Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next

- Various x86 common codes updated for TPL/SPL
- I2C designware driver updated for PCI
- ICH SPI driver updated to support Apollo Lake
- Add Intel FSP2 base support
- Intel Apollo Lake platform specific drivers support
- Add a new board Google Chromebook Coral

97 files changed, 7529 insertions, 286 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 141e48b..ae9c93e 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -133,6 +133,9 @@ config SANDBOX
 	imply PHYLIB
 	imply DM_MDIO
 	imply DM_MDIO_MUX
+	imply ACPI_PMC
+	imply ACPI_PMC_SANDBOX
+	imply CMD_PMC
 
 config SH
 	bool "SuperH architecture"
@@ -183,12 +186,14 @@ config X86
 	imply USB_HOST_ETHER
 	imply PCH
 	imply RTC_MC146818
+	imply IRQ
 
 	# Thing to enable for when SPL/TPL are enabled: SPL
 	imply SPL_DM
 	imply SPL_OF_LIBFDT
 	imply SPL_DRIVERS_MISC_SUPPORT
 	imply SPL_GPIO_SUPPORT
+	imply SPL_PINCTRL
 	imply SPL_LIBCOMMON_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_SERIAL_SUPPORT
@@ -200,14 +205,12 @@ config X86
 	imply SPL_SYSCON
 	# TPL
 	imply TPL_DM
-	imply TPL_OF_LIBFDT
 	imply TPL_DRIVERS_MISC_SUPPORT
 	imply TPL_GPIO_SUPPORT
+	imply TPL_PINCTRL
 	imply TPL_LIBCOMMON_SUPPORT
 	imply TPL_LIBGENERIC_SUPPORT
 	imply TPL_SERIAL_SUPPORT
-	imply TPL_SPI_FLASH_SUPPORT
-	imply TPL_SPI_SUPPORT
 	imply TPL_OF_CONTROL
 	imply TPL_TIMER
 	imply TPL_REGMAP
diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h
index 20268fa..151afa8 100644
--- a/arch/arm/include/asm/omap_gpio.h
+++ b/arch/arm/include/asm/omap_gpio.h
@@ -22,7 +22,7 @@
 
 #include <asm/arch/cpu.h>
 
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
 
 /* Information about a GPIO bank */
 struct omap_gpio_platdata {
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 91faf72..2daeb4f 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -133,7 +133,7 @@
 /*
  * Other misc defines
  */
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
 #define ATMEL_PIO_PORTS		3		/* these SoCs have 3 PIO */
 #define ATMEL_BASE_PIO		ATMEL_BASE_PIOA
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index c150240..e5a4053 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -18,7 +18,7 @@
 #define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67)
 #define davinci_gpio_bank8 ((struct davinci_gpio *)DAVINCI_GPIO_BANK8)
 
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
 #define gpio_status()		gpio_info()
 #endif
 #define GPIO_NAME_SIZE		20
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index 03460c3..e64942b 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -116,7 +116,7 @@ U_BOOT_DEVICES(am33xx_i2c) = {
 };
 #endif
 
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
 static const struct omap_gpio_platdata am33xx_gpio[] = {
 	{ 0, AM33XX_GPIO0_BASE },
 	{ 1, AM33XX_GPIO1_BASE },
@@ -141,7 +141,7 @@ U_BOOT_DEVICES(am33xx_gpios) = {
 #endif
 #endif
 
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
 static const struct gpio_bank gpio_bank_am33xx[] = {
 	{ (void *)AM33XX_GPIO0_BASE },
 	{ (void *)AM33XX_GPIO1_BASE },
diff --git a/arch/arm/mach-omap2/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c
index 658ef8c..60de0d6 100644
--- a/arch/arm/mach-omap2/omap3/board.c
+++ b/arch/arm/mach-omap2/omap3/board.c
@@ -33,7 +33,7 @@ extern omap3_sysinfo sysinfo;
 static void omap3_invalidate_l2_cache_secure(void);
 #endif
 
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
 #if !CONFIG_IS_ENABLED(OF_CONTROL)
 /* Manually initialize GPIO banks when OF_CONTROL doesn't */
 static const struct omap_gpio_platdata omap34xx_gpio[] = {
diff --git a/arch/arm/mach-omap2/omap5/hwinit.c b/arch/arm/mach-omap2/omap5/hwinit.c
index eba2164..56458ce 100644
--- a/arch/arm/mach-omap2/omap5/hwinit.c
+++ b/arch/arm/mach-omap2/omap5/hwinit.c
@@ -25,7 +25,7 @@
 
 u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
 
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
 static struct gpio_bank gpio_bank_54xx[8] = {
 	{ (void *)OMAP54XX_GPIO1_BASE },
 	{ (void *)OMAP54XX_GPIO2_BASE },
diff --git a/arch/sandbox/cpu/state.c b/arch/sandbox/cpu/state.c
index dee5fde..cd46e00 100644
--- a/arch/sandbox/cpu/state.c
+++ b/arch/sandbox/cpu/state.c
@@ -356,6 +356,7 @@ void state_reset_for_test(struct sandbox_state *state)
 	/* No reset yet, so mark it as such. Always allow power reset */
 	state->last_sysreset = SYSRESET_COUNT;
 	state->sysreset_allowed[SYSRESET_POWER_OFF] = true;
+	state->allow_memio = false;
 
 	memset(&state->wdt, '\0', sizeof(state->wdt));
 	memset(state->spi, '\0', sizeof(state->spi));
diff --git a/arch/sandbox/dts/sandbox.dtsi b/arch/sandbox/dts/sandbox.dtsi
index f09bc70..7bf144f 100644
--- a/arch/sandbox/dts/sandbox.dtsi
+++ b/arch/sandbox/dts/sandbox.dtsi
@@ -100,6 +100,17 @@
 	};
 
 	pci-controller {
+		pci@1e,0 {
+			compatible = "sandbox,pmc";
+			reg = <0xf000 0 0 0 0>;
+			sandbox,emul = <&pmc_emul>;
+			gpe0-dwx-mask = <0xf>;
+			gpe0-dwx-shift-base = <4>;
+			gpe0-dw = <6 7 9>;
+			gpe0-sts = <0x20>;
+			gpe0-en = <0x30>;
+		};
+
 		pci@1f,0 {
 			compatible = "pci-generic";
 			reg = <0xf800 0 0 0 0>;
@@ -109,6 +120,9 @@
 
 	emul {
 		compatible = "sandbox,pci-emul-parent";
+		pmc_emul: emul@1e,0 {
+			compatible = "sandbox,pmc-emul";
+		};
 		swap_case_emul: emul@1f,0 {
 			compatible = "sandbox,swap-case";
 		};
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index fdb08f2..57513a4 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -353,6 +353,10 @@
 		vss-microvolts = <0>;
 	};
 
+	irq {
+		compatible = "sandbox,irq";
+	};
+
 	lcd {
 		u-boot,dm-pre-reloc;
 		compatible = "sandbox,lcd-sdl";
@@ -471,6 +475,27 @@
 			       0x01000810 0 0 0 0>;
 			sandbox,emul = <&swap_case_emul0_1>;
 		};
+		p2sb-pci@2,0 {
+			compatible = "sandbox,p2sb";
+			reg = <0x02001010 0 0 0 0>;
+			sandbox,emul = <&p2sb_emul>;
+
+			adder {
+				intel,p2sb-port-id = <3>;
+				compatible = "sandbox,adder";
+			};
+		};
+		pci@1e,0 {
+			compatible = "sandbox,pmc";
+			reg = <0xf000 0 0 0 0>;
+			sandbox,emul = <&pmc_emul1e>;
+			acpi-base = <0x400>;
+			gpe0-dwx-mask = <0xf>;
+			gpe0-dwx-shift-base = <4>;
+			gpe0-dw = <6 7 9>;
+			gpe0-sts = <0x20>;
+			gpe0-en = <0x30>;
+		};
 		pci@1f,0 {
 			compatible = "pci-generic";
 			/* reg 0 is at 0x10, using FDT_PCI_SPACE_IO */
@@ -491,6 +516,12 @@
 		swap_case_emul0_1f: emul0@1f,0 {
 			compatible = "sandbox,swap-case";
 		};
+		p2sb_emul: emul@2,0 {
+			compatible = "sandbox,p2sb-emul";
+		};
+		pmc_emul1e: emul@1e,0 {
+			compatible = "sandbox,pmc-emul";
+		};
 	};
 
 	pci1: pci-controller1 {
diff --git a/arch/sandbox/include/asm/test.h b/arch/sandbox/include/asm/test.h
index 7dd9aa5..2421922 100644
--- a/arch/sandbox/include/asm/test.h
+++ b/arch/sandbox/include/asm/test.h
@@ -13,6 +13,8 @@
 
 #define SANDBOX_PCI_VENDOR_ID		0x1234
 #define SANDBOX_PCI_SWAP_CASE_EMUL_ID	0x5678
+#define SANDBOX_PCI_PMC_EMUL_ID		0x5677
+#define SANDBOX_PCI_P2SB_EMUL_ID	0x5676
 #define SANDBOX_PCI_CLASS_CODE		PCI_CLASS_CODE_COMM
 #define SANDBOX_PCI_CLASS_SUB_CODE	PCI_CLASS_SUB_CODE_COMM_SERIAL
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 17a6fe6..89b93e5 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -106,6 +106,7 @@ source "board/google/Kconfig"
 source "board/intel/Kconfig"
 
 # platform-specific options below
+source "arch/x86/cpu/apollolake/Kconfig"
 source "arch/x86/cpu/baytrail/Kconfig"
 source "arch/x86/cpu/braswell/Kconfig"
 source "arch/x86/cpu/broadwell/Kconfig"
@@ -217,6 +218,14 @@ config SYS_X86_START16
 	depends on X86_RESET_VECTOR
 	default 0xfffff800
 
+config HAVE_X86_FIT
+	bool
+	help
+	  Enable inclusion of an Intel Firmware Interface Table (FIT) into the
+	  image. This table is supposed to point to microcode and the like. So
+	  far it is just a fixed table with the minimum set of headers, so that
+	  it is actually present.
+
 config X86_LOAD_FROM_32_BIT
 	bool "Boot from a 32-bit program"
 	help
@@ -326,7 +335,7 @@ config X86_RAMTEST
 
 config FLASH_DESCRIPTOR_FILE
 	string "Flash descriptor binary filename"
-	depends on HAVE_INTEL_ME
+	depends on HAVE_INTEL_ME || FSP_VERSION2
 	default "descriptor.bin"
 	help
 	  The filename of the file to use as flash descriptor in the
@@ -411,6 +420,54 @@ config FSP_ADDR
 	  The default base address of 0xfffc0000 indicates that the binary must
 	  be located at offset 0xc0000 from the beginning of a 1MB flash device.
 
+if FSP_VERSION2
+
+config FSP_FILE_T
+	string "Firmware Support Package binary filename (Temp RAM)"
+	default "fsp_t.bin"
+	help
+	  The filename of the file to use for the temporary-RAM init phase from
+	  the Firmware Support Package binary. Put this in the board directory.
+	  It is used to set up an initial area of RAM which can be used for the
+	  stack and other purposes, while bringing up the main system DRAM.
+
+config FSP_ADDR_T
+	hex "Firmware Support Package binary location (Temp RAM)"
+	default 0xffff8000
+	help
+	  FSP is not Position-Independent Code (PIC) and FSP components have to
+	  be rebased if placed at a location which is different from the
+	  perferred base address specified during the FSP build. Use Intel's
+	  Binary Configuration Tool (BCT) to do the rebase.
+
+config FSP_FILE_M
+	string "Firmware Support Package binary filename (Memory Init)"
+	default "fsp_m.bin"
+	help
+	  The filename of the file to use for the RAM init phase from the
+	  Firmware Support Package binary. Put this in the board directory.
+	  It is used to set up the main system DRAM and runs in SPL, once
+	  temporary RAM (CAR) is working.
+
+config FSP_FILE_S
+	string "Firmware Support Package binary filename (Silicon Init)"
+	default "fsp_s.bin"
+	help
+	  The filename of the file to use for the Silicon init phase from the
+	  Firmware Support Package binary. Put this in the board directory.
+	  It is used to set up the silicon to work correctly and must be
+	  executed after DRAM is running.
+
+config IFWI_INPUT_FILE
+	string "Filename containing FIT (Firmware Interface Table) with IFWI"
+	default "fitimage.bin"
+	help
+	  The IFWI is obtained by running a tool on this file to extract the
+	  IFWI. Put this in the board directory. The IFWI contains U-Boot TPL,
+	  microcode and other internal items.
+
+endif
+
 config FSP_TEMP_RAM_ADDR
 	hex
 	depends on FSP_VERSION1
@@ -532,6 +589,10 @@ config HAVE_REFCODE
           broadwell) U-Boot will be missing some critical setup steps.
           Various peripherals may fail to work.
 
