board: gateworks: gw_ventana: move ft_early_fixups out of common

DM is not used for the SPL and a generic DT is used in the SPL
which requires no fixups. Remove the call in the SPL and move the function
into the U-Boot code.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

4 files changed, 146 insertions, 155 deletions

diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 725f948..4144064 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -1209,154 +1209,6 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info)
 	}
 }
 
-#include <fdt_support.h>
-#define WDOG1_ADDR      0x20bc000
-#define WDOG2_ADDR      0x20c0000
-#define GPIO3_ADDR      0x20a4000
-#define USDHC3_ADDR     0x2198000
-
-static void ft_board_wdog_fixup(void *blob, phys_addr_t addr)
-{
-	int off = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", addr);
-
-	if (off) {
-		fdt_delprop(blob, off, "ext-reset-output");
-		fdt_delprop(blob, off, "fsl,ext-reset-output");
-	}
-}
-
-void ft_early_fixup(void *blob, int board_type)
-{
-	struct ventana_board_info *info = &ventana_info;
-	char rev = 0;
-	int i;
-
-	/* determine board revision */
-	for (i = sizeof(ventana_info.model) - 1; i > 0; i--) {
-		if (ventana_info.model[i] >= 'A') {
-			rev = ventana_info.model[i];
-			break;
-		}
-	}
-
-	/*
-	 * Board model specific fixups
-	 */
-	switch (board_type) {
-	case GW51xx:
-		/*
-		 * disable wdog node for GW51xx-A/B to work around
-		 * errata causing wdog timer to be unreliable.
-		 */
-		if (rev >= 'A' && rev < 'C') {
-			i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt",
-							  WDOG1_ADDR);
-			if (i)
-				fdt_status_disabled(blob, i);
-		}
-
-		/* GW51xx-E adds WDOG1_B external reset */
-		if (rev < 'E')
-			ft_board_wdog_fixup(blob, WDOG1_ADDR);
-		break;
-
-	case GW52xx:
-		/* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */
-		if (info->model[4] == '2') {
-			u32 handle = 0;
-			u32 *range = NULL;
-
-			i = fdt_node_offset_by_compatible(blob, -1,
-							  "fsl,imx6q-pcie");
-			if (i)
-				range = (u32 *)fdt_getprop(blob, i,
-							   "reset-gpio", NULL);
-
-			if (range) {
-				i = fdt_node_offset_by_compat_reg(blob,
-					"fsl,imx6q-gpio", GPIO3_ADDR);
-				if (i)
-					handle = fdt_get_phandle(blob, i);
-				if (handle) {
-					range[0] = cpu_to_fdt32(handle);
-					range[1] = cpu_to_fdt32(23);
-				}
-			}
-
-			/* these have broken usd_vsel */
-			if (strstr((const char *)info->model, "SP318-B") ||
-			    strstr((const char *)info->model, "SP331-B"))
-				gpio_cfg[board_type].usd_vsel = 0;
-
-			/* GW522x-B adds WDOG1_B external reset */
-			if (rev < 'B')
-				ft_board_wdog_fixup(blob, WDOG1_ADDR);
-		}
-
-		/* GW520x-E adds WDOG1_B external reset */
-		else if (info->model[4] == '0' && rev < 'E')
-			ft_board_wdog_fixup(blob, WDOG1_ADDR);
-		break;
-
-	case GW53xx:
-		/* GW53xx-E adds WDOG1_B external reset */
-		if (rev < 'E')
-			ft_board_wdog_fixup(blob, WDOG1_ADDR);
-
-		/* GW53xx-G has an adv7280 instead of an adv7180 */
-		else if (rev > 'F') {
-			i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180");
-			if (i) {
-				fdt_setprop_string(blob, i, "compatible", "adi,adv7280");
-				fdt_setprop_empty(blob, i, "adv,force-bt656-4");
-			}
-		}
-		break;
-
-	case GW54xx:
-		/*
-		 * disable serial2 node for GW54xx for compatibility with older
-		 * 3.10.x kernel that improperly had this node enabled in the DT
-		 */
-		fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED);
-
-		/* GW54xx-E adds WDOG2_B external reset */
-		if (rev < 'E')
-			ft_board_wdog_fixup(blob, WDOG2_ADDR);
-
-		/* GW54xx-G has an adv7280 instead of an adv7180 */
-		else if (rev > 'F') {
-			i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180");
-			if (i) {
-				fdt_setprop_string(blob, i, "compatible", "adi,adv7280");
-				fdt_setprop_empty(blob, i, "adv,force-bt656-4");
-			}
-		}
-		break;
-
-	case GW551x:
-		/* GW551x-C adds WDOG1_B external reset */
-		if (rev < 'C')
-			ft_board_wdog_fixup(blob, WDOG1_ADDR);
-		break;
-	case GW5901:
-	case GW5902:
-		/* GW5901/GW5901 revB adds WDOG1_B as an external reset */
-		if (rev < 'B')
-			ft_board_wdog_fixup(blob, WDOG1_ADDR);
-		break;
-	}
-
-	/* remove no-1-8-v if UHS-I support is present */
-	if (gpio_cfg[board_type].usd_vsel) {
-		debug("Enabling UHS-I support\n");
-		i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-usdhc",
-						  USDHC3_ADDR);
-		if (i)
-			fdt_delprop(blob, i, "no-1-8-v");
-	}
-}
-
 #ifdef CONFIG_FSL_ESDHC_IMX
 static struct fsl_esdhc_cfg usdhc_cfg[2];
 
diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h
index a036634..7a60db7 100644
--- a/board/gateworks/gw_ventana/common.h
+++ b/board/gateworks/gw_ventana/common.h
@@ -81,7 +81,5 @@ extern struct ventana gpio_cfg[GW_UNKNOWN];
 
 /* configure gpio iomux/defaults */
 void setup_iomux_gpio(int board, struct ventana_board_info *);
-/* early model/revision ft fixups */
-void ft_early_fixup(void *fdt, int board_type);
 
 #endif /* #ifndef _GWVENTANA_COMMON_H_ */
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 9b8f7b5..8748878 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -1017,6 +1017,152 @@ void ft_board_pci_fixup(void *blob, struct bd_info *bd)
 }
 #endif /* if defined(CONFIG_CMD_PCI) */
 
+#define WDOG1_ADDR      0x20bc000
+#define WDOG2_ADDR      0x20c0000
+#define GPIO3_ADDR      0x20a4000
+#define USDHC3_ADDR     0x2198000
+static void ft_board_wdog_fixup(void *blob, phys_addr_t addr)
+{
+	int off = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", addr);
+
+	if (off) {
+		fdt_delprop(blob, off, "ext-reset-output");
+		fdt_delprop(blob, off, "fsl,ext-reset-output");
+	}
+}
+
+void ft_early_fixup(void *blob, int board_type)
+{
+	struct ventana_board_info *info = &ventana_info;
+	char rev = 0;
+	int i;
+
+	/* determine board revision */
+	for (i = sizeof(ventana_info.model) - 1; i > 0; i--) {
+		if (ventana_info.model[i] >= 'A') {
+			rev = ventana_info.model[i];
+			break;
+		}
+	}
+
+	/*
+	 * Board model specific fixups
+	 */
+	switch (board_type) {
+	case GW51xx:
+		/*
+		 * disable wdog node for GW51xx-A/B to work around
+		 * errata causing wdog timer to be unreliable.
+		 */
+		if (rev >= 'A' && rev < 'C') {
+			i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt",
+							  WDOG1_ADDR);
+			if (i)
+				fdt_status_disabled(blob, i);
+		}
+
+		/* GW51xx-E adds WDOG1_B external reset */
+		if (rev < 'E')
+			ft_board_wdog_fixup(blob, WDOG1_ADDR);
+		break;
+
+	case GW52xx:
+		/* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */
+		if (info->model[4] == '2') {
+			u32 handle = 0;
+			u32 *range = NULL;
+
+			i = fdt_node_offset_by_compatible(blob, -1,
+							  "fsl,imx6q-pcie");
+			if (i)
+				range = (u32 *)fdt_getprop(blob, i,
+							   "reset-gpio", NULL);
+
+			if (range) {
+				i = fdt_node_offset_by_compat_reg(blob,
+								  "fsl,imx6q-gpio", GPIO3_ADDR);
+				if (i)
+					handle = fdt_get_phandle(blob, i);
+				if (handle) {
+					range[0] = cpu_to_fdt32(handle);
+					range[1] = cpu_to_fdt32(23);
+				}
