powerpc: remove 4xx support

There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 197 deletions

diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S
deleted file mode 100644
index 292393e..0000000
--- a/board/mpl/pip405/init.S
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0	IBM-pibs
- */
-/*-----------------------------------------------------------------------------
- * Function:     ext_bus_cntlr_init
- * Description:  Initializes the External Bus Controller for the external
- *		peripherals. IMPORTANT: For pass1 this code must run from
- *		cache since you can not reliably change a peripheral banks
- *		timing register (pbxap) while running code from that bank.
- *		For ex., since we are running from ROM on bank 0, we can NOT
- *		execute the code that modifies bank 0 timings from ROM, so
- *		we run it from cache.
- *	Bank 0 - Flash or Multi Purpose Socket
- *	Bank 1 - Multi Purpose Socket or Flash
- *	Bank 2 - not used
- *	Bank 3 - not used
- *	Bank 4 - not used
- *	Bank 5 - not used
- *	Bank 6 - used to switch on the 12V for the Multipurpose socket
- *	Bank 7 - Config Register
- *-----------------------------------------------------------------------------*/
-
-#include <configs/PIP405.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx.h>
-#include "pip405.h"
-
-  .globl ext_bus_cntlr_init
- ext_bus_cntlr_init:
-  mflr   r4                      /* save link register */
-  mfdcr  r3,CPC0_PSR                /* get strapping reg */
-  andi.  r0, r3, PSR_ROM_LOC     /* mask out irrelevant bits */
-  bnelr                          /* jump back if PCI boot */
-
-  bl      ..getAddr
-..getAddr:
-  mflr    r3                      /* get address of ..getAddr */
-  mtlr    r4                      /* restore link register */
-  addi    r4,0,14                 /* set ctr to 14; used to prefetch */
-  mtctr   r4                      /* 14 cache lines to fit this function */
-				   /* in cache (gives us 8x14=112 instrctns) */
-..ebcloop:
-  icbt    r0,r3                   /* prefetch cache line for addr in r3 */
-  addi    r3,r3,32								/* move to next cache line */
-  bdnz    ..ebcloop               /* continue for 14 cache lines */
-
-   /*-------------------------------------------------------------------
-    * Delay to ensure all accesses to ROM are complete before changing
-    * bank 0 timings.
-    *------------------------------------------------------------------- */
-	addis	r3,0,0x0
-  ori     r3,r3,0xA000
-  mtctr   r3
-..spinlp:
-  bdnz    ..spinlp                /* spin loop */
-
-	/*-----------------------------------------------------------------------
-	 * decide boot up mode
-	 *----------------------------------------------------------------------- */
-	addi		r4,0,PB0CR
-	mtdcr		EBC0_CFGADDR,r4
-	mfdcr		r4,EBC0_CFGDATA
-
-	andi.		r0, r4, 0x2000			/* mask out irrelevant bits */
-	beq		0f				/* jump if 8 bit bus width */
-
-	/* setup 16 bit things
-   *-----------------------------------------------------------------------
-   * Memory Bank 0 (16 Bit Flash) initialization
-   *---------------------------------------------------------------------- */
-
-	addi    r4,0,PB1AP
-	mtdcr   EBC0_CFGADDR,r4
-	addis   r4,0,(FLASH_AP_B)@h
-	ori     r4,r4,(FLASH_AP_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-
-	addi    r4,0,PB0CR
-	mtdcr   EBC0_CFGADDR,r4
-	/* BS=0x010(4MB),BU=0x3(R/W), */
-	addis   r4,0,(FLASH_CR_B)@h
-	ori     r4,r4,(FLASH_CR_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-	b				1f
-
-0:
-	/* 8Bit boot mode: */
-	/*-----------------------------------------------------------------------
-	* Memory Bank 0 Multi Purpose Socket initialization
-	*----------------------------------------------------------------------- */
-	/* 0x7F8FFE80 slowest boot */
-	addi    r4,0,PB1AP
-	mtdcr   EBC0_CFGADDR,r4
-	addis   r4,0,(MPS_AP_B)@h
-	ori     r4,r4,(MPS_AP_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-
-	addi    r4,0,PB0CR
-	mtdcr   EBC0_CFGADDR,r4
-	/* BS=0x010(4MB),BU=0x3(R/W), */
-	addis   r4,0,(MPS_CR_B)@h
-	ori     r4,r4,(MPS_CR_B)@l
-	mtdcr   EBC0_CFGDATA,r4
-
-
-1:
-  /*-----------------------------------------------------------------------
-   * Memory Bank 2-3-4-5-6 (not used) initialization
-   *-----------------------------------------------------------------------*/
-  addi    r4,0,PB1CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB2CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB3CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB4CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB5CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB6CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-
-  addi    r4,0,PB7CR
-  mtdcr   EBC0_CFGADDR,r4
-  addis   r4,0,0x0000
-  ori     r4,r4,0x0000
-  mtdcr   EBC0_CFGDATA,r4
-  nop				/* pass2 DCR errata #8 */
-  blr
-
-#if defined(CONFIG_BOOT_PCI)
-    .section .bootpg,"ax"
-    .globl _start_pci
-/*******************************************
- */
-
-_start_pci:
-  /* first handle errata #68 / PCI_18 */
-  iccci   r0, r0          /* invalidate I-cache */
-  lis     r31, 0
-  mticcr  r31             /* ICCR = 0 (all uncachable) */
-  isync
-
-  mfccr0  r28             /* set CCR0[24] = 1 */
-  ori     r28, r28, 0x0080
-  mtccr0  r28
-
-  /* setup PMM0MA (0xEF400004) and PMM0PCIHA (0xEF40000C) */
-  lis     r28, 0xEF40
-  addi    r28, r28, 0x0004
-  stw     r31, 0x0C(r28)  /* clear PMM0PCIHA */
-  lis     r29, 0xFFF8     /* open 512 kByte */
-  addi    r29, r29, 0x0001/* and enable this region */
-  stwbrx  r29, r0, r28    /* write PMM0MA */
-
-  lis     r28, 0xEEC0     /* address of PCIC0_CFGADDR */
-  addi    r29, r28, 4     /* add 4 to r29 -> PCIC0_CFGDATA */
-
-  lis     r31, 0x8000     /* set en bit bus 0 */
-  ori     r31, r31, 0x304C/* device 6 func 0 reg 4C (XBCS register) */
-  stwbrx  r31, r0, r28    /* write it */
-
-  lwbrx   r31, r0, r29    /* load XBCS register */
-  oris    r31, r31, 0x02C4/* clear BIOSCS WPE, set lower, extended and 1M extended BIOS enable */
-  stwbrx  r31, r0, r29    /* write back XBCS register */
-
-  nop
-  nop
-  b	_start		/* normal start */
-#endif