sh: Remove sh7752evb board

This board has not been converted to CONFIG_DM by the deadline of v2020.01
and is missing other conversions which depend on this as well.  Remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>

6 files changed, 0 insertions, 899 deletions

diff --git a/board/renesas/sh7752evb/Kconfig b/board/renesas/sh7752evb/Kconfig
deleted file mode 100644
index 7f40888..0000000
--- a/board/renesas/sh7752evb/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_SH7752EVB
-
-config SYS_BOARD
-	default "sh7752evb"
-
-config SYS_VENDOR
-	default "renesas"
-
-config SYS_CONFIG_NAME
-	default "sh7752evb"
-
-endif
diff --git a/board/renesas/sh7752evb/MAINTAINERS b/board/renesas/sh7752evb/MAINTAINERS
deleted file mode 100644
index 9840477..0000000
--- a/board/renesas/sh7752evb/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SH7752EVB BOARD
-#M:	-
-S:	Maintained
-F:	board/renesas/sh7752evb/
-F:	include/configs/sh7752evb.h
-F:	configs/sh7752evb_defconfig
diff --git a/board/renesas/sh7752evb/Makefile b/board/renesas/sh7752evb/Makefile
deleted file mode 100644
index 658dc3b..0000000
--- a/board/renesas/sh7752evb/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2012  Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
-#
-
-obj-y	:= sh7752evb.o spi-boot.o
-extra-y	+= lowlevel_init.o
diff --git a/board/renesas/sh7752evb/lowlevel_init.S b/board/renesas/sh7752evb/lowlevel_init.S
deleted file mode 100644
index 0f7b643..0000000
--- a/board/renesas/sh7752evb/lowlevel_init.S
+++ /dev/null
@@ -1,445 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2012  Renesas Solutions Corp.
- */
-
-#include <config.h>
-#include <asm/processor.h>
-#include <asm/macro.h>
-
-.macro	or32, addr, data
-	mov.l \addr, r1
-	mov.l \data, r0
-	mov.l @r1, r2
-	or    r2, r0
-	mov.l r0, @r1
-.endm
-
-.macro	wait_DBCMD
-	mov.l	DBWAIT_A, r0
-	mov.l	@r0, r1
-.endm
-
-	.global lowlevel_init
-	.section	.spiboot1.text
-	.align  2
-
-lowlevel_init:
-	/*------- GPIO -------*/
-	write16 PDCR_A,	PDCR_D		! SPI0
-	write16 PGCR_A,	PGCR_D		! SPI0, GETHER MDIO gate(PTG1)
-	write16 PJCR_A,	PJCR_D		! SCIF4
-	write16 PTCR_A,	PTCR_D		! STATUS
-	write16 PSEL1_A, PSEL1_D	! SPI0
-	write16 PSEL2_A, PSEL2_D	! SPI0
-	write16 PSEL5_A, PSEL5_D	! STATUS
-
-	bra	exit_gpio
-	nop
-
-	.align	2
-
-/*------- GPIO -------*/
-PDCR_A:		.long	0xffec0006
-PGCR_A:		.long	0xffec000c
-PJCR_A:		.long	0xffec0012
-PTCR_A:		.long	0xffec0026
-PSEL1_A:	.long	0xffec0072
-PSEL2_A:	.long	0xffec0074
-PSEL5_A:	.long	0xffec007a
-
-PDCR_D:		.long	0x0000
-PGCR_D:		.long	0x0004
-PJCR_D:		.long	0x0000
-PTCR_D:		.long	0x0000
-PSEL1_D:	.long	0x0000
-PSEL2_D:	.long	0x3000
-PSEL5_D:	.long	0x0ffc
-
-	.align	2
-
-exit_gpio:
-	mov	#0, r14
-	mova	2f, r0
-	mov.l	PC_MASK, r1
-	tst	r0, r1
-	bf	2f
-
-	bra	exit_pmb
-	nop
-
-	.align	2
-
-/* If CPU runs on SDRAM (PC=0x5???????) or not. */
-PC_MASK:	.long	0x20000000
-
-2:
-	mov	#1, r14
-
-	mov.l	EXPEVT_A, r0
-	mov.l	@r0, r0
-	mov.l	EXPEVT_POWER_ON_RESET, r1
-	cmp/eq	r0, r1
-	bt	1f
-
-	/*
-	 * If EXPEVT value is manual reset or tlb multipul-hit,
-	 * initialization of DDR3IF is not necessary.
-	 */
-	bra	exit_ddr
-	nop
-
-1:
-	/*------- Reset -------*/
-	write32 MRSTCR0_A, MRSTCR0_D
-	write32 MRSTCR1_A, MRSTCR1_D
-
-	/* For Core Reset */
-	mov.l	DBACEN_A, r0
-	mov.l	@r0, r0
-	cmp/eq	#0, r0
-	bt	3f
-
-	/*
-	 * If DBACEN == 1(DBSC was already enabled), we have to avoid the
-	 * initialization of DDR3-SDRAM.
-	 */
-	bra	exit_ddr
-	nop
-
-3:
-	/*------- DDR3IF -------*/
-	/* oscillation stabilization time */
-	wait_timer	WAIT_OSC_TIME
-
-	/* step 3 */
-	write32 DBCMD_A, DBCMD_RSTL_VAL
-	wait_timer	WAIT_30US
-
-	/* step 4 */
-	write32 DBCMD_A, DBCMD_PDEN_VAL
-
-	/* step 5 */
-	write32 DBKIND_A, DBKIND_D
-
-	/* step 6 */
-	write32 DBCONF_A, DBCONF_D
-	write32 DBTR0_A, DBTR0_D
-	write32 DBTR1_A, DBTR1_D
-	write32 DBTR2_A, DBTR2_D
-	write32 DBTR3_A, DBTR3_D
-	write32 DBTR4_A, DBTR4_D
-	write32 DBTR5_A, DBTR5_D
-	write32 DBTR6_A, DBTR6_D
-	write32 DBTR7_A, DBTR7_D
-	write32 DBTR8_A, DBTR8_D
-	write32 DBTR9_A, DBTR9_D
-	write32 DBTR10_A, DBTR10_D
-	write32 DBTR11_A, DBTR11_D
-	write32 DBTR12_A, DBTR12_D
-	write32 DBTR13_A, DBTR13_D
-	write32 DBTR14_A, DBTR14_D
-	write32 DBTR15_A, DBTR15_D
-	write32 DBTR16_A, DBTR16_D
-	write32 DBTR17_A, DBTR17_D
-	write32 DBTR18_A, DBTR18_D
-	write32 DBTR19_A, DBTR19_D
-	write32 DBRNK0_A, DBRNK0_D
-
-	/* step 7 */
-	write32 DBPDCNT3_A, DBPDCNT3_D
-
-	/* step 8 */
-	write32 DBPDCNT1_A, DBPDCNT1_D
-	write32 DBPDCNT2_A, DBPDCNT2_D
-	write32 DBPDLCK_A, DBPDLCK_D
-	write32 DBPDRGA_A, DBPDRGA_D
-	write32 DBPDRGD_A, DBPDRGD_D
-
-	/* step 9 */
-	wait_timer	WAIT_30US
-
-	/* step 10 */
-	write32 DBPDCNT0_A, DBPDCNT0_D
-
-	/* step 11 */
-	wait_timer	WAIT_30US
-	wait_timer	WAIT_30US
-
-	/* step 12 */
-	write32 DBCMD_A, DBCMD_WAIT_VAL
-	wait_DBCMD
-
-	/* step 13 */
-	write32 DBCMD_A, DBCMD_RSTH_VAL
-	wait_DBCMD
-
-	/* step 14 */
-	write32 DBCMD_A, DBCMD_WAIT_VAL
-	write32 DBCMD_A, DBCMD_WAIT_VAL
-	write32 DBCMD_A, DBCMD_WAIT_VAL
-	write32 DBCMD_A, DBCMD_WAIT_VAL
-
-	/* step 15 */
-	write32 DBCMD_A, DBCMD_PDXT_VAL
-
-	/* step 16 */
-	write32 DBCMD_A, DBCMD_MRS2_VAL
-
-	/* step 17 */
-	write32 DBCMD_A, DBCMD_MRS3_VAL
-
-	/* step 18 */
-	write32 DBCMD_A, DBCMD_MRS1_VAL
-
-	/* step 19 */
-	write32 DBCMD_A, DBCMD_MRS0_VAL
-
-	/* step 20 */
-	write32 DBCMD_A, DBCMD_ZQCL_VAL
-
-	write32 DBCMD_A, DBCMD_REF_VAL
-	write32 DBCMD_A, DBCMD_REF_VAL
-	wait_DBCMD
-
-	/* step 21 */
-	write32 DBADJ0_A, DBADJ0_D