+config HAVE_MICROCODE
+	bool
+	default y if !FSP_VERSION2
+
 config SMP
 	bool "Enable Symmetric Multiprocessing"
 	default n
@@ -595,7 +656,7 @@ config VGA_BIOS_ADDR
 
 config HAVE_VBT
 	bool "Add a Video BIOS Table (VBT) image"
-	depends on FSP_VERSION1
+	depends on HAVE_FSP
 	help
 	  Select this option if you have a Video BIOS Table (VBT) image that
 	  you would like to add to your ROM. This is normally required if you
@@ -823,4 +884,30 @@ config HIGH_TABLE_SIZE
 	  Increse it if the default size does not fit the board's needs.
 	  This is most likely due to a large ACPI DSDT table is used.
 
+config INTEL_CAR_CQOS
+	bool "Support Intel Cache Quality of Service"
+	help
+	  Cache Quality of Service allows more fine-grained control of cache
+	  usage. As result, it is possible to set up a portion of L2 cache for
+	  CAR and use the remainder for actual caching.
+
+#
+# Each bit in QOS mask controls this many bytes. This is calculated as:
+# (CACHE_WAYS / CACHE_BITS_PER_MASK) * CACHE_LINE_SIZE * CACHE_SETS
+#
+config CACHE_QOS_SIZE_PER_BIT
+	hex
+	depends on INTEL_CAR_CQOS
+	default 0x20000 # 128 KB
+
+config X86_OFFSET_U_BOOT
+	hex "Offset of U-Boot in ROM image"
+	depends on HAVE_SYS_TEXT_BASE
+	default SYS_TEXT_BASE
+
+config X86_OFFSET_SPL
+	hex "Offset of SPL in ROM image"
+	depends on SPL && X86
+	default SPL_TEXT_BASE
+
 endmenu
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 6296b55..5b40838 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -41,6 +41,7 @@ extra-y += call32.o
 endif
 
