board: ge: bx50v3, imx53ppd: use DM I2C

Remove old (pre-DM) i2c setup code.
Enable DM i2c.
Convert common code to use DM rtc.
Convert common code to read VPD from eeprom partition.
Convert the generic i2c PMIC init code to use the new da9063 driver.

mx53ppd only:
Correct RTC compatible in device tree.
Enable MXC DM i2c driver.
Define CONFIG_SYS_MALLOC_F_LEN so that DM is available in pre-reloc.
Make GPIO banks available during preloc, since initialisation is done
in board_early_init_f().
Add gpio_request() calls to satisfy the DM_GPIO compatibility API.
Remove unused power configuration.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>

8 files changed, 55 insertions, 167 deletions

diff --git a/board/ge/bx50v3/Kconfig b/board/ge/bx50v3/Kconfig
index 0593856..993b055 100644
--- a/board/ge/bx50v3/Kconfig
+++ b/board/ge/bx50v3/Kconfig
@@ -15,6 +15,4 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ge_bx50v3"
 
-source "board/ge/common/Kconfig"
-
 endif
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 89607cf..4a75c7b 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -14,7 +14,6 @@
 #include <linux/errno.h>
 #include <linux/libfdt.h>
 #include <asm/gpio.h>
-#include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
@@ -27,7 +26,8 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
-#include <i2c.h>
+#include <power/regulator.h>
+#include <power/da9063_pmic.h>
 #include <input.h>
 #include <pwm.h>
 #include <version.h>
@@ -85,45 +85,6 @@ static iomux_v3_cfg_t const uart4_pads[] = {
 	MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
-static struct i2c_pads_info i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | I2C_PAD,
-		.gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | I2C_PAD,
-		.gp = IMX_GPIO_NR(5, 27)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | I2C_PAD,
-		.gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | I2C_PAD,
-		.gp = IMX_GPIO_NR(5, 26)
-	}
-};
-
-static struct i2c_pads_info i2c_pad_info2 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
-		.gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 12)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
-		.gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 13)
-	}
-};
-
-static struct i2c_pads_info i2c_pad_info3 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | I2C_PAD,
-		.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | I2C_PAD,
-		.gp = IMX_GPIO_NR(1, 3)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | I2C_PAD,
-		.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | I2C_PAD,
-		.gp = IMX_GPIO_NR(1, 6)
-	}
-};
-
 static void setup_iomux_uart(void)
 {
 	imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
@@ -491,10 +452,6 @@ static void set_confidx(const struct vpd_cache* vpd)
 
 int board_init(void)
 {
-	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
-	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
-
 	if (!read_vpd(&vpd, vpd_callback)) {
 		int ret, rescan;
 
