aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorJustin Waters <justin.waters@timesys.com>2016-04-13 17:03:18 -0400
committerStefano Babic <sbabic@denx.de>2016-04-19 15:54:59 +0200
commit7d0b8cfeaa930b5946b993373a21b41ea0746be0 (patch)
treeb762eea1c5f149eea51c58916e47ed4d82fab07e /board
parent108f8418597350bd98357f25acaa8ab8a0435779 (diff)
downloadu-boot-7d0b8cfeaa930b5946b993373a21b41ea0746be0.zip
u-boot-7d0b8cfeaa930b5946b993373a21b41ea0746be0.tar.gz
u-boot-7d0b8cfeaa930b5946b993373a21b41ea0746be0.tar.bz2
board: ge: bx50v3: Disable unused pins
Certain pins are not used on the i.MX6, and should have a neutral pad configuration in order to reduce electrical interference on the board. This commit defines these pins with a default value rather than relying on the system defaults. Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board')
-rw-r--r--board/ge/bx50v3/bx50v3.c10
1 files changed, 10 insertions, 0 deletions
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 70c298d..3cf5105 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -27,6 +27,10 @@
#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
+#define NC_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_HYS)
+
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
@@ -467,6 +471,12 @@ int board_eth_init(bd_t *bis)
static iomux_v3_cfg_t const misc_pads[] = {
MX6_PAD_KEY_ROW2__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NC_PAD_CTRL),
+ MX6_PAD_EIM_CS0__GPIO2_IO23 | MUX_PAD_CTRL(NC_PAD_CTRL),
+ MX6_PAD_EIM_CS1__GPIO2_IO24 | MUX_PAD_CTRL(NC_PAD_CTRL),
+ MX6_PAD_EIM_OE__GPIO2_IO25 | MUX_PAD_CTRL(NC_PAD_CTRL),
+ MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NC_PAD_CTRL),
+ MX6_PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NC_PAD_CTRL),
};
#define SUS_S3_OUT IMX_GPIO_NR(4, 11)
#define WIFI_EN IMX_GPIO_NR(6, 14)