Merge tag 'u-boot-amlogic-20191018' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- document alternative libretech-cc installation methods, including upstream TF-A and opensource tools
- add HDMI/CVBS display support for Amlogic G12A SoCs and SEI510 board
- add support for Amlogic A311D based Khadas VIM3
- add support for Amlogic S905X3 based SEI610 board, targeting Android support like SEI510

7 files changed, 328 insertions, 4 deletions

diff --git a/board/amlogic/p212/README.libretech-cc b/board/amlogic/p212/README.libretech-cc
index d007f58..6af7de3 100644
--- a/board/amlogic/p212/README.libretech-cc
+++ b/board/amlogic/p212/README.libretech-cc
@@ -38,9 +38,28 @@ U-Boot compilation
 Image creation
 ==============
 
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+To boot the system, u-boot must be combined with several earlier stage
+bootloaders:
+
+* bl2.bin: vendor-provided binary blob
+* bl21.bin: built from vendor u-boot source
+* bl30.bin: vendor-provided binary blob
+* bl301.bin: built from vendor u-boot source
+* bl31.bin: vendor-provided binary blob
+* acs.bin: built from vendor u-boot source
+
+These binaries and the tools required below have been collected and prebuilt
+for convenience at <https://github.com/BayLibre/u-boot/releases/>
+
+Download and extract the libretech-cc release from there, and set FIPDIR to
+point to the `fip` subdirectory.
+
+ > export FIPDIR=/path/to/extracted/fip
+
+Alternatively, you can obtain the original vendor u-boot tree which
+contains the required blobs and sources, and build yourself.
+Note that old compilers are required for this to build. The compilers here
+are suggested by Amlogic, and they are 32-bit x86 binaries.
 
  > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
  > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
@@ -53,7 +72,10 @@ the git tree published by the board vendor:
  > make
  > export FIPDIR=$PWD/fip
 
-Go back to mainline U-Boot source tree then :
+Once you have the binaries available (either through the prebuilt download,
+or having built the vendor u-boot yourself), you can then proceed to glue
+everything together. Go back to mainline U-Boot source tree then :
+
  > mkdir fip
 
