Merge git://git.denx.de/u-boot-video

6 files changed, 30 insertions, 460 deletions

diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index be6dd4a..d69831a 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -13,12 +13,6 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
 #include <debug_uart.h>
-#include <lcd.h>
-#include <atmel_hlcdc.h>
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-#endif
 #include <asm/mach-types.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -86,103 +80,15 @@ static void at91sam9x5ek_nand_hw_init(void)
 }
 #endif
 
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
-	.vl_col	= 800,
-	.vl_row = 480,
-	.vl_clk = 24000000,
-	.vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL,
-	.vl_bpix = LCD_BPP,
-	.vl_tft = 1,
-	.vl_clk_pol = 1,
-	.vl_hsync_len = 128,
-	.vl_left_margin = 64,
-	.vl_right_margin = 64,
-	.vl_vsync_len = 2,
-	.vl_upper_margin = 22,
-	.vl_lower_margin = 21,
-	.mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
-	if (has_lcdc())
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 1);	/* power up */
-}
-
-void lcd_disable(void)
-{
-	if (has_lcdc())
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* power down */
-}
-
-static void at91sam9x5ek_lcd_hw_init(void)
-{
-	if (has_lcdc()) {
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDPWM */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDVSYNC */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0);	/* LCDHSYNC */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDDISP */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* LCDDEN */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0);	/* LCDPCK */
-
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* LCDD0 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* LCDD1 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* LCDD2 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0);	/* LCDD3 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0);	/* LCDD4 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0);	/* LCDD5 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* LCDD6 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* LCDD7 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* LCDD8 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* LCDD9 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDD10 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDD11 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0);	/* LCDD12 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0);	/* LCDD13 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDD14 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDD15 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDD16 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0);	/* LCDD17 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDD18 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDD19 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0);	/* LCDD20 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0);	/* LCDD21 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDD22 */
-		at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDD23 */
-
-		at91_periph_clk_enable(ATMEL_ID_LCDC);
-	}
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
 {
-	ulong dram_size, nand_size;
-	int i;
-	char temp[32];
-
-	if (has_lcdc()) {
-		lcd_printf("%s\n", U_BOOT_VERSION);
-		lcd_printf("(C) 2012 ATMEL Corp\n");
-		lcd_printf("at91support@atmel.com\n");
-		lcd_printf("%s CPU at %s MHz\n",
-			get_cpu_name(),
-			strmhz(temp, get_cpu_clk_rate()));
-
-		dram_size = 0;
-		for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-			dram_size += gd->bd->bi_dram[i].size;
-		nand_size = 0;
-		for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-			nand_size += get_nand_dev_by_index(i)->size;
-		lcd_printf("  %ld MB SDRAM, %ld MB NAND\n",
-			dram_size >> 20,
-			nand_size >> 20);
-	}
+#ifdef CONFIG_DM_VIDEO
+	at91_video_show_board_info();
+#endif
+	return 0;
 }
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
+#endif
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 void board_debug_uart_init(void)
@@ -216,9 +122,6 @@ int board_init(void)
 #if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI_HCD)
 	at91_uhp_hw_init();
 #endif
-#ifdef CONFIG_LCD
-	at91sam9x5ek_lcd_hw_init();
-#endif
 	return 0;
 }
 
diff --git a/board/atmel/common/video_display.c b/board/atmel/common/video_display.c
index 39ad619..b20abc7 100644
--- a/board/atmel/common/video_display.c
+++ b/board/atmel/common/video_display.c
@@ -43,7 +43,7 @@ int at91_video_show_board_info(void)
 	nand_size = 0;
 #ifdef CONFIG_NAND_ATMEL
 	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += nand_info[i]->size;
+		nand_size += get_nand_dev_by_index(i)->size;
 #endif
 
 	len += sprintf(&buf[len], "%ld MB SDRAM, %ld MB NAND\n",
diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index 5758653..778142a 100644
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -6,10 +6,7 @@
  */
 