+			}
+
+			/* these have broken usd_vsel */
+			if (strstr((const char *)info->model, "SP318-B") ||
+			    strstr((const char *)info->model, "SP331-B"))
+				gpio_cfg[board_type].usd_vsel = 0;
+
+			/* GW522x-B adds WDOG1_B external reset */
+			if (rev < 'B')
+				ft_board_wdog_fixup(blob, WDOG1_ADDR);
+		}
+
+		/* GW520x-E adds WDOG1_B external reset */
+		else if (info->model[4] == '0' && rev < 'E')
+			ft_board_wdog_fixup(blob, WDOG1_ADDR);
+		break;
+
+	case GW53xx:
+		/* GW53xx-E adds WDOG1_B external reset */
+		if (rev < 'E')
+			ft_board_wdog_fixup(blob, WDOG1_ADDR);
+
+		/* GW53xx-G has an adv7280 instead of an adv7180 */
+		else if (rev > 'F') {
+			i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180");
+			if (i) {
+				fdt_setprop_string(blob, i, "compatible", "adi,adv7280");
+				fdt_setprop_empty(blob, i, "adv,force-bt656-4");
+			}
+		}
+		break;
+
+	case GW54xx:
+		/*
+		 * disable serial2 node for GW54xx for compatibility with older
+		 * 3.10.x kernel that improperly had this node enabled in the DT
+		 */
+		fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED);
+
+		/* GW54xx-E adds WDOG2_B external reset */
+		if (rev < 'E')
+			ft_board_wdog_fixup(blob, WDOG2_ADDR);
+
+		/* GW54xx-G has an adv7280 instead of an adv7180 */
+		else if (rev > 'F') {
+			i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180");
+			if (i) {
+				fdt_setprop_string(blob, i, "compatible", "adi,adv7280");
+				fdt_setprop_empty(blob, i, "adv,force-bt656-4");
+			}
+		}
+		break;
+
+	case GW551x:
+		/* GW551x-C adds WDOG1_B external reset */
+		if (rev < 'C')
+			ft_board_wdog_fixup(blob, WDOG1_ADDR);
+		break;
+	case GW5901:
+	case GW5902:
+		/* GW5901/GW5901 revB adds WDOG1_B as an external reset */
+		if (rev < 'B')
+			ft_board_wdog_fixup(blob, WDOG1_ADDR);
+		break;
+	}
+
+	/* remove no-1-8-v if UHS-I support is present */
+	if (gpio_cfg[board_type].usd_vsel) {
+		debug("Enabling UHS-I support\n");
+		i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-usdhc",
+						  USDHC3_ADDR);
+		if (i)
+			fdt_delprop(blob, i, "no-1-8-v");
+	}
+}
+
 /*
  * called prior to booting kernel or by 'fdt boardsetup' command
  *
diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
index 2d6ef30..3149e88 100644
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -1062,8 +1062,3 @@ int spl_start_uboot(void)
 	return ret;
 }
 #endif
-
-void spl_perform_fixups(struct spl_image_info *spl_image)
-{
-	ft_early_fixup(spl_image->fdt_addr, board_type);
-}