arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot

Sync all J7200 related v5.11-rc6 Linux kernel dts into U-Boot.
MCU R5F nodes are not yet added in Linux kernel yet but were added
in U-Boot. In order to avoid regressions, r5f nodes are kept intact.
These will be added in kernel in future.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

6 files changed, 583 insertions, 215 deletions

diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
index 0a5faa2..e52f7e1 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
@@ -11,13 +11,13 @@
 
 	aliases {
 		ethernet0 = &cpsw_port1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &mcu_i2c1;
+		i2c3 = &main_i2c0;
 	};
 };
 
-&chipid {
-	u-boot,dm-spl;
-};
-
 &cbass_main {
 	u-boot,dm-spl;
 };
@@ -36,6 +36,10 @@
 		clock-frequency = <25000000>;
 		u-boot,dm-spl;
 	};
+
+	chipid@43000014 {
+		u-boot,dm-spl;
+	};
 };
 
 &secure_proxy_main {
@@ -136,10 +140,6 @@
 	u-boot,dm-spl;
 };
 
-&wkup_gpio0 {
-	u-boot,dm-spl;
-};
-
 &mcu_fss0_hpb0_pins_default {
 	u-boot,dm-spl;
 };
diff --git a/arch/arm/dts/k3-j7200-common-proc-board.dts b/arch/arm/dts/k3-j7200-common-proc-board.dts
index 85cb159..5120711 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board.dts
+++ b/arch/arm/dts/k3-j7200-common-proc-board.dts
@@ -5,9 +5,10 @@
 
 /dts-v1/;
 
-#include <dt-bindings/net/ti-dp83867.h>
 #include "k3-j7200-som-p0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/mux/ti-serdes.h>
 
 / {
 	chosen {
@@ -60,7 +61,7 @@
 		>;
 	};
 
-	mcu_cpsw_pins_default: mcu_cpsw_pins_default {
+	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
 			J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
@@ -77,7 +78,7 @@
 		>;
 	};
 
-	mcu_mdio_pins_default: mcu_mdio1_pins_default {
+	mcu_mdio_pins_default: mcu-mdio1-pins-default {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
 			J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
@@ -93,7 +94,14 @@
 		>;
 	};
 
-	main_mmc1_pins_default: main_mmc1_pins_default {
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */
+			J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */
 			J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */
@@ -112,7 +120,7 @@
 		>;
 	};
 
-	main_usbss0_pins_default: main_usbss0_pins_default {
+	main_usbss0_pins_default: main-usbss0-pins-default {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
 		>;
@@ -121,16 +129,17 @@
 
 &wkup_uart0 {
 	/* Wakeup UART is used by System firmware */
-	status = "disabled";
+	status = "reserved";
 };
 
 &main_uart0 {
+	/* Shared with ATF on this platform */
 	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
 &main_uart2 {
 	/* MAIN UART 2 is used by R5F firmware */
-	status = "disabled";
+	status = "reserved";
 };
 
 &main_uart3 {
@@ -168,27 +177,22 @@
 	status = "disabled";
 };
 
-&wkup_i2c0 {
+&mcu_cpsw {
 	pinctrl-names = "default";
-	pinctrl-0 = <&wkup_i2c0_pins_default>;
-	clock-frequency = <400000>;
+	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
 };
 
-&main_sdhci0 {
-	/* eMMC */
-	non-removable;
-	ti,driver-strength-ohm = <50>;
-	disable-wp;
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
 };
 
-&main_sdhci1 {
-	/* SD card */
-	pinctrl-0 = <&main_mmc1_pins_default>;
-	pinctrl-names = "default";
-	vmmc-supply = <&vdd_mmc1>;
-	vqmmc-supply = <&vdd_sd_dv>;
-	ti,driver-strength-ohm = <50>;
-	disable-wp;
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
 };
 
 &main_i2c0 {
@@ -211,37 +215,69 @@
 	};
 };
 