 #include <common.h>
-#include <atmel_hlcdc.h>
 #include <debug_uart.h>
-#include <lcd.h>
-#include <version.h>
 #include <asm/io.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/atmel_pio4.h>
@@ -26,90 +23,15 @@ static void board_usb_hw_init(void)
 	atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1);
 }
 
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
-	.vl_col = 480,
-	.vl_row = 272,
-	.vl_clk = 9000000,
-	.vl_bpix = LCD_BPP,
-	.vl_tft = 1,
-	.vl_hsync_len = 41,
-	.vl_left_margin = 2,
-	.vl_right_margin = 2,
-	.vl_vsync_len = 11,
-	.vl_upper_margin = 2,
-	.vl_lower_margin = 2,
-	.mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void)	{ /* Empty! */ }
-void lcd_disable(void)	{ /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
 {
-	return 1;
-}
-
-static void board_lcd_hw_init(void)
-{
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0);	/* LCDPWM */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* LCDDISP */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0);	/* LCDVSYNC */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0);	/* LCDHSYNC */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTD,  0, 0);	/* LCDPCK */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTD,  1, 0);	/* LCDDEN */
-
-	/* LCDDAT0 */
-	/* LCDDAT1 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDDAT2 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDDAT3 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0);	/* LCDDAT4 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0);	/* LCDDAT5 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDDAT6 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDDAT7 */
-
-	/* LCDDAT8 */
-	/* LCDDAT9 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDDAT10 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0);	/* LCDDAT11 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDDAT12 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDDAT13 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0);	/* LCDDAT14 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0);	/* LCDDAT15 */
-
-	/* LCDD16 */
-	/* LCDD17 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDDAT18 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDDAT19 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDDAT20 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0);	/* LCDDAT21 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDDAT22 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDDAT23 */
-
-	at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
-	ulong dram_size;
-	int i;
-	char temp[32];
-
-	lcd_printf("%s\n", U_BOOT_VERSION);
-	lcd_printf("2015 ATMEL Corp\n");
-	lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
-		   strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-
-	lcd_printf("%ld MB SDRAM\n", dram_size >> 20);
+#ifdef CONFIG_DM_VIDEO
+	at91_video_show_board_info();
+#endif
+	return 0;
 }
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
+#endif
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 static void board_uart1_hw_init(void)
@@ -142,9 +64,6 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-#ifdef CONFIG_LCD
-	board_lcd_hw_init();
-#endif
 #ifdef CONFIG_CMD_USB
 	board_usb_hw_init();
 #endif
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index 6d473fc..98d846f 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -13,9 +13,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <debug_uart.h>
-#include <lcd.h>
 #include <linux/ctype.h>
-#include <atmel_hlcdc.h>
 #include <phy.h>
 #include <micrel.h>
 #include <spl.h>
@@ -132,80 +130,6 @@ static void sama5d3xek_mci_hw_init(void)
 }
 #endif
 
