Merge branch 'next'

Merge all outstanding changes from the current next branch in now that
we have released.

14 files changed, 50 insertions, 438 deletions

diff --git a/board/ti/am335x/MAINTAINERS b/board/ti/am335x/MAINTAINERS
index 565f705..e100adf 100644
--- a/board/ti/am335x/MAINTAINERS
+++ b/board/ti/am335x/MAINTAINERS
@@ -3,7 +3,5 @@ M:	Tom Rini <trini@konsulko.com>
 S:	Maintained
 F:	board/ti/am335x/
 F:	include/configs/am335x_evm.h
-F:	configs/am335x_boneblack_defconfig
 F:	configs/am335x_boneblack_vboot_defconfig
 F:	configs/am335x_evm_defconfig
-F:	configs/am335x_evm_usbspl_defconfig
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 4199bee..123ccaa 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -912,7 +912,6 @@ struct cpsw_platform_data am335_eth_data = {
 	.slaves			= 2,
 	.slave_data		= slave_data,
 	.ale_entries		= 1024,
-	.bd_ram_ofs		= 0x2000,
 	.mac_control		= 0x20,
 	.active_slave		= 0,
 	.mdio_base		= 0x4a101000,
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 8720eb8..511858a 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -61,6 +61,10 @@ static int board_bootmode_has_emmc(void);
 #define board_is_am571x_idk()	board_ti_is("AM571IDK")
 #define board_is_bbai()		board_ti_is("BBONE-AI")
 
+#define board_is_ti_idk()	board_is_am574x_idk() || \
+				board_is_am572x_idk() || \
+				board_is_am571x_idk()
+
 #ifdef CONFIG_DRIVER_TI_CPSW
 #include <cpsw.h>
 #endif
@@ -68,8 +72,7 @@ static int board_bootmode_has_emmc(void);
 DECLARE_GLOBAL_DATA_PTR;
 
 #define GPIO_ETH_LCD		GPIO_TO_PIN(2, 22)
-/* GPIO 7_11 */
-#define GPIO_DDR_VTT_EN 203
+#define GPIO_DDR_VTT_EN		GPIO_TO_PIN(7, 11)
 
 /* Touch screen controller to identify the LCD */
 #define OSD_TS_FT_BUS_ADDRESS	0
@@ -667,7 +670,7 @@ void am57x_idk_lcd_detect(void)
 	struct udevice *dev;
 
 	/* Only valid for IDKs */
-	if (board_is_x15() || board_is_am572x_evm() ||  board_is_bbai())
+	if (!board_is_ti_idk())
 		return;
 
 	/* Only AM571x IDK has gpio control detect.. so check that */
diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c
index a22900d..20b75ba 100644
--- a/board/ti/am65x/evm.c
+++ b/board/ti/am65x/evm.c
@@ -108,10 +108,10 @@ int ft_board_setup(void *blob, bd_t *bd)
 	}
 
 #if defined(CONFIG_TI_SECURE_DEVICE)
-	/* Make HW RNG reserved for secure world use */
-	ret = fdt_disable_node(blob, "/interconnect@100000/trng@4e10000");
+	/* Make Crypto HW reserved for secure world use */
+	ret = fdt_disable_node(blob, "/interconnect@100000/crypto@4E00000");
 	if (ret)
-		printf("%s: disabling TRGN failed %d\n", __func__, ret);
+		printf("%s: disabling SA2UL failed %d\n", __func__, ret);
 #endif
 
 	return 0;
diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
index 4296684..e09ecda 100644
--- a/board/ti/common/board_detect.c
+++ b/board/ti/common/board_detect.c
@@ -669,17 +669,17 @@ void __maybe_unused set_board_info_env(char *name)
 
 	if (name)
 		env_set("board_name", name);
-	else if (ep->name)
+	else if (strlen(ep->name) != 0)
 		env_set("board_name", ep->name);
 	else
 		env_set("board_name", unknown);
 
-	if (ep->version)
+	if (strlen(ep->version) != 0)
 		env_set("board_rev", ep->version);
 	else
 		env_set("board_rev", unknown);
 
-	if (ep->serial)
+	if (strlen(ep->serial) != 0)
 		env_set("board_serial", ep->serial);
 	else
 		env_set("board_serial", unknown);
@@ -692,22 +692,22 @@ void __maybe_unused set_board_info_env_am6(char *name)
 
 	if (name)
 		env_set("board_name", name);
-	else if (ep->name)
+	else if (strlen(ep->name) != 0)
 		env_set("board_name", ep->name);
 	else
 		env_set("board_name", unknown);
 