 obj-y += intel_common/
+obj-$(CONFIG_INTEL_APOLLOLAKE) += apollolake/
 obj-$(CONFIG_INTEL_BAYTRAIL) += baytrail/
 obj-$(CONFIG_INTEL_BRASWELL) += braswell/
 obj-$(CONFIG_INTEL_BROADWELL) += broadwell/
@@ -53,7 +54,8 @@ obj-$(CONFIG_INTEL_QUARK) += quark/
 obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/
 obj-$(CONFIG_INTEL_TANGIER) += tangier/
 obj-$(CONFIG_APIC) += lapic.o ioapic.o
-obj-y += irq.o
+obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += irq.o
+obj-$(CONFIG_QFW) += qfw_cpu.o
 ifndef CONFIG_$(SPL_)X86_64
 obj-$(CONFIG_SMP) += mp_init.o
 endif
diff --git a/arch/x86/cpu/apollolake/Kconfig b/arch/x86/cpu/apollolake/Kconfig
new file mode 100644
index 0000000..fcff176
--- /dev/null
+++ b/arch/x86/cpu/apollolake/Kconfig
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2019 Google LLC
+#
+
+config INTEL_APOLLOLAKE
+	bool
+	select FSP_VERSION2
+	select HAVE_FSP
+	select ARCH_MISC_INIT
+	select USE_CAR
+	select INTEL_PMC
+	select TPL_X86_TSC_TIMER_NATIVE
+	select SPL_PCH_SUPPORT
+	select TPL_PCH_SUPPORT
+	select PCH_SUPPORT
+	select P2SB
+	imply ENABLE_MRC_CACHE
+	imply AHCI_PCI
+	imply SCSI
+	imply SCSI_AHCI
+	imply SPI_FLASH
+	imply USB
+	imply USB_EHCI_HCD
+	imply TPL
+	imply SPL
+	imply TPL_X86_16BIT_INIT
+	imply TPL_OF_PLATDATA
+	imply ACPI_PMC
+	imply MMC
+	imply DM_MMC
+	imply MMC_PCI
+	imply MMC_SDHCI
+	imply CMD_MMC
+	imply VIDEO_FSP
+	imply PINCTRL_INTEL
+	imply PINCTRL_INTEL_APL
+	imply HAVE_VBT
+	imply HAVE_X86_FIT
+	imply INTEL_GPIO
+	imply SMP
+
+if INTEL_APOLLOLAKE
+
+config DCACHE_RAM_BASE
+	default 0xfef00000
+
+config DCACHE_RAM_SIZE
+	default 0xc0000
+
+config DCACHE_RAM_MRC_VAR_SIZE
+	default 0xb0000
+
+config CPU_SPECIFIC_OPTIONS
+	def_bool y
+	select SMM_TSEG
+	select X86_RAMTEST
+
+config SMM_TSEG_SIZE
+	hex
+	default 0x800000
+
+config MMCONF_BASE_ADDRESS
+	hex
+	default 0xe0000000
+
+config TPL_SIZE_LIMIT
+	default 0x7800
+
+config CPU_ADDR_BITS
+	default 39
+
+config APL_SPI_FLASH_BOOT
+	bool "Support booting with SPI-flash driver instead memory-mapped SPI"
+	select TPL_SPI_FLASH_SUPPORT
+	select TPL_SPI_SUPPORT
+	help
+	  This enables SPI and SPI flash in TPL. Without the this only
+	  available boot method is to use memory-mapped SPI. Since this is
+	  actually fast and produces a TPL which is 7KB smaller, memory-mapped
+	  SPI is the default.
+
+config APL_BOOT_FROM_FAST_SPI_FLASH
+	bool "Boot using SPI flash driver"
+	select APL_SPI_FLASH_BOOT
+	help
+	  This option is separate from APL_SPI_FLASH_BOOT since it is useful to
+	  be able to compare booting speed with the same build. Enable this to
+	  use the SPI-flash driver to load SPL, U-Boot and FSP-M. For technical
+	  reasons FSP-S is currently always loaded from memory-mapped SPI. See
+	  Apollo Lake's arch_fsp_init_r() for details about that.
+
+config VBT_ADDR
+	default 0xff3f1000
+
+endif
diff --git a/arch/x86/cpu/apollolake/Makefile b/arch/x86/cpu/apollolake/Makefile
new file mode 100644
index 0000000..1760df5
--- /dev/null
+++ b/arch/x86/cpu/apollolake/Makefile
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2019 Google LLC
+
+obj-$(CONFIG_SPL_BUILD) += cpu_spl.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
+obj-$(CONFIG_SPL_BUILD) += systemagent.o
+obj-y += cpu_common.o
+
+ifndef CONFIG_TPL_BUILD
+obj-y += cpu.o
+obj-y += punit.o
+ifdef CONFIG_SPL_BUILD
+obj-y += fsp_m.o
+endif
+endif
+ifndef CONFIG_SPL_BUILD
+obj-y += fsp_s.o
+endif
+
+obj-y += hostbridge.o
+obj-y += itss.o
+obj-y += lpc.o
+obj-y += p2sb.o
+obj-y += pch.o
+obj-y += pmc.o
+obj-y += uart.o
diff --git a/arch/x86/cpu/apollolake/cpu.c b/arch/x86/cpu/apollolake/cpu.c
new file mode 100644
index 0000000..3d05c82
--- /dev/null
+++ b/arch/x86/cpu/apollolake/cpu.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <cpu.h>
+#include <dm.h>
+#include <asm/cpu_common.h>
+#include <asm/cpu_x86.h>
+
+static int apl_get_info(struct udevice *dev, struct cpu_info *info)
+{
+	return cpu_intel_get_info(info, INTEL_BCLK_MHZ);
+}
+
+static int apl_get_count(struct udevice *dev)
+{
+	return 4;
+}
+
+static const struct cpu_ops cpu_x86_apl_ops = {
+	.get_desc	= cpu_x86_get_desc,
+	.get_info	= apl_get_info,
+	.get_count	= apl_get_count,
+	.get_vendor	= cpu_x86_get_vendor,
+};
+
+static const struct udevice_id cpu_x86_apl_ids[] = {
+	{ .compatible = "intel,apl-cpu" },
+	{ }
+};
+
+U_BOOT_DRIVER(cpu_x86_apl_drv) = {
+	.name		= "cpu_x86_apl",
+	.id		= UCLASS_CPU,
+	.of_match	= cpu_x86_apl_ids,
+	.bind		= cpu_x86_bind,
+	.ops		= &cpu_x86_apl_ops,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/arch/x86/cpu/apollolake/cpu_common.c b/arch/x86/cpu/apollolake/cpu_common.c
new file mode 100644
index 0000000..ba6bda3
--- /dev/null
+++ b/arch/x86/cpu/apollolake/cpu_common.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <asm/cpu_common.h>
+#include <asm/msr.h>
+
+void cpu_flush_l1d_to_l2(void)
+{
+	struct msr_t msr;
+
+	msr = msr_read(MSR_POWER_MISC);
+	msr.lo |= FLUSH_DL1_L2;
+	msr_write(MSR_POWER_MISC, msr);
+}
diff --git a/arch/x86/cpu/apollolake/cpu_spl.c b/arch/x86/cpu/apollolake/cpu_spl.c
new file mode 100644
index 0000000..8a39c31
--- /dev/null
+++ b/arch/x86/cpu/apollolake/cpu_spl.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Portions taken from coreboot
+ */
+
+#include <common.h>
+#include <acpi_s3.h>
+#include <dm.h>
+#include <ec_commands.h>
+#include <log.h>
+#include <spi_flash.h>
+#include <spl.h>
+#include <syscon.h>
+#include <asm/cpu.h>
+#include <asm/cpu_common.h>
+#include <asm/cpu_x86.h>
+#include <asm/fast_spi.h>
+#include <asm/intel_pinctrl.h>
+#include <asm/intel_regs.h>
+#include <asm/io.h>
+#include <asm/msr.h>
+#include <asm/mtrr.h>
+#include <asm/pci.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/iomap.h>
+#include <asm/arch/lpc.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/systemagent.h>
+#include <asm/arch/uart.h>
+#include <asm/fsp2/fsp_api.h>
+#include <linux/sizes.h>
+#include <power/acpi_pmc.h>
+
+/* Define this here to avoid referencing any drivers for the debug UART 1 */
+#define PCH_DEV_P2SB	PCI_BDF(0, 0x0d, 0)
+
+static void pch_uart_init(void)
+{
+	/*
+	 * Set up the pinmux so that the UART rx/tx signals are connected
+	 * outside the SoC.
+	 *
+	 * There are about 500 lines of code required to program the GPIO
+	 * configuration for the UARTs. But it boils down to four writes, and
+	 * for the debug UART we want the minimum possible amount of code before
+	 * the UART is running. So just add the magic writes here. See
+	 * apl_hostbridge_early_init_pinctrl() for the full horror.
+	 */
+	if (PCI_FUNC(PCH_DEV_UART) == 1) {
+		writel(0x40000402, 0xd0c50650);
+		writel(0x3c47, 0xd0c50654);
+		writel(0x40000400, 0xd0c50658);
+		writel(0x3c48, 0xd0c5065c);
+	} else { /* UART2 */
+		writel(0x40000402, 0xd0c50670);
+		writel(0x3c4b, 0xd0c50674);
+		writel(0x40000400, 0xd0c50678);
+		writel(0x3c4c, 0xd0c5067c);
+	}
+
+#ifdef CONFIG_DEBUG_UART
+	apl_uart_init(PCH_DEV_UART, CONFIG_DEBUG_UART_BASE);
+#endif
+}
+
+static void p2sb_enable_bar(ulong bar)
+{
+	/* Enable PCR Base address in PCH */
+	pci_x86_write_config(PCH_DEV_P2SB, PCI_BASE_ADDRESS_0, bar,
+			     PCI_SIZE_32);
+	pci_x86_write_config(PCH_DEV_P2SB, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32);
+
+	/* Enable P2SB MSE */
+	pci_x86_write_config(PCH_DEV_P2SB, PCI_COMMAND,
+			     PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY,
+			     PCI_SIZE_8);
+}
+
+/*
+ * board_debug_uart_init() - Init the debug UART ready for use
+ *
+ * This is the minimum init needed to get the UART running. It avoids any
+ * drivers or complex code, so that the UART is running as soon as possible.
+ */
+void board_debug_uart_init(void)
+{
+	p2sb_enable_bar(IOMAP_P2SB_BAR);
+	pch_uart_init();
+}
+
+static int fast_spi_cache_bios_region(void)
+{
+	uint map_size, offset;
+	ulong map_base, base;
+	int ret;
+
+	ret = fast_spi_early_init(PCH_DEV_SPI, IOMAP_SPI_BASE);
+	if (ret)
+		return log_msg_ret("early_init", ret);
+
+	ret = fast_spi_get_bios_mmap(PCH_DEV_SPI, &map_base, &map_size,
+				     &offset);
+	if (ret)
+		return log_msg_ret("get_mmap", ret);
+
+	base = SZ_4G - map_size;
+	mtrr_set_next_var(MTRR_TYPE_WRPROT, base, map_size);
+	log_debug("BIOS cache base=%lx, size=%x\n", base, (uint)map_size);
+
+	return 0;
+}
+
+static void enable_pm_timer_emulation(struct udevice *pmc)
+{
+	struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(pmc);
+	msr_t msr;
+
+	/*
+	 * The derived frequency is calculated as follows:
+	 *    (CTC_FREQ * msr[63:32]) >> 32 = target frequency.
+	 *
+	 * Back-solve the multiplier so the 3.579545MHz ACPI timer frequency is
+	 * used.
+	 */
+	msr.hi = (3579545ULL << 32) / CTC_FREQ;
+
+	/* Set PM1 timer IO port and enable */
+	msr.lo = EMULATE_PM_TMR_EN | (upriv->acpi_base + R_ACPI_PM1_TMR);
+	debug("PM timer %x %x\n", msr.hi, msr.lo);
+	msr_write(MSR_EMULATE_PM_TIMER, msr);
+}
+
+static void google_chromeec_ioport_range(uint *out_basep, uint *out_sizep)
+{
+	uint base;
+	uint size;
+
+	if (IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC_MEC)) {
+		base = MEC_EMI_BASE;
+		size = MEC_EMI_SIZE;
+	} else {
+		base = EC_HOST_CMD_REGION0;
+		size = 2 * EC_HOST_CMD_REGION_SIZE;
+		/* Make sure MEMMAP region follows host cmd region */
+		assert(base + size == EC_LPC_ADDR_MEMMAP);
+		size += EC_MEMMAP_SIZE;
+	}
+
+	*out_basep = base;
+	*out_sizep = size;
+}
+
+static void early_ec_init(void)
+{
+	uint base, size;
+
+	/*
+	 * Set up LPC decoding for the Chrome OS EC I/O port ranges:
+	 * - Ports 62/66, 60/64, and 200->208
+	 * - Chrome OS EC communication I/O ports
+	 */
+	lpc_enable_fixed_io_ranges(LPC_IOE_EC_62_66 | LPC_IOE_KBC_60_64 |
+				   LPC_IOE_LGE_200);
+	google_chromeec_ioport_range(&base, &size);
+	lpc_open_pmio_window(base, size);
+}
+
+static int arch_cpu_init_tpl(void)
+{
+	struct udevice *pmc, *sa, *p2sb, *serial, *spi, *lpc;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_ACPI_PMC, &pmc);
+	if (ret)
+		return log_msg_ret("PMC", ret);
+
+	/* Clear global reset promotion bit */
+	ret = pmc_global_reset_set_enable(pmc, false);
+	if (ret)
+		return log_msg_ret("disable global reset", ret);
+
+	enable_pm_timer_emulation(pmc);
+
+	ret = uclass_first_device_err(UCLASS_P2SB, &p2sb);
+	if (ret)
+		return log_msg_ret("p2sb", ret);
+	ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &sa);
+	if (ret)
+		return log_msg_ret("northbridge", ret);