-&usbss0 {
+/*
+ * The j7200 CPB board is identical to the CPB used for J721E, the SOMs can be
+ * swapped on the CPB.
+ *
+ * main_i2c1 of J7200 is connected to the CPB i2c bus labeled as i2c3.
+ * The i2c1 of the CPB (as it is labeled) is not connected to j7200.
+ */
+&main_i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&main_usbss0_pins_default>;
-	ti,vbus-divider;
-	ti,usb2-only;
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CODEC_RSTz", "CODEC_SPARE1", "UB926_RESETn",
+				  "UB926_LOCK", "UB926_PWR_SW_CNTRL",
+				  "UB926_TUNER_RESET", "UB926_GPIO_SPARE", "";
+	};
 };
 
-&usb0 {
-	dr_mode = "otg";
-	maximum-speed = "high-speed";
+&main_sdhci0 {
+	/* eMMC */
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
 };
 
-&wkup_gpio0 {
+&main_sdhci1 {
+	/* SD card */
+	pinctrl-0 = <&main_mmc1_pins_default>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&wkup_gpio_pins_default>;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
 };
 
-&mcu_cpsw {
+&serdes_ln_ctrl {
+	idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>,
+		      <J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>;
+};
+
+&usb_serdes_mux {
+	idle-states = <1>; /* USB0 to SERDES lane 3 */
+};
+
+&usbss0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+	ti,usb2-only;
 };
 
-&davinci_mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-	};
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
 };
 
-&cpsw_port1 {
-	phy-mode = "rgmii-rxid";
-	phy-handle = <&phy0>;
+&tscadc0 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
 };
diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi
index 9e6f738..1131464 100644
--- a/arch/arm/dts/k3-j7200-main.dtsi
+++ b/arch/arm/dts/k3-j7200-main.dtsi
@@ -8,13 +8,34 @@
 &cbass_main {
 	msmc_ram: sram@70000000 {
 		compatible = "mmio-sram";
-		reg = <0x0 0x70000000 0x0 0x100000>;
+		reg = <0x00 0x70000000 0x00 0x100000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0x70000000 0x100000>;
+		ranges = <0x00 0x00 0x70000000 0x100000>;
 
 		atf-sram@0 {
-			reg = <0x0 0x20000>;
+			reg = <0x00 0x20000>;
+		};
+	};
+
+	scm_conf: scm-conf@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x00100000 0x00 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
+		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
 		};
 	};
 
@@ -40,11 +61,48 @@
 		};
 	};
 
-	main_navss: navss@30000000 {
+	main_gpio_intr: interrupt-controller0 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <131>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_navss: bus@30000000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <199>;
+
+		main_navss_intr: interrupt-controller1 {
+			compatible = "ti,sci-intr";
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <213>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: msi-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x33d00000 0x00 0x100000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <209>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
 
 		secure_proxy_main: mailbox@32c00000 {
 			compatible = "ti,am654-secure-proxy";
@@ -56,12 +114,174 @@
 			interrupt-names = "rx_011";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x00 0x3c000000 0x00 0x400000>,
+				<0x00 0x38000000 0x00 0x400000>,
+				<0x00 0x31120000 0x00 0x100>,
+				<0x00 0x33000000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <211>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg =	<0x00 0x31150000 0x00 0x100>,
+				<0x00 0x34000000 0x00 0x100000>,
+				<0x00 0x35000000 0x00 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <212>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x310d0000 0x00 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 201 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
 	};
 
-	main_pmx0: pinmux@11c000 {
+	main_pmx0: pinctrl@11c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
-		reg = <0x0 0x11c000 0x0 0x2b4>;
+		reg = <0x00 0x11c000 0x00 0x2b4>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
@@ -197,28 +417,6 @@
 		clock-names = "fclk";
 	};
 