-	write32 DBADJ1_A, DBADJ1_D
-	write32 DBADJ2_A, DBADJ2_D
-
-	/* step 22 */
-	write32 DBRFCNF0_A, DBRFCNF0_D
-	write32 DBRFCNF1_A, DBRFCNF1_D
-	write32 DBRFCNF2_A, DBRFCNF2_D
-
-	/* step 23 */
-	write32 DBCALCNF_A, DBCALCNF_D
-
-	/* step 24 */
-	write32 DBRFEN_A, DBRFEN_D
-	write32 DBCMD_A, DBCMD_SRXT_VAL
-
-	/* step 25 */
-	write32 DBACEN_A, DBACEN_D
-
-	/* step 26 */
-	wait_DBCMD
-
-	bra	exit_ddr
-	nop
-
-	.align 2
-
-EXPEVT_A:		.long	0xff000024
-EXPEVT_POWER_ON_RESET:	.long	0x00000000
-
-/*------- Reset -------*/
-MRSTCR0_A:	.long	0xffd50030
-MRSTCR0_D:	.long	0xfe1ffe7f
-MRSTCR1_A:	.long	0xffd50034
-MRSTCR1_D:	.long	0xfff3ffff
-
-/*------- DDR3IF -------*/
-DBCMD_A:	.long	0xfe800018
-DBKIND_A:	.long	0xfe800020
-DBCONF_A:	.long	0xfe800024
-DBTR0_A:	.long	0xfe800040
-DBTR1_A:	.long	0xfe800044
-DBTR2_A:	.long	0xfe800048
-DBTR3_A:	.long	0xfe800050
-DBTR4_A:	.long	0xfe800054
-DBTR5_A:	.long	0xfe800058
-DBTR6_A:	.long	0xfe80005c
-DBTR7_A:	.long	0xfe800060
-DBTR8_A:	.long	0xfe800064
-DBTR9_A:	.long	0xfe800068
-DBTR10_A:	.long	0xfe80006c
-DBTR11_A:	.long	0xfe800070
-DBTR12_A:	.long	0xfe800074
-DBTR13_A:	.long	0xfe800078
-DBTR14_A:	.long	0xfe80007c
-DBTR15_A:	.long	0xfe800080
-DBTR16_A:	.long	0xfe800084
-DBTR17_A:	.long	0xfe800088
-DBTR18_A:	.long	0xfe80008c
-DBTR19_A:	.long	0xfe800090
-DBRNK0_A:	.long	0xfe800100
-DBPDCNT0_A:	.long	0xfe800200
-DBPDCNT1_A:	.long	0xfe800204
-DBPDCNT2_A:	.long	0xfe800208
-DBPDCNT3_A:	.long	0xfe80020c
-DBPDLCK_A:	.long	0xfe800280
-DBPDRGA_A:	.long	0xfe800290
-DBPDRGD_A:	.long	0xfe8002a0
-DBADJ0_A:	.long	0xfe8000c0
-DBADJ1_A:	.long	0xfe8000c4
-DBADJ2_A:	.long	0xfe8000c8
-DBRFCNF0_A:	.long	0xfe8000e0
-DBRFCNF1_A:	.long	0xfe8000e4
-DBRFCNF2_A:	.long	0xfe8000e8
-DBCALCNF_A:	.long	0xfe8000f4
-DBRFEN_A:	.long	0xfe800014
-DBACEN_A:	.long	0xfe800010
-DBWAIT_A:	.long	0xfe80001c
-
-WAIT_OSC_TIME:	.long	6000
-WAIT_30US:	.long	13333
-
-DBCMD_RSTL_VAL:	.long	0x20000000
-DBCMD_PDEN_VAL:	.long	0x1000d73c
-DBCMD_WAIT_VAL:	.long	0x0000d73c
-DBCMD_RSTH_VAL:	.long	0x2100d73c
-DBCMD_PDXT_VAL:	.long	0x110000c8
-DBCMD_MRS0_VAL:	.long	0x28000930
-DBCMD_MRS1_VAL:	.long	0x29000004
-DBCMD_MRS2_VAL:	.long	0x2a000008
-DBCMD_MRS3_VAL:	.long	0x2b000000
-DBCMD_ZQCL_VAL:	.long	0x03000200
-DBCMD_REF_VAL:	.long	0x0c000000
-DBCMD_SRXT_VAL:	.long	0x19000000
-DBKIND_D:	.long	0x00000007
-DBCONF_D:	.long	0x0f030a01
-DBTR0_D:	.long	0x00000007
