Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx

Support of device tree model for T2080RDB, T4240RDB, T1024RDB,
T1042D4RDB, P1020RDB, P2020RDB, P2041RDB, P3041DS, P4080DS, P5040DS and
MPC8548CDS. Also support of  i2c dm model.

5 files changed, 94 insertions, 0 deletions

diff --git a/board/freescale/p1_p2_rdb_pc/README b/board/freescale/p1_p2_rdb_pc/README
index f4cc43f..b85cf02 100644
--- a/board/freescale/p1_p2_rdb_pc/README
+++ b/board/freescale/p1_p2_rdb_pc/README
@@ -45,3 +45,22 @@ enable QE-TDM for linux kernel, set "qe;tdm" in hwconfig. Syntax is as below
 
 'setenv hwconfig qe' to enable QE UEC/UART and disable Nor-Flash/CPLD.
 'setenv hwconfig 'qe;tdm'' to enalbe QE TDM and disable Nor-Flash/CPLD.
+
+Device tree support and how to enable it for different configs
+--------------------------------------------------------------
+Device tree support is available for p1020rdb and p2020rdb for below mentioned boot,
+1. NOR Boot
+2. NAND Boot
+3. SD Boot
+4. SPIFLASH Boot
+
+To enable device tree support for other boot, below configs need to be
+enabled in relative defconfig file,
+1. CONFIG_DEFAULT_DEVICE_TREE="p1020rdb" (Change default device tree name if required)
+2. CONFIG_OF_CONTROL
+3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
+   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+
+If device tree support is enabled in defconfig,
+1. use 'u-boot-with-dtb.bin' for NOR boot.
+2. use 'u-boot-with-spl.bin' for other boot.
diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README
index 9b5539f..79f77e4 100644
--- a/board/freescale/p2041rdb/README
+++ b/board/freescale/p2041rdb/README
@@ -85,6 +85,24 @@ Boot from SPI flash
 	SW1[1-5] = 10100
 	Note: 1 stands for 'on', 0 stands for 'off'
 
+Device tree support and how to enable it for different configs
+--------------------------------------------------------------
+Device tree support is available for p2041rdb for below mentioned boot,
+1. NOR Boot
+2. NAND Boot
+3. SD Boot
+4. SPIFLASH Boot
+
+To enable device tree support for other boot, below configs need to be
+enabled in relative defconfig file,
+1. CONFIG_DEFAULT_DEVICE_TREE="p2041rdb" (Change default device tree name if required)
+2. CONFIG_OF_CONTROL
+3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
+   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+
+If device tree support is enabled in defconfig, use 'u-boot-with-dtb.bin'
+instead of u-boot.bin for all boot.
+
 CPLD command
 ============
 The CPLD is used to control the power sequence and some serdes lane
diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README
index a0af25a..dde3f8c 100644
--- a/board/freescale/t102xrdb/README
+++ b/board/freescale/t102xrdb/README
@@ -251,6 +251,25 @@ Software configurations and board settings
    SW3[3] = '0' for eMMC (or 'switch emmc' by software)
 
 
+device tree support and how to enable it for different configs
+--------------------------------------------------------------
+device tree support is available for t1024rdb for below mentioned boot,
+1. nor boot
+2. nand boot
+3. sd boot
+4. spiflash boot
+
+to enable device tree support for other boot, below configs need to be
+enabled in relative defconfig file,
+1. config_default_device_tree="t1024rdb" (change default device tree name if required)
+2. config_of_control
+3. config_mpc85xx_have_reset_vector if reset vector is located at
+   config_reset_vector_address - 0xffc
+
+if device tree support is enabled in defconfig,
+1. use 'u-boot-with-dtb.bin' for nor boot.
+2. use 'u-boot-with-spl-pbl.bin' for other boot.
+
 2-stage NAND/SPI/SD boot loader
 -------------------------------
 PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index 98b3f63..09cb98e 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -365,3 +365,22 @@ to
 2. SPI does not support flush so remove flush from pbl, make changes in
    tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
    with 0x091380c0
+
+Device tree support and how to enable it for different configs
+--------------------------------------------------------------
+Device tree support is available for t1042d4rdb for below mentioned boot,
+1. NOR Boot
+2. NAND Boot
+3. SD Boot
+4. SPIFLASH Boot
+
+To enable device tree support for other boot, below configs need to be
+enabled in relative defconfig file,
+1. CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" (Change default device tree name if required)
+2. CONFIG_OF_CONTROL
+3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
+   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+
+If device tree support is enabled in defconfig,
+1. use 'u-boot-with-dtb.bin' for NOR boot.
+2. use 'u-boot-with-spl-pbl.bin' for other boot.
diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README
index 42b2b92..9e4b28f 100644
--- a/board/freescale/t208xrdb/README
+++ b/board/freescale/t208xrdb/README
@@ -262,3 +262,22 @@ How to update the ucode of Freescale FMAN
 
 For more details, please refer to T2080PCIe-RDB User Guide and access
 website www.freescale.com and Freescale QorIQ SDK Infocenter document.
+
+Device tree support and how to enable it for different configs
+--------------------------------------------------------------
+Device tree support is available for t2080rdb for below mentioned boot,
+1. NOR Boot
+2. NAND Boot
+3. SD Boot
+4. SPIFLASH Boot
+
+To enable device tree support for other boot, below configs need to be
+enabled in relative defconfig file,
+1. CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" (Change default device tree name if required)
+2. CONFIG_OF_CONTROL
+3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
+   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+
+If device tree support is enabled in defconfig,
+1. use 'u-boot-with-dtb.bin' for NOR boot.
+2. use 'u-boot-with-spl-pbl.bin' for other boot.