usb_ctrl, val);
-
-	/*
-	 * Configure USB-STP pins as alternate and not GPIO
-	 * It seems to be neccessary to configure the STP pins as GPIO
-	 * input at powerup (perhaps while USB reset is asserted). So
-	 * we configure those pins to their "real" function now.
-	 */
-	gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
-	gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
-
-	return 0;
-}
-
-int usb_board_stop(void)
-{
-	struct board_bcsr *bcsr_data =
-		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
-	u8 val;
-
-	/* Disable USB host & USB-OTG */
-	val = in_8(&bcsr_data->usb_ctrl);
-	val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
-	out_8(&bcsr_data->usb_ctrl, val);
-
-	/* Reconfigure USB-STP pins as input */
-	gpio_config(16, GPIO_IN , GPIO_SEL, GPIO_OUT_0);
-	gpio_config(19, GPIO_IN , GPIO_SEL, GPIO_OUT_0);
-
-	return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	return usb_board_stop();
-}
-#endif /* CONFIG_USB_OHCI_NEW && CONFIG_SYS_USB_OHCI_BOARD_INIT */
-
-#if !defined(CONFIG_ARCHES)
-static void canyonlands_sata_init(int board_type)
-{
-	u32 reg;
-
-	if (board_type == BOARD_CANYONLANDS_SATA) {
-		/* Put SATA in reset */
-		SDR_WRITE(SDR0_SRST1, 0x00020001);
-
-		/* Set the phy for SATA, not PCI-E port 0 */
-		reg = SDR_READ(PESDR0_PHY_CTL_RST);
-		SDR_WRITE(PESDR0_PHY_CTL_RST, (reg & 0xeffffffc) | 0x00000001);
-		reg = SDR_READ(PESDR0_L0CLK);
-		SDR_WRITE(PESDR0_L0CLK, (reg & 0xfffffff8) | 0x00000007);
-		SDR_WRITE(PESDR0_L0CDRCTL, 0x00003111);
-		SDR_WRITE(PESDR0_L0DRV, 0x00000104);
-
-		/* Bring SATA out of reset */
-		SDR_WRITE(SDR0_SRST1, 0x00000000);
-	}
-}
-#endif	/* !defined(CONFIG_ARCHES) */
-
-int get_cpu_num(void)
-{
-	int cpu = NA_OR_UNKNOWN_CPU;
-
-#if defined(CONFIG_ARCHES)
-	int cpu_num;
-
-	cpu_num = board_fpga_read(0x3);
-
-	/* sanity check; assume cpu numbering starts and increments from 0 */
-	if ((cpu_num >= 0) && (cpu_num < CONFIG_BD_NUM_CPUS))
-		cpu = cpu_num;
-#endif
-
-	return cpu;
-}
-
-#if !defined(CONFIG_ARCHES)
-int checkboard(void)
-{
-	struct board_bcsr *bcsr_data =
-		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	if (pvr_460ex()) {
-		printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
-		if (in_8(&bcsr_data->board_status) & BCSR_SELECT_PCIE)
-			gd->board_type = BOARD_CANYONLANDS_PCIE;
-		else
-			gd->board_type = BOARD_CANYONLANDS_SATA;
-	} else {
-		printf("Board: Glacier - AMCC PPC460GT Evaluation Board");
-		gd->board_type = BOARD_GLACIER;
-	}
-
-	switch (gd->board_type) {
-	case BOARD_CANYONLANDS_PCIE:
-	case BOARD_GLACIER:
-		puts(", 2*PCIe");
-		break;
-
-	case BOARD_CANYONLANDS_SATA:
-		puts(", 1*PCIe/1*SATA");
-		break;
-	}
-
-	printf(", Rev. %X", in_8(&bcsr_data->cpld_rev));
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	canyonlands_sata_init(gd->board_type);
-
-	return (0);
-}
-
-#else	/* defined(CONFIG_ARCHES) */
-
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-	printf("Board: Arches - AMCC DUAL PPC460GT Reference Design\n");
-	printf("       Revision %02x.%02x ",
-				board_fpga_read(0x0), board_fpga_read(0x1));
-
-	gd->board_type = BOARD_ARCHES;
-
-	/* Only CPU0 has access to CPLD registers */
-	if (get_cpu_num() == 0) {
-		u8 cfg_sw = board_cpld_read(0x1);
-		printf("(FPGA=%02x, CPLD=%02x)\n",
-				board_fpga_read(0x2), board_cpld_read(0x0));
-		printf("       Configuration Switch %d%d%d%d\n",
-				((cfg_sw >> 3) & 0x01),
-				((cfg_sw >> 2) & 0x01),
-				((cfg_sw >> 1) & 0x01),
-				((cfg_sw >> 0) & 0x01));
-	} else
-		printf("(FPGA=%02x, CPLD=xx)\n", board_fpga_read(0x2));
-
-
-	if (s != NULL)
-		printf("       Serial# %s\n", s);
-
-	return 0;
-}
-#endif	/* !defined(CONFIG_ARCHES) */
-
-#if defined(CONFIG_PCI)
-int board_pcie_first(void)
-{
-	/*
-	 * Canyonlands with SATA enabled has only one PCIe slot
-	 * (2nd one).
-	 */
-	if (gd->board_type == BOARD_CANYONLANDS_SATA)
-		return 1;
-
-	return 0;
-}
-#endif /* CONFIG_PCI */
-
-int board_early_init_r (void)
-{
-	/*
-	 * Canyonlands has 64MBytes of NOR FLASH (Spansion 29GL512), but the
-	 * boot EBC mapping only supports a maximum of 16MBytes
-	 * (4.ff00.0000 - 4.ffff.ffff).
-	 * To solve this problem, the FLASH has to get remapped to another
-	 * EBC address which accepts bigger regions:
-	 *
-	 * 0xfc00.0000 -> 4.cc00.0000
-	 */
-
-	/* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */
-	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
-
-	/* Remove TLB entry of boot EBC mapping */
-	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
-
-	/* Add TLB entry for 0xfc00.0000 -> 0x4.cc00.0000 */
-	program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE,
-		    TLB_WORD2_I_ENABLE);
-
-	/*
-	 * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
-	 * 0xfc00.0000 is possible
-	 */
-
-	/*
-	 * Clear potential errors resulting from auto-calibration.
-	 * If not done, then we could get an interrupt later on when
-	 * exceptions are enabled.
-	 */
-	set_mcsr(get_mcsr());
-
-	return 0;
-}
-
-#if !defined(CONFIG_ARCHES)
-int misc_init_r(void)
-{
-	u32 sdr0_srst1 = 0;
-	u32 eth_cfg;
-	u8 val;
-
-	/*
-	 * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
-	 * This is board specific, so let's do it here.
-	 */
-	mfsdr(SDR0_ETH_CFG, eth_cfg);
-	/* disable SGMII mode */
-	eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
-		     SDR0_ETH_CFG_SGMII1_ENABLE |
-		     SDR0_ETH_CFG_SGMII0_ENABLE);
-	/* Set the for 2 RGMII mode */
-	/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
-	eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
-	if (pvr_460ex())
-		eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
-	else
-		eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
-	mtsdr(SDR0_ETH_CFG, eth_cfg);
-
-	/*
-	 * The AHB Bridge core is held in reset after power-on or reset
-	 * so enable it now
-	 */
-	mfsdr(SDR0_SRST1, sdr0_srst1);
-	sdr0_srst1 &= ~SDR0_SRST1_AHB;
-	mtsdr(SDR0_SRST1, sdr0_srst1);
-
-	/*
-	 * RTC/M41T62:
-	 * Disable square wave output: Batterie will be drained
-	 * quickly, when this output is not disabled
-	 */
-	val = i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, 0xa);
-	val &= ~0x40;
-	i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0xa, val);
-
-	return 0;
-}
-
-#else	/* defined(CONFIG_ARCHES) */
-
-int misc_init_r(void)
-{
-	u32 eth_cfg = 0;
-	u32 eth_pll;
-	u32 reg;
-
-	/*
-	 * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
-	 * This is board specific, so let's do it here.
-	 */
-
-	/* enable SGMII mode */
-	eth_cfg |= (SDR0_ETH_CFG_SGMII0_ENABLE |
-			SDR0_ETH_CFG_SGMII1_ENABLE |
-			SDR0_ETH_CFG_SGMII2_ENABLE);
-
-	/* Set EMAC for MDIO */
-	eth_cfg |= SDR0_ETH_CFG_MDIO_SEL_EMAC0;
-
-	/* bypass the TAHOE0/TAHOE1 cores for U-Boot */
-	eth_cfg |= (SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS);
-
-	mtsdr(SDR0_ETH_CFG, eth_cfg);
-
-	/* reset all SGMII interfaces */
-	mfsdr(SDR0_SRST1,   reg);
-	reg |= (SDR0_SRST1_SGMII0 | SDR0_SRST1_SGMII1 | SDR0_SRST1_SGMII2);
-	mtsdr(SDR0_SRST1, reg);
-	mtsdr(SDR0_ETH_STS, 0xFFFFFFFF);
-	mtsdr(SDR0_SRST1,   0x00000000);
-
-	do {
-		mfsdr(SDR0_ETH_PLL, eth_pll);
-	} while (!(eth_pll & SDR0_ETH_PLL_PLLLOCK));
-
-	return 0;
-}
-#endif	/* !defined(CONFIG_ARCHES) */
-
-#ifdef CONFIG_OF_BOARD_SETUP
-extern int __ft_board_setup(void *blob, bd_t *bd);
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	__ft_board_setup(blob, bd);
-
-	if (gd->board_type == BOARD_CANYONLANDS_SATA) {
-		/*
-		 * When SATA is selected we need to disable the first PCIe
-		 * node in the device tree, so that Linux doesn't initialize
-		 * it.
-		 */
-		fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
-				     "disabled", sizeof("disabled"), 1);
-	}
-
-	if (gd->board_type == BOARD_CANYONLANDS_PCIE) {
-		/*
-		 * When PCIe is selected we need to disable the SATA
-		 * node in the device tree, so that Linux doesn't initialize
-		 * it.
-		 */
-		fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
-				     "disabled", sizeof("disabled"), 1);
-	}
-
-	return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/amcc/canyonlands/chip_config.c b/board/amcc/canyonlands/chip_config.c
deleted file mode 100644
index e485570..0000000
--- a/board/amcc/canyonlands/chip_config.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx_config.h>
-
-struct ppc4xx_config ppc4xx_config_val[] = {
-	{
-		"600-nor", "NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"800-nor", "NOR  CPU: 800 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"1000-nor", "NOR  CPU:1000 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"1066-nor", "NOR  CPU:1066 PLB: 266 OPB:  88 EBC:  88",
-		{
-			0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-#if !defined(CONFIG_ARCHES)
-	{
-		"600-nand", "NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x80, 0xce, 0x1f, 0x79, 0x90, 0x01, 0xa0,
-			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"800-nand", "NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x80, 0xba, 0x14, 0x99, 0x90, 0x01, 0xa0,
-			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"1000-nand", "NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x82, 0x96, 0x19, 0xb9, 0x90, 0x01, 0xa0,
-			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"1066-nand", "NAND CPU:1066 PLB: 266 OPB:  88 EBC:  88",
-		{
-			0x86, 0x80, 0xb3, 0x01, 0x9d, 0x90, 0x01, 0xa0,
-			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-#endif
-};
-
-int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk
deleted file mode 100644
index 5cc90d2..0000000
--- a/board/amcc/canyonlands/config.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# (C) Copyright 2008-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-#
-# AMCC 460EX/460GT Evaluation Board (Canyonlands) board
-#
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S
deleted file mode 100644
index bf00bd6..0000000
--- a/board/amcc/canyonlands/init.S
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
-	 * use the speed up boot process. It is patched after relocation to
-	 * enable SA_I
-	 */
-	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_RWX | SA_G) /* TLB 0 */
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
-	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G)
-#endif
-
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_RW | SA_IG)
-
-	/* PCIe UTL register */
-	tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_RW | SA_IG)
-
-#if !defined(CONFIG_ARCHES)
-	/* TLB-entry for NAND */
-	tlbentry(CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 4, AC_RWX | SA_IG)
-
-	/* TLB-entry for CPLD */
-	tlbentry(CONFIG_SYS_BCSR_BASE, SZ_1K, CONFIG_SYS_BCSR_BASE, 4, AC_RW | SA_IG)
-#else
-	/* TLB-entry for FPGA */
-	tlbentry(CONFIG_SYS_FPGA_BASE, SZ_16M, CONFIG_SYS_FPGA_BASE, 4, AC_RW | SA_IG)
-#endif
-
-	/* TLB-entry for OCM */
-	tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4, AC_RWX | SA_I)
-
-	/* TLB-entry for Local Configuration registers => peripherals */
-	tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_RWX | SA_IG)
-
-	/* AHB: Internal USB Peripherals (USB, SATA) */
-	tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_RWX | SA_IG)
-
-#if defined(CONFIG_RAPIDIO)
-	/* TLB-entries for RapidIO (SRIO) */
-	tlbentry(CONFIG_SYS_SRGPL0_REG_BAR, SZ_16M, CONFIG_SYS_SRGPL0_REG_BAR,
-					0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_SRGPL0_CFG_BAR, SZ_16M, CONFIG_SYS_SRGPL0_CFG_BAR,
-					0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_SRGPL0_MNT_BAR, SZ_16M, CONFIG_SYS_SRGPL0_MNT_BAR,
-					0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_I2ODMA_BASE, SZ_1K,  0x00100000,
-					0x4, AC_RW | SA_IG)
-#endif
-
-	tlbtab_end
diff --git a/board/amcc/canyonlands/u-boot-ram.lds b/board/amcc/canyonlands/u-boot-ram.lds
deleted file mode 100644
index 1750c74..0000000
--- a/board/amcc/canyonlands/u-boot-ram.lds
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    _image_copy_start = .;
-    arch/powerpc/cpu/ppc4xx/start.o	(.text*)
-    board/amcc/canyonlands/init.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    KEEP(*(.got))
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : {
-	*(.data.init)
-	. = ALIGN(256);
-	LONG(0) LONG(0)		/* Extend u-boot.bin to here */
-  }
-  __init_end = .;
-  _end = .;
-  _image_binary_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
deleted file mode 100644
index 4b2300b..0000000
--- a/board/amcc/common/flash.c
+++ /dev/null
@@ -1,934 +0,0 @@
-/*
- * (C) Copyright 2004-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word(flash_info_t * info, ulong dest, ulong data);
-#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-static int write_word_1(flash_info_t * info, ulong dest, ulong data);
-static int write_word_2(flash_info_t * info, ulong dest, ulong data);
-static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
-static int flash_erase_2(flash_info_t * info, int s_first, int s_last);
-static ulong flash_get_size_1(vu_long * addr, flash_info_t * info);
-static ulong flash_get_size_2(vu_long * addr, flash_info_t * info);
-#endif
-
-void flash_print_info(flash_info_t * info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("AMD ");
-		break;
-	case FLASH_MAN_STM:
-		printf("STM ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf("FUJITSU ");
-		break;
-	case FLASH_MAN_SST:
-		printf("SST ");
-		break;
-	case FLASH_MAN_MX:
-		printf ("MACRONIX ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:
-		printf("AM29F040 (512 Kbit, uniform sector size)\n");
-		break;
-	case FLASH_AM400B:
-		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:
-		printf("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:
-		printf("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AMD016:
-		printf("AM29F016D (16 Mbit, uniform sector size)\n");
-		break;
-	case FLASH_AM160B:
-		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:
-		printf("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:
-		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:
-		printf("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM033C:
-		printf("AM29LV033C (32 Mbit, top boot sector)\n");
-		break;
-	case FLASH_SST800A:
-		printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
-		break;
-	case FLASH_SST160A:
-		printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
-		break;
-	case FLASH_STMW320DT:
-		printf ("M29W320DT (32 M, top sector)\n");
-		break;
-	case FLASH_MXLV320T:
-		printf ("MXLV320T (32 Mbit, top sector)\n");
-		break;
-	default:
-		printf("Unknown Chip Type\n");
-		break;
-	}
-
-	printf("  Size: %ld KB in %d Sectors\n",
-	       info->size >> 10, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count - 1))
-			size = info->start[i + 1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *)info->start[i];
-		size = size >> 2;	/* divide by 4 for longword access */
-		for (k = 0; k < size; k++) {
-			if (*flash++ != 0xffffffff) {
-				erased = 0;
-				break;
-			}
-		}
-
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s%s",
-		       info->start[i],
-		       erased ? " E" : "  ", info->protect[i] ? "RO " : "   ");
-	}
-	printf("\n");
-	return;
-}
-
-
-/*
- * The following code cannot be run from FLASH!
- */
-#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-{
-	/* bit 0 used for big flash marking */
-	if ((ulong)addr & 0x1) {
-		return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info);
-	} else {
-		return flash_get_size_1(addr, info);
-	}
-}
-
-static ulong flash_get_size_1(vu_long * addr, flash_info_t * info)
-#else
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-#endif
-{
-	short i;
-	CONFIG_SYS_FLASH_WORD_SIZE value;
-	ulong base = (ulong) addr;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
-
-	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
-
-	/* Write auto select command: read Manufacturer ID */
-	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
-	udelay(1000);
-
-	value = addr2[0];
-	DEBUGF("FLASH MANUFACT: %x\n", value);
-
-	switch (value) {
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
-		info->flash_id = FLASH_MAN_STM;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);	/* no or unknown flash  */
-	}
-
-	value = addr2[1];	/* device ID */
-	DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
-	switch (value) {
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x0080000;		/* => 512 KiB */
-		break;
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x0080000;		/* => 512 KiB */
-		break;
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x0080000;		/* => 512 KiB */
-		break;
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D:
-		info->flash_id += FLASH_AMD016;
-		info->sector_count = 32;
-		info->size = 0x00200000;	/* => 2 MiB */
-		break;
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C:
-		info->flash_id += FLASH_AMDLV033C;
-		info->sector_count = 64;
-		info->size = 0x00400000;	/* => 4 MiB */
-		break;
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00080000;	/* => 512 KiB */
-		break;
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00080000;	/* => 512 KiB */
-		break;
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00100000;	/* => 1 MiB */
-		break;
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00100000;	/* => 1 MiB */
-		break;
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00200000;	/* => 2 MiB */
-		break;
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;	/* => 2 MiB */
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);	/* => no or unknown flash */
-	}
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] =
-				    base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
-
-		/* For AMD29033C flash we need to resend the command of *
-		 * reading flash protection for upper 8 Mb of flash     */
-		if (i == 32) {
-			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
-			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
-		}
-
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-			info->protect[i] = 0;
-		else
-			info->protect[i] = addr2[2] & 1;
-	}
-
-	/* issue bank reset to return to read mode */
-	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
-
-	return (info->size);
-}
-
-static int wait_for_DQ7_1(flash_info_t * info, int sect)
-{
-	ulong start, now, last;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
-	    (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
-
-	start = get_timer(0);
-	last = start;
-	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
-	       (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return -1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc('.');
-			last = now;
-		}
-	}
-	return 0;
-}
-
-#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
-	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) {
-		return flash_erase_2(info, s_first, s_last);
-	} else {
-		return flash_erase_1(info, s_first, s_last);
-	}
-}
-
-static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
-#else
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-#endif
-{
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect;
-	int i;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf("- missing\n");
-		} else {
-			printf("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-		       prot);
-	} else {
-		printf("\n");
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
-
-			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
-				for (i = 0; i < 50; i++)
-					udelay(1000);	/* wait 1 ms */
-			} else {
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
-			}
-			/*
-			 * Wait for each sector to complete, it's more
-			 * reliable.  According to AMD Spec, you must
-			 * issue all erase commands within a specified
-			 * timeout.  This has been seen to fail, especially
-			 * if printf()s are included (for debug)!!
-			 */
-			wait_for_DQ7_1(info, sect);
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/* reset to read mode */
-	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-
-	printf(" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-static int write_word(flash_info_t * info, ulong dest, ulong data)
-{
-	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) {
-		return write_word_2(info, dest, data);
-	} else {
-		return write_word_1(info, dest, data);
-	}
-}
-
-static int write_word_1(flash_info_t * info, ulong dest, ulong data)
-#else
-static int write_word(flash_info_t * info, ulong dest, ulong data)
-#endif
-{
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
-	ulong start;
-	int i;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-
-	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
-		int flag;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
-
-		dest2[i] = data2[i];
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* data polling for D7 */
-		start = get_timer(0);
-		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
-
-			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-		}
-	}
-
-	return (0);
-}
-
-#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-
-#undef  CONFIG_SYS_FLASH_WORD_SIZE
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
-{
-	short i;
-	int n;
-	CONFIG_SYS_FLASH_WORD_SIZE value;
-	ulong base = (ulong) addr;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
-
-	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
-
-	/* Write auto select command: read Manufacturer ID */
-	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
-	udelay(1000);
-
-	value = addr2[0];
-	DEBUGF("FLASH MANUFACT: %x\n", value);
-
-	switch (value) {
-	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
-		info->flash_id = FLASH_MAN_STM;
-		break;
-	case (CONFIG_SYS_FLASH_WORD_SIZE) MX_MANUFACT:
-		info->flash_id = FLASH_MAN_MX;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);	/* no or unknown flash  */
-	}
-
-	value = addr2[1];	/* device ID */
-
-	DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
-	switch (value) {
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 71;
-		info->size = 0x00400000;  break;	/* => 4 MiB	*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 71;
-		info->size = 0x00400000;  break;	/* => 4 MiB	*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)STM_ID_29W320DT:
-		info->flash_id += FLASH_STMW320DT;
-		info->sector_count = 67;
-		info->size = 0x00400000;  break;	/* => 4 MiB	*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)MX_ID_LV320T:
-		info->flash_id += FLASH_MXLV320T;
-		info->sector_count = 71;
-		info->size = 0x00400000;
-		break;	/* => 4 MB	*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);	/* => no or unknown flash */
-	}
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
-		/* set sector offsets for top boot block type		*/
-		base += info->size;
-		i = info->sector_count;
-		/*  1 x 16k boot sector */
-		base -= 16 << 10;
-		--i;
-		info->start[i] = base;
-		/*  2 x 8k  boot sectors */
-		for (n=0; n<2; ++n) {
-			base -= 8 << 10;
-			--i;
-			info->start[i] = base;
-		}
-		/*  1 x 32k boot sector */
-		base -= 32 << 10;
-		--i;
-		info->start[i] = base;
-
-		while (i > 0) {			/* 64k regular sectors	*/
-			base -= 64 << 10;
-			--i;
-			info->start[i] = base;
-		}
-	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) {
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00002000;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000a000;
-		info->start[i--] = base + info->size - 0x0000c000;
-		info->start[i--] = base + info->size - 0x0000e000;
-		info->start[i--] = base + info->size - 0x00010000;
-
-		for (; i >= 0; i--)
-			info->start[i] = base + i * 0x00010000;
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00002000;
-			info->start[2] = base + 0x00004000;
-			info->start[3] = base + 0x00006000;
-			info->start[4] = base + 0x00008000;
-			info->start[5] = base + 0x0000a000;
-			info->start[6] = base + 0x0000c000;
-			info->start[7] = base + 0x0000e000;
-			for (i = 8; i < info->sector_count; i++) {
-				info->start[i] =
-				    base + ((i-7) * 0x00010000);
-			}
-		} else {
-			/* set sector offsets for top boot block type */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00002000;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			info->start[i--] = base + info->size - 0x0000a000;
-			info->start[i--] = base + info->size - 0x0000c000;
-			info->start[i--] = base + info->size - 0x0000e000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
-
-		/* For AMD29033C flash we need to resend the command of *
-		 * reading flash protection for upper 8 Mb of flash     */
-		if (i == 32) {
-			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
-			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
-		}
-
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-			info->protect[i] = 0;
-		else
-			info->protect[i] = addr2[2] & 1;
-	}
-
-	/* issue bank reset to return to read mode */
-	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
-
-	return (info->size);
-}
-
-static int wait_for_DQ7_2(flash_info_t * info, int sect)
-{
-	ulong start, now, last;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
-	    (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
-
-	start = get_timer(0);
-	last = start;
-	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
-	       (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return -1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc('.');
-			last = now;
-		}
-	}
-	return 0;
-}
-
-static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
-{
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect;
-	int i;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf("- missing\n");
-		} else {
-			printf("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-		       prot);
-	} else {
-		printf("\n");
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
-
-			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
-				for (i = 0; i < 50; i++)
-					udelay(1000);	/* wait 1 ms */
-			} else {
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
-			}
-			/*
-			 * Wait for each sector to complete, it's more
-			 * reliable.  According to AMD Spec, you must
-			 * issue all erase commands within a specified
-			 * timeout.  This has been seen to fail, especially
-			 * if printf()s are included (for debug)!!
-			 */
-			wait_for_DQ7_2(info, sect);
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/* reset to read mode */
-	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-
-	printf(" done\n");
-	return 0;
-}
-
-static int write_word_2(flash_info_t * info, ulong dest, ulong data)
-{
-	ulong *data_ptr = &data;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)data_ptr;
-	ulong start;
-	int i;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-
-	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
-		int flag;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
-
-		dest2[i] = data2[i];
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* data polling for D7 */
-		start = get_timer(0);
-		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
-
-			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-		}
-	}
-
-	return (0);
-}
-#endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */
diff --git a/board/amcc/katmai/Kconfig b/board/amcc/katmai/Kconfig
deleted file mode 100644
index fc606cf..0000000
--- a/board/amcc/katmai/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_KATMAI
-
-config SYS_BOARD
-	default "katmai"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "katmai"
-
-endif
diff --git a/board/amcc/katmai/MAINTAINERS b/board/amcc/katmai/MAINTAINERS
deleted file mode 100644
index f089352..0000000
--- a/board/amcc/katmai/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-KATMAI BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/katmai/
-F:	include/configs/katmai.h
-F:	configs/katmai_defconfig
diff --git a/board/amcc/katmai/Makefile b/board/amcc/katmai/Makefile
deleted file mode 100644
index b738def..0000000
--- a/board/amcc/katmai/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= katmai.o
-obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
-extra-y	+= init.o
diff --git a/board/amcc/katmai/chip_config.c b/board/amcc/katmai/chip_config.c
deleted file mode 100644
index 5e711c4..0000000
--- a/board/amcc/katmai/chip_config.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx_config.h>
-
-struct ppc4xx_config ppc4xx_config_val[] = {
-	{
-		"400-133","CPU: 400 PLB: 133 OPB:  66 EBC:  66",
-		{ 0x86, 0x78, 0xc2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 }
-	},
-	{
-		"500-166","CPU: 500 PLB: 166 OPB:  83 EBC:  83",
-		{ 0x87, 0x78, 0xf2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 }
-	},
-	{
-		"533-133","CPU: 533 PLB: 133 OPB:  66 EBC:  66",
-		{ 0x87, 0x79, 0x02, 0x52, 0x05, 0xa5, 0x04, 0xe1 }
-	},
-	{
-		"667-133","CPU: 667 PLB: 133 OPB:  66 EBC:  66",
-		{ 0x87, 0x79, 0x42, 0x56, 0x05, 0xa5, 0x04, 0xe1 }
-	},
-	{
-		"667-166","CPU: 667 PLB: 166 OPB:  83 EBC:  83",
-		{ 0x87, 0x79, 0x42, 0x06, 0x05, 0xa5, 0x04, 0xe1 }
-	},
-	{
-		"800-160","CPU: 800 PLB: 160 OPB:  53 EBC:  17",
-		{ 0x86, 0x79, 0x81, 0xa7, 0x07, 0xa5, 0x04, 0xe1 }
-	},
-};
-
-int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/amcc/katmai/config.mk b/board/amcc/katmai/config.mk
deleted file mode 100644
index 6108f79..0000000
--- a/board/amcc/katmai/config.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-#
-# AMCC 440SPe Evaluation (Katmai) board
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S
deleted file mode 100644
index 32f2667..0000000
--- a/board/amcc/katmai/init.S
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-	.section .bootpg,"ax"
-
-/**************************************************************************
- * TLB table for revA
- *************************************************************************/
-	.globl tlbtabA
-tlbtabA:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-	tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G)
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I)
-	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_RW | SA_IG)
-	tlbtab_end
-
-/**************************************************************************
- * TLB table for revB
- *
- * Notice: revB of the 440SPe chip is very strict about PLB real addresses
- * and ranges to be mapped for config space: it seems to only work with
- * d_nnnn_nnnn range (hangs the core upon config transaction attempts when
- * set otherwise) while revA uses c_nnnn_nnnn.
- *************************************************************************/
-	.globl tlbtabB
-tlbtabB:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-	tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G)
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I)
-
-	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K, CONFIG_SYS_ACE_BASE, 4,AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_RW | SA_IG)
-	tlbtab_end
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
deleted file mode 100644
index 7582d40..0000000
--- a/board/amcc/katmai/katmai.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * (C) Copyright 2007-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <i2c.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <netdev.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-#include <asm/4xx_pcie.h>
-#include <linux/errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f (void)
-{
-	unsigned long mfr;
-
-	/*----------------------------------------------------------------------+
-	 * Interrupt controller setup for the Katmai 440SPe Evaluation board.
-	 *-----------------------------------------------------------------------+
-	 *-----------------------------------------------------------------------+
-	 * Interrupt | Source                            | Pol.  | Sensi.| Crit. |
-	 *-----------+-----------------------------------+-------+-------+-------+
-	 * IRQ 00    | UART0                             | High  | Level | Non   |
-	 * IRQ 01    | UART1                             | High  | Level | Non   |
-	 * IRQ 02    | IIC0                              | High  | Level | Non   |
-	 * IRQ 03    | IIC1                              | High  | Level | Non   |
-	 * IRQ 04    | PCI0X0 MSG IN                     | High  | Level | Non   |
-	 * IRQ 05    | PCI0X0 CMD Write                  | High  | Level | Non   |
-	 * IRQ 06    | PCI0X0 Power Mgt                  | High  | Level | Non   |
-	 * IRQ 07    | PCI0X0 VPD Access                 | Rising| Edge  | Non   |
-	 * IRQ 08    | PCI0X0 MSI level 0                | High  | Lvl/ed| Non   |
-	 * IRQ 09    | External IRQ 15 - (PCI-Express)   | pgm H | Pgm   | Non   |
-	 * IRQ 10    | UIC2 Non-critical Int.            | NA    | NA    | Non   |
-	 * IRQ 11    | UIC2 Critical Interrupt           | NA    | NA    | Crit  |
-	 * IRQ 12    | PCI Express MSI Level 0           | Rising| Edge  | Non   |
-	 * IRQ 13    | PCI Express MSI Level 1           | Rising| Edge  | Non   |
-	 * IRQ 14    | PCI Express MSI Level 2           | Rising| Edge  | Non   |
-	 * IRQ 15    | PCI Express MSI Level 3           | Rising| Edge  | Non   |
-	 * IRQ 16    | UIC3 Non-critical Int.            | NA    | NA    | Non   |
-	 * IRQ 17    | UIC3 Critical Interrupt           | NA    | NA    | Crit  |
-	 * IRQ 18    | External IRQ 14 - (PCI-Express)   | Pgm   | Pgm   | Non   |
-	 * IRQ 19    | DMA Channel 0 FIFO Full           | High  | Level | Non   |
-	 * IRQ 20    | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
-	 * IRQ 21    | DMA Channel 1 FIFO Full           | High  | Level | Non   |
-	 * IRQ 22    | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
-	 * IRQ 23    | I2O Inbound Doorbell              | High  | Level | Non   |
-	 * IRQ 24    | Inbound Post List FIFO Not Empt   | High  | Level | Non   |
-	 * IRQ 25    | I2O Region 0 LL PLB Write         | High  | Level | Non   |
-	 * IRQ 26    | I2O Region 1 LL PLB Write         | High  | Level | Non   |
-	 * IRQ 27    | I2O Region 0 HB PLB Write         | High  | Level | Non   |
-	 * IRQ 28    | I2O Region 1 HB PLB Write         | High  | Level | Non   |
-	 * IRQ 29    | GPT Down Count Timer              | Rising| Edge  | Non   |
-	 * IRQ 30    | UIC1 Non-critical Int.            | NA    | NA    | Non   |
-	 * IRQ 31    | UIC1 Critical Interrupt           | NA    | NA    | Crit. |
-	 *------------------------------------------------------------------------
-	 * IRQ 32    | Ext. IRQ 13 - (PCI-Express)       |pgm (H)|pgm/Lvl| Non   |
-	 * IRQ 33    | MAL Serr                          | High  | Level | Non   |
-	 * IRQ 34    | MAL Txde                          | High  | Level | Non   |
-	 * IRQ 35    | MAL Rxde                          | High  | Level | Non   |
-	 * IRQ 36    | DMC CE or DMC UE                  | High  | Level | Non   |
-	 * IRQ 37    | EBC or UART2                      | High  |Lvl Edg| Non   |
-	 * IRQ 38    | MAL TX EOB                        | High  | Level | Non   |
-	 * IRQ 39    | MAL RX EOB                        | High  | Level | Non   |
-	 * IRQ 40    | PCIX0 MSI Level 1                 | High  |Lvl Edg| Non   |
-	 * IRQ 41    | PCIX0 MSI level 2                 | High  |Lvl Edg| Non   |
-	 * IRQ 42    | PCIX0 MSI level 3                 | High  |Lvl Edg| Non   |
-	 * IRQ 43    | L2 Cache                          | Risin | Edge  | Non   |
-	 * IRQ 44    | GPT Compare Timer 0               | Risin | Edge  | Non   |
-	 * IRQ 45    | GPT Compare Timer 1               | Risin | Edge  | Non   |
-	 * IRQ 46    | GPT Compare Timer 2               | Risin | Edge  | Non   |
-	 * IRQ 47    | GPT Compare Timer 3               | Risin | Edge  | Non   |
-	 * IRQ 48    | GPT Compare Timer 4               | Risin | Edge  | Non   |
-	 * IRQ 49    | Ext. IRQ 12 - PCI-X               |pgm/Fal|pgm/Lvl| Non   |
-	 * IRQ 50    | Ext. IRQ 11 -                     |pgm (H)|pgm/Lvl| Non   |
-	 * IRQ 51    | Ext. IRQ 10 -                     |pgm (H)|pgm/Lvl| Non   |
-	 * IRQ 52    | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
-	 * IRQ 53    | Ext. IRQ 8                        |pgm (H)|pgm/Lvl| Non   |
-	 * IRQ 54    | DMA Error                         | High  | Level | Non   |
-	 * IRQ 55    | DMA I2O Error                     | High  | Level | Non   |
-	 * IRQ 56    | Serial ROM                        | High  | Level | Non   |
-	 * IRQ 57    | PCIX0 Error                       | High  | Edge  | Non   |
-	 * IRQ 58    | Ext. IRQ 7-                       |pgm (H)|pgm/Lvl| Non   |
-	 * IRQ 59    | Ext. IRQ 6-                       |pgm (H)|pgm/Lvl| Non   |
-	 * IRQ 60    | EMAC0 Interrupt                   | High  | Level | Non   |
-	 * IRQ 61    | EMAC0 Wake-up                     | High  | Level | Non   |
-	 * IRQ 62    | Reserved                          | High  | Level | Non   |
-	 * IRQ 63    | XOR                               | High  | Level | Non   |
-	 *-----------------------------------------------------------------------
-	 * IRQ 64    | PE0 AL                            | High  | Level | Non   |
-	 * IRQ 65    | PE0 VPD Access                    | Risin | Edge  | Non   |
-	 * IRQ 66    | PE0 Hot Reset Request             | Risin | Edge  | Non   |
-	 * IRQ 67    | PE0 Hot Reset Request             | Falli | Edge  | Non   |
-	 * IRQ 68    | PE0 TCR                           | High  | Level | Non   |
-	 * IRQ 69    | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
-	 * IRQ 70    | PE0 DCR Error                     | High  | Level | Non   |
-	 * IRQ 71    | Reserved                          | N/A   | N/A   | Non   |
-	 * IRQ 72    | PE1 AL                            | High  | Level | Non   |
-	 * IRQ 73    | PE1 VPD Access                    | Risin | Edge  | Non   |
-	 * IRQ 74    | PE1 Hot Reset Request             | Risin | Edge  | Non   |
-	 * IRQ 75    | PE1 Hot Reset Request             | Falli | Edge  | Non   |
-	 * IRQ 76    | PE1 TCR                           | High  | Level | Non   |
-	 * IRQ 77    | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
-	 * IRQ 78    | PE1 DCR Error                     | High  | Level | Non   |
-	 * IRQ 79    | Reserved                          | N/A   | N/A   | Non   |
-	 * IRQ 80    | PE2 AL                            | High  | Level | Non   |
-	 * IRQ 81    | PE2 VPD Access                    | Risin | Edge  | Non   |
-	 * IRQ 82    | PE2 Hot Reset Request             | Risin | Edge  | Non   |
-	 * IRQ 83    | PE2 Hot Reset Request             | Falli | Edge  | Non   |
-	 * IRQ 84    | PE2 TCR                           | High  | Level | Non   |
-	 * IRQ 85    | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
-	 * IRQ 86    | PE2 DCR Error                     | High  | Level | Non   |
-	 * IRQ 87    | Reserved                          | N/A   | N/A   | Non   |
-	 * IRQ 88    | External IRQ(5)                   | Progr | Progr | Non   |
-	 * IRQ 89    | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
-	 * IRQ 90    | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
-	 * IRQ 91    | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
-	 * IRQ 92    | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
-	 * IRQ 93    | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
-	 * IRQ 94    | Reserved                          | N/A   | N/A   | Non   |
-	 * IRQ 95    | Reserved                          | N/A   | N/A   | Non   |
-	 *-----------------------------------------------------------------------
-	 * IRQ 96    | PE0 INTA                          | High  | Level | Non   |
-	 * IRQ 97    | PE0 INTB                          | High  | Level | Non   |
-	 * IRQ 98    | PE0 INTC                          | High  | Level | Non   |
-	 * IRQ 99    | PE0 INTD                          | High  | Level | Non   |
-	 * IRQ 100   | PE1 INTA                          | High  | Level | Non   |
-	 * IRQ 101   | PE1 INTB                          | High  | Level | Non   |
-	 * IRQ 102   | PE1 INTC                          | High  | Level | Non   |
-	 * IRQ 103   | PE1 INTD                          | High  | Level | Non   |
-	 * IRQ 104   | PE2 INTA                          | High  | Level | Non   |
-	 * IRQ 105   | PE2 INTB                          | High  | Level | Non   |
-	 * IRQ 106   | PE2 INTC                          | High  | Level | Non   |
-	 * IRQ 107   | PE2 INTD                          | Risin | Edge  | Non   |
-	 * IRQ 108   | PCI Express MSI Level 4           | Risin | Edge  | Non   |
-	 * IRQ 109   | PCI Express MSI Level 5           | Risin | Edge  | Non   |
-	 * IRQ 110   | PCI Express MSI Level 6           | Risin | Edge  | Non   |
-	 * IRQ 111   | PCI Express MSI Level 7           | Risin | Edge  | Non   |
-	 * IRQ 116   | PCI Express MSI Level 12          | Risin | Edge  | Non   |
-	 * IRQ 112   | PCI Express MSI Level 8           | Risin | Edge  | Non   |
-	 * IRQ 113   | PCI Express MSI Level 9           | Risin | Edge  | Non   |
-	 * IRQ 114   | PCI Express MSI Level 10          | Risin | Edge  | Non   |
-	 * IRQ 115   | PCI Express MSI Level 11          | Risin | Edge  | Non   |
-	 * IRQ 117   | PCI Express MSI Level 13          | Risin | Edge  | Non   |
-	 * IRQ 118   | PCI Express MSI Level 14          | Risin | Edge  | Non   |
-	 * IRQ 119   | PCI Express MSI Level 15          | Risin | Edge  | Non   |
-	 * IRQ 120   | PCI Express MSI Level 16          | Risin | Edge  | Non   |
-	 * IRQ 121   | PCI Express MSI Level 17          | Risin | Edge  | Non   |
-	 * IRQ 122   | PCI Express MSI Level 18          | Risin | Edge  | Non   |
-	 * IRQ 123   | PCI Express MSI Level 19          | Risin | Edge  | Non   |
-	 * IRQ 124   | PCI Express MSI Level 20          | Risin | Edge  | Non   |
-	 * IRQ 125   | PCI Express MSI Level 21          | Risin | Edge  | Non   |
-	 * IRQ 126   | PCI Express MSI Level 22          | Risin | Edge  | Non   |
-	 * IRQ 127   | PCI Express MSI Level 23          | Risin | Edge  | Non   |
-	 *-----------+-----------------------------------+-------+-------+-------+ */
-	/*-------------------------------------------------------------------------+
-	 * Put UICs in PowerPC440SPemode.
-	 * Initialise UIC registers.  Clear all interrupts.  Disable all interrupts.
-	 * Set critical interrupt values.  Set interrupt polarities.  Set interrupt
-	 * trigger levels.  Make bit 0 High  priority.  Clear all interrupts again.
-	 *------------------------------------------------------------------------*/
-	mtdcr (UIC3SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC3ER, 0x00000000);	/* disable all interrupts */
-	mtdcr (UIC3CR, 0x00000000);	/* Set Critical / Non Critical interrupts: */
-	mtdcr (UIC3PR, 0xffffffff);	/* Set Interrupt Polarities*/
-	mtdcr (UIC3TR, 0x001fffff);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC3VR, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr (UIC3SR, 0x00000000);	/* clear all  interrupts*/
-	mtdcr (UIC3SR, 0xffffffff);	/* clear all  interrupts*/
-
-
-	mtdcr (UIC2SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC2ER, 0x00000000);	/* disable all interrupts*/
-	mtdcr (UIC2CR, 0x00000000);	/* Set Critical / Non Critical interrupts*/
-	mtdcr (UIC2PR, 0xebebebff);	/* Set Interrupt Polarities*/
-	mtdcr (UIC2TR, 0x74747400);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC2VR, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr (UIC2SR, 0x00000000);	/* clear all interrupts */
-	mtdcr (UIC2SR, 0xffffffff);	/* clear all interrupts */
-
-	mtdcr (UIC1SR, 0xffffffff);	/* Clear all interrupts*/
-	mtdcr (UIC1ER, 0x00000000);	/* disable all interrupts*/
-	mtdcr (UIC1CR, 0x00000000);	/* Set Critical / Non Critical interrupts*/
-	mtdcr (UIC1PR, 0xffffffff);	/* Set Interrupt Polarities */
-	mtdcr (UIC1TR, 0x001f8040);	/* Set Interrupt Trigger Levels*/
-	mtdcr (UIC1VR, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr (UIC1SR, 0x00000000);	/* clear all interrupts*/
-	mtdcr (UIC1SR, 0xffffffff);	/* clear all interrupts*/
-
-	mtdcr (UIC0SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC0ER, 0x00000000);	/* disable all interrupts excepted cascade    to be checked */
-	mtdcr (UIC0CR, 0x00104001);	/* Set Critical / Non Critical interrupts*/
-	mtdcr (UIC0PR, 0xffffffff);	/* Set Interrupt Polarities*/
-	mtdcr (UIC0TR, 0x010f0004);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC0VR, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr (UIC0SR, 0x00000000);	/* clear all interrupts*/
-	mtdcr (UIC0SR, 0xffffffff);	/* clear all interrupts*/
-
-	mfsdr(SDR0_MFR, mfr);
-	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mtsdr(SDR0_MFR, mfr);
-
-	mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0);
-
-	out32(GPIO0_OR, CONFIG_SYS_GPIO_OR);
-	out32(GPIO0_ODR, CONFIG_SYS_GPIO_ODR);
-	out32(GPIO0_TCR, CONFIG_SYS_GPIO_TCR);
-
-	return 0;
-}
-
-int checkboard (void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: Katmai - AMCC 440SPe Evaluation Board");
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-/*
- * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
- * board specific values.
- */
-u32 ddr_wrdtr(u32 default_val) {
-	return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823);
-}
-
-u32 ddr_clktr(u32 default_val) {
-	return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
-}
-
-#if defined(CONFIG_PCI)
-int board_pcie_card_present(int port)
-{
-	u32 val;
-
-	val = in32(GPIO0_IR);
-	switch (port) {
-	case 0:
-		return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0));
-	case 1:
-		return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1));
-	case 2:
-		return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2));
-	default:
-		return 0;
-	}
-}
-#endif	/* defined(CONFIG_PCI) */
-
-int board_eth_init(bd_t *bis)
-{
-	cpu_eth_init(bis);
-	return pci_eth_init(bis);
-}
diff --git a/board/amcc/kilauea/Kconfig b/board/amcc/kilauea/Kconfig
deleted file mode 100644
index 3f2f434..0000000
--- a/board/amcc/kilauea/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_KILAUEA
-
-config SYS_BOARD
-	default "kilauea"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "kilauea"
-
-endif
diff --git a/board/amcc/kilauea/MAINTAINERS b/board/amcc/kilauea/MAINTAINERS
deleted file mode 100644
index 12bbcb1..0000000
--- a/board/amcc/kilauea/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-KILAUEA BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/kilauea/
-F:	include/configs/kilauea.h
-F:	configs/haleakala_defconfig
-F:	configs/kilauea_defconfig
diff --git a/board/amcc/kilauea/Makefile b/board/amcc/kilauea/Makefile
deleted file mode 100644
index 754dadc..0000000
--- a/board/amcc/kilauea/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= kilauea.o
-obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
diff --git a/board/amcc/kilauea/chip_config.c b/board/amcc/kilauea/chip_config.c
deleted file mode 100644
index 7e9dd3b..0000000
--- a/board/amcc/kilauea/chip_config.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx_config.h>
-
-/* NAND booting versions differ in bytes: 6, 8, 9, 11, 12 */
-
-struct ppc4xx_config ppc4xx_config_val[] = {
-	{
-		"333-nor","NOR  CPU: 333 PLB: 166 OPB:  83 EBC:  83",
-		{
-			0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"400-133-nor", "NOR  CPU: 400 PLB: 133 OPB:  66 EBC:  66",
-		{
-			0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"400-nor", "NOR  CPU: 400 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"533-nor", "NOR  CPU: 533 PLB: 177 OPB:  88 EBC:  88",
-		{
-			0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"533-nand", "NOR  CPU: 533 PLB: 177 OPB:  88 EBC:  88",
-		{
-			0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0f, 0x00,
-			0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"600-nor", "NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"600-nand", "NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0f, 0x00,
-			0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"666-nor", "NOR  CPU: 666 PLB: 222 OPB: 111 EBC: 111",
-		{
-			0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-};
-
-int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/amcc/kilauea/config.mk b/board/amcc/kilauea/config.mk
deleted file mode 100644
index 0dc15c1..0000000
--- a/board/amcc/kilauea/config.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2007-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c
deleted file mode 100644
index 2937217..0000000
--- a/board/amcc/kilauea/kilauea.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc405.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <linux/errno.h>
-
-#if defined(CONFIG_PCI)
-#include <pci.h>
-#include <asm/4xx_pcie.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-static int board_cpld_version(void)
-{
-	u32 cpld;
-
-	cpld = in_be32((void *)CONFIG_SYS_FPGA_FIFO_BASE);
-	if ((cpld & CONFIG_SYS_FPGA_MAGIC_MASK) != CONFIG_SYS_FPGA_MAGIC) {
-		/*
-		 * Magic not found -> "old" CPLD revision which needs
-		 * the "old" EBC configuration
-		 */
-		mtebc(PB2AP, EBC_BXAP_BME_ENABLED | EBC_BXAP_FWT_ENCODE(5) |
-		      EBC_BXAP_BWT_ENCODE(0) | EBC_BXAP_BCE_DISABLE |
-		      EBC_BXAP_BCT_2TRANS | EBC_BXAP_CSN_ENCODE(0) |
-		      EBC_BXAP_OEN_ENCODE(0) | EBC_BXAP_WBN_ENCODE(3) |
-		      EBC_BXAP_WBF_ENCODE(0) | EBC_BXAP_TH_ENCODE(4) |
-		      EBC_BXAP_RE_DISABLED | EBC_BXAP_SOR_DELAYED |
-		      EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED);
-
-		/*
-		 * Return 0 for "old" CPLD version
-		 */
-		return 0;
-	}
-
-	/*
-	 * Magic found -> "new" CPLD revision which needs no new
-	 * EBC configuration
-	 */
-	return (cpld & CONFIG_SYS_FPGA_VER_MASK) >> 8;
-}
-
-/*
- * Board early initialization function
- */
-int board_early_init_f (void)
-{
-	u32 val;
-
-	/*--------------------------------------------------------------------+
-	 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
-	 +--------------------------------------------------------------------+
-	+---------------------------------------------------------------------+
-	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
-	+---------+-----------------------------------+-------+-------+-------+
-	| IRQ 00  | UART0                             | High  | Level | Non   |
-	| IRQ 01  | UART1                             | High  | Level | Non   |
-	| IRQ 02  | IIC0                              | High  | Level | Non   |
-	| IRQ 03  | TBD                               | High  | Level | Non   |
-	| IRQ 04  | TBD                               | High  | Level | Non   |
-	| IRQ 05  | EBM                               | High  | Level | Non   |
-	| IRQ 06  | BGI                               | High  | Level | Non   |
-	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
-	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
-	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
-	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
-	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
-	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
-	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
-	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
-	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
-	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
-	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
-	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
-	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
-	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
-	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
-	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
-	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
-	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
-	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
-	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
-	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
-	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
-	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
-	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
-	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
-	|----------------------------------------------------------------------
-	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
-	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
-	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
-	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
-	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
-	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
-	| IRQ 38  | NDFC                              | High  | Level | Non   |
-	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
-	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
-	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
-	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
-	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
-	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
-	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
-	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
-	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
-	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
-	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
-	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
-	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
-	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
-	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
-	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
-	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
-	|----------------------------------------------------------------------
-	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
-	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
-	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
-	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
-	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
-	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
-	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
-	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
-	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
-	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
-	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
-	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
-	|---------------------------------------------------------------------
-	+---------+-----------------------------------+-------+-------+------*/
-	/*--------------------------------------------------------------------+
-	 | Initialise UIC registers.  Clear all interrupts.  Disable all
-	 | interrupts.
-	 | Set critical interrupt values.  Set interrupt polarities.  Set
-	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
-	 | interrupts again.
-	 +-------------------------------------------------------------------*/
-
-	mtdcr (UIC2SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC2ER, 0x00000000);	/* disable all interrupts */
-	mtdcr (UIC2CR, 0x00000000);	/* Set Critical / Non Critical interrupts */
-	mtdcr (UIC2PR, 0xf7ffffff);	/* Set Interrupt Polarities */
-	mtdcr (UIC2TR, 0x01e1fff8);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC2VR, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr (UIC2SR, 0x00000000);	/* clear all interrupts */
-	mtdcr (UIC2SR, 0xffffffff);	/* clear all interrupts */
-
-	mtdcr (UIC1SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC1ER, 0x00000000);	/* disable all interrupts */
-	mtdcr (UIC1CR, 0x00000000);	/* Set Critical / Non Critical interrupts */
-	mtdcr (UIC1PR, 0xfffac785);	/* Set Interrupt Polarities */
-	mtdcr (UIC1TR, 0x001d0040);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC1VR, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr (UIC1SR, 0x00000000);	/* clear all interrupts */
-	mtdcr (UIC1SR, 0xffffffff);	/* clear all interrupts */
-
-	mtdcr (UIC0SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC0ER, 0x0000000a);	/* Disable all interrupts */
-					/* Except cascade UIC0 and UIC1 */
-	mtdcr (UIC0CR, 0x00000000);	/* Set Critical / Non Critical interrupts */
-	mtdcr (UIC0PR, 0xffbfefef);	/* Set Interrupt Polarities */
-	mtdcr (UIC0TR, 0x00007000);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC0VR, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr (UIC0SR, 0x00000000);	/* clear all interrupts */
-	mtdcr (UIC0SR, 0xffffffff);	/* clear all interrupts */
-
-	/*
-	 * Note: Some cores are still in reset when the chip starts, so
-	 * take them out of reset
-	 */
-	mtsdr(SDR0_SRST, 0);
-
-	/* Configure 405EX for NAND usage */
-	val = SDR0_CUST0_MUX_NDFC_SEL |
-		SDR0_CUST0_NDFC_ENABLE |
-		SDR0_CUST0_NDFC_BW_8_BIT |
-		SDR0_CUST0_NRB_BUSY |
-		(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
-	mtsdr(SDR0_CUST0, val);
-
-	/*
-	 * Configure PFC (Pin Function Control) registers
-	 * -> Enable USB
-	 */
-	val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
-	mtsdr(SDR0_PFC1, val);
-
-	/*
-	 * The CPLD version detection has to be the first access to
-	 * the CPLD, so we need to make this access this early and
-	 * save the CPLD version for later.
-	 */
-	gd->board_type = board_cpld_version();
-
-	/*
-	 * Configure FPGA register with PCIe reset
-	 */
-	out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc4);	/* assert PCIe reset */
-	mdelay(50);
-	out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc7);	/* deassert PCIe reset */
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-#ifdef CONFIG_ENV_IS_IN_FLASH
-	/* Monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      -CONFIG_SYS_MONITOR_LEN,
-		      0xffffffff,
-		      &flash_info[0]);
-#endif
-
-	return 0;
-}
-
-static int is_405exr(void)
-{
-	u32 pvr = get_pvr();
-
-	if (pvr & 0x00000004)
-		return 0;		/* bit 2 set -> 405EX */
-
-	return 1;			/* bit 2 cleared -> 405EXr */
-}
-
-int board_emac_count(void)
-{
-	/*
-	 * 405EXr only has one EMAC interface, 405EX has two
-	 */
-	if (is_405exr())
-		return 1;
-	else
-		return 2;
-}
-
-/*
- * Override the weak default implementation and return the
- * last PCIe slot number (max number - 1).
- */
-int board_pcie_last(void)
-{
-	/*
-	 * 405EXr only has one EMAC interface, 405EX has two
-	 */
-	if (is_405exr())
-		return 1 - 1;
-	else
-		return 2 - 1;
-}
-
-int checkboard (void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	if (is_405exr())
-		printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board");
-	else
-		printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	printf(" (CPLD rev. %ld)\n", gd->board_type);
-
-	return (0);
-}
diff --git a/board/amcc/luan/Kconfig b/board/amcc/luan/Kconfig
deleted file mode 100644
index 3df90af..0000000
--- a/board/amcc/luan/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_LUAN
-
-config SYS_BOARD
-	default "luan"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "luan"
-
-endif
diff --git a/board/amcc/luan/MAINTAINERS b/board/amcc/luan/MAINTAINERS
deleted file mode 100644
index a23296d..0000000
--- a/board/amcc/luan/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-LUAN BOARD
-M:	John Otken <jotken@softadvances.com>
-S:	Maintained
-F:	board/amcc/luan/
-F:	include/configs/luan.h
-F:	configs/luan_defconfig
diff --git a/board/amcc/luan/Makefile b/board/amcc/luan/Makefile
deleted file mode 100644
index 345ad56..0000000
--- a/board/amcc/luan/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= luan.o flash.o
-extra-y	+= init.o
diff --git a/board/amcc/luan/config.mk b/board/amcc/luan/config.mk
deleted file mode 100644
index f18b097..0000000
--- a/board/amcc/luan/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/luan/epld.h b/board/amcc/luan/epld.h
deleted file mode 100644
index 569d78c..0000000
--- a/board/amcc/luan/epld.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#define EPLD0_FSEL_FB2		0x80
-#define EPLD0_BOOT_SMALL_FLASH	0x40	/* 0 boot from large flash, 1 from small flash */
-#define EPLD0_RAW_CARD_BIT0	0x20	/* raw card EC level */
-#define EPLD0_RAW_CARD_BIT1	0x10
-#define EPLD0_RAW_CARD_BIT2	0x08
-#define EPLD0_EXT_ARB_SEL_N	0x04	/* 0 select on-board ext PCI-X, 1 internal arbiter */
-#define EPLD0_FLASH_ONBRD_N	0x02	/* 0 small flash/SRAM active, 1 block access */
-#define EPLD0_FLASH_SRAM_SEL_N	0x01	/* 0 SRAM at mem top, 1 small flash at mem top */
-
-#define EPLD1_CLK_CNTL0		0x80	/* FSEL-FB1 of MPC9772 */
-#define EPLD1_PCIL0_CNTL1	0x40	/* S*0 of 9531 */
-#define EPLD1_PCIL0_CNTL2	0x20	/* S*1 of 9531 */
-#define EPLD1_CLK_CNTL3		0x10	/* FSEL-B1 of MPC9772 */
-#define EPLD1_CLK_CNTL4		0x08	/* FSEL-B0 of MPC9772 */
-#define EPLD1_MASTER_CLOCK6	0x04	/* clock source select 6 */
-#define EPLD1_MASTER_CLOCK7	0x02	/* clock source select 7 */
-#define EPLD1_MASTER_CLOCK8	0x01	/* clock source select 8 */
-
-#define EPLD2_ETH_MODE_10	0x80	/* Ethernet mode 10   (default = 1) */
-#define EPLD2_ETH_MODE_100	0x40	/* Ethernet mode 100  (default = 1) */
-#define EPLD2_ETH_MODE_1000	0x20	/* Ethernet mode 1000 (default = 1) */
-#define EPLD2_ETH_DUPLEX_MODE	0x10	/* Ethernet force full duplex mode */
-#define EPLD2_RESET_ETH_N	0x08	/* Ethernet reset (default = 1) */
-#define EPLD2_ETH_AUTO_NEGO	0x04	/* Ethernet auto negotiation */
-#define EPLD2_DEFAULT_UART_N	0x01	/* 0 select DSR DTR for UART1 */
-
-#define EPLD3_STATUS_LED4	0x08	/* status LED 8 (1 = LED on) */
-#define EPLD3_STATUS_LED3	0x04	/* status LED 4 (1 = LED on) */
-#define EPLD3_STATUS_LED2	0x02	/* status LED 2 (1 = LED on) */
-#define EPLD3_STATUS_LED1	0x01	/* status LED 1 (1 = LED on) */
-
-#define EPLD4_PCIL0_VTH1	0x80	/* PCI-X 0 VTH1 status */
-#define EPLD4_PCIL0_VTH2	0x40	/* PCI-X 0 VTH2 status */
-#define EPLD4_PCIL0_VTH3	0x20	/* PCI-X 0 VTH3 status */
-#define EPLD4_PCIL0_VTH4	0x10	/* PCI-X 0 VTH4 status */
-#define EPLD4_PCIX1_VTH1	0x08	/* PCI-X 1 VTH1 status */
-#define EPLD4_PCIX1_VTH2	0x04	/* PCI-X 1 VTH2 status */
-#define EPLD4_PCIX1_VTH3	0x02	/* PCI-X 1 VTH3 status */
-#define EPLD4_PCIX1_VTH4	0x01	/* PCI-X 1 VTH4 status */
-
-#define EPLD5_PCIL0_INT0	0x80	/* PCIX0 INT0 status, write 0 to reset */
-#define EPLD5_PCIL0_INT1	0x40	/* PCIX0 INT1 status, write 0 to reset */
-#define EPLD5_PCIL0_INT2	0x20	/* PCIX0 INT2 status, write 0 to reset */
-#define EPLD5_PCIL0_INT3	0x10	/* PCIX0 INT3 status, write 0 to reset */
-#define EPLD5_PCIX1_INT0	0x08	/* PCIX1 INT0 status, write 0 to reset */
-#define EPLD5_PCIX1_INT1	0x04	/* PCIX1 INT1 status, write 0 to reset */
-#define EPLD5_PCIX1_INT2	0x02	/* PCIX1 INT2 status, write 0 to reset */
-#define EPLD5_PCIX1_INT3	0x01	/* PCIX1 INT3 status, write 0 to reset */
-
-#define EPLD6_PCIL0_RESET_CTL	0x80	/* 0=enable slot reset, 1=disable slot reset */
-#define EPLD6_PCIX1_RESET_CTL	0x40	/* 0=enable slot reset, 1=disable slot reset */
-#define EPLD6_ETH_INT_MODE	0x20	/* 0=IRQ5 recv's external eth int */
-#define EPLD6_PCIX2_RESET_CTL	0x10	/* 0=enable slot reset, 1=disable slot reset */
-#define EPLD6_PCI1_CLKCNTL1	0x80	/* PCI1 clock control S*0 of 9531 */
-#define EPLD6_PCI1_CLKCNTL2	0x40	/* PCI1 clock control S*1 of 9531 */
-#define EPLD6_PCI2_CLKCNTL1	0x20	/* PCI2 clock control S*0 of 9531 */
-#define EPLD6_PCI2_CLKCNTL2	0x10	/* PCI2 clock control S*1 of 9531 */
-
-#define EPLD7_VTH1		0x80	/* PCI2 VTH1 status */
-#define EPLD7_VTH2		0x40	/* PCI2 VTH2 status */
-#define EPLD7_VTH3		0x20	/* PCI2 VTH3 status */
-#define EPLD7_VTH4		0x10	/* PCI2 VTH4 status */
-#define EPLD7_INTA_MODE		0x80	/* see S5 on SW2 for details */
-#define EPLD7_PCI_INT_MODE_N	0x40	/* see S1 on SW2 for details */
-#define EPLD7_WRITE_ENABLE_GPIO	0x20	/* see S2 on SW2 for details */
-#define EPLD7_WRITE_ENABLE_INT	0x10	/* see S3 on SW2 for details */
-
-
-typedef struct {
-    unsigned char  status;		/* misc status */
-    unsigned char  clock;		/* clock status, PCI-X clock control */
-    unsigned char  ethuart;		/* Ethernet, UART status */
-    unsigned char  leds;		/* LED register */
-    unsigned char  vth01;		/* PCI0, PCI1 VTH register */
-    unsigned char  pciints;		/* PCI0, PCI1 interrupts */
-    unsigned char  pci2;		/* PCI2 interrupts, clock control */
-    unsigned char  vth2;		/* PCI2 VTH register */
-    unsigned char  filler1[4096-8];
-    unsigned char  gpio00;		/* GPIO bits  0-7 */
-    unsigned char  gpio08;		/* GPIO bits  8-15 */
-    unsigned char  gpio16;		/* GPIO bits 16-23 */
-    unsigned char  gpio24;		/* GPIO bits 24-31 */
-    unsigned char  filler2[4096-4];
-    unsigned char  version;		/* EPLD version */
-} epld_t;
diff --git a/board/amcc/luan/flash.c b/board/amcc/luan/flash.c
deleted file mode 100644
index a242bef..0000000
--- a/board/amcc/luan/flash.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif				/* DEBUG */
-
-static unsigned long flash_addr_table[1][CONFIG_SYS_MAX_FLASH_BANKS] = {
-	{0xff900000, 0xff980000, 0xffc00000},	/* 0:000: configuraton 3 */
-};
-
-/*
- * include common flash code (for amcc boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-
-unsigned long flash_init(void)
-{
-	unsigned long total_b = 0;
-	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
-	unsigned short index = 0;
-	int i;
-
-	/* read FPGA base register FPGA_REG0 */
-
-	DEBUGF("\n");
-	DEBUGF("FLASH: Index: %d\n", index);
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		flash_info[i].sector_count = -1;
-		flash_info[i].size = 0;
-
-		/* check whether the address is 0 */
-		if (flash_addr_table[index][i] == 0) {
-			continue;
-		}
-
-		/* call flash_get_size() to initialize sector address */
-		size_b[i] = flash_get_size((vu_long *)
-					   flash_addr_table[index][i],
-					   &flash_info[i]);
-		flash_info[i].size = size_b[i];
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-			       i, size_b[i], size_b[i] << 20);
-			flash_info[i].sector_count = -1;
-			flash_info[i].size = 0;
-		}
-
-		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
-				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
-				    &flash_info[2]);
-#ifdef CONFIG_ENV_IS_IN_FLASH
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
-				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[2]);
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
-				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[2]);
-#endif
-
-		total_b += flash_info[i].size;
-	}
-
-	return total_b;
-}
diff --git a/board/amcc/luan/init.S b/board/amcc/luan/init.S
deleted file mode 100644
index 0f4a78e..0000000
--- a/board/amcc/luan/init.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-	tlbentry(0xfff00000, SZ_1M, 0xfff00000, 1, AC_RWX | SA_G)
-
-	tlbentry(0xffc00000, SZ_1M, 0xffc00000, 1, AC_RWX | SA_IG)
-	tlbentry(0xffd00000, SZ_1M, 0xffd00000, 1, AC_RWX | SA_IG)
-	tlbentry(0xffe00000, SZ_1M, 0xffe00000, 1, AC_RWX | SA_IG)
-	tlbentry(0xff900000, SZ_1M, 0xff900000, 1, AC_RWX | SA_IG)
-	tlbentry(CONFIG_SYS_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_RW | SA_IG)
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-	/* internal ram (l2 cache) */
-	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_RWX | SA_I)
-
-	/* peripherals at f0000000 */
-	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, CONFIG_SYS_PERIPHERAL_BASE, 1, AC_RW | SA_IG)
-
-	/* PCI */
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 9, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_RW | SA_IG)
-	tlbtab_end
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
deleted file mode 100644
index f98231a..0000000
--- a/board/amcc/luan/luan.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * (C) Copyright 2005
- * John Otken, jotken@softadvances.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-#include <asm/ppc4xx-isram.h>
-#include <spd_sdram.h>
-#include "epld.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-
-/*************************************************************************
- *  int board_early_init_f()
- *
- ************************************************************************/
-int board_early_init_f(void)
-{
-	u32 mfr;
-
-	mtebc( PB0AP,  0x03800000 );	/* set chip selects */
-	mtebc( PB0CR,  0xffc58000 );	/* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
-	mtebc( PB1AP,  0x03800000 );
-	mtebc( PB1CR,  0xff018000 );	/* ebc0_b1cr, 1MB at 0xff000000 CS1 */
-	mtebc( PB2AP,  0x03800000 );
-	mtebc( PB2CR,  0xff838000 );	/* ebc0_b2cr, 2MB at 0xff800000 CS2 */
-
-	mtdcr( UIC1SR, 0xffffffff );	/* Clear all interrupts */
-	mtdcr( UIC1ER, 0x00000000 );	/* disable all interrupts */
-	mtdcr( UIC1CR, 0x00000000 );	/* Set Critical / Non Critical interrupts */
-	mtdcr( UIC1PR, 0x7fff83ff );	/* Set Interrupt Polarities */
-	mtdcr( UIC1TR, 0x001f8000 );	/* Set Interrupt Trigger Levels */
-	mtdcr( UIC1VR, 0x00000001 );	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr( UIC1SR, 0x00000000 );	/* clear all interrupts */
-	mtdcr( UIC1SR, 0xffffffff );
-
-	mtdcr( UIC0SR, 0xffffffff );	/* Clear all interrupts */
-	mtdcr( UIC0ER, 0x00000000 );	/* disable all interrupts excepted cascade */
-	mtdcr( UIC0CR, 0x00000001 );	/* Set Critical / Non Critical interrupts */
-	mtdcr( UIC0PR, 0xffffffff );	/* Set Interrupt Polarities */
-	mtdcr( UIC0TR, 0x01000004 );	/* Set Interrupt Trigger Levels */
-	mtdcr( UIC0VR, 0x00000001 );	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr( UIC0SR, 0x00000000 );	/* clear all interrupts */
-	mtdcr( UIC0SR, 0xffffffff );
-
-	mfsdr(SDR0_MFR, mfr);
-	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mtsdr(SDR0_MFR, mfr);
-
-	return  0;
-}
-
-
-/*************************************************************************
- *  int misc_init_r()
- *
- ************************************************************************/
-int misc_init_r(void)
-{
-	volatile epld_t *x = (epld_t *) CONFIG_SYS_EPLD_BASE;
-
-	/* set modes of operation */
-	x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 |
-		EPLD2_ETH_MODE_1000 | EPLD2_ETH_DUPLEX_MODE;
-	/* clear ETHERNET_AUTO_NEGO bit to turn on autonegotiation */
-	x->ethuart &= ~EPLD2_ETH_AUTO_NEGO;
-
-	/* put Ethernet+PHY in reset */
-	x->ethuart &= ~EPLD2_RESET_ETH_N;
-	udelay(10000);
-	/* take Ethernet+PHY out of reset */
-	x->ethuart |= EPLD2_RESET_ETH_N;
-
-	return  0;
-}
-
-
-/*************************************************************************
- *  int checkboard()
- *
- ************************************************************************/
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: Luan - AMCC PPC440SP Evaluation Board");
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return  0;
-}
-
-/*
- * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
- * board specific values.
- */
-u32 ddr_clktr(u32 default_val) {
-	return (SDRAM_CLKTR_CLKP_180_DEG_ADV);
-}
-
-/*************************************************************************
- *  hw_watchdog_reset
- *
- *	This routine is called to reset (keep alive) the watchdog timer
- *
- ************************************************************************/
-#if defined(CONFIG_HW_WATCHDOG)
-void hw_watchdog_reset(void)
-{
-}
-#endif
-
-
-/*************************************************************************
- *  int on_off()
- *
- ************************************************************************/
-static int on_off( const char *s )
-{
-	if (strcmp(s, "on") == 0) {
-		return  1;
-	} else if (strcmp(s, "off") == 0) {
-		return  0;
-	}
-	return  -1;
-}
-
-
-/*************************************************************************
- *  void l2cache_disable()
- *
- ************************************************************************/
-static void l2cache_disable(void)
-{
-	mtdcr( L2_CACHE_CFG, 0 );
-}
-
-
-/*************************************************************************
- *  void l2cache_enable()
- *
- ************************************************************************/
-static void l2cache_enable(void)	/* see p258 7.4.1 Enabling L2 Cache */
-{
-	mtdcr( L2_CACHE_CFG, 0x80000000 );	/* enable L2_MODE L2_CFG[L2M] */
-
-	mtdcr( L2_CACHE_ADDR, 0 );		/* set L2_ADDR with all zeros */
-
-	mtdcr( L2_CACHE_CMD, 0x80000000 );	/* issue HCLEAR command via L2_CMD */
-
-	while (!(mfdcr( L2_CACHE_STAT ) & 0x80000000 ))  ; /* poll L2_SR for completion */
-
-	mtdcr( L2_CACHE_CMD, 0x10000000 );	/* clear cache errors L2_CMD[CCP] */
-
-	mtdcr( L2_CACHE_CMD, 0x08000000 );	/* clear tag errors L2_CMD[CTE] */
-
-	mtdcr( L2_CACHE_SNP0, 0 );		/* snoop registers */
-	mtdcr( L2_CACHE_SNP1, 0 );
-
-	__asm__ volatile ("sync");		/* msync */
-
-	mtdcr( L2_CACHE_CFG, 0xe0000000 );	/* inst and data use L2 */
-
-	__asm__ volatile ("sync");
-}
-
-
-/*************************************************************************
- *  int l2cache_status()
- *
- ************************************************************************/
-static int l2cache_status(void)
-{
-	return  (mfdcr( L2_CACHE_CFG ) & 0x60000000) != 0;
-}
-
-
-/*************************************************************************
- *  int do_l2cache()
- *
- ************************************************************************/
-int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
-{
-	switch (argc) {
-	case 2:			/* on / off	*/
-		switch (on_off(argv[1])) {
-		case 0:	l2cache_disable();
-			break;
-		case 1:	l2cache_enable();
-			break;
-		}
-		/* FALL TROUGH */
-	case 1:			/* get status */
-		printf ("L2 Cache is %s\n",
-			l2cache_status() ? "ON" : "OFF");
-		return 0;
-	default:
-		return cmd_usage(cmdtp);
-	}
-
-	return  0;
-}
-
-
-U_BOOT_CMD(
-	l2cache,   2,   1,     do_l2cache,
-	"enable or disable L2 cache",
-	"[on, off]\n"
-	"    - enable or disable L2 cache"
-);
diff --git a/board/amcc/makalu/Kconfig b/board/amcc/makalu/Kconfig
deleted file mode 100644
index 31ce5f1..0000000
--- a/board/amcc/makalu/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MAKALU
-
-config SYS_BOARD
-	default "makalu"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "makalu"
-
-endif
diff --git a/board/amcc/makalu/MAINTAINERS b/board/amcc/makalu/MAINTAINERS
deleted file mode 100644
index ecd5e19..0000000
--- a/board/amcc/makalu/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MAKALU BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/makalu/
-F:	include/configs/makalu.h
-F:	configs/makalu_defconfig
diff --git a/board/amcc/makalu/Makefile b/board/amcc/makalu/Makefile
deleted file mode 100644
index dcf162c..0000000
--- a/board/amcc/makalu/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= makalu.o cmd_pll.o
-obj-y	+= init.o
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
deleted file mode 100644
index f12655b..0000000
--- a/board/amcc/makalu/cmd_pll.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * ehnus: change pll frequency.
- * Wed Sep  5 11:45:17 CST 2007
- * hsun@udtech.com.cn
- */
-
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <i2c.h>
-
-#ifdef CONFIG_CMD_EEPROM
-
-#define EEPROM_CONF_OFFSET		0
-#define EEPROM_TEST_OFFSET		16
-#define EEPROM_SDSTP_PARAM		16
-
-#define PLL_NAME_MAX			12
-#define BUF_STEP			8
-
-/* eeprom_wirtes 8Byte per op. */
-#define EEPROM_ALTER_FREQ(freq)						\
-	do {								\
-		int __i;						\
-		for (__i = 0; __i < 2; __i++)				\
-			eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR,		\
-				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
-				      pll_select[freq],			\
-				      BUF_STEP + __i*BUF_STEP);		\
-	} while (0)
-
-#define PDEBUG
-#ifdef	PDEBUG
-#define PLL_DEBUG	pll_debug(EEPROM_CONF_OFFSET)
-#else
-#define PLL_DEBUG
-#endif
-
-typedef enum {
-	PLL_ebc20,
-	PLL_333,
-	PLL_4001,
-	PLL_4002,
-	PLL_533,
-	PLL_600,
-	PLL_666,	/* For now, kilauea can't support */
-	RCONF,
-	WTEST,
-	PLL_TOTAL
-} pll_freq_t;
-
-static const char
-pll_name[][PLL_NAME_MAX] = {
-	"PLL_ebc20",
-	"PLL_333",
-	"PLL_400@1",
-	"PLL_400@2",
-	"PLL_533",
-	"PLL_600",
-	"PLL_666",
-	"RCONF",
-	"WTEST",
-	""
-};
-
-/*
- * ehnus:
- */
-static uchar
-pll_select[][EEPROM_SDSTP_PARAM] = {
-	/* 0: CPU 333MHz EBC 20MHz, for test only */
-	{
-		0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 0: 333 */
-	{
-		0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 1: 400_266 */
-	{
-		0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 2: 400 */
-	{
-		0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 3: 533 */
-	{
-		0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 4: 600 */
-	{
-		0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 5: 666 */
-	{
-		0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	{}
-};
-
-static uchar
-testbuf[EEPROM_SDSTP_PARAM] = {
-	0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
-	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
-};
-
-static void
-pll_debug(int off)
-{
-	int i;
-	uchar buffer[EEPROM_SDSTP_PARAM];
-
-	memset(buffer, 0, sizeof(buffer));
-	eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off,
-		    buffer, EEPROM_SDSTP_PARAM);
-
-	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
-	for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
-		printf("%02x ", buffer[i]);
-	printf("\n");
-}
-
-static void
-test_write(void)
-{
-	printf("Debug: test eeprom_write ... ");
-
-	/*
-	 * Write twice, 8 bytes per write
-	 */
-	eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
-		      testbuf, 8);
-	eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
-		      testbuf, 16);
-	printf("done\n");
-
-	pll_debug(EEPROM_TEST_OFFSET);
-}
-
-int
-do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char c = '\0';
-	pll_freq_t pll_freq;
-
-	if (argc < 2)
-		return cmd_usage(cmdtp);
-
-	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++) {
-		if (!strcmp(pll_name[pll_freq], argv[1]))
-			break;
-	}
-
-	switch (pll_freq) {
-	case PLL_ebc20:
-	case PLL_333:
-	case PLL_4001:
-	case PLL_4002:
-	case PLL_533:
-	case PLL_600:
-		EEPROM_ALTER_FREQ(pll_freq);
-		break;
-
-	case PLL_666:		/* not support */
-		printf("Choose this option will result in a boot failure."
-		       "\nContinue? (Y/N): ");
-
-		c = getc(); putc('\n');
-
-		if ((c == 'y') || (c == 'Y')) {
-			EEPROM_ALTER_FREQ(pll_freq);
-			break;
-		}
-		goto ret;
-
-	case RCONF:
-		pll_debug(EEPROM_CONF_OFFSET);
-		goto ret;
-	case WTEST:
-		printf("DEBUG: write test\n");
-		test_write();
-		goto ret;
-
-	default:
-		printf("Invalid options\n\n");
-		return cmd_usage(cmdtp);
-	}
-
-	printf("PLL set to %s, "
-	       "reset the board to take effect\n", pll_name[pll_freq]);
-
-	PLL_DEBUG;
-ret:
-	return 0;
-}
-
-U_BOOT_CMD(
-	pllalter, CONFIG_SYS_MAXARGS, 1,        do_pll_alter,
-	"change pll frequence",
-	"pllalter <selection>      - change pll frequence \n\n\
-	** New freq take effect after reset. ** \n\
-	----------------------------------------------\n\
-	PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	Same as PLL_333	\n\
-	\t	except          \n\
-	\t	EBC: 20 MHz     \n\
-	----------------------------------------------\n\
-	PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 666 MHz  \n\
-	\t	CPU: 333 MHz  \n\
-	\t	PLB: 166 MHz  \n\
-	\t	OPB: 83 MHz   \n\
-	\t	DDR: 83 MHz   \n\
-	------------------------------------------------\n\
-	PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 800 MHz  \n\
-	\t	CPU: 400 MHz  \n\
-	\t	PLB: 133 MHz  \n\
-	\t	OPB: 66  MHz  \n\
-	\t	DDR: 133 MHz  \n\
-	------------------------------------------------\n\
-	PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 800 MHz  \n\
-	\t	CPU: 400 MHz  \n\
-	\t	PLB: 200 MHz  \n\
-	\t	OPB: 100 MHz  \n\
-	\t	DDR: 200 MHz  \n\
-	----------------------------------------------\n\
-	PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 1066 MHz  \n\
-	\t	CPU: 533  MHz  \n\
-	\t	PLB: 177  MHz  \n\
-	\t	OPB: 88   MHz  \n\
-	\t	DDR: 177  MHz  \n\
-	----------------------------------------------\n\
-	PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 1200 MHz  \n\
-	\t	CPU: 600  MHz  \n\
-	\t	PLB: 200  MHz  \n\
-	\t	OPB: 100  MHz  \n\
-	\t	DDR: 200  MHz  \n\
-	----------------------------------------------\n\
-	PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 1333 MHz  \n\
-	\t	CPU: 666  MHz  \n\
-	\t	PLB: 166  MHz  \n\
-	\t	OPB: 83   MHz  \n\
-	\t	DDR: 166  MHz  \n\
-	-----------------------------------------------\n\
-	RCONF: Read current eeprom configuration.      \n\
-	-----------------------------------------------\n\
-	WTEST: Test EEPROM write with predefined values\n\
-	-----------------------------------------------"
-);
-
-#endif	/* CONFIG_CMD_EEPROM */
diff --git a/board/amcc/makalu/init.S b/board/amcc/makalu/init.S
deleted file mode 100644
index e15c622..0000000
--- a/board/amcc/makalu/init.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (c) 2008 Nuovation System Designs, LLC
- *   Grant Erickson <gerickson@nuovations.com>
- *
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Originally based on code provided from Senao and AMCC
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-	.globl  ext_bus_cntlr_init
-ext_bus_cntlr_init:
-	blr
diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c
deleted file mode 100644
index 2194942..0000000
--- a/board/amcc/makalu/makalu.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc405.h>
-#include <libfdt.h>
-#include <asm/processor.h>
-#include <asm/ppc4xx-gpio.h>
-#include <asm/io.h>
-#include <fdt_support.h>
-#include <linux/errno.h>
-
-#if defined(CONFIG_PCI)
-#include <pci.h>
-#include <asm/4xx_pcie.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*
- * Board early initialization function
- */
-int board_early_init_f (void)
-{
-	u32 val;
-
-	/*--------------------------------------------------------------------+
-	 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
-	 +--------------------------------------------------------------------+
-	+---------------------------------------------------------------------+
-	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
-	+---------+-----------------------------------+-------+-------+-------+
-	| IRQ 00  | UART0                             | High  | Level | Non   |
-	| IRQ 01  | UART1                             | High  | Level | Non   |
-	| IRQ 02  | IIC0                              | High  | Level | Non   |
-	| IRQ 03  | TBD                               | High  | Level | Non   |
-	| IRQ 04  | TBD                               | High  | Level | Non   |
-	| IRQ 05  | EBM                               | High  | Level | Non   |
-	| IRQ 06  | BGI                               | High  | Level | Non   |
-	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
-	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
-	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
-	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
-	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
-	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
-	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
-	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
-	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
-	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
-	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
-	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
-	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
-	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
-	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
-	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
-	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
-	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
-	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
-	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
-	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
-	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
-	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
-	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
-	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
-	|----------------------------------------------------------------------
-	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
-	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
-	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
-	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
-	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
-	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
-	| IRQ 38  | NDFC                              | High  | Level | Non   |
-	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
-	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
-	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
-	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
-	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
-	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
-	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
-	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
-	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
-	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
-	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
-	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
-	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
-	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
-	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
-	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
-	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
-	|----------------------------------------------------------------------
-	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
-	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
-	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
-	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
-	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
-	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
-	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
-	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
-	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
-	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
-	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
-	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
-	|---------------------------------------------------------------------
-	+---------+-----------------------------------+-------+-------+------*/
-	/*--------------------------------------------------------------------+
-	 | Initialise UIC registers.  Clear all interrupts.  Disable all
-	 | interrupts.
-	 | Set critical interrupt values.  Set interrupt polarities.  Set
-	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
-	 | interrupts again.
-	 +-------------------------------------------------------------------*/
-
-	mtdcr (UIC2SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC2ER, 0x00000000);	/* disable all interrupts */
-	mtdcr (UIC2CR, 0x00000000);	/* Set Critical / Non Critical interrupts */
-	mtdcr (UIC2PR, 0xf7ffffff);	/* Set Interrupt Polarities */
-	mtdcr (UIC2TR, 0x01e1fff8);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC2VR, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr (UIC2SR, 0x00000000);	/* clear all interrupts */
-	mtdcr (UIC2SR, 0xffffffff);	/* clear all interrupts */
-
-	mtdcr (UIC1SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC1ER, 0x00000000);	/* disable all interrupts */
-	mtdcr (UIC1CR, 0x00000000);	/* Set Critical / Non Critical interrupts */
-	mtdcr (UIC1PR, 0xfffac785);	/* Set Interrupt Polarities */
-	mtdcr (UIC1TR, 0x001d0040);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC1VR, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr (UIC1SR, 0x00000000);	/* clear all interrupts */
-	mtdcr (UIC1SR, 0xffffffff);	/* clear all interrupts */
-
-	mtdcr (UIC0SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC0ER, 0x0000000a);	/* Disable all interrupts */
-					/* Except cascade UIC0 and UIC1 */
-	mtdcr (UIC0CR, 0x00000000);	/* Set Critical / Non Critical interrupts */
-	mtdcr (UIC0PR, 0xffbfefef);	/* Set Interrupt Polarities */
-	mtdcr (UIC0TR, 0x00007000);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC0VR, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
-	mtdcr (UIC0SR, 0x00000000);	/* clear all interrupts */
-	mtdcr (UIC0SR, 0xffffffff);	/* clear all interrupts */
-
-	/*
-	 * Note: Some cores are still in reset when the chip starts, so
-	 * take them out of reset
-	 */
-	mtsdr(SDR0_SRST, 0);
-
-	/* Reset PCIe slots */
-	gpio_write_bit(CONFIG_SYS_GPIO_PCIE_RST, 0);
-	udelay(100);
-	gpio_write_bit(CONFIG_SYS_GPIO_PCIE_RST, 1);
-
-	/*
-	 * Configure PFC (Pin Function Control) registers
-	 * -> Enable USB
-	 */
-	val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
-	mtsdr(SDR0_PFC1, val);
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-#ifdef CONFIG_ENV_IS_IN_FLASH
-	/* Monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      -CONFIG_SYS_MONITOR_LEN,
-		      0xffffffff,
-		      &flash_info[0]);
-#endif
-
-	return 0;
-}
-
-int checkboard (void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: Makalu - AMCC PPC405EX Evaluation Board");
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return (0);
-}
diff --git a/board/amcc/redwood/Kconfig b/board/amcc/redwood/Kconfig
deleted file mode 100644
index d710590..0000000
--- a/board/amcc/redwood/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_REDWOOD
-
-config SYS_BOARD
-	default "redwood"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "redwood"
-
-endif
diff --git a/board/amcc/redwood/MAINTAINERS b/board/amcc/redwood/MAINTAINERS
deleted file mode 100644
index 756b301..0000000
--- a/board/amcc/redwood/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-REDWOOD BOARD
-M:	Feng Kan <fkan@amcc.com>
-S:	Maintained
-F:	board/amcc/redwood/
-F:	include/configs/redwood.h
-F:	configs/redwood_defconfig
diff --git a/board/amcc/redwood/Makefile b/board/amcc/redwood/Makefile
deleted file mode 100644
index 2bc632b..0000000
--- a/board/amcc/redwood/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2008
-# Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= redwood.o
-extra-y	+= init.o
diff --git a/board/amcc/redwood/config.mk b/board/amcc/redwood/config.mk
deleted file mode 100644
index 42b3e5f..0000000
--- a/board/amcc/redwood/config.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# (C) Copyright 2008
-# Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-#
-# AMCC 460SX Reference Platform (redwood) board
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/redwood/init.S b/board/amcc/redwood/init.S
deleted file mode 100644
index fd05130..0000000
--- a/board/amcc/redwood/init.S
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * (C) Copyright 2008
- * Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-	.section .bootpg,"ax"
-	.globl tlbtab
-tlbtab:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-	tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G)
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-	/* Although 512 KB, map 256k at a time */
-	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I)
-	tlbentry(CONFIG_SYS_ISRAM_BASE + 0x40000, SZ_256K, 0x00040000, 4, AC_RWX | SA_I)
-
-	tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_RWX | SA_IG)
-
-	/*
-	 * Peripheral base
-	 */
-	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_16K, 0xEF600000, 4, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE,SZ_16M, 0x00000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE,SZ_16M, 0x10000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE,SZ_16M, 0x20000000, 0xC, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCIE0_MEMBASE, SZ_256M, 0x00000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_MEMBASE, SZ_256M, 0x00000000, 0xE, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCIE0_REGBASE, SZ_64K, 0x30000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_REGBASE, SZ_64K, 0x30010000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_REGBASE, SZ_64K, 0x30020000, 0xC, AC_RW | SA_IG)
-	tlbtab_end
diff --git a/board/amcc/redwood/redwood.c b/board/amcc/redwood/redwood.c
deleted file mode 100644
index 15c3884..0000000
--- a/board/amcc/redwood/redwood.c
+++ /dev/null
@@ -1,440 +0,0 @@
-/*
- * This is the main board level file for the Redwood AMCC board.
- *
- * (C) Copyright 2008
- * Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include "redwood.h"
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#include <asm/io.h>
-
-int compare_to_true(char *str);
-char *remove_l_w_space(char *in_str);
-char *remove_t_w_space(char *in_str);
-int get_console_port(void);
-
-static void early_init_EBC(void);
-static int bootdevice_selected(void);
-static void early_reinit_EBC(int);
-static void early_init_UIC(void);
-
-/*
- * Define Boot devices
- */
-#define BOOT_FROM_8BIT_SRAM			0x00
-#define BOOT_FROM_16BIT_SRAM			0x01
-#define BOOT_FROM_32BIT_SRAM			0x02
-#define BOOT_FROM_8BIT_NAND			0x03
-#define BOOT_FROM_16BIT_NOR			0x04
-#define BOOT_DEVICE_UNKNOWN			0xff
-
-/*
- * EBC Devices Characteristics
- *   Peripheral Bank Access Parameters       -   EBC_BxAP
- *   Peripheral Bank Configuration Register  -   EBC_BxCR
- */
-
-/*
- * 8 bit width SRAM
- * BU Value
- * BxAP : 0x03800000  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
- * B0CR : 0xff098000  - BAS = ff0 - 100 11 00 0000000000000
- * B2CR : 0xe7098000  - BAS = e70 - 100 11 00 0000000000000
- */
-#define EBC_BXAP_8BIT_SRAM					\
-	EBC_BXAP_BME_DISABLED   | EBC_BXAP_TWT_ENCODE(7)  |	\
-	EBC_BXAP_BCE_DISABLE    | EBC_BXAP_BCT_2TRANS     |	\
-	EBC_BXAP_CSN_ENCODE(0)  | EBC_BXAP_OEN_ENCODE(0)  |	\
-	EBC_BXAP_WBN_ENCODE(0)  | EBC_BXAP_WBF_ENCODE(0)  |	\
-	EBC_BXAP_TH_ENCODE(0)   | EBC_BXAP_RE_DISABLED    |	\
-	EBC_BXAP_SOR_DELAYED    | EBC_BXAP_BEM_WRITEONLY  |	\
-	EBC_BXAP_PEN_DISABLED
-
-#define EBC_BXAP_16BIT_SRAM	EBC_BXAP_8BIT_SRAM
-#define EBC_BXAP_32BIT_SRAM	EBC_BXAP_8BIT_SRAM
-
-/*
- * NAND flash
- * BU Value
- * BxAP : 0x048ff240  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
- * B0CR : 0xff09a000  - BAS = ff0 - 100 11 01 0000000000000
- * B2CR : 0xe709a000  - BAS = e70 - 100 11 01 0000000000000
-*/
-#define EBC_BXAP_NAND						\
-	EBC_BXAP_BME_DISABLED   | EBC_BXAP_TWT_ENCODE(7)  |	\
-	EBC_BXAP_BCE_DISABLE    | EBC_BXAP_BCT_2TRANS     |	\
-	EBC_BXAP_CSN_ENCODE(0)  | EBC_BXAP_OEN_ENCODE(0)  |	\
-	EBC_BXAP_WBN_ENCODE(0)  | EBC_BXAP_WBF_ENCODE(0)  |	\
-	EBC_BXAP_TH_ENCODE(0)   | EBC_BXAP_RE_DISABLED    |	\
-	EBC_BXAP_SOR_DELAYED    | EBC_BXAP_BEM_WRITEONLY  |	\
-	EBC_BXAP_PEN_DISABLED
-
-/*
- * NOR flash
- * BU Value
- * BxAP : 0x048ff240  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
- * B0CR : 0xff09a000  - BAS = ff0 - 100 11 01 0000000000000
- * B2CR : 0xe709a000  - BAS = e70 - 100 11 01 0000000000000
-*/
-#define EBC_BXAP_NOR						\
-	EBC_BXAP_BME_DISABLED   | EBC_BXAP_TWT_ENCODE(7)  |	\
-	EBC_BXAP_BCE_DISABLE    | EBC_BXAP_BCT_2TRANS     |	\
-	EBC_BXAP_CSN_ENCODE(0)  | EBC_BXAP_OEN_ENCODE(0)  |	\
-	EBC_BXAP_WBN_ENCODE(0)  | EBC_BXAP_WBF_ENCODE(0)  |	\
-	EBC_BXAP_TH_ENCODE(0)   | EBC_BXAP_RE_DISABLED    |	\
-	EBC_BXAP_SOR_DELAYED    | EBC_BXAP_BEM_WRITEONLY  |	\
-	EBC_BXAP_PEN_DISABLED
-
-/*
- * FPGA
- * BU value :
- * B1AP = 0x05895240  - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000
- * B1CR = 0xe201a000  - BAS = e20 - 000 11 01 00000000000000
- */
-#define EBC_BXAP_FPGA						\
-	EBC_BXAP_BME_DISABLED   | EBC_BXAP_TWT_ENCODE(11) |	\
-	EBC_BXAP_BCE_DISABLE    | EBC_BXAP_BCT_2TRANS     |	\
-	EBC_BXAP_CSN_ENCODE(10) | EBC_BXAP_OEN_ENCODE(1)  |	\
-	EBC_BXAP_WBN_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(1)  |	\
-	EBC_BXAP_TH_ENCODE(1)   | EBC_BXAP_RE_DISABLED    |	\
-	EBC_BXAP_SOR_DELAYED    | EBC_BXAP_BEM_RW         |	\
-	EBC_BXAP_PEN_DISABLED
-
-#define EBC_BXCR_8BIT_SRAM_CS0						\
-	EBC_BXCR_BAS_ENCODE(0xFFE00000) | EBC_BXCR_BS_1MB           |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_8BIT
-
-#define EBC_BXCR_32BIT_SRAM_CS0						\
-	EBC_BXCR_BAS_ENCODE(0xFFC00000) | EBC_BXCR_BS_1MB           |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_32BIT
-
-#define EBC_BXCR_NAND_CS0						\
-	EBC_BXCR_BAS_ENCODE(0xFF000000) | EBC_BXCR_BS_16MB          |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_8BIT
-
-#define EBC_BXCR_16BIT_SRAM_CS0						\
-	EBC_BXCR_BAS_ENCODE(0xFFE00000) | EBC_BXCR_BS_2MB           |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_16BIT
-
-#define EBC_BXCR_NOR_CS0						\
-	EBC_BXCR_BAS_ENCODE(0xFF000000) | EBC_BXCR_BS_16MB          |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_16BIT
-
-#define EBC_BXCR_NOR_CS1						\
-	EBC_BXCR_BAS_ENCODE(0xE0000000) | EBC_BXCR_BS_128MB         |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_16BIT
-
-#define EBC_BXCR_NAND_CS1						\
-	EBC_BXCR_BAS_ENCODE(0xE0000000) | EBC_BXCR_BS_128MB         |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_8BIT
-
-#define EBC_BXCR_NAND_CS2						\
-	EBC_BXCR_BAS_ENCODE(0xC0000000) | EBC_BXCR_BS_128MB         |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_8BIT
-
-#define EBC_BXCR_SRAM_CS2						\
-	EBC_BXCR_BAS_ENCODE(0xC0000000) | EBC_BXCR_BS_4MB           |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_32BIT
-
-#define EBC_BXCR_LARGE_FLASH_CS2					\
-	EBC_BXCR_BAS_ENCODE(0xE7000000) | EBC_BXCR_BS_16MB          |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_16BIT
-
-#define EBC_BXCR_FPGA_CS3						\
-	EBC_BXCR_BAS_ENCODE(0xE2000000) | EBC_BXCR_BS_1MB           |	\
-	EBC_BXCR_BU_RW                  | EBC_BXCR_BW_16BIT
-
-/*****************************************************************************
- * UBOOT initiated board specific function calls
- ****************************************************************************/
-
-int board_early_init_f(void)
-{
-	int computed_boot_device = BOOT_DEVICE_UNKNOWN;
-
-	/*
-	 * Initialise EBC
-	 */
-	early_init_EBC();
-
-	/*
-	 * Determine which boot device was selected
-	 */
-	computed_boot_device = bootdevice_selected();
-
-	/*
-	 * Reinit EBC based on selected boot device
-	 */
-	early_reinit_EBC(computed_boot_device);
-
-	/*
-	 * Setup for UIC on 460SX redwood board
-	 */
-	early_init_UIC();
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: Redwood - AMCC 460SX Reference Board");
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-static void early_init_EBC(void)
-{
-	/*
-	 * Initialize EBC CONFIG -
-	 * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
-	 * default value :
-	 *      0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
-	 */
-	mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
-	      EBC_CFG_PTD_ENABLE |
-	      EBC_CFG_RTC_16PERCLK |
-	      EBC_CFG_ATC_PREVIOUS |
-	      EBC_CFG_DTC_PREVIOUS |
-	      EBC_CFG_CTC_PREVIOUS |
-	      EBC_CFG_OEO_PREVIOUS |
-	      EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_16);
-
-	/*
-	 * PART 1 : Initialize EBC Bank 3
-	 * ==============================
-	 * Bank1 is always associated to the EPLD.
-	 * It has to be initialized prior to other banks settings computation
-	 * since some board registers values may be needed to determine the
-	 * boot type
-	 */
-	mtebc(PB1AP, EBC_BXAP_FPGA);
-	mtebc(PB1CR, EBC_BXCR_FPGA_CS3);
-
-}
-
-static int bootdevice_selected(void)
-{
-	unsigned long sdr0_pinstp;
-	unsigned long bootstrap_settings;
-	int computed_boot_device = BOOT_DEVICE_UNKNOWN;
-
-	/*
-	 *  Determine which boot device was selected
-	 *  =================================================
-	 *
-	 *  Read Pin Strap Register in PPC460SX
-	 *  Result can either be :
-	 *   - Boot strap = boot from EBC 8bits     => Small Flash
-	 *   - Boot strap = boot from PCI
-	 *   - Boot strap = IIC
-	 *  In case of boot from IIC, read Serial Device Strap Register1
-	 *
-	 *  Result can either be :
-	 *   - Boot from EBC  - EBC Bus Width = 8bits    => Small Flash
-	 *   - Boot from EBC  - EBC Bus Width = 16bits   => Large Flash or SRAM
-	 *   - Boot from PCI
-	 */
-
-	/* Read Pin Strap Register in PPC460SX */
-	mfsdr(SDR0_PINSTP, sdr0_pinstp);
-	bootstrap_settings = sdr0_pinstp & SDR0_PSTRP0_BOOTSTRAP_MASK;
-
-	switch (bootstrap_settings) {
-	case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
-		/*
-		 * Boot from SRAM, 8bit width
-		 */
-		computed_boot_device = BOOT_FROM_8BIT_SRAM;
-		break;
-	case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1:
-		/*
-		 * Boot from SRAM, 32bit width
-		 */
-		computed_boot_device = BOOT_FROM_32BIT_SRAM;
-		break;
-	case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2:
-		/*
-		 * Boot from NAND, 8bit width
-		 */
-		computed_boot_device = BOOT_FROM_8BIT_NAND;
-		break;
-	case SDR0_PSTRP0_BOOTSTRAP_SETTINGS4:
-		/*
-		 * Boot from SRAM, 16bit width
-		 * Boot setting in IIC EEPROM 0x50
-		 */
-		computed_boot_device = BOOT_FROM_16BIT_SRAM;
-		break;
-	case SDR0_PSTRP0_BOOTSTRAP_SETTINGS5:
-		/*
-		 * Boot from NOR, 16bit width
-		 * Boot setting in IIC EEPROM 0x54
-		 */
-		computed_boot_device = BOOT_FROM_16BIT_NOR;
-		break;
-	default:
-		/* should not be */
-		computed_boot_device = BOOT_DEVICE_UNKNOWN;
-		break;
-	}
-
-	return computed_boot_device;
-}
-
-static void early_reinit_EBC(int computed_boot_device)
-{
-	/*
-	 *  Compute EBC settings depending on selected boot device
-	 *  ======================================================
-	 *
-	 * Resulting EBC init will be among following configurations :
-	 *
-	 *  - Boot from EBC 8bits => boot from Small Flash selected
-	 *            EBC-CS0     = Small Flash
-	 *            EBC-CS2     = Large Flash and SRAM
-	 *
-	 *  - Boot from EBC 16bits => boot from Large Flash or SRAM
-	 *            EBC-CS0     = Large Flash or SRAM
-	 *            EBC-CS2     = Small Flash
-	 *
-	 *  - Boot from PCI
-	 *            EBC-CS0     = not initialized to avoid address contention
-	 *            EBC-CS2     = same as boot from Small Flash selected
-	 */
-
-	unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0;
-	unsigned long ebc0_cs1_bxap_value = 0, ebc0_cs1_bxcr_value = 0;
-	unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0;
-
-	switch (computed_boot_device) {
-		/*-------------------------------------------------------------------*/
-	case BOOT_FROM_8BIT_SRAM:
-		/*-------------------------------------------------------------------*/
-		ebc0_cs0_bxap_value = EBC_BXAP_8BIT_SRAM;
-		ebc0_cs0_bxcr_value = EBC_BXCR_8BIT_SRAM_CS0;
-		ebc0_cs1_bxap_value = EBC_BXAP_NOR;
-		ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
-		ebc0_cs2_bxap_value = EBC_BXAP_NAND;
-		ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
-		break;
-
-		/*-------------------------------------------------------------------*/
-	case BOOT_FROM_16BIT_SRAM:
-		/*-------------------------------------------------------------------*/
-		ebc0_cs0_bxap_value = EBC_BXAP_16BIT_SRAM;
-		ebc0_cs0_bxcr_value = EBC_BXCR_16BIT_SRAM_CS0;
-		ebc0_cs1_bxap_value = EBC_BXAP_NOR;
-		ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
-		ebc0_cs2_bxap_value = EBC_BXAP_NAND;
-		ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
-		break;
-
-		/*-------------------------------------------------------------------*/
-	case BOOT_FROM_32BIT_SRAM:
-		/*-------------------------------------------------------------------*/
-		ebc0_cs0_bxap_value = EBC_BXAP_32BIT_SRAM;
-		ebc0_cs0_bxcr_value = EBC_BXCR_32BIT_SRAM_CS0;
-		ebc0_cs1_bxap_value = EBC_BXAP_NOR;
-		ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
-		ebc0_cs2_bxap_value = EBC_BXAP_NAND;
-		ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
-		break;
-
-		/*-------------------------------------------------------------------*/
-	case BOOT_FROM_16BIT_NOR:
-		/*-------------------------------------------------------------------*/
-		ebc0_cs0_bxap_value = EBC_BXAP_NOR;
-		ebc0_cs0_bxcr_value = EBC_BXCR_NOR_CS0;
-		ebc0_cs1_bxap_value = EBC_BXAP_NAND;
-		ebc0_cs1_bxcr_value = EBC_BXCR_NAND_CS1;
-		ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM;
-		ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2;
-		break;
-
-		/*-------------------------------------------------------------------*/
-	case BOOT_FROM_8BIT_NAND:
-		/*-------------------------------------------------------------------*/
-		ebc0_cs0_bxap_value = EBC_BXAP_NAND;
-		ebc0_cs0_bxcr_value = EBC_BXCR_NAND_CS0;
-		ebc0_cs1_bxap_value = EBC_BXAP_NOR;
-		ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
-		ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM;
-		ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2;
-		break;
-
-		/*-------------------------------------------------------------------*/
-	default:
-		/*-------------------------------------------------------------------*/
-		/* BOOT_DEVICE_UNKNOWN */
-		break;
-	}
-
-	mtebc(PB0AP, ebc0_cs0_bxap_value);
-	mtebc(PB0CR, ebc0_cs0_bxcr_value);
-	mtebc(PB1AP, ebc0_cs1_bxap_value);
-	mtebc(PB1CR, ebc0_cs1_bxcr_value);
-	mtebc(PB2AP, ebc0_cs2_bxap_value);
-	mtebc(PB2CR, ebc0_cs2_bxcr_value);
-}
-
-static void early_init_UIC(void)
-{
-	/*
-	 * Initialise UIC registers.  Clear all interrupts.  Disable all
-	 * interrupts.
-	 * Set critical interrupt values.  Set interrupt polarities.  Set
-	 * interrupt trigger levels.  Make bit 0 High  priority.  Clear all
-	 * interrupts again.
-	 */
-	mtdcr(UIC3SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr(UIC3ER, 0x00000000);	/* disable all interrupts */
-	mtdcr(UIC3CR, 0x00000000);	/* Set Critical / Non Critical
-					 * interrupts */
-	mtdcr(UIC3PR, 0xffffffff);	/* Set Interrupt Polarities */
-	mtdcr(UIC3TR, 0x001fffff);	/* Set Interrupt Trigger Levels */
-	mtdcr(UIC3VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all  interrupts */
-
-	mtdcr(UIC2SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr(UIC2ER, 0x00000000);	/* disable all interrupts */
-	mtdcr(UIC2CR, 0x00000000);	/* Set Critical / Non Critical
-					 * interrupts */
-	mtdcr(UIC2PR, 0xebebebff);	/* Set Interrupt Polarities */
-	mtdcr(UIC2TR, 0x74747400);	/* Set Interrupt Trigger Levels */
-	mtdcr(UIC2VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all interrupts */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all interrupts */
-	mtdcr(UIC1CR, 0x00000000);	/* Set Critical / Non Critical
-					 * interrupts */
-	mtdcr(UIC1PR, 0xffffffff);	/* Set Interrupt Polarities */
-	mtdcr(UIC1TR, 0x001fc0ff);	/* Set Interrupt Trigger Levels */
-	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all interrupts */
-
-	mtdcr(UIC0SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all interrupts excepted
-					 * cascade to be checked */
-	mtdcr(UIC0CR, 0x00104001);	/* Set Critical / Non Critical
-					 * interrupts */
-	mtdcr(UIC0PR, 0xffffffff);	/* Set Interrupt Polarities */
-	mtdcr(UIC0TR, 0x000f003c);	/* Set Interrupt Trigger Levels */
-	mtdcr(UIC0VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all interrupts */
-
-}
diff --git a/board/amcc/redwood/redwood.h b/board/amcc/redwood/redwood.h
deleted file mode 100644
index 9c36073..0000000
--- a/board/amcc/redwood/redwood.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2008
- * Feng Kan, Applied Micro Circuit Corp., fkan@amcc.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __REDWOOD_H_
-#define __REDWOOD_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*----------------------------------------------------------------------------+
-| Defines
-+----------------------------------------------------------------------------*/
-/* Pin Straps Reg */
-#define SDR0_PSTRP0			0x0040
-#define SDR0_PSTRP0_BOOTSTRAP_MASK	0xE0000000	/* Strap Bits */
-
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0	0x00000000	/* Default strap settings 0 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1	0x20000000	/* Default strap settings 1 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2	0x40000000	/* Default strap settings 2 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3	0x60000000	/* Default strap settings 3 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4	0x80000000	/* Default strap settings 4 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5	0xA0000000	/* Default strap settings 5 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6	0xC0000000	/* Default strap settings 6 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7	0xE0000000	/* Default strap settings 7 */
-
-#ifdef __cplusplus
-}
-#endif
-#endif				/* __REDWOOD_H_ */
diff --git a/board/amcc/sequoia/Kconfig b/board/amcc/sequoia/Kconfig
deleted file mode 100644
index 67ee3ca..0000000
--- a/board/amcc/sequoia/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_SEQUOIA
-
-config SYS_BOARD
-	default "sequoia"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "sequoia"
-
-endif
diff --git a/board/amcc/sequoia/MAINTAINERS b/board/amcc/sequoia/MAINTAINERS
deleted file mode 100644
index 6c28a37..0000000
--- a/board/amcc/sequoia/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-SEQUOIA BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/sequoia/
-F:	include/configs/sequoia.h
-F:	configs/rainier_defconfig
-F:	configs/rainier_ramboot_defconfig
-F:	configs/sequoia_defconfig
-F:	configs/sequoia_ramboot_defconfig
diff --git a/board/amcc/sequoia/Makefile b/board/amcc/sequoia/Makefile
deleted file mode 100644
index b4ab5da..0000000
--- a/board/amcc/sequoia/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= sequoia.o sdram.o
-obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
-extra-y	+= init.o
diff --git a/board/amcc/sequoia/chip_config.c b/board/amcc/sequoia/chip_config.c
deleted file mode 100644
index eef9316..0000000
--- a/board/amcc/sequoia/chip_config.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx_config.h>
-
-struct ppc4xx_config ppc4xx_config_val[] = {
-	{
-		"333-133-nor", "NOR  CPU: 333 PLB: 133 OPB:  66 EBC:  66",
-		{
-			0x84, 0x70, 0xa2, 0xa6, 0x05, 0x57, 0xa0, 0x10,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"333-166-nor", "NOR  CPU: 333 PLB: 166 OPB:  83 EBC:  55",
-		{
-			0xc7, 0x78, 0xf3, 0x4e, 0x05, 0xd7, 0xa0, 0x30,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"333-166-nand", "NAND CPU: 333 PLB: 166 OPB:  83 EBC:  55",
-		{
-			0xc7, 0x78, 0xf3, 0x4e, 0x05, 0xd7, 0xd0, 0x30,
-			0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"400-133-nor", "NOR  CPU: 400 PLB: 133 OPB:  66 EBC:  66",
-		{
-			0x86, 0x78, 0xc2, 0xc6, 0x05, 0x57, 0xa0, 0x30,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"400-160-nor", "NOR  CPU: 400 PLB: 160 OPB:  80 EBC:  53",
-		{
-			0x86, 0x78, 0xc2, 0xa6, 0x05, 0xd7, 0xa0, 0x10,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"416-166-nor", "NOR  CPU: 416 PLB: 166 OPB:  83 EBC:  55",
-		{
-			0xc6, 0x78, 0x52, 0xa6, 0x05, 0xd7, 0xa0, 0x10,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"416-166-nand", "NAND CPU: 416 PLB: 166 OPB:  83 EBC:  55",
-		{
-			0xc6, 0x78, 0x52, 0xa6, 0x05, 0xd7, 0xd0, 0x10,
-			0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"500-166-nor", "NOR  CPU: 500 PLB: 166 OPB:  83 EBC:  55",
-		{
-			0xc7, 0x78, 0x52, 0xc6, 0x05, 0xd7, 0xa0, 0x30,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"500-166-nand", "NAND CPU: 500 PLB: 166 OPB:  83 EBC:  55",
-		{
-			0xc7, 0x78, 0x52, 0xc6, 0x05, 0xd7, 0xd0, 0x30,
-			0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"533-133-nor", "NOR  CPU: 533 PLB: 133 OPB:  66 EBC:  66",
-		{
-			0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"667-133-nor", "NOR  CPU: 667 PLB: 133 OPB:  66 EBC:  66",
-		{
-			0x87, 0x78, 0xa2, 0x56, 0x09, 0x57, 0xa0, 0x30,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"667-166-nor", "NOR  CPU: 667 PLB: 166 OPB:  83 EBC:  55",
-		{
-			0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"667-166-nand", "NAND CPU: 667 PLB: 166 OPB:  83 EBC:  55",
-		{
-			0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xd0, 0x30,
-			0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-};
-
-int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk
deleted file mode 100644
index 824e78f..0000000
--- a/board/amcc/sequoia/config.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# (C) Copyright 2002-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-#
-# AMCC 440EPx Reference Platform (Sequoia) board
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
deleted file mode 100644
index f876639..0000000
--- a/board/amcc/sequoia/init.S
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <ppc_asm.tmpl>
-#include <asm/mmu.h>
-#include <config.h>
-
-/*
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- */
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	/* vxWorks needs this as first entry for the Machine Check interrupt */
-	tlbentry( 0x40000000, SZ_256M, 0, 0, AC_RWX | SA_IG )
-
-	/*
-	 * The RAM-boot version skips the SDRAM TLB (identified by EPN=0). This
-	 * entry is already configured for SDRAM via the JTAG debugger and mustn't
-	 * be re-initialized by this RAM-booting U-Boot version.
-	 */
-#ifndef CONFIG_SYS_RAMBOOT
-	/* TLB-entry for DDR SDRAM (Up to 2GB) */
-#ifdef CONFIG_4xx_DCACHE
-	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_G)
-#else
-	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG )
-#endif
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	/* TLB-entry for EBC */
-	tlbentry( CONFIG_SYS_BCSR_BASE, SZ_256M, CONFIG_SYS_BCSR_BASE, 1, AC_RWX | SA_IG )
-
-	/* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G )
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
-	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G )
-#endif
-
-	/* TLB-entry for PCI Memory */
-	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_RW | SA_IG )
-	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_RW | SA_IG )
-	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_RW | SA_IG )
-	tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_RW | SA_IG )
-
-	/* TLB-entry for NAND */
-	tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_RWX | SA_IG )
-
-	/* TLB-entry for Internal Registers & OCM */
-	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_RWX | SA_I )
-
-	/*TLB-entry PCI registers*/
-	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_RWX | SA_IG )
-
-	/* TLB-entry for peripherals */
-	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_RWX | SA_IG)
-
-	/* TLB-entry PCI IO Space - from sr@denx.de */
-	tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_RWX | SA_IG)
-
-	tlbtab_end
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
deleted file mode 100644
index ea98717..0000000
--- a/board/amcc/sequoia/sdram.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * (C) Copyright 2006
- * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * (C) Copyright 2006-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* define DEBUG for debug output */
-#undef DEBUG
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc440.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*-----------------------------------------------------------------------------+
- * Prototypes
- *-----------------------------------------------------------------------------*/
-extern int denali_wait_for_dlllock(void);
-extern void denali_core_search_data_eye(void);
-
-/*************************************************************************
- *
- * dram_init -- 440EPx's DDR controller is a DENALI Core
- *
- ************************************************************************/
-int dram_init(void)
-{
-#if !defined(CONFIG_SYS_RAMBOOT)
-	ulong speed = get_bus_freq(0);
-
-	mtsdram(DDR0_02, 0x00000000);
-
-	mtsdram(DDR0_00, 0x0000190A);
-	mtsdram(DDR0_01, 0x01000000);
-	mtsdram(DDR0_03, 0x02030602);
-	mtsdram(DDR0_04, 0x0A020200);
-	mtsdram(DDR0_05, 0x02020308);
-	mtsdram(DDR0_06, 0x0102C812);
-	mtsdram(DDR0_07, 0x000D0100);
-	mtsdram(DDR0_08, 0x02430001);
-	mtsdram(DDR0_09, 0x00011D5F);
-	mtsdram(DDR0_10, 0x00000100);
-	mtsdram(DDR0_11, 0x0027C800);
-	mtsdram(DDR0_12, 0x00000003);
-	mtsdram(DDR0_14, 0x00000000);
-	mtsdram(DDR0_17, 0x19000000);
-	mtsdram(DDR0_18, 0x19191919);
-	mtsdram(DDR0_19, 0x19191919);
-	mtsdram(DDR0_20, 0x0B0B0B0B);
-	mtsdram(DDR0_21, 0x0B0B0B0B);
-	mtsdram(DDR0_22, 0x00267F0B);
-	mtsdram(DDR0_23, 0x00000000);
-	mtsdram(DDR0_24, 0x01010002);
-	if (speed > 133333334)
-		mtsdram(DDR0_26, 0x5B26050C);
-	else
-		mtsdram(DDR0_26, 0x5B260408);
-	mtsdram(DDR0_27, 0x0000682B);
-	mtsdram(DDR0_28, 0x00000000);
-	mtsdram(DDR0_31, 0x00000000);
-	mtsdram(DDR0_42, 0x01000006);
-	mtsdram(DDR0_43, 0x030A0200);
-	mtsdram(DDR0_44, 0x00000003);
-	mtsdram(DDR0_02, 0x00000001);
-
-	denali_wait_for_dlllock();
-#endif /* #ifndef CONFIG_SYS_RAMBOOT */
-
-#ifdef CONFIG_DDR_DATA_EYE
-	/* -----------------------------------------------------------+
-	 * Perform data eye search if requested.
-	 * ----------------------------------------------------------*/
-	denali_core_search_data_eye();
-#endif
-
-	/*
-	 * Clear possible errors resulting from data-eye-search.
-	 * If not done, then we could get an interrupt later on when
-	 * exceptions are enabled.
-	 */
-	set_mcsr(get_mcsr());
-
-	gd->ram_size = CONFIG_SYS_MBYTES_SDRAM << 20;
-
-	return 0;
-}
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
deleted file mode 100644
index 1e45774..0000000
--- a/board/amcc/sequoia/sequoia.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * (C) Copyright 2006-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <errno.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc4xx-gpio.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/bitops.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_MTD_NOR_FLASH)
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-#endif
-
-extern void __ft_board_setup(void *blob, bd_t *bd);
-ulong flash_get_size(ulong base, int banknum);
-
-static inline u32 get_async_pci_freq(void)
-{
-	if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) &
-		CONFIG_SYS_BCSR5_PCI66EN)
-		return 66666666;
-	else
-		return 33333333;
-}
-
-int board_early_init_f(void)
-{
-	u32 sdr0_cust0;
-	u32 sdr0_pfc1, sdr0_pfc2;
-	u32 reg;
-
-	mtdcr(EBC0_CFGADDR, EBC0_CFG);
-	mtdcr(EBC0_CFGDATA, 0xb8400000);
-
-	/*
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000005);	/* ATI & UIC1 crit are critical */
-	mtdcr(UIC0PR, 0xfffff7ff);	/* per ref-board manual */
-	mtdcr(UIC0TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC0VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC1TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC2ER, 0x00000000);	/* disable all */
-	mtdcr(UIC2CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC2PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC2TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC2VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-
-	/* Check and reconfigure the PCI sync clock if necessary */
-	ppc4xx_pci_sync_clock_config(get_async_pci_freq());
-
-	/* 50MHz tmrclk */
-	out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x04, 0x00);
-
-	/* clear write protects */
-	out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x07, 0x00);
-
-	/* enable Ethernet */
-	out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x08, 0x00);
-
-	/* enable USB device */
-	out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x09, 0x20);
-
-	/* select Ethernet (and optionally IIC1) pins */
-	mfsdr(SDR0_PFC1, sdr0_pfc1);
-	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
-		SDR0_PFC1_SELECT_CONFIG_4;
-#ifdef CONFIG_I2C_MULTI_BUS
-	sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL);
-#endif
-	/* Two UARTs, so we need 4-pin mode.  Also, we want CTS/RTS mode. */
-	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS;
-	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_CTS_RTS;
-	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_CTS_RTS;
-
-	mfsdr(SDR0_PFC2, sdr0_pfc2);
-	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
-		SDR0_PFC2_SELECT_CONFIG_4;
-	mtsdr(SDR0_PFC2, sdr0_pfc2);
-	mtsdr(SDR0_PFC1, sdr0_pfc1);
-
-	/* PCI arbiter enabled */
-	mfsdr(SDR0_PCI0, reg);
-	mtsdr(SDR0_PCI0, 0x80000000 | reg);
-
-	/* setup NAND FLASH */
-	mfsdr(SDR0_CUST0, sdr0_cust0);
-	sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL	|
-		SDR0_CUST0_NDFC_ENABLE		|
-		SDR0_CUST0_NDFC_BW_8_BIT	|
-		SDR0_CUST0_NDFC_ARE_MASK	|
-		(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
-	mtsdr(SDR0_CUST0, sdr0_cust0);
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-#if defined(CONFIG_MTD_NOR_FLASH)
-	uint pbcr;
-	int size_val = 0;
-#endif
-#ifdef CONFIG_440EPX
-	unsigned long usb2d0cr = 0;
-	unsigned long usb2phy0cr, usb2h0cr = 0;
-	unsigned long sdr0_pfc1;
-	char *act = getenv("usbact");
-#endif
-	u32 reg;
-
-#if defined(CONFIG_MTD_NOR_FLASH)
-	/* Re-do flash sizing to get full correct info */
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-#if defined(CONFIG_SYS_RAMBOOT)
-	mtdcr(EBC0_CFGADDR, PB3CR);
-#else
-	mtdcr(EBC0_CFGADDR, PB0CR);
-#endif
-	pbcr = mfdcr(EBC0_CFGDATA);
-	size_val = ffs(gd->bd->bi_flashsize) - 21;
-	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-#if defined(CONFIG_SYS_RAMBOOT)
-	mtdcr(EBC0_CFGADDR, PB3CR);
-#else
-	mtdcr(EBC0_CFGADDR, PB0CR);
-#endif
-	mtdcr(EBC0_CFGDATA, pbcr);
-
-	/*
-	 * Re-check to get correct base address
-	 */
-	flash_get_size(gd->bd->bi_flashstart, 0);
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CONFIG_SYS_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	/* Env protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    CONFIG_ENV_ADDR_REDUND,
-			    CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
-			    &flash_info[0]);
-#endif
-#endif /* CONFIG_MTD_NOR_FLASH */
-
-	/*
-	 * USB suff...
-	 */
-#ifdef CONFIG_440EPX
-	if (act == NULL || strcmp(act, "hostdev") == 0) {
-		/* SDR Setting */
-		mfsdr(SDR0_PFC1, sdr0_pfc1);
-		mfsdr(SDR0_USB2D0CR, usb2d0cr);
-		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mfsdr(SDR0_USB2H0CR, usb2h0cr);
-
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
-
-		/*
-		 * An 8-bit/60MHz interface is the only possible alternative
-		 * when connecting the Device to the PHY
-		 */
-		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
-
-		/*
-		 * To enable the USB 2.0 Device function
-		 * through the UTMI interface
-		 */
-		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;
-
-		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
-		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;
-
-		mtsdr(SDR0_PFC1, sdr0_pfc1);
-		mtsdr(SDR0_USB2D0CR, usb2d0cr);
-		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mtsdr(SDR0_USB2H0CR, usb2h0cr);
-
-		/*clear resets*/
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x00000000);
-		udelay (1000);
-		mtsdr(SDR0_SRST0, 0x00000000);
-
-		printf("USB:   Host(int phy) Device(ext phy)\n");
-
-	} else if (strcmp(act, "dev") == 0) {
-		/*-------------------PATCH-------------------------------*/
-		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
-		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x672c6000);
-
-		udelay (1000);
-		mtsdr(SDR0_SRST0, 0x00000080);
-
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x60206000);
-
-		*(unsigned int *)(0xe0000350) = 0x00000001;
-
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x60306000);
-		/*-------------------PATCH-------------------------------*/
-
-		/* SDR Setting */
-		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mfsdr(SDR0_USB2H0CR, usb2h0cr);
-		mfsdr(SDR0_USB2D0CR, usb2d0cr);
-		mfsdr(SDR0_PFC1, sdr0_pfc1);
-
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
-
-		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
-
-		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;
-
-		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
-		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
-
-		mtsdr(SDR0_USB2H0CR, usb2h0cr);
-		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mtsdr(SDR0_USB2D0CR, usb2d0cr);
-		mtsdr(SDR0_PFC1, sdr0_pfc1);
-
-		/* clear resets */
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x00000000);
-		udelay (1000);
-		mtsdr(SDR0_SRST0, 0x00000000);
-
-		printf("USB:   Device(int phy)\n");
-	}
-#endif /* CONFIG_440EPX */
-
-	mfsdr(SDR0_SRST1, reg);		/* enable security/kasumi engines */
-	reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
-	mtsdr(SDR0_SRST1, reg);
-
-	/*
-	 * Clear PLB4A0_ACR[WRP]
-	 * This fix will make the MAL burst disabling patch for the Linux
-	 * EMAC driver obsolete.
-	 */
-	reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
-	mtdcr(PLB4A0_ACR, reg);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-	u8 rev;
-	u32 clock = get_async_pci_freq();
-
-#ifdef CONFIG_440EPX
-	printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
-#else
-	printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
-#endif
-
-	rev = in_8((void *)(CONFIG_SYS_BCSR_BASE + 0));
-	printf(", Rev. %X, PCI-Async=%d MHz", rev, clock / 1000000);
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	/*
-	 * Reconfiguration of the PCI sync clock is already done,
-	 * now check again if everything is in range:
-	 */
-	if (ppc4xx_pci_sync_clock_config(clock)) {
-		printf("ERROR: PCI clocking incorrect (async=%d "
-		       "sync=%ld)!\n", clock, get_PCI_freq());
-	}
-
-	return (0);
-}
-
-#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
-/*
- * Assign interrupts to PCI devices.
- */
-void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
-	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2);
-}
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
-/*
- * On NAND-booting sequoia, we need to patch the chips select numbers
- * in the dtb (CS0 - NAND, CS3 - NOR)
- */
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	int rc;
-	int len;
-	int nodeoffset;
-	struct fdt_property *prop;
-	u32 *reg;
-	char path[32];
-
-	/* First do common fdt setup */
-	__ft_board_setup(blob, bd);
-
-	/* And now configure NOR chip select to 3 instead of 0 */
-	strcpy(path, "/plb/opb/ebc/nor_flash@0,0");
-	nodeoffset = fdt_path_offset(blob, path);
-	prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
-	if (prop == NULL) {
-		printf("Unable to update NOR chip select for NAND booting\n");
-		return -FDT_ERR_NOTFOUND;
-	}
-	reg = (u32 *)&prop->data[0];
-	reg[0] = 3;
-	rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1);
-	if (rc) {
-		printf("Unable to update property NOR mappings\n");
-		return rc;
-	}
-
-	/* And now configure NAND chip select to 0 instead of 3 */
-	strcpy(path, "/plb/opb/ebc/ndfc@3,0");
-	nodeoffset = fdt_path_offset(blob, path);
-	prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
-	if (prop == NULL) {
-		printf("Unable to update NDFC chip select for NAND booting\n");
-		return len;
-	}
-	reg = (u32 *)&prop->data[0];
-	reg[0] = 0;
-	rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1);
-	if (rc) {
-		printf("Unable to update property NDFC mapping\n");
-		return rc;
-	}
-
-	return 0;
-}
-#endif /* CONFIG_SYS_RAMBOOT */
diff --git a/board/amcc/sequoia/u-boot-ram.lds b/board/amcc/sequoia/u-boot-ram.lds
deleted file mode 100644
index ef08be8..0000000
--- a/board/amcc/sequoia/u-boot-ram.lds
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    arch/powerpc/cpu/ppc4xx/start.o	(.text*)
-    board/amcc/sequoia/init.o		(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    KEEP(*(.got))
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/amcc/walnut/Kconfig b/board/amcc/walnut/Kconfig
deleted file mode 100644
index 94e3dc9..0000000
--- a/board/amcc/walnut/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_WALNUT
-
-config SYS_BOARD
-	default "walnut"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "walnut"
-
-endif
diff --git a/board/amcc/walnut/MAINTAINERS b/board/amcc/walnut/MAINTAINERS
deleted file mode 100644
index 2a98c85..0000000
--- a/board/amcc/walnut/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-WALNUT BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/walnut/
-F:	include/configs/walnut.h
-F:	configs/sycamore_defconfig
-F:	configs/walnut_defconfig
diff --git a/board/amcc/walnut/Makefile b/board/amcc/walnut/Makefile
deleted file mode 100644
index 9228170..0000000
--- a/board/amcc/walnut/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= walnut.o flash.o
diff --git a/board/amcc/walnut/flash.c b/board/amcc/walnut/flash.c
deleted file mode 100644
index cc0f425..0000000
--- a/board/amcc/walnut/flash.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * (C) Copyright 2000-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif				/* DEBUG */
-
-/*
- * include common flash code (for amcc boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-
-unsigned long flash_init(void)
-{
-	unsigned long size_b0, size_b1;
-	int i;
-	uint pbcr;
-	unsigned long base_b0, base_b1;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 =
-	    flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-		       size_b0, size_b0 << 20);
-	}
-
-	/* Only one bank */
-	if (CONFIG_SYS_MAX_FLASH_BANKS == 1) {
-		/* Setup offsets */
-		flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
-
-		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET,
-				    CONFIG_SYS_MONITOR_BASE,
-				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
-				    &flash_info[0]);
-#ifdef CONFIG_ENV_IS_IN_FLASH
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
-				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[0]);
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
-				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[0]);
-#endif
-
-		size_b1 = 0;
-		flash_info[0].size = size_b0;
-	} else {
-		/* 2 banks */
-		size_b1 =
-		    flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
-				   &flash_info[1]);
-
-		/* Re-do sizing to get full correct info */
-
-		if (size_b1) {
-			mtdcr(EBC0_CFGADDR, PB0CR);
-			pbcr = mfdcr(EBC0_CFGDATA);
-			mtdcr(EBC0_CFGADDR, PB0CR);
-			base_b1 = -size_b1;
-			pbcr =
-			    (pbcr & 0x0001ffff) | base_b1 |
-			    (((size_b1 / 1024 / 1024) - 1) << 17);
-			mtdcr(EBC0_CFGDATA, pbcr);
-			/*          printf("PB1CR = %x\n", pbcr); */
-		}
-
-		if (size_b0) {
-			mtdcr(EBC0_CFGADDR, PB1CR);
-			pbcr = mfdcr(EBC0_CFGDATA);
-			mtdcr(EBC0_CFGADDR, PB1CR);
-			base_b0 = base_b1 - size_b0;
-			pbcr =
-			    (pbcr & 0x0001ffff) | base_b0 |
-			    (((size_b0 / 1024 / 1024) - 1) << 17);
-			mtdcr(EBC0_CFGDATA, pbcr);
-			/*            printf("PB0CR = %x\n", pbcr); */
-		}
-
-		size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
-
-		flash_get_offsets(base_b0, &flash_info[0]);
-
-		/* monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET,
-				    base_b0 + size_b0 - monitor_flash_len,
-				    base_b0 + size_b0 - 1, &flash_info[0]);
-
-		if (size_b1) {
-			/* Re-do sizing to get full correct info */
-			size_b1 =
-			    flash_get_size((vu_long *) base_b1, &flash_info[1]);
-
-			flash_get_offsets(base_b1, &flash_info[1]);
-
-			/* monitor protection ON by default */
-			(void)flash_protect(FLAG_PROTECT_SET,
-					    base_b1 + size_b1 -
-					    monitor_flash_len,
-					    base_b1 + size_b1 - 1,
-					    &flash_info[1]);
-			/* monitor protection OFF by default (one is enough) */
-			(void)flash_protect(FLAG_PROTECT_CLEAR,
-					    base_b0 + size_b0 -
-					    monitor_flash_len,
-					    base_b0 + size_b0 - 1,
-					    &flash_info[0]);
-		} else {
-			flash_info[1].flash_id = FLASH_UNKNOWN;
-			flash_info[1].sector_count = -1;
-		}
-
-		flash_info[0].size = size_b0;
-		flash_info[1].size = size_b1;
-	}			/* else 2 banks */
-	return (size_b0 + size_b1);
-}
-
-
-static void flash_get_offsets(ulong base, flash_info_t * info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id == FLASH_AM040)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] =
-				    base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type           */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-}
diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
deleted file mode 100644
index b21daa0..0000000
--- a/board/amcc/walnut/walnut.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * (C) Copyright 2000-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	/*-------------------------------------------------------------------------+
-	  | Interrupt controller setup for the Walnut/Sycamore board.
-	  | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
-	  |       IRQ 16    405GP internally generated; active low; level sensitive
-	  |       IRQ 17-24 RESERVED
-	  |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
-	  |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
-	  |       IRQ 27 (EXT IRQ 2) Not Used
-	  |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
-	  |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-	  |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
-	  |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
-	  | Note for Walnut board:
-	  |       An interrupt taken for the FPGA (IRQ 25) indicates that either
-	  |       the Mouse, Keyboard, IRDA, or External Expansion caused the
-	  |       interrupt. The FPGA must be read to determine which device
-	  |       caused the interrupt. The default setting of the FPGA clears
-	  |
-	  +-------------------------------------------------------------------------*/
-
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000020);	/* set all but FPGA SMI to be non-critical */
-	mtdcr(UIC0PR, 0xFFFFFFE0);	/* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	/* set UART1 control to select CTS/RTS */
-#define FPGA_BRDC       0xF0300004
-	*(volatile char *)(FPGA_BRDC) |= 0x1;
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-	uint pvr = get_pvr();
-
-	if (pvr == PVR_405GPR_RB) {
-		puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
-	} else {
-		puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
-	}
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-/*
- * dram_init() reads EEPROM via I2c. EEPROM contains all of
- * the necessary info for SDRAM controller configuration
- */
-int dram_init(void)
-{
-	gd->ram_size = spd_sdram();
-
-	return 0;
-}
diff --git a/board/amcc/yosemite/Kconfig b/board/amcc/yosemite/Kconfig
deleted file mode 100644
index dfa1068..0000000
--- a/board/amcc/yosemite/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_YOSEMITE
-
-config SYS_BOARD
-	default "yosemite"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "yosemite"
-
-endif
diff --git a/board/amcc/yosemite/MAINTAINERS b/board/amcc/yosemite/MAINTAINERS
deleted file mode 100644
index 3f553e1..0000000
--- a/board/amcc/yosemite/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-YOSEMITE BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/yosemite/
-F:	include/configs/yosemite.h
-F:	configs/yellowstone_defconfig
-F:	configs/yosemite_defconfig
diff --git a/board/amcc/yosemite/Makefile b/board/amcc/yosemite/Makefile
deleted file mode 100644
index daf020a..0000000
--- a/board/amcc/yosemite/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= yosemite.o
-extra-y	+= init.o
diff --git a/board/amcc/yosemite/config.mk b/board/amcc/yosemite/config.mk
deleted file mode 100644
index f18b097..0000000
--- a/board/amcc/yosemite/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/yosemite/init.S b/board/amcc/yosemite/init.S
deleted file mode 100644
index 529cc65..0000000
--- a/board/amcc/yosemite/init.S
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#include <asm-offsets.h>
-#include <ppc_asm.tmpl>
-#include <asm/mmu.h>
-#include <config.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-    tlbtab_start
-
-    /*
-     * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-     * speed up boot process. It is patched after relocation to enable SA_I
-     */
-    tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G/*|SA_I*/)
-
-    /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-    tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G )
-
-    tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG )
-    tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_RW | SA_IG )
-    tlbentry( CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_RWX | SA_W|SA_I )
-
-    /* PCI */
-    tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_RW | SA_IG )
-    tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_RW | SA_IG )
-    tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_RW | SA_IG )
-    tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_RW | SA_IG )
-
-    /* USB 2.0 Device */
-    tlbentry( CONFIG_SYS_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_RW | SA_IG )
-
-    tlbtab_end
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
deleted file mode 100644
index f46aacf..0000000
--- a/board/amcc/yosemite/yosemite.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * (C) Copyright 2006-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <spd_sdram.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-static inline u32 get_async_pci_freq(void)
-{
-	if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) &
-		CONFIG_SYS_BCSR5_PCI66EN)
-		return 66666666;
-	else
-		return 33333333;
-}
-
-int board_early_init_f(void)
-{
-	register uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-	mtdcr(EBC0_CFGADDR, EBC0_CFG);
-	reg = mfdcr(EBC0_CFGDATA);
-	mtdcr(EBC0_CFGDATA, reg | 0x04000000);	/* Set ATC */
-
-	/*--------------------------------------------------------------------
-	 * Setup the GPIO pins
-	 *-------------------------------------------------------------------*/
-	/*CPLD cs */
-	/*setup Address lines for flash size 64Meg. */
-	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000);
-
-	/*setup emac */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
-	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
-	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
-
-	/*UART1 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
-	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
-	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
-
-	/* external interrupts IRQ0...3 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000);
-	out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00);
-	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500);
-
-#ifdef CONFIG_440EP
-	/*setup USB 2.0 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
-	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
-	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
-	out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
-#endif
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000009);	/* ATI & UIC1 crit are critical */
-	mtdcr(UIC0PR, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(UIC0TR, 0x01c00008);	/* per ref-board manual */
-	mtdcr(UIC0VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(UIC1TR, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	/*--------------------------------------------------------------------
-	 * Setup other serial configuration
-	 *-------------------------------------------------------------------*/
-	mfsdr(SDR0_PCI0, reg);
-	mtsdr(SDR0_PCI0, 0x80000000 | reg);	/* PCI arbiter enabled */
-	mtsdr(SDR0_PFC0, 0x00003e00);	/* Pin function */
-	mtsdr(SDR0_PFC1, 0x00048000);	/* Pin function: UART0 has 4 pins */
-
-	/* Check and reconfigure the PCI sync clock if necessary */
-	ppc4xx_pci_sync_clock_config(get_async_pci_freq());
-
-	/*clear tmrclk divisor */
-	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x04) = 0x00;
-
-	/*enable ethernet */
-	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x08) = 0xf0;
-
-#ifdef CONFIG_440EP
-	/*enable usb 1.1 fs device and remove usb 2.0 reset */
-	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x09) = 0x00;
-#endif
-
-	/*get rid of flash write protect */
-	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x07) = 0x00;
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	uint pbcr;
-	int size_val = 0;
-
-	/* Re-do sizing to get full correct info */
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	pbcr = mfdcr(EBC0_CFGDATA);
-	switch (gd->bd->bi_flashsize) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	case 32 << 20:
-		size_val = 5;
-		break;
-	case 64 << 20:
-		size_val = 6;
-		break;
-	case 128 << 20:
-		size_val = 7;
-		break;
-	}
-	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	mtdcr(EBC0_CFGDATA, pbcr);
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CONFIG_SYS_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-	u8 rev;
-	u32 clock = get_async_pci_freq();
-
-#ifdef CONFIG_440EP
-	printf("Board: Yosemite - AMCC PPC440EP Evaluation Board");
-#else
-	printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
-#endif
-
-	rev = in_8((void *)(CONFIG_SYS_BCSR_BASE + 0));
-	printf(", Rev. %X, PCI-Async=%d MHz", rev, clock / 1000000);
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	/*
-	 * Reconfiguration of the PCI sync clock is already done,
-	 * now check again if everything is in range:
-	 */
-	if (ppc4xx_pci_sync_clock_config(clock)) {
-		printf("ERROR: PCI clocking incorrect (async=%d "
-		       "sync=%ld)!\n", clock, get_PCI_freq());
-	}
-
-	return (0);
-}
-
-/*************************************************************************
- *  dram_init -- doesn't use serial presence detect.
- *
- *  Assumes:    256 MB, ECC, non-registered
- *              PLB @ 133 MHz
- *
- ************************************************************************/
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-void sdram_tr1_set(int ram_address, int* tr1_value)
-{
-	int i;
-	int j, k;
-	volatile unsigned int* ram_pointer =  (unsigned int*)ram_address;
-	int first_good = -1, last_bad = 0x1ff;
-
-	unsigned long test[NUM_TRIES] = {
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
-	/* go through all possible SDRAM0_TR1[RDCT] values */
-	for (i=0; i<=0x1ff; i++) {
-		/* set the current value for TR1 */
-		mtsdram(SDRAM0_TR1, (0x80800800 | i));
-
-		/* write values */
-		for (j=0; j<NUM_TRIES; j++) {
-			ram_pointer[j] = test[j];
-
-			/* clear any cache at ram location */
-			__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-		}
-
-		/* read values back */
-		for (j=0; j<NUM_TRIES; j++) {
-			for (k=0; k<NUM_READS; k++) {
-				/* clear any cache at ram location */
-				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
-				if (ram_pointer[j] != test[j])
-					break;
-			}
-
-			/* read error */
-			if (k != NUM_READS) {
-				break;
-			}
-		}
-
-		/* we have a SDRAM0_TR1[RDCT] that is part of the window */
-		if (j == NUM_TRIES) {
-			if (first_good == -1)
-				first_good = i;		/* found beginning of window */
-		} else { /* bad read */
-			/* if we have not had a good read then don't care */
-			if(first_good != -1) {
-				/* first failure after a good read */
-				last_bad = i-1;
-				break;
-			}
-		}
-	}
-
-	/* return the current value for TR1 */
-	*tr1_value = (first_good + last_bad) / 2;
-}
-
-int dram_init(void)
-{
-	register uint reg;
-	int tr1_bank1, tr1_bank2;
-
-	/*--------------------------------------------------------------------
-	 * Setup some default
-	 *------------------------------------------------------------------*/
-	mtsdram(SDRAM0_UABBA, 0x00000000);	/* ubba=0 (default)             */
-	mtsdram(SDRAM0_SLIO, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
-	mtsdram(SDRAM0_DEVOPT, 0x00000000);	/* dll=0 ds=0 (normal)          */
-	mtsdram(SDRAM0_CLKTR, 0x40000000);	/* ?? */
-	mtsdram(SDRAM0_WDDCTR, 0x40000000);	/* ?? */
-
-	/*clear this first, if the DDR is enabled by a debugger
-	  then you can not make changes. */
-	mtsdram(SDRAM0_CFG0, 0x00000000);	/* Disable EEC */
-
-	/*--------------------------------------------------------------------
-	 * Setup for board-specific specific mem
-	 *------------------------------------------------------------------*/
-	/*
-	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
-	 */
-	mtsdram(SDRAM0_B0CR, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
-	mtsdram(SDRAM0_B1CR, 0x080a4001);	/* SDBA=0x080 128MB, Mode 3, enabled */
-
-	mtsdram(SDRAM0_TR0, 0x410a4012);	/* ?? */
-	mtsdram(SDRAM0_RTR, 0x04080000);	/* ?? */
-	mtsdram(SDRAM0_CFG1, 0x00000000);	/* Self-refresh exit, disable PM    */
-	mtsdram(SDRAM0_CFG0, 0x30000000);	/* Disable EEC */
-	udelay(400);		/* Delay 200 usecs (min)            */
-
-	/*--------------------------------------------------------------------
-	 * Enable the controller, then wait for DCEN to complete
-	 *------------------------------------------------------------------*/
-	mtsdram(SDRAM0_CFG0, 0x80000000);	/* Enable */
-
-	for (;;) {
-		mfsdram(SDRAM0_MCSTS, reg);
-		if (reg & 0x80000000)
-			break;
-	}
-
-	sdram_tr1_set(0x00000000, &tr1_bank1);
-	sdram_tr1_set(0x08000000, &tr1_bank2);
-	mtsdram(SDRAM0_TR1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800));
-
-	gd->ram_size = CONFIG_SYS_SDRAM_BANKS *
-		(CONFIG_SYS_KBYTES_SDRAM * 1024);	/* set bytes */
-
-	return 0;
-}
-
-/*************************************************************************
- *  hw_watchdog_reset
- *
- *	This routine is called to reset (keep alive) the watchdog timer
- *
- ************************************************************************/
-#if defined(CONFIG_HW_WATCHDOG)
-void hw_watchdog_reset(void)
-{
-
-}
-#endif
-
-void board_reset(void)
-{
-	/* give reset to BCSR */
-	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x06) = 0x09;
-}
diff --git a/board/amcc/yucca/Kconfig b/board/amcc/yucca/Kconfig
deleted file mode 100644
index 61d9589..0000000
--- a/board/amcc/yucca/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_YUCCA
-
-config SYS_BOARD
-	default "yucca"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "yucca"
-
-endif
diff --git a/board/amcc/yucca/MAINTAINERS b/board/amcc/yucca/MAINTAINERS
deleted file mode 100644
index 1cbdb0e7..0000000
--- a/board/amcc/yucca/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-YUCCA BOARD
-#M:	-
-S:	Maintained
-F:	board/amcc/yucca/
-F:	include/configs/yucca.h
-F:	configs/yucca_defconfig
diff --git a/board/amcc/yucca/Makefile b/board/amcc/yucca/Makefile
deleted file mode 100644
index 5b1af32..0000000
--- a/board/amcc/yucca/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= yucca.o flash.o cmd_yucca.o
-extra-y	+= init.o
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
deleted file mode 100644
index cc78284..0000000
--- a/board/amcc/yucca/cmd_yucca.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * hacked for evb440spe
- */
-
-#include <common.h>
-#include <cli.h>
-#include <command.h>
-#include <console.h>
-#include "yucca.h"
-#include <i2c.h>
-#include <asm/byteorder.h>
-
-extern void print_evb440spe_info(void);
-static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag,
-		int flag, int argc, char * const argv[]);
-
-/* ------------------------------------------------------------------------- */
-int do_evb440spe(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	return setBootStrapClock (cmdtp, 1, flag, argc, argv);
-}
-
-/* ------------------------------------------------------------------------- */
-/* Modify memory.
- *
- * Syntax:
- *	evb440spe wrclk prom0,prom1
- */
-static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
-		int argc, char * const argv[])
-{
-	uchar	chip;
-	ulong	data;
-	int	nbytes;
-
-	char sysClock[4];
-	char cpuClock[4];
-	char plbClock[4];
-	char pcixClock[4];
-
-	if (argc < 3)
-		return cmd_usage(cmdtp);
-
-	if (strcmp(argv[2], "prom0") == 0)
-		chip = IIC0_BOOTPROM_ADDR;
-	else
-		chip = IIC0_ALT_BOOTPROM_ADDR;
-
-	do {
-		printf("enter sys clock frequency 33 or 66 MHz or quit to abort\n");
-		nbytes = cli_readline(" ? ");
-
-		if (strcmp(console_buffer, "quit") == 0)
-			return 0;
-
-		if ((strcmp(console_buffer, "33") != 0) &
-				(strcmp(console_buffer, "66") != 0))
-			nbytes=0;
-
-		strcpy(sysClock, console_buffer);
-
-	} while (nbytes == 0);
-
-	do {
-		if (strcmp(sysClock, "66") == 0) {
-			printf("enter cpu clock frequency 400, 533 MHz or quit to abort\n");
-		} else {
-#ifdef	CONFIG_STRESS
-			printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n");
-#else
-			printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n");
-#endif
-		}
-		nbytes = cli_readline(" ? ");
-
-		if (strcmp(console_buffer, "quit") == 0)
-			return 0;
-
-		if (strcmp(sysClock, "66") == 0) {
-			if ((strcmp(console_buffer, "400") != 0) &
-					(strcmp(console_buffer, "533") != 0)
-#ifdef	CONFIG_STRESS
-					& (strcmp(console_buffer, "667") != 0)
-#endif
-			   ) {
-				nbytes = 0;
-			}
-		} else {
-			if ((strcmp(console_buffer, "400") != 0) &
-					(strcmp(console_buffer, "500") != 0) &
-					(strcmp(console_buffer, "533") != 0)
-#ifdef	CONFIG_STRESS
-					& (strcmp(console_buffer, "667") != 0)
-#endif
-			   ) {
-				nbytes = 0;
-			}
-		}
-
-		strcpy(cpuClock, console_buffer);
-
-	} while (nbytes == 0);
-
-	if (strcmp(cpuClock, "500") == 0){
-		strcpy(plbClock, "166");
-	} else if (strcmp(cpuClock, "533") == 0){
-		strcpy(plbClock, "133");
-	} else {
-		do {
-			if (strcmp(cpuClock, "400") == 0)
-				printf("enter plb clock frequency 100, 133 MHz or quit to abort\n");
-
-#ifdef	CONFIG_STRESS
-			if (strcmp(cpuClock, "667") == 0)
-				printf("enter plb clock frequency 133, 166 MHz or quit to abort\n");
-
-#endif
-			nbytes = cli_readline(" ? ");
-
-			if (strcmp(console_buffer, "quit") == 0)
-				return 0;
-
-			if (strcmp(cpuClock, "400") == 0) {
-				if ((strcmp(console_buffer, "100") != 0) &
-						(strcmp(console_buffer, "133") != 0))
-					nbytes = 0;
-			}
-#ifdef	CONFIG_STRESS
-			if (strcmp(cpuClock, "667") == 0) {
-				if ((strcmp(console_buffer, "133") != 0) &
-						(strcmp(console_buffer, "166") != 0))
-					nbytes = 0;
-			}
-#endif
-			strcpy(plbClock, console_buffer);
-
-		} while (nbytes == 0);
-	}
-
-	do {
-		printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n");
-		nbytes = cli_readline(" ? ");
-
-		if (strcmp(console_buffer, "quit") == 0)
-			return 0;
-
-		if ((strcmp(console_buffer, "33") != 0) &
-				(strcmp(console_buffer, "66") != 0) &
-				(strcmp(console_buffer, "100") != 0) &
-				(strcmp(console_buffer, "133") != 0)) {
-			nbytes = 0;
-		}
-		strcpy(pcixClock, console_buffer);
-
-	} while (nbytes == 0);
-
-	printf("\nsys clk   = %s MHz\n", sysClock);
-	printf("cpu clk   = %s MHz\n", cpuClock);
-	printf("plb clk   = %s MHz\n", plbClock);
-	printf("Pci-X clk = %s MHz\n", pcixClock);
-
-	do {
-		printf("\npress [y] to write I2C bootstrap\n");
-		printf("or [n] to abort.\n");
-		printf("Don't forget to set board switches\n");
-		printf("according to your choice before re-starting\n");
-		printf("(refer to 440spe_uboot_kit_um_1_01.pdf)\n");
-
-		nbytes = cli_readline(" ? ");
-		if (strcmp(console_buffer, "n") == 0)
-			return 0;
-
-	} while (nbytes == 0);
-
-	if (strcmp(sysClock, "33") == 0) {
-		if ((strcmp(cpuClock, "400") == 0) &
-				(strcmp(plbClock, "100") == 0))
-			data = 0x8678c206;
-
-		if ((strcmp(cpuClock, "400") == 0) &
-				(strcmp(plbClock, "133") == 0))
-			data = 0x8678c2c6;
-
-		if ((strcmp(cpuClock, "500") == 0))
-			data = 0x8778f2c6;
-
-		if ((strcmp(cpuClock, "533") == 0))
-			data = 0x87790252;
-
-#ifdef	CONFIG_STRESS
-		if ((strcmp(cpuClock, "667") == 0) &
-				(strcmp(plbClock, "133") == 0))
-			data = 0x87794256;
-
-		if ((strcmp(cpuClock, "667") == 0) &
-				(strcmp(plbClock, "166") == 0))
-			data = 0x87794206;
-
-#endif
-	}
-	if (strcmp(sysClock, "66") == 0) {
-		if ((strcmp(cpuClock, "400") == 0) &
-				(strcmp(plbClock, "100") == 0))
-			data = 0x84706206;
-
-		if ((strcmp(cpuClock, "400") == 0) &
-				(strcmp(plbClock, "133") == 0))
-			data = 0x847062c6;
-
-		if ((strcmp(cpuClock, "533") == 0))
-			data = 0x85708206;
-
-#ifdef	CONFIG_STRESS
-		if ((strcmp(cpuClock, "667") == 0) &
-				(strcmp(plbClock, "133") == 0))
-			data = 0x8570a256;
-
-		if ((strcmp(cpuClock, "667") == 0) &
-				(strcmp(plbClock, "166") == 0))
-			data = 0x8570a206;
-
-#endif
-	}
-
-#ifdef	DEBUG
-	printf(" pin strap0 to write in i2c  = %x\n", data);
-#endif	/* DEBUG */
-
-	if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0)
-		printf("Error writing strap0 in %s\n", argv[2]);
-
-	if (strcmp(pcixClock, "33") == 0)
-		data = 0x00000701;
-
-	if (strcmp(pcixClock, "66") == 0)
-		data = 0x00000601;
-
-	if (strcmp(pcixClock, "100") == 0)
-		data = 0x00000501;
-
-	if (strcmp(pcixClock, "133") == 0)
-		data = 0x00000401;
-
-	if (strcmp(plbClock, "166") == 0)
-		data = data | 0x05950000;
-	else
-		data = data | 0x05A50000;
-
-#ifdef	DEBUG
-	printf(" pin strap1 to write in i2c  = %x\n", data);
-#endif	/* DEBUG */
-
-	udelay(1000);
-	if (i2c_write(chip, 4, 1, (uchar *)&data, 4) != 0)
-		printf("Error writing strap1 in %s\n", argv[2]);
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	evb440spe,	3,	1,	do_evb440spe,
-	"program the serial device strap",
-	"wrclk [prom0|prom1] - program the serial device strap"
-);
diff --git a/board/amcc/yucca/config.mk b/board/amcc/yucca/config.mk
deleted file mode 100644
index 53d3f34..0000000
--- a/board/amcc/yucca/config.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-#
-# AMCC 440SPe Reference Platform (yucca) board
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/yucca/flash.c b/board/amcc/yucca/flash.c
deleted file mode 100644
index b1fd657..0000000
--- a/board/amcc/yucca/flash.c
+++ /dev/null
@@ -1,1033 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-#include <asm/ppc440.h>
-#include "yucca.h"
-
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif				/* DEBUG */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
-
-/*
- * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
- */
-static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = {
-	{0xfff00000, 0xfff80000, 0xe7c00001}, /* 0:boot from small flash */
-	{0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66      */
-	{0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash  */
-	{0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 3:boot from big flash 33*/
-	{0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 4:boot from big flash 66*/
-	{0x00000000, 0x00000000, 0x00000000}, /* 5:boot from             */
-	{0x00000000, 0x00000000, 0x00000000}, /* 6:boot from pci 66      */
-	{0x00000000, 0x00000000, 0x00000000}, /* 7:boot from             */
-	{0xfff00000, 0xfff80000, 0xe7c00001}, /* 8:boot from small flash */
-};
-
-/*
- * include common flash code (for amcc boards)
- */
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word(flash_info_t * info, ulong dest, ulong data);
-#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-static int write_word_1(flash_info_t * info, ulong dest, ulong data);
-static int write_word_2(flash_info_t * info, ulong dest, ulong data);
-static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
-static int flash_erase_2(flash_info_t * info, int s_first, int s_last);
-static ulong flash_get_size_1(vu_long * addr, flash_info_t * info);
-static ulong flash_get_size_2(vu_long * addr, flash_info_t * info);
-#endif
-
-void flash_print_info(flash_info_t * info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_AMD:
-			printf("AMD ");
-			break;
-		case FLASH_MAN_STM:
-			printf("STM ");
-			break;
-		case FLASH_MAN_FUJ:
-			printf("FUJITSU ");
-			break;
-		case FLASH_MAN_SST:
-			printf("SST ");
-			break;
-		case FLASH_MAN_MX:
-			printf("MIXC ");
-			break;
-		default:
-			printf("Unknown Vendor ");
-			break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-		case FLASH_AM040:
-			printf("AM29F040 (512 Kbit, uniform sector size)\n");
-			break;
-		case FLASH_AM400B:
-			printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
-			break;
-		case FLASH_AM400T:
-			printf("AM29LV400T (4 Mbit, top boot sector)\n");
-			break;
-		case FLASH_AM800B:
-			printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
-			break;
-		case FLASH_AM800T:
-			printf("AM29LV800T (8 Mbit, top boot sector)\n");
-			break;
-		case FLASH_AMD016:
-			printf("AM29F016D (16 Mbit, uniform sector size)\n");
-			break;
-		case FLASH_AM160B:
-			printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
-			break;
-		case FLASH_AM160T:
-			printf("AM29LV160T (16 Mbit, top boot sector)\n");
-			break;
-		case FLASH_AM320B:
-			printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
-			break;
-		case FLASH_AM320T:
-			printf("AM29LV320T (32 Mbit, top boot sector)\n");
-			break;
-		case FLASH_AM033C:
-			printf("AM29LV033C (32 Mbit, top boot sector)\n");
-			break;
-		case FLASH_SST800A:
-			printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
-			break;
-		case FLASH_SST160A:
-			printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
-			break;
-		case FLASH_STMW320DT:
-			printf ("M29W320DT (32 M, top sector)\n");
-			break;
-		case FLASH_MXLV320T:
-			printf ("MXLV320T (32 Mbit, top sector)\n");
-			break;
-		default:
-			printf("Unknown Chip Type\n");
-			break;
-	}
-
-	printf("  Size: %ld KB in %d Sectors\n",
-			info->size >> 10, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count - 1))
-			size = info->start[i + 1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *)info->start[i];
-		size = size >> 2;	/* divide by 4 for longword access */
-		for (k = 0; k < size; k++) {
-			if (*flash++ != 0xffffffff) {
-				erased = 0;
-				break;
-			}
-		}
-
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s%s",
-				info->start[i],
-				erased ? " E" : "  ",
-				info->protect[i] ? "RO " : "   ");
-	}
-	printf("\n");
-	return;
-}
-
-
-/*
- * The following code cannot be run from FLASH!
- */
-#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-{
-	/* bit 0 used for big flash marking */
-	if ((ulong)addr & 0x1)
-		return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info);
-	else
-		return flash_get_size_1(addr, info);
-}
-
-static ulong flash_get_size_1(vu_long * addr, flash_info_t * info)
-#else
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-#endif
-{
-	short i;
-	CONFIG_SYS_FLASH_WORD_SIZE value;
-	ulong base = (ulong) addr;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
-
-	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
-
-	/* Write auto select command: read Manufacturer ID */
-	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
-	udelay(1000);
-
-	value = addr2[0];
-	DEBUGF("FLASH MANUFACT: %x\n", value);
-
-	switch (value) {
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
-			info->flash_id = FLASH_MAN_AMD;
-			break;
-		case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
-			info->flash_id = FLASH_MAN_FUJ;
-			break;
-		case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
-			info->flash_id = FLASH_MAN_SST;
-			break;
-		case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
-			info->flash_id = FLASH_MAN_STM;
-			break;
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			info->sector_count = 0;
-			info->size = 0;
-			return (0);	/* no or unknown flash  */
-	}
-
-	value = addr2[1];	/* device ID            */
-	DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
-	switch (value) {
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B:
-			info->flash_id += FLASH_AM040;
-			info->sector_count = 8;
-			info->size = 0x0080000;	/* => 512 ko */
-			break;
-
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B:
-			info->flash_id += FLASH_AM040;
-			info->sector_count = 8;
-			info->size = 0x0080000;	/* => 512 ko */
-			break;
-
-		case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B:
-			info->flash_id += FLASH_AM040;
-			info->sector_count = 8;
-			info->size = 0x0080000;	/* => 512 ko */
-			break;
-
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D:
-			info->flash_id += FLASH_AMD016;
-			info->sector_count = 32;
-			info->size = 0x00200000;
-			break;		/* => 2 MB              */
-
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C:
-			info->flash_id += FLASH_AMDLV033C;
-			info->sector_count = 64;
-			info->size = 0x00400000;
-			break;		/* => 4 MB              */
-
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T:
-			info->flash_id += FLASH_AM400T;
-			info->sector_count = 11;
-			info->size = 0x00080000;
-			break;		/* => 0.5 MB            */
-
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B:
-			info->flash_id += FLASH_AM400B;
-			info->sector_count = 11;
-			info->size = 0x00080000;
-			break;		/* => 0.5 MB            */
-
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T:
-			info->flash_id += FLASH_AM800T;
-			info->sector_count = 19;
-			info->size = 0x00100000;
-			break;		/* => 1 MB              */
-
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B:
-			info->flash_id += FLASH_AM800B;
-			info->sector_count = 19;
-			info->size = 0x00100000;
-			break;		/* => 1 MB              */
-
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T:
-			info->flash_id += FLASH_AM160T;
-			info->sector_count = 35;
-			info->size = 0x00200000;
-			break;		/* => 2 MB              */
-
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B:
-			info->flash_id += FLASH_AM160B;
-			info->sector_count = 35;
-			info->size = 0x00200000;
-			break;		/* => 2 MB              */
-
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			return (0);	/* => no or unknown flash */
-	}
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-			((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
-			((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] =
-					base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type           */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
-
-		/* For AMD29033C flash we need to resend the command of *
-		 * reading flash protection for upper 8 Mb of flash     */
-		if (i == 32) {
-			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
-			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
-		}
-
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-			info->protect[i] = 0;
-		else
-			info->protect[i] = addr2[2] & 1;
-	}
-
-	/* issue bank reset to return to read mode */
-	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
-
-	return (info->size);
-}
-
-static int wait_for_DQ7_1(flash_info_t * info, int sect)
-{
-	ulong start, now, last;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
-		(CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
-
-	start = get_timer(0);
-	last = start;
-	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
-			(CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return -1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc('.');
-			last = now;
-		}
-	}
-	return 0;
-}
-
-#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
-	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
-			((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
-			((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
-			((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
-		return flash_erase_2(info, s_first, s_last);
-	} else {
-		return flash_erase_1(info, s_first, s_last);
-	}
-}
-
-static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
-#else
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-#endif
-{
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect;
-	int i;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf("- missing\n");
-		else
-			printf("- no sectors to erase\n");
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot)
-		printf("- Warning: %d protected sectors will not be erased!", prot);
-
-	printf("\n");
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
-
-			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
-				for (i = 0; i < 50; i++)
-					udelay(1000);	/* wait 1 ms */
-			} else {
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
-			}
-			/*
-			 * Wait for each sector to complete, it's more
-			 * reliable.  According to AMD Spec, you must
-			 * issue all erase commands within a specified
-			 * timeout.  This has been seen to fail, especially
-			 * if printf()s are included (for debug)!!
-			 */
-			wait_for_DQ7_1(info, sect);
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/* reset to read mode */
-	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-
-	printf(" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp)
-			data = (data << 8) | (*(uchar *) cp);
-
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-
-		for (; cnt == 0 && i < 4; ++i, ++cp)
-			data = (data << 8) | (*(uchar *) cp);
-
-		if ((rc = write_word(info, wp, data)) != 0)
-			return (rc);
-
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i)
-			data = (data << 8) | *src++;
-
-		if ((rc = write_word(info, wp, data)) != 0)
-			return (rc);
-
-		wp += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0)
-		return (0);
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp)
-		data = (data << 8) | (*(uchar *) cp);
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-static int write_word(flash_info_t * info, ulong dest, ulong data)
-{
-	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
-			((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
-			((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
-			((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
-		return write_word_2(info, dest, data);
-	} else {
-		return write_word_1(info, dest, data);
-	}
-}
-
-static int write_word_1(flash_info_t * info, ulong dest, ulong data)
-#else
-static int write_word(flash_info_t * info, ulong dest, ulong data)
-#endif
-{
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
-	ulong start;
-	int i, flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data)
-		return (2);
-
-	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
-
-		dest2[i] = data2[i];
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* data polling for D7 */
-		start = get_timer(0);
-		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
-				(data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
-
-			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
-				return (1);
-		}
-	}
-
-	return (0);
-}
-
-#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-
-#undef  CONFIG_SYS_FLASH_WORD_SIZE
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
-{
-	short i;
-	int n;
-	CONFIG_SYS_FLASH_WORD_SIZE value;
-	ulong base = (ulong) addr;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
-
-	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
-
-	/* issue bank reset to return to read mode */
-	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
-	/* Write auto select command: read Manufacturer ID */
-	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
-	udelay(1000);
-
-	value = addr2[0];
-	DEBUGF("FLASH MANUFACT: %x\n", value);
-
-	switch (value) {
-		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
-			info->flash_id = FLASH_MAN_AMD;
-			break;
-		case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
-			info->flash_id = FLASH_MAN_FUJ;
-			break;
-		case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
-			info->flash_id = FLASH_MAN_SST;
-			break;
-		case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
-			info->flash_id = FLASH_MAN_STM;
-			break;
-		case (CONFIG_SYS_FLASH_WORD_SIZE) MX_MANUFACT:
-			info->flash_id = FLASH_MAN_MX;
-			break;
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			info->sector_count = 0;
-			info->size = 0;
-			return (0);	/* no or unknown flash  */
-	}
-
-	value = addr2[1];	/* device ID            */
-	DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
-	switch (value) {
-		case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
-			info->flash_id += FLASH_AM320T;
-			info->sector_count = 71;
-			info->size = 0x00400000;
-			break;	/* => 4 MB	*/
-		case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
-			info->flash_id += FLASH_AM320B;
-			info->sector_count = 71;
-			info->size = 0x00400000;
-			break;	/* => 4 MB	*/
-		case (CONFIG_SYS_FLASH_WORD_SIZE)STM_ID_29W320DT:
-			info->flash_id += FLASH_STMW320DT;
-			info->sector_count = 67;
-			info->size = 0x00400000;
-			break;	/* => 4 MB	*/
-		case (CONFIG_SYS_FLASH_WORD_SIZE)MX_ID_LV320T:
-			info->flash_id += FLASH_MXLV320T;
-			info->sector_count = 71;
-			info->size = 0x00400000;
-			break;	/* => 4 MB	*/
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			return (0);	/* => no or unknown flash */
-	}
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-			((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
-			((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
-		/* set sector offsets for top boot block type		*/
-		base += info->size;
-		i = info->sector_count;
-		/*  1 x 16k boot sector */
-		base -= 16 << 10;
-		--i;
-		info->start[i] = base;
-		/*  2 x 8k  boot sectors */
-		for (n = 0; n < 2; ++n) {
-			base -= 8 << 10;
-			--i;
-			info->start[i] = base;
-		}
-		/*  1 x 32k boot sector */
-		base -= 32 << 10;
-		--i;
-		info->start[i] = base;
-
-		while (i > 0) {			/* 64k regular sectors	*/
-			base -= 64 << 10;
-			--i;
-			info->start[i] = base;
-		}
-	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) {
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00002000;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000a000;
-		info->start[i--] = base + info->size - 0x0000c000;
-		info->start[i--] = base + info->size - 0x0000e000;
-		info->start[i--] = base + info->size - 0x00010000;
-
-		for (; i >= 0; i--)
-			info->start[i] = base + i * 0x00010000;
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-
-			for (i = 4; i < info->sector_count; i++)
-				info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		} else {
-			/* set sector offsets for top boot block type           */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-
-			for (; i >= 0; i--)
-				info->start[i] = base + i * 0x00010000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
-
-		/* For AMD29033C flash we need to resend the command of *
-		 * reading flash protection for upper 8 Mb of flash     */
-		if (i == 32) {
-			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
-			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
-		}
-
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-			info->protect[i] = 0;
-		else
-			info->protect[i] = addr2[2] & 1;
-	}
-
-	/* issue bank reset to return to read mode */
-	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
-
-	return (info->size);
-}
-
-static int wait_for_DQ7_2(flash_info_t * info, int sect)
-{
-	ulong start, now, last;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
-		(CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
-
-	start = get_timer(0);
-	last = start;
-	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
-			(CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return -1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc('.');
-			last = now;
-		}
-	}
-	return 0;
-}
-
-static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
-{
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect;
-	int i;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf("- missing\n");
-		else
-			printf("- no sectors to erase\n");
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot)
-		printf("- Warning: %d protected sectors will not be erased!",	prot);
-
-	printf("\n");
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
-
-			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
-				for (i = 0; i < 50; i++)
-					udelay(1000);	/* wait 1 ms */
-			} else {
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
-				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
-			}
-			/*
-			 * Wait for each sector to complete, it's more
-			 * reliable.  According to AMD Spec, you must
-			 * issue all erase commands within a specified
-			 * timeout.  This has been seen to fail, especially
-			 * if printf()s are included (for debug)!!
