Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

9 files changed, 95 insertions, 105 deletions

diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c
index a498c65..71ed15e 100644
--- a/board/freescale/common/arm_sleep.c
+++ b/board/freescale/common/arm_sleep.c
@@ -19,7 +19,7 @@
 
 #include "sleep.h"
 #ifdef CONFIG_U_QE
-#include "../../../drivers/qe/qe.h"
+#include <fsl_qe.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/freescale/common/mpc85xx_sleep.c b/board/freescale/common/mpc85xx_sleep.c
index e9cbd51..498d770 100644
--- a/board/freescale/common/mpc85xx_sleep.c
+++ b/board/freescale/common/mpc85xx_sleep.c
@@ -8,7 +8,7 @@
 #include <asm/immap_85xx.h>
 #include "sleep.h"
 #ifdef CONFIG_U_QE
-#include "../../../drivers/qe/qe.h"
+#include <fsl_qe.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS
index 820d322..c37ab99 100644
--- a/board/freescale/ls1021aqds/MAINTAINERS
+++ b/board/freescale/ls1021aqds/MAINTAINERS
@@ -8,6 +8,7 @@ F:	configs/ls1021aqds_ddr4_nor_defconfig
 F:	configs/ls1021aqds_ddr4_nor_lpuart_defconfig
 F:	configs/ls1021aqds_nor_SECURE_BOOT_defconfig
 F:	configs/ls1021aqds_nor_lpuart_defconfig
-F:	configs/ls1021aqds_sdcard_defconfig
+F:	configs/ls1021aqds_sdcard_ifc_defconfig
+F:	configs/ls1021aqds_sdcard_qspi_defconfig
 F:	configs/ls1021aqds_qspi_defconfig
 F:	configs/ls1021aqds_nand_defconfig
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 5f4ec9d..dbea0bf 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -10,7 +10,6 @@
 #include <asm/arch/immap_ls102xa.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
-#include <asm/arch/ls102xa_stream_id.h>
 #include <asm/arch/ls102xa_soc.h>
 #include <asm/arch/ls102xa_devdis.h>
 #include <asm/arch/ls102xa_sata.h>
@@ -28,7 +27,7 @@
 #include "../common/qixis.h"
 #include "ls1021aqds_qixis.h"
 #ifdef CONFIG_U_QE
-#include "../../../drivers/qe/qe.h"
+#include <fsl_qe.h>
 #endif
 
 #define PIN_MUX_SEL_CAN		0x03
@@ -61,7 +60,7 @@ enum {
 
 int checkboard(void)
 {
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 	char buf[64];
 #endif
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
@@ -90,7 +89,7 @@ int checkboard(void)
 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
 #endif
 
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 	printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n",
 	       QIXIS_READ(id), QIXIS_READ(arch));
 
@@ -426,42 +425,6 @@ int misc_init_r(void)
 	return 0;
 }
 
-struct liodn_id_table sec_liodn_tbl[] = {
-	SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
-	SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
-	SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
-	SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
-	SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
-	SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
-	SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
-	SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
-};
-
-struct smmu_stream_id dev_stream_id[] = {
-	{ 0x100, 0x01, "ETSEC MAC1" },
-	{ 0x104, 0x02, "ETSEC MAC2" },
-	{ 0x108, 0x03, "ETSEC MAC3" },
-	{ 0x10c, 0x04, "PEX1" },
-	{ 0x110, 0x05, "PEX2" },
-	{ 0x114, 0x06, "qDMA" },
-	{ 0x118, 0x07, "SATA" },
-	{ 0x11c, 0x08, "USB3" },
-	{ 0x120, 0x09, "QE" },
-	{ 0x124, 0x0a, "eSDHC" },
-	{ 0x128, 0x0b, "eMA" },
-	{ 0x14c, 0x0c, "2D-ACE" },
-	{ 0x150, 0x0d, "USB2" },
-	{ 0x18c, 0x0e, "DEBUG" },
-};
-
 int board_init(void)
 {
 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -481,10 +444,7 @@ int board_init(void)
 	config_serdes_mux();
 #endif
 