-	main_gpio0: gpio@600000 {
-		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
-		reg = <0x0 0x00600000 0x0 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts = <105 0 IRQ_TYPE_EDGE_RISING>,
-			     <105 1 IRQ_TYPE_EDGE_RISING>,
-			     <105 2 IRQ_TYPE_EDGE_RISING>,
-			     <105 3 IRQ_TYPE_EDGE_RISING>,
-			     <105 4 IRQ_TYPE_EDGE_RISING>,
-			     <105 5 IRQ_TYPE_EDGE_RISING>,
-			     <105 6 IRQ_TYPE_EDGE_RISING>,
-			     <105 7 IRQ_TYPE_EDGE_RISING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,ngpio = <69>;
-		ti,davinci-gpio-unbanked = <0>;
-		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 105 0>;
-		clock-names = "gpio";
-	};
-
 	main_sdhci0: sdhci@4f80000 {
 		compatible = "ti,j721e-sdhci-8bit";
 		reg = <0x0 0x04f80000 0x0 0x260>, <0x0 0x4f88000 0x0 0x134>;
@@ -259,18 +457,18 @@
 
 	main_i2c0: i2c@2000000 {
 		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x0 0x2000000 0x0 0x100>;
+		reg = <0x00 0x2000000 0x00 0x100>;
 		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-names = "fck";
 		clocks = <&k3_clks 187 1>;
-		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
 	};
 
 	main_i2c1: i2c@2010000 {
 		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x0 0x2010000 0x0 0x100>;
+		reg = <0x00 0x2010000 0x00 0x100>;
 		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -281,7 +479,7 @@
 
 	main_i2c2: i2c@2020000 {
 		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x0 0x2020000 0x0 0x100>;
+		reg = <0x00 0x2020000 0x00 0x100>;
 		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -292,7 +490,7 @@
 
 	main_i2c3: i2c@2030000 {
 		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x0 0x2030000 0x0 0x100>;
+		reg = <0x00 0x2030000 0x00 0x100>;
 		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -303,7 +501,7 @@
 
 	main_i2c4: i2c@2040000 {
 		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x0 0x2040000 0x0 0x100>;
+		reg = <0x00 0x2040000 0x00 0x100>;
 		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -314,7 +512,7 @@
 
 	main_i2c5: i2c@2050000 {
 		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x0 0x2050000 0x0 0x100>;
+		reg = <0x00 0x2050000 0x00 0x100>;
 		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -325,7 +523,7 @@
 
 	main_i2c6: i2c@2060000 {
 		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x0 0x2060000 0x0 0x100>;
+		reg = <0x00 0x2060000 0x00 0x100>;
 		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -334,13 +532,35 @@
 		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
 	};
 
-	usbss0: cdns_usb@4104000 {
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts = <105 0 IRQ_TYPE_EDGE_RISING>,
+			     <105 1 IRQ_TYPE_EDGE_RISING>,
+			     <105 2 IRQ_TYPE_EDGE_RISING>,
+			     <105 3 IRQ_TYPE_EDGE_RISING>,
+			     <105 4 IRQ_TYPE_EDGE_RISING>,
+			     <105 5 IRQ_TYPE_EDGE_RISING>,
+			     <105 6 IRQ_TYPE_EDGE_RISING>,
+			     <105 7 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 0>;
+		clock-names = "gpio";
+	};
+
+	usbss0: cdns-usb@4104000 {
 		compatible = "ti,j721e-usb";
 		reg = <0x00 0x4104000 0x00 0x100>;
 		dma-coherent;
 		power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 288 12>, <&k3_clks 288 3>;
-		clock-names = "usb2_refclk", "lpm_clk";
+		clock-names = "ref", "lpm";
 		assigned-clocks = <&k3_clks 288 12>;	/* USB2_REFCLK */
 		assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */
 		#address-cells = <2>;
diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
index 1faffe6..ac78d4c 100644
--- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
@@ -16,7 +16,7 @@
 			<&secure_proxy_main 13>;
 
 		reg-names = "debug_messages";
-		reg = <0x00 0x44083000 0x0 0x1000>;
+		reg = <0x00 0x44083000 0x00 0x1000>;
 
 		k3_pds: power-controller {
 			compatible = "ti,sci-pm-domain";
@@ -34,12 +34,26 @@
 		};
 	};
 