+	gd->baudrate = CONFIG_BAUDRATE;
+	ret = uclass_first_device_err(UCLASS_SERIAL, &serial);
+	if (ret)
+		return log_msg_ret("serial", ret);
+	if (CONFIG_IS_ENABLED(SPI_FLASH_SUPPORT)) {
+		ret = uclass_first_device_err(UCLASS_SPI, &spi);
+		if (ret)
+			return log_msg_ret("SPI", ret);
+	} else {
+		/* Alternative code if we don't have SPI in TPL */
+		if (IS_ENABLED(CONFIG_APL_BOOT_FROM_FAST_SPI_FLASH))
+			printf("Warning: Enable APL_SPI_FLASHBOOT to use SPI-flash driver in TPL");
+		ret = fast_spi_cache_bios_region();
+		if (ret)
+			return log_msg_ret("BIOS cache", ret);
+	}
+	ret = pmc_disable_tco(pmc);
+	if (ret)
+		return log_msg_ret("disable TCO", ret);
+	ret = pmc_gpe_init(pmc);
+	if (ret)
+		return log_msg_ret("pmc_gpe", ret);
+	ret = uclass_first_device_err(UCLASS_LPC, &lpc);
+	if (ret)
+		return log_msg_ret("lpc", ret);
+
+	early_ec_init();
+
+	return 0;
+}
+
+/*
+ * Enables several BARs and devices which are needed for memory init
+ * - MCH_BASE_ADDR is needed in order to talk to the memory controller
+ * - HPET is enabled because FSP wants to store a pointer to global data in the
+ *   HPET comparator register
+ */
+static int arch_cpu_init_spl(void)
+{
+	struct udevice *pmc, *p2sb;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_ACPI_PMC, &pmc);
+	if (ret)
+		return log_msg_ret("Could not probe PMC", ret);
+	ret = uclass_first_device_err(UCLASS_P2SB, &p2sb);
+	if (ret)
+		return log_msg_ret("Cannot set up p2sb", ret);
+
+	lpc_io_setup_comm_a_b();
+
+	/* TODO(sjg@chromium.org): Enable upper RTC bank here */
+
+	ret = pmc_init(pmc);
+	if (ret < 0)
+		return log_msg_ret("Could not init PMC", ret);
+#ifdef CONFIG_HAVE_ACPI_RESUME
+	ret = pmc_prev_sleep_state(pmc);
+	if (ret < 0)
+		return log_msg_ret("Could not get PMC sleep state", ret);
+	gd->arch.prev_sleep_state = ret;
+#endif
+
+	return 0;
+}
+
+int arch_cpu_init(void)
+{
+	int ret = 0;
+
+	if (spl_phase() == PHASE_TPL)
+		ret = arch_cpu_init_tpl();
+	else if (spl_phase() == PHASE_SPL)
+		ret = arch_cpu_init_spl();
+	if (ret)
+		printf("%s: Error %d\n", __func__, ret);
+
+	return ret;
+}
diff --git a/arch/x86/cpu/apollolake/fsp_m.c b/arch/x86/cpu/apollolake/fsp_m.c
new file mode 100644
index 0000000..5308af8
--- /dev/null
+++ b/arch/x86/cpu/apollolake/fsp_m.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/arch/iomap.h>
+#include <asm/arch/fsp/fsp_configs.h>
+#include <asm/arch/fsp/fsp_m_upd.h>
+#include <asm/fsp2/fsp_internal.h>
+#include <dm/uclass-internal.h>
+
+/*
+ * ODT settings:
+ * If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A and HIGH for ODT_B,
+ * choose ODT_A_B_HIGH_HIGH. If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A
+ * and LOW for ODT_B, choose ODT_A_B_HIGH_LOW.
+ *
+ * Note that the enum values correspond to the interpreted UPD fields
+ * within Ch[3:0]_OdtConfig parameters.
+ */
+enum {
+	ODT_A_B_HIGH_LOW	= 0 << 1,
+	ODT_A_B_HIGH_HIGH	= 1 << 1,
+	N_WR_24			= 1 << 5,
+};
+
+/*
+ * LPDDR4 helper routines for configuring the memory UPD for LPDDR4 operation.
+ * There are four physical LPDDR4 channels, each 32-bits wide. There are two
+ * logical channels using two physical channels together to form a 64-bit
+ * interface to memory for each logical channel.
+ */
+
+enum {
+	LP4_PHYS_CH0A,
+	LP4_PHYS_CH0B,
+	LP4_PHYS_CH1A,
+	LP4_PHYS_CH1B,
+
+	LP4_NUM_PHYS_CHANNELS,
+};
+
+/*
+ * The DQs within a physical channel can be bit-swizzled within each byte.
+ * Within a channel the bytes can be swapped, but the DQs need to be routed
+ * with the corresponding DQS (strobe).
+ */
+enum {
+	LP4_DQS0,
+	LP4_DQS1,
+	LP4_DQS2,
+	LP4_DQS3,
+
+	LP4_NUM_BYTE_LANES,
+	DQ_BITS_PER_DQS		= 8,
+};
+
+/* Provide bit swizzling per DQS and byte swapping within a channel */
+struct lpddr4_chan_swizzle_cfg {
+	u8 dqs[LP4_NUM_BYTE_LANES][DQ_BITS_PER_DQS];
+};
+
+struct lpddr4_swizzle_cfg {
+	struct lpddr4_chan_swizzle_cfg phys[LP4_NUM_PHYS_CHANNELS];
+};
+
+static void setup_sdram(struct fsp_m_config *cfg,
+			const struct lpddr4_swizzle_cfg *swizzle_cfg)
+{
+	const struct lpddr4_chan_swizzle_cfg *sch;
+	/* Number of bytes to copy per DQS */
+	const size_t sz = DQ_BITS_PER_DQS;
+	int chan;
+
+	cfg->memory_down = 1;
+	cfg->scrambler_support = 1;
+	cfg->channel_hash_mask = 0x36;
+	cfg->slice_hash_mask = 9;
+	cfg->interleaved_mode = 2;
+	cfg->channels_slices_enable = 0;
+	cfg->min_ref_rate2x_enable = 0;
+	cfg->dual_rank_support_enable = 1;
+
+	/* LPDDR4 is memory down so no SPD addresses */
+	cfg->dimm0_spd_address = 0;
+	cfg->dimm1_spd_address = 0;
+
+	for (chan = 0; chan < 4; chan++) {
+		struct fsp_ram_channel *ch = &cfg->chan[chan];
+
+		ch->rank_enable = 1;
+		ch->device_width = 1;
+		ch->dram_density = 2;
+		ch->option = 3;
+		ch->odt_config = ODT_A_B_HIGH_HIGH;
+	}
+
+	/*
+	 * CH0_DQB byte lanes in the bit swizzle configuration field are
+	 * not 1:1. The mapping within the swizzling field is:
+	 *   indices [0:7]   - byte lane 1 (DQS1) DQ[8:15]
+	 *   indices [8:15]  - byte lane 0 (DQS0) DQ[0:7]
+	 *   indices [16:23] - byte lane 3 (DQS3) DQ[24:31]
+	 *   indices [24:31] - byte lane 2 (DQS2) DQ[16:23]
+	 */
+	sch = &swizzle_cfg->phys[LP4_PHYS_CH0B];
+	memcpy(&cfg->ch_bit_swizzling[0][0], &sch->dqs[LP4_DQS1], sz);
+	memcpy(&cfg->ch_bit_swizzling[0][8], &sch->dqs[LP4_DQS0], sz);
+	memcpy(&cfg->ch_bit_swizzling[0][16], &sch->dqs[LP4_DQS3], sz);
+	memcpy(&cfg->ch_bit_swizzling[0][24], &sch->dqs[LP4_DQS2], sz);
+
+	/*
+	 * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1.
+	 */
+	sch = &swizzle_cfg->phys[LP4_PHYS_CH0A];
+	memcpy(&cfg->ch_bit_swizzling[1][0], &sch->dqs[LP4_DQS0], sz);
+	memcpy(&cfg->ch_bit_swizzling[1][8], &sch->dqs[LP4_DQS1], sz);
+	memcpy(&cfg->ch_bit_swizzling[1][16], &sch->dqs[LP4_DQS2], sz);
+	memcpy(&cfg->ch_bit_swizzling[1][24], &sch->dqs[LP4_DQS3], sz);
+
+	sch = &swizzle_cfg->phys[LP4_PHYS_CH1B];
+	memcpy(&cfg->ch_bit_swizzling[2][0], &sch->dqs[LP4_DQS1], sz);
+	memcpy(&cfg->ch_bit_swizzling[2][8], &sch->dqs[LP4_DQS0], sz);
+	memcpy(&cfg->ch_bit_swizzling[2][16], &sch->dqs[LP4_DQS3], sz);
+	memcpy(&cfg->ch_bit_swizzling[2][24], &sch->dqs[LP4_DQS2], sz);
+
+	/*
+	 * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1.
+	 */
+	sch = &swizzle_cfg->phys[LP4_PHYS_CH1A];
+	memcpy(&cfg->ch_bit_swizzling[3][0], &sch->dqs[LP4_DQS0], sz);
+	memcpy(&cfg->ch_bit_swizzling[3][8], &sch->dqs[LP4_DQS1], sz);
+	memcpy(&cfg->ch_bit_swizzling[3][16], &sch->dqs[LP4_DQS2], sz);
+	memcpy(&cfg->ch_bit_swizzling[3][24], &sch->dqs[LP4_DQS3], sz);
+}
+
+int fspm_update_config(struct udevice *dev, struct fspm_upd *upd)
+{
+	struct fsp_m_config *cfg = &upd->config;
+	struct fspm_arch_upd *arch = &upd->arch;
+
+	arch->nvs_buffer_ptr = NULL;
+	prepare_mrc_cache(upd);
+	arch->stack_base = (void *)0xfef96000;
+	arch->boot_loader_tolum_size = 0;
+
+	arch->boot_mode = FSP_BOOT_WITH_FULL_CONFIGURATION;
+	cfg->serial_debug_port_type = 2;
+	cfg->serial_debug_port_device = 2;
+	cfg->serial_debug_port_stride_size = 2;
+	cfg->serial_debug_port_address = 0;
+
+	cfg->package = 1;
+	/* Don't enforce a memory size limit */
+	cfg->memory_size_limit = 0;
+	cfg->low_memory_max_value = 2048;  /* 2 GB */
+	/* No restrictions on memory above 4GiB */
+	cfg->high_memory_max_value = 0;
+
+	/* Always default to attempt to use saved training data */
+	cfg->disable_fast_boot = 0;
+
+	const u8 *swizzle_data;
+
+	swizzle_data = dev_read_u8_array_ptr(dev, "lpddr4-swizzle",
+					     LP4_NUM_BYTE_LANES *
+					     DQ_BITS_PER_DQS *
+					     LP4_NUM_PHYS_CHANNELS);
+	if (!swizzle_data)
+		return log_msg_ret("Cannot read swizzel data", -EINVAL);
+
+	setup_sdram(cfg, (struct lpddr4_swizzle_cfg *)swizzle_data);
+
+	cfg->pre_mem_gpio_table_ptr = 0;
+
+	cfg->profile = 0xb;
+	cfg->msg_level_mask = 0;
+
+	/* other */
+	cfg->skip_cse_rbp = 1;
+	cfg->periodic_retraining_disable = 0;
+	cfg->enable_s3_heci2 = 0;
+
+	return 0;
+}
+
+/*
+ * The FSP-M binary appears to break the SPI controller. It can be fixed by
+ * writing the BAR again, so do that here
+ */
+int fspm_done(struct udevice *dev)
+{
+	struct udevice *spi;
+	int ret;
+
+	/* Don't probe the device, since that reads the BAR */
+	ret = uclass_find_first_device(UCLASS_SPI, &spi);
+	if (ret)
+		return log_msg_ret("SPI", ret);
+	if (!spi)
+		return log_msg_ret("no SPI", -ENODEV);
+
+	dm_pci_write_config32(spi, PCI_BASE_ADDRESS_0,
+			      IOMAP_SPI_BASE | PCI_BASE_ADDRESS_SPACE_MEMORY);
+
+	return 0;
+}
diff --git a/arch/x86/cpu/apollolake/fsp_s.c b/arch/x86/cpu/apollolake/fsp_s.c
new file mode 100644
index 0000000..9804227
--- /dev/null
+++ b/arch/x86/cpu/apollolake/fsp_s.c
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <acpi_s3.h>
+#include <binman.h>
+#include <dm.h>
+#include <irq.h>
+#include <asm/intel_pinctrl.h>
+#include <asm/io.h>
+#include <asm/intel_regs.h>
+#include <asm/msr.h>
+#include <asm/msr-index.h>
+#include <asm/pci.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/systemagent.h>
+#include <asm/arch/fsp/fsp_configs.h>
+#include <asm/arch/fsp/fsp_s_upd.h>
+
+#define PCH_P2SB_E0		0xe0
+#define HIDE_BIT		BIT(0)
+
+#define INTEL_GSPI_MAX		3
+#define INTEL_I2C_DEV_MAX	8
+#define MAX_USB2_PORTS		8
+
+enum {
+	CHIPSET_LOCKDOWN_FSP = 0, /* FSP handles locking per UPDs */
+	CHIPSET_LOCKDOWN_COREBOOT, /* coreboot handles locking */
+};
+
+enum i2c_speed {
+	I2C_SPEED_STANDARD	= 100000,
+	I2C_SPEED_FAST		= 400000,
+	I2C_SPEED_FAST_PLUS	= 1000000,
+	I2C_SPEED_HIGH		= 3400000,
+	I2C_SPEED_FAST_ULTRA	= 5000000,
+};
+
+/*
+ * Timing values are in units of clock period, with the clock speed
+ * provided by the SOC
+ *
+ * TODO(sjg@chromium.org): Connect this up to the I2C driver
+ */
+struct dw_i2c_speed_config {
+	enum i2c_speed speed;
+	/* SCL high and low period count */
+	u16 scl_lcnt;
+	u16 scl_hcnt;
+	/*
+	 * SDA hold time should be 300ns in standard and fast modes
+	 * and long enough for deterministic logic level change in
+	 * fast-plus and high speed modes.
+	 *
+	 *  [15:0] SDA TX Hold Time
+	 * [23:16] SDA RX Hold Time
+	 */
+	u32 sda_hold;
+};
+
+/* Serial IRQ control. SERIRQ_QUIET is the default (0) */
+enum serirq_mode {
+	SERIRQ_QUIET,
+	SERIRQ_CONTINUOUS,
+	SERIRQ_OFF,
+};
+
+/*
+ * This I2C controller has support for 3 independent speed configs but can
+ * support both FAST_PLUS and HIGH speeds through the same set of speed
+ * config registers.  These are treated separately so the speed config values
+ * can be provided via ACPI to the OS.