-DBTR1_D:	.long	0x00000006
-DBTR2_D:	.long	0x00000000
-DBTR3_D:	.long	0x00000007
-DBTR4_D:	.long	0x00070007
-DBTR5_D:	.long	0x0000001b
-DBTR6_D:	.long	0x00000014
-DBTR7_D:	.long	0x00000005
-DBTR8_D:	.long	0x00000015
-DBTR9_D:	.long	0x00000006
-DBTR10_D:	.long	0x00000008
-DBTR11_D:	.long	0x00000007
-DBTR12_D:	.long	0x0000000e
-DBTR13_D:	.long	0x00000056
-DBTR14_D:	.long	0x00000006
-DBTR15_D:	.long	0x00000004
-DBTR16_D:	.long	0x00150002
-DBTR17_D:	.long	0x000c0017
-DBTR18_D:	.long	0x00000200
-DBTR19_D:	.long	0x00000040
-DBRNK0_D:	.long	0x00000001
-DBPDCNT0_D:	.long	0x00000001
-DBPDCNT1_D:	.long	0x00000001
-DBPDCNT2_D:	.long	0x00000000
-DBPDCNT3_D:	.long	0x00004010
-DBPDLCK_D:	.long	0x0000a55a
-DBPDRGA_D:	.long	0x00000028
-DBPDRGD_D:	.long	0x00017100
-
-DBADJ0_D:	.long	0x00000000
-DBADJ1_D:	.long	0x00000000
-DBADJ2_D:	.long	0x18061806
-DBRFCNF0_D:	.long	0x000001ff
-DBRFCNF1_D:	.long	0x08001000
-DBRFCNF2_D:	.long	0x00000000
-DBCALCNF_D:	.long	0x0000ffff
-DBRFEN_D:	.long	0x00000001
-DBACEN_D:	.long	0x00000001
-
-	.align 2
-exit_ddr:
-#if defined(CONFIG_SH_32BIT)
-	/*------- set PMB -------*/
-	write32	PASCR_A,	PASCR_29BIT_D
-	write32	MMUCR_A,	MMUCR_D
-
-	/*****************************************************************
-	 * ent	virt		phys		v	sz	c	wt
-	 * 0	0xa0000000	0x00000000	1	128M	0	1
-	 * 1	0xa8000000	0x48000000	1	128M	0	1
-	 * 5	0x88000000	0x48000000	1	128M	1	1
-	 */
-	write32	PMB_ADDR_SPIBOOT_A,	PMB_ADDR_SPIBOOT_D
-	write32	PMB_DATA_SPIBOOT_A,	PMB_DATA_SPIBOOT_D
-	write32	PMB_ADDR_DDR_C1_A,	PMB_ADDR_DDR_C1_D
-	write32	PMB_DATA_DDR_C1_A,	PMB_DATA_DDR_C1_D
-	write32	PMB_ADDR_DDR_N1_A,	PMB_ADDR_DDR_N1_D
-	write32	PMB_DATA_DDR_N1_A,	PMB_DATA_DDR_N1_D
-
-	write32	PMB_ADDR_ENTRY2,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY3,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY4,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY6,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY7,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY8,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY9,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY10,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY11,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY12,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY13,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY14,	PMB_ADDR_NOT_USE_D
