aboutsummaryrefslogtreecommitdiff
path: root/board/ml2
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-03 00:38:21 +0000
committerwdenk <wdenk>2002-11-03 00:38:21 +0000
commitfe8c2806cdba70479e351299881a395dc2be7785 (patch)
treea1e8b98a1838cba6e6f5c765d9d85339257c45f5 /board/ml2
parentf9087a3213cc245cf9b90436475b5af822bd7579 (diff)
downloadu-boot-fe8c2806cdba70479e351299881a395dc2be7785.zip
u-boot-fe8c2806cdba70479e351299881a395dc2be7785.tar.gz
u-boot-fe8c2806cdba70479e351299881a395dc2be7785.tar.bz2
Initial revision
Diffstat (limited to 'board/ml2')
-rw-r--r--board/ml2/flash.c301
-rw-r--r--board/ml2/init.S34
-rw-r--r--board/ml2/ml2.c67
3 files changed, 402 insertions, 0 deletions
diff --git a/board/ml2/flash.c b/board/ml2/flash.c
new file mode 100644
index 0000000..77e0931
--- /dev/null
+++ b/board/ml2/flash.c
@@ -0,0 +1,301 @@
+/*
+ * flash.c: Support code for the flash chips on the Xilinx ML2 board
+ *
+ * Copyright 2002 Mind NV
+ *
+ * http://www.mind.be/
+ *
+ * Author : Peter De Schrijver (p2@mind.be)
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL) version 2, incorporated herein by
+ * reference. Drivers based on or derived from this code fall under the GPL
+ * and must retain the authorship, copyright and this license notice. This
+ * file is not a complete program and may only be used when the entire program
+ * is licensed under the GPL.
+ *
+ */
+
+#include <common.h>
+#include <asm/u-boot.h>
+#include <configs/ML2.h>
+
+#define FLASH_BANK_SIZE (64*1024*1024)
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+#define SECT_SIZE (512*1024)
+
+#define CMD_READ_ARRAY 0x00FF00FF00FF00FULL
+#define CMD_IDENTIFY 0x0090009000900090ULL
+#define CMD_ERASE_SETUP 0x0020002000200020ULL
+#define CMD_ERASE_CONFIRM 0x00D000D000D000D0ULL
+#define CMD_PROGRAM 0x0040004000400040ULL
+#define CMD_RESUME 0x00D000D000D000D0ULL
+#define CMD_SUSPEND 0x00B000B000B000B0ULL
+#define CMD_STATUS_READ 0x0070007000700070ULL
+#define CMD_STATUS_RESET 0x0050005000500050ULL
+
+#define BIT_BUSY 0x0080008000800080ULL
+#define BIT_ERASE_SUSPEND 0x004000400400040ULL
+#define BIT_ERASE_ERROR 0x0020002000200020ULL
+#define BIT_PROGRAM_ERROR 0x0010001000100010ULL
+#define BIT_VPP_RANGE_ERROR 0x0008000800080008ULL
+#define BIT_PROGRAM_SUSPEND 0x0004000400040004ULL
+#define BIT_PROTECT_ERROR 0x0002000200020002ULL
+#define BIT_UNDEFINED 0x0001000100010001ULL
+
+#define BIT_SEQUENCE_ERROR 0x0030003000300030ULL
+
+#define BIT_TIMEOUT 0x80000000
+
+
+inline void eieio(void) {
+
+ __asm__ __volatile__ ("eieio" : : : "memory");
+
+}
+
+ulong flash_init(void) {
+
+ int i, j;
+ ulong size = 0;
+
+ for(i=0;i<CFG_MAX_FLASH_BANKS;i++) {
+ ulong flashbase = 0;
+
+ flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F128J3A & FLASH_TYPEMASK);
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ if (i==0)
+ flashbase = CFG_FLASH_BASE;
+ else
+ panic("configured to many flash banks!\n");
+ for (j = 0; j < flash_info[i].sector_count; j++)
+ flash_info[i].start[j]=flashbase + j * SECT_SIZE;
+
+ size += flash_info[i].size;
+ }
+
+ return size;
+}
+
+void flash_print_info (flash_info_t *info) {
+
+ int i;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (INTEL_MANUFACT & FLASH_VENDMASK):
+ printf("Intel: ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (INTEL_ID_28F128J3A & FLASH_TYPEMASK):
+ printf("4x 28F128J3A (128Mbit)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ break;
+ }
+
+ printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+}
+
+int flash_error (unsigned long long code) {
+
+ if (code & BIT_TIMEOUT) {
+ printf ("Timeout\n");
+ return ERR_TIMOUT;
+ }
+
+ if (~code & BIT_BUSY) {
+ printf ("Busy\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_VPP_RANGE_ERROR) {
+ printf ("Vpp range error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_PROTECT_ERROR) {
+ printf ("Device protect error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_SEQUENCE_ERROR) {
+ printf ("Command seqence error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_ERASE_ERROR) {
+ printf ("Block erase error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_PROGRAM_ERROR) {
+ printf ("Program error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_ERASE_SUSPEND) {
+ printf ("Block erase suspended\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_PROGRAM_SUSPEND) {
+ printf ("Program suspended\n");
+ return ERR_PROG_ERROR;
+ }
+
+ return ERR_OK;
+
+}
+
+int flash_erase (flash_info_t *info, int s_first, int s_last) {