-	ls1021x_config_caam_stream_id(sec_liodn_tbl,
-				      ARRAY_SIZE(sec_liodn_tbl));
-	ls102xa_config_smmu_stream_id(dev_stream_id,
-				      ARRAY_SIZE(dev_stream_id));
+	ls102xa_smmu_stream_id_init();
 
 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
 	enable_layerscape_ns_access();
diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg
index 9d99bd8..9d99bd8 100644
--- a/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
+++ b/board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg
diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg
new file mode 100644
index 0000000..2bd398c
--- /dev/null
+++ b/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg
@@ -0,0 +1,14 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+
+#enable IFC, disable QSPI and DSPI
+#0608000a 00000000 00000000 00000000
+#60000000 00407900 60040a00 21046000
+#00000000 00000000 00000000 00038000
+#00000000 001b7200 00000000 00000000
+
+#disable IFC, enable QSPI and DSPI
+0608000a 00000000 00000000 00000000
+60000000 00407900 60040a00 21046000
+00000000 00000000 00000000 00038000
+20024800 001b7200 00000000 00000000
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 616e0bf..c69c9cb 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -10,7 +10,6 @@
 #include <asm/arch/immap_ls102xa.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
-#include <asm/arch/ls102xa_stream_id.h>
 #include <asm/arch/ls102xa_devdis.h>
 #include <asm/arch/ls102xa_soc.h>
 #include <asm/arch/ls102xa_sata.h>
@@ -28,7 +27,7 @@
 #include <spl.h>
 #include "../common/sleep.h"
 #ifdef CONFIG_U_QE
-#include "../../../drivers/qe/qe.h"
+#include <fsl_qe.h>
 #endif
 #include <fsl_validate.h>
 
@@ -448,43 +447,6 @@ void board_init_f(ulong dummy)
 }
 #endif
 
-
-struct liodn_id_table sec_liodn_tbl[] = {
-	SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
-	SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
-	SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
-	SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
-	SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
-	SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
-	SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
-	SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
-	SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
-};
-
-struct smmu_stream_id dev_stream_id[] = {
-	{ 0x100, 0x01, "ETSEC MAC1" },
-	{ 0x104, 0x02, "ETSEC MAC2" },
-	{ 0x108, 0x03, "ETSEC MAC3" },
-	{ 0x10c, 0x04, "PEX1" },
-	{ 0x110, 0x05, "PEX2" },
-	{ 0x114, 0x06, "qDMA" },
-	{ 0x118, 0x07, "SATA" },
-	{ 0x11c, 0x08, "USB3" },
-	{ 0x120, 0x09, "QE" },
-	{ 0x124, 0x0a, "eSDHC" },
-	{ 0x128, 0x0b, "eMA" },
-	{ 0x14c, 0x0c, "2D-ACE" },
-	{ 0x150, 0x0d, "USB2" },
-	{ 0x18c, 0x0e, "DEBUG" },
-};
-
 #ifdef CONFIG_DEEP_SLEEP
 /* program the regulator (MC34VR500) to support deep sleep */
 void ls1twr_program_regulator(void)
@@ -525,10 +487,7 @@ int board_init(void)
 #endif
 #endif
 
-	ls1021x_config_caam_stream_id(sec_liodn_tbl,
-				      ARRAY_SIZE(sec_liodn_tbl));
-	ls102xa_config_smmu_stream_id(dev_stream_id,
-				      ARRAY_SIZE(dev_stream_id));
+	ls102xa_smmu_stream_id_init();
 