-	write32	PMB_ADDR_ENTRY15,	PMB_ADDR_NOT_USE_D
-
-	write32	PASCR_A,	PASCR_INIT
-	mov.l	DUMMY_ADDR, r0
-	icbi	@r0
-#endif	/* if defined(CONFIG_SH_32BIT) */
-
-exit_pmb:
-	/* CPU is running on ILRAM? */
-	mov	r14, r0
-	tst	#1, r0
-	bt	1f
-
-	mov.l	_stack_ilram, r15
-	mov.l	_spiboot_main, r0
-100:	bsrf	r0
-	nop
-
-	.align	2
-_spiboot_main:	.long	(spiboot_main - (100b + 4))
-_stack_ilram:	.long	0xe5204000
-
-1:
-	write32	CCR_A,	CCR_D
-
-	rts
-	 nop
-
-	.align 2
-
-#if defined(CONFIG_SH_32BIT)
-/*------- set PMB -------*/
-PMB_ADDR_SPIBOOT_A:	.long	PMB_ADDR_BASE(0)
-PMB_ADDR_DDR_N1_A:	.long	PMB_ADDR_BASE(1)
-PMB_ADDR_DDR_C1_A:	.long	PMB_ADDR_BASE(5)
-PMB_ADDR_ENTRY2:	.long	PMB_ADDR_BASE(2)
-PMB_ADDR_ENTRY3:	.long	PMB_ADDR_BASE(3)
-PMB_ADDR_ENTRY4:	.long	PMB_ADDR_BASE(4)
-PMB_ADDR_ENTRY6:	.long	PMB_ADDR_BASE(6)
-PMB_ADDR_ENTRY7:	.long	PMB_ADDR_BASE(7)
-PMB_ADDR_ENTRY8:	.long	PMB_ADDR_BASE(8)
-PMB_ADDR_ENTRY9:	.long	PMB_ADDR_BASE(9)
-PMB_ADDR_ENTRY10:	.long	PMB_ADDR_BASE(10)
-PMB_ADDR_ENTRY11:	.long	PMB_ADDR_BASE(11)
-PMB_ADDR_ENTRY12:	.long	PMB_ADDR_BASE(12)
-PMB_ADDR_ENTRY13:	.long	PMB_ADDR_BASE(13)
-PMB_ADDR_ENTRY14:	.long	PMB_ADDR_BASE(14)
-PMB_ADDR_ENTRY15:	.long	PMB_ADDR_BASE(15)
-
-PMB_ADDR_SPIBOOT_D:	.long	mk_pmb_addr_val(0xa0)
-PMB_ADDR_DDR_C1_D:	.long	mk_pmb_addr_val(0x88)
-PMB_ADDR_DDR_N1_D:	.long	mk_pmb_addr_val(0xa8)
-PMB_ADDR_NOT_USE_D:	.long	0x00000000
-
-PMB_DATA_SPIBOOT_A:	.long	PMB_DATA_BASE(0)
-PMB_DATA_DDR_N1_A:	.long	PMB_DATA_BASE(1)
-PMB_DATA_DDR_C1_A:	.long	PMB_DATA_BASE(5)
-
-/*						ppn   ub v s1 s0  c  wt */
-PMB_DATA_SPIBOOT_D:	.long	mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1)
-PMB_DATA_DDR_C1_D:	.long	mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1)
-PMB_DATA_DDR_N1_D:	.long	mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1)
-
-PASCR_A:		.long	0xff000070
-DUMMY_ADDR:		.long	0xa0000000
-PASCR_29BIT_D:		.long	0x00000000
-PASCR_INIT:		.long	0x80000080
-MMUCR_A:		.long	0xff000010
-MMUCR_D:		.long	0x00000004	/* clear ITLB */
-#endif	/* CONFIG_SH_32BIT */
-
-CCR_A:		.long	CCR
-CCR_D:		.long	CCR_CACHE_INIT
diff --git a/board/renesas/sh7752evb/sh7752evb.c b/board/renesas/sh7752evb/sh7752evb.c
deleted file mode 100644
index 522b4bd..0000000
--- a/board/renesas/sh7752evb/sh7752evb.c
+++ /dev/null
@@ -1,313 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012  Renesas Solutions Corp.