-	if (ep->version)
+	if (strlen(ep->version) != 0)
 		env_set("board_rev", ep->version);
 	else
 		env_set("board_rev", unknown);
 
-	if (ep->software_revision)
+	if (strlen(ep->software_revision) != 0)
 		env_set("board_software_revision", ep->software_revision);
 	else
 		env_set("board_software_revision", unknown);
 
-	if (ep->serial)
+	if (strlen(ep->serial) != 0)
 		env_set("board_serial", ep->serial);
 	else
 		env_set("board_serial", unknown);
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index e35f319..319bb6a 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -12,6 +12,7 @@
 #include <asm/arch/omap.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
+#include <serial.h>
 #include <tca642x.h>
 #include <usb.h>
 #include <linux/delay.h>
@@ -149,39 +150,21 @@ int board_init(void)
 	return 0;
 }
 
-int board_eth_init(bd_t *bis)
+#if defined(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
 {
+	/* break into full u-boot on 'c' */
+	if (serial_tstc() && serial_getc() == 'c')
+		return 1;
+
 	return 0;
 }
+#endif /* CONFIG_SPL_OS_BOOT */
 
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP)
-static void enable_host_clocks(void)
+int board_eth_init(bd_t *bis)
 {
-	int auxclk;
-	int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK |
-				OPTFCLKEN_HSIC480M_P3_CLK |
-				OPTFCLKEN_HSIC60M_P2_CLK |
-				OPTFCLKEN_HSIC480M_P2_CLK |
-				OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK);
-
-	/* Enable port 2 and 3 clocks*/
-	setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val);
-
-	/* Enable port 2 and 3 usb host ports tll clocks*/
-	setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
-			(OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE));
-#ifdef CONFIG_USB_XHCI_OMAP
-	/* Enable the USB OTG Super speed clocks */
-	setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
-			(OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW));
-#endif
-
-	auxclk = readl((*prcm)->scrm_auxclk1);
-	/* Request auxilary clock */
-	auxclk |= AUXCLK_ENABLE_MASK;
-	writel(auxclk, (*prcm)->scrm_auxclk1);
+	return 0;
 }
-#endif
 
 /**
  * @brief misc_init_r - Configure EVM board specific configurations
@@ -223,45 +206,6 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
-#ifdef CONFIG_USB_EHCI_HCD
-static struct omap_usbhs_board_data usbhs_bdata = {
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
-	.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	int ret;
-
-	enable_host_clocks();
-
-	ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-	if (ret < 0) {
-		puts("Failed to initialize ehci\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-int ehci_hcd_stop(void)
-{
-	return omap_ehci_hcd_stop();
-}
-
-void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
-{
-	/* The LAN9730 needs to be reset after the port power has been set. */
-	if (port == 3) {
-		gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0);
-		udelay(10);
-		gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1);
-	}
-}
-#endif
-
 #ifdef CONFIG_USB_XHCI_OMAP
 /**
  * @brief board_usb_init - Configure EVM board specific configurations
@@ -276,8 +220,6 @@ int board_usb_init(int index, enum usb_init_type init)
 	ret = palmas_enable_ss_ldo();
 #endif
 
-	enable_host_clocks();
-
 	return 0;
 }
 #endif
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 9ebecfd..232d999 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -8,6 +8,7 @@
 #include <init.h>
 #include <log.h>
 #include <net.h>
+#include <serial.h>
 #include <asm/mach-types.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
@@ -19,12 +20,6 @@
 
 #include "panda_mux_data.h"
 
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/arch/ehci.h>
-#include <asm/ehci-omap.h>
-#endif
-
 #define PANDA_ULPI_PHY_TYPE_GPIO       182
 #define PANDA_BOARD_ID_1_GPIO          101
 #define PANDA_ES_BOARD_ID_1_GPIO        48
@@ -55,6 +50,17 @@ int board_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
+{
+	/* break into full u-boot on 'c' */
+	if (serial_tstc() && serial_getc() == 'c')
+		return 1;
+
+	return 0;
+}
+#endif /* CONFIG_SPL_OS_BOOT */
+
 int board_eth_init(bd_t *bis)
 {
 	return 0;
@@ -305,38 +311,6 @@ void board_mmc_power_init(void)
 #endif
 #endif
 