-			 */
-			wait_for_DQ7_2(info, sect);
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/* reset to read mode */
-	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-
-	printf(" done\n");
-	return 0;
-}
-
-static int write_word_2(flash_info_t * info, ulong dest, ulong data)
-{
-	ulong *data_ptr = &data;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)data_ptr;
-	ulong start;
-	int i;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data)
-		return (2);
-
-	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
-		int flag;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
-		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
-
-		dest2[i] = data2[i];
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* data polling for D7 */
-		start = get_timer(0);
-		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
-				(data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
-
-			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
-				return (1);
-		}
-	}
-
-	return (0);
-}
-#endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static int write_word(flash_info_t * info, ulong dest, ulong data);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
-	unsigned long total_b = 0;
-	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
-	unsigned short index = 0;
-	int i;
-	unsigned long val;
-	unsigned long ebc_boot_size;
-	unsigned long boot_selection;
-
-	mfsdr(sdr_pstrp0, val);
-	index = (val & SDR0_PSTRP0_BOOTSTRAP_MASK) >> 28;
-
-	if ((index == 0xc) || (index == 8)) {
-		/*
-		 * Boot Settings in IIC EEprom address 0xA8 or 0xA0
-		 * Read Serial Device Strap Register1 in PPC440SPe
-		 */
-		mfsdr(SDR0_SDSTP1, val);
-		boot_selection  = val & SDR0_SDSTP1_BOOT_SEL_MASK;
-		ebc_boot_size   = val & SDR0_SDSTP1_EBC_ROM_BS_MASK;
-
-		switch(boot_selection) {
-			case SDR0_SDSTP1_BOOT_SEL_EBC:
-				switch(ebc_boot_size) {
-					case SDR0_SDSTP1_EBC_ROM_BS_16BIT:
-						index = 3;
-						break;
-					case SDR0_SDSTP1_EBC_ROM_BS_8BIT:
-						index = 0;
-						break;
-				}
-				break;
-
-			case SDR0_SDSTP1_BOOT_SEL_PCI:
-				index = 1;
-				break;
-
-		}
-	} /*else if (index == 0) {*/
-/*		if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE)*/
-/*			index = 8;*/ /* sram below op code flash -> new index 8*/
-/*	}*/
-
-	DEBUGF("\n");
-	DEBUGF("FLASH: Index: %d\n", index);
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		flash_info[i].sector_count = -1;
-		flash_info[i].size = 0;
-
-		/* check whether the address is 0 */
-		if (flash_addr_table[index][i] == 0)
-			continue;
-
-		/* call flash_get_size() to initialize sector address */
-		size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
-				&flash_info[i]);
-
-		flash_info[i].size = size_b[i];
-
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-					i, size_b[i], size_b[i] << 20);
-			flash_info[i].sector_count = -1;
-			flash_info[i].size = 0;
-		}
-
-		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
-				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
-				    &flash_info[i]);
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
-				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[i]);
-#if defined(CONFIG_ENV_ADDR_REDUND)
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
-				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[i]);
-#endif
-#endif
-		total_b += flash_info[i].size;
-	}
-
-	return total_b;
-}
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
deleted file mode 100644
index 7da5c0d..0000000
--- a/board/amcc/yucca/init.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-	.section .bootpg,"ax"
-
-/**************************************************************************
- * TLB table for revA
- *************************************************************************/
-	.globl tlbtabA
-tlbtabA:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-	tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G)
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I)
-	tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_RW | SA_I)
-
-	tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_RWX | SA_IG)
-	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_RW | SA_IG)
-	tlbtab_end
-
-/**************************************************************************
- * TLB table for revB
- *
- * Notice: revB of the 440SPe chip is very strict about PLB real addresses
- * and ranges to be mapped for config space: it seems to only work with
- * d_nnnn_nnnn range (hangs the core upon config transaction attempts when
- * set otherwise) while revA uses c_nnnn_nnnn.
- *************************************************************************/
-	.globl tlbtabB
-tlbtabB:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-	tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G)
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I)
-	tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_RW | SA_I)
-
-	tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_RWX | SA_IG)
-	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_RW | SA_IG)
-	tlbtab_end
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
deleted file mode 100644
index 8ee3851..0000000
--- a/board/amcc/yucca/yucca.c
+++ /dev/null
@@ -1,714 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Port to AMCC-440SPE Evaluation Board SOP - April 2005
- *
- * PCIe supporting routines derived from Linux 440SPe PCIe driver.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <i2c.h>
-#include <netdev.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/4xx_pcie.h>
-#include <linux/errno.h>
-
-#include "yucca.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void fpga_init (void);
-
-#define DEBUG_ENV
-#ifdef DEBUG_ENV
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-
-int board_early_init_f (void)
-{
-/*----------------------------------------------------------------------------+
-| Define Boot devices
-+----------------------------------------------------------------------------*/
-#define BOOT_FROM_SMALL_FLASH		0x00
-#define BOOT_FROM_LARGE_FLASH_OR_SRAM	0x01
-#define BOOT_FROM_PCI			0x02
-#define BOOT_DEVICE_UNKNOWN		0x03
-
-/*----------------------------------------------------------------------------+
-| EBC Devices Characteristics
-|   Peripheral Bank Access Parameters       -   EBC_BxAP
-|   Peripheral Bank Configuration Register  -   EBC_BxCR
-+----------------------------------------------------------------------------*/
-
-/*
- * Small Flash and FRAM
- * BU Value
- * BxAP : 0x03800000  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
- * B0CR : 0xff098000  - BAS = ff0 - 100 11 00 0000000000000
- * B2CR : 0xe7098000  - BAS = e70 - 100 11 00 0000000000000
- */
-#define EBC_BXAP_SMALL_FLASH		EBC_BXAP_BME_DISABLED	| \
-					EBC_BXAP_TWT_ENCODE(7)	| \
-					EBC_BXAP_BCE_DISABLE	| \
-					EBC_BXAP_BCT_2TRANS	| \
-					EBC_BXAP_CSN_ENCODE(0)	| \
-					EBC_BXAP_OEN_ENCODE(0)	| \
-					EBC_BXAP_WBN_ENCODE(0)	| \
-					EBC_BXAP_WBF_ENCODE(0)	| \
-					EBC_BXAP_TH_ENCODE(0)	| \
-					EBC_BXAP_RE_DISABLED	| \
-					EBC_BXAP_SOR_DELAYED	| \
-					EBC_BXAP_BEM_WRITEONLY	| \
-					EBC_BXAP_PEN_DISABLED
-
-#define EBC_BXCR_SMALL_FLASH_CS0	EBC_BXCR_BAS_ENCODE(0xFF000000)	| \
-					EBC_BXCR_BS_16MB		| \
-					EBC_BXCR_BU_RW			| \
-					EBC_BXCR_BW_8BIT
-
-#define EBC_BXCR_SMALL_FLASH_CS2	EBC_BXCR_BAS_ENCODE(0xe7000000)	| \
-					EBC_BXCR_BS_16MB		| \
-					EBC_BXCR_BU_RW			| \
-					EBC_BXCR_BW_8BIT
-
-/*
- * Large Flash and SRAM
- * BU Value
- * BxAP : 0x048ff240  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
- * B0CR : 0xff09a000  - BAS = ff0 - 100 11 01 0000000000000
- * B2CR : 0xe709a000  - BAS = e70 - 100 11 01 0000000000000
-*/
-#define EBC_BXAP_LARGE_FLASH		EBC_BXAP_BME_DISABLED	| \
-					EBC_BXAP_TWT_ENCODE(7)	| \
-					EBC_BXAP_BCE_DISABLE	| \
-					EBC_BXAP_BCT_2TRANS	| \
-					EBC_BXAP_CSN_ENCODE(0)	| \
-					EBC_BXAP_OEN_ENCODE(0)	| \
-					EBC_BXAP_WBN_ENCODE(0)	| \
-					EBC_BXAP_WBF_ENCODE(0)	| \
-					EBC_BXAP_TH_ENCODE(0)	| \
-					EBC_BXAP_RE_DISABLED	| \
-					EBC_BXAP_SOR_DELAYED	| \
-					EBC_BXAP_BEM_WRITEONLY	| \
-					EBC_BXAP_PEN_DISABLED
-
-#define EBC_BXCR_LARGE_FLASH_CS0	EBC_BXCR_BAS_ENCODE(0xFF000000)	| \
-					EBC_BXCR_BS_16MB		| \
-					EBC_BXCR_BU_RW			| \
-					EBC_BXCR_BW_16BIT
-
-#define EBC_BXCR_LARGE_FLASH_CS2	EBC_BXCR_BAS_ENCODE(0xE7000000)	| \
-					EBC_BXCR_BS_16MB		| \
-					EBC_BXCR_BU_RW			| \
-					EBC_BXCR_BW_16BIT
-
-/*
- * FPGA
- * BU value :
- * B1AP = 0x05895240  - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000
- * B1CR = 0xe201a000  - BAS = e20 - 000 11 01 00000000000000
- */
-#define EBC_BXAP_FPGA			EBC_BXAP_BME_DISABLED	| \
-					EBC_BXAP_TWT_ENCODE(11)	| \
-					EBC_BXAP_BCE_DISABLE	| \
-					EBC_BXAP_BCT_2TRANS	| \
-					EBC_BXAP_CSN_ENCODE(10)	| \
-					EBC_BXAP_OEN_ENCODE(1)	| \
-					EBC_BXAP_WBN_ENCODE(1)	| \
-					EBC_BXAP_WBF_ENCODE(1)	| \
-					EBC_BXAP_TH_ENCODE(1)	| \
-					EBC_BXAP_RE_DISABLED	| \
-					EBC_BXAP_SOR_DELAYED	| \
-					EBC_BXAP_BEM_RW		| \
-					EBC_BXAP_PEN_DISABLED
-
-#define EBC_BXCR_FPGA_CS1		EBC_BXCR_BAS_ENCODE(0xe2000000)	| \
-					EBC_BXCR_BS_1MB			| \
-					EBC_BXCR_BU_RW			| \
-					EBC_BXCR_BW_16BIT
-
-	 unsigned long mfr;
-	/*
-	 * Define Variables for EBC initialization depending on BOOTSTRAP option
-	 */
-	unsigned long sdr0_pinstp, sdr0_sdstp1 ;
-	unsigned long bootstrap_settings, ebc_data_width, boot_selection;
-	int computed_boot_device = BOOT_DEVICE_UNKNOWN;
-
-	/*-------------------------------------------------------------------+
-	 | Initialize EBC CONFIG -
-	 | Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
-	 | default value :
-	 |	0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
-	 |
-	 +-------------------------------------------------------------------*/
-	mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
-			EBC_CFG_PTD_ENABLE |
-			EBC_CFG_RTC_16PERCLK |
-			EBC_CFG_ATC_PREVIOUS |
-			EBC_CFG_DTC_PREVIOUS |
-			EBC_CFG_CTC_PREVIOUS |
-			EBC_CFG_OEO_PREVIOUS |
-			EBC_CFG_EMC_DEFAULT |
-			EBC_CFG_PME_DISABLE |
-			EBC_CFG_PR_16);
-
-	/*-------------------------------------------------------------------+
-	 |
-	 |  PART 1 : Initialize EBC Bank 1
-	 |  ==============================
-	 | Bank1 is always associated to the EPLD.
-	 | It has to be initialized prior to other banks settings computation
-	 | since some board registers values may be needed to determine the
-	 | boot type
-	 |
-	 +-------------------------------------------------------------------*/
-	mtebc(PB1AP, EBC_BXAP_FPGA);
-	mtebc(PB1CR, EBC_BXCR_FPGA_CS1);
-
-	/*-------------------------------------------------------------------+
-	 |
-	 |  PART 2 : Determine which boot device was selected
-	 |  =================================================
-	 |
-	 |  Read Pin Strap Register in PPC440SPe
-	 |  Result can either be :
-	 |   - Boot strap = boot from EBC 8bits     => Small Flash
-	 |   - Boot strap = boot from PCI
-	 |   - Boot strap = IIC
-	 |  In case of boot from IIC, read Serial Device Strap Register1
-	 |
-	 |  Result can either be :
-	 |   - Boot from EBC  - EBC Bus Width = 8bits    => Small Flash
-	 |   - Boot from EBC  - EBC Bus Width = 16bits   => Large Flash or SRAM
-	 |   - Boot from PCI
-	 |
-	 +-------------------------------------------------------------------*/
-	/* Read Pin Strap Register in PPC440SP */
-	mfsdr(SDR0_PINSTP, sdr0_pinstp);
-	bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK;
-
-	switch (bootstrap_settings) {
-		case SDR0_PINSTP_BOOTSTRAP_SETTINGS0:
-			/*
-			 * Strapping Option A
-			 * Boot from EBC - 8 bits , Small Flash
-			 */
-			computed_boot_device = BOOT_FROM_SMALL_FLASH;
-			break;
-		case SDR0_PINSTP_BOOTSTRAP_SETTINGS1:
-			/*
-			 * Strappping Option B
-			 * Boot from PCI
-			 */
-			computed_boot_device = BOOT_FROM_PCI;
-			break;
-		case SDR0_PINSTP_BOOTSTRAP_IIC_50_EN:
-		case SDR0_PINSTP_BOOTSTRAP_IIC_54_EN:
-			/*
-			 * Strapping Option C or D
-			 * Boot Settings in IIC EEprom address 0x50 or 0x54
-			 * Read Serial Device Strap Register1 in PPC440SPe
-			 */
-			mfsdr(SDR0_SDSTP1, sdr0_sdstp1);
-			boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK;
-			ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK;
-
-			switch (boot_selection) {
-				case SDR0_SDSTP1_ERPN_EBC:
-					switch (ebc_data_width) {
-						case SDR0_SDSTP1_EBCW_16_BITS:
-							computed_boot_device =
-								BOOT_FROM_LARGE_FLASH_OR_SRAM;
-							break;
-						case SDR0_SDSTP1_EBCW_8_BITS :
-							computed_boot_device = BOOT_FROM_SMALL_FLASH;
-							break;
-					}
-					break;
-
-				case SDR0_SDSTP1_ERPN_PCI:
-					computed_boot_device = BOOT_FROM_PCI;
-					break;
-				default:
-					/* should not occure */
-					computed_boot_device = BOOT_DEVICE_UNKNOWN;
-			}
-			break;
-		default:
-			/* should not be */
-			computed_boot_device = BOOT_DEVICE_UNKNOWN;
-			break;
-	}
-
-	/*-------------------------------------------------------------------+
-	 |
-	 |  PART 3 : Compute EBC settings depending on selected boot device
-	 |  ======   ======================================================
-	 |
-	 | Resulting EBC init will be among following configurations :
-	 |
-	 |  - Boot from EBC 8bits => boot from Small Flash selected
-	 |            EBC-CS0     = Small Flash
-	 |            EBC-CS2     = Large Flash and SRAM
-	 |
-	 |  - Boot from EBC 16bits => boot from Large Flash or SRAM
-	 |            EBC-CS0     = Large Flash or SRAM
-	 |            EBC-CS2     = Small Flash
-	 |
-	 |  - Boot from PCI
-	 |            EBC-CS0     = not initialized to avoid address contention
-	 |            EBC-CS2     = same as boot from Small Flash selected
-	 |
-	 +-------------------------------------------------------------------*/
-	unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0;
-	unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0;
-
-	switch (computed_boot_device) {
-		/*-------------------------------------------------------------------*/
-		case BOOT_FROM_PCI:
-		/*-------------------------------------------------------------------*/
-			/*
-			 * By Default CS2 is affected to LARGE Flash
-			 * do not initialize SMALL FLASH to avoid address contention
-			 * Large Flash
-			 */
-			ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH;
-			ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2;
-			break;
-
-		/*-------------------------------------------------------------------*/
-		case BOOT_FROM_SMALL_FLASH:
-		/*-------------------------------------------------------------------*/
-			ebc0_cs0_bxap_value = EBC_BXAP_SMALL_FLASH;
-			ebc0_cs0_bxcr_value = EBC_BXCR_SMALL_FLASH_CS0;
-
-			/*
-			 * Large Flash or SRAM
-			 */
-			/* ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; */
-			ebc0_cs2_bxap_value = 0x048ff240;
-			ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2;
-			break;
-
-		/*-------------------------------------------------------------------*/
-		case BOOT_FROM_LARGE_FLASH_OR_SRAM:
-		/*-------------------------------------------------------------------*/
-			ebc0_cs0_bxap_value = EBC_BXAP_LARGE_FLASH;
-			ebc0_cs0_bxcr_value = EBC_BXCR_LARGE_FLASH_CS0;
-
-			/* Small flash */
-			ebc0_cs2_bxap_value = EBC_BXAP_SMALL_FLASH;
-			ebc0_cs2_bxcr_value = EBC_BXCR_SMALL_FLASH_CS2;
-			break;
-
-		/*-------------------------------------------------------------------*/
-		default:
-		/*-------------------------------------------------------------------*/
-			/* BOOT_DEVICE_UNKNOWN */
-			break;
-	}
-
-	mtebc(PB0AP, ebc0_cs0_bxap_value);
-	mtebc(PB0CR, ebc0_cs0_bxcr_value);
-	mtebc(PB2AP, ebc0_cs2_bxap_value);
-	mtebc(PB2CR, ebc0_cs2_bxcr_value);
-
-	/*--------------------------------------------------------------------+
-	 | Interrupt controller setup for the AMCC 440SPe Evaluation board.
-	 +--------------------------------------------------------------------+
-	+---------------------------------------------------------------------+
-	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
-	+---------+-----------------------------------+-------+-------+-------+
-	| IRQ 00  | UART0                             | High  | Level | Non   |
-	| IRQ 01  | UART1                             | High  | Level | Non   |
-	| IRQ 02  | IIC0                              | High  | Level | Non   |
-	| IRQ 03  | IIC1                              | High  | Level | Non   |
-	| IRQ 04  | PCI0X0 MSG IN                     | High  | Level | Non   |
-	| IRQ 05  | PCI0X0 CMD Write                  | High  | Level | Non   |
-	| IRQ 06  | PCI0X0 Power Mgt                  | High  | Level | Non   |
-	| IRQ 07  | PCI0X0 VPD Access                 | Rising| Edge  | Non   |
-	| IRQ 08  | PCI0X0 MSI level 0                | High  | Lvl/ed| Non   |
-	| IRQ 09  | External IRQ 15 - (PCI-Express)   | pgm H | Pgm   | Non   |
-	| IRQ 10  | UIC2 Non-critical Int.            | NA    | NA    | Non   |
-	| IRQ 11  | UIC2 Critical Interrupt           | NA    | NA    | Crit  |
-	| IRQ 12  | PCI Express MSI Level 0           | Rising| Edge  | Non   |
-	| IRQ 13  | PCI Express MSI Level 1           | Rising| Edge  | Non   |
-	| IRQ 14  | PCI Express MSI Level 2           | Rising| Edge  | Non   |
-	| IRQ 15  | PCI Express MSI Level 3           | Rising| Edge  | Non   |
-	| IRQ 16  | UIC3 Non-critical Int.            | NA    | NA    | Non   |
-	| IRQ 17  | UIC3 Critical Interrupt           | NA    | NA    | Crit  |
-	| IRQ 18  | External IRQ 14 - (PCI-Express)   | Pgm   | Pgm   | Non   |
-	| IRQ 19  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
-	| IRQ 20  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
-	| IRQ 21  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
-	| IRQ 22  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
-	| IRQ 23  | I2O Inbound Doorbell              | High  | Level | Non   |
-	| IRQ 24  | Inbound Post List FIFO Not Empt   | High  | Level | Non   |
-	| IRQ 25  | I2O Region 0 LL PLB Write         | High  | Level | Non   |
-	| IRQ 26  | I2O Region 1 LL PLB Write         | High  | Level | Non   |
-	| IRQ 27  | I2O Region 0 HB PLB Write         | High  | Level | Non   |
-	| IRQ 28  | I2O Region 1 HB PLB Write         | High  | Level | Non   |
-	| IRQ 29  | GPT Down Count Timer              | Rising| Edge  | Non   |
-	| IRQ 30  | UIC1 Non-critical Int.            | NA    | NA    | Non   |
-	| IRQ 31  | UIC1 Critical Interrupt           | NA    | NA    | Crit. |
-	|----------------------------------------------------------------------
-	| IRQ 32  | Ext. IRQ 13 - (PCI-Express)       |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 33  | MAL Serr                          | High  | Level | Non   |
-	| IRQ 34  | MAL Txde                          | High  | Level | Non   |
-	| IRQ 35  | MAL Rxde                          | High  | Level | Non   |
-	| IRQ 36  | DMC CE or DMC UE                  | High  | Level | Non   |
-	| IRQ 37  | EBC or UART2                      | High  |Lvl Edg| Non   |
-	| IRQ 38  | MAL TX EOB                        | High  | Level | Non   |
-	| IRQ 39  | MAL RX EOB                        | High  | Level | Non   |
-	| IRQ 40  | PCIX0 MSI Level 1                 | High  |Lvl Edg| Non   |
-	| IRQ 41  | PCIX0 MSI level 2                 | High  |Lvl Edg| Non   |
-	| IRQ 42  | PCIX0 MSI level 3                 | High  |Lvl Edg| Non   |
-	| IRQ 43  | L2 Cache                          | Risin | Edge  | Non   |
-	| IRQ 44  | GPT Compare Timer 0               | Risin | Edge  | Non   |
-	| IRQ 45  | GPT Compare Timer 1               | Risin | Edge  | Non   |
-	| IRQ 46  | GPT Compare Timer 2               | Risin | Edge  | Non   |
-	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
-	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
-	| IRQ 49  | Ext. IRQ 12 - PCI-X               |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 50  | Ext. IRQ 11 -                     |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 51  | Ext. IRQ 10 -                     |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 52  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 53  | Ext. IRQ 8                        |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 54  | DMA Error                         | High  | Level | Non   |
-	| IRQ 55  | DMA I2O Error                     | High  | Level | Non   |
-	| IRQ 56  | Serial ROM                        | High  | Level | Non   |
-	| IRQ 57  | PCIX0 Error                       | High  | Edge  | Non   |
-	| IRQ 58  | Ext. IRQ 7-                       |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 59  | Ext. IRQ 6-                       |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 60  | EMAC0 Interrupt                   | High  | Level | Non   |
-	| IRQ 61  | EMAC0 Wake-up                     | High  | Level | Non   |
-	| IRQ 62  | Reserved                          | High  | Level | Non   |
-	| IRQ 63  | XOR                               | High  | Level | Non   |
-	|----------------------------------------------------------------------
-	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
-	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
-	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
-	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
-	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
-	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
-	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
-	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
-	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
-	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
-	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
-	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
-	|---------------------------------------------------------------------
-	| IRQ 96  | PE0 INTA                          | High  | Level | Non   |
-	| IRQ 97  | PE0 INTB                          | High  | Level | Non   |
-	| IRQ 98  | PE0 INTC                          | High  | Level | Non   |
-	| IRQ 99  | PE0 INTD                          | High  | Level | Non   |
-	| IRQ 100 | PE1 INTA                          | High  | Level | Non   |
-	| IRQ 101 | PE1 INTB                          | High  | Level | Non   |
-	| IRQ 102 | PE1 INTC                          | High  | Level | Non   |
-	| IRQ 103 | PE1 INTD                          | High  | Level | Non   |
-	| IRQ 104 | PE2 INTA                          | High  | Level | Non   |
-	| IRQ 105 | PE2 INTB                          | High  | Level | Non   |
-	| IRQ 106 | PE2 INTC                          | High  | Level | Non   |
-	| IRQ 107 | PE2 INTD                          | Risin | Edge  | Non   |
-	| IRQ 108 | PCI Express MSI Level 4           | Risin | Edge  | Non   |
-	| IRQ 109 | PCI Express MSI Level 5           | Risin | Edge  | Non   |
-	| IRQ 110 | PCI Express MSI Level 6           | Risin | Edge  | Non   |
-	| IRQ 111 | PCI Express MSI Level 7           | Risin | Edge  | Non   |
-	| IRQ 116 | PCI Express MSI Level 12          | Risin | Edge  | Non   |
-	| IRQ 112 | PCI Express MSI Level 8           | Risin | Edge  | Non   |
-	| IRQ 113 | PCI Express MSI Level 9           | Risin | Edge  | Non   |
-	| IRQ 114 | PCI Express MSI Level 10          | Risin | Edge  | Non   |
-	| IRQ 115 | PCI Express MSI Level 11          | Risin | Edge  | Non   |
-	| IRQ 117 | PCI Express MSI Level 13          | Risin | Edge  | Non   |
-	| IRQ 118 | PCI Express MSI Level 14          | Risin | Edge  | Non   |
-	| IRQ 119 | PCI Express MSI Level 15          | Risin | Edge  | Non   |
-	| IRQ 120 | PCI Express MSI Level 16          | Risin | Edge  | Non   |
-	| IRQ 121 | PCI Express MSI Level 17          | Risin | Edge  | Non   |
-	| IRQ 122 | PCI Express MSI Level 18          | Risin | Edge  | Non   |
-	| IRQ 123 | PCI Express MSI Level 19          | Risin | Edge  | Non   |
-	| IRQ 124 | PCI Express MSI Level 20          | Risin | Edge  | Non   |
-	| IRQ 125 | PCI Express MSI Level 21          | Risin | Edge  | Non   |
-	| IRQ 126 | PCI Express MSI Level 22          | Risin | Edge  | Non   |
-	| IRQ 127 | PCI Express MSI Level 23          | Risin | Edge  | Non   |
-	+---------+-----------------------------------+-------+-------+------*/
-	/*--------------------------------------------------------------------+
-	 | Put UICs in PowerPC440SPemode.
-	 | Initialise UIC registers.  Clear all interrupts.  Disable all
-	 | interrupts.
-	 | Set critical interrupt values.  Set interrupt polarities.  Set
-	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
-	 | interrupts again.
-	 +-------------------------------------------------------------------*/
-	mtdcr (UIC3SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC3ER, 0x00000000);	/* disable all interrupts */
-	mtdcr (UIC3CR, 0x00000000);	/* Set Critical / Non Critical
-					 * interrupts */
-	mtdcr (UIC3PR, 0xffffffff);	/* Set Interrupt Polarities */
-	mtdcr (UIC3TR, 0x001fffff);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC3VR, 0x00000001);	/* Set Vect base=0,INT31 Highest
-					 * priority */
-	mtdcr (UIC3SR, 0x00000000);	/* clear all  interrupts */
-	mtdcr (UIC3SR, 0xffffffff);	/* clear all  interrupts */
-
-	mtdcr (UIC2SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC2ER, 0x00000000);	/* disable all interrupts */
-	mtdcr (UIC2CR, 0x00000000);	/* Set Critical / Non Critical
-					 * interrupts */
-	mtdcr (UIC2PR, 0xebebebff);	/* Set Interrupt Polarities */
-	mtdcr (UIC2TR, 0x74747400);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC2VR, 0x00000001);	/* Set Vect base=0,INT31 Highest
-					 * priority */
-	mtdcr (UIC2SR, 0x00000000);	/* clear all interrupts */
-	mtdcr (UIC2SR, 0xffffffff);	/* clear all interrupts */
-
-	mtdcr (UIC1SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC1ER, 0x00000000);	/* disable all interrupts */
-	mtdcr (UIC1CR, 0x00000000);	/* Set Critical / Non Critical
-					 * interrupts */
-	mtdcr (UIC1PR, 0xffffffff);	/* Set Interrupt Polarities */
-	mtdcr (UIC1TR, 0x001f8040);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC1VR, 0x00000001);	/* Set Vect base=0,INT31 Highest
-					 * priority */
-	mtdcr (UIC1SR, 0x00000000);	/* clear all interrupts */
-	mtdcr (UIC1SR, 0xffffffff);	/* clear all interrupts */
-
-	mtdcr (UIC0SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr (UIC0ER, 0x00000000);	/* disable all interrupts excepted
-					 * cascade to be checked */
-	mtdcr (UIC0CR, 0x00104001);	/* Set Critical / Non Critical
-					 * interrupts */
-	mtdcr (UIC0PR, 0xffffffff);	/* Set Interrupt Polarities */
-	mtdcr (UIC0TR, 0x010f0004);	/* Set Interrupt Trigger Levels */
-	mtdcr (UIC0VR, 0x00000001);	/* Set Vect base=0,INT31 Highest
-					 * priority */
-	mtdcr (UIC0SR, 0x00000000);	/* clear all interrupts */
-	mtdcr (UIC0SR, 0xffffffff);	/* clear all interrupts */
-
-	mfsdr(SDR0_MFR, mfr);
-	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mtsdr(SDR0_MFR, mfr);
-
-	fpga_init();
-
-	return 0;
-}
-
-int checkboard (void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: Yucca - AMCC 440SPe Evaluation Board");
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-/*
- * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
- * board specific values.
- */
-static int ppc440spe_rev_a(void)
-{
-	if ((get_pvr() == PVR_440SPe_6_RA) || (get_pvr() == PVR_440SPe_RA))
-		return 1;
-	else
-		return 0;
-}
-
-u32 ddr_wrdtr(u32 default_val) {
-	/*
-	 * Yucca boards with 440SPe rev. A need a slightly different setup
-	 * for the MCIF0_WRDTR register.
-	 */
-	if (ppc440spe_rev_a())
-		return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_270_DEG_ADV);
-
-	return default_val;
-}
-
-u32 ddr_clktr(u32 default_val) {
-	/*
-	 * Yucca boards with 440SPe rev. A need a slightly different setup
-	 * for the MCIF0_CLKTR register.
-	 */
-	if (ppc440spe_rev_a())
-		return (SDRAM_CLKTR_CLKP_180_DEG_ADV);
-
-	return default_val;
-}
-
-#if defined(CONFIG_PCI)
-int board_pcie_card_present(int port)
-{
-	u16 reg;
-
-	reg = in_be16((u16 *)FPGA_REG1C);
-	switch(port) {
-	case 0:
-		return !(reg & FPGA_REG1C_PE0_PRSNT);
-	case 1:
-		return !(reg & FPGA_REG1C_PE1_PRSNT);
-	case 2:
-		return !(reg & FPGA_REG1C_PE2_PRSNT);
-	default:
-		return 0;
-	}
-}
-
-/*
- * For the given slot, set endpoint mode, send power to the slot,
- * turn on the green LED and turn off the yellow LED, enable the
- * clock. In endpoint mode reset bit is read only.
- */
-void board_pcie_setup_port(int port, int rootpoint)
-{
-	u16 power, clock, green_led, yellow_led,
-		reset_off, rp, ep;
-
-	switch (port) {
-	case 0:
-		rp = FPGA_REG1C_PE0_ROOTPOINT;
-		ep = 0;
-		break;
-	case 1:
-		rp = 0;
-		ep = FPGA_REG1C_PE1_ENDPOINT;
-		break;
-	case 2:
-		rp = 0;
-		ep = FPGA_REG1C_PE2_ENDPOINT;
-		break;
-
-	default:
-		return;
-	}
-
-	power = FPGA_REG1A_PWRON_ENCODE(port);
-	green_led = FPGA_REG1A_GLED_ENCODE(port);
-	clock = FPGA_REG1A_REFCLK_ENCODE(port);
-	yellow_led = FPGA_REG1A_YLED_ENCODE(port);
-	reset_off = FPGA_REG1C_PERST_ENCODE(port);
-
-	out_be16((u16 *)FPGA_REG1A, ~(power | clock | green_led) &
-		 (yellow_led | in_be16((u16 *)FPGA_REG1A)));
-
-	out_be16((u16 *)FPGA_REG1C, ~(ep | reset_off) &
-		 (rp | in_be16((u16 *)FPGA_REG1C)));
-
-	if (rootpoint) {
-		/*
-		 * Leave device in reset for a while after powering on the
-		 * slot to give it a chance to initialize.
-		 */
-		udelay(250 * 1000);
-
-		out_be16((u16 *)FPGA_REG1C,
-			 reset_off | in_be16((u16 *)FPGA_REG1C));
-	}
-}
-#endif	/* defined(CONFIG_PCI) */
-
-int misc_init_f (void)
-{
-	uint reg;
-
-	out16(FPGA_REG10, (in16(FPGA_REG10) &
-			~(FPGA_REG10_AUTO_NEG_DIS|FPGA_REG10_RESET_ETH)) |
-				FPGA_REG10_10MHZ_ENABLE |
-				FPGA_REG10_100MHZ_ENABLE |
-				FPGA_REG10_GIGABIT_ENABLE |
-				FPGA_REG10_FULL_DUPLEX );
-
-	udelay(10000);	/* wait 10ms */
-
-	out16(FPGA_REG10, (in16(FPGA_REG10) | FPGA_REG10_RESET_ETH));
-
-	/* minimal init for PCIe */
-	/* pci express 0 Endpoint Mode */
-	mfsdr(SDRN_PESDR_DLPSET(0), reg);
-	reg &= (~0x00400000);
-	mtsdr(SDRN_PESDR_DLPSET(0), reg);
-	/* pci express 1 Rootpoint  Mode */
-	mfsdr(SDRN_PESDR_DLPSET(1), reg);
-	reg |= 0x00400000;
-	mtsdr(SDRN_PESDR_DLPSET(1), reg);
-	/* pci express 2 Rootpoint  Mode */
-	mfsdr(SDRN_PESDR_DLPSET(2), reg);
-	reg |= 0x00400000;
-	mtsdr(SDRN_PESDR_DLPSET(2), reg);
-
-	out16(FPGA_REG1C,(in16 (FPGA_REG1C) &
-				~FPGA_REG1C_PE0_ROOTPOINT &
-				~FPGA_REG1C_PE1_ENDPOINT  &
-				~FPGA_REG1C_PE2_ENDPOINT));
-
-	return 0;
-}
-
-void fpga_init(void)
-{
-	/*
-	 * by default sdram access is disabled by fpga
-	 */
-	out16(FPGA_REG10, (in16 (FPGA_REG10) |
-				FPGA_REG10_SDRAM_ENABLE |
-				FPGA_REG10_ENABLE_DISPLAY ));
-
-	return;
-}
-
-/*---------------------------------------------------------------------------+
- | onboard_pci_arbiter_selected => from EPLD
- +---------------------------------------------------------------------------*/
-int onboard_pci_arbiter_selected(int core_pci)
-{
-#if 0
-	unsigned long onboard_pci_arbiter_sel;
-
-	onboard_pci_arbiter_sel = in16(FPGA_REG0) & FPGA_REG0_EXT_ARB_SEL_MASK;
-
-	if (onboard_pci_arbiter_sel == FPGA_REG0_EXT_ARB_SEL_EXTERNAL)
-		return (BOARD_OPTION_SELECTED);
-	else
-#endif
-	return (BOARD_OPTION_NOT_SELECTED);
-}
-
-int board_eth_init(bd_t *bis)
-{
-	cpu_eth_init(bis);
-	return pci_eth_init(bis);
-}
diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h
deleted file mode 100644
index ac9e5ae..0000000
--- a/board/amcc/yucca/yucca.h
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __YUCCA_H_
-#define __YUCCA_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*----------------------------------------------------------------------------+
-| Defines
-+----------------------------------------------------------------------------*/
-
-#define TMR_FREQ_EXT		25000000
-#define BOARD_UART_CLOCK	11059200
-
-#define BOARD_OPTION_SELECTED		1
-#define BOARD_OPTION_NOT_SELECTED	0
-
-#define ENGINEERING_CLOCK_CHECKING "clk_chk"
-#define ENGINEERING_EXTERNAL_CLOCK "ext_clk"
-
-#define ENGINEERING_CLOCK_CHECKING_DATA	1
-#define ENGINEERING_EXTERNAL_CLOCK_DATA	2
-
-/* ethernet definition */
-#define MAX_ENETMODE_PARM	3
-#define ENETMODE_NEG		0
-#define ENETMODE_SPEED		1
-#define ENETMODE_DUPLEX		2
-
-#define ENETMODE_AUTONEG	0
-#define ENETMODE_NO_AUTONEG	1
-#define ENETMODE_10		2
-#define ENETMODE_100		3
-#define ENETMODE_1000		4
-#define ENETMODE_HALF		5
-#define ENETMODE_FULL		6
-
-#define NUM_TLB_ENTRIES          64
-
-/* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */
-#define MICRON_SPD_JEDEC_ID 0x2c
-
-/*----------------------------------------------------------------------------+
-| TLB specific defines.
-+----------------------------------------------------------------------------*/
-#define TLB_256MB_ALIGN_MASK	0xF0000000
-#define TLB_16MB_ALIGN_MASK	0xFF000000
-#define TLB_1MB_ALIGN_MASK	0xFFF00000
-#define TLB_256KB_ALIGN_MASK	0xFFFC0000
-#define TLB_64KB_ALIGN_MASK	0xFFFF0000
-#define TLB_16KB_ALIGN_MASK	0xFFFFC000
-#define TLB_4KB_ALIGN_MASK	0xFFFFF000
-#define TLB_1KB_ALIGN_MASK	0xFFFFFC00
-#define TLB_256MB_SIZE		0x10000000
-#define TLB_16MB_SIZE		0x01000000
-#define TLB_1MB_SIZE		0x00100000
-#define TLB_256KB_SIZE		0x00040000
-#define TLB_64KB_SIZE		0x00010000
-#define TLB_16KB_SIZE		0x00004000
-#define TLB_4KB_SIZE		0x00001000
-#define TLB_1KB_SIZE		0x00000400
-
-#define TLB_WORD0_EPN_MASK	0xFFFFFC00
-#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD0_V_MASK	0x00000200
-#define TLB_WORD0_V_ENABLE	0x00000200
-#define TLB_WORD0_V_DISABLE	0x00000000
-#define TLB_WORD0_TS_MASK	0x00000100
-#define TLB_WORD0_TS_1		0x00000100
-#define TLB_WORD0_TS_0		0x00000000
-#define TLB_WORD0_SIZE_MASK	0x000000F0
-#define TLB_WORD0_SIZE_1KB	0x00000000
-#define TLB_WORD0_SIZE_4KB	0x00000010
-#define TLB_WORD0_SIZE_16KB	0x00000020
-#define TLB_WORD0_SIZE_64KB	0x00000030
-#define TLB_WORD0_SIZE_256KB	0x00000040
-#define TLB_WORD0_SIZE_1MB	0x00000050
-#define TLB_WORD0_SIZE_16MB	0x00000070
-#define TLB_WORD0_SIZE_256MB	0x00000090
-#define TLB_WORD0_TPAR_MASK	0x0000000F
-#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
-#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
-
-#define TLB_WORD1_RPN_MASK	0xFFFFFC00
-#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD1_PAR1_MASK	0x00000300
-#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
-#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
-#define TLB_WORD1_PAR1_0	0x00000000
-#define TLB_WORD1_PAR1_1	0x00000100
-#define TLB_WORD1_PAR1_2	0x00000200
-#define TLB_WORD1_PAR1_3	0x00000300
-#define TLB_WORD1_ERPN_MASK	0x0000000F
-#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
-#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
-
-#define TLB_WORD2_PAR2_MASK	0xC0000000
-#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30)
-#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03)
-#define TLB_WORD2_PAR2_0	0x00000000
-#define TLB_WORD2_PAR2_1	0x40000000
-#define TLB_WORD2_PAR2_2	0x80000000
-#define TLB_WORD2_PAR2_3	0xC0000000
-#define TLB_WORD2_U0_MASK	0x00008000
-#define TLB_WORD2_U0_ENABLE	0x00008000
-#define TLB_WORD2_U0_DISABLE	0x00000000
-#define TLB_WORD2_U1_MASK	0x00004000
-#define TLB_WORD2_U1_ENABLE	0x00004000
-#define TLB_WORD2_U1_DISABLE	0x00000000
-#define TLB_WORD2_U2_MASK	0x00002000
-#define TLB_WORD2_U2_ENABLE	0x00002000
-#define TLB_WORD2_U2_DISABLE	0x00000000
-#define TLB_WORD2_U3_MASK	0x00001000
-#define TLB_WORD2_U3_ENABLE	0x00001000
-#define TLB_WORD2_U3_DISABLE	0x00000000
-#define TLB_WORD2_W_MASK	0x00000800
-#define TLB_WORD2_W_ENABLE	0x00000800
-#define TLB_WORD2_W_DISABLE	0x00000000
-#define TLB_WORD2_I_MASK	0x00000400
-#define TLB_WORD2_I_ENABLE	0x00000400
-#define TLB_WORD2_I_DISABLE	0x00000000
-#define TLB_WORD2_M_MASK	0x00000200
-#define TLB_WORD2_M_ENABLE	0x00000200
-#define TLB_WORD2_M_DISABLE	0x00000000
-#define TLB_WORD2_G_MASK	0x00000100
-#define TLB_WORD2_G_ENABLE	0x00000100
-#define TLB_WORD2_G_DISABLE	0x00000000
-#define TLB_WORD2_E_MASK	0x00000080
-#define TLB_WORD2_E_ENABLE	0x00000080
-#define TLB_WORD2_E_DISABLE	0x00000000
-#define TLB_WORD2_UX_MASK	0x00000020
-#define TLB_WORD2_UX_ENABLE	0x00000020
-#define TLB_WORD2_UX_DISABLE	0x00000000
-#define TLB_WORD2_UW_MASK	0x00000010
-#define TLB_WORD2_UW_ENABLE	0x00000010
-#define TLB_WORD2_UW_DISABLE	0x00000000
-#define TLB_WORD2_UR_MASK	0x00000008
-#define TLB_WORD2_UR_ENABLE	0x00000008
-#define TLB_WORD2_UR_DISABLE	0x00000000
-#define TLB_WORD2_SX_MASK	0x00000004
-#define TLB_WORD2_SX_ENABLE	0x00000004
-#define TLB_WORD2_SX_DISABLE	0x00000000
-#define TLB_WORD2_SW_MASK	0x00000002
-#define TLB_WORD2_SW_ENABLE	0x00000002
-#define TLB_WORD2_SW_DISABLE	0x00000000
-#define TLB_WORD2_SR_MASK	0x00000001
-#define TLB_WORD2_SR_ENABLE	0x00000001
-#define TLB_WORD2_SR_DISABLE	0x00000000
-
-/*----------------------------------------------------------------------------+
-| Board specific defines.
-+----------------------------------------------------------------------------*/
-#define NONCACHE_MEMORY_SIZE     (64*1024)
-#define NONCACHE_AREA0_ENDOFFSET (64*1024)
-#define NONCACHE_AREA1_ENDOFFSET (32*1024)
-
-#define FLASH_SECTORSIZE	0x00010000
-
-/* SDRAM MICRON */
-#define SDRAM_MICRON		0x2C
-
-#define SDRAM_TRUE		1
-#define SDRAM_FALSE		0
-#define SDRAM_DDR1		1
-#define SDRAM_DDR2		2
-#define SDRAM_NONE		0
-#define MAXDIMMS		2		/* Changes le 12/01/05 pour 1.6 */
-#define MAXRANKS		4		/* Changes le 12/01/05 pour 1.6 */
-#define MAXBANKSPERDIMM		2
-#define MAXRANKSPERDIMM		2
-#define MAXBXCF			4		/* Changes le 12/01/05 pour 1.6 */
-#define MAXSDRAMMEMORY		0xFFFFFFFF	/* 4GB */
-#define ERROR_STR_LENGTH	256
-#define MAX_SPD_BYTES		256		/* Max number of bytes on the DIMM's SPD EEPROM */
-
-/*----------------------------------------------------------------------------+
-| SDR Configuration registers
-+----------------------------------------------------------------------------*/
-/* Serial Device Strap Reg 0 */
-#define sdr_pstrp0	0x0040
-
-#define	SDR0_SDSTP1_EBC_ROM_BS_MASK	0x00000080 /* EBC Boot bus width Mask */
-#define	SDR0_SDSTP1_EBC_ROM_BS_16BIT	0x00000080 /* EBC 16 Bits */
-#define	SDR0_SDSTP1_EBC_ROM_BS_8BIT	0x00000000 /* EBC  8 Bits */
-
-#define	SDR0_SDSTP1_BOOT_SEL_MASK	0x00080000 /* Boot device Selection Mask */
-#define	SDR0_SDSTP1_BOOT_SEL_EBC	0x00000000 /* EBC */
-#define	SDR0_SDSTP1_BOOT_SEL_PCI	0x00080000 /* PCI */
-
-#define	SDR0_SDSTP1_EBC_SIZE_MASK	0x00000060 /* Boot rom size Mask */
-#define	SDR0_SDSTP1_BOOT_SIZE_16MB	0x00000060 /* 16 MB */
-#define	SDR0_SDSTP1_BOOT_SIZE_8MB	0x00000040 /*  8 MB */
-#define	SDR0_SDSTP1_BOOT_SIZE_4MB	0x00000020 /*  4 MB */
-#define	SDR0_SDSTP1_BOOT_SIZE_2MB	0x00000000 /*  2 MB */
-
-/* Serial Device Enabled - Addr = 0xA8 */
-#define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5
-/* Serial Device Enabled - Addr = 0xA4 */
-#define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7
-
-/* Pin Straps Reg */
-#define SDR0_PSTRP0			0x0040
-#define SDR0_PSTRP0_BOOTSTRAP_MASK	0xE0000000  /* Strap Bits */
-
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0	0x00000000  /* Default strap settings 0 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1	0x20000000  /* Default strap settings 1 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2	0x40000000  /* Default strap settings 2 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3	0x60000000  /* Default strap settings 3 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4	0x80000000  /* Default strap settings 4 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5	0xA0000000  /* Default strap settings 5 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6	0xC0000000  /* Default strap settings 6 */
-#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7	0xE0000000  /* Default strap settings 7 */
-
-/* fpgareg - defines are in include/config/YUCCA.h */
-
-#define SDR0_CUST0_ENET3_MASK		0x00000080
-#define SDR0_CUST0_ENET3_COPPER		0x00000000
-#define SDR0_CUST0_ENET3_FIBER		0x00000080
-#define SDR0_CUST0_RGMII3_MASK		0x00000070
-#define SDR0_CUST0_RGMII3_ENCODE(n)	((((unsigned long)(n))&0x7)<<4)
-#define SDR0_CUST0_RGMII3_DECODE(n)	((((unsigned long)(n))>>4)&0x07)
-#define SDR0_CUST0_RGMII3_DISAB		0x00000000
-#define SDR0_CUST0_RGMII3_RTBI		0x00000040
-#define SDR0_CUST0_RGMII3_RGMII		0x00000050
-#define SDR0_CUST0_RGMII3_TBI		0x00000060
-#define SDR0_CUST0_RGMII3_GMII		0x00000070
-#define SDR0_CUST0_ENET2_MASK		0x00000008
-#define SDR0_CUST0_ENET2_COPPER		0x00000000
-#define SDR0_CUST0_ENET2_FIBER		0x00000008
-#define SDR0_CUST0_RGMII2_MASK		0x00000007
-#define SDR0_CUST0_RGMII2_ENCODE(n)	((((unsigned long)(n))&0x7)<<0)
-#define SDR0_CUST0_RGMII2_DECODE(n)	((((unsigned long)(n))>>0)&0x07)
-#define SDR0_CUST0_RGMII2_DISAB		0x00000000
-#define SDR0_CUST0_RGMII2_RTBI		0x00000004
-#define SDR0_CUST0_RGMII2_RGMII		0x00000005
-#define SDR0_CUST0_RGMII2_TBI		0x00000006
-#define SDR0_CUST0_RGMII2_GMII		0x00000007
-
-#define ONE_MILLION			1000000
-#define ONE_BILLION			1000000000
-
-/*----------------------------------------------------------------------------+
-|                               X
-|                              XX
-| XX  XXX   XXXXX   XX XXX    XXXXX
-| XX  XX        X    XXX XX    XX
-| XX  XX   XXXXXX    XX        XX
-| XX  XX   X   XX    XX        XX XX
-|  XXX XX  XXXXX X  XXXX        XXX
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Declare Configuration values
-+----------------------------------------------------------------------------*/
-
-typedef enum config_selection {
-	CONFIG_NOT_SELECTED,
-	CONFIG_SELECTED
-} config_selection_t;
-
-typedef enum config_list {
-	UART2_IN_SERVICE_MODE,
-	CPU_TRACE_MODE,
-	UART1_CTS_RTS,
-	CONFIG_NB
-} config_list_t;
-
-#define MAX_CONFIG_SELECT_NB			3
-
-#define BOARD_INFO_UART2_IN_SERVICE_MODE	1
-#define BOARD_INFO_CPU_TRACE_MODE		2
-#define BOARD_INFO_UART1_CTS_RTS_MODE		4
-
-void force_bup_config_selection(config_selection_t *confgi_select_P);
-void update_config_selection_table(config_selection_t *config_select_P);
-void display_config_selection(config_selection_t *config_select_P);
-
-/*----------------------------------------------------------------------------+
-|                     XX
-|
-|   XXXX    XX XXX   XXX     XXXX
-|  XX        XX  XX   XX    XX  XX
-|  XX  XXX   XX  XX   XX    XX  XX
-|  XX  XX    XXXXX    XX    XX  XX
-|   XXXX     XX      XXXX    XXXX
-|           XXXX
-|
-|
-|
-| +------------------------------------------------------------------+
-| |  GPIO/Secondary func | Primary Function | I/O | Alternate1 | I/O |
-| +----------------------+------------------+-----+------------+-----+
-| |                      |                  |     |            |     |
-| | GPIO0_0              | PCIX0REQ2_N      | I/O |  TRCCLK    |     |
-| | GPIO0_1              | PCIX0REQ3_N      | I/O |  TRCBS0    |     |
-| | GPIO0_2              | PCIX0GNT2_N      | I/O |  TRCBS1    |     |
-| | GPIO0_3              | PCIX0GNT3_N      | I/O |  TRCBS2    |     |
-| | GPIO0_4              | PCIX1REQ2_N      | I/O |  TRCES0    |     |
-| | GPIO0_5              | PCIX1REQ3_N      | I/O |  TRCES1    |     |
-| | GPIO0_6              | PCIX1GNT2_N      | I/O |  TRCES2    | NA  |
-| | GPIO0_7              | PCIX1GNT3_N      | I/O |  TRCES3    | NA  |
-| | GPIO0_8              | PERREADY         |  I  |  TRCES4    | NA  |
-| | GPIO0_9              | PERCS1_N         |  O  |  TRCTS0    | NA  |
-| | GPIO0_10             | PERCS2_N         |  O  |  TRCTS1    | NA  |
-| | GPIO0_11             | IRQ0             |  I  |  TRCTS2    | NA  |
-| | GPIO0_12             | IRQ1             |  I  |  TRCTS3    | NA  |
-| | GPIO0_13             | IRQ2             |  I  |  TRCTS4    | NA  |
-| | GPIO0_14             | IRQ3             |  I  |  TRCTS5    | NA  |
-| | GPIO0_15             | IRQ4             |  I  |  TRCTS6    | NA  |
-| | GPIO0_16             | IRQ5             |  I  |  UART2RX   |  I  |
-| | GPIO0_17             | PERBE0_N         |  O  |  UART2TX   |  O  |
-| | GPIO0_18             | PCI0GNT0_N       | I/O |  NA        | NA  |
-| | GPIO0_19             | PCI0GNT1_N       | I/O |  NA        | NA  |
-| | GPIO0_20             | PCI0REQ0_N       | I/O |  NA        | NA  |
-| | GPIO0_21             | PCI0REQ1_N       | I/O |  NA        | NA  |
-| | GPIO0_22             | PCI1GNT0_N       | I/O |  NA        | NA  |
-| | GPIO0_23             | PCI1GNT1_N       | I/O |  NA        | NA  |
-| | GPIO0_24             | PCI1REQ0_N       | I/O |  NA        | NA  |
-| | GPIO0_25             | PCI1REQ1_N       | I/O |  NA        | NA  |
-| | GPIO0_26             | PCI2GNT0_N       | I/O |  NA        | NA  |
-| | GPIO0_27             | PCI2GNT1_N       | I/O |  NA        | NA  |
-| | GPIO0_28             | PCI2REQ0_N       | I/O |  NA        | NA  |
-| | GPIO0_29             | PCI2REQ1_N       | I/O |  NA        | NA  |
-| | GPIO0_30             | UART1RX          |  I  |  NA        | NA  |
-| | GPIO0_31             | UART1TX          |  O  |  NA        | NA  |
-| |                      |                  |     |            |     |
-| +----------------------+------------------+-----+------------+-----+
-|
-+----------------------------------------------------------------------------*/
-
-unsigned long auto_calc_speed(void);
-/*----------------------------------------------------------------------------+
-| Prototypes
-+----------------------------------------------------------------------------*/
-void print_evb440spe_info(void);
-
-int onboard_pci_arbiter_selected(int core_pci);
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* __YUCCA_H_ */
diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c
deleted file mode 100644
index 9541817..0000000
--- a/board/esd/common/cmd_loadpci.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * (C) Copyright 2005-2008
- * Matthias Fuchs, esd GmbH Germany, matthias.fuchs@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <console.h>
-#if !defined(CONFIG_440)
-#include <asm/4xx_pci.h>
-#endif
-
-#if defined(CONFIG_CMD_BSP)
-#define ADDRMASK 0xfffff000
-
-/*
- * Command loadpci: wait for signal from host and boot image.
- */
-int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	u32 *ptr = 0;
-	int count = 0;
-	int count2 = 0;
-	char addr[16];
-	char str[] = "\\|/-";
-	u32 la, ptm1la;
-
-#if defined(CONFIG_440)
-	ptm1la = in32r(PCIL0_PTM1LA);
-#else
-	ptm1la = in32r(PTM1LA);
-#endif
-	while(1) {
-		/*
-		 * Mark sync address
-		 */
-		ptr = (u32 *)ptm1la;
-		memset(ptr, 0, 0x20);
-
-		*ptr = 0xffffffff;
-		puts("\nWaiting for action from pci host -");
-
-		/*
-		 * Wait for host to write the start address
-		 */
-		while (*ptr == 0xffffffff) {
-			count++;
-			if (!(count % 100)) {
-				count2++;
-				putc(0x08); /* backspace */
-				putc(str[count2 % 4]);
-			}
-
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			udelay(1000);
-		}
-
-		printf("\nGot bootcode %08x: ", *ptr);
-		la = ptm1la + (*ptr & ADDRMASK);
-		sprintf(addr, "%08x", la);
-
-		switch (*ptr & ~ADDRMASK) {
-		case 0:
-			/*
-			 * Boot image via bootm
-			 */
-			printf("booting image at addr 0x%s ...\n", addr);
-			setenv("loadaddr", addr);
-			do_bootm(cmdtp, 0, 0, NULL);
-			break;
-
-		case 1:
-			/*
-			 * Boot image via "source" command
-			 */
-			printf("executing script at addr 0x%s ...\n", addr);
-			source(la, NULL);
-			break;
-
-		case 2:
-			/*
-			 * Call run_cmd
-			 */
-			printf("running command at addr 0x%s ...\n", addr);
-			run_command((char *)la, 0);
-			break;
-
-		default:
-			printf("unhandled boot method\n");
-			break;
-		}
-	}
-}
-
-U_BOOT_CMD(
-	loadpci,	1,	1,	do_loadpci,
-	"Wait for pci bootcmd and boot it",
-	""
-);
-
-#endif
diff --git a/board/esd/common/esd405ep_nand.c b/board/esd/common/esd405ep_nand.c
deleted file mode 100644
index 51ac10c..0000000
--- a/board/esd/common/esd405ep_nand.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2007
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-#if defined(CONFIG_CMD_NAND)
-#include <asm/io.h>
-#include <nand.h>
-
-/*
- * hardware specific access to control-lines
- */
-static void esd405ep_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd_to_nand(mtd);
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if ( ctrl & NAND_CLE )
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_CLE);
-		else
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_NAND_CLE);
-		if ( ctrl & NAND_ALE )
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_ALE);
-		else
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_NAND_ALE);
-		if ( ctrl & NAND_NCE )
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_NAND_CE);
-		else
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_CE);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-
-/*
- * read device ready pin
- */
-static int esd405ep_nand_device_ready(struct mtd_info *mtdinfo)
-{
-	if (in_be32((void *)GPIO0_IR) & CONFIG_SYS_NAND_RDY)
-		return 1;
-	return 0;
-}
-
-
-int board_nand_init(struct nand_chip *nand)
-{
-	/*
-	 * Set NAND-FLASH GPIO signals to defaults
-	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_CE);
-
-	/*
-	 * Initialize nand_chip structure
-	 */
-	nand->cmd_ctrl = esd405ep_nand_hwcontrol;
-	nand->dev_ready = esd405ep_nand_device_ready;
-	nand->ecc.mode = NAND_ECC_SOFT;
-	nand->chip_delay = NAND_BIG_DELAY_US;
-	nand->options = NAND_SAMSUNG_LP_OPTIONS;
-	return 0;
-}
-#endif
diff --git a/board/esd/common/flash.c b/board/esd/common/flash.c
deleted file mode 100644
index e3512c7..0000000
--- a/board/esd/common/flash.c
+++ /dev/null
@@ -1,659 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#ifdef __PPC__
-#include <asm/ppc4xx.h>
-#endif
-#include <asm/processor.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-	short n;
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U)) {
-	    for (i = 0; i < info->sector_count; i++)
-		info->start[i] = base + (i * 0x00010000);
-	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323B) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324B)) {
-		/* set sector offsets for bottom boot block type	*/
-		for (i=0; i<8; ++i) {		/*  8 x 8k boot sectors	*/
-			info->start[i] = base;
-			base += 8 << 10;
-		}
-		while (i < info->sector_count) {	/* 64k regular sectors	*/
-			info->start[i] = base;
-			base += 64 << 10;
-			++i;
-		}
-	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323T) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324T)) {
-		/* set sector offsets for top boot block type		*/
-		base += info->size;
-		i = info->sector_count;
-		for (n=0; n<8; ++n) {		/*  8 x 8k boot sectors	*/
-			base -= 8 << 10;
-			--i;
-			info->start[i] = base;
-		}
-		while (i > 0) {			/* 64k regular sectors	*/
-			base -= 64 << 10;
-			--i;
-			info->start[i] = base;
-		}
-	} else {
-	    if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	    } else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	    }
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_EXCEL:	printf ("Excel Semiconductor "); break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 M, top sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 M, bottom sector)\n");
-				break;
-	case FLASH_AMDL322T:	printf ("AM29DL322T (32 M, top sector)\n");
-				break;
-	case FLASH_AMDL322B:	printf ("AM29DL322B (32 M, bottom sector)\n");
-				break;
-	case FLASH_AMDL323T:	printf ("AM29DL323T (32 M, top sector)\n");
-				break;
-	case FLASH_AMDL323B:	printf ("AM29DL323B (32 M, bottom sector)\n");
-				break;
-	case FLASH_AM640U:	printf ("AM29LV640D (64 M, uniform sector)\n");
-				break;
-	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
-				break;
-	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
-				break;
-	case FLASH_SST320:	printf ("SST39LF/VF320 (32 Mbit, uniform sector size)\n");
-				break;
-	case FLASH_SST640:	printf ("SST39LF/VF640 (64 Mbit, uniform sector size)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count-1))
-		  size = info->start[i+1] - info->start[i];
-		else
-		  size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *)info->start[i];
-		size = size >> 2;        /* divide by 4 for longword access */
-		for (k=0; k<size; k++)
-		  {
-		    if (*flash++ != 0xffffffff)
-		      {
-			erased = 0;
-			break;
-		      }
-		  }
-
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		/* print empty and read-only info */
-		printf (" %08lX%s%s",
-			info->start[i],
-			erased ? " E" : "  ",
-			info->protect[i] ? "RO " : "   ");
-#else
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-#endif
-
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	short n;
-	CONFIG_SYS_FLASH_WORD_SIZE value;
-	ulong base = (ulong)addr;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
-	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
-	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00900090;
-
-	value = addr2[CONFIG_SYS_FLASH_READ0];
-
-	switch (value) {
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (CONFIG_SYS_FLASH_WORD_SIZE)FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_MANUFACT:
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	case (CONFIG_SYS_FLASH_WORD_SIZE)EXCEL_MANUFACT:
-		info->flash_id = FLASH_MAN_EXCEL;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr2[CONFIG_SYS_FLASH_READ1];		/* device ID		*/
-
-	switch (value) {
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;				/* => 0.5 MB		*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;				/* => 0.5 MB		*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 71;
-		info->size = 0x00400000;  break;	/* => 4 MB	*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 71;
-		info->size = 0x00400000;  break;	/* => 4 MB	*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322T:
-		info->flash_id += FLASH_AMDL322T;
-		info->sector_count = 71;
-		info->size = 0x00400000;  break;	/* => 4 MB	*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322B:
-		info->flash_id += FLASH_AMDL322B;
-		info->sector_count = 71;
-		info->size = 0x00400000;  break;	/* => 4 MB	*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323T:
-		info->flash_id += FLASH_AMDL323T;
-		info->sector_count = 71;
-		info->size = 0x00400000;  break;	/* => 4 MB	*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323B:
-		info->flash_id += FLASH_AMDL323B;
-		info->sector_count = 71;
-		info->size = 0x00400000;  break;	/* => 4 MB	*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV640U:
-		info->flash_id += FLASH_AM640U;
-		info->sector_count = 128;
-		info->size = 0x00800000;  break;	/* => 8 MB	*/
-
-#if !(defined(CONFIG_ADCIOP) || defined(CONFIG_DASA_SIM))
-	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF800A:
-		info->flash_id += FLASH_SST800A;
-		info->sector_count = 16;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF160A:
-	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF1601:
-	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF1602:
-		info->flash_id += FLASH_SST160A;
-		info->sector_count = 32;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF3201:
-	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF3202:
-		info->flash_id += FLASH_SST320;
-		info->sector_count = 64;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-
-	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF6401:
-	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF6402:
-		info->flash_id += FLASH_SST640;
-		info->sector_count = 128;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-#endif
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U)) {
-	    for (i = 0; i < info->sector_count; i++)
-		info->start[i] = base + (i * 0x00010000);
-	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323B) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324B)) {
-		/* set sector offsets for bottom boot block type	*/
-		for (i=0; i<8; ++i) {		/*  8 x 8k boot sectors	*/
-			info->start[i] = base;
-			base += 8 << 10;
-		}
-		while (i < info->sector_count) {	/* 64k regular sectors	*/
-			info->start[i] = base;
-			base += 64 << 10;
-			++i;
-		}
-	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323T) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
-		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324T)) {
-		/* set sector offsets for top boot block type		*/
-		base += info->size;
-		i = info->sector_count;
-		for (n=0; n<8; ++n) {		/*  8 x 8k boot sectors	*/
-			base -= 8 << 10;
-			--i;
-			info->start[i] = base;
-		}
-		while (i > 0) {			/* 64k regular sectors	*/
-			base -= 64 << 10;
-			--i;
-			info->start[i] = base;
-		}
-	} else {
-	    if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	    } else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	    }
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
-		if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_AMD)
-		  info->protect[i] = 0;
-		else
-		  info->protect[i] = addr2[CONFIG_SYS_FLASH_READ2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-	int i;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-		    addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[sect]);
-		    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
-			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
-			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
-			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
-			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
-			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00500050;  /* block erase */
-			for (i=0; i<50; i++)
-			  udelay(1000);  /* wait 1 ms */
-		    } else {
-			if (sect == s_first) {
-			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
-			    addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
-			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
-			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
-			    addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
-			}
-			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
-		    }
-		    l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[l_sect]);
-	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) != (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
-	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	ulong *data_ptr = &data;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest;
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)data_ptr;
-	ulong start;
-	int flag;
-	int i;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	for (i=0; i<4/sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++)
-	  {
-	    addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
-	    addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
-	    addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00A000A0;
-
-	    dest2[i] = data2[i];
-
-	    /* re-enable interrupts if necessary */
-	    if (flag)
-	      enable_interrupts();
-
-	    /* data polling for D7 */
-	    start = get_timer (0);
-	    while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) !=
-		   (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-		return (1);
-	      }
-	    }
-	  }
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/esd/common/fpga.c b/board/esd/common/fpga.c
deleted file mode 100644
index 5c70b47..0000000
--- a/board/esd/common/fpga.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * (C) Copyright 2001-2004
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef FPGA_DEBUG
-#define DBG(x...) printf(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-#define MAX_ONES               226
-
-#ifdef CONFIG_SYS_FPGA_PRG
-# define FPGA_PRG              CONFIG_SYS_FPGA_PRG	/* FPGA program pin (ppc output) */
-# define FPGA_CLK              CONFIG_SYS_FPGA_CLK	/* FPGA clk pin (ppc output)    */
-# define FPGA_DATA             CONFIG_SYS_FPGA_DATA	/* FPGA data pin (ppc output)  */
-# define FPGA_DONE             CONFIG_SYS_FPGA_DONE	/* FPGA done pin (ppc input)   */
-# define FPGA_INIT             CONFIG_SYS_FPGA_INIT	/* FPGA init pin (ppc input)   */
-#else
-# define FPGA_PRG              0x04000000	/* FPGA program pin (ppc output) */
-# define FPGA_CLK              0x02000000	/* FPGA clk pin (ppc output)     */
-# define FPGA_DATA             0x01000000	/* FPGA data pin (ppc output)    */
-# define FPGA_DONE             0x00800000	/* FPGA done pin (ppc input)     */
-# define FPGA_INIT             0x00400000	/* FPGA init pin (ppc input)     */
-#endif
-
-#define ERROR_FPGA_PRG_INIT_LOW  -1	/* Timeout after PRG* asserted   */
-#define ERROR_FPGA_PRG_INIT_HIGH -2	/* Timeout after PRG* deasserted */
-#define ERROR_FPGA_PRG_DONE      -3	/* Timeout after programming     */
-
-#ifndef SET_FPGA
-# define SET_FPGA(data)         out_be32((void *)GPIO0_OR, data)
-#endif
-
-#ifdef FPGA_PROG_ACTIVE_HIGH
-# define FPGA_PRG_LOW           FPGA_PRG
-# define FPGA_PRG_HIGH          0
-#else
-# define FPGA_PRG_LOW           0
-# define FPGA_PRG_HIGH          FPGA_PRG
-#endif
-
-#define FPGA_CLK_LOW            0
-#define FPGA_CLK_HIGH           FPGA_CLK
-
-#define FPGA_DATA_LOW           0
-#define FPGA_DATA_HIGH          FPGA_DATA
-
-#define FPGA_WRITE_1 {                                                                   \
-	SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW  | FPGA_DATA_HIGH);  /* set clock to 0 */  \
-	SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW  | FPGA_DATA_HIGH);  /* set data to 1  */  \
-	SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);  /* set clock to 1 */  \
-	SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);}	/* set data to 1  */
-
-#define FPGA_WRITE_0 {                                                    \
-	SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW  | FPGA_DATA_HIGH);  /* set clock to 0 */  \
-	SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW  | FPGA_DATA_LOW);   /* set data to 0  */  \
-	SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_LOW);   /* set clock to 1 */  \
-	SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);}	/* set data to 1  */
-
-#ifndef FPGA_DONE_STATE
-# define FPGA_DONE_STATE (in_be32((void *)GPIO0_IR) & FPGA_DONE)
-#endif
-#ifndef FPGA_INIT_STATE
-# define FPGA_INIT_STATE (in_be32((void *)GPIO0_IR) & FPGA_INIT)
-#endif
-
-
-static int fpga_boot (const unsigned char *fpgadata, int size)
-{
-	int i, index, len;
-	int count;
-	unsigned char b;
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
-	int j;
-#else
-	int bit;
-#endif
-
-	/* display infos on fpgaimage */
-	index = 15;
-	for (i = 0; i < 4; i++) {
-		len = fpgadata[index];
-		DBG ("FPGA: %s\n", &(fpgadata[index + 1]));
-		index += len + 3;
-	}
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
-	/* search for preamble 0xFFFFFFFF */
-	while (1) {
-		if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
-		    && (fpgadata[index + 2] == 0xff)
-		    && (fpgadata[index + 3] == 0xff))
-			break;	/* preamble found */
-		else
-			index++;
-	}
-#else
-	/* search for preamble 0xFF2X */
-	for (index = 0; index < size - 1; index++) {
-		if ((fpgadata[index] == 0xff)
-		    && ((fpgadata[index + 1] & 0xf0) == 0x30))
-			break;
-	}
-	index += 2;
-#endif
-
-	DBG ("FPGA: configdata starts at position 0x%x\n", index);
-	DBG ("FPGA: length of fpga-data %d\n", size - index);
-
-	/*
-	 * Setup port pins for fpga programming
-	 */
-#ifndef CONFIG_M5249
-	out_be32 ((void *)GPIO0_ODR, 0x00000000); /* no open drain pins */
-	/* setup for output */
-	out_be32 ((void *)GPIO0_TCR,
-		  in_be32 ((void *)GPIO0_TCR) |
-		  FPGA_PRG | FPGA_CLK | FPGA_DATA);
-#endif
-	SET_FPGA (FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);	/* set pins to high */
-
-	DBG ("%s, ", (FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE");
-	DBG ("%s\n", (FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT");
-
-	/*
-	 * Init fpga by asserting and deasserting PROGRAM*
-	 */
-	SET_FPGA (FPGA_PRG_LOW | FPGA_CLK_HIGH | FPGA_DATA_HIGH);	/* set prog active */
-
-	/* Wait for FPGA init line low */
-	count = 0;
-	while (FPGA_INIT_STATE) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout - 100us max, so use 3ms */
-		if (count++ > 3) {
-			DBG ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_INIT_LOW;
-		}
-	}
-
-	DBG ("%s, ", (FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE");
-	DBG ("%s\n", (FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT");
-
-	/* deassert PROGRAM* */
-	SET_FPGA (FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);	/* set prog inactive */
-
-	/* Wait for FPGA end of init period .  */
-	count = 0;
-	while (!(FPGA_INIT_STATE)) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout */
-		if (count++ > 3) {
-			DBG ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_INIT_HIGH;
-		}
-	}
-
-	DBG ("%s, ", (FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE");
-	DBG ("%s\n", (FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT");
-
-	DBG ("write configuration data into fpga\n");
-	/* write configuration-data into fpga... */
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
-	/*
-	 * Load uncompressed image into fpga
-	 */
-	for (i = index; i < size; i++) {
-		b = fpgadata[i];
-		for (j = 0; j < 8; j++) {
-			if ((b & 0x80) == 0x80) {
-				FPGA_WRITE_1;
-			} else {
-				FPGA_WRITE_0;
-			}
-			b <<= 1;
-		}
-	}
-#else
-	/* send 0xff 0x20 */
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_1;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-
-	/*
-	 ** Bit_DeCompression
-	 **   Code 1           .. maxOnes     : n                 '1's followed by '0'
-	 **        maxOnes + 1 .. maxOnes + 1 : n - 1             '1's no '0'
-	 **        maxOnes + 2 .. 254         : n - (maxOnes + 2) '0's followed by '1'
-	 **        255                        :                   '1'
-	 */
-
-	for (i = index; i < size; i++) {
-		b = fpgadata[i];
-		if ((b >= 1) && (b <= MAX_ONES)) {
-			for (bit = 0; bit < b; bit++) {
-				FPGA_WRITE_1;
-			}
-			FPGA_WRITE_0;
-		} else if (b == (MAX_ONES + 1)) {
-			for (bit = 1; bit < b; bit++) {
-				FPGA_WRITE_1;
-			}
-		} else if ((b >= (MAX_ONES + 2)) && (b <= 254)) {
-			for (bit = 0; bit < (b - (MAX_ONES + 2)); bit++) {
-				FPGA_WRITE_0;
-			}
-			FPGA_WRITE_1;
-		} else if (b == 255) {
-			FPGA_WRITE_1;
-		}
-	}
-#endif
-
-	DBG ("%s, ", (FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE");
-	DBG ("%s\n", (FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT");
-
-	/*
-	 * Check if fpga's DONE signal - correctly booted ?
-	 */
-
-	/* Wait for FPGA end of programming period .  */
-	count = 0;
-	while (!(FPGA_DONE_STATE)) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout */
-		if (count++ > 3) {
-			DBG ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_DONE;
-		}
-	}
-
-	DBG ("FPGA: Booting successful!\n");
-	return 0;
-}
diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
deleted file mode 100644
index 29421fc..0000000
--- a/board/esd/common/lcd.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm/io.h>
-#include "lcd.h"
-
-
-extern int video_display_bitmap (ulong, int, int);
-
-
-int palette_index;
-int palette_value;
-int lcd_depth;
-unsigned char *glob_lcd_reg;
-unsigned char *glob_lcd_mem;
-
-#if defined(CONFIG_SYS_LCD_ENDIAN)
-void lcd_setup(int lcd, int config)
-{
-	if (lcd == 0) {
-		/*
-		 * Set endianess and reset lcd controller 0 (small)
-		 */
-
-		/* set reset to low */
-		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD0_RST);
-		udelay(10); /* wait 10us */
-		if (config == 1) {
-			/* big-endian */
-			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
-		} else {
-			/* little-endian */
-			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD_ENDIAN);
-		}
-		udelay(10); /* wait 10us */
-		/* set reset to high */
-		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD0_RST);
-	} else {
-		/*
-		 * Set endianess and reset lcd controller 1 (big)
-		 */
-
-		/* set reset to low */
-		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD1_RST);
-		udelay(10); /* wait 10us */
-		if (config == 1) {
-			/* big-endian */
-			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
-		} else {
-			/* little-endian */
-			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD_ENDIAN);
-		}
-		udelay(10); /* wait 10us */
-		/* set reset to high */
-		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD1_RST);
-	}
-
-	/*
-	 * CONFIG_SYS_LCD_ENDIAN may also be FPGA_RESET, so set inactive
-	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
-}
-#endif /* CONFIG_SYS_LCD_ENDIAN */
-
-
-int lcd_bmp(uchar *logo_bmp)
-{
-	int i;
-	uchar *ptr;
-	ushort *ptr2;
-	ushort val;
-	unsigned char *dst = NULL;
-	int x, y;
-	int width, height, bpp, colors, line_size;
-	int header_size;
-	unsigned char *bmp;
-	unsigned char r, g, b;
-	BITMAPINFOHEADER *bm_info;
-	ulong len;
-
-	/*
-	 * Check for bmp mark 'BM'
-	 */
-	if (*(ushort *)logo_bmp != 0x424d) {
-		/*
-		 * Decompress bmp image
-		 */
-		len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
-		dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE);
-		if (dst == NULL) {
-			printf("Error: malloc for gunzip failed!\n");
-			return 1;
-		}
-		if (gunzip(dst, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE,
-			   (uchar *)logo_bmp, &len) != 0) {
-			free(dst);
-			return 1;
-		}
-		if (len == CONFIG_SYS_VIDEO_LOGO_MAX_SIZE) {
-			printf("Image could be truncated"
-			       " (increase CONFIG_SYS_VIDEO_LOGO_MAX_SIZE)!\n");
-		}
-
-		/*
-		 * Check for bmp mark 'BM'
-		 */
-		if (*(ushort *)dst != 0x424d) {
-			printf("LCD: Unknown image format!\n");
-			free(dst);
-			return 1;
-		}
-	} else {
-		/*
-		 * Uncompressed BMP image, just use this pointer
-		 */
-		dst = (uchar *)logo_bmp;
-	}
-
-	/*
-	 * Get image info from bmp-header
-	 */
-	bm_info = (BITMAPINFOHEADER *)(dst + 14);
-	bpp = LOAD_SHORT(bm_info->biBitCount);
-	width = LOAD_LONG(bm_info->biWidth);
-	height = LOAD_LONG(bm_info->biHeight);
-	switch (bpp) {
-	case 1:
-		colors = 1;
-		line_size = width >> 3;
-		break;
-	case 4:
-		colors = 16;
-		line_size = width >> 1;
-		break;
-	case 8:
-		colors = 256;
-		line_size = width;
-		break;
-	case 24:
-		colors = 0;
-		line_size = width * 3;
-		break;
-	default:
-		printf("LCD: Unknown bpp (%d) im image!\n", bpp);
-		if ((dst != NULL) && (dst != (uchar *)logo_bmp))
-			free(dst);
-		return 1;
-	}
-	printf(" (%d*%d, %dbpp)\n", width, height, bpp);
-
-	/*
-	 * Write color palette
-	 */
-	if ((colors <= 256) && (lcd_depth <= 8)) {
-		ptr = (unsigned char *)(dst + 14 + 40);
-		for (i = 0; i < colors; i++) {
-			b = *ptr++;
-			g = *ptr++;
-			r = *ptr++;
-			ptr++;
-			S1D_WRITE_PALETTE(glob_lcd_reg, i, r, g, b);
-		}
-	}
-
-	/*
-	 * Write bitmap data into framebuffer
-	 */
-	ptr = glob_lcd_mem;
-	ptr2 = (ushort *)glob_lcd_mem;
-	header_size = 14 + 40 + 4*colors;          /* skip bmp header */
-	for (y = 0; y < height; y++) {
-		bmp = &dst[(height-1-y)*line_size + header_size];
-		if (lcd_depth == 16) {
-			if (bpp == 24) {
-				for (x = 0; x < width; x++) {
-					/*
-					 * Generate epson 16bpp fb-format
-					 * from 24bpp image
-					 */
-					b = *bmp++ >> 3;
-					g = *bmp++ >> 2;
-					r = *bmp++ >> 3;
-					val = ((r & 0x1f) << 11) |
-						((g & 0x3f) << 5) |
-						(b & 0x1f);
-					*ptr2++ = val;
-				}
-			} else if (bpp == 8) {
-				for (x = 0; x < line_size; x++) {
-					/* query rgb value from palette */
-					ptr = (unsigned char *)(dst + 14 + 40);
-					ptr += (*bmp++) << 2;
-					b = *ptr++ >> 3;
-					g = *ptr++ >> 2;
-					r = *ptr++ >> 3;
-					val = ((r & 0x1f) << 11) |
-						((g & 0x3f) << 5) |
-						(b & 0x1f);
-					*ptr2++ = val;
-				}
-			}
-		} else {
-			for (x = 0; x < line_size; x++)
-				*ptr++ = *bmp++;
-		}
-	}
-
-	if ((dst != NULL) && (dst != (uchar *)logo_bmp))
-		free(dst);
-	return 0;
-}
-
-
-int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
-	     uchar *logo_bmp, ulong len)
-{
-	int i;
-	ushort s1dReg;
-	uchar s1dValue;
-	int reg_byte_swap;
-
-	/*
-	 * Detect epson
-	 */
-	out_8(&lcd_reg[0], 0x00);
-	out_8(&lcd_reg[1], 0x00);
-
-	if (in_8(&lcd_reg[0]) == 0x1c) {
-		/*
-		 * Big epson detected
-		 */
-		reg_byte_swap = false;
-		palette_index = 0x1e2;
-		palette_value = 0x1e4;
-		lcd_depth = 16;
-		puts("LCD:   S1D13806");
-	} else if (in_8(&lcd_reg[1]) == 0x1c) {
-		/*
-		 * Big epson detected (with register swap bug)
-		 */
-		reg_byte_swap = true;
-		palette_index = 0x1e3;
-		palette_value = 0x1e5;
-		lcd_depth = 16;
-		puts("LCD:   S1D13806S");
-	} else if (in_8(&lcd_reg[0]) == 0x18) {
-		/*
-		 * Small epson detected (704)
-		 */
-		reg_byte_swap = false;
-		palette_index = 0x15;
-		palette_value = 0x17;
-		lcd_depth = 8;
-		puts("LCD:   S1D13704");
-	} else if (in_8(&lcd_reg[0x10000]) == 0x24) {
-		/*
-		 * Small epson detected (705)
-		 */
-		reg_byte_swap = false;
-		palette_index = 0x15;
-		palette_value = 0x17;
-		lcd_depth = 8;
-		lcd_reg += 0x10000; /* add offset for 705 regs */
-		puts("LCD:   S1D13705");
-	} else {
-		out_8(&lcd_reg[0x1a], 0x00);
-		udelay(1000);
-		if (in_8(&lcd_reg[1]) == 0x0c) {
-			/*
-			 * S1D13505 detected
-			 */
-			reg_byte_swap = true;
-			palette_index = 0x25;
-			palette_value = 0x27;
-			lcd_depth = 16;
-
-			puts("LCD:   S1D13505");
-		} else {
-			puts("LCD:   No controller detected!\n");
-			return 1;
-		}
-	}
-
-	/*
-	 * Setup lcd controller regs
-	 */
-	for (i = 0; i < reg_count; i++) {
-		s1dReg = regs[i].Index;
-		if (reg_byte_swap) {
-			if ((s1dReg & 0x0001) == 0)
-				s1dReg |= 0x0001;
-			else
-				s1dReg &= ~0x0001;
-		}
-		s1dValue = regs[i].Value;
-		out_8(&lcd_reg[s1dReg], s1dValue);
-	}
-
-	/*
-	 * Save reg & mem pointer for later usage (e.g. bmp command)
-	 */
-	glob_lcd_reg = lcd_reg;
-	glob_lcd_mem = lcd_mem;
-
-	/*
-	 * Display bmp image
-	 */
-	return lcd_bmp(logo_bmp);
-}
-
-int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	ulong addr;
-#ifdef CONFIG_VIDEO_SM501
-	char *str;
-#endif
-	if (argc != 2)
-		return cmd_usage(cmdtp);
-
-	addr = simple_strtoul(argv[1], NULL, 16);
-
-#ifdef CONFIG_VIDEO_SM501
-	str = getenv("bd_type");
-	if ((strcmp(str, "ppc221") == 0) || (strcmp(str, "ppc231") == 0)) {
-		/*
-		 * SM501 available, use standard bmp command
-		 */
-		return video_display_bitmap(addr, 0, 0);
-	} else {
-		/*
-		 * No SM501 available, use esd epson bmp command
-		 */
-		return lcd_bmp((uchar *)addr);
-	}
-#else
-	return lcd_bmp((uchar *)addr);
-#endif
-}
-
-U_BOOT_CMD(
-	esdbmp,	2,	1,	do_esdbmp,
-	"display BMP image",
-	"<imageAddr> - display image"
-);
diff --git a/board/esd/common/lcd.h b/board/esd/common/lcd.h
deleted file mode 100644
index 5b14bf9..0000000
--- a/board/esd/common/lcd.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Neutralize little endians.
- */
-#define SWAP_LONG(data) ((unsigned long)                                  \
-			 (((unsigned long)(data) >> 24)                 | \
-			  ((unsigned long)(data)  << 24)                | \
-			  (((unsigned long)(data) >> 8) & 0x0000ff00 )  | \
-			   (((unsigned long)(data) << 8) & 0x00ff0000 )))
-#define SWAP_SHORT(data) ((unsigned short)                                \
-			  (((unsigned short)(data) >> 8 )  |              \
-			   ((unsigned short)(data) << 8 )))
-#define LOAD_LONG(data)   SWAP_LONG(data)
-#define LOAD_SHORT(data)  SWAP_SHORT(data)
-
-#define S1D_WRITE_PALETTE(p,i,r,g,b)					\
-	{								\
-		out_8(&((uchar*)(p))[palette_index], (uchar)(i));	\
-		out_8(&((uchar*)(p))[palette_index], (uchar)(r));	\
-		out_8(&((uchar*)(p))[palette_index], (uchar)(g));	\
-		out_8(&((uchar*)(p))[palette_index], (uchar)(b));	\
-	}
-
-typedef struct
-{
-    ushort Index;
-    uchar  Value;
-} S1D_REGS;
-
-typedef struct                       /**** BMP file info structure ****/
-{
-	unsigned int   biSize;           /* Size of info header */
-	int            biWidth;          /* Width of image */
-	int            biHeight;         /* Height of image */
-	unsigned short biPlanes;         /* Number of color planes */
-	unsigned short biBitCount;       /* Number of bits per pixel */
-	unsigned int   biCompression;    /* Type of compression to use */
-	unsigned int   biSizeImage;      /* Size of image data */
-	int            biXPelsPerMeter;  /* X pixels per meter */
-	int            biYPelsPerMeter;  /* Y pixels per meter */
-	unsigned int   biClrUsed;        /* Number of colors used */
-	unsigned int   biClrImportant;   /* Number of important colors */
-} BITMAPINFOHEADER;
diff --git a/board/esd/common/misc.c b/board/esd/common/misc.c
deleted file mode 100644
index 79cd612..0000000
--- a/board/esd/common/misc.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * (C) Copyright 2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-#ifdef CONFIG_LXT971_NO_SLEEP
-#include <miiphy.h>
-#endif
-
-
-#ifdef CONFIG_LXT971_NO_SLEEP
-void lxt971_no_sleep(void)
-{
-	unsigned short reg;
-
-	miiphy_read("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, &reg);
-	reg &= ~0x0040;                  /* disable sleep mode */
-	miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, reg);
-}
-#endif /* CONFIG_LXT971_NO_SLEEP */
diff --git a/board/esd/common/pci.c b/board/esd/common/pci.c
deleted file mode 100644
index faebdb1..0000000
--- a/board/esd/common/pci.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-#include <pci.h>
-
-
-u_long pci9054_iobase;
-
-
-#define PCI_PRIMARY_CAR	(0x500000dc) /* PCI config address reg */
-#define PCI_PRIMARY_CDR	(0x80000000) /* PCI config data    reg */
-
-
-/*-----------------------------------------------------------------------------+
-|  Subroutine:  pci9054_read_config_dword
-|  Description: Read a PCI configuration register
-|  Inputs:
-|               hose            PCI Controller
-|               dev             PCI Bus+Device+Function number
-|               offset          Configuration register number
-|               value           Address of the configuration register value
-|  Return value:
-|               0               Successful
-+-----------------------------------------------------------------------------*/
-int pci9054_read_config_dword(struct pci_controller *hose,
-			      pci_dev_t dev, int offset, u32* value)
-{
-  unsigned long      conAdrVal;
-  unsigned long      val;
-
-  /* generate coded value for CON_ADR register */
-  conAdrVal = dev | (offset & 0xfc) | 0x80000000;
-
-  /* Load the CON_ADR (CAR) value first, then read from CON_DATA (CDR) */
-  *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal;
-
-  /* Note: *pResult comes back as -1 if machine check happened */
-  val = in32r(PCI_PRIMARY_CDR);
-
-  *value = (unsigned long) val;
-
-  out32r(PCI_PRIMARY_CAR, 0);
-
-  if ((*(unsigned long *)0x50000304) & 0x60000000)
-    {
-      /* clear pci master/target abort bits */
-      *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304;
-    }
-
-  return 0;
-}
-
-/*-----------------------------------------------------------------------------+
-|  Subroutine:  pci9054_write_config_dword
-|  Description: Write a PCI configuration register.
-|  Inputs:
-|               hose            PCI Controller
-|               dev             PCI Bus+Device+Function number
-|               offset          Configuration register number
-|               Value           Configuration register value
-|  Return value:
-|               0               Successful
-| Updated for pass2 errata #6. Need to disable interrupts and clear the
-| PCICFGADR reg after writing the PCICFGDATA reg.
-+-----------------------------------------------------------------------------*/
-int pci9054_write_config_dword(struct pci_controller *hose,
-			       pci_dev_t dev, int offset, u32 value)
-{
-  unsigned long      conAdrVal;
-
-  conAdrVal = dev | (offset & 0xfc) | 0x80000000;
-
-  *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal;
-
-  out32r(PCI_PRIMARY_CDR, value);
-
-  out32r(PCI_PRIMARY_CAR, 0);
-
-  /* clear pci master/target abort bits */
-  *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304;
-
-  return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-#ifdef CONFIG_DASA_SIM
-static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t dev,
-					struct pci_config_table *_)
-{
-  unsigned int iobase;
-  unsigned short status = 0;
-  unsigned char timer;
-
-  /*
-   * Configure PLX PCI9054
-   */
-  pci_read_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, &status);
-  status |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-  pci_write_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, status);
-
-  /* Check the latency timer for values >= 0x60.
-   */
-  pci_read_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
-  if (timer < 0x60)
-    {
-      pci_write_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
-    }
-
-  /* Set I/O base register.
-   */
-  pci_write_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CONFIG_SYS_PCI9054_IOBASE);
-  pci_read_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
-
-  pci9054_iobase = pci_mem_to_phys(CONFIG_SYS_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
-
-  if (pci9054_iobase == 0xffffffff)
-    {
-      printf("Error: Can not set I/O base register.\n");
-      return;
-    }
-}
-#endif
-
-static struct pci_config_table pci9054_config_table[] = {
-#ifndef CONFIG_PCI_PNP
-  { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-    PCI_BUS(CONFIG_SYS_ETH_DEV_FN), PCI_DEV(CONFIG_SYS_ETH_DEV_FN), PCI_FUNC(CONFIG_SYS_ETH_DEV_FN),
-    pci_cfgfunc_config_device, { CONFIG_SYS_ETH_IOBASE,
-				 CONFIG_SYS_ETH_IOBASE,
-				 PCI_COMMAND_IO | PCI_COMMAND_MASTER }},
-#ifdef CONFIG_DASA_SIM
-  { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-    PCI_BUS(CONFIG_SYS_PCI9054_DEV_FN), PCI_DEV(CONFIG_SYS_PCI9054_DEV_FN), PCI_FUNC(CONFIG_SYS_PCI9054_DEV_FN),
-    pci_dasa_sim_config_pci9054 },
-#endif
-#endif
-  { }
-};
-
-static struct pci_controller pci9054_hose = {
-  config_table: pci9054_config_table,
-};
-
-void pci_init_board(void)
-{
-  struct pci_controller *hose = &pci9054_hose;
-
-  /*
-   * Register the hose
-   */
-  hose->first_busno = 0;
-  hose->last_busno = 0xff;
-
-  /* System memory space */
-  pci_set_region(hose->regions + 0,
-		 0x00000000, 0x00000000, 0x01000000,
-		 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
-  /* PCI Memory space */
-  pci_set_region(hose->regions + 1,
-		 0x00000000, 0xc0000000, 0x10000000,
-		 PCI_REGION_MEM);
-
-  pci_set_ops(hose,
-	      pci_hose_read_config_byte_via_dword,
-	      pci_hose_read_config_word_via_dword,
-	      pci9054_read_config_dword,
-	      pci_hose_write_config_byte_via_dword,
-	      pci_hose_write_config_word_via_dword,
-	      pci9054_write_config_dword);
-
-  hose->region_count = 2;
-
-  pci_register_hose(hose);
-
-  hose->last_busno = pci_hose_scan(hose);
-}
diff --git a/board/esd/common/s1d13505_640_480_16bpp.h b/board/esd/common/s1d13505_640_480_16bpp.h
deleted file mode 100644
index ca11683..0000000
--- a/board/esd/common/s1d13505_640_480_16bpp.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (C) Copyright 2008
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Panel:  640x480 50Hz TFT Single 18-bit (PCLK=20.000 MHz)
- * Memory:  DRAM (MCLK=40.000 MHz)
- */
-static S1D_REGS regs_13505_640_480_16bpp[] =
-{
-	{0x1B,0x00},   /* Miscellaneous Register */
-	{0x23,0x20},   /* Performance Enhancement Register 1 */
-	{0x01,0x30},   /* Memory Configuration Register */
-	{0x22,0x24},   /* Performance Enhancement Register 0 */
-	{0x02,0x25},   /* Panel Type Register */
-	{0x03,0x00},   /* MOD Rate Register */
-	{0x04,0x4F},   /* Horizontal Display Width Register */
-	{0x05,0x0c},   /* Horizontal Non-Display Period Register */
-	{0x06,0x00},   /* HRTC/FPLINE Start Position Register */
-	{0x07,0x01},   /* HRTC/FPLINE Pulse Width Register */
-	{0x08,0xDF},   /* Vertical Display Height Register 0 */
-	{0x09,0x01},   /* Vertical Display Height Register 1 */
-	{0x0A,0x3E},   /* Vertical Non-Display Period Register */
-	{0x0B,0x00},   /* VRTC/FPFRAME Start Position Register */
-	{0x0C,0x01},   /* VRTC/FPFRAME Pulse Width Register */
-	{0x0E,0xFF},   /* Screen 1 Line Compare Register 0 */
-	{0x0F,0x03},   /* Screen 1 Line Compare Register 1 */
-	{0x10,0x00},   /* Screen 1 Display Start Address Register 0 */
-	{0x11,0x00},   /* Screen 1 Display Start Address Register 1 */
-	{0x12,0x00},   /* Screen 1 Display Start Address Register 2 */
-	{0x13,0x00},   /* Screen 2 Display Start Address Register 0 */
-	{0x14,0x00},   /* Screen 2 Display Start Address Register 1 */
-	{0x15,0x00},   /* Screen 2 Display Start Address Register 2 */
-	{0x16,0x80},   /* Memory Address Offset Register 0 */
-	{0x17,0x02},   /* Memory Address Offset Register 1 */
-	{0x18,0x00},   /* Pixel Panning Register */
-	{0x19,0x01},   /* Clock Configuration Register */
-	{0x1A,0x00},   /* Power Save Configuration Register */
-	{0x1C,0x00},   /* MD Configuration Readback Register 0 */
-	{0x1E,0x06},   /* General IO Pins Configuration Register 0 */
-	{0x1F,0x00},   /* General IO Pins Configuration Register 1 */
-	{0x20,0x00},   /* General IO Pins Control Register 0 */
-	{0x21,0x00},   /* General IO Pins Control Register 1 */
-	{0x23,0x20},   /* Performance Enhancement Register 1 */
-	{0x0D,0x15},   /* Display Mode Register */
-};
diff --git a/board/esd/common/s1d13704_320_240_4bpp.h b/board/esd/common/s1d13704_320_240_4bpp.h
deleted file mode 100644
index bd910e8..0000000
--- a/board/esd/common/s1d13704_320_240_4bpp.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (c) 2000,2001 Epson Research and Development, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Generic Header information generated by 13704CFG.EXE (Build 10)
- * Panel: 320x240x4bpp 78Hz Mono 4-Bit STN, Disabled (PCLK=6.666MHz)
- */
-
-static S1D_REGS regs_13704_320_240_4bpp[] =
-{
-	{ 0x00,             0x00 },       /* Revision Code Register */
-	{ 0x01,             0x04 }, /*00*/      /* Mode Register 0 Register */
-	{ 0x02,             0xA4 }, /*a0*/      /* Mode Register 1 Register */
-	{ 0x03,             0x83 }, /*03*/      /* Mode Register 2 Register - bit7 is LUT bypass */
-	{ 0x04,             0x27 },       /* Horizontal Panel Size Register */
-	{ 0x05,             0xEF },       /* Vertical Panel Size Register (LSB) */
-	{ 0x06,             0x00 },       /* Vertical Panel Size Register (MSB) */
-	{ 0x07,             0x00 },       /* FPLINE Start Position Register */
-	{ 0x08,             0x00 },       /* Horizontal Non-Display Period Register */
-	{ 0x09,             0x00 },       /* FPFRAME Start Position Register */
-	{ 0x0A,             0x02 },       /* Vertical Non-Display Period Register */
-	{ 0x0B,             0x00 },       /* MOD Rate Register */
-	{ 0x0C,             0x00 },       /* Screen 1 Start Address Register (LSB) */
-	{ 0x0D,             0x00 },       /* Screen 1 Start Address Register (MSB) */
-	{ 0x0E,             0x00 },       /* Not Used */
-	{ 0x0F,             0x00 },       /* Screen 2 Start Address Register (LSB) */
-	{ 0x10,             0x00 },       /* Screen 2 Start Address Register (MSB) */
-	{ 0x11,             0x00 },       /* Not Used */
-	{ 0x12,             0x00 },       /* Memory Address Offset Register */
-	{ 0x13,             0xFF },       /* Screen 1 Vertical Size Register (LSB) */
-	{ 0x14,             0x03 },       /* Screen 1 Vertical Size Register (MSB) */
-	{ 0x15,             0x00 },       /* Look-Up Table Address Register */
-	{ 0x16,             0x00 },       /* Look-Up Table Bank Select Register */
-	{ 0x17,             0x00 },       /* Look-Up Table Data Register */
-	{ 0x18,             0x01 },       /* GPIO Configuration Control Register */
-	{ 0x19,             0x01 },       /* GPIO Status/Control Register */
-	{ 0x1A,             0x00 },       /* Scratch Pad Register */
-	{ 0x1B,             0x00 },       /* SwivelView Mode Register */
-	{ 0x1C,             0xA0 },       /* Line Byte Count Register */
-	{ 0x1D,             0x00 },       /* Not Used */
-	{ 0x1E,             0x00 },       /* Not Used */
-	{ 0x1F,             0x00 },       /* Not Used */
-};
diff --git a/board/esd/common/s1d13705_320_240_8bpp.h b/board/esd/common/s1d13705_320_240_8bpp.h
deleted file mode 100644
index 041b4a9..0000000
--- a/board/esd/common/s1d13705_320_240_8bpp.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (c) 2000,2001 Epson Research and Development, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Generic Header information generated by 13704CFG.EXE (Build 10)
- * Panel: 320x240x8bpp 78Hz Mono 8-Bit STN, Disabled (PCLK=6.666MHz)
- */
-
-static S1D_REGS regs_13705_320_240_8bpp[] =
-{
-	{ 0x00,             0x00 },       /* Revision Code Register */
-	{ 0x01,             0x23 },       /* Mode Register 0 Register */
-	{ 0x02,             0xE0 },       /* Mode Register 1 Register */
-	{ 0x03,             0x03 },       /* Mode Register 2 Register - bit7 is LUT bypass */
-	{ 0x04,             0x27 },       /* Horizontal Panel Size Register */
-	{ 0x05,             0xEF },       /* Vertical Panel Size Register (LSB) */
-	{ 0x06,             0x00 },       /* Vertical Panel Size Register (MSB) */
-	{ 0x07,             0x00 },       /* FPLINE Start Position Register */
-	{ 0x08,             0x00 },       /* Horizontal Non-Display Period Register */
-	{ 0x09,             0x01 },       /* FPFRAME Start Position Register */
-	{ 0x0A,             0x02 },       /* Vertical Non-Display Period Register */
-	{ 0x0B,             0x00 },       /* MOD Rate Register */
-	{ 0x0C,             0x00 },       /* Screen 1 Start Address Register (LSB) */
-	{ 0x0D,             0x00 },       /* Screen 1 Start Address Register (MSB) */
-	{ 0x0E,             0x00 },       /* Not Used */
-	{ 0x0F,             0x00 },       /* Screen 2 Start Address Register (LSB) */
-	{ 0x10,             0x00 },       /* Screen 2 Start Address Register (MSB) */
-	{ 0x11,             0x00 },       /* Not Used */
-	{ 0x12,             0x00 },       /* Memory Address Offset Register */
-	{ 0x13,             0xFF },       /* Screen 1 Vertical Size Register (LSB) */
-	{ 0x14,             0x03 },       /* Screen 1 Vertical Size Register (MSB) */
-	{ 0x15,             0x00 },       /* Look-Up Table Address Register */
-	{ 0x16,             0x00 },       /* Look-Up Table Bank Select Register */
-	{ 0x17,             0x00 },       /* Look-Up Table Data Register */
-	{ 0x18,             0x01 },       /* GPIO Configuration Control Register */
-	{ 0x19,             0x01 },       /* GPIO Status/Control Register */
-	{ 0x1A,             0x00 },       /* Scratch Pad Register */
-	{ 0x1B,             0x00 },       /* SwivelView Mode Register */
-	{ 0x1C,             0xFF },       /* Line Byte Count Register */
-	{ 0x1D,             0x00 },       /* Not Used */
-	{ 0x1E,             0x00 },       /* Not Used */
-	{ 0x1F,             0x00 },       /* Not Used */
-};
diff --git a/board/esd/common/s1d13806_1024_768_8bpp.h b/board/esd/common/s1d13806_1024_768_8bpp.h
deleted file mode 100644
index 615fa33..0000000
--- a/board/esd/common/s1d13806_1024_768_8bpp.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (c) 2000,2001 Epson Research and Development, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * File generated by S1D13806CFG.EXE
- * Panel:  (active)   1024x768 34Hz TFT Single 12-bit (PCLK=BUSCLK=33.333MHz)
- * Memory: Embedded SDRAM (MCLK=CLKI=49.100MHz) (BUSCLK=33.333MHz)
- */
-
-static S1D_REGS regs_13806_1024_768_8bpp[] =
-{
-	{0x0001,0x00},   /* Miscellaneous Register */
-	{0x01FC,0x00},   /* Display Mode Register */
-	{0x0004,0x00},   /* General IO Pins Configuration Register 0 */
-	{0x0005,0x00},   /* General IO Pins Configuration Register 1 */
-	{0x0008,0x00},   /* General IO Pins Control Register 0 */
-	{0x0009,0x00},   /* General IO Pins Control Register 1 */
-	{0x0010,0x00},   /* Memory Clock Configuration Register */
-	{0x0014,0x01},   /* LCD Pixel Clock Configuration Register */
-	{0x0018,0x00},   /* CRT/TV Pixel Clock Configuration Register */
-	{0x001C,0x02},   /* MediaPlug Clock Configuration Register */
-	{0x001E,0x01},   /* CPU To Memory Wait State Select Register */
-	{0x0021,0x03},   /* DRAM Refresh Rate Register */
-	{0x002A,0x00},   /* DRAM Timings Control Register 0 */
-	{0x002B,0x01},   /* DRAM Timings Control Register 1 */
-	{0x0020,0x80},   /* Memory Configuration Register */
-	{0x0030,0x55},   /* Panel Type Register */
-	{0x0031,0x00},   /* MOD Rate Register */
-	{0x0032,0x7F},   /* LCD Horizontal Display Width Register */
-	{0x0034,0x12},   /* LCD Horizontal Non-Display Period Register */
-	{0x0035,0x01},   /* TFT FPLINE Start Position Register */
-	{0x0036,0x0B},   /* TFT FPLINE Pulse Width Register */
-	{0x0038,0xFF},   /* LCD Vertical Display Height Register 0 */
-	{0x0039,0x02},   /* LCD Vertical Display Height Register 1 */
-	{0x003A,0x2C},   /* LCD Vertical Non-Display Period Register */
-	{0x003B,0x0A},   /* TFT FPFRAME Start Position Register */
-	{0x003C,0x01},   /* TFT FPFRAME Pulse Width Register */
-	{0x0040,0x03},   /* LCD Display Mode Register */
-	{0x0041,0x00},   /* LCD Miscellaneous Register */
-	{0x0042,0x00},   /* LCD Display Start Address Register 0 */
-	{0x0043,0x00},   /* LCD Display Start Address Register 1 */
-	{0x0044,0x00},   /* LCD Display Start Address Register 2 */
-	{0x0046,0x00},   /* LCD Memory Address Offset Register 0 */
-	{0x0047,0x02},   /* LCD Memory Address Offset Register 1 */
-	{0x0048,0x00},   /* LCD Pixel Panning Register */
-	{0x004A,0x00},   /* LCD Display FIFO High Threshold Control Register */
-	{0x004B,0x00},   /* LCD Display FIFO Low Threshold Control Register */
-	{0x0050,0x4F},   /* CRT/TV Horizontal Display Width Register */
-	{0x0052,0x13},   /* CRT/TV Horizontal Non-Display Period Register */
-	{0x0053,0x01},   /* CRT/TV HRTC Start Position Register */
-	{0x0054,0x0B},   /* CRT/TV HRTC Pulse Width Register */
-	{0x0056,0xDF},   /* CRT/TV Vertical Display Height Register 0 */
-	{0x0057,0x01},   /* CRT/TV Vertical Display Height Register 1 */
-	{0x0058,0x2B},   /* CRT/TV Vertical Non-Display Period Register */
-	{0x0059,0x09},   /* CRT/TV VRTC Start Position Register */
-	{0x005A,0x01},   /* CRT/TV VRTC Pulse Width Register */
-	{0x005B,0x10},   /* TV Output Control Register */
-	{0x0060,0x03},   /* CRT/TV Display Mode Register */
-	{0x0062,0x00},   /* CRT/TV Display Start Address Register 0 */
-	{0x0063,0x00},   /* CRT/TV Display Start Address Register 1 */
-	{0x0064,0x00},   /* CRT/TV Display Start Address Register 2 */
-	{0x0066,0x40},   /* CRT/TV Memory Address Offset Register 0 */
-	{0x0067,0x01},   /* CRT/TV Memory Address Offset Register 1 */
-	{0x0068,0x00},   /* CRT/TV Pixel Panning Register */
-	{0x006A,0x00},   /* CRT/TV Display FIFO High Threshold Control Register */
-	{0x006B,0x00},   /* CRT/TV Display FIFO Low Threshold Control Register */
-	{0x0070,0x00},   /* LCD Ink/Cursor Control Register */
-	{0x0071,0x01},   /* LCD Ink/Cursor Start Address Register */
-	{0x0072,0x00},   /* LCD Cursor X Position Register 0 */
-	{0x0073,0x00},   /* LCD Cursor X Position Register 1 */
-	{0x0074,0x00},   /* LCD Cursor Y Position Register 0 */
-	{0x0075,0x00},   /* LCD Cursor Y Position Register 1 */
-	{0x0076,0x00},   /* LCD Ink/Cursor Blue Color 0 Register */
-	{0x0077,0x00},   /* LCD Ink/Cursor Green Color 0 Register */
-	{0x0078,0x00},   /* LCD Ink/Cursor Red Color 0 Register */
-	{0x007A,0x1F},   /* LCD Ink/Cursor Blue Color 1 Register */
-	{0x007B,0x3F},   /* LCD Ink/Cursor Green Color 1 Register */
-	{0x007C,0x1F},   /* LCD Ink/Cursor Red Color 1 Register */
-	{0x007E,0x00},   /* LCD Ink/Cursor FIFO Threshold Register */
-	{0x0080,0x00},   /* CRT/TV Ink/Cursor Control Register */
-	{0x0081,0x01},   /* CRT/TV Ink/Cursor Start Address Register */
-	{0x0082,0x00},   /* CRT/TV Cursor X Position Register 0 */
-	{0x0083,0x00},   /* CRT/TV Cursor X Position Register 1 */
-	{0x0084,0x00},   /* CRT/TV Cursor Y Position Register 0 */
-	{0x0085,0x00},   /* CRT/TV Cursor Y Position Register 1 */
-	{0x0086,0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register */
-	{0x0087,0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register */
-	{0x0088,0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register */
-	{0x008A,0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register */
-	{0x008B,0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register */
-	{0x008C,0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register */
-	{0x008E,0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register */
-	{0x0100,0x00},   /* BitBlt Control Register 0 */
-	{0x0101,0x00},   /* BitBlt Control Register 1 */
-	{0x0102,0x00},   /* BitBlt ROP Code/Color Expansion Register */
-	{0x0103,0x00},   /* BitBlt Operation Register */
-	{0x0104,0x00},   /* BitBlt Source Start Address Register 0 */
-	{0x0105,0x00},   /* BitBlt Source Start Address Register 1 */
-	{0x0106,0x00},   /* BitBlt Source Start Address Register 2 */
-	{0x0108,0x00},   /* BitBlt Destination Start Address Register 0 */
-	{0x0109,0x00},   /* BitBlt Destination Start Address Register 1 */
-	{0x010A,0x00},   /* BitBlt Destination Start Address Register 2 */
-	{0x010C,0x00},   /* BitBlt Memory Address Offset Register 0 */
-	{0x010D,0x00},   /* BitBlt Memory Address Offset Register 1 */
-	{0x0110,0x00},   /* BitBlt Width Register 0 */
-	{0x0111,0x00},   /* BitBlt Width Register 1 */
-	{0x0112,0x00},   /* BitBlt Height Register 0 */
-	{0x0113,0x00},   /* BitBlt Height Register 1 */
-	{0x0114,0x00},   /* BitBlt Background Color Register 0 */
-	{0x0115,0x00},   /* BitBlt Background Color Register 1 */
-	{0x0118,0x00},   /* BitBlt Foreground Color Register 0 */
-	{0x0119,0x00},   /* BitBlt Foreground Color Register 1 */
-	{0x01E0,0x00},   /* Look-Up Table Mode Register */
-	{0x01E2,0x00},   /* Look-Up Table Address Register */
-	{0x01F0,0x10},   /* Power Save Configuration Register */
-	{0x01F1,0x00},   /* Power Save Status Register */
-	{0x01F4,0x00},   /* CPU-to-Memory Access Watchdog Timer Register */
-	{0x01FC,0x01},   /* Display Mode Register */
-};
diff --git a/board/esd/common/s1d13806_320_240_4bpp.h b/board/esd/common/s1d13806_320_240_4bpp.h
deleted file mode 100644
index 2531f47..0000000
--- a/board/esd/common/s1d13806_320_240_4bpp.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (c) 2000,2001 Epson Research and Development, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * File generated by S1D13806CFG.EXE
- * Panel:  (active)   320x240 62Hz STN Single 4-bit (PCLK=CLKI2/4=6.250MHz)
- * Memory: Embedded SDRAM (MCLK=CLKI=49.500MHz) (BUSCLK=33.333MHz)
- */
-
-static S1D_REGS regs_13806_320_240_4bpp[] =
-{
-	{0x0001,0x00},   /* Miscellaneous Register */
-	{0x01FC,0x00},   /* Display Mode Register */
-	{0x0004,0x08},   /* General IO Pins Configuration Register 0 */
-	{0x0005,0x08},   /* General IO Pins Configuration Register 1 */
-	{0x0008,0x08},   /* General IO Pins Control Register 0 */
-	{0x0009,0x00},   /* General IO Pins Control Register 1 */
-	{0x0010,0x00},   /* Memory Clock Configuration Register */
-	{0x0014,0x32},   /* LCD Pixel Clock Configuration Register */
-	{0x0018,0x00},   /* CRT/TV Pixel Clock Configuration Register */
-	{0x001C,0x02},   /* MediaPlug Clock Configuration Register */
-	{0x001E,0x01},   /* CPU To Memory Wait State Select Register */
-	{0x0021,0x03},   /* DRAM Refresh Rate Register */
-	{0x002A,0x00},   /* DRAM Timings Control Register 0 */
-	{0x002B,0x01},   /* DRAM Timings Control Register 1 */
-	{0x0020,0x80},   /* Memory Configuration Register */
-	{0x0030,0x00},   /* Panel Type Register */
-	{0x0031,0x00},   /* MOD Rate Register */
-	{0x0032,0x27},   /* LCD Horizontal Display Width Register */
-	{0x0034,0x03},   /* LCD Horizontal Non-Display Period Register */
-	{0x0035,0x01},   /* TFT FPLINE Start Position Register */
-	{0x0036,0x0B},   /* TFT FPLINE Pulse Width Register */
-	{0x0038,0xEF},   /* LCD Vertical Display Height Register 0 */
-	{0x0039,0x00},   /* LCD Vertical Display Height Register 1 */
-	{0x003A,0x2C},   /* LCD Vertical Non-Display Period Register */
-	{0x003B,0x0A},   /* TFT FPFRAME Start Position Register */
-	{0x003C,0x01},   /* TFT FPFRAME Pulse Width Register */
-	{0x0040,0x02},   /* LCD Display Mode Register */
-	{0x0041,0x00},   /* LCD Miscellaneous Register */
-	{0x0042,0x00},   /* LCD Display Start Address Register 0 */
-	{0x0043,0x00},   /* LCD Display Start Address Register 1 */
-	{0x0044,0x00},   /* LCD Display Start Address Register 2 */
-	{0x0046,0x50},   /* LCD Memory Address Offset Register 0 */
-	{0x0047,0x00},   /* LCD Memory Address Offset Register 1 */
-	{0x0048,0x00},   /* LCD Pixel Panning Register */
-	{0x004A,0x00},   /* LCD Display FIFO High Threshold Control Register */
-	{0x004B,0x00},   /* LCD Display FIFO Low Threshold Control Register */
-	{0x0050,0x4F},   /* CRT/TV Horizontal Display Width Register */
-	{0x0052,0x13},   /* CRT/TV Horizontal Non-Display Period Register */
-	{0x0053,0x01},   /* CRT/TV HRTC Start Position Register */
-	{0x0054,0x0B},   /* CRT/TV HRTC Pulse Width Register */
-	{0x0056,0xDF},   /* CRT/TV Vertical Display Height Register 0 */
-	{0x0057,0x01},   /* CRT/TV Vertical Display Height Register 1 */
-	{0x0058,0x2B},   /* CRT/TV Vertical Non-Display Period Register */
-	{0x0059,0x09},   /* CRT/TV VRTC Start Position Register */
-	{0x005A,0x01},   /* CRT/TV VRTC Pulse Width Register */
-	{0x005B,0x10},   /* TV Output Control Register */
-	{0x0060,0x03},   /* CRT/TV Display Mode Register */
-	{0x0062,0x00},   /* CRT/TV Display Start Address Register 0 */
-	{0x0063,0x00},   /* CRT/TV Display Start Address Register 1 */
-	{0x0064,0x00},   /* CRT/TV Display Start Address Register 2 */
-	{0x0066,0x40},   /* CRT/TV Memory Address Offset Register 0 */
-	{0x0067,0x01},   /* CRT/TV Memory Address Offset Register 1 */
-	{0x0068,0x00},   /* CRT/TV Pixel Panning Register */
-	{0x006A,0x00},   /* CRT/TV Display FIFO High Threshold Control Register */
-	{0x006B,0x00},   /* CRT/TV Display FIFO Low Threshold Control Register */
-	{0x0070,0x00},   /* LCD Ink/Cursor Control Register */
-	{0x0071,0x01},   /* LCD Ink/Cursor Start Address Register */
-	{0x0072,0x00},   /* LCD Cursor X Position Register 0 */
-	{0x0073,0x00},   /* LCD Cursor X Position Register 1 */
-	{0x0074,0x00},   /* LCD Cursor Y Position Register 0 */
-	{0x0075,0x00},   /* LCD Cursor Y Position Register 1 */
-	{0x0076,0x00},   /* LCD Ink/Cursor Blue Color 0 Register */
-	{0x0077,0x00},   /* LCD Ink/Cursor Green Color 0 Register */
-	{0x0078,0x00},   /* LCD Ink/Cursor Red Color 0 Register */
-	{0x007A,0x1F},   /* LCD Ink/Cursor Blue Color 1 Register */
-	{0x007B,0x3F},   /* LCD Ink/Cursor Green Color 1 Register */
-	{0x007C,0x1F},   /* LCD Ink/Cursor Red Color 1 Register */
-	{0x007E,0x00},   /* LCD Ink/Cursor FIFO Threshold Register */
-	{0x0080,0x00},   /* CRT/TV Ink/Cursor Control Register */
-	{0x0081,0x01},   /* CRT/TV Ink/Cursor Start Address Register */
-	{0x0082,0x00},   /* CRT/TV Cursor X Position Register 0 */
-	{0x0083,0x00},   /* CRT/TV Cursor X Position Register 1 */
-	{0x0084,0x00},   /* CRT/TV Cursor Y Position Register 0 */
-	{0x0085,0x00},   /* CRT/TV Cursor Y Position Register 1 */
-	{0x0086,0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register */
-	{0x0087,0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register */
-	{0x0088,0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register */
-	{0x008A,0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register */
-	{0x008B,0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register */
-	{0x008C,0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register */
-	{0x008E,0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register */
-	{0x0100,0x00},   /* BitBlt Control Register 0 */
-	{0x0101,0x00},   /* BitBlt Control Register 1 */
-	{0x0102,0x00},   /* BitBlt ROP Code/Color Expansion Register */
-	{0x0103,0x00},   /* BitBlt Operation Register */
-	{0x0104,0x00},   /* BitBlt Source Start Address Register 0 */
-	{0x0105,0x00},   /* BitBlt Source Start Address Register 1 */
-	{0x0106,0x00},   /* BitBlt Source Start Address Register 2 */
-	{0x0108,0x00},   /* BitBlt Destination Start Address Register 0 */
-	{0x0109,0x00},   /* BitBlt Destination Start Address Register 1 */
-	{0x010A,0x00},   /* BitBlt Destination Start Address Register 2 */
-	{0x010C,0x00},   /* BitBlt Memory Address Offset Register 0 */
-	{0x010D,0x00},   /* BitBlt Memory Address Offset Register 1 */
-	{0x0110,0x00},   /* BitBlt Width Register 0 */
-	{0x0111,0x00},   /* BitBlt Width Register 1 */
-	{0x0112,0x00},   /* BitBlt Height Register 0 */
-	{0x0113,0x00},   /* BitBlt Height Register 1 */
-	{0x0114,0x00},   /* BitBlt Background Color Register 0 */
-	{0x0115,0x00},   /* BitBlt Background Color Register 1 */
-	{0x0118,0x00},   /* BitBlt Foreground Color Register 0 */
-	{0x0119,0x00},   /* BitBlt Foreground Color Register 1 */
-	{0x01E0,0x00},   /* Look-Up Table Mode Register */
-	{0x01E2,0x00},   /* Look-Up Table Address Register */
-	{0x01F0,0x10},   /* Power Save Configuration Register */
-	{0x01F1,0x00},   /* Power Save Status Register */
-	{0x01F4,0x00},   /* CPU-to-Memory Access Watchdog Timer Register */
-	{0x01FC,0x01},   /* Display Mode Register */
-};
diff --git a/board/esd/common/s1d13806_640_480_16bpp.h b/board/esd/common/s1d13806_640_480_16bpp.h
deleted file mode 100644
index 38fc1a7..0000000
--- a/board/esd/common/s1d13806_640_480_16bpp.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (c) 2000,2001 Epson Research and Development, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * File generated by S1D13806CFG.EXE
- * Panel:  (active)   640x480 59Hz TFT Single 18-bit (PCLK=CLKI2=25.000MHz)
- * Memory: Embedded SDRAM (MCLK=CLKI=49.152MHz) (BUSCLK=33.333MHz)
- */
-
-static S1D_REGS regs_13806_640_480_16bpp[] =
-{
-	{0x0001,0x00},   /* Miscellaneous Register */
-	{0x01FC,0x00},   /* Display Mode Register */
-	{0x0004,0x18},   /* General IO Pins Configuration Register 0 */
-	{0x0005,0x00},   /* General IO Pins Configuration Register 1 */
-	{0x0008,0x18},   /* General IO Pins Control Register 0 */
-	{0x0009,0x00},   /* General IO Pins Control Register 1 */
-	{0x0010,0x00},   /* Memory Clock Configuration Register */
-	{0x0014,0x02},   /* LCD Pixel Clock Configuration Register */
-	{0x0018,0x02},   /* CRT/TV Pixel Clock Configuration Register */
-	{0x001C,0x02},   /* MediaPlug Clock Configuration Register */
-	{0x001E,0x01},   /* CPU To Memory Wait State Select Register */
-	{0x0021,0x03},   /* DRAM Refresh Rate Register */
-	{0x002A,0x00},   /* DRAM Timings Control Register 0 */
-	{0x002B,0x01},   /* DRAM Timings Control Register 1 */
-	{0x0020,0x80},   /* Memory Configuration Register */
-	{0x0030,0x25},   /* Panel Type Register */
-	{0x0031,0x00},   /* MOD Rate Register */
-	{0x0032,0x4F},   /* LCD Horizontal Display Width Register */
-	{0x0034,0x13},   /* LCD Horizontal Non-Display Period Register */
-	{0x0035,0x00},   /* TFT FPLINE Start Position Register */
-	{0x0036,0x0B},   /* TFT FPLINE Pulse Width Register */
-	{0x0038,0xDF},   /* LCD Vertical Display Height Register 0 */
-	{0x0039,0x01},   /* LCD Vertical Display Height Register 1 */
-	{0x003A,0x24},   /* LCD Vertical Non-Display Period Register */
-	{0x003B,0x00},   /* TFT FPFRAME Start Position Register */
-	{0x003C,0x01},   /* TFT FPFRAME Pulse Width Register */
-	{0x0040,0x05},   /* LCD Display Mode Register */
-	{0x0041,0x00},   /* LCD Miscellaneous Register */
-	{0x0042,0x00},   /* LCD Display Start Address Register 0 */
-	{0x0043,0x00},   /* LCD Display Start Address Register 1 */
-	{0x0044,0x00},   /* LCD Display Start Address Register 2 */
-	{0x0046,0x80},   /* LCD Memory Address Offset Register 0 */
-	{0x0047,0x02},   /* LCD Memory Address Offset Register 1 */
-	{0x0048,0x00},   /* LCD Pixel Panning Register */
-	{0x004A,0x00},   /* LCD Display FIFO High Threshold Control Register */
-	{0x004B,0x00},   /* LCD Display FIFO Low Threshold Control Register */
-	{0x0050,0x4F},   /* CRT/TV Horizontal Display Width Register */
-	{0x0052,0x13},   /* CRT/TV Horizontal Non-Display Period Register */
-	{0x0053,0x01},   /* CRT/TV HRTC Start Position Register */
-	{0x0054,0x0B},   /* CRT/TV HRTC Pulse Width Register */
-	{0x0056,0xDF},   /* CRT/TV Vertical Display Height Register 0 */
-	{0x0057,0x01},   /* CRT/TV Vertical Display Height Register 1 */
-	{0x0058,0x2B},   /* CRT/TV Vertical Non-Display Period Register */
-	{0x0059,0x09},   /* CRT/TV VRTC Start Position Register */
-	{0x005A,0x01},   /* CRT/TV VRTC Pulse Width Register */
-	{0x005B,0x10},   /* TV Output Control Register */
-	{0x0060,0x05},   /* CRT/TV Display Mode Register */
-	{0x0062,0x00},   /* CRT/TV Display Start Address Register 0 */
-	{0x0063,0x00},   /* CRT/TV Display Start Address Register 1 */
-	{0x0064,0x00},   /* CRT/TV Display Start Address Register 2 */
-	{0x0066,0x80},   /* CRT/TV Memory Address Offset Register 0 */
-	{0x0067,0x02},   /* CRT/TV Memory Address Offset Register 1 */
-	{0x0068,0x00},   /* CRT/TV Pixel Panning Register */
-	{0x006A,0x00},   /* CRT/TV Display FIFO High Threshold Control Register */
-	{0x006B,0x00},   /* CRT/TV Display FIFO Low Threshold Control Register */
-	{0x0070,0x00},   /* LCD Ink/Cursor Control Register */
-	{0x0071,0x01},   /* LCD Ink/Cursor Start Address Register */
-	{0x0072,0x00},   /* LCD Cursor X Position Register 0 */
-	{0x0073,0x00},   /* LCD Cursor X Position Register 1 */
-	{0x0074,0x00},   /* LCD Cursor Y Position Register 0 */
-	{0x0075,0x00},   /* LCD Cursor Y Position Register 1 */
-	{0x0076,0x00},   /* LCD Ink/Cursor Blue Color 0 Register */
-	{0x0077,0x00},   /* LCD Ink/Cursor Green Color 0 Register */
-	{0x0078,0x00},   /* LCD Ink/Cursor Red Color 0 Register */
-	{0x007A,0x1F},   /* LCD Ink/Cursor Blue Color 1 Register */
-	{0x007B,0x3F},   /* LCD Ink/Cursor Green Color 1 Register */
-	{0x007C,0x1F},   /* LCD Ink/Cursor Red Color 1 Register */
-	{0x007E,0x00},   /* LCD Ink/Cursor FIFO Threshold Register */
-	{0x0080,0x00},   /* CRT/TV Ink/Cursor Control Register */
-	{0x0081,0x01},   /* CRT/TV Ink/Cursor Start Address Register */
-	{0x0082,0x00},   /* CRT/TV Cursor X Position Register 0 */
-	{0x0083,0x00},   /* CRT/TV Cursor X Position Register 1 */
-	{0x0084,0x00},   /* CRT/TV Cursor Y Position Register 0 */
-	{0x0085,0x00},   /* CRT/TV Cursor Y Position Register 1 */
-	{0x0086,0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register */
-	{0x0087,0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register */
-	{0x0088,0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register */
-	{0x008A,0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register */
-	{0x008B,0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register */
-	{0x008C,0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register */
-	{0x008E,0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register */
-	{0x0100,0x00},   /* BitBlt Control Register 0 */
-	{0x0101,0x00},   /* BitBlt Control Register 1 */
-	{0x0102,0x00},   /* BitBlt ROP Code/Color Expansion Register */
-	{0x0103,0x00},   /* BitBlt Operation Register */
-	{0x0104,0x00},   /* BitBlt Source Start Address Register 0 */
-	{0x0105,0x00},   /* BitBlt Source Start Address Register 1 */
-	{0x0106,0x00},   /* BitBlt Source Start Address Register 2 */
-	{0x0108,0x00},   /* BitBlt Destination Start Address Register 0 */
-	{0x0109,0x00},   /* BitBlt Destination Start Address Register 1 */
-	{0x010A,0x00},   /* BitBlt Destination Start Address Register 2 */
-	{0x010C,0x00},   /* BitBlt Memory Address Offset Register 0 */
-	{0x010D,0x00},   /* BitBlt Memory Address Offset Register 1 */
-	{0x0110,0x00},   /* BitBlt Width Register 0 */
-	{0x0111,0x00},   /* BitBlt Width Register 1 */
-	{0x0112,0x00},   /* BitBlt Height Register 0 */
-	{0x0113,0x00},   /* BitBlt Height Register 1 */
-	{0x0114,0x00},   /* BitBlt Background Color Register 0 */
-	{0x0115,0x00},   /* BitBlt Background Color Register 1 */
-	{0x0118,0x00},   /* BitBlt Foreground Color Register 0 */
-	{0x0119,0x00},   /* BitBlt Foreground Color Register 1 */
-	{0x01E0,0x00},   /* Look-Up Table Mode Register */
-	{0x01E2,0x00},   /* Look-Up Table Address Register */
-	{0x01F0,0x10},   /* Power Save Configuration Register */
-	{0x01F1,0x00},   /* Power Save Status Register */
-	{0x01F4,0x00},   /* CPU-to-Memory Access Watchdog Timer Register */
-	{0x01FC,0x01},   /* Display Mode Register */
-};
diff --git a/board/esd/common/xilinx_jtag/lenval.c b/board/esd/common/xilinx_jtag/lenval.c
deleted file mode 100644
index 5405efb..0000000
--- a/board/esd/common/xilinx_jtag/lenval.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * (C) Copyright 2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*******************************************************/
-/* file: lenval.c                                      */
-/* abstract:  This file contains routines for using    */
-/*            the lenVal data structure.               */
-/*******************************************************/
-
-#include <common.h>
-#include <asm/processor.h>
-
-#include "lenval.h"
-#include "ports.h"
-
-
-/*****************************************************************************
- * Function:     value
- * Description:  Extract the long value from the lenval array.
- * Parameters:   plvValue    - ptr to lenval.
- * Returns:      long        - the extracted value.
- *****************************************************************************/
-long value( lenVal*     plvValue )
-{
-	long    lValue;         /* result to hold the accumulated result */
-	short   sIndex;
-
-	lValue  = 0;
-	for ( sIndex = 0; sIndex < plvValue->len ; ++sIndex )
-	{
-		lValue <<= 8;                       /* shift the accumulated result */
-		lValue |= plvValue->val[ sIndex];   /* get the last byte first */
-	}
-
-	return( lValue );
-}
-
-/*****************************************************************************
- * Function:     initLenVal
- * Description:  Initialize the lenval array with the given value.
- *               Assumes lValue is less than 256.
- * Parameters:   plv         - ptr to lenval.
- *               lValue      - the value to set.
- * Returns:      void.
- *****************************************************************************/
-void initLenVal( lenVal*    plv,
-		 long       lValue )
-{
-	plv->len    = 1;
-	plv->val[0] = (unsigned char)lValue;
-}
-
-/*****************************************************************************
- * Function:     EqualLenVal
- * Description:  Compare two lenval arrays with an optional mask.
- * Parameters:   plvTdoExpected  - ptr to lenval #1.
- *               plvTdoCaptured  - ptr to lenval #2.
- *               plvTdoMask      - optional ptr to mask (=0 if no mask).
- * Returns:      short   - 0 = mismatch; 1 = equal.
- *****************************************************************************/
-short EqualLenVal( lenVal*  plvTdoExpected,
-		   lenVal*  plvTdoCaptured,
-		   lenVal*  plvTdoMask )
-{
-	short           sEqual;
-	short           sIndex;
-	unsigned char   ucByteVal1;
-	unsigned char   ucByteVal2;
-	unsigned char   ucByteMask;
-
-	sEqual  = 1;
-	sIndex  = plvTdoExpected->len;
-
-	while ( sEqual && sIndex-- )
-	{
-		ucByteVal1  = plvTdoExpected->val[ sIndex ];
-		ucByteVal2  = plvTdoCaptured->val[ sIndex ];
-		if ( plvTdoMask )
-		{
-			ucByteMask  = plvTdoMask->val[ sIndex ];
-			ucByteVal1  &= ucByteMask;
-			ucByteVal2  &= ucByteMask;
-		}
-		if ( ucByteVal1 != ucByteVal2 )
-		{
-			sEqual  = 0;
-		}
-	}
-
-	return( sEqual );
-}
-
-
-/*****************************************************************************
- * Function:     RetBit
- * Description:  return the (byte, bit) of lv (reading from left to right).
- * Parameters:   plv     - ptr to lenval.
- *               iByte   - the byte to get the bit from.
- *               iBit    - the bit number (0=msb)
- * Returns:      short   - the bit value.
- *****************************************************************************/
-short RetBit( lenVal*   plv,
-	      int       iByte,
-	      int       iBit )
-{
-	/* assert( ( iByte >= 0 ) && ( iByte < plv->len ) ); */
-	/* assert( ( iBit >= 0 ) && ( iBit < 8 ) ); */
-	return( (short)( ( plv->val[ iByte ] >> ( 7 - iBit ) ) & 0x1 ) );
-}
-
-/*****************************************************************************
- * Function:     SetBit
- * Description:  set the (byte, bit) of lv equal to val
- * Example:      SetBit("00000000",byte, 1) equals "01000000".
- * Parameters:   plv     - ptr to lenval.
- *               iByte   - the byte to get the bit from.
- *               iBit    - the bit number (0=msb).
- *               sVal    - the bit value to set.
- * Returns:      void.
- *****************************************************************************/
-void SetBit( lenVal*    plv,
-	     int        iByte,
-	     int        iBit,
-	     short      sVal )
-{
-	unsigned char   ucByteVal;
-	unsigned char   ucBitMask;
-
-	ucBitMask   = (unsigned char)(1 << ( 7 - iBit ));
-	ucByteVal   = (unsigned char)(plv->val[ iByte ] & (~ucBitMask));
-
-	if ( sVal )
-	{
-		ucByteVal   |= ucBitMask;
-	}
-	plv->val[ iByte ]   = ucByteVal;
-}
-
-/*****************************************************************************
- * Function:     AddVal
- * Description:  add val1 to val2 and store in resVal;
- *               assumes val1 and val2  are of equal length.
- * Parameters:   plvResVal   - ptr to result.
- *               plvVal1     - ptr of addendum.
- *               plvVal2     - ptr of addendum.
- * Returns:      void.
- *****************************************************************************/
-void addVal( lenVal*    plvResVal,
-	     lenVal*    plvVal1,
-	     lenVal*    plvVal2 )
-{
-	unsigned char   ucCarry;
-	unsigned short  usSum;
-	unsigned short  usVal1;
-	unsigned short  usVal2;
-	short           sIndex;
-
-	plvResVal->len  = plvVal1->len;         /* set up length of result */
-
-	/* start at least significant bit and add bytes    */
-	ucCarry = 0;
-	sIndex  = plvVal1->len;
-	while ( sIndex-- )
-	{
-		usVal1  = plvVal1->val[ sIndex ];   /* i'th byte of val1 */
-		usVal2  = plvVal2->val[ sIndex ];   /* i'th byte of val2 */
-
-		/* add the two bytes plus carry from previous addition */
-		usSum   = (unsigned short)( usVal1 + usVal2 + ucCarry );
-
-		/* set up carry for next byte */
-		ucCarry = (unsigned char)( ( usSum > 255 ) ? 1 : 0 );
-
-		/* set the i'th byte of the result */
-		plvResVal->val[ sIndex ]    = (unsigned char)usSum;
-	}
-}
-
-/*****************************************************************************
- * Function:     readVal
- * Description:  read from XSVF numBytes bytes of data into x.
- * Parameters:   plv         - ptr to lenval in which to put the bytes read.
- *               sNumBytes   - the number of bytes to read.
- * Returns:      void.
- *****************************************************************************/
-void readVal( lenVal*   plv,
-	      short     sNumBytes )
-{
-	unsigned char*  pucVal;
-
-	plv->len    = sNumBytes;        /* set the length of the lenVal        */
-	for ( pucVal = plv->val; sNumBytes; --sNumBytes, ++pucVal )
-	{
-		/* read a byte of data into the lenVal */
-		readByte( pucVal );
-	}
-}
diff --git a/board/esd/common/xilinx_jtag/lenval.h b/board/esd/common/xilinx_jtag/lenval.h
deleted file mode 100644
index 3273eec..0000000
--- a/board/esd/common/xilinx_jtag/lenval.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*******************************************************/
-/* file: lenval.h                                      */
-/* abstract:  This file contains a description of the  */
-/*            data structure "lenval".                 */
-/*******************************************************/
-
-#ifndef lenval_dot_h
-#define lenval_dot_h
-
-/* the lenVal structure is a byte oriented type used to store an */
-/* arbitrary length binary value. As an example, the hex value   */
-/* 0x0e3d is represented as a lenVal with len=2 (since 2 bytes   */
-/* and val[0]=0e and val[1]=3d.  val[2-MAX_LEN] are undefined    */
-
-/* maximum length (in bytes) of value to read in        */
-/* this needs to be at least 4, and longer than the     */
-/* length of the longest SDR instruction.  If there is, */
-/* only 1 device in the chain, MAX_LEN must be at least */
-/* ceil(27/8) == 4.  For 6 devices in a chain, MAX_LEN  */
-/* must be 5, for 14 devices MAX_LEN must be 6, for 20  */
-/* devices MAX_LEN must be 7, etc..                     */
-/* You can safely set MAX_LEN to a smaller number if you*/
-/* know how many devices will be in your chain.         */
-#define MAX_LEN 7000
-
-
-typedef struct var_len_byte
-{
-	short len;   /* number of chars in this value */
-	unsigned char val[MAX_LEN+1];  /* bytes of data */
-} lenVal;
-
-
-/* return the long representation of a lenVal */
-extern long value(lenVal *x);
-
-/* set lenVal equal to value */
-extern void initLenVal(lenVal *x, long value);
-
-/* check if expected equals actual (taking the mask into account) */
-extern short EqualLenVal(lenVal *expected, lenVal *actual, lenVal *mask);
-
-/* add val1+val2 and put the result in resVal */
-extern void addVal(lenVal *resVal, lenVal *val1, lenVal *val2);
-
-/* return the (byte, bit) of lv (reading from left to right) */
-extern short RetBit(lenVal *lv, int byte, int bit);
-
-/* set the (byte, bit) of lv equal to val (e.g. SetBit("00000000",byte, 1)
-   equals "01000000" */
-extern void SetBit(lenVal *lv, int byte, int bit, short val);
-
-/* read from XSVF numBytes bytes of data into x */
-extern void  readVal(lenVal *x, short numBytes);
-
-#endif
diff --git a/board/esd/common/xilinx_jtag/micro.c b/board/esd/common/xilinx_jtag/micro.c
deleted file mode 100644
index 556636c..0000000
--- a/board/esd/common/xilinx_jtag/micro.c
+++ /dev/null
@@ -1,1854 +0,0 @@
-/*
- * (C) Copyright 2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*****************************************************************************
- * file:         micro.c
- * abstract:     This file contains the function, xsvfExecute(),
- *               call for interpreting the XSVF commands.
- * Usage:        Call xsvfExecute() to process XSVF data.
- *               The XSVF data is retrieved by readByte() in ports.c
- *               Remove the main function if you already have one.
- * Options:      XSVF_SUPPORT_COMPRESSION
- *                   This define supports the XC9500/XL compression scheme.
- *                   This define adds support for XSDRINC and XSETSDRMASKS.
- *               XSVF_SUPPORT_ERRORCODES
- *                   This define causes the xsvfExecute function to return
- *                   an error code for specific errors.  See error codes below.
- *                   If this is not defined, the return value defaults to the
- *                   legacy values for backward compatibility:
- *                   1 = success;  0 = failure.
- * Debugging:    DEBUG_MODE (Legacy name)
- *               Define DEBUG_MODE to compile with debugging features.
- *               Both micro.c and ports.c must be compiled with the DEBUG_MODE
- *               defined to enable the standalone main implementation in
- *               micro.c that reads XSVF from a file.
- * History:      v2.00   - Original XSVF implementation.
- *               v4.04   - Added delay at end of XSIR for XC18v00 support.
- *                         Added new commands for CoolRunner support:
- *                         XSTATE, XENDIR, XENDDR
- *               v4.05   - Cleanup micro.c but leave ports.c intact.
- *               v4.06   - Fix xsvfGotoTapState for retry transition.
- *               v4.07   - Update example waitTime implementations for
- *                         compatibility with Virtex-II.
- *               v4.10   - Add new XSIR2 command that supports a 2-byte
- *                         IR-length parameter for IR shifts > 255 bits.
- *               v4.11   - No change.  Update version to match SVF2XSVF xlator.
- *               v4.14   - Added XCOMMENT.
- *               v5.00   - Improve XSTATE support.
- *                         Added XWAIT.
- *****************************************************************************/
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-
-#include "micro.h"
-#include "lenval.h"
-#include "ports.h"
-
-const unsigned char *xsvfdata;
-
-/*============================================================================
- * XSVF #define
- ============================================================================*/
-
-#define XSVF_VERSION    "5.00"
-
-/*****************************************************************************
- * Define:       XSVF_SUPPORT_COMPRESSION
- * Description:  Define this to support the XC9500/XL XSVF data compression
- *               scheme.
- *               Code size can be reduced by NOT supporting this feature.
- *               However, you must use the -nc (no compress) option when
- *               translating SVF to XSVF using the SVF2XSVF translator.
- *               Corresponding, uncompressed XSVF may be larger.
- *****************************************************************************/
-#ifndef XSVF_SUPPORT_COMPRESSION
-#define XSVF_SUPPORT_COMPRESSION    1
-#endif
-
-/*****************************************************************************
- * Define:       XSVF_SUPPORT_ERRORCODES
- * Description:  Define this to support the new XSVF error codes.
- *               (The original XSVF player just returned 1 for success and
- *               0 for an unspecified failure.)
- *****************************************************************************/
-#ifndef XSVF_SUPPORT_ERRORCODES
-#define XSVF_SUPPORT_ERRORCODES     1
-#endif
-
-#ifdef  XSVF_SUPPORT_ERRORCODES
-#define XSVF_ERRORCODE(errorCode)   errorCode
-#else   /* Use legacy error code */
-#define XSVF_ERRORCODE(errorCode)   ((errorCode==XSVF_ERROR_NONE)?1:0)
-#endif  /* XSVF_SUPPORT_ERRORCODES */
-
-
-/*============================================================================
- * DEBUG_MODE #define
- ============================================================================*/
-#define DEBUG_MODE
-
-#ifdef  DEBUG_MODE
-#define XSVFDBG_PRINTF(iDebugLevel,pzFormat) \
-		{ if ( xsvf_iDebugLevel >= iDebugLevel ) \
-		    printf( pzFormat ); }
-#define XSVFDBG_PRINTF1(iDebugLevel,pzFormat,arg1) \
-		{ if ( xsvf_iDebugLevel >= iDebugLevel ) \
-		    printf( pzFormat, arg1 ); }
-#define XSVFDBG_PRINTF2(iDebugLevel,pzFormat,arg1,arg2) \
-		{ if ( xsvf_iDebugLevel >= iDebugLevel ) \
-		    printf( pzFormat, arg1, arg2 ); }
-#define XSVFDBG_PRINTF3(iDebugLevel,pzFormat,arg1,arg2,arg3) \
-		{ if ( xsvf_iDebugLevel >= iDebugLevel ) \
-		    printf( pzFormat, arg1, arg2, arg3 ); }
-#define XSVFDBG_PRINTLENVAL(iDebugLevel,plenVal) \
-		{ if ( xsvf_iDebugLevel >= iDebugLevel ) \
-		    xsvfPrintLenVal(plenVal); }
-#else   /* !DEBUG_MODE */
-#define XSVFDBG_PRINTF(iDebugLevel,pzFormat)
-#define XSVFDBG_PRINTF1(iDebugLevel,pzFormat,arg1)
-#define XSVFDBG_PRINTF2(iDebugLevel,pzFormat,arg1,arg2)
-#define XSVFDBG_PRINTF3(iDebugLevel,pzFormat,arg1,arg2,arg3)
-#define XSVFDBG_PRINTLENVAL(iDebugLevel,plenVal)
-#endif  /* DEBUG_MODE */
-
-
-/*============================================================================
- * XSVF Type Declarations
- ============================================================================*/
-
-/*****************************************************************************
- * Struct:       SXsvfInfo
- * Description:  This structure contains all of the data used during the
- *               execution of the XSVF.  Some data is persistent, predefined
- *               information (e.g. lRunTestTime).  The bulk of this struct's
- *               size is due to the lenVal structs (defined in lenval.h)
- *               which contain buffers for the active shift data.  The MAX_LEN
- *               #define in lenval.h defines the size of these buffers.
- *               These buffers must be large enough to store the longest
- *               shift data in your XSVF file.  For example:
- *                   MAX_LEN >= ( longest_shift_data_in_bits / 8 )
- *               Because the lenVal struct dominates the space usage of this
- *               struct, the rough size of this struct is:
- *                   sizeof( SXsvfInfo ) ~= MAX_LEN * 7 (number of lenVals)
- *               xsvfInitialize() contains initialization code for the data
- *               in this struct.
- *               xsvfCleanup() contains cleanup code for the data in this
- *               struct.
- *****************************************************************************/
-typedef struct tagSXsvfInfo
-{
-	/* XSVF status information */
-	unsigned char   ucComplete;         /* 0 = running; 1 = complete */
-	unsigned char   ucCommand;          /* Current XSVF command byte */
-	long            lCommandCount;      /* Number of commands processed */
-	int             iErrorCode;         /* An error code. 0 = no error. */
-
-	/* TAP state/sequencing information */
-	unsigned char   ucTapState;         /* Current TAP state */
-	unsigned char   ucEndIR;            /* ENDIR TAP state (See SVF) */
-	unsigned char   ucEndDR;            /* ENDDR TAP state (See SVF) */
-
-	/* RUNTEST information */
-	unsigned char   ucMaxRepeat;        /* Max repeat loops (for xc9500/xl) */
-	long            lRunTestTime;       /* Pre-specified RUNTEST time (usec) */
-
-	/* Shift Data Info and Buffers */
-	long            lShiftLengthBits;   /* Len. current shift data in bits */
-	short           sShiftLengthBytes;  /* Len. current shift data in bytes */
-
-	lenVal          lvTdi;              /* Current TDI shift data */
-	lenVal          lvTdoExpected;      /* Expected TDO shift data */
-	lenVal          lvTdoCaptured;      /* Captured TDO shift data */
-	lenVal          lvTdoMask;          /* TDO mask: 0=dontcare; 1=compare */
-
-#ifdef  XSVF_SUPPORT_COMPRESSION
-	/* XSDRINC Data Buffers */
-	lenVal          lvAddressMask;      /* Address mask for XSDRINC */
-	lenVal          lvDataMask;         /* Data mask for XSDRINC */
-	lenVal          lvNextData;         /* Next data for XSDRINC */
-#endif  /* XSVF_SUPPORT_COMPRESSION */
-} SXsvfInfo;
-
-/* Declare pointer to functions that perform XSVF commands */
-typedef int (*TXsvfDoCmdFuncPtr)( SXsvfInfo* );
-
-/*============================================================================
- * XSVF Command Bytes
- ============================================================================*/
-
-/* encodings of xsvf instructions */
-#define XCOMPLETE        0
-#define XTDOMASK         1
-#define XSIR             2
-#define XSDR             3
-#define XRUNTEST         4
-/* Reserved              5 */
-/* Reserved              6 */
-#define XREPEAT          7
-#define XSDRSIZE         8
-#define XSDRTDO          9
-#define XSETSDRMASKS     10
-#define XSDRINC          11
-#define XSDRB            12
-#define XSDRC            13
-#define XSDRE            14
-#define XSDRTDOB         15
-#define XSDRTDOC         16
-#define XSDRTDOE         17
-#define XSTATE           18         /* 4.00 */
-#define XENDIR           19         /* 4.04 */
-#define XENDDR           20         /* 4.04 */
-#define XSIR2            21         /* 4.10 */
-#define XCOMMENT         22         /* 4.14 */
-#define XWAIT            23         /* 5.00 */
-/* Insert new commands here */
-/* and add corresponding xsvfDoCmd function to xsvf_pfDoCmd below. */
-#define XLASTCMD         24         /* Last command marker */
-
-
-/*============================================================================
- * XSVF Command Parameter Values
- ============================================================================*/
-
-#define XSTATE_RESET     0          /* 4.00 parameter for XSTATE */
-#define XSTATE_RUNTEST   1          /* 4.00 parameter for XSTATE */
-
-#define XENDXR_RUNTEST   0          /* 4.04 parameter for XENDIR/DR */
-#define XENDXR_PAUSE     1          /* 4.04 parameter for XENDIR/DR */
-
-/* TAP states */
-#define XTAPSTATE_RESET     0x00
-#define XTAPSTATE_RUNTEST   0x01    /* a.k.a. IDLE */
-#define XTAPSTATE_SELECTDR  0x02
-#define XTAPSTATE_CAPTUREDR 0x03
-#define XTAPSTATE_SHIFTDR   0x04
-#define XTAPSTATE_EXIT1DR   0x05
-#define XTAPSTATE_PAUSEDR   0x06
-#define XTAPSTATE_EXIT2DR   0x07
-#define XTAPSTATE_UPDATEDR  0x08
-#define XTAPSTATE_IRSTATES  0x09    /* All IR states begin here */
-#define XTAPSTATE_SELECTIR  0x09
-#define XTAPSTATE_CAPTUREIR 0x0A
-#define XTAPSTATE_SHIFTIR   0x0B
-#define XTAPSTATE_EXIT1IR   0x0C
-#define XTAPSTATE_PAUSEIR   0x0D
-#define XTAPSTATE_EXIT2IR   0x0E
-#define XTAPSTATE_UPDATEIR  0x0F
-
-/*============================================================================
- * XSVF Function Prototypes
- ============================================================================*/
-
-int xsvfDoIllegalCmd( SXsvfInfo* pXsvfInfo );   /* Illegal command function */
-int xsvfDoXCOMPLETE( SXsvfInfo* pXsvfInfo );
-int xsvfDoXTDOMASK( SXsvfInfo* pXsvfInfo );
-int xsvfDoXSIR( SXsvfInfo* pXsvfInfo );
-int xsvfDoXSIR2( SXsvfInfo* pXsvfInfo );
-int xsvfDoXSDR( SXsvfInfo* pXsvfInfo );
-int xsvfDoXRUNTEST( SXsvfInfo* pXsvfInfo );
-int xsvfDoXREPEAT( SXsvfInfo* pXsvfInfo );
-int xsvfDoXSDRSIZE( SXsvfInfo* pXsvfInfo );
-int xsvfDoXSDRTDO( SXsvfInfo* pXsvfInfo );
-int xsvfDoXSETSDRMASKS( SXsvfInfo* pXsvfInfo );
-int xsvfDoXSDRINC( SXsvfInfo* pXsvfInfo );
-int xsvfDoXSDRBCE( SXsvfInfo* pXsvfInfo );
-int xsvfDoXSDRTDOBCE( SXsvfInfo* pXsvfInfo );
-int xsvfDoXSTATE( SXsvfInfo* pXsvfInfo );
-int xsvfDoXENDXR( SXsvfInfo* pXsvfInfo );
-int xsvfDoXCOMMENT( SXsvfInfo* pXsvfInfo );
-int xsvfDoXWAIT( SXsvfInfo* pXsvfInfo );
-/* Insert new command functions here */
-
-/*============================================================================
- * XSVF Global Variables
- ============================================================================*/
-
-/* Array of XSVF command functions.  Must follow command byte value order! */
-/* If your compiler cannot take this form, then convert to a switch statement*/
-TXsvfDoCmdFuncPtr   xsvf_pfDoCmd[]  =
-{
-	xsvfDoXCOMPLETE,        /*  0 */
-	xsvfDoXTDOMASK,         /*  1 */
-	xsvfDoXSIR,             /*  2 */
-	xsvfDoXSDR,             /*  3 */
-	xsvfDoXRUNTEST,         /*  4 */
-	xsvfDoIllegalCmd,       /*  5 */
-	xsvfDoIllegalCmd,       /*  6 */
-	xsvfDoXREPEAT,          /*  7 */
-	xsvfDoXSDRSIZE,         /*  8 */
-	xsvfDoXSDRTDO,          /*  9 */
-#ifdef  XSVF_SUPPORT_COMPRESSION
-	xsvfDoXSETSDRMASKS,     /* 10 */
-	xsvfDoXSDRINC,          /* 11 */
-#else
-	xsvfDoIllegalCmd,       /* 10 */
-	xsvfDoIllegalCmd,       /* 11 */
-#endif  /* XSVF_SUPPORT_COMPRESSION */
-	xsvfDoXSDRBCE,          /* 12 */
-	xsvfDoXSDRBCE,          /* 13 */
-	xsvfDoXSDRBCE,          /* 14 */
-	xsvfDoXSDRTDOBCE,       /* 15 */
-	xsvfDoXSDRTDOBCE,       /* 16 */
-	xsvfDoXSDRTDOBCE,       /* 17 */
-	xsvfDoXSTATE,           /* 18 */
-	xsvfDoXENDXR,           /* 19 */
-	xsvfDoXENDXR,           /* 20 */
-	xsvfDoXSIR2,            /* 21 */
-	xsvfDoXCOMMENT,         /* 22 */
-	xsvfDoXWAIT             /* 23 */
-/* Insert new command functions here */
-};
-
-#ifdef  DEBUG_MODE
-char* xsvf_pzCommandName[]  =
-{
-	"XCOMPLETE",
-	"XTDOMASK",
-	"XSIR",
-	"XSDR",
-	"XRUNTEST",
-	"Reserved5",
-	"Reserved6",
-	"XREPEAT",
-	"XSDRSIZE",
-	"XSDRTDO",
-	"XSETSDRMASKS",
-	"XSDRINC",
-	"XSDRB",
-	"XSDRC",
-	"XSDRE",
-	"XSDRTDOB",
-	"XSDRTDOC",
-	"XSDRTDOE",
-	"XSTATE",
-	"XENDIR",
-	"XENDDR",
-	"XSIR2",
-	"XCOMMENT",
-	"XWAIT"
-};
-
-char*   xsvf_pzErrorName[]  =
-{
-	"No error",
-	"ERROR:  Unknown",
-	"ERROR:  TDO mismatch",
-	"ERROR:  TDO mismatch and exceeded max retries",
-	"ERROR:  Unsupported XSVF command",
-	"ERROR:  Illegal state specification",
-	"ERROR:  Data overflows allocated MAX_LEN buffer size"
-};
-
-char*   xsvf_pzTapState[] =
-{
-	"RESET",        /* 0x00 */
-	"RUNTEST/IDLE", /* 0x01 */
-	"DRSELECT",     /* 0x02 */
-	"DRCAPTURE",    /* 0x03 */
-	"DRSHIFT",      /* 0x04 */
-	"DREXIT1",      /* 0x05 */
-	"DRPAUSE",      /* 0x06 */
-	"DREXIT2",      /* 0x07 */
-	"DRUPDATE",     /* 0x08 */
-	"IRSELECT",     /* 0x09 */
-	"IRCAPTURE",    /* 0x0A */
-	"IRSHIFT",      /* 0x0B */
-	"IREXIT1",      /* 0x0C */
-	"IRPAUSE",      /* 0x0D */
-	"IREXIT2",      /* 0x0E */
-	"IRUPDATE"      /* 0x0F */
-};
-#endif  /* DEBUG_MODE */
-
-/*#ifdef DEBUG_MODE	*/
-/*    FILE* in;   /XXX* Legacy DEBUG_MODE file pointer */
-int xsvf_iDebugLevel;
-/*#endif /XXX* DEBUG_MODE */
-
-/*============================================================================
- * Utility Functions
- ============================================================================*/
-
-/*****************************************************************************
- * Function:     xsvfPrintLenVal
- * Description:  Print the lenval value in hex.
- * Parameters:   plv     - ptr to lenval.
- * Returns:      void.
- *****************************************************************************/
-#ifdef  DEBUG_MODE
-void xsvfPrintLenVal( lenVal *plv )
-{
-	int i;
-
-	if ( plv )
-	{
-		printf( "0x" );
-		for ( i = 0; i < plv->len; ++i )
-		{
-			printf( "%02x", ((unsigned int)(plv->val[ i ])) );
-		}
-	}
-}
-#endif  /* DEBUG_MODE */
-
-
-/*****************************************************************************
- * Function:     xsvfInfoInit
- * Description:  Initialize the xsvfInfo data.
- * Parameters:   pXsvfInfo   - ptr to the XSVF info structure.
- * Returns:      int         - 0 = success; otherwise error.
- *****************************************************************************/
-int xsvfInfoInit( SXsvfInfo* pXsvfInfo )
-{
-	XSVFDBG_PRINTF1( 4, "    sizeof( SXsvfInfo ) = %d bytes\n",
-			 sizeof( SXsvfInfo ) );
-
-	pXsvfInfo->ucComplete       = 0;
-	pXsvfInfo->ucCommand        = XCOMPLETE;
-	pXsvfInfo->lCommandCount    = 0;
-	pXsvfInfo->iErrorCode       = XSVF_ERROR_NONE;
-	pXsvfInfo->ucMaxRepeat      = 0;
-	pXsvfInfo->ucTapState       = XTAPSTATE_RESET;
-	pXsvfInfo->ucEndIR          = XTAPSTATE_RUNTEST;
-	pXsvfInfo->ucEndDR          = XTAPSTATE_RUNTEST;
-	pXsvfInfo->lShiftLengthBits = 0L;
-	pXsvfInfo->sShiftLengthBytes= 0;
-	pXsvfInfo->lRunTestTime     = 0L;
-
-	return( 0 );
-}
-
-/*****************************************************************************
- * Function:     xsvfInfoCleanup
- * Description:  Cleanup the xsvfInfo data.
- * Parameters:   pXsvfInfo   - ptr to the XSVF info structure.
- * Returns:      void.
- *****************************************************************************/
-void xsvfInfoCleanup( SXsvfInfo* pXsvfInfo )
-{
-}
-
-/*****************************************************************************
- * Function:     xsvfGetAsNumBytes
- * Description:  Calculate the number of bytes the given number of bits
- *               consumes.
- * Parameters:   lNumBits    - the number of bits.
- * Returns:      short       - the number of bytes to store the number of bits.
- *****************************************************************************/
-short xsvfGetAsNumBytes( long lNumBits )
-{
-	return( (short)( ( lNumBits + 7L ) / 8L ) );
-}
-
-/*****************************************************************************
- * Function:     xsvfTmsTransition
- * Description:  Apply TMS and transition TAP controller by applying one TCK
- *               cycle.
- * Parameters:   sTms    - new TMS value.
- * Returns:      void.
- *****************************************************************************/
-void xsvfTmsTransition( short sTms )
-{
-	setPort( TMS, sTms );
-	setPort( TCK, 0 );
-	setPort( TCK, 1 );
-}
-
-/*****************************************************************************
- * Function:     xsvfGotoTapState
- * Description:  From the current TAP state, go to the named TAP state.
- *               A target state of RESET ALWAYS causes TMS reset sequence.
- *               All SVF standard stable state paths are supported.
- *               All state transitions are supported except for the following
- *               which cause an XSVF_ERROR_ILLEGALSTATE:
- *                   - Target==DREXIT2;  Start!=DRPAUSE
- *                   - Target==IREXIT2;  Start!=IRPAUSE
- * Parameters:   pucTapState     - Current TAP state; returns final TAP state.
- *               ucTargetState   - New target TAP state.
- * Returns:      int             - 0 = success; otherwise error.
- *****************************************************************************/
-int xsvfGotoTapState( unsigned char*   pucTapState,
-		      unsigned char    ucTargetState )
-{
-	int i;
-	int iErrorCode;
-
-	iErrorCode  = XSVF_ERROR_NONE;
-	if ( ucTargetState == XTAPSTATE_RESET )
-	{
-		/* If RESET, always perform TMS reset sequence to reset/sync TAPs */
-		xsvfTmsTransition( 1 );
-		for ( i = 0; i < 5; ++i )
-		{
-			setPort( TCK, 0 );
-			setPort( TCK, 1 );
-		}
-		*pucTapState    = XTAPSTATE_RESET;
-		XSVFDBG_PRINTF( 3, "   TMS Reset Sequence -> Test-Logic-Reset\n" );
-		XSVFDBG_PRINTF1( 3, "   TAP State = %s\n",
-				 xsvf_pzTapState[ *pucTapState ] );
-	} else if ( ( ucTargetState != *pucTapState ) &&
-		  ( ( ( ucTargetState == XTAPSTATE_EXIT2DR ) && ( *pucTapState != XTAPSTATE_PAUSEDR ) ) ||
-		    ( ( ucTargetState == XTAPSTATE_EXIT2IR ) && ( *pucTapState != XTAPSTATE_PAUSEIR ) ) ) )
-	{
-		/* Trap illegal TAP state path specification */
-		iErrorCode      = XSVF_ERROR_ILLEGALSTATE;
-	} else {
-		if ( ucTargetState == *pucTapState )
-		{
-			/* Already in target state.  Do nothing except when in DRPAUSE
-			   or in IRPAUSE to comply with SVF standard */
-			if ( ucTargetState == XTAPSTATE_PAUSEDR )
-			{
-				xsvfTmsTransition( 1 );
-				*pucTapState    = XTAPSTATE_EXIT2DR;
-				XSVFDBG_PRINTF1( 3, "   TAP State = %s\n",
-						 xsvf_pzTapState[ *pucTapState ] );
-			}
-			else if ( ucTargetState == XTAPSTATE_PAUSEIR )
-			{
-				xsvfTmsTransition( 1 );
-				*pucTapState    = XTAPSTATE_EXIT2IR;
-				XSVFDBG_PRINTF1( 3, "   TAP State = %s\n",
-						 xsvf_pzTapState[ *pucTapState ] );
-			}
-		}
-
-		/* Perform TAP state transitions to get to the target state */
-		while ( ucTargetState != *pucTapState )
-		{
-			switch ( *pucTapState )
-			{
-			case XTAPSTATE_RESET:
-				xsvfTmsTransition( 0 );
-				*pucTapState    = XTAPSTATE_RUNTEST;
-				break;
-			case XTAPSTATE_RUNTEST:
-				xsvfTmsTransition( 1 );
-				*pucTapState    = XTAPSTATE_SELECTDR;
-				break;
-			case XTAPSTATE_SELECTDR:
-				if ( ucTargetState >= XTAPSTATE_IRSTATES )
-				{
-					xsvfTmsTransition( 1 );
-					*pucTapState    = XTAPSTATE_SELECTIR;
-				}
-				else
-				{
-					xsvfTmsTransition( 0 );
-					*pucTapState    = XTAPSTATE_CAPTUREDR;
-				}
-				break;
-			case XTAPSTATE_CAPTUREDR:
-				if ( ucTargetState == XTAPSTATE_SHIFTDR )
-				{
-					xsvfTmsTransition( 0 );
-					*pucTapState    = XTAPSTATE_SHIFTDR;
-				}
-				else
-				{
-					xsvfTmsTransition( 1 );
-					*pucTapState    = XTAPSTATE_EXIT1DR;
-				}
-				break;
-			case XTAPSTATE_SHIFTDR:
-				xsvfTmsTransition( 1 );
-				*pucTapState    = XTAPSTATE_EXIT1DR;
-				break;
-			case XTAPSTATE_EXIT1DR:
-				if ( ucTargetState == XTAPSTATE_PAUSEDR )
-				{
-					xsvfTmsTransition( 0 );
-					*pucTapState    = XTAPSTATE_PAUSEDR;
-				}
-				else
-				{
-					xsvfTmsTransition( 1 );
-					*pucTapState    = XTAPSTATE_UPDATEDR;
-				}
-				break;
-			case XTAPSTATE_PAUSEDR:
-				xsvfTmsTransition( 1 );
-				*pucTapState    = XTAPSTATE_EXIT2DR;
-				break;
-			case XTAPSTATE_EXIT2DR:
-				if ( ucTargetState == XTAPSTATE_SHIFTDR )
-				{
-					xsvfTmsTransition( 0 );
-					*pucTapState    = XTAPSTATE_SHIFTDR;
-				}
-				else
-				{
-					xsvfTmsTransition( 1 );
-					*pucTapState    = XTAPSTATE_UPDATEDR;
-				}
-				break;
-			case XTAPSTATE_UPDATEDR:
-				if ( ucTargetState == XTAPSTATE_RUNTEST )
-				{
-					xsvfTmsTransition( 0 );
-					*pucTapState    = XTAPSTATE_RUNTEST;
-				}
-				else
-				{
-					xsvfTmsTransition( 1 );
-					*pucTapState    = XTAPSTATE_SELECTDR;
-				}
-				break;
-			case XTAPSTATE_SELECTIR:
-				xsvfTmsTransition( 0 );
-				*pucTapState    = XTAPSTATE_CAPTUREIR;
-				break;
-			case XTAPSTATE_CAPTUREIR:
-				if ( ucTargetState == XTAPSTATE_SHIFTIR )
-				{
-					xsvfTmsTransition( 0 );
-					*pucTapState    = XTAPSTATE_SHIFTIR;
-				}
-				else
-				{
-					xsvfTmsTransition( 1 );
-					*pucTapState    = XTAPSTATE_EXIT1IR;
-				}
-				break;
-			case XTAPSTATE_SHIFTIR:
-				xsvfTmsTransition( 1 );
-				*pucTapState    = XTAPSTATE_EXIT1IR;
-				break;
-			case XTAPSTATE_EXIT1IR:
-				if ( ucTargetState == XTAPSTATE_PAUSEIR )
-				{
-					xsvfTmsTransition( 0 );
-					*pucTapState    = XTAPSTATE_PAUSEIR;
-				}
-				else
-				{
-					xsvfTmsTransition( 1 );
-					*pucTapState    = XTAPSTATE_UPDATEIR;
-				}
-				break;
-			case XTAPSTATE_PAUSEIR:
-				xsvfTmsTransition( 1 );
-				*pucTapState    = XTAPSTATE_EXIT2IR;
-				break;
-			case XTAPSTATE_EXIT2IR:
-				if ( ucTargetState == XTAPSTATE_SHIFTIR )
-				{
-					xsvfTmsTransition( 0 );
-					*pucTapState    = XTAPSTATE_SHIFTIR;
-				}
-				else
-				{
-					xsvfTmsTransition( 1 );
-					*pucTapState    = XTAPSTATE_UPDATEIR;
-				}
-				break;
-			case XTAPSTATE_UPDATEIR:
-				if ( ucTargetState == XTAPSTATE_RUNTEST )
-				{
-					xsvfTmsTransition( 0 );
-					*pucTapState    = XTAPSTATE_RUNTEST;
-				}
-				else
-				{
-					xsvfTmsTransition( 1 );
-					*pucTapState    = XTAPSTATE_SELECTDR;
-				}
-				break;
-			default:
-				iErrorCode      = XSVF_ERROR_ILLEGALSTATE;
-				*pucTapState    = ucTargetState;    /* Exit while loop */
-				break;
-			}
-			XSVFDBG_PRINTF1( 3, "   TAP State = %s\n",
-					 xsvf_pzTapState[ *pucTapState ] );
-		}
-	}
-
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfShiftOnly
- * Description:  Assumes that starting TAP state is SHIFT-DR or SHIFT-IR.
- *               Shift the given TDI data into the JTAG scan chain.
- *               Optionally, save the TDO data shifted out of the scan chain.
- *               Last shift cycle is special:  capture last TDO, set last TDI,
- *               but does not pulse TCK.  Caller must pulse TCK and optionally
- *               set TMS=1 to exit shift state.
- * Parameters:   lNumBits        - number of bits to shift.
- *               plvTdi          - ptr to lenval for TDI data.
- *               plvTdoCaptured  - ptr to lenval for storing captured TDO data.
- *               iExitShift      - 1=exit at end of shift; 0=stay in Shift-DR.
- * Returns:      void.
- *****************************************************************************/
-void xsvfShiftOnly( long    lNumBits,
-		    lenVal* plvTdi,
-		    lenVal* plvTdoCaptured,
-		    int     iExitShift )
-{
-	unsigned char*  pucTdi;
-	unsigned char*  pucTdo;
-	unsigned char   ucTdiByte;
-	unsigned char   ucTdoByte;
-	unsigned char   ucTdoBit;
-	int             i;
-
-	/* assert( ( ( lNumBits + 7 ) / 8 ) == plvTdi->len ); */
-
-	/* Initialize TDO storage len == TDI len */
-	pucTdo  = 0;
-	if ( plvTdoCaptured )
-	{
-		plvTdoCaptured->len = plvTdi->len;
-		pucTdo              = plvTdoCaptured->val + plvTdi->len;
-	}
-
-	/* Shift LSB first.  val[N-1] == LSB.  val[0] == MSB. */
-	pucTdi  = plvTdi->val + plvTdi->len;
-	while ( lNumBits )
-	{
-		/* Process on a byte-basis */
-		ucTdiByte   = (*(--pucTdi));
-		ucTdoByte   = 0;
-		for ( i = 0; ( lNumBits && ( i < 8 ) ); ++i )
-		{
-			--lNumBits;
-			if ( iExitShift && !lNumBits )
-			{
-				/* Exit Shift-DR state */
-				setPort( TMS, 1 );
-			}
-
-			/* Set the new TDI value */
-			setPort( TDI, (short)(ucTdiByte & 1) );
-			ucTdiByte   >>= 1;
-
-			/* Set TCK low */
-			setPort( TCK, 0 );
-
-			if ( pucTdo )
-			{
-				/* Save the TDO value */
-				ucTdoBit    = readTDOBit();
-				ucTdoByte   |= ( ucTdoBit << i );
-			}
-
-			/* Set TCK high */
-			setPort( TCK, 1 );
-		}
-
-		/* Save the TDO byte value */
-		if ( pucTdo )
-		{
-			(*(--pucTdo))   = ucTdoByte;
-		}
-	}
-}
-
-/*****************************************************************************
- * Function:     xsvfShift
- * Description:  Goes to the given starting TAP state.
- *               Calls xsvfShiftOnly to shift in the given TDI data and
- *               optionally capture the TDO data.
- *               Compares the TDO captured data against the TDO expected
- *               data.
- *               If a data mismatch occurs, then executes the exception
- *               handling loop upto ucMaxRepeat times.
- * Parameters:   pucTapState     - Ptr to current TAP state.
- *               ucStartState    - Starting shift state: Shift-DR or Shift-IR.
- *               lNumBits        - number of bits to shift.
- *               plvTdi          - ptr to lenval for TDI data.
- *               plvTdoCaptured  - ptr to lenval for storing TDO data.
- *               plvTdoExpected  - ptr to expected TDO data.
- *               plvTdoMask      - ptr to TDO mask.
- *               ucEndState      - state in which to end the shift.
- *               lRunTestTime    - amount of time to wait after the shift.
- *               ucMaxRepeat     - Maximum number of retries on TDO mismatch.
- * Returns:      int             - 0 = success; otherwise TDO mismatch.
- * Notes:        XC9500XL-only Optimization:
- *               Skip the waitTime() if plvTdoMask->val[0:plvTdoMask->len-1]
- *               is NOT all zeros and sMatch==1.