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <flash.h>
-#include <init.h>
-#include <malloc.h>
-#include <net.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmc.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include <linux/delay.h>
-
-int checkboard(void)
-{
-	puts("BOARD: SH7752 evaluation board (R0P7752C00000RZ)\n");
-
-	return 0;
-}
-
-static void init_gpio(void)
-{
-	struct gpio_regs *gpio = GPIO_BASE;
-	struct sermux_regs *sermux = SERMUX_BASE;
-
-	/* GPIO */
-	writew(0x0000, &gpio->pacr);	/* GETHER */
-	writew(0x0001, &gpio->pbcr);	/* INTC */
-	writew(0x0000, &gpio->pccr);	/* PWMU, INTC */
-	writew(0xeaff, &gpio->pecr);	/* GPIO */
-	writew(0x0000, &gpio->pfcr);	/* WDT */
-	writew(0x0000, &gpio->phcr);	/* SPI1 */
-	writew(0x0000, &gpio->picr);	/* SDHI */
-	writew(0x0003, &gpio->pkcr);	/* SerMux */
-	writew(0x0000, &gpio->plcr);	/* SerMux */
-	writew(0x0000, &gpio->pmcr);	/* RIIC */
-	writew(0x0000, &gpio->pncr);	/* USB, SGPIO */
-	writew(0x0000, &gpio->pocr);	/* SGPIO */
-	writew(0xd555, &gpio->pqcr);	/* GPIO */
-	writew(0x0000, &gpio->prcr);	/* RIIC */
-	writew(0x0000, &gpio->pscr);	/* RIIC */
-	writeb(0x00, &gpio->pudr);
-	writew(0x5555, &gpio->pucr);	/* Debug LED */
-	writew(0x0000, &gpio->pvcr);	/* RSPI */
-	writew(0x0000, &gpio->pwcr);	/* EVC */
-	writew(0x0000, &gpio->pxcr);	/* LBSC */
-	writew(0x0000, &gpio->pycr);	/* LBSC */
-	writew(0x0000, &gpio->pzcr);	/* eMMC */
-	writew(0xfe00, &gpio->psel0);
-	writew(0xff00, &gpio->psel3);
-	writew(0x771f, &gpio->psel4);
-	writew(0x00ff, &gpio->psel6);
-	writew(0xfc00, &gpio->psel7);
-
-	writeb(0x10, &sermux->smr0);	/* SMR0: SerMux mode 0 */
-}
-
-static void init_usb_phy(void)
-{
-	struct usb_common_regs *common0 = USB0_COMMON_BASE;
-	struct usb_common_regs *common1 = USB1_COMMON_BASE;
-	struct usb0_phy_regs *phy = USB0_PHY_BASE;
-	struct usb1_port_regs *port = USB1_PORT_BASE;
-	struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;
-
-	writew(0x0100, &phy->reset);		/* set reset */
-	/* port0 = USB0, port1 = USB1 */
-	writew(0x0002, &phy->portsel);
-	writel(0x0001, &port->port1sel);	/* port1 = Host */
-	writew(0x0111, &phy->reset);		/* clear reset */
-
-	writew(0x4000, &common0->suspmode);
-	writew(0x4000, &common1->suspmode);
-
-#if defined(__LITTLE_ENDIAN)
-	writel(0x00000000, &align->ehcidatac);
-	writel(0x00000000, &align->ohcidatac);
-#endif
-}
-
-static void init_gether_mdio(void)
-{
-	struct gpio_regs *gpio = GPIO_BASE;
-
-	writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr);
-	writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr);	/* Use ET0-MDIO */
-}
-
-static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
-{
-	struct ether_mac_regs *ether;
-	unsigned char mac[6];
-	unsigned long val;
-
-	string_to_enetaddr(mac_string, mac);
-
-	if (!channel)
-		ether = GETHER0_MAC_BASE;
-	else
-		ether = GETHER1_MAC_BASE;
-
-	val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
-	writel(val, &ether->mahr);
-	val = (mac[4] << 8) | mac[5];
-	writel(val, &ether->malr);
-}
-
-/*****************************************************************
- * This PMB must be set on this timing. The lowlevel_init is run on
- * Area 0(phys 0x00000000), so we have to map it.