  > cp $FIPDIR/gxl/bl2.bin fip/
@@ -100,3 +122,14 @@ and then write the image to SD with:
  > DEV=/dev/your_sd_device
  > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
  > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+
+Note that Amlogic provides aml_encrypt_gxl as a 32-bit x86 binary with no
+source code. Should you prefer to avoid that, there are open source reverse
+engineered versions available:
+
+1. gxlimg <https://github.com/repk/gxlimg>, which comes with a handy
+   Makefile that automates the whole process.
+2. meson-tools <https://github.com/afaerber/meson-tools>
+
+However, these community-developed alternatives are not endorsed by or
+supported by Amlogic.
diff --git a/board/amlogic/sei610/MAINTAINERS b/board/amlogic/sei610/MAINTAINERS
new file mode 100644
index 0000000..da77aaf
--- /dev/null
+++ b/board/amlogic/sei610/MAINTAINERS
@@ -0,0 +1,7 @@
+SEI610
+M:	Neil Armstrong <narmstrong@baylibre.com>
+S:	Maintained
+L:	u-boot-amlogic@groups.io
+F:	board/amlogic/sei610/
+F:	configs/sei610_defconfig
+F:	include/configs/sei610.h
diff --git a/board/amlogic/sei610/Makefile b/board/amlogic/sei610/Makefile
new file mode 100644
index 0000000..428792a
--- /dev/null
+++ b/board/amlogic/sei610/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 BayLibre, SAS
+# Author: Neil Armstrong <narmstrong@baylibre.com>
+
+obj-y	:= sei610.o
diff --git a/board/amlogic/sei610/README b/board/amlogic/sei610/README
new file mode 100644
index 0000000..1cc2b3c
--- /dev/null
+++ b/board/amlogic/sei610/README
@@ -0,0 +1,119 @@
+U-Boot for Amlogic SEI610
+=========================
+
+SEI610 is a customer board manufactured by SEI Robotics with the following
+specifications:
+
+ - Amlogic S905X3 ARM Cortex-A55 quad-core SoC
+ - 2GB DDR4 SDRAM
+ - 10/100 Ethernet (Internal PHY)
+ - 1 x USB 3.0 Host
+ - 1 x USB Type-C DRD
+ - 1 x FTDI USB Serial Debug Interface
+ - eMMC
+ - SDcard
+ - Infrared receiver
+ - SDIO WiFi Module
+
+u-boot compilation
+==================
+
+ > export ARCH=arm
+ > export CROSS_COMPILE=aarch64-none-elf-
+ > make sei610_defconfig
+ > make
+
+Image creation
+==============
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+ > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-4.9-g12a-201904 amlogic-u-boot
+ > cd amlogic-u-boot
+ > make sm1_ac200_v1_defconfig
+ > make
+ > export UBOOTDIR=$PWD
+
+Download the latest Amlogic Buildroot package, and extract it :
+ > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/buildroot-openlinux-A113-201901.tgz
+ > tar xfz buildroot-openlinux-A113-201901.tgz buildroot-openlinux-A113-201901/bootloader
+ > export BRDIR=$PWD/buildroot-openlinux-A113-201901
+ > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
+
+Go back to mainline U-Boot source tree then :
+ > mkdir fip
+
+ > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
+ > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
+ > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/
+ > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/
+ > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/
+ > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/
+ > cp $FIPDIR/g12a/ddr3_1d.fw fip/
+ > cp $FIPDIR/g12a/ddr4_1d.fw fip/
+ > cp $FIPDIR/g12a/ddr4_2d.fw fip/
+ > cp $FIPDIR/g12a/diag_lpddr4.fw fip/
+ > cp $FIPDIR/g12a/lpddr4_1d.fw fip/
+ > cp $FIPDIR/g12a/lpddr4_2d.fw fip/
+ > cp $FIPDIR/g12a/piei.fw fip/
+ > cp u-boot.bin fip/bl33.bin
+
+ > sh fip/blx_fix.sh \
+	fip/bl30.bin \
+	fip/zero_tmp \
+	fip/bl30_zero.bin \
+	fip/bl301.bin \
+	fip/bl301_zero.bin \
+	fip/bl30_new.bin \
+	bl30
+
+ > sh fip/blx_fix.sh \
+	fip/bl2.bin \
+	fip/zero_tmp \
+	fip/bl2_zero.bin \
+	fip/acs.bin \
+	fip/bl21_zero.bin \
+	fip/bl2_new.bin \
+	bl2
+
+ > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
+					--output fip/bl30_new.bin.g12a.enc \
+					--level v3
+ > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
+					--output fip/bl30_new.bin.enc \
+					--level v3 --type bl30
+ > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
+					--output fip/bl31.img.enc \
+					--level v3 --type bl31
+ > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
+					--output fip/bl33.bin.enc \
+					--level v3 --type bl33
+ > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
+					--output fip/bl2.n.bin.sig
+ > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \
+		--output fip/u-boot.bin \
+		--bl2 fip/bl2.n.bin.sig \
+		--bl30 fip/bl30_new.bin.enc \
+		--bl31 fip/bl31.img.enc \
+		--bl33 fip/bl33.bin.enc \
+		--ddrfw1 fip/ddr4_1d.fw \
+		--ddrfw2 fip/ddr4_2d.fw \
+		--ddrfw3 fip/ddr3_1d.fw \