- *****************************************************************************/
-int xsvfShift( unsigned char*   pucTapState,
-	       unsigned char    ucStartState,
-	       long             lNumBits,
-	       lenVal*          plvTdi,
-	       lenVal*          plvTdoCaptured,
-	       lenVal*          plvTdoExpected,
-	       lenVal*          plvTdoMask,
-	       unsigned char    ucEndState,
-	       long             lRunTestTime,
-	       unsigned char    ucMaxRepeat )
-{
-	int             iErrorCode;
-	int             iMismatch;
-	unsigned char   ucRepeat;
-	int             iExitShift;
-
-	iErrorCode  = XSVF_ERROR_NONE;
-	iMismatch   = 0;
-	ucRepeat    = 0;
-	iExitShift  = ( ucStartState != ucEndState );
-
-	XSVFDBG_PRINTF1( 3, "   Shift Length = %ld\n", lNumBits );
-	XSVFDBG_PRINTF( 4, "    TDI          = ");
-	XSVFDBG_PRINTLENVAL( 4, plvTdi );
-	XSVFDBG_PRINTF( 4, "\n");
-	XSVFDBG_PRINTF( 4, "    TDO Expected = ");
-	XSVFDBG_PRINTLENVAL( 4, plvTdoExpected );
-	XSVFDBG_PRINTF( 4, "\n");
-
-	if ( !lNumBits )
-	{
-		/* Compatibility with XSVF2.00:  XSDR 0 = no shift, but wait in RTI */
-		if ( lRunTestTime )
-		{
-			/* Wait for prespecified XRUNTEST time */
-			xsvfGotoTapState( pucTapState, XTAPSTATE_RUNTEST );
-			XSVFDBG_PRINTF1( 3, "   Wait = %ld usec\n", lRunTestTime );
-			waitTime( lRunTestTime );
-		}
-	}
-	else
-	{
-		do
-		{
-			/* Goto Shift-DR or Shift-IR */
-			xsvfGotoTapState( pucTapState, ucStartState );
-
-			/* Shift TDI and capture TDO */
-			xsvfShiftOnly( lNumBits, plvTdi, plvTdoCaptured, iExitShift );
-
-			if ( plvTdoExpected )
-			{
-				/* Compare TDO data to expected TDO data */
-				iMismatch   = !EqualLenVal( plvTdoExpected,
-							    plvTdoCaptured,
-							    plvTdoMask );
-			}
-
-			if ( iExitShift )
-			{
-				/* Update TAP state:  Shift->Exit */
-				++(*pucTapState);
-				XSVFDBG_PRINTF1( 3, "   TAP State = %s\n",
-						 xsvf_pzTapState[ *pucTapState ] );
-
-				if ( iMismatch && lRunTestTime && ( ucRepeat < ucMaxRepeat ) )
-				{
-					XSVFDBG_PRINTF( 4, "    TDO Expected = ");
-					XSVFDBG_PRINTLENVAL( 4, plvTdoExpected );
-					XSVFDBG_PRINTF( 4, "\n");
-					XSVFDBG_PRINTF( 4, "    TDO Captured = ");
-					XSVFDBG_PRINTLENVAL( 4, plvTdoCaptured );
-					XSVFDBG_PRINTF( 4, "\n");
-					XSVFDBG_PRINTF( 4, "    TDO Mask     = ");
-					XSVFDBG_PRINTLENVAL( 4, plvTdoMask );
-					XSVFDBG_PRINTF( 4, "\n");
-					XSVFDBG_PRINTF1( 3, "   Retry #%d\n", ( ucRepeat + 1 ) );
-					/* Do exception handling retry - ShiftDR only */
-					xsvfGotoTapState( pucTapState, XTAPSTATE_PAUSEDR );
-					/* Shift 1 extra bit */
-					xsvfGotoTapState( pucTapState, XTAPSTATE_SHIFTDR );
-					/* Increment RUNTEST time by an additional 25% */
-					lRunTestTime    += ( lRunTestTime >> 2 );
-				}
-				else
-				{
-					/* Do normal exit from Shift-XR */
-					xsvfGotoTapState( pucTapState, ucEndState );
-				}
-
-				if ( lRunTestTime )
-				{
-					/* Wait for prespecified XRUNTEST time */
-					xsvfGotoTapState( pucTapState, XTAPSTATE_RUNTEST );
-					XSVFDBG_PRINTF1( 3, "   Wait = %ld usec\n", lRunTestTime );
-					waitTime( lRunTestTime );
-				}
-			}
-		} while ( iMismatch && ( ucRepeat++ < ucMaxRepeat ) );
-	}
-
-	if ( iMismatch )
-	{
-		XSVFDBG_PRINTF( 1, " TDO Expected = ");
-		XSVFDBG_PRINTLENVAL( 1, plvTdoExpected );
-		XSVFDBG_PRINTF( 1, "\n");
-		XSVFDBG_PRINTF( 1, " TDO Captured = ");
-		XSVFDBG_PRINTLENVAL( 1, plvTdoCaptured );
-		XSVFDBG_PRINTF( 1, "\n");
-		XSVFDBG_PRINTF( 1, " TDO Mask     = ");
-		XSVFDBG_PRINTLENVAL( 1, plvTdoMask );
-		XSVFDBG_PRINTF( 1, "\n");
-		if ( ucMaxRepeat && ( ucRepeat > ucMaxRepeat ) )
-		{
-			iErrorCode  = XSVF_ERROR_MAXRETRIES;
-		}
-		else
-		{
-			iErrorCode  = XSVF_ERROR_TDOMISMATCH;
-		}
-	}
-
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfBasicXSDRTDO
- * Description:  Get the XSDRTDO parameters and execute the XSDRTDO command.
- *               This is the common function for all XSDRTDO commands.
- * Parameters:   pucTapState         - Current TAP state.
- *               lShiftLengthBits    - number of bits to shift.
- *               sShiftLengthBytes   - number of bytes to read.
- *               plvTdi              - ptr to lenval for TDI data.
- *               lvTdoCaptured       - ptr to lenval for storing TDO data.
- *               iEndState           - state in which to end the shift.
- *               lRunTestTime        - amount of time to wait after the shift.
- *               ucMaxRepeat         - maximum xc9500/xl retries.
- * Returns:      int                 - 0 = success; otherwise TDO mismatch.
- *****************************************************************************/
-int xsvfBasicXSDRTDO( unsigned char*    pucTapState,
-		      long              lShiftLengthBits,
-		      short             sShiftLengthBytes,
-		      lenVal*           plvTdi,
-		      lenVal*           plvTdoCaptured,
-		      lenVal*           plvTdoExpected,
-		      lenVal*           plvTdoMask,
-		      unsigned char     ucEndState,
-		      long              lRunTestTime,
-		      unsigned char     ucMaxRepeat )
-{
-	readVal( plvTdi, sShiftLengthBytes );
-	if ( plvTdoExpected )
-	{
-		readVal( plvTdoExpected, sShiftLengthBytes );
-	}
-	return( xsvfShift( pucTapState, XTAPSTATE_SHIFTDR, lShiftLengthBits,
-			   plvTdi, plvTdoCaptured, plvTdoExpected, plvTdoMask,
-			   ucEndState, lRunTestTime, ucMaxRepeat ) );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoSDRMasking
- * Description:  Update the data value with the next XSDRINC data and address.
- * Example:      dataVal=0x01ff, nextData=0xab, addressMask=0x0100,
- *               dataMask=0x00ff, should set dataVal to 0x02ab
- * Parameters:   plvTdi          - The current TDI value.
- *               plvNextData     - the next data value.
- *               plvAddressMask  - the address mask.
- *               plvDataMask     - the data mask.
- * Returns:      void.
- *****************************************************************************/
-#ifdef  XSVF_SUPPORT_COMPRESSION
-void xsvfDoSDRMasking( lenVal*  plvTdi,
-		       lenVal*  plvNextData,
-		       lenVal*  plvAddressMask,
-		       lenVal*  plvDataMask )
-{
-	int             i;
-	unsigned char   ucTdi;
-	unsigned char   ucTdiMask;
-	unsigned char   ucDataMask;
-	unsigned char   ucNextData;
-	unsigned char   ucNextMask;
-	short           sNextData;
-
-	/* add the address Mask to dataVal and return as a new dataVal */
-	addVal( plvTdi, plvTdi, plvAddressMask );
-
-	ucNextData  = 0;
-	ucNextMask  = 0;
-	sNextData   = plvNextData->len;
-	for ( i = plvDataMask->len - 1; i >= 0; --i )
-	{
-		/* Go through data mask in reverse order looking for mask (1) bits */
-		ucDataMask  = plvDataMask->val[ i ];
-		if ( ucDataMask )
-		{
-			/* Retrieve the corresponding TDI byte value */
-			ucTdi       = plvTdi->val[ i ];
-
-			/* For each bit in the data mask byte, look for 1's */
-			ucTdiMask   = 1;
-			while ( ucDataMask )
-			{
-				if ( ucDataMask & 1 )
-				{
-					if ( !ucNextMask )
-					{
-						/* Get the next data byte */
-						ucNextData  = plvNextData->val[ --sNextData ];
-						ucNextMask  = 1;
-					}
-
-					/* Set or clear the data bit according to the next data */
-					if ( ucNextData & ucNextMask )
-					{
-						ucTdi   |= ucTdiMask;       /* Set bit */
-					}
-					else
-					{
-						ucTdi   &= ( ~ucTdiMask );  /* Clear bit */
-					}
-
-					/* Update the next data */
-					ucNextMask  <<= 1;
-				}
-				ucTdiMask   <<= 1;
-				ucDataMask  >>= 1;
-			}
-
-			/* Update the TDI value */
-			plvTdi->val[ i ]    = ucTdi;
-		}
-	}
-}
-#endif  /* XSVF_SUPPORT_COMPRESSION */
-
-/*============================================================================
- * XSVF Command Functions (type = TXsvfDoCmdFuncPtr)
- * These functions update pXsvfInfo->iErrorCode only on an error.
- * Otherwise, the error code is left alone.
- * The function returns the error code from the function.
- ============================================================================*/
-
-/*****************************************************************************
- * Function:     xsvfDoIllegalCmd
- * Description:  Function place holder for illegal/unsupported commands.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoIllegalCmd( SXsvfInfo* pXsvfInfo )
-{
-	XSVFDBG_PRINTF2( 0, "ERROR:  Encountered unsupported command #%d (%s)\n",
-			 ((unsigned int)(pXsvfInfo->ucCommand)),
-			 ((pXsvfInfo->ucCommand < XLASTCMD)
-			  ? (xsvf_pzCommandName[pXsvfInfo->ucCommand])
-			  : "Unknown") );
-	pXsvfInfo->iErrorCode   = XSVF_ERROR_ILLEGALCMD;
-	return( pXsvfInfo->iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXCOMPLETE
- * Description:  XCOMPLETE (no parameters)
- *               Update complete status for XSVF player.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXCOMPLETE( SXsvfInfo* pXsvfInfo )
-{
-	pXsvfInfo->ucComplete   = 1;
-	return( XSVF_ERROR_NONE );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXTDOMASK
- * Description:  XTDOMASK <lenVal.TdoMask[XSDRSIZE]>
- *               Prespecify the TDO compare mask.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXTDOMASK( SXsvfInfo* pXsvfInfo )
-{
-	readVal( &(pXsvfInfo->lvTdoMask), pXsvfInfo->sShiftLengthBytes );
-	XSVFDBG_PRINTF( 4, "    TDO Mask     = ");
-	XSVFDBG_PRINTLENVAL( 4, &(pXsvfInfo->lvTdoMask) );
-	XSVFDBG_PRINTF( 4, "\n");
-	return( XSVF_ERROR_NONE );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXSIR
- * Description:  XSIR <(byte)shiftlen> <lenVal.TDI[shiftlen]>
- *               Get the instruction and shift the instruction into the TAP.
- *               If prespecified XRUNTEST!=0, goto RUNTEST and wait after
- *               the shift for XRUNTEST usec.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXSIR( SXsvfInfo* pXsvfInfo )
-{
-	unsigned char   ucShiftIrBits;
-	short           sShiftIrBytes;
-	int             iErrorCode;
-
-	/* Get the shift length and store */
-	readByte( &ucShiftIrBits );
-	sShiftIrBytes   = xsvfGetAsNumBytes( ucShiftIrBits );
-	XSVFDBG_PRINTF1( 3, "   XSIR length = %d\n",
-			 ((unsigned int)ucShiftIrBits) );
-
-	if ( sShiftIrBytes > MAX_LEN )
-	{
-		iErrorCode  = XSVF_ERROR_DATAOVERFLOW;
-	}
-	else
-	{
-		/* Get and store instruction to shift in */
-		readVal( &(pXsvfInfo->lvTdi), xsvfGetAsNumBytes( ucShiftIrBits ) );
-
-		/* Shift the data */
-		iErrorCode  = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTIR,
-					 ucShiftIrBits, &(pXsvfInfo->lvTdi),
-					 /*plvTdoCaptured*/0, /*plvTdoExpected*/0,
-					 /*plvTdoMask*/0, pXsvfInfo->ucEndIR,
-					 pXsvfInfo->lRunTestTime, /*ucMaxRepeat*/0 );
-	}
-
-	if ( iErrorCode != XSVF_ERROR_NONE )
-	{
-		pXsvfInfo->iErrorCode   = iErrorCode;
-	}
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXSIR2
- * Description:  XSIR <(2-byte)shiftlen> <lenVal.TDI[shiftlen]>
- *               Get the instruction and shift the instruction into the TAP.
- *               If prespecified XRUNTEST!=0, goto RUNTEST and wait after
- *               the shift for XRUNTEST usec.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXSIR2( SXsvfInfo* pXsvfInfo )
-{
-	long            lShiftIrBits;
-	short           sShiftIrBytes;
-	int             iErrorCode;
-
-	/* Get the shift length and store */
-	readVal( &(pXsvfInfo->lvTdi), 2 );
-	lShiftIrBits    = value( &(pXsvfInfo->lvTdi) );
-	sShiftIrBytes   = xsvfGetAsNumBytes( lShiftIrBits );
-	XSVFDBG_PRINTF1( 3, "   XSIR2 length = %d\n", (int)lShiftIrBits);
-
-	if ( sShiftIrBytes > MAX_LEN )
-	{
-		iErrorCode  = XSVF_ERROR_DATAOVERFLOW;
-	}
-	else
-	{
-		/* Get and store instruction to shift in */
-		readVal( &(pXsvfInfo->lvTdi), xsvfGetAsNumBytes( lShiftIrBits ) );
-
-		/* Shift the data */
-		iErrorCode  = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTIR,
-					 lShiftIrBits, &(pXsvfInfo->lvTdi),
-					 /*plvTdoCaptured*/0, /*plvTdoExpected*/0,
-					 /*plvTdoMask*/0, pXsvfInfo->ucEndIR,
-					 pXsvfInfo->lRunTestTime, /*ucMaxRepeat*/0 );
-	}
-
-	if ( iErrorCode != XSVF_ERROR_NONE )
-	{
-		pXsvfInfo->iErrorCode   = iErrorCode;
-	}
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXSDR
- * Description:  XSDR <lenVal.TDI[XSDRSIZE]>
- *               Shift the given TDI data into the JTAG scan chain.
- *               Compare the captured TDO with the expected TDO from the
- *               previous XSDRTDO command using the previously specified
- *               XTDOMASK.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXSDR( SXsvfInfo* pXsvfInfo )
-{
-	int iErrorCode;
-	readVal( &(pXsvfInfo->lvTdi), pXsvfInfo->sShiftLengthBytes );
-	/* use TDOExpected from last XSDRTDO instruction */
-	iErrorCode  = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTDR,
-				 pXsvfInfo->lShiftLengthBits, &(pXsvfInfo->lvTdi),
-				 &(pXsvfInfo->lvTdoCaptured),
-				 &(pXsvfInfo->lvTdoExpected),
-				 &(pXsvfInfo->lvTdoMask), pXsvfInfo->ucEndDR,
-				 pXsvfInfo->lRunTestTime, pXsvfInfo->ucMaxRepeat );
-	if ( iErrorCode != XSVF_ERROR_NONE )
-	{
-		pXsvfInfo->iErrorCode   = iErrorCode;
-	}
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXRUNTEST
- * Description:  XRUNTEST <uint32>
- *               Prespecify the XRUNTEST wait time for shift operations.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXRUNTEST( SXsvfInfo* pXsvfInfo )
-{
-	readVal( &(pXsvfInfo->lvTdi), 4 );
-	pXsvfInfo->lRunTestTime = value( &(pXsvfInfo->lvTdi) );
-	XSVFDBG_PRINTF1( 3, "   XRUNTEST = %ld\n", pXsvfInfo->lRunTestTime );
-	return( XSVF_ERROR_NONE );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXREPEAT
- * Description:  XREPEAT <byte>
- *               Prespecify the maximum number of XC9500/XL retries.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXREPEAT( SXsvfInfo* pXsvfInfo )
-{
-	readByte( &(pXsvfInfo->ucMaxRepeat) );
-	XSVFDBG_PRINTF1( 3, "   XREPEAT = %d\n",
-			 ((unsigned int)(pXsvfInfo->ucMaxRepeat)) );
-	return( XSVF_ERROR_NONE );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXSDRSIZE
- * Description:  XSDRSIZE <uint32>
- *               Prespecify the XRUNTEST wait time for shift operations.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXSDRSIZE( SXsvfInfo* pXsvfInfo )
-{
-	int iErrorCode;
-	iErrorCode  = XSVF_ERROR_NONE;
-	readVal( &(pXsvfInfo->lvTdi), 4 );
-	pXsvfInfo->lShiftLengthBits = value( &(pXsvfInfo->lvTdi) );
-	pXsvfInfo->sShiftLengthBytes= xsvfGetAsNumBytes( pXsvfInfo->lShiftLengthBits );
-	XSVFDBG_PRINTF1( 3, "   XSDRSIZE = %ld\n", pXsvfInfo->lShiftLengthBits );
-	if ( pXsvfInfo->sShiftLengthBytes > MAX_LEN )
-	{
-		iErrorCode  = XSVF_ERROR_DATAOVERFLOW;
-		pXsvfInfo->iErrorCode   = iErrorCode;
-	}
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXSDRTDO
- * Description:  XSDRTDO <lenVal.TDI[XSDRSIZE]> <lenVal.TDO[XSDRSIZE]>
- *               Get the TDI and expected TDO values.  Then, shift.
- *               Compare the expected TDO with the captured TDO using the
- *               prespecified XTDOMASK.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXSDRTDO( SXsvfInfo* pXsvfInfo )
-{
-	int iErrorCode;
-	iErrorCode  = xsvfBasicXSDRTDO( &(pXsvfInfo->ucTapState),
-					pXsvfInfo->lShiftLengthBits,
-					pXsvfInfo->sShiftLengthBytes,
-					&(pXsvfInfo->lvTdi),
-					&(pXsvfInfo->lvTdoCaptured),
-					&(pXsvfInfo->lvTdoExpected),
-					&(pXsvfInfo->lvTdoMask),
-					pXsvfInfo->ucEndDR,
-					pXsvfInfo->lRunTestTime,
-					pXsvfInfo->ucMaxRepeat );
-	if ( iErrorCode != XSVF_ERROR_NONE )
-	{
-		pXsvfInfo->iErrorCode   = iErrorCode;
-	}
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXSETSDRMASKS
- * Description:  XSETSDRMASKS <lenVal.AddressMask[XSDRSIZE]>
- *                            <lenVal.DataMask[XSDRSIZE]>
- *               Get the prespecified address and data mask for the XSDRINC
- *               command.
- *               Used for xc9500/xl compressed XSVF data.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-#ifdef  XSVF_SUPPORT_COMPRESSION
-int xsvfDoXSETSDRMASKS( SXsvfInfo* pXsvfInfo )
-{
-	/* read the addressMask */
-	readVal( &(pXsvfInfo->lvAddressMask), pXsvfInfo->sShiftLengthBytes );
-	/* read the dataMask    */
-	readVal( &(pXsvfInfo->lvDataMask), pXsvfInfo->sShiftLengthBytes );
-
-	XSVFDBG_PRINTF( 4, "    Address Mask = " );
-	XSVFDBG_PRINTLENVAL( 4, &(pXsvfInfo->lvAddressMask) );
-	XSVFDBG_PRINTF( 4, "\n" );
-	XSVFDBG_PRINTF( 4, "    Data Mask    = " );
-	XSVFDBG_PRINTLENVAL( 4, &(pXsvfInfo->lvDataMask) );
-	XSVFDBG_PRINTF( 4, "\n" );
-
-	return( XSVF_ERROR_NONE );
-}
-#endif  /* XSVF_SUPPORT_COMPRESSION */
-
-/*****************************************************************************
- * Function:     xsvfDoXSDRINC
- * Description:  XSDRINC <lenVal.firstTDI[XSDRSIZE]> <byte(numTimes)>
- *                       <lenVal.data[XSETSDRMASKS.dataMask.len]> ...
- *               Get the XSDRINC parameters and execute the XSDRINC command.
- *               XSDRINC starts by loading the first TDI shift value.
- *               Then, for numTimes, XSDRINC gets the next piece of data,
- *               replaces the bits from the starting TDI as defined by the
- *               XSETSDRMASKS.dataMask, adds the address mask from
- *               XSETSDRMASKS.addressMask, shifts the new TDI value,
- *               and compares the TDO to the expected TDO from the previous
- *               XSDRTDO command using the XTDOMASK.
- *               Used for xc9500/xl compressed XSVF data.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-#ifdef  XSVF_SUPPORT_COMPRESSION
-int xsvfDoXSDRINC( SXsvfInfo* pXsvfInfo )
-{
-	int             iErrorCode;
-	int             iDataMaskLen;
-	unsigned char   ucDataMask;
-	unsigned char   ucNumTimes;
-	unsigned char   i;
-
-	readVal( &(pXsvfInfo->lvTdi), pXsvfInfo->sShiftLengthBytes );
-	iErrorCode  = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTDR,
-				 pXsvfInfo->lShiftLengthBits,
-				 &(pXsvfInfo->lvTdi), &(pXsvfInfo->lvTdoCaptured),
-				 &(pXsvfInfo->lvTdoExpected),
-				 &(pXsvfInfo->lvTdoMask), pXsvfInfo->ucEndDR,
-				 pXsvfInfo->lRunTestTime, pXsvfInfo->ucMaxRepeat );
-	if ( !iErrorCode )
-	{
-		/* Calculate number of data mask bits */
-		iDataMaskLen    = 0;
-		for ( i = 0; i < pXsvfInfo->lvDataMask.len; ++i )
-		{
-			ucDataMask  = pXsvfInfo->lvDataMask.val[ i ];
-			while ( ucDataMask )
-			{
-				iDataMaskLen    += ( ucDataMask & 1 );
-				ucDataMask      >>= 1;
-			}
-		}
-
-		/* Get the number of data pieces, i.e. number of times to shift */
-		readByte( &ucNumTimes );
-
-		/* For numTimes, get data, fix TDI, and shift */
-		for ( i = 0; !iErrorCode && ( i < ucNumTimes ); ++i )
-		{
-			readVal( &(pXsvfInfo->lvNextData),
-				 xsvfGetAsNumBytes( iDataMaskLen ) );
-			xsvfDoSDRMasking( &(pXsvfInfo->lvTdi),
-					  &(pXsvfInfo->lvNextData),
-					  &(pXsvfInfo->lvAddressMask),
-					  &(pXsvfInfo->lvDataMask) );
-			iErrorCode  = xsvfShift( &(pXsvfInfo->ucTapState),
-						 XTAPSTATE_SHIFTDR,
-						 pXsvfInfo->lShiftLengthBits,
-						 &(pXsvfInfo->lvTdi),
-						 &(pXsvfInfo->lvTdoCaptured),
-						 &(pXsvfInfo->lvTdoExpected),
-						 &(pXsvfInfo->lvTdoMask),
-						 pXsvfInfo->ucEndDR,
-						 pXsvfInfo->lRunTestTime,
-						 pXsvfInfo->ucMaxRepeat );
-		}
-	}
-	if ( iErrorCode != XSVF_ERROR_NONE )
-	{
-		pXsvfInfo->iErrorCode   = iErrorCode;
-	}
-	return( iErrorCode );
-}
-#endif  /* XSVF_SUPPORT_COMPRESSION */
-
-/*****************************************************************************
- * Function:     xsvfDoXSDRBCE
- * Description:  XSDRB/XSDRC/XSDRE <lenVal.TDI[XSDRSIZE]>
- *               If not already in SHIFTDR, goto SHIFTDR.
- *               Shift the given TDI data into the JTAG scan chain.
- *               Ignore TDO.
- *               If cmd==XSDRE, then goto ENDDR.  Otherwise, stay in ShiftDR.
- *               XSDRB, XSDRC, and XSDRE are the same implementation.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXSDRBCE( SXsvfInfo* pXsvfInfo )
-{
-	unsigned char   ucEndDR;
-	int             iErrorCode;
-	ucEndDR = (unsigned char)(( pXsvfInfo->ucCommand == XSDRE ) ?
-				  pXsvfInfo->ucEndDR : XTAPSTATE_SHIFTDR);
-	iErrorCode  = xsvfBasicXSDRTDO( &(pXsvfInfo->ucTapState),
-					pXsvfInfo->lShiftLengthBits,
-					pXsvfInfo->sShiftLengthBytes,
-					&(pXsvfInfo->lvTdi),
-					/*plvTdoCaptured*/0, /*plvTdoExpected*/0,
-					/*plvTdoMask*/0, ucEndDR,
-					/*lRunTestTime*/0, /*ucMaxRepeat*/0 );
-	if ( iErrorCode != XSVF_ERROR_NONE )
-	{
-		pXsvfInfo->iErrorCode   = iErrorCode;
-	}
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXSDRTDOBCE
- * Description:  XSDRB/XSDRC/XSDRE <lenVal.TDI[XSDRSIZE]> <lenVal.TDO[XSDRSIZE]>
- *               If not already in SHIFTDR, goto SHIFTDR.
- *               Shift the given TDI data into the JTAG scan chain.
- *               Compare TDO, but do NOT use XTDOMASK.
- *               If cmd==XSDRTDOE, then goto ENDDR.  Otherwise, stay in ShiftDR.
- *               XSDRTDOB, XSDRTDOC, and XSDRTDOE are the same implementation.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXSDRTDOBCE( SXsvfInfo* pXsvfInfo )
-{
-	unsigned char   ucEndDR;
-	int             iErrorCode;
-	ucEndDR = (unsigned char)(( pXsvfInfo->ucCommand == XSDRTDOE ) ?
-				  pXsvfInfo->ucEndDR : XTAPSTATE_SHIFTDR);
-	iErrorCode  = xsvfBasicXSDRTDO( &(pXsvfInfo->ucTapState),
-					pXsvfInfo->lShiftLengthBits,
-					pXsvfInfo->sShiftLengthBytes,
-					&(pXsvfInfo->lvTdi),
-					&(pXsvfInfo->lvTdoCaptured),
-					&(pXsvfInfo->lvTdoExpected),
-					/*plvTdoMask*/0, ucEndDR,
-					/*lRunTestTime*/0, /*ucMaxRepeat*/0 );
-	if ( iErrorCode != XSVF_ERROR_NONE )
-	{
-		pXsvfInfo->iErrorCode   = iErrorCode;
-	}
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXSTATE
- * Description:  XSTATE <byte>
- *               <byte> == XTAPSTATE;
- *               Get the state parameter and transition the TAP to that state.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXSTATE( SXsvfInfo* pXsvfInfo )
-{
-	unsigned char   ucNextState;
-	int             iErrorCode;
-	readByte( &ucNextState );
-	iErrorCode  = xsvfGotoTapState( &(pXsvfInfo->ucTapState), ucNextState );
-	if ( iErrorCode != XSVF_ERROR_NONE )
-	{
-		pXsvfInfo->iErrorCode   = iErrorCode;
-	}
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXENDXR
- * Description:  XENDIR/XENDDR <byte>
- *               <byte>:  0 = RUNTEST;  1 = PAUSE.
- *               Get the prespecified XENDIR or XENDDR.
- *               Both XENDIR and XENDDR use the same implementation.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXENDXR( SXsvfInfo* pXsvfInfo )
-{
-	int             iErrorCode;
-	unsigned char   ucEndState;
-
-	iErrorCode  = XSVF_ERROR_NONE;
-	readByte( &ucEndState );
-	if ( ( ucEndState != XENDXR_RUNTEST ) && ( ucEndState != XENDXR_PAUSE ) )
-	{
-		iErrorCode  = XSVF_ERROR_ILLEGALSTATE;
-	}
-	else
-	{
-
-		if ( pXsvfInfo->ucCommand == XENDIR )
-		{
-			if ( ucEndState == XENDXR_RUNTEST )
-			{
-				pXsvfInfo->ucEndIR  = XTAPSTATE_RUNTEST;
-			}
-			else
-			{
-				pXsvfInfo->ucEndIR  = XTAPSTATE_PAUSEIR;
-			}
-			XSVFDBG_PRINTF1( 3, "   ENDIR State = %s\n",
-					 xsvf_pzTapState[ pXsvfInfo->ucEndIR ] );
-		}
-		else    /* XENDDR */
-		{
-			if ( ucEndState == XENDXR_RUNTEST )
-			{
-				pXsvfInfo->ucEndDR  = XTAPSTATE_RUNTEST;
-			}
-			else
-			{
-				pXsvfInfo->ucEndDR  = XTAPSTATE_PAUSEDR;
-			}
-			XSVFDBG_PRINTF1( 3, "   ENDDR State = %s\n",
-					 xsvf_pzTapState[ pXsvfInfo->ucEndDR ] );
-		}
-	}
-
-	if ( iErrorCode != XSVF_ERROR_NONE )
-	{
-		pXsvfInfo->iErrorCode   = iErrorCode;
-	}
-	return( iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXCOMMENT
- * Description:  XCOMMENT <text string ending in \0>
- *               <text string ending in \0> == text comment;
- *               Arbitrary comment embedded in the XSVF.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXCOMMENT( SXsvfInfo* pXsvfInfo )
-{
-	/* Use the comment for debugging */
-	/* Otherwise, read through the comment to the end '\0' and ignore */
-	unsigned char   ucText;
-
-	if ( xsvf_iDebugLevel > 0 )
-	{
-		putc( ' ' );
-	}
-
-	do
-	{
-		readByte( &ucText );
-		if ( xsvf_iDebugLevel > 0 )
-		{
-			putc( ucText ? ucText : '\n' );
-		}
-	} while ( ucText );
-
-	pXsvfInfo->iErrorCode   = XSVF_ERROR_NONE;
-
-	return( pXsvfInfo->iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfDoXWAIT
- * Description:  XWAIT <wait_state> <end_state> <wait_time>
- *               If not already in <wait_state>, then go to <wait_state>.
- *               Wait in <wait_state> for <wait_time> microseconds.
- *               Finally, if not already in <end_state>, then goto <end_state>.
- * Parameters:   pXsvfInfo   - XSVF information pointer.
- * Returns:      int         - 0 = success;  non-zero = error.
- *****************************************************************************/
-int xsvfDoXWAIT( SXsvfInfo* pXsvfInfo )
-{
-	unsigned char   ucWaitState;
-	unsigned char   ucEndState;
-	long            lWaitTime;
-
-	/* Get Parameters */
-	/* <wait_state> */
-	readVal( &(pXsvfInfo->lvTdi), 1 );
-	ucWaitState = pXsvfInfo->lvTdi.val[0];
-
-	/* <end_state> */
-	readVal( &(pXsvfInfo->lvTdi), 1 );
-	ucEndState = pXsvfInfo->lvTdi.val[0];
-
-	/* <wait_time> */
-	readVal( &(pXsvfInfo->lvTdi), 4 );
-	lWaitTime = value( &(pXsvfInfo->lvTdi) );
-	XSVFDBG_PRINTF2( 3, "   XWAIT:  state = %s; time = %ld\n",
-			 xsvf_pzTapState[ ucWaitState ], lWaitTime );
-
-	/* If not already in <wait_state>, go to <wait_state> */
-	if ( pXsvfInfo->ucTapState != ucWaitState )
-	{
-		xsvfGotoTapState( &(pXsvfInfo->ucTapState), ucWaitState );
-	}
-
-	/* Wait for <wait_time> microseconds */
-	waitTime( lWaitTime );
-
-	/* If not already in <end_state>, go to <end_state> */
-	if ( pXsvfInfo->ucTapState != ucEndState )
-	{
-		xsvfGotoTapState( &(pXsvfInfo->ucTapState), ucEndState );
-	}
-
-	return( XSVF_ERROR_NONE );
-}
-
-
-/*============================================================================
- * Execution Control Functions
- ============================================================================*/
-
-/*****************************************************************************
- * Function:     xsvfInitialize
- * Description:  Initialize the xsvf player.
- *               Call this before running the player to initialize the data
- *               in the SXsvfInfo struct.
- *               xsvfCleanup is called to clean up the data in SXsvfInfo
- *               after the XSVF is played.
- * Parameters:   pXsvfInfo   - ptr to the XSVF information.
- * Returns:      int - 0 = success; otherwise error.
- *****************************************************************************/
-int xsvfInitialize( SXsvfInfo* pXsvfInfo )
-{
-	/* Initialize values */
-	pXsvfInfo->iErrorCode   = xsvfInfoInit( pXsvfInfo );
-
-	if ( !pXsvfInfo->iErrorCode )
-	{
-		/* Initialize the TAPs */
-		pXsvfInfo->iErrorCode   = xsvfGotoTapState( &(pXsvfInfo->ucTapState),
-							    XTAPSTATE_RESET );
-	}
-
-	return( pXsvfInfo->iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfRun
- * Description:  Run the xsvf player for a single command and return.
- *               First, call xsvfInitialize.
- *               Then, repeatedly call this function until an error is detected
- *               or until the pXsvfInfo->ucComplete variable is non-zero.
- *               Finally, call xsvfCleanup to cleanup any remnants.
- * Parameters:   pXsvfInfo   - ptr to the XSVF information.
- * Returns:      int         - 0 = success; otherwise error.
- *****************************************************************************/
-int xsvfRun( SXsvfInfo* pXsvfInfo )
-{
-	/* Process the XSVF commands */
-	if ( (!pXsvfInfo->iErrorCode) && (!pXsvfInfo->ucComplete) )
-	{
-		/* read 1 byte for the instruction */
-		readByte( &(pXsvfInfo->ucCommand) );
-		++(pXsvfInfo->lCommandCount);
-
-		if ( pXsvfInfo->ucCommand < XLASTCMD )
-		{
-			/* Execute the command.  Func sets error code. */
-			XSVFDBG_PRINTF1( 2, "  %s\n",
-					 xsvf_pzCommandName[pXsvfInfo->ucCommand] );
-			/* If your compiler cannot take this form,
-			   then convert to a switch statement */
-#if 0 /* test-only */
-			xsvf_pfDoCmd[ pXsvfInfo->ucCommand ]( pXsvfInfo );
-#else
-			switch (pXsvfInfo->ucCommand) {
-			case 0:
-				xsvfDoXCOMPLETE(pXsvfInfo);        /*  0 */
-				break;
-			case 1:
-				xsvfDoXTDOMASK(pXsvfInfo);         /*  1 */
-				break;
-			case 2:
-				xsvfDoXSIR(pXsvfInfo);             /*  2 */
-				break;
-			case 3:
-				xsvfDoXSDR(pXsvfInfo);             /*  3 */
-				break;
-			case 4:
-				xsvfDoXRUNTEST(pXsvfInfo);         /*  4 */
-				break;
-			case 5:
-				xsvfDoIllegalCmd(pXsvfInfo);       /*  5 */
-				break;
-			case 6:
-				xsvfDoIllegalCmd(pXsvfInfo);       /*  6 */
-				break;
-			case 7:
-				xsvfDoXREPEAT(pXsvfInfo);          /*  7 */
-				break;
-			case 8:
-				xsvfDoXSDRSIZE(pXsvfInfo);         /*  8 */
-				break;
-			case 9:
-				xsvfDoXSDRTDO(pXsvfInfo);          /*  9 */
-				break;
-#ifdef  XSVF_SUPPORT_COMPRESSION
-			case 10:
-				xsvfDoXSETSDRMASKS(pXsvfInfo);     /* 10 */
-				break;
-			case 11:
-				xsvfDoXSDRINC(pXsvfInfo);          /* 11 */
-				break;
-#else
-			case 10:
-				xsvfDoIllegalCmd(pXsvfInfo);       /* 10 */
-				break;
-			case 11:
-				xsvfDoIllegalCmd(pXsvfInfo);       /* 11 */
-				break;
-#endif  /* XSVF_SUPPORT_COMPRESSION */
-			case 12:
-				xsvfDoXSDRBCE(pXsvfInfo);          /* 12 */
-				break;
-			case 13:
-				xsvfDoXSDRBCE(pXsvfInfo);          /* 13 */
-				break;
-			case 14:
-				xsvfDoXSDRBCE(pXsvfInfo);          /* 14 */
-				break;
-			case 15:
-				xsvfDoXSDRTDOBCE(pXsvfInfo);       /* 15 */
-				break;
-			case 16:
-				xsvfDoXSDRTDOBCE(pXsvfInfo);       /* 16 */
-				break;
-			case 17:
-				xsvfDoXSDRTDOBCE(pXsvfInfo);       /* 17 */
-				break;
-			case 18:
-				xsvfDoXSTATE(pXsvfInfo);           /* 18 */
-				break;
-			case 19:
-				xsvfDoXENDXR(pXsvfInfo);           /* 19 */
-				break;
-			case 20:
-				xsvfDoXENDXR(pXsvfInfo);           /* 20 */
-				break;
-			case 21:
-				xsvfDoXSIR2(pXsvfInfo);            /* 21 */
-				break;
-			case 22:
-				xsvfDoXCOMMENT(pXsvfInfo);         /* 22 */
-				break;
-			case 23:
-				xsvfDoXWAIT(pXsvfInfo);             /* 23 */
-				break;
-			}
-#endif
-		}
-		else
-		{
-			/* Illegal command value.  Func sets error code. */
-			xsvfDoIllegalCmd( pXsvfInfo );
-		}
-	}
-
-	return( pXsvfInfo->iErrorCode );
-}
-
-/*****************************************************************************
- * Function:     xsvfCleanup
- * Description:  cleanup remnants of the xsvf player.
- * Parameters:   pXsvfInfo   - ptr to the XSVF information.
- * Returns:      void.
- *****************************************************************************/
-void xsvfCleanup( SXsvfInfo* pXsvfInfo )
-{
-	xsvfInfoCleanup( pXsvfInfo );
-}
-
-
-/*============================================================================
- * xsvfExecute() - The primary entry point to the XSVF player
- ============================================================================*/
-
-/*****************************************************************************
- * Function:     xsvfExecute
- * Description:  Process, interpret, and apply the XSVF commands.
- *               See port.c:readByte for source of XSVF data.
- * Parameters:   none.
- * Returns:      int - Legacy result values:  1 == success;  0 == failed.
- *****************************************************************************/
-int xsvfExecute(void)
-{
-	SXsvfInfo   xsvfInfo;
-
-	xsvfInitialize( &xsvfInfo );
-
-	while ( !xsvfInfo.iErrorCode && (!xsvfInfo.ucComplete) )
-	{
-		xsvfRun( &xsvfInfo );
-	}
-
-	if ( xsvfInfo.iErrorCode )
-	{
-		XSVFDBG_PRINTF1( 0, "%s\n", xsvf_pzErrorName[
-					 ( xsvfInfo.iErrorCode < XSVF_ERROR_LAST )
-					 ? xsvfInfo.iErrorCode : XSVF_ERROR_UNKNOWN ] );
-		XSVFDBG_PRINTF2( 0, "ERROR at or near XSVF command #%ld.  See line #%ld in the XSVF ASCII file.\n",
-				 xsvfInfo.lCommandCount, xsvfInfo.lCommandCount );
-	}
-	else
-	{
-		XSVFDBG_PRINTF( 0, "SUCCESS - Completed XSVF execution.\n" );
-	}
-
-	xsvfCleanup( &xsvfInfo );
-
-	return( XSVF_ERRORCODE(xsvfInfo.iErrorCode) );
-}
-
-
-/*****************************************************************************
- * Function:     do_cpld
- * Description:  main function.
- *               Specified here for creating stand-alone debug executable.
- *               Embedded users should call xsvfExecute() directly.
- * Parameters:   iArgc    - number of command-line arguments.
- *               ppzArgv  - array of ptrs to strings (command-line arguments).
- * Returns:      int      - Legacy return value:  1 = success; 0 = error.
- *****************************************************************************/
-int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int     iErrorCode;
-	unsigned long duration;
-	unsigned long long startClock, endClock;
-
-	if (argc == 2)
-		xsvfdata = (unsigned char *)simple_strtoul(argv[1], NULL, 16);
-	else {
-#ifdef CONFIG_SYS_XSVF_DEFAULT_ADDR
-		xsvfdata = (unsigned char *)CONFIG_SYS_XSVF_DEFAULT_ADDR;
-#else
-		printf("Usage:\ncpld %s\n", cmdtp->help);
-		return -1;
-#endif
-	}
-
-	iErrorCode          = XSVF_ERRORCODE( XSVF_ERROR_NONE );
-	xsvf_iDebugLevel    = 0;
-
-	printf("XSVF Player v%s, Xilinx, Inc.\n", XSVF_VERSION);
-	printf("Reading XSVF data @ %p\n", xsvfdata);
-
-	/* Initialize the I/O.  SetPort initializes I/O on first call */
-	setPort( TMS, 1 );
-
-	/* Execute the XSVF in the file */
-	startClock  = get_ticks();
-	iErrorCode  = xsvfExecute();
-	endClock    = get_ticks();
-	duration    = (unsigned long)(endClock - startClock);
-	printf("\nExecution Time = %d seconds\n", (int)(duration/get_tbclk()));
-
-	return( iErrorCode );
-}
-U_BOOT_CMD(
-	cpld,	2,	1,	do_cpld,
-	"program onboard CPLD",
-	"<xsvf-addr>"
-);
diff --git a/board/esd/common/xilinx_jtag/micro.h b/board/esd/common/xilinx_jtag/micro.h
deleted file mode 100644
index e9a7612..0000000
--- a/board/esd/common/xilinx_jtag/micro.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * (C) Copyright 2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*****************************************************************************
- * File:         micro.h
- * Description:  This header file contains the function prototype to the
- *               primary interface function for the XSVF player.
- * Usage:        FIRST - PORTS.C
- *               Customize the ports.c function implementations to establish
- *               the correct protocol for communicating with your JTAG ports
- *               (setPort() and readTDOBit()) and tune the waitTime() delay
- *               function.  Also, establish access to the XSVF data source
- *               in the readByte() function.
- *               FINALLY - Call xsvfExecute().
- *****************************************************************************/
-#ifndef XSVF_MICRO_H
-#define XSVF_MICRO_H
-
-/* Legacy error codes for xsvfExecute from original XSVF player v2.0 */
-#define XSVF_LEGACY_SUCCESS 1
-#define XSVF_LEGACY_ERROR   0
-
-/* 4.04 [NEW] Error codes for xsvfExecute. */
-/* Must #define XSVF_SUPPORT_ERRORCODES in micro.c to get these codes */
-#define XSVF_ERROR_NONE         0
-#define XSVF_ERROR_UNKNOWN      1
-#define XSVF_ERROR_TDOMISMATCH  2
-#define XSVF_ERROR_MAXRETRIES   3   /* TDO mismatch after max retries */
-#define XSVF_ERROR_ILLEGALCMD   4
-#define XSVF_ERROR_ILLEGALSTATE 5
-#define XSVF_ERROR_DATAOVERFLOW 6   /* Data > lenVal MAX_LEN buffer size*/
-/* Insert new errors here */
-#define XSVF_ERROR_LAST         7
-
-/*****************************************************************************
- * Function:     xsvfExecute
- * Description:  Process, interpret, and apply the XSVF commands.
- *               See port.c:readByte for source of XSVF data.
- * Parameters:   none.
- * Returns:      int - For error codes see above.
- *****************************************************************************/
-int xsvfExecute(void);
-
-#endif  /* XSVF_MICRO_H */
diff --git a/board/esd/common/xilinx_jtag/ports.c b/board/esd/common/xilinx_jtag/ports.c
deleted file mode 100644
index d79dbd1..0000000
--- a/board/esd/common/xilinx_jtag/ports.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*******************************************************/
-/* file: ports.c                                       */
-/* abstract:  This file contains the routines to       */
-/*            output values on the JTAG ports, to read */
-/*            the TDO bit, and to read a byte of data  */
-/*            from the prom                            */
-/*                                                     */
-/*******************************************************/
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#include "ports.h"
-
-static unsigned long output = 0;
-static int filepos = 0;
-static int oldstate = 0;
-static int newstate = 0;
-static int readptr = 0;
-
-extern const unsigned char *xsvfdata;
-
-/* if in debugging mode, then just set the variables */
-void setPort(short p,short val)
-{
-	if (p==TMS) {
-		if (val) {
-			output |= JTAG_TMS;
-		} else {
-			output &= ~JTAG_TMS;
-		}
-	}
-	if (p==TDI) {
-		if (val) {
-			output |= JTAG_TDI;
-		} else {
-			output &= ~JTAG_TDI;
-		}
-	}
-	if (p==TCK) {
-		if (val) {
-			output |= JTAG_TCK;
-		} else {
-			output &= ~JTAG_TCK;
-		}
-		out_be32((void *)GPIO0_OR, output);
-	}
-}
-
-
-/* toggle tck LH */
-void pulseClock(void)
-{
-	setPort(TCK,0);  /* set the TCK port to low  */
-	setPort(TCK,1);  /* set the TCK port to high */
-}
-
-
-/* read in a byte of data from the prom */
-void readByte(unsigned char *data)
-{
-	/* pretend reading using a file */
-	*data = xsvfdata[readptr++];
-	newstate = filepos++ >> 10;
-	if (newstate != oldstate) {
-		printf("%4d kB\r\r\r\r", newstate);
-		oldstate = newstate;
-	}
-}
-
-/* read the TDO bit from port */
-unsigned char readTDOBit(void)
-{
-	unsigned long inputs;
-
-	inputs = in_be32((void *)GPIO0_IR);
-	if (inputs & JTAG_TDO)
-		return 1;
-	else
-		return 0;
-}
-
-
-/* Wait at least the specified number of microsec.                           */
-/* Use a timer if possible; otherwise estimate the number of instructions    */
-/* necessary to be run based on the microcontroller speed.  For this example */
-/* we pulse the TCK port a number of times based on the processor speed.     */
-void waitTime(long microsec)
-{
-	udelay(microsec); /* esd */
-}
diff --git a/board/esd/common/xilinx_jtag/ports.h b/board/esd/common/xilinx_jtag/ports.h
deleted file mode 100644
index 8ee7de9..0000000
--- a/board/esd/common/xilinx_jtag/ports.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * (C) Copyright 2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*******************************************************/
-/* file: ports.h                                       */
-/* abstract:  This file contains extern declarations   */
-/*            for providing stimulus to the JTAG ports.*/
-/*******************************************************/
-
-#ifndef ports_dot_h
-#define ports_dot_h
-
-/* these constants are used to send the appropriate ports to setPort */
-/* they should be enumerated types, but some of the microcontroller  */
-/* compilers don't like enumerated types */
-#define TCK (short) 0
-#define TMS (short) 1
-#define TDI (short) 2
-
-/*
- * Use CONFIG_SYS_FPGA_xxx defines from board include file.
- */
-#define JTAG_TMS   CONFIG_SYS_FPGA_PRG     /* output */
-#define JTAG_TCK   CONFIG_SYS_FPGA_CLK     /* output */
-#define JTAG_TDI   CONFIG_SYS_FPGA_DATA    /* output */
-#define JTAG_TDO   CONFIG_SYS_FPGA_DONE    /* input */
-
-/* set the port "p" (TCK, TMS, or TDI) to val (0 or 1) */
-void setPort(short p, short val);
-
-/* read the TDO bit and store it in val */
-unsigned char readTDOBit(void);
-
-/* make clock go down->up->down*/
-void pulseClock(void);
-
-/* read the next byte of data from the xsvf file */
-void readByte(unsigned char *data);
-
-void waitTime(long microsec);
-
-#endif
diff --git a/board/esd/cpci2dp/Kconfig b/board/esd/cpci2dp/Kconfig
deleted file mode 100644
index 646e8ff..0000000
--- a/board/esd/cpci2dp/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CPCI2DP
-
-config SYS_BOARD
-	default "cpci2dp"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "CPCI2DP"
-
-endif
diff --git a/board/esd/cpci2dp/MAINTAINERS b/board/esd/cpci2dp/MAINTAINERS
deleted file mode 100644
index 660e185..0000000
--- a/board/esd/cpci2dp/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CPCI2DP BOARD
-M:	Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S:	Maintained
-F:	board/esd/cpci2dp/
-F:	include/configs/CPCI2DP.h
-F:	configs/CPCI2DP_defconfig
diff --git a/board/esd/cpci2dp/Makefile b/board/esd/cpci2dp/Makefile
deleted file mode 100644
index ce2c6dd..0000000
--- a/board/esd/cpci2dp/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= cpci2dp.o flash.o ../common/misc.o ../common/cmd_loadpci.o
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
deleted file mode 100644
index 336c551..0000000
--- a/board/esd/cpci2dp/cpci2dp.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * (C) Copyright 2005
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-#include <malloc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f (void)
-{
-	unsigned long CPC0_CR0Reg;
-
-	/*
-	 * Setup GPIO pins
-	 */
-	CPC0_CR0Reg = mfdcr(CPC0_CR0);
-	mtdcr(CPC0_CR0, CPC0_CR0Reg |
-	      ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED |
-		CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5));
-
-	/* set output pins to high */
-	out_be32((void *)GPIO0_OR,  CONFIG_SYS_EEPROM_WP);
-	/* setup for output (LED=off) */
-	out_be32((void *)GPIO0_TCR, CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED);
-
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) PB0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) PB1; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) unused
-	 */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);	/* set all to be non-critical*/
-	mtdcr(UIC0PR, 0xFFFFFF81);	/* set int polarities */
-
-	mtdcr(UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority*/
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	unsigned long CPC0_CR0Reg;
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/*
-	 * Select cts (and not dsr) on uart1
-	 */
-	CPC0_CR0Reg = mfdcr(CPC0_CR0);
-	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
-
-	return (0);
-}
-
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof(str));
-
-	puts ("Board: ");
-
-	if (i == -1) {
-		puts ("### No HW ID - assuming CPCI2DP");
-	} else {
-		puts(str);
-	}
-
-	printf(" (Ver 1.0)");
-
-	putc ('\n');
-
-	return 0;
-}
-
-#if defined(CONFIG_SYS_EEPROM_WREN)
-/* Input: <dev_addr>  I2C address of EEPROM device to enable.
- *	   <state>     -1: deliver current state
- *		       0: disable write
- *		       1: enable write
- *  Returns:	       -1: wrong device address
- *			0: dis-/en- able done
- *		     0/1: current state if <state> was -1.
- */
-int eeprom_write_enable (unsigned dev_addr, int state) {
-	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
-		return -1;
-	} else {
-		switch (state) {
-		case 1:
-			/* Enable write access, clear bit GPIO_SINT2. */
-			out_be32((void *)GPIO0_OR,
-				 in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
-			state = 0;
-			break;
-		case 0:
-			/* Disable write access, set bit GPIO_SINT2. */
-			out_be32((void *)GPIO0_OR,
-				 in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
-			state = 0;
-			break;
-		default:
-			/* Read current status back. */
-			state = (0 == (in_be32((void *)GPIO0_OR) &
-				       CONFIG_SYS_EEPROM_WP));
-			break;
-		}
-	}
-	return state;
-}
-#endif
-
-#if defined(CONFIG_SYS_EEPROM_WREN)
-int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int query = argc == 1;
-	int state = 0;
-
-	if (query) {
-		/* Query write access state. */
-		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
-		if (state < 0) {
-			puts ("Query of write access state failed.\n");
-		} else {
-			printf ("Write access for device 0x%0x is %sabled.\n",
-				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
-			state = 0;
-		}
-	} else {
-		if ('0' == argv[1][0]) {
-			/* Disable write access. */
-			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
-		} else {
-			/* Enable write access. */
-			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
-		}
-		if (state < 0) {
-			puts ("Setup of write access state failed.\n");
-		}
-	}
-
-	return state;
-}
-
-U_BOOT_CMD(
-	eepwren,	2,	0,	do_eep_wren,
-	"Enable / disable / query EEPROM write access",
-	""
-);
-#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/cpci2dp/flash.c b/board/esd/cpci2dp/flash.c
deleted file mode 100644
index 34bdc05..0000000
--- a/board/esd/cpci2dp/flash.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0;
-	int i;
-	uint pbcr;
-	unsigned long base_b0;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-	/* Setup offsets */
-	flash_get_offsets (-size_b0, &flash_info[0]);
-
-	/* Re-do sizing to get full correct info */
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	pbcr = mfdcr(EBC0_CFGDATA);
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	base_b0 = -size_b0;
-	pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-	mtdcr(EBC0_CFGDATA, pbcr);
-	/*          printf("PB1CR = %x\n", pbcr); */
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -monitor_flash_len,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	flash_info[0].size = size_b0;
-
-	return (size_b0);
-}
diff --git a/board/esd/cpci405/Kconfig b/board/esd/cpci405/Kconfig
deleted file mode 100644
index 0df2755..0000000
--- a/board/esd/cpci405/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CPCI4052
-
-config SYS_BOARD
-	default "cpci405"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "CPCI4052"
-
-endif
diff --git a/board/esd/cpci405/MAINTAINERS b/board/esd/cpci405/MAINTAINERS
deleted file mode 100644
index 1da58dc..0000000
--- a/board/esd/cpci405/MAINTAINERS
+++ /dev/null
@@ -1,12 +0,0 @@
-CPCI405 BOARD
-M:	Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S:	Maintained
-F:	board/esd/cpci405/
-F:	include/configs/CPCI405.h
-F:	configs/CPCI405_defconfig
-F:	include/configs/CPCI4052.h
-F:	configs/CPCI4052_defconfig
-F:	include/configs/CPCI405AB.h
-F:	configs/CPCI405AB_defconfig
-F:	include/configs/CPCI405DT.h
-F:	configs/CPCI405DT_defconfig
diff --git a/board/esd/cpci405/Makefile b/board/esd/cpci405/Makefile
deleted file mode 100644
index 7490b78..0000000
--- a/board/esd/cpci405/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= cpci405.o flash.o ../common/misc.o
-obj-y	+= ../common/cmd_loadpci.o
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
deleted file mode 100644
index c510ab1..0000000
--- a/board/esd/cpci405/cpci405.c
+++ /dev/null
@@ -1,496 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <console.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-#include <malloc.h>
-#include <net.h>
-#include <pci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void __ft_board_setup(void *blob, bd_t *bd);
-
-#undef FPGA_DEBUG
-
-/* fpga configuration data - generated by bin2cc */
-const unsigned char fpgadata[] =
-{
-#if defined(CONFIG_CPCI405_VER2)
-# include "fpgadata_cpci4052.c"
-#endif
-};
-
-/*
- * include common fpga code (for esd boards)
- */
-#include "../common/fpga.c"
-
-/* Prototypes */
-int cpci405_version(void);
-void lxt971_no_sleep(void);
-
-int board_early_init_f(void)
-{
-#ifndef CONFIG_CPCI405_VER2
-	int index, len, i;
-	int status;
-#endif
-
-#ifdef FPGA_DEBUG
-	/* set up serial port with default baudrate */
-	(void)get_clocks();
-	gd->baudrate = CONFIG_BAUDRATE;
-	serial_init();
-	console_init_f();
-#endif
-
-	/*
-	 * First pull fpga-prg pin low,
-	 * to disable fpga logic (on version 2 board)
-	 */
-	out_be32((void *)GPIO0_ODR, 0x00000000);	     /* no open drain pins	*/
-	out_be32((void *)GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output	*/
-	out_be32((void *)GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */
-	out_be32((void *)GPIO0_OR, 0);		     /* pull prg low		*/
-
-	/*
-	 * Boot onboard FPGA
-	 */
-#ifndef CONFIG_CPCI405_VER2
-	if (cpci405_version() == 1) {
-		status = fpga_boot((unsigned char *)fpgadata, sizeof(fpgadata));
-		if (status != 0) {
-			/* booting FPGA failed */
-#ifndef FPGA_DEBUG
-			/* set up serial port with default baudrate */
-			(void)get_clocks();
-			gd->baudrate = CONFIG_BAUDRATE;
-			serial_init();
-			console_init_f();
-#endif
-			printf("\nFPGA: Booting failed ");
-			switch (status) {
-			case ERROR_FPGA_PRG_INIT_LOW:
-				printf("(Timeout: INIT not low after "
-				       "asserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_INIT_HIGH:
-				printf("(Timeout: INIT not high after "
-				       "deasserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_DONE:
-				printf("(Timeout: DONE not high after "
-				       "programming FPGA)\n ");
-				break;
-			}
-
-			/* display infos on fpgaimage */
-			index = 15;
-			for (i = 0; i < 4; i++) {
-				len = fpgadata[index];
-				printf("FPGA: %s\n", &(fpgadata[index + 1]));
-				index += len + 3;
-			}
-			putc('\n');
-			/* delayed reboot */
-			for (i = 20; i > 0; i--) {
-				printf("Rebooting in %2d seconds \r",i);
-				for (index = 0; index < 1000; index++)
-					udelay(1000);
-			}
-			putc('\n');
-			do_reset(NULL, 0, 0, NULL);
-		}
-	}
-#endif /* !CONFIG_CPCI405_VER2 */
-
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) CAN1 (+FPGA on CPCI4052); active low; level sens.
-	 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);	/* set all to be non-critical*/
-#if defined(CONFIG_CPCI405_6U)
-	if (cpci405_version() == 3) {
-		mtdcr(UIC0PR, 0xFFFFFF99);	/* set int polarities */
-	} else {
-		mtdcr(UIC0PR, 0xFFFFFF81);	/* set int polarities */
-	}
-#else
-	mtdcr(UIC0PR, 0xFFFFFF81);	/* set int polarities */
-#endif
-	mtdcr(UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);	/* set vect base=0,
-					 * INT0 highest priority */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	return 0;
-}
-
-int ctermm2(void)
-{
-#if defined(CONFIG_CPCI405_VER2)
-	return 0;			/* no, board is cpci405 */
-#else
-	if ((in_8((void*)0xf0000400) == 0x00) &&
-	    (in_8((void*)0xf0000401) == 0x01))
-		return 0;		/* no, board is cpci405 */
-	else
-		return -1;		/* yes, board is cterm-m2 */
-#endif
-}
-
-int cpci405_host(void)
-{
-	if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
-		return -1;		/* yes, board is cpci405 host */
-	else
-		return 0;		/* no, board is cpci405 adapter */
-}
-
-int cpci405_version(void)
-{
-	unsigned long CPC0_CR0Reg;
-	unsigned long value;
-
-	/*
-	 * Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO)
-	 */
-	CPC0_CR0Reg = mfdcr(CPC0_CR0);
-	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03000000);
-	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000);
-	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000);
-	udelay(1000); /* wait some time before reading input */
-	value = in_be32((void*)GPIO0_IR) & 0x00180000; /* get config bits */
-
-	/*
-	 * Restore GPIO settings
-	 */
-	mtdcr(CPC0_CR0, CPC0_CR0Reg);
-
-	switch (value) {
-	case 0x00180000:
-		/* CS2==1 && CS3==1 -> version 1 */
-		return 1;
-	case 0x00080000:
-		/* CS2==0 && CS3==1 -> version 2 */
-		return 2;
-	case 0x00100000:
-		/* CS2==1 && CS3==0 -> version 3 or 6U board */
-		return 3;
-	case 0x00000000:
-		/* CS2==0 && CS3==0 -> version 4 */
-		return 4;
-	default:
-		/* should not be reached! */
-		return 2;
-	}
-}
-
-int misc_init_r (void)
-{
-	unsigned long CPC0_CR0Reg;
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-#if defined(CONFIG_CPCI405_VER2)
-	{
-	unsigned char *dst;
-	ulong len = sizeof(fpgadata);
-	int status;
-	int index;
-	int i;
-
-	/*
-	 * On CPCI-405 version 2 the environment is saved in eeprom!
-	 * FPGA can be gzip compressed (malloc) and booted this late.
-	 */
-	if (cpci405_version() >= 2) {
-		/*
-		 * Setup GPIO pins (CS6+CS7 as GPIO)
-		 */
-		CPC0_CR0Reg = mfdcr(CPC0_CR0);
-		mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
-
-		dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
-		if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE,
-			   (uchar *)fpgadata, &len) != 0) {
-			printf("GUNZIP ERROR - must RESET board to recover\n");
-			do_reset(NULL, 0, 0, NULL);
-		}
-
-		status = fpga_boot(dst, len);
-		if (status != 0) {
-			printf("\nFPGA: Booting failed ");
-			switch (status) {
-			case ERROR_FPGA_PRG_INIT_LOW:
-				printf("(Timeout: INIT not low after "
-				       "asserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_INIT_HIGH:
-				printf("(Timeout: INIT not high after "
-				       "deasserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_DONE:
-				printf("(Timeout: DONE not high after "
-				       "programming FPGA)\n ");
-				break;
-			}
-
-			/* display infos on fpgaimage */
-			index = 15;
-			for (i = 0; i < 4; i++) {
-				len = dst[index];
-				printf("FPGA: %s\n", &(dst[index + 1]));
-				index += len + 3;
-			}
-			putc('\n');
-			/* delayed reboot */
-			for (i = 20; i > 0; i--) {
-				printf("Rebooting in %2d seconds \r", i);
-				for (index = 0; index < 1000; index++)
-					udelay(1000);
-			}
-			putc('\n');
-			do_reset(NULL, 0, 0, NULL);
-		}
-
-		/* restore gpio/cs settings */
-		mtdcr(CPC0_CR0, CPC0_CR0Reg);
-
-		puts("FPGA:  ");
-
-		/* display infos on fpgaimage */
-		index = 15;
-		for (i = 0; i < 4; i++) {
-			len = dst[index];
-			printf("%s ", &(dst[index + 1]));
-			index += len + 3;
-		}
-		putc('\n');
-
-		free(dst);
-
-		/*
-		 * Reset FPGA via FPGA_DATA pin
-		 */
-		SET_FPGA(FPGA_PRG | FPGA_CLK);
-		udelay(1000); /* wait 1ms */
-		SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
-		udelay(1000); /* wait 1ms */
-
-#if defined(CONFIG_CPCI405_6U)
-#error HIER GETH ES WEITER MIT IO ACCESSORS
-		if (cpci405_version() == 3) {
-			/*
-			 * Enable outputs in fpga on version 3 board
-			 */
-			out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
-				 in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) |
-				 CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT);
-
-			/*
-			 * Set outputs to 0
-			 */
-			out_8((void*)CONFIG_SYS_LED_ADDR, 0x00);
-
-			/*
-			 * Reset external DUART
-			 */
-			out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
-				 in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) |
-				 CONFIG_SYS_FPGA_MODE_DUART_RESET);
-			udelay(100);
-			out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
-				 in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) &
-				 ~CONFIG_SYS_FPGA_MODE_DUART_RESET);
-		}
-#endif
-	}
-	else {
-		puts("\n*** U-Boot Version does not match Board Version!\n");
-		puts("*** CPCI-405 Version 1.x detected!\n");
-		puts("*** Please use correct U-Boot version "
-		     "(CPCI405 instead of CPCI4052)!\n\n");
-	}
-	}
-#else /* CONFIG_CPCI405_VER2 */
-	if (cpci405_version() >= 2) {
-		puts("\n*** U-Boot Version does not match Board Version!\n");
-		puts("*** CPCI-405 Board Version 2.x detected!\n");
-		puts("*** Please use correct U-Boot version "
-		     "(CPCI4052 instead of CPCI405)!\n\n");
-	}
-#endif /* CONFIG_CPCI405_VER2 */
-
-	/*
-	 * Select cts (and not dsr) on uart1
-	 */
-	CPC0_CR0Reg = mfdcr(CPC0_CR0);
-	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-
-int checkboard(void)
-{
-#ifndef CONFIG_CPCI405_VER2
-	int index;
-	int len;
-#endif
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof(str));
-	unsigned short ver;
-
-	puts("Board: ");
-
-	if (i == -1)
-		puts("### No HW ID - assuming CPCI405");
-	else
-		puts(str);
-
-	ver = cpci405_version();
-	printf(" (Ver %d.x, ", ver);
-
-	if (ctermm2()) {
-		char str[4];
-
-		/*
-		 * Read board-id and save in env-variable
-		 */
-		sprintf(str, "%d", *(unsigned char *)0xf0000400);
-		setenv("boardid", str);
-		printf("CTERM-M2 - Id=%s)", str);
-	} else {
-		if (cpci405_host())
-			puts("PCI Host Version)");
-		else
-			puts("PCI Adapter Version)");
-	}
-
-#ifndef CONFIG_CPCI405_VER2
-	puts("\nFPGA:	");
-
-	/* display infos on fpgaimage */
-	index = 15;
-	for (i = 0; i < 4; i++) {
-		len = fpgadata[index];
-		printf("%s ", &(fpgadata[index + 1]));
-		index += len + 3;
-	}
-#endif
-
-	putc('\n');
-	return 0;
-}
-
-void reset_phy(void)
-{
-#if defined(CONFIG_LXT971_NO_SLEEP)
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-#endif
-}
-
-#if defined(CONFIG_CPCI405_VER2) && defined (CONFIG_IDE_RESET)
-void ide_set_reset(int on)
-{
-	/*
-	 * Assert or deassert CompactFlash Reset Pin
-	 */
-	if (on) {	/* assert RESET */
-		out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
-			 in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) &
-			 ~CONFIG_SYS_FPGA_MODE_CF_RESET);
-	} else {	/* release RESET */
-		out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
-			 in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) |
-			 CONFIG_SYS_FPGA_MODE_CF_RESET);
-	}
-}
-
-#endif /* CONFIG_IDE_RESET && CONFIG_CPCI405_VER2 */
-
-#if defined(CONFIG_PCI)
-void cpci405_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
-	unsigned char int_line = 0xff;
-
-	/*
-	 * Write pci interrupt line register (cpci405 specific)
-	 */
-	switch (PCI_DEV(dev) & 0x03) {
-	case 0:
-		int_line = 27 + 2;
-		break;
-	case 1:
-		int_line = 27 + 3;
-		break;
-	case 2:
-		int_line = 27 + 0;
-		break;
-	case 3:
-		int_line = 27 + 1;
-		break;
-	}
-
-	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
-}
-
-int pci_pre_init(struct pci_controller *hose)
-{
-	hose->fixup_irq = cpci405_pci_fixup_irq;
-	return 1;
-}
-#endif /* defined(CONFIG_PCI) */
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	int rc;
-
-	__ft_board_setup(blob, bd);
-
-	/*
-	 * Disable PCI in adapter mode.
-	 */
-	if (!cpci405_host()) {
-		rc = fdt_find_and_setprop(blob, "/plb/pci@ec000000", "status",
-					  "disabled", sizeof("disabled"), 1);
-		if (rc) {
-			printf("Unable to update property status in PCI node, "
-			       "err=%s\n",
-			       fdt_strerror(rc));
-		}
-	}
-
-	return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/esd/cpci405/flash.c b/board/esd/cpci405/flash.c
deleted file mode 100644
index 091652b..0000000
--- a/board/esd/cpci405/flash.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long calc_size(unsigned long size)
-{
-	switch (size) {
-	case 1 << 20:
-		return 0;
-	case 2 << 20:
-		return 1;
-	case 4 << 20:
-		return 2;
-	case 8 << 20:
-		return 3;
-	case 16 << 20:
-		return 4;
-	default:
-		return 0;
-	}
-}
-
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0, size_b1;
-	int i;
-	uint pbcr;
-	unsigned long base_b0, base_b1;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	base_b0 = FLASH_BASE0_PRELIM;
-	size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-				size_b0, size_b0 << 20);
-	}
-
-	base_b1 = FLASH_BASE1_PRELIM;
-	size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
-
-	/* Re-do sizing to get full correct info */
-
-	if (size_b1) {
-		if (size_b1 < (1 << 20)) {
-			/* minimum CS size on PPC405GP is 1MB !!! */
-			size_b1 = 1 << 20;
-		}
-		base_b1 = -size_b1;
-		mtdcr (EBC0_CFGADDR, PB0CR);
-		pbcr = mfdcr (EBC0_CFGDATA);
-		mtdcr (EBC0_CFGADDR, PB0CR);
-		pbcr = (pbcr & 0x0001ffff) | base_b1 | (calc_size(size_b1) << 17);
-		mtdcr (EBC0_CFGDATA, pbcr);
-#if 0 /* test-only */
-		printf("size_b1=%x base_b1=%x PB1CR = %x\n",
-		       size_b1, base_b1, pbcr); /* test-only */
-#endif
-	}
-
-	if (size_b0) {
-		if (size_b0 < (1 << 20)) {
-			/* minimum CS size on PPC405GP is 1MB !!! */
-			size_b0 = 1 << 20;
-		}
-		base_b0 = base_b1 - size_b0;
-		mtdcr (EBC0_CFGADDR, PB1CR);
-		pbcr = mfdcr (EBC0_CFGDATA);
-		mtdcr (EBC0_CFGADDR, PB1CR);
-		pbcr = (pbcr & 0x0001ffff) | base_b0 | (calc_size(size_b0) << 17);
-		mtdcr (EBC0_CFGDATA, pbcr);
-#if 0 /* test-only */
-		printf("size_b0=%x base_b0=%x PB0CR = %x\n",
-		       size_b0, base_b0, pbcr); /* test-only */
-#endif
-	}
-
-	size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
-
-	flash_get_offsets (base_b0, &flash_info[0]);
-
-	/* monitor protection ON by default */
-	flash_protect (FLAG_PROTECT_SET,
-			base_b0 + size_b0 - monitor_flash_len,
-			base_b0 + size_b0 - 1, &flash_info[0]);
-
-	if (size_b1) {
-		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
-
-		flash_get_offsets (base_b1, &flash_info[1]);
-
-		/* monitor protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-				base_b1 + size_b1 - monitor_flash_len,
-				base_b1 + size_b1 - 1, &flash_info[1]);
-		/* monitor protection OFF by default (one is enough) */
-		flash_protect (FLAG_PROTECT_CLEAR,
-				base_b0 + size_b0 - monitor_flash_len,
-				base_b0 + size_b0 - 1, &flash_info[0]);
-	} else {
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-	}
-
-	flash_info[0].size = size_b0;
-	flash_info[1].size = size_b1;
-
-	return (size_b0 + size_b1);
-}
diff --git a/board/esd/cpci405/fpgadata_cpci4052.c b/board/esd/cpci405/fpgadata_cpci4052.c
deleted file mode 100644
index bedbb1f..0000000
--- a/board/esd/cpci405/fpgadata_cpci4052.c
+++ /dev/null
@@ -1,1529 +0,0 @@
-0x1f, 0x8b, 0x08, 0x08, 0xe9, 0xf4, 0x75, 0x3e,
-0x00, 0x03, 0x63, 0x70, 0x63, 0x69, 0x34, 0x30,
-0x35, 0x5f, 0x32, 0x5f, 0x30, 0x34, 0x2e, 0x62,
-0x69, 0x74, 0x00, 0xed, 0x7c, 0x0f, 0x74, 0x14,
-0xd7, 0x79, 0xef, 0x37, 0x77, 0x66, 0xc5, 0x68,
-0x77, 0xa5, 0x1d, 0xad, 0x56, 0xce, 0xda, 0x16,
-0xf2, 0x68, 0x25, 0xc8, 0xa2, 0xae, 0xc4, 0xb2,
-0xc2, 0x58, 0x96, 0xc5, 0x6a, 0xb4, 0x92, 0xe9,
-0xda, 0xe0, 0xb0, 0x26, 0x6e, 0xc3, 0x6b, 0xfd,
-0x92, 0xc5, 0x26, 0xad, 0xfa, 0x0e, 0x71, 0x85,
-0xd3, 0xe6, 0xa9, 0x6e, 0x5f, 0xdf, 0xd5, 0x6a,
-0x31, 0x02, 0x61, 0x58, 0xff, 0x69, 0xa3, 0xb8,
-0x24, 0x59, 0x88, 0xda, 0x28, 0x2e, 0xc9, 0x5b,
-0x04, 0x01, 0x61, 0x1c, 0x7b, 0x50, 0x65, 0x2c,
-0x40, 0x06, 0x85, 0xfa, 0xbc, 0x87, 0x6d, 0x6a,
-0x2f, 0x8e, 0xea, 0xa7, 0x60, 0x99, 0xca, 0x40,
-0x1d, 0xf1, 0xcf, 0x7a, 0xdf, 0x9d, 0x7f, 0xbb,
-0x22, 0x89, 0xdb, 0xd3, 0xd7, 0x73, 0xfa, 0xce,
-0x79, 0x9e, 0xc4, 0xc7, 0xd7, 0xba, 0xba, 0x33,
-0xf7, 0x7e, 0xf3, 0xdd, 0xdf, 0xf7, 0xfb, 0x7d,
-0xdf, 0x1d, 0x41, 0xa1, 0x6b, 0x5a, 0xff, 0x1f,
-0x00, 0xb7, 0x0e, 0x4a, 0x1e, 0xed, 0x78, 0xf4,
-0x0f, 0x96, 0x06, 0xef, 0xfc, 0x4a, 0xe8, 0x2b,
-0xc1, 0xa5, 0x75, 0x8f, 0x3d, 0xba, 0x1e, 0x1e,
-0x01, 0x7b, 0xe8, 0xeb, 0x4b, 0xee, 0xfc, 0xa3,
-0x8d, 0x4b, 0x96, 0x2e, 0x85, 0x47, 0xc1, 0x11,
-0x0a, 0x06, 0xeb, 0x17, 0xe3, 0xff, 0x97, 0xdc,
-0x05, 0xeb, 0xa1, 0x70, 0xc9, 0x5d, 0x8d, 0x4b,
-0x96, 0x35, 0x2e, 0x0d, 0xc2, 0x57, 0x01, 0xe2,
-0x3d, 0xb3, 0x78, 0xbd, 0xf0, 0xad, 0xdf, 0xfa,
-0xbd, 0x20, 0x50, 0x0e, 0x00, 0xe6, 0x05, 0xb9,
-0x38, 0xfb, 0x77, 0x41, 0x90, 0x93, 0x39, 0xa0,
-0xcd, 0xb5, 0x41, 0x50, 0xd9, 0x7f, 0x83, 0xd1,
-0x5f, 0x18, 0x04, 0x39, 0xff, 0xbf, 0xb9, 0x20,
-0x28, 0x10, 0x03, 0xcf, 0xd7, 0xc0, 0x1d, 0x84,
-0x9b, 0x2e, 0x0e, 0x04, 0xaa, 0xb7, 0x3e, 0xad,
-0x8f, 0xdc, 0xdc, 0xc5, 0xae, 0x7f, 0x45, 0x9f,
-0xfb, 0x57, 0x74, 0x09, 0xff, 0xd6, 0x3e, 0xfd,
-0x5f, 0xb3, 0x6e, 0xf0, 0xe0, 0xcc, 0x38, 0x6d,
-0x45, 0x60, 0x63, 0x0d, 0xa9, 0x79, 0x44, 0x1f,
-0xa7, 0xda, 0x2e, 0xc1, 0x58, 0x72, 0x99, 0xbc,
-0x6a, 0x0b, 0xa9, 0x22, 0x63, 0xea, 0x37, 0x82,
-0xae, 0x3e, 0x3e, 0x08, 0x1d, 0xfa, 0x8c, 0xa4,
-0xf7, 0x68, 0xcf, 0x80, 0xcf, 0x27, 0x8a, 0xa4,
-0x1a, 0x7a, 0x40, 0xa6, 0x8e, 0xe7, 0x13, 0x69,
-0xd0, 0xd7, 0xdc, 0x63, 0x9b, 0xa4, 0xbb, 0x64,
-0x19, 0x44, 0x72, 0x9b, 0xd8, 0xd5, 0x93, 0x96,
-0xa3, 0x0e, 0x42, 0x7c, 0x9c, 0x3e, 0x4e, 0x2d,
-0x19, 0x20, 0x3f, 0x00, 0xec, 0x03, 0xe2, 0xe4,
-0x7a, 0x38, 0x9f, 0xea, 0xa0, 0x24, 0x23, 0xc4,
-0xf5, 0xc9, 0x94, 0xa9, 0x70, 0x1e, 0x0e, 0xa8,
-0x81, 0xdd, 0xbc, 0x0c, 0xc3, 0x64, 0x19, 0xb8,
-0x32, 0xbc, 0x24, 0xe8, 0xe3, 0xb2, 0x5c, 0x1a,
-0xde, 0x81, 0x57, 0x54, 0x57, 0x96, 0xbf, 0x0c,
-0x7f, 0x0e, 0x77, 0x50, 0xd7, 0x34, 0x3f, 0x03,
-0xfa, 0x38, 0x45, 0x1a, 0x80, 0x13, 0x10, 0xca,
-0x16, 0x0d, 0xf0, 0x7e, 0xbc, 0x41, 0x48, 0x71,
-0xa6, 0x71, 0x9c, 0xac, 0xf5, 0x8d, 0xda, 0xfc,
-0xf0, 0x1b, 0x31, 0x5f, 0x56, 0x1c, 0x20, 0x01,
-0x38, 0x2f, 0xf8, 0x54, 0x31, 0xcd, 0x3f, 0x8e,
-0xef, 0x4f, 0xbb, 0xa7, 0xad, 0x0d, 0x7a, 0x14,
-0x19, 0x0a, 0x25, 0x02, 0xb6, 0x5d, 0xd0, 0xce,
-0x89, 0x29, 0x32, 0x84, 0x76, 0x60, 0x97, 0xcc,
-0x2d, 0xa3, 0x7b, 0xd2, 0x95, 0xd5, 0xe2, 0xef,
-0x92, 0x5b, 0x1e, 0xfa, 0x21, 0xad, 0x4c, 0x8b,
-0x6b, 0xc9, 0x5a, 0x63, 0x5c, 0x34, 0xea, 0x4a,
-0x1d, 0x49, 0xef, 0x5e, 0x54, 0x74, 0x9b, 0xc3,
-0x4e, 0xcf, 0xa5, 0x83, 0x71, 0x67, 0x0f, 0x6f,
-0x9a, 0x58, 0x99, 0xbf, 0x47, 0xf9, 0x67, 0x29,
-0x0c, 0xae, 0xf1, 0xd6, 0xeb, 0xb0, 0x44, 0x6a,
-0x3e, 0xb6, 0x78, 0xb4, 0x7e, 0xbc, 0x40, 0x9f,
-0xe7, 0x80, 0x6d, 0x02, 0x8e, 0xc3, 0x8b, 0xaa,
-0x33, 0xc3, 0xfb, 0xe0, 0x44, 0x32, 0x24, 0x07,
-0x32, 0x55, 0x35, 0x86, 0x3d, 0xa3, 0x25, 0xcf,
-0x09, 0x4f, 0x42, 0xa5, 0x2a, 0x4e, 0x47, 0x96,
-0xc2, 0x66, 0xa8, 0xa2, 0xe2, 0x34, 0x71, 0x1b,
-0x76, 0x51, 0xe1, 0x3b, 0xf0, 0x4d, 0xba, 0x28,
-0xdb, 0xde, 0x59, 0xf0, 0xbc, 0x63, 0x33, 0xad,
-0x8c, 0x17, 0xb6, 0x93, 0x0e, 0xd0, 0xd7, 0x17,
-0xf5, 0x4c, 0x91, 0xc3, 0xd4, 0x77, 0x56, 0xbc,
-0xbb, 0xc0, 0x09, 0xdd, 0x20, 0xab, 0x85, 0x7e,
-0xfb, 0x1a, 0x41, 0x7f, 0x0f, 0x93, 0x65, 0x93,
-0xf0, 0xd6, 0xae, 0xc6, 0xcc, 0xb6, 0xf4, 0x3c,
-0xbf, 0x70, 0x9c, 0x84, 0x68, 0xd1, 0x0b, 0xfc,
-0x13, 0xc6, 0x3d, 0xa3, 0x90, 0x26, 0x3d, 0x80,
-0xf3, 0xa4, 0x8e, 0x2c, 0xcc, 0x60, 0xa3, 0x58,
-0xe5, 0x9f, 0x31, 0xde, 0x9f, 0x28, 0x4d, 0x90,
-0x63, 0x74, 0x50, 0x81, 0x14, 0x59, 0x0f, 0x3f,
-0x87, 0x70, 0xcb, 0xbc, 0xa7, 0x79, 0x62, 0xdc,
-0x93, 0x0a, 0xeb, 0x61, 0x0b, 0xec, 0x8e, 0x89,
-0xcf, 0xe1, 0x7b, 0x3f, 0x24, 0xd4, 0x29, 0x8e,
-0x9d, 0x44, 0x06, 0x49, 0xeb, 0xf3, 0xda, 0x96,
-0x92, 0xa7, 0xe4, 0x2a, 0xc5, 0x1e, 0xb3, 0xef,
-0x17, 0x7f, 0x02, 0x8b, 0x15, 0x47, 0xac, 0xa0,
-0xc0, 0xb0, 0x99, 0x28, 0x78, 0x60, 0x13, 0x54,
-0xc6, 0xed, 0x6b, 0x89, 0x07, 0x7e, 0x0c, 0xb5,
-0xca, 0xed, 0x6b, 0x09, 0xe1, 0x74, 0x9b, 0x0d,
-0x15, 0x1d, 0x51, 0xd4, 0x35, 0x41, 0x4f, 0xdd,
-0x26, 0x7e, 0x57, 0x5b, 0x76, 0x4d, 0xd8, 0xe3,
-0x7a, 0xd5, 0x51, 0xc7, 0xeb, 0x76, 0xe9, 0x9b,
-0x3f, 0x51, 0x70, 0x05, 0xc2, 0x4a, 0x51, 0x6a,
-0xe5, 0x7a, 0x60, 0x8d, 0x95, 0x29, 0xfe, 0xfd,
-0x82, 0x0e, 0xe3, 0x79, 0x97, 0xe1, 0x86, 0x50,
-0xaf, 0xdc, 0x31, 0xce, 0x57, 0xc3, 0x35, 0x21,
-0xac, 0xb8, 0xc6, 0xf9, 0x85, 0x86, 0x3d, 0x1b,
-0xa4, 0x6c, 0x72, 0x08, 0x88, 0x28, 0x26, 0x88,
-0x4c, 0x87, 0xe4, 0x3a, 0xd1, 0xb1, 0x9b, 0x6c,
-0x37, 0xd6, 0x20, 0xda, 0x46, 0xe4, 0xbd, 0x7e,
-0x39, 0x62, 0x97, 0x12, 0x82, 0xbc, 0x57, 0x0c,
-0x3c, 0xe2, 0x90, 0x12, 0xc4, 0xf0, 0x4f, 0x6f,
-0x59, 0xbf, 0x77, 0xaf, 0x22, 0x2b, 0xd1, 0x4c,
-0xc1, 0x42, 0xe9, 0x10, 0x14, 0x2b, 0x0e, 0x89,
-0x3c, 0x69, 0xd8, 0x2c, 0x2d, 0xf5, 0xe3, 0x14,
-0x7c, 0x8a, 0x2b, 0xe5, 0xa8, 0x16, 0xaf, 0x10,
-0x7c, 0xde, 0x73, 0xbc, 0xdf, 0xf0, 0x33, 0x3f,
-0xfc, 0x8d, 0x72, 0x05, 0x5e, 0x56, 0xe6, 0xa5,
-0xf8, 0x09, 0x6d, 0x9e, 0xae, 0x14, 0x7f, 0xdc,
-0x78, 0x47, 0x7e, 0x29, 0x1d, 0x1f, 0x85, 0x10,
-0xda, 0x9a, 0x4f, 0xa3, 0xad, 0xb1, 0x91, 0x74,
-0xd8, 0xcd, 0x71, 0xc2, 0xdd, 0xb0, 0x1d, 0xaa,
-0xba, 0xc4, 0x2c, 0xfa, 0xee, 0x8b, 0x9c, 0x8f,
-0xae, 0xcc, 0x46, 0xec, 0x86, 0x2f, 0xf9, 0x6d,
-0x5f, 0xe0, 0xba, 0x21, 0xad, 0x8a, 0x19, 0xb2,
-0x0d, 0xf6, 0x81, 0x5f, 0xc5, 0xb9, 0xd8, 0x2d,
-0xff, 0x0c, 0x73, 0xe8, 0x2f, 0x8a, 0x18, 0x73,
-0x97, 0xf7, 0x1c, 0x4c, 0x2f, 0x1a, 0xbd, 0x3d,
-0x46, 0x44, 0xc3, 0xd6, 0x7e, 0xb1, 0x02, 0x4e,
-0xd1, 0xfa, 0x74, 0xf1, 0x24, 0xff, 0x5d, 0x3a,
-0x9b, 0xbe, 0x7b, 0xe6, 0x2b, 0x93, 0xa5, 0x76,
-0x03, 0x57, 0xc4, 0xf9, 0xdb, 0x4a, 0xaf, 0xe2,
-0xeb, 0x7e, 0x99, 0xf2, 0x53, 0x70, 0x4f, 0x6c,
-0xd9, 0xb0, 0x2b, 0xcd, 0x0f, 0x1b, 0xfe, 0xa9,
-0xd8, 0x3e, 0x81, 0x13, 0xa9, 0xaf, 0x4f, 0x3a,
-0x0f, 0xb9, 0x4f, 0xc1, 0xa9, 0x9f, 0x86, 0x27,
-0x9c, 0x7d, 0xfc, 0xb8, 0x61, 0xcf, 0x81, 0x92,
-0xff, 0x41, 0x13, 0xe9, 0xaa, 0xf5, 0xb8, 0x0d,
-0x2a, 0x68, 0x37, 0xad, 0xcd, 0x62, 0xe3, 0xbc,
-0xb9, 0x6f, 0x61, 0xe7, 0xf0, 0x0e, 0xa9, 0x92,
-0x16, 0x3e, 0xe2, 0x5b, 0xde, 0xb3, 0x19, 0x16,
-0x8f, 0xae, 0x5d, 0x4f, 0x46, 0xa8, 0xbe, 0xbe,
-0xb8, 0x67, 0xcc, 0x9d, 0x40, 0x3b, 0x14, 0x52,
-0xe2, 0x14, 0xba, 0x21, 0xa0, 0x8a, 0x7e, 0x72,
-0x26, 0xa9, 0xbf, 0x87, 0x81, 0xb2, 0x34, 0x1c,
-0x83, 0x41, 0xf5, 0x81, 0x0c, 0xff, 0x67, 0xde,
-0x53, 0x64, 0x39, 0xdb, 0x18, 0x17, 0x92, 0xfa,
-0x3d, 0x29, 0x9c, 0x83, 0x2b, 0x4a, 0x78, 0xbc,
-0x78, 0xbf, 0x63, 0x0a, 0xde, 0x86, 0x70, 0xd6,
-0xb5, 0xb7, 0x34, 0x6b, 0xf8, 0x27, 0x17, 0xbb,
-0x24, 0x9d, 0xa2, 0xfb, 0xb2, 0xab, 0x2e, 0xb6,
-0x36, 0x09, 0xa7, 0xa0, 0x59, 0x15, 0x66, 0xf8,
-0x89, 0x36, 0xbd, 0xaf, 0x4b, 0x58, 0x07, 0xbd,
-0x3d, 0xbe, 0xa3, 0xfe, 0x21, 0xe2, 0x84, 0x5e,
-0xa8, 0x3b, 0x12, 0xdd, 0x9f, 0xc8, 0x2a, 0xba,
-0x7f, 0x52, 0xdb, 0x2a, 0xe8, 0x5a, 0x20, 0xab,
-0x7d, 0x19, 0x7b, 0x80, 0xf5, 0xa9, 0xf6, 0x41,
-0x92, 0x35, 0xec, 0x29, 0x0a, 0x45, 0x72, 0xd7,
-0x7a, 0x79, 0x54, 0x0c, 0x92, 0x5a, 0xb9, 0x5b,
-0xae, 0x3b, 0xb3, 0x35, 0x44, 0x86, 0x8d, 0xd5,
-0x41, 0xe1, 0xd7, 0xe0, 0x44, 0x74, 0xf0, 0x2d,
-0xe7, 0x32, 0x7e, 0xb9, 0x70, 0x6a, 0x7d, 0xf3,
-0x78, 0xf1, 0x81, 0xee, 0x2c, 0xd1, 0xef, 0x99,
-0x9e, 0x3f, 0x95, 0xf8, 0x85, 0x5c, 0x71, 0xdc,
-0xf5, 0xf1, 0xf7, 0xae, 0xd3, 0x6b, 0x4d, 0xcb,
-0xcf, 0x14, 0x5d, 0xec, 0x9e, 0x34, 0xfc, 0x53,
-0xb5, 0x4d, 0x29, 0xef, 0x76, 0x85, 0xcf, 0xb9,
-0x2e, 0x95, 0x7e, 0xa2, 0x5c, 0xa3, 0xf5, 0xd9,
-0x3b, 0x66, 0xf8, 0x69, 0x0b, 0x3f, 0x6f, 0x24,
-0x0f, 0x27, 0xea, 0xb2, 0x2b, 0xbf, 0x4e, 0xc6,
-0xe8, 0xe1, 0x17, 0x7c, 0x59, 0xc7, 0x10, 0xc9,
-0x0a, 0x26, 0x7e, 0x8e, 0x29, 0xfb, 0xd0, 0x54,
-0x8e, 0x20, 0xf6, 0xed, 0x13, 0xd2, 0xac, 0xf1,
-0x9e, 0x89, 0x9f, 0x65, 0x7b, 0xe0, 0x30, 0x4e,
-0x7d, 0x65, 0x86, 0x4c, 0xc1, 0x3e, 0xc4, 0x4f,
-0x6c, 0x4c, 0x1b, 0xef, 0x41, 0x29, 0x9b, 0x92,
-0xd0, 0x54, 0xea, 0xea, 0x0c, 0x37, 0x05, 0xd7,
-0x20, 0x84, 0x7d, 0xad, 0xe3, 0x16, 0x7e, 0xbe,
-0x04, 0xaf, 0xa0, 0xa9, 0x5c, 0xd3, 0x55, 0xd7,
-0x61, 0x56, 0x6b, 0xe4, 0xe1, 0xe7, 0x1e, 0xee,
-0x03, 0x1c, 0xe7, 0xcc, 0x94, 0x4e, 0x91, 0x13,
-0xd8, 0xa8, 0xcb, 0xf0, 0xe3, 0x46, 0x7c, 0x18,
-0xb5, 0x35, 0x31, 0x53, 0x4d, 0xd8, 0xa7, 0x49,
-0x40, 0xc4, 0xc6, 0x2f, 0x8a, 0x32, 0xe4, 0xa2,
-0x85, 0x9f, 0xab, 0xe0, 0x7b, 0x10, 0xc8, 0x16,
-0x06, 0xc9, 0x2a, 0x78, 0x56, 0x0e, 0xa8, 0xde,
-0x20, 0x99, 0xb1, 0xfc, 0xb3, 0xa2, 0x67, 0x73,
-0xa2, 0x36, 0xeb, 0xf8, 0x13, 0x52, 0x01, 0xdf,
-0x4c, 0xd5, 0x66, 0xb9, 0x4e, 0x32, 0x6a, 0xe2,
-0xa7, 0x58, 0x07, 0xdf, 0xa3, 0x4d, 0xef, 0x15,
-0x35, 0x96, 0x7e, 0x61, 0xfc, 0xef, 0xd3, 0x4d,
-0x53, 0xce, 0x7b, 0xf8, 0xd3, 0x86, 0x7f, 0x2a,
-0xf3, 0x7f, 0x08, 0xd7, 0xa4, 0x26, 0xf5, 0x64,
-0x86, 0xdf, 0x00, 0x1f, 0x40, 0x93, 0x8a, 0x31,
-0x20, 0x87, 0x9f, 0x17, 0x12, 0x27, 0x84, 0xb0,
-0xfa, 0xc0, 0x8b, 0x2b, 0x03, 0xda, 0xfa, 0xb0,
-0xef, 0xbc, 0x85, 0x9f, 0x4f, 0x51, 0x74, 0x3d,
-0x55, 0xbc, 0x9c, 0x28, 0x87, 0x83, 0xb0, 0x48,
-0x75, 0x74, 0x90, 0xd3, 0x39, 0xfc, 0xa4, 0x9b,
-0xe9, 0xe2, 0x6c, 0xe1, 0x13, 0x91, 0x0a, 0x38,
-0x48, 0x2b, 0xb3, 0x8e, 0x4e, 0x32, 0x6d, 0xbc,
-0xda, 0xa8, 0x67, 0x0c, 0x61, 0x33, 0x70, 0x24,
-0x1a, 0x8c, 0x38, 0xd1, 0xb0, 0x7e, 0x66, 0xeb,
-0xd3, 0x16, 0x7e, 0x0e, 0x20, 0x5e, 0x87, 0x69,
-0x51, 0x1a, 0xf7, 0xe6, 0x55, 0xf0, 0x51, 0xdc,
-0x2b, 0x57, 0x2d, 0xfc, 0xd4, 0x61, 0x13, 0xf7,
-0xb4, 0xd6, 0x90, 0x5c, 0xb4, 0xf4, 0x74, 0x0e,
-0x3f, 0xe1, 0x0a, 0x1f, 0x56, 0x8a, 0x75, 0x2c,
-0x08, 0xad, 0x47, 0x2c, 0x18, 0xce, 0xc3, 0xcf,
-0x43, 0x5c, 0xa0, 0x03, 0x43, 0xcd, 0x04, 0x1c,
-0x82, 0xdd, 0x8a, 0x23, 0x85, 0x3e, 0x68, 0xe2,
-0x27, 0x42, 0x2a, 0xd4, 0xad, 0xb5, 0xeb, 0x7d,
-0x3e, 0xd6, 0x77, 0xd4, 0xc2, 0x4f, 0x81, 0x2e,
-0x11, 0x02, 0x8a, 0xe8, 0x26, 0x23, 0xb0, 0x17,
-0x71, 0x1e, 0xb1, 0x60, 0xd8, 0xc2, 0xcf, 0x75,
-0x4a, 0x27, 0xce, 0x65, 0xfb, 0x26, 0xfe, 0x9c,
-0x32, 0x1d, 0x63, 0x40, 0xf3, 0xe8, 0x05, 0x5e,
-0x7f, 0x0f, 0x88, 0x9f, 0xca, 0x15, 0x06, 0x8d,
-0x4f, 0xb3, 0xb9, 0xcc, 0x0b, 0x33, 0x80, 0xca,
-0xe1, 0xe7, 0x84, 0x7c, 0x0c, 0x9a, 0x95, 0xd5,
-0xa9, 0xee, 0x09, 0xb8, 0xa1, 0xd4, 0x2b, 0xce,
-0x14, 0x7f, 0xd4, 0xc2, 0xcf, 0x73, 0x89, 0x1e,
-0x52, 0x07, 0x7c, 0x32, 0x92, 0x45, 0xfc, 0xac,
-0x01, 0x91, 0x92, 0x93, 0x79, 0xf8, 0xd9, 0x05,
-0x7e, 0xc5, 0xe1, 0x4e, 0x20, 0x90, 0x82, 0xac,
-0x88, 0x6c, 0x2e, 0xc6, 0x3d, 0x4b, 0xfa, 0xc5,
-0x2d, 0x50, 0xc7, 0xa6, 0x3e, 0x21, 0xee, 0xc5,
-0x86, 0x1f, 0xd7, 0x60, 0xe2, 0x67, 0xd9, 0x04,
-0xee, 0xf7, 0x46, 0x06, 0xe1, 0x13, 0xc2, 0x15,
-0x16, 0xa7, 0x53, 0xfc, 0xa4, 0xe1, 0x9f, 0x7e,
-0x2e, 0x09, 0x1a, 0xa4, 0xea, 0x36, 0x6b, 0xd4,
-0xf1, 0x53, 0x5f, 0x3b, 0xe2, 0xa7, 0x30, 0xc3,
-0x85, 0x61, 0x35, 0x45, 0x5e, 0x30, 0x4a, 0x31,
-0x56, 0x51, 0xfe, 0xb8, 0x89, 0x9f, 0x18, 0xdf,
-0x5f, 0x84, 0xc5, 0x83, 0x8e, 0x34, 0xf1, 0x0b,
-0xef, 0x70, 0xb5, 0x43, 0xd1, 0x34, 0xb1, 0xc6,
-0xa1, 0x7f, 0xe2, 0x3e, 0xea, 0xc1, 0x57, 0x8a,
-0xb1, 0x51, 0x0a, 0x44, 0xec, 0xc1, 0xc8, 0x71,
-0xc3, 0x3f, 0xd3, 0x5c, 0xb9, 0x78, 0x17, 0xa9,
-0xa5, 0x8e, 0x06, 0x7c, 0xe8, 0x37, 0xa1, 0x96,
-0xfa, 0x3b, 0xc8, 0xa4, 0x31, 0x6e, 0x40, 0xac,
-0x48, 0xff, 0x82, 0x2e, 0xcf, 0xba, 0x3a, 0xf9,
-0x70, 0xfa, 0x35, 0xba, 0x5c, 0x2e, 0xee, 0xe4,
-0xcf, 0x5b, 0xf8, 0xf9, 0x43, 0x7a, 0x8d, 0x84,
-0x8f, 0xb8, 0x0e, 0xf0, 0x1f, 0x0a, 0xd7, 0xa0,
-0x89, 0x71, 0x94, 0x61, 0xa2, 0xaf, 0x0f, 0x6c,
-0x9f, 0xc4, 0x4f, 0x25, 0xc3, 0xe9, 0xd5, 0x3f,
-0xe9, 0xfe, 0x91, 0x72, 0x32, 0x15, 0x92, 0x8b,
-0x86, 0x78, 0xd5, 0xc2, 0xcf, 0xef, 0x24, 0xba,
-0x9f, 0xae, 0x4d, 0xe3, 0xf3, 0xea, 0xc8, 0x8e,
-0x4d, 0x7e, 0x59, 0xbc, 0x27, 0x1f, 0x3f, 0x61,
-0xb3, 0x1b, 0xe7, 0x12, 0x24, 0x3b, 0xe9, 0x93,
-0x72, 0x25, 0x6c, 0xe9, 0x70, 0xab, 0x92, 0xbe,
-0x3e, 0x59, 0xf7, 0x4f, 0xaa, 0xaf, 0x01, 0xc3,
-0x0c, 0x02, 0xd4, 0xa8, 0x60, 0xe2, 0xe7, 0x4b,
-0xc8, 0x7b, 0xc2, 0x48, 0x85, 0xaa, 0x5e, 0x42,
-0xc3, 0xfa, 0x00, 0xf7, 0xa6, 0x79, 0x4f, 0x0a,
-0x53, 0xe2, 0x35, 0x2e, 0x9c, 0x5a, 0x9d, 0xe1,
-0xa7, 0xd0, 0xd6, 0x68, 0xbc, 0x4c, 0x0e, 0x3f,
-0x25, 0x84, 0x00, 0xae, 0x99, 0xee, 0x98, 0xe6,
-0xaf, 0xc3, 0x0d, 0xb8, 0x0b, 0xec, 0xd3, 0xbc,
-0x6a, 0xe1, 0xe7, 0x06, 0x86, 0x2f, 0xff, 0xd3,
-0x81, 0xf8, 0x22, 0x1c, 0xc2, 0x01, 0x18, 0x7c,
-0x72, 0xf8, 0x19, 0x80, 0xc3, 0x5c, 0x5d, 0x17,
-0xeb, 0x83, 0x41, 0xea, 0xbb, 0xd5, 0x8e, 0x7d,
-0x96, 0x7f, 0x3a, 0x95, 0xfa, 0x78, 0xa0, 0xd7,
-0xb1, 0x74, 0x78, 0x2c, 0xbe, 0x4f, 0x96, 0x9d,
-0xf6, 0x65, 0x96, 0x7f, 0x42, 0xd1, 0xc3, 0xf2,
-0x35, 0x08, 0xf7, 0xb8, 0x2e, 0xf2, 0x37, 0xe8,
-0x55, 0xf4, 0xcf, 0xe2, 0x0c, 0xaf, 0x1a, 0xfe,
-0x99, 0xbe, 0x15, 0xa1, 0x4a, 0x6a, 0xb6, 0xf3,
-0x17, 0x79, 0xc4, 0xcf, 0xf5, 0x77, 0x4b, 0x45,
-0x1f, 0xf1, 0x39, 0xfc, 0xfc, 0x04, 0x66, 0x4b,
-0xee, 0x91, 0x1f, 0xb8, 0x54, 0x58, 0xa7, 0x8e,
-0xd1, 0x3f, 0x9f, 0x71, 0x36, 0xe4, 0xe1, 0xe7,
-0x8f, 0xa4, 0x83, 0x1d, 0xbe, 0xb8, 0xe3, 0x12,
-0x59, 0x10, 0xeb, 0x95, 0xeb, 0x46, 0xec, 0x43,
-0x88, 0x83, 0x06, 0x7e, 0x0a, 0x63, 0x80, 0x53,
-0xc8, 0xa2, 0xcd, 0x44, 0xd2, 0x5d, 0x18, 0xf8,
-0x39, 0xda, 0xec, 0x62, 0x3e, 0x7e, 0x0a, 0x08,
-0xb7, 0x19, 0xe2, 0x23, 0xbd, 0xb4, 0xf8, 0x55,
-0x7b, 0x0e, 0x3f, 0xc1, 0xa6, 0xc1, 0x66, 0x1c,
-0x5f, 0x69, 0x00, 0x56, 0x8e, 0xd6, 0xa5, 0x31,
-0x1e, 0xa9, 0x26, 0x7e, 0x96, 0xbc, 0x24, 0xce,
-0xc2, 0x2b, 0x0a, 0xc2, 0xe6, 0x04, 0xcc, 0xf2,
-0xcb, 0xe7, 0xf2, 0xcf, 0x3d, 0x26, 0x1c, 0x8d,
-0x49, 0xf8, 0x42, 0xba, 0x9c, 0x99, 0x3c, 0xfe,
-0x19, 0x10, 0x5f, 0x01, 0x7c, 0xde, 0x34, 0xee,
-0x69, 0xc4, 0xcf, 0x2e, 0x7c, 0x47, 0x21, 0xc3,
-0x66, 0xaa, 0xc0, 0x20, 0x47, 0xce, 0xde, 0x9e,
-0x29, 0xd0, 0x80, 0xb4, 0x45, 0x0c, 0xba, 0x1b,
-0x4c, 0xfc, 0x94, 0x2a, 0xfa, 0x10, 0xaa, 0x26,
-0x11, 0xaa, 0xde, 0x69, 0xfb, 0x3e, 0x0d, 0xb4,
-0x17, 0x3e, 0x41, 0x9a, 0x24, 0x7d, 0x5c, 0x54,
-0x2c, 0xa6, 0xfb, 0x20, 0x78, 0xde, 0x15, 0xe4,
-0x8f, 0xd3, 0x9f, 0xa5, 0x9b, 0xda, 0x9d, 0x8d,
-0xbc, 0xdb, 0xc4, 0x4f, 0xcf, 0x4b, 0x38, 0x97,
-0x57, 0x46, 0x5c, 0x97, 0xbb, 0x26, 0x0b, 0xde,
-0x96, 0x9a, 0x95, 0x3c, 0xfc, 0x14, 0xd9, 0xfa,
-0x64, 0xf4, 0xdd, 0x41, 0x86, 0xad, 0x5c, 0xe8,
-0x08, 0xce, 0xf3, 0xbc, 0xb1, 0xbe, 0x28, 0xb7,
-0x13, 0x0e, 0x46, 0x6b, 0x55, 0x47, 0x08, 0xfd,
-0x6c, 0x07, 0x04, 0xd5, 0xad, 0x1d, 0xe4, 0xa2,
-0x61, 0x17, 0x19, 0xf9, 0xe7, 0xc1, 0x34, 0x62,
-0xf9, 0x13, 0xe4, 0xcb, 0xf0, 0x7d, 0xfa, 0xd5,
-0xac, 0xd8, 0x89, 0xef, 0x5d, 0x5f, 0x5f, 0x3b,
-0xfa, 0xa7, 0x11, 0xab, 0x9c, 0x52, 0x37, 0x95,
-0x55, 0x7b, 0x1e, 0x7e, 0x0a, 0x03, 0x08, 0x9b,
-0xcd, 0x0c, 0x36, 0x3b, 0xe1, 0x42, 0xf4, 0xae,
-0x64, 0x00, 0xf1, 0xd3, 0xb0, 0x59, 0x54, 0x62,
-0x54, 0x28, 0x2c, 0x23, 0x7e, 0xbe, 0x07, 0x33,
-0xa2, 0x06, 0xa4, 0x39, 0xfc, 0xec, 0x87, 0x37,
-0xa1, 0xb1, 0xbd, 0x48, 0xe2, 0x93, 0x70, 0x4c,
-0x08, 0x22, 0x4e, 0x70, 0xc3, 0x60, 0xe2, 0x67,
-0x35, 0xec, 0xe5, 0xe4, 0x38, 0xe2, 0x67, 0x35,
-0x74, 0x91, 0xdd, 0x8a, 0x78, 0x33, 0x7e, 0xd6,
-0x28, 0x85, 0x29, 0xd2, 0x0f, 0x5b, 0x38, 0x5f,
-0x8b, 0x38, 0x07, 0x3f, 0x61, 0x6f, 0xb5, 0x8f,
-0xe1, 0xa7, 0x40, 0xb7, 0x40, 0x3c, 0x2a, 0xe6,
-0xe1, 0xe7, 0xfc, 0x38, 0xcc, 0xc4, 0x1a, 0xa1,
-0x08, 0xf9, 0xa7, 0x32, 0x1a, 0x0b, 0x79, 0x02,
-0x94, 0x37, 0xf1, 0x73, 0x68, 0x3e, 0xc2, 0x91,
-0xd4, 0x7c, 0x04, 0xf1, 0xf3, 0xf2, 0x1a, 0x8c,
-0x9b, 0x6d, 0xae, 0x1c, 0x7e, 0x36, 0x20, 0x9f,
-0x7f, 0xb3, 0xa5, 0x19, 0x29, 0x62, 0x62, 0x22,
-0x7d, 0x9f, 0xb4, 0x6c, 0xd4, 0x39, 0xee, 0x7b,
-0xdf, 0xf0, 0x4f, 0x2f, 0x64, 0xa5, 0x21, 0xa5,
-0x0e, 0x1c, 0x4f, 0x26, 0x14, 0x4a, 0x41, 0xb6,
-0xfb, 0x73, 0xf8, 0x19, 0xb5, 0x25, 0x61, 0x6f,
-0x3c, 0xa0, 0xdc, 0x8a, 0x58, 0x9e, 0x46, 0x32,
-0xbd, 0x4a, 0x94, 0xe0, 0xb4, 0x89, 0x9f, 0x9e,
-0x7e, 0x16, 0x03, 0xe2, 0x2b, 0x53, 0xc2, 0x7a,
-0xb2, 0x05, 0x63, 0x80, 0x37, 0x0f, 0x3f, 0x85,
-0x7e, 0xef, 0x9b, 0x10, 0x8e, 0x17, 0xa5, 0xd6,
-0xfd, 0xe3, 0xd2, 0x23, 0xc9, 0x6f, 0xb4, 0xac,
-0x4a, 0xb5, 0x9a, 0xf8, 0xd9, 0x2e, 0xb1, 0x71,
-0x1a, 0x7e, 0xb6, 0x49, 0x48, 0x9c, 0x58, 0xe3,
-0x2d, 0xc3, 0xd6, 0x7e, 0xcd, 0xd6, 0x3e, 0xa9,
-0x88, 0xb6, 0x56, 0xc2, 0x68, 0x24, 0x04, 0x47,
-0x69, 0x95, 0x89, 0x9f, 0xa2, 0xe0, 0x87, 0x97,
-0xc1, 0x37, 0x20, 0x66, 0x89, 0x1f, 0xb6, 0x62,
-0x8c, 0x2b, 0xce, 0x5a, 0xf8, 0x29, 0x22, 0x7e,
-0x3e, 0x8b, 0xfe, 0x89, 0xf1, 0x7d, 0x1b, 0x62,
-0x4f, 0x8d, 0x5a, 0x28, 0x93, 0xe3, 0x56, 0x7c,
-0x2f, 0x17, 0x0e, 0xa6, 0xab, 0xb2, 0x85, 0x9d,
-0xe4, 0x2c, 0x6c, 0x96, 0x17, 0x8d, 0x88, 0x71,
-0x0b, 0x3f, 0xfd, 0xde, 0x0a, 0xd8, 0x37, 0x50,
-0x9f, 0x7d, 0xe0, 0x4f, 0xab, 0xbe, 0x4b, 0x5f,
-0x7b, 0xe1, 0xee, 0xac, 0xab, 0x3d, 0x0f, 0x3f,
-0x71, 0xff, 0x75, 0xbc, 0xac, 0x16, 0x0f, 0xf2,
-0xb5, 0xe8, 0xa8, 0xcb, 0xc6, 0x17, 0xe7, 0xf8,
-0x67, 0x5c, 0xf8, 0x11, 0x30, 0x9a, 0xb4, 0xe3,
-0x4a, 0xf7, 0xac, 0xf2, 0x41, 0x5f, 0xf3, 0xe5,
-0x40, 0x7b, 0x95, 0x64, 0xe2, 0xa7, 0xb4, 0x7d,
-0xe4, 0x20, 0x95, 0x27, 0x0b, 0x67, 0x48, 0xb8,
-0xba, 0x9b, 0x2e, 0x9e, 0xf4, 0xb6, 0x93, 0x9a,
-0x3c, 0xfc, 0xfc, 0xa6, 0x5c, 0x39, 0x8a, 0x7b,
-0x0c, 0x9d, 0x18, 0x6a, 0x55, 0x31, 0x5e, 0x53,
-0x60, 0xf8, 0xa7, 0xe2, 0xd9, 0x26, 0xec, 0x23,
-0xb2, 0xda, 0x1b, 0x24, 0xc5, 0x52, 0xa9, 0x8a,
-0xfc, 0x53, 0x26, 0x5e, 0x13, 0x3f, 0x6d, 0x7b,
-0xe0, 0x5d, 0x08, 0xbd, 0x31, 0x6f, 0x9a, 0x7f,
-0x19, 0x66, 0xa3, 0xcd, 0xaa, 0x33, 0x7d, 0x7b,
-0x9d, 0xc5, 0xf5, 0x19, 0x16, 0x84, 0xd5, 0xa2,
-0x0c, 0xbf, 0x07, 0x18, 0x39, 0x72, 0xa5, 0xe7,
-0xe0, 0xe7, 0x35, 0x68, 0xce, 0xba, 0xa6, 0xed,
-0xe5, 0xe4, 0x54, 0xe1, 0x72, 0x15, 0x8d, 0x67,
-0x72, 0x37, 0x03, 0x3f, 0x55, 0xc4, 0x17, 0xe4,
-0x98, 0xa4, 0x4e, 0x2d, 0x4a, 0xfb, 0x4c, 0xff,
-0xa4, 0x36, 0xd6, 0x57, 0x33, 0x82, 0x5b, 0x64,
-0x0f, 0x72, 0xa9, 0xc7, 0x54, 0x7b, 0x3a, 0x87,
-0x9f, 0x92, 0x53, 0xde, 0x27, 0x06, 0x46, 0x1d,
-0xa1, 0x82, 0x6d, 0xe9, 0xee, 0x75, 0x81, 0x9f,
-0xf2, 0x0b, 0x13, 0x16, 0x7e, 0x8a, 0x1b, 0x90,
-0xbb, 0x35, 0xaa, 0xc5, 0x17, 0xb9, 0x9f, 0xa8,
-0xa7, 0xe4, 0xe6, 0xd1, 0xe2, 0x7e, 0x3e, 0x6b,
-0xe2, 0x67, 0xd9, 0x75, 0x79, 0x16, 0xc2, 0x6b,
-0x90, 0x1e, 0x6f, 0x10, 0x67, 0xe3, 0xe1, 0x31,
-0x24, 0x2b, 0x93, 0x11, 0x0b, 0x3f, 0x3d, 0xd3,
-0xc9, 0xc3, 0x72, 0x51, 0x94, 0x34, 0xc0, 0x25,
-0x7a, 0x57, 0xb6, 0x18, 0xf9, 0xa7, 0xe1, 0x2f,
-0x14, 0x2e, 0x88, 0x43, 0xd4, 0x27, 0xa3, 0x5b,
-0xfa, 0x00, 0x05, 0x24, 0xe3, 0x9f, 0xd3, 0x96,
-0x7e, 0x1f, 0x83, 0x0c, 0x0b, 0x35, 0x80, 0x12,
-0x71, 0x1f, 0xf4, 0xb3, 0xcd, 0x9d, 0x8f, 0x9f,
-0x38, 0xce, 0x27, 0xf6, 0x3c, 0x33, 0x00, 0xf7,
-0x80, 0x8f, 0x2d, 0x34, 0x1f, 0x3f, 0xaf, 0xa4,
-0x1b, 0x82, 0x45, 0x4e, 0xfe, 0x07, 0x70, 0x09,
-0x96, 0xa9, 0xc5, 0x19, 0x62, 0xea, 0x07, 0xc4,
-0x4f, 0xe7, 0x75, 0x68, 0xe6, 0x76, 0x8c, 0xf3,
-0x7f, 0x60, 0xf2, 0xcf, 0xeb, 0x79, 0xf8, 0x89,
-0xfb, 0x1d, 0x9c, 0xc9, 0xee, 0x01, 0x8d, 0x7f,
-0xba, 0x32, 0xe4, 0x0d, 0xe3, 0xfd, 0x21, 0x7e,
-0x52, 0x4a, 0x6b, 0x0a, 0xc4, 0xe7, 0xc9, 0x00,
-0xe2, 0xa7, 0xf6, 0xbc, 0x8b, 0x39, 0xfc, 0x14,
-0x52, 0x6e, 0x3f, 0xe2, 0xa1, 0xd2, 0x83, 0xf8,
-0xa9, 0x71, 0x37, 0x93, 0xd7, 0xc9, 0x4a, 0x05,
-0x6c, 0xa3, 0x8b, 0x64, 0xf1, 0x18, 0x79, 0x3e,
-0xf9, 0x7d, 0x06, 0xa4, 0x4f, 0xc0, 0x75, 0xa3,
-0x2f, 0xea, 0x75, 0xc2, 0x78, 0xba, 0x41, 0x0e,
-0xd8, 0xf9, 0xde, 0xe4, 0xcf, 0x92, 0x0d, 0x93,
-0x2e, 0xe4, 0x9f, 0x05, 0x7a, 0x9f, 0x52, 0xbe,
-0x13, 0xae, 0x56, 0x2e, 0x87, 0x1d, 0x09, 0x7e,
-0x52, 0x79, 0x1b, 0x8d, 0xee, 0x42, 0x0e, 0x5d,
-0x60, 0xec, 0x95, 0xb2, 0x29, 0x61, 0x1a, 0x96,
-0xb5, 0x6c, 0xa5, 0x3c, 0x03, 0xfc, 0x85, 0x0c,
-0xf0, 0x87, 0x4d, 0xfe, 0x79, 0x5f, 0x39, 0xec,
-0x27, 0x95, 0x8a, 0x4d, 0x25, 0x5e, 0xf4, 0xc1,
-0x4a, 0xe4, 0x9f, 0x70, 0xd1, 0x58, 0x9f, 0x0c,
-0x15, 0xb0, 0x9f, 0x2e, 0x96, 0xed, 0x51, 0x82,
-0x40, 0x4a, 0x17, 0x30, 0xfe, 0x79, 0xc6, 0x98,
-0x4b, 0x3b, 0xc6, 0xaa, 0xcc, 0x1a, 0x7f, 0x62,
-0x4b, 0x6d, 0x82, 0xd9, 0xba, 0x9a, 0xad, 0xe1,
-0xad, 0x3c, 0xfe, 0xf9, 0xb1, 0xba, 0xbc, 0xa7,
-0x22, 0xcb, 0x7f, 0x4b, 0xbe, 0x0a, 0xcb, 0xa8,
-0x83, 0xe1, 0xa7, 0x3e, 0x17, 0xd4, 0xef, 0x30,
-0x24, 0x2e, 0x2c, 0xb9, 0x23, 0x59, 0x1a, 0x4f,
-0xcd, 0xa0, 0xf1, 0x5c, 0xb4, 0xea, 0xb4, 0xb9,
-0xa7, 0x19, 0xff, 0x4c, 0x84, 0x62, 0xfc, 0xf3,
-0x7c, 0xb5, 0x74, 0x2c, 0xb2, 0x90, 0x71, 0xbe,
-0x61, 0xa3, 0x8f, 0x0a, 0x0b, 0x94, 0x43, 0xf4,
-0x85, 0xb5, 0x3d, 0x5e, 0xc4, 0xcf, 0x5d, 0xd4,
-0xa7, 0xf3, 0x4f, 0xfd, 0xd2, 0xf0, 0x53, 0xaa,
-0x41, 0x48, 0xb5, 0x57, 0x9b, 0x24, 0x6e, 0x0e,
-0x7e, 0x22, 0xb6, 0x8a, 0x92, 0xbd, 0x3a, 0x59,
-0xc9, 0xc8, 0x1f, 0xc3, 0x4f, 0xfd, 0x9e, 0x43,
-0xf3, 0xdb, 0x11, 0xe7, 0x1b, 0xa1, 0xf6, 0xaf,
-0x19, 0x3f, 0xd3, 0x49, 0xf1, 0x85, 0x79, 0x39,
-0xfc, 0xbc, 0x01, 0xcb, 0x95, 0xa2, 0x71, 0xfe,
-0xb2, 0xf2, 0x11, 0xdc, 0xc2, 0xe6, 0x72, 0xc1,
-0xc2, 0xcf, 0xfd, 0xf0, 0x0f, 0x64, 0xb9, 0xe2,
-0x8c, 0x71, 0xd5, 0xf2, 0x3f, 0x40, 0x85, 0x72,
-0x47, 0xaa, 0xea, 0x82, 0xe1, 0x83, 0x88, 0x9f,
-0x30, 0x84, 0xae, 0x59, 0x44, 0xa1, 0x12, 0x7a,
-0x00, 0x81, 0x94, 0xe2, 0x5c, 0x0c, 0xfc, 0x14,
-0x92, 0xc2, 0xb7, 0xa0, 0x5a, 0xf1, 0xbb, 0x13,
-0xd5, 0xe4, 0x69, 0x08, 0x28, 0x76, 0x89, 0x9c,
-0x36, 0xe6, 0xe2, 0x8d, 0xf5, 0x6b, 0xd4, 0xb9,
-0x10, 0xd7, 0x40, 0xd9, 0x1a, 0x56, 0x32, 0xfc,
-0xd4, 0xfb, 0xd2, 0x6d, 0xfd, 0xc2, 0x4f, 0xe9,
-0xd2, 0x3f, 0xf1, 0x78, 0xb9, 0x6a, 0x74, 0xb8,
-0x3f, 0x67, 0x18, 0x39, 0x69, 0xc6, 0xb1, 0x12,
-0xd4, 0xf6, 0xfe, 0x70, 0xc7, 0x1d, 0xcf, 0x39,
-0x18, 0xff, 0xd4, 0xfa, 0xde, 0x32, 0x39, 0xa6,
-0x24, 0xcb, 0xa8, 0xdf, 0xbd, 0x2e, 0xda, 0x9a,
-0xd6, 0xd6, 0xf7, 0x54, 0x8e, 0x7f, 0x8a, 0xb6,
-0x46, 0x28, 0x56, 0xaa, 0x32, 0xf6, 0xf7, 0x71,
-0xaf, 0xbc, 0xd3, 0x56, 0x87, 0xbf, 0x12, 0x31,
-0x75, 0xa3, 0x68, 0x5b, 0x01, 0x5d, 0x0f, 0xca,
-0x9b, 0x6e, 0x0d, 0x24, 0x9c, 0xb0, 0x3b, 0xab,
-0x05, 0xc9, 0xe1, 0x9c, 0x3e, 0xf2, 0x3d, 0x05,
-0xeb, 0x90, 0x7a, 0x91, 0x97, 0xe0, 0x2f, 0x8b,
-0xbe, 0xc6, 0xf4, 0xca, 0xa8, 0x89, 0xd7, 0x5e,
-0x37, 0x42, 0xf4, 0x12, 0xb9, 0xa8, 0x93, 0xaf,
-0x80, 0x09, 0x3a, 0x3f, 0xfb, 0xed, 0x4e, 0x2b,
-0x97, 0x20, 0xce, 0xa7, 0x30, 0x8d, 0x88, 0xbd,
-0x38, 0x33, 0x6f, 0x4c, 0x9a, 0x81, 0x0a, 0x14,
-0x7b, 0x7c, 0xe4, 0x16, 0x7d, 0x5c, 0x5c, 0x78,
-0x1e, 0xa6, 0xe8, 0x8b, 0xeb, 0xeb, 0x3a, 0xab,
-0x2a, 0x50, 0xc8, 0x37, 0x4f, 0xb8, 0x66, 0xf8,
-0x33, 0xc6, 0x3c, 0x07, 0xa0, 0x2f, 0x99, 0x94,
-0x97, 0xca, 0x45, 0x41, 0x7b, 0x31, 0xdd, 0xbc,
-0x2b, 0x90, 0x45, 0x22, 0x7a, 0x9e, 0xc8, 0x86,
-0xd3, 0xa7, 0x0a, 0xf6, 0xc0, 0x22, 0xa7, 0xe3,
-0x23, 0xd2, 0x44, 0x37, 0x05, 0x6b, 0x47, 0x71,
-0x2e, 0x47, 0x15, 0xbd, 0x4f, 0xf1, 0x50, 0xa0,
-0x4a, 0xbf, 0x5c, 0xb8, 0x94, 0x14, 0x91, 0x2e,
-0x2d, 0xd0, 0xfb, 0xc6, 0x0d, 0x6d, 0x3f, 0x80,
-0x9c, 0x3d, 0xab, 0x36, 0x90, 0xe2, 0xfd, 0xbc,
-0x8b, 0x24, 0x04, 0xb6, 0x6f, 0xf9, 0x0b, 0x54,
-0x9f, 0x4b, 0x1a, 0x7d, 0x70, 0x26, 0x16, 0x96,
-0x16, 0xff, 0x98, 0x9f, 0x52, 0xae, 0x46, 0xc2,
-0xea, 0x8e, 0x4c, 0xd5, 0xa4, 0xa5, 0xdf, 0xa7,
-0x85, 0x29, 0xb1, 0x5e, 0x2e, 0x9a, 0x7e, 0xf6,
-0xba, 0x7c, 0x76, 0x77, 0x95, 0xba, 0x7a, 0xba,
-0x34, 0x6e, 0x70, 0xcc, 0x2e, 0xe1, 0x11, 0x18,
-0x18, 0xf5, 0x85, 0x6a, 0xfb, 0xc8, 0x14, 0xe9,
-0x39, 0x57, 0x83, 0xfb, 0xdd, 0x97, 0xe3, 0x9f,
-0xd8, 0x97, 0xd8, 0x2d, 0x2e, 0x7a, 0x09, 0xfb,
-0x86, 0xa0, 0xe6, 0x48, 0x61, 0xc6, 0x9d, 0xd3,
-0xef, 0xf8, 0x4c, 0x48, 0x17, 0xde, 0xb7, 0x84,
-0x7c, 0x88, 0xe4, 0xbe, 0x7d, 0xd4, 0xb1, 0xb4,
-0x60, 0x58, 0x30, 0x1d, 0x5b, 0x86, 0xc9, 0x58,
-0xe8, 0xb6, 0xa2, 0xfd, 0xa5, 0x1f, 0xd2, 0x19,
-0xa9, 0xf1, 0x9d, 0xa2, 0x03, 0x5d, 0x71, 0xd9,
-0xd4, 0xef, 0xd3, 0x70, 0x19, 0x96, 0xdb, 0x71,
-0x0a, 0x53, 0x23, 0x67, 0xdd, 0xe1, 0x51, 0xdc,
-0xef, 0x66, 0x4c, 0x55, 0x6d, 0xff, 0x04, 0xa7,
-0x68, 0x48, 0x2d, 0x7c, 0x89, 0x7f, 0x5f, 0x79,
-0x97, 0x86, 0xc7, 0x03, 0x43, 0x16, 0xff, 0x54,
-0xa5, 0x09, 0xd2, 0xdd, 0x53, 0x75, 0x19, 0xa9,
-0xe5, 0x18, 0xf4, 0xd2, 0xba, 0x37, 0xc4, 0x21,
-0xc8, 0x5a, 0xf1, 0x7d, 0x8a, 0x7e, 0x4f, 0x4e,
-0x33, 0x2e, 0x35, 0x46, 0x9f, 0x85, 0xc0, 0xe8,
-0xad, 0xf9, 0xfa, 0xbd, 0xbf, 0xfc, 0x6f, 0x11,
-0xc6, 0xc4, 0x4c, 0xc1, 0x94, 0xd4, 0xcb, 0xd5,
-0xa9, 0x85, 0x39, 0xfc, 0xa4, 0x65, 0x23, 0x18,
-0x6a, 0x42, 0x68, 0x2a, 0xfe, 0x82, 0x26, 0xe4,
-0x31, 0xf8, 0x98, 0xfa, 0x21, 0xcb, 0xed, 0x17,
-0xde, 0x25, 0xcb, 0x19, 0x6c, 0xce, 0x22, 0x7e,
-0x2e, 0x57, 0x8b, 0x91, 0x7f, 0x9a, 0xba, 0x1f,
-0x63, 0xff, 0x35, 0x18, 0x44, 0xb8, 0xd5, 0x63,
-0xd5, 0x11, 0xc6, 0xf9, 0x8c, 0xf7, 0xde, 0x83,
-0x7b, 0xfa, 0xf0, 0xd6, 0x2a, 0x7c, 0xde, 0x1a,
-0x96, 0xf3, 0x58, 0x7c, 0xc4, 0x31, 0x47, 0xbf,
-0x8b, 0xc8, 0x3f, 0x91, 0xb2, 0x45, 0xa6, 0x18,
-0xff, 0x3c, 0x92, 0x87, 0x9f, 0xe9, 0xae, 0x5b,
-0xd4, 0x83, 0x29, 0xf9, 0x9c, 0xd8, 0xe9, 0xfe,
-0xf2, 0xc8, 0x66, 0x5a, 0x8b, 0xf8, 0x49, 0xce,
-0x18, 0xf6, 0x8c, 0x46, 0x8b, 0xe1, 0x52, 0x26,
-0x98, 0x2d, 0x6e, 0xe0, 0x4f, 0xc2, 0xcf, 0x68,
-0xd3, 0xa4, 0xab, 0x31, 0x4f, 0xbf, 0xef, 0x67,
-0xb1, 0x71, 0x1c, 0xa7, 0xb0, 0x47, 0xc2, 0xc0,
-0x34, 0xec, 0xda, 0x6b, 0xcd, 0x65, 0xc0, 0x36,
-0x51, 0x78, 0x02, 0x06, 0xb1, 0xaf, 0x4a, 0xcb,
-0x33, 0x64, 0x8b, 0xf2, 0xf0, 0xf3, 0xe9, 0xe7,
-0xb8, 0xcd, 0x50, 0x79, 0x06, 0x5d, 0x0f, 0xf9,
-0x04, 0x2c, 0x1e, 0x15, 0x51, 0xbf, 0x1b, 0xfb,
-0x81, 0xc2, 0x01, 0xd8, 0x9c, 0xd4, 0x64, 0xfb,
-0x27, 0x12, 0xce, 0x85, 0x91, 0x8e, 0x51, 0x2b,
-0xff, 0xf9, 0x7e, 0xe4, 0x6f, 0x99, 0x1c, 0x66,