-	chipid: chipid@43000014 {
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x40f00000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	chipid@43000014 {
 		compatible = "ti,am654-chipid";
-		reg = <0x0 0x43000014 0x0 0x4>;
+		reg = <0x00 0x43000014 0x00 0x4>;
 	};
 
-	wkup_pmx0: pinmux@4301c000 {
+	wkup_pmx0: pinctrl@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c000 0x00 0x178>;
@@ -51,7 +65,7 @@
 	mcu_ram: sram@41c00000 {
 		compatible = "mmio-sram";
 		reg = <0x00 0x41c00000 0x00 0x100000>;
-		ranges = <0x0 0x00 0x41c00000 0x100000>;
+		ranges = <0x00 0x00 0x41c00000 0x100000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
@@ -69,17 +83,6 @@
 		clock-names = "fclk";
 	};
 
-	wkup_i2c0: i2c@42120000 {
-		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x0 0x42120000 0x0 0x100>;
-		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "fck";
-		clocks = <&k3_clks 197 1>;
-		power-domains = <&k3_pds 197 TI_SCI_PD_EXCLUSIVE>;
-	};
-
 	mcu_uart0: serial@40a00000 {
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x40a00000 0x00 0x100>;
@@ -93,84 +96,47 @@
 		clock-names = "fclk";
 	};
 
-	fss: system-controller@47000000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x0 0x47000000 0x0 0x100>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		hbmc_mux: hbmc-mux {
-			compatible = "mmio-mux";
-			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4 0x2>; /* HBMC select */
-		};
-
-		hbmc: hyperbus@47034000 {
-			compatible = "ti,am654-hbmc";
-			reg = <0x0 0x47034000 0x0 0x100>,
-				<0x5 0x00000000 0x1 0x0000000>;
-			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			mux-controls = <&hbmc_mux 0>;
-			clocks = <&k3_clks 102 5>;
-			assigned-clocks = <&k3_clks 102 5>;
-			assigned-clock-rates = <333333333>;
-		};
-	};
-
-	mcu_i2c0: i2c@40b00000 {
-		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x0 0x40b00000 0x0 0x100>;
-		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "fck";
-		clocks = <&k3_clks 194 1>;
-		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
-	};
-
-	mcu_i2c1: i2c@40b10000 {
-		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x0 0x40b10000 0x0 0x100>;
-		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "fck";
-		clocks = <&k3_clks 195 1>;
-		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+	wkup_gpio_intr: interrupt-controller2 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <137>;
+		ti,interrupt-ranges = <16 960 16>;
 	};
 
-	cbass_mcu_navss: mcu-navss {
+	mcu_navss: bus@28380000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
 		dma-coherent;
 		dma-ranges;
-
 		ti,sci-dev-id = <232>;
 
 		mcu_ringacc: ringacc@2b800000 {
 			compatible = "ti,am654-navss-ringacc";
-			reg =	<0x0 0x2b800000 0x0 0x400000>,
-				<0x0 0x2b000000 0x0 0x400000>,
-				<0x0 0x28590000 0x0 0x100>,
-				<0x0 0x2a500000 0x0 0x40000>;
+			reg =	<0x00 0x2b800000 0x00 0x400000>,
+				<0x00 0x2b000000 0x00 0x400000>,
+				<0x00 0x28590000 0x00 0x100>,
+				<0x00 0x2a500000 0x00 0x40000>;
 			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
 			ti,num-rings = <286>;
 			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
 			ti,sci = <&dmsc>;
 			ti,sci-dev-id = <235>;
+			msi-parent = <&main_udmass_inta>;
 		};
 
