diff options
author | Stefano Babic <sbabic@denx.de> | 2012-08-19 21:33:50 +0000 |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-09-01 14:58:27 +0200 |
commit | 5fecb36ca0c5642259227bba9aed94727e084c17 (patch) | |
tree | a32cab7f29101204db24d9c8f962a9a30071e8c3 /board | |
parent | c55068e5b86b2fac47a20d8d4ab2c877d9702bda (diff) | |
download | u-boot-5fecb36ca0c5642259227bba9aed94727e084c17.zip u-boot-5fecb36ca0c5642259227bba9aed94727e084c17.tar.gz u-boot-5fecb36ca0c5642259227bba9aed94727e084c17.tar.bz2 |
MX: Set a common gpio.h for all i.MX
Each i.MX has its own gpio.h, defining the same structure.
The internal GPIO controller has the same layout
(at least for the register used by u-boot) and can be shared.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Tested-by: Matt Sealey <matt@genesi-usa.com>
Diffstat (limited to 'board')
-rw-r--r-- | board/freescale/mx6qsabrelite/mx6qsabrelite.c | 28 | ||||
-rw-r--r-- | board/karo/tx25/tx25.c | 10 | ||||
-rw-r--r-- | board/syteco/zmx25/zmx25.c | 26 |
3 files changed, 32 insertions, 32 deletions
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index cb85597..db0de63 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -87,12 +87,12 @@ struct i2c_pads_info i2c_pad_info0 = { .scl = { .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC, .gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC, - .gp = GPIO_NUMBER(3, 21) + .gp = IMX_GPIO_NR(3, 21) }, .sda = { .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC, .gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC, - .gp = GPIO_NUMBER(3, 28) + .gp = IMX_GPIO_NR(3, 28) } }; @@ -101,12 +101,12 @@ struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC, .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC, - .gp = GPIO_NUMBER(4, 12) + .gp = IMX_GPIO_NR(4, 12) }, .sda = { .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC, .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC, - .gp = GPIO_NUMBER(4, 13) + .gp = IMX_GPIO_NR(4, 13) } }; @@ -115,12 +115,12 @@ struct i2c_pads_info i2c_pad_info2 = { .scl = { .i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC, .gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC, - .gp = GPIO_NUMBER(1, 5) + .gp = IMX_GPIO_NR(1, 5) }, .sda = { .i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC, .gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC, - .gp = GPIO_NUMBER(7, 11) + .gp = IMX_GPIO_NR(7, 11) } }; @@ -229,9 +229,9 @@ int board_ehci_hcd_init(int port) imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); /* Reset USB hub */ - gpio_direction_output(GPIO_NUMBER(7, 12), 0); + gpio_direction_output(IMX_GPIO_NR(7, 12), 0); mdelay(2); - gpio_set_value(GPIO_NUMBER(7, 12), 1); + gpio_set_value(IMX_GPIO_NR(7, 12), 1); return 0; } @@ -413,12 +413,12 @@ struct button_key { }; static struct button_key const buttons[] = { - {"back", GPIO_NUMBER(2, 2), 'B'}, - {"home", GPIO_NUMBER(2, 4), 'H'}, - {"menu", GPIO_NUMBER(2, 1), 'M'}, - {"search", GPIO_NUMBER(2, 3), 'S'}, - {"volup", GPIO_NUMBER(7, 13), 'V'}, - {"voldown", GPIO_NUMBER(4, 5), 'v'}, + {"back", IMX_GPIO_NR(2, 2), 'B'}, + {"home", IMX_GPIO_NR(2, 4), 'H'}, + {"menu", IMX_GPIO_NR(2, 1), 'M'}, + {"search", IMX_GPIO_NR(2, 3), 'S'}, + {"volup", IMX_GPIO_NR(7, 13), 'V'}, + {"voldown", IMX_GPIO_NR(4, 5), 'v'}, }; /* diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c index 07fd98d..0fd41c7 100644 --- a/board/karo/tx25/tx25.c +++ b/board/karo/tx25/tx25.c @@ -34,8 +34,8 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_FEC_MXC -#define GPIO_FEC_RESET_B MXC_GPIO_PORT_TO_NUM(4, 7) -#define GPIO_FEC_ENABLE_B