-0xef, 0x41, 0xcb, 0x2f, 0xcd, 0xc1, 0x4f, 0xe9,
-0x38, 0x0a, 0x15, 0xe4, 0x9f, 0x93, 0xa6, 0x90,
-0xbf, 0xca, 0xe9, 0xf7, 0x64, 0xfa, 0x7d, 0xad,
-0xa1, 0xdf, 0x15, 0x43, 0xc8, 0x9b, 0xf9, 0x02,
-0x2d, 0xff, 0x09, 0xa1, 0x16, 0x17, 0xd3, 0xe1,
-0xc7, 0x74, 0x52, 0x95, 0xc3, 0xcf, 0xf5, 0xb0,
-0x85, 0x68, 0xb0, 0x39, 0x42, 0xb6, 0x70, 0x8f,
-0xdd, 0x84, 0x9f, 0xe2, 0x16, 0x5d, 0xb6, 0x4f,
-0xc0, 0xcd, 0xf8, 0xd9, 0x26, 0x40, 0x17, 0xa4,
-0xa3, 0x08, 0x9b, 0x13, 0xd0, 0xc5, 0x05, 0xa2,
-0x73, 0xf5, 0x7b, 0x4c, 0x65, 0xb2, 0x9d, 0xe9,
-0xf7, 0x51, 0xa8, 0xf3, 0xec, 0xc8, 0xe1, 0xe7,
-0xe8, 0xfc, 0x37, 0x58, 0x3a, 0xb1, 0x6d, 0x75,
-0xaa, 0xf5, 0x0d, 0x91, 0x35, 0x5c, 0x39, 0xfc,
-0xf4, 0xda, 0x5e, 0x45, 0x6c, 0x0d, 0x99, 0x9a,
-0x39, 0x7c, 0xbf, 0x8b, 0xe1, 0xa7, 0xde, 0xd7,
-0x29, 0x21, 0x7e, 0xca, 0xbb, 0x19, 0x6c, 0x62,
-0x03, 0xea, 0xbc, 0x0e, 0xea, 0x36, 0xf1, 0x13,
-0xf5, 0x3b, 0xec, 0x15, 0xe5, 0x18, 0xf2, 0x56,
-0xa6, 0xdf, 0x03, 0x11, 0x9c, 0xcb, 0x69, 0xc3,
-0x9e, 0xde, 0xb2, 0x7e, 0xc4, 0x79, 0x63, 0x0d,
-0x87, 0x8c, 0x35, 0x98, 0xf8, 0xe9, 0x61, 0xf9,
-0x4f, 0xed, 0x79, 0xef, 0x03, 0x4b, 0x2a, 0xec,
-0xc8, 0xc3, 0x4f, 0xe8, 0x37, 0xd2, 0x9e, 0x8f,
-0x4e, 0x28, 0x46, 0xfe, 0x33, 0x87, 0x9f, 0x08,
-0x9b, 0x74, 0x90, 0x99, 0xd8, 0x8a, 0x0f, 0x96,
-0x7e, 0x47, 0xfe, 0xb9, 0x1d, 0x69, 0x27, 0xd3,
-0xef, 0xf0, 0x82, 0x50, 0xc7, 0x1a, 0x26, 0x7e,
-0x32, 0xfd, 0xde, 0xad, 0xbd, 0x5b, 0x9f, 0x9e,
-0x3b, 0x9c, 0x83, 0x9f, 0x61, 0xba, 0x99, 0x85,
-0xd9, 0x4e, 0xd4, 0xef, 0xdf, 0x87, 0xda, 0x57,
-0x35, 0xfc, 0xd4, 0x6d, 0xed, 0x17, 0x2b, 0xc8,
-0x29, 0xba, 0x24, 0xeb, 0xba, 0xc6, 0x87, 0x55,
-0xd4, 0xef, 0x93, 0xae, 0xce, 0xaa, 0xe3, 0x46,
-0x7c, 0x47, 0xfe, 0x49, 0x19, 0xaf, 0x43, 0x0d,
-0xf4, 0xa1, 0xde, 0xc8, 0xe4, 0xe5, 0x3f, 0xff,
-0x29, 0x7e, 0x72, 0x33, 0xe3, 0x9f, 0x3f, 0x43,
-0xe1, 0x49, 0x91, 0xe0, 0xcd, 0x94, 0x9e, 0x31,
-0xd6, 0x87, 0xfa, 0xdd, 0xb7, 0x15, 0xee, 0x3c,
-0xe2, 0xe8, 0x8c, 0x9c, 0xad, 0xde, 0x47, 0x6b,
-0xa7, 0x56, 0xfe, 0xa9, 0xfb, 0xbc, 0xb1, 0x06,
-0xa0, 0x3b, 0xe9, 0x76, 0x2d, 0xe4, 0xa3, 0xef,
-0x1e, 0x14, 0x10, 0x3f, 0x1f, 0x27, 0x23, 0x06,
-0x7e, 0xc6, 0x3d, 0x27, 0x91, 0x56, 0x57, 0xb3,
-0x6d, 0x87, 0x42, 0x49, 0xa8, 0x53, 0x57, 0x06,
-0x89, 0xb5, 0x1f, 0xca, 0x5e, 0x96, 0x8e, 0x31,
-0xdd, 0xc8, 0xa8, 0xd0, 0x35, 0x61, 0x31, 0xce,
-0xe5, 0x8b, 0xe7, 0x2d, 0x9f, 0x9f, 0x92, 0x8c,
-0xe9, 0xe9, 0x44, 0x94, 0x35, 0x84, 0x1c, 0xff,
-0xbc, 0x01, 0xf5, 0x6c, 0x5c, 0x93, 0xc6, 0xa5,
-0x9c, 0xd3, 0x7c, 0xb6, 0xcd, 0xd4, 0x47, 0x8c,
-0x63, 0x32, 0x9a, 0xb4, 0x66, 0x0f, 0x13, 0xeb,
-0x2a, 0xea, 0xdb, 0x73, 0x16, 0x7e, 0x6e, 0x80,
-0x43, 0x3d, 0x3e, 0x9d, 0x9b, 0x32, 0x92, 0xca,
-0xb4, 0xbd, 0x89, 0x9f, 0x80, 0xfc, 0x93, 0xd9,
-0x3a, 0xe3, 0x7e, 0x4a, 0xd8, 0x57, 0x55, 0x37,
-0x8c, 0x24, 0x35, 0xc7, 0x3f, 0xff, 0x33, 0xbd,
-0x22, 0x85, 0x46, 0x5c, 0xff, 0x5c, 0xba, 0x1c,
-0xae, 0x29, 0xe1, 0xf1, 0x6d, 0xfb, 0xf8, 0xac,
-0xb1, 0xdf, 0xd3, 0xf3, 0xaf, 0xa7, 0x67, 0xab,
-0x9b, 0x8f, 0xb9, 0xf6, 0x31, 0xfd, 0xde, 0x10,
-0x3e, 0xe1, 0x3a, 0x90, 0xd3, 0xef, 0xdc, 0x27,
-0xc8, 0xe7, 0x97, 0xc7, 0x5d, 0x43, 0x7c, 0x0d,
-0x8c, 0xe1, 0xfe, 0xbb, 0x63, 0xc8, 0xaa, 0x1f,
-0xa9, 0xe2, 0x05, 0x38, 0x9c, 0x40, 0xf7, 0xca,
-0x90, 0x1a, 0x78, 0xab, 0xab, 0x8e, 0xf1, 0x4f,
-0x99, 0xe8, 0x6b, 0x18, 0x45, 0xfe, 0xb9, 0x8f,
-0x6c, 0x50, 0xf0, 0x75, 0xfb, 0xc0, 0x78, 0xef,
-0x16, 0x7e, 0xda, 0x98, 0x7e, 0x7f, 0x2c, 0xae,
-0xe9, 0xf7, 0xbf, 0x82, 0xba, 0x11, 0x96, 0xff,
-0x34, 0x6c, 0x26, 0x95, 0x69, 0xa6, 0x92, 0x4f,
-0x05, 0x79, 0x3b, 0x8c, 0x46, 0xc3, 0x69, 0x47,
-0xc6, 0x91, 0x97, 0xff, 0xf4, 0xa2, 0xa9, 0x50,
-0xbf, 0x3b, 0x66, 0xe0, 0x13, 0x96, 0x4f, 0x9e,
-0x76, 0x34, 0x18, 0xe3, 0x62, 0x9a, 0x7e, 0x47,
-0xfd, 0xa7, 0xd5, 0x65, 0x20, 0x34, 0xd2, 0x94,
-0xc3, 0x4f, 0xa6, 0xdf, 0xd1, 0x54, 0xdf, 0x10,
-0x87, 0x50, 0x53, 0xf6, 0xc2, 0xb2, 0xac, 0x18,
-0x8c, 0xe4, 0xf8, 0x27, 0xcb, 0x2f, 0xf9, 0x95,
-0xc2, 0x06, 0x22, 0x72, 0x5d, 0x44, 0x90, 0xc5,
-0x20, 0x4c, 0x73, 0xba, 0x3d, 0xa7, 0xe1, 0xcb,
-0xf4, 0x20, 0xad, 0x5d, 0x8f, 0x52, 0xf9, 0xf9,
-0xae, 0x1d, 0x5d, 0x0b, 0x3a, 0xb1, 0x31, 0x2a,
-0xe9, 0xef, 0x21, 0x0a, 0x5f, 0xa0, 0x97, 0x52,
-0x0d, 0x3f, 0x7f, 0x60, 0xa8, 0x97, 0xd0, 0x13,
-0x74, 0xe9, 0xa4, 0x88, 0xfc, 0xd3, 0x30, 0xb5,
-0x32, 0x1f, 0xf5, 0xbb, 0x3b, 0xcc, 0x64, 0xbb,
-0xaa, 0xbd, 0xf7, 0x53, 0x37, 0xe9, 0x77, 0x5c,
-0xdf, 0xfc, 0x0c, 0xef, 0x87, 0x63, 0x34, 0x24,
-0x3b, 0x73, 0xf8, 0x39, 0x7a, 0xab, 0x26, 0x7d,
-0x94, 0xb5, 0xd3, 0xfc, 0x5a, 0xf8, 0x5f, 0x50,
-0xa9, 0xf4, 0x74, 0xf8, 0x4e, 0x1b, 0xe3, 0x34,
-0xfd, 0x8e, 0xfc, 0xf3, 0xbe, 0xce, 0xd0, 0x60,
-0x10, 0x35, 0x3a, 0xd3, 0xef, 0x3d, 0xe6, 0xbe,
-0x45, 0xfe, 0x79, 0x18, 0x02, 0x31, 0x31, 0x68,
-0x3f, 0x8e, 0x62, 0x2f, 0xad, 0xfa, 0x11, 0x3f,
-0x21, 0x57, 0x3f, 0x42, 0xfd, 0x3e, 0x84, 0xb0,
-0x39, 0x04, 0x27, 0xa1, 0x9e, 0x3a, 0xd3, 0xfc,
-0x8b, 0x56, 0xbe, 0x40, 0xd3, 0xef, 0x6e, 0x17,
-0x25, 0x8f, 0x98, 0x89, 0x50, 0x13, 0xaf, 0x45,
-0xad, 0x4e, 0x12, 0x8a, 0xbb, 0xfa, 0x4a, 0xab,
-0x7f, 0x15, 0x7e, 0x1e, 0x22, 0xbe, 0x0e, 0x47,
-0x9f, 0x4f, 0x80, 0x2d, 0x2d, 0x75, 0xb1, 0xbc,
-0xfc, 0x67, 0x83, 0xa6, 0xdf, 0x7d, 0x6b, 0x1d,
-0x6e, 0xe4, 0xa6, 0x5b, 0x0a, 0xeb, 0x22, 0xd8,
-0x77, 0xd2, 0xdc, 0xd3, 0x1e, 0x01, 0xfb, 0x64,
-0xa5, 0x57, 0x22, 0x0b, 0xa1, 0x4b, 0xd6, 0xf0,
-0xf3, 0xb8, 0x4d, 0xb7, 0xd9, 0x50, 0x51, 0x5c,
-0x98, 0x81, 0xc1, 0x32, 0xc4, 0x4f, 0x59, 0x62,
-0xf8, 0xb2, 0x23, 0xa7, 0xdf, 0xfb, 0xca, 0x18,
-0x34, 0x2e, 0x67, 0x35, 0x9b, 0x37, 0x0a, 0x6e,
-0x48, 0xba, 0x7e, 0x37, 0x6c, 0xd6, 0x67, 0x63,
-0x7d, 0xcd, 0x8a, 0x73, 0xbc, 0x4a, 0x90, 0x8e,
-0x89, 0xe1, 0xfb, 0x9d, 0xe3, 0xfc, 0x51, 0xc3,
-0xcf, 0x1a, 0xbc, 0x1a, 0x6c, 0x8a, 0x48, 0xf5,
-0xe2, 0xd0, 0xd3, 0xb2, 0x58, 0x62, 0xf9, 0xcf,
-0x02, 0x23, 0xbe, 0x03, 0xea, 0x77, 0x08, 0xb4,
-0xde, 0x16, 0xa2, 0xfb, 0xc5, 0x4d, 0x5d, 0xb5,
-0x71, 0x91, 0xf1, 0x4f, 0x7d, 0xed, 0x5e, 0x81,
-0xf1, 0xcf, 0xc7, 0x94, 0xdb, 0x53, 0x35, 0x13,
-0xbb, 0x9f, 0x92, 0x17, 0x47, 0xb5, 0x1c, 0x84,
-0xb1, 0x57, 0xca, 0x26, 0xa4, 0x2b, 0xd0, 0xa4,
-0x6c, 0x4f, 0xb1, 0xbc, 0x46, 0x4b, 0x38, 0x16,
-0xc8, 0xe5, 0x3f, 0xa3, 0x9c, 0x86, 0x9f, 0xeb,
-0x8b, 0x52, 0x3c, 0xab, 0x73, 0x35, 0x31, 0x9b,
-0xe5, 0xec, 0xa9, 0xd9, 0x1a, 0xee, 0xa0, 0xa5,
-0x95, 0xc2, 0x28, 0xd4, 0x43, 0x80, 0x5a, 0xf6,
-0x34, 0xf2, 0x9f, 0x03, 0x8e, 0x2c, 0x68, 0xfa,
-0x3d, 0x2d, 0xfe, 0x52, 0xfe, 0xf3, 0x1c, 0x9f,
-0x89, 0x38, 0xa5, 0xee, 0x84, 0x4c, 0x31, 0x36,
-0x9a, 0xfa, 0x9d, 0x96, 0x94, 0x6b, 0x52, 0x19,
-0x31, 0x6b, 0x29, 0xd9, 0xac, 0x56, 0x26, 0x30,
-0xde, 0x66, 0x05, 0x7d, 0x5c, 0x8f, 0x58, 0x01,
-0x2c, 0xff, 0xe9, 0xe8, 0x74, 0xdc, 0x06, 0xc3,
-0x34, 0x93, 0x75, 0x76, 0xf2, 0xef, 0x99, 0xfa,
-0xbd, 0x6c, 0x8f, 0x0e, 0x47, 0xcb, 0xfe, 0x2e,
-0x2b, 0x5e, 0x45, 0xae, 0xf1, 0x5d, 0xe6, 0x83,
-0xfa, 0x3c, 0x15, 0xa6, 0xdf, 0x91, 0x76, 0x3a,
-0xaf, 0xf0, 0x61, 0xee, 0x18, 0xad, 0xaf, 0x76,
-0x75, 0xf2, 0x60, 0xe2, 0xa7, 0x77, 0xbb, 0x70,
-0x30, 0x5d, 0x37, 0xd9, 0xd3, 0xe9, 0xbb, 0x25,
-0xdd, 0x95, 0xa9, 0xf4, 0x23, 0x70, 0xd7, 0x18,
-0xba, 0x0a, 0xf5, 0xbb, 0x84, 0x73, 0x19, 0x16,
-0x1f, 0x27, 0xde, 0x48, 0x52, 0xae, 0x8c, 0xe3,
-0xa4, 0xcc, 0x71, 0x71, 0x61, 0x9b, 0xb4, 0x0f,
-0xea, 0xa6, 0x11, 0xaa, 0x98, 0xf3, 0x60, 0xd0,
-0x0a, 0x12, 0xd1, 0xe8, 0x1b, 0xd2, 0xe7, 0xf2,
-0x6a, 0x20, 0xb3, 0xb2, 0x16, 0x4e, 0xd0, 0xc1,
-0x94, 0x2b, 0xe3, 0x30, 0x73, 0x02, 0x49, 0xd0,
-0xf6, 0x0a, 0xc5, 0x7d, 0x34, 0x21, 0x5c, 0xa2,
-0x4d, 0xac, 0x61, 0xea, 0xf7, 0xb4, 0xa4, 0x95,
-0x40, 0x46, 0x9d, 0x33, 0x7c, 0x83, 0x7c, 0x1c,
-0xea, 0x87, 0x11, 0x3f, 0x47, 0x0d, 0xfc, 0xdc,
-0xa5, 0xeb, 0xf7, 0x71, 0x84, 0x4d, 0x8a, 0xf1,
-0x88, 0x11, 0x35, 0x32, 0x99, 0xcb, 0x7f, 0x0a,
-0x87, 0x85, 0xba, 0x61, 0x71, 0x10, 0xf1, 0x73,
-0x0b, 0xe7, 0xd3, 0x72, 0xa3, 0xb9, 0xfc, 0x27,
-0xdd, 0xe7, 0x0b, 0x14, 0xda, 0xdd, 0xa4, 0x3f,
-0xb9, 0x2b, 0x22, 0x83, 0xbf, 0x9e, 0x0c, 0x1b,
-0xfe, 0x49, 0x8b, 0x36, 0x28, 0x08, 0x8d, 0xef,
-0x3a, 0x3f, 0xae, 0xf2, 0x2b, 0xa3, 0xf1, 0xc1,
-0xb5, 0xab, 0x06, 0xab, 0xac, 0xfc, 0xe7, 0xb7,
-0xaf, 0xab, 0xb3, 0x72, 0xf8, 0x98, 0xab, 0xbe,
-0x5b, 0x55, 0xaf, 0xc7, 0xc3, 0x5f, 0x40, 0x20,
-0xb5, 0xf8, 0x67, 0xd9, 0x75, 0xd8, 0x80, 0xdb,
-0xbc, 0x68, 0x94, 0x0f, 0xb3, 0x78, 0x74, 0xbf,
-0x33, 0xa7, 0xdf, 0x55, 0xef, 0xac, 0xb0, 0x95,
-0xca, 0x8f, 0x38, 0x7a, 0x48, 0x40, 0x3e, 0x4c,
-0xeb, 0xa6, 0xed, 0x39, 0xfd, 0x3e, 0x6a, 0x7b,
-0x5d, 0xf4, 0xa3, 0x8d, 0x1c, 0x90, 0x70, 0x6e,
-0xd9, 0xa7, 0x73, 0x22, 0x4b, 0xbf, 0x73, 0x7b,
-0x98, 0x9b, 0x28, 0xc8, 0x0b, 0xf4, 0x18, 0x60,
-0xcf, 0xf8, 0x4c, 0x1e, 0x29, 0x21, 0xbe, 0x9c,
-0x83, 0x10, 0x9a, 0xca, 0xc1, 0xfa, 0x2a, 0x58,
-0x3d, 0x6e, 0xd4, 0xe2, 0x9f, 0x2f, 0x31, 0x9b,
-0x0d, 0x6b, 0xb1, 0x6a, 0x96, 0x2c, 0x9f, 0xce,
-0xcf, 0x7f, 0xc2, 0x1e, 0xe5, 0xcd, 0x92, 0x50,
-0x7a, 0xd5, 0x10, 0xcf, 0xea, 0x32, 0x8c, 0x43,
-0xf3, 0xa6, 0x7e, 0x3f, 0x63, 0x2b, 0x47, 0x7a,
-0xec, 0xcb, 0x22, 0x7e, 0x06, 0x90, 0x9b, 0xd6,
-0x4d, 0xcf, 0xe1, 0x9f, 0x0f, 0xd4, 0x64, 0x84,
-0x6a, 0xc9, 0x4f, 0xc9, 0x36, 0x09, 0xbd, 0xfa,
-0x72, 0x1e, 0xff, 0x9c, 0xe6, 0x2a, 0x60, 0x7b,
-0x7a, 0x41, 0xbb, 0x18, 0x2d, 0x60, 0xe0, 0x55,
-0x9b, 0xe5, 0x3b, 0x23, 0x9f, 0x18, 0x7d, 0x51,
-0xd1, 0xa9, 0x4c, 0xd3, 0xa5, 0x72, 0xa0, 0x87,
-0xdf, 0xae, 0xe2, 0xbb, 0x55, 0x5d, 0x4b, 0xf8,
-0xb7, 0x4c, 0xfd, 0x3e, 0xff, 0x29, 0xf8, 0x98,
-0xbb, 0x47, 0x71, 0xa9, 0x8e, 0x3f, 0x83, 0x0f,
-0x24, 0x2d, 0xcf, 0x60, 0xea, 0xf7, 0x01, 0x96,
-0x9f, 0x40, 0x9f, 0x98, 0xff, 0x22, 0x72, 0x53,
-0x23, 0xa6, 0x1e, 0x37, 0xf1, 0xb3, 0x64, 0xa7,
-0x70, 0x90, 0xd5, 0x8f, 0x36, 0xda, 0xad, 0x8d,
-0x71, 0x51, 0xd2, 0xd7, 0x47, 0xe1, 0x3b, 0x23,
-0x3f, 0x4e, 0xd6, 0xa6, 0xa3, 0x9d, 0xa4, 0x42,
-0x9b, 0x0b, 0xfa, 0xae, 0x6a, 0xf1, 0x4f, 0x2d,
-0xff, 0x39, 0x21, 0xde, 0x4d, 0x9c, 0xac, 0x91,
-0x9d, 0x53, 0x3f, 0xea, 0x81, 0xab, 0x42, 0x98,
-0xd6, 0xee, 0x21, 0xac, 0xb6, 0x1b, 0x1e, 0x70,
-0xe5, 0xeb, 0xf7, 0xac, 0x30, 0x43, 0x19, 0x6c,
-0x76, 0xc7, 0x2d, 0xfc, 0xcc, 0xe9, 0x77, 0xf2,
-0x73, 0x84, 0xcd, 0x55, 0xcf, 0xf3, 0x8c, 0x7f,
-0x36, 0x29, 0x81, 0x9b, 0xf8, 0x27, 0x57, 0x17,
-0x8b, 0xee, 0x24, 0x13, 0x02, 0x72, 0xcc, 0x87,
-0xc5, 0x39, 0xfc, 0x93, 0xfc, 0x80, 0xd6, 0x2a,
-0x85, 0xe3, 0xee, 0x11, 0x8d, 0x7f, 0xce, 0xc9,
-0x7f, 0x3a, 0xe9, 0x26, 0xa8, 0x8d, 0xfb, 0xd7,
-0x92, 0x91, 0x5b, 0x50, 0xc7, 0xcd, 0xc9, 0x7f,
-0x16, 0xc5, 0x61, 0x12, 0xc2, 0x9e, 0x55, 0xf7,
-0x7e, 0x1e, 0xf9, 0x27, 0x17, 0x06, 0x67, 0x8e,
-0x7f, 0x6a, 0xf5, 0x23, 0xb0, 0xea, 0x32, 0xcd,
-0xf9, 0xfc, 0xb3, 0xcf, 0x76, 0x99, 0xbc, 0x0e,
-0xf7, 0xb4, 0x39, 0xc7, 0x1d, 0xd5, 0xac, 0xef,
-0x7e, 0x04, 0xaf, 0x0b, 0xb9, 0xfa, 0x11, 0xca,
-0x76, 0xd4, 0xef, 0x04, 0x71, 0x07, 0x81, 0x94,
-0xe1, 0xa7, 0xa5, 0xdf, 0x6d, 0x23, 0x0a, 0xab,
-0x1f, 0xd9, 0xdd, 0x3e, 0x21, 0x8d, 0x40, 0xaa,
-0x14, 0xce, 0xe1, 0x9f, 0x25, 0x5b, 0x10, 0xe7,
-0x11, 0xde, 0xab, 0xb9, 0x43, 0xc6, 0x1a, 0x4c,
-0xfe, 0xc9, 0xea, 0x47, 0x42, 0xa3, 0x52, 0xc3,
-0x72, 0xbf, 0xc8, 0x3f, 0x5b, 0xbe, 0x8d, 0xf8,
-0x69, 0xf8, 0x75, 0x3b, 0xab, 0x1f, 0xe1, 0x3c,
-0x9d, 0x38, 0x4f, 0xe9, 0x8a, 0xd0, 0x14, 0xbd,
-0x99, 0x7f, 0x42, 0x98, 0xab, 0x65, 0xfc, 0x13,
-0x6d, 0x2d, 0x14, 0xe5, 0xf1, 0x4f, 0xae, 0x81,
-0x0c, 0xd3, 0xc5, 0xd4, 0x99, 0x25, 0x7e, 0xee,
-0x45, 0x6e, 0x31, 0x15, 0x6f, 0xe2, 0x9f, 0x29,
-0xb6, 0x7d, 0xec, 0x4e, 0x89, 0xbd, 0x5b, 0x7f,
-0x30, 0x32, 0x6c, 0xd5, 0x8f, 0x24, 0x94, 0x29,
-0x68, 0xeb, 0x18, 0x29, 0xa7, 0x07, 0x71, 0x0d,
-0x62, 0x07, 0x98, 0xfc, 0x73, 0x40, 0x2c, 0x86,
-0xd7, 0x68, 0x73, 0x3a, 0xd0, 0x7e, 0xfb, 0x1d,
-0xe8, 0x2f, 0xcb, 0x11, 0x3f, 0x2b, 0x2d, 0xfe,
-0x79, 0x2b, 0xd3, 0x6a, 0x61, 0xa5, 0x38, 0xcd,
-0x7f, 0x98, 0xbe, 0xc6, 0xce, 0x5d, 0x64, 0xe6,
-0xd4, 0xdf, 0xaf, 0xd1, 0xe6, 0x89, 0x00, 0xe2,
-0x27, 0xd3, 0xef, 0xd9, 0xa2, 0x7c, 0xfe, 0x99,
-0x81, 0xee, 0x3e, 0x0c, 0x35, 0x7d, 0xf6, 0x3a,
-0xd2, 0x4d, 0x6b, 0xdb, 0xc5, 0x3f, 0xe1, 0xcf,
-0x9b, 0x36, 0x83, 0x97, 0xe0, 0xfb, 0x25, 0xb5,
-0x3d, 0x3d, 0x8f, 0x90, 0x72, 0xf1, 0x9b, 0x72,
-0xed, 0xf1, 0xff, 0xb4, 0x31, 0xaf, 0xfe, 0x3e,
-0xc2, 0xd2, 0x90, 0xb1, 0x68, 0x5a, 0xab, 0x1f,
-0x05, 0xe4, 0x1e, 0xe6, 0x9f, 0x7a, 0x1f, 0xc3,
-0xcf, 0x0f, 0x28, 0xab, 0xfb, 0x3a, 0x9a, 0xe0,
-0x6d, 0xa1, 0x89, 0xe9, 0xb1, 0x1c, 0xff, 0x9c,
-0x64, 0xdb, 0x75, 0xd8, 0xf5, 0x1c, 0xf2, 0xcf,
-0x0f, 0x40, 0x23, 0x24, 0x7b, 0xcc, 0x1a, 0xa6,
-0xf4, 0x09, 0x9c, 0x92, 0xef, 0x4a, 0x6f, 0x9b,
-0xbe, 0x9d, 0xf1, 0x4f, 0xbc, 0xc1, 0x74, 0xa9,
-0xc5, 0x3f, 0x61, 0x15, 0xdb, 0xef, 0x13, 0xe2,
-0xfe, 0x52, 0x0d, 0x5f, 0x64, 0x3f, 0x6a, 0xf4,
-0x1c, 0x7e, 0x2a, 0xbd, 0xb0, 0x10, 0x21, 0x35,
-0xa1, 0x15, 0xb1, 0xb3, 0x22, 0x6a, 0x7b, 0xc3,
-0x9e, 0x76, 0x41, 0x84, 0x5e, 0x8f, 0xfc, 0x9a,
-0xdf, 0x93, 0xd8, 0x46, 0xf7, 0x31, 0xff, 0x0c,
-0x5a, 0xef, 0x01, 0xf1, 0x93, 0x9c, 0xa8, 0x5e,
-0xda, 0x13, 0x38, 0xc0, 0xbf, 0x24, 0x5c, 0x5b,
-0x17, 0x8e, 0xb6, 0x0d, 0xf2, 0xd9, 0x02, 0x43,
-0xbf, 0x7f, 0x1b, 0xb9, 0x70, 0x50, 0x83, 0x9c,
-0x40, 0x7c, 0xb6, 0x21, 0x2c, 0xac, 0xde, 0xdb,
-0x3a, 0xf9, 0x64, 0x5e, 0xfd, 0x88, 0x86, 0xd3,
-0xc8, 0x3f, 0xb3, 0xa8, 0xc4, 0x43, 0x59, 0x57,
-0x9e, 0x7e, 0x07, 0xe4, 0x9f, 0xdd, 0x75, 0xbb,
-0x1c, 0x43, 0xca, 0x05, 0xd8, 0x42, 0x77, 0x6b,
-0xf9, 0x4f, 0x21, 0x8f, 0x7f, 0xea, 0x35, 0xb7,
-0x31, 0x76, 0xb6, 0xe9, 0xe6, 0xfc, 0x27, 0x4e,
-0x3d, 0xa5, 0xd5, 0xc0, 0xb6, 0xfc, 0x72, 0xfe,
-0x13, 0x5f, 0x69, 0x46, 0x0b, 0x35, 0xea, 0xa8,
-0x56, 0x10, 0xca, 0xe6, 0xea, 0x47, 0x5a, 0xcc,
-0x71, 0x4c, 0x93, 0xeb, 0xc2, 0x4f, 0x52, 0xcd,
-0xea, 0xea, 0x9b, 0xeb, 0x47, 0xe1, 0x94, 0xc6,
-0xf5, 0x67, 0x94, 0x65, 0x5a, 0xcd, 0xdb, 0xd0,
-0xda, 0xaa, 0x2d, 0x60, 0xe6, 0x93, 0xc7, 0x18,
-0x39, 0xd2, 0x9e, 0x67, 0xf8, 0xd9, 0xa8, 0xe0,
-0x34, 0xe6, 0xe9, 0x56, 0xa5, 0x8c, 0x9e, 0x3b,
-0xbc, 0x0a, 0x26, 0xff, 0xac, 0x60, 0xfc, 0xd3,
-0x8f, 0xb2, 0xfd, 0x1d, 0x78, 0x89, 0xd5, 0xbc,
-0x9f, 0x20, 0xd7, 0x65, 0x7d, 0x5c, 0xd4, 0x5b,
-0x4c, 0x11, 0x36, 0x07, 0xbe, 0xd2, 0xd8, 0x7a,
-0x12, 0xa6, 0xfb, 0x97, 0x4e, 0xe5, 0xeb, 0xf7,
-0xf2, 0x3d, 0xec, 0x95, 0x26, 0x5d, 0x1f, 0xf1,
-0xd7, 0x5b, 0xa6, 0x19, 0x7e, 0x7e, 0xc4, 0x8f,
-0x3f, 0xa9, 0xcf, 0x13, 0xf9, 0xa7, 0xf8, 0x75,
-0xca, 0xe2, 0x43, 0x6b, 0x16, 0x1f, 0xa0, 0xd7,
-0xdf, 0xa9, 0x81, 0x9f, 0xac, 0x7e, 0x04, 0x95,
-0xb4, 0x97, 0x69, 0xa0, 0xfd, 0x28, 0x86, 0x7e,
-0x17, 0xf1, 0xb3, 0x5a, 0x1f, 0xa7, 0xf3, 0xcf,
-0xca, 0x34, 0xab, 0x65, 0xc1, 0x01, 0xbd, 0xfe,
-0x3e, 0xb7, 0x7e, 0x24, 0x0f, 0x6b, 0xb6, 0xce,
-0xe8, 0xb6, 0xb6, 0xf0, 0x13, 0x58, 0xfd, 0x68,
-0x5f, 0xca, 0x91, 0x46, 0x53, 0x7d, 0x92, 0x0e,
-0xcd, 0xa9, 0xbf, 0x1b, 0x9c, 0x68, 0x9e, 0x56,
-0x7f, 0x17, 0x1a, 0x6f, 0xae, 0x1f, 0xe5, 0x61,
-0xd6, 0x32, 0x65, 0x4e, 0xfd, 0x1d, 0x39, 0x26,
-0xa9, 0x6b, 0xd9, 0xce, 0xf4, 0xed, 0xde, 0x5f,
-0x59, 0x7f, 0x37, 0xb5, 0xef, 0xcd, 0xf5, 0x77,
-0xd8, 0x2b, 0x68, 0xa9, 0xc6, 0x11, 0x7a, 0x48,
-0x07, 0xa8, 0x5c, 0xfd, 0x48, 0x3f, 0x0b, 0x70,
-0x3b, 0x6d, 0x65, 0x0d, 0xb7, 0x96, 0xff, 0xe4,
-0x25, 0xa3, 0x4f, 0x83, 0x4d, 0xb5, 0x38, 0xc5,
-0x5f, 0x8e, 0xde, 0xd0, 0x27, 0x75, 0x71, 0x9e,
-0xbe, 0x86, 0x21, 0x1b, 0xcb, 0x8d, 0x86, 0x55,
-0x84, 0xcd, 0xcb, 0xf2, 0xeb, 0x28, 0xac, 0x8b,
-0x73, 0xdc, 0x54, 0xcb, 0x7f, 0x42, 0x1d, 0x2b,
-0xbb, 0x9f, 0x43, 0xb2, 0x5e, 0xc3, 0x0e, 0xd0,
-0xbc, 0x63, 0xe2, 0xa7, 0xc6, 0x3f, 0xeb, 0x18,
-0x6c, 0x1e, 0x05, 0x06, 0x96, 0x5a, 0xfe, 0xd3,
-0xaa, 0x1f, 0x49, 0x6c, 0x0d, 0xde, 0x94, 0xef,
-0x7d, 0xd8, 0x22, 0x6b, 0xc5, 0xb0, 0xbc, 0xfa,
-0x91, 0x78, 0xc5, 0x16, 0x8e, 0x3f, 0x95, 0x2a,
-0x9d, 0x90, 0x8e, 0xe8, 0xcf, 0xb3, 0xea, 0x47,
-0x31, 0xcd, 0x66, 0xf7, 0x9e, 0xd2, 0x6c, 0x46,
-0x7f, 0x45, 0xfd, 0x88, 0x1d, 0x71, 0xd0, 0xce,
-0x3a, 0x84, 0xf2, 0xf5, 0xbb, 0x28, 0xf8, 0xc5,
-0x17, 0x99, 0x0f, 0xa6, 0x23, 0xa3, 0xf0, 0x22,
-0xa9, 0x62, 0xfa, 0x3d, 0xbf, 0x7e, 0x64, 0x9e,
-0x63, 0x61, 0xb9, 0x6d, 0xb6, 0xa1, 0xf2, 0xea,
-0x47, 0x92, 0x11, 0x66, 0x51, 0x33, 0xc3, 0x02,
-0x8a, 0x8d, 0x49, 0x83, 0x7f, 0xb2, 0xfa, 0x91,
-0x51, 0x7f, 0x7f, 0x07, 0x1b, 0x77, 0xa6, 0xb1,
-0x71, 0x5e, 0x7f, 0x1c, 0x88, 0x45, 0x3a, 0xff,
-0xd4, 0xf6, 0xdf, 0x25, 0x68, 0x44, 0x67, 0x2c,
-0x1d, 0xf6, 0xe8, 0xf3, 0x8c, 0x0b, 0x9f, 0xc0,
-0xe1, 0xae, 0xdf, 0xc8, 0xce, 0x1b, 0xc2, 0x30,
-0x74, 0x2a, 0x15, 0xea, 0x77, 0x0e, 0xe5, 0xce,
-0x2f, 0xc1, 0xf6, 0x24, 0xca, 0xf6, 0xf7, 0x99,
-0x0f, 0x2a, 0xdd, 0x78, 0x4f, 0xd4, 0x40, 0xe7,
-0x8d, 0xb3, 0x46, 0x12, 0xec, 0x54, 0xf4, 0xb9,
-0x44, 0x5e, 0x6f, 0xdb, 0x01, 0xeb, 0x7a, 0xec,
-0x1d, 0x05, 0x23, 0x73, 0xe3, 0x3b, 0x5b, 0xc3,
-0x49, 0xe8, 0x56, 0xfa, 0x29, 0xea, 0xe2, 0x33,
-0x79, 0xf5, 0x23, 0xd4, 0x8d, 0x59, 0x6d, 0xdf,
-0x9e, 0x48, 0x85, 0x28, 0x62, 0xf9, 0x05, 0xc3,
-0xd6, 0x19, 0xbd, 0x7e, 0x34, 0xcc, 0xfa, 0xa2,
-0xd7, 0xa4, 0x30, 0xb5, 0xe5, 0xf8, 0x67, 0x97,
-0x74, 0xdd, 0x66, 0xc8, 0xf6, 0xb3, 0x70, 0x0a,
-0x75, 0x15, 0x2b, 0x2a, 0x9b, 0xf5, 0xa3, 0x24,
-0xf2, 0xcf, 0x82, 0x00, 0x93, 0xed, 0x53, 0x88,
-0xd7, 0xbb, 0xf1, 0x9e, 0x24, 0xaf, 0x7e, 0xc4,
-0xf8, 0x27, 0xa3, 0xa4, 0x53, 0xac, 0x16, 0x42,
-0xf3, 0xeb, 0xef, 0x18, 0xb4, 0xf7, 0x29, 0x48,
-0xe7, 0x42, 0x89, 0xb1, 0xd1, 0x5e, 0x31, 0xfd,
-0x4c, 0x9e, 0x7e, 0xa7, 0xde, 0x0d, 0xea, 0xe1,
-0x68, 0x78, 0x64, 0xd5, 0x41, 0xfe, 0x43, 0x7a,
-0x22, 0x1e, 0xea, 0x2b, 0xfe, 0xf1, 0xf7, 0xac,
-0xfa, 0xd1, 0xb7, 0xa7, 0x46, 0x70, 0xbf, 0x9f,
-0x61, 0xb5, 0x79, 0xf1, 0x92, 0x7f, 0x39, 0x2d,
-0xbe, 0x98, 0x57, 0x7f, 0xbf, 0x4c, 0x5e, 0x4d,
-0x35, 0x83, 0xf3, 0xbd, 0xee, 0x26, 0xe9, 0x94,
-0x96, 0x0f, 0xe1, 0xa7, 0x13, 0xfa, 0xfa, 0x54,
-0xe9, 0x43, 0xb9, 0x57, 0xc6, 0xb9, 0x24, 0xc9,
-0x62, 0x96, 0xff, 0xd4, 0xf0, 0x33, 0x61, 0xe2,
-0x67, 0x56, 0xed, 0x96, 0x03, 0x6a, 0x21, 0x90,
-0x2d, 0xa6, 0x7e, 0xbf, 0xc8, 0xe9, 0xf6, 0x54,
-0xcb, 0x58, 0x19, 0xa7, 0x6e, 0xda, 0x9f, 0xbe,
-0x3f, 0xcd, 0xf5, 0x6a, 0xc0, 0xe6, 0x9b, 0x36,
-0x6c, 0x4d, 0x3d, 0x54, 0x39, 0x91, 0x0a, 0x67,
-0x8b, 0xf6, 0x74, 0xbf, 0x40, 0x4e, 0xe8, 0xf9,
-0x64, 0xd5, 0xc8, 0xa3, 0x7c, 0x04, 0x2f, 0x88,
-0xb3, 0xec, 0x38, 0xd0, 0x5b, 0xfc, 0x13, 0x8a,
-0x51, 0x3f, 0x9a, 0x36, 0x73, 0xd4, 0x52, 0x3f,
-0x41, 0xd9, 0x3e, 0xee, 0xa4, 0xa5, 0x4e, 0xd6,
-0x60, 0xe3, 0xce, 0x9a, 0xfc, 0x53, 0x58, 0x3e,
-0x8a, 0xa6, 0x7a, 0x43, 0xfc, 0x6b, 0x14, 0xce,
-0xbd, 0xb0, 0x9b, 0x39, 0xce, 0x55, 0xdd, 0x2c,
-0xec, 0xfc, 0x27, 0x61, 0xf9, 0x25, 0xa4, 0x18,
-0xc5, 0xac, 0xd0, 0xa9, 0xd5, 0x8f, 0xa8, 0xde,
-0x97, 0xe1, 0x2a, 0x84, 0x1d, 0xb4, 0x72, 0x42,
-0x7c, 0xd3, 0x5e, 0x01, 0xdf, 0xd5, 0x31, 0xeb,
-0x63, 0xa3, 0xef, 0x7e, 0x91, 0x90, 0xbf, 0x23,
-0x41, 0x75, 0x55, 0xb0, 0x54, 0x84, 0xb7, 0xa5,
-0xe0, 0x11, 0xe4, 0x9f, 0xa6, 0x7e, 0x8f, 0xcc,
-0x1f, 0x52, 0x66, 0xa5, 0x97, 0xd5, 0xc5, 0x1d,
-0xfc, 0x99, 0xf8, 0x3f, 0x69, 0xf3, 0x2c, 0x1d,
-0x37, 0x63, 0xf8, 0x6f, 0x4d, 0xb2, 0xf3, 0x1a,
-0x6a, 0x45, 0xaa, 0xd4, 0x8f, 0x8d, 0x46, 0xbd,
-0x7e, 0xa4, 0xf7, 0x8d, 0x3e, 0xfd, 0x7c, 0x62,
-0x33, 0x59, 0xac, 0x16, 0xc5, 0x88, 0x9d, 0x6e,
-0x36, 0xf8, 0xa7, 0xc9, 0xf9, 0xe0, 0x9b, 0x0a,
-0x3b, 0xbf, 0x74, 0x7f, 0xc3, 0x6d, 0x15, 0xb0,
-0x99, 0x2e, 0xd2, 0xf8, 0xa7, 0x64, 0xfa, 0xe7,
-0xeb, 0xd0, 0x4d, 0x02, 0xd3, 0x62, 0x70, 0x77,
-0xb1, 0xc8, 0xc3, 0x06, 0x1d, 0x3f, 0xf5, 0xbe,
-0x49, 0xdb, 0x10, 0x1c, 0xa7, 0x77, 0x64, 0xec,
-0xd9, 0xaa, 0x7b, 0x0a, 0xee, 0x67, 0x7b, 0x25,
-0xcd, 0x5f, 0xb4, 0xf8, 0xa7, 0x2a, 0xcf, 0x48,
-0x61, 0x27, 0x6e, 0x65, 0x35, 0x6e, 0xe9, 0x77,
-0xd9, 0xf0, 0xa5, 0xf7, 0xe9, 0x31, 0xa2, 0x71,
-0xa9, 0x85, 0xc8, 0x3f, 0xeb, 0x34, 0xfc, 0x34,
-0xdf, 0x91, 0xf0, 0xfb, 0xf6, 0x2d, 0xf3, 0xd8,
-0xb1, 0x1e, 0xfb, 0x42, 0x33, 0xc7, 0x99, 0x35,
-0xd6, 0xee, 0x15, 0x16, 0xe0, 0x8f, 0x02, 0x5a,
-0x8d, 0x48, 0xb1, 0xf2, 0x9f, 0x60, 0xdc, 0x53,
-0x48, 0x68, 0xb4, 0xd3, 0x4d, 0xb4, 0xc6, 0x1c,
-0xfc, 0x14, 0xd7, 0x45, 0x46, 0xd7, 0x84, 0x3d,
-0x7d, 0x9b, 0xea, 0xad, 0xfc, 0xe0, 0xc7, 0xc4,
-0xc8, 0x7f, 0x16, 0xbd, 0x81, 0xb0, 0xd9, 0x3c,
-0x82, 0x61, 0xe8, 0xb2, 0x49, 0x44, 0xdf, 0x9b,
-0xa7, 0xfb, 0xa7, 0xc8, 0x7d, 0xac, 0x1e, 0x83,
-0x65, 0x6d, 0xce, 0x3e, 0xfe, 0x1b, 0x5a, 0x9e,
-0x81, 0x60, 0x1f, 0x31, 0xf3, 0x9f, 0x3f, 0x23,
-0x54, 0x0c, 0x08, 0xe2, 0x30, 0x72, 0xef, 0x9b,
-0xeb, 0x47, 0xb6, 0x11, 0x95, 0x4d, 0xa1, 0xe7,
-0xa1, 0x84, 0x0d, 0x76, 0xe9, 0x73, 0x79, 0xcb,
-0xe2, 0x9f, 0x7f, 0x0d, 0x3f, 0xa0, 0x75, 0x4a,
-0xcf, 0x69, 0x7b, 0x35, 0xfc, 0x40, 0x5b, 0x03,
-0x32, 0x05, 0xbd, 0x2f, 0xfd, 0x17, 0x13, 0xe4,
-0x18, 0x17, 0x6e, 0xf3, 0x3f, 0xc7, 0x2f, 0x20,
-0x7f, 0x00, 0xe1, 0x96, 0xef, 0xe4, 0xe7, 0x3f,
-0x93, 0xca, 0x9b, 0xd0, 0x14, 0x77, 0x79, 0xf9,
-0xa3, 0xf4, 0x4d, 0xed, 0x20, 0x53, 0xd5, 0x69,
-0x83, 0x83, 0x21, 0x7e, 0x26, 0xd8, 0xf9, 0x4f,
-0x27, 0x85, 0x4a, 0xa2, 0xaf, 0xaf, 0x6a, 0xd8,
-0xec, 0xc3, 0xd0, 0xb5, 0x95, 0xf3, 0x75, 0x21,
-0xed, 0xac, 0x41, 0x61, 0xd6, 0xa8, 0xe5, 0x3f,
-0xab, 0x75, 0xbb, 0xf8, 0x6d, 0x0f, 0x70, 0xa5,
-0xcc, 0x3f, 0x1b, 0xdc, 0xdb, 0x59, 0x7e, 0x5e,
-0xcf, 0x7f, 0xea, 0x57, 0x25, 0x57, 0xee, 0xdb,
-0x9c, 0xae, 0xa4, 0xfe, 0xf5, 0xe4, 0x29, 0xf8,
-0xbe, 0x76, 0xde, 0x2d, 0xa2, 0x2a, 0xc6, 0xb8,
-0x9e, 0x30, 0x79, 0x8d, 0x2e, 0xc9, 0x3a, 0x67,
-0x7a, 0xbf, 0x43, 0xfe, 0x37, 0x02, 0xe9, 0x6b,
-0x9d, 0x55, 0xc3, 0xb2, 0xf1, 0x1e, 0xe6, 0x23,
-0xff, 0x0c, 0x17, 0x53, 0xd7, 0xee, 0xd6, 0x0d,
-0xec, 0x5c, 0xa5, 0xa6, 0x81, 0x92, 0xc6, 0x3e,
-0xb2, 0x7d, 0x1c, 0x79, 0x1b, 0x69, 0x27, 0xda,
-0x33, 0x0c, 0xda, 0x7e, 0x1f, 0xaa, 0x1a, 0xdf,
-0xad, 0xf7, 0xfd, 0xa0, 0x64, 0x73, 0x7a, 0x33,
-0xad, 0xed, 0x11, 0xa3, 0x89, 0x72, 0x46, 0x7c,
-0xd5, 0x95, 0x4f, 0x90, 0xf3, 0x92, 0xe9, 0x9f,
-0x49, 0xcd, 0x65, 0xa3, 0x31, 0xf2, 0xb0, 0xfc,
-0x7d, 0xe6, 0xbb, 0x1b, 0xc9, 0x94, 0x95, 0xff,
-0x9c, 0x92, 0x7a, 0x21, 0x90, 0x11, 0x81, 0x7c,
-0x01, 0xb1, 0xc0, 0x89, 0x6b, 0x88, 0x98, 0xfe,
-0x39, 0x50, 0x36, 0x85, 0xf0, 0x57, 0xa7, 0xfa,
-0x97, 0x3a, 0x1e, 0x23, 0x1f, 0xa0, 0xde, 0x74,
-0x65, 0xbe, 0xf8, 0x9e, 0xe9, 0x67, 0x68, 0xfc,
-0x0f, 0x12, 0xe1, 0x27, 0xd1, 0x65, 0x11, 0x64,
-0x49, 0x58, 0xbd, 0x03, 0x85, 0xbc, 0xd1, 0xc7,
-0xc5, 0xae, 0x8b, 0xef, 0x72, 0x21, 0xfc, 0x51,
-0x77, 0x00, 0x4e, 0x69, 0x7b, 0x4c, 0xce, 0x1a,
-0xcf, 0x53, 0x85, 0xaf, 0xe2, 0xf3, 0x76, 0xa3,
-0x19, 0xed, 0x4e, 0x5c, 0x9f, 0x46, 0x9c, 0xa6,
-0x0d, 0xbb, 0x50, 0xa8, 0x86, 0xbf, 0x62, 0x14,
-0x2a, 0x45, 0x02, 0xb4, 0x57, 0x3b, 0x44, 0xe9,
-0x36, 0x7d, 0x57, 0x84, 0xea, 0x23, 0xdd, 0x10,
-0xa7, 0x9a, 0x2e, 0x7e, 0x56, 0xb3, 0xf5, 0x33,
-0xa6, 0x7f, 0x2a, 0xe2, 0x57, 0x07, 0xde, 0x85,
-0xd0, 0x11, 0x47, 0x0a, 0xf5, 0xad, 0x5e, 0x9f,
-0xe6, 0x4d, 0xde, 0xba, 0x7b, 0xfe, 0x14, 0xcc,
-0x4a, 0xcd, 0x5d, 0xae, 0x23, 0xfc, 0x65, 0xa3,
-0xae, 0xfd, 0x68, 0xb6, 0xd2, 0xd4, 0xda, 0x17,
-0x30, 0x7c, 0x0d, 0x9e, 0xab, 0x53, 0xf9, 0x10,
-0x1c, 0xe3, 0xea, 0xb3, 0x81, 0x99, 0xbc, 0xfa,
-0xd1, 0x05, 0x89, 0x95, 0xdd, 0x31, 0xbe, 0xa7,
-0x71, 0xd3, 0x1c, 0x40, 0x81, 0xac, 0x64, 0x21,
-0xc7, 0x3f, 0xd9, 0x51, 0x44, 0x3b, 0x52, 0x09,
-0xa9, 0xdb, 0xd6, 0x7e, 0x44, 0x0c, 0x16, 0xcc,
-0x39, 0xff, 0x49, 0x6b, 0x46, 0x06, 0x20, 0x42,
-0x9d, 0x5b, 0x68, 0x31, 0x12, 0xbf, 0x1c, 0xff,
-0x44, 0x7b, 0x5e, 0x3a, 0xd6, 0x78, 0x66, 0x7b,
-0xc6, 0xe1, 0x23, 0x47, 0x68, 0x03, 0x3b, 0xd0,
-0x69, 0xd6, 0x8f, 0xa6, 0x35, 0xfd, 0x7e, 0x50,
-0x5d, 0x7d, 0xbd, 0xfb, 0x17, 0xd2, 0x0d, 0xb8,
-0x4b, 0x3b, 0xff, 0x69, 0xd5, 0x8f, 0xd0, 0xc4,
-0xde, 0x90, 0xea, 0xdc, 0xef, 0xa8, 0x84, 0xb7,
-0xe5, 0xd0, 0xb0, 0x2b, 0x77, 0x7e, 0xe9, 0x8c,
-0x2d, 0x20, 0x1e, 0x52, 0x14, 0x8c, 0x39, 0x76,
-0x36, 0xcf, 0xd0, 0xf8, 0xca, 0x4c, 0xde, 0xf9,
-0xf9, 0x55, 0x30, 0x08, 0x69, 0x75, 0x91, 0x44,
-0x04, 0x78, 0xfa, 0xa1, 0x6d, 0x4c, 0xbf, 0x77,
-0x18, 0xf6, 0x64, 0xfa, 0xfd, 0x95, 0x74, 0x55,
-0xf6, 0xd6, 0xdb, 0x12, 0x07, 0x94, 0xcd, 0xbb,
-0x17, 0x4d, 0x3a, 0x66, 0x0a, 0xa2, 0x46, 0x5f,
-0x14, 0xf5, 0xd1, 0xc5, 0xb4, 0x9c, 0xbd, 0xf7,
-0x36, 0x87, 0x1d, 0xde, 0xa2, 0x4d, 0x59, 0xd7,
-0x8b, 0xfc, 0x1a, 0x4b, 0xbf, 0xef, 0x51, 0x5e,
-0x2c, 0x59, 0x3e, 0x56, 0xfc, 0x2c, 0x7f, 0xa6,
-0xed, 0x2a, 0x87, 0x5c, 0x78, 0x6f, 0xbe, 0x7e,
-0x17, 0xae, 0x32, 0x5c, 0xca, 0x38, 0x64, 0x78,
-0x1d, 0x06, 0xd5, 0xd5, 0x0d, 0xad, 0x24, 0xa7,
-0xdf, 0x3d, 0x2c, 0xff, 0x29, 0x4a, 0x05, 0x3b,
-0xdd, 0x9b, 0xf5, 0x64, 0xbc, 0xdb, 0xd2, 0x32,
-0xdf, 0x41, 0xda, 0xf9, 0xb5, 0x20, 0x74, 0x92,
-0x10, 0x74, 0xd3, 0x75, 0xd9, 0xdb, 0x3b, 0xad,
-0x1c, 0x12, 0x8b, 0xef, 0x83, 0x10, 0x58, 0xeb,
-0x3f, 0x44, 0x06, 0x8c, 0x62, 0x03, 0xb9, 0xcd,
-0xe4, 0x9f, 0x25, 0x03, 0xf0, 0x09, 0x34, 0x67,
-0x9c, 0x53, 0x8e, 0x7b, 0xe8, 0x49, 0xbd, 0x90,
-0xd4, 0x98, 0x57, 0x3f, 0xd2, 0x61, 0xb3, 0x3b,
-0x2b, 0xeb, 0x42, 0x9e, 0x9f, 0x53, 0x7f, 0x87,
-0x70, 0xfb, 0xaa, 0x3e, 0x9e, 0xe5, 0x3f, 0x1f,
-0x67, 0x40, 0x7a, 0xd3, 0xf9, 0x4f, 0xe5, 0x0f,
-0xfb, 0xe4, 0x6a, 0xa1, 0x4b, 0x68, 0x57, 0xc4,
-0x9b, 0xea, 0xef, 0x50, 0x17, 0x13, 0x0f, 0x90,
-0x00, 0xc1, 0xa0, 0x15, 0xbd, 0xf9, 0xfc, 0x12,
-0x45, 0xa8, 0x7a, 0x06, 0x6d, 0xdd, 0x85, 0xbc,
-0xce, 0x9f, 0x57, 0x7f, 0x2f, 0xd2, 0x53, 0x08,
-0xce, 0x4d, 0x8e, 0xca, 0xc8, 0xe8, 0x83, 0x3e,
-0x6e, 0xae, 0x7e, 0x87, 0xff, 0xc6, 0x2d, 0x57,
-0x5c, 0x3f, 0xe5, 0xdf, 0x80, 0x1b, 0x52, 0xb3,
-0xb2, 0x78, 0xae, 0x7e, 0x3f, 0x05, 0xac, 0xfe,
-0xde, 0x5b, 0x0d, 0x4f, 0x79, 0xeb, 0x95, 0xd5,
-0xe3, 0xfc, 0x49, 0x4b, 0xbf, 0xc7, 0x35, 0xd8,
-0xec, 0x49, 0x46, 0xfc, 0x64, 0xab, 0x5c, 0x73,
-0x13, 0x7e, 0xb2, 0x3c, 0x99, 0xd2, 0xee, 0x4e,
-0x08, 0xbb, 0xb6, 0xc8, 0x1a, 0x17, 0xce, 0xaf,
-0x1f, 0x6d, 0x81, 0x62, 0xc5, 0x9f, 0xd1, 0xce,
-0x59, 0xd5, 0x28, 0xb7, 0xcf, 0xd1, 0xef, 0xc2,
-0xb1, 0x3f, 0xaa, 0x88, 0x6c, 0x4b, 0x15, 0x2e,
-0x94, 0x8e, 0xc5, 0x06, 0x5b, 0x56, 0xe7, 0xe1,
-0x27, 0xd7, 0x4f, 0x0e, 0x31, 0xd8, 0x7c, 0xbe,
-0xea, 0x7d, 0xf8, 0x15, 0xf5, 0xa3, 0x19, 0x25,
-0x24, 0x39, 0xe9, 0x17, 0x71, 0xa1, 0xca, 0xa0,
-0xe0, 0xcc, 0x3f, 0xff, 0x29, 0x0a, 0x2f, 0xb7,
-0x2c, 0xda, 0x62, 0x9f, 0x70, 0xfb, 0xe1, 0x00,
-0x54, 0xa5, 0x0a, 0xe6, 0xea, 0xf7, 0xbd, 0xb2,
-0x9f, 0x8a, 0x83, 0x8c, 0x7f, 0x52, 0xf9, 0xf4,
-0x96, 0x5c, 0xfd, 0x28, 0xcd, 0x95, 0xc3, 0xc1,
-0xe4, 0x62, 0x6a, 0x8f, 0x93, 0xf2, 0xfb, 0xf6,
-0x8b, 0x95, 0xe7, 0xde, 0xca, 0xd5, 0xdf, 0x07,
-0xc4, 0x0a, 0xf8, 0x31, 0xbd, 0x3b, 0xbb, 0x6a,
-0x6d, 0xd5, 0x3b, 0xf0, 0xdf, 0xe9, 0xc6, 0xac,
-0xad, 0x93, 0xcf, 0xab, 0x1f, 0x31, 0xda, 0xa9,
-0x3a, 0xfe, 0x86, 0x9f, 0x92, 0x67, 0xc0, 0xc3,
-0xce, 0x87, 0xe4, 0xeb, 0xf7, 0xe7, 0xd2, 0x0d,
-0xfd, 0x5f, 0xf8, 0x09, 0xff, 0x58, 0xdb, 0x6b,
-0xcf, 0x86, 0x26, 0x9d, 0x0d, 0x2b, 0xbd, 0x26,
-0xd6, 0x71, 0xdf, 0x19, 0x19, 0x1c, 0xaf, 0x4c,
-0x8b, 0x35, 0xa4, 0x4e, 0x7e, 0x32, 0x2d, 0xf7,
-0xfb, 0x1b, 0xed, 0x35, 0x96, 0x7e, 0xdf, 0x09,
-0x7f, 0x21, 0x2e, 0x3a, 0xe3, 0x28, 0x21, 0xe5,
-0x9b, 0x76, 0x70, 0x9f, 0x57, 0x1d, 0x8f, 0x13,
-0x6a, 0xe6, 0x3f, 0x99, 0x7f, 0x72, 0xb2, 0x5a,
-0xb8, 0x88, 0x38, 0x0b, 0x12, 0xb0, 0x10, 0xd0,
-0x3f, 0x53, 0xa6, 0x7e, 0x2f, 0xd1, 0xce, 0xcd,
-0x8c, 0xef, 0x18, 0xa8, 0x59, 0x0e, 0xc7, 0xd3,
-0x07, 0x94, 0x3f, 0xcc, 0xf0, 0x2f, 0xe4, 0xce,
-0x7f, 0xc2, 0x95, 0xf5, 0x61, 0xb5, 0xb8, 0x1f,
-0xf1, 0x73, 0x46, 0x69, 0x54, 0xc4, 0x0c, 0xd7,
-0x6e, 0x9e, 0xa1, 0x93, 0xae, 0x73, 0x37, 0xa0,
-0x5e, 0x79, 0x20, 0x66, 0x6b, 0x92, 0x4f, 0xc2,
-0xe7, 0xe3, 0xce, 0xe9, 0x56, 0x35, 0xaf, 0x7e,
-0xb4, 0x57, 0x4d, 0x77, 0x6e, 0xef, 0xbf, 0x2d,
-0x00, 0x54, 0x59, 0x16, 0x2f, 0x9a, 0x7b, 0xfe,
-0xf3, 0x10, 0xf5, 0xc5, 0xa3, 0xec, 0x7b, 0x84,
-0x17, 0x94, 0xba, 0xa8, 0x88, 0xf8, 0x59, 0x62,
-0xf8, 0xa7, 0xc7, 0x09, 0x43, 0x1e, 0xdf, 0x4a,
-0x7b, 0x95, 0xfd, 0x29, 0x92, 0x40, 0xc7, 0xb9,
-0x35, 0x4f, 0xbf, 0xdb, 0x36, 0x28, 0x87, 0x94,
-0xd0, 0x5a, 0xe7, 0xe9, 0x82, 0x97, 0x92, 0xe7,
-0xe5, 0xf0, 0x1a, 0xe7, 0x01, 0x5e, 0x9d, 0x67,
-0xe8, 0xf7, 0x07, 0xa7, 0x94, 0x99, 0x78, 0x73,
-0xa4, 0xf8, 0xfd, 0xd2, 0x3f, 0x53, 0xae, 0x96,
-0xdf, 0x69, 0x77, 0x7d, 0x9c, 0x77, 0x7e, 0x7e,
-0x1a, 0x35, 0x60, 0x3d, 0xb8, 0x54, 0xbe, 0x03,
-0xc6, 0x58, 0x00, 0x1d, 0xe7, 0x83, 0x29, 0xe3,
-0xfc, 0x92, 0xf7, 0x3c, 0xf4, 0x50, 0x9f, 0xec,
-0xe8, 0x21, 0x3e, 0x6c, 0xd4, 0xc8, 0xf6, 0x3e,
-0x12, 0x34, 0x6b, 0xde, 0x90, 0x86, 0x5d, 0x44,
-0x86, 0x95, 0xe0, 0xd3, 0x41, 0xbf, 0x30, 0x48,
-0x42, 0xc6, 0x5e, 0x51, 0x85, 0x01, 0x3f, 0xca,
-0x76, 0x74, 0x67, 0x0c, 0x5e, 0xe8, 0xe0, 0x82,
-0x3d, 0xe3, 0x36, 0xc7, 0x71, 0x65, 0xe7, 0xd8,
-0xe7, 0x43, 0xf1, 0xd5, 0x19, 0xc7, 0x42, 0x72,
-0x8c, 0x2e, 0x8b, 0xa3, 0x9f, 0x81, 0x11, 0x57,
-0xb2, 0x5c, 0x1f, 0x7c, 0x0c, 0xcd, 0xeb, 0x11,
-0x36, 0x3f, 0x56, 0xfe, 0x39, 0xd5, 0x18, 0x77,
-0x29, 0x8e, 0x1c, 0xff, 0xdc, 0x25, 0x5f, 0xf3,
-0x84, 0x14, 0x67, 0x90, 0x17, 0x84, 0x37, 0x49,
-0x50, 0x09, 0xa4, 0x79, 0x8f, 0x75, 0x7e, 0xa9,
-0xa6, 0xaf, 0x37, 0xe1, 0x53, 0xc4, 0x21, 0x56,
-0xd3, 0x40, 0x4d, 0x89, 0x81, 0xbe, 0x91, 0x82,
-0x31, 0x97, 0x7b, 0x49, 0x86, 0xca, 0x54, 0xe4,
-0x50, 0xe1, 0x3d, 0x03, 0xd8, 0x90, 0x48, 0x83,
-0xd1, 0x17, 0x97, 0xbe, 0x0c, 0x94, 0xca, 0x69,
-0x51, 0x24, 0x2f, 0x8a, 0x09, 0xf6, 0xfd, 0x91,
-0xb7, 0x20, 0x9c, 0xd4, 0xfb, 0xa2, 0xe2, 0x0a,
-0xf8, 0x88, 0x06, 0x69, 0x80, 0x73, 0x0c, 0xc0,
-0x69, 0xc8, 0xa4, 0x9d, 0x4b, 0x1c, 0xb7, 0x99,
-0xfa, 0xbd, 0x6c, 0x9b, 0x7a, 0x45, 0x0e, 0x27,
-0xe7, 0x51, 0xae, 0x5d, 0xb9, 0x8a, 0xba, 0xc3,
-0x75, 0xa8, 0x75, 0xdc, 0xd2, 0x6a, 0xfd, 0xce,
-0x61, 0x08, 0x65, 0xd9, 0x67, 0x16, 0xec, 0xfb,
-0x23, 0x15, 0x31, 0x6b, 0xd8, 0x38, 0x03, 0x12,
-0x15, 0xb7, 0xc1, 0x93, 0xb0, 0x4b, 0x15, 0xf5,
-0xfa, 0x3b, 0xe2, 0xa7, 0x42, 0x4c, 0xae, 0x28,
-0xc3, 0x5f, 0x92, 0xcd, 0x7a, 0xd9, 0x08, 0x35,
-0x10, 0xe3, 0xc2, 0xed, 0x56, 0xfe, 0xb3, 0x5d,
-0xd8, 0x86, 0x3f, 0x92, 0xc7, 0xc5, 0x26, 0x56,
-0x7f, 0x57, 0xe4, 0x33, 0x8e, 0x7e, 0x0b, 0x0b,
-0x26, 0xcb, 0x46, 0xc9, 0x71, 0x94, 0xed, 0x81,
-0x17, 0xf8, 0x9f, 0xa3, 0xf0, 0x1b, 0x4c, 0xb9,
-0xb2, 0x39, 0xfe, 0xa9, 0xd7, 0x8f, 0x88, 0x8e,
-0x9f, 0x62, 0x13, 0xec, 0x50, 0xbb, 0x2d, 0xfe,
-0x89, 0x7c, 0xfe, 0x1c, 0xab, 0x33, 0xbb, 0xf9,
-0x6a, 0x0d, 0x0b, 0x56, 0xa5, 0x4a, 0x89, 0x64,
-0xbe, 0xbf, 0xf5, 0x9a, 0x19, 0x1d, 0x7d, 0x3e,
-0x5d, 0xac, 0x23, 0x46, 0xca, 0x46, 0xae, 0xa4,
-0xc1, 0xb6, 0x14, 0x7e, 0x28, 0x57, 0x29, 0x8e,
-0x71, 0xb2, 0x14, 0xd8, 0xf7, 0x47, 0xe2, 0x38,
-0x31, 0xb6, 0x2d, 0xf2, 0x2c, 0x0f, 0xdd, 0x24,
-0x57, 0x46, 0x1d, 0x6b, 0x88, 0x87, 0xfe, 0x58,
-0xae, 0x8d, 0x8a, 0xa7, 0xed, 0xe6, 0xf7, 0x47,
-0x33, 0xf3, 0x59, 0xfe, 0x93, 0xd5, 0xa7, 0x1d,
-0x5a, 0x7e, 0x10, 0xa3, 0x3f, 0xbf, 0xcc, 0x18,
-0xd7, 0x33, 0x7f, 0xe2, 0xa1, 0x2b, 0x9e, 0x70,
-0x9b, 0xeb, 0xe9, 0xd6, 0x89, 0x98, 0xde, 0xe0,
-0xdf, 0x13, 0x4c, 0xfc, 0x7c, 0x83, 0xbe, 0x2e,
-0x87, 0x23, 0xae, 0xd3, 0xdd, 0x13, 0x70, 0x9f,
-0xd8, 0x8c, 0x98, 0xd5, 0xed, 0x23, 0xb9, 0xfa,
-0xd1, 0x56, 0x46, 0x3b, 0x93, 0x91, 0x2c, 0xf3,
-0xb3, 0xb2, 0xde, 0x24, 0x79, 0xd2, 0xd2, 0xef,
-0x9b, 0xa0, 0xab, 0x2d, 0xa0, 0xf0, 0x12, 0x79,
-0xd5, 0xd3, 0xc5, 0x69, 0xfc, 0xf3, 0x36, 0x63,
-0xed, 0x7d, 0x42, 0x3f, 0xd1, 0xa9, 0x73, 0x44,
-0x3f, 0x43, 0xd0, 0x9b, 0x22, 0x3f, 0x32, 0xf9,
-0x27, 0xcb, 0x7f, 0xea, 0x47, 0x3b, 0xd9, 0x01,
-0x05, 0x6c, 0xf4, 0xf1, 0x7e, 0xcb, 0x9e, 0x49,
-0xe1, 0x0a, 0x67, 0xe5, 0x3c, 0xb0, 0xf1, 0x0c,
-0x6f, 0xf2, 0x4f, 0x56, 0x3f, 0x3a, 0xa3, 0x0c,
-0xb2, 0xb2, 0x11, 0x2e, 0x96, 0x60, 0xac, 0x02,
-0x9e, 0x98, 0xdf, 0x26, 0xd9, 0xee, 0x86, 0xad,
-0x5d, 0x3e, 0x2a, 0x0e, 0xb0, 0x1c, 0x35, 0xd4,
-0x51, 0x47, 0x96, 0x8f, 0x98, 0xfc, 0x53, 0xb8,
-0x8f, 0x3e, 0x9b, 0x42, 0xfe, 0x79, 0xb7, 0x4f,
-0xcb, 0x7f, 0xaa, 0x2b, 0x65, 0x62, 0x8e, 0xa3,
-0xd2, 0x5a, 0xd0, 0x7d, 0xa2, 0xa0, 0x9c, 0xd3,
-0xc4, 0xb3, 0x4c, 0x14, 0xc5, 0xb0, 0x59, 0xcf,
-0xef, 0xc0, 0xdf, 0xa3, 0x9b, 0x38, 0x3b, 0x1d,
-0x86, 0x90, 0x6f, 0xe7, 0xcd, 0xa3, 0x46, 0x62,
-0xd9, 0x80, 0x70, 0x8d, 0x43, 0x0a, 0x15, 0xe4,
-0xa7, 0xc4, 0x3f, 0xd5, 0xce, 0x55, 0x5a, 0xb9,
-0x6d, 0xc5, 0xf6, 0x42, 0xc4, 0x90, 0x99, 0x9f,
-0xc0, 0x6c, 0x6a, 0x79, 0x56, 0x9c, 0xe4, 0xc7,
-0x8d, 0x81, 0x2f, 0xdc, 0xba, 0x55, 0xdd, 0x2c,
-0x6b, 0x47, 0x93, 0xce, 0x6a, 0xf9, 0xf9, 0xbe,
-0x47, 0x42, 0xe7, 0x8d, 0xfd, 0x27, 0x41, 0x5f,
-0x6a, 0xb3, 0x50, 0xab, 0xf6, 0x76, 0x90, 0x87,
-0xe1, 0x60, 0x41, 0xad, 0x2a, 0xae, 0x77, 0x4f,
-0x50, 0xd3, 0x3f, 0xb7, 0x6a, 0x12, 0x74, 0xa5,
-0x9e, 0x83, 0x60, 0xdf, 0x1f, 0x85, 0x2c, 0x3d,
-0x56, 0xf6, 0xde, 0x02, 0x43, 0x66, 0x6e, 0xd0,
-0x92, 0x0a, 0xce, 0x3d, 0x7f, 0x67, 0xf2, 0xcf,
-0x14, 0x37, 0x80, 0x3f, 0x6a, 0xd2, 0xeb, 0xef,
-0x97, 0x70, 0xc2, 0x8b, 0xd3, 0xf3, 0xfe, 0xd1,
-0x7c, 0x0f, 0x52, 0x4a, 0x3a, 0x95, 0x46, 0xfd,
-0xde, 0xc1, 0x97, 0x3b, 0x4f, 0x91, 0x25, 0xaa,
-0x98, 0x2d, 0x9d, 0x34, 0xe6, 0xb2, 0x0b, 0x43,
-0x3a, 0xca, 0x61, 0xa6, 0xd1, 0x03, 0xc8, 0x3f,
-0x7d, 0x47, 0x8a, 0xd2, 0x6b, 0x66, 0xda, 0xf4,
-0xb5, 0xd3, 0x16, 0x39, 0xd8, 0x0b, 0xff, 0x45,
-0x8d, 0xee, 0x2d, 0x08, 0x68, 0x67, 0x19, 0xb5,
-0xf3, 0x9f, 0x86, 0x5d, 0x3c, 0x4e, 0x59, 0x3f,
-0xbe, 0x82, 0xbc, 0x15, 0xb5, 0xe8, 0x78, 0xaf,
-0xec, 0xce, 0xe5, 0x3f, 0xd7, 0x25, 0x7a, 0x95,
-0x46, 0x35, 0x90, 0xe1, 0x03, 0x02, 0x3b, 0x40,
-0x53, 0x9c, 0xe6, 0xcd, 0x9c, 0x40, 0xba, 0xec,
-0x6c, 0xfa, 0x86, 0x1f, 0x69, 0xe7, 0x38, 0xaf,
-0x7f, 0xd7, 0xf3, 0x54, 0x96, 0xcf, 0x26, 0x4d,
-0xfc, 0xbc, 0x00, 0x33, 0x05, 0xf5, 0xba, 0x3d,
-0xaf, 0x41, 0xbd, 0xea, 0xcc, 0xff, 0xfe, 0xe8,
-0x02, 0x0c, 0x15, 0xb0, 0x63, 0x9f, 0xca, 0x05,
-0x78, 0x85, 0x7e, 0x4f, 0x15, 0xe7, 0x7c, 0x7f,
-0x04, 0x19, 0xa2, 0x7d, 0x76, 0x34, 0xe6, 0x65,
-0x87, 0x67, 0xc5, 0xb9, 0xdf, 0x1f, 0x0d, 0xe9,
-0x32, 0x7a, 0x8a, 0x1d, 0x5e, 0x67, 0x0b, 0x9d,
-0x36, 0xf2, 0x36, 0x8c, 0x7f, 0xce, 0xe8, 0x69,
-0xcf, 0x29, 0xf1, 0x1a, 0x09, 0xb1, 0x09, 0xe7,
-0xd5, 0xdf, 0x3d, 0x9f, 0x1c, 0xd5, 0x8f, 0x7d,
-0x7a, 0xb5, 0xda, 0xcb, 0xdc, 0xfc, 0xe7, 0x01,
-0x39, 0x64, 0xd8, 0x1a, 0x79, 0x9d, 0x7f, 0x4e,
-0xfd, 0x1d, 0xdd, 0x52, 0x4b, 0x7b, 0x4e, 0x09,
-0x48, 0x28, 0x8f, 0x88, 0x99, 0x48, 0xde, 0xf9,
-0x25, 0x29, 0xa3, 0x68, 0x67, 0x7b, 0xf1, 0xdd,
-0x26, 0x31, 0x48, 0xe6, 0xbe, 0x3f, 0x8a, 0xb7,
-0x54, 0xc0, 0x81, 0xcc, 0x2e, 0x26, 0x95, 0xdf,
-0xa1, 0x07, 0x53, 0x95, 0x53, 0x85, 0xf9, 0xdf,
-0x1f, 0x15, 0xab, 0x57, 0xd2, 0xc1, 0xec, 0x8e,
-0x06, 0xfe, 0xa4, 0x72, 0x29, 0x15, 0xcc, 0x16,
-0xe5, 0x7f, 0x7f, 0xc4, 0xce, 0xcf, 0x37, 0x33,
-0xda, 0xa9, 0x25, 0x70, 0x8e, 0x14, 0xe7, 0x7f,
-0x7f, 0x84, 0x31, 0x55, 0x1c, 0x34, 0xce, 0x64,
-0xc8, 0xa1, 0xd1, 0x40, 0xfe, 0xf7, 0x47, 0xe5,
-0x82, 0x7e, 0xec, 0xd3, 0x7d, 0x56, 0x7c, 0x25,
-0xe6, 0x7f, 0x43, 0x9c, 0xf3, 0xfd, 0x11, 0x32,
-0x6f, 0x2d, 0x85, 0xf0, 0x0e, 0x92, 0xe2, 0x05,
-0x93, 0x22, 0xfb, 0xfe, 0x48, 0x5f, 0x9f, 0x96,
-0x5f, 0x3a, 0x22, 0x9b, 0x39, 0xb2, 0x3a, 0x66,
-0xeb, 0xfc, 0xef, 0x8f, 0xae, 0xd2, 0x90, 0x7e,
-0x7e, 0xe9, 0x22, 0x2c, 0x63, 0xf5, 0xf7, 0x39,
-0xdf, 0x1f, 0x55, 0x5a, 0xdf, 0x1f, 0xdd, 0x94,
-0xff, 0x9c, 0x80, 0x6b, 0xca, 0xa0, 0xb2, 0x3a,
-0xd5, 0x3a, 0xe1, 0xd1, 0xbf, 0xb3, 0x69, 0x9d,
-0xc3, 0x3f, 0x61, 0xb7, 0xf2, 0x57, 0x5a, 0x8e,
-0x53, 0x62, 0xe7, 0xe7, 0xf9, 0x74, 0x5e, 0xfe,
-0x73, 0x2f, 0xa9, 0x51, 0x56, 0x22, 0xf6, 0x70,
-0x87, 0x14, 0x8c, 0x55, 0xa9, 0x48, 0x3e, 0xff,
-0xdc, 0x27, 0x6b, 0xc7, 0x3e, 0x47, 0x90, 0x54,
-0xc9, 0x51, 0xe4, 0x9f, 0x89, 0xbc, 0xfa, 0xd1,
-0x74, 0x8c, 0x51, 0xc4, 0xd6, 0x2c, 0x74, 0x42,
-0xc8, 0xe3, 0xcc, 0xe5, 0x3f, 0xfb, 0xb4, 0xf3,
-0xf3, 0xcb, 0x10, 0xcf, 0x18, 0x2e, 0x49, 0xe1,
-0xb6, 0x1d, 0x29, 0xfe, 0x6f, 0x8c, 0xfc, 0x27,
-0xab, 0xbf, 0xdf, 0xf0, 0xb3, 0x73, 0x56, 0xd8,
-0x77, 0x43, 0xd4, 0x0e, 0x16, 0xe5, 0xbe, 0x3f,
-0xca, 0xc2, 0x50, 0x7c, 0x10, 0xef, 0xe9, 0x63,
-0x89, 0x50, 0xdf, 0xfc, 0xde, 0x39, 0xdf, 0x1f,
-0xc1, 0x5e, 0xa7, 0x46, 0x3b, 0x47, 0xa4, 0xbd,
-0x20, 0x47, 0x1c, 0x79, 0xdf, 0x1f, 0x21, 0xff,
-0x3c, 0x14, 0x5f, 0x38, 0x37, 0x87, 0x9b, 0xf7,
-0xfd, 0xd1, 0x15, 0x45, 0x3f, 0x2f, 0x25, 0x5c,
-0x81, 0x41, 0xed, 0xfc, 0xa7, 0xf5, 0xfd, 0x51,
-0x3f, 0x5c, 0x11, 0x1a, 0xf3, 0xf0, 0x93, 0x7d,
-0x7f, 0xa4, 0x8f, 0x33, 0xf8, 0xa7, 0x66, 0x6b,
-0xef, 0x8c, 0x26, 0xe4, 0xe7, 0x7c, 0x7f, 0xf4,
-0x72, 0x0f, 0xd3, 0x9b, 0xee, 0x49, 0x38, 0x90,
-0xf2, 0xd1, 0x9b, 0xea, 0xef, 0x87, 0xa9, 0xf1,
-0x6e, 0x07, 0xb1, 0xd1, 0x93, 0xcb, 0x7f, 0x32,
-0xfe, 0x79, 0xc0, 0x3c, 0x33, 0x74, 0x40, 0xac,
-0x9c, 0x14, 0x3b, 0xdc, 0x79, 0xdf, 0x1f, 0xc1,
-0x2c, 0x3b, 0xbf, 0xc4, 0xf2, 0x9f, 0x97, 0x92,
-0xf5, 0x33, 0x81, 0xce, 0x39, 0xe7, 0xe7, 0xaf,
-0x02, 0x3b, 0x4e, 0xa9, 0xf9, 0xe7, 0xcb, 0x6f,
-0xcd, 0x39, 0xbf, 0x74, 0x01, 0x6e, 0xd0, 0x30,
-0xee, 0xf7, 0x79, 0xfa, 0xf7, 0x86, 0xb8, 0xdf,
-0xf3, 0xbe, 0x3f, 0xa2, 0xfb, 0xd3, 0x81, 0x49,
-0x47, 0xe3, 0x2d, 0x27, 0xe1, 0x60, 0x56, 0x9e,
-0x14, 0x1b, 0xad, 0x6f, 0x85, 0x90, 0x7f, 0xd2,
-0x83, 0x0c, 0x5b, 0x1f, 0x77, 0x9f, 0xa5, 0x07,
-0x25, 0x79, 0x54, 0x7c, 0xdc, 0x8a, 0xef, 0x1a,
-0xff, 0xa4, 0x7a, 0x0e, 0x57, 0x60, 0x07, 0x84,
-0xe6, 0x7c, 0x7f, 0xb4, 0x87, 0x1d, 0x01, 0xd0,
-0xf7, 0xfb, 0x47, 0xb0, 0x8f, 0xed, 0x77, 0xf3,
-0x9e, 0x29, 0xe4, 0x9f, 0x48, 0x3f, 0x8c, 0xbd,
-0xd2, 0xc2, 0x3e, 0x4a, 0xb4, 0xf2, 0x9f, 0x94,
-0xd5, 0xdf, 0x49, 0xbd, 0x71, 0xee, 0x89, 0xe1,
-0xd2, 0xdc, 0xef, 0x8f, 0x5e, 0x54, 0x7c, 0x47,
-0x7a, 0x33, 0xbe, 0x29, 0xe1, 0xb0, 0xca, 0xea,
-0xef, 0xbe, 0x7c, 0xfe, 0x99, 0x51, 0x16, 0x1a,
-0xd8, 0x43, 0x65, 0x75, 0x6e, 0xfd, 0x5d, 0xcd,
-0x04, 0xe5, 0x31, 0x76, 0xe6, 0xb2, 0x6b, 0x5f,
-0x95, 0x3c, 0x3a, 0x19, 0xb4, 0xce, 0xcf, 0xd3,
-0xa2, 0x0d, 0xe9, 0x6b, 0x10, 0x1a, 0x75, 0x1d,
-0xec, 0xfe, 0x30, 0x73, 0xcd, 0x5d, 0x3f, 0xee,
-0x3c, 0x58, 0x6a, 0xd5, 0xdf, 0xe7, 0x5f, 0x4f,
-0x5e, 0x8d, 0x37, 0x8f, 0x9d, 0x1a, 0x6c, 0x9d,
-0x4a, 0xcf, 0x06, 0xc3, 0x27, 0x5d, 0x83, 0x56,
-0xfe, 0x13, 0xd4, 0x16, 0x5b, 0x87, 0x72, 0x56,
-0xfa, 0x9c, 0x60, 0x7b, 0x95, 0xdb, 0xb8, 0xe5,
-0xe1, 0xe8, 0x97, 0x84, 0xf9, 0xaa, 0x3e, 0x4d,
-0x80, 0x57, 0xdb, 0x6c, 0x1b, 0x61, 0x55, 0xcb,
-0xe7, 0xa4, 0xb2, 0xa3, 0x05, 0x72, 0xb0, 0x7c,
-0x55, 0x95, 0x64, 0x53, 0x97, 0xc4, 0x8c, 0x71,
-0x11, 0x0e, 0xc9, 0x9c, 0xec, 0x16, 0x85, 0x27,
-0x5b, 0xe4, 0xfd, 0xd1, 0x0d, 0x44, 0x14, 0xa8,
-0x71, 0xde, 0x14, 0xf9, 0x28, 0x2a, 0xc8, 0xb5,
-0x70, 0x0b, 0xd8, 0x68, 0x65, 0x47, 0x61, 0xd4,
-0xee, 0x96, 0x6d, 0xd4, 0xba, 0x67, 0x94, 0x7b,
-0x1c, 0x1e, 0xa6, 0x9f, 0x93, 0x6d, 0xa3, 0x9b,
-0xfe, 0xb8, 0xe1, 0xbe, 0xa5, 0xee, 0xf5, 0x1e,
-0x6a, 0xde, 0xf3, 0xd5, 0x18, 0xc4, 0x39, 0x2f,
-0xac, 0x80, 0x12, 0x0a, 0xf1, 0x07, 0x45, 0x21,
-0xc2, 0x01, 0x5d, 0x62, 0x8e, 0x53, 0x40, 0xe6,
-0x44, 0x88, 0x80, 0x44, 0x85, 0x2a, 0x4e, 0xa4,
-0xac, 0x61, 0xf5, 0x7d, 0xb1, 0x4c, 0xe9, 0x8a,
-0xc9, 0x0f, 0x89, 0x65, 0x3c, 0x17, 0xc9, 0x2a,
-0x93, 0x92, 0xb7, 0x0c, 0x4a, 0x8c, 0x7b, 0x52,
-0x27, 0xf7, 0x39, 0x68, 0x51, 0xa5, 0x0e, 0xc1,
-0xc9, 0xdd, 0x29, 0xb7, 0xac, 0x95, 0xbe, 0x21,
-0x40, 0xa5, 0x31, 0x8e, 0x2a, 0x02, 0x9b, 0x31,
-0xb3, 0xae, 0x70, 0x2b, 0x67, 0x8f, 0x22, 0x41,
-0xe5, 0x8c, 0xfa, 0x11, 0xbc, 0x1a, 0x27, 0x5e,
-0x2e, 0x81, 0xbf, 0x83, 0xce, 0xee, 0x05, 0x22,
-0x41, 0xd2, 0xcb, 0x99, 0xf3, 0x3c, 0x12, 0xe3,
-0xd6, 0xc3, 0x7d, 0xb0, 0x46, 0x29, 0xa7, 0xb6,
-0xf5, 0xdc, 0x7d, 0xa8, 0x7e, 0x1f, 0xa2, 0xe6,
-0x3d, 0x5f, 0x85, 0x42, 0xb6, 0xf6, 0x65, 0x50,
-0x44, 0x39, 0x56, 0x2e, 0x5d, 0x83, 0x46, 0xb0,
-0xe6, 0x19, 0x29, 0x08, 0x76, 0x39, 0x65, 0x5e,
-0x04, 0x74, 0x67, 0x34, 0x1e, 0xd2, 0x11, 0xcb,
-0x9e, 0x49, 0x31, 0x16, 0x62, 0xa2, 0x8f, 0x65,
-0x07, 0x65, 0x41, 0x64, 0x7f, 0x23, 0x41, 0xb5,
-0xec, 0xe9, 0xe0, 0x42, 0xea, 0x2a, 0x2d, 0x32,
-0x72, 0x41, 0x1a, 0x45, 0xa3, 0xb7, 0xa9, 0xb2,
-0x79, 0xcf, 0xd6, 0x05, 0x71, 0x35, 0x1a, 0xbc,
-0xc5, 0x29, 0x74, 0xdb, 0x3a, 0xb4, 0x3e, 0x5b,
-0xce, 0x9e, 0x11, 0x78, 0xbc, 0x4b, 0x94, 0x57,
-0xf8, 0x25, 0xb4, 0x27, 0xa0, 0xf1, 0xc4, 0x3c,
-0x9b, 0xad, 0x11, 0x16, 0x76, 0x15, 0xa6, 0x23,
-0xed, 0xd2, 0xf3, 0x42, 0x35, 0x2d, 0x0c, 0x46,
-0xa2, 0x79, 0x7d, 0xf8, 0x16, 0xb8, 0x08, 0xc4,
-0xa8, 0x47, 0x36, 0x1b, 0x60, 0xde, 0x93, 0x16,
-0x70, 0x2d, 0x34, 0x16, 0xf7, 0x78, 0x6d, 0x05,
-0xdc, 0x7d, 0x94, 0xc4, 0x25, 0xaf, 0x79, 0x02,
-0x19, 0xfb, 0xdc, 0x36, 0x01, 0x09, 0x80, 0x14,
-0x15, 0x9e, 0x31, 0x1a, 0xa6, 0x44, 0xc0, 0x7b,
-0xae, 0xe0, 0x1f, 0xa4, 0x6f, 0xc4, 0xff, 0xd8,
-0x3b, 0x9f, 0x35, 0x70, 0x3a, 0x5e, 0x50, 0xac,
-0x79, 0xae, 0x28, 0xdc, 0xd8, 0x75, 0x36, 0xfe,
-0x25, 0x6f, 0xd9, 0x51, 0x5b, 0x47, 0xd7, 0xc3,
-0xf2, 0x7f, 0xf5, 0x96, 0x59, 0x73, 0xb9, 0x37,
-0xc2, 0x6d, 0xa4, 0x67, 0xe3, 0x77, 0x79, 0x8b,
-0x8e, 0x72, 0x1d, 0xf4, 0x6c, 0xe5, 0x5d, 0xe2,
-0x7c, 0xb5, 0xc4, 0xec, 0x5b, 0x51, 0xb0, 0x84,
-0x3a, 0xe3, 0xf3, 0xbc, 0xca, 0xd1, 0x82, 0x3f,
-0xa6, 0x45, 0xf1, 0x2a, 0xaf, 0x48, 0xcd, 0xf7,
-0x0e, 0x84, 0x7b, 0x84, 0xf9, 0xa7, 0x1f, 0xb6,
-0xa2, 0xa3, 0x3a, 0xe5, 0x5b, 0xd0, 0x3f, 0x8d,
-0x7d, 0x04, 0x50, 0xc0, 0x55, 0x25, 0xa3, 0xd3,
-0xee, 0x06, 0x61, 0x3b, 0x57, 0x49, 0xd7, 0xc6,
-0xdd, 0x5e, 0xec, 0x33, 0xef, 0xa9, 0x94, 0x75,
-0xc0, 0x2a, 0x28, 0x05, 0x41, 0xb5, 0x75, 0xc8,
-0x51, 0xc2, 0x1a, 0xe6, 0x3d, 0xef, 0x8d, 0x40,
-0x1c, 0xed, 0x89, 0x66, 0x4c, 0x40, 0x3c, 0x2d,
-0xfa, 0x89, 0x5d, 0xa2, 0xd6, 0x5c, 0x22, 0x82,
-0xdc, 0xe5, 0x95, 0x57, 0x88, 0x25, 0x09, 0x01,
-0x37, 0x06, 0xf6, 0x95, 0xe4, 0xf5, 0x55, 0x2a,
-0x47, 0x1e, 0x0a, 0xde, 0xeb, 0x2c, 0x8b, 0x70,
-0x4a, 0x97, 0x22, 0xbb, 0x9d, 0x36, 0x25, 0x6f,
-0x9e, 0x31, 0xfa, 0x90, 0x5c, 0x26, 0xda, 0x22,
-0xd8, 0x50, 0xe4, 0x12, 0x71, 0x93, 0x39, 0x4b,
-0x96, 0xb1, 0x53, 0x30, 0x6e, 0x15, 0x40, 0x8b,
-0x28, 0x20, 0x3e, 0x08, 0xc0, 0x71, 0x56, 0xd7,
-0xbd, 0x11, 0x22, 0x77, 0x51, 0x39, 0x2e, 0x7a,
-0xdd, 0x09, 0x61, 0x80, 0x5b, 0x08, 0xa2, 0xd7,
-0xf2, 0xf9, 0x7b, 0x95, 0x79, 0x71, 0x65, 0x2d,
-0xfc, 0xb6, 0x50, 0xd6, 0x75, 0x6f, 0xbc, 0x04,
-0x35, 0x29, 0x94, 0x59, 0x73, 0x79, 0x55, 0xe1,
-0x82, 0xa0, 0x67, 0x6a, 0x5b, 0x64, 0xf9, 0x4c,
-0xd1, 0x2d, 0x50, 0x6e, 0xad, 0x1d, 0x0d, 0x83,
-0xaf, 0x8b, 0xa2, 0xeb, 0xf5, 0x2c, 0x94, 0xfd,
-0x62, 0x41, 0x81, 0x00, 0xb9, 0x3e, 0x89, 0x89,
-0x4c, 0x20, 0x0a, 0xc2, 0xde, 0x02, 0xa9, 0x30,
-0x4e, 0x62, 0x79, 0x7d, 0x02, 0xb7, 0x04, 0xa2,
-0x8a, 0x5b, 0x12, 0xfa, 0xb9, 0x45, 0x70, 0xbf,
-0x52, 0x5a, 0xee, 0x51, 0xad, 0xbe, 0x2a, 0x5b,
-0xbb, 0xfa, 0x3b, 0xc1, 0x5b, 0xb6, 0xd9, 0x76,
-0xdb, 0xda, 0xe9, 0xfd, 0x71, 0xf7, 0xce, 0x92,
-0x39, 0xf7, 0xe4, 0x0a, 0x21, 0xa2, 0x48, 0x29,
-0xb8, 0x53, 0xd1, 0x6e, 0x9e, 0xeb, 0x13, 0x85,
-0x78, 0x89, 0x57, 0x58, 0xc1, 0x95, 0xf4, 0xb4,
-0x05, 0x25, 0xb1, 0x80, 0x70, 0x4f, 0xe7, 0xcd,
-0xb3, 0x25, 0x56, 0xe2, 0x11, 0x7e, 0x8b, 0x2b,
-0x53, 0x5a, 0xa4, 0x12, 0x45, 0x78, 0x90, 0xb3,
-0xe5, 0xd9, 0xac, 0x32, 0x22, 0x3e, 0x94, 0x28,
-0x93, 0x37, 0x45, 0x2b, 0x23, 0x7e, 0x05, 0x1b,
-0xc9, 0xdc, 0x30, 0x3b, 0x47, 0xa8, 0x92, 0x96,
-0xfc, 0x60, 0x5f, 0x80, 0x8d, 0xdd, 0x8a, 0x3f,
-0xd7, 0x05, 0x4e, 0xfe, 0x41, 0xee, 0x39, 0x15,
-0xfd, 0xb9, 0x8d, 0xff, 0x22, 0xcb, 0x6b, 0x06,
-0xbd, 0x79, 0xf7, 0x9c, 0x87, 0x98, 0x05, 0x5f,
-0x92, 0xcb, 0x46, 0x6d, 0x8f, 0x97, 0x3c, 0x9c,
-0xf8, 0x92, 0xaf, 0x2c, 0xb7, 0x3e, 0x94, 0xcf,
-0xaa, 0x14, 0x44, 0x74, 0xa9, 0x32, 0x1b, 0xb9,
-0x7b, 0x36, 0xcf, 0xae, 0x9e, 0xfd, 0xfb, 0xd9,
-0xcb, 0xb3, 0x37, 0xac, 0x06, 0xfc, 0xab, 0xae,
-0x65, 0x6f, 0x3b, 0x96, 0x0d, 0xbf, 0x9e, 0xd9,
-0xb7, 0x21, 0xf0, 0xae, 0x3e, 0x6e, 0x2a, 0xd7,
-0xf7, 0xf9, 0xa6, 0x55, 0xa7, 0x4a, 0xeb, 0x47,
-0xc6, 0x3e, 0xaa, 0x6f, 0xd6, 0xfb, 0x3e, 0xca,
-0x7b, 0x9e, 0x37, 0x7a, 0xd4, 0xbd, 0x24, 0xb9,
-0x6d, 0xdd, 0x3d, 0x66, 0x23, 0xd7, 0x67, 0x23,
-0x1b, 0x95, 0x9d, 0xb1, 0x79, 0x9e, 0xc2, 0x57,
-0x59, 0xa3, 0xe3, 0x2e, 0x4f, 0x61, 0x6e, 0x0d,
-0xc2, 0xbc, 0x8d, 0xdc, 0xc3, 0xb8, 0xff, 0x6c,
-0x23, 0x1c, 0x36, 0xf0, 0x45, 0x96, 0xe4, 0xfa,
-0x0a, 0x70, 0xfb, 0x44, 0x81, 0xe1, 0x3c, 0xee,
-0x95, 0xe8, 0x9c, 0xbd, 0x82, 0x20, 0xb5, 0x0e,
-0xf7, 0xf1, 0x0a, 0x89, 0xd3, 0x37, 0x74, 0x01,
-0xe4, 0xb0, 0x00, 0xdf, 0xdf, 0xe3, 0xe8, 0x5a,
-0xbf, 0x29, 0x73, 0xa3, 0x08, 0x42, 0xe5, 0xb4,
-0xd4, 0x9f, 0x77, 0x4f, 0x80, 0x75, 0x1c, 0xfb,
-0x75, 0xdc, 0x2b, 0x6c, 0xdc, 0x0a, 0xe0, 0x72,
-0xf7, 0xf4, 0x08, 0x0b, 0xba, 0x34, 0x9f, 0x78,
-0x4e, 0x58, 0xc8, 0x15, 0x2a, 0x91, 0x3f, 0x92,
-0x72, 0x7d, 0x55, 0x10, 0xed, 0x72, 0x83, 0xd0,
-0x57, 0xe2, 0x13, 0xee, 0xe7, 0xdc, 0xf2, 0xbd,
-0x03, 0x25, 0xd6, 0xd3, 0x54, 0x27, 0xee, 0x59,
-0x94, 0x03, 0x0d, 0xe0, 0x04, 0x9e, 0x22, 0x1f,
-0x0d, 0x72, 0x46, 0x48, 0xc5, 0x9f, 0xde, 0x02,
-0x65, 0xc0, 0x65, 0x85, 0x98, 0x72, 0x8b, 0x64,
-0x63, 0xb1, 0x29, 0xc6, 0x19, 0x61, 0x1a, 0xc7,
-0x29, 0x88, 0xed, 0x2c, 0x13, 0xc5, 0xe6, 0x03,
-0x3a, 0x4e, 0xe6, 0xfa, 0x84, 0x38, 0xc6, 0x9c,
-0xdf, 0x63, 0x31, 0x47, 0x0f, 0x3e, 0x25, 0x66,
-0x1c, 0x93, 0x38, 0xc5, 0x13, 0xb7, 0x79, 0x69,
-0x01, 0x14, 0xb2, 0x31, 0x7d, 0xf8, 0x4b, 0x85,
-0x09, 0xe3, 0x71, 0x0a, 0x62, 0x81, 0xd4, 0xb5,
-0x4d, 0x6e, 0x15, 0x25, 0xa4, 0xa4, 0x1a, 0xe0,
-0x4b, 0x26, 0x86, 0x28, 0x78, 0xfb, 0x10, 0x9b,
-0x22, 0xc3, 0xf9, 0x20, 0x63, 0x59, 0x8c, 0x3b,
-0x1b, 0xe3, 0x14, 0x07, 0x84, 0x54, 0x67, 0xb0,
-0x95, 0x65, 0xe0, 0x83, 0xd4, 0x99, 0x69, 0x15,
-0x8d, 0xbf, 0xd2, 0xc3, 0xee, 0xd9, 0x0a, 0x1d,
-0x48, 0x4c, 0x7e, 0x5b, 0xfb, 0x0b, 0x28, 0x5d,
-0xde, 0x20, 0x02, 0x0d, 0xb5, 0xee, 0x89, 0xb8,
-0x84, 0x58, 0x87, 0x8f, 0xd1, 0xb0, 0x47, 0x26,
-0xa2, 0xb5, 0x8f, 0x62, 0x08, 0xdf, 0xec, 0x47,
-0x2b, 0xb4, 0x3e, 0x04, 0xa8, 0x88, 0x68, 0xed,
-0x3f, 0xe5, 0x5e, 0x3d, 0xfe, 0x71, 0xa0, 0x61,
-0x8b, 0x07, 0x9b, 0x0f, 0x46, 0x8c, 0x7b, 0x46,
-0x19, 0xea, 0x50, 0x29, 0x2e, 0x78, 0x39, 0xbd,
-0x21, 0x79, 0x2d, 0xbf, 0x8e, 0x2a, 0xc4, 0x06,
-0x08, 0x63, 0x92, 0x28, 0x60, 0x83, 0x6a, 0x0d,
-0xb0, 0xe6, 0xa9, 0xe3, 0xfc, 0x9d, 0xde, 0x22,
-0xd6, 0x18, 0x89, 0x7f, 0xd5, 0x5b, 0x94, 0xc3,
-0xba, 0x15, 0xb0, 0xb1, 0xab, 0x3c, 0xfe, 0xfb,
-0xde, 0x92, 0xa3, 0xc2, 0xc6, 0xae, 0x55, 0xf1,
-0xdf, 0xf4, 0x5a, 0x3e, 0xa1, 0x70, 0x2b, 0x60,
-0x09, 0xdd, 0x19, 0xff, 0x9c, 0xf7, 0xd6, 0xa3,
-0x05, 0x1b, 0xbb, 0x76, 0xc6, 0x3f, 0xef, 0xb5,
-0xfc, 0x33, 0xa6, 0xe1, 0xbc, 0x88, 0xbf, 0x1e,
-0x3d, 0x0a, 0x4b, 0xba, 0x1e, 0xc6, 0xc8, 0x5c,
-0x36, 0x6c, 0xae, 0x9d, 0x73, 0x73, 0xd5, 0xf4,
-0x3e, 0xb9, 0x94, 0x05, 0x6f, 0xd6, 0x70, 0x47,
-0x05, 0x13, 0xe7, 0x15, 0x5c, 0x43, 0x25, 0x8e,
-0x5b, 0xe1, 0x85, 0x27, 0xa1, 0xb2, 0xcb, 0xcb,
-0x22, 0x3a, 0x35, 0xbe, 0x2f, 0x86, 0x7b, 0xe3,
-0x42, 0x27, 0x14, 0xc3, 0x6f, 0x52, 0x29, 0x2b,
-0x34, 0x70, 0xc5, 0xe8, 0x33, 0xb9, 0x77, 0xc4,
-0xad, 0x81, 0xf5, 0x5d, 0x85, 0x72, 0x81, 0x7e,
-0xcf, 0x42, 0x39, 0x12, 0x45, 0x3e, 0x67, 0xcc,
-0xd3, 0x46, 0x4c, 0x33, 0x26, 0x84, 0x47, 0x74,
-0xc0, 0xb7, 0xfa, 0x30, 0x3e, 0x28, 0x47, 0x3c,
-0x32, 0x42, 0x40, 0xab, 0x10, 0x53, 0x3d, 0x08,
-0xf8, 0x25, 0x4a, 0xde, 0x3b, 0xc2, 0x30, 0x1a,
-0xb4, 0x89, 0xf8, 0x42, 0xd6, 0x60, 0x60, 0xb5,
-0x39, 0xd1, 0x3f, 0x8d, 0x3e, 0x41, 0xc3, 0x79,
-0xaa, 0x19, 0x51, 0xd1, 0x5f, 0x86, 0x69, 0x6b,
-0xbc, 0x27, 0x01, 0xc4, 0x79, 0x59, 0xf4, 0x92,
-0x02, 0x99, 0x22, 0xe0, 0xfb, 0x45, 0xb0, 0xe6,
-0x09, 0x05, 0x8c, 0x2f, 0xfd, 0x1e, 0xba, 0xa5,
-0x60, 0x11, 0x27, 0xd3, 0x9e, 0xa0, 0xe1, 0xf5,
-0x3c, 0xc5, 0x3b, 0x4e, 0xaa, 0xe1, 0x5b, 0xf0,
-0x88, 0x52, 0x98, 0x7b, 0xef, 0xf1, 0x02, 0x91,
-0xb3, 0xc3, 0x0a, 0x8a, 0x32, 0xdf, 0x8f, 0x6b,
-0xf7, 0xe5, 0xd6, 0x1e, 0x13, 0x38, 0xa8, 0x8c,
-0x89, 0x31, 0x52, 0xc6, 0xfe, 0x94, 0x4d, 0xcc,
-0xf9, 0x10, 0xf1, 0xa0, 0x7f, 0x9a, 0xf6, 0x6c,
-0x03, 0x1b, 0x14, 0x76, 0xb4, 0xc6, 0x3c, 0x6f,
-0xc0, 0x02, 0x28, 0x8a, 0x93, 0xdf, 0x86, 0x61,
-0x6b, 0xed, 0xad, 0x42, 0x5c, 0x91, 0xa4, 0xb6,
-0xf2, 0x92, 0x6e, 0x14, 0xa6, 0x5e, 0x69, 0x45,
-0x45, 0xce, 0x3f, 0x39, 0x9d, 0xbb, 0x61, 0x5c,
-0x49, 0x0a, 0xda, 0x9f, 0x45, 0x92, 0xc1, 0x7a,
-0x47, 0x9c, 0xd8, 0x86, 0x38, 0x4f, 0x11, 0xe7,
-0xe9, 0x7a, 0x1d, 0xf0, 0x9f, 0xce, 0xd9, 0x53,
-0x51, 0x62, 0x1b, 0x3d, 0x60, 0xb3, 0x71, 0x2d,
-0x23, 0xb1, 0x07, 0x3d, 0x82, 0x4d, 0xca, 0xd9,
-0x53, 0x10, 0xd3, 0x11, 0xd1, 0xb3, 0x55, 0xa8,
-0xec, 0x42, 0x9c, 0x07, 0xcf, 0x93, 0x36, 0x19,
-0xed, 0x69, 0xbc, 0x5b, 0xce, 0x6e, 0x23, 0xda,
-0xda, 0x04, 0x0d, 0xf0, 0xf7, 0x80, 0xdf, 0xc2,
-0x25, 0xe5, 0xde, 0x07, 0xf8, 0x2f, 0x2a, 0xc9,
-0xd3, 0x77, 0x2e, 0x5d, 0xfb, 0xc0, 0xbc, 0x52,
-0xe5, 0xb9, 0xb3, 0xeb, 0x96, 0x16, 0x5a, 0xf7,
-0xe4, 0xa2, 0xf2, 0xe3, 0x95, 0x3b, 0xe1, 0xf7,
-0x71, 0x2e, 0x6d, 0x8f, 0x94, 0x3c, 0x2c, 0xcc,
-0x83, 0x3c, 0x9c, 0xd7, 0xe1, 0x1d, 0x21, 0xb5,
-0xca, 0x1b, 0x1d, 0x61, 0xd8, 0xfa, 0xef, 0x80,
-0xf3, 0xb5, 0x9f, 0x32, 0xae, 0xfe, 0x53, 0xfa,
-0x18, 0xbc, 0x97, 0x1e, 0xd4, 0xe7, 0xf2, 0xda,
-0x33, 0x4b, 0x92, 0x4f, 0x5d, 0xc9, 0xf5, 0x91,
-0x24, 0xec, 0x62, 0x07, 0x0f, 0x25, 0xab, 0x91,
-0xeb, 0xc3, 0x0d, 0xcb, 0x19, 0x1b, 0xd6, 0x68,
-0xe4, 0x4d, 0x26, 0x89, 0xbc, 0x58, 0x64, 0x68,
-0x68, 0x35, 0x72, 0xd7, 0x5c, 0xd7, 0x54, 0x20,
-0xbf, 0x0f, 0xc1, 0x73, 0x4c, 0x7b, 0xb9, 0xdd,
-0x41, 0xa3, 0x91, 0x9b, 0x8b, 0xd6, 0x0b, 0x62,
-0xae, 0x61, 0xcd, 0x84, 0xf1, 0x0c, 0x59, 0x3b,
-0x3e, 0x69, 0xfd, 0x0a, 0xb1, 0xfa, 0xd8, 0x7f,
-0x8d, 0x69, 0x3f, 0xe6, 0x43, 0x7a, 0x7f, 0xae,
-0xcf, 0x9e, 0x24, 0xbb, 0x60, 0x40, 0xa9, 0x91,
-0xf4, 0x06, 0xd4, 0x48, 0xb9, 0x27, 0xde, 0xb4,
-0xbe, 0xca, 0xdc, 0xfa, 0xc4, 0x9b, 0xd7, 0x57,
-0x49, 0xac, 0x71, 0xa2, 0xc4, 0xfe, 0x3e, 0xda,
-0x18, 0x2e, 0xab, 0x5c, 0xc5, 0x86, 0xb6, 0x3e,
-0x22, 0x58, 0xe3, 0x36, 0x07, 0xf1, 0xd7, 0xbf,
-0x8e, 0xe3, 0xcc, 0x46, 0xee, 0x79, 0x84, 0x11,
-0x24, 0x59, 0x11, 0x73, 0x8d, 0x39, 0xf6, 0x94,
-0xd9, 0xf3, 0xf2, 0x1a, 0xe6, 0x25, 0x51, 0x9e,
-0x85, 0x91, 0x7a, 0xfc, 0x87, 0x37, 0x75, 0x91,
-0xf9, 0x9d, 0xcd, 0xa7, 0x5c, 0x4d, 0x4d, 0xbf,
-0xfc, 0x33, 0x97, 0xeb, 0x5f, 0x1c, 0xf6, 0x7f,
-0x71, 0x35, 0xcf, 0xce, 0xce, 0xaa, 0x73, 0x1a,
-0xff, 0x6f, 0xf6, 0x7d, 0x9a, 0xcf, 0x03, 0x73,
-0x05, 0xc8, 0xf9, 0x3c, 0xfc, 0x3b, 0xf9, 0x7c,
-0xbe, 0x57, 0xe7, 0x79, 0xe0, 0xa7, 0xfa, 0xbc,
-0x68, 0xfa, 0xbc, 0xd5, 0x98, 0xeb, 0xf3, 0x73,
-0x47, 0xfe, 0x1a, 0x9f, 0x1f, 0x1b, 0xf8, 0x7a,
-0x4d, 0xf9, 0x70, 0x6e, 0xdc, 0xaf, 0xdd, 0xd3,
-0xbf, 0xe4, 0xf3, 0xca, 0x1c, 0x9f, 0xb7, 0x96,
-0xa5, 0x39, 0xff, 0xd7, 0xa1, 0x7c, 0x58, 0xf8,
-0x97, 0xc7, 0x7d, 0xda, 0x9e, 0xfe, 0x34, 0xbb,
-0x40, 0x1e, 0x8b, 0xcb, 0x59, 0x58, 0xfe, 0xe5,
-0x9f, 0xdd, 0x74, 0x7d, 0xe6, 0xf3, 0xbf, 0xae,
-0xef, 0xd7, 0x5f, 0xec, 0x6f, 0x39, 0x12, 0xed,
-0xdf, 0x2d, 0xaf, 0xfd, 0x6b, 0xc7, 0x7c, 0x76,
-0x7d, 0x76, 0x7d, 0x76, 0x7d, 0x76, 0x7d, 0x76,
-0x7d, 0x76, 0xfd, 0xff, 0x72, 0x69, 0x71, 0x92,
-0x68, 0x71, 0x52, 0xfd, 0x8f, 0x9e, 0xcb, 0x67,
-0xd7, 0x67, 0xd7, 0x67, 0xd7, 0x67, 0xd7, 0x67,
-0xd7, 0x67, 0xd7, 0x7f, 0xc4, 0x15, 0x64, 0x65,
-0x00, 0xd8, 0xfb, 0xb2, 0xf1, 0xf7, 0xff, 0xf9,
-0x20, 0x28, 0xf3, 0x3e, 0xfd, 0xf7, 0xb5, 0xdf,
-0xb3, 0x05, 0x21, 0xcd, 0xe5, 0xc6, 0xf7, 0xa7,
-0x6e, 0x9e, 0xeb, 0xff, 0x01, 0x51, 0x16, 0x5f,
-0xd0, 0xd5, 0x60, 0x00, 0x00,
diff --git a/board/esd/plu405/Kconfig b/board/esd/plu405/Kconfig
deleted file mode 100644
index b3082cb..0000000
--- a/board/esd/plu405/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_PLU405
-
-config SYS_BOARD
-	default "plu405"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "PLU405"
-
-endif
diff --git a/board/esd/plu405/MAINTAINERS b/board/esd/plu405/MAINTAINERS
deleted file mode 100644
index ccb3658..0000000
--- a/board/esd/plu405/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PLU405 BOARD
-M:	Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S:	Maintained
-F:	board/esd/plu405/
-F:	include/configs/PLU405.h
-F:	configs/PLU405_defconfig
diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile
deleted file mode 100644
index 6ffae67..0000000
--- a/board/esd/plu405/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= plu405.o flash.o \
-	../common/misc.o \
-	../common/esd405ep_nand.o \
diff --git a/board/esd/plu405/flash.c b/board/esd/plu405/flash.c
deleted file mode 100644
index 23e8164..0000000
--- a/board/esd/plu405/flash.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0;
-	int i;
-	uint pbcr;
-	unsigned long base_b0;
-	int size_val = 0;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-	/* Setup offsets */
-	flash_get_offsets (-size_b0, &flash_info[0]);
-
-	/* Re-do sizing to get full correct info */
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	pbcr = mfdcr(EBC0_CFGDATA);
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	base_b0 = -size_b0;
-	switch (size_b0) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	}
-	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(EBC0_CFGDATA, pbcr);
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CONFIG_SYS_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	flash_info[0].size = size_b0;
-
-	return (size_b0);
-}
diff --git a/board/esd/plu405/fpgadata.c b/board/esd/plu405/fpgadata.c
deleted file mode 100644
index 485b9a2..0000000
--- a/board/esd/plu405/fpgadata.c
+++ /dev/null
@@ -1,2358 +0,0 @@
-0x1f, 0x8b, 0x08, 0x08, 0x04, 0x44, 0x9f, 0x46,
-0x00, 0x03, 0x70, 0x6c, 0x75, 0x34, 0x30, 0x35,
-0x5f, 0x31, 0x5f, 0x31, 0x2e, 0x62, 0x69, 0x74,
-0x00, 0x94, 0x9a, 0x0f, 0x70, 0x14, 0x55, 0x9e,
-0xc7, 0x7f, 0xfd, 0xba, 0x93, 0x74, 0xa6, 0x3b,
-0xe9, 0x36, 0x7f, 0x30, 0xb7, 0x08, 0xd7, 0x19,
-0x07, 0x76, 0xc4, 0x61, 0x18, 0x42, 0x80, 0x98,
-0x0d, 0x49, 0x33, 0xa4, 0xac, 0x71, 0xc9, 0x1e,
-0xf1, 0xce, 0xbb, 0xe2, 0xf6, 0xbc, 0xdd, 0x11,
-0x71, 0x8f, 0xbb, 0xe2, 0x2c, 0xd6, 0xdd, 0xb3,
-0xb8, 0x3b, 0x4b, 0x5f, 0x66, 0xa2, 0x04, 0x92,
-0x92, 0x01, 0x39, 0x37, 0xba, 0xac, 0x35, 0x40,
-0x6e, 0x8d, 0x4a, 0x59, 0x11, 0x75, 0x8d, 0x82,
-0xbb, 0x4d, 0x0c, 0x3a, 0x60, 0xd4, 0xb9, 0x94,
-0x7b, 0x8b, 0x7f, 0x8e, 0x6d, 0xd8, 0xc0, 0x46,
-0x89, 0x3a, 0xcb, 0xa2, 0x06, 0x65, 0xcd, 0xbd,
-0xd7, 0x3d, 0xdd, 0xd3, 0x99, 0x9e, 0x04, 0x37,
-0x5a, 0xc5, 0x2f, 0xaf, 0x1f, 0x8f, 0xf7, 0xfb,
-0xcd, 0xef, 0xfd, 0x7e, 0x9f, 0xfe, 0xbe, 0x81,
-0x52, 0x29, 0x63, 0xfe, 0x07, 0xc0, 0xdc, 0x06,
-0xd2, 0x96, 0xcd, 0xff, 0x56, 0x1f, 0x5a, 0xfe,
-0xfd, 0xa5, 0xdf, 0x5f, 0x1a, 0xbc, 0xf3, 0xf6,
-0x8d, 0xb0, 0x01, 0x84, 0xba, 0x1f, 0x2d, 0x0f,
-0xdd, 0xf1, 0xe3, 0x1f, 0x2e, 0xad, 0xaf, 0x87,
-0xdb, 0xc9, 0x6f, 0xa1, 0xd0, 0xca, 0x25, 0xe4,
-0xff, 0xa5, 0x37, 0xc0, 0x46, 0x28, 0x5d, 0x5a,
-0xd7, 0xb8, 0xfc, 0x86, 0xc6, 0xa5, 0x2b, 0xe1,
-0x0e, 0x60, 0x96, 0xf5, 0x4d, 0x91, 0x9f, 0x27,
-0x1f, 0xf9, 0xdb, 0x1f, 0x84, 0x00, 0x33, 0x00,
-0x50, 0x12, 0x62, 0xa2, 0xf4, 0x4f, 0x21, 0xc4,
-0x28, 0x0c, 0xe0, 0x96, 0xc5, 0x21, 0xd0, 0xe8,
-0xef, 0x90, 0x7d, 0x5e, 0x1a, 0x02, 0xc5, 0xf9,
-0x3b, 0x13, 0x02, 0x15, 0xda, 0x41, 0xed, 0x81,
-0x0a, 0x19, 0xae, 0xf8, 0xc3, 0xa8, 0x1c, 0xb6,
-0xec, 0x3f, 0x73, 0xfe, 0xd4, 0x09, 0x3c, 0xe3,
-0xb4, 0xdc, 0x4f, 0xcb, 0x85, 0xa4, 0x65, 0xa2,
-0xd0, 0xd7, 0x59, 0x1f, 0xec, 0xf5, 0xdf, 0xfd,
-0x5a, 0xeb, 0x7f, 0x66, 0xad, 0xff, 0xe7, 0xce,
-0x87, 0x8a, 0xaf, 0x31, 0x1d, 0x80, 0xb3, 0xf7,
-0x63, 0x86, 0x87, 0x03, 0x06, 0x43, 0x14, 0x64,
-0x28, 0xa6, 0x86, 0x42, 0x46, 0x10, 0x80, 0x69,
-0x18, 0xeb, 0x0f, 0x5b, 0xf3, 0x87, 0x8a, 0xbe,
-0x82, 0x29, 0xdc, 0xa2, 0x8a, 0x1a, 0x5b, 0x8f,
-0x76, 0xe2, 0x16, 0x5d, 0x4a, 0xb1, 0x75, 0xf0,
-0x16, 0x35, 0x26, 0x59, 0xe3, 0x11, 0x35, 0x32,
-0xb0, 0xc5, 0x9a, 0x5f, 0xf3, 0x31, 0x1c, 0xc6,
-0x4b, 0xa2, 0x91, 0x2e, 0x4f, 0x33, 0xbc, 0x17,
-0x0b, 0xea, 0x42, 0x17, 0xda, 0x0f, 0x4f, 0x61,
-0x62, 0x0c, 0x22, 0xfa, 0xc8, 0x30, 0x32, 0x9c,
-0x15, 0xc5, 0x13, 0x45, 0x3d, 0xdc, 0x01, 0x10,
-0x55, 0xbf, 0xec, 0xe9, 0x84, 0x18, 0x04, 0x34,
-0x41, 0xae, 0x68, 0x85, 0x38, 0x35, 0x42, 0x68,
-0x04, 0x9e, 0x35, 0x8d, 0x43, 0x8c, 0xb5, 0xbe,
-0xc6, 0x1d, 0x84, 0xc3, 0x10, 0x8c, 0x96, 0xf6,
-0xc6, 0xbe, 0x89, 0x1e, 0x85, 0xe0, 0x51, 0xa1,
-0x17, 0xfd, 0x1e, 0x9e, 0x82, 0xa0, 0x26, 0x0c,
-0xa0, 0x09, 0xfa, 0x88, 0x18, 0xde, 0x0c, 0x17,
-0xcd, 0xce, 0x5f, 0x7d, 0xd5, 0x04, 0x9c, 0x87,
-0xe6, 0x0d, 0xa2, 0xcc, 0x2e, 0x14, 0x53, 0xbb,
-0x9a, 0xef, 0x28, 0xe9, 0x89, 0x6f, 0x80, 0xd7,
-0xa1, 0x59, 0x93, 0x06, 0xd8, 0x09, 0xf8, 0xd2,
-0x34, 0xd2, 0x9c, 0xb5, 0x7e, 0x92, 0x39, 0x02,
-0x53, 0xd0, 0xb4, 0xba, 0x3c, 0x73, 0xed, 0x08,
-0x4c, 0xf1, 0xf7, 0xa9, 0x25, 0x1a, 0x3b, 0x40,
-0x46, 0x5a, 0x34, 0x29, 0xc3, 0x5e, 0xb6, 0x8c,
-0x71, 0xb0, 0xd6, 0xd7, 0xe4, 0x83, 0x74, 0x91,
-0xa8, 0xf8, 0x73, 0x76, 0x81, 0x7a, 0x02, 0x35,
-0xab, 0x52, 0x62, 0xcd, 0x59, 0x6b, 0x59, 0x7b,
-0xfd, 0x8b, 0x9c, 0x15, 0xd9, 0x93, 0x45, 0x01,
-0x63, 0x93, 0xfc, 0x41, 0xf6, 0x9f, 0xa0, 0x3b,
-0x19, 0x8c, 0xfc, 0x43, 0x05, 0x7a, 0x4d, 0x3b,
-0x6c, 0xed, 0xff, 0xbc, 0x69, 0x5c, 0x20, 0xd9,
-0x6f, 0xfe, 0xa4, 0xb8, 0x36, 0x1a, 0x04, 0x58,
-0xc4, 0xdd, 0x05, 0x38, 0xce, 0x04, 0x46, 0x05,
-0x40, 0x47, 0xad, 0xb0, 0xd8, 0xf1, 0x99, 0x24,
-0x67, 0xc5, 0xfc, 0xc9, 0xc8, 0xdf, 0x83, 0x17,
-0xf0, 0xe2, 0xa8, 0xff, 0x9f, 0xd1, 0x77, 0x61,
-0x5b, 0xc7, 0x62, 0x5d, 0x88, 0xa0, 0x77, 0xe9,
-0x88, 0x2e, 0x6c, 0x45, 0xa7, 0xe0, 0x71, 0xd3,
-0xf8, 0xca, 0x5e, 0x3f, 0xc2, 0xb7, 0xc1, 0x1f,
-0xa1, 0x49, 0x2d, 0x67, 0x1e, 0x82, 0xd8, 0x10,
-0x34, 0x91, 0xd5, 0x58, 0x8d, 0x8e, 0x68, 0x52,
-0x88, 0x1d, 0x31, 0x8d, 0xa5, 0xec, 0x28, 0xb2,
-0x12, 0x49, 0xad, 0xa6, 0xf1, 0x69, 0x51, 0xa5,
-0x9b, 0xd9, 0x0c, 0x59, 0x86, 0x44, 0x23, 0xcd,
-0x4e, 0xaa, 0xf9, 0xf1, 0x49, 0x17, 0x5b, 0xf1,
-0xe1, 0x39, 0x23, 0x3e, 0x29, 0x31, 0xc6, 0xfa,
-0xb0, 0x16, 0xa9, 0xd3, 0x24, 0xcc, 0x7a, 0x5d,
-0xf1, 0xff, 0xd0, 0xce, 0x9f, 0x54, 0xcd, 0x5e,
-0x78, 0x01, 0x02, 0x61, 0x3e, 0xb4, 0x5b, 0x54,
-0xee, 0x67, 0x6a, 0x35, 0x41, 0x0d, 0xcb, 0xb0,
-0x0d, 0x16, 0x6b, 0xc2, 0x16, 0xf4, 0x3e, 0x79,
-0x64, 0x18, 0x17, 0xec, 0xcf, 0x57, 0x81, 0xc7,
-0x0c, 0xef, 0xf8, 0x4d, 0x9e, 0x0a, 0x78, 0x00,
-0xd7, 0xea, 0x82, 0x1e, 0x5b, 0x01, 0xdb, 0x2c,
-0x7f, 0xb3, 0x8e, 0xeb, 0x76, 0x66, 0x6f, 0xe2,
-0x7a, 0x68, 0xd0, 0x46, 0xfb, 0x15, 0x54, 0x96,
-0x88, 0x47, 0xf4, 0x31, 0xa1, 0x7e, 0x7f, 0x19,
-0xce, 0xcf, 0xb7, 0x51, 0x3b, 0x3f, 0xc7, 0xab,
-0xc7, 0xe1, 0x0b, 0x68, 0xc1, 0x62, 0x92, 0xbd,
-0xa1, 0xf8, 0x44, 0xa4, 0x0e, 0x4b, 0x3a, 0x6a,
-0x44, 0x27, 0xa0, 0x19, 0x4b, 0x49, 0x96, 0x3e,
-0x32, 0x8c, 0x2f, 0xec, 0xfd, 0x44, 0x98, 0x24,
-0x4c, 0x42, 0x33, 0x48, 0xbc, 0x70, 0x5a, 0x9d,
-0x54, 0x89, 0x81, 0x59, 0x5d, 0x35, 0x46, 0x88,
-0x01, 0x59, 0x63, 0x14, 0xac, 0xf5, 0x79, 0xb9,
-0x0f, 0x2e, 0x91, 0xf8, 0x8b, 0xcf, 0x55, 0x2e,
-0x0c, 0xbf, 0x0e, 0x75, 0xaa, 0xb4, 0xbb, 0x64,
-0x4c, 0xbd, 0x04, 0x34, 0x91, 0xd8, 0x31, 0xc8,
-0x1a, 0x43, 0xf6, 0x7e, 0x30, 0xb7, 0x11, 0x5e,
-0x84, 0x60, 0x7b, 0x57, 0xc2, 0x53, 0x02, 0x1d,
-0x09, 0xaf, 0x4a, 0xf2, 0xff, 0x2c, 0x26, 0x23,
-0xaa, 0x90, 0x40, 0x63, 0xe4, 0x51, 0x23, 0x35,
-0x74, 0xb0, 0xaa, 0x60, 0x43, 0x91, 0x8f, 0xce,
-0x0f, 0xfb, 0xf7, 0x78, 0x7c, 0xb0, 0x1d, 0xbc,
-0xe1, 0xb5, 0xe6, 0x34, 0x7b, 0xbe, 0x61, 0xbc,
-0x6a, 0xe7, 0x83, 0x52, 0xc5, 0xc1, 0x33, 0x10,
-0x50, 0x79, 0x19, 0xf9, 0xc8, 0x31, 0x54, 0x54,
-0x41, 0x46, 0xc3, 0xc6, 0x48, 0xd6, 0xf0, 0x53,
-0x63, 0x88, 0xb1, 0xf2, 0x61, 0x6b, 0x59, 0xd4,
-0x70, 0x4a, 0xc4, 0x82, 0x1f, 0x52, 0x50, 0x47,
-0xbc, 0x43, 0xb6, 0x9b, 0xb6, 0xf1, 0x26, 0x6b,
-0xe5, 0x67, 0x6f, 0x11, 0x75, 0xaa, 0xa5, 0x7d,
-0xc9, 0x1e, 0xf6, 0x53, 0x62, 0xfc, 0x4a, 0x95,
-0xda, 0xd9, 0xf7, 0x2d, 0x37, 0x37, 0x12, 0xa3,
-0x91, 0x1a, 0xe7, 0x8a, 0xad, 0x7c, 0xa8, 0x21,
-0xf3, 0xdf, 0x81, 0x55, 0x43, 0x62, 0x26, 0x5e,
-0xcf, 0xbc, 0x41, 0x13, 0x2f, 0x5d, 0x72, 0x11,
-0xf2, 0xe3, 0xf3, 0xaa, 0x5d, 0x1f, 0x1a, 0x6a,
-0x74, 0x18, 0x84, 0xa0, 0x1c, 0xe9, 0x44, 0xb5,
-0x6a, 0x17, 0x17, 0x04, 0x81, 0xee, 0x87, 0x8c,
-0x4c, 0x33, 0xde, 0xe4, 0xac, 0xf8, 0x44, 0xa0,
-0x93, 0x38, 0x15, 0x54, 0xf9, 0x10, 0xf1, 0xb7,
-0x03, 0x7c, 0xea, 0x5a, 0xc3, 0x4d, 0x26, 0xa0,
-0xb2, 0x0e, 0xc7, 0x73, 0x9f, 0x57, 0x2f, 0xd7,
-0x07, 0x2f, 0x32, 0xc1, 0x28, 0xbf, 0x47, 0x09,
-0x90, 0x78, 0x92, 0xe8, 0x3d, 0x5c, 0x28, 0x9e,
-0x76, 0x3e, 0x24, 0xab, 0xc7, 0xc4, 0x77, 0xb8,
-0xa6, 0x4d, 0x81, 0x44, 0x69, 0xb1, 0x77, 0xbb,
-0xde, 0xac, 0xae, 0x4b, 0xa0, 0xb3, 0xf0, 0xef,
-0x79, 0xfb, 0x1f, 0xb7, 0xeb, 0x4f, 0x8a, 0xe9,
-0x83, 0x1b, 0xe8, 0xe0, 0x23, 0xc2, 0x39, 0xf5,
-0x52, 0xc2, 0x78, 0xfa, 0x7b, 0x97, 0xbf, 0x5f,
-0xd8, 0xf5, 0x87, 0x97, 0x8d, 0x7c, 0x93, 0x45,
-0xb4, 0xa6, 0x16, 0xa5, 0xd4, 0xe6, 0x52, 0xa9,
-0x93, 0x3d, 0xed, 0x8a, 0xff, 0x09, 0xbb, 0xfe,
-0xf8, 0x8b, 0xfc, 0xf0, 0x12, 0x2c, 0xe9, 0xe7,
-0x75, 0xf4, 0x2d, 0xfc, 0xe0, 0xea, 0x25, 0x0f,
-0x09, 0xfb, 0xd1, 0x97, 0xa1, 0x97, 0x20, 0x88,
-0xe7, 0x26, 0xd1, 0x38, 0x50, 0x43, 0x48, 0x92,
-0xfc, 0xb6, 0xf2, 0xc1, 0x6f, 0xd6, 0x9f, 0x49,
-0x8f, 0x0f, 0x49, 0x4a, 0xbc, 0x8b, 0x9c, 0x8e,
-0x06, 0xf4, 0x86, 0xef, 0x59, 0x66, 0xfa, 0x79,
-0x39, 0x61, 0xd7, 0x1f, 0x2c, 0xdf, 0x6a, 0x1c,
-0x52, 0xcf, 0x16, 0x6f, 0x0f, 0x6c, 0x53, 0x17,
-0x63, 0xd6, 0x71, 0x6c, 0x6d, 0x63, 0xdc, 0x5e,
-0xbf, 0xab, 0xeb, 0x94, 0xfc, 0x39, 0x5e, 0xa5,
-0x07, 0x1b, 0x84, 0x39, 0xf0, 0x1a, 0x31, 0xa4,
-0xf5, 0xe4, 0x74, 0xd0, 0x11, 0x61, 0x2b, 0x7b,
-0xca, 0x30, 0xa4, 0xad, 0xec, 0x87, 0x76, 0xfd,
-0xe1, 0xab, 0x8d, 0x7a, 0xa2, 0x95, 0x0d, 0x54,
-0x6e, 0xa4, 0x06, 0x76, 0x96, 0x11, 0xdb, 0x18,
-0xb2, 0xeb, 0x0f, 0x14, 0xfd, 0x92, 0x36, 0xa9,
-0x64, 0xf9, 0x49, 0x76, 0xbe, 0xfc, 0x5a, 0x82,
-0x11, 0xdb, 0xde, 0x59, 0xf3, 0x99, 0x3a, 0x95,
-0x98, 0xde, 0xbf, 0x34, 0xbb, 0xfe, 0xf4, 0xd7,
-0xec, 0x55, 0xc9, 0x26, 0x3b, 0xcb, 0x6e, 0x66,
-0x6f, 0xc5, 0xdb, 0xa0, 0x76, 0x8f, 0xa7, 0x1d,
-0xbd, 0x9d, 0xbf, 0x7f, 0xf6, 0x49, 0xfb, 0xf3,
-0x05, 0xbc, 0xd7, 0xf4, 0x57, 0x46, 0xff, 0xe8,
-0x7b, 0x90, 0xaf, 0x6d, 0x2d, 0x6d, 0x7f, 0xf5,
-0x6d, 0xee, 0x05, 0xf8, 0xd7, 0x69, 0xfe, 0x6a,
-0x76, 0xfd, 0x51, 0xcc, 0xfa, 0x93, 0xb9, 0x49,
-0x42, 0x6d, 0xc5, 0x31, 0x55, 0xc1, 0xc2, 0x7c,
-0x78, 0x55, 0xcd, 0xaf, 0xe7, 0x5d, 0xf6, 0x79,
-0xef, 0xaf, 0x9e, 0xe0, 0x89, 0x53, 0x99, 0xf2,
-0xe7, 0xd8, 0xdb, 0xe1, 0x75, 0xed, 0x10, 0x33,
-0xef, 0x08, 0xf9, 0x58, 0xbf, 0x84, 0x7b, 0xa7,
-0xd7, 0x4f, 0x7b, 0x3f, 0x98, 0x31, 0xe2, 0xd3,
-0xb6, 0xae, 0xaa, 0x92, 0x3c, 0x8d, 0x34, 0x43,
-0xf9, 0x00, 0xc9, 0x87, 0xfc, 0xf8, 0xe4, 0xea,
-0x61, 0xad, 0x6c, 0xf4, 0x3b, 0x4d, 0xcc, 0xb0,
-0x7f, 0x87, 0xdf, 0xc0, 0x12, 0xf4, 0xa4, 0x49,
-0x37, 0xcf, 0xaf, 0xe7, 0x5a, 0xab, 0xb5, 0x9f,
-0x7d, 0xdc, 0x66, 0xf8, 0x29, 0x04, 0xb7, 0xf6,
-0x1f, 0x79, 0xe9, 0x71, 0xe8, 0xd7, 0x03, 0x0a,
-0x3f, 0x80, 0x7e, 0x07, 0x87, 0xa7, 0xf7, 0x5f,
-0xa4, 0xdb, 0xf5, 0x01, 0x93, 0x7e, 0x47, 0xba,
-0xb3, 0xce, 0xef, 0x42, 0x3e, 0xb9, 0x5b, 0x09,
-0x2a, 0xa5, 0x89, 0x8a, 0x33, 0x8a, 0x6b, 0xbe,
-0x9d, 0x0f, 0x7c, 0x95, 0x68, 0x04, 0x81, 0x07,
-0xd4, 0x03, 0xfb, 0xc8, 0x69, 0x2d, 0x95, 0x49,
-0xf4, 0xf2, 0xe3, 0x93, 0xab, 0x3f, 0x50, 0xb6,
-0x99, 0xf6, 0x77, 0x4d, 0xc4, 0x95, 0x3e, 0x44,
-0xda, 0x0a, 0x94, 0x25, 0x8c, 0xf8, 0x64, 0xfd,
-0x3d, 0x6c, 0x1a, 0x9a, 0x5d, 0x7f, 0xf6, 0x15,
-0x5d, 0x86, 0xdf, 0x12, 0xa7, 0x96, 0x68, 0xc4,
-0xbb, 0xcb, 0xd0, 0x02, 0x4f, 0x17, 0xf2, 0xf7,
-0x03, 0xbb, 0xfe, 0x68, 0x45, 0xd9, 0x24, 0xd1,
-0x2b, 0x9b, 0xe1, 0x32, 0x5e, 0x59, 0xdb, 0x93,
-0x62, 0x2f, 0xc0, 0x6f, 0x67, 0xe4, 0x1f, 0x2c,
-0x53, 0xc8, 0x69, 0x4c, 0x76, 0x77, 0xb1, 0x01,
-0xf8, 0x00, 0x7b, 0xc1, 0xd3, 0x85, 0xf4, 0x64,
-0x77, 0x1e, 0xff, 0xe8, 0xb9, 0xfa, 0x5f, 0xd4,
-0x96, 0x75, 0xaa, 0xb8, 0x8d, 0x56, 0x27, 0x95,
-0x38, 0x3e, 0xec, 0xea, 0x47, 0x43, 0x39, 0xfe,
-0xa9, 0xa6, 0xfc, 0xb3, 0x08, 0x93, 0xa0, 0x05,
-0xe0, 0x09, 0x6d, 0xd1, 0x06, 0x4f, 0x4f, 0xc5,
-0x39, 0xa5, 0x3b, 0x2f, 0x9e, 0x39, 0xfe, 0x81,
-0xaa, 0x00, 0x8d, 0x46, 0x72, 0xe7, 0x13, 0xc2,
-0x66, 0xc8, 0x68, 0x4d, 0x21, 0xbe, 0x8b, 0xfd,
-0x9d, 0xab, 0xff, 0x6a, 0x76, 0xfd, 0x39, 0x0d,
-0x46, 0x7f, 0xdf, 0x25, 0xe9, 0xec, 0x11, 0xf8,
-0x13, 0xac, 0x04, 0x49, 0xab, 0x74, 0xc7, 0x67,
-0xd2, 0xc9, 0x3f, 0xf2, 0x7b, 0xd0, 0x3c, 0x22,
-0xfa, 0x0e, 0x4c, 0xa0, 0x14, 0x5e, 0xa1, 0x92,
-0xfa, 0x73, 0x16, 0xd6, 0x9a, 0xcb, 0x6e, 0xb6,
-0xd6, 0xcf, 0xd8, 0xf5, 0x27, 0xd5, 0x6a, 0xf0,
-0x4f, 0x82, 0x1f, 0x24, 0xbb, 0x25, 0xfd, 0x48,
-0x2d, 0xc7, 0x68, 0x8c, 0x99, 0xb6, 0xff, 0x72,
-0x27, 0xff, 0x9c, 0x31, 0xe3, 0x93, 0xf6, 0x28,
-0xe1, 0x11, 0x02, 0xa8, 0x3e, 0x20, 0xf5, 0x59,
-0x97, 0x69, 0x7c, 0x3c, 0x05, 0xf9, 0x67, 0x03,
-0x33, 0x9f, 0x36, 0xfd, 0xa4, 0x27, 0x52, 0x7c,
-0x4a, 0x2e, 0xc2, 0xb5, 0x8a, 0xb0, 0x9e, 0xf0,
-0xcf, 0x34, 0x1e, 0xf0, 0x6c, 0x45, 0x27, 0x1d,
-0xfc, 0x43, 0xf3, 0xad, 0x29, 0x5d, 0xce, 0x6d,
-0x9b, 0x80, 0x30, 0x54, 0x69, 0x52, 0x05, 0x29,
-0xb3, 0x71, 0x72, 0x22, 0xca, 0x43, 0x6c, 0x9b,
-0x05, 0x42, 0xa3, 0x76, 0xba, 0xa9, 0xf3, 0x68,
-0x7c, 0x56, 0xa5, 0x17, 0xff, 0x9a, 0x44, 0xe3,
-0x22, 0x01, 0x83, 0x72, 0x92, 0x3f, 0xea, 0x94,
-0x3c, 0x13, 0xff, 0xf4, 0x17, 0x19, 0x41, 0x96,
-0x49, 0x58, 0x48, 0xfc, 0xa1, 0x99, 0x21, 0xd1,
-0x38, 0x33, 0x1b, 0xff, 0x5c, 0x65, 0xd4, 0x13,
-0x2c, 0x00, 0x7b, 0x2b, 0xf7, 0x3c, 0xda, 0x07,
-0x82, 0x4a, 0x76, 0xfb, 0xf8, 0x8c, 0xfc, 0xa3,
-0x99, 0xfc, 0xb3, 0x81, 0x60, 0xde, 0x7c, 0xf8,
-0x85, 0xb6, 0xf8, 0xb6, 0xb9, 0x5b, 0xd1, 0x67,
-0x2e, 0xfe, 0xc9, 0xd8, 0xe7, 0x3d, 0x52, 0x65,
-0x04, 0x2d, 0xd3, 0x7d, 0x0d, 0x6a, 0xe3, 0x9f,
-0x55, 0x95, 0xb4, 0x50, 0x1f, 0x7b, 0x13, 0x0e,
-0xcc, 0xc2, 0x3f, 0xfd, 0x14, 0x72, 0x12, 0xd2,
-0x41, 0xd6, 0xcf, 0x7f, 0x06, 0xf7, 0xc5, 0x05,
-0x1d, 0x5d, 0x52, 0xf2, 0xf8, 0x07, 0x39, 0xf8,
-0x07, 0x8c, 0xa6, 0x23, 0xb3, 0x45, 0xb4, 0xfb,
-0xdc, 0x64, 0xb6, 0xa1, 0xce, 0xd9, 0xf8, 0xc7,
-0x68, 0x6a, 0x43, 0x65, 0x03, 0x71, 0x1f, 0x73,
-0x09, 0xd7, 0x85, 0xa5, 0xc4, 0xed, 0xb4, 0x8d,
-0xce, 0xcc, 0x3f, 0x46, 0x93, 0x6d, 0x17, 0xf6,
-0xee, 0xf0, 0x95, 0xbe, 0xb8, 0x9e, 0xf0, 0x4f,
-0xc2, 0x6b, 0xb6, 0x5d, 0xc9, 0xd1, 0x7f, 0x73,
-0xfc, 0x53, 0x93, 0xe5, 0x1f, 0x61, 0x37, 0xda,
-0x28, 0xbf, 0x08, 0xfb, 0x57, 0xcf, 0x4d, 0xa0,
-0x3e, 0x63, 0xda, 0xdc, 0x82, 0xfc, 0xc3, 0x03,
-0x97, 0x6d, 0xfa, 0x75, 0x45, 0xc4, 0x50, 0xda,
-0xe7, 0xca, 0xe8, 0x18, 0x47, 0x47, 0x3c, 0x0e,
-0x1e, 0xc8, 0xd5, 0x9f, 0x41, 0x3e, 0x6a, 0x39,
-0x15, 0x85, 0x41, 0xa6, 0x02, 0x76, 0x62, 0xd6,
-0x24, 0x40, 0xc1, 0xe1, 0xef, 0xc7, 0xac, 0xb5,
-0x9f, 0xde, 0x79, 0x59, 0xa7, 0xf6, 0x10, 0xef,
-0xfe, 0x44, 0x78, 0x66, 0x67, 0xfa, 0x6f, 0xde,
-0xaf, 0xc9, 0xef, 0xef, 0xe7, 0x4a, 0xac, 0x78,
-0xf6, 0x56, 0x1b, 0xbc, 0xa4, 0x8a, 0xe9, 0x6d,
-0x63, 0xf0, 0x29, 0x1c, 0x6a, 0xaf, 0x19, 0x60,
-0x17, 0xb8, 0x78, 0xe0, 0x9c, 0x9d, 0x3f, 0x0d,
-0x72, 0x94, 0xa3, 0x90, 0xe3, 0xef, 0x44, 0x7a,
-0x62, 0x12, 0xbc, 0x50, 0x86, 0x11, 0x2e, 0xc0,
-0x3f, 0xb9, 0xb7, 0xd8, 0x56, 0xe2, 0x9d, 0xa8,
-0xf2, 0x35, 0x68, 0x58, 0x79, 0x86, 0xe9, 0x57,
-0xf9, 0x04, 0xe2, 0x18, 0x07, 0xef, 0x65, 0xfd,
-0xcd, 0xf1, 0x98, 0x11, 0x3d, 0x0d, 0x76, 0x91,
-0xe8, 0x3d, 0xc1, 0xfb, 0xd5, 0xed, 0x89, 0x70,
-0x9f, 0xea, 0x8a, 0x67, 0x8e, 0x7f, 0x38, 0xca,
-0xb7, 0xcd, 0x61, 0x6e, 0x2f, 0x79, 0xfa, 0x4c,
-0xc5, 0xbf, 0xac, 0xe7, 0xe7, 0xd8, 0xfb, 0x5f,
-0x53, 0x80, 0x7f, 0xfa, 0xc1, 0x98, 0xbf, 0x3a,
-0xeb, 0xdd, 0xdd, 0x11, 0xe9, 0x51, 0xe2, 0x5d,
-0xbe, 0xbf, 0x1f, 0xda, 0xf5, 0xc7, 0x0f, 0x26,
-0xff, 0x48, 0x78, 0x8d, 0x22, 0xa6, 0xda, 0x56,
-0x80, 0xd4, 0xb9, 0x46, 0x87, 0x14, 0x9a, 0x91,
-0x7f, 0x38, 0xca, 0x3f, 0x8b, 0x7b, 0x05, 0x7d,
-0x87, 0xbf, 0xf8, 0xc1, 0xa3, 0x5e, 0x4a, 0x3b,
-0xe3, 0xf0, 0x2e, 0x49, 0x63, 0x21, 0xc7, 0x3f,
-0xec, 0x8e, 0x1c, 0xff, 0xfc, 0x97, 0x51, 0x7f,
-0x06, 0x05, 0x2f, 0x12, 0x21, 0xae, 0xb6, 0x1e,
-0xa5, 0xc7, 0x84, 0xbc, 0x2b, 0x05, 0xb4, 0x52,
-0x67, 0x7d, 0xb6, 0xeb, 0x4f, 0x2d, 0x73, 0x8d,
-0x79, 0x7e, 0x37, 0xa1, 0xf9, 0x91, 0x6d, 0x7c,
-0x6d, 0x6a, 0xee, 0x16, 0x74, 0xaa, 0xe3, 0x27,
-0x70, 0xdd, 0xb4, 0xf3, 0x9b, 0xcc, 0xad, 0xcf,
-0xcf, 0x97, 0x3f, 0xef, 0x58, 0xb5, 0x4f, 0xf0,
-0x7b, 0x9b, 0xf1, 0x8d, 0x78, 0xf9, 0x05, 0x89,
-0x62, 0xcf, 0x6f, 0xc8, 0xb1, 0x95, 0x4c, 0xfe,
-0x99, 0x97, 0xc7, 0x3f, 0x65, 0x26, 0xff, 0x90,
-0xd3, 0x37, 0x41, 0x4e, 0xdf, 0x2f, 0x53, 0xd2,
-0xc0, 0x9a, 0x8f, 0xe4, 0x99, 0xf9, 0x47, 0x35,
-0xfb, 0x57, 0xb2, 0x2c, 0xc5, 0xde, 0x03, 0xaf,
-0xe2, 0x65, 0xfa, 0xba, 0x49, 0x76, 0x4a, 0x99,
-0x72, 0xf6, 0xaf, 0x75, 0x93, 0x95, 0xe9, 0x1c,
-0xff, 0x5c, 0x65, 0xf0, 0x0f, 0xe6, 0x55, 0xd4,
-0xa4, 0xfe, 0xaf, 0x72, 0xdd, 0x90, 0x44, 0xb6,
-0xad, 0xe6, 0xf3, 0x5b, 0x8e, 0x37, 0x12, 0x60,
-0xd4, 0xab, 0x4e, 0x7e, 0x0b, 0xba, 0x06, 0x1e,
-0xe6, 0x6e, 0x33, 0xa6, 0x29, 0xf9, 0xf3, 0x87,
-0xed, 0xfa, 0x13, 0xad, 0x1a, 0xe1, 0x49, 0xd0,
-0x74, 0x1e, 0x76, 0x04, 0x60, 0xb7, 0xb8, 0x28,
-0x13, 0x5b, 0x8e, 0xde, 0x72, 0xf5, 0xf7, 0x93,
-0x76, 0x7e, 0xfa, 0x0d, 0xde, 0x6b, 0x92, 0xc5,
-0x27, 0xd9, 0x26, 0xc2, 0x3f, 0x3f, 0xba, 0x28,
-0xbc, 0xcc, 0x4e, 0xa9, 0xf9, 0xfe, 0x9e, 0x70,
-0xec, 0xc7, 0x18, 0xdc, 0xf3, 0xa0, 0xc2, 0x1e,
-0x64, 0xbe, 0xc4, 0xd3, 0xa7, 0xd9, 0xc6, 0x98,
-0x5d, 0x1f, 0x76, 0xc9, 0x97, 0x19, 0x52, 0xb4,
-0xef, 0x12, 0xf5, 0xca, 0x26, 0xfe, 0x14, 0xb3,
-0x4c, 0xbb, 0x26, 0x53, 0x69, 0x96, 0xf1, 0x32,
-0x47, 0x3d, 0xd7, 0xed, 0xfd, 0x1c, 0xed, 0xdc,
-0x4c, 0x9b, 0x54, 0x9a, 0xef, 0x47, 0x07, 0x8b,
-0x63, 0x8c, 0x97, 0x74, 0x2b, 0x30, 0xdb, 0x96,
-0xe4, 0x78, 0x7f, 0x3f, 0xad, 0x5a, 0xeb, 0x13,
-0xfe, 0x91, 0xc9, 0x53, 0xcc, 0xf7, 0x17, 0x07,
-0x60, 0x87, 0xe2, 0x3d, 0xca, 0x0f, 0x78, 0x27,
-0xdc, 0xbc, 0x94, 0xab, 0x3f, 0x1c, 0xed, 0x47,
-0x41, 0x1c, 0x81, 0xf2, 0x1e, 0x88, 0x81, 0xa2,
-0xad, 0x0d, 0x15, 0x9b, 0x61, 0x31, 0xfa, 0xdd,
-0x81, 0x7c, 0xfe, 0xc1, 0x22, 0xed, 0xa7, 0xcd,
-0x58, 0x1c, 0x20, 0xbc, 0xb1, 0x83, 0x59, 0x76,
-0xf4, 0xe4, 0x00, 0xd9, 0x3f, 0x75, 0x53, 0x70,
-0xf8, 0x3b, 0x6e, 0xd7, 0x9f, 0xe4, 0xbc, 0xcb,
-0x32, 0xe9, 0x5f, 0x5a, 0x99, 0x4a, 0xbc, 0x9b,
-0x80, 0x5f, 0x69, 0xdf, 0x73, 0xb8, 0x79, 0x19,
-0x3e, 0xc9, 0xfa, 0xcb, 0x5a, 0xf1, 0xd4, 0xb2,
-0xfc, 0x2c, 0x9d, 0x61, 0xeb, 0x60, 0x18, 0xaf,
-0xc4, 0xa2, 0x86, 0x1a, 0xe1, 0x93, 0x19, 0xf9,
-0x47, 0x33, 0xf8, 0x27, 0x98, 0x14, 0x0e, 0x22,
-0x45, 0xee, 0xc2, 0xde, 0x24, 0xdf, 0x8b, 0x9e,
-0x86, 0x7c, 0xfe, 0xc9, 0xe9, 0x3f, 0x29, 0x6e,
-0x84, 0x7b, 0x16, 0x44, 0x10, 0xfa, 0xc2, 0x1b,
-0xa1, 0x0b, 0x6d, 0xec, 0x28, 0x0d, 0x55, 0xf0,
-0xae, 0x7e, 0x74, 0x21, 0x8f, 0x7f, 0x8c, 0x97,
-0x94, 0x3b, 0xe9, 0xfa, 0x89, 0xeb, 0xe8, 0xfa,
-0x4f, 0xcd, 0xc8, 0x3f, 0x6a, 0xb5, 0x11, 0x84,
-0xb0, 0x74, 0x2d, 0x0a, 0xc7, 0xb4, 0xd4, 0x8a,
-0x8e, 0xb2, 0x9e, 0xf8, 0xb5, 0xca, 0xf9, 0x2b,
-0xe8, 0x3f, 0x2d, 0x37, 0x4a, 0xe3, 0x95, 0x83,
-0x84, 0x0f, 0xef, 0xd1, 0xca, 0x35, 0xf6, 0xa2,
-0x41, 0x8c, 0xce, 0xfe, 0x3e, 0xe1, 0xd2, 0x7f,
-0x48, 0x91, 0xe9, 0x83, 0x94, 0x6c, 0x7c, 0x10,
-0x63, 0xf8, 0x8a, 0xfa, 0xcf, 0x6d, 0x42, 0x27,
-0xe1, 0xb7, 0x6e, 0xec, 0x1d, 0x27, 0x85, 0xf7,
-0x98, 0x2b, 0x1f, 0x72, 0xfc, 0x33, 0x6e, 0xf1,
-0xe1, 0xf5, 0x28, 0x06, 0xb1, 0xa4, 0xff, 0x03,
-0xbe, 0xd4, 0x3b, 0xab, 0xfe, 0x93, 0xe5, 0x1f,
-0x61, 0x3c, 0xdc, 0x08, 0x0f, 0x24, 0xf6, 0x25,
-0xf9, 0x4d, 0xde, 0xd1, 0x9c, 0xfe, 0x93, 0x35,
-0x2e, 0x4f, 0xe3, 0x1f, 0x02, 0x39, 0x20, 0xc9,
-0x6c, 0xa7, 0x77, 0x48, 0x6e, 0xd0, 0x02, 0x4a,
-0xbe, 0xfe, 0x53, 0x12, 0x72, 0xea, 0x3f, 0x06,
-0xff, 0xb4, 0x80, 0xd4, 0x5e, 0x79, 0x12, 0xbe,
-0x92, 0xbf, 0xd5, 0x29, 0xfd, 0xa1, 0x00, 0x3f,
-0xbb, 0xf8, 0x27, 0x42, 0x82, 0xa0, 0xc0, 0x93,
-0x50, 0xa7, 0xf5, 0x60, 0xd2, 0x94, 0xf2, 0xe2,
-0xbf, 0xc6, 0xc5, 0x3f, 0x43, 0xc2, 0x16, 0x4f,
-0x0d, 0x3c, 0x00, 0xfb, 0x34, 0x3e, 0x8a, 0x12,
-0x6e, 0xfd, 0xc7, 0x8e, 0x3f, 0x36, 0xf9, 0x27,
-0x2a, 0xac, 0x8f, 0xcd, 0xe1, 0x7f, 0x8e, 0x95,
-0x8f, 0x78, 0x3f, 0xba, 0x5b, 0x7e, 0x3c, 0x5f,
-0xff, 0xb1, 0xe3, 0x9f, 0xe5, 0x9f, 0xbf, 0x16,
-0xe4, 0x0a, 0x0f, 0xc4, 0x38, 0x25, 0xed, 0xaf,
-0x8f, 0x1d, 0x53, 0x66, 0xd3, 0x7f, 0xfa, 0x4d,
-0xc8, 0x89, 0xb2, 0x8d, 0xf2, 0xc7, 0x5b, 0xea,
-0x70, 0x60, 0x4c, 0xf8, 0x4f, 0xfc, 0xe1, 0xcc,
-0xfa, 0x0f, 0xd8, 0x4d, 0xe7, 0x74, 0x78, 0x52,
-0x6d, 0xae, 0x20, 0xc6, 0x3e, 0xee, 0x8a, 0xfc,
-0xa3, 0x49, 0x7b, 0xe3, 0x0b, 0xe1, 0x78, 0xc7,
-0x40, 0xab, 0xf8, 0x0d, 0x02, 0xb9, 0x57, 0xd4,
-0x7f, 0x56, 0x0b, 0xbd, 0xe1, 0x05, 0xd0, 0xa1,
-0x79, 0x27, 0x3d, 0x89, 0x8a, 0x6f, 0x1a, 0xfa,
-0x4f, 0xf9, 0x6c, 0xfc, 0x43, 0x06, 0x3d, 0x9c,
-0xba, 0xbd, 0xd6, 0x4b, 0xfa, 0xbb, 0xa7, 0x0f,
-0xe7, 0xe9, 0x15, 0x15, 0x0e, 0xfe, 0xe1, 0x0c,
-0xfe, 0x89, 0x0a, 0x35, 0xa8, 0x08, 0x3a, 0x40,
-0x21, 0xd8, 0x53, 0xde, 0x09, 0x33, 0xf3, 0x4f,
-0x43, 0x99, 0xcd, 0x3f, 0xa4, 0xa4, 0x33, 0x75,
-0x54, 0x08, 0x4a, 0x4e, 0xd7, 0x1f, 0x4a, 0x30,
-0xfb, 0x26, 0x63, 0xeb, 0x3f, 0xf3, 0xb2, 0xfe,
-0xde, 0xc2, 0x5e, 0x44, 0xcf, 0x43, 0x73, 0xbb,
-0xf4, 0xb6, 0x70, 0x8b, 0xe1, 0x66, 0xb9, 0x93,
-0x67, 0xb8, 0x1c, 0x6f, 0x18, 0xfc, 0xa3, 0x49,
-0xe9, 0xb8, 0x0f, 0x8e, 0x41, 0x5d, 0x44, 0x4c,
-0xb3, 0xf5, 0x6e, 0xfd, 0xc7, 0xc1, 0x3f, 0x59,
-0xc8, 0x49, 0x22, 0x1e, 0x4e, 0x92, 0x54, 0xe3,
-0xef, 0x27, 0xdd, 0x76, 0x66, 0xfe, 0x89, 0x14,
-0xd9, 0x4e, 0xb5, 0xd6, 0x6e, 0x47, 0x4a, 0xbb,
-0x47, 0x0e, 0x73, 0x90, 0xcf, 0x3f, 0xa3, 0x39,
-0xfe, 0xa9, 0xee, 0xb3, 0x82, 0xdc, 0xba, 0xfa,
-0xa7, 0xb2, 0x57, 0xf5, 0x3c, 0x8c, 0xfe, 0x7b,
-0x76, 0xfd, 0x87, 0x6e, 0xf2, 0x87, 0x52, 0x42,
-0xf8, 0x01, 0x3a, 0x7e, 0xa6, 0x4e, 0x5d, 0x94,
-0x60, 0x1d, 0x9f, 0xef, 0x8b, 0xf9, 0xfc, 0x33,
-0xce, 0xf4, 0x71, 0x97, 0xe8, 0x79, 0xf9, 0x06,
-0x7b, 0x10, 0x2e, 0xc5, 0x8e, 0xa8, 0x65, 0x35,
-0x39, 0x37, 0x0b, 0xe8, 0x3f, 0x7e, 0xd9, 0xe2,
-0x9f, 0x78, 0x2d, 0x9c, 0xe4, 0xe7, 0x90, 0xf8,
-0xb3, 0x8a, 0x72, 0x45, 0xfd, 0x67, 0x0f, 0xc1,
-0xf8, 0x45, 0xe4, 0x7c, 0x79, 0x71, 0x38, 0x59,
-0xb9, 0xd5, 0x92, 0x7d, 0x0a, 0xe9, 0x3f, 0xd9,
-0xf7, 0x2f, 0x81, 0x41, 0x25, 0xc3, 0x0f, 0x81,
-0x6f, 0x12, 0x42, 0xc5, 0xa5, 0xae, 0xfa, 0x93,
-0xd3, 0x7f, 0x92, 0x26, 0xff, 0xa8, 0x64, 0xf0,
-0x1a, 0xe6, 0x27, 0xbc, 0x82, 0x3c, 0xa1, 0xe2,
-0x5b, 0x99, 0x99, 0xf5, 0x9f, 0x7e, 0x7e, 0x3e,
-0x81, 0x1c, 0x42, 0x3b, 0x11, 0x61, 0x0e, 0xfc,
-0x1a, 0x2f, 0xf7, 0x8a, 0xeb, 0xd9, 0x0a, 0x4b,
-0xf6, 0x29, 0xa4, 0xff, 0xcc, 0x33, 0xea, 0xad,
-0x4a, 0xaa, 0xc7, 0xd9, 0xe2, 0xa7, 0x4c, 0x63,
-0x0c, 0xde, 0x9b, 0x45, 0xff, 0xa1, 0x4d, 0x6a,
-0x55, 0x5f, 0xf9, 0xf8, 0x9a, 0x6f, 0xc1, 0xb1,
-0x7d, 0xcb, 0xa2, 0x81, 0x49, 0xb6, 0x19, 0xa6,
-0xf2, 0xfa, 0x97, 0xe6, 0xe4, 0x1f, 0xba, 0xc9,
-0x39, 0xfc, 0x86, 0xf0, 0x55, 0xf8, 0x7e, 0xe5,
-0x3a, 0xd5, 0x00, 0x9b, 0x99, 0xf9, 0x07, 0x4c,
-0xfe, 0x39, 0xfa, 0x5d, 0x0d, 0xd5, 0x54, 0xdd,
-0xdf, 0x74, 0x1b, 0xe6, 0x6f, 0x41, 0x55, 0xae,
-0xf9, 0x0e, 0xfd, 0xc7, 0xac, 0x3f, 0x54, 0x6f,
-0xf4, 0x40, 0x07, 0xf6, 0x03, 0xdf, 0x40, 0x0e,
-0x5a, 0x7e, 0x3c, 0x53, 0x0e, 0xfd, 0xc7, 0xec,
-0x2f, 0xe4, 0x74, 0x5f, 0xef, 0x3d, 0x9e, 0xa8,
-0x6b, 0x0f, 0x0c, 0x74, 0xd7, 0xba, 0x78, 0xe6,
-0x7c, 0x4e, 0xff, 0x31, 0xf9, 0x07, 0x49, 0x49,
-0xe1, 0x03, 0xb8, 0xa4, 0x12, 0x83, 0xa6, 0x8d,
-0x5b, 0xff, 0xb1, 0xd6, 0x67, 0xe4, 0xcb, 0xa6,
-0x9e, 0xaf, 0xb1, 0x17, 0x94, 0x11, 0xa6, 0x1e,
-0x44, 0x99, 0x0d, 0x29, 0x33, 0xeb, 0x3f, 0x18,
-0x0c, 0xfe, 0x89, 0xde, 0xd4, 0xf7, 0x4a, 0x12,
-0x25, 0x87, 0xbc, 0xbc, 0x3f, 0x81, 0x16, 0x16,
-0xe0, 0x19, 0x07, 0xff, 0x30, 0x74, 0x3e, 0x19,
-0x4c, 0xe1, 0xed, 0x38, 0x78, 0x13, 0xff, 0x4c,
-0x85, 0xb7, 0xf6, 0x4a, 0xfc, 0x13, 0x80, 0x52,
-0x85, 0x04, 0xad, 0x1f, 0xfc, 0x54, 0x88, 0xe6,
-0xae, 0xa0, 0xff, 0x18, 0xf9, 0x80, 0x49, 0xb7,
-0x4a, 0x31, 0xcd, 0x10, 0xa0, 0xe7, 0x2b, 0xdf,
-0xdf, 0x9c, 0xfe, 0x43, 0xf8, 0xc7, 0xf0, 0xb7,
-0x2c, 0xca, 0x1e, 0x21, 0xfd, 0xfd, 0x05, 0x58,
-0x92, 0x26, 0xfd, 0xdd, 0x75, 0xbf, 0x83, 0x6c,
-0xde, 0xb8, 0xea, 0x2b, 0x94, 0xbd, 0xed, 0xda,
-0x0d, 0x13, 0x78, 0x99, 0xd2, 0x33, 0xc2, 0x36,
-0xe1, 0x4f, 0xf0, 0xaa, 0x94, 0x78, 0x31, 0x97,
-0x48, 0x19, 0xbb, 0x3e, 0x60, 0xf8, 0xd8, 0xa2,
-0x9d, 0x0d, 0xd0, 0x85, 0x57, 0x28, 0x04, 0xdb,
-0x5a, 0x54, 0x32, 0x92, 0x21, 0x85, 0x28, 0x68,
-0xeb, 0x3f, 0xf6, 0x79, 0xe4, 0x8b, 0x46, 0x20,
-0x0e, 0x7e, 0xea, 0x14, 0x86, 0x43, 0xb0, 0x08,
-0x78, 0x44, 0x5e, 0x34, 0x08, 0xff, 0xa4, 0xf9,
-0x43, 0x48, 0xcc, 0xf9, 0x6b, 0xc5, 0x9f, 0xf2,
-0x4f, 0x56, 0x2d, 0xd9, 0xc0, 0x3f, 0x8a, 0xef,
-0xf4, 0xee, 0x48, 0x90, 0x68, 0xd1, 0x11, 0xff,
-0x2e, 0x14, 0x28, 0xc0, 0x3f, 0xa4, 0xff, 0x66,
-0xd5, 0x86, 0x03, 0x90, 0xc1, 0x0d, 0xb5, 0xe2,
-0xcf, 0x4a, 0x03, 0x70, 0x1e, 0xdd, 0xa3, 0x89,
-0x8f, 0x0a, 0x01, 0x37, 0xff, 0xe8, 0x26, 0xff,
-0xd0, 0x20, 0x64, 0x48, 0x2a, 0xad, 0x84, 0x5c,
-0x58, 0x26, 0x0b, 0xea, 0x3f, 0x70, 0xd0, 0x3a,
-0x7d, 0xfb, 0xd4, 0x13, 0x77, 0xd5, 0x55, 0x49,
-0x7d, 0xac, 0xb9, 0xac, 0x98, 0x10, 0x82, 0xd6,
-0x3f, 0xed, 0xd0, 0x7f, 0x8a, 0x44, 0x35, 0xbb,
-0x49, 0x0d, 0x76, 0x84, 0xe7, 0x28, 0x6b, 0x07,
-0xd0, 0xcf, 0xf0, 0x61, 0x58, 0x32, 0x5a, 0x13,
-0xf2, 0x04, 0x2c, 0xd7, 0x72, 0xfc, 0xa3, 0x17,
-0x7d, 0xc7, 0x0a, 0x42, 0x4c, 0xc1, 0x9a, 0x2f,
-0xba, 0x36, 0x89, 0xa4, 0xc0, 0x43, 0x4c, 0x60,
-0x92, 0x24, 0x86, 0x88, 0xe2, 0xf9, 0xfc, 0x13,
-0x35, 0xf9, 0x87, 0x36, 0xfd, 0x51, 0xb5, 0x13,
-0x2f, 0x20, 0x86, 0xd7, 0xbc, 0x21, 0xf2, 0xff,
-0x3d, 0x7a, 0xcc, 0x12, 0x46, 0x1c, 0xfa, 0x0f,
-0x88, 0x16, 0xed, 0x60, 0xd0, 0xd4, 0xfa, 0x56,
-0xa9, 0x9e, 0x35, 0x47, 0xf8, 0x5d, 0x82, 0x08,
-0xaf, 0x64, 0xf5, 0x9f, 0x69, 0xfc, 0x73, 0x5f,
-0x36, 0x3e, 0x1e, 0xaa, 0xff, 0xec, 0xb4, 0xe3,
-0xf3, 0x3f, 0xec, 0xad, 0x33, 0xf2, 0x8f, 0x01,
-0xe1, 0x48, 0x67, 0x56, 0xa8, 0x3b, 0x07, 0xd8,
-0x8f, 0x92, 0xaf, 0x13, 0x02, 0x37, 0x88, 0x7d,
-0x26, 0xfd, 0x87, 0x16, 0x8d, 0x93, 0x70, 0x3f,
-0xaa, 0x55, 0x89, 0xf1, 0x7f, 0x98, 0xf0, 0x8f,
-0xee, 0x2c, 0x44, 0x2e, 0xfd, 0xc7, 0xa4, 0x9d,
-0xa7, 0xf1, 0x82, 0x28, 0x31, 0xde, 0x34, 0xdc,
-0x24, 0x85, 0xc5, 0x0e, 0x85, 0x4b, 0xff, 0x31,
-0x8a, 0xb6, 0x12, 0x8b, 0x24, 0xff, 0x20, 0xac,
-0x40, 0x23, 0x46, 0x18, 0xf9, 0x7a, 0x8f, 0x38,
-0x0b, 0xff, 0x24, 0xd9, 0x4b, 0xf8, 0x5c, 0x74,
-0xe5, 0x11, 0xe9, 0x1c, 0xc1, 0x9e, 0x13, 0xd0,
-0x84, 0xc5, 0x71, 0xc1, 0x5f, 0x88, 0x7f, 0xf2,
-0x6e, 0x1f, 0x76, 0x62, 0xf6, 0xa8, 0xd1, 0xa1,
-0x96, 0x74, 0xc4, 0x67, 0xe6, 0x1f, 0xda, 0xd4,
-0xce, 0xc2, 0xf1, 0x64, 0x5d, 0x54, 0x4a, 0x20,
-0x1f, 0x7c, 0x00, 0xcd, 0xad, 0x62, 0x15, 0xbb,
-0x10, 0xcf, 0xc4, 0x3f, 0xb4, 0xc9, 0x0e, 0x2b,
-0x4f, 0x84, 0x57, 0xb4, 0x0a, 0xb4, 0xfe, 0x6c,
-0x27, 0x15, 0x86, 0x4f, 0x78, 0x17, 0xce, 0xc6,
-0x3f, 0x59, 0xbd, 0x91, 0x74, 0xf3, 0x3e, 0xfc,
-0x04, 0x15, 0x5a, 0xe9, 0x3f, 0xe4, 0xd6, 0x7f,
-0xb8, 0x5c, 0xf7, 0x17, 0x0f, 0x80, 0x4f, 0x15,
-0xaa, 0x2a, 0x44, 0x02, 0x42, 0xa4, 0x62, 0x57,
-0x79, 0xb8, 0x42, 0xfc, 0xb3, 0x29, 0xe7, 0xaf,
-0x79, 0xff, 0x45, 0xf8, 0x67, 0x9c, 0x84, 0x25,
-0x40, 0x1a, 0x71, 0x81, 0xfb, 0xaf, 0xbf, 0xb0,
-0xfd, 0x7d, 0xdb, 0xd0, 0x7f, 0xa4, 0x34, 0x71,
-0xfc, 0x92, 0x01, 0x42, 0x0e, 0xfe, 0x71, 0xdc,
-0x7f, 0x5d, 0x84, 0x77, 0xac, 0xf9, 0x6f, 0xc0,
-0xd5, 0x86, 0x81, 0x8f, 0x43, 0x4b, 0x54, 0x7a,
-0x9f, 0xad, 0x47, 0xc7, 0x0b, 0xf0, 0x0f, 0xd7,
-0x65, 0x42, 0xce, 0xb8, 0xc1, 0x3f, 0x42, 0x0c,
-0xe9, 0xc8, 0x18, 0xe1, 0x91, 0x02, 0x5d, 0xf9,
-0xfc, 0xc3, 0x13, 0xfe, 0xd9, 0x65, 0xd1, 0xce,
-0x76, 0xc6, 0xa7, 0xce, 0x95, 0x63, 0xc7, 0xa8,
-0xbf, 0xed, 0x42, 0x15, 0x29, 0xbc, 0x1d, 0x2e,
-0xfd, 0x87, 0xf0, 0xcf, 0x76, 0x8b, 0x76, 0x1e,
-0x01, 0xef, 0x8d, 0xc2, 0xc3, 0x46, 0x60, 0x83,
-0x74, 0x9a, 0xcf, 0x7a, 0xe4, 0xe4, 0x9f, 0x61,
-0x6b, 0xff, 0xc7, 0xe0, 0x68, 0x64, 0x85, 0x89,
-0x31, 0xc6, 0xb6, 0x1f, 0x16, 0x7c, 0x70, 0xdc,
-0xa5, 0xff, 0x30, 0x7d, 0x0e, 0xda, 0xe9, 0xa5,
-0xf7, 0x65, 0xec, 0x70, 0x76, 0x44, 0x28, 0xa4,
-0xff, 0xc8, 0x36, 0x6d, 0x9e, 0x96, 0x53, 0xd0,
-0x08, 0x7f, 0x49, 0xef, 0x97, 0x53, 0xc6, 0x8d,
-0x64, 0x2e, 0xfe, 0x4e, 0xfe, 0x69, 0x50, 0xb2,
-0x90, 0x33, 0xc9, 0x3d, 0xa8, 0x53, 0xfd, 0xc7,
-0xd3, 0x80, 0x76, 0xc0, 0x92, 0x1e, 0x0f, 0x25,
-0xc6, 0x0f, 0xdd, 0xfc, 0xf3, 0x57, 0x4a, 0xf6,
-0x50, 0xbc, 0x11, 0x8d, 0x0f, 0x19, 0x85, 0x5a,
-0xa4, 0xdf, 0x4f, 0xd0, 0xc9, 0x5f, 0x13, 0x67,
-0xe4, 0x1f, 0x7a, 0x48, 0xd3, 0x68, 0x27, 0x57,
-0xab, 0x91, 0xd3, 0x57, 0x45, 0xde, 0x5f, 0xc8,
-0xfc, 0x1f, 0xa3, 0x79, 0x96, 0x90, 0x9b, 0xcf,
-0x3f, 0x06, 0xe4, 0x8c, 0xc2, 0x6b, 0xf8, 0x86,
-0xa8, 0x70, 0x89, 0x9d, 0x0f, 0xaf, 0x75, 0xac,
-0x4a, 0x06, 0xd6, 0x0b, 0xf3, 0x0b, 0xf1, 0x4f,
-0x7f, 0xae, 0x89, 0xff, 0x91, 0x23, 0xc6, 0x33,
-0x66, 0x7f, 0xc7, 0x65, 0x7b, 0x0a, 0xf2, 0x4f,
-0xf5, 0x17, 0xc6, 0xb7, 0x35, 0xc8, 0xb2, 0x17,
-0xc8, 0x6b, 0xfb, 0x52, 0xbd, 0x6d, 0x2b, 0x6d,
-0x5b, 0xf4, 0xfe, 0xeb, 0xfd, 0x5c, 0xff, 0x72,
-0xf2, 0x4f, 0xaf, 0xfa, 0x1b, 0xb2, 0xc9, 0x72,
-0xb2, 0x7f, 0x52, 0x76, 0x96, 0x6b, 0x9e, 0x2d,
-0x16, 0xcf, 0xdc, 0x1c, 0xab, 0x2a, 0xc4, 0x3f,
-0xbd, 0xd9, 0xb7, 0xb3, 0x8a, 0x0c, 0x3c, 0x2e,
-0xd7, 0x86, 0xf9, 0x0c, 0x2d, 0x53, 0xdc, 0x62,
-0x5c, 0xba, 0x35, 0x57, 0xaf, 0x9c, 0xfc, 0x93,
-0x82, 0x87, 0x4c, 0x35, 0xe3, 0x28, 0xc4, 0xa3,
-0xbe, 0x34, 0x09, 0x63, 0xb6, 0xbf, 0xd7, 0xe7,
-0x1a, 0xbd, 0x83, 0x7f, 0x8a, 0xfa, 0xad, 0x26,
-0xa2, 0xc3, 0x7e, 0xb5, 0x4e, 0x17, 0x3f, 0x5b,
-0x9b, 0x2d, 0x9b, 0x83, 0xb9, 0xfe, 0xe5, 0xb8,
-0xff, 0x22, 0xb5, 0xc3, 0x1c, 0xbc, 0xf6, 0xb4,
-0xf2, 0xa5, 0xfa, 0x1f, 0x61, 0x69, 0x20, 0x3e,
-0x9e, 0x1d, 0x89, 0x17, 0xe2, 0x1f, 0x92, 0x22,
-0x9f, 0x58, 0xfd, 0xee, 0x2d, 0x58, 0x16, 0x25,
-0x46, 0x3d, 0x2d, 0xe3, 0x03, 0x65, 0xed, 0x6c,
-0x33, 0x9e, 0x82, 0xab, 0xa7, 0xf3, 0x4f, 0x07,
-0xf7, 0xed, 0x70, 0xb6, 0x49, 0xbd, 0xc2, 0x75,
-0x6b, 0xde, 0x8d, 0x02, 0xbd, 0x38, 0x36, 0x14,
-0x89, 0x44, 0xae, 0xff, 0xea, 0x0e, 0xfd, 0x47,
-0x51, 0xb2, 0xea, 0xc4, 0x19, 0xa5, 0x7b, 0xbb,
-0x97, 0x1a, 0x4f, 0xd3, 0x69, 0x6a, 0x76, 0xfe,
-0xc2, 0x7c, 0xfe, 0x01, 0x43, 0xfd, 0x98, 0x1b,
-0x22, 0x41, 0xa3, 0xef, 0x5f, 0xa4, 0x3f, 0x76,
-0x19, 0xc4, 0x28, 0xc8, 0xdf, 0xe6, 0x0a, 0xf0,
-0x8f, 0x18, 0x95, 0xcf, 0x5b, 0x4e, 0xbd, 0x0e,
-0x87, 0xd4, 0x75, 0x99, 0x35, 0x49, 0xea, 0x26,
-0x94, 0x6d, 0x31, 0xfa, 0xcb, 0x8a, 0x3c, 0xfe,
-0xf9, 0x4e, 0xc2, 0x52, 0x33, 0xd2, 0x9e, 0xcf,
-0x09, 0x9a, 0x10, 0x63, 0x8b, 0x9b, 0x7f, 0xdc,
-0xf7, 0x5f, 0x93, 0xec, 0xbd, 0x70, 0x39, 0xb6,
-0x4c, 0x27, 0xa0, 0x78, 0xaf, 0x8b, 0x9f, 0xf3,
-0xef, 0xbf, 0x82, 0xa7, 0x09, 0xe4, 0x04, 0x61,
-0x10, 0x7b, 0xe9, 0xf7, 0x7f, 0x6c, 0xec, 0xc9,
-0xdd, 0x7f, 0x39, 0xea, 0x8f, 0xdd, 0x8f, 0xda,
-0x60, 0x10, 0x91, 0xf3, 0x05, 0xa8, 0xad, 0x00,
-0xef, 0xe5, 0xe9, 0x3f, 0x24, 0x68, 0xc5, 0x01,
-0x18, 0x1c, 0x5e, 0xa4, 0x91, 0xf5, 0x03, 0x2e,
-0xfe, 0x74, 0xdc, 0x7f, 0x55, 0x67, 0x3f, 0xf4,
-0xd0, 0xd5, 0x9b, 0xe5, 0x0c, 0x6e, 0xd4, 0xa4,
-0xbe, 0x92, 0xcd, 0xd3, 0xf9, 0x50, 0x28, 0x70,
-0xff, 0x65, 0x44, 0x83, 0xa0, 0xf1, 0x0b, 0x9a,
-0x84, 0x4b, 0x2e, 0xcf, 0x7e, 0xff, 0x45, 0x16,
-0x69, 0xa4, 0xc7, 0x70, 0x02, 0xc6, 0x55, 0x62,
-0x3c, 0x97, 0x4b, 0x4b, 0x3b, 0xdf, 0x1c, 0xfc,
-0xc3, 0x99, 0xbb, 0x5d, 0xfb, 0x32, 0x9a, 0xa8,
-0x1a, 0xd4, 0x48, 0x3e, 0xcc, 0x29, 0xb0, 0x7f,
-0x27, 0xff, 0xd0, 0x68, 0x90, 0xb0, 0x34, 0x91,
-0x68, 0x24, 0x65, 0x5e, 0x13, 0x50, 0xb6, 0xec,
-0x14, 0xbe, 0xff, 0x72, 0xf0, 0xcf, 0x29, 0xe6,
-0xf9, 0x74, 0xad, 0xde, 0x1d, 0xc9, 0x61, 0x80,
-0xad, 0x87, 0x9c, 0xcc, 0xd3, 0x7f, 0x1a, 0x4c,
-0xb5, 0x47, 0xa7, 0x86, 0x8f, 0x15, 0xf3, 0xbe,
-0xff, 0x53, 0x40, 0xff, 0xd1, 0x0c, 0xec, 0xf9,
-0x94, 0x46, 0xe3, 0x34, 0xeb, 0x8e, 0x4f, 0x41,
-0xfe, 0x99, 0x80, 0x0c, 0xcd, 0x46, 0xcc, 0xba,
-0xe3, 0x53, 0x90, 0x7f, 0xe8, 0xdb, 0x13, 0xfd,
-0xfe, 0x0f, 0xda, 0xeb, 0x7a, 0x9f, 0x2a, 0xc4,
-0x3f, 0xc5, 0xa7, 0xe0, 0x17, 0xda, 0x02, 0xdd,
-0x53, 0x53, 0xc0, 0xdf, 0x82, 0xfc, 0x33, 0xc2,
-0x3f, 0x8b, 0x15, 0x4d, 0x08, 0xc4, 0x7a, 0x5c,
-0xf9, 0x56, 0x90, 0x7f, 0xc6, 0xe1, 0x33, 0x7c,
-0x37, 0x2e, 0x1f, 0x43, 0xfe, 0xdc, 0xc8, 0xcc,
-0xfa, 0x4f, 0xa7, 0xf5, 0xf6, 0xdd, 0xc1, 0xba,
-0xbf, 0x0f, 0xe3, 0xe6, 0x1f, 0xa6, 0x97, 0xf6,
-0x3b, 0x8d, 0xf4, 0x47, 0xf9, 0xfa, 0xd9, 0xf5,
-0x9f, 0xac, 0xc8, 0xb0, 0xcb, 0x50, 0x1b, 0xbc,
-0x6a, 0xb7, 0x03, 0x63, 0x0a, 0xe9, 0x3f, 0x9c,
-0xf9, 0xb4, 0xd4, 0x78, 0xca, 0x2f, 0xa4, 0x7f,
-0xd1, 0xc7, 0xcc, 0xfc, 0xfd, 0x1f, 0x3e, 0xfb,
-0xfd, 0x1f, 0x52, 0x7f, 0xa8, 0xfa, 0x01, 0xaa,
-0x50, 0xe3, 0x71, 0xeb, 0x21, 0x0e, 0xfe, 0x29,
-0x35, 0xf5, 0x9f, 0x32, 0xd3, 0xbb, 0x15, 0xcc,
-0x4e, 0x2c, 0x28, 0x2e, 0x7f, 0x3f, 0xce, 0xf1,
-0x4f, 0xb5, 0x43, 0xcd, 0x78, 0x99, 0x18, 0x3b,
-0xdf, 0x2e, 0xa0, 0x6f, 0x38, 0xf9, 0x27, 0xcb,
-0x03, 0x69, 0x96, 0xde, 0x7f, 0x11, 0x63, 0x34,
-0xee, 0x73, 0xeb, 0x45, 0x6e, 0xfd, 0xc7, 0x50,
-0x7b, 0x48, 0xe9, 0x11, 0x3a, 0x67, 0xd5, 0x7f,
-0x80, 0x1b, 0x76, 0x79, 0xd7, 0x5a, 0x40, 0xef,
-0x2a, 0xa0, 0xff, 0x64, 0xa3, 0xb7, 0x7b, 0xd6,
-0xef, 0xff, 0xec, 0xaf, 0xea, 0x9b, 0xee, 0xdd,
-0xba, 0x3d, 0xdd, 0x1b, 0x0d, 0xd9, 0xc7, 0xb1,
-0x7f, 0xe4, 0xba, 0xff, 0xca, 0xce, 0xef, 0x27,
-0x86, 0xcc, 0xf6, 0xb9, 0xe2, 0x53, 0x90, 0x7f,
-0x68, 0xb4, 0x1b, 0x41, 0x8a, 0xb3, 0x49, 0x57,
-0xfc, 0xf3, 0xef, 0xbf, 0x48, 0xb7, 0xd2, 0x09,
-0x84, 0x3c, 0xa6, 0x12, 0xfe, 0x19, 0x47, 0xfe,
-0x2b, 0xeb, 0x3f, 0x9a, 0xf0, 0xff, 0xec, 0x5d,
-0x6f, 0x70, 0x1c, 0x45, 0x76, 0xef, 0x9d, 0x1d,
-0xcb, 0x63, 0x69, 0xa5, 0x1d, 0xdb, 0x12, 0x25,
-0x62, 0xe3, 0x5b, 0xaf, 0x05, 0xa7, 0xa3, 0xd6,
-0x6b, 0x59, 0x0a, 0x3e, 0xfe, 0x08, 0x69, 0x2c,
-0xa8, 0x94, 0x8c, 0x55, 0xe5, 0x2d, 0xc2, 0x07,
-0x92, 0xa2, 0xa8, 0x2d, 0xca, 0x1f, 0x9c, 0x2a,
-0x1d, 0x51, 0x25, 0xf9, 0xe0, 0xba, 0x23, 0x66,
-0x2c, 0x0b, 0x22, 0x63, 0x5d, 0xd0, 0x01, 0x97,
-0x38, 0x09, 0xa1, 0xd6, 0x2e, 0x7f, 0x30, 0x57,
-0xae, 0x8a, 0x64, 0x63, 0x63, 0xd9, 0x17, 0xdd,
-0x58, 0x08, 0x4e, 0x18, 0x63, 0x94, 0x40, 0x11,
-0x03, 0x2e, 0x6e, 0x21, 0x22, 0x27, 0x40, 0xe7,
-0x08, 0x63, 0x1b, 0xdb, 0xc8, 0x76, 0xba, 0x7b,
-0xa6, 0xbb, 0x5f, 0xcf, 0xf4, 0xec, 0x8e, 0x8f,
-0x4a, 0x8a, 0xaa, 0xa0, 0x4f, 0xaf, 0x76, 0xbb,
-0xd6, 0xd3, 0xcf, 0x33, 0xef, 0xfd, 0xe6, 0xf7,
-0x7e, 0xef, 0x75, 0x0a, 0x3f, 0x1d, 0x43, 0x0e,
-0x0e, 0x44, 0x4b, 0xb5, 0xe0, 0xf3, 0x72, 0xdc,
-0x5f, 0xff, 0x72, 0xfe, 0x89, 0x3c, 0xad, 0x3f,
-0x77, 0xf0, 0xf3, 0xeb, 0x28, 0xf8, 0x93, 0x69,
-0x58, 0xff, 0x72, 0x41, 0x4e, 0x67, 0xfc, 0x43,
-0xfd, 0xbc, 0x7d, 0x07, 0x36, 0x16, 0xbf, 0x60,
-0x96, 0xe5, 0x7f, 0xdc, 0xfa, 0xd7, 0x8d, 0x31,
-0x6c, 0x20, 0x95, 0xfe, 0x47, 0x63, 0xfe, 0xb1,
-0xe6, 0x5d, 0xb5, 0x68, 0x92, 0xda, 0x14, 0x6b,
-0xb3, 0xae, 0xd8, 0x3f, 0x9c, 0x4a, 0x9e, 0x52,
-0xf0, 0x3f, 0x93, 0xb5, 0x3e, 0xfe, 0x87, 0x5c,
-0xe4, 0x52, 0x74, 0x90, 0xc4, 0x9f, 0xfc, 0xb6,
-0x87, 0x4a, 0xd4, 0xbf, 0x6c, 0xf4, 0xbc, 0x49,
-0x3f, 0xb4, 0xb4, 0xa5, 0xb1, 0x83, 0xe8, 0x66,
-0x67, 0xc9, 0x03, 0x8a, 0x78, 0x25, 0xd5, 0xbf,
-0x3c, 0x7f, 0x56, 0x24, 0xd0, 0xb0, 0x91, 0x72,
-0x96, 0xd4, 0x0b, 0x37, 0x72, 0xe3, 0x3d, 0x5f,
-0xfd, 0x8b, 0xee, 0x37, 0x83, 0x2e, 0xd9, 0x38,
-0x7e, 0xf6, 0xc5, 0xf7, 0x05, 0xf4, 0x2d, 0xc7,
-0x01, 0x1f, 0xee, 0x39, 0x61, 0x0f, 0xfe, 0xf6,
-0x52, 0x0e, 0x1b, 0x83, 0x55, 0xdd, 0x01, 0xff,
-0x4c, 0xf9, 0xf9, 0x1f, 0x22, 0xe3, 0x9c, 0x23,
-0xef, 0x23, 0xc4, 0x9f, 0xad, 0x81, 0x78, 0x2e,
-0xf0, 0xd2, 0x31, 0xbd, 0xdb, 0x4d, 0x52, 0x7b,
-0x7a, 0x67, 0xf4, 0x11, 0x1b, 0x27, 0xb2, 0x81,
-0xa7, 0x82, 0xf9, 0x0b, 0xd4, 0xbf, 0xbc, 0x7c,
-0x87, 0x6f, 0xaa, 0x19, 0x34, 0xd2, 0x8f, 0x8d,
-0xbd, 0x8a, 0x7c, 0x17, 0xe0, 0x7f, 0xdc, 0xfb,
-0x0d, 0x1b, 0xc7, 0x28, 0xde, 0x2e, 0xc1, 0xff,
-0x18, 0x5e, 0x36, 0x19, 0x24, 0xfb, 0xd5, 0xa8,
-0x91, 0x09, 0xd4, 0x43, 0x8b, 0x7e, 0xfe, 0xc7,
-0x49, 0x16, 0xe3, 0x73, 0xc6, 0x79, 0xb6, 0xf1,
-0x48, 0xf8, 0xe7, 0x2a, 0xc2, 0xf7, 0x4f, 0x11,
-0x7f, 0xcb, 0xef, 0x9f, 0xb9, 0xd4, 0x5b, 0x21,
-0xf5, 0x2f, 0x02, 0x72, 0x66, 0xec, 0x11, 0x82,
-0x7f, 0xae, 0x70, 0xfc, 0xb3, 0xe8, 0x4d, 0xed,
-0x0d, 0xaf, 0xfe, 0x55, 0xc1, 0xeb, 0x5f, 0xf3,
-0xba, 0x0c, 0xb6, 0x3b, 0xfc, 0xa2, 0xd1, 0xe0,
-0xc0, 0xfd, 0x8e, 0xef, 0x7e, 0x36, 0xa4, 0xfe,
-0xe5, 0x7a, 0x0f, 0xff, 0xbe, 0x43, 0x85, 0x40,
-0xde, 0x27, 0x53, 0x69, 0x0f, 0x9a, 0xce, 0x0a,
-0x7c, 0x52, 0x07, 0xf3, 0xaf, 0x4d, 0xd1, 0x60,
-0x26, 0xc6, 0xdc, 0x62, 0x7d, 0x10, 0x52, 0xff,
-0x92, 0xbc, 0xc1, 0x8d, 0x0b, 0x5a, 0x98, 0xfe,
-0xd9, 0xa9, 0xe1, 0xde, 0x6e, 0xda, 0x26, 0xf2,
-0x7b, 0xca, 0x83, 0xee, 0x5f, 0x48, 0xf5, 0xaf,
-0xcf, 0xf9, 0xff, 0xbe, 0x99, 0x75, 0x76, 0xcc,
-0x8a, 0xeb, 0x3f, 0xc3, 0xf8, 0x9f, 0x0b, 0x81,
-0xfa, 0x97, 0x8b, 0x76, 0x2c, 0xec, 0x8d, 0xdb,
-0x84, 0x7f, 0x3e, 0x61, 0xfc, 0xcf, 0x2c, 0xcf,
-0x77, 0xa4, 0xfe, 0x25, 0x57, 0x7f, 0x00, 0x0d,
-0xf2, 0x2e, 0xe3, 0x7f, 0xe6, 0xb8, 0xfe, 0x73,
-0x9d, 0x91, 0xb0, 0xbe, 0x74, 0xd5, 0x3e, 0x04,
-0xed, 0x2c, 0x25, 0x68, 0x87, 0xe1, 0x9f, 0x7b,
-0xc6, 0x53, 0x9c, 0xff, 0x61, 0xeb, 0xad, 0x1b,
-0x81, 0x7f, 0x08, 0x90, 0x7e, 0xfa, 0xfc, 0x0e,
-0xee, 0x1f, 0x4e, 0x24, 0x4e, 0xf2, 0xf8, 0xf0,
-0x0b, 0x88, 0x7f, 0x2e, 0xa3, 0xe6, 0x63, 0xc9,
-0xfd, 0xf1, 0x19, 0x71, 0x7f, 0x7a, 0xfe, 0x19,
-0x13, 0xf8, 0xe7, 0x67, 0x52, 0xb4, 0x3c, 0x28,
-0x85, 0x91, 0xd3, 0xf8, 0x55, 0xeb, 0x0e, 0x8a,
-0x7f, 0x38, 0xbe, 0xb2, 0xad, 0x17, 0x0c, 0x80,
-0x76, 0x96, 0x17, 0xab, 0x7e, 0x5c, 0xc1, 0x61,
-0xcf, 0x49, 0xcd, 0xdb, 0xef, 0x84, 0x0a, 0xff,