-#ifdef CONFIG_USB_EHCI_HCD
-
-static struct omap_usbhs_board_data usbhs_bdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	int ret;
-	unsigned int utmi_clk;
-
-	/* Now we can enable our port clocks */
-	utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
-	utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
-	setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk);
-
-	ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-int ehci_hcd_stop(int index)
-{
-	return omap_ehci_hcd_stop();
-}
-#endif
-
 /*
  * get_board_rev() - get board revision
  */
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index a5b3504..5b294ea 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -9,6 +9,7 @@
 #include <init.h>
 #include <net.h>
 #include <twl6030.h>
+#include <serial.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
 
@@ -91,6 +92,17 @@ void board_mmc_power_init(void)
 #endif
 #endif
 
+#if defined(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
+{
+	/* break into full u-boot on 'c' */
+	if (serial_tstc() && serial_getc() == 'c')
+		return 1;
+
+	return 0;
+}
+#endif /* CONFIG_SPL_OS_BOOT */
+
 /*
  * get_board_rev() - get board revision
  */
diff --git a/board/ti/ti814x/Kconfig b/board/ti/ti814x/Kconfig
deleted file mode 100644
index 2960099..0000000
--- a/board/ti/ti814x/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_TI814X_EVM
-
-config SYS_BOARD
-	default "ti814x"
-
-config SYS_VENDOR
-	default "ti"
-
-config SYS_SOC
-	default "am33xx"
-
-config SYS_CONFIG_NAME
-	default "ti814x_evm"
-
-endif
diff --git a/board/ti/ti814x/MAINTAINERS b/board/ti/ti814x/MAINTAINERS
deleted file mode 100644
index b2ee39e..0000000
--- a/board/ti/ti814x/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-TI814X BOARD
-M:	Tom Rini <trini@konsulko.com>
-S:	Maintained
-F:	board/ti/ti814x/
-F:	include/configs/ti814x_evm.h
-F:	configs/ti814x_evm_defconfig
diff --git a/board/ti/ti814x/Makefile b/board/ti/ti814x/Makefile
deleted file mode 100644
index c5ff8d0..0000000
--- a/board/ti/ti814x/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Makefile
-#
-# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
-
-ifdef CONFIG_SPL_BUILD
-obj-y	:= mux.o
-endif
-
-obj-y	+= evm.o
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
deleted file mode 100644
index 8ed80d2..0000000
--- a/board/ti/ti814x/evm.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * evm.c
- *
- * Board functions for TI814x EVM
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- */
-
-#include <common.h>
-#include <cpsw.h>
-#include <env.h>
-#include <errno.h>
-#include <init.h>
-#include <net.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include "evm.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-/* UART Defines */
-#ifdef CONFIG_SPL_BUILD
-static const struct cmd_control evm_ddr2_cctrl_data = {
-	.cmd0csratio	= 0x80,
-	.cmd0iclkout	= 0x00,
-
-	.cmd1csratio	= 0x80,
-	.cmd1iclkout	= 0x00,
-
-	.cmd2csratio	= 0x80,
-	.cmd2iclkout	= 0x00,
-};
-
-static const struct emif_regs evm_ddr2_emif0_regs = {
-	.sdram_config			= 0x40801ab2,
-	.ref_ctrl			= 0x10000c30,
-	.sdram_tim1			= 0x0aaaf552,
-	.sdram_tim2			= 0x043631d2,
-	.sdram_tim3			= 0x00000327,