+ */
+#define DW_I2C_SPEED_CONFIG_COUNT	4
+
+struct dw_i2c_bus_config {
+	/* Bus should be enabled in TPL with temporary base */
+	int early_init;
+	/* Bus speed in Hz, default is I2C_SPEED_FAST (400 KHz) */
+	enum i2c_speed speed;
+	/*
+	 * If rise_time_ns is non-zero the calculations for lcnt and hcnt
+	 * registers take into account the times of the bus. However, if
+	 * there is a match in speed_config those register values take
+	 * precedence
+	 */
+	int rise_time_ns;
+	int fall_time_ns;
+	int data_hold_time_ns;
+	/* Specific bus speed configuration */
+	struct dw_i2c_speed_config speed_config[DW_I2C_SPEED_CONFIG_COUNT];
+};
+
+struct gspi_cfg {
+	/* Bus speed in MHz */
+	u32 speed_mhz;
+	/* Bus should be enabled prior to ramstage with temporary base */
+	u8 early_init;
+};
+
+/*
+ * This structure will hold data required by common blocks.
+ * These are soc specific configurations which will be filled by soc.
+ * We'll fill this structure once during init and use the data in common block.
+ */
+struct soc_intel_common_config {
+	int chipset_lockdown;
+	struct gspi_cfg gspi[INTEL_GSPI_MAX];
+	struct dw_i2c_bus_config i2c[INTEL_I2C_DEV_MAX];
+};
+
+enum pnp_settings {
+	PNP_PERF,
+	PNP_POWER,
+	PNP_PERF_POWER,
+};
+
+struct usb2_eye_per_port {
+	u8 per_port_tx_pe_half;
+	u8 per_port_pe_txi_set;
+	u8 per_port_txi_set;
+	u8 hs_skew_sel;
+	u8 usb_tx_emphasis_en;
+	u8 per_port_rxi_set;
+	u8 hs_npre_drv_sel;
+	u8 override_en;
+};
+
+struct apl_config {
+	/* Common structure containing soc config data required by common code*/
+	struct soc_intel_common_config common_soc_config;
+
+	/*
+	 * Mapping from PCIe root port to CLKREQ input on the SOC. The SOC has
+	 * four CLKREQ inputs, but six root ports. Root ports without an
+	 * associated CLKREQ signal must be marked with "CLKREQ_DISABLED"
+	 */
+	u8 pcie_rp_clkreq_pin[MAX_PCIE_PORTS];
+
+	/* Enable/disable hot-plug for root ports (0 = disable, 1 = enable) */
+	u8 pcie_rp_hotplug_enable[MAX_PCIE_PORTS];
+
+	/* De-emphasis enable configuration for each PCIe root port */
+	u8 pcie_rp_deemphasis_enable[MAX_PCIE_PORTS];
+
+	/*
+	 * [14:8] DDR mode Number of dealy elements.Each = 125pSec.
+	 * [6:0] SDR mode Number of dealy elements.Each = 125pSec.
+	 */
+	u32 emmc_tx_cmd_cntl;
+
+	/*
+	 * [14:8] HS400 mode Number of dealy elements.Each = 125pSec.
+	 * [6:0] SDR104/HS200 mode Number of dealy elements.Each = 125pSec.
+	 */
+	u32 emmc_tx_data_cntl1;
+
+	/*
+	 * [30:24] SDR50 mode Number of dealy elements.Each = 125pSec.
+	 * [22:16] DDR50 mode Number of dealy elements.Each = 125pSec.
+	 * [14:8] SDR25/HS50 mode Number of dealy elements.Each = 125pSec.
+	 * [6:0] SDR12/Compatibility mode Number of dealy elements.
+	 *       Each = 125pSec.
+	 */
+	u32 emmc_tx_data_cntl2;
+
+	/*
+	 * [30:24] SDR50 mode Number of dealy elements.Each = 125pSec.
+	 * [22:16] DDR50 mode Number of dealy elements.Each = 125pSec.
+	 * [14:8] SDR25/HS50 mode Number of dealy elements.Each = 125pSec.
+	 * [6:0] SDR12/Compatibility mode Number of dealy elements.
+	 *       Each = 125pSec.
+	 */
+	u32 emmc_rx_cmd_data_cntl1;
+
+	/*
+	 * [14:8] HS400 mode 1 Number of dealy elements.Each = 125pSec.
+	 * [6:0] HS400 mode 2 Number of dealy elements.Each = 125pSec.
+	 */
+	u32 emmc_rx_strobe_cntl;
+
+	/*
+	 * [13:8] Auto Tuning mode Number of dealy elements.Each = 125pSec.
+	 * [6:0] SDR104/HS200 Number of dealy elements.Each = 125pSec.
+	 */
+	u32 emmc_rx_cmd_data_cntl2;
+
+	/* Select the eMMC max speed allowed */
+	u32 emmc_host_max_speed;
+
+	/* Specifies on which IRQ the SCI will internally appear */
+	u32 sci_irq;
+
+	/* Configure serial IRQ (SERIRQ) line */
+	enum serirq_mode serirq_mode;
+
+	/* Configure LPSS S0ix Enable */
+	bool lpss_s0ix_enable;
+
+	/* Enable DPTF support */
+	bool dptf_enable;
+
+	/* TCC activation offset value in degrees Celsius */
+	int tcc_offset;
+
+	/*
+	 * Configure Audio clk gate and power gate
+	 * IOSF-SB port ID 92 offset 0x530 [5] and [3]
+	 */
+	bool hdaudio_clk_gate_enable;
+	bool hdaudio_pwr_gate_enable;
+	bool hdaudio_bios_config_lockdown;
+
+	/* SLP S3 minimum assertion width */
+	int slp_s3_assertion_width_usecs;
+
+	/* GPIO pin for PERST_0 */
+	u32 prt0_gpio;
+
+	/* USB2 eye diagram settings per port */
+	struct usb2_eye_per_port usb2eye[MAX_USB2_PORTS];
+
+	/* GPIO SD card detect pin */
+	unsigned int sdcard_cd_gpio;
+
+	/*
+	 * PRMRR size setting with three options
+	 *  0x02000000 - 32MiB
+	 *  0x04000000 - 64MiB
+	 *  0x08000000 - 128MiB
+	 */
+	u32 PrmrrSize;
+
+	/*
+	 * Enable SGX feature.
+	 * Enabling SGX feature is 2 step process,
+	 * (1) set sgx_enable = 1
+	 * (2) set PrmrrSize to supported size
+	 */
+	bool sgx_enable;
+
+	/*
+	 * Select PNP Settings.
+	 * (0) Performance,
+	 * (1) Power
+	 * (2) Power & Performance
+	 */
+	enum pnp_settings pnp_settings;
+
+	/*
+	 * PMIC PCH_PWROK delay configuration - IPC Configuration
+	 * Upd for changing PCH_PWROK delay configuration : I2C_Slave_Address
+	 * (31:24) + Register_Offset (23:16) + OR Value (15:8) + AND Value (7:0)
+	 */
+	u32 pmic_pmc_ipc_ctrl;
+
+	/*
+	 * Options to disable XHCI Link Compliance Mode. Default is FALSE to not
+	 * disable Compliance Mode. Set TRUE to disable Compliance Mode.
+	 * 0:FALSE(Default), 1:True.
+	 */
+	bool disable_compliance_mode;
+
+	/*
+	 * Options to change USB3 ModPhy setting for the Integrated Filter (IF)
+	 * value. Default is 0 to not changing default IF value (0x12). Set
+	 * value with the range from 0x01 to 0xff to change IF value.
+	 */
+	u32 mod_phy_if_value;
+
+	/*
+	 * Options to bump USB3 LDO voltage. Default is FALSE to not increasing
+	 * LDO voltage. Set TRUE to increase LDO voltage with 40mV.
+	 * 0:FALSE (default), 1:True.
+	 */
+	bool mod_phy_voltage_bump;
+
+	/*
+	 * Options to adjust PMIC Vdd2 voltage. Default is 0 to not adjusting
+	 * the PMIC Vdd2 default voltage 1.20v. Upd for changing Vdd2 Voltage
+	 * configuration: I2C_Slave_Address (31:23) + Register_Offset (23:16)
+	 * + OR Value (15:8) + AND Value (7:0) through BUCK5_VID[3:2]:
+	 * 00=1.10v, 01=1.15v, 10=1.24v, 11=1.20v (default).
+	 */
+	u32 pmic_vdd2_voltage;
+
+	/* Option to enable VTD feature */
+	bool enable_vtd;
+};
+
+static int get_config(struct udevice *dev, struct apl_config *apl)
+{
+	const u8 *ptr;
+	ofnode node;
+	u32 emmc[4];
+	int ret;
+
+	memset(apl, '\0', sizeof(*apl));
+
+	node = dev_read_subnode(dev, "fsp-s");
+	if (!ofnode_valid(node))
+		return log_msg_ret("fsp-s settings", -ENOENT);
+
+	ptr = ofnode_read_u8_array_ptr(node, "pcie-rp-clkreq-pin",
+				       MAX_PCIE_PORTS);
+	if (!ptr)
+		return log_msg_ret("pcie-rp-clkreq-pin", -EINVAL);
+	memcpy(apl->pcie_rp_clkreq_pin, ptr, MAX_PCIE_PORTS);
+
+	ret = ofnode_read_u32(node, "prt0-gpio", &apl->prt0_gpio);
+	if (ret)
+		return log_msg_ret("prt0-gpio", ret);
+	ret = ofnode_read_u32(node, "sdcard-cd-gpio", &apl->sdcard_cd_gpio);
+	if (ret)
+		return log_msg_ret("sdcard-cd-gpio", ret);
+
+	ret = ofnode_read_u32_array(node, "emmc", emmc, ARRAY_SIZE(emmc));
+	if (ret)
+		return log_msg_ret("emmc", ret);
+	apl->emmc_tx_data_cntl1 = emmc[0];
+	apl->emmc_tx_data_cntl2 = emmc[1];
+	apl->emmc_rx_cmd_data_cntl1 = emmc[2];
+	apl->emmc_rx_cmd_data_cntl2 = emmc[3];
+
+	apl->dptf_enable = ofnode_read_bool(node, "dptf-enable");
+
+	apl->hdaudio_clk_gate_enable = ofnode_read_bool(node,
+						"hdaudio-clk-gate-enable");
+	apl->hdaudio_pwr_gate_enable = ofnode_read_bool(node,
+						"hdaudio-pwr-gate-enable");
+	apl->hdaudio_bios_config_lockdown = ofnode_read_bool(node,
+					     "hdaudio-bios-config-lockdown");
+	apl->lpss_s0ix_enable = ofnode_read_bool(node, "lpss-s0ix-enable");
+
+	/* Santa */
+	apl->usb2eye[1].per_port_pe_txi_set = 7;
+	apl->usb2eye[1].per_port_txi_set = 2;
+
+	return 0;
+}
+
+static void apl_fsp_silicon_init_params_cb(struct apl_config *apl,
+					   struct fsp_s_config *cfg)
+{
+	u8 port;
+
+	for (port = 0; port < MAX_USB2_PORTS; port++) {
+		if (apl->usb2eye[port].per_port_tx_pe_half)
+			cfg->port_usb20_per_port_tx_pe_half[port] =
+				apl->usb2eye[port].per_port_tx_pe_half;
+
+		if (apl->usb2eye[port].per_port_pe_txi_set)
+			cfg->port_usb20_per_port_pe_txi_set[port] =
+				apl->usb2eye[port].per_port_pe_txi_set;
+
+		if (apl->usb2eye[port].per_port_txi_set)
+			cfg->port_usb20_per_port_txi_set[port] =
+				apl->usb2eye[port].per_port_txi_set;
+
+		if (apl->usb2eye[port].hs_skew_sel)
+			cfg->port_usb20_hs_skew_sel[port] =
+				apl->usb2eye[port].hs_skew_sel;
+
+		if (apl->usb2eye[port].usb_tx_emphasis_en)
+			cfg->port_usb20_i_usb_tx_emphasis_en[port] =
+				apl->usb2eye[port].usb_tx_emphasis_en;
+
+		if (apl->usb2eye[port].per_port_rxi_set)
+			cfg->port_usb20_per_port_rxi_set[port] =
+				apl->usb2eye[port].per_port_rxi_set;
+
+		if (apl->usb2eye[port].hs_npre_drv_sel)
+			cfg->port_usb20_hs_npre_drv_sel[port] =
+				apl->usb2eye[port].hs_npre_drv_sel;
+	}
+}
+
+int fsps_update_config(struct udevice *dev, ulong rom_offset,
+		       struct fsps_upd *upd)
+{
+	struct fsp_s_config *cfg = &upd->config;
+	struct apl_config *apl;
+	struct binman_entry vbt;
+	void *buf;
+	int ret;
+
+	ret = binman_entry_find("intel-vbt", &vbt);
+	if (ret)
+		return log_msg_ret("Cannot find VBT", ret);
+	vbt.image_pos += rom_offset;
+	buf = malloc(vbt.size);
+	if (!buf)
+		return log_msg_ret("Alloc VBT", -ENOMEM);
+
+	/*
+	 * Load VBT before devicetree-specific config. This only supports
+	 * memory-mapped SPI at present.
+	 */
+	bootstage_start(BOOTSTAGE_ID_ACCUM_MMAP_SPI, "mmap_spi");
+	memcpy(buf, (void *)vbt.image_pos, vbt.size);
+	bootstage_accum(BOOTSTAGE_ID_ACCUM_MMAP_SPI);
+	if (*(u32 *)buf != VBT_SIGNATURE)
+		return log_msg_ret("VBT signature", -EINVAL);
+	cfg->graphics_config_ptr = (ulong)buf;
+
+	apl = malloc(sizeof(*apl));
+	if (!apl)
+		return log_msg_ret("config", -ENOMEM);
+	get_config(dev, apl);
+
+	cfg->ish_enable = 0;
+	cfg->enable_sata = 0;
+	cfg->pcie_root_port_en[2] = 0;
+	cfg->pcie_rp_hot_plug[2] = 0;
+	cfg->pcie_root_port_en[3] = 0;
+	cfg->pcie_rp_hot_plug[3] = 0;
+	cfg->pcie_root_port_en[4] = 0;
+	cfg->pcie_rp_hot_plug[4] = 0;
+	cfg->pcie_root_port_en[5] = 0;
+	cfg->pcie_rp_hot_plug[5] = 0;
+	cfg->pcie_root_port_en[1] = 0;
+	cfg->pcie_rp_hot_plug[1] = 0;
+	cfg->usb_otg = 0;
+	cfg->i2c6_enable = 0;
+	cfg->i2c7_enable = 0;
+	cfg->hsuart3_enable = 0;
+	cfg->spi1_enable = 0;
+	cfg->spi2_enable = 0;
+	cfg->sdio_enabled = 0;
+