@@ -541,53 +498,26 @@ static const struct boot_mode board_boot_modes[] = {
 
 void pmic_init(void)
 {
-#define I2C_PMIC                0x2
-#define DA9063_I2C_ADDR         0x58
-#define DA9063_REG_BCORE2_CFG   0x9D
-#define DA9063_REG_BCORE1_CFG   0x9E
-#define DA9063_REG_BPRO_CFG     0x9F
-#define DA9063_REG_BIO_CFG      0xA0
-#define DA9063_REG_BMEM_CFG     0xA1
-#define DA9063_REG_BPERI_CFG    0xA2
-#define DA9063_BUCK_MODE_MASK   0xC0
-#define DA9063_BUCK_MODE_MANUAL 0x00
-#define DA9063_BUCK_MODE_SLEEP  0x40
-#define DA9063_BUCK_MODE_SYNC   0x80
-#define DA9063_BUCK_MODE_AUTO   0xC0
-
-	uchar val;
-
-	i2c_set_bus_num(I2C_PMIC);
-
-	i2c_read(DA9063_I2C_ADDR, DA9063_REG_BCORE2_CFG, 1, &val, 1);
-	val &= ~DA9063_BUCK_MODE_MASK;
-	val |= DA9063_BUCK_MODE_SYNC;
-	i2c_write(DA9063_I2C_ADDR, DA9063_REG_BCORE2_CFG, 1, &val, 1);
-
-	i2c_read(DA9063_I2C_ADDR, DA9063_REG_BCORE1_CFG, 1, &val, 1);
-	val &= ~DA9063_BUCK_MODE_MASK;
-	val |= DA9063_BUCK_MODE_SYNC;
-	i2c_write(DA9063_I2C_ADDR, DA9063_REG_BCORE1_CFG, 1, &val, 1);
-
-	i2c_read(DA9063_I2C_ADDR, DA9063_REG_BPRO_CFG, 1, &val, 1);
-	val &= ~DA9063_BUCK_MODE_MASK;
-	val |= DA9063_BUCK_MODE_SYNC;
-	i2c_write(DA9063_I2C_ADDR, DA9063_REG_BPRO_CFG, 1, &val, 1);
-
-	i2c_read(DA9063_I2C_ADDR, DA9063_REG_BIO_CFG, 1, &val, 1);
-	val &= ~DA9063_BUCK_MODE_MASK;
-	val |= DA9063_BUCK_MODE_SYNC;
-	i2c_write(DA9063_I2C_ADDR, DA9063_REG_BIO_CFG, 1, &val, 1);
-
-	i2c_read(DA9063_I2C_ADDR, DA9063_REG_BMEM_CFG, 1, &val, 1);
-	val &= ~DA9063_BUCK_MODE_MASK;
-	val |= DA9063_BUCK_MODE_SYNC;
-	i2c_write(DA9063_I2C_ADDR, DA9063_REG_BMEM_CFG, 1, &val, 1);
-
-	i2c_read(DA9063_I2C_ADDR, DA9063_REG_BPERI_CFG, 1, &val, 1);
-	val &= ~DA9063_BUCK_MODE_MASK;
-	val |= DA9063_BUCK_MODE_SYNC;
-	i2c_write(DA9063_I2C_ADDR, DA9063_REG_BPERI_CFG, 1, &val, 1);
+	struct udevice *reg;
+	int ret, i;
+	static const char * const bucks[] = {
+		"bcore1",
+		"bcore2",
+		"bpro",
+		"bmem",
+		"bio",
+		"bperi",
+	};
+
+	for (i = 0; i < ARRAY_SIZE(bucks); i++) {
+		ret = regulator_get_by_devname(bucks[i], &reg);
+		if (reg < 0) {
+			printf("%s(): Unable to get regulator %s: %d\n",
+			       __func__, bucks[i], ret);
+			continue;
+		}
+		regulator_set_mode(reg, DA9063_BUCKMODE_SYNC);
+	}
 }
 
 int board_late_init(void)
diff --git a/board/ge/common/Kconfig b/board/ge/common/Kconfig
deleted file mode 100644
index 637b264..0000000
--- a/board/ge/common/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-config SYS_VPD_EEPROM_I2C_ADDR
-	hex "I2C address of the EEPROM device used for VPD"
-	help
-	  VPD = Vital Product Data
-
-config SYS_VPD_EEPROM_I2C_BUS
-	int "I2C bus of the EEPROM device used for VPD."
-
-config SYS_VPD_EEPROM_SIZE
-	int "Size in bytes of the EEPROM device used for VPD"
-
-config SYS_VPD_EEPROM_I2C_ADDR_LEN
-	int "Number of bytes to use for VPD EEPROM address"
-	default 1
diff --git a/board/ge/common/ge_common.c b/board/ge/common/ge_common.c
index d7e21de..48c3778 100644
--- a/board/ge/common/ge_common.c
+++ b/board/ge/common/ge_common.c
@@ -5,27 +5,24 @@
 
 #include <common.h>
 #include <env.h>
-#include <i2c.h>
+#include <dm/uclass.h>
 #include <rtc.h>
 
 void check_time(void)
 {
+	struct udevice *dev;
 	int ret, i;
 	struct rtc_time tm;
 	u8 retry = 3;
 
-	unsigned int current_i2c_bus = i2c_get_bus_num();
-
-	ret = i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
-	if (ret < 0) {
+	ret = uclass_get_device(UCLASS_RTC, 0, &dev);
+	if (ret) {
 		env_set("rtc_status", "FAIL");
 		return;
 	}
 
-	rtc_init();
-
 	for (i = 0; i < retry; i++) {
-		ret = rtc_get(&tm);
+		ret = dm_rtc_get(dev, &tm);
 		if (!ret || ret == -EINVAL)
 			break;
 	}
@@ -40,7 +37,7 @@ void check_time(void)
 		tm.tm_year = 2036;
 
 		for (i = 0; i < retry; i++) {
-			ret = rtc_set(&tm);
+			ret = dm_rtc_set(dev, &tm);
 			if (!ret)
 				break;
 		}
@@ -55,7 +52,5 @@ void check_time(void)
 		env_set("rtc_status", "2038");
 	else
 		env_set("rtc_status", "OK");
-
-	i2c_set_bus_num(current_i2c_bus);
 }
 
diff --git a/board/ge/common/vpd_reader.c b/board/ge/common/vpd_reader.c
index 12410d9..4df411c 100644
--- a/board/ge/common/vpd_reader.c
+++ b/board/ge/common/vpd_reader.c
@@ -8,6 +8,9 @@
 #include <i2c.h>
 #include <linux/bch.h>
 #include <stdlib.h>
+#include <dm/uclass.h>
+#include <i2c_eeprom.h>
+#include <hexdump.h>
 