-0xcc, 0xa0, 0x03, 0x76, 0x83, 0x78, 0xac, 0x76,
-0x60, 0x23, 0xed, 0x51, 0x91, 0xef, 0x23, 0x35,
-0xfe, 0x31, 0x9b, 0x25, 0xd8, 0x73, 0x09, 0x1d,
-0x67, 0xf8, 0x87, 0x5d, 0x3f, 0xa8, 0x7f, 0x61,
-0x23, 0x27, 0xa7, 0x21, 0x22, 0x84, 0xbe, 0xd3,
-0xc5, 0x3f, 0xec, 0xfa, 0x01, 0xff, 0x43, 0x68,
-0x81, 0x66, 0x2b, 0xf9, 0x07, 0xb4, 0x3e, 0x02,
-0x89, 0x02, 0x82, 0x7f, 0xd8, 0xf5, 0x03, 0xfe,
-0x67, 0x0a, 0x6d, 0x37, 0x88, 0xfe, 0xb9, 0x43,
-0xe0, 0x9f, 0xd4, 0xf6, 0x12, 0xfc, 0xcf, 0x14,
-0xe5, 0x7f, 0xd6, 0x03, 0xbc, 0x34, 0x6e, 0x7a,
-0xeb, 0x4f, 0xf2, 0xfb, 0x0d, 0x09, 0xfe, 0xe7,
-0x55, 0xfc, 0x72, 0x48, 0xf5, 0xcf, 0xe2, 0x13,
-0xcd, 0xe3, 0x43, 0x8e, 0xcf, 0x63, 0xcb, 0x41,
-0xfd, 0x8b, 0xf3, 0x3f, 0x04, 0xff, 0xac, 0x61,
-0x9f, 0xf8, 0xf8, 0x9f, 0x53, 0x37, 0x89, 0xfd,
-0x6a, 0xe7, 0xd1, 0x28, 0xc6, 0x03, 0x22, 0xad,
-0x9f, 0xf7, 0x8c, 0xc5, 0xfe, 0xfa, 0x97, 0xa7,
-0x8e, 0x3e, 0x4f, 0xd4, 0xd1, 0x93, 0xdb, 0xf8,
-0x27, 0xef, 0xa2, 0x00, 0xff, 0xb3, 0xd9, 0x2c,
-0xea, 0x00, 0xed, 0xec, 0x26, 0xf8, 0x87, 0xc3,
-0x9e, 0xff, 0xb4, 0x19, 0xff, 0xc3, 0xe3, 0x8f,
-0x01, 0xea, 0x5f, 0xa9, 0x11, 0xbb, 0x51, 0x02,
-0x42, 0xaf, 0xa6, 0xb6, 0x32, 0xfd, 0x33, 0xf3,
-0xbf, 0x84, 0x7f, 0x8e, 0x12, 0x3e, 0x8d, 0x18,
-0x77, 0xb8, 0x08, 0x93, 0xfb, 0xf3, 0x35, 0xbe,
-0xbe, 0x50, 0x07, 0xae, 0x9f, 0xa8, 0xbb, 0xe7,
-0x03, 0x18, 0xf3, 0x5b, 0x27, 0xc0, 0xff, 0x4c,
-0x4b, 0xfc, 0x8f, 0xc3, 0x8c, 0x98, 0xe7, 0x31,
-0xef, 0xab, 0xb3, 0x21, 0xf8, 0xc7, 0x6e, 0x8e,
-0x6d, 0x80, 0xf7, 0x9b, 0xed, 0xf9, 0x7f, 0xcc,
-0x57, 0xff, 0xf2, 0xd0, 0xce, 0x21, 0xb4, 0xdb,
-0x05, 0x42, 0xde, 0x27, 0x97, 0xd0, 0x53, 0xa1,
-0xf8, 0xa7, 0xc9, 0x3c, 0xa1, 0xef, 0x27, 0xef,
-0x0b, 0xb7, 0xf7, 0xf2, 0x27, 0xe8, 0x24, 0x6b,
-0x54, 0x79, 0x43, 0xc5, 0xff, 0x9c, 0xb6, 0x47,
-0x0d, 0x82, 0x1f, 0x7a, 0xc9, 0xf3, 0x5b, 0x4d,
-0x19, 0xa1, 0x94, 0x57, 0xc8, 0x2e, 0xf2, 0xf8,
-0xb0, 0xb7, 0x7f, 0x19, 0x43, 0x3b, 0xbf, 0xb1,
-0x2f, 0xd8, 0xab, 0x89, 0xfe, 0x99, 0xcb, 0x7e,
-0x3e, 0xb4, 0x7e, 0xed, 0x7e, 0xf5, 0x71, 0x50,
-0xff, 0xe3, 0xc6, 0x93, 0x36, 0xe7, 0xe9, 0x02,
-0x12, 0x69, 0x4e, 0x63, 0xf8, 0x47, 0xbc, 0xff,
-0x32, 0xfc, 0x83, 0xf3, 0x97, 0x79, 0xce, 0x6e,
-0x29, 0x56, 0xfd, 0x49, 0x95, 0x9b, 0xbf, 0xde,
-0xba, 0xb8, 0xe2, 0x02, 0x6b, 0xe4, 0x11, 0xfc,
-0x8c, 0xa7, 0xff, 0x71, 0xa3, 0xcd, 0x41, 0x13,
-0x5f, 0x7f, 0x2e, 0xce, 0x77, 0x74, 0xca, 0xf2,
-0xae, 0xff, 0xb3, 0x0a, 0xb6, 0x1e, 0x39, 0x4b,
-0x0d, 0xbe, 0xfe, 0x97, 0x68, 0x17, 0x5e, 0x2f,
-0xf0, 0xde, 0xbb, 0xac, 0x70, 0x1f, 0xa8, 0x7f,
-0xb9, 0x61, 0x67, 0x88, 0xf8, 0xd3, 0x04, 0xf9,
-0x9d, 0xc5, 0x73, 0x11, 0xaf, 0xf6, 0xd6, 0xf1,
-0xfd, 0xce, 0xa1, 0xb3, 0x6e, 0xff, 0x08, 0xcf,
-0x2f, 0x6f, 0xb2, 0xf8, 0xf9, 0x99, 0xbf, 0xfe,
-0xe5, 0xf9, 0x27, 0x35, 0x4a, 0xd6, 0x0b, 0xff,
-0x30, 0x61, 0x86, 0x54, 0xff, 0x32, 0x78, 0x3c,
-0xbf, 0x8a, 0x7e, 0xe8, 0x24, 0x1d, 0x28, 0xf3,
-0x78, 0xcb, 0x35, 0x26, 0x00, 0xff, 0xd3, 0x2d,
-0xf2, 0xef, 0x11, 0xfb, 0x56, 0x67, 0xc7, 0x40,
-0x2f, 0xd7, 0xff, 0x14, 0xd1, 0x8e, 0x79, 0xf4,
-0xab, 0x69, 0xa8, 0xff, 0x81, 0xeb, 0x6f, 0x71,
-0x76, 0xf4, 0x6b, 0x33, 0x31, 0x96, 0xaf, 0xcd,
-0x1d, 0xa1, 0xf8, 0x87, 0xf8, 0xe7, 0x08, 0x89,
-0xc6, 0x68, 0x11, 0xd7, 0xff, 0x4c, 0x33, 0xff,
-0x8c, 0xf1, 0xf8, 0x83, 0x7e, 0x0a, 0xd0, 0xdd,
-0x11, 0x74, 0x83, 0xf3, 0x34, 0xdb, 0x6f, 0xd5,
-0x10, 0xce, 0x47, 0xc4, 0x3f, 0x1b, 0x86, 0x16,
-0x3b, 0x42, 0xff, 0x53, 0x0d, 0xd2, 0x3a, 0xed,
-0xdf, 0x71, 0x54, 0xf8, 0x67, 0x2b, 0xf3, 0x27,
-0xc7, 0x3f, 0x13, 0xf1, 0xab, 0xfa, 0xb5, 0x86,
-0x16, 0x09, 0x36, 0x87, 0xf3, 0x3f, 0x84, 0xf6,
-0x39, 0x83, 0x0e, 0x4f, 0xa6, 0x25, 0xda, 0x27,
-0x9c, 0xff, 0xb1, 0xaa, 0x1a, 0xb5, 0x13, 0xd8,
-0x2d, 0x29, 0x09, 0xe6, 0x85, 0xf3, 0x3f, 0x39,
-0x82, 0xaf, 0xf0, 0x6b, 0x6c, 0x5a, 0x82, 0x91,
-0xe1, 0xfa, 0x9f, 0x9e, 0x64, 0x3f, 0x71, 0x4b,
-0x47, 0xb3, 0x04, 0x0b, 0x39, 0x7e, 0x0e, 0xd4,
-0xbf, 0x72, 0x14, 0x16, 0xce, 0x99, 0xbf, 0x52,
-0x03, 0x21, 0x3f, 0xff, 0x83, 0x83, 0x12, 0xfe,
-0x7d, 0xfd, 0x27, 0x56, 0x88, 0xde, 0x0c, 0xd6,
-0xbf, 0x32, 0x2e, 0xfb, 0xb7, 0x13, 0xdf, 0xa8,
-0xc3, 0xbe, 0xcb, 0x0e, 0xe5, 0x7f, 0x48, 0x5b,
-0x9c, 0xc2, 0x2d, 0xa5, 0xf8, 0x9f, 0x07, 0x31,
-0x1e, 0x38, 0xe8, 0xa3, 0x41, 0x42, 0xf9, 0x1f,
-0x0c, 0x72, 0x4c, 0x82, 0x7f, 0xac, 0xd6, 0x09,
-0x48, 0xfb, 0x84, 0xf3, 0x3f, 0xc8, 0x85, 0xcd,
-0x66, 0x08, 0x50, 0x0c, 0xf0, 0x3f, 0xc5, 0xc4,
-0xa0, 0xc2, 0x2d, 0x25, 0xf8, 0x1f, 0x23, 0x47,
-0xe2, 0x8f, 0xef, 0x35, 0x2a, 0x94, 0xff, 0x59,
-0x55, 0x34, 0x1e, 0xec, 0x08, 0x6e, 0x33, 0x9c,
-0xff, 0xb9, 0xdf, 0xb8, 0x01, 0x7b, 0x6f, 0xd8,
-0x0e, 0xf1, 0xa7, 0x9f, 0xff, 0x69, 0x2f, 0x24,
-0x66, 0x30, 0xec, 0xb9, 0x9a, 0xc8, 0xda, 0x4f,
-0x03, 0xfc, 0x43, 0x8c, 0xac, 0x92, 0xff, 0xd1,
-0xff, 0xc5, 0xa5, 0x7d, 0x6a, 0x64, 0xfc, 0x53,
-0xa2, 0xfe, 0xf5, 0x0c, 0x4e, 0x73, 0x5f, 0xe8,
-0xcd, 0x6b, 0xe1, 0x6b, 0x7e, 0xb8, 0xfe, 0x87,
-0xb1, 0x0d, 0xbb, 0x25, 0xda, 0xa1, 0xa4, 0xfe,
-0xa7, 0xd4, 0x7a, 0x75, 0xfd, 0x0b, 0x0d, 0xc7,
-0x82, 0xfd, 0x5f, 0xe1, 0xfa, 0x1f, 0xb2, 0xbb,
-0x66, 0xf5, 0x7e, 0x41, 0xfd, 0x8b, 0xe2, 0x9f,
-0xbb, 0x29, 0x9f, 0xa3, 0x5f, 0xb3, 0xe4, 0x6d,
-0x2a, 0xf9, 0x1f, 0xd2, 0xff, 0xd5, 0xb6, 0x36,
-0x81, 0xd7, 0x9b, 0x97, 0x8c, 0x66, 0xf5, 0xfa,
-0xa0, 0xfe, 0xc7, 0x20, 0x32, 0x6c, 0x8a, 0x7f,
-0xd4, 0xfd, 0x5f, 0x72, 0xfd, 0x2b, 0x4b, 0x64,
-0x06, 0x64, 0x77, 0xa1, 0xfb, 0xf5, 0xf1, 0x3f,
-0x1d, 0x8d, 0xae, 0x8c, 0x3c, 0xbd, 0x56, 0xed,
-0x4f, 0x49, 0xff, 0x83, 0xaf, 0x3f, 0x97, 0x78,
-0x8e, 0xc0, 0x36, 0x2b, 0xe4, 0xfa, 0x03, 0xf5,
-0xaf, 0x75, 0xee, 0xfd, 0x50, 0x08, 0xf1, 0x4f,
-0x80, 0xff, 0x31, 0x5d, 0x6f, 0x5b, 0x21, 0xfe,
-0xf7, 0xeb, 0x7f, 0x32, 0x6e, 0x91, 0xf2, 0x08,
-0xc1, 0x3f, 0x80, 0xf6, 0x29, 0xc5, 0xff, 0xb8,
-0x34, 0x45, 0xea, 0x98, 0xf2, 0x79, 0x51, 0xe1,
-0x1f, 0x0c, 0x7b, 0x0e, 0xa0, 0xe5, 0x4e, 0x99,
-0xfe, 0x2f, 0x5e, 0xff, 0xc2, 0xb0, 0xc7, 0xf8,
-0x8a, 0xe0, 0x1f, 0x40, 0xfb, 0x94, 0xe2, 0x7f,
-0x4a, 0xc6, 0x13, 0xbf, 0xfe, 0xa7, 0x7d, 0x2a,
-0x79, 0x4a, 0xdb, 0x62, 0xfd, 0x6a, 0xf0, 0x80,
-0x3a, 0x7f, 0x05, 0xf4, 0x3f, 0x04, 0xf6, 0x3c,
-0x84, 0x5e, 0x6e, 0x5a, 0xad, 0x8e, 0x3f, 0xb2,
-0xfe, 0x87, 0x14, 0xf5, 0x96, 0x4c, 0x6a, 0x18,
-0x08, 0x69, 0x37, 0xb3, 0x65, 0xb2, 0xde, 0x3b,
-0x80, 0x7f, 0xce, 0x2e, 0xa9, 0xad, 0xe8, 0xd2,
-0x0f, 0x0c, 0x86, 0xe4, 0x3b, 0x59, 0xff, 0xf3,
-0x39, 0x6a, 0x1b, 0x4b, 0xd6, 0x12, 0xd8, 0x63,
-0x91, 0xf7, 0x77, 0x6d, 0xc6, 0xad, 0x38, 0xa8,
-0xfb, 0xbf, 0x20, 0xfe, 0xf9, 0x3a, 0x15, 0xe2,
-0x9f, 0x80, 0xfe, 0x87, 0xe8, 0xeb, 0x5a, 0x71,
-0xb4, 0x6f, 0x51, 0xc7, 0x73, 0x27, 0x88, 0x7f,
-0x06, 0x35, 0x92, 0x88, 0x49, 0xfe, 0xed, 0x50,
-0xe8, 0x99, 0x03, 0xf8, 0xa7, 0xd2, 0xad, 0x76,
-0x85, 0xe4, 0x6b, 0x05, 0xfe, 0x31, 0x29, 0xcd,
-0x58, 0x0c, 0xc3, 0x03, 0xdc, 0xfd, 0xae, 0xfe,
-0xc7, 0xa9, 0x19, 0xa4, 0xb0, 0xd0, 0x9f, 0xdf,
-0xc3, 0xf4, 0x3f, 0x4e, 0x32, 0xa7, 0xd8, 0x66,
-0x39, 0xfe, 0xe7, 0x1a, 0xe1, 0x7f, 0x88, 0x0c,
-0x86, 0xf7, 0x7f, 0x05, 0xf8, 0x1f, 0xdb, 0x0c,
-0xa0, 0x9d, 0x8e, 0x6b, 0x96, 0xab, 0x08, 0x4a,
-0xcf, 0xd8, 0xa4, 0x11, 0xbe, 0x26, 0xa4, 0xfe,
-0xc5, 0x8d, 0x81, 0xd8, 0xb3, 0x8c, 0x11, 0xda,
-0x16, 0x82, 0x7f, 0x7c, 0x6e, 0xac, 0xf2, 0x0c,
-0x93, 0x94, 0x1a, 0x2b, 0x15, 0xf8, 0x87, 0x79,
-0x63, 0x8d, 0x6b, 0x30, 0xbd, 0x9c, 0xf9, 0x46,
-0x09, 0xfd, 0x0f, 0xf1, 0xc6, 0xf7, 0x22, 0xe2,
-0x1f, 0xc9, 0xdb, 0x99, 0xd4, 0x07, 0x5a, 0x19,
-0xfc, 0x03, 0xae, 0x7f, 0x3f, 0x7e, 0x5f, 0x88,
-0x80, 0x7f, 0x80, 0x7f, 0x12, 0xe8, 0x59, 0xce,
-0x60, 0x94, 0xaa, 0x7f, 0xa1, 0x97, 0xfb, 0x56,
-0x7e, 0x8c, 0x8d, 0x65, 0x56, 0x04, 0xfc, 0x83,
-0xd1, 0x8e, 0xfe, 0xa5, 0xd6, 0x3a, 0x9e, 0x6c,
-0x5a, 0x91, 0xb0, 0xde, 0x2e, 0x5b, 0xff, 0x12,
-0xde, 0xe8, 0x89, 0x5f, 0xb9, 0xf7, 0x1a, 0x5a,
-0x15, 0xa5, 0xfe, 0x75, 0x14, 0x6d, 0xc1, 0x68,
-0x5c, 0xd0, 0x3e, 0x65, 0xeb, 0x5f, 0x31, 0xda,
-0x6d, 0xfa, 0xd3, 0x12, 0xfd, 0xef, 0x92, 0xfe,
-0xe7, 0xe5, 0xde, 0x95, 0xc5, 0x1d, 0x9b, 0x6f,
-0xf9, 0xd0, 0xfe, 0x9b, 0xbe, 0xf2, 0xf5, 0x2f,
-0xaf, 0xad, 0x60, 0x09, 0xbe, 0xdf, 0xfc, 0xf3,
-0x16, 0x6e, 0x09, 0xa9, 0x7f, 0x31, 0xa3, 0x54,
-0xff, 0xbb, 0xc4, 0xff, 0xc4, 0x68, 0x21, 0x2c,
-0x58, 0x8f, 0x50, 0xea, 0x7f, 0xa6, 0x5c, 0x19,
-0x0c, 0x11, 0x8a, 0xbc, 0x1e, 0x11, 0xff, 0xc4,
-0x68, 0xff, 0xf5, 0x27, 0xc6, 0x7b, 0x51, 0xf1,
-0xcf, 0xa3, 0x6e, 0xe1, 0x6c, 0x7b, 0x44, 0xfc,
-0xe3, 0x1a, 0x27, 0x98, 0x42, 0xe6, 0xd5, 0x70,
-0xfc, 0xc3, 0xbb, 0xbd, 0x28, 0xff, 0xe0, 0xef,
-0x3f, 0xf2, 0xe3, 0x1f, 0x79, 0x77, 0x9f, 0x94,
-0xc1, 0x3f, 0xe0, 0x5b, 0xaa, 0x17, 0x3a, 0x57,
-0x78, 0x1d, 0x5f, 0x76, 0x35, 0xc4, 0x3f, 0xba,
-0x1f, 0xff, 0xb8, 0x68, 0x27, 0x46, 0x8d, 0x8f,
-0xd0, 0x29, 0xf7, 0x93, 0x8f, 0x6d, 0xf7, 0xab,
-0xd8, 0xdf, 0x4a, 0xf8, 0x87, 0xed, 0x77, 0x01,
-0x35, 0x9a, 0xd2, 0xe3, 0x68, 0x6b, 0x2c, 0x63,
-0x2d, 0x30, 0x49, 0x47, 0x58, 0x78, 0xfd, 0xab,
-0xc2, 0xf3, 0xa7, 0x2b, 0x04, 0x92, 0xfd, 0xf9,
-0x24, 0x8f, 0x0f, 0x80, 0xff, 0x99, 0xd2, 0x2f,
-0x69, 0x9e, 0x9e, 0xe7, 0x75, 0xb4, 0x45, 0xba,
-0xfe, 0x69, 0xe4, 0xc3, 0x3f, 0x6c, 0xbf, 0xcb,
-0x98, 0xb1, 0xa5, 0x7c, 0xfd, 0xab, 0xe0, 0x0d,
-0x22, 0x10, 0xb4, 0x8f, 0xc0, 0x3f, 0xfc, 0xfe,
-0x97, 0xf8, 0x9f, 0x23, 0x5a, 0xb6, 0x70, 0x1f,
-0xe9, 0x67, 0x7c, 0xaa, 0x3c, 0xfe, 0x69, 0x72,
-0xcb, 0x5e, 0xe3, 0x37, 0x36, 0xf5, 0x72, 0x9a,
-0x42, 0xd4, 0xbf, 0x74, 0x15, 0xff, 0x43, 0x8c,
-0x62, 0x55, 0x8e, 0xd2, 0xb6, 0x65, 0xf1, 0xcf,
-0xe6, 0xf8, 0x0b, 0xd4, 0xa8, 0xde, 0x14, 0x3f,
-0x89, 0x7e, 0x5d, 0x1e, 0xff, 0xd0, 0xe8, 0xa1,
-0xb5, 0x3a, 0x35, 0x80, 0xdf, 0xb8, 0x1a, 0x8a,
-0x7f, 0x00, 0xda, 0x39, 0xb5, 0xf8, 0x02, 0x7a,
-0xbc, 0x3c, 0xfe, 0xa1, 0x57, 0xbb, 0xf0, 0x47,
-0x13, 0x55, 0x0f, 0x78, 0xfd, 0xef, 0x0b, 0xc8,
-0x27, 0xbf, 0x75, 0xbf, 0xfa, 0x5c, 0xc2, 0x3f,
-0x12, 0x3a, 0x5a, 0x92, 0x0f, 0xf6, 0xcb, 0x87,
-0xf1, 0x3f, 0xd4, 0x40, 0x5e, 0x7f, 0xf7, 0x02,
-0xd0, 0xdf, 0x14, 0xd0, 0x3f, 0x83, 0x68, 0x09,
-0xf6, 0x3b, 0x57, 0x0e, 0xff, 0x10, 0xa3, 0x6f,
-0x3e, 0xf8, 0xe4, 0x73, 0x35, 0xfe, 0xb9, 0x8b,
-0x47, 0xef, 0x7c, 0xd2, 0x89, 0x9f, 0x67, 0x61,
-0xfc, 0xb1, 0x12, 0xf8, 0xc7, 0xcb, 0x56, 0x56,
-0xcd, 0x80, 0x36, 0x65, 0x97, 0xc3, 0x3f, 0xb7,
-0x12, 0xbd, 0x0a, 0xfd, 0x76, 0xa2, 0x6a, 0x27,
-0xfe, 0xdf, 0x8f, 0x80, 0x7f, 0x3c, 0xff, 0x58,
-0x95, 0xe6, 0xa2, 0x89, 0x32, 0xf8, 0xe7, 0xa8,
-0x84, 0x06, 0x6d, 0xa1, 0xf7, 0xee, 0x2e, 0x81,
-0x7f, 0xbc, 0xfd, 0x5a, 0x35, 0x4e, 0x2c, 0xd8,
-0xbf, 0x03, 0xf0, 0x4f, 0x9d, 0x54, 0xff, 0xba,
-0xab, 0x73, 0x40, 0xc9, 0xff, 0xc4, 0xb8, 0xff,
-0x21, 0xfe, 0x39, 0x6c, 0xa7, 0xbb, 0x8c, 0x28,
-0xfc, 0x4f, 0xa3, 0xbb, 0xbb, 0xfd, 0xe8, 0xd6,
-0x8e, 0x46, 0x35, 0xde, 0xe3, 0xfa, 0xe7, 0x79,
-0x00, 0xff, 0x1c, 0x46, 0xe9, 0xbc, 0x51, 0x86,
-0xff, 0x81, 0xf9, 0xf7, 0x52, 0xae, 0x31, 0x9f,
-0x50, 0xe1, 0xc3, 0x30, 0xfc, 0x63, 0xb7, 0xa3,
-0x72, 0xf8, 0x07, 0x81, 0xfb, 0xf3, 0xe2, 0xbd,
-0x6d, 0x56, 0x02, 0xe2, 0x2b, 0x05, 0xfe, 0xa9,
-0x03, 0xf8, 0x67, 0xc8, 0xc9, 0x76, 0x36, 0x46,
-0xe4, 0x7f, 0x28, 0x5f, 0xea, 0x36, 0x0e, 0x9c,
-0x60, 0xf8, 0xa7, 0x8c, 0xfe, 0x07, 0x1d, 0x1a,
-0x5b, 0xb9, 0xa9, 0x33, 0x22, 0xff, 0x43, 0xd0,
-0xce, 0x6c, 0x67, 0x9b, 0x95, 0x21, 0xc6, 0xdb,
-0xee, 0x20, 0x20, 0x15, 0xfe, 0xa9, 0x16, 0xfe,
-0x21, 0xc4, 0x69, 0x67, 0x34, 0xfe, 0xc7, 0xf3,
-0x3f, 0x8e, 0xde, 0x88, 0xb9, 0xa5, 0xa6, 0x3c,
-0xfe, 0x79, 0x09, 0xad, 0x44, 0x46, 0x14, 0xfe,
-0xc7, 0xdb, 0xdd, 0x41, 0x7b, 0x55, 0xde, 0x88,
-0xc4, 0xff, 0x78, 0xfe, 0xec, 0xc8, 0x9e, 0x33,
-0xa2, 0xf0, 0x3f, 0x1e, 0xda, 0xb9, 0x5a, 0x68,
-0x1f, 0xcc, 0xf8, 0xf8, 0x9f, 0x10, 0xfc, 0xe3,
-0x96, 0x21, 0x3a, 0xda, 0xb4, 0x0d, 0x11, 0xf9,
-0x1f, 0x9a, 0xdd, 0x1a, 0xb1, 0xff, 0xaf, 0x87,
-0xff, 0x69, 0xa0, 0x32, 0xe6, 0xeb, 0xe0, 0x7f,
-0xb2, 0x9d, 0xca, 0xf5, 0xa1, 0xfc, 0x4f, 0x26,
-0xd7, 0x78, 0x5d, 0xfc, 0x4f, 0x1b, 0x1a, 0x88,
-0xc2, 0xff, 0x78, 0xbb, 0xbb, 0x12, 0xbb, 0x3b,
-0x17, 0x81, 0xff, 0x11, 0xeb, 0x51, 0x7b, 0xce,
-0x88, 0xc6, 0xff, 0x54, 0x11, 0x3c, 0x30, 0x4d,
-0x1a, 0xe1, 0xcb, 0xf3, 0x3f, 0xee, 0xa6, 0x3a,
-0x88, 0x91, 0xcd, 0x19, 0x91, 0xf8, 0x1f, 0xe2,
-0xb4, 0x3d, 0xb1, 0x17, 0x53, 0xd9, 0x0e, 0xb5,
-0x3f, 0xfd, 0xfd, 0x5f, 0xee, 0xd5, 0x8e, 0xac,
-0x6b, 0xcd, 0x25, 0x22, 0xf1, 0x3f, 0xde, 0xb7,
-0xbd, 0x6d, 0x7f, 0x11, 0x8d, 0xff, 0xf1, 0xbc,
-0x6d, 0xb5, 0x99, 0x35, 0x51, 0xf8, 0x9f, 0xac,
-0xbd, 0x83, 0xa0, 0x9d, 0x51, 0xb4, 0xaa, 0xdf,
-0x88, 0xc8, 0xff, 0x90, 0xa7, 0x63, 0xd8, 0xc8,
-0xe4, 0x2a, 0x55, 0xcf, 0x8b, 0x52, 0xff, 0x7c,
-0x1a, 0x1d, 0xd4, 0x57, 0x3a, 0xca, 0xe7, 0x57,
-0x89, 0x7f, 0x3e, 0x44, 0xe7, 0xed, 0xd6, 0x7c,
-0x4d, 0x44, 0xfe, 0x87, 0xc6, 0x13, 0x9d, 0xf6,
-0x7f, 0x95, 0xe4, 0x7f, 0x40, 0xfe, 0xd2, 0x5b,
-0x9f, 0x59, 0x9d, 0xe2, 0xf9, 0xab, 0x3a, 0x14,
-0xff, 0x7c, 0xc5, 0xaf, 0x3f, 0x77, 0x9b, 0xa1,
-0xba, 0x7e, 0x14, 0xe8, 0xff, 0xf2, 0xd6, 0xc7,
-0xbf, 0xaf, 0x8e, 0x57, 0x70, 0xfe, 0x0f, 0x05,
-0x39, 0x2e, 0x8d, 0x36, 0x6c, 0x35, 0x20, 0x65,
-0xbe, 0x83, 0xfa, 0xe7, 0x7d, 0xb4, 0x48, 0xe1,
-0x76, 0x73, 0x9f, 0xba, 0xa5, 0x4f, 0x99, 0xbf,
-0x42, 0xf0, 0x0f, 0xbe, 0x5b, 0x86, 0xca, 0xf1,
-0x3f, 0xc8, 0x0d, 0xda, 0x35, 0xb3, 0x54, 0xff,
-0xd3, 0x62, 0x27, 0xca, 0xf0, 0x3f, 0xb5, 0x02,
-0xff, 0xe8, 0xc3, 0x63, 0x8d, 0x7b, 0xfd, 0xf9,
-0xeb, 0x16, 0x35, 0xff, 0xe3, 0x7e, 0x6b, 0x3f,
-0x52, 0xec, 0x57, 0xf2, 0x45, 0x12, 0xfe, 0xe1,
-0xd9, 0x6d, 0x44, 0xbf, 0xd5, 0xf1, 0xc7, 0xe7,
-0x06, 0x35, 0xff, 0xe3, 0xed, 0xb7, 0xd9, 0xc9,
-0x94, 0xe1, 0x7f, 0x40, 0xfd, 0x4b, 0x3f, 0x7f,
-0x1d, 0xfc, 0xcf, 0x29, 0x57, 0xf6, 0x9c, 0x4a,
-0x74, 0xc6, 0xdb, 0xcc, 0x08, 0xf8, 0x67, 0x67,
-0x3c, 0x8b, 0x8e, 0xf6, 0x66, 0x53, 0x95, 0x7b,
-0xa3, 0xe9, 0x9f, 0x07, 0xb5, 0x2e, 0x7c, 0x63,
-0x64, 0x71, 0x42, 0x50, 0xe8, 0xeb, 0xe4, 0xfe,
-0x2f, 0x8f, 0x7f, 0xa3, 0x8e, 0x6d, 0xaa, 0x7c,
-0x4e, 0x0b, 0x30, 0x42, 0x1d, 0x0a, 0xfe, 0xc7,
-0x8c, 0x93, 0x41, 0x49, 0xad, 0xa9, 0x2e, 0x57,
-0x3f, 0xb6, 0x45, 0x9a, 0x0f, 0xa0, 0xc0, 0x3f,
-0x9e, 0x2c, 0x0a, 0x25, 0x8b, 0x02, 0x06, 0x87,
-0xf0, 0x3f, 0x1f, 0xb8, 0x7c, 0x2c, 0x7d, 0x30,
-0x73, 0x4a, 0x7d, 0x6f, 0x38, 0xff, 0x63, 0x55,
-0xa5, 0x62, 0xdd, 0x62, 0x7e, 0x42, 0xa9, 0xfa,
-0x17, 0x75, 0x8b, 0x8d, 0xdf, 0x17, 0x82, 0x7a,
-0xb0, 0x90, 0xfa, 0x17, 0x6d, 0x84, 0x9f, 0xa9,
-0xa0, 0x13, 0x11, 0xc9, 0xd8, 0x9f, 0x50, 0xfc,
-0x93, 0x21, 0xfe, 0xc1, 0xbf, 0xaf, 0x3d, 0x86,
-0x36, 0x98, 0x71, 0x57, 0x11, 0x14, 0x82, 0x7f,
-0x6e, 0x82, 0xfe, 0x89, 0x3d, 0x6e, 0x27, 0xff,
-0x2d, 0x1a, 0xfe, 0xf1, 0xf8, 0x6a, 0x3b, 0xd9,
-0x5f, 0x5a, 0xff, 0x1c, 0x63, 0xfc, 0x33, 0x89,
-0x1e, 0xda, 0x4a, 0xbb, 0x2a, 0xaf, 0xd0, 0x4f,
-0x02, 0xfc, 0x63, 0xbe, 0x20, 0xed, 0x97, 0xcc,
-0x3b, 0x8a, 0xaa, 0x7f, 0xc6, 0x46, 0xf7, 0x44,
-0x55, 0xab, 0xc2, 0x9f, 0xa1, 0xfc, 0x4f, 0xbb,
-0x9d, 0x2c, 0xee, 0x88, 0xa4, 0x7f, 0x16, 0xb2,
-0xe7, 0x6d, 0x45, 0xb4, 0x39, 0x32, 0xff, 0x63,
-0x25, 0x77, 0x5e, 0x4f, 0xfd, 0x8b, 0x14, 0x52,
-0xaf, 0x0b, 0xff, 0x84, 0xcc, 0xeb, 0x2b, 0xc9,
-0xff, 0x94, 0xc4, 0x3f, 0xf3, 0xf2, 0x81, 0x6c,
-0x5b, 0x12, 0xff, 0x30, 0x3c, 0x30, 0x19, 0xf7,
-0x1a, 0xdb, 0x73, 0x51, 0xf1, 0x0f, 0x95, 0x3d,
-0xaf, 0xdd, 0x30, 0x49, 0x85, 0x34, 0xe5, 0xf1,
-0x8f, 0x96, 0xa2, 0x46, 0x0d, 0x33, 0x28, 0xfe,
-0x99, 0x0e, 0xc5, 0x3f, 0x83, 0x9e, 0xec, 0x59,
-0x18, 0xe5, 0xf0, 0x8f, 0xfb, 0x1f, 0x51, 0x29,
-0xe9, 0xcf, 0x5f, 0xa4, 0x46, 0x87, 0x02, 0xff,
-0xd4, 0xbb, 0x97, 0x9d, 0xab, 0xfa, 0x3b, 0xc5,
-0xf5, 0x2b, 0xf0, 0xcf, 0xf3, 0xae, 0xec, 0xb9,
-0x93, 0x16, 0xc2, 0x22, 0xeb, 0x9f, 0x43, 0x8c,
-0x20, 0xfe, 0xf1, 0xd0, 0x4e, 0x0d, 0x19, 0xd4,
-0x13, 0x19, 0xff, 0x50, 0x03, 0xe8, 0x7f, 0x4a,
-0xe1, 0x9f, 0xcd, 0xec, 0x69, 0xdd, 0x18, 0x0d,
-0xff, 0xf4, 0x28, 0x60, 0x4f, 0x59, 0xfe, 0x87,
-0xf1, 0xf9, 0x65, 0xeb, 0x5f, 0x24, 0x49, 0xb5,
-0xb1, 0x44, 0xa6, 0xa8, 0x7f, 0xe9, 0x10, 0xff,
-0x78, 0x43, 0x0e, 0x1f, 0x22, 0x6d, 0x5c, 0x44,
-0xd8, 0x5c, 0xba, 0xfe, 0xe5, 0xed, 0x77, 0x56,
-0x11, 0xa6, 0x4a, 0xf1, 0x3f, 0xb7, 0xbb, 0x6d,
-0x3e, 0xef, 0xa8, 0xeb, 0x5f, 0x3c, 0x3e, 0x70,
-0xfe, 0xe7, 0x30, 0x93, 0x95, 0x16, 0x14, 0xfa,
-0x8d, 0xcf, 0x83, 0xfa, 0x67, 0xee, 0x8d, 0xbd,
-0x8b, 0x5d, 0x63, 0xbe, 0xfb, 0x49, 0x56, 0x5d,
-0xff, 0x9a, 0xef, 0x45, 0xef, 0x31, 0x22, 0x0c,
-0x96, 0xe3, 0xf9, 0x86, 0xd9, 0x15, 0x8e, 0xe5,
-0xe7, 0x7f, 0xd6, 0xf1, 0x6c, 0x55, 0xe8, 0x8d,
-0x52, 0xff, 0xa2, 0xdf, 0xd2, 0x46, 0xb0, 0xc1,
-0x8a, 0x19, 0x23, 0xb0, 0x5e, 0x67, 0xf7, 0x03,
-0xe3, 0x7f, 0xc4, 0x74, 0x29, 0x44, 0x0c, 0xbd,
-0x5c, 0xfd, 0x0b, 0xb2, 0x5b, 0x91, 0xf0, 0x4f,
-0x8f, 0xaa, 0xfe, 0x15, 0x2b, 0x51, 0xff, 0x9a,
-0xbf, 0x05, 0xcd, 0x99, 0x2d, 0x4d, 0x89, 0x88,
-0xfa, 0x1f, 0xca, 0xff, 0x58, 0x69, 0x5b, 0xc9,
-0xff, 0xcc, 0x72, 0xff, 0x37, 0xc2, 0xfa, 0xd7,
-0x90, 0x99, 0x36, 0x94, 0xef, 0xe3, 0xa1, 0xfa,
-0xe7, 0xdd, 0x05, 0x54, 0x9a, 0xff, 0x41, 0x74,
-0xfe, 0xb0, 0x87, 0x2e, 0x46, 0xec, 0xa6, 0x66,
-0x5d, 0xe9, 0x1f, 0x7e, 0xfd, 0xbb, 0x4c, 0xc0,
-0xff, 0xe0, 0xf8, 0x6c, 0xaf, 0x52, 0xe2, 0x43,
-0x90, 0x7f, 0xc5, 0xf3, 0xa8, 0x5f, 0x4a, 0xdc,
-0x99, 0x52, 0xe2, 0x73, 0xa1, 0x7f, 0x66, 0xfd,
-0x5f, 0x2e, 0x7f, 0x95, 0x48, 0xf7, 0x29, 0xf9,
-0x2b, 0xa1, 0x7f, 0x76, 0x20, 0x1f, 0x78, 0xc4,
-0x4e, 0x2d, 0x54, 0xbe, 0x7f, 0xcd, 0xf2, 0xdb,
-0x21, 0x8f, 0x20, 0xff, 0x63, 0xaf, 0x28, 0x54,
-0xaa, 0xf8, 0x90, 0x39, 0xbe, 0x5e, 0xe2, 0x7f,
-0xce, 0xa2, 0xc3, 0x7a, 0x8d, 0x52, 0xff, 0x53,
-0xc1, 0xd6, 0x5b, 0x4b, 0x21, 0x3f, 0x66, 0xfe,
-0xeb, 0x13, 0xd5, 0x5f, 0x28, 0xf1, 0x0f, 0xdb,
-0xaf, 0x01, 0xf9, 0x9f, 0xaf, 0xed, 0x66, 0xa4,
-0x8e, 0x57, 0x42, 0xff, 0x09, 0xf9, 0x1f, 0xda,
-0x7f, 0x51, 0x9a, 0xff, 0x41, 0x90, 0xff, 0x39,
-0xd0, 0xbf, 0xbc, 0x49, 0xa9, 0xff, 0x81, 0xfa,
-0x67, 0x10, 0xcf, 0xf7, 0x5b, 0xe9, 0x07, 0x95,
-0xf1, 0xe7, 0x7d, 0x81, 0x7f, 0x74, 0x86, 0x7f,
-0x70, 0xd0, 0xbe, 0x8a, 0xbe, 0x1c, 0x4a, 0x2a,
-0xf9, 0x1f, 0xf1, 0xfb, 0x52, 0x3e, 0xea, 0x0c,
-0xc9, 0x47, 0x42, 0x4f, 0xeb, 0xce, 0x7f, 0x16,
-0x7a, 0xd7, 0xdc, 0x09, 0x25, 0xff, 0xc3, 0xd7,
-0xdb, 0xba, 0xc8, 0xb6, 0xe6, 0x88, 0x1d, 0xc6,
-0xff, 0xb0, 0xf0, 0xc3, 0xfb, 0xbf, 0xf8, 0x74,
-0xbe, 0xfe, 0x32, 0xfc, 0x4f, 0x2d, 0xc4, 0x3f,
-0x56, 0x26, 0x8c, 0x0f, 0x61, 0xbf, 0xcf, 0xfa,
-0xbf, 0xe8, 0xee, 0x2e, 0xa3, 0x65, 0xa4, 0xed,
-0x3d, 0xb8, 0x5f, 0xd1, 0xff, 0x75, 0x18, 0xf2,
-0x21, 0xd7, 0xac, 0x76, 0xeb, 0x69, 0xd5, 0x7e,
-0xcf, 0xf0, 0xf8, 0x73, 0x7b, 0x1d, 0xf0, 0xcf,
-0x5f, 0x1b, 0x2d, 0x6a, 0x3d, 0xcc, 0x19, 0xfe,
-0xfc, 0xd6, 0x23, 0xa0, 0x7f, 0xbe, 0x88, 0xd2,
-0xc6, 0x12, 0x15, 0xff, 0x23, 0xf4, 0xc9, 0x96,
-0xde, 0x07, 0x76, 0x67, 0x14, 0x3a, 0x94, 0x78,
-0xef, 0xdf, 0x63, 0x6c, 0x7d, 0xbd, 0xbe, 0x07,
-0xa2, 0x9d, 0x74, 0x88, 0x9e, 0x8a, 0x3f, 0xef,
-0xde, 0xfc, 0x43, 0x8f, 0xff, 0x19, 0x6c, 0xc6,
-0xdf, 0xaa, 0xf8, 0x1f, 0x7e, 0x3d, 0xd3, 0x52,
-0xff, 0x97, 0xdd, 0xd6, 0xa3, 0xdc, 0xef, 0x65,
-0x81, 0x67, 0x10, 0xb8, 0xdf, 0xa6, 0xad, 0x66,
-0xc4, 0xfd, 0x5f, 0xad, 0xc4, 0x3f, 0x86, 0x0e,
-0xf0, 0xcf, 0xe8, 0xe4, 0x8a, 0x5d, 0x4a, 0xfe,
-0x67, 0x8c, 0x3f, 0x5d, 0xc6, 0xcf, 0xc1, 0xf3,
-0x32, 0x82, 0x52, 0x5b, 0x79, 0x7c, 0x86, 0x81,
-0x28, 0xd8, 0xff, 0x45, 0x9f, 0xd6, 0x43, 0xc6,
-0xf2, 0x47, 0x42, 0xf8, 0x10, 0x76, 0xbf, 0x35,
-0xd6, 0x73, 0xfd, 0xf3, 0x87, 0xfa, 0xdc, 0x93,
-0x2d, 0x1f, 0x25, 0x18, 0xec, 0xa9, 0x06, 0xf8,
-0xe7, 0x38, 0x8f, 0x3f, 0x92, 0xfe, 0xf9, 0x22,
-0x1a, 0x2d, 0xc7, 0xff, 0xe4, 0xf5, 0x51, 0x91,
-0xad, 0xe6, 0xec, 0x96, 0x86, 0xe4, 0x25, 0x45,
-0xfe, 0x9a, 0x14, 0x7a, 0x63, 0x04, 0xf4, 0xcf,
-0x2f, 0xd5, 0x2f, 0xef, 0x52, 0xc5, 0x9f, 0x45,
-0x9f, 0x89, 0xe7, 0x51, 0xf0, 0x3f, 0xcf, 0xa3,
-0xe7, 0xd0, 0x72, 0x6b, 0x7d, 0x4f, 0x45, 0x70,
-0xbf, 0xaf, 0x59, 0xfc, 0x7e, 0xab, 0x75, 0xdf,
-0xee, 0xe3, 0x34, 0xdf, 0x39, 0xa9, 0x9e, 0x1d,
-0xaa, 0xf8, 0x33, 0x09, 0xf0, 0xaa, 0xbb, 0xdf,
-0xef, 0x0d, 0xc5, 0xf6, 0xa1, 0x23, 0x83, 0xcd,
-0x7f, 0x15, 0x57, 0xed, 0xf7, 0xa4, 0xa8, 0xb7,
-0x2e, 0x84, 0xdd, 0x5e, 0xd6, 0xe8, 0x03, 0x4a,
-0xff, 0x4c, 0xeb, 0x02, 0xff, 0x80, 0x78, 0xfe,
-0x35, 0x35, 0xb4, 0xe0, 0xfb, 0xfe, 0x34, 0xe7,
-0x7f, 0x8e, 0x49, 0xf5, 0x2f, 0x27, 0xdb, 0xa3,
-0xd2, 0xf3, 0xa4, 0x8b, 0xc1, 0xfe, 0x2f, 0xfa,
-0x6d, 0x7f, 0x76, 0x16, 0x1b, 0xdd, 0x0a, 0xfe,
-0x87, 0xdd, 0x3f, 0x86, 0xe9, 0xab, 0x7f, 0xa9,
-0xe2, 0x73, 0x87, 0xb8, 0x3f, 0x51, 0xbd, 0xdc,
-0xdd, 0x66, 0xc1, 0xb2, 0x97, 0xe0, 0xbb, 0x2a,
-0xb8, 0xfe, 0xb9, 0xce, 0x57, 0xff, 0x52, 0xf3,
-0x3f, 0x7f, 0x14, 0xa2, 0xff, 0x69, 0x77, 0x12,
-0xeb, 0x14, 0xfd, 0x83, 0x00, 0xff, 0xd4, 0x4b,
-0x68, 0x67, 0xd5, 0x69, 0xa3, 0x77, 0x51, 0x90,
-0xff, 0x11, 0xf8, 0x47, 0xd6, 0xff, 0xe8, 0xdd,
-0xaf, 0x18, 0x2a, 0x7e, 0x03, 0x9c, 0x7f, 0x01,
-0xeb, 0x5f, 0x47, 0xb5, 0x47, 0x1d, 0xa3, 0x74,
-0xff, 0xbb, 0x4f, 0xff, 0xd3, 0x96, 0xef, 0x1a,
-0xb8, 0x27, 0xc8, 0x3f, 0x8c, 0xf3, 0xeb, 0xf7,
-0xf5, 0x7f, 0xb5, 0x6d, 0x54, 0xeb, 0xc3, 0x95,
-0xf8, 0x07, 0x1b, 0xad, 0x6b, 0xbb, 0xfa, 0xe2,
-0x99, 0x80, 0xbe, 0xe5, 0x5c, 0x38, 0xff, 0x63,
-0xd8, 0xf1, 0x47, 0x6d, 0xff, 0xfc, 0xea, 0xb3,
-0x00, 0xff, 0x74, 0x49, 0x78, 0x18, 0xaf, 0xd7,
-0x6a, 0x02, 0xe7, 0x83, 0x00, 0xfc, 0xe3, 0x9e,
-0x7f, 0xc1, 0xb3, 0x7f, 0xde, 0x38, 0xa5, 0x3d,
-0x1c, 0x98, 0x87, 0x0c, 0xf1, 0x4f, 0x97, 0xcb,
-0xff, 0x50, 0xb4, 0x63, 0xb6, 0x5a, 0x89, 0x86,
-0x78, 0x42, 0x7b, 0x05, 0xc9, 0x42, 0x68, 0x80,
-0x7f, 0xea, 0xa0, 0x7f, 0xf4, 0xf6, 0x8d, 0xd8,
-0x38, 0x5d, 0x0a, 0xff, 0xd4, 0xc9, 0x6a, 0xbd,
-0x89, 0x84, 0x8a, 0xff, 0x19, 0x0b, 0xeb, 0x7f,
-0xcf, 0x8c, 0x19, 0x4e, 0xfc, 0xa1, 0x20, 0xfe,
-0xe1, 0xcf, 0x7b, 0x0a, 0xe2, 0x1f, 0x7a, 0x10,
-0x46, 0xa7, 0xf6, 0x70, 0x09, 0xfc, 0xb3, 0x89,
-0xf3, 0x3f, 0x1d, 0xd4, 0x28, 0xf6, 0xdf, 0xa6,
-0x98, 0xb7, 0xf0, 0xbe, 0x82, 0xff, 0x99, 0x4f,
-0xd1, 0xce, 0xde, 0xcc, 0x74, 0x7c, 0x53, 0x29,
-0xfc, 0x13, 0x0b, 0x64, 0x7f, 0x3a, 0xf6, 0x27,
-0x2b, 0xe3, 0x1f, 0x91, 0x8f, 0x24, 0xfc, 0x43,
-0x0e, 0xc2, 0x60, 0x69, 0x0e, 0x02, 0x83, 0x90,
-0xfe, 0xaf, 0x11, 0x04, 0xf0, 0xcf, 0x32, 0x91,
-0x7f, 0xd3, 0x45, 0xfe, 0xff, 0x7b, 0xbb, 0x9f,
-0xff, 0x31, 0xa8, 0x70, 0x25, 0x16, 0x86, 0x7f,
-0x1a, 0x6b, 0x65, 0xfe, 0x27, 0x67, 0xd4, 0x7a,
-0x30, 0xa0, 0x52, 0x8d, 0x7f, 0x60, 0xfd, 0xeb,
-0x30, 0x36, 0x78, 0xfe, 0x95, 0xe6, 0x3f, 0xcf,
-0x67, 0xeb, 0x77, 0xfa, 0xf4, 0x3c, 0xb9, 0xe4,
-0xec, 0x3d, 0x0a, 0x3c, 0x13, 0x57, 0xf6, 0x7f,
-0x61, 0x63, 0x23, 0xf6, 0x4f, 0xf0, 0xfc, 0x8b,
-0x33, 0xe0, 0xfc, 0x0b, 0xd0, 0xed, 0x8e, 0xdd,
-0xfe, 0x87, 0x9e, 0x10, 0xda, 0x8f, 0x7f, 0xd8,
-0xff, 0x6f, 0xa7, 0x84, 0x7f, 0x50, 0xa6, 0xd3,
-0x58, 0xd4, 0x1b, 0xc4, 0x3f, 0x6f, 0x73, 0x7e,
-0xbb, 0x1e, 0xf9, 0xfd, 0xb9, 0xd3, 0x9d, 0xa7,
-0xbd, 0x36, 0x04, 0xff, 0xc8, 0xfd, 0x5f, 0x5b,
-0xac, 0x06, 0x25, 0xfe, 0x89, 0xb1, 0xf5, 0x13,
-0xa2, 0xfe, 0xb5, 0x91, 0x8c, 0x81, 0xb2, 0xde,
-0x1a, 0x54, 0xf4, 0xbf, 0x5f, 0x06, 0xf7, 0x8f,
-0xc4, 0xff, 0xb4, 0xc6, 0x36, 0xf4, 0x45, 0xe7,
-0x7f, 0x3e, 0x83, 0xb0, 0x27, 0xa9, 0xc4, 0x3f,
-0x80, 0xff, 0x71, 0x0d, 0x3e, 0x8f, 0x57, 0x7a,
-0x1f, 0x17, 0xe7, 0x5f, 0x2c, 0x04, 0xf8, 0xc7,
-0x9b, 0xf6, 0xf3, 0x0e, 0xed, 0xff, 0xaa, 0x04,
-0xcf, 0xef, 0x84, 0x38, 0xff, 0x02, 0xd6, 0xbf,
-0x5e, 0xf6, 0xda, 0xbe, 0xc4, 0xf9, 0x17, 0x2f,
-0x07, 0xf0, 0x0f, 0x8e, 0xff, 0x3f, 0x11, 0xef,
-0xfb, 0x38, 0xfb, 0x1c, 0x8a, 0x07, 0xe7, 0xfb,
-0xc1, 0xfa, 0xd7, 0xa8, 0x94, 0xad, 0x26, 0xde,
-0xba, 0xb2, 0x2d, 0x98, 0xbf, 0x4e, 0x09, 0xfc,
-0x63, 0xc2, 0xf8, 0xa3, 0x53, 0xa3, 0xd6, 0x13,
-0x22, 0x8a, 0xeb, 0xff, 0x98, 0xaf, 0xf7, 0xeb,
-0x7f, 0xc6, 0xab, 0x7a, 0x5e, 0x0b, 0xc6, 0xab,
-0xd7, 0x6c, 0xb6, 0x3e, 0x55, 0x2b, 0x55, 0x37,
-0xb2, 0x84, 0x08, 0xba, 0xb7, 0x04, 0xfe, 0xf1,
-0xe9, 0x7f, 0x68, 0x74, 0x0d, 0xe6, 0xf7, 0x89,
-0x12, 0xfc, 0xcf, 0x50, 0x7c, 0x9f, 0xff, 0x93,
-0x7b, 0x04, 0xfe, 0x59, 0x6e, 0xfa, 0xb2, 0x5b,
-0x62, 0x76, 0x5b, 0x9b, 0x15, 0xe8, 0x7f, 0x97,
-0xce, 0xbf, 0x80, 0xf9, 0xeb, 0x58, 0xe5, 0x90,
-0x57, 0x7f, 0x49, 0xaa, 0xf1, 0x8f, 0x2f, 0xdf,
-0x91, 0x44, 0xa6, 0xea, 0x7f, 0xe7, 0xf8, 0xa7,
-0x36, 0x90, 0xfd, 0x2b, 0x06, 0x02, 0x78, 0x3b,
-0x84, 0xff, 0x21, 0x6c, 0x98, 0x37, 0xf6, 0x47,
-0x9e, 0xff, 0x5c, 0xac, 0xe0, 0xfc, 0x8f, 0x0f,
-0xff, 0xb8, 0x85, 0xbf, 0x40, 0x7e, 0xff, 0x7e,
-0x0f, 0xff, 0x07, 0xb4, 0x3e, 0xb4, 0x0b, 0x35,
-0x92, 0xf0, 0x17, 0x6e, 0x20, 0xf8, 0xa7, 0x23,
-0x7c, 0x75, 0x16, 0x32, 0x4b, 0x19, 0xf0, 0xaf,
-0x0f, 0x2d, 0x47, 0x86, 0xa5, 0x99, 0xa5, 0x8c,
-0x6f, 0xf2, 0xfb, 0xe4, 0x58, 0x33, 0x83, 0x9d,
-0x6f, 0x16, 0x62, 0x80, 0xbf, 0xd2, 0x0b, 0x5d,
-0xe3, 0x9b, 0xfc, 0xfe, 0xf5, 0xfe, 0x7d, 0xcb,
-0xfc, 0x6f, 0x92, 0xb3, 0xfc, 0x4e, 0xa0, 0xbf,
-0x44, 0x4b, 0x9d, 0x12, 0x86, 0xfe, 0x7b, 0xff,
-0xfe, 0xff, 0xb2, 0xff, 0x75, 0xd3, 0x8e, 0xe0,
-0xf3, 0x18, 0x8f, 0x3f, 0xd7, 0xfb, 0xd7, 0xda,
-0x1a, 0x65, 0x55, 0x32, 0xf9, 0x7b, 0xfe, 0xfc,
-0xff, 0xc1, 0x5f, 0xfb, 0xb5, 0x6b, 0xd7, 0x9c,
-0x32, 0xc6, 0xff, 0xe7, 0xf5, 0xdf, 0xb2, 0xe7,
-0xf1, 0xbb, 0x78, 0xf8, 0x5d, 0x3c, 0xfc, 0x06,
-0xfe, 0xff, 0x2e, 0x1e, 0x96, 0xfb, 0xfb, 0xb6,
-0xc5, 0x9f, 0x6f, 0xd7, 0x7a, 0xc8, 0x8f, 0xc5,
-0xae, 0xd9, 0x2d, 0xbb, 0x12, 0x17, 0x5d, 0xe1,
-0x74, 0x84, 0xfa, 0xe0, 0x82, 0xa3, 0xf6, 0xee,
-0x62, 0xf5, 0x90, 0x76, 0xb5, 0x14, 0x3f, 0x86,
-0x06, 0x12, 0x07, 0x62, 0x19, 0xd6, 0x76, 0x9a,
-0xf6, 0xf4, 0x60, 0xb1, 0x50, 0x7e, 0xac, 0x4e,
-0x62, 0x23, 0xd3, 0xce, 0x02, 0x05, 0x3f, 0x09,
-0xf4, 0x51, 0xb1, 0x5a, 0xf0, 0x76, 0x70, 0x20,
-0xd6, 0xf4, 0x8e, 0xb2, 0x7e, 0xb7, 0x35, 0x96,
-0xf2, 0xd6, 0xef, 0x42, 0x90, 0xff, 0xa9, 0x6c,
-0xcf, 0x7b, 0xb0, 0xf9, 0xf1, 0x32, 0xfc, 0x58,
-0x0d, 0x7d, 0x0d, 0x89, 0xb5, 0x4d, 0x56, 0xe3,
-0x9f, 0x75, 0xfc, 0xbf, 0x7f, 0x4e, 0x5d, 0x1f,
-0x3c, 0x6a, 0x65, 0x7b, 0xb1, 0x31, 0x17, 0x4d,
-0x1f, 0x4e, 0x8c, 0x6e, 0x84, 0x8d, 0x37, 0x4b,
-0xd5, 0x07, 0xa5, 0xfe, 0x38, 0xfb, 0x47, 0x96,
-0xb2, 0x5e, 0x26, 0xd5, 0x07, 0xd9, 0x7c, 0xa4,
-0x01, 0xc2, 0x86, 0x4d, 0x56, 0xc3, 0xfa, 0xa0,
-0x7e, 0x20, 0xd6, 0xea, 0x6c, 0x68, 0x5a, 0x0c,
-0xf8, 0x31, 0x5f, 0x7f, 0x1c, 0xd5, 0x87, 0x07,
-0xe6, 0xc9, 0x0b, 0x7e, 0x8c, 0xf0, 0xdb, 0x1f,
-0xa0, 0x35, 0x4e, 0xb5, 0xeb, 0x8d, 0xdb, 0x89,
-0x3e, 0xff, 0x77, 0x29, 0x3f, 0x7f, 0x08, 0xf8,
-0x31, 0xe9, 0xfd, 0x14, 0xdd, 0x86, 0xdf, 0x77,
-0xb4, 0x13, 0x76, 0xf8, 0xf9, 0x68, 0x48, 0xe6,
-0xc7, 0x56, 0x2c, 0xa7, 0xfa, 0x70, 0x3f, 0x1f,
-0x08, 0xeb, 0x83, 0xd2, 0xfb, 0x69, 0x43, 0x02,
-0xb6, 0xa5, 0x84, 0xf0, 0x63, 0xef, 0xa3, 0x35,
-0x76, 0xb5, 0xcb, 0x86, 0xdd, 0x55, 0x18, 0x28,
-0xd0, 0xf9, 0xd8, 0x84, 0x16, 0x8b, 0xa9, 0xf8,
-0x31, 0xa9, 0x3f, 0xce, 0x0a, 0xab, 0x0f, 0x02,
-0x7e, 0x03, 0xb0, 0x25, 0x77, 0x14, 0xbc, 0xfe,
-0xf1, 0xed, 0x01, 0x7d, 0x14, 0x5b, 0xcf, 0xe7,
-0x43, 0x0e, 0x6a, 0x53, 0xfa, 0x70, 0x7f, 0x7a,
-0x23, 0x65, 0xb7, 0x5e, 0x2c, 0x3b, 0x1f, 0x12,
-0xcc, 0x07, 0x48, 0x4f, 0xd9, 0xfe, 0xf5, 0x82,
-0x1f, 0x23, 0xe9, 0x54, 0x3e, 0x0d, 0xb6, 0x36,
-0x3d, 0x8e, 0x9f, 0x0a, 0x5f, 0x7d, 0x90, 0xcf,
-0x27, 0xd9, 0x6c, 0xe4, 0xe1, 0xee, 0x9a, 0xc9,
-0x69, 0x20, 0x44, 0x86, 0x14, 0x3a, 0x1f, 0x12,
-0xea, 0xc3, 0xbf, 0x70, 0xe7, 0x5d, 0x07, 0xfb,
-0xe3, 0xce, 0x48, 0xf3, 0x91, 0xde, 0x13, 0xfa,
-0xf0, 0xbb, 0xac, 0xe4, 0xcf, 0xe2, 0xe7, 0x52,
-0xfe, 0xfe, 0xc1, 0x33, 0xd2, 0x7c, 0x6c, 0xc0,
-0x86, 0xa5, 0xed, 0xf5, 0x76, 0x7c, 0x97, 0xd6,
-0x1f, 0xca, 0x8f, 0x59, 0xf3, 0xc6, 0x7d, 0xfb,
-0x5d, 0xd4, 0x31, 0xce, 0xc6, 0x62, 0x83, 0xf3,
-0x61, 0x99, 0xff, 0x77, 0xca, 0xf3, 0x21, 0xe9,
-0xf9, 0x74, 0x7b, 0xd0, 0x82, 0xf0, 0xfa, 0x60,
-0x1d, 0xb8, 0xfe, 0x2f, 0xd0, 0x9d, 0x54, 0x0f,
-0xaf, 0xaf, 0xd3, 0xe4, 0x7e, 0x37, 0x50, 0x1f,
-0x8c, 0xed, 0x91, 0x4e, 0x8f, 0xfd, 0xb3, 0xa4,
-0x98, 0x8f, 0xcd, 0xd7, 0xcf, 0x07, 0xf5, 0x41,
-0xa9, 0x3f, 0x2e, 0x45, 0x8d, 0xe0, 0x7c, 0x4e,
-0xc8, 0x8f, 0xed, 0x05, 0xf5, 0xc1, 0x42, 0xd6,
-0x5e, 0x5f, 0xd0, 0xee, 0x4a, 0x85, 0xd7, 0x07,
-0x1b, 0xfb, 0xb8, 0x5e, 0x37, 0x41, 0xe6, 0xb3,
-0xe5, 0xb1, 0x91, 0xb4, 0x79, 0x47, 0x4f, 0x80,
-0x1f, 0x5b, 0x8e, 0x64, 0x99, 0x50, 0x2e, 0xfe,
-0x63, 0x85, 0x70, 0x48, 0xf0, 0x63, 0x8d, 0x62,
-0x3e, 0xd2, 0x0b, 0x3a, 0x19, 0x8b, 0x34, 0xff,
-0xe2, 0xb6, 0x1b, 0x02, 0xfa, 0x28, 0xc0, 0x8f,
-0x2d, 0x05, 0xf1, 0xfc, 0x32, 0xf1, 0xc6, 0xf0,
-0xfa, 0x52, 0xf5, 0x41, 0x0b, 0xd6, 0x77, 0xce,
-0xdb, 0xab, 0xf3, 0x03, 0x17, 0xef, 0x29, 0xc9,
-0x8f, 0x49, 0xf3, 0x91, 0x2c, 0x1a, 0x7f, 0x4c,
-0x7c, 0xd9, 0x77, 0xb8, 0x9f, 0x7c, 0xc5, 0xf4,
-0x51, 0xfc, 0x79, 0xb4, 0x25, 0x3d, 0xc3, 0xcd,
-0xe3, 0x0b, 0x7a, 0x14, 0xe7, 0x83, 0x8c, 0xf3,
-0xfa, 0x20, 0x99, 0x0f, 0xd9, 0xc2, 0xa2, 0xcd,
-0x6a, 0xb4, 0xb1, 0x07, 0xc7, 0x1f, 0x84, 0xfc,
-0xfe, 0x04, 0xf5, 0x41, 0x2f, 0x7f, 0x55, 0x91,
-0x63, 0xc8, 0x2e, 0xa3, 0x35, 0xf9, 0xea, 0xd9,
-0x2a, 0xc3, 0xbf, 0x5f, 0x0d, 0xce, 0x87, 0x14,
-0xfe, 0x21, 0x07, 0xcb, 0x76, 0x61, 0xe3, 0x53,
-0xb1, 0x9e, 0x29, 0x88, 0x02, 0xf5, 0xc1, 0x9a,
-0x59, 0x7a, 0x1e, 0x68, 0xcb, 0xbd, 0xd5, 0xee,
-0xa0, 0x6c, 0x39, 0x9e, 0x4f, 0x81, 0xfa, 0x20,
-0xc8, 0x5f, 0xc3, 0x76, 0xca, 0x32, 0x86, 0xb4,
-0x4f, 0x03, 0xe7, 0x73, 0x85, 0xf1, 0x63, 0x5b,
-0x1f, 0x71, 0x6e, 0x1c, 0xd2, 0x7e, 0x87, 0xfc,
-0xf5, 0x20, 0xc0, 0x8f, 0x41, 0x3d, 0xcc, 0x01,
-0xed, 0x11, 0x6b, 0x27, 0x19, 0x94, 0xed, 0x8b,
-0xcf, 0xb0, 0x3e, 0xe8, 0xd7, 0x87, 0x57, 0xf7,
-0xe0, 0xc7, 0xc4, 0x9f, 0x5f, 0x8a, 0x1c, 0x72,
-0x4b, 0xfd, 0x71, 0xf4, 0x7c, 0xc6, 0xd9, 0xe0,
-0xf9, 0x56, 0xf3, 0x45, 0x7d, 0x70, 0x0c, 0xde,
-0x3f, 0x5f, 0xd9, 0xed, 0x4e, 0xa6, 0x93, 0xd6,
-0x07, 0x6f, 0x7b, 0x5d, 0xc2, 0x3f, 0xfc, 0x3c,
-0x91, 0x31, 0x43, 0x56, 0x43, 0xf5, 0x54, 0xf7,
-0x57, 0x66, 0x0a, 0x47, 0xed, 0x15, 0xb3, 0x6a,
-0xfc, 0x33, 0x81, 0xa4, 0x7c, 0xd4, 0x78, 0x2f,
-0xa9, 0x0f, 0xe2, 0xe7, 0xab, 0x61, 0x32, 0x44,
-0x1f, 0xa5, 0xb3, 0xfa, 0x20, 0x39, 0x66, 0x4e,
-0xcb, 0x76, 0x78, 0xf5, 0xc1, 0x74, 0x48, 0x7d,
-0x70, 0xa1, 0xa4, 0xcf, 0x41, 0xad, 0xa6, 0x31,
-0x20, 0xc6, 0x86, 0x2b, 0xf4, 0x51, 0x85, 0x85,
-0xfc, 0xfc, 0x0b, 0x5a, 0x1f, 0x84, 0xf3, 0xa3,
-0xb4, 0x92, 0xf5, 0x41, 0x6d, 0x46, 0x27, 0xf3,
-0x19, 0xa8, 0xfe, 0xfc, 0x0d, 0xa3, 0xed, 0x15,
-0x08, 0xb4, 0xe4, 0xf9, 0x90, 0xa0, 0x5f, 0x20,
-0x3d, 0x61, 0x2c, 0xc0, 0xd7, 0xbf, 0xa2, 0x73,
-0xd5, 0xa9, 0x6a, 0xa5, 0x3e, 0xaa, 0x28, 0xdd,
-0x0f, 0xa8, 0xc1, 0xe9, 0x6c, 0xc4, 0xc6, 0x62,
-0x27, 0x83, 0x81, 0xe2, 0xa2, 0xae, 0x20, 0xfe,
-0x99, 0x35, 0x21, 0xfe, 0xe9, 0xdf, 0x95, 0x37,
-0xa6, 0x9f, 0x74, 0xeb, 0x65, 0x0b, 0x94, 0xf8,
-0x67, 0x53, 0xbd, 0xa7, 0x8f, 0x5a, 0x8d, 0x61,
-0xcf, 0x01, 0xb3, 0xc9, 0xca, 0x34, 0xe0, 0xcb,
-0x26, 0xfd, 0x71, 0x09, 0x01, 0x84, 0x34, 0x70,
-0x3e, 0x6c, 0xad, 0x8c, 0x7f, 0x2c, 0x7a, 0x90,
-0xee, 0x7f, 0xa3, 0xf6, 0x71, 0x09, 0xff, 0xcc,
-0x63, 0xfb, 0x35, 0x74, 0x89, 0x9d, 0x7e, 0xcc,
-0x62, 0x83, 0x92, 0x26, 0x13, 0x4a, 0xfc, 0x73,
-0xc2, 0xf0, 0xf5, 0xdb, 0x26, 0xac, 0x38, 0xf9,
-0x24, 0x73, 0xc2, 0xe8, 0xe9, 0x60, 0xf1, 0x24,
-0xbe, 0x1f, 0xd6, 0x07, 0x4d, 0x88, 0xee, 0x66,
-0xd7, 0x6d, 0x4e, 0x53, 0x63, 0xca, 0x50, 0xe2,
-0x9f, 0x2e, 0x5d, 0xee, 0x3e, 0x98, 0x6c, 0x6c,
-0xd5, 0xf6, 0xd1, 0x4f, 0x0c, 0x35, 0xfe, 0xd1,
-0x65, 0x7d, 0x78, 0xa1, 0xfa, 0x23, 0x6a, 0xb4,
-0xda, 0x99, 0x08, 0xfa, 0x28, 0x72, 0x50, 0xd1,
-0x56, 0x05, 0x10, 0x7a, 0x46, 0x5d, 0x1f, 0xfc,
-0x14, 0xb5, 0x6e, 0xca, 0xfc, 0x43, 0xdc, 0x1d,
-0x0b, 0x59, 0x13, 0xa9, 0x3e, 0x98, 0x33, 0x76,
-0x6a, 0x53, 0xc6, 0x76, 0x74, 0xe7, 0xfd, 0x86,
-0x84, 0x7f, 0xd8, 0x1f, 0xab, 0x0f, 0xba, 0xf3,
-0xb1, 0x2d, 0xbc, 0x9e, 0x0e, 0x8a, 0x5c, 0x4b,
-0x85, 0xcd, 0x0a, 0xfc, 0x93, 0x82, 0xf5, 0x41,
-0x32, 0x16, 0xc0, 0x20, 0x63, 0x01, 0xb6, 0x22,
-0x7a, 0x50, 0x91, 0xa2, 0x3e, 0xb8, 0xf9, 0x26,
-0xb6, 0x29, 0xaa, 0xbe, 0x5e, 0x46, 0xfb, 0xd3,
-0xe9, 0x7c, 0x00, 0xd8, 0xa8, 0x75, 0x66, 0xbe,
-0x52, 0x1f, 0x75, 0xc9, 0x1d, 0x44, 0x46, 0xc7,
-0x1e, 0xc2, 0x46, 0xb9, 0xc5, 0x50, 0x1f, 0x45,
-0x3e, 0x5c, 0xe3, 0x76, 0xd3, 0xe3, 0xf8, 0xfc,
-0x48, 0x82, 0x08, 0xcb, 0xdf, 0x44, 0xed, 0xf7,
-0x25, 0x94, 0xf8, 0xa7, 0x1e, 0x81, 0xfe, 0xb8,
-0x8b, 0x68, 0x8d, 0x99, 0x29, 0x68, 0x45, 0x32,
-0x16, 0xd2, 0x34, 0xd4, 0xf5, 0x41, 0x24, 0xd5,
-0x07, 0x53, 0x79, 0x7c, 0x1b, 0x8c, 0xd3, 0xb1,
-0x90, 0x86, 0x1a, 0xff, 0xd4, 0x8a, 0xfe, 0x38,
-0x0c, 0x3b, 0x2b, 0xf2, 0xd8, 0x9f, 0xe3, 0xda,
-0x76, 0x24, 0x0b, 0xd5, 0x64, 0x7d, 0xd4, 0x08,
-0xbd, 0x48, 0xfa, 0x6d, 0xb3, 0xd5, 0xba, 0xd3,
-0xfb, 0xff, 0xcd, 0x28, 0xf1, 0xcf, 0x84, 0xbf,
-0x5e, 0x5c, 0xf3, 0x8f, 0x9e, 0x11, 0x5e, 0x1f,
-0x9c, 0x66, 0xf8, 0x67, 0x1a, 0xe3, 0x9f, 0x95,
-0xb4, 0x3e, 0x68, 0xb4, 0x19, 0x19, 0x25, 0xfe,
-0x91, 0xf4, 0x51, 0x87, 0x9c, 0x55, 0xcf, 0x19,
-0x64, 0x3e, 0xe4, 0x68, 0x6a, 0xd5, 0xa0, 0xa1,
-0xd6, 0x47, 0xe9, 0x72, 0xf5, 0xbc, 0x68, 0x34,
-0x3d, 0x89, 0x0d, 0x87, 0x18, 0xde, 0x8b, 0xc3,
-0xfa, 0xa6, 0xb4, 0xc0, 0x3f, 0xc8, 0x04, 0xd5,
-0xb1, 0x83, 0xd6, 0xca, 0x31, 0x23, 0x97, 0x3a,
-0x6d, 0x1f, 0x44, 0x2b, 0x7b, 0x81, 0x50, 0x6a,
-0x91, 0xc0, 0x3f, 0xc6, 0xce, 0x87, 0x05, 0xda,
-0xf9, 0x2f, 0x57, 0x16, 0xf5, 0x1b, 0xe7, 0x82,
-0xdd, 0x5a, 0x4c, 0xa8, 0xf1, 0x4f, 0xdd, 0x3e,
-0x31, 0x5d, 0xf6, 0x22, 0x89, 0x4e, 0x83, 0xd4,
-0x58, 0x63, 0x87, 0xe8, 0xa3, 0xfa, 0x46, 0x4d,
-0x6f, 0x9a, 0x0d, 0xed, 0x6f, 0x2a, 0x24, 0x26,
-0x68, 0xda, 0x6a, 0x29, 0xe8, 0x6e, 0xfe, 0xba,
-0x8b, 0xe2, 0x1f, 0x51, 0x8f, 0xf3, 0xc5, 0x1f,
-0xbb, 0x3a, 0x47, 0x81, 0xcd, 0x0f, 0x4c, 0x03,
-0x54, 0x0c, 0x85, 0x3e, 0xca, 0x5f, 0x1f, 0x1c,
-0x34, 0xf2, 0x9a, 0x3b, 0xd8, 0x7f, 0x81, 0xb2,
-0x3e, 0x68, 0xf9, 0xe2, 0x8f, 0xdd, 0x48, 0x07,
-0xb5, 0xa1, 0x46, 0xf4, 0x83, 0x10, 0x7d, 0x14,
-0x17, 0x75, 0xd3, 0xfc, 0xe5, 0x18, 0x36, 0x0e,
-0xb3, 0x97, 0xf1, 0x8d, 0xe4, 0xbd, 0x51, 0x52,
-0xe9, 0xc5, 0x84, 0xe8, 0x47, 0x58, 0x08, 0xfb,
-0x07, 0xc9, 0xc1, 0x9d, 0x7d, 0x54, 0x28, 0x85,
-0xe3, 0xc9, 0x50, 0x4c, 0xd4, 0x07, 0xf9, 0xfd,
-0xbf, 0x9c, 0xe2, 0x1f, 0x6f, 0x3e, 0x00, 0x99,
-0x97, 0x98, 0x20, 0xf9, 0xee, 0xa4, 0xdd, 0x96,
-0x8f, 0x50, 0x1f, 0x24, 0xe7, 0xb9, 0x37, 0x3e,
-0x85, 0x8d, 0x5f, 0xe4, 0xb3, 0x79, 0x50, 0x1f,
-0x5c, 0x04, 0xf1, 0x4f, 0xb7, 0x09, 0xdf, 0xee,
-0x0b, 0xf7, 0xf5, 0x6b, 0x03, 0xa8, 0x3f, 0x95,
-0xed, 0x8f, 0xa4, 0x8f, 0xca, 0xa6, 0xfa, 0x51,
-0xc5, 0x09, 0xf2, 0xfe, 0x85, 0xfe, 0x54, 0x5d,
-0x1f, 0x84, 0xfa, 0x28, 0x52, 0x1f, 0xac, 0x20,
-0xfe, 0x99, 0x08, 0xaf, 0x0f, 0xfe, 0x5c, 0xaa,
-0x06, 0xde, 0xed, 0x54, 0x93, 0xfd, 0x9e, 0xf7,
-0x09, 0xa5, 0x44, 0x7d, 0xd0, 0x79, 0x42, 0xd6,
-0x47, 0xa5, 0xca, 0xcc, 0x87, 0x1c, 0x93, 0xf5,
-0x51, 0xd9, 0x14, 0x19, 0xe4, 0x18, 0xe4, 0x7f,
-0xf8, 0x7c, 0xda, 0xe3, 0x68, 0xc0, 0x84, 0xf7,
-0x03, 0x52, 0xea, 0x75, 0x05, 0xfe, 0x29, 0x72,
-0xfc, 0xe3, 0x7a, 0x0f, 0xa9, 0xe7, 0x43, 0xf2,
-0xfc, 0xb8, 0xd6, 0xa7, 0x8f, 0xba, 0x41, 0xa9,
-0x97, 0x0b, 0x9f, 0x8f, 0x6d, 0xab, 0xf5, 0x63,
-0xa1, 0xf3, 0x91, 0x72, 0xca, 0xdf, 0x0f, 0xc3,
-0x3f, 0x66, 0xc8, 0x7c, 0x48, 0x81, 0x7f, 0x26,
-0xa4, 0xf8, 0x63, 0xca, 0x6e, 0x01, 0xfd, 0x71,
-0xec, 0x7e, 0x9b, 0x95, 0xf4, 0x51, 0x4f, 0xc8,
-0x34, 0x88, 0xc0, 0x3f, 0x7c, 0x3e, 0x76, 0xa7,
-0xd1, 0x65, 0x09, 0x35, 0x78, 0xaa, 0xd5, 0x56,
-0xce, 0x87, 0x7c, 0x5f, 0xcc, 0xc7, 0xae, 0xfb,
-0xa5, 0x59, 0xde, 0x3f, 0x62, 0x3e, 0x76, 0x23,
-0xc4, 0x3f, 0x5f, 0xda, 0x4d, 0x84, 0xff, 0x39,
-0x13, 0xc0, 0xe7, 0x80, 0xff, 0xa9, 0x0f, 0xf2,
-0x3f, 0x73, 0xe8, 0x3f, 0xfc, 0xfc, 0x8f, 0xd0,
-0x3f, 0xf8, 0xf8, 0x9f, 0x7c, 0x19, 0xfe, 0x67,
-0x93, 0x1c, 0x7f, 0x1a, 0x66, 0x29, 0xff, 0xe3,
-0x9f, 0xb7, 0x20, 0xfa, 0xd7, 0xa6, 0xeb, 0x24,
-0x35, 0x78, 0xcb, 0x9e, 0x84, 0xe0, 0x7f, 0x60,
-0x7f, 0x1c, 0xbb, 0xfe, 0xce, 0x98, 0x8c, 0x7f,
-0xf4, 0x10, 0x7d, 0x38, 0xbb, 0x7e, 0xbf, 0x3e,
-0x5c, 0xad, 0x7f, 0x0e, 0xc3, 0x3f, 0x76, 0x56,
-0xad, 0x4f, 0x16, 0xfc, 0x4f, 0x40, 0x1f, 0xa5,
-0x34, 0x4e, 0xaa, 0xf1, 0xcf, 0xb0, 0x2d, 0x8f,
-0x45, 0xe2, 0x78, 0x40, 0xcc, 0xc7, 0xde, 0xec,
-0x9f, 0x0f, 0x10, 0xb5, 0x3f, 0x8e, 0xd0, 0x20,
-0xb4, 0x3f, 0x4e, 0xb1, 0xdf, 0x15, 0xca, 0xf9,
-0xd8, 0x04, 0xff, 0x78, 0x86, 0x9f, 0xff, 0x01,
-0xfd, 0x71, 0xf5, 0x41, 0x35, 0x78, 0x91, 0xcd,
-0x47, 0x12, 0xf3, 0x01, 0x2a, 0x42, 0xf0, 0x8f,
-0x6b, 0x14, 0x4a, 0xf0, 0x3f, 0xfa, 0x1e, 0xbf,
-0xf7, 0xd2, 0xe3, 0x81, 0xf9, 0x48, 0xd2, 0x7c,
-0x6c, 0x43, 0xe8, 0xc3, 0xf9, 0xf5, 0xfb, 0xf9,
-0x1f, 0xbe, 0x5f, 0xa2, 0x8f, 0x1a, 0x41, 0x21,
-0xb7, 0x01, 0xe7, 0x7f, 0xce, 0x82, 0xfb, 0x07,
-0xf0, 0x3f, 0xd3, 0x7c, 0x50, 0xa4, 0xcf, 0xff,
-0x21, 0xf3, 0xb1, 0x47, 0x7d, 0xb4, 0x0f, 0x33,
-0xee, 0x07, 0xfd, 0x71, 0x22, 0xfe, 0x0c, 0xa0,
-0x5d, 0x34, 0xfe, 0x54, 0xb8, 0x13, 0x5d, 0x3c,
-0xbd, 0x4a, 0xb7, 0x23, 0xe9, 0xc3, 0x6d, 0x88,
-0x7f, 0x5e, 0xa2, 0x46, 0xfa, 0xb4, 0xfd, 0xf7,
-0xbe, 0xe7, 0x57, 0xf4, 0x43, 0xf5, 0xf7, 0x3f,
-0xcc, 0xf9, 0x1f, 0xf4, 0x09, 0x1b, 0x94, 0xed,
-0xe7, 0x7f, 0xc0, 0x7c, 0xec, 0x3a, 0x39, 0xbf,
-0x93, 0x6c, 0x0e, 0xe2, 0xed, 0x07, 0xac, 0xdf,
-0x84, 0xc7, 0x07, 0xa8, 0x0f, 0xbf, 0x32, 0xd8,
-0x5e, 0xac, 0xb9, 0x18, 0xbf, 0x06, 0xf3, 0xd7,
-0xaa, 0xa9, 0xe4, 0x25, 0x38, 0x1f, 0xdb, 0x00,
-0xfc, 0xcf, 0x21, 0xb4, 0xf2, 0x35, 0x02, 0x7b,
-0x82, 0xe7, 0x83, 0x88, 0xf9, 0xd8, 0x82, 0xff,
-0x79, 0x1e, 0xc3, 0xa4, 0x3f, 0x97, 0x64, 0x60,
-0xae, 0xb1, 0xbe, 0x27, 0x0d, 0xe7, 0x03, 0x80,
-0xf8, 0x33, 0xec, 0x7b, 0xed, 0x02, 0xfd, 0x71,
-0xfc, 0x7a, 0x44, 0xfe, 0xda, 0x47, 0xf6, 0x5b,
-0xac, 0x01, 0x63, 0x91, 0x54, 0xf3, 0x01, 0x62,
-0x92, 0x7e, 0x3e, 0xa4, 0x5f, 0xac, 0xe8, 0xc3,
-0x3f, 0x5e, 0xf4, 0x9e, 0x0b, 0x9b, 0x0f, 0x29,
-0xe6, 0x63, 0xef, 0x42, 0x0c, 0xff, 0xe0, 0xeb,
-0x19, 0xb2, 0x6e, 0x55, 0xe7, 0xaf, 0x90, 0xf9,
-0xd8, 0x23, 0x46, 0xd9, 0xf9, 0x90, 0x95, 0x3a,
-0xe8, 0x8f, 0xdb, 0xef, 0xa3, 0xc5, 0x04, 0xfe,
-0x11, 0xf3, 0xb1, 0x6f, 0xea, 0x86, 0xfb, 0xa5,
-0xf3, 0x21, 0x83, 0xfe, 0x71, 0x56, 0x70, 0xfc,
-0xf3, 0xcf, 0x7c, 0x53, 0xe4, 0x7c, 0xd8, 0xbb,
-0x95, 0xfb, 0xfd, 0x63, 0xf1, 0x3c, 0xfe, 0x0f,
-0x7b, 0xd7, 0x1e, 0x1c, 0xc5, 0x71, 0xe6, 0x7b,
-0x1e, 0x2b, 0x8d, 0xb4, 0x2b, 0x34, 0x7a, 0x2c,
-0xac, 0x1d, 0x20, 0xa3, 0x07, 0xa0, 0x73, 0x84,
-0x58, 0x0b, 0xbf, 0x72, 0x70, 0x30, 0x5a, 0x01,
-0x11, 0x8f, 0x98, 0x8d, 0xc1, 0xa0, 0xa4, 0x54,
-0x57, 0x63, 0x17, 0x55, 0xf1, 0x1f, 0x9c, 0x4b,
-0x38, 0x57, 0x17, 0xe7, 0x1e, 0x76, 0xaf, 0x1e,
-0x80, 0x2d, 0xe7, 0xbc, 0xc1, 0x9c, 0xad, 0x3b,
-0x53, 0x75, 0x22, 0x21, 0x39, 0xd7, 0x95, 0xcf,
-0x07, 0xc4, 0x0f, 0xce, 0x76, 0xd9, 0x23, 0x59,
-0x38, 0x32, 0xa7, 0xc3, 0x9c, 0x8f, 0x72, 0x11,
-0x9b, 0x32, 0xb2, 0x8b, 0x4a, 0x54, 0x65, 0xfb,
-0xac, 0xe3, 0xc8, 0x19, 0x12, 0x1b, 0xae, 0x7b,
-0x5e, 0xdd, 0x33, 0xd3, 0xbd, 0x3b, 0x6b, 0xec,
-0x4b, 0x72, 0xf6, 0xfe, 0xf5, 0x63, 0xb6, 0x19,
-0x75, 0x7f, 0xdb, 0xf3, 0xf5, 0x6f, 0xbe, 0xa7,
-0x59, 0x15, 0x66, 0x3b, 0x05, 0xf3, 0xe3, 0xc0,
-0x13, 0x72, 0x90, 0xed, 0x14, 0xac, 0x8f, 0x24,
-0x4f, 0x86, 0xac, 0x7f, 0x36, 0x78, 0xd4, 0xc7,
-0xf7, 0x98, 0xf9, 0x71, 0x5c, 0xe0, 0xeb, 0x8f,
-0xa6, 0x04, 0xa4, 0xd1, 0xe4, 0x02, 0x52, 0x38,
-0xcb, 0xf4, 0xd5, 0x07, 0x78, 0xd1, 0x2f, 0x0d,
-0x31, 0xbc, 0x1f, 0x0a, 0xd7, 0x87, 0x0c, 0x83,
-0x42, 0xf5, 0x21, 0x83, 0x60, 0xb4, 0x50, 0x7d,
-0x48, 0x47, 0x50, 0xc4, 0x22, 0xed, 0xf2, 0x1f,
-0xf7, 0xf7, 0x0d, 0xf8, 0xbf, 0x58, 0xe0, 0x4b,
-0x9c, 0xfe, 0xb0, 0x7e, 0xda, 0x33, 0xce, 0xa9,
-0x0f, 0x99, 0x7c, 0x3e, 0x24, 0x0d, 0xaa, 0xc2,
-0x7c, 0xe1, 0xfa, 0x48, 0xb8, 0x2c, 0xc3, 0x2e,
-0x96, 0x7c, 0xb8, 0xfd, 0xd1, 0x22, 0xd6, 0xc7,
-0xa6, 0x56, 0xb7, 0xde, 0xb2, 0xff, 0x44, 0xa8,
-0x0f, 0xc9, 0x78, 0xac, 0x8a, 0xd7, 0x07, 0xe0,
-0x00, 0x5e, 0x7d, 0x48, 0x1e, 0x28, 0x54, 0x1f,
-0x80, 0xcd, 0x7f, 0xdc, 0xf1, 0xe1, 0xfa, 0x00,
-0xa5, 0xd5, 0x47, 0x2a, 0xad, 0x3e, 0x76, 0x84,
-0xfa, 0x00, 0x91, 0xf8, 0x0f, 0xc7, 0xff, 0xc5,
-0x03, 0x9d, 0xdc, 0xfa, 0x90, 0x14, 0xa0, 0xeb,
-0x2b, 0xf2, 0xfa, 0xa3, 0xf1, 0x00, 0xab, 0x3e,
-0x92, 0xb3, 0xba, 0x47, 0xd9, 0xeb, 0xf5, 0xe6,
-0x13, 0xea, 0x8f, 0x16, 0x00, 0xb3, 0x02, 0xf5,
-0x91, 0x82, 0xfd, 0xd1, 0x82, 0xf3, 0x9f, 0x6f,
-0xf3, 0x1f, 0x77, 0x7f, 0xfa, 0xfb, 0xa3, 0xf1,
-0x00, 0xb1, 0x3f, 0x14, 0xad, 0x0f, 0x70, 0x03,
-0xa7, 0x3f, 0x1a, 0x2b, 0x2d, 0x8e, 0xaa, 0x0f,
-0xe0, 0x7e, 0xc2, 0xf5, 0x01, 0x02, 0xc0, 0xaa,
-0x57, 0x43, 0xea, 0x63, 0x6b, 0x42, 0xd8, 0xdb,
-0x15, 0x06, 0x94, 0xff, 0x4b, 0x99, 0x5f, 0xc1,
-0x2d, 0x0b, 0x80, 0xc1, 0xf5, 0x08, 0x34, 0x1d,
-0xe3, 0xd5, 0x07, 0xb8, 0x87, 0xad, 0x6f, 0x29,
-0xff, 0x57, 0x32, 0xca, 0xf9, 0x75, 0x82, 0xd4,
-0x47, 0xba, 0x8a, 0xd2, 0x3f, 0xbf, 0xa4, 0x0a,
-0xd5, 0x8e, 0xf3, 0xeb, 0x63, 0x17, 0x5f, 0x2f,
-0xe5, 0xff, 0x92, 0x29, 0xe9, 0x05, 0xdd, 0xee,
-0x93, 0x4e, 0x04, 0x3e, 0x65, 0x7f, 0x6e, 0x09,
-0xd5, 0x87, 0x0c, 0x82, 0xd1, 0x8d, 0x07, 0xeb,
-0x8e, 0xb1, 0xeb, 0x23, 0xf9, 0xf2, 0xe5, 0x37,
-0x52, 0xff, 0x91, 0xd1, 0x1f, 0x2d, 0x44, 0x03,
-0xbe, 0x4c, 0xae, 0xd4, 0x11, 0xfb, 0x0f, 0xae,
-0x0f, 0xb0, 0x8c, 0x79, 0x7e, 0x49, 0x1c, 0xff,
-0xd7, 0x76, 0xf0, 0x68, 0xa1, 0xf3, 0x6e, 0x56,
-0xc0, 0xfe, 0x03, 0xc2, 0xd9, 0x61, 0x0c, 0xfe,
-0x43, 0xec, 0x3f, 0x4a, 0x38, 0x5a, 0xfe, 0xbd,
-0x70, 0x7c, 0xb8, 0xe8, 0xf1, 0x9f, 0x79, 0xbc,
-0xf5, 0x7a, 0xe0, 0xc1, 0x19, 0x69, 0xba, 0x9c,
-0x97, 0x1f, 0x17, 0xb9, 0x3f, 0x48, 0x54, 0xfe,
-0xc3, 0xa8, 0x8f, 0xcd, 0x5a, 0xef, 0x15, 0xf0,
-0x9f, 0x08, 0xfc, 0x64, 0x82, 0x57, 0x1f, 0x9b,
-0x03, 0x3e, 0x4b, 0xfe, 0x53, 0xa0, 0x3e, 0x24,
-0x17, 0xcc, 0x94, 0xc2, 0x7f, 0xf8, 0xf5, 0x21,
-0xb9, 0xe0, 0x8d, 0x02, 0xf5, 0xb1, 0x99, 0xf6,
-0x1f, 0x9a, 0xff, 0x84, 0xba, 0xf5, 0x7d, 0x9a,
-0xfc, 0x67, 0x14, 0x44, 0x59, 0x2f, 0xc5, 0x7f,
-0xf6, 0x7e, 0xbe, 0xf9, 0x0f, 0xa7, 0x9f, 0xc5,
-0x27, 0xe6, 0x3f, 0x47, 0xfc, 0xfc, 0x67, 0xfe,
-0xa7, 0xc2, 0x7f, 0xa8, 0xfa, 0x48, 0xc3, 0x5c,
-0xfe, 0x53, 0xfd, 0xa9, 0xf0, 0x1f, 0x10, 0xe4,
-0x3f, 0xc5, 0xfa, 0x83, 0xd4, 0x14, 0xe1, 0x3f,
-0xc1, 0xfe, 0xb0, 0xc9, 0x28, 0xf3, 0xa7, 0xf8,
-0x8f, 0xf0, 0x29, 0xf3, 0x9f, 0xc8, 0xf9, 0x71,
-0x9f, 0x90, 0xff, 0xb4, 0xfa, 0xed, 0x3f, 0xfb,
-0x69, 0xfe, 0x13, 0x0c, 0xdb, 0x63, 0xf0, 0x1f,
-0x5f, 0x7d, 0x48, 0x2e, 0xe0, 0xf2, 0x1f, 0x0e,
-0x20, 0xfc, 0xc7, 0xa4, 0xfa, 0xa3, 0x45, 0xe2,
-0x3f, 0x91, 0xf4, 0x0f, 0xe1, 0x3f, 0xaa, 0xdb,
-0x1f, 0xb6, 0x30, 0xff, 0xf1, 0x7e, 0x2f, 0x23,
-0xd2, 0xfb, 0x17, 0xe1, 0x3f, 0x46, 0x98, 0xff,
-0x88, 0xe1, 0xf5, 0x1e, 0xf7, 0xe6, 0x33, 0xc0,
-0xc8, 0x8f, 0xa3, 0x81, 0x1c, 0xb0, 0xff, 0x98,
-0x5c, 0xfe, 0xe3, 0xf3, 0x7f, 0x6d, 0xa3, 0xf9,
-0x4f, 0xf1, 0xf3, 0xab, 0x40, 0x7e, 0x5c, 0x18,
-0xac, 0x3f, 0x58, 0xcb, 0x8b, 0xff, 0xe1, 0xf2,
-0x01, 0x6f, 0x7f, 0xc2, 0x2a, 0x1e, 0xff, 0x89,
-0x10, 0xff, 0xc3, 0x03, 0x75, 0xd3, 0x22, 0xc5,
-0x7f, 0x14, 0x7b, 0x93, 0x74, 0xd2, 0x81, 0x40,
-0xda, 0xd2, 0xf1, 0x04, 0x93, 0xff, 0x8c, 0x0d,
-0x33, 0x69, 0x8f, 0xd9, 0x74, 0x42, 0xe1, 0xf9,
-0xbf, 0x58, 0xcb, 0xd4, 0xb5, 0x6e, 0xda, 0x30,
-0xc8, 0x8a, 0xff, 0xf1, 0x8b, 0xf1, 0x87, 0x3a,
-0x5d, 0x68, 0x88, 0xef, 0xff, 0xb2, 0xc1, 0x7f,
-0x83, 0x5e, 0x9d, 0x2e, 0xa4, 0xf9, 0xef, 0x45,
-0xfb, 0xc3, 0xae, 0xf0, 0xfb, 0x07, 0x8b, 0xf2,
-0x9f, 0x76, 0x93, 0x8e, 0x6f, 0x99, 0x09, 0xf9,
-0xbf, 0x24, 0xdf, 0xfc, 0x5f, 0x1c, 0x69, 0x7f,
-0x9d, 0x9e, 0x3f, 0x5d, 0x1f, 0x89, 0xa9, 0x7f,
-0xa0, 0x36, 0x45, 0xcb, 0x87, 0xf4, 0x87, 0xbd,
-0x10, 0xa8, 0x0f, 0xe0, 0x82, 0xfd, 0x53, 0x74,
-0x3c, 0x8c, 0xcf, 0xff, 0xe5, 0x06, 0xf9, 0xf8,
-0x68, 0x4f, 0xda, 0x2e, 0x94, 0xed, 0xd9, 0x7f,
-0x28, 0xff, 0x17, 0x53, 0x3e, 0xcb, 0x7c, 0xfe,
-0x62, 0xe2, 0xff, 0x0a, 0xc4, 0xff, 0x38, 0xe0,
-0x43, 0xd0, 0xde, 0xed, 0xd3, 0x57, 0x5e, 0xfd,
-0xcf, 0xc9, 0x14, 0x53, 0xff, 0xc0, 0x86, 0x8c,
-0xdf, 0xff, 0xe5, 0xca, 0x33, 0x54, 0x1f, 0x80,
-0x34, 0x8a, 0x65, 0xfa, 0xbf, 0xb6, 0xcb, 0xcc,
-0xfd, 0x06, 0x1a, 0xcf, 0xfa, 0xf4, 0x0f, 0xcf,
-0xff, 0xe5, 0x80, 0x73, 0x80, 0x34, 0x8a, 0xcd,
-0x15, 0xf4, 0x7f, 0xb9, 0xe0, 0x85, 0x48, 0xfe,
-0x2f, 0x0f, 0xe4, 0xdb, 0x75, 0x2a, 0xbe, 0xa5,
-0xbc, 0x40, 0x7d, 0x00, 0x07, 0x88, 0x77, 0xb7,
-0x94, 0xe2, 0xff, 0xd2, 0x17, 0xfa, 0x0a, 0x65,
-0xf3, 0xfc, 0x5f, 0x04, 0x34, 0x3b, 0x85, 0xb2,
-0x25, 0xab, 0x94, 0x74, 0x71, 0xff, 0xd7, 0xd3,
-0x76, 0x20, 0x90, 0x13, 0x1a, 0xc4, 0xf6, 0x7f,
-0x51, 0x40, 0x5f, 0xe6, 0x2b, 0x94, 0x4d, 0xf9,
-0xbf, 0xa8, 0xf1, 0x2a, 0x71, 0x84, 0xc1, 0x95,
-0xbd, 0x74, 0xfc, 0x0f, 0xb3, 0x3e, 0xa4, 0xe1,
-0xa3, 0x3d, 0x5a, 0x4b, 0x74, 0xff, 0x17, 0x38,
-0x14, 0x28, 0x0c, 0xc5, 0x8c, 0xff, 0xf1, 0xff,
-0x10, 0xe3, 0x0a, 0xdb, 0xff, 0xc5, 0xe3, 0x6f,
-0x86, 0x2f, 0xfe, 0x87, 0xf8, 0xbf, 0x6a, 0xd8,
-0xfc, 0x67, 0xf9, 0xed, 0x4b, 0xa8, 0x2b, 0x4c,
-0xff, 0x57, 0x80, 0xf6, 0xd0, 0xf1, 0x3f, 0x2c,
-0xff, 0x17, 0xa0, 0x68, 0xcf, 0x0b, 0xea, 0x92,
-0x7c, 0x0b, 0xbb, 0x3e, 0xa4, 0xa7, 0x7f, 0x74,
-0x9f, 0x7e, 0x6e, 0x9d, 0xa1, 0xf5, 0x0f, 0xc7,
-0xff, 0x45, 0x80, 0xb2, 0x38, 0xdb, 0xc2, 0xf3,
-0x7f, 0x31, 0x69, 0xcf, 0xf2, 0xa9, 0x56, 0xae,
-0xff, 0xeb, 0x2f, 0x02, 0xa7, 0xb9, 0xa5, 0x46,
-0x74, 0x9f, 0x3e, 0x21, 0xef, 0xbf, 0x7b, 0x5f,
-0x08, 0x55, 0x33, 0xbe, 0x04, 0x2e, 0xc1, 0x9f,
-0x4e, 0xd1, 0xe7, 0x97, 0x49, 0xf8, 0xa7, 0x9d,
-0x7f, 0x31, 0xea, 0x9f, 0xff, 0xd3, 0xa0, 0x69,
-0x55, 0x8b, 0x8f, 0xff, 0xb8, 0xe3, 0xd9, 0xf6,
-0x9f, 0xa7, 0x41, 0x83, 0x4e, 0x17, 0x86, 0xa2,
-0xeb, 0x43, 0xb2, 0xf4, 0xcf, 0x61, 0x2f, 0xf1,
-0xc7, 0xbe, 0xf2, 0x0a, 0x55, 0x1f, 0x20, 0xe4,
-0xbf, 0x60, 0x9c, 0x2f, 0x1c, 0xff, 0x17, 0xed,
-0x28, 0xf4, 0x05, 0x66, 0x70, 0xfc, 0x5f, 0xa4,
-0x50, 0x92, 0x89, 0x0b, 0x05, 0x30, 0xfd, 0x5f,
-0x4c, 0xfe, 0xf3, 0x2f, 0x46, 0x5b, 0x96, 0x3e,
-0xbf, 0x38, 0xfe, 0x2f, 0x0f, 0xa0, 0x6d, 0x66,
-0xd2, 0xe3, 0xa9, 0xfa, 0xd8, 0xe1, 0xfa, 0x00,
-0x96, 0x7c, 0x5a, 0x75, 0xaa, 0x90, 0x78, 0x86,
-0xf2, 0x7f, 0xf1, 0xf8, 0x0f, 0xa0, 0xe5, 0x43,
-0xea, 0x43, 0xee, 0x0f, 0xd6, 0x07, 0xb0, 0x03,
-0xa1, 0x85, 0x60, 0x3d, 0x28, 0x86, 0xfd, 0xe7,
-0x9e, 0xdf, 0x47, 0xfb, 0x4f, 0xb0, 0x3e, 0x12,
-0x1b, 0x70, 0xfb, 0xa3, 0xfd, 0x5f, 0xd9, 0x7f,
-0xe4, 0x2b, 0xb3, 0xff, 0x14, 0xf7, 0x7f, 0x55,
-0x5d, 0x91, 0xfd, 0xa7, 0x50, 0x7f, 0xb4, 0xa2,
-0xf6, 0x9f, 0x08, 0xf2, 0xf9, 0x14, 0xfd, 0x5f,
-0xd1, 0xfa, 0xc3, 0x7e, 0x6e, 0xed, 0x3f, 0xbf,
-0x1d, 0xff, 0x57, 0xe1, 0xfe, 0x68, 0x85, 0xec,
-0x3f, 0x7c, 0xff, 0x17, 0x27, 0xfe, 0xe7, 0x4a,
-0xfd, 0x5f, 0xd1, 0xfa, 0xc3, 0x46, 0xb6, 0xff,
-0x90, 0xfa, 0x48, 0x62, 0x41, 0xfb, 0x8f, 0x67,
-0x7f, 0x88, 0x68, 0xff, 0x71, 0xef, 0x7f, 0x85,
-0xf5, 0xb1, 0xb9, 0xf6, 0x1f, 0xdd, 0x1b, 0x5f,
-0x9a, 0xfd, 0x27, 0xd8, 0x1f, 0x8d, 0x0d, 0x38,
-0xfd, 0x41, 0x4a, 0xaf, 0x8f, 0x5d, 0xd4, 0xfe,
-0x13, 0xee, 0x8f, 0x16, 0xb1, 0x3f, 0x6c, 0x44,
-0xfb, 0x0f, 0x9b, 0xff, 0x04, 0xe3, 0x9d, 0x0a,
-0xf5, 0x47, 0x63, 0x01, 0x56, 0x7f, 0x34, 0x91,
-0x0a, 0x84, 0x7e, 0x33, 0xa8, 0x3f, 0x0b, 0xf4,
-0x47, 0x23, 0xa0, 0x9c, 0xc1, 0x7f, 0x28, 0xff,
-0x57, 0x81, 0xc0, 0x06, 0x7e, 0x7f, 0xb4, 0x12,
-0xed, 0x3f, 0x9c, 0x78, 0x21, 0x7e, 0x7f, 0x34,
-0xdc, 0xbf, 0x32, 0x20, 0x1f, 0x89, 0x5b, 0x1f,
-0x29, 0xd8, 0x36, 0x97, 0xc1, 0x7f, 0x22, 0xd9,
-0x7f, 0xf8, 0xfd, 0x61, 0x09, 0xd8, 0x96, 0x38,
-0x4f, 0x0a, 0x45, 0x06, 0xf9, 0xcf, 0x2c, 0x1f,
-0xdb, 0xb9, 0x13, 0x3c, 0xd7, 0x77, 0x27, 0x54,
-0x7e, 0x4c, 0x1a, 0x85, 0x14, 0xe3, 0x3f, 0x3f,
-0xc2, 0xf9, 0x14, 0xb5, 0x5e, 0xa3, 0x90, 0x4c,
-0x61, 0xfe, 0x63, 0xfd, 0x22, 0x3b, 0x5b, 0xf2,
-0xa4, 0x51, 0x48, 0x71, 0xfe, 0xd3, 0x06, 0x13,
-0x0f, 0xc5, 0xbd, 0x47, 0xa9, 0x28, 0xff, 0x91,
-0x57, 0xc2, 0xea, 0xee, 0xf8, 0x5f, 0x96, 0xc0,
-0x7f, 0x54, 0xc4, 0x3f, 0x5b, 0xd5, 0xa8, 0xfc,
-0x07, 0xbd, 0xad, 0x29, 0x07, 0x2b, 0xed, 0xaf,
-0x86, 0xa2, 0xf1, 0x1f, 0x45, 0xad, 0x2c, 0x21,
-0xfe, 0x67, 0xc9, 0x54, 0xcb, 0x37, 0x49, 0xe3,
-0x8c, 0x53, 0xaa, 0x7b, 0x7f, 0x3e, 0xff, 0x49,
-0x1c, 0x8c, 0x27, 0xa2, 0xf3, 0x1f, 0x7f, 0x20,
-0x59, 0x14, 0xfe, 0x93, 0xc8, 0xc7, 0x5b, 0x4b,
-0xe1, 0x3f, 0x4a, 0xd6, 0x4b, 0xa4, 0x6d, 0x64,
-0xf3, 0x9f, 0x94, 0x6f, 0xbd, 0x95, 0xcb, 0xc9,
-0x7a, 0x23, 0xf0, 0x9f, 0x93, 0x95, 0xd7, 0x91,
-0x78, 0xaa, 0xe2, 0xfc, 0x67, 0xc9, 0xc8, 0xac,
-0x69, 0xa9, 0x85, 0xd8, 0x7f, 0xdc, 0xf9, 0x70,
-0xf8, 0x8f, 0xb8, 0x02, 0x2c, 0x86, 0xfd, 0xa5,
-0xf0, 0x9f, 0x4c, 0x62, 0x6f, 0xbc, 0x39, 0x3a,
-0xff, 0x69, 0xc5, 0xf9, 0x47, 0xcd, 0xa5, 0xf0,
-0x1f, 0x45, 0x25, 0xe3, 0x8b, 0xf3, 0x1f, 0xf4,
-0x7e, 0x57, 0x5f, 0x89, 0xbe, 0x12, 0x23, 0xf3,
-0x9f, 0x56, 0x2a, 0x11, 0xbb, 0x38, 0xff, 0xf9,
-0x2b, 0xbd, 0xfa, 0x64, 0x49, 0xfc, 0x27, 0x5b,
-0x7d, 0x5a, 0x6a, 0x2e, 0x81, 0xff, 0x68, 0xf1,
-0xdd, 0xa4, 0x51, 0x48, 0x24, 0xfe, 0x53, 0x2f,
-0xca, 0x25, 0xf0, 0x9f, 0xae, 0x38, 0x2d, 0xcf,
-0x20, 0xff, 0xe9, 0x78, 0x30, 0x4c, 0x63, 0x86,
-0x87, 0x9a, 0x4b, 0xe2, 0x3f, 0x7b, 0x4a, 0xe4,
-0x3f, 0x03, 0x44, 0xfe, 0x2c, 0xfe, 0x93, 0x09,
-0xd3, 0x9e, 0x96, 0x92, 0xf8, 0xcf, 0x4d, 0xe4,
-0x79, 0x89, 0xc4, 0x7f, 0x66, 0xfa, 0xe6, 0xba,
-0xa6, 0x95, 0x48, 0xfc, 0xa7, 0x3b, 0x6e, 0x7f,
-0xb5, 0xf1, 0xee, 0x4e, 0x1e, 0xff, 0x21, 0xf6,
-0x1f, 0x74, 0x0c, 0xd5, 0x97, 0xc8, 0x7f, 0x4e,
-0x7b, 0xe7, 0x57, 0x53, 0x24, 0xfe, 0xe3, 0xe8,
-0x9f, 0xf1, 0xf8, 0x8e, 0x28, 0xf1, 0x3f, 0x63,
-0x48, 0xed, 0xcc, 0x8d, 0xce, 0x7f, 0xd0, 0x41,
-0xd0, 0x6e, 0xc9, 0x73, 0x3b, 0x8f, 0xff, 0xf8,
-0xf5, 0x27, 0x52, 0xb3, 0x4f, 0x5a, 0xfa, 0xf3,
-0x1e, 0x7c, 0xe5, 0xdd, 0x48, 0xfc, 0x87, 0x65,
-0xff, 0x61, 0xc5, 0xff, 0x58, 0x1a, 0x7e, 0x2c,
-0x91, 0x95, 0x96, 0x83, 0x12, 0xf8, 0x4f, 0x65,
-0x9e, 0x14, 0x7e, 0x8c, 0xe2, 0xff, 0x52, 0xe8,
-0xf1, 0x7c, 0xfe, 0xe3, 0x81, 0x4a, 0xea, 0xbc,
-0xe3, 0xf2, 0x1f, 0x0b, 0xd8, 0x12, 0x4b, 0xf4,
-0x92, 0x42, 0xc4, 0x2c, 0xfe, 0xd3, 0xe9, 0x3f,
-0xdf, 0xf9, 0xfc, 0x47, 0xbd, 0x0c, 0x6f, 0x8c,
-0x1c, 0xff, 0x63, 0x62, 0xfe, 0x03, 0x1a, 0x8b,
-0xd9, 0x7f, 0x3c, 0xfb, 0xf3, 0x44, 0xcc, 0x0b,
-0xa2, 0x8b, 0x6a, 0xff, 0x11, 0x82, 0xd9, 0xee,
-0x04, 0xb8, 0xa9, 0x76, 0xc4, 0xff, 0x65, 0xf1,
-0x1f, 0x91, 0xd3, 0x46, 0x87, 0x61, 0xff, 0xe1,
-0xf9, 0xbf, 0xa2, 0xe6, 0x7f, 0x15, 0xb3, 0xff,
-0x9c, 0x62, 0xef, 0x87, 0x82, 0xf6, 0x9f, 0xe7,
-0x8a, 0xbe, 0x2f, 0x50, 0xfe, 0xaf, 0x68, 0xf1,
-0x3f, 0x94, 0xff, 0x2b, 0x9a, 0xfd, 0xc7, 0xf3,
-0x7f, 0x05, 0xfa, 0xc3, 0x72, 0xec, 0x3f, 0xde,
-0xf3, 0x18, 0xcd, 0xfe, 0xc3, 0xad, 0x8f, 0xcd,
-0xb3, 0xff, 0x78, 0xfa, 0x0d, 0xfa, 0xed, 0x3f,
-0x7f, 0x62, 0x81, 0x8a, 0x42, 0xfd, 0x41, 0x22,
-0xf9, 0xdf, 0x41, 0x31, 0xfe, 0xc3, 0xcd, 0xff,
-0x8a, 0x68, 0xff, 0x71, 0xe7, 0x1f, 0xd5, 0xfe,
-0xe3, 0xce, 0xff, 0xb3, 0xb1, 0xff, 0x1c, 0xf7,
-0xf3, 0x1f, 0xbd, 0x98, 0x3d, 0x84, 0xf8, 0xbf,
-0x3e, 0x23, 0xfb, 0x8f, 0x3f, 0xff, 0x4b, 0x0f,
-0x0c, 0x53, 0xbc, 0x0c, 0xa9, 0xef, 0x7d, 0x42,
-0xfb, 0x0f, 0xf1, 0x7f, 0x61, 0xfe, 0xa3, 0x05,
-0x96, 0x59, 0x11, 0xea, 0x0f, 0xe2, 0xed, 0x9f,
-0xc2, 0xf6, 0x1f, 0x85, 0x95, 0xff, 0x45, 0xec,
-0x3f, 0xdc, 0xc4, 0x2e, 0xc2, 0x7f, 0xa6, 0x23,
-0xd9, 0x7f, 0xce, 0x95, 0x68, 0xff, 0xe1, 0xe4,
-0x7f, 0x7d, 0x36, 0xf6, 0x1f, 0xa5, 0xf8, 0xf3,
-0x4b, 0xfc, 0x5f, 0xd1, 0xec, 0x3f, 0xef, 0xd0,
-0xfc, 0x47, 0xf9, 0x8d, 0x5a, 0x54, 0x9f, 0x10,
-0x7e, 0x12, 0xbb, 0x24, 0x5c, 0xfe, 0xc1, 0xca,
-0xa9, 0xf2, 0x22, 0xf6, 0x1f, 0x57, 0x3e, 0xbe,
-0xfe, 0xb0, 0x7c, 0xfb, 0x0f, 0xc9, 0xff, 0xf2,
-0xf3, 0x9f, 0x05, 0xec, 0xf1, 0x3e, 0xfe, 0xa3,
-0x50, 0x61, 0xcf, 0x09, 0x8e, 0xfd, 0x87, 0xca,
-0xff, 0x7a, 0x5c, 0x59, 0x49, 0x56, 0xb7, 0x90,
-0x63, 0x3f, 0x27, 0xfc, 0x47, 0xbf, 0x72, 0xfe,
-0x53, 0x28, 0xff, 0x0b, 0x46, 0xb2, 0xff, 0x14,
-0xf3, 0x7f, 0xb9, 0x40, 0x29, 0xce, 0x7f, 0xd6,
-0x87, 0xe4, 0xb3, 0x3e, 0xc0, 0x7f, 0x98, 0xfe,
-0x41, 0x0c, 0xbc, 0x7c, 0x7f, 0x9a, 0xff, 0x7c,
-0xfd, 0xa3, 0x9a, 0x52, 0xed, 0x3f, 0x97, 0xe0,
-0xd2, 0xe6, 0xc4, 0x64, 0x79, 0x3b, 0x98, 0x84,
-0xd7, 0x6a, 0x55, 0x93, 0xd2, 0xec, 0x22, 0xfe,
-0xaf, 0x67, 0x61, 0x23, 0x50, 0xfa, 0x44, 0x6d,
-0x64, 0xb7, 0x82, 0x00, 0xc8, 0x2c, 0xb4, 0x68,
-0xcf, 0x2c, 0xae, 0xff, 0xeb, 0x59, 0xc1, 0x50,
-0x94, 0x5a, 0x51, 0x86, 0x10, 0x34, 0x6a, 0x0a,
-0xa8, 0x95, 0x83, 0xfb, 0x21, 0x60, 0xff, 0x79,
-0x56, 0x46, 0xb7, 0x55, 0xc5, 0x55, 0x60, 0x37,
-0x40, 0x00, 0xa2, 0xd7, 0xae, 0x82, 0xf1, 0xcf,
-0xea, 0x6f, 0x40, 0xbb, 0xd1, 0xba, 0x5b, 0x6a,
-0x04, 0xaf, 0xc0, 0xc3, 0x30, 0x71, 0xb0, 0xba,
-0x25, 0x6c, 0x1f, 0x0b, 0xe4, 0x7f, 0xbd, 0xb8,
-0xaa, 0x7a, 0x54, 0x3a, 0xa8, 0x7f, 0xac, 0xae,
-0x84, 0xb3, 0x66, 0xe6, 0x5c, 0x08, 0x15, 0x12,
-0x0f, 0xda, 0x7f, 0xfe, 0xdc, 0x48, 0x0c, 0x4b,
-0x0b, 0xd5, 0x57, 0x60, 0x3b, 0x4c, 0x1c, 0x91,
-0x5a, 0x42, 0xf9, 0xdd, 0x7e, 0xfb, 0x0f, 0x62,
-0xfb, 0x86, 0x32, 0x8c, 0xa6, 0x7d, 0x1f, 0xd4,
-0xa0, 0x72, 0xa4, 0xb6, 0xc5, 0x5f, 0x0f, 0x2a,
-0x64, 0xff, 0x39, 0x0c, 0xae, 0x81, 0x8a, 0x26,
-0x2a, 0xe0, 0x7e, 0xa0, 0xe1, 0xfe, 0x20, 0xb2,
-0x2a, 0x59, 0x62, 0x51, 0x27, 0xdd, 0xd2, 0x01,
-0x7e, 0xfb, 0xcf, 0xd3, 0x70, 0xf1, 0x88, 0x72,
-0x87, 0xf8, 0x25, 0xb0, 0x13, 0xe7, 0x83, 0x77,
-0x89, 0x37, 0x84, 0xf2, 0xc1, 0xfd, 0xfe, 0xaf,
-0x73, 0xe0, 0x0f, 0x91, 0x58, 0xca, 0x5b, 0xc1,
-0x31, 0x90, 0xd6, 0x13, 0x20, 0x2e, 0xe3, 0xfe,
-0x20, 0x05, 0xfc, 0x5f, 0x97, 0x9c, 0xb6, 0x71,
-0xc2, 0x25, 0x5c, 0x36, 0xc1, 0x94, 0xfe, 0xa7,
-0xb8, 0xff, 0x6b, 0x2a, 0xf1, 0x58, 0x27, 0x12,
-0x0b, 0xb4, 0xf2, 0x13, 0x8f, 0x89, 0x41, 0xf9,
-0x84, 0xed, 0x3f, 0x2d, 0x46, 0x65, 0x4a, 0xdc,
-0x05, 0xf6, 0x63, 0xed, 0x71, 0x0a, 0xec, 0x2a,
-0xea, 0xff, 0x52, 0xee, 0x16, 0xe7, 0x83, 0x47,
-0xec, 0xb0, 0x9f, 0x37, 0x42, 0xeb, 0x0d, 0xd8,
-0x7f, 0xf4, 0x56, 0xb3, 0x0b, 0x67, 0xcf, 0x3d,
-0x84, 0x89, 0xf4, 0x57, 0x6b, 0x5f, 0x31, 0x83,
-0xfd, 0x56, 0x02, 0xf6, 0x1f, 0x75, 0x45, 0x3e,
-0x31, 0x22, 0x29, 0xe0, 0x0d, 0xbd, 0x1d, 0x56,
-0x1f, 0x90, 0xde, 0x65, 0xe4, 0xbf, 0xbb, 0xf3,
-0x41, 0xfc, 0x47, 0xb5, 0xca, 0xfe, 0x58, 0x65,
-0x00, 0x15, 0xab, 0x3f, 0xc8, 0x4c, 0x34, 0xff,
-0xd7, 0x2f, 0x20, 0x4e, 0xeb, 0x4e, 0xb0, 0xf9,
-0x8f, 0xdf, 0xfe, 0x73, 0x67, 0x36, 0xbe, 0x57,
-0xfc, 0x25, 0xb8, 0x4f, 0x6f, 0xd3, 0x2b, 0xf7,
-0xd6, 0x15, 0xe7, 0x3f, 0x4b, 0xf4, 0xf8, 0x09,
-0xf1, 0x3c, 0xf8, 0x3e, 0x02, 0x0a, 0x06, 0xc5,
-0xfc, 0x5f, 0x8b, 0x7b, 0xe3, 0x3d, 0xe2, 0x87,
-0x60, 0xd0, 0x5c, 0x9c, 0xad, 0xec, 0x11, 0x4f,
-0x16, 0xf5, 0x7f, 0xb5, 0x82, 0x6a, 0xd0, 0x64,
-0x22, 0x35, 0xbf, 0x02, 0x87, 0xfd, 0x84, 0xd7,
-0x5b, 0x38, 0xfe, 0x39, 0x7c, 0xe2, 0x07, 0xed,
-0x3f, 0x2b, 0xf5, 0xc4, 0x49, 0xe9, 0x57, 0xb8,
-0xfe, 0x8f, 0x99, 0x38, 0x21, 0x5d, 0xe7, 0x1f,
-0xbf, 0x8b, 0x11, 0xff, 0xac, 0xe0, 0x6a, 0x36,
-0xea, 0x11, 0xa4, 0x1f, 0xaa, 0xa0, 0x18, 0xea,
-0x0f, 0xd2, 0x18, 0xb2, 0xff, 0x64, 0x70, 0xb4,
-0x0f, 0x3c, 0x34, 0x4b, 0x43, 0xa0, 0x2f, 0x6c,
-0x01, 0x0b, 0xda, 0x7f, 0x5a, 0xed, 0x6a, 0x3f,
-0x87, 0x40, 0xa3, 0x5e, 0x91, 0x16, 0xc3, 0x8c,
-0x28, 0x9c, 0xff, 0x95, 0xd8, 0x6b, 0x95, 0x79,
-0x3c, 0x8c, 0x7f, 0xdf, 0x66, 0x06, 0xff, 0x71,
-0xf7, 0xa7, 0x93, 0xff, 0x95, 0x59, 0x52, 0x90,
-0xff, 0x30, 0xe2, 0x9f, 0x07, 0xe2, 0x0d, 0xe8,
-0xd8, 0x64, 0xd7, 0x3f, 0xec, 0x0c, 0xe6, 0x7f,
-0x2d, 0xf9, 0x61, 0x7c, 0x4a, 0xbc, 0x09, 0xfc,
-0x35, 0x68, 0x43, 0x40, 0xba, 0x3b, 0xd0, 0x31,
-0x96, 0x19, 0xff, 0x7c, 0x5d, 0x5f, 0x02, 0xf4,
-0x83, 0xb6, 0xa9, 0xf5, 0xe9, 0x5a, 0xa5, 0x00,
-0xff, 0x71, 0xf2, 0xbf, 0x74, 0xdc, 0xa6, 0xb9,
-0x66, 0xd0, 0x36, 0x9b, 0x74, 0x17, 0xce, 0xff,
-0x42, 0x24, 0x67, 0xf1, 0x48, 0xf5, 0xb4, 0xd4,
-0x0e, 0x5e, 0xc6, 0x6c, 0x67, 0x5a, 0xba, 0xba,
-0x78, 0xfc, 0x33, 0x5e, 0xdd, 0x7b, 0xb8, 0xed,
-0xb2, 0x89, 0xc0, 0x74, 0x01, 0xff, 0x17, 0xce,
-0xff, 0x3a, 0x43, 0x9f, 0x56, 0xb3, 0x2e, 0x48,
-0xbf, 0x0e, 0x9d, 0x5f, 0xa1, 0xfc, 0xaf, 0x71,
-0xdc, 0x9f, 0x5a, 0x7f, 0x0a, 0x2c, 0x19, 0x55,
-0xb2, 0x48, 0xff, 0x78, 0xf3, 0xf7, 0xea, 0x1f,
-0xba, 0xf7, 0xc7, 0xfc, 0xc7, 0xf1, 0x76, 0x9d,
-0xc0, 0xf9, 0xf2, 0x66, 0xa5, 0x21, 0xfe, 0xbc,
-0x50, 0xfc, 0xb3, 0x9b, 0xff, 0xa5, 0x22, 0xe9,
-0x1d, 0xc4, 0x66, 0x10, 0x80, 0xa4, 0x41, 0xe4,
-0x69, 0x37, 0x42, 0x3d, 0xe5, 0xcb, 0xff, 0x7a,
-0x93, 0xf8, 0xbf, 0xac, 0x42, 0xbb, 0xef, 0x42,
-0x7e, 0xfc, 0xb3, 0x63, 0xff, 0xd1, 0xed, 0x6f,
-0x75, 0xeb, 0x5b, 0x4a, 0x3e, 0x76, 0x46, 0x58,
-0xd3, 0xdb, 0x41, 0xfe, 0x03, 0xab, 0xa7, 0x84,
-0x19, 0x2c, 0x8d, 0xe9, 0xaa, 0xf3, 0x12, 0x3e,
-0xef, 0x96, 0xf8, 0xf4, 0x39, 0x95, 0xff, 0x65,
-0xe7, 0xbf, 0x83, 0xf5, 0xb8, 0x4d, 0xed, 0x73,
-0x23, 0x56, 0x18, 0xcf, 0x74, 0xd8, 0x9f, 0x65,
-0x10, 0xfe, 0xb3, 0x5d, 0xb0, 0x2e, 0x1e, 0xc2,
-0xdf, 0x6a, 0x6d, 0x7a, 0x05, 0x73, 0x3c, 0x33,
-0xfe, 0x59, 0x45, 0xd2, 0xd0, 0x95, 0xb4, 0x25,
-0x9f, 0xed, 0xb6, 0x7c, 0x96, 0x86, 0xec, 0x3f,
-0x8a, 0x6b, 0xe4, 0x29, 0x9f, 0xb2, 0x16, 0x5e,
-0xe5, 0xae, 0xb7, 0x58, 0xfe, 0x57, 0xe7, 0xf3,
-0x76, 0xfd, 0xba, 0x19, 0xe9, 0x42, 0x98, 0xff,
-0x90, 0xfc, 0xaf, 0xef, 0x5f, 0x00, 0xaf, 0x82,
-0xa5, 0xf4, 0x6e, 0xe9, 0x2c, 0x68, 0xff, 0x41,
-0xf2, 0x1f, 0x2a, 0x6e, 0xff, 0xf1, 0x7e, 0xdf,
-0x09, 0xf0, 0x80, 0xda, 0x2f, 0x97, 0x60, 0xff,
-0x91, 0x9f, 0xa8, 0x1d, 0xd2, 0x16, 0x72, 0xed,
-0x3f, 0x62, 0xb0, 0xfe, 0xa1, 0xfc, 0x04, 0x62,
-0x23, 0x4f, 0x47, 0xb6, 0xff, 0xe4, 0xc0, 0x93,
-0x68, 0x51, 0xcb, 0x3c, 0x69, 0x8c, 0x62, 0xa0,
-0xb9, 0xf2, 0x49, 0x85, 0xf9, 0x0f, 0xc0, 0xf7,
-0x6f, 0x77, 0xef, 0xc6, 0x30, 0x34, 0x8d, 0xfa,
-0xf8, 0xcf, 0x85, 0xfa, 0x85, 0xd9, 0xa1, 0xe1,
-0x90, 0xfd, 0x8a, 0x6b, 0xff, 0x31, 0xe5, 0xc5,
-0x60, 0xc8, 0xd4, 0x7c, 0xd2, 0x38, 0x5e, 0x20,
-0xfe, 0x67, 0x06, 0xcc, 0x17, 0x73, 0x81, 0xe8,
-0xdf, 0xb7, 0x34, 0x7e, 0xfe, 0xd7, 0x1d, 0x60,
-0x31, 0x18, 0x03, 0x07, 0x5d, 0xb6, 0x73, 0x5d,
-0xd0, 0xfe, 0xa3, 0x06, 0xf9, 0x4f, 0xfd, 0xe3,
-0xfc, 0xb2, 0x12, 0x44, 0x9e, 0x9e, 0xfe, 0x51,
-0xe4, 0x03, 0x89, 0x63, 0x44, 0x3e, 0x45, 0xe3,
-0x7f, 0xa6, 0xd5, 0x7d, 0xe8, 0x19, 0xe6, 0xb4,
-0x85, 0x65, 0xd6, 0x7f, 0x7e, 0x58, 0xde, 0xd5,
-0xb7, 0xbf, 0x84, 0xf8, 0x9f, 0x7f, 0x06, 0x39,
-0x5d, 0x2b, 0xb2, 0xdf, 0x08, 0xff, 0x99, 0x90,
-0x9f, 0x85, 0xc7, 0xa9, 0x68, 0x67, 0x07, 0x88,
-0x7c, 0xfe, 0x33, 0x22, 0x06, 0xdb, 0xc2, 0xbe,
-0xad, 0x14, 0xe0, 0x3f, 0xe0, 0x27, 0xc6, 0x28,
-0x68, 0xf7, 0x9f, 0xfe, 0x05, 0xf9, 0xcf, 0x02,
-0x78, 0xdf, 0x54, 0xa3, 0xd3, 0x1f, 0xd6, 0x39,
-0x76, 0x61, 0x01, 0xfe, 0x23, 0x37, 0x8b, 0x43,
-0x6a, 0xa0, 0x8d, 0xa9, 0xfe, 0x55, 0x91, 0x5f,
-0xff, 0x39, 0x26, 0xe6, 0xf4, 0x91, 0xc8, 0xf1,
-0x3f, 0xdd, 0x8a, 0x89, 0xf4, 0x53, 0x3b, 0xc3,
-0xdf, 0xc7, 0xb3, 0xff, 0x20, 0x1a, 0x13, 0xb4,
-0xe7, 0x84, 0xf9, 0x8f, 0x97, 0x7f, 0x91, 0xaa,
-0xfa, 0x55, 0xdf, 0xbf, 0x19, 0x7e, 0xf9, 0x84,
-0xfb, 0xa3, 0xbd, 0x4c, 0xd5, 0x3f, 0x9c, 0x80,
-0xbb, 0xb5, 0x46, 0xbf, 0xd9, 0x47, 0xe6, 0xc7,
-0xff, 0x18, 0x60, 0x10, 0xe6, 0x0c, 0x2d, 0x72,
-0xfc, 0xcf, 0x11, 0xc4, 0x67, 0xee, 0xd3, 0x39,
-0x6d, 0x61, 0x59, 0xfc, 0x47, 0xfe, 0x31, 0x78,
-0x05, 0xd1, 0x1e, 0x6b, 0xb6, 0x11, 0xec, 0x3f,
-0x13, 0x60, 0xa0, 0xac, 0x94, 0xf8, 0x1f, 0x05,
-0xec, 0x6f, 0x34, 0xc3, 0xf2, 0xe7, 0xc6, 0xff,
-0x28, 0x03, 0x5f, 0x45, 0xb4, 0xa7, 0xd1, 0x67,
-0xed, 0xb9, 0xa8, 0xf3, 0xed, 0x3f, 0x8a, 0x5c,
-0x0d, 0xfa, 0x60, 0xb1, 0xe7, 0x85, 0xf0, 0x1f,
-0x01, 0xcc, 0x5d, 0xb8, 0x53, 0x2f, 0xf6, 0xfc,
-0x12, 0xff, 0x97, 0x02, 0xaf, 0x46, 0xaf, 0xd5,
-0x87, 0x7c, 0x6c, 0xe7, 0xf5, 0x02, 0xf1, 0x3f,
-0x2d, 0xf2, 0x01, 0x86, 0x35, 0xc3, 0xbd, 0xa2,
-0x86, 0xf9, 0x8f, 0xfc, 0x42, 0xd7, 0x24, 0xf4,
-0x9d, 0x5f, 0xd2, 0x1b, 0xe0, 0x83, 0x3e, 0x5e,
-0xfc, 0xcf, 0x3f, 0x82, 0xe7, 0xdf, 0xd9, 0x69,
-0xbf, 0x76, 0x79, 0xb3, 0x3d, 0xa5, 0xbb, 0xef,
-0x5f, 0x72, 0x28, 0xfe, 0x67, 0x04, 0x0c, 0xab,
-0x3b, 0x03, 0xfa, 0xea, 0x64, 0x28, 0xf1, 0x8d,
-0xd8, 0x7f, 0x70, 0x7f, 0xd8, 0xfe, 0x80, 0x3c,
-0xcd, 0x50, 0xbf, 0x4b, 0xe2, 0xff, 0x52, 0xd0,
-0xf9, 0x75, 0x6c, 0x77, 0x50, 0x7f, 0x06, 0x1b,
-0xc1, 0xd3, 0xf1, 0x3f, 0x8f, 0x63, 0xa5, 0xe4,
-0x7c, 0x2b, 0x58, 0x20, 0xd0, 0x3f, 0xee, 0xcb,
-0x3e, 0xfb, 0x0f, 0x38, 0xd2, 0x72, 0x2e, 0x54,
-0xf6, 0xe7, 0x4c, 0x80, 0x0f, 0x10, 0xff, 0xd7,
-0xa8, 0xbc, 0x20, 0xff, 0x1c, 0xf4, 0x9f, 0x5f,
-0x63, 0xce, 0xfb, 0x7b, 0xa3, 0x7b, 0xa5, 0x9d,
-0xee, 0x0f, 0xdb, 0x02, 0x8e, 0x04, 0xc6, 0x4f,
-0xeb, 0x81, 0x8c, 0xf8, 0x0c, 0x65, 0xff, 0x51,
-0x13, 0xe8, 0x7d, 0x7f, 0xa4, 0x88, 0x7c, 0x28,
-0xfe, 0x33, 0xbc, 0x1d, 0x6d, 0xf2, 0xc3, 0x01,
-0xf9, 0xbc, 0x49, 0xef, 0x87, 0x72, 0xda, 0xfe,
-0x03, 0xc3, 0xf1, 0xcf, 0x9d, 0x81, 0xfa, 0xcf,
-0x0f, 0x32, 0xe2, 0x7f, 0x26, 0xac, 0xdd, 0xf2,
-0x2a, 0x06, 0x33, 0xc5, 0xe3, 0x9f, 0xfb, 0xda,
-0xb6, 0x59, 0x6c, 0x67, 0x08, 0xb6, 0xcd, 0xc4,
-0x9f, 0x67, 0xf0, 0x9f, 0x50, 0x7f, 0xd8, 0x51,
-0xdc, 0xaf, 0x53, 0xe9, 0x17, 0x5a, 0x4f, 0xc4,
-0x9b, 0x19, 0xcf, 0xd7, 0xb9, 0x60, 0xfc, 0x8f,
-0x8e, 0xa5, 0x9d, 0x41, 0x62, 0x9f, 0xb0, 0x89,
-0x25, 0xdf, 0xfe, 0x43, 0xfa, 0x5f, 0x58, 0x65,
-0xf7, 0x5e, 0xab, 0x3e, 0xd2, 0x14, 0x3e, 0x7f,
-0x47, 0xbd, 0xf9, 0xbf, 0x8d, 0xfb, 0x5f, 0x88,
-0xf7, 0x9a, 0xf6, 0x32, 0xb1, 0x5b, 0xf9, 0x20,
-0xcb, 0x3e, 0xc6, 0xee, 0x0f, 0x6b, 0x99, 0x35,
-0x46, 0x3c, 0xb7, 0x63, 0x8d, 0x17, 0xba, 0x4f,
-0xf8, 0xcf, 0x31, 0xb9, 0xd5, 0x2a, 0x53, 0x39,
-0x74, 0xb8, 0xf6, 0xb8, 0xb3, 0x6d, 0x32, 0xad,
-0x2a, 0xe1, 0x6f, 0xc1, 0xfc, 0xaf, 0x77, 0x04,
-0xcf, 0xfe, 0xfc, 0x2a, 0xec, 0xcf, 0xe1, 0xfa,
-0x90, 0x99, 0xb0, 0x87, 0x74, 0xc6, 0xdb, 0x0e,
-0xb7, 0x0b, 0xf3, 0x65, 0xdc, 0x16, 0x16, 0x9f,
-0xfe, 0x99, 0x5d, 0x36, 0x08, 0x7b, 0xc4, 0x7c,
-0xfd, 0x2f, 0x9c, 0xfa, 0xcf, 0x9d, 0x93, 0xc6,
-0x4b, 0xca, 0x72, 0x58, 0xad, 0x79, 0x61, 0x3f,
-0x9d, 0xac, 0xfe, 0xb0, 0x56, 0xfc, 0xcf, 0x32,
-0x4c, 0x9b, 0x4f, 0xeb, 0x97, 0xd5, 0x95, 0xe3,
-0xd5, 0xff, 0x45, 0xc9, 0x47, 0xf7, 0xec, 0x3f,
-0xee, 0x7a, 0x9d, 0xfa, 0x5d, 0x53, 0xe8, 0xb5,
-0x65, 0x12, 0xbc, 0x04, 0x91, 0xa2, 0xce, 0xb3,
-0xfa, 0xc3, 0x12, 0xfd, 0xef, 0xd4, 0xdf, 0x50,
-0xb0, 0x1a, 0xd9, 0x05, 0x1a, 0xf0, 0xe9, 0x13,
-0x8e, 0x28, 0x38, 0x47, 0xf1, 0x4f, 0x6c, 0xff,
-0x69, 0x9d, 0xaa, 0xb4, 0xcb, 0x1e, 0x36, 0x8c,
-0xc4, 0xbb, 0x18, 0xeb, 0xa5, 0xfc, 0x5f, 0xf6,
-0xfb, 0xd7, 0xb8, 0x95, 0x6d, 0xd1, 0x0f, 0x90,
-0x22, 0xba, 0x4a, 0xa4, 0xdf, 0x38, 0x1c, 0xff,
-0x57, 0x30, 0xfe, 0x67, 0xa4, 0x4c, 0x43, 0x2f,
-0xa1, 0xc7, 0xc4, 0x9f, 0xa2, 0x17, 0xa5, 0xb8,
-0x15, 0xf6, 0x03, 0xcb, 0x7d, 0xfc, 0xc7, 0xbb,
-0xbf, 0xe3, 0xff, 0x7a, 0x10, 0xd1, 0x1e, 0xfd,
-0x02, 0x58, 0xce, 0xf3, 0x7f, 0xb9, 0xe3, 0x3d,
-0xfb, 0xcf, 0xdf, 0x49, 0xcd, 0xe8, 0xa0, 0x6c,
-0xd3, 0x37, 0xa8, 0x94, 0x7d, 0x40, 0xf5, 0xf8,
-0x8f, 0x3b, 0x9e, 0xf2, 0x7f, 0x2d, 0x02, 0xb8,
-0xec, 0x70, 0x55, 0xbe, 0x32, 0xec, 0xe1, 0x9a,
-0xf6, 0x7e, 0x5f, 0xd2, 0xff, 0xe2, 0xea, 0x85,
-0xc0, 0x29, 0x53, 0x1c, 0x1e, 0x4f, 0xf9, 0xbf,
-0x80, 0x6b, 0xfd, 0x28, 0x93, 0x6b, 0x71, 0x19,
-0xc0, 0x0a, 0x55, 0x0c, 0xd9, 0x43, 0x1a, 0xa9,
-0xfc, 0x77, 0xc5, 0xb0, 0xda, 0xc2, 0xa2, 0x45,
-0xb5, 0xe0, 0xb2, 0xab, 0xd8, 0xfe, 0x13, 0xee,
-0xbf, 0x40, 0xea, 0x3f, 0xdb, 0xf6, 0x9f, 0x95,
-0xd9, 0xea, 0x7c, 0xd3, 0x79, 0x1b, 0x90, 0xb0,
-0x9f, 0x3a, 0x56, 0xfe, 0xbb, 0xed, 0x3f, 0xca,
-0x54, 0x9f, 0x90, 0xfe, 0x14, 0xbc, 0x8f, 0x41,
-0xbe, 0x3f, 0xcc, 0x07, 0xa8, 0xfe, 0x17, 0x4e,
-0xfd, 0xc3, 0x21, 0xc4, 0x76, 0x70, 0xdb, 0x0b,
-0x35, 0x3e, 0xc0, 0xf2, 0x7f, 0x91, 0xfa, 0xbd,
-0x6e, 0xfc, 0x4f, 0x5a, 0x0c, 0xb7, 0xf9, 0xb0,
-0xc1, 0x7a, 0x35, 0xf3, 0x9a, 0xe0, 0x8e, 0x4f,
-0xc5, 0x6c, 0x6b, 0xcf, 0x50, 0x5e, 0xfc, 0x05,
-0x96, 0xa7, 0x21, 0xe5, 0x81, 0x2b, 0xc6, 0x5a,
-0x4e, 0xfd, 0x67, 0x67, 0x92, 0x76, 0xbf, 0xd7,
-0xf2, 0x87, 0x05, 0x06, 0xff, 0x21, 0xfe, 0x0e,
-0x2f, 0x1f, 0x50, 0xd8, 0x56, 0xc0, 0xff, 0xc5,
-0xe8, 0x7f, 0x51, 0x37, 0xd5, 0x88, 0xe4, 0x2f,
-0x4c, 0x52, 0x61, 0x3f, 0x96, 0x29, 0x32, 0x10,
-0xff, 0x33, 0xe0, 0xf9, 0xbf, 0x7e, 0x0e, 0xef,
-0xd7, 0xda, 0xa0, 0x32, 0x22, 0xdd, 0x41, 0xd9,
-0x7f, 0xc4, 0x36, 0x5e, 0x7f, 0xd8, 0xc6, 0xe3,
-0x42, 0x3f, 0xb4, 0xda, 0x74, 0x86, 0x33, 0x98,
-0xa8, 0xfe, 0x17, 0x5e, 0xfc, 0xcf, 0x5d, 0xa7,
-0xd1, 0xf3, 0x8b, 0x1e, 0xcc, 0x9b, 0x18, 0xfc,
-0x27, 0x64, 0xff, 0x99, 0xda, 0x78, 0xf7, 0xa6,
-0xb7, 0xc0, 0xcf, 0x72, 0x7f, 0x34, 0xd5, 0x86,
-0x0b, 0x21, 0x7e, 0xe8, 0x34, 0x8a, 0x55, 0xc3,
-0xf5, 0x9f, 0xe7, 0xb9, 0xf9, 0x5f, 0x4d, 0x93,
-0x22, 0xd6, 0x1e, 0x55, 0xac, 0x7e, 0xe8, 0xbe,
-0xfe, 0x17, 0x56, 0xfe, 0x57, 0xe2, 0xc2, 0xa6,
-0xb7, 0x6a, 0x5f, 0xed, 0xc3, 0xc0, 0x09, 0xfb,
-0xd9, 0x78, 0xa1, 0xee, 0x92, 0x9b, 0x1a, 0xe6,
-0xeb, 0x7f, 0xe1, 0xea, 0x9f, 0xd3, 0x70, 0xd0,
-0x06, 0x44, 0xff, 0xb8, 0x85, 0x10, 0x89, 0xfd,
-0xed, 0x07, 0xb6, 0xff, 0x6b, 0x4c, 0xd9, 0x21,
-0x9e, 0x56, 0x10, 0x4d, 0x3a, 0x81, 0x14, 0x4b,
-0x58, 0x5f, 0x11, 0xfb, 0x8f, 0xd5, 0x9f, 0x5a,
-0xc0, 0xf6, 0xe7, 0xda, 0x49, 0xdc, 0x66, 0x65,
-0x54, 0x49, 0xdf, 0xef, 0xea, 0x9f, 0x5a, 0x57,
-0x9e, 0x8d, 0x54, 0xfd, 0xe7, 0xe4, 0xe3, 0xf8,
-0x10, 0x99, 0x6a, 0x45, 0xfa, 0xd3, 0x32, 0x9b,
-0xe3, 0xb0, 0xd2, 0xd0, 0x7a, 0x8f, 0x7b, 0xfa,
-0x30, 0x0f, 0xde, 0x4b, 0xd8, 0x17, 0x9b, 0x3e,
-0x00, 0xb8, 0x5e, 0x34, 0xeb, 0x7d, 0xb3, 0x89,
-0xf4, 0x87, 0xcd, 0xa9, 0x1f, 0x29, 0x97, 0xcb,
-0xd0, 0xc5, 0x99, 0xba, 0x8f, 0xc0, 0xab, 0xf8,
-0xfe, 0x0c, 0x7f, 0x50, 0xf9, 0x01, 0x8a, 0xff,
-0x6c, 0x77, 0x8a, 0xd4, 0x65, 0x3e, 0x90, 0x87,
-0x02, 0x69, 0x5c, 0x2c, 0xfb, 0x0f, 0x3e, 0xef,
-0xf0, 0xdb, 0xfd, 0xb0, 0xf8, 0x9f, 0x1a, 0xe2,
-0x03, 0x9c, 0xf1, 0xcc, 0xfa, 0x3f, 0x65, 0x98,
-0xf6, 0x30, 0xeb, 0x43, 0x52, 0xf9, 0xef, 0x74,
-0xfd, 0x9f, 0x7f, 0x95, 0x57, 0x98, 0xcc, 0xfe,
-0x56, 0x23, 0x65, 0xee, 0x7c, 0x2c, 0xfb, 0x8f,
-0x68, 0xd3, 0x1e, 0x95, 0xef, 0xff, 0x5a, 0xd8,
-0xeb, 0xfd, 0x05, 0xbb, 0xe9, 0xde, 0x77, 0x2a,
-0xe7, 0x8e, 0x21, 0x30, 0xd9, 0xb2, 0xb4, 0xf2,
-0x77, 0xa2, 0x1f, 0xa2, 0xdd, 0x74, 0x4f, 0x98,
-0x2c, 0x7e, 0x7f, 0x05, 0x8a, 0x74, 0x77, 0xbc,
-0xa5, 0xd8, 0x65, 0xf6, 0x45, 0x3f, 0xc4, 0x4f,
-0x2c, 0xff, 0x70, 0x3f, 0x44, 0x56, 0x87, 0x44,
-0xb9, 0xc0, 0xfd, 0xe7, 0x9a, 0xa5, 0xf5, 0x43,
-0x54, 0x4b, 0x94, 0xbf, 0x5a, 0x48, 0xfe, 0x8c,
-0x7e, 0x88, 0x09, 0x33, 0x24, 0xf3, 0x2f, 0xfa,
-0x21, 0x16, 0x06, 0x9f, 0xe7, 0xf1, 0xbf, 0x63,
-0xcf, 0xe3, 0x27, 0xeb, 0x0f, 0xeb, 0x44, 0x0e,
-0x04, 0xc0, 0xef, 0x8d, 0x3e, 0x9c, 0x24, 0xd2,
-0xfe, 0x4e, 0x40, 0xfe, 0x93, 0xbf, 0x2d, 0x7d,
-0x68, 0xdd, 0xed, 0x8b, 0xfe, 0xb0, 0x81, 0xcf,
-0x17, 0xfa, 0xf0, 0xff, 0xf9, 0xf8, 0xa3, 0x1d,
-0x52, 0xaf, 0x7e, 0x5a, 0xbd, 0x11, 0x54, 0x8d,
-0x5a, 0x60, 0x91, 0x1c, 0xfb, 0x99, 0xb4, 0xc3,
-0xec, 0x51, 0xe7, 0xd4, 0x57, 0x1d, 0xc5, 0x20,
-0x3b, 0x47, 0xae, 0x32, 0xaf, 0xf5, 0xc6, 0xaf,
-0x5e, 0x25, 0xef, 0x10, 0x7a, 0xf4, 0xad, 0x2a,
-0x18, 0x8f, 0xd9, 0x20, 0x49, 0x80, 0xe0, 0x00,
-0xf3, 0x5a, 0x97, 0x0f, 0x03, 0x28, 0x0a, 0x1a,
-0xec, 0xd2, 0x6a, 0x15, 0xd0, 0xe7, 0x00, 0x99,
-0x02, 0x0d, 0xb0, 0xcb, 0x40, 0xc0, 0x6b, 0x2f,
-0x83, 0xb7, 0xb8, 0xd0, 0x0b, 0xba, 0xc1, 0x6c,
-0x30, 0x08, 0x05, 0xc3, 0x02, 0xc9, 0x01, 0xe1,
-0x36, 0xa1, 0x1b, 0x6c, 0x49, 0xc5, 0x76, 0x0a,
-0x06, 0x06, 0x20, 0x46, 0x8d, 0x3f, 0xda, 0x1d,
-0xbb, 0x41, 0xf8, 0x3a, 0xdc, 0xd4, 0x21, 0xef,
-0x8e, 0xdd, 0x25, 0xf4, 0xc0, 0xad, 0x5a, 0x72,
-0xc2, 0x03, 0x02, 0x02, 0x23, 0x08, 0x50, 0xf3,
-0x39, 0xaa, 0xeb, 0x5a, 0x56, 0x91, 0xc5, 0x18,
-0xfa, 0x4b, 0x06, 0x48, 0x81, 0x32, 0x20, 0x10,
-0x20, 0xbb, 0x80, 0xac, 0xf7, 0x68, 0x97, 0x7c,
-0xbb, 0x90, 0x82, 0x6b, 0x34, 0x70, 0x9f, 0xdc,
-0x28, 0x28, 0xf9, 0x0c, 0x50, 0x77, 0xcb, 0x0d,
-0x82, 0x02, 0x32, 0x9a, 0x3a, 0x20, 0x6b, 0x36,
-0xa0, 0xc7, 0xaf, 0x8b, 0xdd, 0x32, 0xba, 0x79,
-0xe4, 0xd6, 0xd6, 0xfa, 0x59, 0xb1, 0x4c, 0x2e,
-0x9b, 0xdf, 0xac, 0xc4, 0x2a, 0x63, 0x3a, 0xcc,
-0x6a, 0xf5, 0x2d, 0x49, 0xd1, 0x06, 0xcb, 0x93,
-0x80, 0x92, 0xcf, 0x5c, 0xa1, 0x1c, 0xdc, 0x6a,
-0x26, 0xb3, 0x72, 0x42, 0xd8, 0x8a, 0x40, 0x4d,
-0x6f, 0xac, 0x47, 0xd8, 0x04, 0x36, 0x9b, 0xc9,
-0x74, 0xec, 0x8f, 0x05, 0x09, 0x83, 0x9b, 0x64,
-0xaf, 0xfc, 0x2a, 0x1a, 0xaf, 0xe9, 0x0a, 0xa8,
-0x05, 0x32, 0x44, 0xca, 0x06, 0x69, 0x3e, 0x5d,
-0xd0, 0x90, 0x0a, 0xec, 0x84, 0x2a, 0x94, 0x55,
-0x41, 0x46, 0xaa, 0x01, 0x03, 0xd0, 0x41, 0xc9,
-0xc7, 0x10, 0x91, 0xe8, 0x81, 0x86, 0x54, 0x87,
-0x05, 0x1a, 0xec, 0x50, 0x2c, 0x7c, 0x45, 0xd1,
-0xca, 0x1c, 0xd0, 0x41, 0xc9, 0x27, 0x1b, 0x6b,
-0x16, 0xbe, 0x09, 0xb6, 0xe8, 0xf5, 0x30, 0xb6,
-0xcd, 0x02, 0xf3, 0xf2, 0x31, 0x43, 0x38, 0x05,
-0xfe, 0x0c, 0x24, 0xf3, 0x31, 0xcd, 0x06, 0xf4,
-0x7a, 0xf5, 0xb8, 0x01, 0x4e, 0x81, 0x1b, 0xb0,
-0xe1, 0xc4, 0xfa, 0xbd, 0xb4, 0x24, 0x94, 0x6e,
-0x07, 0xdd, 0x70, 0x36, 0xa8, 0x22, 0x80, 0xda,
-0x3f, 0x9d, 0x72, 0x3a, 0x97, 0xd0, 0x3a, 0xd1,
-0x5f, 0x96, 0xd3, 0x30, 0xa1, 0x49, 0x8a, 0x3a,
-0x56, 0x9f, 0x1e, 0xc5, 0x57, 0xd4, 0x97, 0x80,
-0x03, 0xa8, 0xdf, 0x0b, 0x7d, 0xd2, 0xe8, 0x9d,
-0x4a, 0xc2, 0x3b, 0xc3, 0x01, 0xa6, 0x0b, 0x26,
-0xbc, 0x2b, 0x94, 0x7c, 0x24, 0x21, 0x0d, 0x37,
-0x68, 0x75, 0x78, 0x77, 0x59, 0x20, 0x51, 0x3f,
-0x26, 0xa4, 0x73, 0x1b, 0xd2, 0x9b, 0x14, 0xf9,
-0x98, 0x0b, 0xa8, 0xf1, 0x47, 0x33, 0x31, 0x23,
-0xd7, 0xad, 0x6d, 0x41, 0xe3, 0x1d, 0x10, 0x43,
-0x60, 0x14, 0x83, 0x64, 0xbf, 0xa0, 0xd9, 0x00,
-0x52, 0xf2, 0xc9, 0x58, 0x92, 0xf3, 0x44, 0x88,
-0xc0, 0x18, 0x02, 0x78, 0x21, 0x68, 0x45, 0x0e,
-0xa0, 0xd7, 0x7b, 0x8b, 0x6c, 0xe4, 0x52, 0xda,
-0x9a, 0x2e, 0xb0, 0x07, 0x81, 0xab, 0xb4, 0x35,
-0x09, 0x30, 0x26, 0x6f, 0xcb, 0x25, 0xd2, 0x9d,
-0x5d, 0x35, 0x7b, 0x64, 0xcd, 0x06, 0xb4, 0x3c,
-0x8d, 0x58, 0xb7, 0xb0, 0x05, 0xdc, 0x0a, 0xeb,
-0x35, 0x07, 0xc8, 0xe8, 0x0a, 0x58, 0x03, 0x6a,
-0x60, 0xd2, 0x88, 0xa5, 0x6c, 0xa0, 0x53, 0xfb,
-0xa7, 0x4c, 0xf8, 0x06, 0xec, 0x31, 0x92, 0xc3,
-0xb1, 0x32, 0xa1, 0x03, 0xaa, 0x86, 0x9c, 0x8a,
-0x95, 0x81, 0x0e, 0x98, 0x35, 0xea, 0x53, 0xd6,
-0x15, 0x0b, 0x10, 0x73, 0x11, 0x30, 0x6b, 0xad,
-0xbd, 0x50, 0xab, 0xcb, 0xb5, 0x02, 0x80, 0x1d,
-0x9a, 0x8a, 0x9e, 0x85, 0x1a, 0x79, 0x40, 0xd7,
-0xd4, 0x2e, 0xeb, 0x8a, 0x05, 0xd0, 0x31, 0xe6,
-0xcd, 0x67, 0x8d, 0x58, 0x03, 0x07, 0x8c, 0x05,
-0xaa, 0xb0, 0x46, 0xfa, 0x06, 0xdc, 0x6c, 0x24,
-0x53, 0x55, 0x18, 0x9c, 0x34, 0xae, 0x47, 0xa0,
-0xdc, 0x01, 0xd4, 0x7c, 0xc6, 0xd7, 0xc4, 0x76,
-0xf4, 0xf5, 0x18, 0x5b, 0x53, 0xc9, 0x97, 0x63,
-0x3b, 0x72, 0xfb, 0x8c, 0x6f, 0xa7, 0xe6, 0x61,
-0x70, 0xda, 0xf8, 0xae, 0x7d, 0xc5, 0x02, 0xb4,
-0x3e, 0x59, 0x23, 0xec, 0x80, 0xa7, 0x8d, 0x1b,
-0x53, 0x55, 0x2f, 0x4b, 0x36, 0x10, 0x30, 0xe8,
-0x31, 0xe6, 0xd8, 0x57, 0x2c, 0x60, 0xd6, 0x50,
-0xe3, 0xd1, 0x4d, 0xd0, 0xfd, 0xbb, 0xc1, 0xcb,
-0x36, 0x48, 0xa9, 0x18, 0x24, 0x8c, 0x4e, 0x74,
-0x7f, 0xd0, 0x60, 0x03, 0xb3, 0x86, 0xda, 0x3f,
-0x82, 0x06, 0xba, 0xd0, 0x13, 0xe3, 0xe9, 0x9f,
-0xd8, 0x18, 0x02, 0x3d, 0xda, 0x1c, 0x5b, 0x11,
-0x59, 0x00, 0x52, 0xbb, 0xad, 0x4c, 0xb8, 0x0d,
-0x76, 0x1b, 0xb3, 0x53, 0xc9, 0x9d, 0x1e, 0x00,
-0xb7, 0xe5, 0xba, 0x0d, 0x4b, 0xff, 0x34, 0xd8,
-0x80, 0x1a, 0xbf, 0x5a, 0x4f, 0xa6, 0x85, 0x0d,
-0x60, 0x13, 0x90, 0x61, 0xac, 0x57, 0xe8, 0x01,
-0x5b, 0x41, 0xd2, 0xf4, 0x80, 0x90, 0x76, 0x00,
-0x99, 0xcf, 0x6a, 0xb4, 0x7f, 0x46, 0x94, 0x16,
-0xb1, 0x12, 0xed, 0x1f, 0x03, 0xa6, 0xd0, 0x23,
-0x28, 0x78, 0xa0, 0x1f, 0xed, 0x1f, 0x0b, 0x40,
-0x6a, 0xbd, 0xeb, 0x64, 0x63, 0x3f, 0xda, 0x3f,
-0x95, 0x78, 0x77, 0xe5, 0x14, 0x3b, 0xc0, 0xcb,
-0x03, 0x86, 0x0d, 0xe8, 0xf1, 0x9d, 0x0b, 0xb2,
-0xa3, 0x9b, 0xdb, 0x6f, 0x55, 0x06, 0x91, 0xb6,
-0xc9, 0x65, 0x35, 0xa4, 0x7f, 0x10, 0x18, 0x40,
-0x6a, 0x47, 0x41, 0xfa, 0x27, 0x0b, 0x2d, 0x00,
-0x28, 0xf9, 0x54, 0x0a, 0xd9, 0x89, 0xcd, 0xe9,
-0xa4, 0x22, 0x77, 0x0a, 0x59, 0x13, 0x81, 0x44,
-0x2c, 0x0c, 0x74, 0x4a, 0x3e, 0x40, 0x37, 0x54,
-0x55, 0x96, 0x05, 0xc4, 0x38, 0x33, 0x58, 0xdb,
-0x58, 0x2a, 0xd0, 0x06, 0x80, 0x00, 0x32, 0x9f,
-0x8c, 0xd8, 0x08, 0xe1, 0x88, 0xd6, 0x35, 0x2c,
-0x8a, 0x00, 0xc2, 0xb4, 0xa6, 0x28, 0x16, 0xd0,
-0x10, 0x90, 0xca, 0x2c, 0x90, 0x50, 0xa8, 0xf9,
-0xac, 0xd6, 0xcb, 0x2d, 0x25, 0x2f, 0x25, 0x61,
-0xcc, 0xd6, 0xf6, 0xf3, 0xa0, 0xab, 0x7f, 0x08,
-0x20, 0xeb, 0x1d, 0xd4, 0xe7, 0x58, 0xfa, 0x47,
-0x1a, 0x84, 0x12, 0x06, 0xe8, 0x74, 0x30, 0x25,
-0x43, 0xee, 0x01, 0x73, 0x90, 0xda, 0xa9, 0xd1,
-0x80, 0x0d, 0xe8, 0xf9, 0xcb, 0x69, 0x21, 0x01,
-0x3a, 0xd1, 0x5f, 0xb6, 0x80, 0x84, 0x9e, 0x27,
-0x39, 0x0d, 0xf0, 0x83, 0xa5, 0x9a, 0x40, 0x13,
-0x1c, 0x40, 0x0d, 0xb7, 0x95, 0x8c, 0x8e, 0xf4,
-0xcf, 0xb5, 0x30, 0x61, 0x48, 0xdd, 0x60, 0x2f,
-0xb8, 0x0e, 0x54, 0x00, 0x51, 0x07, 0x27, 0xf5,
-0x66, 0x0c, 0xb0, 0x46, 0xa2, 0xc6, 0xcb, 0xd7,
-0xea, 0x1b, 0xb2, 0x75, 0xf9, 0xbd, 0x47, 0x05,
-0x04, 0x3a, 0x36, 0xd5, 0xd7, 0x23, 0xd0, 0xb1,
-0x21, 0xbb, 0xa9, 0x5e, 0x1e, 0xcf, 0x35, 0x60,
-0xa0, 0xca, 0xf4, 0xf8, 0x45, 0xb1, 0x3b, 0x46,
-0xbf, 0x95, 0xde, 0xb2, 0x3b, 0xf6, 0x23, 0x0b,
-0xcc, 0xde, 0x97, 0xb4, 0xc1, 0x96, 0x07, 0x92,
-0xff, 0x90, 0x73, 0x80, 0x6f, 0xfe, 0x36, 0xe3,
-0xc7, 0xf3, 0xb1, 0xc8, 0xa6, 0x8e, 0xe6, 0xd3,
-0x6c, 0xcf, 0x27, 0x2f, 0x3b, 0xf3, 0xf1, 0x8d,
-0xdf, 0x66, 0xd4, 0xa4, 0xe4, 0x35, 0xe8, 0xf7,
-0x5a, 0x85, 0x0f, 0xb2, 0x32, 0xad, 0x66, 0xb7,
-0x7c, 0x7b, 0x4d, 0x6a, 0x60, 0x4d, 0x43, 0xcd,
-0xc0, 0x2a, 0x07, 0xd0, 0xe3, 0xe5, 0x8e, 0x6c,
-0xcd, 0x66, 0xf9, 0x56, 0x74, 0x98, 0xc4, 0x10,
-0x88, 0x25, 0x85, 0xd8, 0xaa, 0xd5, 0x59, 0xb0,
-0x59, 0x4e, 0x82, 0xa4, 0xbe, 0x3a, 0xab, 0x6e,
-0x4e, 0x24, 0x85, 0x24, 0xbd, 0x1f, 0x94, 0x06,
-0x51, 0xd1, 0xfb, 0x54, 0x6d, 0x50, 0x69, 0xc8,
-0x28, 0xd9, 0xbe, 0x7a, 0x04, 0x84, 0x4c, 0x0a,
-0x83, 0x98, 0x72, 0xdb, 0x2d, 0xf6, 0x15, 0x7a,
-0x3a, 0x95, 0x40, 0x84, 0x60, 0x04, 0xb4, 0xa0,
-0x8d, 0x27, 0x42, 0x7d, 0x44, 0x6d, 0x91, 0x11,
-0xc8, 0xdb, 0xc0, 0x14, 0x87, 0xf5, 0x03, 0xea,
-0x35, 0x34, 0xdb, 0x06, 0x09, 0xb1, 0x0e, 0x0c,
-0x98, 0x0d, 0xe9, 0xd4, 0x06, 0x69, 0x13, 0x38,
-0x39, 0x96, 0x4c, 0x57, 0x21, 0xa0, 0x6e, 0x36,
-0xaf, 0x47, 0xc0, 0xac, 0x53, 0x4f, 0x9a, 0xd7,
-0xb7, 0x57, 0xd1, 0xf3, 0xa9, 0x10, 0xee, 0xea,
-0xe8, 0xc9, 0x6f, 0xd5, 0xe6, 0x61, 0x1a, 0x30,
-0x17, 0x7e, 0xdb, 0x06, 0xfb, 0xe0, 0x77, 0x11,
-0x1f, 0x58, 0x73, 0x97, 0x70, 0x1a, 0x81, 0xbf,
-0xa1, 0xe5, 0x1f, 0x5f, 0x97, 0x79, 0x3d, 0xff,
-0xd4, 0x81, 0xc5, 0x15, 0x5f, 0xc1, 0xe0, 0xc9,
-0x03, 0x8b, 0xd7, 0xc6, 0x6f, 0x59, 0x77, 0x62,
-0xcf, 0x53, 0xcd, 0xff, 0x54, 0x11, 0xcf, 0xac,
-0x3b, 0x89, 0xc1, 0x1f, 0xd0, 0xf3, 0x59, 0x76,
-0xef, 0xcd, 0x97, 0xff, 0xe3, 0xc5, 0xf3, 0xef,
-0x5f, 0x5c, 0x89, 0xc1, 0x33, 0xe7, 0x3f, 0xb8,
-0xb8, 0xec, 0xd2, 0xc6, 0x33, 0x0f, 0x5d, 0x3e,
-0xfb, 0xf1, 0xc5, 0x65, 0xf7, 0x6c, 0xbc, 0x8c,
-0xc1, 0xc7, 0xe0, 0x0a, 0x3e, 0x2b, 0xfe, 0xb6,
-0x62, 0x61, 0x66, 0x6d, 0x7e, 0xcf, 0xb6, 0x05,
-0x17, 0xab, 0x7f, 0xd2, 0x79, 0x39, 0xff, 0xeb,
-0x6d, 0x2b, 0xfe, 0x7e, 0xed, 0xbd, 0xaf, 0xad,
-0xcd, 0x3f, 0xf2, 0xf1, 0xca, 0xcb, 0x6b, 0x17,
-0xbd, 0xb6, 0xf6, 0xfc, 0x23, 0x67, 0xe9, 0xf1,
-0x2b, 0xef, 0xb9, 0xf9, 0xcc, 0x43, 0xcf, 0x9c,
-0x7d, 0x9f, 0x4c, 0xc3, 0x9e, 0xd8, 0xd9, 0x0f,
-0xd0, 0xf8, 0x9b, 0xcf, 0x58, 0x33, 0xa4, 0xc7,
-0x37, 0xcd, 0xef, 0x3a, 0xb3, 0xe7, 0xc6, 0xb3,
-0x0f, 0xdc, 0xb6, 0x0c, 0xff, 0xc7, 0x43, 0x67,
-0xdf, 0x7f, 0x1b, 0x81, 0xb7, 0xea, 0x9e, 0x19,
-0x78, 0xff, 0x62, 0x53, 0xca, 0x02, 0xef, 0x7d,
-0xcf, 0x37, 0xa1, 0xbe, 0x5e, 0x7d, 0x9f, 0xba,
-0x48, 0xbd, 0x6f, 0xb4, 0x11, 0x01, 0x70, 0xa3,
-0x5c, 0x71, 0x54, 0xec, 0xd5, 0xe7, 0xaa, 0x8b,
-0xea, 0x2d, 0x80, 0xbe, 0x9a, 0x5b, 0x41, 0xcb,
-0x53, 0x1e, 0xdc, 0x01, 0x10, 0x09, 0xac, 0x05,
-0xe3, 0x83, 0x98, 0x0d, 0x6e, 0xb2, 0xf8, 0x21,
-0x38, 0xed, 0x23, 0x8a, 0xf4, 0x78, 0x87, 0x1f,
-0x5e, 0x05, 0xfa, 0x73, 0x18, 0xcc, 0x56, 0xe4,
-0x9d, 0x2e, 0x3f, 0xf4, 0x00, 0xf4, 0x4d, 0xc8,
-0x26, 0x69, 0xb9, 0x20, 0x7f, 0x53, 0x69, 0x40,
-0x3e, 0xca, 0xaa, 0xbb, 0x84, 0x04, 0xec, 0x8c,
-0xc3, 0x89, 0x6d, 0xed, 0xc2, 0xdc, 0x81, 0xaf,
-0x69, 0x35, 0xc7, 0x64, 0xbc, 0x31, 0xbe, 0x76,
-0x53, 0xcd, 0x84, 0x0d, 0xb4, 0x1a, 0xd3, 0x7f,
-0x7f, 0x55, 0x29, 0x43, 0xfc, 0x70, 0x10, 0xb1,
-0x2e, 0xef, 0xfe, 0x0a, 0x06, 0x7d, 0xe4, 0x2f,
-0x92, 0x4f, 0x15, 0xa2, 0x85, 0x88, 0x1f, 0x1a,
-0x00, 0x3d, 0x56, 0x82, 0x02, 0x11, 0x1b, 0x1c,
-0x96, 0x9b, 0xd1, 0x95, 0x4c, 0xaf, 0xba, 0x0f,
-0x33, 0x46, 0x98, 0x31, 0x7c, 0xef, 0x68, 0x5f,
-0x91, 0xd7, 0x0d, 0xce, 0x7e, 0x6c, 0xf5, 0x11,
-0x75, 0xc9, 0xc0, 0xb7, 0x72, 0xb5, 0x23, 0xab,
-0x1e, 0xab, 0xb9, 0x46, 0xee, 0x32, 0x6f, 0xb1,
-0xc1, 0x3a, 0xfb, 0x0a, 0x35, 0x7b, 0xb3, 0x0a,
-0xd4, 0x81, 0xfa, 0x89, 0xd8, 0xc3, 0x60, 0x12,
-0x4a, 0xa0, 0x1e, 0x71, 0x1f, 0xfb, 0xb4, 0x31,
-0x63, 0x36, 0xa8, 0xc7, 0x40, 0x27, 0xff, 0x01,
-0xbd, 0xaa, 0xaa, 0x2a, 0x7a, 0x97, 0xed, 0x06,
-0xf8, 0x29, 0xc2, 0x6f, 0xa2, 0x82, 0x0a, 0x56,
-0xa1, 0x7f, 0xc8, 0x59, 0x61, 0xb6, 0x6a, 0xbd,
-0x34, 0xeb, 0x82, 0xe7, 0xbe, 0x46, 0xf7, 0xb7,
-0x5f, 0x57, 0x35, 0xd9, 0xff, 0xa6, 0x2a, 0xfb,
-0x5f, 0x39, 0xe9, 0xf1, 0xb2, 0x61, 0x2b, 0x49,
-0xac, 0xe8, 0x53, 0x48, 0xe3, 0x23, 0xfd, 0x69,
-0x08, 0xc3, 0x16, 0x31, 0x71, 0xbe, 0xaa, 0x81,
-0xde, 0x78, 0x55, 0xd0, 0x45, 0x03, 0x0c, 0x83,
-0xff, 0x6d, 0xdf, 0x7c, 0x5e, 0xa4, 0xb8, 0x82,
-0x38, 0x5e, 0x6f, 0xe6, 0xed, 0xa4, 0xc5, 0xd9,
-0xa5, 0x7b, 0x33, 0x0b, 0xad, 0x2c, 0x32, 0xa3,
-0xab, 0x1e, 0xbc, 0xf4, 0x2c, 0x0a, 0x8a, 0x07,
-0x9f, 0xbb, 0x33, 0xeb, 0xac, 0xb0, 0xda, 0x44,
-0x54, 0x08, 0x39, 0xb4, 0xc1, 0x8b, 0xb7, 0xec,
-0xcd, 0x4b, 0xe2, 0x9b, 0xcd, 0x45, 0xc4, 0xc3,
-0xa2, 0x22, 0x0a, 0x82, 0x7b, 0xd0, 0xdc, 0x84,
-0xfc, 0x09, 0x33, 0x0b, 0x19, 0x48, 0x4e, 0x42,
-0x62, 0x6e, 0x21, 0x1b, 0xc8, 0xc5, 0xbb, 0x10,
-0x72, 0x90, 0xb5, 0xea, 0xbd, 0xfe, 0xf1, 0x7a,
-0xc7, 0x08, 0x7a, 0x88, 0x20, 0xf5, 0xbd, 0xec,
-0x97, 0xda, 0x37, 0x4d, 0x75, 0xbf, 0x9a, 0xea,
-0x4f, 0xf5, 0xcc, 0x1c, 0xa2, 0x9e, 0x65, 0xcd,
-0x2e, 0x32, 0x61, 0x66, 0x4c, 0x64, 0x2d, 0x4f,
-0x5f, 0x75, 0x17, 0x2c, 0x1f, 0xf6, 0x88, 0x0f,
-0x0d, 0x28, 0xfa, 0x9b, 0x68, 0x6e, 0x67, 0xc6,
-0xf2, 0x61, 0x7e, 0xbf, 0xa0, 0x33, 0x1f, 0xe7,
-0xc3, 0xf9, 0xd4, 0xa8, 0x3c, 0xa2, 0xf2, 0xf5,
-0x15, 0xb0, 0xd8, 0x89, 0xd8, 0x96, 0x9b, 0xf9,
-0x41, 0x39, 0x32, 0x28, 0xe5, 0x63, 0xf8, 0xad,
-0x0e, 0x6b, 0xd6, 0x78, 0x01, 0x9a, 0xe1, 0x57,
-0xa9, 0xb1, 0x11, 0x5d, 0xe4, 0x23, 0xc6, 0xf9,
-0x70, 0xdc, 0x14, 0xf5, 0x10, 0x8b, 0xb7, 0x1e,
-0x1f, 0x4f, 0xb3, 0x74, 0x7c, 0x27, 0x1f, 0x85,
-0x1b, 0xd9, 0x80, 0x2e, 0xa2, 0x7f, 0x6a, 0x02,
-0x34, 0xb8, 0x5f, 0x64, 0xe6, 0xd2, 0xc8, 0x42,
-0x9e, 0x4f, 0x4f, 0x11, 0x0d, 0xce, 0x26, 0x9f,
-0x85, 0xa2, 0x06, 0xab, 0x86, 0x0f, 0x05, 0x45,
-0xca, 0xa6, 0x28, 0x9f, 0x1e, 0x7d, 0xa5, 0x44,
-0x67, 0xf3, 0x86, 0xc6, 0x7a, 0x41, 0x3e, 0x14,
-0xf4, 0x95, 0x3b, 0x6b, 0xb4, 0x31, 0xe0, 0xe4,
-0x73, 0x09, 0x69, 0x50, 0x27, 0xad, 0x18, 0x2e,
-0x21, 0x28, 0xbe, 0x30, 0x58, 0x98, 0xf3, 0x61,
-0x66, 0x54, 0x71, 0x7f, 0x17, 0x4b, 0x72, 0xb5,
-0x3f, 0x9b, 0x9c, 0x09, 0x83, 0xd1, 0x7f, 0x1b,
-0xe7, 0xfa, 0x23, 0x76, 0xae, 0xea, 0x47, 0xc9,
-0x61, 0x4b, 0x83, 0x64, 0x76, 0x8d, 0xf0, 0x44,
-0x66, 0x8d, 0xa9, 0xa4, 0x91, 0x62, 0x7d, 0x8c,
-0x7c, 0xd8, 0x36, 0x58, 0x28, 0x46, 0xa9, 0x99,
-0x19, 0x89, 0xd5, 0xfe, 0x6d, 0x34, 0x17, 0x33,
-0x62, 0x9c, 0xd9, 0x74, 0xea, 0x67, 0x1a, 0xc7,
-0x4c, 0xe4, 0x43, 0x25, 0xd7, 0x45, 0xa2, 0x97,
-0xed, 0x58, 0x3a, 0x87, 0xdb, 0x34, 0xdd, 0xc3,
-0x08, 0xf5, 0x1f, 0xdf, 0xed, 0x3f, 0x0a, 0xcb,
-0xf5, 0x8a, 0x0e, 0x93, 0xda, 0x03, 0xf8, 0x01,
-0xcd, 0xde, 0xa4, 0x16, 0x0a, 0xe4, 0x43, 0xed,
-0x65, 0x26, 0x24, 0x53, 0xac, 0x87, 0x6e, 0x22,
-0xaf, 0xb7, 0xa6, 0xbc, 0xc5, 0x35, 0xd8, 0x90,
-0xc7, 0xc5, 0x3e, 0x1c, 0xd5, 0x82, 0x2d, 0x79,
-0x1d, 0xcd, 0x19, 0xc7, 0x38, 0xf5, 0x2c, 0xbe,
-0x40, 0x1a, 0xf4, 0xa2, 0x0a, 0xce, 0x0b, 0x58,
-0x2d, 0x7b, 0xb0, 0x5a, 0xb0, 0xed, 0x5c, 0x25,
-0x2c, 0xec, 0x89, 0x3b, 0x19, 0x28, 0x3a, 0xf9,
-0x60, 0xfd, 0x34, 0x4d, 0x91, 0xc0, 0x2d, 0xa2,
-0xc1, 0x8d, 0xa5, 0x12, 0x1f, 0xa6, 0xc6, 0xad,
-0x9f, 0x05, 0xa9, 0x86, 0x8d, 0x66, 0xd7, 0xf3,
-0x2b, 0x32, 0xee, 0xfb, 0x68, 0x82, 0x8a, 0x54,
-0xda, 0x6f, 0x76, 0x8c, 0xe9, 0x1b, 0x03, 0xce,
-0xf5, 0xc1, 0xf7, 0xcb, 0xa0, 0x11, 0x4d, 0x78,
-0xf0, 0x4b, 0x13, 0x06, 0x8d, 0x1f, 0x45, 0x5d,
-0x2c, 0x42, 0xac, 0x31, 0x82, 0xa6, 0x19, 0x0f,
-0x8c, 0x51, 0xce, 0xf5, 0xf1, 0xa8, 0xff, 0x10,
-0x1f, 0x82, 0xc2, 0x69, 0x14, 0x70, 0x3e, 0xf5,
-0xe4, 0x82, 0xb0, 0xa0, 0xa8, 0xc6, 0xf8, 0x10,
-0xf3, 0xd9, 0x3f, 0x4d, 0x7c, 0x88, 0xcd, 0x60,
-0x3f, 0x32, 0xd9, 0x7c, 0x0b, 0xf9, 0x10, 0x52,
-0x3e, 0xcc, 0x41, 0xd1, 0xc9, 0x47, 0xec, 0xe8,
-0x3f, 0xa5, 0xb6, 0x93, 0x1b, 0xe7, 0xfa, 0xa8,
-0xca, 0x55, 0x78, 0x08, 0x35, 0xfa, 0xe2, 0x40,
-0x32, 0xf1, 0x30, 0x6b, 0x3b, 0x1e, 0x99, 0xf5,
-0xbc, 0x23, 0x39, 0xf9, 0x24, 0xb8, 0x4d, 0x53,
-0xb8, 0x4d, 0x9a, 0xf6, 0x0b, 0x37, 0x4e, 0xfb,
-0x5b, 0x70, 0x5c, 0xdc, 0xc2, 0x48, 0xbc, 0x95,
-0xfe, 0xcb, 0xe9, 0x3f, 0x31, 0x9e, 0xe0, 0x09,
-0x35, 0xf5, 0x4d, 0xf5, 0x91, 0x7e, 0xba, 0x11,
-0xa9, 0xba, 0x5f, 0x95, 0x30, 0x84, 0x48, 0x79,
-0x64, 0x7e, 0x82, 0x34, 0xe2, 0xd4, 0x33, 0xbe,
-0x53, 0x8f, 0xa9, 0xc9, 0xb8, 0x1a, 0xcb, 0xfb,
-0xd0, 0x3e, 0x3d, 0xa9, 0xaa, 0x0d, 0x5c, 0xd6,
-0x06, 0x2f, 0x46, 0xf3, 0x02, 0xda, 0xaa, 0x4e,
-0x66, 0xd3, 0xc9, 0x67, 0x51, 0x5e, 0x19, 0x86,
-0xd1, 0x52, 0x08, 0xdf, 0xcb, 0x64, 0x80, 0xa6,
-0x1e, 0xa0, 0x19, 0x1a, 0x73, 0x37, 0x33, 0x6e,
-0xff, 0x51, 0xc4, 0x87, 0x83, 0x0a, 0x3d, 0xa7,
-0xdc, 0xf9, 0xd4, 0xd0, 0x89, 0x14, 0xd7, 0xa7,
-0xd7, 0x49, 0xf6, 0x84, 0xb5, 0x25, 0xa1, 0x75,
-0xe7, 0x6b, 0x1f, 0x41, 0xb1, 0x15, 0xdc, 0xcc,
-0xb0, 0xf0, 0x81, 0x1c, 0xe3, 0x43, 0xec, 0x3f,
-0x9d, 0x8b, 0xc1, 0x8c, 0xec, 0x9e, 0xf6, 0xfd,
-0x4e, 0xec, 0x37, 0x64, 0x57, 0x04, 0xca, 0x1a,
-0x08, 0x3a, 0x32, 0x0e, 0x6c, 0xc4, 0xa9, 0x1f,
-0x2a, 0xc0, 0xfc, 0xb9, 0x83, 0xbf, 0x36, 0x81,
-0x25, 0x09, 0xb6, 0x36, 0x45, 0x6e, 0x8a, 0x7a,
-0x00, 0x69, 0xb1, 0x50, 0x95, 0xf9, 0xb0, 0x9f,
-0x19, 0x1b, 0x71, 0xeb, 0x67, 0xa5, 0x7a, 0x41,
-0xdd, 0x7b, 0xde, 0x3a, 0xaa, 0x57, 0x2a, 0x55,
-0xf5, 0xdb, 0xf3, 0x83, 0x47, 0x27, 0x57, 0xc4,
-0x05, 0x34, 0xc7, 0xd0, 0x54, 0x53, 0xe3, 0xe4,
-0x23, 0x90, 0x07, 0x90, 0x0f, 0xf1, 0xa6, 0xff,
-0xf3, 0x1c, 0xdd, 0xfd, 0x2f, 0x37, 0x0b, 0x0c,
-0x78, 0x2b, 0x0f, 0x1c, 0xc9, 0xf8, 0x70, 0xf7,
-0xd9, 0xb3, 0xc4, 0x87, 0xcf, 0xae, 0x1d, 0x31,
-0x7c, 0xf8, 0xc4, 0xf0, 0xe1, 0xef, 0x64, 0x96,
-0x9d, 0xe5, 0x70, 0x2a, 0xe3, 0xc3, 0x93, 0x37,
-0xce, 0x13, 0x1f, 0x6e, 0xbf, 0x3e, 0x65, 0xc0,
-0xec, 0x95, 0xe5, 0xc3, 0x5f, 0xb7, 0x5f, 0x6d,
-0x97, 0x78, 0xec, 0x7d, 0x65, 0xb0, 0xf0, 0xe5,
-0x3a, 0x1e, 0xf6, 0xdf, 0x14, 0x14, 0xe7, 0x1e,
-0x2f, 0x93, 0x31, 0x7c, 0x68, 0x22, 0xdf, 0xba,
-0xeb, 0x0d, 0x16, 0xfe, 0xf3, 0x37, 0xa5, 0x91,
-0x81, 0xe2, 0x0d, 0x63, 0x2c, 0x1f, 0x52, 0xa4,
-0xc4, 0xab, 0x27, 0x33, 0x3e, 0x3c, 0xb0, 0xef,
-0xdc, 0x9f, 0x77, 0xda, 0xb4, 0xfe, 0xbb, 0x73,
-0xa3, 0xcf, 0xe9, 0x85, 0x39, 0x6a, 0x7e, 0x78,
-0xf6, 0x11, 0x8e, 0x58, 0xf8, 0xb6, 0xc6, 0xbf,
-0x8b, 0xf5, 0x0f, 0x3f, 0x0a, 0x8b, 0xc5, 0x62,
-0xb1, 0x58, 0x2c, 0x16, 0x8b, 0xc5, 0xfa, 0xd4,
-0x65, 0x66, 0x07, 0xc9, 0xb3, 0x03, 0x8b, 0xc5,
-0x62, 0xb1, 0x58, 0x2c, 0x16, 0x8b, 0xc5, 0x7a,
-0xb7, 0xcc, 0xec, 0x50, 0xe3, 0xd9, 0x81, 0xc5,
-0x62, 0xb1, 0x58, 0x2c, 0x16, 0x8b, 0xc5, 0x62,
-0xbd, 0x5b, 0x66, 0x76, 0xf0, 0xcc, 0xec, 0xf0,
-0xb1, 0x53, 0x61, 0xb1, 0x58, 0x2c, 0x16, 0x8b,
-0xc5, 0x62, 0xb1, 0x58, 0xff, 0xa3, 0x22, 0xfa,
-0x7d, 0x1c, 0x3c, 0xfb, 0x23, 0x02, 0x4d, 0xbf,
-0x5a, 0xa9, 0x46, 0xa0, 0xde, 0xfb, 0xf3, 0x84,
-0xf4, 0xb5, 0x13, 0x11, 0x6c, 0x88, 0xe2, 0x98,
-0x7f, 0x7d, 0xb9, 0x73, 0xdd, 0x1b, 0x3b, 0x1c,
-0x29, 0xc2, 0xf0, 0x33, 0x01, 0x00,
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
deleted file mode 100644
index 03bf9c8..0000000
--- a/board/esd/plu405/plu405.c
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-#include <malloc.h>
-#include <sja1000.h>
-
-#undef FPGA_DEBUG
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void lxt971_no_sleep(void);
-
-/* fpga configuration data - gzip compressed and generated by bin2c */
-const unsigned char fpgadata[] =
-{
-#include "fpgadata.c"
-};
-
-/*
- * include common fpga code (for esd boards)
- */
-#include "../common/fpga.c"
-
-/*
- * generate a short spike on the CAN tx line
- * to bring the couplers in sync
- */
-void init_coupler(u32 addr)
-{
-	struct sja1000_basic_s *ctrl = (struct sja1000_basic_s *)addr;
-
-	/* reset */
-	out_8(&ctrl->cr, CR_RR);
-
-	/* dominant */
-	out_8(&ctrl->btr0, 0x00); /* btr setup is required */
-	out_8(&ctrl->btr1, 0x14); /* we use 1Mbit/s */
-	out_8(&ctrl->oc, OC_TP1 | OC_TN1 | OC_POL1 |
-	      OC_TP0 | OC_TN0 | OC_POL0 | OC_MODE1);
-	out_8(&ctrl->cr, 0x00);
-
-	/* delay */
-	in_8(&ctrl->cr);
-	in_8(&ctrl->cr);
-	in_8(&ctrl->cr);
-	in_8(&ctrl->cr);
-
-	/* reset */
-	out_8(&ctrl->cr, CR_RR);
-}
-
-int board_early_init_f(void)
-{
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);       /* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(UIC0PR, 0xFFFFFF99);       /* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);       /* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);      /* set vect base=0,INT0 highest prio */
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-
-	/*
-	 * EBC Configuration Register: set ready timeout to
-	 * 512 ebc-clks -> ca. 15 us
-	 */
-	mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	unsigned char *dst;
-	unsigned char fctr;
-	ulong len = sizeof(fpgadata);
-	int status;
-	int index;
-	int i;
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
-	if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE,
-		   (uchar *)fpgadata, &len) != 0) {
-		printf("GUNZIP ERROR - must RESET board to recover\n");
-		do_reset(NULL, 0, 0, NULL);
-	}
-
-	status = fpga_boot(dst, len);
-	if (status != 0) {
-		printf("\nFPGA: Booting failed ");
-		switch (status) {
-		case ERROR_FPGA_PRG_INIT_LOW:
-			printf("(Timeout: INIT not low "
-			       "after asserting PROGRAM*)\n");
-			break;
-		case ERROR_FPGA_PRG_INIT_HIGH:
-			printf("(Timeout: INIT not high "
-			       "after deasserting PROGRAM*)\n");
-			break;
-		case ERROR_FPGA_PRG_DONE:
-			printf("(Timeout: DONE not high "
-			       "after programming FPGA)\n");
-			break;
-		}
-
-		/* display infos on fpgaimage */
-		index = 15;
-		for (i=0; i<4; i++) {
-			len = dst[index];
-			printf("FPGA: %s\n", &(dst[index+1]));
-			index += len+3;
-		}
-		putc ('\n');
-		/* delayed reboot */
-		for (i=20; i>0; i--) {
-			printf("Rebooting in %2d seconds \r",i);
-			for (index=0;index<1000;index++)
-				udelay(1000);
-		}
-		putc('\n');
-		do_reset(NULL, 0, 0, NULL);
-	}
-
-	puts("FPGA:  ");
-
-	/* display infos on fpgaimage */
-	index = 15;
-	for (i=0; i<4; i++) {
-		len = dst[index];
-		printf("%s ", &(dst[index+1]));
-		index += len+3;
-	}
-	putc('\n');
-
-	free(dst);
-
-	/*
-	 * Reset FPGA via FPGA_DATA pin
-	 */
-	SET_FPGA(FPGA_PRG | FPGA_CLK);
-	udelay(1000); /* wait 1ms */
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
-	udelay(1000); /* wait 1ms */
-
-	/*
-	 * Reset external DUARTs
-	 */
-	out_be32((void*)GPIO0_OR,
-		 in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST);
-	udelay(10);
-	out_be32((void*)GPIO0_OR,
-		 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
-	udelay(1000);
-
-	/*
-	 * Set NAND-FLASH GPIO signals to default
-	 */
-	out_be32((void*)GPIO0_OR,
-		 in_be32((void*)GPIO0_OR) &
-		 ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
-	out_be32((void*)GPIO0_OR,
-		 in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
-
-	/*
-	 * Setup EEPROM write protection
-	 */
-	out_be32((void*)GPIO0_OR,
-		 in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
-	out_be32((void*)GPIO0_TCR,
-		 in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
-
-	/*
-	 * Enable interrupts in exar duart mcr[3]
-	 */
-	out_8((void *)DUART0_BA + 4, 0x08);
-	out_8((void *)DUART1_BA + 4, 0x08);
-
-	/*
-	 * Enable auto RS485 mode in 2nd external uart
-	 */
-	out_8((void *)DUART1_BA + 3, 0xbf); /* write LCR */
-	fctr = in_8((void *)DUART1_BA + 1); /* read FCTR */
-	fctr |= 0x08;                       /* enable RS485 mode */
-	out_8((void *)DUART1_BA + 1, fctr); /* write FCTR */
-	out_8((void *)DUART1_BA + 3, 0);    /* write LCR */
-
-	/*
-	 * Init magnetic couplers
-	 */
-	if (!getenv("noinitcoupler")) {
-		init_coupler(CAN0_BA);
-		init_coupler(CAN1_BA);
-	}
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof(str));
-
-	puts("Board: ");
-
-	if (i == -1)
-		puts("### No HW ID - assuming PLU405");
-	else
-		puts(str);
-
-	putc('\n');
-	return 0;
-}
-
-#ifdef CONFIG_IDE_RESET
-#define FPGA_CTRL (CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL)
-void ide_set_reset(int on)
-{
-	/*
-	 * Assert or deassert CompactFlash Reset Pin
-	 */
-	if (on) {		/* assert RESET */
-		out_be16((void *)FPGA_CTRL,
-			 in_be16((void *)FPGA_CTRL) &
-			 ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
-	} else {		/* release RESET */
-		out_be16((void *)FPGA_CTRL,
-			 in_be16((void *)FPGA_CTRL) |
-			 CONFIG_SYS_FPGA_CTRL_CF_RESET);
-	}
-}
-#endif /* CONFIG_IDE_RESET */
-
-void reset_phy(void)
-{
-#ifdef CONFIG_LXT971_NO_SLEEP
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-#endif
-}
-
-#if defined(CONFIG_SYS_EEPROM_WREN)
-/* Input: <dev_addr>  I2C address of EEPROM device to enable.
