diff options
author | Marek Vasut <marex@denx.de> | 2022-08-17 15:07:14 +0200 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2022-09-01 10:23:44 -0400 |
commit | 7df5793a68fcd6557e9d62d1f42e828aaac60bef (patch) | |
tree | 0bede988ae70ba2ecb535998348997492bb9efa9 /board/dhelectronics/dh_imx6/dh_imx6_spl.c | |
parent | b63574b7699b46015d0373cc46a276489d5f4183 (diff) | |
download | u-boot-WIP/2022-09-01-assorted-Kconfig-migrations.zip u-boot-WIP/2022-09-01-assorted-Kconfig-migrations.tar.gz u-boot-WIP/2022-09-01-assorted-Kconfig-migrations.tar.bz2 |
ARM: imx6: dh-imx6: Enable d-cache early in SPLWIP/2022-09-01-assorted-Kconfig-migrations
Enable d-cache early in SPL right after DRAM is started up.
This reduces U-Boot proper load time by 650ms when loaded
from SPI NOR.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Philip Oberfichtner <pro@denx.de>
Diffstat (limited to 'board/dhelectronics/dh_imx6/dh_imx6_spl.c')
-rw-r--r-- | board/dhelectronics/dh_imx6/dh_imx6_spl.c | 41 |
1 files changed, 41 insertions, 0 deletions
diff --git a/board/dhelectronics/dh_imx6/dh_imx6_spl.c b/board/dhelectronics/dh_imx6/dh_imx6_spl.c index e49e977..20a330c 100644 --- a/board/dhelectronics/dh_imx6/dh_imx6_spl.c +++ b/board/dhelectronics/dh_imx6/dh_imx6_spl.c @@ -6,6 +6,7 @@ */ #include <common.h> +#include <cpu_func.h> #include <init.h> #include <asm/arch/clock.h> #include <asm/arch/crm_regs.h> @@ -14,11 +15,13 @@ #include <asm/arch/mx6-ddr.h> #include <asm/arch/mx6-pins.h> #include <asm/arch/sys_proto.h> +#include <asm/cache.h> #include <asm/gpio.h> #include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/iomux-v3.h> #include <asm/mach-imx/mxc_i2c.h> #include <asm/io.h> +#include <asm/system.h> #include <errno.h> #include <fuse.h> #include <fsl_esdhc_imx.h> @@ -610,6 +613,20 @@ static void dhcom_spl_dram_init(void) } } +void dram_bank_mmu_setup(int bank) +{ + int i; + + set_section_dcache(ROMCP_ARB_BASE_ADDR >> MMU_SECTION_SHIFT, DCACHE_DEFAULT_OPTION); + set_section_dcache(IRAM_BASE_ADDR >> MMU_SECTION_SHIFT, DCACHE_DEFAULT_OPTION); + + for (i = MMDC0_ARB_BASE_ADDR >> MMU_SECTION_SHIFT; + i < ((MMDC0_ARB_BASE_ADDR >> MMU_SECTION_SHIFT) + + (SZ_1G >> MMU_SECTION_SHIFT)); + i++) + set_section_dcache(i, DCACHE_DEFAULT_OPTION); +} + void board_init_f(ulong dummy) { /* setup AIPS and disable watchdog */ @@ -636,9 +653,33 @@ void board_init_f(ulong dummy) /* DDR3 initialization */ dhcom_spl_dram_init(); + /* Set up early MMU tables at the beginning of DRAM and start d-cache */ + gd->arch.tlb_addr = MMDC0_ARB_BASE_ADDR + SZ_32M; + gd->arch.tlb_size = PGTABLE_SIZE; + enable_caches(); + /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start); /* load/boot image from boot device */ board_init_r(NULL, 0); } + +void spl_board_prepare_for_boot(void) +{ + /* + * Flush and disable dcache. Without it, the following bootstage might fail randomly because + * dirty cache lines may not have been written back to DRAM. + * + * If dcache_disable() would be omitted, the following scenario may occur: + * + * The SPL enables dcache and cachelines get populated with data. Then dcache gets disabled + * in U-Boot proper, but still contains dirty data, i.e. the corresponding DRAM locations + * have not yet been updated. When U-Boot reads these locations, it sees an (incorrect) old + * state of the content. + * + * Furthermore, the DRAM contents have likely been modified by U-Boot while dcache was + * disabled. Thus, U-Boot flushing dcache would corrupt DRAM with stale data. + */ + dcache_disable(); /* implies flush_dcache_all() */ +} |