+	memcpy(cfg->pcie_rp_clk_req_number, apl->pcie_rp_clkreq_pin,
+	       sizeof(cfg->pcie_rp_clk_req_number));
+
+	memcpy(cfg->pcie_rp_hot_plug, apl->pcie_rp_hotplug_enable,
+	       sizeof(cfg->pcie_rp_hot_plug));
+
+	switch (apl->serirq_mode) {
+	case SERIRQ_QUIET:
+		cfg->sirq_enable = 1;
+		cfg->sirq_mode = 0;
+		break;
+	case SERIRQ_CONTINUOUS:
+		cfg->sirq_enable = 1;
+		cfg->sirq_mode = 1;
+		break;
+	case SERIRQ_OFF:
+	default:
+		cfg->sirq_enable = 0;
+		break;
+	}
+
+	if (apl->emmc_tx_cmd_cntl)
+		cfg->emmc_tx_cmd_cntl = apl->emmc_tx_cmd_cntl;
+	if (apl->emmc_tx_data_cntl1)
+		cfg->emmc_tx_data_cntl1 = apl->emmc_tx_data_cntl1;
+	if (apl->emmc_tx_data_cntl2)
+		cfg->emmc_tx_data_cntl2 = apl->emmc_tx_data_cntl2;
+	if (apl->emmc_rx_cmd_data_cntl1)
+		cfg->emmc_rx_cmd_data_cntl1 = apl->emmc_rx_cmd_data_cntl1;
+	if (apl->emmc_rx_strobe_cntl)
+		cfg->emmc_rx_strobe_cntl = apl->emmc_rx_strobe_cntl;
+	if (apl->emmc_rx_cmd_data_cntl2)
+		cfg->emmc_rx_cmd_data_cntl2 = apl->emmc_rx_cmd_data_cntl2;
+	if (apl->emmc_host_max_speed)
+		cfg->e_mmc_host_max_speed = apl->emmc_host_max_speed;
+
+	cfg->lpss_s0ix_enable = apl->lpss_s0ix_enable;
+
+	cfg->skip_mp_init = true;
+
+	/* Disable setting of EISS bit in FSP */
+	cfg->spi_eiss = 0;
+
+	/* Disable FSP from locking access to the RTC NVRAM */
+	cfg->rtc_lock = 0;
+
+	/* Enable Audio clk gate and power gate */
+	cfg->hd_audio_clk_gate = apl->hdaudio_clk_gate_enable;
+	cfg->hd_audio_pwr_gate = apl->hdaudio_pwr_gate_enable;
+	/* Bios config lockdown Audio clk and power gate */
+	cfg->bios_cfg_lock_down = apl->hdaudio_bios_config_lockdown;
+	apl_fsp_silicon_init_params_cb(apl, cfg);
+
+	cfg->usb_otg = true;
+	cfg->vtd_enable = apl->enable_vtd;
+
+	return 0;
+}
+
+static void p2sb_set_hide_bit(pci_dev_t dev, int hide)
+{
+	pci_x86_clrset_config(dev, PCH_P2SB_E0 + 1, HIDE_BIT,
+			      hide ? HIDE_BIT : 0, PCI_SIZE_8);
+}
+
+/* Configure package power limits */
+static int set_power_limits(struct udevice *dev)
+{
+	msr_t rapl_msr_reg, limit;
+	u32 power_unit;
+	u32 tdp, min_power, max_power;
+	u32 pl2_val;
+	u32 override_tdp[2];
+	int ret;
+
+	/* Get units */
+	rapl_msr_reg = msr_read(MSR_PKG_POWER_SKU_UNIT);
+	power_unit = 1 << (rapl_msr_reg.lo & 0xf);
+
+	/* Get power defaults for this SKU */
+	rapl_msr_reg = msr_read(MSR_PKG_POWER_SKU);
+	tdp = rapl_msr_reg.lo & PKG_POWER_LIMIT_MASK;
+	pl2_val = rapl_msr_reg.hi & PKG_POWER_LIMIT_MASK;
+	min_power = (rapl_msr_reg.lo >> 16) & PKG_POWER_LIMIT_MASK;
+	max_power = rapl_msr_reg.hi & PKG_POWER_LIMIT_MASK;
+
+	if (min_power > 0 && tdp < min_power)
+		tdp = min_power;
+
+	if (max_power > 0 && tdp > max_power)
+		tdp = max_power;
+
+	ret = dev_read_u32_array(dev, "tdp-pl-override-mw", override_tdp,
+				 ARRAY_SIZE(override_tdp));
+	if (ret)
+		return log_msg_ret("tdp-pl-override-mw", ret);
+
+	/* Set PL1 override value */
+	if (override_tdp[0])
+		tdp = override_tdp[0] * power_unit / 1000;
+
+	/* Set PL2 override value */
+	if (override_tdp[1])
+		pl2_val = override_tdp[1] * power_unit / 1000;
+
+	/* Set long term power limit to TDP */
+	limit.lo = tdp & PKG_POWER_LIMIT_MASK;
+	/* Set PL1 Pkg Power clamp bit */
+	limit.lo |= PKG_POWER_LIMIT_CLAMP;
+
+	limit.lo |= PKG_POWER_LIMIT_EN;
+	limit.lo |= (MB_POWER_LIMIT1_TIME_DEFAULT &
+		PKG_POWER_LIMIT_TIME_MASK) << PKG_POWER_LIMIT_TIME_SHIFT;
+
+	/* Set short term power limit PL2 */
+	limit.hi = pl2_val & PKG_POWER_LIMIT_MASK;
+	limit.hi |= PKG_POWER_LIMIT_EN;
+
+	/* Program package power limits in RAPL MSR */
+	msr_write(MSR_PKG_POWER_LIMIT, limit);
+	log_info("RAPL PL1 %d.%dW\n", tdp / power_unit,
+		 100 * (tdp % power_unit) / power_unit);
+	log_info("RAPL PL2 %d.%dW\n", pl2_val / power_unit,
+		 100 * (pl2_val % power_unit) / power_unit);
+
+	/*
+	 * Sett RAPL MMIO register for Power limits. RAPL driver is using MSR
+	 * instead of MMIO, so disable LIMIT_EN bit for MMIO
+	 */
+	writel(limit.lo & ~PKG_POWER_LIMIT_EN, MCHBAR_REG(MCHBAR_RAPL_PPL));
+	writel(limit.hi & ~PKG_POWER_LIMIT_EN, MCHBAR_REG(MCHBAR_RAPL_PPL + 4));
+
+	return 0;
+}
+
+int p2sb_unhide(void)
+{
+	pci_dev_t dev = PCI_BDF(0, 0xd, 0);
+	ulong val;
+
+	p2sb_set_hide_bit(dev, 0);
+
+	pci_x86_read_config(dev, PCI_VENDOR_ID, &val, PCI_SIZE_16);
+
+	if (val != PCI_VENDOR_ID_INTEL)
+		return log_msg_ret("p2sb unhide", -EIO);
+
+	return 0;
+}
+
+/* Overwrites the SCI IRQ if another IRQ number is given by device tree */
+static void set_sci_irq(void)
+{
+	/* Skip this for now */
+}
+
+int arch_fsps_preinit(void)
+{
+	struct udevice *itss;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_IRQ, &itss);
+	if (ret)
+		return log_msg_ret("no itss", ret);
+	/*
+	 * Snapshot the current GPIO IRQ polarities. FSP is setting a default
+	 * policy that doesn't honour boards' requirements
+	 */
+	irq_snapshot_polarities(itss);
+
+	/*
+	 * Clear the GPI interrupt status and enable registers. These
+	 * registers do not get reset to default state when booting from S5.
+	 */
+	ret = pinctrl_gpi_clear_int_cfg();
+	if (ret)
+		return log_msg_ret("gpi_clear", ret);
+
+	return 0;
+}
+
+int arch_fsp_init_r(void)
+{
+#ifdef CONFIG_HAVE_ACPI_RESUME
+	bool s3wake = gd->arch.prev_sleep_state == ACPI_S3;
+#else
+	bool s3wake = false;
+#endif
+	struct udevice *dev, *itss;
+	int ret;
+
+	/*
+	 * This must be called before any devices are probed. Put any probing
+	 * into arch_fsps_preinit() above.
+	 *
+	 * We don't use CONFIG_APL_BOOT_FROM_FAST_SPI_FLASH here since it will
+	 * force PCI to be probed.
+	 */
+	ret = fsp_silicon_init(s3wake, false);
+	if (ret)
+		return ret;
+
+	ret = uclass_first_device_err(UCLASS_IRQ, &itss);
+	if (ret)
+		return log_msg_ret("no itss", ret);
+	/* Restore GPIO IRQ polarities back to previous settings */
+	irq_restore_polarities(itss);
+
+	/* soc_init() */
+	ret = p2sb_unhide();
+	if (ret)
+		return log_msg_ret("unhide p2sb", ret);
+
+	/* Set RAPL MSR for Package power limits*/
+	ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &dev);
+	if (ret)
+		return log_msg_ret("Cannot get northbridge", ret);
+	set_power_limits(dev);
+
+	/*
+	 * FSP-S routes SCI to IRQ 9. With the help of this function you can
+	 * select another IRQ for SCI.
+	 */
+	set_sci_irq();
+
+	return 0;
+}
diff --git a/arch/x86/cpu/apollolake/hostbridge.c b/arch/x86/cpu/apollolake/hostbridge.c
new file mode 100644
index 0000000..793853d
--- /dev/null
+++ b/arch/x86/cpu/apollolake/hostbridge.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <spl.h>
+#include <asm/intel_pinctrl.h>
+#include <asm/intel_regs.h>
+#include <asm/pci.h>
+#include <asm/arch/systemagent.h>
+
+/**
+ * struct apl_hostbridge_platdata - platform data for hostbridge
+ *
+ * @dtplat: Platform data for of-platdata
+ * @early_pads: Early pad data to set up, each (pad, cfg0, cfg1)
+ * @early_pads_count: Number of pads to process
+ * @pciex_region_size: BAR length in bytes
+ * @bdf: Bus/device/function of hostbridge
+ */
+struct apl_hostbridge_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_intel_apl_hostbridge dtplat;
+#endif
+	u32 *early_pads;
+	int early_pads_count;
+	uint pciex_region_size;
+	pci_dev_t bdf;
+};
+
+enum {
+	PCIEXBAR		= 0x60,
+	PCIEXBAR_LENGTH_256MB	= 0,
+	PCIEXBAR_LENGTH_128MB,
+	PCIEXBAR_LENGTH_64MB,
+
+	PCIEXBAR_PCIEXBAREN	= 1 << 0,
+
+	TSEG			= 0xb8,  /* TSEG base */
+};
+
+static int apl_hostbridge_early_init_pinctrl(struct udevice *dev)
+{
+	struct apl_hostbridge_platdata *plat = dev_get_platdata(dev);
+	struct udevice *pinctrl;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_PINCTRL, &pinctrl);
+	if (ret)
+		return log_msg_ret("no hostbridge pinctrl", ret);
+
+	return pinctrl_config_pads(pinctrl, plat->early_pads,
+				   plat->early_pads_count);
+}
+
+static int apl_hostbridge_early_init(struct udevice *dev)
+{
+	struct apl_hostbridge_platdata *plat = dev_get_platdata(dev);
+	u32 region_size;
+	ulong base;
+	u32 reg;
+	int ret;
+
+	/* Set up the MCHBAR */
+	pci_x86_read_config(plat->bdf, MCHBAR, &base, PCI_SIZE_32);
+	base = MCH_BASE_ADDRESS;
+	pci_x86_write_config(plat->bdf, MCHBAR, base | 1, PCI_SIZE_32);
+
+	/*
+	 * The PCIEXBAR is assumed to live in the memory mapped IO space under
+	 * 4GiB
+	 */
+	pci_x86_write_config(plat->bdf, PCIEXBAR + 4, 0, PCI_SIZE_32);
+
+	switch (plat->pciex_region_size >> 20) {
+	default:
+	case 256:
+		region_size = PCIEXBAR_LENGTH_256MB;
+		break;
+	case 128:
+		region_size = PCIEXBAR_LENGTH_128MB;
+		break;
+	case 64:
+		region_size = PCIEXBAR_LENGTH_64MB;
+		break;
+	}
+
+	reg = CONFIG_MMCONF_BASE_ADDRESS | (region_size << 1)
+				| PCIEXBAR_PCIEXBAREN;
+	pci_x86_write_config(plat->bdf, PCIEXBAR, reg, PCI_SIZE_32);
+
+	/*
+	 * TSEG defines the base of SMM range. BIOS determines the base
+	 * of TSEG memory which must be at or below Graphics base of GTT
+	 * Stolen memory, hence its better to clear TSEG register early
+	 * to avoid power on default non-zero value (if any).
+	 */
+	pci_x86_write_config(plat->bdf, TSEG, 0, PCI_SIZE_32);
+
+	ret = apl_hostbridge_early_init_pinctrl(dev);
+	if (ret)
+		return log_msg_ret("pinctrl", ret);
+
+	return 0;
+}
+
+static int apl_hostbridge_ofdata_to_platdata(struct udevice *dev)
+{
+	struct apl_hostbridge_platdata *plat = dev_get_platdata(dev);
+	struct udevice *pinctrl;
+	int ret;
+
+	/*
+	 * The host bridge holds the early pad data needed to get through TPL.
+	 * This is a small amount of data, enough to fit in TPL, so we keep it
+	 * separate from the full pad data, stored in the fsp-s subnode. That
+	 * subnode is not present in TPL, to save space.
+	 */
+	ret = uclass_first_device_err(UCLASS_PINCTRL, &pinctrl);
+	if (ret)
+		return log_msg_ret("no hostbridge PINCTRL", ret);
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	int root;
+
+	/* Get length of PCI Express Region */
+	plat->pciex_region_size = dev_read_u32_default(dev, "pciex-region-size",
+						       256 << 20);
+
+	root = pci_get_devfn(dev);
+	if (root < 0)
+		return log_msg_ret("Cannot get host-bridge PCI address", root);
+	plat->bdf = root;
+
+	ret = pinctrl_read_pads(pinctrl, dev_ofnode(dev), "early-pads",
+				&plat->early_pads, &plat->early_pads_count);
+	if (ret)
+		return log_msg_ret("early-pads", ret);
+#else
+	struct dtd_intel_apl_hostbridge *dtplat = &plat->dtplat;
+	int size;
+
+	plat->pciex_region_size = dtplat->pciex_region_size;
+	plat->bdf = pci_ofplat_get_devfn(dtplat->reg[0]);
+
+	/* Assume that if everything is 0, it is empty */