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
-	.vl_col = 800,
-	.vl_row = 480,
-	.vl_clk = 24000000,
-	.vl_bpix = LCD_BPP,
-	.vl_tft = 1,
-	.vl_hsync_len = 128,
-	.vl_left_margin = 64,
-	.vl_right_margin = 64,
-	.vl_vsync_len = 2,
-	.vl_upper_margin = 22,
-	.vl_lower_margin = 21,
-	.mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
-}
-
-void lcd_disable(void)
-{
-}
-
-static void sama5d3xek_lcd_hw_init(void)
-{
-	gd->fb_base = CONFIG_SAMA5D3_LCD_BASE;
-
-	/* The higher 8 bit of LCD is board related */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 14, 0);	/* LCDD16 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 13, 0);	/* LCDD17 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 12, 0);	/* LCDD18 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 11, 0);	/* LCDD19 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 10, 0);	/* LCDD20 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTC, 15, 0);	/* LCDD21 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTE, 27, 0);	/* LCDD22 */
-	at91_pio3_set_c_periph(AT91_PIO_PORTE, 28, 0);	/* LCDD23 */
-
-	/* Configure lower 16 bit of LCD and enable clock */
-	at91_lcd_hw_init();
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
-	ulong dram_size;
-	uint64_t nand_size;
-	int i;
-	char temp[32];
-
-	lcd_printf("%s\n", U_BOOT_VERSION);
-	lcd_printf("(C) 2013 ATMEL Corp\n");
-	lcd_printf("at91@atmel.com\n");
-	lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
-		   strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-
-	nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += get_nand_dev_by_index(i)->size;
-#endif
-	lcd_printf("%ld MB SDRAM, %lld MB NAND\n",
-		   dram_size >> 20, nand_size >> 20);
-}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
-
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 void board_debug_uart_init(void)
 {
@@ -240,10 +164,6 @@ int board_init(void)
 #ifdef CONFIG_GENERIC_ATMEL_MCI
 	sama5d3xek_mci_hw_init();
 #endif
-#ifdef CONFIG_LCD
-	if (has_lcdc())
-		sama5d3xek_lcd_hw_init();
-#endif
 	return 0;
 }
 
@@ -269,6 +189,9 @@ int board_late_init(void)
 	strcat(name, "ek.dtb");
 	env_set("dtb_name", name);
 #endif
+#ifdef CONFIG_DM_VIDEO
+	at91_video_show_board_info();
+#endif
 	return 0;
 }
 #endif
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 9236a28..78eddb8 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -14,11 +14,7 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/sama5d3_smc.h>
 #include <asm/arch/sama5d4.h>
-#include <atmel_hlcdc.h>
 #include <debug_uart.h>
-#include <lcd.h>
-#include <nand.h>
-#include <version.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -73,98 +69,15 @@ static void sama5d4_xplained_usb_hw_init(void)
 }
 #endif
 
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
-	.vl_col = 480,
-	.vl_row = 272,
-	.vl_clk = 9000000,
-	.vl_bpix = LCD_BPP,
-	.vl_tft = 1,
-	.vl_hsync_len = 41,
-	.vl_left_margin = 2,
-	.vl_right_margin = 2,
-	.vl_vsync_len = 11,
-	.vl_upper_margin = 2,
-	.vl_lower_margin = 2,
-	.mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void)	{ /* Empty! */ }
-void lcd_disable(void)	{ /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
 {
-	return 1;
-}
-
-static void sama5d4_xplained_lcd_hw_init(void)
-{
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0);	/* LCDPWM */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0);	/* LCDDISP */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0);	/* LCDVSYNC */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0);	/* LCDHSYNC */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0);	/* LCDDOTCK */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0);	/* LCDDEN */
-
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  0, 0);	/* LCDD0 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  1, 0);	/* LCDD1 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  2, 0);	/* LCDD2 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  3, 0);	/* LCDD3 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  4, 0);	/* LCDD4 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  5, 0);	/* LCDD5 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  6, 0);	/* LCDD6 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  7, 0);	/* LCDD7 */
-
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  8, 0);	/* LCDD9 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  9, 0);	/* LCDD8 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* LCDD10 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* LCDD11 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* LCDD12 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* LCDD13 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* LCDD14 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* LCDD15 */
-
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0);	/* LCDD16 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0);	/* LCDD17 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0);	/* LCDD18 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0);	/* LCDD19 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0);	/* LCDD20 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0);	/* LCDD21 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0);	/* LCDD22 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0);	/* LCDD23 */
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
-	ulong dram_size, nand_size;
-	int i;
-	char temp[32];
-
-	lcd_printf("%s\n", U_BOOT_VERSION);
-	lcd_printf("2014 ATMEL Corp\n");
-	lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
-		   strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-
-	nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += get_nand_dev_by_index(i)->size;
+#ifdef CONFIG_DM_VIDEO
+	at91_video_show_board_info();
 #endif
-	lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
-		   dram_size >> 20, nand_size >> 20);
+	return 0;
 }
-#endif /* CONFIG_LCD_INFO */
-
-#endif /* CONFIG_LCD */
+#endif
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 static void sama5d4_xplained_serial3_hw_init(void)
@@ -212,9 +125,6 @@ int board_init(void)
 #ifdef CONFIG_NAND_ATMEL
 	sama5d4_xplained_nand_hw_init();
 #endif
-#ifdef CONFIG_LCD
-	sama5d4_xplained_lcd_hw_init();
-#endif
 #ifdef CONFIG_CMD_USB
 	sama5d4_xplained_usb_hw_init();
 #endif
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c
index ee07038..48c43f0 100644
--- a/board/atmel/sama5d4ek/sama5d4ek.c
+++ b/board/atmel/sama5d4ek/sama5d4ek.c
@@ -14,11 +14,7 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/sama5d3_smc.h>
 #include <asm/arch/sama5d4.h>
-#include <atmel_hlcdc.h>
 #include <debug_uart.h>
-#include <lcd.h>
-#include <nand.h>
-#include <version.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -74,93 +70,15 @@ static void sama5d4ek_usb_hw_init(void)
 }
 #endif
 