- *
- * The new PMB table is following:
- * ent	virt		phys		v	sz	c	wt
- * 0	0xa0000000	0x40000000	1	128M	0	1
- * 1	0xa8000000	0x48000000	1	128M	0	1
- * 2	0xb0000000	0x50000000	1	128M	0	1
- * 3	0xb8000000	0x58000000	1	128M	0	1
- * 4	0x80000000	0x40000000	1	128M	1	1
- * 5	0x88000000	0x48000000	1	128M	1	1
- * 6	0x90000000	0x50000000	1	128M	1	1
- * 7	0x98000000	0x58000000	1	128M	1	1
- */
-static void set_pmb_on_board_init(void)
-{
-	struct mmu_regs *mmu = MMU_BASE;
-
-	/* clear ITLB */
-	writel(0x00000004, &mmu->mmucr);
-
-	/* delete PMB for SPIBOOT */
-	writel(0, PMB_ADDR_BASE(0));
-	writel(0, PMB_DATA_BASE(0));
-
-	/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
-	/*			ppn  ub v s1 s0  c  wt */
-	writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
-	writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
-	writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
-	writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
-	writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
-	writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
-	writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
-	writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
-	writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
-	writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
-	writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
-	writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
-}
-
-int board_init(void)
-{
-	init_gpio();
-	set_pmb_on_board_init();
-
-	init_usb_phy();
-	init_gether_mdio();
-
-	return 0;
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
-	struct gpio_regs *gpio = GPIO_BASE;
-
-	writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr);
-	writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */
-	udelay(1);
-	writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr);	/* Release reset */
-	udelay(200);
-
-	return mmcif_mmc_init();
-}
-
-static int get_sh_eth_mac_raw(unsigned char *buf, int size)
-{
-#ifdef CONFIG_DEPRECATED
-	struct spi_flash *spi;
-	int ret;
-
-	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
-	if (spi == NULL) {
-		printf("%s: spi_flash probe failed.\n", __func__);
-		return 1;
-	}
-
-	ret = spi_flash_read(spi, SH7752EVB_ETHERNET_MAC_BASE, size, buf);
-	if (ret) {
-		printf("%s: spi_flash read failed.\n", __func__);
-		spi_flash_free(spi);
-		return 1;
-	}
-	spi_flash_free(spi);
-#endif
-
-	return 0;
-}
-
-static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
-{
-	memcpy(mac_string, &buf[channel * (SH7752EVB_ETHERNET_MAC_SIZE + 1)],
-		SH7752EVB_ETHERNET_MAC_SIZE);
-	mac_string[SH7752EVB_ETHERNET_MAC_SIZE] = 0x00;	/* terminate */
-
-	return 0;
-}
-
-static void init_ethernet_mac(void)
-{
-	char mac_string[64];
-	char env_string[64];
-	int i;
-	unsigned char *buf;
-
-	buf = malloc(256);
-	if (!buf) {
-		printf("%s: malloc failed.\n", __func__);
-		return;
-	}
-	get_sh_eth_mac_raw(buf, 256);
-
-	/* Gigabit Ethernet */
-	for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) {
-		get_sh_eth_mac(i, mac_string, buf);
-		if (i == 0)
-			env_set("ethaddr", mac_string);
-		else {
-			sprintf(env_string, "eth%daddr", i);
-			env_set(env_string, mac_string);
-		}
-		set_mac_to_sh_giga_eth_register(i, mac_string);
-	}
-
-	free(buf);
-}
-
-int board_late_init(void)
-{
-	init_ethernet_mac();
-
-	return 0;
-}
-
-#ifdef CONFIG_DEPRECATED
-int do_write_mac(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
-	int i, ret;
-	char mac_string[256];
-	struct spi_flash *spi;
-	unsigned char *buf;
-
-	if (argc != 3) {
-		buf = malloc(256);
-		if (!buf) {
-			printf("%s: malloc failed.\n", __func__);
-			return 1;
-		}
-
-		get_sh_eth_mac_raw(buf, 256);
-
-		/* print current MAC address */
-		for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) {
-			get_sh_eth_mac(i, mac_string, buf);
-			printf("GETHERC ch%d = %s\n", i, mac_string);
-		}
-		free(buf);
-		return 0;
-	}
-
-	/* new setting */
-	memset(mac_string, 0xff, sizeof(mac_string));
-	sprintf(mac_string, "%s\t%s",
-		argv[1], argv[2]);
-
-	/* write MAC data to SPI rom */
-	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
-	if (!spi) {
-		printf("%s: spi_flash probe failed.\n", __func__);
-		return 1;
-	}
-
-	ret = spi_flash_erase(spi, SH7752EVB_ETHERNET_MAC_BASE_SPI,
-				SH7752EVB_SPI_SECTOR_SIZE);
-	if (ret) {
-		printf("%s: spi_flash erase failed.\n", __func__);
-		return 1;
-	}
-
-	ret = spi_flash_write(spi, SH7752EVB_ETHERNET_MAC_BASE_SPI,
-				sizeof(mac_string), mac_string);
-	if (ret) {
-		printf("%s: spi_flash write failed.\n", __func__);
-		spi_flash_free(spi);
-		return 1;
-	}
-	spi_flash_free(spi);
-
-	puts("The writing of the MAC address to SPI ROM was completed.\n");
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	write_mac,	3,	1,	do_write_mac,
-	"write MAC address for GETHERC",
-	"[GETHERC ch0] [GETHERC ch1]\n"
-);
-#endif
diff --git a/board/renesas/sh7752evb/spi-boot.c b/board/renesas/sh7752evb/spi-boot.c
deleted file mode 100644
index 91565d4..0000000
--- a/board/renesas/sh7752evb/spi-boot.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright (C) 2012  Renesas Solutions Corp.