+	plat->early_pads = dtplat->early_pads;
+	size = ARRAY_SIZE(dtplat->early_pads);
+	plat->early_pads_count = pinctrl_count_pads(pinctrl, plat->early_pads,
+						    size);
+
+#endif
+
+	return 0;
+}
+
+static int apl_hostbridge_probe(struct udevice *dev)
+{
+	if (spl_phase() == PHASE_TPL)
+		return apl_hostbridge_early_init(dev);
+
+	return 0;
+}
+
+static const struct udevice_id apl_hostbridge_ids[] = {
+	{ .compatible = "intel,apl-hostbridge" },
+	{ }
+};
+
+U_BOOT_DRIVER(apl_hostbridge_drv) = {
+	.name		= "intel_apl_hostbridge",
+	.id		= UCLASS_NORTHBRIDGE,
+	.of_match	= apl_hostbridge_ids,
+	.ofdata_to_platdata = apl_hostbridge_ofdata_to_platdata,
+	.probe		= apl_hostbridge_probe,
+	.platdata_auto_alloc_size = sizeof(struct apl_hostbridge_platdata),
+};
diff --git a/arch/x86/cpu/apollolake/itss.c b/arch/x86/cpu/apollolake/itss.c
new file mode 100644
index 0000000..8789f8e
--- /dev/null
+++ b/arch/x86/cpu/apollolake/itss.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Something to do with Interrupts, but I don't know what ITSS stands for
+ *
+ * Copyright (C) 2017 Intel Corporation.
+ * Copyright (C) 2017 Siemens AG
+ * Copyright 2019 Google LLC
+ *
+ * Taken from coreboot itss.c
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <irq.h>
+#include <p2sb.h>
+#include <spl.h>
+#include <asm/arch/itss.h>
+
+struct apl_itss_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	/* Put this first since driver model will copy the data here */
+	struct dtd_intel_apl_itss dtplat;
+#endif
+};
+
+/* struct pmc_route - Routing for PMC to GPIO */
+struct pmc_route {
+	u32 pmc;
+	u32 gpio;
+};
+
+struct apl_itss_priv {
+	struct pmc_route *route;
+	uint route_count;
+	u32 irq_snapshot[NUM_IPC_REGS];
+};
+
+static int apl_set_polarity(struct udevice *dev, uint irq, bool active_low)
+{
+	u32 mask;
+	uint reg;
+
+	if (irq > ITSS_MAX_IRQ)
+		return -EINVAL;
+
+	reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * (irq / IRQS_PER_IPC);
+	mask = 1 << (irq % IRQS_PER_IPC);
+
+	pcr_clrsetbits32(dev, reg, mask, active_low ? mask : 0);
+
+	return 0;
+}
+
+#ifndef CONFIG_TPL_BUILD
+static int apl_snapshot_polarities(struct udevice *dev)
+{
+	struct apl_itss_priv *priv = dev_get_priv(dev);
+	const int start = GPIO_IRQ_START;
+	const int end = GPIO_IRQ_END;
+	int reg_start;
+	int reg_end;
+	int i;
+
+	reg_start = start / IRQS_PER_IPC;
+	reg_end = (end + IRQS_PER_IPC - 1) / IRQS_PER_IPC;
+
+	for (i = reg_start; i < reg_end; i++) {
+		uint reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i;
+
+		priv->irq_snapshot[i] = pcr_read32(dev, reg);
+	}
+
+	return 0;
+}
+
+static void show_polarities(struct udevice *dev, const char *msg)
+{
+	int i;
+
+	log_info("ITSS IRQ Polarities %s:\n", msg);
+	for (i = 0; i < NUM_IPC_REGS; i++) {
+		uint reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i;
+
+		log_info("IPC%d: 0x%08x\n", i, pcr_read32(dev, reg));
+	}
+}
+
+static int apl_restore_polarities(struct udevice *dev)
+{
+	struct apl_itss_priv *priv = dev_get_priv(dev);
+	const int start = GPIO_IRQ_START;
+	const int end = GPIO_IRQ_END;
+	int reg_start;
+	int reg_end;
+	int i;
+
+	show_polarities(dev, "Before");
+
+	reg_start = start / IRQS_PER_IPC;
+	reg_end = (end + IRQS_PER_IPC - 1) / IRQS_PER_IPC;
+
+	for (i = reg_start; i < reg_end; i++) {
+		u32 mask;
+		u16 reg;
+		int irq_start;
+		int irq_end;
+
+		irq_start = i * IRQS_PER_IPC;
+		irq_end = min(irq_start + IRQS_PER_IPC - 1, ITSS_MAX_IRQ);
+
+		if (start > irq_end)
+			continue;
+		if (end < irq_start)
+			break;
+
+		/* Track bits within the bounds of of the register */
+		irq_start = max(start, irq_start) % IRQS_PER_IPC;
+		irq_end = min(end, irq_end) % IRQS_PER_IPC;
+
+		/* Create bitmask of the inclusive range of start and end */
+		mask = (((1U << irq_end) - 1) | (1U << irq_end));
+		mask &= ~((1U << irq_start) - 1);
+
+		reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i;
+		pcr_clrsetbits32(dev, reg, mask, mask & priv->irq_snapshot[i]);
+	}
+
+	show_polarities(dev, "After");
+
+	return 0;
+}
+#endif
+
+static int apl_route_pmc_gpio_gpe(struct udevice *dev, uint pmc_gpe_num)
+{
+	struct apl_itss_priv *priv = dev_get_priv(dev);
+	struct pmc_route *route;
+	int i;
+
+	for (i = 0, route = priv->route; i < priv->route_count; i++, route++) {
+		if (pmc_gpe_num == route->pmc)
+			return route->gpio;
+	}
+
+	return -ENOENT;
+}
+
+static int apl_itss_ofdata_to_platdata(struct udevice *dev)
+{
+	struct apl_itss_priv *priv = dev_get_priv(dev);
+	int ret;
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct apl_itss_platdata *plat = dev_get_platdata(dev);
+	struct dtd_intel_apl_itss *dtplat = &plat->dtplat;
+
+	/*
+	 * It would be nice to do this in the bind() method, but with
+	 * of-platdata binding happens in the order that DM finds things in the
+	 * linker list (i.e. alphabetical order by driver name). So the GPIO
+	 * device may well be bound before its parent (p2sb), and this call
+	 * will fail if p2sb is not bound yet.
+	 *
+	 * TODO(sjg@chromium.org): Add a parent pointer to child devices in dtoc
+	 */
+	ret = p2sb_set_port_id(dev, dtplat->intel_p2sb_port_id);
+	if (ret)
+		return log_msg_ret("Could not set port id", ret);
+	priv->route = (struct pmc_route *)dtplat->intel_pmc_routes;
+	priv->route_count = ARRAY_SIZE(dtplat->intel_pmc_routes) /
+		 sizeof(struct pmc_route);
+#else
+	int size;
+
+	size = dev_read_size(dev, "intel,pmc-routes");
+	if (size < 0)
+		return size;
+	priv->route = malloc(size);
+	if (!priv->route)
+		return -ENOMEM;
+	ret = dev_read_u32_array(dev, "intel,pmc-routes", (u32 *)priv->route,
+				 size / sizeof(fdt32_t));
+	if (ret)
+		return log_msg_ret("Cannot read pmc-routes", ret);
+	priv->route_count = size / sizeof(struct pmc_route);
+#endif
+
+	return 0;
+}
+
+static const struct irq_ops apl_itss_ops = {
+	.route_pmc_gpio_gpe	= apl_route_pmc_gpio_gpe,
+	.set_polarity	= apl_set_polarity,
+#ifndef CONFIG_TPL_BUILD
+	.snapshot_polarities = apl_snapshot_polarities,
+	.restore_polarities = apl_restore_polarities,
+#endif
+};
+
+static const struct udevice_id apl_itss_ids[] = {
+	{ .compatible = "intel,apl-itss"},
+	{ }
+};
+
+U_BOOT_DRIVER(apl_itss_drv) = {
+	.name		= "intel_apl_itss",
+	.id		= UCLASS_IRQ,
+	.of_match	= apl_itss_ids,
+	.ops		= &apl_itss_ops,
+	.ofdata_to_platdata = apl_itss_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct apl_itss_platdata),
+	.priv_auto_alloc_size = sizeof(struct apl_itss_priv),
+};
diff --git a/arch/x86/cpu/apollolake/lpc.c b/arch/x86/cpu/apollolake/lpc.c
new file mode 100644
index 0000000..45b2144
--- /dev/null
+++ b/arch/x86/cpu/apollolake/lpc.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ *
+ * From coreboot Apollo Lake support lpc.c
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <spl.h>
+#include <asm/lpc_common.h>
+#include <asm/pci.h>
+#include <asm/arch/iomap.h>
+#include <asm/arch/lpc.h>
+#include <linux/log2.h>
+
+void lpc_enable_fixed_io_ranges(uint io_enables)
+{
+	pci_x86_clrset_config(PCH_DEV_LPC, LPC_IO_ENABLES, 0, io_enables,
+			      PCI_SIZE_16);
+}
+
+/*
+ * Find the first unused IO window.
+ * Returns -1 if not found, 0 for reg 0x84, 1 for reg 0x88 ...
+ */
+static int find_unused_pmio_window(void)
+{
+	int i;
+	ulong lgir;
+
+	for (i = 0; i < LPC_NUM_GENERIC_IO_RANGES; i++) {
+		pci_x86_read_config(PCH_DEV_LPC, LPC_GENERIC_IO_RANGE(i),
+				    &lgir, PCI_SIZE_32);
+
+		if (!(lgir & LPC_LGIR_EN))
+			return i;
+	}
+
+	return -1;
+}
+
+int lpc_open_pmio_window(uint base, uint size)
+{
+	int i, lgir_reg_num;
+	u32 lgir_reg_offset, lgir, window_size, alignment;
+	ulong bridged_size, bridge_base;
+	ulong reg;
+
+	log_debug("LPC: Trying to open IO window from %x size %x\n", base,
+		  size);
+
+	bridged_size = 0;
+	bridge_base = base;
+
+	while (bridged_size < size) {
+		/* Each IO range register can only open a 256-byte window */
+		window_size = min(size, (uint)LPC_LGIR_MAX_WINDOW_SIZE);
+
+		/* Window size must be a power of two for the AMASK to work */
+		alignment = 1UL << (order_base_2(window_size));
+		window_size = ALIGN(window_size, alignment);
+
+		/* Address[15:2] in LGIR[15:12] and Mask[7:2] in LGIR[23:18] */
+		lgir = (bridge_base & LPC_LGIR_ADDR_MASK) | LPC_LGIR_EN;
+		lgir |= ((window_size - 1) << 16) & LPC_LGIR_AMASK_MASK;
+
+		/* Skip programming if same range already programmed */
+		for (i = 0; i < LPC_NUM_GENERIC_IO_RANGES; i++) {
+			pci_x86_read_config(PCH_DEV_LPC,
+					    LPC_GENERIC_IO_RANGE(i), &reg,
+					    PCI_SIZE_32);
+			if (lgir == reg)
+				return -EALREADY;
+		}
+
+		lgir_reg_num = find_unused_pmio_window();
+		if (lgir_reg_num < 0) {
+			log_err("LPC: Cannot open IO window: %lx size %lx\n",
+				bridge_base, size - bridged_size);
+			log_err("No more IO windows\n");
+
+			return -ENOSPC;
+		}
+		lgir_reg_offset = LPC_GENERIC_IO_RANGE(lgir_reg_num);
+
+		pci_x86_write_config(PCH_DEV_LPC, lgir_reg_offset, lgir,
+				     PCI_SIZE_32);
+
+		log_debug("LPC: Opened IO window LGIR%d: base %lx size %x\n",
+			  lgir_reg_num, bridge_base, window_size);
+
+		bridged_size += window_size;
+		bridge_base += window_size;
+	}
+
+	return 0;
+}
+
+void lpc_io_setup_comm_a_b(void)
+{
+	/* ComA Range 3F8h-3FFh [2:0] */
+	u16 com_ranges = LPC_IOD_COMA_RANGE;
+	u16 com_enable = LPC_IOE_COMA_EN;
+
+	/* Setup I/O Decode Range Register for LPC */
+	pci_write_config16(PCH_DEV_LPC, LPC_IO_DECODE, com_ranges);
+	/* Enable ComA and ComB Port */
+	lpc_enable_fixed_io_ranges(com_enable);
+}
+
+static const struct udevice_id apl_lpc_ids[] = {
+	{ .compatible = "intel,apl-lpc" },
+	{ }
+};
+
+/* All pads are LPC already configured by the hostbridge, so no probing here */
+U_BOOT_DRIVER(apl_lpc_drv) = {
+	.name		= "intel_apl_lpc",
+	.id		= UCLASS_LPC,
+	.of_match	= apl_lpc_ids,
+};
diff --git a/arch/x86/cpu/apollolake/p2sb.c b/arch/x86/cpu/apollolake/p2sb.c
new file mode 100644
index 0000000..eb27861
--- /dev/null
+++ b/arch/x86/cpu/apollolake/p2sb.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Primary-to-Sideband Bridge
+ *
+ * Copyright 2019 Google LLC
+ */
+
+#define LOG_CATEGORY UCLASS_P2SB
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <p2sb.h>
+#include <spl.h>
+#include <asm/pci.h>
+
+struct p2sb_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_intel_apl_p2sb dtplat;
+#endif
+	ulong mmio_base;
+	pci_dev_t bdf;
+};
+
+/* PCI config space registers */
+#define HPTC_OFFSET		0x60