 /* BCH configuration */
 
@@ -200,28 +203,34 @@ int read_vpd(struct vpd_cache *cache,
 	     int (*process_block)(struct vpd_cache *, u8 id, u8 version,
 				  u8 type, size_t size, u8 const *data))
 {
-	static const size_t size = CONFIG_SYS_VPD_EEPROM_SIZE;
-
-	int res;
+	struct udevice *dev;
+	int ret;
 	u8 *data;
-	unsigned int current_i2c_bus = i2c_get_bus_num();
+	int size;
+
+	ret = uclass_get_device_by_name(UCLASS_I2C_EEPROM, "vpd", &dev);
+	if (ret)
+		return ret;
 
-	res = i2c_set_bus_num(CONFIG_SYS_VPD_EEPROM_I2C_BUS);
-	if (res < 0)
-		return res;
+	size = i2c_eeprom_size(dev);
+	if (size < 0) {
+		printf("Unable to get size of eeprom: %d\n", ret);
+		return ret;
+	}
 
 	data = malloc(size);
 	if (!data)
 		return -ENOMEM;
 
-	res = i2c_read(CONFIG_SYS_VPD_EEPROM_I2C_ADDR, 0,
-		       CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN,
-		       data, size);
-	if (res == 0)
-		res = vpd_reader(size, data, cache, process_block);
+	ret = i2c_eeprom_read(dev, 0, data, size);
+	if (ret) {
+		free(data);
+		return ret;
+	}
+
+	ret = vpd_reader(size, data, cache, process_block);
 
 	free(data);
 
-	i2c_set_bus_num(current_i2c_bus);
-	return res;
+	return ret;
 }
diff --git a/board/ge/mx53ppd/Kconfig b/board/ge/mx53ppd/Kconfig
index bebb2fa..6dc3818 100644
--- a/board/ge/mx53ppd/Kconfig
+++ b/board/ge/mx53ppd/Kconfig
@@ -13,6 +13,4 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "mx53ppd"
 
-source "board/ge/common/Kconfig"
-
 endif
diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c
index 105edd2..ea3f217 100644
--- a/board/ge/mx53ppd/mx53ppd.c
+++ b/board/ge/mx53ppd/mx53ppd.c
@@ -125,34 +125,6 @@ static void setup_iomux_fec(void)
 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
 }
 
-#define I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
-			 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
-	static const iomux_v3_cfg_t i2c1_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
-}
-
-#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
-
-static struct i2c_pads_info i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX53_PAD_EIM_D21__I2C1_SCL | I2C_PAD,
-		.gpio_mode = MX53_PAD_EIM_D28__GPIO3_28 | I2C_PAD,
-		.gp = IMX_GPIO_NR(3, 28)
-	},
-	.sda = {
-		.i2c_mode = MX53_PAD_EIM_D28__I2C1_SDA | I2C_PAD,
-		.gpio_mode = MX53_PAD_EIM_D21__GPIO3_21 | I2C_PAD,
-		.gp = IMX_GPIO_NR(3, 21)
-	}
-};
-
 static int clock_1GHz(void)
 {
 	int ret;
@@ -182,8 +154,10 @@ void ppd_gpio_init(void)
 	int i;
 
 	imx_iomux_v3_setup_multiple_pads(ppd_pads, ARRAY_SIZE(ppd_pads));
-	for (i = 0; i < ARRAY_SIZE(ppd_gpios); ++i)
+	for (i = 0; i < ARRAY_SIZE(ppd_gpios); ++i) {
+		gpio_request(ppd_gpios[i].gpio, "request");
 		gpio_direction_output(ppd_gpios[i].gpio, ppd_gpios[i].value);
+	}
 }
 
 int board_early_init_f(void)
@@ -256,9 +230,6 @@ int board_init(void)
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
 	mxc_set_sata_internal_clock();
-	setup_iomux_i2c();
-
-	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
 
 	return 0;
 }
diff --git a/board/ge/mx53ppd/mx53ppd_video.c b/board/ge/mx53ppd/mx53ppd_video.c
index 394dcd6..9dd9f0c 100644
--- a/board/ge/mx53ppd/mx53ppd_video.c
+++ b/board/ge/mx53ppd/mx53ppd_video.c
@@ -104,6 +104,7 @@ static void lcd_enable(void)
 	pwm_config(1, 5000000, 5000000);
 
 	/* Backlight Power */
+	gpio_request(BACKLIGHT_ENABLE, "BACKLIGHT_ENABLE");
 	gpio_direction_output(BACKLIGHT_ENABLE, 1);
 
 	pwm_enable(1);