 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
 	enable_layerscape_ns_access();
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index 01db078..a72fe52 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -223,10 +223,25 @@ void board_retimer_init(void)
 
 int board_early_init_f(void)
 {
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+	u32 usb_pwrfault;
+#endif
 #ifdef CONFIG_LPUART
 	u8 uart;
 #endif
 	fsl_lsch2_early_init_f();
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+	out_be32(&scfg->rcwpmuxcr0, 0x3333);
+	out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
+	usb_pwrfault =
+		(SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB3_SHIFT) |
+		(SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB2_SHIFT) |
+		(SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB1_SHIFT);
+	out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
+#endif
+
 #ifdef CONFIG_LPUART
 	/* We use lpuart0 as system console */
 	uart = QIXIS_READ(brdcfg[14]);
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index c8f723a..66d974a 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -21,6 +21,10 @@
 #include <environment.h>
 #include <fsl_sec.h>
 #include "cpld.h"
+#ifdef CONFIG_U_QE
+#include <fsl_qe.h>
+#endif
+
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -71,23 +75,8 @@ int dram_init(void)
 
 int board_early_init_f(void)
 {
-	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
-	u32 usb_pwrfault;
-
 	fsl_lsch2_early_init_f();
 
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-	out_be32(&scfg->rcwpmuxcr0, 0x3333);
-	out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
-	usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
-			SCFG_USBPWRFAULT_USB3_SHIFT) |
-			(SCFG_USBPWRFAULT_DEDICATED <<
-			SCFG_USBPWRFAULT_USB2_SHIFT) |
-			(SCFG_USBPWRFAULT_SHARED <<
-			 SCFG_USBPWRFAULT_USB1_SHIFT);
-	out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
-#endif
-
 	return 0;
 }
 
@@ -113,11 +102,36 @@ int board_init(void)
 	enable_layerscape_ns_access();
 #endif
 
+#ifdef CONFIG_U_QE
+	u_qe_init();
+#endif
+
 	return 0;
 }
 
 int config_board_mux(void)
 {
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+	u32 usb_pwrfault;
+
+	if (hwconfig("qe-hdlc")) {
+		out_be32(&scfg->rcwpmuxcr0,
+			 (in_be32(&scfg->rcwpmuxcr0) & ~0xff00) | 0x6600);
+		printf("Assign to qe-hdlc clk, rcwpmuxcr0=%x\n",
+		       in_be32(&scfg->rcwpmuxcr0));
+	} else {
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+		out_be32(&scfg->rcwpmuxcr0, 0x3333);
+		out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
+		usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
+				SCFG_USBPWRFAULT_USB3_SHIFT) |
+				(SCFG_USBPWRFAULT_DEDICATED <<
+				SCFG_USBPWRFAULT_USB2_SHIFT) |
+				(SCFG_USBPWRFAULT_SHARED <<
+				 SCFG_USBPWRFAULT_USB1_SHIFT);
+		out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
+#endif
+	}
 	return 0;
 }
 
@@ -144,6 +158,16 @@ int misc_init_r(void)
 }
 #endif
 
+void fdt_del_qe(void *blob)
+{
+	int nodeoff = 0;
+
+	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+				"fsl,qe")) >= 0) {
+		fdt_del_node(blob, nodeoff);
+	}
+}
+
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	u64 base[CONFIG_NR_DRAM_BANKS];
@@ -161,6 +185,23 @@ int ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_SYS_DPAA_FMAN
 	fdt_fixup_fman_ethernet(blob);
 #endif
+
+	/*
+	 * qe-hdlc and usb multi-use the pins,
+	 * when set hwconfig to qe-hdlc, delete usb node.
+	 */
+	if (hwconfig("qe-hdlc"))
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+		fdt_del_node_and_alias(blob, "usb1");
+#endif
+	/*
+	 * qe just support qe-uart and qe-hdlc,
+	 * if qe-uart and qe-hdlc are not set in hwconfig,
+	 * delete qe node.
+	 */
+	if (!hwconfig("qe-uart") && !hwconfig("qe-hdlc"))
+		fdt_del_qe(blob);
+
 	return 0;
 }