-	.emif_ddr_phy_ctlr_1		= 0x00000007
-};
-
-static const struct emif_regs evm_ddr2_emif1_regs = {
-	.sdram_config			= 0x40801ab2,
-	.ref_ctrl			= 0x10000c30,
-	.sdram_tim1			= 0x0aaaf552,
-	.sdram_tim2			= 0x043631d2,
-	.sdram_tim3			= 0x00000327,
-	.emif_ddr_phy_ctlr_1		= 0x00000007
-};
-
-const struct dmm_lisa_map_regs evm_lisa_map_regs = {
-	.dmm_lisa_map_0			= 0x00000000,
-	.dmm_lisa_map_1			= 0x00000000,
-	.dmm_lisa_map_2			= 0x806c0300,
-	.dmm_lisa_map_3			= 0x806c0300,
-};
-
-static const struct ddr_data evm_ddr2_data = {
-	.datardsratio0		= ((0x35<<10) | (0x35<<0)),
-	.datawdsratio0		= ((0x20<<10) | (0x20<<0)),
-	.datawiratio0		= ((0<<10) | (0<<0)),
-	.datagiratio0		= ((0<<10) | (0<<0)),
-	.datafwsratio0		= ((0x90<<10) | (0x90<<0)),
-	.datawrsratio0		= ((0x50<<10) | (0x50<<0)),
-};
-
-void set_uart_mux_conf(void)
-{
-	/* Set UART pins */
-	enable_uart0_pin_mux();
-}
-
-void set_mux_conf_regs(void)
-{
-	/* Set MMC pins */
-	enable_mmc1_pin_mux();
-
-	/* Set Ethernet pins */
-	enable_enet_pin_mux();
-}
-
-void sdram_init(void)
-{
-	config_dmm(&evm_lisa_map_regs);
-
-	config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data,
-		   &evm_ddr2_emif0_regs, 0);
-	config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data,
-		   &evm_ddr2_emif1_regs, 1);
-}
-#endif
-
-/*
- * Basic board specific setup.  Pinmux has been handled already.
- */
-int board_init(void)
-{
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-	return 0;
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
-	omap_mmc_init(1, 0, 0, -1, -1);
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-static void cpsw_control(int enabled)
-{
-	/* VTP can be added here */
-
-	return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-	{
-		.slave_reg_ofs	= 0x50,
-		.sliver_reg_ofs	= 0x700,
-		.phy_addr	= 1,
-	},
-	{
-		.slave_reg_ofs	= 0x90,
-		.sliver_reg_ofs	= 0x740,
-		.phy_addr	= 0,
-	},
-};
-
-static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= CPSW_MDIO_BASE,
-	.cpsw_base		= CPSW_BASE,
-	.mdio_div		= 0xff,
-	.channels		= 8,
-	.cpdma_reg_ofs		= 0x100,
-	.slaves			= 1,
-	.slave_data		= cpsw_slaves,
-	.ale_reg_ofs		= 0x600,
-	.ale_entries		= 1024,
-	.host_port_reg_ofs	= 0x28,
-	.hw_stats_reg_ofs	= 0x400,
-	.bd_ram_ofs		= 0x2000,
-	.mac_control		= (1 << 5),
-	.control		= cpsw_control,
-	.host_port_num		= 0,
-	.version		= CPSW_CTRL_VERSION_1,
-};
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-	uint8_t mac_addr[6];
-	uint32_t mac_hi, mac_lo;
-
-	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
-		printf("<ethaddr> not set. Reading from E-fuse\n");
-		/* try reading mac address from efuse */
-		mac_lo = readl(&cdev->macid0l);
-		mac_hi = readl(&cdev->macid0h);
-		mac_addr[0] = mac_hi & 0xFF;
-		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-		mac_addr[4] = mac_lo & 0xFF;
-		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-		if (is_valid_ethaddr(mac_addr))
-			eth_env_set_enetaddr("ethaddr", mac_addr);
-		else
-			printf("Unable to read MAC address. Set <ethaddr>\n");
-	}
-
-	return cpsw_register(&cpsw_data);
-}
diff --git a/board/ti/ti814x/evm.h b/board/ti/ti814x/evm.h
deleted file mode 100644