- *	       <state> -1: deliver current state
- *			0: disable write
- *			1: enable write
- *  Returns:	       -1: wrong device address
- *			0: dis-/en- able done
- *		      0/1: current state if <state> was -1.
- */
-int eeprom_write_enable(unsigned dev_addr, int state)
-{
-	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
-		return -1;
-	} else {
-		switch (state) {
-		case 1:
-			/* Enable write access, clear bit GPIO0. */
-			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) &
-				 ~CONFIG_SYS_EEPROM_WP);
-			state = 0;
-			break;
-		case 0:
-			/* Disable write access, set bit GPIO0. */
-			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) |
-				 CONFIG_SYS_EEPROM_WP);
-			state = 0;
-			break;
-		default:
-			/* Read current status back. */
-			state = ((in_be32((void*)GPIO0_OR) &
-				       CONFIG_SYS_EEPROM_WP) == 0);
-			break;
-		}
-	}
-	return state;
-}
-
-int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int query = argc == 1;
-	int state = 0;
-
-	if (query) {
-		/* Query write access state. */
-		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
-		if (state < 0) {
-			puts("Query of write access state failed.\n");
-		} else {
-			printf("Write access for device 0x%0x is %sabled.\n",
-			       CONFIG_SYS_I2C_EEPROM_ADDR,
-			       state ? "en" : "dis");
-			state = 0;
-		}
-	} else {
-		if (argv[1][0] == '0') {
-			/* Disable write access. */
-			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR,
-						    0);
-		} else {
-			/* Enable write access. */
-			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR,
-						    1);
-		}
-		if (state < 0)
-			puts("Setup of write access state failed.\n");
-	}
-
-	return state;
-}
-
-U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
-	"Enable / disable / query EEPROM write access",
-	""
-);
-#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/pmc405de/Kconfig b/board/esd/pmc405de/Kconfig
deleted file mode 100644
index 4b05787..0000000
--- a/board/esd/pmc405de/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_PMC405DE
-
-config SYS_BOARD
-	default "pmc405de"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "PMC405DE"
-
-endif
diff --git a/board/esd/pmc405de/MAINTAINERS b/board/esd/pmc405de/MAINTAINERS
deleted file mode 100644
index a891e23..0000000
--- a/board/esd/pmc405de/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PMC405DE BOARD
-M:	Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S:	Maintained
-F:	board/esd/pmc405de/
-F:	include/configs/PMC405DE.h
-F:	configs/PMC405DE_defconfig
diff --git a/board/esd/pmc405de/Makefile b/board/esd/pmc405de/Makefile
deleted file mode 100644
index b3f6dcd..0000000
--- a/board/esd/pmc405de/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= pmc405de.o
-obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
-obj-y += ../common/cmd_loadpci.o
diff --git a/board/esd/pmc405de/chip_config.c b/board/esd/pmc405de/chip_config.c
deleted file mode 100644
index c06a6ae..0000000
--- a/board/esd/pmc405de/chip_config.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx_config.h>
-
-struct ppc4xx_config ppc4xx_config_val[] = {
-	{
-		"133",
-		"CPU: 133 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66",
-		{
-			0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x00, 0x40, 0x12, 0x12, 0x42, 0x3e, 0x00, 0x00
-		}
-	},
-	{
-		"266",
-		"CPU: 266 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66",
-		{
-			0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x00, 0x50, 0x22, 0x2d, 0x42, 0x3e, 0x00, 0x00
-		}
-	},
-	{
-		"333",
-		"CPU: 333 PLB: 111 OPB: 55 EBC: 55 PCI: 55/111",
-		{
-			0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x00, 0x60, 0x29, 0x2d, 0x42, 0xbe, 0x00, 0x00
-		}
-	},
-};
-
-int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/esd/pmc405de/pmc405de.c b/board/esd/pmc405de/pmc405de.c
deleted file mode 100644
index 31ac728..0000000
--- a/board/esd/pmc405de/pmc405de.c
+++ /dev/null
@@ -1,507 +0,0 @@
-/*
- * (C) Copyright 2009
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <console.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-#include <asm/4xx_pci.h>
-#include <command.h>
-#include <malloc.h>
-
-/*
- * PMC405-DE cpld registers
- * - all registers are 8 bit
- * - all registers are on 32 bit addesses
- */
-struct pmc405de_cpld {
-	/* cpld design version */
-	u8 version;
-	u8 reserved0[3];
-
-	/* misc. status lines */
-	u8 status;
-	u8 reserved1[3];
-
-	/*
-	 * gated control flags
-	 * gate bit(s) must be written with '1' to
-	 * access control flag
-	 */
-	u8 control;
-	u8 reserved2[3];
-};
-
-#define CPLD_VERSION_MASK		0x0f
-#define CPLD_CONTROL_POSTLED_N		0x01
-#define CPLD_CONTROL_POSTLED_GATE	0x02
-#define CPLD_CONTROL_RESETOUT_N		0x40
-#define CPLD_CONTROL_RESETOUT_N_GATE	0x80
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void __ft_board_setup(void *blob, bd_t *bd);
-extern void pll_write(u32 a, u32 b);
-
-static int wait_for_pci_ready_done;
-
-static int is_monarch(void);
-static int pci_is_66mhz(void);
-static int board_revision(void);
-static int cpld_revision(void);
-static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div);
-
-int board_early_init_f(void)
-{
-	u32 pllmr0, pllmr1;
-
-	/*
-	 * check M66EN and patch PLB:PCI divider for 66MHz PCI
-	 *
-	 * fCPU==333MHz && fPCI==66MHz (PLBDiv==3 && M66EN==1): PLB/PCI=1
-	 * fCPU==333MHz && fPCI==33MHz (PLBDiv==3 && M66EN==0): PLB/PCI=2
-	 * fCPU==133|266MHz && fPCI==66MHz (PLBDiv==1|2 && M66EN==1): PLB/PCI=2
-	 * fCPU==133|266MHz && fPCI==33MHz (PLBDiv==1|2 && M66EN==0): PLB/PCI=3
-	 *
-	 * calling upd_plb_pci_div() may end in calling pll_write() which will
-	 * do a chip reset and never return.
-	 */
-	pllmr0 = mfdcr(CPC0_PLLMR0);
-	pllmr1 = mfdcr(CPC0_PLLMR1);
-
-	if ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) == PLLMR0_CPU_PLB_DIV_3) {
-		/* fCPU=333MHz, fPLB=111MHz */
-		if (pci_is_66mhz())
-			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_1);
-		else
-			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2);
-	} else {
-		/* fCPU=133|266MHz, fPLB=133MHz */
-		if (pci_is_66mhz())
-			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2);
-		else
-			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_3);
-	}
-
-	/*
-	 * IRQ 25 (EXT IRQ 0) PCI-INTA#; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) PCI-INTB#; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) PCI-INTC#; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) PCI-INTD#; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) ETH0-PHY-IRQ#; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) ETH1-PHY-IRQ#; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) PLD-IRQ#; active low; level sensitive
-	 */
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);       /* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(UIC0PR, 0xFFFFFF80);       /* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);       /* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);      /* set vect base=0, INT0 highest prio */
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-
-	/*
-	 * EBC Configuration Register:
-	 * - set ready timeout to 512 ebc-clks -> ca. 15 us
-	 * - EBC lines are always driven
-	 */
-	mtebc(EBC0_CFG, 0xa8400000);
-
-	return 0;
-}
-
-static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div)
-{
-	if ((pllmr0 & PLLMR0_PCI_TO_PLB_MASK) != div)
-		pll_write((pllmr0 & ~PLLMR0_PCI_TO_PLB_MASK) | div, pllmr1);
-}
-
-int misc_init_r(void)
-{
-	int i;
-	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
-	struct pmc405de_cpld *cpld =
-		(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
-
-	if (!is_monarch()) {
-		/* PCI configuration done: release EREADY */
-		setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EREADY);
-		setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_EREADY);
-	}
-
-	/* turn off POST LED */
-	out_8(&cpld->control,
-	      CPLD_CONTROL_POSTLED_N | CPLD_CONTROL_POSTLED_GATE);
-
-	/* turn on LEDs: RUN, A, B */
-	clrbits_be32(&gpio0->or,
-		     CONFIG_SYS_GPIO_LEDRUN_N |
-		     CONFIG_SYS_GPIO_LEDA_N |
-		     CONFIG_SYS_GPIO_LEDB_N);
-
-	for (i=0; i < 200; i++)
-		udelay(1000);
-
-	/* turn off LEDs: A, B */
-	setbits_be32(&gpio0->or,
-		     CONFIG_SYS_GPIO_LEDA_N |
-		     CONFIG_SYS_GPIO_LEDB_N);
-
-	return (0);
-}
-
-static int is_monarch(void)
-{
-	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
-	return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_MONARCH_N) == 0;
-}
-
-static int pci_is_66mhz(void)
-{
-	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
-	return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_M66EN);
-}
-
-static int board_revision(void)
-{
-	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
-	return ((in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_HWREV_MASK) >>
-		CONFIG_SYS_GPIO_HWREV_SHIFT);
-}
-
-static int cpld_revision(void)
-{
-	struct pmc405de_cpld *cpld =
-		(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
-	return ((in_8(&cpld->version) & CPLD_VERSION_MASK));
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
-	puts("Board: esd GmbH - PMC-CPU/405-DE");
-
-	gd->board_type = board_revision();
-	printf(", Rev 1.%ld, ", gd->board_type);
-
-	if (!is_monarch())
-		puts("non-");
-
-	printf("monarch, PCI=%s MHz, PLD-Rev 1.%d\n",
-	       pci_is_66mhz() ? "66" : "33", cpld_revision());
-
-	return 0;
-}
-
-
-static void wait_for_pci_ready(void)
-{
-	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
-	int i;
-	char *s = getenv("pcidelay");
-
-	/* only wait once */
-	if (wait_for_pci_ready_done)
-		return;
-
-	/*
-	 * We have our own handling of the pcidelay variable.
-	 * Using CONFIG_PCI_BOOTDELAY enables pausing for host
-	 * and adapter devices. For adapter devices we do not
-	 * want this.
-	 */
-	if (s) {
-		int ms = simple_strtoul(s, NULL, 10);
-		printf("PCI:   Waiting for %d ms\n", ms);
-		for (i=0; i<ms; i++)
-			udelay(1000);
-	}
-
-	if (!(in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY)) {
-		printf("PCI:   Waiting for EREADY (CTRL-C to skip) ... ");
-		while (1) {
-			if (ctrlc()) {
-				puts("abort\n");
-				break;
-			}
-			if (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY) {
-				printf("done\n");
-				break;
-			}
-		}
-	}
-
-	wait_for_pci_ready_done = 1;
-}
-
-/*
- * Overwrite weak is_pci_host()
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
- */
-int is_pci_host(struct pci_controller *hose)
-{
-	char *s;
-
-	if (!is_monarch()) {
-		/*
-		 * Overwrite PCI identification when running in
-		 * non-monarch mode
-		 * This should be moved into pci_target_init()
-		 * when it is sometimes available for 405 CPUs
-		 */
-		pci_write_config_word(PCIDEVID_405GP,
-				      PCI_SUBSYSTEM_ID,
-				      CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
-		pci_write_config_word(PCIDEVID_405GP,
-				      PCI_CLASS_SUB_CODE,
-				      CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
-	}
-
-	s = getenv("pciscan");
-	if (s == NULL) {
-		if (is_monarch()) {
-			wait_for_pci_ready();
-			return 1;
-		} else {
-			return 0;
-		}
-	} else {
-		if (!strcmp(s, "yes"))
-			return 1;
-	}
-
-	return 0;
-}
-
-/*
- * Overwrite weak pci_pre_init()
- *
- * The default implementation enables the 405EP
- * internal PCI arbiter. We do not want that
- * on a PMC module.
- */
-int pci_pre_init(struct pci_controller *hose)
-{
-	return 1;
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	int rc;
-
-	__ft_board_setup(blob, bd);
-
-	/*
-	 * Disable PCI in non-monarch mode.
-	 */
-	if (!is_monarch()) {
-		rc = fdt_find_and_setprop(blob, "/plb/pci@ec000000", "status",
-					  "disabled", sizeof("disabled"), 1);
-		if (rc) {
-			printf("Unable to update property status in PCI node, "
-			       "err=%s\n",
-			       fdt_strerror(rc));
-		}
-	}
-
-	return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
-
-#if defined(CONFIG_SYS_EEPROM_WREN)
-/* Input: <dev_addr>  I2C address of EEPROM device to enable.
- *         <state>     -1: deliver current state
- *                      0: disable write
- *                      1: enable write
- * Returns:            -1: wrong device address
- *                      0: dis-/en- able done
- *                    0/1: current state if <state> was -1.
- */
-int eeprom_write_enable(unsigned dev_addr, int state)
-{
-	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
-
-	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
-		return -1;
-	} else {
-		switch (state) {
-		case 1:
-			/* Enable write access, clear bit GPIO0. */
-			clrbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP);
-			state = 0;
-			break;
-		case 0:
-			/* Disable write access, set bit GPIO0. */
-			setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP);
-			state = 0;
-			break;
-		default:
-			/* Read current status back. */
-			state = (0 == (in_be32(&gpio0->or) &
-				       CONFIG_SYS_GPIO_EEPROM_WP));
-			break;
-		}
-	}
-	return state;
-}
-
-int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int query = argc == 1;
-	int state = 0;
-
-	if (query) {
-		/* Query write access state. */
-		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, - 1);
-		if (state < 0) {
-			puts("Query of write access state failed.\n");
-		} else {
-			printf("Write access for device 0x%0x is %sabled.\n",
-				CONFIG_SYS_I2C_EEPROM_ADDR,
-				state ? "en" : "dis");
-			state = 0;
-		}
-	} else {
-		if ('0' == argv[1][0]) {
-			/* Disable write access. */
-			state = eeprom_write_enable(
-				CONFIG_SYS_I2C_EEPROM_ADDR, 0);
-		} else {
-			/* Enable write access. */
-			state = eeprom_write_enable(
-				CONFIG_SYS_I2C_EEPROM_ADDR, 1);
-		}
-		if (state < 0)
-			puts ("Setup of write access state failed.\n");
-	}
-
-	return state;
-}
-
-U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
-	"Enable / disable / query EEPROM write access",
-	""
-);
-#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
-
-#if defined(CONFIG_PRAM)
-#include <environment.h>
-
-int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	u32 pram, nextbase, base;
-	char *v;
-	u32 param;
-	ulong *lptr;
-
-	v = getenv("pram");
-	if (v)
-		pram = simple_strtoul(v, NULL, 10);
-	else {
-		printf("Error: pram undefined. Please define pram in KiB\n");
-		return 1;
-	}
-
-	base = gd->bd->bi_memsize;
-#if defined(CONFIG_LOGBUFFER)
-	base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
-#endif
-	/*
-	 * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MM_TOP_HIDE
-	 */
-	param = base - (pram << 10);
-	printf("PARAM: @%08x\n", param);
-	debug("memsize=0x%08x, base=0x%08x\n", (u32)gd->bd->bi_memsize, base);
-
-	/* clear entire PA ram */
-	memset((void*)param, 0, (pram << 10));
-
-	/* reserve 4k for pointer field */
-	nextbase = base - 4096;
-	lptr = (ulong*)(base);
-
-	/*
-	 * *(--lptr) = item_size;
-	 * *(--lptr) = base - item_base = distance from field top;
-	 */
-
-	/* env is first (4k aligned) */
-	nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
-	memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE);
-	*(--lptr) = CONFIG_ENV_SIZE;     /* size */
-	*(--lptr) = base - nextbase;  /* offset | type=0 */
-
-	/* free section */
-	*(--lptr) = nextbase - param; /* size */
-	*(--lptr) = (base - param) | 126; /* offset | type=126 */
-
-	/* terminate pointer field */
-	*(--lptr) = crc32(0, (void*)(base - 0x10), 0x10);
-	*(--lptr) = 0;                /* offset=0 -> terminator */
-	return 0;
-}
-U_BOOT_CMD(
-	painit,	1,	1,	do_painit,
-	"prepare PciAccess system",
-	""
-);
-#endif /* CONFIG_PRAM */
-
-int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
-	setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_SELFRST_N);
-	return 0;
-}
-U_BOOT_CMD(
-	selfreset,	1,	1,	do_selfreset,
-	"assert self-reset# signal",
-	""
-);
-
-int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	struct pmc405de_cpld *cpld =
-		(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
-
-	if (argc > 1) {
-		if (argv[1][0] == '0') {
-			/* assert */
-			printf("PMC-RESETOUT# asserted\n");
-			out_8(&cpld->control,
-			      CPLD_CONTROL_RESETOUT_N_GATE);
-		} else {
-			/* deassert */
-			printf("PMC-RESETOUT# deasserted\n");
-			out_8(&cpld->control,
-			      CPLD_CONTROL_RESETOUT_N |
-			      CPLD_CONTROL_RESETOUT_N_GATE);
-		}
-	} else {
-		printf("PMC-RESETOUT# is %s\n",
-		       (in_8(&cpld->control) & CPLD_CONTROL_RESETOUT_N) ?
-		       "inactive" : "active");
-	}
-	return 0;
-}
-U_BOOT_CMD(
-	resetout,	2,	1,	do_resetout,
-	"assert PMC-RESETOUT# signal",
-	""
-);
diff --git a/board/esd/pmc440/Kconfig b/board/esd/pmc440/Kconfig
deleted file mode 100644
index df8bd65..0000000
--- a/board/esd/pmc440/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_PMC440
-
-config SYS_BOARD
-	default "pmc440"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "PMC440"
-
-endif
diff --git a/board/esd/pmc440/MAINTAINERS b/board/esd/pmc440/MAINTAINERS
deleted file mode 100644
index 32fb9ba..0000000
--- a/board/esd/pmc440/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PMC440 BOARD
-M:	Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S:	Maintained
-F:	board/esd/pmc440/
-F:	include/configs/PMC440.h
-F:	configs/PMC440_defconfig
diff --git a/board/esd/pmc440/Makefile b/board/esd/pmc440/Makefile
deleted file mode 100644
index 708e9d1..0000000
--- a/board/esd/pmc440/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= pmc440.o cmd_pmc440.o sdram.o fpga.o \
-	../common/cmd_loadpci.o
-extra-y	+= init.o
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
deleted file mode 100644
index b7cd595..0000000
--- a/board/esd/pmc440/cmd_pmc440.c
+++ /dev/null
@@ -1,554 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <command.h>
-#include <console.h>
-#include <asm/io.h>
-#include <asm/cache.h>
-#include <asm/processor.h>
-#if defined(CONFIG_LOGBUFFER)
-#include <logbuff.h>
-#endif
-
-#include "pmc440.h"
-
-int is_monarch(void);
-int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
-			   uchar *buffer, unsigned cnt);
-int eeprom_write_enable(unsigned dev_addr, int state);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_BSP)
-
-static int got_fifoirq;
-static int got_hcirq;
-
-int fpga_interrupt(u32 arg)
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)arg;
-	int rc = -1; /* not for us */
-	u32 status = FPGA_IN32(&fpga->status);
-
-	/* check for interrupt from fifo module */
-	if (status & STATUS_FIFO_ISF) {
-		/* disable this int source */
-		FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
-		rc = 0;
-		got_fifoirq = 1; /* trigger backend */
-	}
-
-	if (status & STATUS_HOST_ISF) {
-		FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
-		rc = 0;
-		got_hcirq = 1;
-	}
-
-	return rc;
-}
-
-int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-
-	got_hcirq = 0;
-
-	FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
-	FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
-
-	irq_install_handler(IRQ0_FPGA,
-			    (interrupt_handler_t *)fpga_interrupt,
-			    fpga);
-
-	FPGA_SETBITS(&fpga->ctrla, CTRL_HOST_IE);
-
-	while (!got_hcirq) {
-		/* Abort if ctrl-c was pressed */
-		if (ctrlc()) {
-			puts("\nAbort\n");
-			break;
-		}
-	}
-	if (got_hcirq)
-		printf("Got interrupt!\n");
-
-	FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
-	irq_free_handler(IRQ0_FPGA);
-	return 0;
-}
-U_BOOT_CMD(
-	waithci,	1,	1,	do_waithci,
-	"Wait for host control interrupt",
-	""
-);
-
-void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
-{
-	u32 ctrl;
-
-	while (!((ctrl = FPGA_IN32(&fpga->fifo[f].ctrl)) & FIFO_EMPTY)) {
-		printf("%5d  %d    %3d  %08x",
-		       (*n)++, f, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
-		       FPGA_IN32(&fpga->fifo[f].data));
-		if (ctrl & FIFO_OVERFLOW) {
-			printf(" OVERFLOW\n");
-			FPGA_CLRBITS(&fpga->fifo[f].ctrl, FIFO_OVERFLOW);
-		} else
-			printf("\n");
-	}
-}
-
-int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-	int i;
-	int n = 0;
-	u32 ctrl, data, f;
-	char str[] = "\\|/-";
-	int abort = 0;
-	int count = 0;
-	int count2 = 0;
-
-	switch (argc) {
-	case 1:
-		/* print all fifos status information */
-		printf("fifo level status\n");
-		printf("______________________________\n");
-		for (i=0; i<FIFO_COUNT; i++) {
-			ctrl = FPGA_IN32(&fpga->fifo[i].ctrl);
-			printf(" %d    %3d  %s%s%s %s\n",
-			       i, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
-			       ctrl & FIFO_FULL ? "FULL     " : "",
-			       ctrl & FIFO_EMPTY ? "EMPTY    " : "",
-			       ctrl & (FIFO_FULL|FIFO_EMPTY) ? "" : "NOT EMPTY",
-			       ctrl & FIFO_OVERFLOW ? "OVERFLOW" : "");
-		}
-		break;
-
-	case 2:
-		/* completely read out fifo 'n' */
-		if (!strcmp(argv[1],"read")) {
-			printf("  #   fifo level data\n");
-			printf("______________________________\n");
-
-			for (i=0; i<FIFO_COUNT; i++)
-				dump_fifo(fpga, i, &n);
-
-		} else if (!strcmp(argv[1],"wait")) {
-			got_fifoirq = 0;
-
-			irq_install_handler(IRQ0_FPGA,
-					    (interrupt_handler_t *)fpga_interrupt,
-					    fpga);
-
-			printf("  #   fifo level data\n");
-			printf("______________________________\n");
-
-			/* enable all fifo interrupts */
-			FPGA_OUT32(&fpga->hostctrl,
-				   HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG);
-			for (i=0; i<FIFO_COUNT; i++) {
-				/* enable interrupts from all fifos */
-				FPGA_SETBITS(&fpga->fifo[i].ctrl, FIFO_IE);
-			}
-
-			while (1) {
-				/* wait loop */
-				while (!got_fifoirq) {
-					count++;
-					if (!(count % 100)) {
-						count2++;
-						putc(0x08); /* backspace */
-						putc(str[count2 % 4]);
-					}
-
-					/* Abort if ctrl-c was pressed */
-					if ((abort = ctrlc())) {
-						puts("\nAbort\n");
-						break;
-					}
-					udelay(1000);
-				}
-				if (abort)
-					break;
-
-				/* simple fifo backend */
-				if (got_fifoirq) {
-					for (i=0; i<FIFO_COUNT; i++)
-						dump_fifo(fpga, i, &n);
-
-					got_fifoirq = 0;
-					/* unmask global fifo irq */
-					FPGA_OUT32(&fpga->hostctrl,
-						   HOSTCTRL_FIFOIE_GATE |
-						   HOSTCTRL_FIFOIE_FLAG);
-				}
-			}
-
-			/* disable all fifo interrupts */
-			FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
-			for (i=0; i<FIFO_COUNT; i++)
-				FPGA_CLRBITS(&fpga->fifo[i].ctrl, FIFO_IE);
-
-			irq_free_handler(IRQ0_FPGA);
-
-		} else {
-			printf("Usage:\nfifo %s\n", cmdtp->help);
-			return 1;
-		}
-		break;
-
-	case 4:
-	case 5:
-		if (!strcmp(argv[1],"write")) {
-			/* get fifo number or fifo address */
-			f = simple_strtoul(argv[2], NULL, 16);
-
-			/* data paramter */
-			data = simple_strtoul(argv[3], NULL, 16);
-
-			/* get optional count parameter */
-			n = 1;
-			if (argc >= 5)
-				n = (int)simple_strtoul(argv[4], NULL, 10);
-
-			if (f < FIFO_COUNT) {
-				printf("writing %d x %08x to fifo %d\n",
-				       n, data, f);
-				for (i=0; i<n; i++)
-					FPGA_OUT32(&fpga->fifo[f].data, data);
-			} else {
-				printf("writing %d x %08x to fifo port at "
-				       "address %08x\n",
-				       n, data, f);
-				for (i=0; i<n; i++)
-					out_be32((void *)f, data);
-			}
-		} else {
-			printf("Usage:\nfifo %s\n", cmdtp->help);
-			return 1;
-		}
-		break;
-
-	default:
-		printf("Usage:\nfifo %s\n", cmdtp->help);
-		return 1;
-	}
-	return 0;
-}
-U_BOOT_CMD(
-	fifo,	5,	1,	do_fifo,
-	"Fifo module operations",
-	"wait\nfifo read\n"
-	"fifo write fifo(0..3) data [cnt=1]\n"
-	"fifo write address(>=4) data [cnt=1]\n"
-	"  - without arguments: print all fifo's status\n"
-	"  - with 'wait' argument: interrupt driven read from all fifos\n"
-	"  - with 'read' argument: read current contents from all fifos\n"
-	"  - with 'write' argument: write 'data' 'cnt' times to "
-	"'fifo' or 'address'"
-);
-
-int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	ulong sdsdp[5];
-	ulong delay;
-	int count=16;
-
-	if (argc < 2) {
-		printf("Usage:\nsbe %s\n", cmdtp->help);
-		return -1;
-	}
-
-	if (argc > 1) {
-		if (!strcmp(argv[1], "400")) {
-			/* PLB=133MHz, PLB/PCI=3 */
-			printf("Bootstrapping for 400MHz\n");
-			sdsdp[0]=0x8678624e;
-			sdsdp[1]=0x095fa030;
-			sdsdp[2]=0x40082350;
-			sdsdp[3]=0x0d050000;
-		} else if (!strcmp(argv[1], "533")) {
-			/* PLB=133MHz, PLB/PCI=3 */
-			printf("Bootstrapping for 533MHz\n");
-			sdsdp[0]=0x87788252;
-			sdsdp[1]=0x095fa030;
-			sdsdp[2]=0x40082350;
-			sdsdp[3]=0x0d050000;
-		} else if (!strcmp(argv[1], "667")) {
-			/* PLB=133MHz, PLB/PCI=3 */
-			printf("Bootstrapping for 667MHz\n");
-			sdsdp[0]=0x8778a256;
-			sdsdp[1]=0x095fa030;
-			sdsdp[2]=0x40082350;
-			sdsdp[3]=0x0d050000;
-		} else {
-			printf("Usage:\nsbe %s\n", cmdtp->help);
-			return -1;
-		}
-	}
-
-	if (argc > 2) {
-		sdsdp[4] = 0;
-		if (argv[2][0]=='1')
-			sdsdp[4]=0x19750100;
-		else if (argv[2][0]=='0')
-			sdsdp[4]=0x19750000;
-		if (sdsdp[4])
-			count += 4;
-	}
-
-	if (argc > 3) {
-		delay = simple_strtoul(argv[3], NULL, 10);
-		if (delay > 20)
-			delay = 20;
-		sdsdp[4] |= delay;
-	}
-
-	printf("Writing boot EEPROM ...\n");
-	if (bootstrap_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
-				   0, (uchar*)sdsdp, count) != 0)
-		printf("bootstrap_eeprom_write failed\n");
-	else
-		printf("done (dump via 'i2c md 52 0.1 14')\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	sbe, 4, 0, do_setup_bootstrap_eeprom,
-	"setup bootstrap eeprom",
-	"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
-);
-
-#if defined(CONFIG_PRAM)
-#include <environment.h>
-#include <search.h>
-#include <errno.h>
-
-int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	u32 pram, nextbase, base;
-	char *v;
-	u32 param;
-	ulong *lptr;
-
-	env_t *envp;
-	char *res;
-	int len;
-
-	v = getenv("pram");
-	if (v)
-		pram = simple_strtoul(v, NULL, 10);
-	else {
-		printf("Error: pram undefined. Please define pram in KiB\n");
-		return 1;
-	}
-
-	base = (u32)gd->ram_size;
-#if defined(CONFIG_LOGBUFFER)
-	base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
-#endif
-	/*
-	 * gd->ram_size == physical ram size - CONFIG_SYS_MEM_TOP_HIDE
-	 */
-	param = base - (pram << 10);
-	printf("PARAM: @%08x\n", param);
-	debug("memsize=0x%08x, base=0x%08x\n", (u32)gd->ram_size, base);
-
-	/* clear entire PA ram */
-	memset((void*)param, 0, (pram << 10));
-
-	/* reserve 4k for pointer field */
-	nextbase = base - 4096;
-	lptr = (ulong*)(base);
-
-	/*
-	 * *(--lptr) = item_size;
-	 * *(--lptr) = base - item_base = distance from field top;
-	 */
-
-	/* env is first (4k aligned) */
-	nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
-	envp = (env_t *)nextbase;
-	res = (char *)envp->data;
-	len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL);
-	if (len < 0) {
-		error("Cannot export environment: errno = %d\n", errno);
-		return 1;
-	}
-	envp->crc = crc32(0, envp->data, ENV_SIZE);
-
-	*(--lptr) = CONFIG_ENV_SIZE;     /* size */
-	*(--lptr) = base - nextbase;  /* offset | type=0 */
-
-	/* free section */
-	*(--lptr) = nextbase - param; /* size */
-	*(--lptr) = (base - param) | 126; /* offset | type=126 */
-
-	/* terminate pointer field */
-	*(--lptr) = crc32(0, (void*)(base - 0x10), 0x10);
-	*(--lptr) = 0;                /* offset=0 -> terminator */
-	return 0;
-}
-U_BOOT_CMD(
-	painit,	1,	1,	do_painit,
-	"prepare PciAccess system",
-	""
-);
-#endif /* CONFIG_PRAM */
-
-int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	in_be32((void*)CONFIG_SYS_RESET_BASE);
-	return 0;
-}
-U_BOOT_CMD(
-	selfreset,	1,	1,	do_selfreset,
-	"assert self-reset# signal",
-	""
-);
-
-int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-
-	/* requiers bootet FPGA and PLD_IOEN_N active */
-	if (in_be32((void*)GPIO1_OR) & GPIO1_IOEN_N) {
-		printf("Error: resetout requires a bootet FPGA\n");
-		return -1;
-	}
-
-	if (argc > 1) {
-		if (argv[1][0] == '0') {
-			/* assert */
-			printf("PMC-RESETOUT# asserted\n");
-			FPGA_OUT32(&fpga->hostctrl,
-				   HOSTCTRL_PMCRSTOUT_GATE);
-		} else {
-			/* deassert */
-			printf("PMC-RESETOUT# deasserted\n");
-			FPGA_OUT32(&fpga->hostctrl,
-				   HOSTCTRL_PMCRSTOUT_GATE |
-				   HOSTCTRL_PMCRSTOUT_FLAG);
-		}
-	} else {
-		printf("PMC-RESETOUT# is %s\n",
-		       FPGA_IN32(&fpga->hostctrl) & HOSTCTRL_PMCRSTOUT_FLAG ?
-		       "inactive" : "active");
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	resetout,	2,	1,	do_resetout,
-	"assert PMC-RESETOUT# signal",
-	""
-);
-
-int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	if (is_monarch()) {
-		printf("This command is only supported in non-monarch mode\n");
-		return -1;
-	}
-
-	if (argc > 1) {
-		if (argv[1][0] == '0') {
-			/* assert */
-			printf("inta# asserted\n");
-			out_be32((void*)GPIO1_TCR,
-				 in_be32((void*)GPIO1_TCR) | GPIO1_INTA_FAKE);
-		} else {
-			/* deassert */
-			printf("inta# deasserted\n");
-			out_be32((void*)GPIO1_TCR,
-				 in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE);
-		}
-	} else {
-		printf("inta# is %s\n",
-		       in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ?
-		       "active" : "inactive");
-	}
-	return 0;
-}
-U_BOOT_CMD(
-	inta,	2,	1,	do_inta,
-	"Assert/Deassert or query INTA# state in non-monarch mode",
-	""
-);
-
-/* test-only */
-int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	ulong pciaddr;
-
-	if (argc > 1) {
-		pciaddr = simple_strtoul(argv[1], NULL, 16);
-
-		pciaddr &= 0xf0000000;
-
-		/* map PCI address at 0xc0000000 in PLB space */
-
-		/* PMM1 Mask/Attribute - disabled b4 setting */
-		out32r(PCIL0_PMM1MA, 0x00000000);
-		/* PMM1 Local Address */
-		out32r(PCIL0_PMM1LA, 0xc0000000);
-		/* PMM1 PCI Low Address */
-		out32r(PCIL0_PMM1PCILA, pciaddr);
-		/* PMM1 PCI High Address */
-		out32r(PCIL0_PMM1PCIHA, 0x00000000);
-		/* 256MB + No prefetching, and enable region */
-		out32r(PCIL0_PMM1MA, 0xf0000001);
-	} else {
-		printf("Usage:\npmm %s\n", cmdtp->help);
-	}
-	return 0;
-}
-U_BOOT_CMD(
-	pmm,	2,	1,	do_pmm,
-	"Setup pmm[1] registers",
-	"<pciaddr> (pciaddr will be aligned to 256MB)"
-);
-
-#if defined(CONFIG_SYS_EEPROM_WREN)
-int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int query = argc == 1;
-	int state = 0;
-
-	if (query) {
-		/* Query write access state. */
-		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
-		if (state < 0) {
-			puts("Query of write access state failed.\n");
-		} else {
-			printf("Write access for device 0x%0x is %sabled.\n",
-			       CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
-			state = 0;
-		}
-	} else {
-		if ('0' == argv[1][0]) {
-			/* Disable write access. */
-			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0);
-		} else {
-			/* Enable write access. */
-			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1);
-		}
-		if (state < 0) {
-			puts("Setup of write access state failed.\n");
-		}
-	}
-
-	return state;
-}
-U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
-	"Enable / disable / query EEPROM write access",
-	""
-);
-#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
-
-#endif /* CONFIG_CMD_BSP */
diff --git a/board/esd/pmc440/config.mk b/board/esd/pmc440/config.mk
deleted file mode 100644
index 9cb071e..0000000
--- a/board/esd/pmc440/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2002-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/esd/pmc440/fpga.c b/board/esd/pmc440/fpga.c
deleted file mode 100644
index f876da8..0000000
--- a/board/esd/pmc440/fpga.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/*
- * (C) Copyright 2007
- * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <spartan2.h>
-#include <spartan3.h>
-#include <command.h>
-#include "fpga.h"
-#include "pmc440.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_FPGA)
-
-#define USE_SP_CODE
-
-#ifdef USE_SP_CODE
-xilinx_spartan3_slave_parallel_fns pmc440_fpga_fns = {
-	fpga_pre_config_fn,
-	fpga_pgm_fn,
-	fpga_init_fn,
-	NULL, /* err */
-	fpga_done_fn,
-	fpga_clk_fn,
-	fpga_cs_fn,
-	fpga_wr_fn,
-	NULL, /* rdata */
-	fpga_wdata_fn,
-	fpga_busy_fn,
-	fpga_abort_fn,
-	fpga_post_config_fn,
-};
-#else
-xilinx_spartan3_slave_serial_fns pmc440_fpga_fns = {
-	fpga_pre_config_fn,
-	fpga_pgm_fn,
-	fpga_clk_fn,
-	fpga_init_fn,
-	fpga_done_fn,
-	fpga_wr_fn,
-	fpga_post_config_fn,
-};
-#endif
-
-xilinx_spartan2_slave_serial_fns ngcc_fpga_fns = {
-	ngcc_fpga_pre_config_fn,
-	ngcc_fpga_pgm_fn,
-	ngcc_fpga_clk_fn,
-	ngcc_fpga_init_fn,
-	ngcc_fpga_done_fn,
-	ngcc_fpga_wr_fn,
-	ngcc_fpga_post_config_fn
-};
-
-xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
-	XILINX_XC3S1200E_DESC(
-#ifdef USE_SP_CODE
-		slave_parallel,
-#else
-		slave_serial,
-#endif
-		(void *)&pmc440_fpga_fns,
-		0),
-	XILINX_XC2S200_DESC(
-		slave_serial,
-		(void *)&ngcc_fpga_fns,
-		0)
-};
-
-
-/*
- * Set the active-low FPGA reset signal.
- */
-void fpga_reset(int assert)
-{
-	debug("%s:%d: RESET ", __FUNCTION__, __LINE__);
-	if (assert) {
-		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_DATA);
-		debug("asserted\n");
-	} else {
-		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_DATA);
-		debug("deasserted\n");
-	}
-}
-
-
-/*
- * Initialize the SelectMap interface.  We assume that the mode and the
- * initial state of all of the port pins have already been set!
- */
-void fpga_serialslave_init(void)
-{
-	debug("%s:%d: Initialize serial slave interface\n", __FUNCTION__,
-	      __LINE__);
-	fpga_pgm_fn(false, false, 0);	/* make sure program pin is inactive */
-}
-
-
-/*
- * Set the FPGA's active-low SelectMap program line to the specified level
- */
-int fpga_pgm_fn(int assert, int flush, int cookie)
-{
-	debug("%s:%d: FPGA PROGRAM ",
-	      __FUNCTION__, __LINE__);
-
-	if (assert) {
-		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_PRG);
-		debug("asserted\n");
-	} else {
-		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_PRG);
-		debug("deasserted\n");
-	}
-	return assert;
-}
-
-
-/*
- * Test the state of the active-low FPGA INIT line.  Return 1 on INIT
- * asserted (low).
- */
-int fpga_init_fn(int cookie)
-{
-	if (in_be32((void*)GPIO1_IR) & GPIO1_FPGA_INIT)
-		return 0;
-	else
-		return 1;
-}
-
-#ifdef USE_SP_CODE
-int fpga_abort_fn(int cookie)
-{
-	return 0;
-}
-
-
-int fpga_cs_fn(int assert_cs, int flush, int cookie)
-{
-	return assert_cs;
-}
-
-
-int fpga_busy_fn(int cookie)
-{
-	return 1;
-}
-#endif
-
-
-/*
- * Test the state of the active-high FPGA DONE pin
- */
-int fpga_done_fn(int cookie)
-{
-	if (in_be32((void*)GPIO1_IR) & GPIO1_FPGA_DONE)
-		return 1;
-	else
-		return 0;
-}
-
-
-/*
- * FPGA pre-configuration function. Just make sure that
- * FPGA reset is asserted to keep the FPGA from starting up after
- * configuration.
- */
-int fpga_pre_config_fn(int cookie)
-{
-	debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
-	fpga_reset(true);
-
-	/* release init# */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | GPIO0_FPGA_FORCEINIT);
-	/* disable PLD IOs */
-	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_IOEN_N);
-	return 0;
-}
-
-
-/*
- * FPGA post configuration function. Blip the FPGA reset line and then see if
- * the FPGA appears to be running.
- */
-int fpga_post_config_fn(int cookie)
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-	int rc=0;
-	char *s;
-
-	debug("%s:%d: FPGA post configuration\n", __FUNCTION__, __LINE__);
-
-	/* enable PLD0..7 pins */
-	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_IOEN_N);
-
-	fpga_reset(true);
-	udelay (100);
-	fpga_reset(false);
-	udelay (100);
-
-	FPGA_OUT32(&fpga->status, (gd->board_type << STATUS_HWREV_SHIFT) & STATUS_HWREV_MASK);
-
-	/* NGCC/CANDES only: enable ledlink */
-	if ((s = getenv("bd_type")) &&
-	    ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes"))))
-		FPGA_SETBITS(&fpga->ctrla, 0x29f8c000);
-
-	return rc;
-}
-
-
-int fpga_clk_fn(int assert_clk, int flush, int cookie)
-{
-	if (assert_clk)
-		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_CLK);
-	else
-		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_CLK);
-
-	return assert_clk;
-}
-
-
-int fpga_wr_fn(int assert_write, int flush, int cookie)
-{
-	if (assert_write)
-		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_DATA);
-	else
-		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_DATA);
-
-	return assert_write;
-}
-
-#ifdef USE_SP_CODE
-int fpga_wdata_fn(uchar data, int flush, int cookie)
-{
-	uchar val = data;
-	ulong or = in_be32((void*)GPIO1_OR);
-	int i = 7;
-	do {
-		/* Write data */
-		if (val & 0x80)
-			or = (or & ~GPIO1_FPGA_CLK) | GPIO1_FPGA_DATA;
-		else
-			or = or & ~(GPIO1_FPGA_CLK | GPIO1_FPGA_DATA);
-
-		out_be32((void*)GPIO1_OR, or);
-
-		/* Assert the clock */
-		or |= GPIO1_FPGA_CLK;
-		out_be32((void*)GPIO1_OR, or);
-		val <<= 1;
-		i --;
-	} while (i > 0);
-
-	/* Write last data bit (the 8th clock comes from the sp_load() code */
-	if (val & 0x80)
-		or = (or & ~GPIO1_FPGA_CLK) | GPIO1_FPGA_DATA;
-	else
-		or = or & ~(GPIO1_FPGA_CLK | GPIO1_FPGA_DATA);
-
-	out_be32((void*)GPIO1_OR, or);
-
-	return 0;
-}
-#endif
-
-#define NGCC_FPGA_PRG  CLOCK_EN
-#define NGCC_FPGA_DATA RESET_OUT
-#define NGCC_FPGA_DONE CLOCK_IN
-#define NGCC_FPGA_INIT IRIGB_R_IN
-#define NGCC_FPGA_CLK  CLOCK_OUT
-
-void ngcc_fpga_serialslave_init(void)
-{
-	debug("%s:%d: Initialize serial slave interface\n",
-	      __FUNCTION__, __LINE__);
-
-	/* make sure program pin is inactive */
-	ngcc_fpga_pgm_fn(false, false, 0);
-}
-
-/*
- * Set the active-low FPGA reset signal.
- */
-void ngcc_fpga_reset(int assert)
-{
-	debug("%s:%d: RESET ", __FUNCTION__, __LINE__);
-
-	if (assert) {
-		FPGA_CLRBITS(NGCC_CTRL_BASE, NGCC_CTRL_FPGARST_N);
-		debug("asserted\n");
-	} else {
-		FPGA_SETBITS(NGCC_CTRL_BASE, NGCC_CTRL_FPGARST_N);
-		debug("deasserted\n");
-	}
-}
-
-
-/*
- * Set the FPGA's active-low SelectMap program line to the specified level
- */
-int ngcc_fpga_pgm_fn(int assert, int flush, int cookie)
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-
-	debug("%s:%d: FPGA PROGRAM ", __FUNCTION__, __LINE__);
-
-	if (assert) {
-		FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_PRG);
-		debug("asserted\n");
-	} else {
-		FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_PRG);
-		debug("deasserted\n");
-	}
-
-	return assert;
-}
-
-
-/*
- * Test the state of the active-low FPGA INIT line.  Return 1 on INIT
- * asserted (low).
- */
-int ngcc_fpga_init_fn(int cookie)
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-
-	debug("%s:%d: INIT check... ", __FUNCTION__, __LINE__);
-	if (FPGA_IN32(&fpga->status) & NGCC_FPGA_INIT) {
-		debug("high\n");
-		return 0;
-	} else {
-		debug("low\n");
-		return 1;
-	}
-}
-
-
-/*
- * Test the state of the active-high FPGA DONE pin
- */
-int ngcc_fpga_done_fn(int cookie)
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-
-	debug("%s:%d: DONE check... ", __FUNCTION__, __LINE__);
-	if (FPGA_IN32(&fpga->status) & NGCC_FPGA_DONE) {
-		debug("DONE high\n");
-		return 1;
-	} else {
-		debug("low\n");
-		return 0;
-	}
-}
-
-
-/*
- * FPGA pre-configuration function.
- */
-int ngcc_fpga_pre_config_fn(int cookie)
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-	debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
-
-	ngcc_fpga_reset(true);
-	FPGA_CLRBITS(&fpga->ctrla, 0xfffffe00);
-
-	ngcc_fpga_reset(true);
-	return 0;
-}
-
-
-/*
- * FPGA post configuration function. Blip the FPGA reset line and then see if
- * the FPGA appears to be running.
- */
-int ngcc_fpga_post_config_fn(int cookie)
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-
-	debug("%s:%d: NGCC FPGA post configuration\n", __FUNCTION__, __LINE__);
-
-	udelay (100);
-	ngcc_fpga_reset(false);
-
-	FPGA_SETBITS(&fpga->ctrla, 0x29f8c000);
-
-	return 0;
-}
-
-
-int ngcc_fpga_clk_fn(int assert_clk, int flush, int cookie)
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-
-	if (assert_clk)
-		FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_CLK);
-	else
-		FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_CLK);
-
-	return assert_clk;
-}
-
-
-int ngcc_fpga_wr_fn(int assert_write, int flush, int cookie)
-{
-	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
-
-	if (assert_write)
-		FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_DATA);
-	else
-		FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_DATA);
-
-	return assert_write;
-}
-
-
-/*
- * Initialize the fpga.  Return 1 on success, 0 on failure.
- */
-int pmc440_init_fpga(void)
-{
-	char *s;
-
-	debug("%s:%d: Initialize FPGA interface\n",
-	      __FUNCTION__, __LINE__);
-	fpga_init();
-
-	fpga_serialslave_init ();
-	debug("%s:%d: Adding fpga 0\n", __FUNCTION__, __LINE__);
-	fpga_add (fpga_xilinx, &fpga[0]);
-
-	/* NGCC only */
-	if ((s = getenv("bd_type")) && !strcmp(s, "ngcc")) {
-		ngcc_fpga_serialslave_init ();
-		debug("%s:%d: Adding fpga 1\n", __FUNCTION__, __LINE__);
-		fpga_add (fpga_xilinx, &fpga[1]);
-	}
-
-	return 0;
-}
-#endif /* CONFIG_FPGA */
diff --git a/board/esd/pmc440/fpga.h b/board/esd/pmc440/fpga.h
deleted file mode 100644
index 3810788..0000000
--- a/board/esd/pmc440/fpga.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * (C) Copyright 2007
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-extern int pmc440_init_fpga(void);
-
-extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
-extern int fpga_init_fn(int cookie);
-extern int fpga_err_fn(int cookie);
-extern int fpga_done_fn(int cookie);
-extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
-extern int fpga_cs_fn(int assert_cs, int flush, int cookie);
-extern int fpga_wr_fn(int assert_write, int flush, int cookie);
-extern int fpga_wdata_fn (uchar data, int flush, int cookie);
-extern int fpga_read_data_fn(unsigned char *data, int cookie);
-extern int fpga_write_data_fn(unsigned char data, int flush, int cookie);
-extern int fpga_busy_fn(int cookie);
-extern int fpga_abort_fn(int cookie );
-extern int fpga_pre_config_fn(int cookie );
-extern int fpga_post_config_fn(int cookie );
-
-extern int ngcc_fpga_pgm_fn(int assert_pgm, int flush, int cookie);
-extern int ngcc_fpga_init_fn(int cookie);
-extern int ngcc_fpga_done_fn(int cookie);
-extern int ngcc_fpga_clk_fn(int assert_clk, int flush, int cookie);
-extern int ngcc_fpga_wr_fn(int assert_write, int flush, int cookie);
-extern int ngcc_fpga_pre_config_fn(int cookie );
-extern int ngcc_fpga_post_config_fn(int cookie );
diff --git a/board/esd/pmc440/init.S b/board/esd/pmc440/init.S
deleted file mode 100644
index 1f26fad..0000000
--- a/board/esd/pmc440/init.S
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <ppc_asm.tmpl>
-#include <asm/mmu.h>
-#include <config.h>
-
-/*
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- */
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G )
-
-	/* TLB entries for DDR2 SDRAM are generated dynamically */
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
-	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G )
-#endif
-
-	/* TLB-entry for PCI Memory */
-	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_RW | SA_IG )
-	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_RW | SA_IG )
-	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_RW | SA_IG )
-	tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_RW | SA_IG )
-
-	/* TLB-entries for EBC */
-	/* PMC440 maps EBC to 0xef000000 which is handled by the peripheral
-	 * tlb entry.
-	 * This dummy entry is only for convinience in order not to modify the
-	 * amount of entries. Currently OS/9 relies on this :-)
-	 */
-	tlbentry( 0xc0000000, SZ_256M, 0xc0000000, 1, AC_RWX | SA_IG )
-
-	/* TLB-entry for NAND */
-	tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_RWX | SA_IG )
-
-	/* TLB-entry for Internal Registers & OCM */
-	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_RWX | SA_I )
-
-	/*TLB-entry PCI registers*/
-	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_RWX | SA_IG )
-
-	/* TLB-entry for peripherals */
-	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_RWX | SA_IG)
-
-	/* TLB-entry PCI IO space */
-	tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_RWX | SA_IG)
-
-	/* TODO:  what about high IO space */
-	tlbtab_end
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
deleted file mode 100644
index 0d43505..0000000
--- a/board/esd/pmc440/pmc440.c
+++ /dev/null
@@ -1,906 +0,0 @@
-/*
- * (Cg) Copyright 2007-2008
- * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
- * Based on board/amcc/sequoia/sequoia.c
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <console.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/ppc440.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/bitops.h>
-#include <command.h>
-#include <i2c.h>
-#ifdef CONFIG_RESET_PHY_R
-#include <miiphy.h>
-#endif
-#include <serial.h>
-#include <asm/4xx_pci.h>
-#include <usb.h>
-
-#include "fpga.h"
-#include "pmc440.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-extern void __ft_board_setup(void *blob, bd_t *bd);
-
-ulong flash_get_size(ulong base, int banknum);
-static int pci_is_66mhz(void);
-int is_monarch(void);
-static int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
-				 uchar *buffer, unsigned cnt);
-
-struct serial_device *default_serial_console(void)
-{
-	uchar buf[4];
-	ulong delay;
-	int i;
-	ulong val;
-
-	/*
-	 * Use default console on P4 when strapping jumper
-	 * is installed (bootstrap option != 'H').
-	 */
-	mfsdr(SDR0_PINSTP, val);
-	if (((val & 0xf0000000) >> 29) != 7)
-		return &eserial2_device;
-
-	ulong scratchreg = in_be32((void *)GPIO0_ISR3L);
-	if (!(scratchreg & 0x80)) {
-		/* mark scratchreg valid */
-		scratchreg = (scratchreg & 0xffffff00) | 0x80;
-
-		i2c_init_all();
-
-		i = bootstrap_eeprom_read(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
-					  0x10, buf, 4);
-		if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
-			scratchreg |= buf[2];
-
-			/* bringup delay for console */
-			for (delay = 0; delay < (1000 * (ulong)buf[3]); delay++)
-				udelay(1000);
-		} else
-			scratchreg |= 0x01;
-		out_be32((void *)GPIO0_ISR3L, scratchreg);
-	}
-
-	if (scratchreg & 0x01)
-		return &eserial2_device;
-	else
-		return &eserial1_device;
-}
-
-int board_early_init_f(void)
-{
-	u32 sdr0_cust0;
-	u32 sdr0_pfc1, sdr0_pfc2;
-	u32 reg;
-
-	/* general EBC configuration (disable EBC timeouts) */
-	mtdcr(EBC0_CFGADDR, EBC0_CFG);
-	mtdcr(EBC0_CFGDATA, 0xf8400000);
-
-	/* Setup the GPIO pins */
-	out_be32((void *)GPIO0_OR,    0x40000102);
-	out_be32((void *)GPIO0_TCR,   0x4c90011f);
-	out_be32((void *)GPIO0_OSRL,  0x28051400);
-	out_be32((void *)GPIO0_OSRH,  0x55005000);
-	out_be32((void *)GPIO0_TSRL,  0x08051400);
-	out_be32((void *)GPIO0_TSRH,  0x55005000);
-	out_be32((void *)GPIO0_ISR1L, 0x54000000);
-	out_be32((void *)GPIO0_ISR1H, 0x00000000);
-	out_be32((void *)GPIO0_ISR2L, 0x44000000);
-	out_be32((void *)GPIO0_ISR2H, 0x00000100);
-	out_be32((void *)GPIO0_ISR3L, 0x00000000);
-	out_be32((void *)GPIO0_ISR3H, 0x00000000);
-
-	out_be32((void *)GPIO1_OR,    0x80002408);
-	out_be32((void *)GPIO1_TCR,   0xd6003c08);
-	out_be32((void *)GPIO1_OSRL,  0x0a5a0000);
-	out_be32((void *)GPIO1_OSRH,  0x00000000);
-	out_be32((void *)GPIO1_TSRL,  0x00000000);
-	out_be32((void *)GPIO1_TSRH,  0x00000000);
-	out_be32((void *)GPIO1_ISR1L, 0x00005555);
-	out_be32((void *)GPIO1_ISR1H, 0x40000000);
-	out_be32((void *)GPIO1_ISR2L, 0x04010000);
-	out_be32((void *)GPIO1_ISR2H, 0x00000000);
-	out_be32((void *)GPIO1_ISR3L, 0x01400000);
-	out_be32((void *)GPIO1_ISR3H, 0x00000000);
-
-	/* patch PLB:PCI divider for 66MHz PCI */
-	mfcpr(CPR0_SPCID, reg);
-	if (pci_is_66mhz() && (reg != 0x02000000)) {
-		mtcpr(CPR0_SPCID, 0x02000000); /* 133MHZ : 2 for 66MHz PCI */
-
-		mfcpr(CPR0_ICFG, reg);
-		reg |= CPR0_ICFG_RLI_MASK;
-		mtcpr(CPR0_ICFG, reg);
-
-		mtspr(SPRN_DBCR0, 0x20000000); /* do chip reset */
-	}
-
-	/*
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000005);	/* ATI & UIC1 crit are critical */
-	mtdcr(UIC0PR, 0xfffff7ef);
-	mtdcr(UIC0TR, 0x00000000);
-	mtdcr(UIC0VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffc7f5);
-	mtdcr(UIC1TR, 0x00000000);
-	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC2ER, 0x00000000);	/* disable all */
-	mtdcr(UIC2CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC2PR, 0x27ffffff);
-	mtdcr(UIC2TR, 0x00000000);
-	mtdcr(UIC2VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-
-	/* select Ethernet pins */
-	mfsdr(SDR0_PFC1, sdr0_pfc1);
-	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
-		SDR0_PFC1_SELECT_CONFIG_4;
-	mfsdr(SDR0_PFC2, sdr0_pfc2);
-	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
-		SDR0_PFC2_SELECT_CONFIG_4;
-
-	/* enable 2nd IIC */
-	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL;
-
-	mtsdr(SDR0_PFC2, sdr0_pfc2);
-	mtsdr(SDR0_PFC1, sdr0_pfc1);
-
-	/* setup NAND FLASH */
-	mfsdr(SDR0_CUST0, sdr0_cust0);
-	sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL	|
-		SDR0_CUST0_NDFC_ENABLE		|
-		SDR0_CUST0_NDFC_BW_8_BIT	|
-		SDR0_CUST0_NDFC_ARE_MASK	|
-		(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
-	mtsdr(SDR0_CUST0, sdr0_cust0);
-
-	return 0;
-}
-
-#if defined(CONFIG_MISC_INIT_F)
-int misc_init_f(void)
-{
-	struct pci_controller hose;
-	hose.first_busno = 0;
-	hose.last_busno = 0;
-	hose.region_count = 0;
-
-	if (getenv("pciearly") && (!is_monarch())) {
-		printf("PCI:   early target init\n");
-		pci_setup_indirect(&hose, PCIL0_CFGADR, PCIL0_CFGDATA);
-		pci_target_init(&hose);
-	}
-	return 0;
-}
-#endif
-
-/*
- * misc_init_r.
- */
-int misc_init_r(void)
-{
-	uint pbcr;
-	int size_val = 0;
-	u32 reg;
-	unsigned long usb2d0cr = 0;
-	unsigned long usb2phy0cr, usb2h0cr = 0;
-	unsigned long sdr0_pfc1;
-	unsigned long sdr0_srst0, sdr0_srst1;
-	char *act = getenv("usbact");
-
-	/*
-	 * FLASH stuff...
-	 */
-
-	/* Re-do sizing to get full correct info */
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	pbcr = mfdcr(EBC0_CFGDATA);
-	size_val = ffs(gd->bd->bi_flashsize) - 21;
-	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	mtdcr(EBC0_CFGDATA, pbcr);
-
-	/*
-	 * Re-check to get correct base address
-	 */
-	flash_get_size(gd->bd->bi_flashstart, 0);
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CONFIG_SYS_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	/* Env protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    CONFIG_ENV_ADDR_REDUND,
-			    CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
-			    &flash_info[0]);
-#endif
-
-	/*
-	 * USB suff...
-	 */
-	if ((act == NULL || strcmp(act, "host") == 0) &&
-	    !(in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT)) {
-		/* SDR Setting */
-		mfsdr(SDR0_PFC1, sdr0_pfc1);
-		mfsdr(SDR0_USB2D0CR, usb2d0cr);
-		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mfsdr(SDR0_USB2H0CR, usb2h0cr);
-
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
-
-		/*
-		 * An 8-bit/60MHz interface is the only possible alternative
-		 * when connecting the Device to the PHY
-		 */
-		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
-
-		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
-
-		mtsdr(SDR0_PFC1, sdr0_pfc1);
-		mtsdr(SDR0_USB2D0CR, usb2d0cr);
-		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mtsdr(SDR0_USB2H0CR, usb2h0cr);
-
-		/*
-		 * Take USB out of reset:
-		 * -Initial status = all cores are in reset
-		 * -deassert reset to OPB1, P4OPB0, OPB2, PLB42OPB1 OPB2PLB40 cores
-		 * -wait 1 ms
-		 * -deassert reset to PHY
-		 * -wait 1 ms
-		 * -deassert  reset to HOST
-		 * -wait 4 ms
-		 * -deassert all other resets
-		 */
-		mfsdr(SDR0_SRST1, sdr0_srst1);
-		sdr0_srst1 &= ~(SDR0_SRST1_OPBA1 |	\
-				SDR0_SRST1_P4OPB0 |	\
-				SDR0_SRST1_OPBA2 |	\
-				SDR0_SRST1_PLB42OPB1 |	\
-				SDR0_SRST1_OPB2PLB40);
-		mtsdr(SDR0_SRST1, sdr0_srst1);
-		udelay(1000);
-
-		mfsdr(SDR0_SRST1, sdr0_srst1);
-		sdr0_srst1 &= ~SDR0_SRST1_USB20PHY;
-		mtsdr(SDR0_SRST1, sdr0_srst1);
-		udelay(1000);
-
-		mfsdr(SDR0_SRST0, sdr0_srst0);
-		sdr0_srst0 &= ~SDR0_SRST0_USB2H;
-		mtsdr(SDR0_SRST0, sdr0_srst0);
-		udelay(4000);
-
-		/* finally all the other resets */
-		mtsdr(SDR0_SRST1, 0x00000000);
-		mtsdr(SDR0_SRST0, 0x00000000);
-
-		if (!(in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT)) {
-			/* enable power on USB socket */
-			out_be32((void *)GPIO1_OR,
-				 in_be32((void *)GPIO1_OR) & ~GPIO1_USB_PWR_N);
-		}
-
-		printf("USB:   Host\n");
-
-	} else if ((strcmp(act, "dev") == 0) ||
-		   (in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT)) {
-		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
-		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x672c6000);
-
-		udelay (1000);
-		mtsdr(SDR0_SRST0, 0x00000080);
-
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x60206000);
-
-		*(unsigned int *)(0xe0000350) = 0x00000001;
-
-		udelay (1000);
-		mtsdr(SDR0_SRST1, 0x60306000);
-
-		/* SDR Setting */
-		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mfsdr(SDR0_USB2H0CR, usb2h0cr);
-		mfsdr(SDR0_USB2D0CR, usb2d0cr);
-		mfsdr(SDR0_PFC1, sdr0_pfc1);
-
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
-		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
-
-		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
-
-		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-
-		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
-		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
-
-		mtsdr(SDR0_USB2H0CR, usb2h0cr);
-		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mtsdr(SDR0_USB2D0CR, usb2d0cr);
-		mtsdr(SDR0_PFC1, sdr0_pfc1);
-
-		/*clear resets*/
-		udelay(1000);
-		mtsdr(SDR0_SRST1, 0x00000000);
-		udelay(1000);
-		mtsdr(SDR0_SRST0, 0x00000000);
-
-		printf("USB:   Device\n");
-	}
-
-	/*
-	 * Clear PLB4A0_ACR[WRP]
-	 * This fix will make the MAL burst disabling patch for the Linux
-	 * EMAC driver obsolete.
-	 */
-	reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
-	mtdcr(PLB4A0_ACR, reg);
-
-#ifdef CONFIG_FPGA
-	pmc440_init_fpga();
-#endif
-
-	/* turn off POST LED */
-	out_be32((void *)GPIO1_OR, in_be32((void *)GPIO1_OR) & ~GPIO1_POST_N);
-	/* turn on RUN LED */
-	out_be32((void *)GPIO0_OR,
-		 in_be32((void *)GPIO0_OR) & ~GPIO0_LED_RUN_N);
-	return 0;
-}
-
-int is_monarch(void)
-{
-	if (in_be32((void *)GPIO1_IR) & GPIO1_NONMONARCH)
-		return 0;
-
-	return 1;
-}
-
-static int pci_is_66mhz(void)
-{
-	if (in_be32((void *)GPIO1_IR) & GPIO1_M66EN)
-		return 1;
-	return 0;
-}
-
-static int board_revision(void)
-{
-	return (int)((in_be32((void *)GPIO1_IR) & GPIO1_HWID_MASK) >> 4);
-}
-
-int checkboard(void)
-{
-	puts("Board: esd GmbH - PMC440");
-
-	gd->board_type = board_revision();
-	printf(", Rev 1.%ld, ", gd->board_type);
-
-	if (!is_monarch()) {
-		puts("non-");
-	}
-
-	printf("monarch, PCI=%s MHz\n", pci_is_66mhz() ? "66" : "33");
-	return (0);
-}
-
-
-#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
-/*
- * Assign interrupts to PCI devices. Some OSs rely on this.
- */
-void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
-	unsigned char int_line[] = {IRQ_PCIC, IRQ_PCID, IRQ_PCIA, IRQ_PCIB};
-
-	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
-				   int_line[PCI_DEV(dev) & 0x03]);
-}
-#endif
-
-/*
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
- */
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller *hose)
-{
-	char *ptmla_str, *ptmms_str;
-
-	/*
-	 * Set up Direct MMIO registers
-	 */
-	/*
-	 * PowerPC440EPX PCI Master configuration.
-	 * Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	 * PLB address 0x80000000-0xBFFFFFFF
-	 *     ==> PCI address 0x80000000-0xBFFFFFFF
-	 * Use byte reversed out routines to handle endianess.
-	 * Make this region non-prefetchable.
-	 */
-	out32r(PCIL0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
-						/* - disabled b4 setting */
-	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Addr */
-	out32r(PCIL0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIL0_PMM0MA, 0xc0000001);	/* 1G + No prefetching, */
-						/* and enable region */
-
-	if (!is_monarch()) {
-		ptmla_str = getenv("ptm1la");
-		ptmms_str = getenv("ptm1ms");
-		if(NULL != ptmla_str && NULL != ptmms_str ) {
-			out32r(PCIL0_PTM1MS,
-			       simple_strtoul(ptmms_str, NULL, 16));
-			out32r(PCIL0_PTM1LA,
-			       simple_strtoul(ptmla_str, NULL, 16));
-		} else {
-			/* BAR1: default top 64MB of RAM */
-			out32r(PCIL0_PTM1MS, 0xfc000001);
-			out32r(PCIL0_PTM1LA, 0x0c000000);
-		}
-	} else {
-		/* BAR1: default: complete 256MB RAM */
-		out32r(PCIL0_PTM1MS, 0xf0000001);
-		out32r(PCIL0_PTM1LA, 0x00000000);
-	}
-
-	ptmla_str = getenv("ptm2la");		/* Local Addr. Reg */
-	ptmms_str = getenv("ptm2ms");		/* Memory Size/Attribute */
-	if(NULL != ptmla_str && NULL != ptmms_str ) {
-		out32r(PCIL0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16));
-		out32r(PCIL0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16));
-	} else {
-		/* BAR2: default: 4MB FPGA */
-		out32r(PCIL0_PTM2MS, 0xffc00001); /* Memory Size/Attribute */
-		out32r(PCIL0_PTM2LA, 0xef000000); /* Local Addr. Reg */
-	}
-
-	if (is_monarch()) {
-		/* BAR2: map FPGA registers behind system memory at 1GB */
-		pci_hose_write_config_dword(hose, 0,
-					    PCI_BASE_ADDRESS_2, 0x40000008);
-	}
-
-	/*
-	 * Set up Configuration registers
-	 */
-
-	/* Program the board's vendor id */
-	pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_VENDOR_ID,
-				   CONFIG_SYS_PCI_SUBSYS_VENDORID);
-
-	/* disabled for PMC405 backward compatibility */
-	/* Configure command register as bus master */
-	/* pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); */
-
-
-	/* 240nS PCI clock */
-	pci_hose_write_config_word(hose, 0, PCI_LATENCY_TIMER, 1);
-
-	/* No error reporting */
-	pci_hose_write_config_word(hose, 0, PCI_ERREN, 0);
-
-	if (!is_monarch()) {
-		/* Program the board's subsystem id/classcode */
-		pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_ID,
-					   CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
-		pci_hose_write_config_word(hose, 0, PCI_CLASS_SUB_CODE,
-					   CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
-
-		/* PCI configuration done: release ERREADY */
-		out_be32((void *)GPIO1_OR,
-			 in_be32((void *)GPIO1_OR) | GPIO1_PPC_EREADY);
-		out_be32((void *)GPIO1_TCR,
-			 in_be32((void *)GPIO1_TCR) | GPIO1_PPC_EREADY);
-	} else {
-		/* Program the board's subsystem id/classcode */
-		pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_ID,
-					   CONFIG_SYS_PCI_SUBSYS_ID_MONARCH);
-		pci_hose_write_config_word(hose, 0, PCI_CLASS_SUB_CODE,
-					   CONFIG_SYS_PCI_CLASSCODE_MONARCH);
-	}
-
-	/* enable host configuration */
-	pci_hose_write_config_dword(hose, 0, PCI_BRDGOPT2, 0x00000101);
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-
-/*
- * Override weak default pci_master_init()
- */
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
-void pci_master_init(struct pci_controller *hose)
-{
-	/*
-	 * Only configure the master in monach mode
-	 */
-	if (is_monarch())
-		__pci_master_init(hose);
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
-
-static void wait_for_pci_ready(void)
-{
-	if (!(in_be32((void *)GPIO1_IR) & GPIO1_PPC_EREADY)) {
-		printf("PCI:   Waiting for EREADY (CTRL-C to skip) ... ");
-		while (1) {
-			if (ctrlc()) {
-				puts("abort\n");
-				break;
-			}
-			if (in_be32((void *)GPIO1_IR) & GPIO1_PPC_EREADY) {
-				printf("done\n");
-				break;
-			}
-		}
-	}
-}
-
-/*
- * Override weak is_pci_host()
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
- *
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
- */
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
-	char *s = getenv("pciscan");
-	if (s == NULL)
-		if (is_monarch()) {
-			wait_for_pci_ready();
-			return 1;
-		} else
-			return 0;
-	else if (!strcmp(s, "yes"))
-		return 1;
-
-	return 0;
-}
-#endif /* defined(CONFIG_PCI) */
-
-#ifdef CONFIG_RESET_PHY_R
-static int pmc440_setup_vsc8601(char *devname, int phy_addr,
-				unsigned short behavior, unsigned short method)
-{
-	/* adjust LED behavior */
-	if (miiphy_write(devname, phy_addr, 0x1f, 0x0001) != 0) {
-		printf("Phy%d: register write access failed\n", phy_addr);
-		return -1;
-	}
-
-	miiphy_write(devname, phy_addr, 0x11, 0x0010);
-	miiphy_write(devname, phy_addr, 0x11, behavior);
-	miiphy_write(devname, phy_addr, 0x10, method);
-	miiphy_write(devname, phy_addr, 0x1f, 0x0000);
-
-	return 0;
-}
-
-static int pmc440_setup_ksz9031(char *devname, int phy_addr)
-{
-	unsigned short id1, id2;
-
-	if (miiphy_read(devname, phy_addr, 2, &id1) ||
-	    miiphy_read(devname, phy_addr, 3, &id2)) {
-		printf("Phy%d: cannot read id\n", phy_addr);
-		return -1;
-	}
-
-	if ((id1 != 0x0022) || ((id2 & 0xfff0) != 0x1620)) {
-		printf("Phy%d: unexpected id\n", phy_addr);
-		return -1;
-	}
-
-	/* MMD 2.08: adjust tx_clk pad skew */
-	miiphy_write(devname, phy_addr, 0x0d, 2);
-	miiphy_write(devname, phy_addr, 0x0e, 8);
-	miiphy_write(devname, phy_addr, 0x0d, 0x4002);
-	miiphy_write(devname, phy_addr, 0x0e, 0xf | (0x17 << 5));
-
-	return 0;
-}
-
-void reset_phy(void)
-{
-	char *s;
-	unsigned short val_method, val_behavior;
-
-	if (gd->board_type < 4) {
-		/* special LED setup for NGCC/CANDES */
-		s = getenv("bd_type");
-		if (s && ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes")))) {
-			val_method   = 0x0e0a;
-			val_behavior = 0x0cf2;
-		} else {
-			/* PMC440 standard type */
-			val_method   = 0x0e10;
-			val_behavior = 0x0cf0;
-		}
-
-		/* boards up to rev. 1.3 use Vitesse VSC8601 phys */
-		pmc440_setup_vsc8601("ppc_4xx_eth0", CONFIG_PHY_ADDR,
-				     val_method, val_behavior);
-		pmc440_setup_vsc8601("ppc_4xx_eth1", CONFIG_PHY1_ADDR,
-				     val_method, val_behavior);
-	} else {
-		/* rev. 1.4 uses a Micrel KSZ9031 */
-		pmc440_setup_ksz9031("ppc_4xx_eth0", CONFIG_PHY_ADDR);
-		pmc440_setup_ksz9031("ppc_4xx_eth1", CONFIG_PHY1_ADDR);
-	}
-}
-#endif
-
-#if defined(CONFIG_SYS_EEPROM_WREN)
-/*
- *  Input: <dev_addr> I2C address of EEPROM device to enable.
- *         <state>    -1: deliver current state
- *	               0: disable write
- *		       1: enable write
- *  Returns:          -1: wrong device address
- *                     0: dis-/en- able done
- *		     0/1: current state if <state> was -1.
- */
-int eeprom_write_enable(unsigned dev_addr, int state)
-{
-	if ((CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) &&
-	    (CONFIG_SYS_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
-		return -1;
-	} else {
-		switch (state) {
-		case 1:
-			/* Enable write access, clear bit GPIO_SINT2. */
-			out_be32((void *)GPIO0_OR,
-			      in_be32((void *)GPIO0_OR) & ~GPIO0_EP_EEP);
-			state = 0;
-			break;
-		case 0:
-			/* Disable write access, set bit GPIO_SINT2. */
-			out_be32((void *)GPIO0_OR,
-				 in_be32((void *)GPIO0_OR) | GPIO0_EP_EEP);
-			state = 0;
-			break;
-		default:
-			/* Read current status back. */
-			state = (0 == (in_be32((void *)GPIO0_OR)
-				       & GPIO0_EP_EEP));
-			break;
-		}
-	}
-	return state;
-}
-#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
-
-#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
-int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
-			   uchar *buffer, unsigned cnt)
-{
-	unsigned end = offset + cnt;
-	unsigned blk_off;
-	int rcode = 0;
-
-#if defined(CONFIG_SYS_EEPROM_WREN)
-	eeprom_write_enable(dev_addr, 1);
-#endif
-	/*
-	 * Write data until done or would cross a write page boundary.
-	 * We must write the address again when changing pages
-	 * because the address counter only increments within a page.
-	 */
-	while (offset < end) {
-		unsigned alen, len;
-		unsigned maxlen;
-		uchar addr[2];
-
-		blk_off = offset & 0xFF;	/* block offset */
-
-		addr[0] = offset >> 8;		/* block number */
-		addr[1] = blk_off;		/* block offset */
-		alen	= 2;
-		addr[0] |= dev_addr;		/* insert device address */
-
-		len = end - offset;
-
-#define	BOOT_EEPROM_PAGE_SIZE	   (1 << CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS)
-#define	BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
-
-		maxlen = BOOT_EEPROM_PAGE_SIZE -
-			BOOT_EEPROM_PAGE_OFFSET(blk_off);
-		if (maxlen > I2C_RXTX_LEN)
-			maxlen = I2C_RXTX_LEN;
-
-		if (len > maxlen)
-			len = maxlen;
-
-		if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
-			rcode = 1;
-
-		buffer += len;
-		offset += len;
-
-#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
-		udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-#endif
-	}
-#if defined(CONFIG_SYS_EEPROM_WREN)
-	eeprom_write_enable(dev_addr, 0);
-#endif
-	return rcode;
-}
-
-static int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
-				 uchar *buffer, unsigned cnt)
-{
-	unsigned end = offset + cnt;
-	unsigned blk_off;
-	int rcode = 0;
-
-	/*
-	 * Read data until done or would cross a page boundary.
-	 * We must write the address again when changing pages
-	 * because the next page may be in a different device.
-	 */
-	while (offset < end) {
-		unsigned alen, len;
-		unsigned maxlen;
-		uchar addr[2];
-
-		blk_off = offset & 0xFF;	/* block offset */
-
-		addr[0] = offset >> 8;		/* block number */
-		addr[1] = blk_off;		/* block offset */
-		alen	= 2;
-
-		addr[0] |= dev_addr;		/* insert device address */
-
-		len = end - offset;
-
-		maxlen = 0x100 - blk_off;
-		if (maxlen > I2C_RXTX_LEN)
-			maxlen = I2C_RXTX_LEN;
-		if (len > maxlen)
-			len = maxlen;
-
-		if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
-			rcode = 1;
-		buffer += len;
-		offset += len;
-	}
-
-	return rcode;
-}
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
-int board_usb_init(int index, enum usb_init_type init)
-{
-	char *act = getenv("usbact");
-	int i;
-
-	if ((act == NULL || strcmp(act, "host") == 0) &&
-	    !(in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT))
-		/* enable power on USB socket */
-		out_be32((void *)GPIO1_OR,
-			 in_be32((void *)GPIO1_OR) & ~GPIO1_USB_PWR_N);
-
-	for (i=0; i<1000; i++)
-		udelay(1000);
-
-	return 0;
-}
-
-int usb_board_stop(void)
-{
-	/* disable power on USB socket */
-	out_be32((void *)GPIO1_OR, in_be32((void *)GPIO1_OR) | GPIO1_USB_PWR_N);
-	return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	return usb_board_stop();
-}
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	int rc;
-
-	__ft_board_setup(blob, bd);
-
-	/*
-	 * Disable PCI in non-monarch mode.
-	 */
-	if (!is_monarch()) {
-		rc = fdt_find_and_setprop(blob, "/plb/pci@1ec000000", "status",
-					  "disabled", sizeof("disabled"), 1);
-		if (rc) {
-			printf("Unable to update property status in PCI node, ");
-			printf("err=%s\n", fdt_strerror(rc));
-		}
-	}
-
-	return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/esd/pmc440/pmc440.h b/board/esd/pmc440/pmc440.h
deleted file mode 100644
index 84e0b1f..0000000
--- a/board/esd/pmc440/pmc440.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __PMC440_H__
-#define __PMC440_H__
-
-/*
- * GPIOs
- */
-#define GPIO1_INTA_FAKE           (0x80000000 >> (45-32)) /* GPIO45 OD */
-#define GPIO1_NONMONARCH          (0x80000000 >> (63-32)) /* GPIO63 I */
-#define GPIO1_PPC_EREADY          (0x80000000 >> (62-32)) /* GPIO62 I/O */
-#define GPIO1_M66EN               (0x80000000 >> (61-32)) /* GPIO61 I */
-#define GPIO1_POST_N              (0x80000000 >> (60-32)) /* GPIO60 O */
-#define GPIO1_IOEN_N              (0x80000000 >> (50-32)) /* GPIO50 O */
-#define GPIO1_HWID_MASK           (0xf0000000 >> (56-32)) /* GPIO56..59 I */
-
-#define GPIO1_USB_PWR_N           (0x80000000 >> (32-32)) /* GPIO32 I */
-#define GPIO0_LED_RUN_N           (0x80000000 >> 30)      /* GPIO30 O */
-#define GPIO0_EP_EEP              (0x80000000 >> 23)      /* GPIO23 O */
-#define GPIO0_USB_ID              (0x80000000 >> 21)      /* GPIO21 I */
-#define GPIO0_USB_PRSNT           (0x80000000 >> 20)      /* GPIO20 I */
-
-/*
- * FPGA programming pin configuration
- */
-#define GPIO1_FPGA_PRG            (0x80000000 >> (53-32)) /* FPGA program pin (ppc output) */
-#define GPIO1_FPGA_CLK            (0x80000000 >> (51-32)) /* FPGA clk pin (ppc output)     */
-#define GPIO1_FPGA_DATA           (0x80000000 >> (52-32)) /* FPGA data pin (ppc output)    */
-#define GPIO1_FPGA_DONE           (0x80000000 >> (55-32)) /* FPGA done pin (ppc input)     */
-#define GPIO1_FPGA_INIT           (0x80000000 >> (54-32)) /* FPGA init pin (ppc input)     */
-#define GPIO0_FPGA_FORCEINIT      (0x80000000 >> 27)      /* low: force INIT# low */
-
-/*
- * FPGA interface
- */
-#define FPGA_BA CONFIG_SYS_FPGA_BASE0
-#define FPGA_OUT32(p,v) out_be32(((void*)(p)), (v))
-#define FPGA_IN32(p) in_be32((void*)(p))
-#define FPGA_SETBITS(p,v) out_be32(((void*)(p)), in_be32((void*)(p)) | (v))
-#define FPGA_CLRBITS(p,v) out_be32(((void*)(p)), in_be32((void*)(p)) & ~(v))
-
-struct pmc440_fifo_s {
-	u32 data;
-	u32 ctrl;
-};
-
-/* fifo ctrl register */
-#define FIFO_IE              (1 << 15)
-#define FIFO_OVERFLOW        (1 << 10)
-#define FIFO_EMPTY           (1 <<  9)
-#define FIFO_FULL            (1 <<  8)
-#define FIFO_LEVEL_MASK      0x000000ff
-
-#define FIFO_COUNT           4
-
-struct pmc440_fpga_s {
-	u32 ctrla;
-	u32 status;
-	u32 ctrlb;
-	u32 pad1[0x40 / sizeof(u32) - 3];
-	u32 irig_time;                  /* offset: 0x0040 */
-	u32 irig_tod;
-	u32 irig_cf;
-	u32 pad2;
-	u32 irig_rx_time;               /* offset: 0x0050 */
-	u32 pad3[3];
-	u32 hostctrl;                   /* offset: 0x0060 */
-	u32 pad4[0x20 / sizeof(u32) - 1];
-	struct pmc440_fifo_s fifo[FIFO_COUNT]; /* 0x0080..0x009f */
-};
-
-typedef struct pmc440_fpga_s pmc440_fpga_t;
-
-/* ctrl register */
-#define CTRL_HOST_IE         (1 <<  8)
-
-/* outputs */
-#define RESET_EN    (1 << 31)
-#define CLOCK_EN    (1 << 30)
-#define RESET_OUT   (1 << 19)
-#define CLOCK_OUT   (1 << 22)
-#define RESET_OUT   (1 << 19)
-#define IRIGB_R_OUT (1 << 14)
-
-/* status register */
-#define STATUS_VERSION_SHIFT 24
-#define STATUS_VERSION_MASK  0xff000000
-#define STATUS_HWREV_SHIFT   20
-#define STATUS_HWREV_MASK    0x00f00000
-
-#define STATUS_CAN_ISF       (1 << 11)
-#define STATUS_CSTM_ISF      (1 << 10)
-#define STATUS_FIFO_ISF      (1 <<  9)
-#define STATUS_HOST_ISF      (1 <<  8)
-
-/* inputs */
-#define RESET_IN    (1 << 0)
-#define CLOCK_IN    (1 << 1)
-#define IRIGB_R_IN  (1 << 5)
-
-/* hostctrl register */
-#define HOSTCTRL_PMCRSTOUT_GATE (1 <<  17)
-#define HOSTCTRL_PMCRSTOUT_FLAG (1 <<  16)
-#define HOSTCTRL_CSTM1IE_GATE (1 <<  7)
-#define HOSTCTRL_CSTM1IW_FLAG (1 <<  6)
-#define HOSTCTRL_CSTM0IE_GATE (1 <<  5)
-#define HOSTCTRL_CSTM0IW_FLAG (1 <<  4)
-#define HOSTCTRL_FIFOIE_GATE (1 <<  3)
-#define HOSTCTRL_FIFOIE_FLAG (1 <<  2)
-#define HOSTCTRL_HCINT_GATE  (1 <<  1)
-#define HOSTCTRL_HCINT_FLAG  (1 <<  0)
-
-#define NGCC_CTRL_BASE         (CONFIG_SYS_FPGA_BASE0 + 0x80000)
-#define NGCC_CTRL_FPGARST_N    (1 <<  2)
-
-/*
- * FPGA to PPC interrupt
- */
-#define IRQ0_FPGA            (32+28) /* UIC1 - FPGA internal */
-#define IRQ1_FPGA            (32+30) /* UIC1 - custom module */
-#define IRQ2_FPGA            (64+ 3) /* UIC2 - custom module / CAN */
-#define IRQ_ETH0             (64+ 4) /* UIC2 */
-#define IRQ_ETH1             (   27) /* UIC0 */
-#define IRQ_RTC              (64+ 0) /* UIC2 */
-#define IRQ_PCIA             (64+ 1) /* UIC2 */
-#define IRQ_PCIB             (32+18) /* UIC1 */
-#define IRQ_PCIC             (32+19) /* UIC1 */
-#define IRQ_PCID             (32+20) /* UIC1 */
-
-#endif /* __PMC440_H__ */
diff --git a/board/esd/pmc440/sdram.c b/board/esd/pmc440/sdram.c
deleted file mode 100644
index c379e77..0000000
--- a/board/esd/pmc440/sdram.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * (C) Copyright 2009
- * Matthias Fuchs, esd gmbh, matthias.fuchs@esd.eu
- *
- * (C) Copyright 2006
- * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * (C) Copyright 2006-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* define DEBUG for debug output */
-#undef DEBUG
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/ppc440.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern int denali_wait_for_dlllock(void);
-extern void denali_core_search_data_eye(void);
-
-struct sdram_conf_s {
-	ulong size;
-	int rows;
-	int banks;
-};
-
-struct sdram_conf_s sdram_conf[] = {
-	{(1024 << 20), 14, 8}, /* 1GByte: 4x2GBit, 14x10, 8 banks */
-	{(512 << 20),  13, 8}, /* 512MByte: 4x1GBit, 13x10, 8 banks */
-	{(256 << 20),  13, 4}, /* 256MByte: 4x512MBit, 13x10, 4 banks */
-};
-
-/*
- * dram_init -- 440EPx's DDR controller is a DENALI Core
- */
-int initdram_by_rb(int rows, int banks)
-{
-	ulong speed = get_bus_freq(0);
-
-	mtsdram(DDR0_02, 0x00000000);
-
-	mtsdram(DDR0_00, 0x0000190A);
-	mtsdram(DDR0_01, 0x01000000);
-	mtsdram(DDR0_03, 0x02030602);
-	mtsdram(DDR0_04, 0x0A020200);
-	mtsdram(DDR0_05, 0x02020308);
-	mtsdram(DDR0_06, 0x0102C812);
-	mtsdram(DDR0_07, 0x000D0100);
-	mtsdram(DDR0_08, 0x02430001);
-	mtsdram(DDR0_09, 0x00011D5F);
-	mtsdram(DDR0_10, 0x00000100);
-	mtsdram(DDR0_11, 0x0027C800);
-	mtsdram(DDR0_12, 0x00000003);
-	mtsdram(DDR0_14, 0x00000000);
-	mtsdram(DDR0_17, 0x19000000);
-	mtsdram(DDR0_18, 0x19191919);
-	mtsdram(DDR0_19, 0x19191919);
-	mtsdram(DDR0_20, 0x0B0B0B0B);
-	mtsdram(DDR0_21, 0x0B0B0B0B);
-	mtsdram(DDR0_22, 0x00267F0B);
-	mtsdram(DDR0_23, 0x00000000);
-	mtsdram(DDR0_24, 0x01010002);
-	if (speed > 133333334)
-		mtsdram(DDR0_26, 0x5B26050C);
-	else
-		mtsdram(DDR0_26, 0x5B260408);
-	mtsdram(DDR0_27, 0x0000682B);
-	mtsdram(DDR0_28, 0x00000000);
-	mtsdram(DDR0_31, 0x00000000);
-
-	mtsdram(DDR0_42,
-		DDR0_42_ADDR_PINS_DECODE(14 - rows) |
-		0x00000006);
-	mtsdram(DDR0_43,
-		DDR0_43_EIGHT_BANK_MODE_ENCODE(8 == banks ? 1 : 0) |
-		0x030A0200);
-
-	mtsdram(DDR0_44, 0x00000003);
-	mtsdram(DDR0_02, 0x00000001);
-
-	denali_wait_for_dlllock();
-
-#ifdef CONFIG_DDR_DATA_EYE
-	/*
-	 * Perform data eye search if requested.
-	 */
-	denali_core_search_data_eye();
-#endif
-	/*
-	 * Clear possible errors resulting from data-eye-search.
-	 * If not done, then we could get an interrupt later on when
-	 * exceptions are enabled.
-	 */
-	set_mcsr(get_mcsr());
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	phys_size_t size;
-	int n;
-
-	/* go through supported memory configurations */
-	for (n = 0; n < ARRAY_SIZE(sdram_conf); n++) {
-		size = sdram_conf[n].size;
-
-		/* program TLB entries */
-		program_tlb(0, CONFIG_SYS_SDRAM_BASE, size,
-			    TLB_WORD2_I_ENABLE);
-
-		/*
-		 * setup denali core
-		 */
-		initdram_by_rb(sdram_conf[n].rows,
-			       sdram_conf[n].banks);
-
-		/* check for suitable configuration */
-		if (get_ram_size(CONFIG_SYS_SDRAM_BASE, size) == size) {
-			gd->ram_size = size;
-			return 0;
-		}
-
-		/* delete TLB entries */
-		remove_tlb(CONFIG_SYS_SDRAM_BASE, size);
-	}
-
-	return -ENXIO;
-}
diff --git a/board/esd/vom405/Kconfig b/board/esd/vom405/Kconfig
deleted file mode 100644
index ecdf8c9..0000000
--- a/board/esd/vom405/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_VOM405
-
-config SYS_BOARD
-	default "vom405"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "VOM405"
-
-endif
diff --git a/board/esd/vom405/MAINTAINERS b/board/esd/vom405/MAINTAINERS
deleted file mode 100644
index 385f60a..0000000
--- a/board/esd/vom405/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-VOM405 BOARD
-M:	Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S:	Maintained
-F:	board/esd/vom405/
-F:	include/configs/VOM405.h
-F:	configs/VOM405_defconfig
diff --git a/board/esd/vom405/Makefile b/board/esd/vom405/Makefile
deleted file mode 100644
index 7cf5c02..0000000
--- a/board/esd/vom405/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# Objects for Xilinx JTAG programming (CPLD)
-CPLD    = ../common/xilinx_jtag/lenval.o \
-	  ../common/xilinx_jtag/micro.o \
-	  ../common/xilinx_jtag/ports.o
-
-obj-y	= vom405.o flash.o ../common/misc.o $(CPLD)
diff --git a/board/esd/vom405/flash.c b/board/esd/vom405/flash.c
deleted file mode 100644
index 23e8164..0000000
--- a/board/esd/vom405/flash.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0;
-	int i;
-	uint pbcr;
-	unsigned long base_b0;
-	int size_val = 0;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-	/* Setup offsets */
-	flash_get_offsets (-size_b0, &flash_info[0]);
-
-	/* Re-do sizing to get full correct info */
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	pbcr = mfdcr(EBC0_CFGDATA);
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	base_b0 = -size_b0;
-	switch (size_b0) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	}
-	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(EBC0_CFGDATA, pbcr);
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CONFIG_SYS_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	flash_info[0].size = size_b0;
-
-	return (size_b0);
-}
diff --git a/board/esd/vom405/vom405.c b/board/esd/vom405/vom405.c
deleted file mode 100644
index 7de6f66..0000000
--- a/board/esd/vom405/vom405.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * (C) Copyright 2001-2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-#include <malloc.h>
-#include <sja1000.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void lxt971_no_sleep(void);
-
-/*
- * generate a short spike on the CAN tx line
- * to bring the couplers in sync
- */
-void init_coupler(u32 addr)
-{
-	struct sja1000_basic_s *ctrl = (struct sja1000_basic_s *)addr;
-
-	/* reset */
-	out_8(&ctrl->cr, CR_RR);
-
-	/* dominant */
-	out_8(&ctrl->btr0, 0x00); /* btr setup is required */
-	out_8(&ctrl->btr1, 0x14); /* we use 1Mbit/s */
-	out_8(&ctrl->oc, OC_TP1 | OC_TN1 | OC_POL1 |
-	      OC_TP0 | OC_TN0 | OC_POL0 | OC_MODE1);
-	out_8(&ctrl->cr, 0x00);
-
-	/* delay */
-	in_8(&ctrl->cr);
-	in_8(&ctrl->cr);
-	in_8(&ctrl->cr);
-	in_8(&ctrl->cr);
-
-	/* reset */
-	out_8(&ctrl->cr, CR_RR);
-}
-
-int board_early_init_f (void)
-{
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);       /* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(UIC0PR, 0xFFFFFF80);       /* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);       /* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);      /* set vect base=0,INT0 highest priority*/
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-
-	/*
-	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
-	 */
-	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
-
-	/*
-	 * Reset CPLD via GPIO12 (CS3) pin
-	 */
-	out_be32((void *)GPIO0_OR,
-		 in_be32((void *)GPIO0_OR) & ~(0x80000000 >> 12));
-	udelay(1000); /* wait 1ms */
-	out_be32((void *)GPIO0_OR,
-		 in_be32((void *)GPIO0_OR) | (0x80000000 >> 12));
-	udelay(1000); /* wait 1ms */
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/*
-	 * Init magnetic coupler
-	 */
-	if (!getenv("noinitcoupler"))
-		init_coupler(CAN_BA);
-
-	return (0);
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof(str));
-	int flashcnt;
-	int delay;
-	u8 *led_reg = (u8 *)(CAN_BA + 0x1000);
-
-	puts ("Board: ");
-
-	if (i == -1) {
-		puts ("### No HW ID - assuming VOM405");
-	} else {
-		puts(str);
-	}
-
-	printf(" (PLD-Version=%02d)\n", in_8(led_reg));
-
-	/*
-	 * Flash LEDs
-	 */
-	for (flashcnt = 0; flashcnt < 3; flashcnt++) {
-		out_8(led_reg, 0x40);        /* LED_B..D off */
-		for (delay = 0; delay < 100; delay++)
-			udelay(1000);
-		out_8(led_reg, 0x47);        /* LED_B..D on */
-		for (delay = 0; delay < 50; delay++)
-			udelay(1000);
-	}
-	out_8(led_reg, 0x40);
-
-	return 0;
-}
-
-void reset_phy(void)
-{
-#ifdef CONFIG_LXT971_NO_SLEEP
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-#endif
-}
diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c
deleted file mode 100644
index 35fa06a..0000000
--- a/board/gdsys/405ep/405ep.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * (C) Copyright 2010
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-#include <asm/global_data.h>
-
-#include "405ep.h"
-#include <gdsys_fpga.h>
-
-#define REFLECTION_TESTPATTERN 0xdede
-#define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff)
-
-#ifdef CONFIG_SYS_FPGA_NO_RFL_HI
-#define REFLECTION_TESTREG reflection_low
-#else
-#define REFLECTION_TESTREG reflection_high
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int get_fpga_state(unsigned dev)
-{
-	return gd->arch.fpga_state[dev];
-}
-
-int board_early_init_f(void)
-{
-	unsigned k;
-
-	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
-		gd->arch.fpga_state[k] = 0;
-
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);	/* set all to be non-critical */
-	mtdcr(UIC0PR, 0xFFFFFF80);	/* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest prio */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	/*
-	 * EBC Configuration Register: set ready timeout to 512 ebc-clks
-	 * -> ca. 15 us
-	 */
-	mtebc(EBC0_CFG, 0xa8400000);	/* ebc always driven */
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	unsigned k;
-	unsigned ctr;
-
-	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
-		gd->arch.fpga_state[k] = 0;
-
-	/*
-	 * reset FPGA
-	 */
-	gd405ep_init();
-
-	gd405ep_set_fpga_reset(1);
-
-	gd405ep_setup_hw();
-
-	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
-		ctr = 0;
-		while (!gd405ep_get_fpga_done(k)) {
-			udelay(100000);
-			if (ctr++ > 5) {
-				gd->arch.fpga_state[k] |=
-					FPGA_STATE_DONE_FAILED;
-				break;
-			}
-		}
-	}
-
-	udelay(10);
-
-	gd405ep_set_fpga_reset(0);
-
-	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
-		/*
-		 * wait for fpga out of reset
-		 */
-		ctr = 0;
-		while (1) {
-			u16 val;
-
-			FPGA_SET_REG(k, reflection_low, REFLECTION_TESTPATTERN);
-
-			FPGA_GET_REG(k, REFLECTION_TESTREG, &val);
-			if (val == REFLECTION_TESTPATTERN_INV)
-				break;
-
-			udelay(100000);
-			if (ctr++ > 5) {
-				gd->arch.fpga_state[k] |=
-					FPGA_STATE_REFLECTION_FAILED;
-				break;
-			}
-		}
-	}
-
-	return 0;
-}
diff --git a/board/gdsys/405ep/405ep.h b/board/gdsys/405ep/405ep.h
deleted file mode 100644
index 5647dbc..0000000
--- a/board/gdsys/405ep/405ep.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __405EP_H_
-#define __405EP_H_
-
-/* functions to be provided by board implementation */
-void gd405ep_init(void);
-void gd405ep_set_fpga_reset(unsigned state);
-void gd405ep_setup_hw(void);
-int gd405ep_get_fpga_done(unsigned fpga);
-
-#endif /* __405EP_H_ */
diff --git a/board/gdsys/405ep/Kconfig b/board/gdsys/405ep/Kconfig
deleted file mode 100644
index 20cb80f..0000000
--- a/board/gdsys/405ep/Kconfig
+++ /dev/null
@@ -1,51 +0,0 @@
-if TARGET_DLVISION_10G
-
-config SYS_BOARD
-	default "405ep"
-
-config SYS_VENDOR
-	default "gdsys"
-
-config SYS_CONFIG_NAME
-	default "dlvision-10g"
-
-endif
-
-if TARGET_IO
-
-config SYS_BOARD
-	default "405ep"
-
-config SYS_VENDOR
-	default "gdsys"
-
-config SYS_CONFIG_NAME
-	default "io"
-
-endif
-
-if TARGET_IOCON
-
-config SYS_BOARD
-	default "405ep"
-
-config SYS_VENDOR
-	default "gdsys"
-
-config SYS_CONFIG_NAME
-	default "iocon"
-
-endif
-
-if TARGET_NEO
-
-config SYS_BOARD
-	default "405ep"
-
-config SYS_VENDOR
-	default "gdsys"
-
-config SYS_CONFIG_NAME
-	default "neo"
-
-endif
diff --git a/board/gdsys/405ep/MAINTAINERS b/board/gdsys/405ep/MAINTAINERS
deleted file mode 100644
index 1403880..0000000
--- a/board/gdsys/405ep/MAINTAINERS
+++ /dev/null
@@ -1,12 +0,0 @@
-405EP BOARD
-M:	Dirk Eibach <eibach@gdsys.de>
-S:	Maintained
-F:	board/gdsys/405ep/
-F:	include/configs/dlvision-10g.h
-F:	configs/dlvision-10g_defconfig
-F:	include/configs/io.h
-F:	configs/io_defconfig
-F:	include/configs/iocon.h
-F:	configs/iocon_defconfig
-F:	include/configs/neo.h
-F:	configs/neo_defconfig
diff --git a/board/gdsys/405ep/Makefile b/board/gdsys/405ep/Makefile
deleted file mode 100644
index 857ec04..0000000
--- a/board/gdsys/405ep/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y := 405ep.o
-obj-$(CONFIG_NEO) += neo.o
-obj-$(CONFIG_IO) += io.o
-obj-$(CONFIG_IOCON) += iocon.o
-obj-$(CONFIG_DLVISION_10G) += dlvision-10g.o
diff --git a/board/gdsys/405ep/dlvision-10g.c b/board/gdsys/405ep/dlvision-10g.c
deleted file mode 100644
index b531786..0000000
--- a/board/gdsys/405ep/dlvision-10g.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * (C) Copyright 2010
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-
-#include "405ep.h"
-#include <gdsys_fpga.h>
-
-#include "../common/osd.h"
-
-#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
-#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
-#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-#define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300)
-
-#define LATCH2_MC2_PRESENT_N 0x0080
-
-enum {
-	UNITTYPE_MAIN = 1<<0,
-	UNITTYPE_SERVER = 1<<1,
-	UNITTYPE_DISPLAYPORT = 1<<2,
-};
-
-enum {
-	HWVER_101 = 0,
-	HWVER_110 = 1,
-	HWVER_130 = 2,
-	HWVER_140 = 3,
-	HWVER_150 = 4,
-	HWVER_160 = 5,
-	HWVER_170 = 6,
-};
-
-enum {
-	AUDIO_NONE = 0,
-	AUDIO_TX = 1,
-	AUDIO_RX = 2,
-	AUDIO_RXTX = 3,
-};
-
-enum {
-	SYSCLK_156250 = 2,
-};
-
-enum {
-	RAM_NONE = 0,
-	RAM_DDR2_32 = 1,
-	RAM_DDR2_64 = 2,
-};
-
-struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
-
-int misc_init_r(void)
-{
-	/*
-	 * Note: DTT has been removed. Please use UCLASS_THERMAL.
-	 *
-	 * startup fans
-	 *
-	 * dtt_init();
-	 */
-
-	return 0;
-}
-
-static unsigned int get_hwver(void)
-{
-	u16 latch3 = in_le16((void *)LATCH3_BASE);
-
-	return latch3 & 0x0003;
-}
-
-static unsigned int get_mc2_present(void)
-{
-	u16 latch2 = in_le16((void *)LATCH2_BASE);
-
-	return !(latch2 & LATCH2_MC2_PRESENT_N);
-}
-
-static void print_fpga_info(unsigned dev)
-{
-	u16 versions;
-	u16 fpga_version;
-	u16 fpga_features;
-	unsigned unit_type;
-	unsigned hardware_version;
-	unsigned feature_rs232;
-	unsigned feature_audio;
-	unsigned feature_sysclock;
-	unsigned feature_ramconfig;
-	unsigned feature_carrier_speed;
-	unsigned feature_carriers;
-	unsigned feature_video_channels;
-	int fpga_state = get_fpga_state(dev);
-
-	printf("FPGA%d: ", dev);
-
-	FPGA_GET_REG(dev, versions, &versions);
-	FPGA_GET_REG(dev, fpga_version, &fpga_version);
-	FPGA_GET_REG(dev, fpga_features, &fpga_features);
-
-	hardware_version = versions & 0x000f;
-
-	if (fpga_state
-	    && !((hardware_version == HWVER_101)
-		 && (fpga_state == FPGA_STATE_DONE_FAILED))) {
-		puts("not available\n");
-		if (fpga_state & FPGA_STATE_DONE_FAILED)
-			puts("       Waiting for FPGA-DONE timed out.\n");
-		if (fpga_state & FPGA_STATE_REFLECTION_FAILED)
-			puts("       FPGA reflection test failed.\n");
-		return;
-	}
-
-	unit_type = (versions >> 4) & 0x000f;
-	hardware_version = versions & 0x000f;
-	feature_rs232 = fpga_features & (1<<11);
-	feature_audio = (fpga_features >> 9) & 0x0003;
-	feature_sysclock = (fpga_features >> 7) & 0x0003;
-	feature_ramconfig = (fpga_features >> 5) & 0x0003;
-	feature_carrier_speed = fpga_features & (1<<4);
-	feature_carriers = (fpga_features >> 2) & 0x0003;
-	feature_video_channels = fpga_features & 0x0003;
-
-	if (unit_type & UNITTYPE_MAIN)
-		printf("Mainchannel ");
-	else
-		printf("Videochannel ");
-
-	if (unit_type & UNITTYPE_SERVER)
-		printf("Serverside ");
-	else
-		printf("Userside ");
-
-	if (unit_type & UNITTYPE_DISPLAYPORT)
-		printf("DisplayPort");
-	else
-		printf("DVI-DL");
-
-	switch (hardware_version) {
-	case HWVER_101:
-		printf(" HW-Ver 1.01\n");
-		break;
-
-	case HWVER_110:
-		printf(" HW-Ver 1.10-1.20\n");
-		break;
-
-	case HWVER_130:
-		printf(" HW-Ver 1.30\n");
-		break;
-
-	case HWVER_140:
-		printf(" HW-Ver 1.40-1.43\n");
-		break;
-
-	case HWVER_150:
-		printf(" HW-Ver 1.50\n");
-		break;
-
-	case HWVER_160:
-		printf(" HW-Ver 1.60-1.61\n");
-		break;
-
-	case HWVER_170:
-		printf(" HW-Ver 1.70\n");
-		break;
-
-	default:
-		printf(" HW-Ver %d(not supported)\n",
-		       hardware_version);
-		break;
-	}
-
-	printf("       FPGA V %d.%02d, features:",
-		fpga_version / 100, fpga_version % 100);
-
-	printf(" %sRS232", feature_rs232 ? "" : "no ");
-
-	switch (feature_audio) {
-	case AUDIO_NONE:
-		printf(", no audio");
-		break;
-
-	case AUDIO_TX:
-		printf(", audio tx");
-		break;
-
-	case AUDIO_RX:
-		printf(", audio rx");
-		break;
-
-	case AUDIO_RXTX:
-		printf(", audio rx+tx");
-		break;
-
-	default:
-		printf(", audio %d(not supported)", feature_audio);
-		break;
-	}
-
-	switch (feature_sysclock) {
-	case SYSCLK_156250:
-		printf(", clock 156.25 MHz");
-		break;
-
-	default:
-		printf(", clock %d(not supported)", feature_sysclock);
-		break;
-	}
-
-	puts(",\n       ");
-
-	switch (feature_ramconfig) {
-	case RAM_NONE:
-		printf("no RAM");
-		break;
-
-	case RAM_DDR2_32:
-		printf("RAM 32 bit DDR2");
-		break;
-
-	case RAM_DDR2_64:
-		printf("RAM 64 bit DDR2");
-		break;
-
-	default:
-		printf("RAM %d(not supported)", feature_ramconfig);
-		break;
-	}
-
-	printf(", %d carrier(s) %s", feature_carriers,
-		feature_carrier_speed ? "10 Gbit/s" : "of unknown speed");
-
-	printf(", %d video channel(s)\n", feature_video_channels);
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-	puts("Board: ");
-
-	puts("DLVision 10G");
-
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-
-	puts("\n");
-
-	return 0;
-}
-
-int last_stage_init(void)
-{
-	u16 versions;
-
-	FPGA_GET_REG(0, versions, &versions);
-
-	print_fpga_info(0);
-	if (get_mc2_present())
-		print_fpga_info(1);
-
-	if (((versions >> 4) & 0x000f) & UNITTYPE_SERVER)
-		return 0;
-
-	if (!get_fpga_state(0) || (get_hwver() == HWVER_101))
-		osd_probe(0);
-
-	if (get_mc2_present() &&
-	    (!get_fpga_state(1) || (get_hwver() == HWVER_101)))
-		osd_probe(1);
-
-	return 0;
-}
-
-void gd405ep_init(void)
-{
-}
-
-void gd405ep_set_fpga_reset(unsigned state)
-{
-	if (state) {
-		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
-		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
-	} else {
-		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
-		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
-	}
-}
-
-void gd405ep_setup_hw(void)
-{
-	/*
-	 * set "startup-finished"-gpios
-	 */
-	gpio_write_bit(21, 0);
-	gpio_write_bit(22, 1);
-}
-
-int gd405ep_get_fpga_done(unsigned fpga)
-{
-	return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
-}
diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c
deleted file mode 100644
index 1484469..0000000
--- a/board/gdsys/405ep/io.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * (C) Copyright 2010
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-
-#include <miiphy.h>
-
-#include "405ep.h"
-#include <gdsys_fpga.h>
-
-#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
-#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
-#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-
-#define PHYREG_CONTROL				0
-#define PHYREG_PAGE_ADDRESS			22
-#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1	16
-#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2	26
-
-enum {
-	UNITTYPE_CCD_SWITCH = 1,
-};
-
-enum {
-	HWVER_100 = 0,
-	HWVER_110 = 1,
-	HWVER_121 = 2,
-	HWVER_122 = 3,
-};
-
-struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
-
-int misc_init_r(void)
-{
-	/*
-	 * Note: DTT has been removed. Please use UCLASS_THERMAL.
-	 *
-	 * startup fans
-	 *
-	 * dtt_init();
-	 */
-
-	return 0;
-}
-
-int configure_gbit_phy(unsigned char addr)
-{
-	unsigned short value;
-
-	/* select page 2 */
-	if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
-		PHYREG_PAGE_ADDRESS, 0x0002))
-		goto err_out;
-	/* disable SGMII autonegotiation */
-	if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
-		PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2, 0x800a))
-		goto err_out;
-	/* select page 0 */
-	if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
-		PHYREG_PAGE_ADDRESS, 0x0000))
-		goto err_out;
-	/* switch from powerdown to normal operation */
-	if (miiphy_read(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
-		PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, &value))
-		goto err_out;
-	if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
-		PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, value & ~0x0004))
-		goto err_out;
-	/* reset phy so settings take effect */
-	if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
-		PHYREG_CONTROL, 0x9140))
-		goto err_out;
-
-	return 0;
-
-err_out:
-	printf("Error writing to the PHY addr=%02x\n", addr);
-	return -1;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-	puts("Board: CATCenter Io");
-
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-
-	puts("\n");
-
-	return 0;
-}
-
-static void print_fpga_info(void)
-{
-	u16 versions;
-	u16 fpga_version;
-	u16 fpga_features;
-	unsigned unit_type;
-	unsigned hardware_version;
-	unsigned feature_channels;
-	unsigned feature_expansion;
-
-	FPGA_GET_REG(0, versions, &versions);
-	FPGA_GET_REG(0, fpga_version, &fpga_version);
-	FPGA_GET_REG(0, fpga_features, &fpga_features);
-
-	unit_type = (versions & 0xf000) >> 12;
-	hardware_version = versions & 0x000f;
-	feature_channels = fpga_features & 0x007f;
-	feature_expansion = fpga_features & (1<<15);
-
-	puts("FPGA:  ");
-
-	switch (unit_type) {
-	case UNITTYPE_CCD_SWITCH:
-		printf("CCD-Switch");
-		break;
-
-	default:
-		printf("UnitType %d(not supported)", unit_type);
-		break;
-	}
-
-	switch (hardware_version) {
-	case HWVER_100:
-		printf(" HW-Ver 1.00\n");
-		break;
-
-	case HWVER_110:
-		printf(" HW-Ver 1.10\n");
-		break;
-
-	case HWVER_121:
-		printf(" HW-Ver 1.21\n");
-		break;
-
-	case HWVER_122:
-		printf(" HW-Ver 1.22\n");
-		break;
-
-	default:
-		printf(" HW-Ver %d(not supported)\n",
-		       hardware_version);
-		break;
-	}
-
-	printf("       FPGA V %d.%02d, features:",
-		fpga_version / 100, fpga_version % 100);
-
-	printf(" %d channel(s)", feature_channels);
-
-	printf(", expansion %ssupported\n", feature_expansion ? "" : "un");
-}
-
-/*
- * setup Gbit PHYs
- */
-int last_stage_init(void)
-{
-	unsigned int k;
-
-	print_fpga_info();
-
-	int retval;
-	struct mii_dev *mdiodev = mdio_alloc();
-	if (!mdiodev)
-		return -ENOMEM;
-	strncpy(mdiodev->name, CONFIG_SYS_GBIT_MII_BUSNAME, MDIO_NAME_LEN);
-	mdiodev->read = bb_miiphy_read;
-	mdiodev->write = bb_miiphy_write;
-
-	retval = mdio_register(mdiodev);
-	if (retval < 0)
-		return retval;
-
-	for (k = 0; k < 32; ++k)
-		configure_gbit_phy(k);
-
-	/* take fpga serdes blocks out of reset */
-	FPGA_SET_REG(0, quad_serdes_reset, 0);
-
-	return 0;
-}
-
-void gd405ep_init(void)
-{
-}
-
-void gd405ep_set_fpga_reset(unsigned state)
-{
-	if (state) {
-		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
-		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
-	} else {
-		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
-		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
-	}
-}
-
-void gd405ep_setup_hw(void)
-{
-	/*
-	 * set "startup-finished"-gpios
-	 */
-	gpio_write_bit(21, 0);
-	gpio_write_bit(22, 1);
-}
-
-int gd405ep_get_fpga_done(unsigned fpga)
-{
-	return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
-}
diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c
deleted file mode 100644
index 7db0e29..0000000
--- a/board/gdsys/405ep/iocon.c
+++ /dev/null
@@ -1,673 +0,0 @@
-/*
- * (C) Copyright 2010
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-
-#include "405ep.h"
-#include <gdsys_fpga.h>
-
-#include "../common/osd.h"
-#include "../common/mclink.h"
-#include "../common/phy.h"
-
-#include <i2c.h>
-#include <pca953x.h>
-#include <pca9698.h>
-
-#include <miiphy.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
-#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
-#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-
-#define MAX_MUX_CHANNELS 2
-
-enum {
-	UNITTYPE_MAIN_SERVER = 0,
-	UNITTYPE_MAIN_USER = 1,
-	UNITTYPE_VIDEO_SERVER = 2,
-	UNITTYPE_VIDEO_USER = 3,
-};
-
-enum {
-	HWVER_100 = 0,
-	HWVER_104 = 1,
-	HWVER_110 = 2,
-	HWVER_120 = 3,
-	HWVER_200 = 4,
-	HWVER_210 = 5,
-	HWVER_220 = 6,
-	HWVER_230 = 7,
-};
-
-enum {
-	FPGA_HWVER_200 = 0,
-	FPGA_HWVER_210 = 1,
-};
-
-enum {
-	COMPRESSION_NONE = 0,
-	COMPRESSION_TYPE1_DELTA = 1,
-	COMPRESSION_TYPE1_TYPE2_DELTA = 3,
-};
-
-enum {
-	AUDIO_NONE = 0,
-	AUDIO_TX = 1,
-	AUDIO_RX = 2,
-	AUDIO_RXTX = 3,
-};
-
-enum {
-	SYSCLK_147456 = 0,
-};
-
-enum {
-	RAM_DDR2_32 = 0,
-	RAM_DDR3_32 = 1,
-};
-
-enum {
-	CARRIER_SPEED_1G = 0,
-	CARRIER_SPEED_2_5G = 1,
-};
-
-enum {
-	MCFPGA_DONE = 1 << 0,
-	MCFPGA_INIT_N = 1 << 1,
-	MCFPGA_PROGRAM_N = 1 << 2,
-	MCFPGA_UPDATE_ENABLE_N = 1 << 3,
-	MCFPGA_RESET_N = 1 << 4,
-};
-
-enum {
-	GPIO_MDC = 1 << 14,
-	GPIO_MDIO = 1 << 15,
-};
-
-unsigned int mclink_fpgacount;
-struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
-
-int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
-{
-	int res;
-
-	switch (fpga) {
-	case 0:
-		out_le16(reg, data);
-		break;
-	default:
-		res = mclink_send(fpga - 1, regoff, data);
-		if (res < 0) {
-			printf("mclink_send reg %02lx data %04x returned %d\n",
-			       regoff, data, res);
-			return res;
-		}
-		break;
-	}
-
-	return 0;
-}
-
-int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data)
-{
-	int res;
-
-	switch (fpga) {
-	case 0:
-		*data = in_le16(reg);
-		break;
-	default:
-		if (fpga > mclink_fpgacount)
-			return -EINVAL;
-		res = mclink_receive(fpga - 1, regoff, data);
-		if (res < 0) {
-			printf("mclink_receive reg %02lx returned %d\n",
-			       regoff, res);
-			return res;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-	puts("Board: ");
-
-	puts("IoCon");
-
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-
-	puts("\n");
-
-	return 0;
-}
-
-static void print_fpga_info(unsigned int fpga, bool rgmii2_present)
-{
-	u16 versions;
-	u16 fpga_version;
-	u16 fpga_features;
-	unsigned unit_type;
-	unsigned hardware_version;
-	unsigned feature_compression;
-	unsigned feature_osd;
-	unsigned feature_audio;
-	unsigned feature_sysclock;
-	unsigned feature_ramconfig;
-	unsigned feature_carrier_speed;
-	unsigned feature_carriers;
-	unsigned feature_video_channels;
-
-	int legacy = get_fpga_state(fpga) & FPGA_STATE_PLATFORM;
-
-	FPGA_GET_REG(fpga, versions, &versions);
-	FPGA_GET_REG(fpga, fpga_version, &fpga_version);
-	FPGA_GET_REG(fpga, fpga_features, &fpga_features);
-
-	unit_type = (versions & 0xf000) >> 12;
-	feature_compression = (fpga_features & 0xe000) >> 13;
-	feature_osd = fpga_features & (1<<11);
-	feature_audio = (fpga_features & 0x0600) >> 9;
-	feature_sysclock = (fpga_features & 0x0180) >> 7;
-	feature_ramconfig = (fpga_features & 0x0060) >> 5;
-	feature_carrier_speed = fpga_features & (1<<4);
-	feature_carriers = (fpga_features & 0x000c) >> 2;
-	feature_video_channels = fpga_features & 0x0003;
-
-	if (legacy)
-		printf("legacy ");
-
-	switch (unit_type) {
-	case UNITTYPE_MAIN_USER:
-		printf("Mainchannel");
-		break;
-
-	case UNITTYPE_VIDEO_USER:
-		printf("Videochannel");
-		break;
-
-	default:
-		printf("UnitType %d(not supported)", unit_type);
-		break;
-	}
-
-	if (unit_type == UNITTYPE_MAIN_USER) {
-		if (legacy)
-			hardware_version =
-				(in_le16((void *)LATCH2_BASE)>>8) & 0x0f;
-		else
-			hardware_version =
-				  (!!pca9698_get_value(0x20, 24) << 0)
-				| (!!pca9698_get_value(0x20, 25) << 1)
-				| (!!pca9698_get_value(0x20, 26) << 2)
-				| (!!pca9698_get_value(0x20, 27) << 3);
-		switch (hardware_version) {
-		case HWVER_100:
-			printf(" HW-Ver 1.00,");
-			break;
-
-		case HWVER_104:
-			printf(" HW-Ver 1.04,");
-			break;
-
-		case HWVER_110:
-			printf(" HW-Ver 1.10,");
-			break;
-
-		case HWVER_120:
-			printf(" HW-Ver 1.20-1.21,");
-			break;
-
-		case HWVER_200:
-			printf(" HW-Ver 2.00,");
-			break;
-
-		case HWVER_210:
-			printf(" HW-Ver 2.10,");
-			break;
-
-		case HWVER_220:
-			printf(" HW-Ver 2.20,");
-			break;
-
-		case HWVER_230:
-			printf(" HW-Ver 2.30,");
-			break;
-
-		default:
-			printf(" HW-Ver %d(not supported),",
-			       hardware_version);
-			break;
-		}
-		if (rgmii2_present)
-			printf(" RGMII2,");
-	}
-
-	if (unit_type == UNITTYPE_VIDEO_USER) {
-		hardware_version = versions & 0x000f;
-		switch (hardware_version) {
-		case FPGA_HWVER_200:
-			printf(" HW-Ver 2.00,");
-			break;
-
-		case FPGA_HWVER_210:
-			printf(" HW-Ver 2.10,");
-			break;
-
-		default:
-			printf(" HW-Ver %d(not supported),",
-			       hardware_version);
-			break;
-		}
-	}
-
-	printf(" FPGA V %d.%02d\n       features:",
-	       fpga_version / 100, fpga_version % 100);
-
-
-	switch (feature_compression) {
-	case COMPRESSION_NONE:
-		printf(" no compression");
-		break;
-
-	case COMPRESSION_TYPE1_DELTA:
-		printf(" type1-deltacompression");
-		break;
-
-	case COMPRESSION_TYPE1_TYPE2_DELTA:
-		printf(" type1-deltacompression, type2-inlinecompression");
-		break;
-
-	default:
-		printf(" compression %d(not supported)", feature_compression);
-		break;
-	}
-
-	printf(", %sosd", feature_osd ? "" : "no ");
-
-	switch (feature_audio) {
-	case AUDIO_NONE:
-		printf(", no audio");
-		break;
-
-	case AUDIO_TX:
-		printf(", audio tx");
-		break;
-
-	case AUDIO_RX:
-		printf(", audio rx");
-		break;
-
-	case AUDIO_RXTX:
-		printf(", audio rx+tx");
-		break;
-
-	default:
-		printf(", audio %d(not supported)", feature_audio);
-		break;
-	}
-
-	puts(",\n       ");
-
-	switch (feature_sysclock) {
-	case SYSCLK_147456:
-		printf("clock 147.456 MHz");
-		break;
-
-	default:
-		printf("clock %d(not supported)", feature_sysclock);
-		break;
-	}
-
-	switch (feature_ramconfig) {
-	case RAM_DDR2_32:
-		printf(", RAM 32 bit DDR2");
-		break;
-
-	case RAM_DDR3_32:
-		printf(", RAM 32 bit DDR3");
-		break;
-
-	default:
-		printf(", RAM %d(not supported)", feature_ramconfig);
-		break;
-	}
-
-	printf(", %d carrier(s) %s", feature_carriers,
-	       feature_carrier_speed ? "2.5Gbit/s" : "1Gbit/s");
-
-	printf(", %d video channel(s)\n", feature_video_channels);
-}
-
-int last_stage_init(void)
-{
-	int slaves;
-	unsigned int k;
-	unsigned int mux_ch;
-	unsigned char mclink_controllers[] = { 0x24, 0x25, 0x26 };
-	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
-	u16 fpga_features;
-	int feature_carrier_speed;
-	bool ch0_rgmii2_present = false;
-
-	FPGA_GET_REG(0, fpga_features, &fpga_features);
-	feature_carrier_speed = fpga_features & (1<<4);
-
-	if (!legacy) {
-		/* Turn on Parade DP501 */
-		pca9698_direction_output(0x20, 9, 1);
-
-		ch0_rgmii2_present = !pca9698_get_value(0x20, 30);
-	}
-
-	/* wait for FPGA done; then reset FPGA */
-	for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) {
-		unsigned int ctr = 0;
-
-		if (i2c_probe(mclink_controllers[k]))
-			continue;
-
-		while (!(pca953x_get_val(mclink_controllers[k])
-		       & MCFPGA_DONE)) {
-			udelay(100000);
-			if (ctr++ > 5) {
-				printf("no done for mclink_controller %d\n", k);
-				break;
-			}
-		}
-
-		pca953x_set_dir(mclink_controllers[k], MCFPGA_RESET_N, 0);
-		pca953x_set_val(mclink_controllers[k], MCFPGA_RESET_N, 0);
-		udelay(10);
-		pca953x_set_val(mclink_controllers[k], MCFPGA_RESET_N,
-				MCFPGA_RESET_N);
-	}
-
-	if (!legacy && (feature_carrier_speed == CARRIER_SPEED_1G)) {
-		int retval;
-		struct mii_dev *mdiodev = mdio_alloc();
-		if (!mdiodev)
-			return -ENOMEM;
-		strncpy(mdiodev->name, bb_miiphy_buses[0].name, MDIO_NAME_LEN);
-		mdiodev->read = bb_miiphy_read;
-		mdiodev->write = bb_miiphy_write;
-
-		retval = mdio_register(mdiodev);
-		if (retval < 0)
-			return retval;
-		for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) {
-			if ((mux_ch == 1) && !ch0_rgmii2_present)
-				continue;
-
-			setup_88e1518(bb_miiphy_buses[0].name, mux_ch);
-		}
-	}
-
-	/* give slave-PLLs and Parade DP501 some time to be up and running */
-	udelay(500000);
-
-	mclink_fpgacount = CONFIG_SYS_MCLINK_MAX;
-	slaves = mclink_probe();
-	mclink_fpgacount = 0;
-
-	print_fpga_info(0, ch0_rgmii2_present);
-	osd_probe(0);
-
-	if (slaves <= 0)
-		return 0;
-
-	mclink_fpgacount = slaves;
-
-	for (k = 1; k <= slaves; ++k) {
-		FPGA_GET_REG(k, fpga_features, &fpga_features);
-		feature_carrier_speed = fpga_features & (1<<4);
-
-		print_fpga_info(k, false);
-		osd_probe(k);
-		if (feature_carrier_speed == CARRIER_SPEED_1G) {
-			int retval;
-			struct mii_dev *mdiodev = mdio_alloc();
-			if (!mdiodev)
-				return -ENOMEM;
-			strncpy(mdiodev->name, bb_miiphy_buses[k].name,
-				MDIO_NAME_LEN);
-			mdiodev->read = bb_miiphy_read;
-			mdiodev->write = bb_miiphy_write;
-
-			retval = mdio_register(mdiodev);
-			if (retval < 0)
-				return retval;
-			setup_88e1518(bb_miiphy_buses[k].name, 0);
-		}
-	}
-
-	return 0;
-}
-
-/*
- * provide access to fpga gpios (for I2C bitbang)
- * (these may look all too simple but make iocon.h much more readable)
- */
-void fpga_gpio_set(unsigned int bus, int pin)
-{
-	FPGA_SET_REG(bus, gpio.set, pin);
-}
-
-void fpga_gpio_clear(unsigned int bus, int pin)
-{
-	FPGA_SET_REG(bus, gpio.clear, pin);
-}
-
-int fpga_gpio_get(unsigned int bus, int pin)
-{
-	u16 val;
-
-	FPGA_GET_REG(bus, gpio.read, &val);
-
-	return val & pin;
-}
-
-void gd405ep_init(void)
-{
-	unsigned int k;
-
-	if (i2c_probe(0x20)) { /* i2c_probe returns 0 on success */
-		for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
-			gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM;
-	} else {
-		pca9698_direction_output(0x20, 4, 1);
-	}
-}
-
-void gd405ep_set_fpga_reset(unsigned state)
-{
-	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
-
-	if (legacy) {
-		if (state) {
-			out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
-			out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
-		} else {
-			out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
-			out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
-		}
-	} else {
-		pca9698_set_value(0x20, 4, state ? 0 : 1);
-	}
-}
-
-void gd405ep_setup_hw(void)
-{
-	/*
-	 * set "startup-finished"-gpios
-	 */
-	gpio_write_bit(21, 0);
-	gpio_write_bit(22, 1);
-}
-
-int gd405ep_get_fpga_done(unsigned fpga)
-{
-	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
-
-	if (legacy)
-		return in_le16((void *)LATCH2_BASE)
-		       & CONFIG_SYS_FPGA_DONE(fpga);
-	else
-		return pca9698_get_value(0x20, 20);
-}
-
-/*
- * FPGA MII bitbang implementation
- */
-
-struct fpga_mii {
-	unsigned fpga;
-	int mdio;
-} fpga_mii[] = {
-	{ 0, 1},
-	{ 1, 1},
-	{ 2, 1},
-	{ 3, 1},
-};
-
-static int mii_dummy_init(struct bb_miiphy_bus *bus)
-{
-	return 0;
-}
-
-static int mii_mdio_active(struct bb_miiphy_bus *bus)
-{
-	struct fpga_mii *fpga_mii = bus->priv;
-
-	if (fpga_mii->mdio)
-		FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
-	else
-		FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);
-
-	return 0;
-}
-
-static int mii_mdio_tristate(struct bb_miiphy_bus *bus)
-{
-	struct fpga_mii *fpga_mii = bus->priv;
-
-	FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
-
-	return 0;
-}
-
-static int mii_set_mdio(struct bb_miiphy_bus *bus, int v)
-{
-	struct fpga_mii *fpga_mii = bus->priv;
-
-	if (v)
-		FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
-	else
-		FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);
-
-	fpga_mii->mdio = v;
-
-	return 0;
-}
-
-static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v)
-{
-	u16 gpio;
-	struct fpga_mii *fpga_mii = bus->priv;
-
-	FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio);
-
-	*v = ((gpio & GPIO_MDIO) != 0);
-
-	return 0;
-}
-
-static int mii_set_mdc(struct bb_miiphy_bus *bus, int v)
-{
-	struct fpga_mii *fpga_mii = bus->priv;
-
-	if (v)
-		FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC);
-	else
-		FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC);
-
-	return 0;
-}
-
-static int mii_delay(struct bb_miiphy_bus *bus)
-{
-	udelay(1);
-
-	return 0;
-}
-
-struct bb_miiphy_bus bb_miiphy_buses[] = {
-	{
-		.name = "board0",
-		.init = mii_dummy_init,
-		.mdio_active = mii_mdio_active,
-		.mdio_tristate = mii_mdio_tristate,
-		.set_mdio = mii_set_mdio,
-		.get_mdio = mii_get_mdio,
-		.set_mdc = mii_set_mdc,
-		.delay = mii_delay,
-		.priv = &fpga_mii[0],
-	},
-	{
-		.name = "board1",
-		.init = mii_dummy_init,
-		.mdio_active = mii_mdio_active,
-		.mdio_tristate = mii_mdio_tristate,
-		.set_mdio = mii_set_mdio,
-		.get_mdio = mii_get_mdio,
-		.set_mdc = mii_set_mdc,
-		.delay = mii_delay,
-		.priv = &fpga_mii[1],
-	},
-	{
-		.name = "board2",
-		.init = mii_dummy_init,
-		.mdio_active = mii_mdio_active,
-		.mdio_tristate = mii_mdio_tristate,
-		.set_mdio = mii_set_mdio,
-		.get_mdio = mii_get_mdio,
-		.set_mdc = mii_set_mdc,
-		.delay = mii_delay,
-		.priv = &fpga_mii[2],
-	},
-	{
-		.name = "board3",
-		.init = mii_dummy_init,
-		.mdio_active = mii_mdio_active,
-		.mdio_tristate = mii_mdio_tristate,
-		.set_mdio = mii_set_mdio,
-		.get_mdio = mii_get_mdio,
-		.set_mdc = mii_set_mdc,
-		.delay = mii_delay,
-		.priv = &fpga_mii[3],
-	},
-};
-
-int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
-			  sizeof(bb_miiphy_buses[0]);
diff --git a/board/gdsys/405ep/neo.c b/board/gdsys/405ep/neo.c
deleted file mode 100644
index ad88af2..0000000
--- a/board/gdsys/405ep/neo.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * (C) Copyright 2011
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-
-#include "405ep.h"
-#include <gdsys_fpga.h>
-
-#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
-#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
-#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-
-enum {
-	UNITTYPE_CCX16 = 1,
-	UNITTYPE_CCIP216 = 2,
-};
-
-enum {
-	HWVER_300 = 3,
-};
-
-struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
-
-int misc_init_r(void)
-{
-	/*
-	 * Note: DTT has been removed. Please use UCLASS_THERMAL.
-	 *
-	 * startup fans
-	 *
-	 * dtt_init();
-	 */
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-	puts("Board: CATCenter Neo");
-
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-
-	puts("\n");
-
-	return 0;
-}
-
-static void print_fpga_info(void)
-{
-	u16 versions;
-	u16 fpga_version;
-	u16 fpga_features;
-	int fpga_state = get_fpga_state(0);
-	unsigned unit_type;
-	unsigned hardware_version;
-	unsigned feature_channels;
-
-	puts("FPGA:  ");
-	if (fpga_state & FPGA_STATE_DONE_FAILED) {
-		printf(" done timed out\n");
-		return;
-	}
-
-	if (fpga_state & FPGA_STATE_REFLECTION_FAILED) {
-		printf(" refelectione test failed\n");
-		return;
-	}
-
-	FPGA_GET_REG(0, versions, &versions);
-	FPGA_GET_REG(0, fpga_version, &fpga_version);
-	FPGA_GET_REG(0, fpga_features, &fpga_features);
-
-	unit_type = (versions & 0xf000) >> 12;
-	hardware_version = versions & 0x000f;
-	feature_channels = fpga_features & 0x007f;
-
-	switch (unit_type) {
-	case UNITTYPE_CCX16:
-		printf("CCX-Switch");
-		break;
-
-	default:
-		printf("UnitType %d(not supported)", unit_type);
-		break;
-	}
-
-	switch (hardware_version) {
-	case HWVER_300:
-		printf(" HW-Ver 3.00-3.12\n");
-		break;
-
-	default:
-		printf(" HW-Ver %d(not supported)\n",
-		       hardware_version);
-		break;
-	}
-
-	printf("       FPGA V %d.%02d, features:",
-		fpga_version / 100, fpga_version % 100);
-
-	printf(" %d channel(s)\n", feature_channels);
-}
-
-int last_stage_init(void)
-{
-	print_fpga_info();
-
-	return 0;
-}
-
-void gd405ep_init(void)
-{
-}
-
-void gd405ep_set_fpga_reset(unsigned state)
-{
-	if (state) {
-		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
-		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
-	} else {
-		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
-		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
-	}
-}
-
-void gd405ep_setup_hw(void)
-{
-	/*
-	 * set "startup-finished"-gpios
-	 */
-	gpio_write_bit(21, 0);
-	gpio_write_bit(22, 1);
-}
-
-int gd405ep_get_fpga_done(unsigned fpga)
-{
-	/*
-	 * Neo hardware has no FPGA-DONE GPIO
-	 */
-	return 1;
-}
diff --git a/board/gdsys/405ex/405ex.c b/board/gdsys/405ex/405ex.c
deleted file mode 100644
index 9e1c57f..0000000
--- a/board/gdsys/405ex/405ex.c
+++ /dev/null
@@ -1,244 +0,0 @@
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc405.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#include <gdsys_fpga.h>
-
-#include "405ex.h"
-
-#define REFLECTION_TESTPATTERN 0xdede
-#define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff)
-
-#ifdef CONFIG_SYS_FPGA_NO_RFL_HI
-#define REFLECTION_TESTREG reflection_low
-#else
-#define REFLECTION_TESTREG reflection_high
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int get_fpga_state(unsigned dev)
-{
-	return gd->arch.fpga_state[dev];
-}
-
-int board_early_init_f(void)
-{
-	u32 val;
-
-	/*--------------------------------------------------------------------+
-	 | Interrupt controller setup
-	 +--------------------------------------------------------------------+
-	+---------------------------------------------------------------------+
-	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
-	+---------+-----------------------------------+-------+-------+-------+
-	| IRQ 00  | UART0                             | High  | Level | Non   |
-	| IRQ 01  | UART1                             | High  | Level | Non   |
-	| IRQ 02  | IIC0                              | High  | Level | Non   |
-	| IRQ 03  | TBD                               | High  | Level | Non   |
-	| IRQ 04  | TBD                               | High  | Level | Non   |
-	| IRQ 05  | EBM                               | High  | Level | Non   |
-	| IRQ 06  | BGI                               | High  | Level | Non   |
-	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
-	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
-	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
-	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
-	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
-	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
-	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
-	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
-	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
-	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
-	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
-	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
-	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
-	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
-	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
-	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
-	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
-	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
-	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
-	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
-	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
-	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
-	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
-	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
-	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
-	|----------------------------------------------------------------------
-	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
-	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
-	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
-	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
-	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
-	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
-	| IRQ 38  | NDFC                              | High  | Level | Non   |
-	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
-	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
-	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
-	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
-	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
-	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
-	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
-	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
-	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
-	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
-	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
-	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
-	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
-	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
-	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
-	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
-	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
-	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
-	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
-	|----------------------------------------------------------------------
-	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
-	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
-	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
-	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
-	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
-	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
-	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
-	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
-	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
-	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
-	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
-	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
-	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
-	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
-	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
-	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
-	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
-	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
-	|---------------------------------------------------------------------
-	+---------+-----------------------------------+-------+-------+------*/
-	/*--------------------------------------------------------------------+
-	 | Initialise UIC registers.  Clear all interrupts.  Disable all
-	 | interrupts.
-	 | Set critical interrupt values.  Set interrupt polarities.  Set
-	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
-	 | interrupts again.
-	 +-------------------------------------------------------------------*/
-
-	mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */
-	mtdcr(UIC2ER, 0x00000000); /* disable all interrupts */
-	mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */
-	mtdcr(UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */
-	mtdcr(UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */
-	mtdcr(UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
-	mtdcr(UIC2SR, 0x00000000); /* clear all interrupts */
-	mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */
-
-	mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts */
-	mtdcr(UIC1ER, 0x00000000); /* disable all interrupts */
-	mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */
-	mtdcr(UIC1PR, 0xfffac785); /* Set Interrupt Polarities */
-	mtdcr(UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */
-	mtdcr(UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
-	mtdcr(UIC1SR, 0x00000000); /* clear all interrupts */
-	mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts */
-
-	mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */
-	mtdcr(UIC0ER, 0x0000000a); /* Disable all interrupts */
-				   /* Except cascade UIC0 and UIC1 */
-	mtdcr(UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */
-	mtdcr(UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */
-	mtdcr(UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */
-	mtdcr(UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
-	mtdcr(UIC0SR, 0x00000000); /* clear all interrupts */
-	mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts */
-
-	/*
-	 * Note: Some cores are still in reset when the chip starts, so
-	 * take them out of reset
-	 */
-	mtsdr(SDR0_SRST, 0);
-
-	/*
-	 * Configure PFC (Pin Function Control) registers
-	 */
-	val = SDR0_PFC1_GPT_FREQ;
-	mtsdr(SDR0_PFC1, val);
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	unsigned k;
-	unsigned ctr;
-
-	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
-		gd->arch.fpga_state[k] = 0;
-
-	/*
-	 * reset FPGA
-	 */
-	gd405ex_init();
-
-	gd405ex_set_fpga_reset(1);
-
-	gd405ex_setup_hw();
-
-	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
-		ctr = 0;
-		while (!gd405ex_get_fpga_done(k)) {
-			udelay(100000);
-			if (ctr++ > 5) {
-				gd->arch.fpga_state[k] |=
-					FPGA_STATE_DONE_FAILED;
-				break;
-			}
-		}
-	}
-
-	udelay(10);
-
-	gd405ex_set_fpga_reset(0);
-
-	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
-		/*
-		 * wait for fpga out of reset
-		 */
-		ctr = 0;
-		while (1) {
-			u16 val;
-
-			FPGA_SET_REG(k, reflection_low, REFLECTION_TESTPATTERN);
-
-			FPGA_GET_REG(k, REFLECTION_TESTREG, &val);
-			if (val == REFLECTION_TESTPATTERN_INV)
-				break;
-
-			udelay(100000);
-			if (ctr++ > 5) {
-				gd->arch.fpga_state[k] |=
-					FPGA_STATE_REFLECTION_FAILED;
-				break;
-			}
-		}
-	}
-
-	return 0;
-}
diff --git a/board/gdsys/405ex/405ex.h b/board/gdsys/405ex/405ex.h
deleted file mode 100644
index b15623f..0000000
--- a/board/gdsys/405ex/405ex.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __405EX_H_
-#define __405EX_H_
-
-/* functions to be provided by board implementation */
-void gd405ex_init(void);
-void gd405ex_set_fpga_reset(unsigned state);
-void gd405ex_setup_hw(void);
-int gd405ex_get_fpga_done(unsigned fpga);
-
-#endif /* __405EX_H_ */
diff --git a/board/gdsys/405ex/Kconfig b/board/gdsys/405ex/Kconfig
deleted file mode 100644
index 52a8d89..0000000
--- a/board/gdsys/405ex/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_IO64
-
-config SYS_BOARD
-	default "405ex"
-
-config SYS_VENDOR
-	default "gdsys"
-
-config SYS_CONFIG_NAME
-	default "io64"
-
-endif
diff --git a/board/gdsys/405ex/MAINTAINERS b/board/gdsys/405ex/MAINTAINERS
deleted file mode 100644
index 395b1ac..0000000
--- a/board/gdsys/405ex/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-405EX BOARD
-M:	Dirk Eibach <eibach@gdsys.de>
-S:	Maintained
-F:	board/gdsys/405ex/
-F:	include/configs/io64.h
-F:	configs/io64_defconfig
diff --git a/board/gdsys/405ex/Makefile b/board/gdsys/405ex/Makefile
deleted file mode 100644
index a668460..0000000
--- a/board/gdsys/405ex/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y := 405ex.o
-obj-$(CONFIG_IO64) += io64.o
-obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
diff --git a/board/gdsys/405ex/chip_config.c b/board/gdsys/405ex/chip_config.c
deleted file mode 100644
index 37e76c4..0000000
--- a/board/gdsys/405ex/chip_config.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx_config.h>
-
-/* NAND booting versions differ in bytes: 6, 8, 9, 11, 12 */
-
-struct ppc4xx_config ppc4xx_config_val[] = {
-	{
-		"333-nor", "NOR  CPU: 333 PLB: 166 OPB:  83 EBC:  83",
-		{
-			0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"400-133-nor", "NOR  CPU: 400 PLB: 133 OPB:  66 EBC:  66",
-		{
-			0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"400-200-66-nor", "NOR  CPU: 400 PLB: 200 OPB:  66 EBC:  66",
-		{
-			0x8e, 0x0e, 0xe8, 0x12, 0xd8, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"400-nor", "NOR  CPU: 400 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"533-nor", "NOR  CPU: 533 PLB: 177 OPB:  88 EBC:  88",
-		{
-			0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"533-nand", "NOR  CPU: 533 PLB: 177 OPB:  88 EBC:  88",
-		{
-			0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0f, 0x00,
-			0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"600-nor", "NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"600-nand", "NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0f, 0x00,
-			0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"666-nor", "NOR  CPU: 666 PLB: 222 OPB: 111 EBC: 111",
-		{
-			0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
-			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-		}
-	},
-};
-
-int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c
deleted file mode 100644
index 9ef965bb..0000000
--- a/board/gdsys/405ex/io64.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * (C) Copyright 2010
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * based on kilauea.c
- * by Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc405.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <linux/errno.h>
-#include <asm/ppc4xx-gpio.h>
-#include <flash.h>
-
-#include <pca9698.h>
-
-#include "405ex.h"
-#include <gdsys_fpga.h>
-
-#include <miiphy.h>
-#include <i2c.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PHYREG_CONTROL				0
-#define PHYREG_PAGE_ADDRESS			22
-#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1	16
-#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2	26
-#define PHYREG_PG2_MAC_SPECIFIC_STATUS_1	17
-#define PHYREG_PG2_MAC_SPECIFIC_CONTROL		21
-
-#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
-#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
-#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-#define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300)
-
-enum {
-	UNITTYPE_CCD_SWITCH = 1,
-};
-
-enum {
-	HWVER_100 = 0,
-	HWVER_110 = 1,
-};
-
-struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
-
-static inline void blank_string(int size)
-{
-	int i;
-
-	for (i = 0; i < size; i++)
-		putc('\b');
-	for (i = 0; i < size; i++)
-		putc(' ');
-	for (i = 0; i < size; i++)
-		putc('\b');
-}
-
-/*
- * Board early initialization function
- */
-int misc_init_r(void)
-{
-	/*
-	 * Note: DTT has been removed. Please use UCLASS_THERMAL.
-	 *
-	 * startup fans
-	 *
-	 * dtt_init();
-	 */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-	/* Monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      -CONFIG_SYS_MONITOR_LEN,
-		      0xffffffff,
-		      &flash_info[0]);
-#endif
-
-	return 0;
-}
-
-static void print_fpga_info(unsigned dev)
-{
-	u16 versions;
-	u16 fpga_version;
-	u16 fpga_features;
-	int fpga_state = get_fpga_state(dev);
-
-	unsigned unit_type;
-	unsigned hardware_version;
-	unsigned feature_channels;
-	unsigned feature_expansion;
-
-	FPGA_GET_REG(dev, versions, &versions);
-	FPGA_GET_REG(dev, fpga_version, &fpga_version);
-	FPGA_GET_REG(dev, fpga_features, &fpga_features);
-
-	printf("FPGA%d: ", dev);
-	if (fpga_state & FPGA_STATE_PLATFORM)
-		printf("(legacy) ");
-
-	if (fpga_state & FPGA_STATE_DONE_FAILED) {
-		printf(" done timed out\n");
-		return;
-	}
-
-	if (fpga_state & FPGA_STATE_REFLECTION_FAILED) {
-		printf(" refelectione test failed\n");
-		return;
-	}
-
-	unit_type = (versions & 0xf000) >> 12;
-	hardware_version = versions & 0x000f;
-	feature_channels = fpga_features & 0x007f;
-	feature_expansion = fpga_features & (1<<15);
-
-	switch (unit_type) {
-	case UNITTYPE_CCD_SWITCH:
-		printf("CCD-Switch");
-		break;
-
-	default:
-		printf("UnitType %d(not supported)", unit_type);
-		break;
-	}
-
-	switch (hardware_version) {
-	case HWVER_100:
-		printf(" HW-Ver 1.00\n");
-		break;
-
-	case HWVER_110:
-		printf(" HW-Ver 1.10\n");
-		break;
-
-	default:
-		printf(" HW-Ver %d(not supported)\n",
-		       hardware_version);
-		break;
-	}
-
-	printf("       FPGA V %d.%02d, features:",
-		fpga_version / 100, fpga_version % 100);
-
-	printf(" %d channel(s)", feature_channels);
-
-	printf(", expansion %ssupported\n", feature_expansion ? "" : "un");
-}
-
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-
-	printf("Board: CATCenter Io64\n");
-
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-
-	return 0;
-}
-
-int configure_gbit_phy(char *bus, unsigned char addr)
-{
-	unsigned short value;
-
-	/* select page 0 */
-	if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000))
-		goto err_out;
-	/* switch to powerdown */
-	if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
-		&value))
-		goto err_out;
-	if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
-		value | 0x0004))
-		goto err_out;
-	/* select page 2 */
-	if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002))
-		goto err_out;
-	/* disable SGMII autonegotiation */
-	if (miiphy_write(bus, addr, PHYREG_PG2_MAC_SPECIFIC_CONTROL, 48))
-		goto err_out;
-	/* select page 0 */
-	if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000))
-		goto err_out;
-	/* switch from powerdown to normal operation */
-	if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
-		&value))
-		goto err_out;
-	if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
-		value & ~0x0004))
-		goto err_out;
-	/* reset phy so settings take effect */
-	if (miiphy_write(bus, addr, PHYREG_CONTROL, 0x9140))
-		goto err_out;
-
-	return 0;
-
-err_out:
-	printf("Error writing to the PHY addr=%02x\n", addr);
-	return -1;
-}
-
-int verify_gbit_phy(char *bus, unsigned char addr)
-{
-	unsigned short value;
-
-	/* select page 2 */
-	if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002))
-		goto err_out;
-	/* verify SGMII link status */
-	if (miiphy_read(bus, addr, PHYREG_PG2_MAC_SPECIFIC_STATUS_1, &value))
-		goto err_out;
-	if (!(value & (1 << 10)))
-		return -2;
-
-	return 0;
-
-err_out:
-	printf("Error writing to the PHY addr=%02x\n", addr);
-	return -1;
-}
-
-int last_stage_init(void)
-{
-	unsigned int k;
-	unsigned int fpga;
-	int failed = 0;
-	char str_phys[] = "Setup PHYs -";
-	char str_serdes[] = "Start SERDES blocks";
-	char str_channels[] = "Start FPGA channels";
-	char str_locks[] = "Verify SERDES locks";
-	char str_hicb[] = "Verify HICB status";
-	char str_status[] = "Verify PHY status -";
-	char slash[] = "\\|/-\\|/-";
-
-	print_fpga_info(0);
-	print_fpga_info(1);
-
-	/* setup Gbit PHYs */
-	puts("TRANS: ");
-	puts(str_phys);
-	int retval;
-	struct mii_dev *mdiodev = mdio_alloc();
-	if (!mdiodev)
-		return -ENOMEM;
-	strncpy(mdiodev->name, CONFIG_SYS_GBIT_MII_BUSNAME, MDIO_NAME_LEN);
-	mdiodev->read = bb_miiphy_read;
-	mdiodev->write = bb_miiphy_write;
-
-	retval = mdio_register(mdiodev);
-	if (retval < 0)
-		return retval;
-
-	for (k = 0; k < 32; ++k) {
-		configure_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k);
-		putc('\b');
-		putc(slash[k % 8]);
-	}
-
-	mdiodev = mdio_alloc();
-	if (!mdiodev)
-		return -ENOMEM;
-	strncpy(mdiodev->name, CONFIG_SYS_GBIT_MII1_BUSNAME, MDIO_NAME_LEN);
-	mdiodev->read = bb_miiphy_read;
-	mdiodev->write = bb_miiphy_write;
-
-	retval = mdio_register(mdiodev);
-	if (retval < 0)
-		return retval;
-
-	for (k = 0; k < 32; ++k) {
-		configure_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k);
-		putc('\b');
-		putc(slash[k % 8]);
-	}
-	blank_string(strlen(str_phys));
-
-	/* take fpga serdes blocks out of reset */
-	puts(str_serdes);
-	udelay(500000);
-	FPGA_SET_REG(0, quad_serdes_reset, 0);
-	FPGA_SET_REG(1, quad_serdes_reset, 0);
-	blank_string(strlen(str_serdes));
-
-	/* take channels out of reset */
-	puts(str_channels);
-	udelay(500000);
-	for (fpga = 0; fpga < 2; ++fpga) {
-		for (k = 0; k < 32; ++k)
-			FPGA_SET_REG(fpga, ch[k].config_int, 0);
-	}
-	blank_string(strlen(str_channels));
-
-	/* verify channels serdes lock */
-	puts(str_locks);
-	udelay(500000);
-	for (fpga = 0; fpga < 2; ++fpga) {
-		for (k = 0; k < 32; ++k) {
-			u16 status;
-			FPGA_GET_REG(fpga, ch[k].status_int, &status);
-			if (!(status & (1 << 4))) {
-				failed = 1;
-				printf("fpga %d channel %d: no serdes lock\n",
-					fpga, k);
-			}
-			/* reset events */
-			FPGA_SET_REG(fpga, ch[k].status_int, 0);
-		}
-	}
-	blank_string(strlen(str_locks));
-
-	/* verify hicb_status */
-	puts(str_hicb);
-	for (fpga = 0; fpga < 2; ++fpga) {
-		for (k = 0; k < 32; ++k) {
-			u16 status;
-			FPGA_GET_REG(fpga, hicb_ch[k].status_int, &status);
-			if (status)
-				printf("fpga %d hicb %d: hicb status %04x\n",
-					fpga, k, status);
-			/* reset events */
-			FPGA_SET_REG(fpga, hicb_ch[k].status_int, 0);
-		}
-	}
-	blank_string(strlen(str_hicb));
-
-	/* verify phy status */
-	puts(str_status);
-	for (k = 0; k < 32; ++k) {
-		if (verify_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k)) {
-			printf("verify baseboard phy %d failed\n", k);
-			failed = 1;
-		}
-		putc('\b');
-		putc(slash[k % 8]);
-	}
-	for (k = 0; k < 32; ++k) {
-		if (verify_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k)) {
-			printf("verify extensionboard phy %d failed\n", k);
-			failed = 1;
-		}
-		putc('\b');
-		putc(slash[k % 8]);
-	}
-	blank_string(strlen(str_status));
-
-	printf("Starting 64 channels %s\n", failed ? "failed" : "ok");
-
-	return 0;
-}
-
-void gd405ex_init(void)
-{
-	unsigned int k;
-
-	if (i2c_probe(0x22)) { /* i2c_probe returns 0 on success */
-		for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
-			gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM;
-	} else {
-		pca9698_direction_output(0x22, 39, 1);
-	}
-}
-
-void gd405ex_set_fpga_reset(unsigned state)
-{
-	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
-
-	if (legacy) {
-		if (state) {
-			out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
-			out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
-		} else {
-			out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
-			out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
-		}
-	} else {
-		pca9698_set_value(0x22, 39, state ? 0 : 1);
-	}
-}
-
-void gd405ex_setup_hw(void)
-{
-	gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED_N, 0);
-	gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED, 1);
-}
-
-int gd405ex_get_fpga_done(unsigned fpga)
-{
-	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
-
-	if (legacy)
-		return in_le16((void *)LATCH3_BASE)
-			& CONFIG_SYS_FPGA_DONE(fpga);
-	else
-		return pca9698_get_value(0x22, fpga ? 9 : 8);
-}
diff --git a/board/gdsys/dlvision/Kconfig b/board/gdsys/dlvision/Kconfig
deleted file mode 100644
index 8db4fbe..0000000
--- a/board/gdsys/dlvision/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DLVISION
-
-config SYS_BOARD
-	default "dlvision"
-
-config SYS_VENDOR
-	default "gdsys"
-
-config SYS_CONFIG_NAME
-	default "dlvision"
-
-endif
diff --git a/board/gdsys/dlvision/MAINTAINERS b/board/gdsys/dlvision/MAINTAINERS
deleted file mode 100644
index e4d40f8..0000000
--- a/board/gdsys/dlvision/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-DLVISION BOARD
-M:	Dirk Eibach <eibach@gdsys.de>
-S:	Maintained
-F:	board/gdsys/dlvision/
-F:	include/configs/dlvision.h
-F:	configs/dlvision_defconfig
diff --git a/board/gdsys/dlvision/Makefile b/board/gdsys/dlvision/Makefile
deleted file mode 100644
index 755eb4c..0000000
--- a/board/gdsys/dlvision/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= dlvision.o
diff --git a/board/gdsys/dlvision/dlvision.c b/board/gdsys/dlvision/dlvision.c
deleted file mode 100644
index 32f7ba3..0000000
--- a/board/gdsys/dlvision/dlvision.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2009
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-
-enum {
-	HWTYPE_DLVISION_CPU = 0,
-	HWTYPE_DLVISION_CON = 1,
-};
-
-#define HWREV_100	6
-
-int board_early_init_f(void)
-{
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);	/* set all to be non-critical */
-	mtdcr(UIC0PR, 0xFFFFFF80);	/* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest prio */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	/*
-	 * EBC Configuration Register: set ready timeout to 512 ebc-clks
-	 * -> ca. 15 us
-	 */
-	mtebc(EBC0_CFG, 0xa8400000);	/* ebc always driven */
-
-	/*
-	 * setup io-latches
-	 */
-	out_le16((void *)CONFIG_SYS_LATCH_BASE, 0x00f0);
-	out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x100), 0x0002);
-	out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x200), 0x0000);
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	/*
-	 * set "startup-finished"-gpios
-	 */
-	gpio_write_bit(21, 0);
-	gpio_write_bit(22, 1);
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-	u8 channel2_msr = in_8((void *)CONFIG_UART_BASE + 0x26);
-	u8 channel3_msr = in_8((void *)CONFIG_UART_BASE + 0x36);
-	u8 channel7_msr = in_8((void *)CONFIG_UART_BASE + 0x76);
-	u8 unit_type;
-	u8 local_con;
-	u8 audio;
-	u8 hardware_version;
-
-	printf("Board: ");
-
-	unit_type = (channel2_msr & 0x80) ? 0x01 : 0x00;
-	local_con = (channel2_msr & 0x20) ? 0x01 : 0x00;
-	audio = (channel3_msr & 0x20) ? 0x01 : 0x00;
-	hardware_version =
-		  ((channel7_msr & 0x20) ? 0x01 : 0x00)
-		| ((channel7_msr & 0x80) ? 0x02 : 0x00)
-		| ((channel7_msr & 0x40) ? 0x04 : 0x00);
-
-	switch (unit_type) {
-	case HWTYPE_DLVISION_CON:
-		printf("DL-Vision-CON");
-		break;
-
-	case HWTYPE_DLVISION_CPU:
-		printf("DL-Vision-CPU");
-		break;
-
-	default:
-		printf("UnitType %d, unsupported", unit_type);
-		break;
-	}
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	puts("\n       ");
-
-	switch (hardware_version) {
-	case HWREV_100:
-		printf("HW-Ver 1.00");
-		break;
-
-	default:
-		printf("HW-Ver %d, unsupported",
-		       hardware_version);
-		break;
-	}
-
-	if (local_con)
-		printf(", local console");
-
-	if (audio)
-		printf(", audio support");
-
-	puts("\n");
-
-	return 0;
-}
diff --git a/board/gdsys/gdppc440etx/Kconfig b/board/gdsys/gdppc440etx/Kconfig
deleted file mode 100644
index 1f21c89..0000000
--- a/board/gdsys/gdppc440etx/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_GDPPC440ETX
-
-config SYS_BOARD
-	default "gdppc440etx"
-
-config SYS_VENDOR
-	default "gdsys"
-
-config SYS_CONFIG_NAME
-	default "gdppc440etx"
-
-endif
diff --git a/board/gdsys/gdppc440etx/MAINTAINERS b/board/gdsys/gdppc440etx/MAINTAINERS
deleted file mode 100644
index cd8d1c6..0000000
--- a/board/gdsys/gdppc440etx/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-GDPPC440ETX BOARD
-M:	Dirk Eibach <eibach@gdsys.de>
-S:	Maintained
-F:	board/gdsys/gdppc440etx/
-F:	include/configs/gdppc440etx.h
-F:	configs/gdppc440etx_defconfig
diff --git a/board/gdsys/gdppc440etx/Makefile b/board/gdsys/gdppc440etx/Makefile
deleted file mode 100644
index 7e3fc38..0000000
--- a/board/gdsys/gdppc440etx/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= gdppc440etx.o
-extra-y	+= init.o
diff --git a/board/gdsys/gdppc440etx/config.mk b/board/gdsys/gdppc440etx/config.mk
deleted file mode 100644
index 73341a5..0000000
--- a/board/gdsys/gdppc440etx/config.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-#
-# G&D 440EP/GR ETX-Module
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c
deleted file mode 100644
index 04191df..0000000
--- a/board/gdsys/gdppc440etx/gdppc440etx.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * (C) Copyright 2008
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * Based on board/amcc/yosemite/yosemite.c
- * (C) Copyright 2006-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/4xx_pci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* info for FLASH chips */
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-int board_early_init_f(void)
-{
-	register uint reg;
-
-	/*
-	 * Setup the external bus controller/chip selects
-	 */
-	mfebc(EBC0_CFG, reg);
-	mtebc(EBC0_CFG, reg | 0x04000000);		/* Set ATC */
-
-	/*
-	 * Setup the GPIO pins
-	 */
-
-	/* setup Address lines for flash size 64Meg. */
-	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x54000000);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x54000000);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x54000000);
-
-	/* setup emac */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
-	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
-	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
-
-	/* UART0 and UART1*/
-	out32(GPIO1_TCR, in32(GPIO1_TCR)     | 0x16000000);
-	out32(GPIO1_OSRL, in32(GPIO1_OSRL)   | 0x02180000);
-	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00400000);
-	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x04010000);
-
-	/* disable boot-eeprom WP */
-	out32(GPIO0_OSRL, in32(GPIO0_OSRL) & ~0x00C00000);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) & ~0x00C00000);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) & ~0x00C00000);
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0x08000000);
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~0x08000000);
-
-	/* external interrupts IRQ0...3 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000);
-	out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x00005500);
-	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500);
-
-
-	/*
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000009);	/* ATI & UIC1 crit are critical */
-	mtdcr(UIC0PR, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(UIC0TR, 0x01c00008);	/* per ref-board manual */
-	mtdcr(UIC0VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(UIC1TR, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	/*
-	 * Setup other serial configuration
-	 */
-	mfsdr(SDR0_PCI0, reg);
-	mtsdr(SDR0_PCI0, 0x80000000 | reg);	/* PCI arbiter enabled */
-	mtsdr(SDR0_PFC0, 0x00003e00);	/* Pin function */
-	mtsdr(SDR0_PFC1, 0x00048000);	/* Pin function: UART0 has 4 pins */
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	uint pbcr;
-	int size_val;
-	uint sz;
-
-	/* Re-do sizing to get full correct info */
-	mfebc(PB0CR, pbcr);
-
-	if (gd->bd->bi_flashsize > 0x08000000)
-		panic("Max. flash banksize is 128 MB!\n");
-
-	for (sz = gd->bd->bi_flashsize, size_val = 7;
-	    ((sz & 0x08000000) == 0) && (size_val > 0); --size_val)
-		sz <<= 1;
-
-	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtebc(PB0CR, pbcr);
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CONFIG_SYS_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: GDPPC440ETX - G&D PPC440EP/GR ETX-module");
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-/*
- * Override weak pci_pre_init()
- */
-#if defined(CONFIG_PCI)
-int pci_pre_init(struct pci_controller *hose)
-{
-	/* First call common code */
-	__pci_pre_init(hose);
-
-	/* enable 66 MHz ext. Clock */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x00008000);
-	out32(GPIO1_OR, in32(GPIO1_OR) | 0x00008000);
-
-	return 1;
-}
-#endif	/* defined(CONFIG_PCI) */
diff --git a/board/gdsys/gdppc440etx/init.S b/board/gdsys/gdppc440etx/init.S
deleted file mode 100644
index 2db84b5..0000000
--- a/board/gdsys/gdppc440etx/init.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
-* (C) Copyright 2008
-* Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
-*
-* based on board/amcc/yosemite/init.S
-* original Copyright not specified there
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#include <asm-offsets.h>
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-#include <asm/mmu.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-    tlbtab_start
-
-    /*
-     * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use
-     * the speed up boot process. It is patched after relocation to enable SA_I
-     */
-    tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR,
-	0, AC_RWX | SA_G/*|SA_I*/)
-
-    /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-    tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR,
-	0, AC_RWX | SA_G )
-
-    tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE,
-	0, AC_RWX | SA_IG )
-    tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE,
-	0, AC_RW | SA_IG )
-
-    /* PCI */
-    tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE,
-	0, AC_RW | SA_IG )
-    tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1,
-	0, AC_RW | SA_IG )
-    tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2,
-	0, AC_RW | SA_IG )
-    tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3,
-	0, AC_RW | SA_IG )
-
-    tlbtab_end
diff --git a/board/gdsys/intip/Kconfig b/board/gdsys/intip/Kconfig
deleted file mode 100644
index 479bb12..0000000
--- a/board/gdsys/intip/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_INTIP
-
-config SYS_BOARD
-	default "intip"
-
-config SYS_VENDOR
-	default "gdsys"
-
-config SYS_CONFIG_NAME
-	default "intip"
-
-endif
diff --git a/board/gdsys/intip/MAINTAINERS b/board/gdsys/intip/MAINTAINERS
deleted file mode 100644
index c99d507..0000000
--- a/board/gdsys/intip/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-INTIP BOARD
-M:	Dirk Eibach <eibach@gdsys.de>
-S:	Maintained
-F:	board/gdsys/intip/
-F:	include/configs/intip.h
-F:	configs/devconcenter_defconfig
-F:	configs/intip_defconfig
diff --git a/board/gdsys/intip/Makefile b/board/gdsys/intip/Makefile
deleted file mode 100644
index 2fbc983..0000000
--- a/board/gdsys/intip/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2008
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= intip.o
-obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
-extra-y	+= init.o
diff --git a/board/gdsys/intip/chip_config.c b/board/gdsys/intip/chip_config.c
deleted file mode 100644
index ea276a3..0000000
--- a/board/gdsys/intip/chip_config.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx_config.h>
-
-struct ppc4xx_config ppc4xx_config_val[] = {
-	{
-		"600-nor", "NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"600-nand", "NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x80, 0xce, 0x1f, 0x79, 0x90, 0x01, 0xa0,
-			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"800-nor", "NOR  CPU: 800 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"800-nand", "NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x80, 0xba, 0x14, 0x99, 0x90, 0x01, 0xa0,
-			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"1000-nor", "NOR  CPU:1000 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"1000-nand", "NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x82, 0x96, 0x19, 0xb9, 0x90, 0x01, 0xa0,
-			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"1066-nor", "NOR  CPU:1066 PLB: 266 OPB:  88 EBC:  88",
-		{
-			0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"1066-nand", "NAND CPU:1066 PLB: 266 OPB:  88 EBC:  88",
-		{
-			0x86, 0x80, 0xb3, 0x01, 0x9d, 0x90, 0x01, 0xa0,
-			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-};
-
-int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/gdsys/intip/config.mk b/board/gdsys/intip/config.mk
deleted file mode 100644
index c8c53e2..0000000
--- a/board/gdsys/intip/config.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# (C) Copyright 2008-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-#
-# G&D CompactCenter
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/gdsys/intip/init.S b/board/gdsys/intip/init.S
deleted file mode 100644
index 1fc2a2f..0000000
--- a/board/gdsys/intip/init.S
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2009
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * Based on board/amcc/canyonlands/init.S
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
-	 * use the speed up boot process. It is patched after relocation to
-	 * enable SA_I
-	 */
-	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR,
-		4, AC_RWX | SA_G) /* TLB 0 */
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
-	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR,
-		0, AC_RWX | SA_G)
-#endif
-
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC,
-		AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC,
-		AC_RW | SA_IG)
-
-	/* TLB-entry for NVRAM */
-	tlbentry(CONFIG_SYS_NVRAM_BASE, SZ_1M, CONFIG_SYS_NVRAM_BASE, 4,
-		AC_RW | SA_IG)
-
-	/* TLB-entry for UART */
-	tlbentry(CONFIG_SYS_UART_BASE, SZ_16K, CONFIG_SYS_UART_BASE, 4,
-		AC_RW | SA_IG)
-
-	/* TLB-entry for IO */
-	tlbentry(CONFIG_SYS_IO_BASE, SZ_16K, CONFIG_SYS_IO_BASE, 4,
-		AC_RW | SA_IG)
-
-	/* TLB-entry for OCM */
-	tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4,
-		AC_RWX | SA_I)
-
-	/* TLB-entry for Local Configuration registers => peripherals */
-	tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS,
-		4, AC_RWX | SA_IG)
-
-	/* AHB: Internal USB Peripherals (USB, SATA) */
-	tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4,
-		AC_RWX | SA_IG)
-
-	tlbtab_end
diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c
deleted file mode 100644
index 2d7d789..0000000
--- a/board/gdsys/intip/intip.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * (C) Copyright 2009
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * Based on board/amcc/canyonlands/canyonlands.c
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc440.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <i2c.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/4xx_pcie.h>
-#include <asm/ppc4xx-gpio.h>
-
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define CONFIG_SYS_BCSR3_PCIE		0x10
-
-int board_early_init_f(void)
-{
-	/*
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000005);	/* ATI & UIC1 crit are critical */
-	mtdcr(UIC0PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC0TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC0VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC1TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC2ER, 0x00000000);	/* disable all */
-	mtdcr(UIC2CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC2PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC2TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC2VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC3ER, 0x00000000);	/* disable all */
-	mtdcr(UIC3CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC3PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC3TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC3VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
-
-	/*
-	 * Configure PFC (Pin Function Control) registers
-	 * enable GPIO 49-63
-	 * UART0: 4 pins
-	 */
-	mtsdr(SDR0_PFC0, 0x00007fff);
-	mtsdr(SDR0_PFC1, 0x00040000);
-
-	/* Enable PCI host functionality in SDR0_PCI0 */
-	mtsdr(SDR0_PCI0, 0xe0000000);
-
-	mtsdr(SDR0_SRST1, 0);	/* Pull AHB out of reset default=1 */
-
-	/* Setup PLB4-AHB bridge based on the system address map */
-	mtdcr(AHB_TOP, 0x8000004B);
-	mtdcr(AHB_BOT, 0x8000004B);
-
-	/*
-	* Configure USB-STP pins as alternate and not GPIO
-	* It seems to be neccessary to configure the STP pins as GPIO
-	* input at powerup (perhaps while USB reset is asserted). So
-	* we configure those pins to their "real" function now.