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
-	.vl_col = 800,
-	.vl_row = 480,
-	.vl_clk = 33260000,
-	.vl_bpix = LCD_BPP,
-	.vl_tft = 1,
-	.vl_hsync_len = 5,
-	.vl_left_margin = 128,
-	.vl_right_margin = 0,
-	.vl_vsync_len = 5,
-	.vl_upper_margin = 23,
-	.vl_lower_margin = 22,
-	.mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void)	{ /* Empty! */ }
-void lcd_disable(void)	{ /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
 {
-	return 1;
-}
-
-static void sama5d4ek_lcd_hw_init(void)
-{
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0);	/* LCDPWM */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0);	/* LCDDISP */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0);	/* LCDVSYNC */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0);	/* LCDHSYNC */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0);	/* LCDDOTCK */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0);	/* LCDDEN */
-
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  2, 0);	/* LCDD2 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  3, 0);	/* LCDD3 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  4, 0);	/* LCDD4 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  5, 0);	/* LCDD5 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  6, 0);	/* LCDD6 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA,  7, 0);	/* LCDD7 */
-
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* LCDD10 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* LCDD11 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* LCDD12 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* LCDD13 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* LCDD14 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* LCDD15 */
-
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0);	/* LCDD18 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0);	/* LCDD19 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0);	/* LCDD20 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0);	/* LCDD21 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0);	/* LCDD22 */
-	at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0);	/* LCDD23 */
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
-	ulong dram_size, nand_size;
-	int i;
-	char temp[32];
-
-	lcd_printf("%s\n", U_BOOT_VERSION);
-	lcd_printf("2014 ATMEL Corp\n");
-	lcd_printf("at91@atmel.com\n");
-	lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
-		   strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-
-	nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += get_nand_dev_by_index(i)->size;
+#ifdef CONFIG_DM_VIDEO
+	at91_video_show_board_info();
 #endif
-	lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
-		   dram_size >> 20, nand_size >> 20);
+	return 0;
 }
-#endif /* CONFIG_LCD_INFO */
-
-#endif /* CONFIG_LCD */
+#endif
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 static void sama5d4ek_serial3_hw_init(void)
@@ -196,9 +114,6 @@ int board_init(void)
 #ifdef CONFIG_NAND_ATMEL
 	sama5d4ek_nand_hw_init();
 #endif
-#ifdef CONFIG_LCD
-	sama5d4ek_lcd_hw_init();
-#endif
 #ifdef CONFIG_CMD_USB
 	sama5d4ek_usb_hw_init();
 #endif