ARM: imx: Remove PMIC reset configuration from board files

The PCA9450 reset configuration can now be performed by the PCA9450 PMIC
driver itself, remove the hard-coded variant from board code and let the
PMIC driver perform this task using one-liner:

```
$ sed -i '/set WDOG_B_CFG to cold reset/,+2 d' $(git grep -l PCA9450_RESET_CTRL.*0xA1 board/)
```

Venice and i.MX93 EVK required slight manual fix up.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

11 files changed, 0 insertions, 33 deletions

diff --git a/board/advantech/imx8mp_rsb3720a1/spl.c b/board/advantech/imx8mp_rsb3720a1/spl.c
index 6cc8c23..f4257bc 100644
--- a/board/advantech/imx8mp_rsb3720a1/spl.c
+++ b/board/advantech/imx8mp_rsb3720a1/spl.c
@@ -209,9 +209,6 @@ int power_init_board(void)
 	/* To avoid timing risk from SOC to ARM,increase VDD_ARM to OD voltage 0.95v */
 	pmic_reg_write(pdev, PCA9450_BUCK2OUT_DVS0, 0x1C);
 
-	/* set WDOG_B_CFG to cold reset */
-	pmic_reg_write(pdev, PCA9450_RESET_CTRL, 0xA1);
-
 	/* Forced enable the I2C level translator*/
 	pmic_reg_write(pdev, PCA9450_CONFIG2, 0x03);
 
diff --git a/board/dhelectronics/dh_imx8mp/spl.c b/board/dhelectronics/dh_imx8mp/spl.c
index 312e4b9..95de745 100644
--- a/board/dhelectronics/dh_imx8mp/spl.c
+++ b/board/dhelectronics/dh_imx8mp/spl.c
@@ -88,9 +88,6 @@ static int dh_imx8mp_board_power_init(void)
 	/* To avoid timing risk from SoC to ARM, increase VDD_ARM to OD voltage 0.95V */
 	pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1c);
 
-	/* Set WDOG_B_CFG to cold reset. */
-	pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
-
 	/* Set LDO4 and CONFIG2 to enable the I2C level translator. */
 	pmic_reg_write(dev, PCA9450_LDO4CTRL, 0x59);
 	pmic_reg_write(dev, PCA9450_CONFIG2, 0x1);
diff --git a/board/engicam/imx8mp/spl.c b/board/engicam/imx8mp/spl.c
index 6a16d58..36b83aa 100644
--- a/board/engicam/imx8mp/spl.c
+++ b/board/engicam/imx8mp/spl.c
@@ -95,9 +95,6 @@ int power_init_board(void)
 	pmic_reg_write(p, PCA9450_BUCK6OUT, 0x18);
 #endif
 
-	/* set WDOG_B_CFG to cold reset */
-	pmic_reg_write(p, PCA9450_RESET_CTRL, 0xA1);
-
 	return 0;
 }
 #endif
diff --git a/board/freescale/imx8mm_evk/spl.c b/board/freescale/imx8mm_evk/spl.c
index b5a2faf..6e95138 100644
--- a/board/freescale/imx8mm_evk/spl.c
+++ b/board/freescale/imx8mm_evk/spl.c
@@ -99,9 +99,6 @@ static int power_init_board(void)
 	/* set VDD_SNVS_0V8 from default 0.85V */
 	pmic_reg_write(dev, PCA9450_LDO2CTRL, 0xC0);
 
-	/* set WDOG_B_CFG to cold reset */
-	pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
-
 	return 0;
 }
 
diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c
index 380abec..ec0378b 100644
--- a/board/freescale/imx8mn_evk/spl.c
+++ b/board/freescale/imx8mn_evk/spl.c
@@ -95,9 +95,6 @@ int power_init_board(void)
 	/* enable LDO4 to 1.2v */
 	pmic_reg_write(dev, PCA9450_LDO4CTRL, 0x44);
 