MXC_GPIO_PORT_TO_NUM(4, 9) +#define GPIO_FEC_RESET_B IMX_GPIO_NR(4, 7) +#define GPIO_FEC_ENABLE_B IMX_GPIO_NR(4, 9) void tx25_fec_init(void) { struct iomuxc_mux_ctl *muxctl; @@ -103,9 +103,9 @@ void tx25_fec_init(void) /* * set each to 1 and make each an output */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 10), 1); - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 11), 1); - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 12), 1); + gpio_direction_output(IMX_GPIO_NR(3, 10), 1); + gpio_direction_output(IMX_GPIO_NR(3, 11), 1); + gpio_direction_output(IMX_GPIO_NR(3, 12), 1); mdelay(22); /* this value came from RedBoot */ diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c index c56b195..fe5589d 100644 --- a/board/syteco/zmx25/zmx25.c +++ b/board/syteco/zmx25/zmx25.c @@ -56,7 +56,7 @@ int board_init() /* Setup of core volatage selection pin to run at 1.4V */ writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 15), 1); + gpio_direction_output(IMX_GPIO_NR(3, 15), 1); /* Setup of input daisy chains for SD card pins*/ writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd); @@ -68,10 +68,10 @@ int board_init() /* Setup of digital output for USB power and OC */ writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 28), 1); + gpio_direction_output(IMX_GPIO_NR(1, 28), 1); writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */ - gpio_direction_input(MXC_GPIO_PORT_TO_NUM(1, 18)); + gpio_direction_input(IMX_GPIO_NR(1, 18)); /* Setup of digital output control pins */ writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */ @@ -83,21 +83,21 @@ int board_init() writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */ /* Switch both output drivers off */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 7), 0); - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 6), 0); + gpio_direction_output(IMX_GPIO_NR(1, 7), 0); + gpio_direction_output(IMX_GPIO_NR(1, 6), 0); /* Setup of key input pin GPIO2[29]*/ writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0); writel(0, &padctl->pad_kpp_row0); /* Key pull up off */ - gpio_direction_input(MXC_GPIO_PORT_TO_NUM(2, 29)); + gpio_direction_input(IMX_GPIO_NR(2, 29)); /* Setup of status LED outputs */ writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */ writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */ /* Switch both LEDs off */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(4, 21), 0); - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 29), 0); + gpio_direction_output(IMX_GPIO_NR(4, 21), 0); + gpio_direction_output(IMX_GPIO_NR(1, 29), 0); /* Setup of CAN1 and CAN2 signals */ writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */ @@ -148,12 +148,12 @@ int board_late_init(void) writel(gpio_mux_mode2, &muxctl->pad_uart2_cts); /* assert PHY reset (low) */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 16), 0); + gpio_direction_output(IMX_GPIO_NR(3, 16), 0); udelay(5000); /* deassert PHY reset */ - gpio_set_value(MXC_GPIO_PORT_TO_NUM(3, 16), 1); + gpio_set_value(IMX_GPIO_NR(3, 16), 1); udelay(5000); #endif @@ -161,12 +161,12 @@ int board_late_init(void) e = getenv("gs_base_board"); if (e != NULL) { if (strcmp(e, "G283") == 0) { - int key = gpio_get_value(MXC_GPIO_PORT_TO_NUM(2, 29)); + int key = gpio_get_value(IMX_GPIO_NR(2, 29)); if (key) { /* Switch on both LEDs to inidcate boot mode */ - gpio_set_value(MXC_GPIO_PORT_TO_NUM(1, 29), 0); - gpio_set_value(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + gpio_set_value(IMX_GPIO_NR(1, 29), 0); + gpio_set_value(IMX_GPIO_NR(4, 21), 0); setenv("preboot", "run gs_slow_boot"); } else |