diff options
| author | Fabio Estevam <fabio.estevam@nxp.com> | 2018-01-03 12:55:34 -0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2018-01-12 14:28:04 +0100 |
| commit | db00e921fdc6af54492606dd0ebd1f0ab53c7a90 (patch) | |
| tree | bb00fc615e8d4d3119b7184d4b4c1f1a0e4df881 /board | |
| parent | 64c7abf0235a3cb5efc32b6c926b6ff8cc0d1d9b (diff) | |
| download | u-boot-db00e921fdc6af54492606dd0ebd1f0ab53c7a90.zip u-boot-db00e921fdc6af54492606dd0ebd1f0ab53c7a90.tar.gz u-boot-db00e921fdc6af54492606dd0ebd1f0ab53c7a90.tar.bz2 | |
mx6memcal: Fix the UART ports for mx6sabresd/auto boards
mx6sabresd board uses the following pins for console:
PAD_CSI0_DAT10__UART1_TX_DATA
PAD_CSI0_DAT11__UART1_RX_DATA
,so put it in the same config option as wandboard.
mx6sabreauto board uses the following pins for console:
PAD_KEY_COL0__UART4_TX_DATA
PAD_KEY_ROW0__UART4_RX_DATA
So do not mention sabreauto board as part of the UART1_SD3_DAT6_7 option.
The config option for sabreauto can be added later when needed.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Diffstat (limited to 'board')
| -rw-r--r-- | board/freescale/mx6memcal/Kconfig | 12 |
1 files changed, 2 insertions, 10 deletions
diff --git a/board/freescale/mx6memcal/Kconfig b/board/freescale/mx6memcal/Kconfig index 443804d..9987cba 100644 --- a/board/freescale/mx6memcal/Kconfig +++ b/board/freescale/mx6memcal/Kconfig @@ -45,20 +45,12 @@ choice NXP SABRELite. config UART1_CSI0_DAT10_11 - bool "UART1 on CSI0_DAT10/11 (Wand)" + bool "UART1 on CSI0_DAT10/11 (Wand, SabreSD)" depends on SERIAL_CONSOLE_UART1 help Choose this configuration if you're using pads CSI0_DAT10 and DAT11 for a console on UART1 as - is done on the i.MX6 Wand board. - - config UART1_SD3_DAT6_7 - bool "UART1 on SD3_DAT6/7 (SabreSD, SabreAuto)" - depends on SERIAL_CONSOLE_UART1 - help - Choose this configuration if you're using pads - SD3_DAT6 and DAT7 for a console on UART1 as is - done on the NXP SABRESD or SABREAUTO designs. + is done on the i.MX6 Wand board and i.MX6 SabreSD. config UART1_UART1 bool "UART1 on UART1 (i.MX6SL EVK, WaRP)" |