+		--ddrfw4 fip/piei.fw \
+		--ddrfw5 fip/lpddr4_1d.fw \
+		--ddrfw6 fip/lpddr4_2d.fw \
+		--ddrfw7 fip/diag_lpddr4.fw \
+		--level v3
+
+and then write the image to SD with:
+
+ > DEV=/dev/your_sd_device
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/board/amlogic/sei610/sei610.c b/board/amlogic/sei610/sei610.c
new file mode 100644
index 0000000..b17eb9e
--- /dev/null
+++ b/board/amlogic/sei610/sei610.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <env_internal.h>
+#include <asm/io.h>
+#include <asm/arch/axg.h>
+#include <asm/arch/sm.h>
+#include <asm/arch/eth.h>
+#include <asm/arch/mem.h>
+
+int misc_init_r(void)
+{
+	meson_eth_init(PHY_INTERFACE_MODE_RMII,
+		       MESON_USE_INTERNAL_RMII_PHY);
+
+	meson_generate_serial_ethaddr();
+
+	env_set("serial#", "AMLG12ASEI610");
+
+	return 0;
+}
diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS
index 6e68fa7..3b21f50 100644
--- a/board/amlogic/w400/MAINTAINERS
+++ b/board/amlogic/w400/MAINTAINERS
@@ -3,4 +3,5 @@ M:	Neil Armstrong <narmstrong@baylibre.com>
 S:	Maintained
 L:	u-boot-amlogic@groups.io
 F:	board/amlogic/w400/
+F:	configs/khadas-vim3_defconfig
 F:	configs/odroid-n2_defconfig
diff --git a/board/amlogic/w400/README.khadas-vim3 b/board/amlogic/w400/README.khadas-vim3
new file mode 100644
index 0000000..45ef90c
--- /dev/null
+++ b/board/amlogic/w400/README.khadas-vim3
@@ -0,0 +1,132 @@
+U-Boot for Khadas VIM3
+======================
+
+Khadas VIM3 is a single board computer manufactured by Shenzhen Wesion
+Technology Co., Ltd. with the following specifications:
+
+ - Amlogic A311D Arm Cortex-A53 dual-core + Cortex-A73 quad-core SoC
+ - 4GB LPDDR4 SDRAM
+ - Gigabit Ethernet
+ - HDMI 2.1 display
+ - 40-pin GPIO header
+ - 1 x USB 3.0 Host, 1 x USB 2.0 Host
+ - eMMC, microSD
+ - M.2
+ - Infrared receiver
+
+Schematics are available on the manufacturer website.
+
+Currently the U-Boot port supports the following devices:
+ - serial
+ - eMMC, microSD
+ - Ethernet
+ - I2C
+ - Regulators
+ - Reset controller
+ - Clock controller
+ - ADC
+
+u-boot compilation
+==================
+
+ > export ARCH=arm
+ > export CROSS_COMPILE=aarch64-none-elf-
+ > make khadas-vim3_defconfig
+ > make
+
+Image creation
+==============
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+
+ > DIR=vim3-u-boot
+ > git clone --depth 1 \
+       https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \
+       $DIR
+
+ > cd vim3-u-boot
+ > make kvim3_defconfig
+ > make
+ > export UBOOTDIR=$PWD
+
+ Go back to mainline U-Boot source tree then :
+ > mkdir fip
+
+ > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
+ > cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/
+ > cp $UBOOTDIR/fip/g12b/bl2.bin fip/
+ > cp $UBOOTDIR/fip/g12b/bl30.bin fip/
+ > cp $UBOOTDIR/fip/g12b/bl31.img fip/
+ > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/
+ > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/
+ > cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/
+ > cp $UBOOTDIR/fip/g12b/piei.fw fip/
+ > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/
+ > cp u-boot.bin fip/bl33.bin
+
+ > sh fip/blx_fix.sh \
+	fip/bl30.bin \
+	fip/zero_tmp \
+	fip/bl30_zero.bin \
+	fip/bl301.bin \
+	fip/bl301_zero.bin \
+	fip/bl30_new.bin \
+	bl30
+
+ > sh fip/blx_fix.sh \
+	fip/bl2.bin \
+	fip/zero_tmp \
+	fip/bl2_zero.bin \
+	fip/acs.bin \
+	fip/bl21_zero.bin \
+	fip/bl2_new.bin \
+	bl2
+
+ > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+					--output fip/bl30_new.bin.g12a.enc \
+					--level v3
+ > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+					--output fip/bl30_new.bin.enc \
+					--level v3 --type bl30
+ > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+					--output fip/bl31.img.enc \
+					--level v3 --type bl31
+ > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+					--output fip/bl33.bin.enc \
+					--level v3 --type bl33 --compress lz4
+ > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+					--output fip/bl2.n.bin.sig
+ > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \
+		--output fip/u-boot.bin \
+		--bl2 fip/bl2.n.bin.sig \
+		--bl30 fip/bl30_new.bin.enc \
+		--bl31 fip/bl31.img.enc \
+		--bl33 fip/bl33.bin.enc \
+		--ddrfw1 fip/ddr4_1d.fw \
+		--ddrfw2 fip/ddr4_2d.fw \
+		--ddrfw3 fip/ddr3_1d.fw \
+		--ddrfw4 fip/piei.fw \
+		--ddrfw5 fip/lpddr4_1d.fw \
+		--ddrfw6 fip/lpddr4_2d.fw \
+		--ddrfw7 fip/diag_lpddr4.fw \
+		--ddrfw8 fip/aml_ddr.fw \
+		--ddrfw9 fip/lpddr3_1d.fw \
+		--level v3
+
+and then write the image to SD with:
+
+ > DEV=/dev/your_sd_device
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444