 		mcu_udmap: dma-controller@285c0000 {
 			compatible = "ti,j721e-navss-mcu-udmap";
-			reg =	<0x0 0x285c0000 0x0 0x100>,
-				<0x0 0x2a800000 0x0 0x40000>,
-				<0x0 0x2aa00000 0x0 0x40000>;
+			reg =	<0x00 0x285c0000 0x00 0x100>,
+				<0x00 0x2a800000 0x00 0x40000>,
+				<0x00 0x2aa00000 0x00 0x40000>;
 			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
 			ti,sci = <&dmsc>;
@@ -185,40 +151,13 @@
 		};
 	};
 
-	wkup_gpio0: gpio@42110000 {
-		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
-		reg = <0x0 0x42110000 0x0 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ti,ngpio = <84>;
-		ti,davinci-gpio-unbanked = <0>;
-		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 113 0>;
-		clock-names = "gpio";
-	};
-
-	mcu_conf: scm_conf@40f00000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x0 0x40f00000 0x0 0x20000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x40f00000 0x20000>;
-
-		phy_gmii_sel: phy@4040 {
-			compatible = "ti,am654-cpsw-phy-sel";
-			reg = <0x4040 0x4>;
-			reg-names = "gmii-sel";
-			#phy-cells = <1>;
-		};
-	};
-
 	mcu_cpsw: ethernet@46000000 {
 		compatible = "ti,j721e-cpsw-nuss";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg = <0x00 0x46000000 0x00 0x200000>;
 		reg-names = "cpsw_nuss";
-		ranges;
+		ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
 		dma-coherent;
 		clocks = <&k3_clks 18 21>;
 		clock-names = "fck";
@@ -244,7 +183,7 @@
 			cpsw_port1: port@1 {
 				reg = <1>;
 				ti,mac-only;
-				ti,label = "port1";
+				label = "port1";
 				ti,syscon-efuse = <&mcu_conf 0x200>;
 				phys = <&phy_gmii_sel 1>;
 			};
@@ -252,7 +191,7 @@
 
 		davinci_mdio: mdio@f00 {
 			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-			reg = <0x0 0xf00 0x0 0x100>;
+			reg = <0x00 0xf00 0x00 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&k3_clks 18 21>;
@@ -260,7 +199,9 @@
 			bus_freq = <1000000>;
 		};
 
-		cpts {
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
 			clocks = <&k3_clks 18 2>;
 			clock-names = "cpts";
 			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
@@ -270,6 +211,85 @@
 		};
 	};
 
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b00000 0x00 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 1>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b10000 0x00 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 1>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x42120000 0x00 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 1>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+	};
+
+	fss: syscon@47000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x47000000 0x00 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hbmc_mux: hbmc-mux {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+		};
+
+		hbmc: hyperbus@47034000 {
+			compatible = "ti,am654-hbmc";
+			reg = <0x00 0x47034000 0x00 0x100>,
+				<0x05 0x00000000 0x01 0x0000000>;
+			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+			clocks = <&k3_clks 102 0>;
+			assigned-clocks = <&k3_clks 102 5>;
+			assigned-clock-rates = <333333333>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			mux-controls = <&hbmc_mux 0>;
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40200000 0x00 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 1>;
+		assigned-clocks = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
 	mcu_r5fss0: r5fss@41000000 {
 		compatible = "ti,j7200-r5fss";
 		ti,cluster-mode = <1>;
diff --git a/arch/arm/dts/k3-j7200-som-p0.dtsi b/arch/arm/dts/k3-j7200-som-p0.dtsi
index ea5280d..7b5e9aa 100644
--- a/arch/arm/dts/k3-j7200-som-p0.dtsi
+++ b/arch/arm/dts/k3-j7200-som-p0.dtsi
@@ -11,8 +11,8 @@
 	memory@80000000 {
 		device_type = "memory";
 		/* 4G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
-		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x00 0x80000000>;
 	};
 
 	reserved_memory: reserved-memory {
@@ -48,15 +48,112 @@
 	};
 };
 