- *
- * This file is subject to the terms and conditions of the GNU Lesser
- * General Public License.  See the file "COPYING.LIB" in the main
- * directory of this archive for more details.
- */
-
-#include <common.h>
-
-#define CONFIG_RAM_BOOT_PHYS	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SPI_ADDR		0x00000000
-#define CONFIG_SPI_LENGTH	CONFIG_SYS_MONITOR_LEN
-#define CONFIG_RAM_BOOT		CONFIG_SYS_TEXT_BASE
-
-#define SPIWDMADR	0xFE001018
-#define SPIWDMCNTR	0xFE001020
-#define SPIDMCOR	0xFE001028
-#define SPIDMINTSR	0xFE001188
-#define SPIDMINTMR	0xFE001190
-
-#define SPIDMINTSR_DMEND	0x00000004
-
-#define TBR	0xFE002000
-#define RBR	0xFE002000
-
-#define CR1	0xFE002008
-#define CR2	0xFE002010
-#define CR3	0xFE002018
-#define CR4	0xFE002020
-
-/* CR1 */
-#define SPI_TBE		0x80
-#define SPI_TBF		0x40
-#define SPI_RBE		0x20
-#define SPI_RBF		0x10
-#define SPI_PFONRD	0x08
-#define SPI_SSDB	0x04
-#define SPI_SSD		0x02
-#define SPI_SSA		0x01
-
-/* CR2 */
-#define SPI_RSTF	0x80
-#define SPI_LOOPBK	0x40
-#define SPI_CPOL	0x20
-#define SPI_CPHA	0x10
-#define SPI_L1M0	0x08
-
-/* CR4 */
-#define SPI_TBEI	0x80
-#define SPI_TBFI	0x40
-#define SPI_RBEI	0x20
-#define SPI_RBFI	0x10
-#define SPI_SpiS0	0x02
-#define SPI_SSS		0x01
-
-#define spi_write(val, addr)	(*(volatile unsigned long *)(addr)) = val
-#define spi_read(addr)		(*(volatile unsigned long *)(addr))
-
-/* M25P80 */
-#define M25_READ	0x03
-
-#define __uses_spiboot2	__attribute__((section(".spiboot2.text")))
-static void __uses_spiboot2 spi_reset(void)
-{
-	int timeout = 0x00100000;
-
-	/* Make sure the last transaction is finalized */
-	spi_write(0x00, CR3);
-	spi_write(0x02, CR1);
-	while (!(spi_read(CR4) & SPI_SpiS0)) {
-		if (timeout-- < 0)
-			break;
-	}
-	spi_write(0x00, CR1);
-
-	spi_write(spi_read(CR2) | SPI_RSTF, CR2);	/* fifo reset */
-	spi_write(spi_read(CR2) & ~SPI_RSTF, CR2);
-
-	spi_write(0, SPIDMCOR);
-}
-
-static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr,
-					   unsigned long len)
-{
-	spi_write(M25_READ, TBR);
-	spi_write((addr >> 16) & 0xFF, TBR);
-	spi_write((addr >> 8) & 0xFF, TBR);
-	spi_write(addr & 0xFF, TBR);
-
-	spi_write(SPIDMINTSR_DMEND, SPIDMINTSR);
-	spi_write((unsigned long)buf, SPIWDMADR);
-	spi_write(len & 0xFFFFFFE0, SPIWDMCNTR);
-	spi_write(1, SPIDMCOR);
-
-	spi_write(0xff, CR3);
-	spi_write(spi_read(CR1) | SPI_SSDB, CR1);
-	spi_write(spi_read(CR1) | SPI_SSA, CR1);
-
-	while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND))
-		;
-
-	/* Nagate SP0-SS0 */
-	spi_write(0, CR1);
-}
-
-void __uses_spiboot2 spiboot_main(void)
-{
-	void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE;
-
-	spi_reset();
-	spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR,
-			CONFIG_SPI_LENGTH);
-
-	_start();
-}