index 6aebec6..0000000
--- a/board/ti/ti814x/evm.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _EVM_H
-#define _EVM_H
-
-void enable_uart0_pin_mux(void);
-void enable_mmc1_pin_mux(void);
-void enable_enet_pin_mux(void);
-
-#endif /* _EVM_H */
diff --git a/board/ti/ti814x/mux.c b/board/ti/ti814x/mux.c
deleted file mode 100644
index fd9f364..0000000
--- a/board/ti/ti814x/mux.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * mux.c
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include "evm.h"
-
-static struct module_pin_mux uart0_pin_mux[] = {
-	{OFFSET(pincntl70), PULLUP_EN | MODE(0x01)},	/* UART0_RXD */
-	{OFFSET(pincntl71), PULLUP_EN | MODE(0x01)},	/* UART0_TXD */
-	{-1},
-};
-
-static struct module_pin_mux mmc1_pin_mux[] = {
-	{OFFSET(pincntl1), PULLUP_EN | MODE(0x01)},	/* SD1_CLK */
-	{OFFSET(pincntl2), PULLUP_EN | MODE(0x01)},	/* SD1_CMD */
-	{OFFSET(pincntl3), PULLUP_EN | MODE(0x01)},	/* SD1_DAT[0] */
-	{OFFSET(pincntl4), PULLUP_EN | MODE(0x01)},	/* SD1_DAT[1] */
-	{OFFSET(pincntl5), PULLUP_EN | MODE(0x01)},	/* SD1_DAT[2] */
-	{OFFSET(pincntl6), PULLUP_EN | MODE(0x01)},	/* SD1_DAT[3] */
-	{OFFSET(pincntl74), PULLUP_EN | MODE(0x40)},	/* SD1_POW */
-	{OFFSET(pincntl75), MODE(0x40)},		/* SD1_SDWP */
-	{OFFSET(pincntl80), PULLUP_EN | MODE(0x02)},	/* SD1_SDCD */
-	{-1},
-};
-
-static struct module_pin_mux enet_pin_mux[] = {
-	{OFFSET(pincntl232), MODE(0x01)},		/* EMAC_RMREFCLK */
-	{OFFSET(pincntl233), PULLUP_EN | MODE(0x01)},	/* MDCLK */
-	{OFFSET(pincntl234), PULLUP_EN | MODE(0x01)},	/* MDIO */
-	{OFFSET(pincntl235), MODE(0x01)},		/* EMAC[0]_MTCLK */
-	{OFFSET(pincntl236), MODE(0x01)},		/* EMAC[0]_MCOL */
-	{OFFSET(pincntl237), MODE(0x01)},		/* EMAC[0]_MCRS */
-	{OFFSET(pincntl238), MODE(0x01)},		/* EMAC[0]_MRXER */
-	{OFFSET(pincntl239), MODE(0x01)},		/* EMAC[0]_MRCLK */
-	{OFFSET(pincntl240), MODE(0x01)},		/* EMAC[0]_MRXD[0] */
-	{OFFSET(pincntl241), MODE(0x01)},		/* EMAC[0]_MRXD[1] */
-	{OFFSET(pincntl242), MODE(0x01)},		/* EMAC[0]_MRXD[2] */
-	{OFFSET(pincntl243), MODE(0x01)},		/* EMAC[0]_MRXD[3] */
-	{OFFSET(pincntl244), MODE(0x01)},		/* EMAC[0]_MRXD[4] */
-	{OFFSET(pincntl245), MODE(0x01)},		/* EMAC[0]_MRXD[5] */
-	{OFFSET(pincntl246), MODE(0x01)},		/* EMAC[0]_MRXD[6] */
-	{OFFSET(pincntl247), MODE(0x01)},		/* EMAC[0]_MRXD[7] */
-	{OFFSET(pincntl248), MODE(0x01)},		/* EMAC[0]_MRXDV */
-	{OFFSET(pincntl249), MODE(0x01)},		/* EMAC[0]_GMTCLK */
-	{OFFSET(pincntl250), MODE(0x01)},		/* EMAC[0]_MTXD[0] */
-	{OFFSET(pincntl251), MODE(0x01)},		/* EMAC[0]_MTXD[1] */
-	{OFFSET(pincntl252), MODE(0x01)},		/* EMAC[0]_MTXD[2] */
-	{OFFSET(pincntl253), MODE(0x01)},		/* EMAC[0]_MTXD[3] */
-	{OFFSET(pincntl254), MODE(0x01)},		/* EMAC[0]_MTXD[4] */
-	{OFFSET(pincntl255), MODE(0x01)},		/* EMAC[0]_MTXD[5] */
-	{OFFSET(pincntl256), MODE(0x01)},		/* EMAC[0]_MTXD[6] */
-	{OFFSET(pincntl257), MODE(0x01)},		/* EMAC[0]_MTXD[7] */
-	{OFFSET(pincntl258), MODE(0x01)},		/* EMAC[0]_MTXEN */
-};
-
-void enable_uart0_pin_mux(void)
-{
-	configure_module_pin_mux(uart0_pin_mux);
-}
-
-void enable_mmc1_pin_mux(void)
-{
-	configure_module_pin_mux(mmc1_pin_mux);
-}
-
-void enable_enet_pin_mux(void)
-{
-	configure_module_pin_mux(enet_pin_mux);
-}