-	/* set WDOG_B_CFG to cold reset */
-	pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
-
 	return 0;
 }
 #endif
diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c
index f1b2854..246826a 100644
--- a/board/freescale/imx8mp_evk/spl.c
+++ b/board/freescale/imx8mp_evk/spl.c
@@ -102,9 +102,6 @@ int power_init_board(void)
 	/* To avoid timing risk from SOC to ARM,increase VDD_ARM to OD voltage 0.95v */
 	pmic_reg_write(p, PCA9450_BUCK2OUT_DVS0, 0x1C);
 
-	/* set WDOG_B_CFG to cold reset */
-	pmic_reg_write(p, PCA9450_RESET_CTRL, 0xA1);
-
 	return 0;
 }
 #endif
diff --git a/board/freescale/imx93_evk/spl.c b/board/freescale/imx93_evk/spl.c
index 38cfbac..1aa2977 100644
--- a/board/freescale/imx93_evk/spl.c
+++ b/board/freescale/imx93_evk/spl.c
@@ -74,9 +74,6 @@ int power_init_board(void)
 
 	/* I2C_LT_EN*/
 	pmic_reg_write(dev, 0xa, 0x3);
-
-	/* set WDOG_B_CFG to cold reset */
-	pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
 	return 0;
 }
 #endif
diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c
index e06de8b..6083076 100644
--- a/board/gateworks/venice/spl.c
+++ b/board/gateworks/venice/spl.c
@@ -165,9 +165,6 @@ static int power_init_board(void)
 		/* Kernel uses OD/OD freq for SOC */
 		/* To avoid timing risk from SOC to ARM, increase VDD_ARM to OD voltage 0.95v */
 		dm_i2c_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1C);
-
-		/* set WDOG_B_CFG to cold reset */
-		dm_i2c_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
 	}
 
 	else if ((!strncmp(model, "GW7901", 6)) ||
diff --git a/board/kontron/sl-mx8mm/spl.c b/board/kontron/sl-mx8mm/spl.c
index 25ee925..3a919d0 100644
--- a/board/kontron/sl-mx8mm/spl.c
+++ b/board/kontron/sl-mx8mm/spl.c
@@ -193,9 +193,6 @@ static int power_init_board(void)
 	/* set VDD_SNVS_0V8 from default 0.85V to 0.8V */
 	pmic_reg_write(dev, PCA9450_LDO2CTRL, 0xC0);
 
-	/* set WDOG_B_CFG to cold reset */
-	pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
-
 	return 0;
 }
 
diff --git a/board/toradex/verdin-imx8mm/spl.c b/board/toradex/verdin-imx8mm/spl.c
index 210665b..9d54d60 100644
--- a/board/toradex/verdin-imx8mm/spl.c
+++ b/board/toradex/verdin-imx8mm/spl.c
@@ -92,9 +92,6 @@ int power_init_board(void)
 		/* increase VDD_DRAM to 0.975v for 1.5Ghz DDR */
 		pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x1c);
 
-		/* set WDOG_B_CFG to cold reset */
-		pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
-
 		pmic_reg_write(dev, PCA9450_CONFIG2, 0x1);
 
 		return 0;
diff --git a/board/toradex/verdin-imx8mp/spl.c b/board/toradex/verdin-imx8mp/spl.c
index 1838b46..ea99e37 100644
--- a/board/toradex/verdin-imx8mp/spl.c
+++ b/board/toradex/verdin-imx8mp/spl.c
@@ -116,9 +116,6 @@ int power_init_board(void)
 	/* To avoid timing risk from SoC to ARM, increase VDD_ARM to OD voltage 0.95v */
 	pmic_reg_write(p, PCA9450_BUCK2OUT_DVS0, 0x1c);
 
-	/* set WDOG_B_CFG to cold reset */
-	pmic_reg_write(p, PCA9450_RESET_CTRL, 0xA1);
-
 	/* set LDO4 and CONFIG2 to enable the I2C level translator */
 	pmic_reg_write(p, PCA9450_LDO4CTRL, 0x59);
 	pmic_reg_write(p, PCA9450_CONFIG2, 0x1);