Merge tag 'v2021.10-rc5' into next

Prepare v2021.10-rc5

8 files changed, 13 insertions, 17 deletions

diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
index bac78af..a48e1f5 100644
--- a/board/CZ.NIC/turris_omnia/turris_omnia.c
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -647,10 +647,13 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 	if (!fixup_mtd_partitions(blob, node, mtd))
 		goto fail;
 
+	put_mtd_device(mtd);
 	return 0;
 
 fail:
 	printf("Failed fixing SPI NOR partitions!\n");
+	if (!IS_ERR_OR_NULL(mtd))
+		put_mtd_device(mtd);
 	return 0;
 }
 #endif
diff --git a/board/LaCie/edminiv2/MAINTAINERS b/board/LaCie/edminiv2/MAINTAINERS
index e0591f4..055afd0 100644
--- a/board/LaCie/edminiv2/MAINTAINERS
+++ b/board/LaCie/edminiv2/MAINTAINERS
@@ -1,5 +1,5 @@
 EDMINIV2 BOARD
-M:	Albert ARIBAUD <albert.u.boot@aribaud.net>
+M:	Simon Guinot <simon.guinot@sequanux.org>
 S:	Maintained
 F:	board/LaCie/edminiv2/
 F:	include/configs/edminiv2.h
diff --git a/board/emulation/common/Makefile b/board/emulation/common/Makefile
index c5b452e..7ed447a 100644
--- a/board/emulation/common/Makefile
+++ b/board/emulation/common/Makefile
@@ -2,3 +2,4 @@
 
 obj-$(CONFIG_SYS_MTDPARTS_RUNTIME) += qemu_mtdparts.o
 obj-$(CONFIG_SET_DFU_ALT_INFO) += qemu_dfu.o
+obj-$(CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT) += qemu_capsule.o
diff --git a/board/ge/b1x5v2/MAINTAINERS b/board/ge/b1x5v2/MAINTAINERS
index f22d492..3196ddb 100644
--- a/board/ge/b1x5v2/MAINTAINERS
+++ b/board/ge/b1x5v2/MAINTAINERS
@@ -1,7 +1,7 @@
 GE B1X5V2 BOARD
 M:	Huan 'Kitty' Wang <HuanWang@ge.com>
 M:	Ian Ray <ian.ray@ge.com>
-M:	Sebastian Reichel <sebastian.reichel@collabora.com>
+M:	Martyn Welch <martyn.welch@collabora.com>
 S:	Maintained
 F:	arch/arm/dts/imx6dl-b1x5v2.dts
 F:	board/ge/b1x5v2/
diff --git a/board/ge/bx50v3/MAINTAINERS b/board/ge/bx50v3/MAINTAINERS
index fafbd78..c165048 100644
--- a/board/ge/bx50v3/MAINTAINERS
+++ b/board/ge/bx50v3/MAINTAINERS
@@ -1,6 +1,6 @@
 GE BX50V3 BOARD
 M:	Ian Ray <ian.ray@ge.com>
-M:	Sebastian Reichel <sebastian.reichel@collabora.com>
+M:	Martyn Welch <martyn.welch@collabora.com>
 S:	Maintained
 F:	arch/arm/dts/imx6q-b450v3.dts
 F:	arch/arm/dts/imx6q-b650v3.dts
diff --git a/board/ge/mx53ppd/MAINTAINERS b/board/ge/mx53ppd/MAINTAINERS
index 2c06c8e..146a460 100644
--- a/board/ge/mx53ppd/MAINTAINERS
+++ b/board/ge/mx53ppd/MAINTAINERS
@@ -1,7 +1,7 @@
 GE PPD BOARD
 M:	Antti Mäentausta <antti.maentausta@ge.com>
 M:	Ian Ray <ian.ray@ge.com>
-M:	Sebastian Reichel <sebastian.reichel@collabora.com>
+M:	Martyn Welch <martyn.welch@collabora.com>
 S:	Maintained
 F:	arch/arm/dts/imx53-ppd*
 F:	board/ge/mx53ppd/
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 74697ba..0c7d58d 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -497,12 +497,11 @@ void *board_fdt_blob_setup(void)
 
 int ft_board_setup(void *blob, struct bd_info *bd)
 {
-	/*
-	 * For now, we simply always add the simplefb DT node. Later, we
-	 * should be more intelligent, and e.g. only do this if no enabled DT
-	 * node exists for the "real" graphics driver.
-	 */
-	lcd_dt_simplefb_add_node(blob);
+	int node;
+
+	node = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer");
+	if (node < 0)
+		lcd_dt_simplefb_add_node(blob);
 
 #ifdef CONFIG_EFI_LOADER
 	/* Reserve the spin table */
diff --git a/board/softing/vining_fpga/socfpga.c b/board/softing/vining_fpga/socfpga.c
index aaedf03..2299227 100644
--- a/board/softing/vining_fpga/socfpga.c
+++ b/board/softing/vining_fpga/socfpga.c
@@ -23,7 +23,6 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 int board_late_init(void)
 {
-	const unsigned int phy_nrst_gpio = 0;
 	const unsigned int usb_nrst_gpio = 35;
 	int ret;
 
@@ -33,12 +32,6 @@ int board_late_init(void)
 	/* Address of boot parameters for ATAG (if ATAG is used) */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-	ret = gpio_request(phy_nrst_gpio, "phy_nrst_gpio");
-	if (!ret)
-		gpio_direction_output(phy_nrst_gpio, 1);
-	else
-		printf("Cannot remove PHY from reset!\n");
-
 	ret = gpio_request(usb_nrst_gpio, "usb_nrst_gpio");
 	if (!ret)
 		gpio_direction_output(usb_nrst_gpio, 1);