-	*/
-	gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
-	gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
-
-	/* Trigger board component reset */
-	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
-	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);
-	udelay(50);
-	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffbf);
-	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffbf);
-	udelay(50);
-	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
-	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);
-
-	return 0;
-}
-
-int get_cpu_num(void)
-{
-	int cpu = NA_OR_UNKNOWN_CPU;
-
-	return cpu;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-#ifdef CONFIG_DEVCONCENTER
-	printf("Board: DevCon-Center");
-#else
-	printf("Board: Intip");
-#endif
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	/*
-	 * CompactCenter has 64MBytes, DevCon-Center 128MBytes of NOR FLASH
-	 * (Spansion 29GL512), but the boot EBC mapping only supports a maximum
-	 * of 16MBytes (4.ff00.0000 - 4.ffff.ffff).
-	 * To solve this problem, the FLASH has to get remapped to another
-	 * EBC address which accepts bigger regions:
-	 *
-	 * 0xfn00.0000 -> 4.cn00.0000
-	 */
-
-	u32 bxcr_bw = (CONFIG_SYS_FLASH_SIZE == 128 << 20) ?
-		EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB;
-
-	/* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */
-	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L
-		| bxcr_bw
-		| EBC_BXCR_BU_RW
-		| EBC_BXCR_BW_16BIT);
-
-	/* Remove TLB entry of boot EBC mapping */
-	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
-
-	/* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */
-	program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
-
-	/*
-	 * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
-	 * 0xfc00.0000 is possible
-	 */
-
-	/*
-	 * Clear potential errors resulting from auto-calibration.
-	 * If not done, then we could get an interrupt later on when
-	 * exceptions are enabled.
-	 */
-	set_mcsr(get_mcsr());
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	u32 sdr0_srst1 = 0;
-	u32 eth_cfg;
-
-	/*
-	 * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
-	 * This is board specific, so let's do it here.
-	 */
-	mfsdr(SDR0_ETH_CFG, eth_cfg);
-	/* disable SGMII mode */
-	eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
-		     SDR0_ETH_CFG_SGMII1_ENABLE |
-		     SDR0_ETH_CFG_SGMII0_ENABLE);
-	/* Set the for 2 RGMII mode */
-	/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
-	eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
-	eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
-	mtsdr(SDR0_ETH_CFG, eth_cfg);
-
-	/*
-	 * The AHB Bridge core is held in reset after power-on or reset
-	 * so enable it now
-	 */
-	mfsdr(SDR0_SRST1, sdr0_srst1);
-	sdr0_srst1 &= ~SDR0_SRST1_AHB;
-	mtsdr(SDR0_SRST1, sdr0_srst1);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-extern void __ft_board_setup(void *blob, bd_t *bd);
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	__ft_board_setup(blob, bd);
-
-	fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
-			     "disabled", sizeof("disabled"), 1);
-
-	fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
-			     "disabled", sizeof("disabled"), 1);
-
-	return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/gdsys/mpc8308/mpc8308.c b/board/gdsys/mpc8308/mpc8308.c
index 1b8e035..86b257f 100644
--- a/board/gdsys/mpc8308/mpc8308.c
+++ b/board/gdsys/mpc8308/mpc8308.c
@@ -9,7 +9,6 @@
 #include <command.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
 #include <asm/global_data.h>
 
 #include "mpc8308.h"
diff --git a/board/liebherr/lwmon5/Kconfig b/board/liebherr/lwmon5/Kconfig
deleted file mode 100644
index ec8349d..0000000
--- a/board/liebherr/lwmon5/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_LWMON5
-
-config SYS_BOARD
-	default "lwmon5"
-
-config SYS_VENDOR
-	default "liebherr"
-
-config SYS_CONFIG_NAME
-	default "lwmon5"
-
-endif
diff --git a/board/liebherr/lwmon5/MAINTAINERS b/board/liebherr/lwmon5/MAINTAINERS
deleted file mode 100644
index df45730..0000000
--- a/board/liebherr/lwmon5/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-LWMON5 BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/liebherr/lwmon5/
-F:	include/configs/lwmon5.h
-F:	configs/lwmon5_defconfig
diff --git a/board/liebherr/lwmon5/Makefile b/board/liebherr/lwmon5/Makefile
deleted file mode 100644
index 02478ca..0000000
--- a/board/liebherr/lwmon5/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= lwmon5.o kbd.o sdram.o
-extra-y	+= init.o
diff --git a/board/liebherr/lwmon5/config.mk b/board/liebherr/lwmon5/config.mk
deleted file mode 100644
index d0348e8..0000000
--- a/board/liebherr/lwmon5/config.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-# lwmon5 (440EPx)
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/liebherr/lwmon5/init.S b/board/liebherr/lwmon5/init.S
deleted file mode 100644
index e5207c2..0000000
--- a/board/liebherr/lwmon5/init.S
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
-	 */
-	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G)
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
-	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G)
-#endif
-
-	/* TLB-entry for PCI Memory */
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_RW | SA_IG)
-
-	/* TLB-entry for the FPGA Chip select 2 */
-	tlbentry(CONFIG_SYS_FPGA_BASE_0, SZ_1M, CONFIG_SYS_FPGA_BASE_0, 1, AC_RWX | SA_I|SA_G)
-
-	/* TLB-entry for the FPGA Chip select 3 */
-	tlbentry(CONFIG_SYS_FPGA_BASE_1, SZ_1M, CONFIG_SYS_FPGA_BASE_1, 1,AC_RWX | SA_I|SA_G)
-
-	/* TLB-entry for the LIME Controller */
-	tlbentry(CONFIG_SYS_LIME_BASE_0, SZ_16M, CONFIG_SYS_LIME_BASE_0, 1, AC_RWX | SA_I|SA_G)
-	tlbentry(CONFIG_SYS_LIME_BASE_1, SZ_16M, CONFIG_SYS_LIME_BASE_1, 1, AC_RWX | SA_I|SA_G)
-	tlbentry(CONFIG_SYS_LIME_BASE_2, SZ_16M, CONFIG_SYS_LIME_BASE_2, 1, AC_RWX | SA_I|SA_G)
-	tlbentry(CONFIG_SYS_LIME_BASE_3, SZ_16M, CONFIG_SYS_LIME_BASE_3, 1, AC_RWX | SA_I|SA_G)
-
-	/* TLB-entry for Internal Registers & OCM */
-	tlbentry(0xe0000000, SZ_16M, 0xe0000000, 0,  AC_RWX | SA_I)
-
-	/*TLB-entry PCI registers*/
-	tlbentry(0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_RWX | SA_IG)
-
-	/* TLB-entry for peripherals */
-	tlbentry(0xEF000000, SZ_16M, 0xEF000000, 1, AC_RWX | SA_IG)
-
-	tlbtab_end
diff --git a/board/liebherr/lwmon5/kbd.c b/board/liebherr/lwmon5/kbd.c
deleted file mode 100644
index d6c0a20..0000000
--- a/board/liebherr/lwmon5/kbd.c
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2001, 2002
- * DENX Software Engineering
- * Wolfgang Denk, wd@denx.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <i2c.h>
-#include <command.h>
-#include <console.h>
-#include <post.h>
-#include <serial.h>
-#include <malloc.h>
-
-#include <linux/types.h>
-#include <linux/string.h>	/* for strdup */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void kbd_init (void);
-static int compare_magic (uchar *kbd_data, uchar *str);
-
-/*--------------------- Local macros and constants --------------------*/
-#define	_NOT_USED_	0xFFFFFFFF
-
-/*------------------------- dspic io expander -----------------------*/
-#define DSPIC_PON_STATUS_REG	0x80A
-#define DSPIC_PON_INV_STATUS_REG 0x80C
-#define DSPIC_PON_KEY_REG	0x810
-/*------------------------- Keyboard controller -----------------------*/
-/* command codes */
-#define	KEYBD_CMD_READ_KEYS	0x01
-#define KEYBD_CMD_READ_VERSION	0x02
-#define KEYBD_CMD_READ_STATUS	0x03
-#define KEYBD_CMD_RESET_ERRORS	0x10
-
-/* status codes */
-#define KEYBD_STATUS_MASK	0x3F
-#define	KEYBD_STATUS_H_RESET	0x20
-#define KEYBD_STATUS_BROWNOUT	0x10
-#define KEYBD_STATUS_WD_RESET	0x08
-#define KEYBD_STATUS_OVERLOAD	0x04
-#define KEYBD_STATUS_ILLEGAL_WR	0x02
-#define KEYBD_STATUS_ILLEGAL_RD	0x01
-
-/* Number of bytes returned from Keyboard Controller */
-#define KEYBD_VERSIONLEN	2	/* version information */
-
-/*
- * This is different from the "old" lwmon dsPIC kbd controller
- * implementation. Now the controller still answers with 9 bytes,
- * but the last 3 bytes are always "0x06 0x07 0x08". So we just
- * set the length to compare to 6 instead of 9.
- */
-#define	KEYBD_DATALEN		6	/* normal key scan data */
-
-/* maximum number of "magic" key codes that can be assigned */
-
-static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR;
-static uchar dspic_addr = CONFIG_SYS_I2C_DSPIC_IO_ADDR;
-
-static uchar *key_match (uchar *);
-
-#define	KEYBD_SET_DEBUGMODE	'#'	/* Magic key to enable debug output */
-
-/***********************************************************************
-F* Function:     int board_postclk_init (void) P*A*Z*
- *
-P* Parameters:   none
-P*
-P* Returnvalue:  int
-P*                - 0 is always returned.
- *
-Z* Intention:    This function is the board_postclk_init() method implementation
-Z*               for the lwmon board.
- *
- ***********************************************************************/
-int board_postclk_init (void)
-{
-	kbd_init();
-
-	return (0);
-}
-
-static void kbd_init (void)
-{
-	uchar kbd_data[KEYBD_DATALEN];
-	uchar tmp_data[KEYBD_DATALEN];
-	uchar val, errcd;
-	int i;
-
-	i2c_set_bus_num(0);
-
-	gd->arch.kbd_status = 0;
-
-	/* Forced by PIC. Delays <= 175us loose */
-	udelay(1000);
-
-	/* Read initial keyboard error code */
-	val = KEYBD_CMD_READ_STATUS;
-	i2c_write (kbd_addr, 0, 0, &val, 1);
-	i2c_read (kbd_addr, 0, 0, &errcd, 1);
-	/* clear unused bits */
-	errcd &= KEYBD_STATUS_MASK;
-	/* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */
-	errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT);
-	if (errcd) {
-		gd->arch.kbd_status |= errcd << 8;
-	}
-	/* Reset error code and verify */
-	val = KEYBD_CMD_RESET_ERRORS;
-	i2c_write (kbd_addr, 0, 0, &val, 1);
-	udelay(1000);	/* delay NEEDED by keyboard PIC !!! */
-
-	val = KEYBD_CMD_READ_STATUS;
-	i2c_write (kbd_addr, 0, 0, &val, 1);
-	i2c_read (kbd_addr, 0, 0, &val, 1);
-
-	val &= KEYBD_STATUS_MASK;	/* clear unused bits */
-	if (val) {			/* permanent error, report it */
-		gd->arch.kbd_status |= val;
-		return;
-	}
-
-	/*
-	 * Read current keyboard state.
-	 *
-	 * After the error reset it may take some time before the
-	 * keyboard PIC picks up a valid keyboard scan - the total
-	 * scan time is approx. 1.6 ms (information by Martin Rajek,
-	 * 28 Sep 2002). We read a couple of times for the keyboard
-	 * to stabilize, using a big enough delay.
-	 * 10 times should be enough. If the data is still changing,
-	 * we use what we get :-(
-	 */
-
-	memset (tmp_data, 0xFF, KEYBD_DATALEN);	/* impossible value */
-	for (i=0; i<10; ++i) {
-		val = KEYBD_CMD_READ_KEYS;
-		i2c_write (kbd_addr, 0, 0, &val, 1);
-		i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
-
-		if (memcmp(kbd_data, tmp_data, KEYBD_DATALEN) == 0) {
-			/* consistent state, done */
-			break;
-		}
-		/* remeber last state, delay, and retry */
-		memcpy (tmp_data, kbd_data, KEYBD_DATALEN);
-		udelay (5000);
-	}
-}
-
-
-/* Read a register from the dsPIC. */
-int _dspic_read(ushort reg, ushort *data)
-{
-	uchar buf[sizeof(*data)];
-	int rval;
-
-	if (i2c_read(dspic_addr, reg, 2, buf, 2))
-		return -1;
-
-	rval = i2c_read(dspic_addr, reg, sizeof(reg), buf, sizeof(*data));
-	*data = (buf[0] << 8) | buf[1];
-
-	return rval;
-}
-
-
-/***********************************************************************
-F* Function:     int misc_init_r (void) P*A*Z*
- *
-P* Parameters:   none
-P*
-P* Returnvalue:  int
-P*                - 0 is always returned, even in the case of a keyboard
-P*                    error.
- *
-Z* Intention:    This function is the misc_init_r() method implementation
-Z*               for the lwmon board.
-Z*               The keyboard controller is initialized and the result
-Z*               of a read copied to the environment variable "keybd".
-Z*               If KEYBD_SET_DEBUGMODE is defined, a check is made for
-Z*               this key, and if found display to the LCD will be enabled.
-Z*               The keys in "keybd" are checked against the magic
-Z*               keycommands defined in the environment.
-Z*               See also key_match().
- *
-D* Design:       wd@denx.de
-C* Coding:       wd@denx.de
-V* Verification: dzu@denx.de
- ***********************************************************************/
-int misc_init_r_kbd (void)
-{
-	uchar kbd_data[KEYBD_DATALEN];
-	char keybd_env[2 * KEYBD_DATALEN + 1];
-	uchar kbd_init_status = gd->arch.kbd_status >> 8;
-	uchar kbd_status = gd->arch.kbd_status;
-	uchar val;
-	ushort data, inv_data;
-	char *str;
-	int i;
-
-	if (kbd_init_status) {
-		printf ("KEYBD: Error %02X\n", kbd_init_status);
-	}
-	if (kbd_status) {		/* permanent error, report it */
-		printf ("*** Keyboard error code %02X ***\n", kbd_status);
-		sprintf (keybd_env, "%02X", kbd_status);
-		setenv ("keybd", keybd_env);
-		return 0;
-	}
-
-	/*
-	 * Now we know that we have a working  keyboard,  so  disable
-	 * all output to the LCD except when a key press is detected.
-	 */
-
-	if ((console_assign (stdout, "serial") < 0) ||
-		(console_assign (stderr, "serial") < 0)) {
-		printf ("Can't assign serial port as output device\n");
-	}
-
-	/* Read Version */
-	val = KEYBD_CMD_READ_VERSION;
-	i2c_write (kbd_addr, 0, 0, &val, 1);
-	i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_VERSIONLEN);
-	printf ("KEYBD: Version %d.%d\n", kbd_data[0], kbd_data[1]);
-
-	/* Read current keyboard state */
-	val = KEYBD_CMD_READ_KEYS;
-	i2c_write (kbd_addr, 0, 0, &val, 1);
-	i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
-
-	/* read out start key from bse01 received via can */
-	_dspic_read(DSPIC_PON_STATUS_REG, &data);
-	/* check highbyte from status register */
-	if (data > 0xFF) {
-		_dspic_read(DSPIC_PON_INV_STATUS_REG, &inv_data);
-
-		/* check inverse data */
-		if ((data+inv_data) == 0xFFFF) {
-			/* don't overwrite local key */
-			if (kbd_data[1] == 0) {
-				/* read key value */
-				_dspic_read(DSPIC_PON_KEY_REG, &data);
-				str = (char *)&data;
-				/* swap bytes */
-				kbd_data[1] = str[1];
-				kbd_data[2] = str[0];
-				printf("CAN received startkey: 0x%X\n", data);
-			}
-		}
-	}
-
-	for (i = 0; i < KEYBD_DATALEN; ++i) {
-		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
-	}
-
-	setenv ("keybd", keybd_env);
-
-	str = strdup ((char *)key_match (kbd_data));	/* decode keys */
-#ifdef KEYBD_SET_DEBUGMODE
-	if (kbd_data[0] == KEYBD_SET_DEBUGMODE) {	/* set debug mode */
-		if ((console_assign (stdout, "lcd") < 0) ||
-			(console_assign (stderr, "lcd") < 0)) {
-			printf ("Can't assign LCD display as output device\n");
-		}
-	}
-#endif /* KEYBD_SET_DEBUGMODE */
-#ifdef CONFIG_PREBOOT	/* automatically configure "preboot" command on key match */
-	setenv ("preboot", str);	/* set or delete definition */
-#endif /* CONFIG_PREBOOT */
-	if (str != NULL) {
-		free (str);
-	}
-	return (0);
-}
-
-#ifdef CONFIG_PREBOOT
-
-static uchar kbd_magic_prefix[] = "key_magic";
-static uchar kbd_command_prefix[] = "key_cmd";
-
-static int compare_magic (uchar *kbd_data, uchar *str)
-{
-	uchar compare[KEYBD_DATALEN-1];
-	char *nxt;
-	int i;
-
-	/* Don't include modifier byte */
-	memcpy (compare, kbd_data+1, KEYBD_DATALEN-1);
-
-	for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) {
-		uchar c;
-		int k;
-
-		c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16);
-
-		if (str == (uchar *)nxt) {	/* invalid character */
-			break;
-		}
-
-		/*
-		 * Check if this key matches the input.
-		 * Set matches to zero, so they match only once
-		 * and we can find duplicates or extra keys
-		 */
-		for (k = 0; k < sizeof(compare); ++k) {
-			if (compare[k] == '\0')	/* only non-zero entries */
-				continue;
-			if (c == compare[k]) {	/* found matching key */
-				compare[k] = '\0';
-				break;
-			}
-		}
-		if (k == sizeof(compare)) {
-			return -1;		/* unmatched key */
-		}
-	}
-
-	/*
-	 * A full match leaves no keys in the `compare' array,
-	 */
-	for (i = 0; i < sizeof(compare); ++i) {
-		if (compare[i])
-		{
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
-/***********************************************************************
-F* Function:     static uchar *key_match (uchar *kbd_data) P*A*Z*
- *
-P* Parameters:   uchar *kbd_data
-P*                - The keys to match against our magic definitions
-P*
-P* Returnvalue:  uchar *
-P*                - != NULL: Pointer to the corresponding command(s)
-P*                     NULL: No magic is about to happen
- *
-Z* Intention:    Check if pressed key(s) match magic sequence,
-Z*               and return the command string associated with that key(s).
-Z*
-Z*               If no key press was decoded, NULL is returned.
-Z*
-Z*               Note: the first character of the argument will be
-Z*                     overwritten with the "magic charcter code" of the
-Z*                     decoded key(s), or '\0'.
-Z*
-Z*               Note: the string points to static environment data
-Z*                     and must be saved before you call any function that
-Z*                     modifies the environment.
- *
-D* Design:       wd@denx.de
-C* Coding:       wd@denx.de
-V* Verification: dzu@denx.de
- ***********************************************************************/
-static uchar *key_match (uchar *kbd_data)
-{
-	char magic[sizeof (kbd_magic_prefix) + 1];
-	uchar *suffix;
-	char *kbd_magic_keys;
-
-	/*
-	 * The following string defines the characters that can pe appended
-	 * to "key_magic" to form the names of environment variables that
-	 * hold "magic" key codes, i. e. such key codes that can cause
-	 * pre-boot actions. If the string is empty (""), then only
-	 * "key_magic" is checked (old behaviour); the string "125" causes
-	 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
-	 */
-	if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
-		kbd_magic_keys = "";
-
-	/* loop over all magic keys;
-	 * use '\0' suffix in case of empty string
-	 */
-	for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) {
-		sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
-		debug ("### Check magic \"%s\"\n", magic);
-		if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) {
-			char cmd_name[sizeof (kbd_command_prefix) + 1];
-			char *cmd;
-
-			sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
-
-			cmd = getenv (cmd_name);
-			debug ("### Set PREBOOT to $(%s): \"%s\"\n",
-					cmd_name, cmd ? cmd : "<<NULL>>");
-			*kbd_data = *suffix;
-			return ((uchar *)cmd);
-		}
-	}
-	debug ("### Delete PREBOOT\n");
-	*kbd_data = '\0';
-	return (NULL);
-}
-#endif /* CONFIG_PREBOOT */
-
-/***********************************************************************
-F* Function:     int do_kbd (cmd_tbl_t *cmdtp, int flag,
-F*                           int argc, char * const argv[]) P*A*Z*
- *
-P* Parameters:   cmd_tbl_t *cmdtp
-P*                - Pointer to our command table entry
-P*               int flag
-P*                - If the CMD_FLAG_REPEAT bit is set, then this call is
-P*                  a repetition
-P*               int argc
-P*                - Argument count
-P*               char * const argv[]
-P*                - Array of the actual arguments
-P*
-P* Returnvalue:  int
-P*                - 0 is always returned.
- *
-Z* Intention:    Implement the "kbd" command.
-Z*               The keyboard status is read.  The result is printed on
-Z*               the console and written into the "keybd" environment
-Z*               variable.
- *
-D* Design:       wd@denx.de
-C* Coding:       wd@denx.de
-V* Verification: dzu@denx.de
- ***********************************************************************/
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	uchar kbd_data[KEYBD_DATALEN];
-	char keybd_env[2 * KEYBD_DATALEN + 1];
-	uchar val;
-	int i;
-
-#if 0 /* Done in kbd_init */
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-
-	/* Read keys */
-	val = KEYBD_CMD_READ_KEYS;
-	i2c_write (kbd_addr, 0, 0, &val, 1);
-	i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
-
-	puts ("Keys:");
-	for (i = 0; i < KEYBD_DATALEN; ++i) {
-		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
-		printf (" %02x", kbd_data[i]);
-	}
-	putc ('\n');
-	setenv ("keybd", keybd_env);
-	return 0;
-}
-
-U_BOOT_CMD(
-	kbd,	1,	1,	do_kbd,
-	"read keyboard status",
-	""
-);
-
-/*----------------------------- Utilities -----------------------------*/
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
-	uchar kbd_data[KEYBD_DATALEN];
-	uchar val;
-
-	/* Read keys */
-	val = KEYBD_CMD_READ_KEYS;
-	i2c_write (kbd_addr, 0, 0, &val, 1);
-	i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
-
-	return (compare_magic(kbd_data, (uchar *)CONFIG_POST_KEY_MAGIC) == 0);
-}
-#endif
diff --git a/board/liebherr/lwmon5/lwmon5.c b/board/liebherr/lwmon5/lwmon5.c
deleted file mode 100644
index bb99a3b..0000000
--- a/board/liebherr/lwmon5/lwmon5.c
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- * (C) Copyright 2007-2013
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/ppc440.h>
-#include <asm/processor.h>
-#include <asm/ppc4xx-gpio.h>
-#include <asm/io.h>
-#include <post.h>
-#include <flash.h>
-#include <video.h>
-#include <mtd/cfi_flash.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static phys_addr_t lwmon5_cfi_flash_bank_addr[2] = CONFIG_SYS_FLASH_BANKS_LIST;
-
-ulong flash_get_size(ulong base, int banknum);
-int misc_init_r_kbd(void);
-
-int board_early_init_f(void)
-{
-	u32 sdr0_pfc1, sdr0_pfc2;
-	u32 reg;
-
-	/* PLB Write pipelining disabled. Denali Core workaround */
-	mtdcr(PLB4A0_ACR, 0xDE000000);
-	mtdcr(PLB4A1_ACR, 0xDE000000);
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(UIC0SR, 0xffffffff);  /* clear all. if write with 1 then the status is cleared  */
-	mtdcr(UIC0ER, 0x00000000);  /* disable all */
-	mtdcr(UIC0CR, 0x00000000);  /* we have not critical interrupts at the moment */
-	mtdcr(UIC0PR, 0xFFBFF1EF);  /* Adjustment of the polarity */
-	mtdcr(UIC0TR, 0x00000900);  /* per ref-board manual */
-	mtdcr(UIC0VR, 0x00000000);  /* int31 highest, base=0x000 is within DDRAM */
-	mtdcr(UIC0SR, 0xffffffff);  /* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);  /* clear all */
-	mtdcr(UIC1ER, 0x00000000);  /* disable all */
-	mtdcr(UIC1CR, 0x00000000);  /* all non-critical */
-	mtdcr(UIC1PR, 0xFFFFC6A5);  /* Adjustment of the polarity */
-	mtdcr(UIC1TR, 0x60000040);  /* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000000);  /* int31 highest, base=0x000 is within DDRAM */
-	mtdcr(UIC1SR, 0xffffffff);  /* clear all */
-
-	mtdcr(UIC2SR, 0xffffffff);  /* clear all */
-	mtdcr(UIC2ER, 0x00000000);  /* disable all */
-	mtdcr(UIC2CR, 0x00000000);  /* all non-critical */
-	mtdcr(UIC2PR, 0x27C00000);  /* Adjustment of the polarity */
-	mtdcr(UIC2TR, 0x3C000000);  /* per ref-board manual */
-	mtdcr(UIC2VR, 0x00000000);  /* int31 highest, base=0x000 is within DDRAM */
-	mtdcr(UIC2SR, 0xffffffff);  /* clear all */
-
-	/* Trace Pins are disabled. SDR0_PFC0 Register */
-	mtsdr(SDR0_PFC0, 0x0);
-
-	/* select Ethernet pins */
-	mfsdr(SDR0_PFC1, sdr0_pfc1);
-	/* SMII via ZMII */
-	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
-		SDR0_PFC1_SELECT_CONFIG_6;
-	mfsdr(SDR0_PFC2, sdr0_pfc2);
-	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
-		SDR0_PFC2_SELECT_CONFIG_6;
-
-	/* enable SPI (SCP) */
-	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL;
-
-	mtsdr(SDR0_PFC2, sdr0_pfc2);
-	mtsdr(SDR0_PFC1, sdr0_pfc1);
-
-	mtsdr(SDR0_PFC4, 0x80000000);
-
-	/* PCI arbiter disabled */
-	/* PCI Host Configuration disbaled */
-	mfsdr(SDR0_PCI0, reg);
-	reg = 0;
-	mtsdr(SDR0_PCI0, 0x00000000 | reg);
-
-	gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1);
-
-#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
-	/* enable the LSB transmitter */
-	gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1);
-	/* enable the CAN transmitter */
-	gpio_write_bit(CONFIG_SYS_GPIO_CAN_ENABLE, 1);
-
-	reg = 0; /* reuse as counter */
-	out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
-		in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR)
-			& ~CONFIG_SYS_DSPIC_TEST_MASK);
-	while (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) {
-		udelay(1000);
-	}
-	if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) {
-		/* set "boot error" flag */
-		out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
-			in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) |
-			CONFIG_SYS_DSPIC_TEST_MASK);
-	}
-#endif
-
-	/*
-	 * Reset PHY's:
-	 * The PHY's need a 2nd reset pulse, since the MDIO address is latched
-	 * upon reset, and with the first reset upon powerup, the addresses are
-	 * not latched reliable, since the IRQ line is multiplexed with an
-	 * MDIO address. A 2nd reset at this time will make sure, that the
-	 * correct address is latched.
-	 */
-	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
-	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
-	udelay(1000);
-	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 0);
-	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 0);
-	udelay(1000);
-	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
-	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
-
-	return 0;
-}
-
-/*
- * Override weak default with board specific version
- */
-phys_addr_t cfi_flash_bank_addr(int bank)
-{
-	return lwmon5_cfi_flash_bank_addr[bank];
-}
-
-/*
- * Override the weak default mapping function with a board specific one
- */
-u32 flash_get_bank_size(int cs, int idx)
-{
-	return flash_info[idx].size;
-}
-
-int board_early_init_r(void)
-{
-	u32 val0, val1;
-
-	/*
-	 * lwmon5 is manufactured in 2 different board versions:
-	 * The lwmon5a board has 64MiB NOR flash instead of the
-	 * 128MiB of the original lwmon5. Unfortunately the CFI driver
-	 * will report 2 banks of 64MiB even for the smaller flash
-	 * chip, since the bank is mirrored. To fix this, we bring
-	 * one bank into CFI query mode and read its response. This
-	 * enables us to detect the real number of flash devices/
-	 * banks which will be used later on by the common CFI driver.
-	 */
-
-	/* Put bank 0 into CFI command mode and read */
-	out_be32((void *)CONFIG_SYS_FLASH0, 0x00980098);
-	val0 = in_be32((void *)CONFIG_SYS_FLASH0 + FLASH_OFFSET_CFI_RESP);
-	val1 = in_be32((void *)CONFIG_SYS_FLASH1 + FLASH_OFFSET_CFI_RESP);
-
-	/* Reset flash again out of query mode */
-	out_be32((void *)CONFIG_SYS_FLASH0, 0x00f000f0);
-
-	/* When not identical, we have 2 different flash devices/banks */
-	if (val0 != val1)
-		return 0;
-
-	/*
-	 * Now we're sure that we're running on a LWMON5a board with
-	 * only 64MiB NOR flash in one bank:
-	 *
-	 * Set flash base address and bank count for CFI driver probing.
-	 */
-	cfi_flash_num_flash_banks = 1;
-	lwmon5_cfi_flash_bank_addr[0] = CONFIG_SYS_FLASH0;
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	u32 pbcr;
-	int size_val = 0;
-	u32 reg;
-	unsigned long usb2d0cr = 0;
-	unsigned long usb2phy0cr, usb2h0cr = 0;
-	unsigned long sdr0_pfc1, sdr0_srst;
-
-	/*
-	 * FLASH stuff...
-	 */
-
-	/* Re-do sizing to get full correct info */
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	mfebc(PB0CR, pbcr);
-	size_val = ffs(gd->bd->bi_flashsize) - 21;
-	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtebc(PB0CR, pbcr);
-
-	/*
-	 * Re-check to get correct base address
-	 */
-	flash_get_size(gd->bd->bi_flashstart, 0);
-
-	/* Monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET, -CONFIG_SYS_MONITOR_LEN, 0xffffffff,
-		      &flash_info[cfi_flash_num_flash_banks - 1]);
-
-	/* Env protection ON by default */
-	flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
-		      CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1,
-		      &flash_info[cfi_flash_num_flash_banks - 1]);
-
-	/*
-	 * USB suff...
-	 */
-
-	/* Reset USB */
-	/* Reset of USB2PHY0 must be active at least 10 us  */
-	mtsdr(SDR0_SRST0, SDR0_SRST0_USB2H | SDR0_SRST0_USB2D);
-	udelay(2000);
-
-	mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY | SDR0_SRST1_USB2HUTMI |
-	      SDR0_SRST1_USB2HPHY | SDR0_SRST1_OPBA2 |
-	      SDR0_SRST1_PLB42OPB1 | SDR0_SRST1_OPB2PLB40);
-	udelay(2000);
-
-	/* Errata CHIP_6 */
-
-	/* 1. Set internal PHY configuration */
-	/* SDR Setting */
-	mfsdr(SDR0_PFC1, sdr0_pfc1);
-	mfsdr(SDR0_USB0, usb2d0cr);
-	mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-	mfsdr(SDR0_USB2H0CR, usb2h0cr);
-
-	usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
-	usb2phy0cr = usb2phy0cr |  SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
-	usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
-	usb2phy0cr = usb2phy0cr |  SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
-	usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
-	usb2phy0cr = usb2phy0cr |  SDR0_USB2PHY0CR_DVBUS_PUREN;		/*1*/
-	usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
-	usb2phy0cr = usb2phy0cr |  SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
-	usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
-	usb2phy0cr = usb2phy0cr |  SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
-
-	/*
-	 * An 8-bit/60MHz interface is the only possible alternative
-	 * when connecting the Device to the PHY
-	 */
-	usb2h0cr   = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
-	usb2h0cr   = usb2h0cr |  SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
-
-	mtsdr(SDR0_PFC1, sdr0_pfc1);
-	mtsdr(SDR0_USB0, usb2d0cr);
-	mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-	mtsdr(SDR0_USB2H0CR, usb2h0cr);
-
-	/* 2. De-assert internal PHY reset */
-	mfsdr(SDR0_SRST1, sdr0_srst);
-	sdr0_srst = sdr0_srst & ~SDR0_SRST1_USB20PHY;
-	mtsdr(SDR0_SRST1, sdr0_srst);
-
-	/* 3. Wait for more than 1 ms */
-	udelay(2000);
-
-	/* 4. De-assert USB 2.0 Host main reset */
-	mfsdr(SDR0_SRST0, sdr0_srst);
-	sdr0_srst = sdr0_srst &~ SDR0_SRST0_USB2H;
-	mtsdr(SDR0_SRST0, sdr0_srst);
-	udelay(1000);
-
-	/* 5. De-assert reset of OPB2 cores */
-	mfsdr(SDR0_SRST1, sdr0_srst);
-	sdr0_srst = sdr0_srst &~ SDR0_SRST1_PLB42OPB1;
-	sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPB2PLB40;
-	sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPBA2;
-	mtsdr(SDR0_SRST1, sdr0_srst);
-	udelay(1000);
-
-	/* 6. Set EHCI Configure FLAG */
-
-	/* 7. Reassert internal PHY reset: */
-	mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY);
-	udelay(1000);
-
-	/*
-	 * Clear resets
-	 */
-	mtsdr(SDR0_SRST1, 0x00000000);
-	mtsdr(SDR0_SRST0, 0x00000000);
-
-	printf("USB:   Host(int phy) Device(ext phy)\n");
-
-	/*
-	 * Clear PLB4A0_ACR[WRP]
-	 * This fix will make the MAL burst disabling patch for the Linux
-	 * EMAC driver obsolete.
-	 */
-	reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
-	mtdcr(PLB4A0_ACR, reg);
-
-	/*
-	 * Init matrix keyboard
-	 */
-	misc_init_r_kbd();
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: %s", __stringify(CONFIG_HOSTNAME));
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-void hw_watchdog_reset(void)
-{
-	int val;
-#if defined(CONFIG_WD_MAX_RATE)
-	unsigned long long ct = get_ticks();
-
-	/*
-	 * Don't allow watch-dog triggering more frequently than
-	 * the predefined value CONFIG_WD_MAX_RATE [ticks].
-	 */
-	if (ct >= gd->arch.wdt_last) {
-		if ((ct - gd->arch.wdt_last) < CONFIG_WD_MAX_RATE)
-			return;
-	} else {
-		/* Time base counter had been reset */
-		if (((unsigned long long)(-1) - gd->arch.wdt_last + ct) <
-		    CONFIG_WD_MAX_RATE)
-			return;
-	}
-	gd->arch.wdt_last = get_ticks();
-#endif
-
-	/*
-	 * Toggle watchdog output
-	 */
-	val = gpio_read_out_bit(CONFIG_SYS_GPIO_WATCHDOG) == 0 ? 1 : 0;
-	gpio_write_bit(CONFIG_SYS_GPIO_WATCHDOG, val);
-}
-
-int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	if (argc < 2)
-		return cmd_usage(cmdtp);
-
-	if ((strcmp(argv[1], "on") == 0))
-		gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1);
-	else if ((strcmp(argv[1], "off") == 0))
-		gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0);
-	else
-		return cmd_usage(cmdtp);
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	eepromwp,	2,	0,	do_eeprom_wp,
-	"eeprom write protect off/on",
-	"<on|off> - enable (on) or disable (off) I2C EEPROM write protect"
-);
-
-#if defined(CONFIG_VIDEO)
-#include <video_fb.h>
-#include <mb862xx.h>
-
-extern GraphicDevice mb862xx;
-
-static const gdc_regs init_regs [] = {
-	{ 0x0100, 0x00000f00 },
-	{ 0x0020, 0x801401df },
-	{ 0x0024, 0x00000000 },
-	{ 0x0028, 0x00000000 },
-	{ 0x002c, 0x00000000 },
-	{ 0x0110, 0x00000000 },
-	{ 0x0114, 0x00000000 },
-	{ 0x0118, 0x01df0280 },
-	{ 0x0004, 0x031f0000 },
-	{ 0x0008, 0x027f027f },
-	{ 0x000c, 0x015f028f },
-	{ 0x0010, 0x020c0000 },
-	{ 0x0014, 0x01df01ea },
-	{ 0x0018, 0x00000000 },
-	{ 0x001c, 0x01e00280 },
-	{ 0x0100, 0x80010f00 },
-	{ 0x0, 0x0 }
-};
-
-const gdc_regs *board_get_regs(void)
-{
-	return init_regs;
-}
-
-/* Returns Lime base address */
-unsigned int board_video_init(void)
-{
-	/*
-	 * Reset Lime controller
-	 */
-	gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
-	udelay(500);
-	gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);
-
-	mb862xx.winSizeX = 640;
-	mb862xx.winSizeY = 480;
-	mb862xx.gdfBytesPP = 2;
-	mb862xx.gdfIndex = GDF_15BIT_555RGB;
-
-	return CONFIG_SYS_LIME_BASE_0;
-}
-
-#define DEFAULT_BRIGHTNESS	0x64
-
-static void board_backlight_brightness(int brightness)
-{
-	if (brightness > 0) {
-		/* pwm duty, lamp on */
-		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), brightness);
-		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x701);
-	} else {
-		/* lamp off */
-		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), 0x00);
-		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x00);
-	}
-}
-
-void board_backlight_switch(int flag)
-{
-	char * param;
-	int rc;
-
-	if (flag) {
-		param = getenv("brightness");
-		rc = param ? simple_strtol(param, NULL, 10) : -1;
-		if (rc < 0)
-			rc = DEFAULT_BRIGHTNESS;
-	} else {
-		rc = 0;
-	}
-	board_backlight_brightness(rc);
-}
-
-#if defined(CONFIG_CONSOLE_EXTRA_INFO)
-/*
- * Return text to be printed besides the logo.
- */
-void video_get_info_str(int line_number, char *info)
-{
-	if (line_number == 1)
-		strcpy(info, " Board: Lwmon5 (Liebherr Elektronik GmbH)");
-	else
-		info [0] = '\0';
-}
-#endif /* CONFIG_CONSOLE_EXTRA_INFO */
-#endif /* CONFIG_VIDEO */
-
-void board_reset(void)
-{
-	gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1);
-}
-
-#ifdef CONFIG_SPL_OS_BOOT
-/*
- * lwmon5 specific implementation of spl_start_uboot()
- *
- * RETURN
- * 0 if booting into OS is selected (default)
- * 1 if booting into U-Boot is selected
- */
-int spl_start_uboot(void)
-{
-	char s[8];
-
-	env_init();
-	getenv_f("boot_os", s, sizeof(s));
-	if ((s != NULL) && (strcmp(s, "yes") == 0))
-		return 0;
-
-	return 1;
-}
-
-/*
- * This function is called from the SPL U-Boot version for
- * early init stuff, that needs to be done for OS (e.g. Linux)
- * booting. Doing it later in the real U-Boot would not work
- * in case that the SPL U-Boot boots Linux directly.
- */
-void spl_board_init(void)
-{
-	const gdc_regs *regs = board_get_regs();
-
-	/*
-	 * Setup PFC registers, mainly for ethernet support
-	 * later on in Linux
-	 */
-	board_early_init_f();
-
-	/* enable the LSB transmitter */
-	gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1);
-
-	/*
-	 * Clear resets
-	 */
-	mtsdr(SDR0_SRST1, 0x00000000);
-	mtsdr(SDR0_SRST0, 0x00000000);
-
-	/*
-	 * Reset Lime controller
-	 */
-	gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
-	udelay(500);
-	gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);
-
-	out_be32((void *)CONFIG_SYS_LIME_SDRAM_CLOCK, CONFIG_SYS_MB862xx_CCF);
-	udelay(300);
-	out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_MB862xx_MMR);
-
-	while (regs->index) {
-		out_be32((void *)(CONFIG_SYS_LIME_BASE_0 + GC_DISP_BASE) +
-			 regs->index, regs->value);
-		regs++;
-	}
-
-	board_backlight_brightness(DEFAULT_BRIGHTNESS);
-}
-#endif
diff --git a/board/liebherr/lwmon5/sdram.c b/board/liebherr/lwmon5/sdram.c
deleted file mode 100644
index 4a65d74..0000000
--- a/board/liebherr/lwmon5/sdram.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * (C) Copyright 2006
- * Sylvie Gohl,		    AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman,	    AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder,	    AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * (C) Copyright 2007-2013
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/cache.h>
-#include <asm/ppc440.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-#define MY_TLB_WORD2_I_ENABLE	0			/* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE	TLB_WORD2_I_ENABLE	/* disable caching on SDRAM */
-#endif
-
-/*-----------------------------------------------------------------------------+
- * Prototypes
- *-----------------------------------------------------------------------------*/
-extern int denali_wait_for_dlllock(void);
-extern void denali_core_search_data_eye(void);
-extern void dcbz_area(u32 start_address, u32 num_bytes);
-
-static u32 is_ecc_enabled(void)
-{
-	u32 val;
-
-	mfsdram(DDR0_22, val);
-	val &= DDR0_22_CTRL_RAW_MASK;
-	if (val)
-		return 1;
-	else
-		return 0;
-}
-
-void board_add_ram_info(int use_default)
-{
-	PPC4xx_SYS_INFO board_cfg;
-	u32 val;
-
-	if (is_ecc_enabled())
-		puts(" (ECC");
-	else
-		puts(" (ECC not");
-
-	get_sys_info(&board_cfg);
-	printf(" enabled, %ld MHz", (board_cfg.freqPLB * 2) / 1000000);
-
-	mfsdram(DDR0_03, val);
-	val = DDR0_03_CASLAT_DECODE(val);
-	printf(", CL%d)", val);
-}
-
-#ifdef CONFIG_DDR_ECC
-static void wait_ddr_idle(void)
-{
-	/*
-	 * Controller idle status cannot be determined for Denali
-	 * DDR2 code. Just return here.
-	 */
-}
-
-static void program_ecc(u32 start_address,
-			u32 num_bytes,
-			u32 tlb_word2_i_value)
-{
-	u32 val;
-	u32 current_addr = start_address;
-	u32 size;
-	int bytes_remaining;
-
-	sync();
-	wait_ddr_idle();
-
-	/*
-	 * Because of 440EPx errata CHIP 11, we don't touch the last 256
-	 * bytes of SDRAM.
-	 */
-	bytes_remaining = num_bytes - CONFIG_SYS_MEM_TOP_HIDE;
-
-	/*
-	 * We have to write the ECC bytes by zeroing and flushing in smaller
-	 * steps, since the whole 256MByte takes too long for the external
-	 * watchdog.
-	 */
-	while (bytes_remaining > 0) {
-		size = min((64 << 20), bytes_remaining);
-
-		/* Write zero's to SDRAM */
-		dcbz_area(current_addr, size);
-
-		/* Write modified dcache lines back to memory */
-		clean_dcache_range(current_addr, current_addr + size);
-
-		current_addr += 64 << 20;
-		bytes_remaining -= 64 << 20;
-		WATCHDOG_RESET();
-	}
-
-	sync();
-	wait_ddr_idle();
-
-	/* Clear error status */
-	mfsdram(DDR0_00, val);
-	mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
-
-	/* Set 'int_mask' parameter to functionnal value */
-	mfsdram(DDR0_01, val);
-	mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF));
-
-	sync();
-	wait_ddr_idle();
-}
-#endif
-
-/*************************************************************************
- *
- * dram_init -- 440EPx's DDR controller is a DENALI Core
- *
- ************************************************************************/
-int dram_init(void)
-{
-	/* CL=4 */
-	mtsdram(DDR0_02, 0x00000000);
-
-	mtsdram(DDR0_00, 0x0000190A);
-	mtsdram(DDR0_01, 0x01000000);
-	mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */
-
-	mtsdram(DDR0_04, 0x0B030300);
-	mtsdram(DDR0_05, 0x02020308);
-	mtsdram(DDR0_06, 0x0003C812);
-	mtsdram(DDR0_07, 0x00090100);
-	mtsdram(DDR0_08, 0x03c80001);
-	mtsdram(DDR0_09, 0x00011D5F);
-	mtsdram(DDR0_10, 0x00000100);
-	mtsdram(DDR0_11, 0x000CC800);
-	mtsdram(DDR0_12, 0x00000003);
-	mtsdram(DDR0_14, 0x00000000);
-	mtsdram(DDR0_17, 0x1e000000);
-	mtsdram(DDR0_18, 0x1e1e1e1e);
-	mtsdram(DDR0_19, 0x1e1e1e1e);
-	mtsdram(DDR0_20, 0x0B0B0B0B);
-	mtsdram(DDR0_21, 0x0B0B0B0B);
-#ifdef CONFIG_DDR_ECC
-	mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC       */
-#else
-	mtsdram(DDR0_22, 0x00267F0B);
-#endif
-
-	mtsdram(DDR0_23, 0x01000000);
-	mtsdram(DDR0_24, 0x01010001);
-
-	mtsdram(DDR0_26, 0x2D93028A);
-	mtsdram(DDR0_27, 0x0784682B);
-
-	mtsdram(DDR0_28, 0x00000080);
-	mtsdram(DDR0_31, 0x00000000);
-	mtsdram(DDR0_42, 0x01000008);
-
-	mtsdram(DDR0_43, 0x050A0200);
-	mtsdram(DDR0_44, 0x00000005);
-	mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
-
-	denali_wait_for_dlllock();
-
-#if defined(CONFIG_DDR_DATA_EYE)
-	/* -----------------------------------------------------------+
-	 * Perform data eye search if requested.
-	 * ----------------------------------------------------------*/
-	program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
-		    TLB_WORD2_I_ENABLE);
-	denali_core_search_data_eye();
-	remove_tlb(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
-#endif
-
-	/*
-	 * Program tlb entries for this size (dynamic)
-	 */
-	program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
-		    MY_TLB_WORD2_I_ENABLE);
-
-#if defined(CONFIG_DDR_ECC)
-#if defined(CONFIG_4xx_DCACHE)
-	/*
-	 * If ECC is enabled, initialize the parity bits.
-	 */
-	program_ecc(0, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
-#else /* CONFIG_4xx_DCACHE */
-	/*
-	 * Setup 2nd TLB with same physical address but different virtual address
-	 * with cache enabled. This is done for fast ECC generation.
-	 */
-	program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
-
-	/*
-	 * If ECC is enabled, initialize the parity bits.
-	 */
-	program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
-
-	/*
-	 * Now after initialization (auto-calibration and ECC generation)
-	 * remove the TLB entries with caches enabled and program again with
-	 * desired cache functionality
-	 */
-	remove_tlb(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20);
-#endif /* CONFIG_4xx_DCACHE */
-#endif /* CONFIG_DDR_ECC */
-
-	/*
-	 * Clear possible errors resulting from data-eye-search.
-	 * If not done, then we could get an interrupt later on when
-	 * exceptions are enabled.
-	 */
-	set_mcsr(get_mcsr());
-
-	gd->ram_size = CONFIG_SYS_MBYTES_SDRAM << 20;
-
-	return 0;
-}
diff --git a/board/mosaixtech/icon/Kconfig b/board/mosaixtech/icon/Kconfig
deleted file mode 100644
index 3145a06..0000000
--- a/board/mosaixtech/icon/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_ICON
-
-config SYS_BOARD
-	default "icon"
-
-config SYS_VENDOR
-	default "mosaixtech"
-
-config SYS_CONFIG_NAME
-	default "icon"
-
-endif
diff --git a/board/mosaixtech/icon/MAINTAINERS b/board/mosaixtech/icon/MAINTAINERS
deleted file mode 100644
index f3af072..0000000
--- a/board/mosaixtech/icon/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ICON BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/mosaixtech/icon/
-F:	include/configs/icon.h
-F:	configs/icon_defconfig
diff --git a/board/mosaixtech/icon/Makefile b/board/mosaixtech/icon/Makefile
deleted file mode 100644
index d554a8b..0000000
--- a/board/mosaixtech/icon/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2009-2010
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= icon.o
-obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
-extra-y	+= init.o
diff --git a/board/mosaixtech/icon/chip_config.c b/board/mosaixtech/icon/chip_config.c
deleted file mode 100644
index 3c5706f..0000000
--- a/board/mosaixtech/icon/chip_config.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2009-2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx_config.h>
-
-struct ppc4xx_config ppc4xx_config_val[] = {
-	{
-		"400-133", "CPU: 400 PLB: 133 OPB:  66 EBC:  66",
-		{ 0x86, 0x78, 0xc2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 }
-	},
-	{
-		"500-166", "CPU: 500 PLB: 166 OPB:  83 EBC:  83",
-		{ 0x87, 0x78, 0xf2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 }
-	},
-	{
-		"533-133", "CPU: 533 PLB: 133 OPB:  66 EBC:  66",
-		{ 0x87, 0x79, 0x02, 0x52, 0x05, 0xa5, 0x04, 0xe1 }
-	},
-	{
-		"667-133", "CPU: 667 PLB: 133 OPB:  66 EBC:  66",
-		{ 0x87, 0x79, 0x42, 0x56, 0x05, 0xa5, 0x04, 0xe1 }
-	},
-	{
-		"667-166", "CPU: 667 PLB: 166 OPB:  83 EBC:  83",
-		{ 0x87, 0x79, 0x42, 0x06, 0x05, 0xa5, 0x04, 0xe1 }
-	},
-	{
-		"800-160", "CPU: 800 PLB: 160 OPB:  53 EBC:  17",
-		{ 0x86, 0x79, 0x81, 0xa7, 0x07, 0xa5, 0x04, 0xe1 }
-	},
-};
-
-int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/mosaixtech/icon/config.mk b/board/mosaixtech/icon/config.mk
deleted file mode 100644
index b689fd0..0000000
--- a/board/mosaixtech/icon/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2009-2010
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/mosaixtech/icon/icon.c b/board/mosaixtech/icon/icon.c
deleted file mode 100644
index 7558234..0000000
--- a/board/mosaixtech/icon/icon.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- * (C) Copyright 2009-2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <i2c.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <netdev.h>
-#include <video.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-#include <asm/4xx_pcie.h>
-#include <linux/errno.h>
-#include <asm/mmu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	unsigned long mfr;
-
-	/*
-	 * Interrupt controller setup for the ICON 440SPe board.
-	 *
-	 *--------------------------------------------------------------------
-	 * IRQ    | Source                            | Pol.  | Sensi.| Crit.
-	 *--------+-----------------------------------+-------+-------+-------
-	 * IRQ 00 | UART0                             | High  | Level | Non
-	 * IRQ 01 | UART1                             | High  | Level | Non
-	 * IRQ 02 | IIC0                              | High  | Level | Non
-	 * IRQ 03 | IIC1                              | High  | Level | Non
-	 * IRQ 04 | PCI0X0 MSG IN                     | High  | Level | Non
-	 * IRQ 05 | PCI0X0 CMD Write                  | High  | Level | Non
-	 * IRQ 06 | PCI0X0 Power Mgt                  | High  | Level | Non
-	 * IRQ 07 | PCI0X0 VPD Access                 | Rising| Edge  | Non
-	 * IRQ 08 | PCI0X0 MSI level 0                | High  | Lvl/ed| Non
-	 * IRQ 09 | External IRQ 15 - (PCI-Express)   | pgm H | Pgm   | Non
-	 * IRQ 10 | UIC2 Non-critical Int.            | NA    | NA    | Non
-	 * IRQ 11 | UIC2 Critical Interrupt           | NA    | NA    | Crit
-	 * IRQ 12 | PCI Express MSI Level 0           | Rising| Edge  | Non
-	 * IRQ 13 | PCI Express MSI Level 1           | Rising| Edge  | Non
-	 * IRQ 14 | PCI Express MSI Level 2           | Rising| Edge  | Non
-	 * IRQ 15 | PCI Express MSI Level 3           | Rising| Edge  | Non
-	 * IRQ 16 | UIC3 Non-critical Int.            | NA    | NA    | Non
-	 * IRQ 17 | UIC3 Critical Interrupt           | NA    | NA    | Crit
-	 * IRQ 18 | External IRQ 14 - (PCI-Express)   | Pgm   | Pgm   | Non
-	 * IRQ 19 | DMA Channel 0 FIFO Full           | High  | Level | Non
-	 * IRQ 20 | DMA Channel 0 Stat FIFO           | High  | Level | Non
-	 * IRQ 21 | DMA Channel 1 FIFO Full           | High  | Level | Non
-	 * IRQ 22 | DMA Channel 1 Stat FIFO           | High  | Level | Non
-	 * IRQ 23 | I2O Inbound Doorbell              | High  | Level | Non
-	 * IRQ 24 | Inbound Post List FIFO Not Empt   | High  | Level | Non
-	 * IRQ 25 | I2O Region 0 LL PLB Write         | High  | Level | Non
-	 * IRQ 26 | I2O Region 1 LL PLB Write         | High  | Level | Non
-	 * IRQ 27 | I2O Region 0 HB PLB Write         | High  | Level | Non
-	 * IRQ 28 | I2O Region 1 HB PLB Write         | High  | Level | Non
-	 * IRQ 29 | GPT Down Count Timer              | Rising| Edge  | Non
-	 * IRQ 30 | UIC1 Non-critical Int.            | NA    | NA    | Non
-	 * IRQ 31 | UIC1 Critical Interrupt           | NA    | NA    | Crit.
-	 *--------------------------------------------------------------------
-	 * IRQ 32 | Ext. IRQ 13 - (PCI-Express)       |pgm (H)|pgm/Lvl| Non
-	 * IRQ 33 | MAL Serr                          | High  | Level | Non
-	 * IRQ 34 | MAL Txde                          | High  | Level | Non
-	 * IRQ 35 | MAL Rxde                          | High  | Level | Non
-	 * IRQ 36 | DMC CE or DMC UE                  | High  | Level | Non
-	 * IRQ 37 | EBC or UART2                      | High  |Lvl Edg| Non
-	 * IRQ 38 | MAL TX EOB                        | High  | Level | Non
-	 * IRQ 39 | MAL RX EOB                        | High  | Level | Non
-	 * IRQ 40 | PCIX0 MSI Level 1                 | High  |Lvl Edg| Non
-	 * IRQ 41 | PCIX0 MSI level 2                 | High  |Lvl Edg| Non
-	 * IRQ 42 | PCIX0 MSI level 3                 | High  |Lvl Edg| Non
-	 * IRQ 43 | L2 Cache                          | Risin | Edge  | Non
-	 * IRQ 44 | GPT Compare Timer 0               | Risin | Edge  | Non
-	 * IRQ 45 | GPT Compare Timer 1               | Risin | Edge  | Non
-	 * IRQ 46 | GPT Compare Timer 2               | Risin | Edge  | Non
-	 * IRQ 47 | GPT Compare Timer 3               | Risin | Edge  | Non
-	 * IRQ 48 | GPT Compare Timer 4               | Risin | Edge  | Non
-	 * IRQ 49 | Ext. IRQ 12 - PCI-X               |pgm/Fal|pgm/Lvl| Non
-	 * IRQ 50 | Ext. IRQ 11 -                     |pgm (H)|pgm/Lvl| Non
-	 * IRQ 51 | Ext. IRQ 10 -                     |pgm (H)|pgm/Lvl| Non
-	 * IRQ 52 | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non
-	 * IRQ 53 | Ext. IRQ 8                        |pgm (H)|pgm/Lvl| Non
-	 * IRQ 54 | DMA Error                         | High  | Level | Non
-	 * IRQ 55 | DMA I2O Error                     | High  | Level | Non
-	 * IRQ 56 | Serial ROM                        | High  | Level | Non
-	 * IRQ 57 | PCIX0 Error                       | High  | Edge  | Non
-	 * IRQ 58 | Ext. IRQ 7-                       |pgm (H)|pgm/Lvl| Non
-	 * IRQ 59 | Ext. IRQ 6-                       |pgm (H)|pgm/Lvl| Non
-	 * IRQ 60 | EMAC0 Interrupt                   | High  | Level | Non
-	 * IRQ 61 | EMAC0 Wake-up                     | High  | Level | Non
-	 * IRQ 62 | Reserved                          | High  | Level | Non
-	 * IRQ 63 | XOR                               | High  | Level | Non
-	 *--------------------------------------------------------------------
-	 * IRQ 64 | PE0 AL                            | High  | Level | Non
-	 * IRQ 65 | PE0 VPD Access                    | Risin | Edge  | Non
-	 * IRQ 66 | PE0 Hot Reset Request             | Risin | Edge  | Non
-	 * IRQ 67 | PE0 Hot Reset Request             | Falli | Edge  | Non
-	 * IRQ 68 | PE0 TCR                           | High  | Level | Non
-	 * IRQ 69 | PE0 BusMaster VCO                 | Falli | Edge  | Non
-	 * IRQ 70 | PE0 DCR Error                     | High  | Level | Non
-	 * IRQ 71 | Reserved                          | N/A   | N/A   | Non
-	 * IRQ 72 | PE1 AL                            | High  | Level | Non
-	 * IRQ 73 | PE1 VPD Access                    | Risin | Edge  | Non
-	 * IRQ 74 | PE1 Hot Reset Request             | Risin | Edge  | Non
-	 * IRQ 75 | PE1 Hot Reset Request             | Falli | Edge  | Non
-	 * IRQ 76 | PE1 TCR                           | High  | Level | Non
-	 * IRQ 77 | PE1 BusMaster VCO                 | Falli | Edge  | Non
-	 * IRQ 78 | PE1 DCR Error                     | High  | Level | Non
-	 * IRQ 79 | Reserved                          | N/A   | N/A   | Non
-	 * IRQ 80 | PE2 AL                            | High  | Level | Non
-	 * IRQ 81 | PE2 VPD Access                    | Risin | Edge  | Non
-	 * IRQ 82 | PE2 Hot Reset Request             | Risin | Edge  | Non
-	 * IRQ 83 | PE2 Hot Reset Request             | Falli | Edge  | Non
-	 * IRQ 84 | PE2 TCR                           | High  | Level | Non
-	 * IRQ 85 | PE2 BusMaster VCO                 | Falli | Edge  | Non
-	 * IRQ 86 | PE2 DCR Error                     | High  | Level | Non
-	 * IRQ 87 | Reserved                          | N/A   | N/A   | Non
-	 * IRQ 88 | External IRQ(5)                   | Progr | Progr | Non
-	 * IRQ 89 | External IRQ 4 - Ethernet         | Progr | Progr | Non
-	 * IRQ 90 | External IRQ 3 - PCI-X            | Progr | Progr | Non
-	 * IRQ 91 | External IRQ 2 - PCI-X            | Progr | Progr | Non
-	 * IRQ 92 | External IRQ 1 - PCI-X            | Progr | Progr | Non
-	 * IRQ 93 | External IRQ 0 - PCI-X            | Progr | Progr | Non
-	 * IRQ 94 | Reserved                          | N/A   | N/A   | Non
-	 * IRQ 95 | Reserved                          | N/A   | N/A   | Non
-	 *--------------------------------------------------------------------
-	 * IRQ 96 | PE0 INTA                          | High  | Level | Non
-	 * IRQ 97 | PE0 INTB                          | High  | Level | Non
-	 * IRQ 98 | PE0 INTC                          | High  | Level | Non
-	 * IRQ 99 | PE0 INTD                          | High  | Level | Non
-	 * IRQ 100| PE1 INTA                          | High  | Level | Non
-	 * IRQ 101| PE1 INTB                          | High  | Level | Non
-	 * IRQ 102| PE1 INTC                          | High  | Level | Non
-	 * IRQ 103| PE1 INTD                          | High  | Level | Non
-	 * IRQ 104| PE2 INTA                          | High  | Level | Non
-	 * IRQ 105| PE2 INTB                          | High  | Level | Non
-	 * IRQ 106| PE2 INTC                          | High  | Level | Non
-	 * IRQ 107| PE2 INTD                          | Risin | Edge  | Non
-	 * IRQ 108| PCI Express MSI Level 4           | Risin | Edge  | Non
-	 * IRQ 109| PCI Express MSI Level 5           | Risin | Edge  | Non
-	 * IRQ 110| PCI Express MSI Level 6           | Risin | Edge  | Non
-	 * IRQ 111| PCI Express MSI Level 7           | Risin | Edge  | Non
-	 * IRQ 116| PCI Express MSI Level 12          | Risin | Edge  | Non
-	 * IRQ 112| PCI Express MSI Level 8           | Risin | Edge  | Non
-	 * IRQ 113| PCI Express MSI Level 9           | Risin | Edge  | Non
-	 * IRQ 114| PCI Express MSI Level 10          | Risin | Edge  | Non
-	 * IRQ 115| PCI Express MSI Level 11          | Risin | Edge  | Non
-	 * IRQ 117| PCI Express MSI Level 13          | Risin | Edge  | Non
-	 * IRQ 118| PCI Express MSI Level 14          | Risin | Edge  | Non
-	 * IRQ 119| PCI Express MSI Level 15          | Risin | Edge  | Non
-	 * IRQ 120| PCI Express MSI Level 16          | Risin | Edge  | Non
-	 * IRQ 121| PCI Express MSI Level 17          | Risin | Edge  | Non
-	 * IRQ 122| PCI Express MSI Level 18          | Risin | Edge  | Non
-	 * IRQ 123| PCI Express MSI Level 19          | Risin | Edge  | Non
-	 * IRQ 124| PCI Express MSI Level 20          | Risin | Edge  | Non
-	 * IRQ 125| PCI Express MSI Level 21          | Risin | Edge  | Non
-	 * IRQ 126| PCI Express MSI Level 22          | Risin | Edge  | Non
-	 * IRQ 127| PCI Express MSI Level 23          | Risin | Edge  | Non
-	 */
-
-	/*
-	 * Put UICs in PowerPC 440SPe mode.
-	 * Initialise UIC registers. Clear all interrupts. Disable all
-	 * interrupts. Set critical interrupt values. Set interrupt polarities.
-	 * Set interrupt trigger levels. Make bit 0 High priority. Clear all
-	 * interrupts again.
-	 */
-	mtdcr(UIC3SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr(UIC3ER, 0x00000000);	/* disable all interrupts */
-	mtdcr(UIC3CR, 0x00000000);	/* Set Critical / Non Critical IRQs */
-	mtdcr(UIC3PR, 0xffffffff);	/* Set Interrupt Polarities*/
-	mtdcr(UIC3TR, 0x001fffff);	/* Set Interrupt Trigger Levels */
-	mtdcr(UIC3VR, 0x00000001);	/* Set Vect base=0,INT31 Highest prio */
-	mtdcr(UIC3SR, 0x00000000);	/* clear all  interrupts*/
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all  interrupts*/
-
-	mtdcr(UIC2SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr(UIC2ER, 0x00000000);	/* disable all interrupts*/
-	mtdcr(UIC2CR, 0x00000000);	/* Set Critical / Non Critical IRQs */
-	mtdcr(UIC2PR, 0xebebebff);	/* Set Interrupt Polarities*/
-	mtdcr(UIC2TR, 0x74747400);	/* Set Interrupt Trigger Levels */
-	mtdcr(UIC2VR, 0x00000001);	/* Set Vect base=0,INT31 Highest prio */
-	mtdcr(UIC2SR, 0x00000000);	/* clear all interrupts */
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all interrupts */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* Clear all interrupts*/
-	mtdcr(UIC1ER, 0x00000000);	/* disable all interrupts*/
-	mtdcr(UIC1CR, 0x00000000);	/* Set Critical / Non Critical IRQs */
-	mtdcr(UIC1PR, 0xffffffff);	/* Set Interrupt Polarities */
-	mtdcr(UIC1TR, 0x001f8040);	/* Set Interrupt Trigger Levels*/
-	mtdcr(UIC1VR, 0x00000001);	/* Set Vect base=0,INT31 Highest prio */
-	mtdcr(UIC1SR, 0x00000000);	/* clear all interrupts*/
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all interrupts*/
-
-	mtdcr(UIC0SR, 0xffffffff);	/* Clear all interrupts */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all int. excepted cascade */
-	mtdcr(UIC0CR, 0x00104001);	/* Set Critical / Non Critical IRQs */
-	mtdcr(UIC0PR, 0xffffffff);	/* Set Interrupt Polarities*/
-	mtdcr(UIC0TR, 0x010f0004);	/* Set Interrupt Trigger Levels */
-	mtdcr(UIC0VR, 0x00000001);	/* Set Vect base=0,INT31 Highest prio */
-	mtdcr(UIC0SR, 0x00000000);	/* clear all interrupts*/
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all interrupts*/
-
-	mfsdr(SDR0_MFR, mfr);
-	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mtsdr(SDR0_MFR, mfr);
-
-	mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0);
-
-	out_be32((void *)GPIO0_OR, CONFIG_SYS_GPIO_OR);
-	out_be32((void *)GPIO0_ODR, CONFIG_SYS_GPIO_ODR);
-	out_be32((void *)GPIO0_TCR, CONFIG_SYS_GPIO_TCR);
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	/*
-	 * ICON has 64MBytes of NOR FLASH (Spansion 29GL512), but the
-	 * boot EBC mapping only supports a maximum of 16MBytes
-	 * (4.ff00.0000 - 4.ffff.ffff).
-	 * To solve this problem, the FLASH has to get remapped to another
-	 * EBC address which accepts bigger regions:
-	 *
-	 * 0xfc00.0000 -> 4.ec00.0000
-	 */
-
-	/* Remap the NOR FLASH to 0xec00.0000 ... 0xefff.ffff */
-	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
-
-	/* Remove TLB entry of boot EBC mapping */
-	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
-
-	/* Add TLB entry for 0xfc00.0000 -> 0x4.ec00.0000 */
-	program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
-		    CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
-
-	/*
-	 * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
-	 * 0xfc00.0000 is possible
-	 */
-
-	/*
-	 * Clear potential errors resulting from auto-calibration.
-	 * If not done, then we could get an interrupt later on when
-	 * exceptions are enabled.
-	 */
-	set_mcsr(get_mcsr());
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: ICON");
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-/*
- * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
- * board specific values.
- *
- * Tested successfully with the following SODIMM:
- * Crucial CT6464AC667.4FE - 512MB SO-DIMM (single rank)
- *
- * Tests with Micron MT4HTF6464HZ-667H1 showed problems in "cold" state,
- * directly after power-up. Only after running for more than 10 minutes
- * real stable auto-calibration windows could be found.
- */
-u32 ddr_wrdtr(u32 default_val)
-{
-	return SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV;
-}
-
-u32 ddr_clktr(u32 default_val)
-{
-	return SDRAM_CLKTR_CLKP_180_DEG_ADV;
-}
-
-/*
- * Override the weak default implementation and return the
- * last PCIe slot number (max number - 1).
- */
-int board_pcie_last(void)
-{
-	/* Only 2 PCIe ports used on ICON, so the last one is 1 */
-	return 1;
-}
-
-/*
- * Video
- */
-#ifdef CONFIG_VIDEO_SM501
-#include <sm501.h>
-
-#define DISPLAY_WIDTH   640
-#define DISPLAY_HEIGHT  480
-
-static const SMI_REGS sm502_init_regs[] = {
-	{0x00004, 0x0},
-	{0x00040, 0x00021847},
-	{0x00044, 0x091a0a01}, /* 24 MHz pixclk */
-	{0x00054, 0x0},
-	{0x00048, 0x00021847},
-	{0x0004C, 0x091a0a01},
-	{0x00054, 0x1},
-	{0x80004, 0xc428bb17},
-	{0x8000C, 0x00000000},
-	{0x80010, 0x0a000a00},
-	{0x80014, 0x02800000},
-	{0x80018, 0x01e00000},
-	{0x8001C, 0x00000000},
-	{0x80020, 0x01e00280},
-	{0x80024, 0x02fa027f},
-	{0x80028, 0x004a0280},
-	{0x8002C, 0x020c01df},
-	{0x80030, 0x000201e7},
-	{0x80200, 0x00010000},
-	{0x00008, 0x20000000}, /* gpio29 is pwm0, LED_PWM */
-	{0x0000C, 0x3f000000}, /* gpio56 - gpio61 as flat panel data pins */
-	{0x10020, 0x25725728}, /* 20 kHz pwm0, 50 % duty cycle, disabled */
-	{0x80000, 0x0f010106}, /* vsync & hsync pos, disp on */
-	{0, 0}
-};
-
-/*
- * Return a pointer to the register initialization table.
- */
-const SMI_REGS *board_get_regs(void)
-{
-	return sm502_init_regs;
-}
-
-int board_get_width(void)
-{
-	return DISPLAY_WIDTH;
-}
-
-int board_get_height(void)
-{
-	return DISPLAY_HEIGHT;
-}
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-/*
- * Return text to be printed besides the logo.
- */
-void video_get_info_str(int line_number, char *info)
-{
-	if (line_number == 1)
-		strcpy(info, " Board: ICON");
-	else
-		info[0] = '\0';
-}
-#endif
-
-#endif /* CONFIG_VIDEO_SM501 */
diff --git a/board/mosaixtech/icon/init.S b/board/mosaixtech/icon/init.S
deleted file mode 100644
index c28a3a3..0000000
--- a/board/mosaixtech/icon/init.S
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * (C) Copyright 2009-2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx.h>
-
-/*
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- */
-
-	.section .bootpg,"ax"
-
-	.globl tlbtab
-tlbtab:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
-	 * use the speed up boot process. It is patched after relocation to
-	 * enable SA_I.
-	 */
-	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR,
-		 4, AC_RWX | SA_G) /* TLB 0 */
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4,
-		 AC_RWX | SA_I)
-
-	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4,
-		 AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K,
-		 CONFIG_SYS_ACE_BASE_PHYS_L, CONFIG_SYS_ACE_BASE_PHYS_H,
-		 AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD,
-		 AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD,
-		 AC_RW | SA_IG)
-	tlbtab_end
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
deleted file mode 100644
index 31636b3..0000000
--- a/board/mpl/common/common_util.c
+++ /dev/null
@@ -1,677 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <video_fb.h>
-#include "common_util.h"
-#include <asm/processor.h>
-#include <asm/byteorder.h>
-#include <i2c.h>
-#include <pci.h>
-#include <malloc.h>
-#include <bzlib.h>
-#include <video.h>
-
-#ifdef CONFIG_PIP405
-#include "../pip405/pip405.h"
-#include <asm/4xx_pci.h>
-#endif
-#if defined(CONFIG_TARGET_MIP405) || defined(CONFIG_TARGET_MIP405T)
-#include "../mip405/mip405.h"
-#include <asm/4xx_pci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern int mem_test(ulong start, ulong ramsize, int quiet);
-
-#define I2C_BACKUP_ADDR 0x7C00		/* 0x200 bytes for backup */
-#define IMAGE_SIZE CONFIG_SYS_MONITOR_LEN	/* ugly, but it works for now */
-
-#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) \
-	|| defined(CONFIG_TARGET_MIP405T)
-/*-----------------------------------------------------------------------
- * On PIP/MIP405 we have 3 (4) possible boot mode
- *
- * - Boot from Flash (Flash CS = CS0, MPS CS = CS1)
- * - Boot from MPS   (Flash CS = CS1, MPS CS = CS0)
- * - Boot from PCI with Flash map (Flash CS = CS0, MPS CS = CS1)
- * - Boot from PCI with MPS map   (Flash CS = CS1, MPS CS = CS0)
- * The flash init is the first board specific routine which is called
- * after code relocation (running from SDRAM)
- * The first thing we do is to map the Flash CS to the Flash area and
- * the MPS CS to the MPS area. Since the flash size is unknown at this
- * point, we use the max flash size and the lowest flash address as base.
- *
- * After flash detection we adjust the size of the CS area accordingly.
- * update_flash_size() will fix in wrong values in the flash_info structure,
- * misc_init_r() will fix the values in the board info structure
- */
-int get_boot_mode(void)
-{
-	unsigned long pbcr;
-	int res = 0;
-	pbcr = mfdcr(CPC0_PSR);
-	if ((pbcr & PSR_ROM_WIDTH_MASK) == 0)
-		/* boot via MPS or MPS mapping */
-		res = BOOT_MPS;
-	if (pbcr & PSR_ROM_LOC)
-		/* boot via PCI.. */
-		res |= BOOT_PCI;
-	 return res;
-}
-
-/* Map the flash high (in boot area)
-   This code can only be executed from SDRAM (after relocation).
-*/
-void setup_cs_reloc(void)
-{
-	int mode;
-	/*
-	 * since we are relocated, we can set-up the CS finaly
-	 * but first of all, switch off PCI mapping (in case it
-	 * was a PCI boot)
-	 */
-	out32r(PMM0MA, 0L);
-	/* get boot mode */
-	mode = get_boot_mode();
-	/*
-	 * we map the flash high in every case
-	 * first find out to which CS the flash is attached to
-	 */
-	if (mode & BOOT_MPS) {
-		/* map flash high on CS1 and MPS on CS0 */
-		mtdcr(EBC0_CFGADDR, PB0AP);
-		mtdcr(EBC0_CFGDATA, MPS_AP);
-		mtdcr(EBC0_CFGADDR, PB0CR);
-		mtdcr(EBC0_CFGDATA, MPS_CR);
-		/*
-		 * we use the default values (max values) for the flash
-		 * because its real size is not yet known
-		 */
-		mtdcr(EBC0_CFGADDR, PB1AP);
-		mtdcr(EBC0_CFGDATA, FLASH_AP);
-		mtdcr(EBC0_CFGADDR, PB1CR);
-		mtdcr(EBC0_CFGDATA, FLASH_CR_B);
-	} else {
-		/* map flash high on CS0 and MPS on CS1 */
-		mtdcr(EBC0_CFGADDR, PB1AP);
-		mtdcr(EBC0_CFGDATA, MPS_AP);
-		mtdcr(EBC0_CFGADDR, PB1CR);
-		mtdcr(EBC0_CFGDATA, MPS_CR);
-		/*
-		 * we use the default values (max values) for the flash
-		 * because its real size is not yet known
-		 */
-		mtdcr(EBC0_CFGADDR, PB0AP);
-		mtdcr(EBC0_CFGDATA, FLASH_AP);
-		mtdcr(EBC0_CFGADDR, PB0CR);
-		mtdcr(EBC0_CFGDATA, FLASH_CR_B);
-	}
-}
-#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) */
-
-#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
-/* adjust flash start and protection info */
-int update_flash_size(int flash_size)
-{
-	int i = 0, mode;
-	flash_info_t *info = &flash_info[0];
-	unsigned long flashcr;
-	unsigned long flash_base = (0 - flash_size) & 0xFFF00000;
-
-	if (flash_size > 128*1024*1024) {
-		printf("\n ### ERROR, wrong flash size: %X, reset board ###\n",
-		       flash_size);
-		hang();
-	}
-
-	if ((flash_size >> 20) != 0)
-		i = __ilog2(flash_size >> 20);
-
-	/* set up flash CS according to the size */
-	mode = get_boot_mode();
-	if (mode & BOOT_MPS) {
-		/* flash is on CS1 */
-		mtdcr(EBC0_CFGADDR, PB1CR);
-		flashcr = mfdcr(EBC0_CFGDATA);
-		/* we map the flash high in every case */
-		flashcr &= 0x0001FFFF; /* mask out address bits */
-		flashcr |= flash_base; /* start addr */
-		flashcr |= (i << 17); /* size addr */
-		mtdcr(EBC0_CFGADDR, PB1CR);
-		mtdcr(EBC0_CFGDATA, flashcr);
-	} else {
-		/* flash is on CS0 */
-		mtdcr(EBC0_CFGADDR, PB0CR);
-		flashcr = mfdcr(EBC0_CFGDATA);
-		/* we map the flash high in every case */
-		flashcr &= 0x0001FFFF; /* mask out address bits */
-		flashcr |= flash_base; /* start addr */
-		flashcr |= (i << 17); /* size addr */
-		mtdcr(EBC0_CFGADDR, PB0CR);
-		mtdcr(EBC0_CFGDATA, flashcr);
-	}
-
-	for (i = 0; i < info->sector_count; i++)
-		/* adjust sector start address */
-		info->start[i] = flash_base +
-				(info->start[i] - CONFIG_SYS_FLASH_BASE);
-
-	/* unprotect all sectors */
-	flash_protect(FLAG_PROTECT_CLEAR,
-		      info->start[0],
-		      0xFFFFFFFF,
-		      info);
-	flash_protect_default();
-	/* protect reset vector too*/
-	flash_protect(FLAG_PROTECT_SET,
-		      info->start[info->sector_count-1],
-		      0xFFFFFFFF,
-		      info);
-
-	return 0;
-}
-#endif
-
-static int
-mpl_prg(uchar *src, ulong size)
-{
-	ulong start;
-	flash_info_t *info = &flash_info[0];
-	int i, rc;
-#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) || \
-	defined(CONFIG_TARGET_MIP405T)
-	char *copystr = (char *)src;
-	ulong *magic = (ulong *)src;
-
-	if (uimage_to_cpu (magic[0]) != IH_MAGIC) {
-		puts("Bad Magic number\n");
-		return -1;
-	}
-	/* some more checks before we delete the Flash... */
-	/* Checking the ISO_STRING prevents to program a
-	 * wrong Firmware Image into the flash.
-	 */
-	i = 4; /* skip Magic number */
-	while (1) {
-		if (strncmp(&copystr[i], "MEV-", 4) == 0)
-			break;
-		if (i++ >= 0x100) {
-			puts("Firmware Image for unknown Target\n");
-			return -1;
-		}
-	}
-	/* we have the ISO STRING, check */
-	if (strncmp(&copystr[i], CONFIG_ISO_STRING, sizeof(CONFIG_ISO_STRING)-1) != 0) {
-		printf("Wrong Firmware Image: %s\n", &copystr[i]);
-		return -1;
-	}
-	start = 0 - size;
-
-	/* unprotect sectors used by u-boot */
-	flash_protect(FLAG_PROTECT_CLEAR,
-		      start,
-		      0xFFFFFFFF,
-		      info);
-
-	/* search start sector */
-	for (i = info->sector_count-1; i > 0; i--)
-		if (start >= info->start[i])
-			break;
-
-	/* now erase flash */
-	printf("Erasing at %lx (sector %d) (start %lx)\n",
-				start,i,info->start[i]);
-	if ((rc = flash_erase (info, i, info->sector_count-1)) != 0) {
-		puts("ERROR ");
-		flash_perror(rc);
-		return (1);
-	}
-#endif
-	printf("flash erased, programming from 0x%lx 0x%lx Bytes\n",
-		(ulong)src, size);
-	if ((rc = flash_write ((char *)src, start, size)) != 0) {
-		puts("ERROR ");
-		flash_perror(rc);
-		return (1);
-	}
-	puts("OK programming done\n");
-	return 0;
-}
-
-
-static int
-mpl_prg_image(uchar *ld_addr)
-{
-	unsigned long len;
-	uchar *data;
-	image_header_t *hdr = (image_header_t *)ld_addr;
-	int rc;
-
-#if defined(CONFIG_FIT)
-	if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
-		puts ("Non legacy image format not supported\n");
-		return -1;
-	}
-#endif
-
-	if (!image_check_magic (hdr)) {
-		puts("Bad Magic Number\n");
-		return 1;
-	}
-	image_print_contents (hdr);
-	if (!image_check_os (hdr, IH_OS_U_BOOT)) {
-		puts("No U-Boot Image\n");
-		return 1;
-	}
-	if (!image_check_type (hdr, IH_TYPE_FIRMWARE)) {
-		puts("No Firmware Image\n");
-		return 1;
-	}
-	if (!image_check_hcrc (hdr)) {
-		puts("Bad Header Checksum\n");
-		return 1;
-	}
-	puts("Verifying Checksum ... ");
-	if (!image_check_dcrc (hdr)) {
-		puts("Bad Data CRC\n");
-		return 1;
-	}
-	puts("OK\n");
-
-	data = (uchar *)image_get_data (hdr);
-	len = image_get_data_size (hdr);
-
-	if (image_get_comp (hdr) != IH_COMP_NONE) {
-		uchar *buf;
-		/* reserve space for uncompressed image */
-		if ((buf = malloc(IMAGE_SIZE)) == NULL) {
-			puts("Insufficient space for decompression\n");
-			return 1;
-		}
-
-		switch (image_get_comp (hdr)) {
-		case IH_COMP_GZIP:
-			puts("Uncompressing (GZIP) ... ");
-			rc = gunzip ((void *)(buf), IMAGE_SIZE, data, &len);
-			if (rc != 0) {
-				puts("GUNZIP ERROR\n");
-				free(buf);
-				return 1;
-			}
-			puts("OK\n");
-			break;
-#ifdef CONFIG_BZIP2
-		case IH_COMP_BZIP2:
-			puts("Uncompressing (BZIP2) ... ");
-			{
-			uint retlen = IMAGE_SIZE;
-			rc = BZ2_bzBuffToBuffDecompress ((char *)(buf), &retlen,
-				(char *)data, len, 0, 0);
-			len = retlen;
-			}
-			if (rc != BZ_OK) {
-				printf ("BUNZIP2 ERROR: %d\n", rc);
-				free(buf);
-				return 1;
-			}
-			puts("OK\n");
-			break;
-#endif
-		default:
-			printf ("Unimplemented compression type %d\n",
-				image_get_comp (hdr));
-			free(buf);
-			return 1;
-		}
-
-		rc = mpl_prg(buf, len);
-		free(buf);
-	} else {
-		rc = mpl_prg(data, len);
-	}
-
-	return(rc);
-}
-
-void get_backup_values(backup_t *buf)
-{
-	i2c_read(CONFIG_SYS_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)buf,sizeof(backup_t));
-}
-
-void set_backup_values(int overwrite)
-{
-	backup_t back;
-	int i;
-
-	get_backup_values(&back);
-	if(!overwrite) {
-		if(strncmp(back.signature,"MPL\0",4)==0) {
-			puts("Not possible to write Backup\n");
-			return;
-		}
-	}
-	memcpy(back.signature,"MPL\0",4);
-	i = getenv_f("serial#",back.serial_name,16);
-	if(i < 0) {
-		puts("Not possible to write Backup\n");
-		return;
-	}
-	back.serial_name[16]=0;
-	i = getenv_f("ethaddr",back.eth_addr,20);
-	if(i < 0) {
-		puts("Not possible to write Backup\n");
-		return;
-	}
-	back.eth_addr[20]=0;
-	i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
-}
-
-void clear_env_values(void)
-{
-	backup_t back;
-	unsigned char env_crc[4];
-
-	memset(&back,0xff,sizeof(backup_t));
-	memset(env_crc,0x00,4);
-	i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR,I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
-	i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR,CONFIG_ENV_OFFSET,2,(void *)env_crc,4);
-}
-
-/*
- * check crc of "older" environment
- */
-int check_env_old_size(ulong oldsize)
-{
-	ulong crc, len, new;
-	unsigned off;
-	uchar buf[64];
-
-	/* read old CRC */
-	eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR,
-		     CONFIG_ENV_OFFSET,
-		     (uchar *)&crc, sizeof(ulong));
-
-	new = 0;
-	len = oldsize;
-	off = sizeof(long);
-	len = oldsize-off;
-	while (len > 0) {
-		int n = (len > sizeof(buf)) ? sizeof(buf) : len;
-
-		eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, buf, n);
-		new = crc32 (new, buf, n);
-		len -= n;
-		off += n;
-	}
-
-	return (crc == new);
-}
-
-static ulong oldsizes[] = {
-	0x200,
-	0x800,
-	0
-};
-
-void copy_old_env(ulong size)
-{
-	uchar name_buf[64];
-	uchar value_buf[0x800];
-	uchar c;
-	ulong len;
-	unsigned off;
-	uchar *name, *value;
-
-	name = &name_buf[0];
-	value = &value_buf[0];
-	len=size;
-	off = sizeof(long);
-	while (len > off) {
-		eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, &c, 1);
-		if(c != '=') {
-			*name++=c;
-			off++;
-		}
-		else {
-			*name++='\0';
-			off++;
-			do {
-				eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, &c, 1);
-				*value++=c;
-				off++;
-				if(c == '\0')
-					break;
-			} while(len > off);
-			name = &name_buf[0];
-			value = &value_buf[0];
-			if(strncmp((char *)name,"baudrate",8)!=0) {
-				setenv((char *)name,(char *)value);
-			}
-
-		}
-	}
-}
-
-
-void check_env(void)
-{
-	char *s;
-	int i=0;
-	char buf[32];
-	backup_t back;
-
-	s=getenv("serial#");
-	if(!s) {
-		while(oldsizes[i]) {
-			if(check_env_old_size(oldsizes[i]))
-				break;
-			i++;
-		}
-		if(!oldsizes[i]) {
-			/* no old environment has been found */
-			get_backup_values (&back);
-			if (strncmp (back.signature, "MPL\0", 4) == 0) {
-				sprintf (buf, "%s", back.serial_name);
-				setenv ("serial#", buf);
-				sprintf (buf, "%s", back.eth_addr);
-				setenv ("ethaddr", buf);
-				printf ("INFO:  serial# and ethaddr recovered, use saveenv\n");
-				return;
-			}
-		}
-		else {
-			copy_old_env(oldsizes[i]);
-			puts("INFO:  old environment ajusted, use saveenv\n");
-		}
-	}
-	else {
-		/* check if back up is set */
-		get_backup_values(&back);
-		if(strncmp(back.signature,"MPL\0",4)!=0) {
-			set_backup_values(0);
-		}
-	}
-}
-
-int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	ulong ld_addr;
-	int result;
-	ulong size = IMAGE_SIZE;
-	ulong src = MULTI_PURPOSE_SOCKET_ADDR;
-	backup_t back;
-
-	if (strcmp(argv[1], "flash") == 0)
-	{
-#if defined(CONFIG_CMD_FDC)
-		if (strcmp(argv[2], "floppy") == 0) {
-			char *local_args[3];
-			extern int do_fdcboot (cmd_tbl_t *, int, int, char *[]);
-			puts("\nupdating bootloader image from floppy\n");
-			local_args[0] = argv[0];
-			if(argc==4) {
-				local_args[1] = argv[3];
-				local_args[2] = NULL;
-				ld_addr=simple_strtoul(argv[3], NULL, 16);
-				result=do_fdcboot(cmdtp, 0, 2, local_args);
-			}
-			else {
-				local_args[1] = NULL;
-				ld_addr=CONFIG_SYS_LOAD_ADDR;
-				result=do_fdcboot(cmdtp, 0, 1, local_args);
-			}
-			result=mpl_prg_image((uchar *)ld_addr);
-			return result;
-		}
-#endif
-		if (strcmp(argv[2], "mem") == 0) {
-			if(argc==4) {
-				ld_addr=simple_strtoul(argv[3], NULL, 16);
-			}
-			else {
-				ld_addr=load_addr;
-			}
-			printf ("\nupdating bootloader image from memory at %lX\n",ld_addr);
-			result=mpl_prg_image((uchar *)ld_addr);
-			return result;
-		}
-		if (strcmp(argv[2], "mps") == 0) {
-			puts("\nupdating bootloader image from MPS\n");
-			result=mpl_prg((uchar *)src,size);
-			return result;
-		}
-	}
-	if (strcmp(argv[1], "clearenvvalues") == 0)
-	{
-		if (strcmp(argv[2], "yes") == 0)
-		{
-			clear_env_values();
-			return 0;
-		}
-	}
-	if (strcmp(argv[1], "getback") == 0) {
-		get_backup_values(&back);
-		back.signature[3]=0;
-		back.serial_name[16]=0;
-		back.eth_addr[20]=0;
-		printf("GetBackUp: signature: %s\n",back.signature);
-		printf("           serial#:   %s\n",back.serial_name);
-		printf("           ethaddr:   %s\n",back.eth_addr);
-		return 0;
-	}
-	if (strcmp(argv[1], "setback") == 0) {
-		set_backup_values(1);
-		return 0;
-	}
-	return cmd_usage(cmdtp);
-}
-
-#ifdef CONFIG_VIDEO
-/******************************************************
- * Routines to display the Board information
- * to the screen (since the VGA will be initialized as last,
- * we must resend the infos)
- */
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-extern GraphicDevice ctfb;
-extern int get_boot_mode(void);
-
-void video_get_info_str (int line_number, char *info)
-{
-	/* init video info strings for graphic console */
-	PPC4xx_SYS_INFO sys_info;
-	char rev;
-	int i,boot;
-	unsigned long pvr;
-	char buf[64];
-	char buf1[32], buf2[32], buf3[32], buf4[32];
-	char cpustr[16];
-	char *s, *e, bc;
-	switch (line_number)
-	{
-	case 2:
-		/* CPU and board infos */
-		pvr=get_pvr();
-		get_sys_info (&sys_info);
-		switch (pvr) {
-			case PVR_405GP_RB: rev='B'; break;
-			case PVR_405GP_RC: rev='C'; break;
-			case PVR_405GP_RD: rev='D'; break;
-			case PVR_405GP_RE: rev='E'; break;
-			case PVR_405GPR_RB: rev='B'; break;
-			default:           rev='?'; break;
-		}
-		if(pvr==PVR_405GPR_RB)
-			sprintf(cpustr,"PPC405GPr %c",rev);
-		else
-			sprintf(cpustr,"PPC405GP %c",rev);
-		/* Board info */
-		i=0;
-		s=getenv ("serial#");
-#ifdef CONFIG_PIP405
-		if (!s || strncmp (s, "PIP405", 6)) {
-			strcpy(buf,"### No HW ID - assuming PIP405");
-		}
-#endif
-#if defined(CONFIG_TARGET_MIP405) || defined(CONFIG_TARGET_MIP405T)
-		if (!s || strncmp (s, "MIP405", 6)) {
-			strcpy(buf,"### No HW ID - assuming MIP405");
-		}
-#endif
-		else {
-			for (e = s; *e; ++e) {
-				if (*e == ' ')
-					break;
-			}
-			for (; s < e; ++s) {
-				if (*s == '_') {
-					++s;
-					break;
-				}
-				buf[i++] = *s;
-			}
-			strcpy(&buf[i]," SN ");
-			i+=4;
-			for (; s < e; ++s) {
-				buf[i++] = *s;
-			}
-			buf[i++]=0;
-		}
-		sprintf (info," %s %s %s MHz (%s/%s/%s MHz)",
-			buf, cpustr,
-			strmhz (buf1, gd->cpu_clk),
-			strmhz (buf2, sys_info.freqPLB),
-			strmhz (buf3, sys_info.freqPLB / sys_info.pllOpbDiv),
-			strmhz (buf4, sys_info.freqPLB / sys_info.pllExtBusDiv));
-		return;
-	case 3:
-		/* Memory Info */
-		boot = get_boot_mode();
-		bc = in8 (CONFIG_PORT_ADDR);
-		sprintf(info, " %luMB RAM, %luMB Flash Cfg 0x%02X %s %s",
-			gd->bd->bi_memsize / 0x100000,
-			gd->bd->bi_flashsize / 0x100000,
-			bc,
-			(boot & BOOT_MPS) ? "MPS boot" : "Flash boot",
-			ctfb.modeIdent);
-		return;
-	case 1:
-		strcpy(buf, CONFIG_IDENT_STRING);
-		sprintf (info, " %s", &buf[1]);
-		return;
-    }
-    /* no more info lines */
-    *info = 0;
-    return;
-}
-#endif /* CONFIG_CONSOLE_EXTRA_INFO */
-
-#endif /* CONFIG_VIDEO */
diff --git a/board/mpl/common/common_util.h b/board/mpl/common/common_util.h
deleted file mode 100644
index 127853d..0000000
--- a/board/mpl/common/common_util.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _COMMON_UTIL_H_
-#define _COMMON_UTIL_H_
-
-typedef struct {
-	char signature[4];
-	char serial_name[17];	/* "MIP405_1000xxxxx" */
-	char eth_addr[21];	/* "00:60:C2:0a:00:00" */
-} backup_t;
-
-extern flash_info_t flash_info[];	/* info for FLASH chips */
-
-void get_backup_values(backup_t *buf);
-
-#define BOOT_MPS	0x01
-#define BOOT_PCI	0x02
-int get_boot_mode(void);
-void setup_cs_reloc(void);
-
-void check_env(void);
-
-#endif /* _COMMON_UTIL_H_ */
diff --git a/board/mpl/common/isa.c b/board/mpl/common/isa.c
deleted file mode 100644
index 54ec66b..0000000
--- a/board/mpl/common/isa.c
+++ /dev/null
@@ -1,470 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * TODO: clean-up
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <stdio_dev.h>
-#include "isa.h"
-#include "piix4_pci.h"
-#include "kbd.h"
-#include "video.h"
-
-
-#undef	ISA_DEBUG
-
-#ifdef	ISA_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-#if defined(CONFIG_PIP405)
-
-extern int drv_isa_kbd_init (void);
-
-/* fdc (logical device 0) */
-const SIO_LOGDEV_TABLE sio_fdc[] = {
-	{0x60, 3},			/* set IO to FDPort (3F0) */
-	{0x61, 0xF0},		/* set IO to FDPort (3F0) */
-	{0x70, 06},			/* set IRQ 6 for FDPort */
-	{0x74, 02},			/* set DMA 2 for FDPort */
-	{0xF0, 0x05},		/* set to PS2 type */
-	{0xF1, 0x00},	  /* default value */
-	{0x30, 1},			/* and activate the device */
-	{0xFF, 0}				/* end of device table */
-};
-/* paralell port (logical device 3) */
-const SIO_LOGDEV_TABLE sio_pport[] = {
-	{0x60, 3},			/* set IO to PPort (378) */
-	{0x61, 0x78},		/* set IO to PPort (378) */
-	{0x70, 07},			/* set IRQ 7 for PPort */
-	{0xF1, 00},			/* set PPort to normal */
-	{0x30, 1},			/* and activate the device */
-	{0xFF, 0}				/* end of device table */
-};
-/* paralell port (logical device 3) Floppy assigned to lpt */
-const SIO_LOGDEV_TABLE sio_pport_fdc[] = {
-	{0x60, 3},			/* set IO to PPort (378) */
-	{0x61, 0x78},		/* set IO to PPort (378) */
-	{0x70, 07},			/* set IRQ 7 for PPort */
-	{0xF1, 02},			/* set PPort to Floppy */
-	{0x30, 1},			/* and activate the device */
-	{0xFF, 0}				/* end of device table */
-};
-/* uart 1 (logical device 4) */
-const SIO_LOGDEV_TABLE sio_com1[] = {
-	{0x60, 3},			/* set IO to COM1 (3F8) */
-	{0x61, 0xF8},		/* set IO to COM1 (3F8) */
-	{0x70, 04},			/* set IRQ 4 for COM1 */
-	{0x30, 1},			/* and activate the device */
-	{0xFF, 0}				/* end of device table */
-};
-/* uart 2 (logical device 5) */
-const SIO_LOGDEV_TABLE sio_com2[] = {
-	{0x60, 2},			/* set IO to COM2 (2F8) */
-	{0x61, 0xF8},		/* set IO to COM2 (2F8) */
-	{0x70, 03},			/* set IRQ 3 for COM2 */
-	{0x30, 1},			/* and activate the device */
-	{0xFF, 0}				/* end of device table */
-};
-
-/* keyboard controller (logical device 7) */
-const SIO_LOGDEV_TABLE sio_keyboard[] = {
-	{0x70, 1},			/* set IRQ 1 for keyboard */
-	{0x72, 12},			/* set IRQ 12 for mouse */
-	{0xF0, 0},			/* disable Port92 (this is a PowerPC!!) */
-	{0x30, 1},			/* and activate the device */
-	{0xFF, 0}				/* end of device table */
-};
-
-
-/*******************************************************************************
-* Config SuperIO FDC37C672
-********************************************************************************/
-unsigned char open_cfg_super_IO(int address)
-{
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x55); /* open config */
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x20); /* set address to DEV ID */
-	if(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 0x1)==0x40) /* ok Device ID is correct */
-		return true;
-	else
-		return false;
-}
-
-void close_cfg_super_IO(int address)
-{
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0xAA); /* close config */
-}
-
-
-unsigned char read_cfg_super_IO(int address, unsigned char function, unsigned char regaddr)
-{
-	/* assuming config reg is open */
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
-	return in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1);
-}
-
-void write_cfg_super_IO(int address, unsigned char function, unsigned char regaddr, unsigned char data)
-{
-	/* assuming config reg is open */
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1,data); /* writes the data */
-}
-
-void isa_write_table(SIO_LOGDEV_TABLE *ldt,unsigned char ldev)
-{
-	while (ldt->index != 0xFF) {
-		write_cfg_super_IO(SIO_CFG_PORT, ldev, ldt->index, ldt->val);
-		ldt++;
-	} /* endwhile */
-}
-
-void isa_sio_loadtable(void)
-{
-	char *s = getenv("floppy");
-	/* setup Floppy device 0*/
-	isa_write_table((SIO_LOGDEV_TABLE *)&sio_fdc,0);
-	/* setup parallel port device 3 */
-	if(s && !strncmp(s, "lpt", 3)) {
-		printf("SIO:   Floppy assigned to LPT\n");
-		/* floppy is assigned to the LPT */
-		isa_write_table((SIO_LOGDEV_TABLE *)&sio_pport_fdc,3);
-	}
-	else {
-		/*printf("Floppy assigned to internal port\n");*/
-		isa_write_table((SIO_LOGDEV_TABLE *)&sio_pport,3);
-	}
-	/* setup Com1 port device 4 */
-	isa_write_table((SIO_LOGDEV_TABLE *)&sio_com1,4);
-	/* setup Com2 port device 5 */
-	isa_write_table((SIO_LOGDEV_TABLE *)&sio_com2,5);
-	/* setup keyboards device 7 */
-	isa_write_table((SIO_LOGDEV_TABLE *)&sio_keyboard,7);
-}
-
-
-void isa_sio_setup(void)
-{
-	if (open_cfg_super_IO(SIO_CFG_PORT) == true)
-	{
-		isa_sio_loadtable();
-		close_cfg_super_IO(0x3F0);
-	}
-}
-#endif
-
-/******************************************************************************
- * IRQ Controller
- * we use the Vector mode
- */
-
-struct	isa_irq_action {
-	 interrupt_handler_t *handler;
-	 void *arg;
-	 int count;
-};
-
-static struct isa_irq_action isa_irqs[16];
-
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- */
-static unsigned int cached_irq_mask = 0xfff9;
-
-#define cached_imr1	(unsigned char)cached_irq_mask
-#define cached_imr2	(unsigned char)(cached_irq_mask>>8)
-#define IMR_1		CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_OCW1
-#define IMR_2		CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_OCW1
-#define ICW1_1	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW1
-#define ICW1_2	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW1
-#define ICW2_1	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW2
-#define ICW2_2	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW2
-#define ICW3_1	ICW2_1
-#define ICW3_2	ICW2_2
-#define ICW4_1	ICW2_1
-#define ICW4_2	ICW2_2
-#define ISR_1		ICW1_1
-#define ISR_2		ICW1_2
-
-
-void disable_8259A_irq(unsigned int irq)
-{
-	unsigned int mask = 1 << irq;
-
-	cached_irq_mask |= mask;
-	if (irq & 8)
-		out8(IMR_2,cached_imr2);
-	else
-		out8(IMR_1,cached_imr1);
-}
-
-void enable_8259A_irq(unsigned int irq)
-{
-	unsigned int mask = ~(1 << irq);
-
-	cached_irq_mask &= mask;
-	if (irq & 8)
-		out8(IMR_2,cached_imr2);
-	else
-		out8(IMR_1,cached_imr1);
-}
-/*
-int i8259A_irq_pending(unsigned int irq)
-{
-	unsigned int mask = 1<<irq;
-	int ret;
-
-	if (irq < 8)
-		ret = inb(0x20) & mask;
-	else
-		ret = inb(0xA0) & (mask >> 8);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	return ret;
-}
-*/
-
-/*
- * This function assumes to be called rarely. Switching between
- * 8259A registers is slow.
- */
-int i8259A_irq_real(unsigned int irq)
-{
-	int value;
-	int irqmask = 1<<irq;
-
-	if (irq < 8) {
-		out8(ISR_1,0x0B);		/* ISR register */
-		value = in8(ISR_1) & irqmask;
-		out8(ISR_1,0x0A);		/* back to the IRR register */
-		return value;
-	}
-	out8(ISR_2,0x0B);		/* ISR register */
-	value = in8(ISR_2) & (irqmask >> 8);
-	out8(ISR_2,0x0A);		/* back to the IRR register */
-	return value;
-}
-
-/*
- * Careful! The 8259A is a fragile beast, it pretty
- * much _has_ to be done exactly like this (mask it
- * first, _then_ send the EOI, and the order of EOI
- * to the two 8259s is important!
- */
-void mask_and_ack_8259A(unsigned int irq)
-{
-	unsigned int irqmask = 1 << irq;
-	unsigned int temp_irqmask = cached_irq_mask;
-	/*
-	 * Lightweight spurious IRQ detection. We do not want
-	 * to overdo spurious IRQ handling - it's usually a sign
-	 * of hardware problems, so we only do the checks we can
-	 * do without slowing down good hardware unnecesserily.
-	 *
-	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
-	 * usually resulting from the 8259A-1|2 PICs) occur
-	 * even if the IRQ is masked in the 8259A. Thus we
-	 * can check spurious 8259A IRQs without doing the
-	 * quite slow i8259A_irq_real() call for every IRQ.
-	 * This does not cover 100% of spurious interrupts,
-	 * but should be enough to warn the user that there
-	 * is something bad going on ...
-	 */
-	if (temp_irqmask & irqmask)
-		goto spurious_8259A_irq;
-	temp_irqmask |= irqmask;
-
-handle_real_irq:
-	if (irq & 8) {
-		in8(IMR_2);		/* DUMMY - (do we need this?) */
-		out8(IMR_2,(unsigned char)(temp_irqmask>>8));
-		out8(ISR_2,0x60+(irq&7));/* 'Specific EOI' to slave */
-		out8(ISR_1,0x62);	/* 'Specific EOI' to master-IRQ2 */
-		out8(IMR_2,cached_imr2); /* turn it on again */
-	} else {
-		in8(IMR_1);		/* DUMMY - (do we need this?) */
-		out8(IMR_1,(unsigned char)temp_irqmask);
-		out8(ISR_1,0x60+irq);	/* 'Specific EOI' to master */
-		out8(IMR_1,cached_imr1); /* turn it on again */
-	}
-
-	return;
-
-spurious_8259A_irq:
-	/*
-	 * this is the slow path - should happen rarely.
-	 */
-	if (i8259A_irq_real(irq))
-		/*
-		 * oops, the IRQ _is_ in service according to the
-		 * 8259A - not spurious, go handle it.
-		 */
-		goto handle_real_irq;
-
-	{
-		static int spurious_irq_mask;
-		/*
-		 * At this point we can be sure the IRQ is spurious,
-		 * lets ACK and report it. [once per IRQ]
-		 */
-		if (!(spurious_irq_mask & irqmask)) {
-			PRINTF("spurious 8259A interrupt: IRQ%d.\n", irq);
-			spurious_irq_mask |= irqmask;
-		}
-		/* irq_err_count++; */
-		/*
-		 * Theoretically we do not have to handle this IRQ,
-		 * but in Linux this does not cause problems and is
-		 * simpler for us.
-		 */
-		goto handle_real_irq;
-	}
-}
-
-void init_8259A(void)
-{
-	out8(IMR_1,0xff);	/* mask all of 8259A-1 */
-	out8(IMR_2,0xff);	/* mask all of 8259A-2 */
-
-	out8(ICW1_1,0x11);	/* ICW1: select 8259A-1 init */
-	out8(ICW2_1,0x20 + 0);	/* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
-	out8(ICW3_1,0x04);	/* 8259A-1 (the master) has a slave on IR2 */
-	out8(ICW4_1,0x01);	/* master expects normal EOI */
-	out8(ICW1_2,0x11);	/* ICW2: select 8259A-2 init */
-	out8(ICW2_2,0x20 + 8);	/* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
-	out8(ICW3_2,0x02);	/* 8259A-2 is a slave on master's IR2 */
-	out8(ICW4_2,0x01);	/* (slave's support for AEOI in flat mode
-				    is to be investigated) */
-	udelay(10000);		/* wait for 8259A to initialize */
-	out8(IMR_1,cached_imr1);	/* restore master IRQ mask */
-	udelay(10000);		/* wait for 8259A to initialize */
-	out8(IMR_2,cached_imr2);	/* restore slave IRQ mask */
-}
-
-
-#define PCI_INT_ACK_ADDR 0xEED00000
-
-int handle_isa_int(void)
-{
-	unsigned long irqack;
-	unsigned char irq;
-	/* first we acknokledge the int via the PCI bus */
-	irqack=in32(PCI_INT_ACK_ADDR);
-	/* now we get the ISRs */
-	in8(ISR_2);
-	in8(ISR_1);
-	irq=(unsigned char)irqack;
-	irq-=32;
-/*	if((irq==7)&&((isr1&0x80)==0)) {
-		PRINTF("IRQ7 detected but not in ISR\n");
-	}
-	else {
-*/		/* we should handle cascaded interrupts here also */
-	{
-/*		printf("ISA Irq %d\n",irq); */
-		isa_irqs[irq].count++;
-		if(irq!=2) { /* just swallow the cascade irq 2 */
-			if (isa_irqs[irq].handler != NULL)
-				(*isa_irqs[irq].handler)(isa_irqs[irq].arg);      /* call isr */
-			else {
-				PRINTF ("bogus interrupt vector 0x%x\n", irq);
-			}
-		}
-	}
-	/* issue EOI instruction to clear the IRQ */
-	mask_and_ack_8259A(irq);
-	return 0;
-}
-
-
-/******************************************************************
- * Install and free an ISA interrupt handler.
- */
-
-void isa_irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
-{
-	if (isa_irqs[vec].handler != NULL) {
-		printf ("ISA Interrupt vector %d: handler 0x%x replacing 0x%x\n",
-			vec, (uint)handler, (uint)isa_irqs[vec].handler);
-	}
-	isa_irqs[vec].handler = handler;
-	isa_irqs[vec].arg     = arg;
-	enable_8259A_irq(vec);
-	PRINTF ("Install ISA IRQ %d ==> %p, @ %p mask=%04x\n", vec, handler, &isa_irqs[vec].handler,cached_irq_mask);
-
-}
-
-void isa_irq_free_handler(int vec)
-{
-	disable_8259A_irq(vec);
-	isa_irqs[vec].handler = NULL;
-	isa_irqs[vec].arg     = NULL;
-	PRINTF ("Free ISA IRQ %d mask=%04x\n", vec, cached_irq_mask);
-
-}
-
-/****************************************************************************/
-void isa_init_irq_contr(void)
-{
-	int i;
-	/* disable all Interrupts */
-	/* first write icws controller 1 */
-	for(i=0;i<16;i++)
-	{
-		isa_irqs[i].handler=NULL;
-		isa_irqs[i].arg=NULL;
-		isa_irqs[i].count=0;
-	}
-	init_8259A();
-	out8(IMR_2,0xFF);
-}
-/*************************************************************************/
-
-void isa_show_irq(void)
-{
-	int vec;
-
-	printf ("\nISA Interrupt-Information:\n");
-	printf ("Nr  Routine   Arg       Count\n");
-
-	for (vec=0; vec<16; vec++) {
-		if (isa_irqs[vec].handler != NULL) {
-			printf ("%02d  %08lx  %08lx  %d\n",
-				vec,
-				(ulong)isa_irqs[vec].handler,
-				(ulong)isa_irqs[vec].arg,
-				isa_irqs[vec].count);
-		}
-	}
-}
-
-int isa_irq_get_count(int vec)
-{
-	return(isa_irqs[vec].count);
-}
-
-/******************************************************************
- * Init the ISA bus and devices.
- */
-
-#if defined(CONFIG_PIP405)
-
-int isa_init(void)
-{
-	isa_sio_setup();
-	isa_init_irq_contr();
-	drv_isa_kbd_init();
-	return 0;
-}
-#endif
diff --git a/board/mpl/common/isa.h b/board/mpl/common/isa.h
deleted file mode 100644
index c706d67..0000000
--- a/board/mpl/common/isa.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _ISA_H_
-#define _ISA_H_
-/* Super IO */
-#define SIO_CFG_PORT	0x3F0	/* Config Port Address */
-
-#if defined(CONFIG_PIP405)
-/* table fore SIO initialization */
-typedef struct {
-	const uchar index;
-	const uchar val;
-} SIO_LOGDEV_TABLE;
-
-typedef struct {
-	const uchar ldev;
-	const SIO_LOGDEV_TABLE *ldev_table;
-} SIO_TABLE;
-
-
-unsigned char open_cfg_super_IO(int address);
-unsigned char read_cfg_super_IO(int address, unsigned char function, unsigned char regaddr);
-void write_cfg_super_IO(int address, unsigned char function, unsigned char regaddr, unsigned char data);
-void close_cfg_super_IO(int address);
-void isa_sio_setup(void);
-#endif
-
-void isa_irq_install_handler(int vec, interrupt_handler_t *handler, void *arg);
-void isa_irq_free_handler(int vec);
-int handle_isa_int(void);
-void isa_init_irq_contr(void);
-void isa_show_irq(void);
-int isa_irq_get_count(int vec);
-
-
-#endif
diff --git a/board/mpl/common/kbd.c b/board/mpl/common/kbd.c
deleted file mode 100644
index 36b1694..0000000
--- a/board/mpl/common/kbd.c
+++ /dev/null
@@ -1,625 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Source partly derived from:
- * linux/drivers/char/pc_keyb.c
- */
-#include <common.h>
-#include <console.h>
-#include <asm/processor.h>
-#include <stdio_dev.h>
-#include "isa.h"
-#include "kbd.h"
-
-
-unsigned char kbd_read_status(void);
-unsigned char kbd_read_input(void);
-void kbd_send_data(unsigned char data);
-void disable_8259A_irq(unsigned int irq);
-void enable_8259A_irq(unsigned int irq);
-
-/* used only by send_data - set by keyboard_interrupt */
-
-
-#undef KBG_DEBUG
-
-#ifdef KBG_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-#define KBD_STAT_KOBF		0x01
-#define KBD_STAT_IBF		0x02
-#define KBD_STAT_SYS		0x04
-#define KBD_STAT_CD		0x08
-#define KBD_STAT_LOCK		0x10
-#define KBD_STAT_MOBF		0x20
-#define KBD_STAT_TI_OUT		0x40
-#define KBD_STAT_PARERR		0x80
-
-#define KBD_INIT_TIMEOUT	1000	/* Timeout in ms for initializing the keyboard */
-#define KBC_TIMEOUT		250	/* Timeout in ms for sending to keyboard controller */
-#define KBD_TIMEOUT		2000	/* Timeout in ms for keyboard command acknowledge */
-/*
- *	Keyboard Controller Commands
- */
-
-#define KBD_CCMD_READ_MODE	0x20	/* Read mode bits */
-#define KBD_CCMD_WRITE_MODE	0x60	/* Write mode bits */
-#define KBD_CCMD_GET_VERSION	0xA1	/* Get controller version */
-#define KBD_CCMD_MOUSE_DISABLE	0xA7	/* Disable mouse interface */
-#define KBD_CCMD_MOUSE_ENABLE	0xA8	/* Enable mouse interface */
-#define KBD_CCMD_TEST_MOUSE	0xA9	/* Mouse interface test */
-#define KBD_CCMD_SELF_TEST	0xAA	/* Controller self test */
-#define KBD_CCMD_KBD_TEST	0xAB	/* Keyboard interface test */
-#define KBD_CCMD_KBD_DISABLE	0xAD	/* Keyboard interface disable */
-#define KBD_CCMD_KBD_ENABLE	0xAE	/* Keyboard interface enable */
-#define KBD_CCMD_WRITE_AUX_OBUF	0xD3    /* Write to output buffer as if
-					   initiated by the auxiliary device */
-#define KBD_CCMD_WRITE_MOUSE	0xD4	/* Write the following byte to the mouse */
-
-/*
- *	Keyboard Commands
- */
-
-#define KBD_CMD_SET_LEDS	0xED	/* Set keyboard leds */
-#define KBD_CMD_SET_RATE	0xF3	/* Set typematic rate */
-#define KBD_CMD_ENABLE		0xF4	/* Enable scanning */
-#define KBD_CMD_DISABLE		0xF5	/* Disable scanning */
-#define KBD_CMD_RESET		0xFF	/* Reset */
-
-/*
- *	Keyboard Replies
- */
-
-#define KBD_REPLY_POR		0xAA	/* Power on reset */
-#define KBD_REPLY_ACK		0xFA	/* Command ACK */
-#define KBD_REPLY_RESEND	0xFE	/* Command NACK, send the cmd again */
-
-/*
- *	Status Register Bits
- */
-
-#define KBD_STAT_OBF		0x01	/* Keyboard output buffer full */
-#define KBD_STAT_IBF		0x02	/* Keyboard input buffer full */
-#define KBD_STAT_SELFTEST	0x04	/* Self test successful */
-#define KBD_STAT_CMD		0x08	/* Last write was a command write (0=data) */
-#define KBD_STAT_UNLOCKED	0x10	/* Zero if keyboard locked */
-#define KBD_STAT_MOUSE_OBF	0x20	/* Mouse output buffer full */
-#define KBD_STAT_GTO		0x40	/* General receive/xmit timeout */
-#define KBD_STAT_PERR		0x80	/* Parity error */
-
-#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF)
-
-/*
- *	Controller Mode Register Bits
- */
-
-#define KBD_MODE_KBD_INT	0x01	/* Keyboard data generate IRQ1 */
-#define KBD_MODE_MOUSE_INT	0x02	/* Mouse data generate IRQ12 */
-#define KBD_MODE_SYS		0x04	/* The system flag (?) */
-#define KBD_MODE_NO_KEYLOCK	0x08	/* The keylock doesn't affect the keyboard if set */
-#define KBD_MODE_DISABLE_KBD	0x10	/* Disable keyboard interface */
-#define KBD_MODE_DISABLE_MOUSE	0x20	/* Disable mouse interface */
-#define KBD_MODE_KCC		0x40	/* Scan code conversion to PC format */
-#define KBD_MODE_RFU		0x80
-
-
-#define KDB_DATA_PORT		0x60
-#define KDB_COMMAND_PORT	0x64
-
-#define	LED_SCR			0x01	/* scroll lock led */
-#define	LED_CAP			0x04	/* caps lock led */
-#define	LED_NUM			0x02	/* num lock led */
-
-#define	KBD_BUFFER_LEN		0x20	/* size of the keyboardbuffer */
-
-
-static volatile char kbd_buffer[KBD_BUFFER_LEN];
-static volatile int in_pointer = 0;
-static volatile int out_pointer = 0;
-
-
-static unsigned char num_lock = 0;
-static unsigned char caps_lock = 0;
-static unsigned char scroll_lock = 0;
-static unsigned char shift = 0;
-static unsigned char ctrl = 0;
-static unsigned char alt = 0;
-static unsigned char e0 = 0;
-static unsigned char leds = 0;
-
-#define DEVNAME "kbd"
-
-/* Simple translation table for the keys */
-
-static unsigned char kbd_plain_xlate[] = {
-	0xff,0x1b, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '=','\b','\t',	/* 0x00 - 0x0f */
-	 'q', 'w', 'e', 'r', 't', 'y', 'u', 'i', 'o', 'p', '[', ']','\r',0xff, 'a', 's',	/* 0x10 - 0x1f */
-	 'd', 'f', 'g', 'h', 'j', 'k', 'l', ';','\'', '`',0xff,'\\', 'z', 'x', 'c', 'v',	/* 0x20 - 0x2f */
-	 'b', 'n', 'm', ',', '.', '/',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff,	/* 0x30 - 0x3f */
-	0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1',	/* 0x40 - 0x4f */
-	 '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,  /* 0x50 - 0x5F */
-	'\r',0xff,0xff
-	};
-
-static unsigned char kbd_shift_xlate[] = {
-	0xff,0x1b, '!', '@', '#', '$', '%', '^', '&', '*', '(', ')', '_', '+','\b','\t',	/* 0x00 - 0x0f */
-	 'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '{', '}','\r',0xff, 'A', 'S',	/* 0x10 - 0x1f */
-	 'D', 'F', 'G', 'H', 'J', 'K', 'L', ':', '"', '~',0xff, '|', 'Z', 'X', 'C', 'V',	/* 0x20 - 0x2f */
-	 'B', 'N', 'M', '<', '>', '?',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff,	/* 0x30 - 0x3f */
-	0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1',	/* 0x40 - 0x4f */
-	 '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,  /* 0x50 - 0x5F */
-	'\r',0xff,0xff
-	};
-
-static unsigned char kbd_ctrl_xlate[] = {
-	0xff,0x1b, '1',0x00, '3', '4', '5',0x1E, '7', '8', '9', '0',0x1F, '=','\b','\t',	/* 0x00 - 0x0f */
-	0x11,0x17,0x05,0x12,0x14,0x18,0x15,0x09,0x0f,0x10,0x1b,0x1d,'\n',0xff,0x01,0x13,	/* 0x10 - 0x1f */
-	0x04,0x06,0x08,0x09,0x0a,0x0b,0x0c, ';','\'', '~',0x00,0x1c,0x1a,0x18,0x03,0x16,	/* 0x20 - 0x2f */
-	0x02,0x0e,0x0d, '<', '>', '?',0xff,0xff,0xff,0x00,0xff,0xff,0xff,0xff,0xff,0xff,	/* 0x30 - 0x3f */
-	0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1',	/* 0x40 - 0x4f */
-	 '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,  /* 0x50 - 0x5F */
-	'\r',0xff,0xff
-	};
-
-/******************************************************************
- * Init
- ******************************************************************/
-int isa_kbd_init(void)
-{
-	char* result;
-	result=kbd_initialize();
-	if(result==NULL) {
-		PRINTF("AT Keyboard initialized\n");
-		irq_install_handler(25, (interrupt_handler_t *)handle_isa_int, NULL);
-		isa_irq_install_handler(KBD_INTERRUPT, (interrupt_handler_t *)kbd_interrupt, NULL);
-		return (1);
-	} else {
-		printf("%s\n",result);
-		return (-1);
-	}
-}
-
-#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-extern int overwrite_console (void);
-#else
-int overwrite_console (void)
-{
-	return (0);
-}
-#endif
-
-int drv_isa_kbd_init (void)
-{
-	int error;
-	struct stdio_dev kbddev ;
-	char *stdinname  = getenv ("stdin");
-
-	if(isa_kbd_init()==-1)
-		return -1;
-	memset (&kbddev, 0, sizeof(kbddev));
-	strcpy(kbddev.name, DEVNAME);
-	kbddev.flags =  DEV_FLAGS_INPUT;
-	kbddev.getc = kbd_getc ;
-	kbddev.tstc = kbd_testc ;
-
-	error = stdio_register (&kbddev);
-	if(error==0) {
-		/* check if this is the standard input device */
-		if(strcmp(stdinname,DEVNAME)==0) {
-			/* reassign the console */
-			if(overwrite_console()) {
-				return 1;
-			}
-			error=console_assign(stdin,DEVNAME);
-			if(error==0)
-				return 1;
-			else
-				return error;
-		}
-		return 1;
-	}
-	return error;
-}
-
-/******************************************************************
- * Queue handling
- ******************************************************************/
-/* puts character in the queue and sets up the in and out pointer */
-void kbd_put_queue(char data)
-{
-	if((in_pointer+1)==KBD_BUFFER_LEN) {
-		if(out_pointer==0) {
-			return; /* buffer full */
-		} else{
-			in_pointer=0;
-		}
-	} else {
-		if((in_pointer+1)==out_pointer)
-			return; /* buffer full */
-		in_pointer++;
-	}
-	kbd_buffer[in_pointer]=data;
-	return;
-}
-
-/* test if a character is in the queue */
-int kbd_testc(struct stdio_dev *dev)
-{
-	if(in_pointer==out_pointer)
-		return(0); /* no data */
-	else
-		return(1);
-}
-/* gets the character from the queue */
-int kbd_getc(struct stdio_dev *dev)
-{
-	char c;
-	while(in_pointer==out_pointer);
-	if((out_pointer+1)==KBD_BUFFER_LEN)
-		out_pointer=0;
-	else
-		out_pointer++;
-	c=kbd_buffer[out_pointer];
-	return (int)c;
-
-}
-
-
-/* set LEDs */
-
-void kbd_set_leds(void)
-{
-	if(caps_lock==0)
-		leds&=~LED_CAP; /* switch caps_lock off */
-	else
-		leds|=LED_CAP; /* switch on LED */
-	if(num_lock==0)
-		leds&=~LED_NUM; /* switch LED off */
-	else
-		leds|=LED_NUM;  /* switch on LED */
-	if(scroll_lock==0)
-		leds&=~LED_SCR; /* switch LED off */
-	else
-		leds|=LED_SCR; /* switch on LED */
-	kbd_send_data(KBD_CMD_SET_LEDS);
-	kbd_send_data(leds);
-}
-
-
-void handle_keyboard_event (unsigned char scancode)
-{
-	unsigned char keycode;
-
-	/*  Convert scancode to keycode */
-	PRINTF ("scancode %x\n", scancode);
-	if (scancode == 0xe0) {
-		e0 = 1;		/* special charakters */
-		return;
-	}
-	if (e0 == 1) {
-		e0 = 0;		/* delete flag */
-		if (!(((scancode & 0x7F) == 0x38) ||	/* the right ctrl key */
-		      ((scancode & 0x7F) == 0x1D) ||	/* the right alt key */
-		      ((scancode & 0x7F) == 0x35) ||	/* the right '/' key */
-		      ((scancode & 0x7F) == 0x1C)))
-			/* the right enter key */
-			/* we swallow unknown e0 codes */
-			return;
-	}
-	/* special cntrl keys */
-	switch (scancode) {
-	case 0x2A:
-	case 0x36:		/* shift pressed */
-		shift = 1;
-		return;		/* do nothing else */
-	case 0xAA:
-	case 0xB6:		/* shift released */
-		shift = 0;
-		return;		/* do nothing else */
-	case 0x38:		/* alt pressed */
-		alt = 1;
-		return;		/* do nothing else */
-	case 0xB8:		/* alt released */
-		alt = 0;
-		return;		/* do nothing else */
-	case 0x1d:		/* ctrl pressed */
-		ctrl = 1;
-		return;		/* do nothing else */
-	case 0x9d:		/* ctrl released */
-		ctrl = 0;
-		return;		/* do nothing else */
-	case 0x46:		/* scrollock pressed */
-		scroll_lock = ~scroll_lock;
-		kbd_set_leds ();
-		return;		/* do nothing else */
-	case 0x3A:		/* capslock pressed */
-		caps_lock = ~caps_lock;
-		kbd_set_leds ();
-		return;
-	case 0x45:		/* numlock pressed */
-		num_lock = ~num_lock;
-		kbd_set_leds ();
-		return;
-	case 0xC6:		/* scroll lock released */
-	case 0xC5:		/* num lock released */
-	case 0xBA:		/* caps lock released */
-		return;		/* just swallow */
-	}
-	if ((scancode & 0x80) == 0x80)	/* key released */
-		return;
-	/* now, decide which table we need */
-	if (scancode > (sizeof (kbd_plain_xlate) / sizeof (kbd_plain_xlate[0]))) {	/* scancode not in list */
-		PRINTF ("unkown scancode %X\n", scancode);
-		return;		/* swallow it */
-	}
-	/* setup plain code first */
-	keycode = kbd_plain_xlate[scancode];
-	if (caps_lock == 1) {	/* caps_lock is pressed, overwrite plain code */
-		if (scancode > (sizeof (kbd_shift_xlate) / sizeof (kbd_shift_xlate[0]))) {	/* scancode not in list */
-			PRINTF ("unkown caps-locked scancode %X\n", scancode);
-			return;	/* swallow it */
-		}
-		keycode = kbd_shift_xlate[scancode];
-		if (keycode < 'A') {	/* we only want the alphas capital */
-			keycode = kbd_plain_xlate[scancode];
-		}
-	}
-	if (shift == 1) {	/* shift overwrites caps_lock */
-		if (scancode > (sizeof (kbd_shift_xlate) / sizeof (kbd_shift_xlate[0]))) {	/* scancode not in list */
-			PRINTF ("unkown shifted scancode %X\n", scancode);
-			return;	/* swallow it */
-		}
-		keycode = kbd_shift_xlate[scancode];
-	}
-	if (ctrl == 1) {	/* ctrl overwrites caps_lock and shift */
-		if (scancode > (sizeof (kbd_ctrl_xlate) / sizeof (kbd_ctrl_xlate[0]))) {	/* scancode not in list */
-			PRINTF ("unkown ctrl scancode %X\n", scancode);
-			return;	/* swallow it */
-		}
-		keycode = kbd_ctrl_xlate[scancode];
-	}
-	/* check if valid keycode */
-	if (keycode == 0xff) {
-		PRINTF ("unkown scancode %X\n", scancode);
-		return;		/* swallow unknown codes */
-	}
-
-	kbd_put_queue (keycode);
-	PRINTF ("%x\n", keycode);
-}
-
-/*
- * This reads the keyboard status port, and does the
- * appropriate action.
- *
- */
-unsigned char handle_kbd_event(void)
-{
-	unsigned char status = kbd_read_status();
-	unsigned int work = 10000;
-
-	while ((--work > 0) && (status & KBD_STAT_OBF)) {
-		unsigned char scancode;
-
-		scancode = kbd_read_input();
-
-		/* Error bytes must be ignored to make the
-		   Synaptics touchpads compaq use work */
-		/* Ignore error bytes */
-		if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR)))
-		{
-			if (status & KBD_STAT_MOUSE_OBF)
-				; /* not supported: handle_mouse_event(scancode); */
-			else
-				handle_keyboard_event(scancode);
-		}
-		status = kbd_read_status();
-	}
-	if (!work)
-		PRINTF("pc_keyb: controller jammed (0x%02X).\n", status);
-	return status;
-}
-
-
-/******************************************************************************
- * Lowlevel Part of keyboard section
- */
-unsigned char kbd_read_status(void)
-{
-	return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
-}
-
-unsigned char kbd_read_input(void)
-{
-	return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
-}
-
-void kbd_write_command(unsigned char cmd)
-{
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
-}
-
-void kbd_write_output(unsigned char data)
-{
-	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
-}
-
-int kbd_read_data(void)
-{
-	int val;
-	unsigned char status;
-
-	val = -1;
-	status = kbd_read_status();
-	if (status & KBD_STAT_OBF) {
-		val = kbd_read_input();
-		if (status & (KBD_STAT_GTO | KBD_STAT_PERR))
-			val = -2;
-	}
-	return val;
-}
-
-int kbd_wait_for_input(void)
-{
-	unsigned long timeout;
-	int val;
-
-	timeout = KBD_TIMEOUT;
-	val=kbd_read_data();
-	while(val < 0)
-	{
-		if(timeout--==0)
-			return -1;
-		udelay(1000);
-		val=kbd_read_data();
-	}
-	return val;
-}
-
-
-int kb_wait(void)
-{
-	unsigned long timeout = KBC_TIMEOUT * 10;
-
-	do {
-		unsigned char status = handle_kbd_event();
-		if (!(status & KBD_STAT_IBF))
-			return 0; /* ok */
-		udelay(1000);
-		timeout--;
-	} while (timeout);
-	return 1;
-}
-
-void kbd_write_command_w(int data)
-{
-	if(kb_wait())
-		PRINTF("timeout in kbd_write_command_w\n");
-	kbd_write_command(data);
-}
-
-void kbd_write_output_w(int data)
-{
-	if(kb_wait())
-		PRINTF("timeout in kbd_write_output_w\n");
-	kbd_write_output(data);
-}
-
-void kbd_send_data(unsigned char data)
-{
-	unsigned char status;
-	disable_8259A_irq(1); /* disable interrupt */
-	kbd_write_output_w(data);
-	status = kbd_wait_for_input();
-	if (status == KBD_REPLY_ACK)
-		enable_8259A_irq(1); /* enable interrupt */
-}
-
-
-char * kbd_initialize(void)
-{
-	int status;
-
-	in_pointer = 0; /* delete in Buffer */
-	out_pointer = 0;
-	/*
-	 * Test the keyboard interface.
-	 * This seems to be the only way to get it going.
-	 * If the test is successful a x55 is placed in the input buffer.
-	 */
-	kbd_write_command_w(KBD_CCMD_SELF_TEST);
-	if (kbd_wait_for_input() != 0x55)
-		return "Kbd:   failed self test";
-	/*
-	 * Perform a keyboard interface test.  This causes the controller
-	 * to test the keyboard clock and data lines.  The results of the
-	 * test are placed in the input buffer.
-	 */
-	kbd_write_command_w(KBD_CCMD_KBD_TEST);
-	if (kbd_wait_for_input() != 0x00)
-		return "Kbd:   interface failed self test";
-	/*
-	 * Enable the keyboard by allowing the keyboard clock to run.
-	 */
-	kbd_write_command_w(KBD_CCMD_KBD_ENABLE);
-	status = kbd_wait_for_input();
-	/*
-	 * Reset keyboard. If the read times out
-	 * then the assumption is that no keyboard is
-	 * plugged into the machine.
-	 * This defaults the keyboard to scan-code set 2.
-	 *
-	 * Set up to try again if the keyboard asks for RESEND.
-	 */
-	do {
-		kbd_write_output_w(KBD_CMD_RESET);
-		status = kbd_wait_for_input();
-		if (status == KBD_REPLY_ACK)
-			break;
-		if (status != KBD_REPLY_RESEND) {
-			PRINTF("status: %X\n",status);
-			return "Kbd:   reset failed, no ACK";
-		}
-	} while (1);
-	if (kbd_wait_for_input() != KBD_REPLY_POR)
-		return "Kbd:   reset failed, no POR";
-
-	/*
-	 * Set keyboard controller mode. During this, the keyboard should be
-	 * in the disabled state.
-	 *
-	 * Set up to try again if the keyboard asks for RESEND.
-	 */
-	do {
-		kbd_write_output_w(KBD_CMD_DISABLE);
-		status = kbd_wait_for_input();
-		if (status == KBD_REPLY_ACK)
-			break;
-		if (status != KBD_REPLY_RESEND)
-			return "Kbd:   disable keyboard: no ACK";
-	} while (1);
-
-	kbd_write_command_w(KBD_CCMD_WRITE_MODE);
-	kbd_write_output_w(KBD_MODE_KBD_INT
-			      | KBD_MODE_SYS
-			      | KBD_MODE_DISABLE_MOUSE
-			      | KBD_MODE_KCC);
-
-	/* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
-	kbd_write_command_w(KBD_CCMD_READ_MODE);
-	if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
-		/*
-		 * If the controller does not support conversion,
-		 * Set the keyboard to scan-code set 1.
-		 */
-		kbd_write_output_w(0xF0);
-		kbd_wait_for_input();
-		kbd_write_output_w(0x01);
-		kbd_wait_for_input();
-	}
-	kbd_write_output_w(KBD_CMD_ENABLE);
-	if (kbd_wait_for_input() != KBD_REPLY_ACK)
-		return "Kbd:   enable keyboard: no ACK";
-
-	/*
-	 * Finally, set the typematic rate to maximum.
-	 */
-	kbd_write_output_w(KBD_CMD_SET_RATE);
-	if (kbd_wait_for_input() != KBD_REPLY_ACK)
-		return "Kbd:   Set rate: no ACK";
-	kbd_write_output_w(0x00);
-	if (kbd_wait_for_input() != KBD_REPLY_ACK)
-		return "Kbd:   Set rate: no ACK";
-	return NULL;
-}
-
-void kbd_interrupt(void)
-{
-	handle_kbd_event();
-}
diff --git a/board/mpl/common/kbd.h b/board/mpl/common/kbd.h
deleted file mode 100644
index b549e20..0000000
--- a/board/mpl/common/kbd.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _KBD_H_
-#define _KBD_H_
-
-struct stdio_dev;
-
-int kbd_testc(struct stdio_dev *sdev);
-int kbd_getc(struct stdio_dev *sdev);
-extern void kbd_interrupt(void);
-extern char *kbd_initialize(void);
-
-unsigned char kbd_is_init(void);
-#define KBD_INTERRUPT 1
-#endif
diff --git a/board/mpl/common/pci.c b/board/mpl/common/pci.c
deleted file mode 100644
index ad97ffa..0000000
--- a/board/mpl/common/pci.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0	IBM-pibs
- */
-/*
- * Adapted for PIP405 03.07.01
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * TODO: Clean-up
- */
-
-#include <common.h>
-#include <pci.h>
-#include "isa.h"
-
-#ifdef CONFIG_405GP
-#ifdef CONFIG_PCI
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#include "piix4_pci.h"
-#include "pci_parts.h"
-
-void pci_405gp_init(struct pci_controller *hose);
-
-void pci_pip405_write_regs(struct pci_controller *hose, pci_dev_t dev,
-		struct pci_config_table *entry)
-{
-	struct pci_pip405_config_entry *table;
-	int i;
-
-	table = (struct pci_pip405_config_entry *)entry->priv[0];
-
-	for (i = 0; table[i].width; i++) {
-#ifdef DEBUG
-		printf("Reg 0x%02X Value 0x%08lX Width %02d written\n",
-		       table[i].index, table[i].val, table[i].width);
-#endif
-
-		switch (table[i].width) {
-		case 1:
-		    pci_hose_write_config_byte(hose, dev,
-					       table[i].index, table[i].val);
-		    break;
-		case 2:
-		    pci_hose_write_config_word(hose, dev,
-					       table[i].index, table[i].val);
-		    break;
-		case 4:
-		    pci_hose_write_config_dword(hose, dev,
-						table[i].index, table[i].val);
-		    break;
-		}
-	}
-}
-
-
-static void pci_pip405_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
-	unsigned char int_line = 0xff;
-	unsigned char pin;
-	/*
-	 * Write pci interrupt line register
-	 */
-	if (PCI_DEV(dev) == 0) /* Device0 = PPC405 -> skip */
-		return;
-	pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin);
-	if ((pin == 0) || (pin > 4))
-		return;
-
-	int_line = ((PCI_DEV(dev) + (pin-1) + 10) % 4) + 28;
-	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
-#ifdef DEBUG
-	printf("Fixup IRQ: dev %d (%x) int line %d 0x%x\n",
-	       PCI_DEV(dev), dev, int_line, int_line);
-#endif
-}
-
-
-static struct pci_controller hose = {
-config_table: pci_pip405_config_table,
-fixup_irq : pci_pip405_fixup_irq,
-};
-
-
-void pci_init_board(void)
-{
-	/*we want the ptrs to RAM not flash (ie don't use init list)*/
-	hose.fixup_irq    = pci_pip405_fixup_irq;
-	hose.config_table = pci_pip405_config_table;
-#ifdef DEBUG
-	printf("Init PCI: fixup_irq=%p config_table=%p hose=%p\n",
-	       pci_pip405_fixup_irq, pci_pip405_config_table, hose);
-#endif
-	pci_405gp_init(&hose);
-}
-
-#endif /* CONFIG_PCI */
-#endif /* CONFIG_405GP */
diff --git a/board/mpl/common/pci_parts.h b/board/mpl/common/pci_parts.h
deleted file mode 100644
index 75e8cae..0000000
--- a/board/mpl/common/pci_parts.h
+++ /dev/null
@@ -1,176 +0,0 @@
- /*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _PCI_PARTS_H_
-#define _PCI_PARTS_H_
-
-
-/* Board specific file containing:
- * - PCI Memory Mapping
- * - PCI IO Mapping
- * - PCI Interrupt Mapping
- */
-
-/* PIP405 PCI INT Routing:
- *                      IRQ0  VECTOR
- * PIXX4 IDSEL  = AD16  INTA#  28 (Function 2 USB is INTD# = 31)
- * VGA   IDSEL  = AD17  INTB#  29
- * SCSI  IDSEL  = AD18  INTC#  30
- * PC104 IDSEL0 = AD20  INTA#  28
- * PC104 IDSEL1 = AD21  INTB#  29
- * PC104 IDSEL2 = AD22  INTC#  30
- * PC104 IDSEL3 = AD23  INTD#  31
- *
- * busdevfunc = EXXX XXXX BBBB BBBB DDDD DFFF RRRR RR00
- *              ^         ^         ^     ^   ^
- *             31        23        15    10   7
- * E = Enabled
- * B = Bussnumber
- * D = Devicenumber (Device0 = AD10)
- * F = Functionnumber
- * R = Registernumber
- *
- * Device = (busdevfunc>>11) + 10
- * Vector = devicenumber % 4 + 28
- *
- */
-#define PCI_HIGHEST_ON_BOARD_ID	19
-/*#define PCI_DEV_NUMBER(x)	(((x>>11) & 0x1f) + 10) */
-#define PCI_IRQ_VECTOR(x)	((PCI_DEV(x) + 10) % 4) + 28
-
-
-/* PCI Device List for PIP405 */
-
-/* Mapping:
- * +-------------+------------+------------+--------------------------------+
- * | PCI MemAddr | PCI IOAddr | Local Addr | Device / Function              |
- * +-------------+------------+------------+--------------------------------+
- * |  0x00000000 |            | 0xA0000000 | ISA Memory (hard wired)        |
- * |  0x00FFFFFF |            | 0xA0FFFFFF |                                |
- * +-------------+------------+------------+--------------------------------+
- * |             | 0x00000000 | 0xE8000000 | ISA IO (hard wired)            |
- * |             | 0x0000FFFF | 0xE800FFFF |                                |
- * +-------------+------------+------------+--------------------------------+
- * |  0x80000000 |            | 0x80000000 | VGA Controller Memory          |
- * |  0x80FFFFFF |            | 0x80FFFFFF |                                |
- * +-------------+------------+------------+--------------------------------+
- * |  0x81000000 |            | 0x81000000 | SCSI Controller Memory         |
- * |  0x81FFFFFF |            | 0x81FFFFFF |                                |
- * +-------------+------------+------------+--------------------------------+
- */
-
-struct pci_pip405_config_entry {
-	int		index;	/* address */
-	unsigned long	val;	/* value */
-	int		width;	/* data size */
-};
-
-extern void pci_pip405_write_regs(struct pci_controller *,
-				  pci_dev_t,
-				  struct pci_config_table *);
-
-/* PIIX4 ISA Bridge Function 0 */
-static struct pci_pip405_config_entry piix4_isa_bridge_f0[] = {
-	{PCI_CFG_PIIX4_SERIRQ,	0xD0,		1}, /* enable Continous SERIRQ Pin */
-	{PCI_CFG_PIIX4_GENCFG,	0x00018041,	4}, /* enable SERIRQs, ISA, PNP, GPI11 */
-	{PCI_CFG_PIIX4_TOM,	0xFE,		1}, /* Top of Memory		*/
-	{PCI_CFG_PIIX4_XBCS,	0x02C4,		2}, /* disable all peri CS	*/
-	{PCI_CFG_PIIX4_RTCCFG,	0x21,		1}, /* enable RTC		*/
-#if defined(CONFIG_PIP405)
-	{PCI_CFG_PIIX4_MBDMA,	0x82,		1}, /* set MBDMA0 to DMA 2	*/
-	{PCI_CFG_PIIX4_MBDMA+1,	0x83,		1}, /* set MBDMA1 to DMA 3	*/
-#endif
-	{PCI_CFG_PIIX4_DLC,	0x0,		1}, /* disable passive release feature */
-	{ }					    /* end of device table	*/
-};
-
-/* PIIX4 IDE Controller Function 1 */
-static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
-	{PCI_CFG_PIIX4_BMIBA,	0x0001000,	4}, /* set BMI to a valid address */
-	{PCI_COMMAND,		0x0001,		2}, /* enable IO access	*/
-#if !defined(CONFIG_TARGET_MIP405T)
-	{PCI_CFG_PIIX4_IDETIM,	0x80008000,	4}, /* enable Both IDE channels	*/
-#else
-	{PCI_CFG_PIIX4_IDETIM,	0x00008000,	4}, /* enable IDE channel0	*/
-#endif
-	{ }					    /* end of device table	*/
-};
-
-/* PIIX4 USB Controller Function 2 */
-static struct pci_pip405_config_entry piix4_usb_cntrl_f2[] = {
-#if !defined(CONFIG_TARGET_MIP405T)
-	{PCI_INTERRUPT_LINE,	31,		1}, /* Int vector = 31		*/
-	{PCI_BASE_ADDRESS_4,	0x0000E001,	4}, /* Set IO Address to 0xe000 to 0xe01F */
-	{PCI_LATENCY_TIMER,	0x80,		1}, /* Latency Timer 0x80	*/
-	{0xC0,			0x2000,		2}, /* Legacy support		*/
-	{PCI_COMMAND,		0x0005,		2}, /* enable IO access and Master */
-#endif
-	{ }					    /* end of device table	*/
-};
-
-/* PIIX4 Power Management Function 3 */
-static struct pci_pip405_config_entry piix4_pmm_cntrl_f3[] = {
-	{PCI_CFG_PIIX4_PMBA,	0x00004000,	4}, /* set PMBA to "valid" value */
-	{PCI_CFG_PIIX4_SMBBA,	0x00005000,	4}, /* set SMBBA to "valid" value */
-	{PCI_CFG_PIIX4_PMMISC,	0x01,		1}, /* enable PMBA IO access	*/
-	{PCI_COMMAND,		0x0001,		2}, /* enable IO access	*/
-	{ }					    /* end of device table	*/
-};
-/* PPC405 Dummy only used to prevent autosetup on this host bridge */
-static struct pci_pip405_config_entry ppc405_dummy[] = {
-	{ }					    /* end of device table	*/
-};
-
-void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
-			 struct pci_config_table *entry);
-
-
-static struct pci_config_table pci_pip405_config_table[]={
-	{PCI_VENDOR_ID_IBM,			/* 405 dummy */
-	 PCI_DEVICE_ID_IBM_405GP,
-	 PCI_ANY_ID,
-	 PCI_ANY_ID, PCI_ANY_ID, 0,
-	 pci_pip405_write_regs, {(unsigned long) ppc405_dummy}},
-
-	{PCI_VENDOR_ID_INTEL,			/* PIIX4 ISA Bridge Function 0 */
-	 PCI_DEVICE_ID_INTEL_82371AB_0,
-	 PCI_ANY_ID,
-	 PCI_ANY_ID, PCI_ANY_ID, 0,
-	 pci_pip405_write_regs, {(unsigned long) piix4_isa_bridge_f0}},
-
-	{PCI_VENDOR_ID_INTEL,			/* PIIX4 IDE Controller Function 1 */
-	 PCI_DEVICE_ID_INTEL_82371AB,
-	 PCI_ANY_ID,
-	 PCI_ANY_ID, PCI_ANY_ID, 1,
-	 pci_pip405_write_regs, {(unsigned long) piix4_ide_cntrl_f1}},
-
-	{PCI_VENDOR_ID_INTEL,			/* PIIX4 USB Controller Function 2 */
-	 PCI_DEVICE_ID_INTEL_82371AB_2,
-	 PCI_ANY_ID,
-	 PCI_ANY_ID, PCI_ANY_ID, 2,
-	 pci_pip405_write_regs, {(unsigned long) piix4_usb_cntrl_f2}},
-
-	{PCI_VENDOR_ID_INTEL,			/* PIIX4 USB Controller Function 3 */
-	 PCI_DEVICE_ID_INTEL_82371AB_3,
-	 PCI_ANY_ID,
-	 PCI_ANY_ID, PCI_ANY_ID, 3,
-	 pci_pip405_write_regs, {(unsigned long) piix4_pmm_cntrl_f3}},
-
-	{PCI_ANY_ID,
-	 PCI_ANY_ID,
-	 PCI_CLASS_DISPLAY_VGA,
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 pci_405gp_setup_vga},
-
-	{PCI_ANY_ID,
-	 PCI_ANY_ID,
-	 PCI_CLASS_NOT_DEFINED_VGA,
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 pci_405gp_setup_vga},
-
-	{ }
-};
-#endif /* _PCI_PARTS_H_ */
diff --git a/board/mpl/common/piix4_pci.h b/board/mpl/common/piix4_pci.h
deleted file mode 100644
index c19b64e..0000000
--- a/board/mpl/common/piix4_pci.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#ifndef _PIIX4_PCI_H
-#define _PIIX4_PCI_H
-
-/***************************************************************************
-* Defines PIIX4 Config Registers
-****************************************************************************/
-
-/* Function 0 ISA Bridge */
-#define	PCI_CFG_PIIX4_IORT		0x4C	/* 8 bit ISA Recovery Timer Reg (default 0x4D) */
-#define	PCI_CFG_PIIX4_XBCS		0x4E	/* 16 bit XBus Chip select reg (default 0x0003) */
-#define	PCI_CFG_PIIX4_PIRQC		0x60  /* PCI IRQ Route Register 4 x 8bit (default )*/
-#define	PCI_CFG_PIIX4_SERIRQ	0x64
-#define	PCI_CFG_PIIX4_TOM			0x69
-#define	PCI_CFG_PIIX4_MSTAT		0x6A
-#define	PCI_CFG_PIIX4_MBDMA		0x76
-#define	PCI_CFG_PIIX4_APICBS	0x80
-#define	PCI_CFG_PIIX4_DLC			0x82
-#define	PCI_CFG_PIIX4_PDMACFG	0x90
-#define	PCI_CFG_PIIX4_DDMABS	0x92
-#define	PCI_CFG_PIIX4_GENCFG	0xB0
-#define	PCI_CFG_PIIX4_RTCCFG	0xCB
-
-/* IO Addresses */
-#define PIIX4_ISA_DMA1_CH0BA	0x00
-#define PIIX4_ISA_DMA1_CH0CA	0x01
-#define PIIX4_ISA_DMA1_CH1BA	0x02
-#define PIIX4_ISA_DMA1_CH1CA	0x03
-#define PIIX4_ISA_DMA1_CH2BA	0x04
-#define PIIX4_ISA_DMA1_CH2CA	0x05
-#define PIIX4_ISA_DMA1_CH3BA	0x06
-#define PIIX4_ISA_DMA1_CH3CA	0x07
-#define PIIX4_ISA_DMA1_CMDST	0x08
-#define PIIX4_ISA_DMA1_REQ		0x09
-#define PIIX4_ISA_DMA1_WSBM		0x0A
-#define PIIX4_ISA_DMA1_CH_MOD	0x0B
-#define PIIX4_ISA_DMA1_CLR_PT	0x0C
-#define PIIX4_ISA_DMA1_M_CLR	0x0D
-#define PIIX4_ISA_DMA1_CLR_M	0x0E
-#define PIIX4_ISA_DMA1_RWAMB	0x0F
-
-#define PIIX4_ISA_DMA2_CH0BA	0xC0
-#define PIIX4_ISA_DMA2_CH0CA	0xC1
-#define PIIX4_ISA_DMA2_CH1BA	0xC2
-#define PIIX4_ISA_DMA2_CH1CA	0xC3
-#define PIIX4_ISA_DMA2_CH2BA	0xC4
-#define PIIX4_ISA_DMA2_CH2CA	0xC5
-#define PIIX4_ISA_DMA2_CH3BA	0xC6
-#define PIIX4_ISA_DMA2_CH3CA	0xC7
-#define PIIX4_ISA_DMA2_CMDST	0xD0
-#define PIIX4_ISA_DMA2_REQ		0xD2
-#define PIIX4_ISA_DMA2_WSBM		0xD4
-#define PIIX4_ISA_DMA2_CH_MOD	0xD6
-#define PIIX4_ISA_DMA2_CLR_PT	0xD8
-#define PIIX4_ISA_DMA2_M_CLR	0xDA
-#define PIIX4_ISA_DMA2_CLR_M	0xDC
-#define PIIX4_ISA_DMA2_RWAMB	0xDE
-
-#define PIIX4_ISA_INT1_ICW1		0x20
-#define PIIX4_ISA_INT1_OCW2		0x20
-#define PIIX4_ISA_INT1_OCW3		0x20
-#define PIIX4_ISA_INT1_ICW2		0x21
-#define PIIX4_ISA_INT1_ICW3		0x21
-#define PIIX4_ISA_INT1_ICW4		0x21
-#define PIIX4_ISA_INT1_OCW1		0x21
-
-#define PIIX4_ISA_INT1_ELCR		0x4D0
-
-#define PIIX4_ISA_INT2_ICW1		0xA0
-#define PIIX4_ISA_INT2_OCW2		0xA0
-#define PIIX4_ISA_INT2_OCW3		0xA0
-#define PIIX4_ISA_INT2_ICW2		0xA1
-#define PIIX4_ISA_INT2_ICW3		0xA1
-#define PIIX4_ISA_INT2_ICW4		0xA1
-#define PIIX4_ISA_INT2_OCW1		0xA1
-#define PIIX4_ISA_INT2_IMR		0xA1 /* read only */
-
-#define PIIX4_ISA_INT2_ELCR		0x4D1
-
-#define PIIX4_ISA_TMR0_CNT_ST	0x40
-#define PIIX4_ISA_TMR1_CNT_ST	0x41
-#define PIIX4_ISA_TMR2_CNT_ST	0x42
-#define PIIX4_ISA_TMR_TCW			0x43
-
-#define PIIX4_ISA_RST_XBUS		0x60
-
-#define PIIX4_ISA_NMI_CNT_ST	0x61
-#define PIIX4_ISA_NMI_ENABLE	0x70
-
-#define PIIX4_ISA_RTC_INDEX		0x70
-#define PIIX4_ISA_RTC_DATA		0x71
-#define PIIX4_ISA_RTCEXT_IND	0x70
-#define PIIX4_ISA_RTCEXT_DATA	0x71
-
-#define PIIX4_ISA_DMA1_CH2LPG	0x81
-#define PIIX4_ISA_DMA1_CH3LPG	0x82
-#define PIIX4_ISA_DMA1_CH1LPG	0x83
-#define PIIX4_ISA_DMA1_CH0LPG	0x87
-#define PIIX4_ISA_DMA2_CH2LPG	0x89
-#define PIIX4_ISA_DMA2_CH3LPG	0x8A
-#define PIIX4_ISA_DMA2_CH1LPG	0x8B
-#define PIIX4_ISA_DMA2_LPGRFR	0x8F
-
-#define PIIX4_ISA_PORT_92			0x92
-
-#define PIIX4_ISA_APM_CONTRL	0xB2
-#define PIIX4_ISA_APM_STATUS	0xB3
-
-#define PIIX4_ISA_COCPU_ERROR	0xF0
-
-/* Function 1 IDE Controller */
-#define	PCI_CFG_PIIX4_BMIBA		0x20
-#define	PCI_CFG_PIIX4_IDETIM	0x40
-#define	PCI_CFG_PIIX4_SIDETIM	0x44
-#define	PCI_CFG_PIIX4_UDMACTL	0x48
-#define	PCI_CFG_PIIX4_UDMATIM 0x4A
-
-/* Function 2 USB Controller */
-#define	PCI_CFG_PIIX4_SBRNUM	0x60
-#define	PCI_CFG_PIIX4_LEGSUP	0xC0
-
-/* Function 3 Power Management */
-#define	PCI_CFG_PIIX4_PMBA		0x40
-#define	PCI_CFG_PIIX4_CNTA		0x44
-#define	PCI_CFG_PIIX4_CNTB		0x48
-#define	PCI_CFG_PIIX4_GPICTL	0x4C
-#define	PCI_CFG_PIIX4_DEVRESD	0x50
-#define	PCI_CFG_PIIX4_DEVACTA	0x54
-#define	PCI_CFG_PIIX4_DEVACTB	0x58
-#define	PCI_CFG_PIIX4_DEVRESA	0x5C
-#define	PCI_CFG_PIIX4_DEVRESB	0x60
-#define	PCI_CFG_PIIX4_DEVRESC	0x64
-#define	PCI_CFG_PIIX4_DEVRESE	0x68
-#define	PCI_CFG_PIIX4_DEVRESF	0x6C
-#define	PCI_CFG_PIIX4_DEVRESG	0x70
-#define	PCI_CFG_PIIX4_DEVRESH	0x74
-#define	PCI_CFG_PIIX4_DEVRESI	0x78
-#define	PCI_CFG_PIIX4_PMMISC	0x80
-#define	PCI_CFG_PIIX4_SMBBA	0x90
-
-
-#endif
diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c
deleted file mode 100644
index 8399407..0000000
--- a/board/mpl/common/usb_uhci.c
+++ /dev/null
@@ -1,1042 +0,0 @@
-/*
- * Part of this code has been derived from linux:
- * Universal Host Controller Interface driver for USB (take II).
- *
- * (c) 1999-2001 Georg Acher, acher@in.tum.de (executive slave) (base guitar)
- *               Deti Fliegl, deti@fliegl.de (executive slave) (lead voice)
- *               Thomas Sailer, sailer@ife.ee.ethz.ch (chief consultant) (cheer leader)
- *               Roman Weissgaerber, weissg@vienna.at (virt root hub) (studio porter)
- * (c) 2000      Yggdrasil Computing, Inc. (port of new PCI interface support
- *               from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
- * (C) 2000      David Brownell, david-b@pacbell.net (usb-ohci.c)
- *
- * HW-initalization based on material of
- *
- * (C) Copyright 1999 Linus Torvalds
- * (C) Copyright 1999 Johannes Erdfelt
- * (C) Copyright 1999 Randy Dunlap
- * (C) Copyright 1999 Gregory P. Smith
- *
- *
- * Adapted for U-Boot:
- * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/**********************************************************************
- * How it works:
- * -------------
- * The framelist / Transfer descriptor / Queue Heads are similar like
- * in the linux usb_uhci.c.
- *
- * During initialization, the following skeleton is allocated in init_skel:
- *
- *         framespecific           |           common chain
- *
- * framelist[]
- * [  0 ]-----> TD ---------\
- * [  1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL
- *   ...        TD ---------/
- * [1023]-----> TD --------/
- *
- *              ^^             ^^         ^^          ^^          ^^
- *              7 TDs for      1 TD for   Start of    Start of    End Chain
- *              INT (2-128ms)  1ms-INT    CTRL Chain  BULK Chain
- *
- *
- * Since this is a bootloader, the isochronous transfer descriptor have been removed.
- *
- * Interrupt Transfers.
- * --------------------
- * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
- * will be inserted after the appropriate (depending the interval setting) skeleton TD.
- * If an interrupt has been detected the dev->irqhandler is called. The status and number
- * of transferred bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
- * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned,
- * the interrupt TD will be reactivated.
- *
- * Control Transfers
- * -----------------
- * Control Transfers are issued by filling the tmp_td with the appropriate data and connect
- * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued,
- * the programm has to wait for completion. This does not allows asynchronous data transfer.
- *
- * Bulk Transfers
- * --------------
- * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect
- * them to the qh_bulk queue header. Before other control/bulk transfers can be issued,
- * the programm has to wait for completion. This does not allows asynchronous data transfer.
- *
- *
- */
-
-#include <common.h>
-#include <pci.h>
-
-#ifdef CONFIG_USB_UHCI
-
-#include <usb.h>
-#include "usb_uhci.h"
-
-#define USB_MAX_TEMP_TD      128  /* number of temporary TDs for bulk and control transfers */
-#define USB_MAX_TEMP_INT_TD  32   /* number of temporary TDs for Interrupt transfers */
-
-
-#undef USB_UHCI_DEBUG
-
-#ifdef	USB_UHCI_DEBUG
-#define	USB_UHCI_PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define USB_UHCI_PRINTF(fmt,args...)
-#endif
-
-
-static int irqvec = -1;            /* irq vector, if -1 uhci is stopped / reseted */
-unsigned int usb_base_addr;       /* base address */
-
-static uhci_td_t td_int[8];        /* Interrupt Transfer descriptors */
-static uhci_qh_t qh_cntrl;         /* control Queue Head */
-static uhci_qh_t qh_bulk;          /*  bulk Queue Head */
-static uhci_qh_t qh_end;           /* end Queue Head */
-static uhci_td_t td_last;          /* last TD (linked with end chain) */
-
-/* temporary tds */
-static uhci_td_t tmp_td[USB_MAX_TEMP_TD];          /* temporary bulk/control td's  */
-static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD];  /* temporary interrupt td's  */
-
-static unsigned long framelist[1024] __attribute__ ((aligned (0x1000))); /* frame list */
-
-static struct virt_root_hub rh;   /* struct for root hub */
-
-/**********************************************************************
- * some forward decleration
- */
-int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
-						void *buffer, int transfer_len,struct devrequest *setup);
-
-/* fill a td with the approproiate data. Link, status, info and buffer
- * are used by the USB controller itselfes, dev is used to identify the
- * "connected" device
- */
-void usb_fill_td(uhci_td_t* td,unsigned long link,unsigned long status,
-					unsigned long info, unsigned long buffer, unsigned long dev)
-{
-	td->link=swap_32(link);
-	td->status=swap_32(status);
-	td->info=swap_32(info);
-	td->buffer=swap_32(buffer);
-	td->dev_ptr=dev;
-}
-
-/* fill a qh with the approproiate data. Head and element are used by the USB controller
- * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh.
- * Please note, that after completion of the td chain, the entry element is removed /
- * marked invalid by the USB controller.
- */
-void usb_fill_qh(uhci_qh_t* qh,unsigned long head,unsigned long element)
-{
-	qh->head=swap_32(head);
-	qh->element=swap_32(element);
-	qh->dev_ptr=0L;
-}
-
-/* get the status of a td->status
- */
-unsigned long usb_uhci_td_stat(unsigned long status)
-{
-	unsigned long result=0;
-	result |= (status & TD_CTRL_NAK)      ? USB_ST_NAK_REC : 0;
-	result |= (status & TD_CTRL_STALLED)  ? USB_ST_STALLED : 0;
-	result |= (status & TD_CTRL_DBUFERR)  ? USB_ST_BUF_ERR : 0;
-	result |= (status & TD_CTRL_BABBLE)   ? USB_ST_BABBLE_DET : 0;
-	result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0;
-	result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0;
-	result |= (status & TD_CTRL_ACTIVE)   ? USB_ST_NOT_PROC : 0;
-	return result;
-}
-
-/* get the status and the transferred len of a td chain.
- * called from the completion handler
- */
-int usb_get_td_status(uhci_td_t *td,struct usb_device *dev)
-{
-	unsigned long temp,info;
-	unsigned long stat;
-	uhci_td_t *mytd=td;
-
-	if(dev->devnum==rh.devnum)
-		return 0;
-	dev->act_len=0;
-	stat=0;
-	do {
-		temp=swap_32((unsigned long)mytd->status);
-		stat=usb_uhci_td_stat(temp);
-		info=swap_32((unsigned long)mytd->info);
-		if(((info & 0xff)!= USB_PID_SETUP) &&
-				(((info >> 21) & 0x7ff)!= 0x7ff) &&
-				(temp & 0x7FF)!=0x7ff)
-		{  /* if not setup and not null data pack */
-			dev->act_len+=(temp & 0x7FF) + 1; /* the transferred len is act_len + 1 */
-		}
-		if(stat) {           /* status no ok */
-			dev->status=stat;
-			return -1;
-		}
-		temp=swap_32((unsigned long)mytd->link);
-		mytd=(uhci_td_t *)(temp & 0xfffffff0);
-	}while((temp & 0x1)==0); /* process all TDs */
-	dev->status=stat;
-	return 0; /* Ok */
-}
-
-
-/*-------------------------------------------------------------------
- *                         LOW LEVEL STUFF
- *          assembles QHs und TDs for control, bulk and iso
- *-------------------------------------------------------------------*/
-
-/* Submits a control message. That is a Setup, Data and Status transfer.
- * Routine does not wait for completion.
- */
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-										int transfer_len,struct devrequest *setup)
-{
-	unsigned long destination, status;
-	int maxsze = usb_maxpacket(dev, pipe);
-	unsigned long dataptr;
-	int len;
-	int pktsze;
-	int i=0;
-
-	if (!maxsze) {
-		USB_UHCI_PRINTF("uhci_submit_control_urb: pipesize for pipe %lx is zero\n", pipe);
-		return -1;
-	}
-	if(((pipe>>8)&0x7f)==rh.devnum) {
-		/* this is the root hub -> redirect it */
-		return uhci_submit_rh_msg(dev,pipe,buffer,transfer_len,setup);
-	}
-	USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",transfer_len,maxsze);
-	/* The "pipe" thing contains the destination in bits 8--18 */
-	destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */
-	/* 3 errors */
-	status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
-	/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */
-	/*  Build the TD for the control request, try forever, 8 bytes of data */
-	usb_fill_td(&tmp_td[i],UHCI_PTR_TERM ,status, destination | (7 << 21),(unsigned long)setup,(unsigned long)dev);
-#if 0
-	{
-		char *sp=(char *)setup;
-		printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe,
-		    sp[0],sp[1],sp[2],sp[3],sp[4],sp[5],sp[6],sp[7]);
-	}
-#endif
-	dataptr = (unsigned long)buffer;
-	len=transfer_len;
-
-	/* If direction is "send", change the frame from SETUP (0x2D)
-	   to OUT (0xE1). Else change it from SETUP to IN (0x69). */
-	destination = (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN)==0 ? USB_PID_OUT : USB_PID_IN);
-	while (len > 0) {
-		/* data stage */
-		pktsze = len;
-		i++;
-		if (pktsze > maxsze)
-			pktsze = maxsze;
-		destination ^= 1 << TD_TOKEN_TOGGLE;	/* toggle DATA0/1 */
-		usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21),dataptr,(unsigned long)dev);	/* Status, pktsze bytes of data */
-		tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);
-
-		dataptr += pktsze;
-		len -= pktsze;
-	}
-
-	/*  Build the final TD for control status */
-	/* It's only IN if the pipe is out AND we aren't expecting data */
-
-	destination &= ~UHCI_PID;
-	if (((pipe & USB_DIR_IN)==0) || (transfer_len == 0))
-		destination |= USB_PID_IN;
-	else
-		destination |= USB_PID_OUT;
-	destination |= 1 << TD_TOKEN_TOGGLE;	/* End in Data1 */
-	i++;
-	status &=~TD_CTRL_SPD;
-	/* no limit on errors on final packet , 0 bytes of data */
-	usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status | TD_CTRL_IOC, destination | (UHCI_NULL_DATA_SIZE << 21),0,(unsigned long)dev);
-	tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);	/* queue status td */
-	/*	usb_show_td(i+1);*/
-	USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n",i);
-	/* first mark the control QH element terminated */
-	qh_cntrl.element=0xffffffffL;
-	/* set qh active */
-	qh_cntrl.dev_ptr=(unsigned long)dev;
-	/* fill in tmp_td_chain */
-	qh_cntrl.element=swap_32((unsigned long)&tmp_td[0]);
-	return 0;
-}
-
-/*-------------------------------------------------------------------
- * Prepare TDs for bulk transfers.
- */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len)
-{
-	unsigned long destination, status,info;
-	unsigned long dataptr;
-	int maxsze = usb_maxpacket(dev, pipe);
-	int len;
-	int i=0;
-
-	if(transfer_len < 0) {
-		printf("Negative transfer length in submit_bulk\n");
-		return -1;
-	}
-	if (!maxsze)
-		return -1;
-	/* The "pipe" thing contains the destination in bits 8--18. */
-	destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe);
-	/* 3 errors */
-	status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
-	/*	((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */
-	/* Build the TDs for the bulk request */
-	len = transfer_len;
-	dataptr = (unsigned long)buffer;
-	do {
-		int pktsze = len;
-		if (pktsze > maxsze)
-			pktsze = maxsze;
-		/* pktsze bytes of data  */
-		info = destination | (((pktsze - 1)&UHCI_NULL_DATA_SIZE) << 21) |
-			(usb_gettoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)) << TD_TOKEN_TOGGLE);
-
-		if((len-pktsze)==0)
-			status |= TD_CTRL_IOC;	/* last one generates INT */
-
-		usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, info,dataptr,(unsigned long)dev);	/* Status, pktsze bytes of data */
-		if(i>0)
-			tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);
-		i++;
-		dataptr += pktsze;
-		len -= pktsze;
-		usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe));
-	} while (len > 0);
-	/* first mark the bulk QH element terminated */
-	qh_bulk.element=0xffffffffL;
-	/* set qh active */
-	qh_bulk.dev_ptr=(unsigned long)dev;
-	/* fill in tmp_td_chain */
-	qh_bulk.element=swap_32((unsigned long)&tmp_td[0]);
-	return 0;
-}
-
-
-/* search a free interrupt td
- */
-uhci_td_t *uhci_alloc_int_td(void)
-{
-	int i;
-	for(i=0;i<USB_MAX_TEMP_INT_TD;i++) {
-		if(tmp_int_td[i].dev_ptr==0) /* no device assigned -> free TD */
-			return &tmp_int_td[i];
-	}
-	return NULL;
-}
-
-#if 0
-void uhci_show_temp_int_td(void)
-{
-	int i;
-	for(i=0;i<USB_MAX_TEMP_INT_TD;i++) {
-		if((tmp_int_td[i].dev_ptr&0x01)!=0x1L) /* no device assigned -> free TD */
-			printf("temp_td %d is assigned to dev %lx\n",i,tmp_int_td[i].dev_ptr);
-	}
-	printf("all others temp_tds are free\n");
-}
-#endif
-/*-------------------------------------------------------------------
- * submits USB interrupt (ie. polling ;-)
- */
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len, int interval)
-{
-	int nint, n;
-	unsigned long status, destination;
-	unsigned long info,tmp;
-	uhci_td_t *mytd;
-	if (interval < 0 || interval >= 256)
-		return -1;
-
-	if (interval == 0)
-		nint = 0;
-	else {
-		for (nint = 0, n = 1; nint <= 8; nint++, n += n)	/* round interval down to 2^n */
-		 {
-			if(interval < n) {
-				interval = n / 2;
-				break;
-			}
-		}
-		nint--;
-	}
-
-	USB_UHCI_PRINTF("Rounded interval to %i, chain  %i\n", interval, nint);
-	mytd=uhci_alloc_int_td();
-	if(mytd==NULL) {
-		printf("No free INT TDs found\n");
-		return -1;
-	}
-	status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27);
-/*		(urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27);
-*/
-
-	destination =(pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe) | (((transfer_len - 1) & 0x7ff) << 21);
-
-	info = destination | (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) << TD_TOKEN_TOGGLE);
-	tmp = swap_32(td_int[nint].link);
-	usb_fill_td(mytd,tmp,status, info,(unsigned long)buffer,(unsigned long)dev);
-	/* Link it */
-	tmp = swap_32((unsigned long)mytd);
-	td_int[nint].link=tmp;
-
-	usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe));
-
-	return 0;
-}
-
-/**********************************************************************
- * Low Level functions
- */
-
-
-void reset_hc(void)
-{
-
-	/* Global reset for 100ms */
-	out16r( usb_base_addr + USBPORTSC1,0x0204);
-	out16r( usb_base_addr + USBPORTSC2,0x0204);
-	out16r( usb_base_addr + USBCMD,USBCMD_GRESET | USBCMD_RS);
-	/* Turn off all interrupts */
-	out16r(usb_base_addr + USBINTR,0);
-	mdelay(50);
-	out16r( usb_base_addr + USBCMD,0);
-	mdelay(10);
-}
-
-void start_hc(void)
-{
-	int timeout = 1000;
-
-	while(in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) {
-		if (!--timeout) {
-			printf("USBCMD_HCRESET timed out!\n");
-			break;
-		}
-	}
-	/* Turn on all interrupts */
-	out16r(usb_base_addr + USBINTR,USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP);
-	/* Start at frame 0 */
-	out16r(usb_base_addr + USBFRNUM,0);
-	/* set Framebuffer base address */
-	out32r(usb_base_addr+USBFLBASEADD,(unsigned long)&framelist);
-	/* Run and mark it configured with a 64-byte max packet */
-	out16r(usb_base_addr + USBCMD,USBCMD_RS | USBCMD_CF | USBCMD_MAXP);
-}
-
-/* Initialize the skeleton
- */
-void usb_init_skel(void)
-{
-	unsigned long temp;
-	int n;
-
-	for(n=0;n<USB_MAX_TEMP_INT_TD;n++)
-		tmp_int_td[n].dev_ptr=0L; /* no devices connected */
-	/* last td */
-	usb_fill_td(&td_last,UHCI_PTR_TERM,TD_CTRL_IOC ,0,0,0L);
-  /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */
-	/* End Queue Header */
-	usb_fill_qh(&qh_end,UHCI_PTR_TERM,(unsigned long)&td_last);
-	/* Bulk Queue Header */
-	temp=(unsigned long)&qh_end;
-	usb_fill_qh(&qh_bulk,temp | UHCI_PTR_QH,UHCI_PTR_TERM);
-	/* Control Queue Header */
-	temp=(unsigned long)&qh_bulk;
-	usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH,UHCI_PTR_TERM);
-	/* 1ms Interrupt td */
-	temp=(unsigned long)&qh_cntrl;
-	usb_fill_td(&td_int[0],temp | UHCI_PTR_QH,0,0,0,0L);
-	temp=(unsigned long)&td_int[0];
-	for(n=1; n<8; n++)
-		usb_fill_td(&td_int[n],temp,0,0,0,0L);
-	for (n = 0; n < 1024; n++) {
-	/* link all framelist pointers to one of the interrupts */
-		int m, o;
-		if ((n&127)==127)
-			framelist[n]= swap_32((unsigned long)&td_int[0]);
-		else
-			for (o = 1, m = 2; m <= 128; o++, m += m)
-				if ((n & (m - 1)) == ((m - 1) / 2))
-						framelist[n]= swap_32((unsigned long)&td_int[o]);
-	}
-}
-
-/* check the common skeleton for completed transfers, and update the status
- * of the "connected" device. Called from the IRQ routine.
- */
-void usb_check_skel(void)
-{
-	struct usb_device *dev;
-	/* start with the control qh */
-	if(qh_cntrl.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */
-	{
-		dev=(struct usb_device *)qh_cntrl.dev_ptr;
-		usb_get_td_status(&tmp_td[0],dev); /* update status */
-		if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
-			qh_cntrl.dev_ptr=0;
-		}
-	}
-	/* now process the bulk */
-	if(qh_bulk.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */
-	{
-		dev=(struct usb_device *)qh_bulk.dev_ptr;
-		usb_get_td_status(&tmp_td[0],dev); /* update status */
-		if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
-			qh_bulk.dev_ptr=0;
-		}
-	}
-}
-
-/* check the interrupt chain, ubdate the status of the appropriate device,
- * call the appropriate irqhandler and reactivate the TD if the irqhandler
- * returns with 1
- */
-void usb_check_int_chain(void)
-{
-	int i,res;
-	unsigned long link,status;
-	struct usb_device *dev;
-	uhci_td_t *td,*prevtd;
-
-	for(i=0;i<8;i++) {
-		prevtd = &td_int[i]; /* the first previous td is the skeleton td */
-		link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */
-		td=(uhci_td_t *)link; /* assign it */
-		/* all interrupt TDs are finally linked to the td_int[0].
-		 * so we process all until we find the td_int[0].
-		 * if int0 chain points to a QH, we're also done
-	   */
-		while(((i>0) && (link != (unsigned long)&td_int[0])) ||
-					((i==0) && !(swap_32(td->link) &  UHCI_PTR_QH)))
-		{
-			/* check if a device is assigned with this td */
-			status=swap_32(td->status);
-			if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) {
-				/* td is not active and a device is assigned -> call irqhandler */
-				dev=(struct usb_device *)td->dev_ptr;
-				dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transferred length */
-				dev->irq_status=usb_uhci_td_stat(status); /* get status */
-				res=dev->irq_handle(dev); /* call irqhandler */
-				if(res==1) {
-					/* reactivate */
-					status|=TD_CTRL_ACTIVE;
-					td->status=swap_32(status);
-					prevtd=td; /* previous td = this td */
-				}
-				else {
-					prevtd->link=td->link; /* link previous td directly to the nex td -> unlinked */
-					/* remove device pointer */
-					td->dev_ptr=0L;
-				}
-			} /* if we call the irq handler */
-			link=swap_32(td->link) & 0xfffffff0; /* next in chain */
-			td=(uhci_td_t *)link; /* assign it */
-		} /* process all td in this int chain */
-	} /* next interrupt chain */
-}
-
-
-/* usb interrupt service routine.
- */
-void handle_usb_interrupt(void)
-{
-	unsigned short status;
-
-	/*
-	 * Read the interrupt status, and write it back to clear the
-	 * interrupt cause
-	 */
-
-	status = in16r(usb_base_addr + USBSTS);
-
-	if (!status)		/* shared interrupt, not mine */
-		return;
-	if (status != 1) {
-		/* remove host controller halted state */
-		if ((status&0x20) && ((in16r(usb_base_addr+USBCMD) && USBCMD_RS)==0)) {
-			out16r(usb_base_addr + USBCMD, USBCMD_RS | in16r(usb_base_addr + USBCMD));
-		}
-	}
-	usb_check_int_chain(); /* call interrupt handlers for int tds */
-	usb_check_skel(); /* call completion handler for common transfer routines */
-	out16r(usb_base_addr+USBSTS,status);
-}
-
-
-/* init uhci
- */
-int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
-{
-	unsigned char temp;
-	int	busdevfunc;
-
-	busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */
-	if(busdevfunc==-1) {
-		printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID);
-		return -1;
-	}
-	pci_read_config_byte(busdevfunc,PCI_INTERRUPT_LINE,&temp);
-	irqvec = temp;
-	irq_free_handler(irqvec);
-	USB_UHCI_PRINTF("Interrupt Line = %d, is %d\n",irqvec);
-	pci_read_config_byte(busdevfunc,PCI_INTERRUPT_PIN,&temp);
-	USB_UHCI_PRINTF("Interrupt Pin = %ld\n",temp);
-	pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr);
-	USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr);
-	usb_base_addr&=0xFFFFFFF0;
-	usb_base_addr+=CONFIG_SYS_ISA_IO_BASE_ADDRESS;
-	rh.devnum = 0;
-	usb_init_skel();
-	reset_hc();
-	start_hc();
-	irq_install_handler(irqvec, (interrupt_handler_t *)handle_usb_interrupt, NULL);
-	return 0;
-}
-
-/* stop uhci
- */
-int usb_lowlevel_stop(int index)
-{
-	if(irqvec==-1)
-		return 1;
-	irq_free_handler(irqvec);
-	reset_hc();
-	irqvec = -1;
-	return 0;
-}
-
-/*******************************************************************************************
- * Virtual Root Hub
- * Since the uhci does not have a real HUB, we simulate one ;-)
- */
-#undef	USB_RH_DEBUG
-
-#ifdef	USB_RH_DEBUG
-#define	USB_RH_PRINTF(fmt,args...)	printf (fmt ,##args)
-static void usb_display_wValue(unsigned short wValue,unsigned short wIndex);
-static void usb_display_Req(unsigned short req);
-#else
-#define USB_RH_PRINTF(fmt,args...)
-static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) {}
-static void usb_display_Req(unsigned short req) {}
-#endif
-
-#define WANT_USB_ROOT_HUB_HUB_DES
-#include <usbroothubdes.h>
-#undef WANT_USB_ROOT_HUB_HUB_DES
-
-/*
- * Root Hub Control Pipe (interrupt Pipes are not supported)
- */
-
-
-int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len,struct devrequest *cmd)
-{
-	void *data = buffer;
-	int leni = transfer_len;
-	int len = 0;
-	int status = 0;
-	int stat = 0;
-	int i;
-
-	unsigned short cstatus;
-
-	unsigned short bmRType_bReq;
-	unsigned short wValue;
-	unsigned short wIndex;
-	unsigned short wLength;
-
-	if (usb_pipeint(pipe)) {
-		printf("Root-Hub submit IRQ: NOT implemented\n");
-#if 0
-		uhci->rh.urb = urb;
-		uhci->rh.send = 1;
-		uhci->rh.interval = urb->interval;
-		rh_init_int_timer (urb);
-#endif
-		return 0;
-	}
-	bmRType_bReq = cmd->requesttype | cmd->request << 8;
-	wValue = swap_16(cmd->value);
-	wIndex = swap_16(cmd->index);
-	wLength = swap_16(cmd->length);
-	usb_display_Req(bmRType_bReq);
-	for (i = 0; i < 8; i++)
-		rh.c_p_r[i] = 0;
-	USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n",
-	     dev->devnum, 8, cmd->requesttype,cmd->request, wValue, wIndex, wLength);
-
-	switch (bmRType_bReq) {
-		/* Request Destination:
-		   without flags: Device,
-		   RH_INTERFACE: interface,
-		   RH_ENDPOINT: endpoint,
-		   RH_CLASS means HUB here,
-		   RH_OTHER | RH_CLASS  almost ever means HUB_PORT here
-		 */
-
-	case RH_GET_STATUS:
-		*(unsigned short *) data = swap_16(1);
-		len=2;
-		break;
-	case RH_GET_STATUS | RH_INTERFACE:
-		*(unsigned short *) data = swap_16(0);
-		len=2;
-		break;
-	case RH_GET_STATUS | RH_ENDPOINT:
-		*(unsigned short *) data = swap_16(0);
-		len=2;
-		break;
-	case RH_GET_STATUS | RH_CLASS:
-		*(unsigned long *) data = swap_32(0);
-		len=4;
-		break;	/* hub power ** */
-	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-
-		status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1));
-		cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) |
-			((status & USBPORTSC_PEC) >> (3 - 1)) |
-			(rh.c_p_r[wIndex - 1] << (0 + 4));
-		status = (status & USBPORTSC_CCS) |
-			((status & USBPORTSC_PE) >> (2 - 1)) |
-			((status & USBPORTSC_SUSP) >> (12 - 2)) |
-			((status & USBPORTSC_PR) >> (9 - 4)) |
-			(1 << 8) |	/* power on ** */
-			((status & USBPORTSC_LSDA) << (-8 + 9));
-
-		*(unsigned short *) data = swap_16(status);
-		*(unsigned short *) (data + 2) = swap_16(cstatus);
-		len=4;
-		break;
-	case RH_CLEAR_FEATURE | RH_ENDPOINT:
-		switch (wValue) {
-		case (RH_ENDPOINT_STALL):
-			len=0;
-			break;
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | RH_CLASS:
-		switch (wValue) {
-		case (RH_C_HUB_OVER_CURRENT):
-			len=0;	/* hub power over current ** */
-			break;
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
-		usb_display_wValue(wValue,wIndex);
-		switch (wValue) {
-		case (RH_PORT_ENABLE):
-			status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
-			status = (status & 0xfff5) & ~USBPORTSC_PE;
-			out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
-			len=0;
-			break;
-		case (RH_PORT_SUSPEND):
-			status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
-			status = (status & 0xfff5) & ~USBPORTSC_SUSP;
-			out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
-			len=0;
-			break;
-		case (RH_PORT_POWER):
-			len=0;	/* port power ** */
-			break;
-		case (RH_C_PORT_CONNECTION):
-			status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
-			status = (status & 0xfff5) | USBPORTSC_CSC;
-			out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
-			len=0;
-			break;
-		case (RH_C_PORT_ENABLE):
-			status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
-			status = (status & 0xfff5) | USBPORTSC_PEC;
-			out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
-			len=0;
-			break;
-		case (RH_C_PORT_SUSPEND):
-/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
-			len=0;
-			break;
-		case (RH_C_PORT_OVER_CURRENT):
-			len=0;
-			break;
-		case (RH_C_PORT_RESET):
-			rh.c_p_r[wIndex - 1] = 0;
-			len=0;
-			break;
-		}
-		break;
-	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
-		usb_display_wValue(wValue,wIndex);
-		switch (wValue) {
-		case (RH_PORT_SUSPEND):
-			status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
-			status = (status & 0xfff5) | USBPORTSC_SUSP;
-			out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
-			len=0;
-			break;
-		case (RH_PORT_RESET):
-			status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
-			status = (status & 0xfff5) | USBPORTSC_PR;
-			out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
-			mdelay(10);
-			status = (status & 0xfff5) & ~USBPORTSC_PR;
-			out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
-			udelay(10);
-			status = (status & 0xfff5) | USBPORTSC_PE;
-			out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
-			mdelay(10);
-			status = (status & 0xfff5) | 0xa;
-			out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
-			len=0;
-			break;
-		case (RH_PORT_POWER):
-			len=0;	/* port power ** */
-			break;
-		case (RH_PORT_ENABLE):
-			status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
-			status = (status & 0xfff5) | USBPORTSC_PE;
-			out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
-			len=0;
-			break;
-		}
-		break;
-
-	case RH_SET_ADDRESS:
-		rh.devnum = wValue;
-		len=0;
-		break;
-	case RH_GET_DESCRIPTOR:
-		switch ((wValue & 0xff00) >> 8) {
-		case (0x01):	/* device descriptor */
-			i=sizeof(root_hub_config_des);
-			status=i > wLength ? wLength : i;
-			len = leni > status ? status : leni;
-			memcpy (data, root_hub_dev_des, len);
-			break;
-		case (0x02):	/* configuration descriptor */
-			i=sizeof(root_hub_config_des);
-			status=i > wLength ? wLength : i;
-			len = leni > status ? status : leni;
-			memcpy (data, root_hub_config_des, len);
-			break;
-		case (0x03):	/*string descriptors */
-			if(wValue==0x0300) {
-				i=sizeof(root_hub_str_index0);
-				status = i > wLength ? wLength : i;
-				len = leni > status ? status : leni;
-				memcpy (data, root_hub_str_index0, len);
-				break;
-			}
-			if(wValue==0x0301) {
-				i=sizeof(root_hub_str_index1);
-				status = i > wLength ? wLength : i;
-				len = leni > status ? status : leni;
-				memcpy (data, root_hub_str_index1, len);
-				break;
-			}
-			stat = USB_ST_STALLED;
-		}
-		break;
-
-	case RH_GET_DESCRIPTOR | RH_CLASS:
-		root_hub_hub_des[2] = 2;
-		i=sizeof(root_hub_hub_des);
-		status= i > wLength ? wLength : i;
-		len = leni > status ? status : leni;
-		memcpy (data, root_hub_hub_des, len);
-		break;
-	case RH_GET_CONFIGURATION:
-		*(unsigned char *) data = 0x01;
-		len = 1;
-		break;
-	case RH_SET_CONFIGURATION:
-		len=0;
-		break;
-	default:
-		stat = USB_ST_STALLED;
-	}
-	USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n",stat,
-	     in16r(usb_base_addr + USBPORTSC1), in16r(usb_base_addr + USBPORTSC2));
-	dev->act_len=len;
-	dev->status=stat;
-	return stat;
-
-}
-
-/********************************************************************************
- * Some Debug Routines
- */
-
-#ifdef	USB_RH_DEBUG
-
-static void usb_display_Req(unsigned short req)
-{
-	USB_RH_PRINTF("- Root-Hub Request: ");
-	switch (req) {
-	case RH_GET_STATUS:
-		USB_RH_PRINTF("Get Status ");
-		break;
-	case RH_GET_STATUS | RH_INTERFACE:
-		USB_RH_PRINTF("Get Status Interface ");
-		break;
-	case RH_GET_STATUS | RH_ENDPOINT:
-		USB_RH_PRINTF("Get Status Endpoint ");
-		break;
-	case RH_GET_STATUS | RH_CLASS:
-		USB_RH_PRINTF("Get Status Class");
-		break;	/* hub power ** */
-	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-		USB_RH_PRINTF("Get Status Class Others");
-		break;
-	case RH_CLEAR_FEATURE | RH_ENDPOINT:
-		USB_RH_PRINTF("Clear Feature Endpoint ");
-		break;
-	case RH_CLEAR_FEATURE | RH_CLASS:
-		USB_RH_PRINTF("Clear Feature Class ");
-		break;
-	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
-		USB_RH_PRINTF("Clear Feature Other Class ");
-		break;
-	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
-		USB_RH_PRINTF("Set Feature Other Class ");
-		break;
-	case RH_SET_ADDRESS:
-		USB_RH_PRINTF("Set Address ");
-		break;
-	case RH_GET_DESCRIPTOR:
-		USB_RH_PRINTF("Get Descriptor ");
-		break;
-	case RH_GET_DESCRIPTOR | RH_CLASS:
-		USB_RH_PRINTF("Get Descriptor Class ");
-		break;
-	case RH_GET_CONFIGURATION:
-		USB_RH_PRINTF("Get Configuration ");
-		break;
-	case RH_SET_CONFIGURATION:
-		USB_RH_PRINTF("Get Configuration ");
-		break;
-	default:
-		USB_RH_PRINTF("****UNKNOWN**** 0x%04X ",req);
-	}
-	USB_RH_PRINTF("\n");
-
-}
-
-static void usb_display_wValue(unsigned short wValue,unsigned short wIndex)
-{
-	switch (wValue) {
-		case (RH_PORT_ENABLE):
-			USB_RH_PRINTF("Root-Hub: Enable Port %d\n",wIndex);
-			break;
-		case (RH_PORT_SUSPEND):
-			USB_RH_PRINTF("Root-Hub: Suspend Port %d\n",wIndex);
-			break;
-		case (RH_PORT_POWER):
-			USB_RH_PRINTF("Root-Hub: Port Power %d\n",wIndex);
-			break;
-		case (RH_C_PORT_CONNECTION):
-			USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n",wIndex);
-			break;
-		case (RH_C_PORT_ENABLE):
-			USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n",wIndex);
-			break;
-		case (RH_C_PORT_SUSPEND):
-			USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n",wIndex);
-			break;
-		case (RH_C_PORT_OVER_CURRENT):
-			USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",wIndex);
-			break;
-		case (RH_C_PORT_RESET):
-			USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n",wIndex);
-			break;
-		default:
-			USB_RH_PRINTF("Root-Hub: unknown %x %x\n",wValue,wIndex);
-			break;
-	}
-}
-
-#endif
-
-
-#ifdef	USB_UHCI_DEBUG
-
-static int usb_display_td(uhci_td_t *td)
-{
-	unsigned long tmp;
-	int valid;
-
-	printf("TD at %p:\n",td);
-
-	tmp=swap_32(td->link);
-	printf("Link points to 0x%08lX, %s first, %s, %s\n",tmp&0xfffffff0,
-		((tmp & 0x4)==0x4) ? "Depth" : "Breath",
-		((tmp & 0x2)==0x2) ? "QH" : "TD",
-		((tmp & 0x1)==0x1) ? "invalid" : "valid");
-	valid=((tmp & 0x1)==0x0);
-	tmp=swap_32(td->status);
-	printf("     %s %ld Errors %s %s %s \n     %s %s %s %s %s %s\n     Len 0x%lX\n",
-		(((tmp>>29)&0x1)==0x1) ? "SPD Enable" : "SPD Disable",
-		((tmp>>28)&0x3),
-		(((tmp>>26)&0x1)==0x1) ? "Low Speed" : "Full Speed",
-		(((tmp>>25)&0x1)==0x1) ? "ISO " : "",
-		(((tmp>>24)&0x1)==0x1) ? "IOC " : "",
-		(((tmp>>23)&0x1)==0x1) ? "Active " : "Inactive ",
-		(((tmp>>22)&0x1)==0x1) ? "Stalled" : "",
-		(((tmp>>21)&0x1)==0x1) ? "Data Buffer Error" : "",
-		(((tmp>>20)&0x1)==0x1) ? "Babble" : "",
-		(((tmp>>19)&0x1)==0x1) ? "NAK" : "",
-		(((tmp>>18)&0x1)==0x1) ? "Bitstuff Error" : "",
-		(tmp&0x7ff));
-	tmp=swap_32(td->info);
-	printf("     MaxLen 0x%lX\n",((tmp>>21)&0x7FF));
-	printf("     %s Endpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",((tmp>>19)&0x1)==0x1 ? "TOGGLE" : "",
-		((tmp>>15)&0xF),((tmp>>8)&0x7F),tmp&0xFF);
-	tmp=swap_32(td->buffer);
-	printf("     Buffer 0x%08lX\n",tmp);
-	printf("     DEV %08lX\n",td->dev_ptr);
-	return valid;
-}
-
-
-void usb_show_td(int max)
-{
-	int i;
-	if(max>0) {
-		for(i=0;i<max;i++) {
-			usb_display_td(&tmp_td[i]);
-		}
-	}
-	else {
-		i=0;
-		do {
-			printf("tmp_td[%d]\n",i);
-		}while(usb_display_td(&tmp_td[i++]));
-	}
-}
-
-
-#endif
-#endif /* CONFIG_USB_UHCI */
-
-/* EOF */
diff --git a/board/mpl/common/usb_uhci.h b/board/mpl/common/usb_uhci.h
deleted file mode 100644
index 582015f..0000000
--- a/board/mpl/common/usb_uhci.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Note: Part of this code has been derived from linux
- */
-#ifndef _USB_UHCI_H_
-#define _USB_UHCI_H_
-
-
-/* Command register */
-#define USBCMD		0
-#define   USBCMD_RS       0x0001	/* Run/Stop */
-#define   USBCMD_HCRESET  0x0002	/* Host reset */
-#define   USBCMD_GRESET   0x0004	/* Global reset */
-#define   USBCMD_EGSM     0x0008	/* Global Suspend Mode */
-#define   USBCMD_FGR      0x0010	/* Force Global Resume */
-#define   USBCMD_SWDBG    0x0020	/* SW Debug mode */
-#define   USBCMD_CF       0x0040	/* Config Flag (sw only) */
-#define   USBCMD_MAXP     0x0080	/* Max Packet (0 = 32, 1 = 64) */
-
-/* Status register */
-#define USBSTS		2
-#define   USBSTS_USBINT   0x0001	/* Interrupt due to IOC */
-#define   USBSTS_ERROR    0x0002	/* Interrupt due to error */
-#define   USBSTS_RD       0x0004	/* Resume Detect */
-#define   USBSTS_HSE      0x0008	/* Host System Error - basically PCI problems */
-#define   USBSTS_HCPE     0x0010	/* Host Controller Process Error - the scripts were buggy */
-#define   USBSTS_HCH      0x0020	/* HC Halted */
-
-/* Interrupt enable register */
-#define USBINTR		4
-#define   USBINTR_TIMEOUT 0x0001	/* Timeout/CRC error enable */
-#define   USBINTR_RESUME  0x0002	/* Resume interrupt enable */
-#define   USBINTR_IOC     0x0004	/* Interrupt On Complete enable */
-#define   USBINTR_SP      0x0008	/* Short packet interrupt enable */
-
-#define USBFRNUM      6
-#define USBFLBASEADD  8
-#define USBSOF        12
-
-/* USB port status and control registers */
-#define USBPORTSC1	16
-#define USBPORTSC2	18
-#define   USBPORTSC_CCS   0x0001	/* Current Connect Status ("device present") */
-#define   USBPORTSC_CSC   0x0002	/* Connect Status Change */
-#define   USBPORTSC_PE    0x0004	/* Port Enable */
-#define   USBPORTSC_PEC   0x0008	/* Port Enable Change */
-#define   USBPORTSC_LS    0x0030	/* Line Status */
-#define   USBPORTSC_RD    0x0040	/* Resume Detect */
-#define   USBPORTSC_LSDA  0x0100	/* Low Speed Device Attached */
-#define   USBPORTSC_PR    0x0200	/* Port Reset */
-#define   USBPORTSC_SUSP  0x1000	/* Suspend */
-
-/* Legacy support register */
-#define USBLEGSUP 0xc0
-#define USBLEGSUP_DEFAULT 0x2000	/* only PIRQ enable set */
-
-#define UHCI_NULL_DATA_SIZE 0x7ff	/* for UHCI controller TD */
-#define UHCI_PID            0xff	/* PID MASK */
-
-#define UHCI_PTR_BITS       0x000F
-#define UHCI_PTR_TERM       0x0001
-#define UHCI_PTR_QH         0x0002
-#define UHCI_PTR_DEPTH      0x0004
-
-/* for TD <status>: */
-#define TD_CTRL_SPD         (1 << 29)	/* Short Packet Detect */
-#define TD_CTRL_C_ERR_MASK  (3 << 27)	/* Error Counter bits */
-#define TD_CTRL_LS          (1 << 26)	/* Low Speed Device */
-#define TD_CTRL_IOS         (1 << 25)	/* Isochronous Select */
-#define TD_CTRL_IOC         (1 << 24)	/* Interrupt on Complete */
-#define TD_CTRL_ACTIVE      (1 << 23)	/* TD Active */
-#define TD_CTRL_STALLED     (1 << 22)	/* TD Stalled */
-#define TD_CTRL_DBUFERR     (1 << 21)	/* Data Buffer Error */
-#define TD_CTRL_BABBLE      (1 << 20)	/* Babble Detected */
-#define TD_CTRL_NAK         (1 << 19)	/* NAK Received */
-#define TD_CTRL_CRCTIMEO    (1 << 18)	/* CRC/Time Out Error */
-#define TD_CTRL_BITSTUFF    (1 << 17)	/* Bit Stuff Error */
-#define TD_CTRL_ACTLEN_MASK 0x7ff	/* actual length, encoded as n - 1 */
-
-#define TD_CTRL_ANY_ERROR	(TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
-				 TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
-
-#define TD_TOKEN_TOGGLE		19
-
-/* ------------------------------------------------------------------------------------
-   Virtual Root HUB
-   ------------------------------------------------------------------------------------ */
-/* destination of request */
-#define RH_INTERFACE               0x01
-#define RH_ENDPOINT                0x02
-#define RH_OTHER                   0x03
-
-#define RH_CLASS                   0x20
-#define RH_VENDOR                  0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS           0x0080
-#define RH_CLEAR_FEATURE        0x0100
-#define RH_SET_FEATURE          0x0300
-#define RH_SET_ADDRESS          0x0500
-#define RH_GET_DESCRIPTOR       0x0680
-#define RH_SET_DESCRIPTOR       0x0700
-#define RH_GET_CONFIGURATION    0x0880
-#define RH_SET_CONFIGURATION    0x0900
-#define RH_GET_STATE            0x0280
-#define RH_GET_INTERFACE        0x0A80
-#define RH_SET_INTERFACE        0x0B00
-#define RH_SYNC_FRAME           0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP               0x2000
-
-/* Hub port features */
-#define RH_PORT_CONNECTION         0x00
-#define RH_PORT_ENABLE             0x01
-#define RH_PORT_SUSPEND            0x02
-#define RH_PORT_OVER_CURRENT       0x03
-#define RH_PORT_RESET              0x04
-#define RH_PORT_POWER              0x08
-#define RH_PORT_LOW_SPEED          0x09
-#define RH_C_PORT_CONNECTION       0x10
-#define RH_C_PORT_ENABLE           0x11
-#define RH_C_PORT_SUSPEND          0x12
-#define RH_C_PORT_OVER_CURRENT     0x13
-#define RH_C_PORT_RESET            0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER       0x00
-#define RH_C_HUB_OVER_CURRENT      0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP    0x00
-#define RH_ENDPOINT_STALL          0x01
-
-/* Our Vendor Specific feature */
-#define RH_REMOVE_EP               0x00
-
-
-#define RH_ACK                     0x01
-#define RH_REQ_ERR                 -1
-#define RH_NACK                    0x00
-
-
-/* Transfer descriptor structure */
-typedef struct {
-	unsigned long link;     /* next td/qh (LE)*/
-	unsigned long status;   /* status of the td */
-	unsigned long info;     /* Max Lenght / Endpoint / device address and PID */
-	unsigned long buffer;   /* pointer to data buffer (LE) */
-	unsigned long dev_ptr;  /* pointer to the assigned device (BE) */
-	unsigned long res[3];   /* reserved (TDs must be 8Byte aligned) */
-} uhci_td_t, *puhci_td_t;
-
-/* Queue Header structure */
-typedef struct {
-	unsigned long head;       /* Next QH (LE)*/
-	unsigned long element;		/* Queue element pointer (LE) */
-	unsigned long res[5];     /* reserved */
-	unsigned long dev_ptr;    /* if 0 no tds have been assigned to this qh */
-} uhci_qh_t, *puhci_qh_t;
-
-struct virt_root_hub {
-	int devnum;		            /* Address of Root Hub endpoint */
-	int numports;             /* number of ports */
-	int c_p_r[8];             /* C_PORT_RESET */
-};
-
-
-#endif /* _USB_UHCI_H_ */
diff --git a/board/mpl/mip405/Kconfig b/board/mpl/mip405/Kconfig
deleted file mode 100644
index e003a43..0000000
--- a/board/mpl/mip405/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-if TARGET_MIP405 || TARGET_MIP405T
-
-config SYS_BOARD
-	default "mip405"
-
-config SYS_VENDOR
-	default "mpl"
-
-config SYS_CONFIG_NAME
-	default "MIP405"
-
-config ISO_STRING
-	string
-	default "MEV-10082-001" if TARGET_MIP405T
-	default "MEV-10072-001" if TARGET_MIP405
-
-endif
diff --git a/board/mpl/mip405/MAINTAINERS b/board/mpl/mip405/MAINTAINERS
deleted file mode 100644
index b323e5a..0000000
--- a/board/mpl/mip405/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-MIP405 BOARD
-M:	Denis Peter <d.peter@mpl.ch>
-S:	Maintained
-F:	board/mpl/mip405/
-F:	include/configs/MIP405.h
-F:	configs/MIP405_defconfig
-F:	configs/MIP405T_defconfig
diff --git a/board/mpl/mip405/Makefile b/board/mpl/mip405/Makefile
deleted file mode 100644
index 5bcf130..0000000
--- a/board/mpl/mip405/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= mip405.o cmd_mip405.o \
-		../common/pci.o \
-		../common/usb_uhci.o \
-		../common/common_util.o
-obj-y	+= init.o
diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c
deleted file mode 100644
index ca6f0af..0000000
--- a/board/mpl/mip405/cmd_mip405.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * hacked for MIP405
- */
-
-#include <common.h>
-#include <command.h>
-#include "mip405.h"
-#include "../common/common_util.h"
-
-
-extern void print_mip405_info(void);
-extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-
-
-/* ------------------------------------------------------------------------- */
-
-int do_mip405(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-
-	ulong led_on;
-
-	if (strcmp(argv[1], "info") == 0)
-	{
-		print_mip405_info();
-		return 0;
-	}
-	if (strcmp(argv[1], "led") == 0)
-	{
-		led_on = (ulong)simple_strtoul(argv[2], NULL, 10);
-		user_led0(led_on);
-		return 0;
-	}
-	return (do_mplcommon(cmdtp, flag, argc, argv));
-}
-U_BOOT_CMD(
-	mip405,	8,	1,	do_mip405,
-	"MIP405 specific Cmds",
-	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
-	"mip405 flash mps - updates U-Boot with image from MPS\n"
-	"mip405 info      - displays board information\n"
-	"mip405 led <on>  - switches LED on (on=1) or off (on=0)"
-);
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S
deleted file mode 100644
index 2ea2e29..0000000
--- a/board/mpl/mip405/init.S
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0	IBM-pibs
- */
-/*-----------------------------------------------------------------------------
- * Function:     ext_bus_cntlr_init
- * Description:  Initializes the External Bus Controller for the external
- *		peripherals. IMPORTANT: For pass1 this code must run from
- *		cache since you can not reliably change a peripheral banks
- *		timing register (pbxap) while running code from that bank.
- *		For ex., since we are running from ROM on bank 0, we can NOT
- *		execute the code that modifies bank 0 timings from ROM, so
- *		we run it from cache.
- *	Bank 0 - Flash or Multi Purpose Socket
- *	Bank 1 - Multi Purpose Socket or Flash (set in C-Code)
- *	Bank 2 - UART 1 (set in C-Code)
- *	Bank 3 - UART 2 (set in C-Code)
- *	Bank 4 - not used
- *	Bank 5 - not used
- *	Bank 6 - not used
- *	Bank 7 - PLD Register
- *-----------------------------------------------------------------------------*/
-
-#include <configs/MIP405.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx.h>
-#include "mip405.h"
-
-
-  .globl ext_bus_cntlr_init
-ext_bus_cntlr_init:
-  mflr   r4                      /* save link register */
-  mfdcr  r3,CPC0_PSR                /* get strapping reg */
-  andi.  r0, r3, PSR_ROM_LOC     /* mask out irrelevant bits */
-  bnelr                          /* jump back if PCI boot */
-
-  bl      ..getAddr
-..getAddr:
-  mflr    r3                      /* get address of ..getAddr */
-  mtlr    r4                      /* restore link register */
-  addi    r4,0,14                 /* set ctr to 14; used to prefetch */
-  mtctr   r4                      /* 14 cache lines to fit this function */
-				   /* in cache (gives us 8x14=112 instrctns) */
-..ebcloop:
-  icbt    r0,r3                   /* prefetch cache line for addr in r3 */
-  addi    r3,r3,32								/* move to next cache line */
-  bdnz    ..ebcloop               /* continue for 14 cache lines */
-
-   /*-------------------------------------------------------------------
-    * Delay to ensure all accesses to ROM are complete before changing
-    * bank 0 timings.
-    *------------------------------------------------------------------- */
-	addis	r3,0,0x0
-  ori     r3,r3,0xA000
-  mtctr   r3
-..spinlp:
-  bdnz    ..spinlp                /* spin loop */
-
-	/*-----------------------------------------------------------------------
-	 * decide boot up mode
-	 *----------------------------------------------------------------------- */
-	addi		r4,0,PB0CR
-	mtdcr		EBC0_CFGADDR,r4
-	mfdcr		r4,EBC0_CFGDATA
-
-	andi.		r0, r4, 0x2000			/* mask out irrelevant bits */
-	beq		0f				/* jump if 8 bit bus width */
-
-	/* setup 16 bit things
-   *-----------------------------------------------------------------------
-   * Memory Bank 0 (16 Bit Flash) initialization
-   *---------------------------------------------------------------------- */
-
-	addi    r4,0,PB1AP
-	mtdcr   EBC0_CFGADDR,r4
-	addis   r4,0,(FLASH_AP_B)@h
-	ori     r4,r4,(FLASH_AP_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-
-	addi    r4,0,PB0CR
-	mtdcr   EBC0_CFGADDR,r4
-	/* BS=0x010(4MB),BU=0x3(R/W), */
-	addis   r4,0,(FLASH_CR_B)@h
-	ori     r4,r4,(FLASH_CR_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-	b				1f
-
-0:
-
-	/* 8Bit boot mode: */
-	/*-----------------------------------------------------------------------
-	* Memory Bank 0 Multi Purpose Socket initialization
-	*----------------------------------------------------------------------- */
-	/* 0x7F8FFE80 slowest boot */
-	addi    r4,0,PB1AP
-	mtdcr   EBC0_CFGADDR,r4
-	addis   r4,0,(MPS_AP_B)@h
-	ori     r4,r4,(MPS_AP_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-
-	addi    r4,0,PB0CR
-	mtdcr   EBC0_CFGADDR,r4
-	/* BS=0x010(4MB),BU=0x3(R/W), */
-	addis   r4,0,(MPS_CR_B)@h
-	ori     r4,r4,(MPS_CR_B)@l
-
-	mtdcr   EBC0_CFGDATA,r4
-
-
-1:
-  /*-----------------------------------------------------------------------
-   * Memory Bank 2-3-4-5-6 (not used) initialization
-   *-----------------------------------------------------------------------*/
-  addi    r4,0,PB1CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB2CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB3CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB4CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB5CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB6CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB7CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-  nop				/* pass2 DCR errata #8 */
-  blr
-
-#if defined(CONFIG_BOOT_PCI)
-    .section .bootpg,"ax"
-    .globl _start_pci
-/*******************************************
- */
-
-_start_pci:
-  /* first handle errata #68 / PCI_18 */
-  iccci   r0, r0          /* invalidate I-cache */
-  lis     r31, 0
-  mticcr  r31             /* ICCR = 0 (all uncachable) */
-  isync
-
-  mfccr0  r28             /* set CCR0[24] = 1 */
-  ori     r28, r28, 0x0080
-  mtccr0  r28
-
-  /* setup PMM0MA (0xEF400004) and PMM0PCIHA (0xEF40000C) */
-  lis     r28, 0xEF40
-  addi    r28, r28, 0x0004
-  stw     r31, 0x0C(r28)  /* clear PMM0PCIHA */
-  lis     r29, 0xFFF8     /* open 512 kByte */
-  addi    r29, r29, 0x0001/* and enable this region */
-  stwbrx  r29, r0, r28    /* write PMM0MA */
-
-  lis     r28, 0xEEC0     /* address of PCIC0_CFGADDR */
-  addi    r29, r28, 4     /* add 4 to r29 -> PCIC0_CFGDATA */
-
-  lis     r31, 0x8000     /* set en bit bus 0 */
-  ori     r31, r31, 0x304C/* device 6 func 0 reg 4C (XBCS register) */
-  stwbrx  r31, r0, r28    /* write it */
-
-  lwbrx   r31, r0, r29    /* load XBCS register */
-  oris    r31, r31, 0x02C4/* clear BIOSCS WPE, set lower, extended and 1M extended BIOS enable */
-  stwbrx  r31, r0, r29    /* write back XBCS register */
-
-  nop
-  nop
-  b	_start		/* normal start */
-#endif
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
deleted file mode 100644
index 4d8671f..0000000
--- a/board/mpl/mip405/mip405.c
+++ /dev/null
@@ -1,805 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * TODO: clean-up
- */
-
-/*
- * How do I program the SDRAM Timing Register (SDRAM0_TR) for a specific SDRAM or DIMM?
- *
- * As an example, consider a case where PC133 memory with CAS Latency equal to 2 is being
- * used with a 200MHz 405GP. For a typical 128Mb, PC133 SDRAM, the relevant minimum
- * parameters from the datasheet are:
- * Tclk = 7.5ns (CL = 2)
- * Trp = 15ns
- * Trc = 60ns
- * Trcd = 15ns
- * Trfc = 66ns
- *
- * If we are operating the 405GP with the MemClk output frequency set to 100 MHZ, the clock
- * period is 10ns and the parameters needed for the Timing Register are:
- * CASL = CL = 2 clock cycles
- * PTA = Trp = 15ns / 10ns = 2 clock cycles
- * CTP = Trc - Trcd - Trp = (60ns - 15ns - 15ns) / 10ns= 3 clock cycles
- * LDF = 2 clock cycles (but can be extended to meet board-level timing)
- * RFTA = Trfc = 66ns / 10ns= 7 clock cycles
- * RCD = Trcd = 15ns / 10ns= 2 clock cycles
- *
- * The actual bit settings in the register would be:
- *
- * CASL = 0b01
- * PTA = 0b01
- * CTP = 0b10
- * LDF = 0b01
- * RFTA = 0b011
- * RCD = 0b01
- *
- * If Trfc is not specified in the datasheet for PC100 or PC133 memory, set RFTA = Trc
- * instead. Figure 24 in the PC SDRAM Specification Rev. 1.7 shows refresh to active delay
- * defined as Trc rather than Trfc.
- * When using DIMM modules, most but not all of the required timing parameters can be read
- * from the Serial Presence Detect (SPD) EEPROM on the module. Specifically, Trc and Trfc
- * are not available from the EEPROM
- */
-
-#include <common.h>
-#include "mip405.h"
-#include <asm/processor.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc4xx-i2c.h>
-#include <miiphy.h>
-#include "../common/common_util.h"
-#include <stdio_dev.h>
-#include <i2c.h>
-#include <rtc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef SDRAM_DEBUG
-#define ENABLE_ECC /* for ecc boards */
-
-/* stdlib.h causes some compatibility problems; should fixe these! -- wd */
-#ifndef __ldiv_t_defined
-typedef struct {
-	long int quot;		/* Quotient	*/
-	long int rem;		/* Remainder	*/
-} ldiv_t;
-extern ldiv_t ldiv (long int __numer, long int __denom);
-# define __ldiv_t_defined	1
-#endif
-
-
-#define PLD_PART_REG		PER_PLD_ADDR + 0
-#define PLD_VERS_REG		PER_PLD_ADDR + 1
-#define PLD_BOARD_CFG_REG	PER_PLD_ADDR + 2
-#define PLD_IRQ_REG		PER_PLD_ADDR + 3
-#define PLD_COM_MODE_REG	PER_PLD_ADDR + 4
-#define PLD_EXT_CONF_REG	PER_PLD_ADDR + 5
-
-#define MEGA_BYTE (1024*1024)
-
-typedef struct {
-	unsigned char boardtype; /* Board revision and Population Options */
-	unsigned char cal;		/* cas Latency (will be programmend as cal-1) */
-	unsigned char trp;		/* datain27 in clocks */
-	unsigned char trcd;		/* datain29 in clocks */
-	unsigned char tras;		/* datain30 in clocks */
-	unsigned char tctp;		/* tras - trcd in clocks */
-	unsigned char am;		/* Address Mod (will be programmed as am-1) */
-	unsigned char sz;		/* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
-	unsigned char ecc;		/* if true, ecc is enabled */
-} sdram_t;
-#if defined(CONFIG_TARGET_MIP405T)
-const sdram_t sdram_table[] = {
-	{ 0x0F,	/* MIP405T Rev A, 64MByte -1 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		2,	/* Address Mode = 2 (12x9x4) */
-		3,	/* size value (32MByte) */
-		0},	/* ECC disabled */
-	{ 0xff, /* terminator */
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff }
-};
-#else
-const sdram_t sdram_table[] = {
-	{ 0x0f,	/* Rev A, 128MByte -1 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		3,	/* Address Mode = 3 */
-		5,	/* size value */
-		1},	/* ECC enabled */
-	{ 0x07,	/* Rev A, 64MByte -2 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		2,	/* Address Mode = 2 */
-		4,	/* size value */
-		1},	/* ECC enabled */
-	{ 0x03,	/* Rev A, 128MByte -4 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		3,	/* Address Mode = 3 */
-		5,	/* size value */
-		1},	/* ECC enabled */
-	{ 0x1f,	/* Rev B, 128MByte -3 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		3,	/* Address Mode = 3 */
-		5,	/* size value */
-		1},	/* ECC enabled */
-	{ 0x2f,	/* Rev C, 128MByte -3 Board */
-		3,	/* Case Latenty = 3 */
-		3,	/* trp 20ns / 7.5 ns datain[27] */
-		3,	/* trcd 20ns /7.5 ns (datain[29]) */
-		6,	/* tras 44ns /7.5 ns  (datain[30]) */
-		4,	/* tcpt 44 - 20ns = 24ns */
-		3,	/* Address Mode = 3 */
-		5,	/* size value */
-		1},	/* ECC enabled */
-	{ 0xff, /* terminator */
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff,
-	  0xff }
-};
-#endif /*CONFIG_TARGET_MIP405T */
-void SDRAM_err (const char *s)
-{
-#ifndef SDRAM_DEBUG
-	(void) get_clocks ();
-	gd->baudrate = 9600;
-	serial_init ();
-#endif
-	serial_puts ("\n");
-	serial_puts (s);
-	serial_puts ("\n enable SDRAM_DEBUG for more info\n");
-	for (;;);
-}
-
-
-unsigned char get_board_revcfg (void)
-{
-	out8 (PER_BOARD_ADDR, 0);
-	return (in8 (PER_BOARD_ADDR));
-}
-
-
-#ifdef SDRAM_DEBUG
-
-void write_hex (unsigned char i)
-{
-	char cc;
-
-	cc = i >> 4;
-	cc &= 0xf;
-	if (cc > 9)
-		serial_putc (cc + 55);
-	else
-		serial_putc (cc + 48);
-	cc = i & 0xf;
-	if (cc > 9)
-		serial_putc (cc + 55);
-	else
-		serial_putc (cc + 48);
-}
-
-void write_4hex (unsigned long val)
-{
-	write_hex ((unsigned char) (val >> 24));
-	write_hex ((unsigned char) (val >> 16));
-	write_hex ((unsigned char) (val >> 8));
-	write_hex ((unsigned char) val);
-}
-
-#endif
-
-
-int init_sdram (void)
-{
-	unsigned long	tmp, baseaddr;
-	unsigned short	i;
-	unsigned char	trp_clocks,
-			trcd_clocks,
-			tras_clocks,
-			trc_clocks;
-	unsigned char	cal_val;
-	unsigned char	bc;
-	unsigned long	sdram_tim, sdram_bank;
-
-	/*i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);*/
-	(void) get_clocks ();
-	gd->baudrate = 9600;
-	serial_init ();
-	/* set up the pld */
-	mtdcr (EBC0_CFGADDR, PB7AP);
-	mtdcr (EBC0_CFGDATA, PLD_AP);
-	mtdcr (EBC0_CFGADDR, PB7CR);
-	mtdcr (EBC0_CFGDATA, PLD_CR);
-	/* THIS IS OBSOLETE */
-	/* set up the board rev reg*/
-	mtdcr (EBC0_CFGADDR, PB5AP);
-	mtdcr (EBC0_CFGDATA, BOARD_AP);
-	mtdcr (EBC0_CFGADDR, PB5CR);
-	mtdcr (EBC0_CFGDATA, BOARD_CR);
-#ifdef SDRAM_DEBUG
-	/* get all informations from PLD */
-	serial_puts ("\nPLD Part  0x");
-	bc = in8 (PLD_PART_REG);
-	write_hex (bc);
-	serial_puts ("\nPLD Vers  0x");
-	bc = in8 (PLD_VERS_REG);
-	write_hex (bc);
-	serial_puts ("\nBoard Rev 0x");
-	bc = in8 (PLD_BOARD_CFG_REG);
-	write_hex (bc);
-	serial_puts ("\n");
-#endif
-	/* check board */
-	bc = in8 (PLD_PART_REG);
-#if defined(CONFIG_TARGET_MIP405T)
-	if((bc & 0x80)==0)
-		SDRAM_err ("U-Boot configured for a MIP405T not for a MIP405!!!\n");
-#else
-	if((bc & 0x80)==0x80)
-		SDRAM_err ("U-Boot configured for a MIP405 not for a MIP405T!!!\n");
-#endif
-	/* set-up the chipselect machine */
-	mtdcr (EBC0_CFGADDR, PB0CR);		/* get cs0 config reg */
-	tmp = mfdcr (EBC0_CFGDATA);
-	if ((tmp & 0x00002000) == 0) {
-		/* MPS Boot, set up the flash */
-		mtdcr (EBC0_CFGADDR, PB1AP);
-		mtdcr (EBC0_CFGDATA, FLASH_AP);
-		mtdcr (EBC0_CFGADDR, PB1CR);
-		mtdcr (EBC0_CFGDATA, FLASH_CR);
-	} else {
-		/* Flash boot, set up the MPS */
-		mtdcr (EBC0_CFGADDR, PB1AP);
-		mtdcr (EBC0_CFGDATA, MPS_AP);
-		mtdcr (EBC0_CFGADDR, PB1CR);
-		mtdcr (EBC0_CFGDATA, MPS_CR);
-	}
-	/* set up UART0 (CS2) and UART1 (CS3) */
-	mtdcr (EBC0_CFGADDR, PB2AP);
-	mtdcr (EBC0_CFGDATA, UART0_AP);
-	mtdcr (EBC0_CFGADDR, PB2CR);
-	mtdcr (EBC0_CFGDATA, UART0_CR);
-	mtdcr (EBC0_CFGADDR, PB3AP);
-	mtdcr (EBC0_CFGDATA, UART1_AP);
-	mtdcr (EBC0_CFGADDR, PB3CR);
-	mtdcr (EBC0_CFGDATA, UART1_CR);
-	bc = in8 (PLD_BOARD_CFG_REG);
-#ifdef SDRAM_DEBUG
-	serial_puts ("\nstart SDRAM Setup\n");
-	serial_puts ("\nBoard Rev: ");
-	write_hex (bc);
-	serial_puts ("\n");
-#endif
-	i = 0;
-	baseaddr = CONFIG_SYS_SDRAM_BASE;
-	while (sdram_table[i].sz != 0xff) {
-		if (sdram_table[i].boardtype == bc)
-			break;
-		i++;
-	}
-	if (sdram_table[i].boardtype != bc)
-		SDRAM_err ("No SDRAM table found for this board!!!\n");
-#ifdef SDRAM_DEBUG
-	serial_puts (" found table ");
-	write_hex (i);
-	serial_puts (" \n");
-#endif
-	/* since the ECC initialisation needs some time,
-	 * we show that we're alive
-	 */
-	if (sdram_table[i].ecc)
-		serial_puts ("\nInitializing SDRAM, Please stand by");
-	cal_val = sdram_table[i].cal - 1;	/* Cas Latency */
-	trp_clocks = sdram_table[i].trp;	/* 20ns / 7.5 ns datain[27] */
-	trcd_clocks = sdram_table[i].trcd;	/* 20ns /7.5 ns (datain[29]) */
-	tras_clocks = sdram_table[i].tras;	/* 44ns /7.5 ns  (datain[30]) */
-	/* ctp = ((trp + tras) - trp - trcd) => tras - trcd */
-	/* trc_clocks is sum of trp_clocks + tras_clocks */
-	trc_clocks = trp_clocks + tras_clocks;
-	/* get SDRAM timing register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
-	sdram_tim = mfdcr (SDRAM0_CFGDATA) & ~0x018FC01F;
-	/* insert CASL value */
-	sdram_tim |= ((unsigned long) (cal_val)) << 23;
-	/* insert PTA value */
-	sdram_tim |= ((unsigned long) (trp_clocks - 1)) << 18;
-	/* insert CTP value */
-	sdram_tim |=
-			((unsigned long) (trc_clocks - trp_clocks -
-							  trcd_clocks)) << 16;
-	/* insert LDF (always 01) */
-	sdram_tim |= ((unsigned long) 0x01) << 14;
-	/* insert RFTA value */
-	sdram_tim |= ((unsigned long) (trc_clocks - 4)) << 2;
-	/* insert RCD value */
-	sdram_tim |= ((unsigned long) (trcd_clocks - 1)) << 0;
-
-	tmp = ((unsigned long) (sdram_table[i].am - 1) << 13);	/* AM = 3 */
-	/* insert SZ value; */
-	tmp |= ((unsigned long) sdram_table[i].sz << 17);
-	/* get SDRAM bank 0 register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
-	sdram_bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
-	sdram_bank |= (baseaddr | tmp | 0x01);
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("sdtr: ");
-	write_4hex (sdram_tim);
-	serial_puts ("\n");
-#endif
-
-	/* write SDRAM timing register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
-	mtdcr (SDRAM0_CFGDATA, sdram_tim);
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("mb0cf: ");
-	write_4hex (sdram_bank);
-	serial_puts ("\n");
-#endif
-
-	/* write SDRAM bank 0 register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
-	mtdcr (SDRAM0_CFGDATA, sdram_bank);
-
-	if (get_bus_freq (tmp) > 110000000) {	/* > 110MHz */
-		/* get SDRAM refresh interval register */
-		mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
-		tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000;
-		tmp |= 0x07F00000;
-	} else {
-		/* get SDRAM refresh interval register */
-		mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
-		tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000;
-		tmp |= 0x05F00000;
-	}
-	/* write SDRAM refresh interval register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
-	mtdcr (SDRAM0_CFGDATA, tmp);
-	/* enable ECC if used */
-#if defined(ENABLE_ECC) && !defined(CONFIG_BOOT_PCI)
-	if (sdram_table[i].ecc) {
-		/* disable checking for all banks */
-		unsigned long	*p;
-#ifdef SDRAM_DEBUG
-		serial_puts ("disable ECC.. ");
-#endif
-		mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
-		tmp = mfdcr (SDRAM0_CFGDATA);
-		tmp &= 0xff0fffff;		/* disable all banks */
-		mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
-		/* set up SDRAM Controller with ECC enabled */
-#ifdef SDRAM_DEBUG
-		serial_puts ("setup SDRAM Controller.. ");
-#endif
-		mtdcr (SDRAM0_CFGDATA, tmp);
-		mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
-		tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x90800000;
-		mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
-		mtdcr (SDRAM0_CFGDATA, tmp);
-		udelay (600);
-#ifdef SDRAM_DEBUG
-		serial_puts ("fill the memory..\n");
-#endif
-		serial_puts (".");
-		/* now, fill all the memory */
-		tmp = ((4 * MEGA_BYTE) << sdram_table[i].sz);
-		p = (unsigned long) 0;
-		while ((unsigned long) p < tmp) {
-			*p++ = 0L;
-			if (!((unsigned long) p % 0x00800000))	/* every 8MByte */
-				serial_puts (".");
-		}
-		/* enable bank 0 */
-		serial_puts (".");
-#ifdef SDRAM_DEBUG
-		serial_puts ("enable ECC\n");
-#endif
-		udelay (400);
-		mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
-		tmp = mfdcr (SDRAM0_CFGDATA);
-		tmp |= 0x00800000;		/* enable bank 0 */
-		mtdcr (SDRAM0_CFGDATA, tmp);
-		udelay (400);
-	} else
-#endif
-	{
-		/* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */
-		mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
-		tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x80C00000;
-		mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
-		mtdcr (SDRAM0_CFGDATA, tmp);
-		udelay (400);
-	}
-	serial_puts ("\n");
-	return (0);
-}
-
-int board_early_init_f (void)
-{
-	init_sdram ();
-
-   /*-------------------------------------------------------------------------+
-   | Interrupt controller setup for the PIP405 board.
-   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
-   |       IRQ 16    405GP internally generated; active low; level sensitive
-   |       IRQ 17-24 RESERVED
-   |       IRQ 25 (EXT IRQ 0) SouthBridge; active low; level sensitive
-   |       IRQ 26 (EXT IRQ 1) NMI: active low; level sensitive
-   |       IRQ 27 (EXT IRQ 2) SMI: active Low; level sensitive
-   |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
-   |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-   |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
-   |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
-   | Note for MIP405 board:
-   |       An interrupt taken for the SouthBridge (IRQ 25) indicates that
-   |       the Interrupt Controller in the South Bridge has caused the
-   |       interrupt. The IC must be read to determine which device
-   |       caused the interrupt.
-   |
-   +-------------------------------------------------------------------------*/
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr (UIC0CR, 0x00000000);	/* set all to be non-critical (for now) */
-	mtdcr (UIC0PR, 0xFFFFFF80);	/* set int polarities */
-	mtdcr (UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr (UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	int mode;
-
-	/*
-	 * since we are relocated, we can finally enable i-cache
-	 * and set up the flash CS correctly
-	 */
-	icache_enable();
-	setup_cs_reloc();
-	/* get and display boot mode */
-	mode = get_boot_mode();
-	if (mode & BOOT_PCI)
-		printf("PCI Boot %s Map\n", (mode & BOOT_MPS) ?
-			"MPS" : "Flash");
-	else
-		printf("%s Boot\n", (mode & BOOT_MPS) ?
-			"MPS" : "Flash");
-
-	return 0;
-}
-
-/*
- * Get some PLD Registers
- */
-
-unsigned short get_pld_parvers (void)
-{
-	unsigned short result;
-	unsigned char rc;
-
-	rc = in8 (PLD_PART_REG);
-	result = (unsigned short) rc << 8;
-	rc = in8 (PLD_VERS_REG);
-	result |= rc;
-	return result;
-}
-
-
-void user_led0 (unsigned char on)
-{
-	if (on)
-		out8 (PLD_COM_MODE_REG, (in8 (PLD_COM_MODE_REG) | 0x4));
-	else
-		out8 (PLD_COM_MODE_REG, (in8 (PLD_COM_MODE_REG) & 0xfb));
-}
-
-
-void ide_set_reset (int idereset)
-{
-	/* if reset = 1 IDE reset will be asserted */
-	if (idereset)
-		out8 (PLD_COM_MODE_REG, (in8 (PLD_COM_MODE_REG) | 0x1));
-	else {
-		udelay (10000);
-		out8 (PLD_COM_MODE_REG, (in8 (PLD_COM_MODE_REG) & 0xfe));
-	}
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
-{
-#if !defined(CONFIG_TARGET_MIP405T)
-	unsigned char bc,rc,tmp;
-	int i;
-
-	bc = in8 (PLD_BOARD_CFG_REG);
-	tmp = ~bc;
-	tmp &= 0xf;
-	rc = 0;
-	for (i = 0; i < 4; i++) {
-		rc <<= 1;
-		rc += (tmp & 0x1);
-		tmp >>= 1;
-	}
-	rc++;
-	if((  (((bc>>4) & 0xf)==0x2) /* Rev C PCB or */
-	   || (((bc>>4) & 0xf)==0x1)) /* Rev B PCB with */
-		&& (rc==0x1))     /* Population Option 1 is a -3 */
-		rc=3;
-	*pcbrev=(bc >> 4) & 0xf;
-	*var=rc;
-#else
-	unsigned char bc;
-	bc = in8 (PLD_BOARD_CFG_REG);
-	*pcbrev=(bc >> 4) & 0xf;
-	*var=16-(bc & 0xf);
-#endif
-}
-
-/*
- * Check Board Identity:
- */
-/* serial String: "MIP405_1000" OR "MIP405T_1000" */
-#if !defined(CONFIG_TARGET_MIP405T)
-#define BOARD_NAME	"MIP405"
-#else
-#define BOARD_NAME	"MIP405T"
-#endif
-
-int checkboard (void)
-{
-	char s[50];
-	unsigned char bc, var;
-	int i;
-	backup_t *b = (backup_t *) s;
-
-	puts ("Board: ");
-	get_pcbrev_var(&bc,&var);
-	i = getenv_f("serial#", (char *)s, 32);
-	if ((i == 0) || strncmp ((char *)s, BOARD_NAME,sizeof(BOARD_NAME))) {
-		get_backup_values (b);
-		if (strncmp (b->signature, "MPL\0", 4) != 0) {
-			puts ("### No HW ID - assuming " BOARD_NAME);
-			printf ("-%d Rev %c", var, 'A' + bc);
-		} else {
-			b->serial_name[sizeof(BOARD_NAME)-1] = 0;
-			printf ("%s-%d Rev %c SN: %s", b->serial_name, var,
-					'A' + bc, &b->serial_name[sizeof(BOARD_NAME)]);
-		}
-	} else {
-		s[sizeof(BOARD_NAME)-1] = 0;
-		printf ("%s-%d Rev %c SN: %s", s, var,'A' + bc,
-				&s[sizeof(BOARD_NAME)]);
-	}
-	bc = in8 (PLD_EXT_CONF_REG);
-	printf (" Boot Config: 0x%x\n", bc);
-	return (0);
-}
-
-
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-/*
-  dram_init() reads EEPROM via I2c. EEPROM contains all of
-  the necessary info for SDRAM controller configuration
-*/
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-static int test_dram (unsigned long ramsize);
-
-int dram_init(void)
-{
-
-	unsigned long bank_reg[4], tmp, bank_size;
-	int i;
-	unsigned long TotalSize;
-
-	/* since the DRAM controller is allready set up, calculate the size with the
-	   bank registers    */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
-	bank_reg[0] = mfdcr (SDRAM0_CFGDATA);
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
-	bank_reg[1] = mfdcr (SDRAM0_CFGDATA);
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
-	bank_reg[2] = mfdcr (SDRAM0_CFGDATA);
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
-	bank_reg[3] = mfdcr (SDRAM0_CFGDATA);
-	TotalSize = 0;
-	for (i = 0; i < 4; i++) {
-		if ((bank_reg[i] & 0x1) == 0x1) {
-			tmp = (bank_reg[i] >> 17) & 0x7;
-			bank_size = 4 << tmp;
-			TotalSize += bank_size;
-		}
-	}
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
-	tmp = mfdcr (SDRAM0_CFGDATA);
-
-	if (!tmp)
-		printf ("No ");
-	printf ("ECC ");
-
-	test_dram (TotalSize * MEGA_BYTE);
-	gd->ram_size = TotalSize * MEGA_BYTE;
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-
-static int test_dram (unsigned long ramsize)
-{
-#ifdef SDRAM_DEBUG
-	mem_test (0L, ramsize, 1);
-#endif
-	/* not yet implemented */
-	return (1);
-}
-
-/* used to check if the time in RTC is valid */
-static unsigned long start;
-static struct rtc_time tm;
-
-int misc_init_r (void)
-{
-	/* adjust flash start and size as well as the offset */
-	gd->bd->bi_flashstart=0-flash_info[0].size;
-	gd->bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN;
-	gd->bd->bi_flashoffset=0;
-
-	/* check, if RTC is running */
-	rtc_get (&tm);
-	start=get_timer(0);
-	/* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
-	if (mfdcr(CPC0_PSR) & PSR_ROM_LOC)
-	       mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80));
-
-	return (0);
-}
-
-
-void print_mip405_rev (void)
-{
-	unsigned char part, vers, pcbrev, var;
-
-	get_pcbrev_var(&pcbrev,&var);
-	part = in8 (PLD_PART_REG);
-	vers = in8 (PLD_VERS_REG);
-	printf ("Rev:   " BOARD_NAME "-%d Rev %c PLD %d Vers %d\n",
-			var, pcbrev + 'A', part & 0x7F, vers);
-}
-
-
-extern int mk_date (char *, struct rtc_time *);
-
-int last_stage_init (void)
-{
-	unsigned long stop;
-	struct rtc_time newtm;
-	char *s;
-
-	/* write correct LED configuration */
-	if (miiphy_write("ppc_4xx_eth0", 0x1, 0x14, 0x2402) != 0) {
-		printf ("Error writing to the PHY\n");
-	}
-	/* since LED/CFG2 is not connected on the -2,
-	 * write to correct capability information */
-	if (miiphy_write("ppc_4xx_eth0", 0x1, 0x4, 0x01E1) != 0) {
-		printf ("Error writing to the PHY\n");
-	}
-	print_mip405_rev ();
-	stdio_print_current_devices ();
-	check_env ();
-	/* check if RTC time is valid */
-	stop=get_timer(start);
-	while(stop<1200) {   /* we wait 1.2 sec to check if the RTC is running */
-		udelay(1000);
-		stop=get_timer(start);
-	}
-	rtc_get (&newtm);
-	if(tm.tm_sec==newtm.tm_sec) {
-		s=getenv("defaultdate");
-		if(!s)
-			mk_date ("010112001970", &newtm);
-		else
-			if(mk_date (s, &newtm)!=0) {
-				printf("RTC: Bad date format in defaultdate\n");
-				return 0;
-			}
-		rtc_reset ();
-		rtc_set(&newtm);
-	}
-	return 0;
-}
-
-/***************************************************************************
- * some helping routines
- */
-
-int overwrite_console (void)
-{
-	/* return true if console should be overwritten */
-	return ((in8(PLD_EXT_CONF_REG) & 0x1) == 0);
-}
-
-
-/************************************************************************
-* Print MIP405 Info
-************************************************************************/
-void print_mip405_info (void)
-{
-	unsigned char part, vers, cfg, irq_reg, com_mode, ext;
-
-	part = in8 (PLD_PART_REG);
-	vers = in8 (PLD_VERS_REG);
-	cfg = in8 (PLD_BOARD_CFG_REG);
-	irq_reg = in8 (PLD_IRQ_REG);
-	com_mode = in8 (PLD_COM_MODE_REG);
-	ext = in8 (PLD_EXT_CONF_REG);
-
-	printf ("PLD Part %d version %d\n", part & 0x7F, vers);
-	printf ("Board Revision %c\n", ((cfg >> 4) & 0xf) + 'A');
-	printf ("Population Options %d %d %d %d\n", (cfg) & 0x1,
-			(cfg >> 1) & 0x1, (cfg >> 2) & 0x1, (cfg >> 3) & 0x1);
-	printf ("User LED %s\n", (com_mode & 0x4) ? "on" : "off");
-	printf ("UART Clocks %d\n", (com_mode >> 4) & 0x3);
-#if !defined(CONFIG_TARGET_MIP405T)
-	printf ("User Config Switch %d %d %d %d %d %d %d %d\n",
-			(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
-			(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
-			(ext >> 6) & 0x1, (ext >> 7) & 0x1);
-	printf ("SER1 uses handshakes %s\n",
-			(ext & 0x80) ? "DTR/DSR" : "RTS/CTS");
-#else
-	printf ("User Config Switch %d %d %d %d %d %d %d %d\n",
-			(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
-			(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
-			(ext >> 6) & 0x1,(ext >> 7) & 0x1);
-#endif
-	printf ("IDE Reset %s\n", (ext & 0x01) ? "asserted" : "not asserted");
-	printf ("IRQs:\n");
-	printf ("  PIIX INTR: %s\n", (irq_reg & 0x80) ? "inactive" : "active");
-#if !defined(CONFIG_TARGET_MIP405T)
-	printf ("  UART0 IRQ: %s\n", (irq_reg & 0x40) ? "inactive" : "active");
-	printf ("  UART1 IRQ: %s\n", (irq_reg & 0x20) ? "inactive" : "active");
-#endif
-	printf ("  PIIX SMI:  %s\n", (irq_reg & 0x10) ? "inactive" : "active");
-	printf ("  PIIX INIT: %s\n", (irq_reg & 0x8) ? "inactive" : "active");
-	printf ("  PIIX NMI:  %s\n", (irq_reg & 0x4) ? "inactive" : "active");
-}
diff --git a/board/mpl/mip405/mip405.h b/board/mpl/mip405/mip405.h
deleted file mode 100644
index b1f69aa..0000000
--- a/board/mpl/mip405/mip405.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
- /****************************************************************************
- * Global routines used for MIP405
- *****************************************************************************/
-#ifndef __ASSEMBLY__
-/*int switch_cs(unsigned char boot);*/
-
-extern int  mem_test(unsigned long start, unsigned long ramsize,int mode);
-
-void user_led0(unsigned char on);
-
-
-#endif
-/* timings */
-/* PLD (CS7) */
-#define PLD_BME	0	/* Burst disable */
-#define PLD_TWE	5	/* 5 * 30ns 120ns Waitstates (access=TWT+1+TH) */
-#define PLD_CSN	1	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define PLD_OEN	1	/* Cycles from CS low to OE low   */
-#define PLD_WBN	1	/* Cycles from CS low to WE low   */
-#define PLD_WBF	1	/* Cycles from WE high to CS high */
-#define PLD_TH	2	/* Number of hold cycles after transfer */
-#define PLD_RE	0	/* Ready disabled */
-#define PLD_SOR	1	/* Sample on Ready disabled */
-#define PLD_BEM	0	/* Byte Write only active on Write cycles */
-#define PLD_PEN	0	/* Parity disable */
-#define PLD_AP	((PLD_BME << 31) + (PLD_TWE << 23) + (PLD_CSN << 18) + (PLD_OEN << 16) + (PLD_WBN << 14) + \
-					(PLD_WBF << 12) + (PLD_TH << 9) + (PLD_RE << 8) + (PLD_SOR << 7) + (PLD_BEM << 6) + (PLD_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define PLD_BS	0	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define PLD_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define PLD_BW	0	/* 16Bit */
-#define PLD_CR	((PER_PLD_ADDR & 0xfff00000) + (PLD_BS << 17) + (PLD_BU << 15) + (PLD_BW << 13))
-
-
-/* timings */
-
-#define PER_BOARD_ADDR (PER_UART1_ADDR+(1024*1024))
-/* Dummy CS to get the board revision */
-#define BOARD_BME	0	/* Burst disable */
-#define BOARD_TWE	255	/* 255 * 30ns 120ns Waitstates (access=TWT+1+TH) */
-#define BOARD_CSN	1	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define BOARD_OEN	1	/* Cycles from CS low to OE low   */
-#define BOARD_WBN	1	/* Cycles from CS low to WE low   */
-#define BOARD_WBF	1	/* Cycles from WE high to CS high */
-#define BOARD_TH	2	/* Number of hold cycles after transfer */
-#define BOARD_RE	0	/* Ready disabled */
-#define BOARD_SOR	1	/* Sample on Ready disabled */
-#define BOARD_BEM	0	/* Byte Write only active on Write cycles */
-#define BOARD_PEN	0	/* Parity disable */
-#define BOARD_AP	((BOARD_BME << 31) + (BOARD_TWE << 23) + (BOARD_CSN << 18) + (BOARD_OEN << 16) + (BOARD_WBN << 14) + \
-					(BOARD_WBF << 12) + (BOARD_TH << 9) + (BOARD_RE << 8) + (BOARD_SOR << 7) + (BOARD_BEM << 6) + (BOARD_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define BOARD_BS	0	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define BOARD_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define BOARD_BW	0	/* 16Bit */
-#define BOARD_CR	((PER_BOARD_ADDR & 0xfff00000) + (BOARD_BS << 17) + (BOARD_BU << 15) + (BOARD_BW << 13))
-
-
-/* UART0 CS2 */
-#define UART0_BME	0	/* Burst disable */
-#define UART0_TWE	7	/* 7 * 30ns 210ns Waitstates (access=TWT+1+TH) */
-#define UART0_CSN	1	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define UART0_OEN	1	/* Cycles from CS low to OE low   */
-#define UART0_WBN	1	/* Cycles from CS low to WE low   */
-#define UART0_WBF	1	/* Cycles from WE high to CS high */
-#define UART0_TH	2	/* Number of hold cycles after transfer */
-#define UART0_RE	0	/* Ready disabled */
-#define UART0_SOR	1	/* Sample on Ready disabled */
-#define UART0_BEM	0	/* Byte Write only active on Write cycles */
-#define UART0_PEN	0	/* Parity disable */
-#define UART0_AP	((UART0_BME << 31) + (UART0_TWE << 23) + (UART0_CSN << 18) + (UART0_OEN << 16) + (UART0_WBN << 14) + \
-					(UART0_WBF << 12) + (UART0_TH << 9) + (UART0_RE << 8) + (UART0_SOR << 7) + (UART0_BEM << 6) + (UART0_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define UART0_BS	0	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define UART0_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define UART0_BW	0	/* 8Bit */
-#define UART0_CR	((PER_UART0_ADDR & 0xfff00000) + (UART0_BS << 17) + (UART0_BU << 15) + (UART0_BW << 13))
-
-/* UART1 CS3 */
-#define UART1_AP UART0_AP /* same timing as UART0 */
-#define UART1_CR	((PER_UART1_ADDR & 0xfff00000) + (UART0_BS << 17) + (UART0_BU << 15) + (UART0_BW << 13))
-
-
-/* Flash CS0 or CS 1 */
-/* 0x7F8FFE80 slowest timing at all... */
-#define FLASH_BME_B	1	/* Burst enable */
-#define FLASH_FWT_B	0x6	/* 6 * 30ns 210ns First Wait Access */
-#define FLASH_BWT_B	0x6	/* 6 * 30ns 210ns Burst Wait Access */
-#define FLASH_BME	0	/* Burst disable */
-#define FLASH_TWE	0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
-#define FLASH_CSN	0	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define FLASH_OEN	1	/* Cycles from CS low to OE low   */
-#define FLASH_WBN	1	/* Cycles from CS low to WE low   */
-#define FLASH_WBF	1	/* Cycles from WE high to CS high */
-#define FLASH_TH	2	/* Number of hold cycles after transfer */
-#define FLASH_RE	0	/* Ready disabled */
-#define FLASH_SOR	1	/* Sample on Ready disabled */
-#define FLASH_BEM	0	/* Byte Write only active on Write cycles */
-#define FLASH_PEN	0	/* Parity disable */
-/* Access Parameter Register for non Boot */
-#define FLASH_AP	((FLASH_BME << 31) + (FLASH_TWE << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
-					(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
-/* Access Parameter Register for Boot */
-#define FLASH_AP_B	((FLASH_BME_B << 31) + (FLASH_FWT_B << 26) + (FLASH_BWT_B << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
-					(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define FLASH_BS	FLASH_SIZE_PRELIM	/* 4 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define FLASH_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define FLASH_BW	1	/* 16Bit */
-/* CR register for Boot */
-#define FLASH_CR_B	((FLASH_BASE_PRELIM & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
-/* CR register for non Boot */
-#define FLASH_CR	((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
-
-/* MPS CS1 or CS0 */
-/* Boot CS: */
-#define MPS_BME_B	1	/* Burst enable */
-#define MPS_FWT_B	0x6/* 6 * 30ns 210ns First Wait Access */
-#define MPS_BWT_B	0x6	/* 6 * 30ns 210ns Burst Wait Access */
-#define MPS_BME		0	/* Burst disable */
-#define MPS_TWE		0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
-#define MPS_CSN		0	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define MPS_OEN		1	/* Cycles from CS low to OE low   */
-#define MPS_WBN		1	/* Cycles from CS low to WE low   */
-#define MPS_WBF		1	/* Cycles from WE high to CS high */
-#define MPS_TH		2	/* Number of hold cycles after transfer */
-#define MPS_RE		0	/* Ready disabled */
-#define MPS_SOR		1	/* Sample on Ready disabled */
-#define MPS_BEM		0	/* Byte Write only active on Write cycles */
-#define MPS_PEN		0	/* Parity disable */
-/* Access Parameter Register for non Boot */
-#define MPS_AP		((MPS_BME << 31) + (MPS_TWE << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
-					(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
-/* Access Parameter Register for Boot */
-#define MPS_AP_B		((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
-					(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define MPS_BS		2	/* 4 MByte */
-#define MPS_BS_B		FLASH_SIZE_PRELIM	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define MPS_BU		3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define MPS_BW		0	/* 8Bit */
-/* CR register for Boot */
-#define MPS_CR_B	((FLASH_BASE_PRELIM & 0xfff00000) + (MPS_BS_B << 17) + (MPS_BU << 15) + (MPS_BW << 13))
-/* CR register for non Boot */
-#define MPS_CR		((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))
diff --git a/board/mpl/pip405/Kconfig b/board/mpl/pip405/Kconfig
deleted file mode 100644
index e7ae6af..0000000
--- a/board/mpl/pip405/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_PIP405
-
-config SYS_BOARD
-	default "pip405"
-
-config SYS_VENDOR
-	default "mpl"
-
-config SYS_CONFIG_NAME
-	default "PIP405"
-
-config ISO_STRING
-	string
-	default "MEV-10066-001"
-endif
diff --git a/board/mpl/pip405/MAINTAINERS b/board/mpl/pip405/MAINTAINERS
deleted file mode 100644
index 9b3b974..0000000
--- a/board/mpl/pip405/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PIP405 BOARD
-M:	Denis Peter <d.peter@mpl.ch>
-S:	Maintained
-F:	board/mpl/pip405/
-F:	include/configs/PIP405.h
-F:	configs/PIP405_defconfig
diff --git a/board/mpl/pip405/Makefile b/board/mpl/pip405/Makefile
deleted file mode 100644
index 0a3d059..0000000
--- a/board/mpl/pip405/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= pip405.o cmd_pip405.o \
-		../common/pci.o \
-		../common/isa.o \
-		../common/kbd.o \
-		../common/usb_uhci.o \
-		../common/common_util.o
-obj-y	+= init.o
diff --git a/board/mpl/pip405/README b/board/mpl/pip405/README
deleted file mode 100644
index f039817..0000000
--- a/board/mpl/pip405/README
+++ /dev/null
@@ -1,371 +0,0 @@
-U-Boot Changes due to PIP405 Port:
-===================================
-
-Changed files:
-==============
-- MAKEALL			added PIP405
-- makefile			added PIP405
-- common/Makefile		added Floppy disk and SCSI support
-- common/board.c		added PIP405, SCSI support, get_PCI_freq()
-- common/bootm.c		added IH_OS_U_BOOT, IH_TYPE_FIRMWARE
-- common/cmd_i2c.c		added "defined(CONFIG_PIP405)"
-- common/cmd_ide.c		changed div. functions to work with block device
-				description
-				added ATAPI support
-- common/command.c		added SCSI and Floppy support
-- common/console.c		replaced // with /* comments
-				added console settings from environment
-- common/devices.c		added ISA keyboard init
-- common/main.c			corrected the read of bootdelay
-- arch/powerpc/cpu/ppc4xx/405gp_pci.c	excluded file from PIP405
-- arch/powerpc/cpu/ppc4xx/i2c.c		added 16bit read write I2C support
-				added page write
-- arch/powerpc/cpu/ppc4xx/speed.c		added get_PCI_freq
-- arch/powerpc/cpu/ppc4xx/start.S		added CONFIG_IDENT_STRING
-- disk/Makefile			added part_iso for CD support
-- disk/part.c			changed to work with block device description
-				added ISO CD support
-				added dev_print (was ide_print in cmd_ide.c)
-- disk/part_dos.c		changed to work with block device description
-- disk/part_mac.c		changed to work with block device description
-- include/ata.h			added ATAPI commands
-- include/cmd_bsp.h		added PIP405 commands definitions
-- include/cmd_condefs.h		added Floppy and SCSI support
-- include/cmd_disk.h		changed to work with block device description
-- include/config_LANTEC.h	excluded CONFIG_CMD_FDC and CONFIG_SCSI
-- include/config_hymod.h	excluded CONFIG_CMD_FDC and CONFIG_SCSI
-- include/flash.h		added INTEL_ID_28F320C3T  0x88C488C4
-- include/i2c.h			added "defined(CONFIG_PIP405)"
-- include/image.h		added IH_OS_U_BOOT, IH_TYPE_FIRMWARE
-- include/u-boot.h		moved partitions functions definitions to part.h
-				added "defined(CONFIG_PIP405)"
-				added get_PCI_freq() definition
-- rtc/Makefile			added MC146818 RTC support
-- tools/mkimage.c		added IH_OS_U_BOOT, IH_TYPE_FIRMWARE
-
-Added files:
-============
-- board/pip405			directory for PIP405
-- board/pip405/cmd_pip405.c	board specific commands
-- board/pip405/config.mk	config make
-- board/pip405/flash.c		flash support
-- board/pip405/init.s		start-up
-- board/pip405/kbd.c		keyboard support
-- board/pip405/kbd.h		keyboard support
-- board/pip405/Makefile		Makefile
-- board/pip405/pci_piix4.h	southbridge definitions
-- board/pip405/pci_pip405.c	PCI support for PIP405
-- board/pip405/pci_pip405.h	PCI support for PIP405
-- board/pip405/pip405.c		PIP405 board init
-- board/pip405/pip405.h		PIP405 board init
-- board/pip405/pip405_isa.c	ISA support
-- board/pip405/pip405_isa.h	ISA support
-- board/pip405/u-boot.lds	Linker description
-- board/pip405/u-boot.lds.debugLinker description debug
-- board/pip405/sym53c8xx.c	SYM53C810A support
-- board/pip405/sym53c8xx_defs.h SYM53C810A definitions
-- board/pip405/vga_table.h	definitions of tables for VGA
-- board/pip405/video.c		CT69000 support
-- board/pip405/video.h		CT69000 support
-- common/cmd_fdc.c		Floppy disk support
-- common/cmd_scsi.c		SCSI support
-- disk/part_iso.c		ISO CD ROM support
-- disk/part_iso.h		ISO CD ROM support
-- include/cmd_fdc.h		command forFloppy disk support
-- include/cmd_scsi.h		command for SCSI support
-- include/part.h		partitions functions definitions
-				(was part of u-boot.h)
-- include/scsi.h		SCSI support
-- rtc/mc146818.c		MC146818 RTC support
-
-
-New Config Switches:
-====================
-For detailed description, refer to the corresponding paragraph in the
-section "Changes".
-
-New Commands:
--------------
-CONFIG_SCSI	SCSI Support
-CONFIG_CMF_FDC	Floppy disk support
-
-IDE additions:
---------------
-CONFIG_IDE_RESET_ROUTINE	defines that instead of a reset Pin,
-				the routine ide_set_reset(int idereset) is used.
-ATAPI support (experimental)
-----------------------------
-CONFIG_ATAPI	enables ATAPI Support
-
-SCSI support (experimental) only SYM53C8xx supported
-----------------------------------------------------
-CONFIG_SCSI_SYM53C8XX		type of SCSI controller
-CONFIG_SYS_SCSI_MAX_LUN	8	number of supported LUNs
-CONFIG_SYS_SCSI_MAX_SCSI_ID	7	maximum SCSI ID (0..6)
-CONFIG_SYS_SCSI_MAX_DEVICE	CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN
-				maximum of Target devices (multiple LUN support
-				for boot)
-
-ISO (CD-Boot) partition support (Experimental)
-----------------------------------------------
-CONFIG_ISO_PARTITION		CD-boot support
-
-RTC
-----
-CONFIG_RTC_MC146818		MC146818 RTC support
-
-Video:
-------
-CONFIG_VIDEO_CT69000		Enable Chips & Technologies 69000 Video chip
-				CONFIG_VIDEO must be defined also
-
-External peripheral base address:
----------------------------------
-CONFIG_SYS_ISA_IO_BASE_ADDRESS		address of all ISA-bus related parts
-				_must_ be defined for ISA-bus parts
-
-Identify:
----------
-CONFIG_IDENT_STRING		added to the U_BOOT_VERSION String
-
-Environment / Console:
-----------------------
-
-CONFIG_SYS_CONSOLE_IS_IN_ENV		if defined, stdin, stdout and stderr used from
-				the values stored in the evironment.
-
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	if defined, console_overwrite() decides if the
-				values stored in the environment or the standard
-				serial in/out put should be assigned to the console.
-
-CONFIG_SYS_CONSOLE_ENV_OVERWRITE	if defined, the start-up console switching
-				are stored in the environment.
-
-PIP405 specific:
-----------------
-CONFIG_PORT_ADDR		address used to read boot configuration
-MULTI_PURPOSE_SOCKET_ADDR	address of the multi purpose socked
-SDRAM_EEPROM_WRITE_ADDRESS	addresses of the serial presence detect
-SDRAM_EEPROM_READ_ADDRESS	EEPROM on the SDRAM module.
-
-
-Changes:
-========
-
-Added Devices:
-==============
-
-Floppy support:
----------------
-Support of a standard floppy disk controller at address CONFIG_SYS_ISA_IO_BASE_ADDRESS
-+ 0x3F0. Enabled with define CONFIG_CMD_FDC. Reads a unformated floppy disk
-with a image header (see: mkimage). No interrupts and no DMA are used for this.
-Added files:
-- common/cmd_fdc.c
-- include/cmd_fdc.h
-
-SCSI support:
--------------
-Support for Symbios SYM53C810A chip. Implemented as follows:
-- without disconnect
-- only asynchrounous
-- multiple LUN support (caution, needs a lot of RAM. define CONFIG_SYS_SCSI_MAX_LUN 1 to
-  save RAM)
-- multiple SCSI ID support
-- no write support
-- analyses the MAC, DOS and ISO pratition similar to the IDE support
-- allows booting from SCSI devices similar to the IDE support.
-The device numbers are not assigned like they are within the IDE support. The first
-device found will get the number 0, the next 1 etc. If all SCSI IDs (0..6) and all
-LUNs (8) are enabled, 56 boot devices are possible. This uses a lot of RAM since the
-device descriptors are not yet dynamically allocated. 56 boot devices are overkill
-anyway. Please refer to the section "Todo" chapter "block device support enhancement".
-The SYM53C810A uses 1 Interrupt and must be able of mastering the PCI bus.
-Added files:
-- common/cmd_scsi.c
-- common/board.c
-- include/cmd_scsi.h
-- include/scsi.h
-- board/pip405/sym53c8xx.c
-- board/pip405/sym53c8xx_defs.h
-
-ATAPI support (IDE changes):
-----------------------------
-Added ATAPI support (with CONFIG_ATAPI) in the file cmd_ide.c.
-To support a hardreset, when the IDE reset pin is not connected to the
-CONFIG_SYS_PC_IDE_RESET pin, the switch CONFIG_IDE_RESET_ROUTINE has been added. When
-this switch is enabled the routine void ide_set_reset(int idereset) must be
-within the board specific files.
-Only read from ATAPI devices are supported.
-Found out that the function trim_trail cuts off the last character if the whole
-string is filled. Added function cpy_ident instead, which trims also leading
-spaces and copies the string in the buffer.
-Changed files:
-- common/cmd_ide.c
-- include/ata.h
-
-ISO partition support:
-----------------------
-Added CD boot support for El-Torito bootable ISO CDs. The bootfile image must contain
-the U-Boot image header. Since CDs do not have "partitions", the boot partition is 0.
-The bootcatalog feature has not been tested so far. CD Boot is supported for ATAPI
-("diskboot") and SCSI ("scsiboot") devices.
-Added files:
-- disk/iso_part.c
-- disk/iso_part.h
-
-Block device changes:
----------------------
-To allow the use of dos_part.c, mac_part.c and iso_part.c, the parameter
-blk_desc will be used when accessing the functions in these files. The block
-device descriptor (blk_desc) contains a pointer to the read routine of the
-device, which will be used to read blocks from the device.
-Renamed function ide_print to dev_print and moved it to the file disk/part.c to use
-it for IDE ATAPI and SCSI devices.
-Please refer to the section "Todo" chapter "block device support enhancement".
-Added files:
-- include/part.h
-changed files:
-- disk/dos_part.c
-- disk/dos_part.h
-- disk/mac_part.c
-- disk/mac_part.h
-- disk/part.c
-- common/cmd_ide.c
-- include/u-boot.h
-
-
-MC146818 RTC support:
----------------------
-Added support for MC146818 RTC with defining CONFIG_RTC_MC146818. The ISA bus IO
-base address must be defined with CONFIG_SYS_ISA_IO_BASE_ADDRESS.
-Added files:
-- rtc/mc146818.c
-
-Standard ISA bus Keyboard support:
-----------------------------------
-Added support for the standard PC kyeboard controller. For the PIP405 the superIO
-controller must be set up previously. The keyboard uses the standard ISA IRQ, so
-the ISA PIC must also be set up.
-Added files:
-- board/pip405/kbd.c
-- board/pip405/kbd.h
-- board/pip405/pip405_isa.c
-- board/pip405/pip405_isa.h
-
-Chips and Technologie 69000 VGA controller support:
----------------------------------------------------
-Added support for the CT69000 VGA controller.
-Added files:
-- board/pip405/video.c
-- board/pip405/video.h
-- board/pip405/vga_table.h
-
-
-Changed Items:
-==============
-
-Identify:
----------
-Added the config variable CONFIG_IDENT_STRING which will be added to the
-"U_BOOT_VERSION __TIME__ DATE___ " String, to allows to identify intermidiate
-and custom versions.
-Changed files:
-- arch/powerpc/cpu/ppc4xx/start.s
-
-Firmware Image:
----------------
-Added IH_OS_U_BOOT and IH_TYPE_FIRMWARE to the image definitions to allows the
-U-Boot update with prior CRC check.
-Changed files:
-- include/image.h
-- tools/mkimage.c
-- common/cmd_bootm.c
-
-Correct PCI Frequency for PPC405:
----------------------------------
-Added function (in arch/powerpc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
-The PCI Frequency will now be set correct in the board description in common/board.c.
-(was set to the busfreq before).
-Changed files:
-- arch/powerpc/cpu/ppc4xx/speed.c
-- common/board.c
-
-I2C Stuff:
-----------
-Added defined(CONFIG_PIP405) at several points in common/cmd_i2c.c.
-Added 16bit read/write support for I2C (PPC405), and page write to
-I2C EEPROM if defined CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE.
-Changed files:
-- arch/powerpc/cpu/ppc4xx/i2c.c
-- common/cmd_i2c.c
-
-Environment / Console:
-----------------------
-Although in README.console described, the U-Boot has not assinged the values
-found in the environment to the console. Corrected this behavior, but only if
-CONFIG_SYS_CONSOLE_IS_IN_ENV is defined.
-If CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE is defined, console_overwrite() decides if the
-values stored in the environment or the standard serial in/output should be
-assigned to the console. This is useful if the environment values are not correct.
-If CONFIG_SYS_CONSOLE_ENV_OVERWRITE is defined the devices assigned to the console at
-start-up time will be written to the environment. This means that if the
-environment values are overwritten by the overwrite_console() routine, they will be
-stored in the environment.
-Changed files:
-- common/console.c
-
-Correct bootdelay intepretation:
---------------------------------
-Changed bootdelay read from the environment from simple_strtoul (unsigned) to
-simple_strtol (signed), to be able to get a bootdelay of -1.
-Changed files:
-- common/main.c
-
-Todo:
-=====
-
-Block device support enhancement:
----------------------------------
-Consider to unify the block device handling. Instead of using diskboot for IDE,
-scsiboot for SCSI and fdcboot for floppy disks, it would make sense to use only
-one command ("devboot" ???) with a parameter of the desired device ("hda1", "sda1",
-"fd0" ???) to boot from. The other ide commands can be handled in the same way
-("dev hda read.." instead of "ide read.." or "dev sda read.." instead of
-"scsi read..."). Todo this, a common way of assign a block device to its name
-(first found ide device = hda, second found hdb etc., or hda is device 0 on bus 0,
-hdb is device 1 on bus 0 etc.) as well as the names (hdx for ide, sdx for scsi, fx for
-floppy ???) must be defined.
-Maybe there are better ideas to do this.
-
-Console assingment:
--------------------
-Consider to initialize and assign the console stdin, stdout and stderr as soon as
-possible to see the boot messages also on an other console than serial.
-
-
-Todo for PIP405:
-================
-
-LCD support for VGA:
---------------------
-Add LCD support for the CT69000
-
-Default environment:
---------------------
-Consider to write a default environment to the OTP part of the EEPROM and use it
-if the normal environment is not valid. Useful for serial# and ethaddr values.
-
-Watchdog:
----------
-Implement Watchdog.
-
-Files clean-up:
----------------
-Following files needs to be cleaned up:
-- cmd_pip405.c
-- flash.c
-- pci_pip405.c
-- pip405.c
-- pip405_isa.c
-Consider to split up the files in their functions.
diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c
deleted file mode 100644
index 43b182e..0000000
--- a/board/mpl/pip405/cmd_pip405.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * hacked for PIP405
- */
-
-#include <common.h>
-#include <command.h>
-#include "pip405.h"
-#include "../common/common_util.h"
-
-
-extern void print_pip405_info(void);
-extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-
-
-/* ------------------------------------------------------------------------- */
-
-int do_pip405(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-
-	ulong led_on,led_nr;
-
-	if (strcmp(argv[1], "info") == 0)
-	{
-		print_pip405_info();
-		return 0;
-	}
-	if (strcmp(argv[1], "led") == 0)
-	{
-		led_nr = (ulong)simple_strtoul(argv[2], NULL, 10);
-		led_on = (ulong)simple_strtoul(argv[3], NULL, 10);
-		if(!led_nr)
-			user_led0(led_on);
-		else
-			user_led1(led_on);
-		return 0;
-	}
-
-	return (do_mplcommon(cmdtp, flag, argc, argv));
-}
-U_BOOT_CMD(
-	pip405,	6,	1,	do_pip405,
-	"PIP405 specific Cmds",
-	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
-	"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"
-	"pip405 flash mps - updates U-Boot with image from MPS"
-);
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S
deleted file mode 100644
index 292393e..0000000
--- a/board/mpl/pip405/init.S
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0	IBM-pibs
- */
-/*-----------------------------------------------------------------------------
- * Function:     ext_bus_cntlr_init
- * Description:  Initializes the External Bus Controller for the external
- *		peripherals. IMPORTANT: For pass1 this code must run from
- *		cache since you can not reliably change a peripheral banks
- *		timing register (pbxap) while running code from that bank.
- *		For ex., since we are running from ROM on bank 0, we can NOT
- *		execute the code that modifies bank 0 timings from ROM, so
- *		we run it from cache.
- *	Bank 0 - Flash or Multi Purpose Socket
- *	Bank 1 - Multi Purpose Socket or Flash
- *	Bank 2 - not used
- *	Bank 3 - not used
- *	Bank 4 - not used
- *	Bank 5 - not used
- *	Bank 6 - used to switch on the 12V for the Multipurpose socket
- *	Bank 7 - Config Register
- *-----------------------------------------------------------------------------*/
-
-#include <configs/PIP405.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx.h>
-#include "pip405.h"
-
-  .globl ext_bus_cntlr_init
- ext_bus_cntlr_init:
-  mflr   r4                      /* save link register */
-  mfdcr  r3,CPC0_PSR                /* get strapping reg */
-  andi.  r0, r3, PSR_ROM_LOC     /* mask out irrelevant bits */
-  bnelr                          /* jump back if PCI boot */
-
-  bl      ..getAddr
-..getAddr:
-  mflr    r3                      /* get address of ..getAddr */
-  mtlr    r4                      /* restore link register */
-  addi    r4,0,14                 /* set ctr to 14; used to prefetch */
-  mtctr   r4                      /* 14 cache lines to fit this function */
-				   /* in cache (gives us 8x14=112 instrctns) */
-..ebcloop:
-  icbt    r0,r3                   /* prefetch cache line for addr in r3 */
-  addi    r3,r3,32								/* move to next cache line */
-  bdnz    ..ebcloop               /* continue for 14 cache lines */
-
-   /*-------------------------------------------------------------------
-    * Delay to ensure all accesses to ROM are complete before changing
-    * bank 0 timings.
-    *------------------------------------------------------------------- */
-	addis	r3,0,0x0
-  ori     r3,r3,0xA000
-  mtctr   r3
-..spinlp:
-  bdnz    ..spinlp                /* spin loop */
-
-	/*-----------------------------------------------------------------------
-	 * decide boot up mode
-	 *----------------------------------------------------------------------- */
-	addi		r4,0,PB0CR
-	mtdcr		EBC0_CFGADDR,r4
-	mfdcr		r4,EBC0_CFGDATA
-
-	andi.		r0, r4, 0x2000			/* mask out irrelevant bits */
-	beq		0f				/* jump if 8 bit bus width */
-
-	/* setup 16 bit things
-   *-----------------------------------------------------------------------
-   * Memory Bank 0 (16 Bit Flash) initialization
-   *---------------------------------------------------------------------- */
-
-	addi    r4,0,PB1AP
-	mtdcr   EBC0_CFGADDR,r4
-	addis   r4,0,(FLASH_AP_B)@h
-	ori     r4,r4,(FLASH_AP_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-
-	addi    r4,0,PB0CR
-	mtdcr   EBC0_CFGADDR,r4
-	/* BS=0x010(4MB),BU=0x3(R/W), */
-	addis   r4,0,(FLASH_CR_B)@h
-	ori     r4,r4,(FLASH_CR_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-	b				1f
-
-0:
-	/* 8Bit boot mode: */
-	/*-----------------------------------------------------------------------
-	* Memory Bank 0 Multi Purpose Socket initialization
-	*----------------------------------------------------------------------- */
-	/* 0x7F8FFE80 slowest boot */
-	addi    r4,0,PB1AP
-	mtdcr   EBC0_CFGADDR,r4
-	addis   r4,0,(MPS_AP_B)@h
-	ori     r4,r4,(MPS_AP_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-
-	addi    r4,0,PB0CR
-	mtdcr   EBC0_CFGADDR,r4
-	/* BS=0x010(4MB),BU=0x3(R/W), */
-	addis   r4,0,(MPS_CR_B)@h
-	ori     r4,r4,(MPS_CR_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-
-
-1:
-  /*-----------------------------------------------------------------------
-   * Memory Bank 2-3-4-5-6 (not used) initialization
-   *-----------------------------------------------------------------------*/
-  addi    r4,0,PB1CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB2CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB3CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB4CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB5CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB6CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB7CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-  nop				/* pass2 DCR errata #8 */
-  blr
-
-#if defined(CONFIG_BOOT_PCI)
-    .section .bootpg,"ax"
-    .globl _start_pci
-/*******************************************
- */
-
-_start_pci:
-  /* first handle errata #68 / PCI_18 */
-  iccci   r0, r0          /* invalidate I-cache */
-  lis     r31, 0
-  mticcr  r31             /* ICCR = 0 (all uncachable) */
-  isync
-
-  mfccr0  r28             /* set CCR0[24] = 1 */
-  ori     r28, r28, 0x0080
-  mtccr0  r28
-
-  /* setup PMM0MA (0xEF400004) and PMM0PCIHA (0xEF40000C) */
-  lis     r28, 0xEF40
-  addi    r28, r28, 0x0004
-  stw     r31, 0x0C(r28)  /* clear PMM0PCIHA */
-  lis     r29, 0xFFF8     /* open 512 kByte */
-  addi    r29, r29, 0x0001/* and enable this region */
-  stwbrx  r29, r0, r28    /* write PMM0MA */
-
-  lis     r28, 0xEEC0     /* address of PCIC0_CFGADDR */
-  addi    r29, r28, 4     /* add 4 to r29 -> PCIC0_CFGDATA */
-
-  lis     r31, 0x8000     /* set en bit bus 0 */
-  ori     r31, r31, 0x304C/* device 6 func 0 reg 4C (XBCS register) */
-  stwbrx  r31, r0, r28    /* write it */
-
-  lwbrx   r31, r0, r29    /* load XBCS register */
-  oris    r31, r31, 0x02C4/* clear BIOSCS WPE, set lower, extended and 1M extended BIOS enable */
-  stwbrx  r31, r0, r29    /* write back XBCS register */
-
-  nop
-  nop
-  b	_start		/* normal start */
-#endif
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
deleted file mode 100644
index 408518d..0000000
--- a/board/mpl/pip405/pip405.c
+++ /dev/null
@@ -1,958 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * TODO: clean-up
- */
-
-#include <common.h>
-#include "pip405.h"
-#include <asm/processor.h>
-#include <i2c.h>
-#include <stdio_dev.h>
-#include "../common/isa.h"
-#include "../common/common_util.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef SDRAM_DEBUG
-
-/* stdlib.h causes some compatibility problems; should fixe these! -- wd */
-#ifndef __ldiv_t_defined
-typedef struct {
-	long int quot;		/* Quotient */
-	long int rem;		/* Remainder    */
-} ldiv_t;
-extern ldiv_t ldiv (long int __numer, long int __denom);
-
-# define __ldiv_t_defined	1
-#endif
-
-
-typedef enum {
-	SDRAM_NO_ERR,
-	SDRAM_SPD_COMM_ERR,
-	SDRAM_SPD_CHKSUM_ERR,
-	SDRAM_UNSUPPORTED_ERR,
-	SDRAM_UNKNOWN_ERR
-} SDRAM_ERR;
-
-typedef struct {
-	const unsigned char mode;
-	const unsigned char row;
-	const unsigned char col;
-	const unsigned char bank;
-} SDRAM_SETUP;
-
-static const SDRAM_SETUP sdram_setup_table[] = {
-	{1, 11, 9, 2},
-	{1, 11, 10, 2},
-	{2, 12, 9, 4},
-	{2, 12, 10, 4},
-	{3, 13, 9, 4},
-	{3, 13, 10, 4},
-	{3, 13, 11, 4},
-	{4, 12, 8, 2},
-	{4, 12, 8, 4},
-	{5, 11, 8, 2},
-	{5, 11, 8, 4},
-	{6, 13, 8, 2},
-	{6, 13, 8, 4},
-	{7, 13, 9, 2},
-	{7, 13, 10, 2},
-	{0, 0, 0, 0}
-};
-
-static const unsigned char cal_indextable[] = {
-	9, 23, 25
-};
-
-
-/*
- * translate ns.ns/10 coding of SPD timing values
- * into 10 ps unit values
- */
-
-unsigned short NS10to10PS (unsigned char spd_byte, unsigned char spd_version)
-{
-	unsigned short ns, ns10;
-
-	/* isolate upper nibble */
-	ns = (spd_byte >> 4) & 0x0F;
-	/* isolate lower nibble */
-	ns10 = (spd_byte & 0x0F);
-
-	return (ns * 100 + ns10 * 10);
-}
-
-/*
- * translate ns.ns/4 coding of SPD timing values
- * into 10 ps unit values
- */
-
-unsigned short NS4to10PS (unsigned char spd_byte, unsigned char spd_version)
-{
-	unsigned short ns, ns4;
-
-	/* isolate upper 6 bits */
-	ns = (spd_byte >> 2) & 0x3F;
-	/* isloate lower 2 bits */
-	ns4 = (spd_byte & 0x03);
-
-	return (ns * 100 + ns4 * 25);
-}
-
-/*
- * translate ns coding of SPD timing values
- * into 10 ps unit values
- */
-
-unsigned short NSto10PS (unsigned char spd_byte)
-{
-	return (spd_byte * 100);
-}
-
-void SDRAM_err (const char *s)
-{
-#ifndef SDRAM_DEBUG
-	(void) get_clocks ();
-	gd->baudrate = 9600;
-	serial_init ();
-#endif
-	serial_puts ("\n");
-	serial_puts (s);
-	serial_puts ("\n enable SDRAM_DEBUG for more info\n");
-	for (;;);
-}
-
-
-#ifdef SDRAM_DEBUG
-
-void write_hex (unsigned char i)
-{
-	char cc;
-
-	cc = i >> 4;
-	cc &= 0xf;
-	if (cc > 9)
-		serial_putc (cc + 55);
-	else
-		serial_putc (cc + 48);
-	cc = i & 0xf;
-	if (cc > 9)
-		serial_putc (cc + 55);
-	else
-		serial_putc (cc + 48);
-}
-
-void write_4hex (unsigned long val)
-{
-	write_hex ((unsigned char) (val >> 24));
-	write_hex ((unsigned char) (val >> 16));
-	write_hex ((unsigned char) (val >> 8));
-	write_hex ((unsigned char) val);
-}
-
-#endif
-
-int board_early_init_f (void)
-{
-	unsigned char datain[128];
-	unsigned long sdram_size = 0;
-	SDRAM_SETUP *t = (SDRAM_SETUP *) sdram_setup_table;
-	unsigned long memclk;
-	unsigned long tmemclk = 0;
-	unsigned long tmp, bank, baseaddr, bank_size;
-	unsigned short i;
-	unsigned char rows, cols, banks, sdram_banks, density;
-	unsigned char supported_cal, trp_clocks, trcd_clocks, tras_clocks,
-		trc_clocks;
-	unsigned char cal_index, cal_val, spd_version, spd_chksum;
-	unsigned char buf[8];
-#ifdef SDRAM_DEBUG
-	unsigned char tctp_clocks;
-#endif
-
-	/* set up the config port */
-	mtdcr (EBC0_CFGADDR, PB7AP);
-	mtdcr (EBC0_CFGDATA, CONFIG_PORT_AP);
-	mtdcr (EBC0_CFGADDR, PB7CR);
-	mtdcr (EBC0_CFGDATA, CONFIG_PORT_CR);
-
-	memclk = get_bus_freq (tmemclk);
-	tmemclk = 1000000000 / (memclk / 100);	/* in 10 ps units */
-
-#ifdef SDRAM_DEBUG
-	(void) get_clocks ();
-	gd->baudrate = 9600;
-	serial_init ();
-	serial_puts ("\nstart SDRAM Setup\n");
-#endif
-
-	/* Read Serial Presence Detect Information */
-	i2c_set_bus_num(0);
-	for (i = 0; i < 128; i++)
-		datain[i] = 127;
-	i2c_read(SPD_EEPROM_ADDRESS,0,1,datain,128);
-#ifdef SDRAM_DEBUG
-	serial_puts ("\ni2c_read returns ");
-	write_hex (i);
-	serial_puts ("\n");
-#endif
-
-#ifdef SDRAM_DEBUG
-	for (i = 0; i < 128; i++) {
-		write_hex (datain[i]);
-		serial_puts (" ");
-		if (((i + 1) % 16) == 0)
-			serial_puts ("\n");
-	}
-	serial_puts ("\n");
-#endif
-	spd_chksum = 0;
-	for (i = 0; i < 63; i++) {
-		spd_chksum += datain[i];
-	}							/* endfor */
-	if (datain[63] != spd_chksum) {
-#ifdef SDRAM_DEBUG
-		serial_puts ("SPD chksum: 0x");
-		write_hex (datain[63]);
-		serial_puts (" != calc. chksum: 0x");
-		write_hex (spd_chksum);
-		serial_puts ("\n");
-#endif
-		SDRAM_err ("SPD checksum Error");
-	}
-	/* SPD seems to be ok, use it */
-
-	/* get SPD version */
-	spd_version = datain[62];
-
-	/* do some sanity checks on the kind of RAM */
-	if ((datain[0] < 0x80) ||	/* less than 128 valid bytes in SPD */
-		(datain[2] != 0x04) ||	/* if not SDRAM */
-		(!((datain[6] == 0x40) || (datain[6] == 0x48))) ||	/* or not (64 Bit or 72 Bit)  */
-		(datain[7] != 0x00) || (datain[8] != 0x01) ||	/* or not LVTTL signal levels */
-		(datain[126] == 0x66))	/* or a 66MHz modules */
-		SDRAM_err ("unsupported SDRAM");
-#ifdef SDRAM_DEBUG
-	serial_puts ("SDRAM sanity ok\n");
-#endif
-
-	/* get number of rows/cols/banks out of byte 3+4+5 */
-	rows = datain[3];
-	cols = datain[4];
-	banks = datain[5];
-
-	/* get number of SDRAM banks out of byte 17 and
-	   supported CAS latencies out of byte 18 */
-	sdram_banks = datain[17];
-	supported_cal = datain[18] & ~0x81;
-
-	while (t->mode != 0) {
-		if ((t->row == rows) && (t->col == cols)
-			&& (t->bank == sdram_banks))
-			break;
-		t++;
-	}							/* endwhile */
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("rows: ");
-	write_hex (rows);
-	serial_puts (" cols: ");
-	write_hex (cols);
-	serial_puts (" banks: ");
-	write_hex (banks);
-	serial_puts (" mode: ");
-	write_hex (t->mode);
-	serial_puts ("\n");
-#endif
-	if (t->mode == 0)
-		SDRAM_err ("unsupported SDRAM");
-	/* get tRP, tRCD, tRAS and density from byte 27+29+30+31 */
-#ifdef SDRAM_DEBUG
-	serial_puts ("tRP: ");
-	write_hex (datain[27]);
-	serial_puts ("\ntRCD: ");
-	write_hex (datain[29]);
-	serial_puts ("\ntRAS: ");
-	write_hex (datain[30]);
-	serial_puts ("\n");
-#endif
-
-	trp_clocks = (NSto10PS (datain[27]) + (tmemclk - 1)) / tmemclk;
-	trcd_clocks = (NSto10PS (datain[29]) + (tmemclk - 1)) / tmemclk;
-	tras_clocks = (NSto10PS (datain[30]) + (tmemclk - 1)) / tmemclk;
-	density = datain[31];
-
-	/* trc_clocks is sum of trp_clocks + tras_clocks */
-	trc_clocks = trp_clocks + tras_clocks;
-
-#ifdef SDRAM_DEBUG
-	/* ctp = ((trp + tras) - trp - trcd) => tras - trcd */
-	tctp_clocks =
-			((NSto10PS (datain[30]) - NSto10PS (datain[29])) +
-			 (tmemclk - 1)) / tmemclk;
-
-	serial_puts ("c_RP: ");
-	write_hex (trp_clocks);
-	serial_puts ("\nc_RCD: ");
-	write_hex (trcd_clocks);
-	serial_puts ("\nc_RAS: ");
-	write_hex (tras_clocks);
-	serial_puts ("\nc_RC: (RP+RAS): ");
-	write_hex (trc_clocks);
-	serial_puts ("\nc_CTP: ((RP+RAS)-RP-RCD): ");
-	write_hex (tctp_clocks);
-	serial_puts ("\nt_CTP: RAS - RCD: ");
-	write_hex ((unsigned
-				char) ((NSto10PS (datain[30]) -
-						NSto10PS (datain[29])) >> 8));
-	write_hex ((unsigned char) (NSto10PS (datain[30]) - NSto10PS (datain[29])));
-	serial_puts ("\ntmemclk: ");
-	write_hex ((unsigned char) (tmemclk >> 8));
-	write_hex ((unsigned char) (tmemclk));
-	serial_puts ("\n");
-#endif
-
-
-	cal_val = 255;
-	for (i = 6, cal_index = 0; (i > 0) && (cal_index < 3); i--) {
-		/* is this CAS latency supported ? */
-		if ((supported_cal >> i) & 0x01) {
-			buf[0] = datain[cal_indextable[cal_index]];
-			if (cal_index < 2) {
-				if (NS10to10PS (buf[0], spd_version) <= tmemclk)
-					cal_val = i;
-			} else {
-				/* SPD bytes 25+26 have another format */
-				if (NS4to10PS (buf[0], spd_version) <= tmemclk)
-					cal_val = i;
-			}	/* endif */
-			cal_index++;
-		}	/* endif */
-	}	/* endfor */
-#ifdef SDRAM_DEBUG
-	serial_puts ("CAL: ");
-	write_hex (cal_val + 1);
-	serial_puts ("\n");
-#endif
-
-	if (cal_val == 255)
-		SDRAM_err ("unsupported SDRAM");
-
-	/* get SDRAM timing register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
-	tmp = mfdcr (SDRAM0_CFGDATA) & ~0x018FC01F;
-	/* insert CASL value */
-/*  tmp |= ((unsigned long)cal_val) << 23; */
-	tmp |= ((unsigned long) cal_val) << 23;
-	/* insert PTA value */
-	tmp |= ((unsigned long) (trp_clocks - 1)) << 18;
-	/* insert CTP value */
-/*  tmp |= ((unsigned long)(trc_clocks - trp_clocks - trcd_clocks - 1)) << 16; */
-	tmp |= ((unsigned long) (trc_clocks - trp_clocks - trcd_clocks)) << 16;
-	/* insert LDF (always 01) */
-	tmp |= ((unsigned long) 0x01) << 14;
-	/* insert RFTA value */
-	tmp |= ((unsigned long) (trc_clocks - 4)) << 2;
-	/* insert RCD value */
-	tmp |= ((unsigned long) (trcd_clocks - 1)) << 0;
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("sdtr: ");
-	write_4hex (tmp);
-	serial_puts ("\n");
-#endif
-
-	/* write SDRAM timing register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
-	mtdcr (SDRAM0_CFGDATA, tmp);
-	baseaddr = CONFIG_SYS_SDRAM_BASE;
-	bank_size = (((unsigned long) density) << 22) / 2;
-	/* insert AM value */
-	tmp = ((unsigned long) t->mode - 1) << 13;
-	/* insert SZ value; */
-	switch (bank_size) {
-	case 0x00400000:
-		tmp |= ((unsigned long) 0x00) << 17;
-		break;
-	case 0x00800000:
-		tmp |= ((unsigned long) 0x01) << 17;
-		break;
-	case 0x01000000:
-		tmp |= ((unsigned long) 0x02) << 17;
-		break;
-	case 0x02000000:
-		tmp |= ((unsigned long) 0x03) << 17;
-		break;
-	case 0x04000000:
-		tmp |= ((unsigned long) 0x04) << 17;
-		break;
-	case 0x08000000:
-		tmp |= ((unsigned long) 0x05) << 17;
-		break;
-	case 0x10000000:
-		tmp |= ((unsigned long) 0x06) << 17;
-		break;
-	default:
-		SDRAM_err ("unsupported SDRAM");
-	}	/* endswitch */
-	/* get SDRAM bank 0 register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
-	bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
-	bank |= (baseaddr | tmp | 0x01);
-#ifdef SDRAM_DEBUG
-	serial_puts ("bank0: baseaddr: ");
-	write_4hex (baseaddr);
-	serial_puts (" banksize: ");
-	write_4hex (bank_size);
-	serial_puts (" mb0cf: ");
-	write_4hex (bank);
-	serial_puts ("\n");
-#endif
-	baseaddr += bank_size;
-	sdram_size += bank_size;
-
-	/* write SDRAM bank 0 register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
-	mtdcr (SDRAM0_CFGDATA, bank);
-
-	/* get SDRAM bank 1 register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
-	bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
-	sdram_size = 0;
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("bank1: baseaddr: ");
-	write_4hex (baseaddr);
-	serial_puts (" banksize: ");
-	write_4hex (bank_size);
-#endif
-	if (banks == 2) {
-		bank |= (baseaddr | tmp | 0x01);
-		baseaddr += bank_size;
-		sdram_size += bank_size;
-	}	/* endif */
-#ifdef SDRAM_DEBUG
-	serial_puts (" mb1cf: ");
-	write_4hex (bank);
-	serial_puts ("\n");
-#endif
-	/* write SDRAM bank 1 register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
-	mtdcr (SDRAM0_CFGDATA, bank);
-
-	/* get SDRAM bank 2 register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
-	bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
-
-	bank |= (baseaddr | tmp | 0x01);
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("bank2: baseaddr: ");
-	write_4hex (baseaddr);
-	serial_puts (" banksize: ");
-	write_4hex (bank_size);
-	serial_puts (" mb2cf: ");
-	write_4hex (bank);
-	serial_puts ("\n");
-#endif
-
-	baseaddr += bank_size;
-	sdram_size += bank_size;
-
-	/* write SDRAM bank 2 register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
-	mtdcr (SDRAM0_CFGDATA, bank);
-
-	/* get SDRAM bank 3 register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
-	bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
-
-#ifdef SDRAM_DEBUG
-	serial_puts ("bank3: baseaddr: ");
-	write_4hex (baseaddr);
-	serial_puts (" banksize: ");
-	write_4hex (bank_size);
-#endif
-
-	if (banks == 2) {
-		bank |= (baseaddr | tmp | 0x01);
-		baseaddr += bank_size;
-		sdram_size += bank_size;
-	}
-	/* endif */
-#ifdef SDRAM_DEBUG
-	serial_puts (" mb3cf: ");
-	write_4hex (bank);
-	serial_puts ("\n");
-#endif
-
-	/* write SDRAM bank 3 register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
-	mtdcr (SDRAM0_CFGDATA, bank);
-
-
-	/* get SDRAM refresh interval register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
-	tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000;
-
-	if (tmemclk < NSto10PS (16))
-		tmp |= 0x05F00000;
-	else
-		tmp |= 0x03F80000;
-
-	/* write SDRAM refresh interval register */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
-	mtdcr (SDRAM0_CFGDATA, tmp);
-
-	/* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
-	tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x80E00000;
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
-	mtdcr (SDRAM0_CFGDATA, tmp);
-
-
-   /*-------------------------------------------------------------------------+
-   | Interrupt controller setup for the PIP405 board.
-   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
-   |       IRQ 16    405GP internally generated; active low; level sensitive
-   |       IRQ 17-24 RESERVED
-   |       IRQ 25 (EXT IRQ 0) SouthBridg; active low; level sensitive
-   |       IRQ 26 (EXT IRQ 1) NMI: active low; level sensitive
-   |       IRQ 27 (EXT IRQ 2) SMI: active Low; level sensitive
-   |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
-   |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-   |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
-   |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
-   | Note for PIP405 board:
-   |       An interrupt taken for the SouthBridge (IRQ 25) indicates that
-   |       the Interrupt Controller in the South Bridge has caused the
-   |       interrupt. The IC must be read to determine which device
-   |       caused the interrupt.
-   |
-   +-------------------------------------------------------------------------*/
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr (UIC0CR, 0x00000000);	/* set all to be non-critical (for now) */
-	mtdcr (UIC0PR, 0xFFFFFF80);	/* set int polarities */
-	mtdcr (UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr (UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	int mode;
-
-	/*
-	 * since we are relocated, we can finally enable i-cache
-	 * and set up the flash CS correctly
-	 */
-	icache_enable();
-	setup_cs_reloc();
-	/* get and display boot mode */
-	mode = get_boot_mode();
-	if (mode & BOOT_PCI)
-		printf("PCI Boot %s Map\n", (mode & BOOT_MPS) ?
-			"MPS" : "Flash");
-	else
-		printf("%s Boot\n", (mode & BOOT_MPS) ?
-			"MPS" : "Flash");
-
-	return 0;
-}
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	char s[50];
-	unsigned char bc;
-	int i;
-	backup_t *b = (backup_t *) s;
-
-	puts ("Board: ");
-
-	i = getenv_f("serial#", (char *)s, 32);
-	if ((i == 0) || strncmp ((char *)s, "PIP405", 6)) {
-		get_backup_values (b);
-		if (strncmp (b->signature, "MPL\0", 4) != 0) {
-			puts ("### No HW ID - assuming PIP405");
-		} else {
-			b->serial_name[6] = 0;
-			printf ("%s SN: %s", b->serial_name,
-				&b->serial_name[7]);
-		}
-	} else {
-		s[6] = 0;
-		printf ("%s SN: %s", s, &s[7]);
-	}
-	bc = in8 (CONFIG_PORT_ADDR);
-	printf (" Boot Config: 0x%x\n", bc);
-	return (0);
-}
-
-
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-/*
-  dram_init() reads EEPROM via I2c. EEPROM contains all of
-  the necessary info for SDRAM controller configuration
-*/
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-static int test_dram (unsigned long ramsize);
-
-int dram_init(void)
-{
-	unsigned long bank_reg[4], tmp, bank_size;
-	int i, ds;
-	unsigned long TotalSize;
-
-	ds = 0;
-	/* since the DRAM controller is allready set up,
-	 * calculate the size with the bank registers
-	 */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
-	bank_reg[0] = mfdcr (SDRAM0_CFGDATA);
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
-	bank_reg[1] = mfdcr (SDRAM0_CFGDATA);
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
-	bank_reg[2] = mfdcr (SDRAM0_CFGDATA);
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
-	bank_reg[3] = mfdcr (SDRAM0_CFGDATA);
-	TotalSize = 0;
-	for (i = 0; i < 4; i++) {
-		if ((bank_reg[i] & 0x1) == 0x1) {
-			tmp = (bank_reg[i] >> 17) & 0x7;
-			bank_size = 4 << tmp;
-			TotalSize += bank_size;
-		} else
-			ds = 1;
-	}
-	if (ds == 1)
-		printf ("single-sided DIMM ");
-	else
-		printf ("double-sided DIMM ");
-	test_dram (TotalSize * 1024 * 1024);
-	/* bank 2 (SDRAM Clock 2) is not usable if 133MHz SDRAM IF */
-	(void) get_clocks();
-	if (gd->cpu_clk > 220000000)
-		TotalSize /= 2;
-	gd->ram_size = TotalSize * 1024 * 1024;
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-
-static int test_dram (unsigned long ramsize)
-{
-	/* not yet implemented */
-	return (1);
-}
-
-int misc_init_r (void)
-{
-	/* adjust flash start and size as well as the offset */
-	gd->bd->bi_flashstart=0-flash_info[0].size;
-	gd->bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN;
-	gd->bd->bi_flashoffset=0;
-
-	/* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
-	if (mfdcr(CPC0_PSR) & PSR_ROM_LOC)
-	       mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80));
-
-	return (0);
-}
-
-/***************************************************************************
- * some helping routines
- */
-
-int overwrite_console (void)
-{
-	/* return true if console should be overwritten */
-	return in8(CONFIG_PORT_ADDR) & 0x1;
-}
-
-
-extern int isa_init (void);
-
-
-void print_pip405_rev (void)
-{
-	unsigned char part, vers, cfg;
-
-	part = in8 (PLD_PART_REG);
-	vers = in8 (PLD_VERS_REG);
-	cfg = in8 (PLD_BOARD_CFG_REG);
-	printf ("Rev:   PIP405-%d Rev %c PLD%d %d PLD%d %d\n",
-			16 - ((cfg >> 4) & 0xf), (cfg & 0xf) + 'A', part & 0xf,
-			vers & 0xf, (part >> 4) & 0xf, (vers >> 4) & 0xf);
-}
-
-extern void check_env(void);
-
-
-int last_stage_init (void)
-{
-	print_pip405_rev ();
-	isa_init ();
-	stdio_print_current_devices ();
-	check_env();
-	return 0;
-}
-
-/************************************************************************
-* Print PIP405 Info
-************************************************************************/
-void print_pip405_info (void)
-{
-	unsigned char part, vers, cfg, ledu, sysman, flashcom, can, serpwr,
-			compwr, nicvga, scsirst;
-
-	part = in8 (PLD_PART_REG);
-	vers = in8 (PLD_VERS_REG);
-	cfg = in8 (PLD_BOARD_CFG_REG);
-	ledu = in8 (PLD_LED_USER_REG);
-	sysman = in8 (PLD_SYS_MAN_REG);
-	flashcom = in8 (PLD_FLASH_COM_REG);
-	can = in8 (PLD_CAN_REG);
-	serpwr = in8 (PLD_SER_PWR_REG);
-	compwr = in8 (PLD_COM_PWR_REG);
-	nicvga = in8 (PLD_NIC_VGA_REG);
-	scsirst = in8 (PLD_SCSI_RST_REG);
-	printf ("PLD Part %d version %d\n",
-		part & 0xf, vers & 0xf);
-	printf ("PLD Part %d version %d\n",
-		(part >> 4) & 0xf, (vers >> 4) & 0xf);
-	printf ("Board Revision %c\n", (cfg & 0xf) + 'A');
-	printf ("Population Options %d %d %d %d\n",
-		(cfg >> 4) & 0x1, (cfg >> 5) & 0x1,
-		(cfg >> 6) & 0x1, (cfg >> 7) & 0x1);
-	printf ("User LED0 %s User LED1 %s\n",
-		((ledu & 0x1) == 0x1) ? "on" : "off",
-		((ledu & 0x2) == 0x2) ? "on" : "off");
-	printf ("Additionally Options %d %d\n",
-		(ledu >> 2) & 0x1, (ledu >> 3) & 0x1);
-	printf ("User Config Switch %d %d %d %d\n",
-		(ledu >> 4) & 0x1, (ledu >> 5) & 0x1,
-		(ledu >> 6) & 0x1, (ledu >> 7) & 0x1);
-	switch (sysman & 0x3) {
-	case 0:
-		printf ("PCI Clocks are running\n");
-		break;
-	case 1:
-		printf ("PCI Clocks are stopped in POS State\n");
-		break;
-	case 2:
-		printf ("PCI Clocks are stopped when PCI_STP# is asserted\n");
-		break;
-	case 3:
-		printf ("PCI Clocks are stopped\n");
-		break;
-	}
-	switch ((sysman >> 2) & 0x3) {
-	case 0:
-		printf ("Main Clocks are running\n");
-		break;
-	case 1:
-		printf ("Main Clocks are stopped in POS State\n");
-		break;
-	case 2:
-	case 3:
-		printf ("PCI Clocks are stopped\n");
-		break;
-	}
-	printf ("INIT asserts %sINT2# (SMI)\n",
-			((sysman & 0x10) == 0x10) ? "" : "not ");
-	printf ("INIT asserts %sINT1# (NMI)\n",
-			((sysman & 0x20) == 0x20) ? "" : "not ");
-	printf ("INIT occurred %d\n", (sysman >> 6) & 0x1);
-	printf ("SER1 is routed to %s\n",
-			((flashcom & 0x1) == 0x1) ? "RS485" : "RS232");
-	printf ("COM2 is routed to %s\n",
-			((flashcom & 0x2) == 0x2) ? "RS485" : "RS232");
-	printf ("RS485 is configured as %s duplex\n",
-			((flashcom & 0x4) == 0x4) ? "full" : "half");
-	printf ("RS485 is connected to %s\n",
-			((flashcom & 0x8) == 0x8) ? "COM1" : "COM2");
-	printf ("SER1 uses handshakes %s\n",
-			((flashcom & 0x10) == 0x10) ? "DTR/DSR" : "RTS/CTS");
-	printf ("Bootflash is %swriteprotected\n",
-			((flashcom & 0x20) == 0x20) ? "not " : "");
-	printf ("Bootflash VPP is %s\n",
-			((flashcom & 0x40) == 0x40) ? "on" : "off");
-	printf ("Bootsector is %swriteprotected\n",
-			((flashcom & 0x80) == 0x80) ? "not " : "");
-	switch ((can) & 0x3) {
-	case 0:
-		printf ("CAN Controller is on address 0x1000..0x10FF\n");
-		break;
-	case 1:
-		printf ("CAN Controller is on address 0x8000..0x80FF\n");
-		break;
-	case 2:
-		printf ("CAN Controller is on address 0xE000..0xE0FF\n");
-		break;
-	case 3:
-		printf ("CAN Controller is disabled\n");
-		break;
-	}
-	switch ((can >> 2) & 0x3) {
-	case 0:
-		printf ("CAN Controller Reset is ISA Reset\n");
-		break;
-	case 1:
-		printf ("CAN Controller Reset is ISA Reset and POS State\n");
-		break;
-	case 2:
-	case 3:
-		printf ("CAN Controller is in reset\n");
-		break;
-	}
-	if (((can >> 4) < 3) || ((can >> 4) == 8) || ((can >> 4) == 13))
-		printf ("CAN Interrupt is disabled\n");
-	else
-		printf ("CAN Interrupt is ISA INT%d\n", (can >> 4) & 0xf);
-	switch (serpwr & 0x3) {
-	case 0:
-		printf ("SER0 Drivers are enabled\n");
-		break;
-	case 1:
-		printf ("SER0 Drivers are disabled in the POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("SER0 Drivers are disabled\n");
-		break;
-	}
-	switch ((serpwr >> 2) & 0x3) {
-	case 0:
-		printf ("SER1 Drivers are enabled\n");
-		break;
-	case 1:
-		printf ("SER1 Drivers are disabled in the POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("SER1 Drivers are disabled\n");
-		break;
-	}
-	switch (compwr & 0x3) {
-	case 0:
-		printf ("COM1 Drivers are enabled\n");
-		break;
-	case 1:
-		printf ("COM1 Drivers are disabled in the POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("COM1 Drivers are disabled\n");
-		break;
-	}
-	switch ((compwr >> 2) & 0x3) {
-	case 0:
-		printf ("COM2 Drivers are enabled\n");
-		break;
-	case 1:
-		printf ("COM2 Drivers are disabled in the POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("COM2 Drivers are disabled\n");
-		break;
-	}
-	switch ((nicvga) & 0x3) {
-	case 0:
-		printf ("PHY is running\n");
-		break;
-	case 1:
-		printf ("PHY is in Power save mode in POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("PHY is in Power save mode\n");
-		break;
-	}
-	switch ((nicvga >> 2) & 0x3) {
-	case 0:
-		printf ("VGA is running\n");
-		break;
-	case 1:
-		printf ("VGA is in Power save mode in POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("VGA is in Power save mode\n");
-		break;
-	}
-	printf ("PHY is %sreseted\n", ((nicvga & 0x10) == 0x10) ? "" : "not ");
-	printf ("VGA is %sreseted\n", ((nicvga & 0x20) == 0x20) ? "" : "not ");
-	printf ("Reserved Configuration is %d %d\n", (nicvga >> 6) & 0x1,
-			(nicvga >> 7) & 0x1);
-	switch ((scsirst) & 0x3) {
-	case 0:
-		printf ("SCSI Controller is running\n");
-		break;
-	case 1:
-		printf ("SCSI Controller is in Power save mode in POS state\n");
-		break;
-	case 2:
-	case 3:
-		printf ("SCSI Controller is in Power save mode\n");
-		break;
-	}
-	printf ("SCSI termination is %s\n",
-			((scsirst & 0x4) == 0x4) ? "disabled" : "enabled");
-	printf ("SCSI Controller is %sreseted\n",
-			((scsirst & 0x10) == 0x10) ? "" : "not ");
-	printf ("IDE disks are %sreseted\n",
-			((scsirst & 0x20) == 0x20) ? "" : "not ");
-	printf ("ISA Bus is %sreseted\n",
-			((scsirst & 0x40) == 0x40) ? "" : "not ");
-	printf ("Super IO is %sreseted\n",
-			((scsirst & 0x80) == 0x80) ? "" : "not ");
-}
-
-void user_led0 (unsigned char on)
-{
-	if (on == true)
-		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x1));
-	else
-		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfe));
-}
-
-void user_led1 (unsigned char on)
-{
-	if (on == true)
-		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x2));
-	else
-		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfd));
-}
-
-void ide_set_reset (int idereset)
-{
-	/* if reset = 1 IDE reset will be asserted */
-	unsigned char resreg;
-
-	resreg = in8 (PLD_SCSI_RST_REG);
-	if (idereset == 1)
-		resreg |= 0x20;
-	else {
-		udelay(10000);
-		resreg &= 0xdf;
-	}
-	out8 (PLD_SCSI_RST_REG, resreg);
-}
diff --git a/board/mpl/pip405/pip405.h b/board/mpl/pip405/pip405.h
deleted file mode 100644
index 1f07d79..0000000
--- a/board/mpl/pip405/pip405.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
- /****************************************************************************
- * Global routines used for PIP405
- *****************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-extern int  mem_test(unsigned long start, unsigned long ramsize,int mode);
-
-void print_pip405_info(void);
-
-void user_led0(unsigned char on);
-void user_led1(unsigned char on);
-
-
-#define PLD_BASE_ADDRESS		CONFIG_SYS_ISA_IO_BASE_ADDRESS + 0x800
-#define PLD_PART_REG			PLD_BASE_ADDRESS + 0
-#define PLD_VERS_REG			PLD_BASE_ADDRESS + 1
-#define PLD_BOARD_CFG_REG		PLD_BASE_ADDRESS + 2
-#define PLD_LED_USER_REG		PLD_BASE_ADDRESS + 3
-#define PLD_SYS_MAN_REG			PLD_BASE_ADDRESS + 4
-#define PLD_FLASH_COM_REG		PLD_BASE_ADDRESS + 5
-#define PLD_CAN_REG			PLD_BASE_ADDRESS + 6
-#define PLD_SER_PWR_REG			PLD_BASE_ADDRESS + 7
-#define PLD_COM_PWR_REG			PLD_BASE_ADDRESS + 8
-#define PLD_NIC_VGA_REG			PLD_BASE_ADDRESS + 9
-#define PLD_SCSI_RST_REG		PLD_BASE_ADDRESS + 0xA
-
-#define PIIX4_VENDOR_ID			0x8086
-#define PIIX4_IDE_DEV_ID		0x7111
-
-#endif
-
-/* timings */
-
-/* CS Config register (CS7) */
-#define CONFIG_PORT_BME	0	/* Burst disable */
-#define CONFIG_PORT_TWE	255	/* 255 * 30ns 120ns Waitstates (access=TWT+1+TH) */
-#define CONFIG_PORT_CSN	1	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define CONFIG_PORT_OEN	1	/* Cycles from CS low to OE low   */
-#define CONFIG_PORT_WBN	1	/* Cycles from CS low to WE low   */
-#define CONFIG_PORT_WBF	1	/* Cycles from WE high to CS high */
-#define CONFIG_PORT_TH	2	/* Number of hold cycles after transfer */
-#define CONFIG_PORT_RE	0	/* Ready disabled */
-#define CONFIG_PORT_SOR	1	/* Sample on Ready disabled */
-#define CONFIG_PORT_BEM	0	/* Byte Write only active on Write cycles */
-#define CONFIG_PORT_PEN	0	/* Parity disable */
-#define CONFIG_PORT_AP	((CONFIG_PORT_BME << 31) + (CONFIG_PORT_TWE << 23) + (CONFIG_PORT_CSN << 18) + (CONFIG_PORT_OEN << 16) + (CONFIG_PORT_WBN << 14) + \
-				(CONFIG_PORT_WBF << 12) + (CONFIG_PORT_TH << 9) + (CONFIG_PORT_RE << 8) + (CONFIG_PORT_SOR << 7) + (CONFIG_PORT_BEM << 6) + (CONFIG_PORT_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define CONFIG_PORT_BS	0	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define CONFIG_PORT_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define CONFIG_PORT_BW	0	/* 16Bit */
-#define CONFIG_PORT_CR	((CONFIG_PORT_ADDR & 0xfff00000) + (CONFIG_PORT_BS << 17) + (CONFIG_PORT_BU << 15) + (CONFIG_PORT_BW << 13))
-
-/* Flash CS0 or CS 1 */
-/* 0x7F8FFE80 slowest timing at all... */
-#define FLASH_BME_B	1	/* Burst enable */
-#define FLASH_FWT_B	0x6	/* 6 * 30ns 210ns First Wait Access */
-#define FLASH_BWT_B	0x6	/* 6 * 30ns 210ns Burst Wait Access */
-#define FLASH_BME	0	/* Burst disable */
-#define FLASH_TWE	0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
-#define FLASH_CSN	0	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define FLASH_OEN	1	/* Cycles from CS low to OE low   */
-#define FLASH_WBN	1	/* Cycles from CS low to WE low   */
-#define FLASH_WBF	1	/* Cycles from WE high to CS high */
-#define FLASH_TH	2	/* Number of hold cycles after transfer */
-#define FLASH_RE	0	/* Ready disabled */
-#define FLASH_SOR	1	/* Sample on Ready disabled */
-#define FLASH_BEM	0	/* Byte Write only active on Write cycles */
-#define FLASH_PEN	0	/* Parity disable */
-/* Access Parameter Register for non Boot */
-#define FLASH_AP	((FLASH_BME << 31) + (FLASH_TWE << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
-				(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
-/* Access Parameter Register for Boot */
-#define FLASH_AP_B	((FLASH_BME_B << 31) + (FLASH_FWT_B << 26) + (FLASH_BWT_B << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
-				(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define FLASH_BS	FLASH_SIZE_PRELIM	/* 4 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define FLASH_BU	3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define FLASH_BW	1	/* 16Bit */
-/* CR register for Boot */
-#define FLASH_CR_B	((FLASH_BASE_PRELIM & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
-/* CR register for non Boot */
-#define FLASH_CR	((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
-
-/* MPS CS1 or CS0 */
-/* Boot CS: */
-#define MPS_BME_B	1	/* Burst enable */
-#define MPS_FWT_B	0x6/* 6 * 30ns 210ns First Wait Access */
-#define MPS_BWT_B	0x6	/* 6 * 30ns 210ns Burst Wait Access */
-#define MPS_BME		0	/* Burst disable */
-#define MPS_TWE		0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
-#define MPS_CSN		0	/* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define MPS_OEN		1	/* Cycles from CS low to OE low   */
-#define MPS_WBN		1	/* Cycles from CS low to WE low   */
-#define MPS_WBF		1	/* Cycles from WE high to CS high */
-#define MPS_TH		2	/* Number of hold cycles after transfer */
-#define MPS_RE		0	/* Ready disabled */
-#define MPS_SOR		1	/* Sample on Ready disabled */
-#define MPS_BEM		0	/* Byte Write only active on Write cycles */
-#define MPS_PEN		0	/* Parity disable */
-/* Access Parameter Register for non Boot */
-#define MPS_AP		((MPS_BME << 31) + (MPS_TWE << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
-				(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
-/* Access Parameter Register for Boot */
-#define MPS_AP_B	((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
-				(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define MPS_BS		2	/* 4 MByte */
-#define MPS_BS_B		FLASH_SIZE_PRELIM	/* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define MPS_BU		3	/* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define MPS_BW		0	/* 8Bit */
-/* CR register for Boot */
-#define MPS_CR_B	((FLASH_BASE_PRELIM & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))
-/* CR register for non Boot */
-#define MPS_CR		((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))
diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug
deleted file mode 100644
index 890f592..0000000
--- a/board/mpl/pip405/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-    arch/powerpc/lib/extable.o	(.text)
-
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/t3corp/Kconfig b/board/t3corp/Kconfig
deleted file mode 100644
index 82ed4c9..0000000
--- a/board/t3corp/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_T3CORP
-
-config SYS_BOARD
-	default "t3corp"
-
-config SYS_CONFIG_NAME
-	default "t3corp"
-
-endif
diff --git a/board/t3corp/MAINTAINERS b/board/t3corp/MAINTAINERS
deleted file mode 100644
index eaf28c4..0000000
--- a/board/t3corp/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-T3CORP BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/t3corp/
-F:	include/configs/t3corp.h
-F:	configs/t3corp_defconfig
diff --git a/board/t3corp/Makefile b/board/t3corp/Makefile
deleted file mode 100644
index 928d895..0000000
--- a/board/t3corp/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2010
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= t3corp.o
-obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
-extra-y += init.o
diff --git a/board/t3corp/chip_config.c b/board/t3corp/chip_config.c
deleted file mode 100644
index 3a6c514..0000000
--- a/board/t3corp/chip_config.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx_config.h>
-
-struct ppc4xx_config ppc4xx_config_val[] = {
-	{
-		"600-67", "CPU: 600 PLB: 200 OPB:  67 EBC:  67",
-		{
-			0x86, 0x80, 0xce, 0x1f, 0x7d, 0x80, 0x00, 0xe0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"600-100", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"667", "CPU: 667 PLB: 166 OPB:  83 EBC:  83",
-		{
-			0x06, 0x80, 0xbb, 0x14, 0x99, 0x82, 0x00, 0xa0,
-			0x40, 0x88, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"800", "CPU: 800 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"1000", "CPU:1000 PLB: 200 OPB: 100 EBC: 100",
-		{
-			0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-	{
-		"1066", "CPU:1066 PLB: 266 OPB:  88 EBC:  88",
-		{
-			0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0,
-			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-		}
-	},
-};
-
-int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/t3corp/config.mk b/board/t3corp/config.mk
deleted file mode 100644
index f7ac755..0000000
--- a/board/t3corp/config.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# (C) Copyright 2010
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/t3corp/init.S b/board/t3corp/init.S
deleted file mode 100644
index 7ae9c43..0000000
--- a/board/t3corp/init.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-
-/*
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- */
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	/*
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
-	 * use the speed up boot process. It is patched after relocation to
-	 * enable SA_I
-	 */
-	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M,
-		 CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_RWX | SA_G)
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the DDR(2) detection
-	 * routine.
-	 */
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
-	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0,
-		 AC_RWX | SA_G)
-#endif
-
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xc,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xc,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xd,
-		 AC_RW | SA_IG)
-
-	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xd,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xd,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xd,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xd,
-		 AC_RW | SA_IG)
-
-	/* PCIe UTL register */
-	tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xc, AC_RW | SA_IG)
-
-	/* TLB-entry for FPGA(s) */
-	tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_16M, CONFIG_SYS_FPGA1_BASE, 4,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_FPGA1_BASE + (16 << 20), SZ_16M,
-		 CONFIG_SYS_FPGA1_BASE + (16 << 20), 4, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_16M, CONFIG_SYS_FPGA2_BASE, 4,
-		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_16M, CONFIG_SYS_FPGA3_BASE, 4,
-		 AC_RW | SA_IG)
-
-	/* TLB-entry for OCM */
-	tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4,
-		 AC_RWX | SA_I)
-
-	/* TLB-entry for Local Configuration registers => peripherals */
-	tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M,
-		 CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_RWX | SA_IG)
-
-	tlbtab_end
diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c
deleted file mode 100644
index 586c6f9..0000000
--- a/board/t3corp/t3corp.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc440.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <i2c.h>
-#include <mtd/cfi_flash.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/4xx_pcie.h>
-#include <asm/ppc4xx-gpio.h>
-
-int board_early_init_f(void)
-{
-	/*
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000005);	/* ATI & UIC1 crit are critical */
-	mtdcr(UIC0PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC0TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC0VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0x7fffffff);	/* per ref-board manual */
-	mtdcr(UIC1TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC2ER, 0x00000000);	/* disable all */
-	mtdcr(UIC2CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC2PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC2TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC2VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC3ER, 0x00000000);	/* disable all */
-	mtdcr(UIC3CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC3PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC3TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC3VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
-
-	/*
-	 * Configure PFC (Pin Function Control) registers
-	 * enable GPIO 49-63
-	 * UART0: 4 pins
-	 */
-	mtsdr(SDR0_PFC0, 0x00007fff);
-	mtsdr(SDR0_PFC1, 0x00040000);
-
-	/* Enable PCI host functionality in SDR0_PCI0 */
-	mtsdr(SDR0_PCI0, 0xe0000000);
-
-	mtsdr(SDR0_SRST1, 0);	/* Pull AHB out of reset default=1 */
-
-	/* Setup PLB4-AHB bridge based on the system address map */
-	mtdcr(AHB_TOP, 0x8000004B);
-	mtdcr(AHB_BOT, 0x8000004B);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: T3CORP");
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	/*
-	 * T3CORP has 64MBytes of NOR flash (Spansion 29GL512), but the
-	 * boot EBC mapping only supports a maximum of 16MBytes
-	 * (4.ff00.0000 - 4.ffff.ffff).
-	 * To solve this problem, the flash has to get remapped to another
-	 * EBC address which accepts bigger regions:
-	 *
-	 * 0xfn00.0000 -> 4.cn00.0000
-	 */
-
-	/* Remap the NOR flash to 0xcn00.0000 ... 0xcfff.ffff */
-	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | EBC_BXCR_BS_64MB |
-	      EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
-	/* Remove TLB entry of boot EBC mapping */
-	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
-
-	/* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */
-	program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
-		    CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
-
-	/*
-	 * Now accessing of the whole 64Mbytes of NOR flash at virtual address
-	 * 0xfc00.0000 is possible
-	 */
-
-	/*
-	 * Clear potential errors resulting from auto-calibration.
-	 * If not done, then we could get an interrupt later on when
-	 * exceptions are enabled.
-	 */
-	set_mcsr(get_mcsr());
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	u32 sdr0_srst1 = 0;
-	u32 eth_cfg;
-
-	/*
-	 * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
-	 * This is board specific, so let's do it here.
-	 */
-	mfsdr(SDR0_ETH_CFG, eth_cfg);
-	/* disable SGMII mode */
-	eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
-		     SDR0_ETH_CFG_SGMII1_ENABLE |
-		     SDR0_ETH_CFG_SGMII0_ENABLE);
-	/* Set the for 2 RGMII mode */
-	/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
-	eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
-	eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
-	mtsdr(SDR0_ETH_CFG, eth_cfg);
-
-	/*
-	 * The AHB Bridge core is held in reset after power-on or reset
-	 * so enable it now
-	 */
-	mfsdr(SDR0_SRST1, sdr0_srst1);
-	sdr0_srst1 &= ~SDR0_SRST1_AHB;
-	mtsdr(SDR0_SRST1, sdr0_srst1);
-
-	return 0;
-}
-
-int board_pcie_last(void)
-{
-	/*
-	 * Only PCIe0 for now, PCIe1 hangs on this board
-	 */
-	return 0;
-}
-
-/*
- * Board specific WRDTR and CLKTR values used by the auto-
- * calibration code (4xx_ibm_ddr2_autocalib.c).
- */
-static struct sdram_timing board_scan_options[] = {
-	{1, 2},
-	{-1, -1}
-};
-
-struct sdram_timing *ddr_scan_option(struct sdram_timing *default_val)
-{
-	return board_scan_options;
-}
-
-/*
- * Accessor functions replacing the "weak" functions in
- * drivers/mtd/cfi_flash.c
- *
- * The NOR flash devices "behind" the FPGA's (Xilinx DS617)
- * can only be read correctly in 16bit mode. We need to emulate
- * 8bit and 32bit reads here in the board specific code.
- */
-u8 flash_read8(void *addr)
-{
-	u16 val = __raw_readw((void *)((u32)addr & ~1));
-
-	if ((u32)addr & 1)
-		return val;
-
-	return val >> 8;
-}
-
-u32 flash_read32(void *addr)
-{
-	return (__raw_readw(addr) << 16) | __raw_readw((void *)((u32)addr + 2));
-}
-
-void flash_cmd_reset(flash_info_t *info)
-{
-	/*
-	 * FLASH at address CONFIG_SYS_FLASH_BASE is a Spansion chip and
-	 * needs the Spansion type reset commands. The other flash chip
-	 * is located behind a FPGA (Xilinx DS617) and needs the Intel type
-	 * reset command.
-	 */
-	if (info->start[0] == CONFIG_SYS_FLASH_BASE)
-		flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
-	else
-		flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-}
diff --git a/board/xes/xpedite1000/Kconfig b/board/xes/xpedite1000/Kconfig
deleted file mode 100644
index 4d0ab2f..0000000
--- a/board/xes/xpedite1000/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_XPEDITE1000
-
-config SYS_BOARD
-	default "xpedite1000"
-
-config SYS_VENDOR
-	default "xes"
-
-config SYS_CONFIG_NAME
-	default "xpedite1000"
-
-endif
diff --git a/board/xes/xpedite1000/MAINTAINERS b/board/xes/xpedite1000/MAINTAINERS
deleted file mode 100644
index 055ce6a..0000000
--- a/board/xes/xpedite1000/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-XPEDITE1000 BOARD
-M:	Peter Tyser <ptyser@xes-inc.com>
-S:	Maintained
-F:	board/xes/xpedite1000/
-F:	include/configs/xpedite1000.h
-F:	configs/xpedite1000_defconfig
diff --git a/board/xes/xpedite1000/Makefile b/board/xes/xpedite1000/Makefile
deleted file mode 100644
index 308de91..0000000
--- a/board/xes/xpedite1000/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= xpedite1000.o
-extra-y	+= init.o
diff --git a/board/xes/xpedite1000/README b/board/xes/xpedite1000/README
deleted file mode 100644
index 1da8b80..0000000
--- a/board/xes/xpedite1000/README
+++ /dev/null
@@ -1,82 +0,0 @@
-			   XES XPedite1000 Board
-
-		    Last Update: December 29, 2003
-=======================================================================
-
-This file contains some handy info regarding U-Boot and the XES
-XPedite1000 PPC440GX PrPMC board. See the README.ppc440 for additional
-information.
-
-
-SWITCH SETTINGS & JUMPERS
-==========================
-
-Jumpers selected for AMD29LV040B flash part as the boot flash.
-
-
-I2C Strap EEPROM & Environment Settings
-=======================================
-
-The XPedite1000 uses a single I2C eeprom for the 440 strappings and for
-the environment variables.  The first page (256 bytes) contains the
-strappings and the 2 EMAC HW Ethernet addresses.  Be careful not to
-change the 1st page of the EEPROM!  Unpopulated jumper J560 can get you
-out of trouble as it disables the strapping read from EEPROM.
-
-I2C probe
-=====================
-
-The i2c utilities work and have been tested on Rev B. of the 440GX. See
-README.ebony for more information about i2c probing with the 440.
-
-
-GETTING OUT OF I2C TROUBLE
-===========================
-
-(Direct quote from README.ebony)
-If you're like me ... you may have screwed up your bootstrap serial
-eeprom ... or worse, your SPD eeprom when experimenting with the
-i2c commands. If so, here are some ideas on how to get out of
-trouble:
-
-Serial bootstrap eeprom corruption:
------------------------------------
-Power down the board and set the following straps:
-
-J560 - closed
-
-This will select the default sys0 and sys1 settings (the serial
-eeproms are not used). Then power up the board and fix the serial
-eeprom using the 'i2c mm' command. Here are the values I currently
-use:
-
-=> i2c md 50 0 10
-
-0000: 85 7d 42 06 07 80 11 00 00 00 00 00 00 00 00 00    .}B.............
-
-Once you have the eeproms set correctly change the
-J560 straps as you desire.
-
-
-PPC440GX Ethernet EMACs
-=======================
-
-The XES XPedite1000 uses emac 2 & 3 and ignores emac 0 & 1.  PHYs are connected
-only to emac 2 & 3.  The HW Ethernet addresses are read from the i2c eeprom and
-placed in the bd info structure for enet2addr and enet3addr.  The ethernet driver
-senses that enetaddr and enet1addr are 0's and does not use them.
-
-As of this writing gigabit ethernet and the TCPIP acceleration hardware is not
-supported.
-
-
-Flash Support
-=============
-
-As of this writing, there is support for the 1/2mb boot flash only.  User flash
-is not yet supported.
-
-
-Regards,
---Travis
-<travis.sawyer@sandburst.com>
diff --git a/board/xes/xpedite1000/config.mk b/board/xes/xpedite1000/config.mk
deleted file mode 100644
index ec7651e..0000000
--- a/board/xes/xpedite1000/config.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# (C) Copyright 2002-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-#
-# XES XPedite1000 PPC440GX
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/xes/xpedite1000/init.S b/board/xes/xpedite1000/init.S
deleted file mode 100644
index 9708ecc..0000000
--- a/board/xes/xpedite1000/init.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
-* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#include <ppc_asm.tmpl>
-#include <asm/mmu.h>
-#include <config.h>
-#include <asm/ppc4xx.h>
-
-/*
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- * Pointer to the table is returned in r1
- */
-
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-	tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG)
-	tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG)
-	tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_RWX | SA_IG)
-	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG )
-	tlbentry( CONFIG_SYS_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_RWX | SA_IG )
-	tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG )
-	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG )
-	tlbtab_end
diff --git a/board/xes/xpedite1000/u-boot.lds.debug b/board/xes/xpedite1000/u-boot.lds.debug
deleted file mode 100644
index 04089ae..0000000
--- a/board/xes/xpedite1000/u-boot.lds.debug
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/ppc4xx/start.o	(.text)
-    board/xes/xpedite1000/init.o (.text)
-    arch/powerpc/cpu/ppc4xx/kgdb.o	(.text)
-    arch/powerpc/cpu/ppc4xx/traps.o	(.text)
-    arch/powerpc/cpu/ppc4xx/interrupts.o	(.text)
-    arch/powerpc/cpu/ppc4xx/4xx_uart.o	(.text)
-    arch/powerpc/cpu/ppc4xx/cpu_init.o	(.text)
-    arch/powerpc/cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/crc32.o		(.text)
-    arch/powerpc/lib/extable.o	(.text)
-    lib/zlib.o		(.text)
-
-/*    common/env_embedded.o(.text) */
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.eh_frame)
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c
deleted file mode 100644
index ef646fa..0000000
--- a/board/xes/xpedite1000/xpedite1000.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <console.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	unsigned long sdrreg;
-
-	/*
-	 * Enable GPIO for pins 18 - 24
-	 * 18 = SEEPROM_WP
-	 * 19 = #M_RST
-	 * 20 = #MONARCH
-	 * 21 = #LED_ALARM
-	 * 22 = #LED_ACT
-	 * 23 = #LED_STATUS1
-	 * 24 = #LED_STATUS2
-	 */
-	mfsdr(SDR0_PFC0, sdrreg);
-	mtsdr(SDR0_PFC0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00);
-	out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
-	LED0_OFF();
-	LED1_OFF();
-	LED2_OFF();
-	LED3_OFF();
-
-	/* Setup the external bus controller/chip selects */
-	mtebc(PB0AP, 0x04055200);	/* 16MB Strata FLASH */
-	mtebc(PB0CR, 0xff098000);	/* BAS=0xff0 16MB R/W 8-bit */
-	mtebc(PB1AP, 0x04055200);	/* 512KB Socketed AMD FLASH */
-	mtebc(PB1CR, 0xfe018000);	/* BAS=0xfe0 1MB R/W 8-bit */
-	mtebc(PB6AP, 0x05006400);	/* 32-64MB AMD MirrorBit FLASH */
-	mtebc(PB6CR, 0xf00da000);	/* BAS=0xf00 64MB R/W i6-bit */
-	mtebc(PB7AP, 0x05006400);	/* 32-64MB AMD MirrorBit FLASH */
-	mtebc(PB7CR, 0xf40da000);	/* BAS=0xf40 64MB R/W 16-bit */
-
-	/*
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *
-	 * Because of the interrupt handling rework to handle 440GX interrupts
-	 * with the common code, we needed to change names of the UIC registers.
-	 * Here the new relationship:
-	 *
-	 * U-Boot name	440GX name
-	 * -----------------------
-	 * UIC0		UICB0
-	 * UIC1		UIC0
-	 * UIC2		UIC1
-	 * UIC3		UIC2
-	 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000003);	/* SMI & UIC1 crit are critical */
-	mtdcr(UIC1PR, 0xfffffe00);	/* per ref-board manual */
-	mtdcr(UIC1TR, 0x01c00000);	/* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC2ER, 0x00000000);	/* disable all */
-	mtdcr(UIC2CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC2PR, 0xffffc0ff);	/* per ref-board manual */
-	mtdcr(UIC2TR, 0x00ff8000);	/* per ref-board manual */
-	mtdcr(UIC2VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC3ER, 0x00000000);	/* disable all */
-	mtdcr(UIC3CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC3PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC3TR, 0x00ff8c0f);	/* per ref-board manual */
-	mtdcr(UIC3VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC0SR, 0xfc000000);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC0PR, 0xfc000000);	/* */
-	mtdcr(UIC0TR, 0x00000000);	/* */
-	mtdcr(UIC0VR, 0x00000001);	/* */
-
-	LED0_ON();
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i;
-
-	printf("Board: X-ES %s PMC SBC\n", CONFIG_SYS_BOARD_NAME);
-	printf("       ");
-	i = getenv_f("board_rev", buf, sizeof(buf));
-	if (i > 0)
-		printf("Rev %s, ", buf);
-	i = getenv_f("serial#", buf, sizeof(buf));
-	if (i > 0)
-		printf("Serial# %s, ", buf);
-	i = getenv_f("board_cfg", buf, sizeof(buf));
-	if (i > 0)
-		printf("Cfg %s", buf);
-	printf("\n");
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = spd_sdram();
-
-	return 0;
-}
-
-/*
- * Override weak pci_pre_init()
- *
- * This routine is called just prior to registering the hose and gives
- * the board the opportunity to check things. Returning a value of zero
- * indicates that things are bad & PCI initialization should be aborted.
- *
- * Different boards may wish to customize the pci controller structure
- * (add regions, override default access routines, etc) or perform
- * certain pre-initialization actions.
- */
-#if defined(CONFIG_PCI)
-int pci_pre_init(struct pci_controller * hose)
-{
-	unsigned long strap;
-
-	/* See if we're supposed to setup the pci */
-	mfsdr(SDR0_SDSTP1, strap);
-	if ((strap & 0x00010000) == 0)
-		return 0;
-
-#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
-	/* Setup System Device Register PCIL0_XCR */
-	mfsdr(SDR0_XCR, strap);
-	strap &= 0x0f000000;
-	mtsdr(SDR0_XCR, strap);
-#endif
-
-	return 1;
-}
-#endif /* defined(CONFIG_PCI) */
-
-#if defined(CONFIG_PCI)
-/*
- * Override weak is_pci_host()
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
- *
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
- */
-int is_pci_host(struct pci_controller *hose)
-{
-	return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0);
-}
-#endif /* defined(CONFIG_PCI) */
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
-	return ctrlc();
-}
-#endif
diff --git a/board/xilinx/ppc405-generic/Kconfig b/board/xilinx/ppc405-generic/Kconfig
deleted file mode 100644
index dfbc07b..0000000
--- a/board/xilinx/ppc405-generic/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_XILINX_PPC405_GENERIC
-
-config SYS_BOARD
-	default "ppc405-generic"
-
-config SYS_VENDOR
-	default "xilinx"
-
-config SYS_CONFIG_NAME
-	default "xilinx-ppc405-generic"
-
-endif
diff --git a/board/xilinx/ppc405-generic/MAINTAINERS b/board/xilinx/ppc405-generic/MAINTAINERS
deleted file mode 100644
index ba48f50..0000000
--- a/board/xilinx/ppc405-generic/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-PPC405-GENERIC BOARD
-M:	Ricardo Ribalda <ricardo.ribalda@gmail.com>
-S:	Maintained
-F:	board/xilinx/ppc405-generic/
-F:	include/configs/xilinx-ppc405-generic.h
-F:	configs/xilinx-ppc405-generic_defconfig
-F:	configs/xilinx-ppc405-generic_flash_defconfig
diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile
deleted file mode 100644
index 2800f68..0000000
--- a/board/xilinx/ppc405-generic/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
-# Work supported by Qtechnology http://www.qtec.com
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= xilinx_ppc405_generic.o
diff --git a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
deleted file mode 100644
index be6b4dc..0000000
--- a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
- * This work has been supported by: QTechnology  http://qtec.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-ulong get_PCI_freq(void)
-{
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts("Xilinx PPC405 Generic Board\n");
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
-			    CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
-
-	return 0;
-}
-
-void get_sys_info(sys_info_t *sys_info)
-{
-	sys_info->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
-	sys_info->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
-	sys_info->freqPCI = 0;
-
-	return;
-}
-
-int get_serial_clock(void){
-	return XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
-}
diff --git a/board/xilinx/ppc405-generic/xparameters.h b/board/xilinx/ppc405-generic/xparameters.h
deleted file mode 100644
index c3df9e5..0000000
--- a/board/xilinx/ppc405-generic/xparameters.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
- * This work has been supported by: QTechnology  http://qtec.com/
- * based on xparameters-ml507.h by Xilinx
- *
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#ifndef XPARAMETER_H
-#define XPARAMETER_H
-
-#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
-#define XPAR_IIC_EEPROM_BASEADDR	0x81600000
-#define XPAR_INTC_0_BASEADDR		0x81800000
-#define XPAR_SPI_0_BASEADDR             0x83400000
-#define XPAR_FLASH_MEM0_BASEADDR	0xFE000000
-#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS	32
-#define XPAR_SPI_0_NUM_TRANSFER_BITS	8
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ	100000000
-
-#endif
diff --git a/board/xilinx/ppc440-generic/Kconfig b/board/xilinx/ppc440-generic/Kconfig
deleted file mode 100644
index d40783a..0000000
--- a/board/xilinx/ppc440-generic/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_XILINX_PPC440_GENERIC
-
-config SYS_BOARD
-	default "ppc440-generic"
-
-config SYS_VENDOR
-	default "xilinx"
-
-config SYS_CONFIG_NAME
-	default "xilinx-ppc440-generic"
-
-endif
diff --git a/board/xilinx/ppc440-generic/MAINTAINERS b/board/xilinx/ppc440-generic/MAINTAINERS
deleted file mode 100644
index 0258c82..0000000
--- a/board/xilinx/ppc440-generic/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-PPC440-GENERIC BOARD
-M:	Ricardo Ribalda <ricardo.ribalda@gmail.com>
-S:	Maintained
-F:	board/xilinx/ppc440-generic/
-F:	include/configs/xilinx-ppc440-generic.h
-F:	configs/xilinx-ppc440-generic_defconfig
-F:	configs/xilinx-ppc440-generic_flash_defconfig
diff --git a/board/xilinx/ppc440-generic/Makefile b/board/xilinx/ppc440-generic/Makefile
deleted file mode 100644
index 4d5f410..0000000
--- a/board/xilinx/ppc440-generic/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
-# Work supported by Qtechnology http://www.qtec.com
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= xilinx_ppc440_generic.o
-extra-y += init.o
diff --git a/board/xilinx/ppc440-generic/init.S b/board/xilinx/ppc440-generic/init.S
deleted file mode 100644
index f9ff35f..0000000
--- a/board/xilinx/ppc440-generic/init.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *  (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
- *  This work has been supported by: QTechnology  http://qtec.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-
-.section .bootpg,"ax"
-.globl tlbtab
-
-tlbtab:
-tlbtab_start
-tlbentry(0x00000000, SZ_256M, 0x00000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0x10000000, SZ_256M, 0x10000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0x20000000, SZ_256M, 0x20000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0x30000000, SZ_256M, 0x30000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0x40000000, SZ_256M, 0x40000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0x50000000, SZ_256M, 0x50000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0x60000000, SZ_256M, 0x60000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0x70000000, SZ_256M, 0x70000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0x80000000, SZ_256M, 0x80000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0x90000000, SZ_256M, 0x90000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0xa0000000, SZ_256M, 0xa0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0xb0000000, SZ_256M, 0xb0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0xc0000000, SZ_256M, 0xc0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0xd0000000, SZ_256M, 0xd0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0xe0000000, SZ_256M, 0xe0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbentry(0xf0000000, SZ_256M, 0xf0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
-tlbtab_end
diff --git a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
deleted file mode 100644
index 07a3ab7..0000000
--- a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
- * This work has been supported by: QTechnology  http://qtec.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#include <config.h>
-#include <common.h>
-#include <netdev.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	puts("Xilinx PPC440 Generic Board\n");
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
-			    CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
-
-	return 0;
-}
-
-void get_sys_info(sys_info_t *sys_info)
-{
-	sys_info->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
-	sys_info->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
-	sys_info->freqPCI = 0;
-
-	return;
-}
-
-int get_serial_clock(void){
-	return XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int ret = 0;
-
-	puts("Init xilinx temac\n");
-#ifdef XPAR_LLTEMAC_0_BASEADDR
-	ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_0_BASEADDR,
-			XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
-			XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR);
-
-#endif
-
-#ifdef XPAR_LLTEMAC_1_BASEADDR
-	ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_1_BASEADDR,
-			XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
-			XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR);
-#endif
-
-	return ret;
-}
diff --git a/board/xilinx/ppc440-generic/xparameters.h b/board/xilinx/ppc440-generic/xparameters.h
deleted file mode 100644
index b45a6a1..0000000
--- a/board/xilinx/ppc440-generic/xparameters.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
- * This work has been supported by: QTechnology  http://qtec.com/
- * based on xparameters-ml507.h by Xilinx
- *
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#ifndef XPARAMETER_H
-#define XPARAMETER_H
-
-#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
-#define XPAR_IIC_EEPROM_BASEADDR	0x81600000
-#define XPAR_INTC_0_BASEADDR		0x87000000
-#define XPAR_FLASH_MEM0_BASEADDR	0xF0000000
-#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS	32
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ	100000000
-#define XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR 0x80
-#define XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR 0x98
-#define XPAR_LLTEMAC_0_BASEADDR		0x83000000
-#define XPAR_LLTEMAC_1_BASEADDR		0x83000040
-
-#endif