+
+ int rc = ERR_OK;
+ int sect;
+ unsigned long long result;
+
+ if (info->flash_id == FLASH_UNKNOWN)
+ return ERR_UNKNOWN_FLASH_TYPE;
+
+ if ((s_first < 0) || (s_first > s_last))
+ return ERR_INVAL;
+
+ if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
+ return ERR_UNKNOWN_FLASH_VENDOR;
+
+ for (sect=s_first; sect<=s_last; ++sect)
+ if (info->protect[sect])
+ return ERR_PROTECTED;
+
+ for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+ volatile unsigned long long *addr=
+ (unsigned long long *)(info->start[sect]);
+
+ printf("Erasing sector %2d ... ", sect);
+
+ *addr=CMD_STATUS_RESET;
+ eieio();
+ *addr=CMD_ERASE_SETUP;
+ eieio();
+ *addr=CMD_ERASE_CONFIRM;
+ eieio();
+
+ do {
+ result = *addr;
+ } while(~result & BIT_BUSY);
+
+ *addr=CMD_READ_ARRAY;
+
+ if ((rc = flash_error(result)) == ERR_OK)
+ printf("ok.\n");
+ else
+ break;
+ }
+
+ if (ctrlc())
+ printf("User Interrupt!\n");
+
+ return rc;
+}
+
+volatile static int write_word (flash_info_t *info, ulong dest, unsigned long long data) {
+
+ volatile unsigned long long *addr=(unsigned long long *)dest;
+ unsigned long long result;
+ int rc = ERR_OK;
+
+ result=*addr;
+ if ((result & data) != data)
+ return ERR_NOT_ERASED;
+
+ *addr=CMD_STATUS_RESET;
+ eieio();
+ *addr=CMD_PROGRAM;
+ eieio();
+ *addr=data;
+ eieio();
+
+ do {
+ result=*addr;
+ } while(~result & BIT_BUSY);
+
+ *addr=CMD_READ_ARRAY;
+
+ rc = flash_error(result);
+
+ return rc;
+
+}
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
+
+ ulong cp, wp;
+ unsigned long long data;
+ int l;
+ int i,rc;
+
+ wp=(addr & ~7);
+
+ if((l=addr-wp) != 0) {
+ data=0;
+ for(i=0,cp=wp;i<l;++i,++cp)
+ data = (data >> 8) | (*(uchar *)cp << 24);
+
+ for (; i<8 && cnt>0; ++i) {
+ data = (data >> 8) | (*src++ << 24);
+ --cnt;
+ ++cp;
+ }
+
+ for (; i<8; ++i, ++cp)
+ data = (data >> 8) | (*(uchar *)cp << 24);
+
+ if ((rc = write_word(info, wp, data)) != 0)
+ return rc;
+
+ wp+=8;
+ }
+
+ while(cnt>=8) {
+ data=*((unsigned long long *)src);
+ if ((rc = write_word(info, wp, data)) != 0)
+ return rc;
+ src+=8;
+ wp+=8;
+ cnt-=8;
+ }
+
+ if(cnt == 0)
+ return ERR_OK;
+
+ data = 0;
+ for (i=0, cp=wp; i<8 && cnt>0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 24);
+ --cnt;
+ }
+ for (; i<8; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *)cp << 24);
+ }
+
+ return write_word(info, wp, data);
+
+}
+
diff --git a/board/ml2/init.S b/board/ml2/init.S
new file mode 100644
index 0000000..2386c2a
--- /dev/null
+++ b/board/ml2/init.S
@@ -0,0 +1,34 @@
+/*
+ * init.S: Stubs for U-Boot initialization
+ *
+ * Copyright 2002 Mind NV
+ *
+ * http://www.mind.be/
+ *
+ * Author : Peter De Schrijver (p2@mind.be)
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL) version 2, incorporated herein by
+ * reference. Drivers based on or derived from this code fall under the GPL
+ * and must retain the authorship, copyright and this license notice. This
+ * file is not a complete program and may only be used when the entire
+ * program is licensed under the GPL.
+ *
+ */
+
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+
+ .globl ext_bus_cntlr_init
+ext_bus_cntlr_init:
+ blr
+
+ .globl sdram_init
+sdram_init:
+ blr
diff --git a/board/ml2/ml2.c b/board/ml2/ml2.c
new file mode 100644
index 0000000..a89a8f9
--- /dev/null
+++ b/board/ml2/ml2.c
@@ -0,0 +1,67 @@
+/*
+ * ml2.c: U-Boot platform support for Xilinx ML2 board
+ *
+ * Copyright 2002 Mind NV
+ *
+ * http://www.mind.be/
+ *
+ * Author : Peter De Schrijver (p2@mind.be)
+ *
+ * Derived from : Other platform support files in this tree
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL) version 2, incorporated herein by
+ * reference. Drivers based on or derived from this code fall under the GPL
+ * and must retain the authorship, copyright and this license notice. This
+ * file is not a complete program and may only be used when the entire
+ * program is licensed under the GPL.
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+
+
+int board_pre_init (void)
+{
+ return 0;
+}
+
+
+int checkboard (void)
+{
+ unsigned char *s = getenv ("serial#");
+ unsigned char *e;
+
+ if (!s || strncmp (s, "ML2", 9)) {
+ printf ("### No HW ID - assuming ML2");
+ } else {
+ for (e = s; *e; ++e) {
+ if (*e == ' ')
+ break;
+ }
+
+ for (; s < e; ++s) {
+ putc (*s);
+ }
+ }
+
+
+ putc ('\n');
+
+ return (0);
+}
+
+
+long int initdram (int board_type)
+{
+ return 32 * 1024 * 1024;
+}
+
+int testdram (void)
+{
+ printf ("test: xxx MB - ok\n");
+
+ return (0);
+}