aboutsummaryrefslogtreecommitdiff
path: root/board/xilinx
diff options
context:
space:
mode:
authorLuca Ceresoli <luca@lucaceresoli.net>2019-05-21 18:06:43 +0200
committerMichal Simek <michal.simek@xilinx.com>2019-07-30 10:20:06 +0200
commitc28a9cfa4079031edd511746770096a131414642 (patch)
treecc60c3832d062604109d4c123dfc412e5fbde2db /board/xilinx
parent420d44678119a5df1fcc154d1c33d35fd9722285 (diff)
downloadu-boot-c28a9cfa4079031edd511746770096a131414642.zip
u-boot-c28a9cfa4079031edd511746770096a131414642.tar.gz
u-boot-c28a9cfa4079031edd511746770096a131414642.tar.bz2
arm64: zynqmp: spl: install a PMU firmware config object at runtime
Optionally allow U-Boot to load a configuration object into the Power Management Unit (PMU) firmware on Xilinx ZynqMP. The configuration object is required by the PMU FW to enable most SoC peripherals. So far the only way to boot using U-Boot SPL was to hard-code the configuration object in the PMU firmware. Allow a different boot process, where the PMU FW is equal for any ZynqMP chip and its configuration is passed at runtime by U-Boot SPL. All the code for Inter-processor communication with the PMU is isolated in a new file (pmu_ipc.c). The code is inspired by the same feature as implemented in the Xilinx First Stage Bootloader (FSBL) and Arm Trusted Firmware: * https://github.com/Xilinx/embeddedsw/blob/fb647e6b4c00f5154eba52a88b948195b6f1dc2b/lib/sw_apps/zynqmp_fsbl/src/xfsbl_misc_drivers.c#L295 * https://github.com/ARM-software/arm-trusted-firmware/blob/c48d02bade88b07fa7f43aa44e5217f68e5d047f/plat/xilinx/zynqmp/pm_service/pm_api_sys.c#L357 SPL logs on the console before loading the configuration object: U-Boot SPL 2019.07-rc1-00511-gaec224515c87 (May 15 2019 - 08:43:41 +0200) Loading PMUFW cfg obj (2008 bytes) EL Level: EL3 ... Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Diffstat (limited to 'board/xilinx')
-rw-r--r--board/xilinx/zynqmp/Makefile5
-rw-r--r--board/xilinx/zynqmp/pm_cfg_obj.S17
-rw-r--r--board/xilinx/zynqmp/pm_cfg_obj.h9
-rw-r--r--board/xilinx/zynqmp/zynqmp.c9
4 files changed, 40 insertions, 0 deletions
diff --git a/board/xilinx/zynqmp/Makefile b/board/xilinx/zynqmp/Makefile
index 80f8ca7..b4d39ed 100644
--- a/board/xilinx/zynqmp/Makefile
+++ b/board/xilinx/zynqmp/Makefile
@@ -33,6 +33,11 @@ ifneq ($(call ifdef_any_of, CONFIG_ZYNQMP_PSU_INIT_ENABLED CONFIG_SPL_BUILD),)
obj-y += $(init-objs)
endif
+ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"")
+obj-$(CONFIG_SPL_BUILD) += pm_cfg_obj.o
+$(obj)/pm_cfg_obj.o: $(shell cd $(srctree); readlink -f $(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE)) FORCE
+endif
+
obj-$(CONFIG_MMC_SDHCI_ZYNQ) += tap_delays.o
ifndef CONFIG_SPL_BUILD
diff --git a/board/xilinx/zynqmp/pm_cfg_obj.S b/board/xilinx/zynqmp/pm_cfg_obj.S
new file mode 100644
index 0000000..c4ca77e
--- /dev/null
+++ b/board/xilinx/zynqmp/pm_cfg_obj.S
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+.section .rodata
+
+.global zynqmp_pm_cfg_obj
+.type zynqmp_pm_cfg_obj, @object
+.global zynqmp_pm_cfg_obj_size
+.type zynqmp_pm_cfg_obj_size, @object
+
+zynqmp_pm_cfg_obj:
+.align 4
+.incbin CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE
+
+zynqmp_pm_cfg_obj_end:
+
+zynqmp_pm_cfg_obj_size:
+.int zynqmp_pm_cfg_obj_end - zynqmp_pm_cfg_obj
diff --git a/board/xilinx/zynqmp/pm_cfg_obj.h b/board/xilinx/zynqmp/pm_cfg_obj.h
new file mode 100644
index 0000000..86e7854
--- /dev/null
+++ b/board/xilinx/zynqmp/pm_cfg_obj.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Luca Ceresoli <luca@lucaceresoli.net>
+ *
+ * Declaration of PMU config object binary blob linked in at build time.
+ */
+
+extern const u32 zynqmp_pm_cfg_obj[];
+extern const int zynqmp_pm_cfg_obj_size;
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index c840e92..057ca1f 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -22,6 +22,8 @@
#include <zynqmppl.h>
#include <g_dnl.h>
+#include "pm_cfg_obj.h"
+
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
@@ -327,6 +329,13 @@ int board_early_init_f(void)
int board_init(void)
{
+#if defined(CONFIG_SPL_BUILD)
+ /* Check *at build time* if the filename is an non-empty string */
+ if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1)
+ zynqmp_pmufw_load_config_object(zynqmp_pm_cfg_obj,
+ zynqmp_pm_cfg_obj_size);
+#endif
+
printf("EL Level:\tEL%d\n", current_el());
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \