global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

5 files changed, 13 insertions, 13 deletions

diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index 85025f2..2efede6 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -85,7 +85,7 @@ int board_init(void)
 #ifdef CONFIG_MACH_TYPE
 	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
 #endif
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
 
 #ifdef CONFIG_FACTORYSET
 	factoryset_read_eeprom(FACTORYSET_EEPROM_ADDR);
diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index d876280..569b86d 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -262,7 +262,7 @@ void at91_udp_hw_init(void)
 int board_init(void)
 {
 	/* address of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
 
 	/* we have to request the gpios again after relocation */
 	corvus_request_gpio();
@@ -287,8 +287,8 @@ int board_init(void)
 
 int dram_init(void)
 {
-	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
-				    CONFIG_SYS_SDRAM_SIZE);
+	gd->ram_size = get_ram_size((void *)CFG_SYS_SDRAM_BASE,
+				    CFG_SYS_SDRAM_SIZE);
 	return 0;
 }
 
diff --git a/board/siemens/iot2050/board.c b/board/siemens/iot2050/board.c
index b965ae9..8f4b0ea 100644
--- a/board/siemens/iot2050/board.c
+++ b/board/siemens/iot2050/board.c
@@ -146,7 +146,7 @@ int dram_init_banksize(void)
 	dram_init();
 
 	/* Bank 0 declares the memory available in the DDR low region */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
 	gd->bd->bi_dram[0].size = gd->ram_size;
 
 	/* Bank 1 declares the memory available in the DDR high region */
diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c
index ce6c877..3d0f734 100644
--- a/board/siemens/smartweb/smartweb.c
+++ b/board/siemens/smartweb/smartweb.c
@@ -167,7 +167,7 @@ int board_init(void)
 #endif
 
 	/* Adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
 
 	smartweb_nand_hw_init();
 	smartweb_macb_hw_init();
@@ -177,8 +177,8 @@ int board_init(void)
 int dram_init(void)
 {
 	gd->ram_size = get_ram_size(
-		(void *)CONFIG_SYS_SDRAM_BASE,
-		CONFIG_SYS_SDRAM_SIZE);
+		(void *)CFG_SYS_SDRAM_BASE,
+		CFG_SYS_SDRAM_SIZE);
 	return 0;
 }
 
diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c
index 47d3f6a..1eee972 100644
--- a/board/siemens/taurus/taurus.c
+++ b/board/siemens/taurus/taurus.c
@@ -185,8 +185,8 @@ void mem_init(void)
 	sdramc_configure(AT91_SDRAMC_NC_10);
 
 	/* Do memtest for 128MB */
-	ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
-				CONFIG_SYS_SDRAM_SIZE);
+	ram_size = get_ram_size((void *)CFG_SYS_SDRAM_BASE,
+				CFG_SYS_SDRAM_SIZE);
 
 	/*
 	 * If 32MB or 16MB should be supported check also for
@@ -306,7 +306,7 @@ struct at91_udc_data board_udc_data  = {
 int board_init(void)
 {
 	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
 
 	taurus_request_gpio();
 #ifdef CONFIG_CMD_NAND
@@ -326,8 +326,8 @@ int board_init(void)
 
 int dram_init(void)
 {
-	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
-				    CONFIG_SYS_SDRAM_SIZE);
+	gd->ram_size = get_ram_size((void *)CFG_SYS_SDRAM_BASE,
+				    CFG_SYS_SDRAM_SIZE);
 	return 0;
 }