+&main_pmx0 {
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
+			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+		>;
+	};
+};
+
 &hbmc {
+	/* OSPI and HBMC are muxed inside FSS, Bootloader will enable
+	 * appropriate node based on board detection
+	 */
 	status = "disabled";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
-	ranges = <0x0 0x0 0x5 0x0 0x4000000>, /* 64MB Flash on CS0 */
-		 <0x1 0x0 0x5 0x4000000 0x800000>; /* 8MB RAM on CS1 */
+	ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
+		 <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
 
 	flash@0,0 {
 		compatible = "cypress,hyperflash", "cfi-flash";
-		reg = <0x0 0x0 0x4000000>;
+		reg = <0x00 0x00 0x4000000>;
+	};
+};
+
+&mailbox0_cluster0 {
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "disabled";
+};
+
+&mailbox0_cluster3 {
+	status = "disabled";
+};
+
+&mailbox0_cluster4 {
+	status = "disabled";
+};
+
+&mailbox0_cluster5 {
+	status = "disabled";
+};
+
+&mailbox0_cluster6 {
+	status = "disabled";
+};
+
+&mailbox0_cluster7 {
+	status = "disabled";
+};
+
+&mailbox0_cluster8 {
+	status = "disabled";
+};
+
+&mailbox0_cluster9 {
+	status = "disabled";
+};
+
+&mailbox0_cluster10 {
+	status = "disabled";
+};
+
+&mailbox0_cluster11 {
+	status = "disabled";
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp_som: gpio@21 {
+		compatible = "ti,tca6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
+				  "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1",
+				  "UART/LIN_MUX_SEL", "TRC_D17/AUDIO_REFCLK_SEL",
+				  "GPIO_LIN_EN", "CAN_STB";
 	};
 };
diff --git a/arch/arm/dts/k3-j7200.dtsi b/arch/arm/dts/k3-j7200.dtsi
index 126c31b..66169bc 100644
--- a/arch/arm/dts/k3-j7200.dtsi
+++ b/arch/arm/dts/k3-j7200.dtsi
@@ -30,18 +30,10 @@
 		serial9 = &main_uart7;
 		serial10 = &main_uart8;
 		serial11 = &main_uart9;
-		i2c0 = &wkup_i2c0;
-		i2c1 = &mcu_i2c0;
-		i2c2 = &mcu_i2c1;
-		i2c3 = &main_i2c0;
-		i2c4 = &main_i2c1;
-		i2c5 = &main_i2c2;
-		i2c6 = &main_i2c3;
-		i2c7 = &main_i2c4;
-		i2c8 = &main_i2c5;
-		i2c9 = &main_i2c6;
 	};
 
+	chosen { };
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -63,7 +55,7 @@
 			reg = <0x000>;
 			device_type = "cpu";
 			enable-method = "psci";
-			i-cache-size = <0xC000>;
+			i-cache-size = <0xc000>;
 			i-cache-line-size = <64>;
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
@@ -77,7 +69,7 @@
 			reg = <0x001>;
 			device_type = "cpu";
 			enable-method = "psci";
-			i-cache-size = <0xC000>;
+			i-cache-size = <0xc000>;
 			i-cache-line-size = <64>;
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
@@ -132,11 +124,12 @@
 		#size-cells = <2>;
 		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
 			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
-			 <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
 			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
-			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT */
+			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
 
 			 /* MCUSS_WKUP Range */
 			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
@@ -150,7 +143,8 @@
 			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
 			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
 			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
-			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>;
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
 
 		cbass_mcu_wakeup: bus@28380000 {
 			compatible = "simple-bus";
@@ -167,7 +161,8 @@
 				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
 				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
 				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
-				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>; /* FSS OSPI0 data region 3 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */
 		};
 	};
 };