arm: Remove db-88f6281-bp board

This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago.  In addition there are other DM
migrations it is also missing.  Remove it.

Cc: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Chris Packham <judge.packham@gmail.com>

5 files changed, 0 insertions, 174 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index af2842a..33e483f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -39,8 +39,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
 	kirkwood-atl-sbx81lifxcat.dtb \
 	kirkwood-blackarmor-nas220.dtb \
 	kirkwood-d2net.dtb \
-	kirkwood-db-88f6281.dtb \
-	kirkwood-db-88f6281-spi.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
diff --git a/arch/arm/dts/kirkwood-db-88f6281-spi.dts b/arch/arm/dts/kirkwood-db-88f6281-spi.dts
deleted file mode 100644
index 50b1b0d..0000000
--- a/arch/arm/dts/kirkwood-db-88f6281-spi.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood-db-88f6281.dts"
-
-/ {
-	aliases {
-		spi0 = &spi0;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p128", "jedec,spi-nor", "spi-flash";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		mode = <0>;
-
-		partition@u-boot {
-			reg = <0x00000000 0x00c00000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x00c00000 0x00040000>;
-			label = "u-boot-env";
-		};
-		partition@unused {
-			reg = <0x00100000 0x00f00000>;
-			label = "unused";
-		};
-	};
-};
-
-&nand {
-	status = "disabled";
-};
diff --git a/arch/arm/dts/kirkwood-db-88f6281.dts b/arch/arm/dts/kirkwood-db-88f6281.dts
deleted file mode 100644
index 2adb17c..0000000
--- a/arch/arm/dts/kirkwood-db-88f6281.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Marvell DB-88F6281-BP Development Board";
-	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/dts/kirkwood-db.dtsi b/arch/arm/dts/kirkwood-db.dtsi
deleted file mode 100644
index b81d8e8..0000000
--- a/arch/arm/dts/kirkwood-db.dtsi
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file contains the definitions that are common between the 6281
- * and 6282 variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	aliases {
-		ethernet0 = &eth0;
-		spi0 = &spi0;
-	};
-
-	ocp@f1000000 {
-		pin-controller@10000 {
-			pmx_sdio_gpios: pmx-sdio-gpios {
-				marvell,pins = "mpp37", "mpp38";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio_gpios>;
-			pinctrl-names = "default";
-			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			status = "okay";
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "root";
-		reg = <0x500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index ae44cb6..cb4e9f2 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -62,9 +62,6 @@ config TARGET_SBx81LIFKW
 config TARGET_SBx81LIFXCAT
 	bool "Allied Telesis SBx81GP24/SBx81GT24"
 
-config TARGET_DB_88F6281_BP
-	bool "Marvell DB-88F6281-BP"
-
 endchoice
 
 config SYS_SOC
@@ -89,6 +86,5 @@ source "board/Seagate/nas220/Kconfig"
 source "board/zyxel/nsa310s/Kconfig"
 source "board/alliedtelesis/SBx81LIFKW/Kconfig"
 source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
-source "board/Marvell/db-88f6281-bp/Kconfig"
 
 endif