+#define HPTC_ADDR_ENABLE_BIT	BIT(7)
+
+/* High Performance Event Timer Configuration */
+#define P2SB_HPTC				0x60
+#define P2SB_HPTC_ADDRESS_ENABLE		BIT(7)
+
+/*
+ * ADDRESS_SELECT            ENCODING_RANGE
+ *      0                 0xfed0 0000 - 0xfed0 03ff
+ *      1                 0xfed0 1000 - 0xfed0 13ff
+ *      2                 0xfed0 2000 - 0xfed0 23ff
+ *      3                 0xfed0 3000 - 0xfed0 33ff
+ */
+#define P2SB_HPTC_ADDRESS_SELECT_0		(0 << 0)
+#define P2SB_HPTC_ADDRESS_SELECT_1		(1 << 0)
+#define P2SB_HPTC_ADDRESS_SELECT_2		(2 << 0)
+#define P2SB_HPTC_ADDRESS_SELECT_3		(3 << 0)
+
+/*
+ * apl_p2sb_early_init() - Enable decoding for HPET range
+ *
+ * This is needed by FSP-M which uses the High Precision Event Timer.
+ *
+ * @dev: P2SB device
+ * @return 0 if OK, -ve on error
+ */
+static int apl_p2sb_early_init(struct udevice *dev)
+{
+	struct p2sb_platdata *plat = dev_get_platdata(dev);
+	pci_dev_t pdev = plat->bdf;
+
+	/*
+	 * Enable decoding for HPET memory address range.
+	 * HPTC_OFFSET(0x60) bit 7, when set the P2SB will decode
+	 * the High Performance Timer memory address range
+	 * selected by bits 1:0
+	 */
+	pci_x86_write_config(pdev, HPTC_OFFSET, HPTC_ADDR_ENABLE_BIT,
+			     PCI_SIZE_8);
+
+	/* Enable PCR Base address in PCH */
+	pci_x86_write_config(pdev, PCI_BASE_ADDRESS_0, plat->mmio_base,
+			     PCI_SIZE_32);
+	pci_x86_write_config(pdev, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32);
+
+	/* Enable P2SB MSE */
+	pci_x86_write_config(pdev, PCI_COMMAND, PCI_COMMAND_MASTER |
+			     PCI_COMMAND_MEMORY, PCI_SIZE_8);
+
+	return 0;
+}
+
+static int apl_p2sb_spl_init(struct udevice *dev)
+{
+	/* Enable decoding for HPET. Needed for FSP global pointer storage */
+	dm_pci_write_config(dev, P2SB_HPTC, P2SB_HPTC_ADDRESS_SELECT_0 |
+			    P2SB_HPTC_ADDRESS_ENABLE, PCI_SIZE_8);
+
+	return 0;
+}
+
+int apl_p2sb_ofdata_to_platdata(struct udevice *dev)
+{
+	struct p2sb_uc_priv *upriv = dev_get_uclass_priv(dev);
+	struct p2sb_platdata *plat = dev_get_platdata(dev);
+
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	int ret;
+
+	if (spl_phase() == PHASE_TPL) {
+		u32 base[2];
+
+		/* TPL sets up the initial BAR */
+		ret = dev_read_u32_array(dev, "early-regs", base,
+					 ARRAY_SIZE(base));
+		if (ret)
+			return log_msg_ret("Missing/short early-regs", ret);
+		plat->mmio_base = base[0];
+		plat->bdf = pci_get_devfn(dev);
+		if (plat->bdf < 0)
+			return log_msg_ret("Cannot get p2sb PCI address",
+					   plat->bdf);
+	} else {
+		plat->mmio_base = dev_read_addr_pci(dev);
+		/* Don't set BDF since it should not be used */
+		if (!plat->mmio_base || plat->mmio_base == FDT_ADDR_T_NONE)
+			return -EINVAL;
+	}
+#else
+	plat->mmio_base = plat->dtplat.early_regs[0];
+	plat->bdf = pci_ofplat_get_devfn(plat->dtplat.reg[0]);
+#endif
+	upriv->mmio_base = plat->mmio_base;
+	debug("p2sb: mmio_base=%x\n", (uint)plat->mmio_base);
+
+	return 0;
+}
+
+static int apl_p2sb_probe(struct udevice *dev)
+{
+	if (spl_phase() == PHASE_TPL)
+		return apl_p2sb_early_init(dev);
+	else if (spl_phase() == PHASE_SPL)
+		return apl_p2sb_spl_init(dev);
+
+	return 0;
+}
+
+static int p2sb_child_post_bind(struct udevice *dev)
+{
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev);
+	int ret;
+	u32 pid;
+
+	ret = dev_read_u32(dev, "intel,p2sb-port-id", &pid);
+	if (ret)
+		return ret;
+	pplat->pid = pid;
+#endif
+
+	return 0;
+}
+
+static const struct udevice_id apl_p2sb_ids[] = {
+	{ .compatible = "intel,apl-p2sb" },
+	{ }
+};
+
+U_BOOT_DRIVER(apl_p2sb_drv) = {
+	.name		= "intel_apl_p2sb",
+	.id		= UCLASS_P2SB,
+	.of_match	= apl_p2sb_ids,
+	.probe		= apl_p2sb_probe,
+	.ofdata_to_platdata = apl_p2sb_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct p2sb_platdata),
+	.per_child_platdata_auto_alloc_size =
+		sizeof(struct p2sb_child_platdata),
+	.child_post_bind = p2sb_child_post_bind,
+};
diff --git a/arch/x86/cpu/apollolake/pch.c b/arch/x86/cpu/apollolake/pch.c
new file mode 100644
index 0000000..1a5a985
--- /dev/null
+++ b/arch/x86/cpu/apollolake/pch.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <pch.h>
+#include <spl.h>
+#include <asm/lpc_common.h>
+
+#define BIOS_CTRL	0xdc
+
+static int apl_set_spi_protect(struct udevice *dev, bool protect)
+{
+	if (spl_phase() == PHASE_SPL)
+		return lpc_set_spi_protect(dev, BIOS_CTRL, protect);
+
+	return 0;
+}
+
+static const struct pch_ops apl_pch_ops = {
+	.set_spi_protect = apl_set_spi_protect,
+};
+
+static const struct udevice_id apl_pch_ids[] = {
+	{ .compatible = "intel,apl-pch" },
+	{ }
+};
+
+U_BOOT_DRIVER(apl_pch) = {
+	.name		= "apl_pch",
+	.id		= UCLASS_PCH,
+	.of_match	= apl_pch_ids,
+	.ops		= &apl_pch_ops,
+};
diff --git a/arch/x86/cpu/apollolake/pmc.c b/arch/x86/cpu/apollolake/pmc.c
new file mode 100644
index 0000000..683c608
--- /dev/null
+++ b/arch/x86/cpu/apollolake/pmc.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ * Copyright 2019 Google LLC
+ *
+ * Modified from coreboot pmclib.c, pmc.c and pmutil.c
+ */
+
+#define LOG_CATEGORY UCLASS_ACPI_PMC
+
+#include <common.h>
+#include <acpi_s3.h>
+#include <dt-structs.h>
+#include <dm.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <power/acpi_pmc.h>
+
+#define GPIO_GPE_CFG		0x1050
+
+/* Memory mapped IO registers behind PMC_BASE_ADDRESS */
+#define PRSTS			0x1000
+#define GEN_PMCON1		0x1020
+#define  COLD_BOOT_STS		BIT(27)
+#define  COLD_RESET_STS		BIT(26)
+#define  WARM_RESET_STS		BIT(25)
+#define  GLOBAL_RESET_STS	BIT(24)
+#define  SRS			BIT(20)
+#define  MS4V			BIT(18)
+#define  RPS			BIT(2)
+#define GEN_PMCON1_CLR1_BITS	(COLD_BOOT_STS | COLD_RESET_STS | \
+				 WARM_RESET_STS | GLOBAL_RESET_STS | \
+				 SRS | MS4V)
+#define GEN_PMCON2		0x1024
+#define GEN_PMCON3		0x1028
+
+/* Offset of TCO registers from ACPI base I/O address */
+#define TCO_REG_OFFSET		0x60
+#define TCO1_STS	0x64
+#define   DMISCI_STS	BIT(9)
+#define   BOOT_STS	BIT(18)
+#define TCO2_STS	0x66
+#define TCO1_CNT	0x68
+#define   TCO_LOCK	BIT(12)
+#define TCO2_CNT	0x6a
+
+enum {
+	ETR		= 0x1048,
+	CF9_LOCK        = 1UL << 31,
+	CF9_GLB_RST	= 1 << 20,
+};
+
+struct apl_pmc_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_intel_apl_pmc dtplat;
+#endif
+	pci_dev_t bdf;
+};
+
+static int apl_pmc_fill_power_state(struct udevice *dev)
+{
+	struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev);
+
+	upriv->tco1_sts = inw(upriv->acpi_base + TCO1_STS);
+	upriv->tco2_sts = inw(upriv->acpi_base + TCO2_STS);
+
+	upriv->prsts = readl(upriv->pmc_bar0 + PRSTS);
+	upriv->gen_pmcon1 = readl(upriv->pmc_bar0 + GEN_PMCON1);
+	upriv->gen_pmcon2 = readl(upriv->pmc_bar0 + GEN_PMCON2);
+	upriv->gen_pmcon3 = readl(upriv->pmc_bar0 + GEN_PMCON3);
+
+	return 0;
+}
+
+static int apl_prev_sleep_state(struct udevice *dev, int prev_sleep_state)
+{
+	struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev);
+
+	/* WAK_STS bit will not be set when waking from G3 state */
+	if (!(upriv->pm1_sts & WAK_STS) &&
+	    (upriv->gen_pmcon1 & COLD_BOOT_STS))
+		prev_sleep_state = ACPI_S5;
+
+	return prev_sleep_state;
+}
+
+static int apl_disable_tco(struct udevice *dev)
+{
+	struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev);
+
+	pmc_disable_tco_base(upriv->acpi_base + TCO_REG_OFFSET);
+
+	return 0;
+}
+
+static int apl_global_reset_set_enable(struct udevice *dev, bool enable)
+{
+	struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev);
+
+	if (enable)
+		setbits_le32(upriv->pmc_bar0 + ETR, CF9_GLB_RST);
+	else
+		clrbits_le32(upriv->pmc_bar0 + ETR, CF9_GLB_RST);
+
+	return 0;
+}
+
+int apl_pmc_ofdata_to_uc_platdata(struct udevice *dev)
+{
+	struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev);
+	struct apl_pmc_platdata *plat = dev_get_platdata(dev);
+
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	u32 base[6];
+	int size;
+	int ret;
+
+	ret = dev_read_u32_array(dev, "early-regs", base, ARRAY_SIZE(base));
+	if (ret)
+		return log_msg_ret("Missing/short early-regs", ret);
+	upriv->pmc_bar0 = (void *)base[0];
+	upriv->pmc_bar2 = (void *)base[2];
+	upriv->acpi_base = base[4];
+
+	/* Since PCI is not enabled, we must get the BDF manually */
+	plat->bdf = pci_get_devfn(dev);
+	if (plat->bdf < 0)
+		return log_msg_ret("Cannot get PMC PCI address", plat->bdf);
+
+	/* Get the dwX values for pmc gpe settings */
+	size = dev_read_size(dev, "gpe0-dw");
+	if (size < 0)
+		return log_msg_ret("Cannot read gpe0-dm", size);
+	upriv->gpe0_count = size / sizeof(u32);
+	ret = dev_read_u32_array(dev, "gpe0-dw", upriv->gpe0_dw,
+				 upriv->gpe0_count);
+	if (ret)
+		return log_msg_ret("Bad gpe0-dw", ret);
+
+	return pmc_ofdata_to_uc_platdata(dev);
+#else
+	struct dtd_intel_apl_pmc *dtplat = &plat->dtplat;
+
+	plat->bdf = pci_ofplat_get_devfn(dtplat->reg[0]);
+	upriv->pmc_bar0 = (void *)dtplat->early_regs[0];
+	upriv->pmc_bar2 = (void *)dtplat->early_regs[2];
+	upriv->acpi_base = dtplat->early_regs[4];
+	upriv->gpe0_dwx_mask = dtplat->gpe0_dwx_mask;
+	upriv->gpe0_dwx_shift_base = dtplat->gpe0_dwx_shift_base;
+	upriv->gpe0_sts_reg = dtplat->gpe0_sts;
+	upriv->gpe0_sts_reg += upriv->acpi_base;
+	upriv->gpe0_en_reg = dtplat->gpe0_en;
+	upriv->gpe0_en_reg += upriv->acpi_base;
+	upriv->gpe0_count = min((int)ARRAY_SIZE(dtplat->gpe0_dw), GPE0_REG_MAX);
+	memcpy(upriv->gpe0_dw, dtplat->gpe0_dw, sizeof(dtplat->gpe0_dw));
+#endif
+	upriv->gpe_cfg = (u32 *)(upriv->pmc_bar0 + GPIO_GPE_CFG);
+
+	return 0;
+}
+
+static int enable_pmcbar(struct udevice *dev)
+{
+	struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev);
+	struct apl_pmc_platdata *priv = dev_get_platdata(dev);
+	pci_dev_t pmc = priv->bdf;
+
+	/*
+	 * Set PMC base addresses and enable decoding. BARs 1 and 3 are 64-bit
+	 * BARs.
+	 */
+	pci_x86_write_config(pmc, PCI_BASE_ADDRESS_0, (ulong)upriv->pmc_bar0,
+			     PCI_SIZE_32);
+	pci_x86_write_config(pmc, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32);
+	pci_x86_write_config(pmc, PCI_BASE_ADDRESS_2, (ulong)upriv->pmc_bar2,
+			     PCI_SIZE_32);
+	pci_x86_write_config(pmc, PCI_BASE_ADDRESS_3, 0, PCI_SIZE_32);
+	pci_x86_write_config(pmc, PCI_BASE_ADDRESS_4, upriv->acpi_base,
+			     PCI_SIZE_16);
+	pci_x86_write_config(pmc, PCI_COMMAND, PCI_COMMAND_IO |
+			     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER,
+			     PCI_SIZE_16);
+
+	return 0;
+}
+
+static int apl_pmc_probe(struct udevice *dev)
+{
+	if (spl_phase() == PHASE_TPL)
+		return enable_pmcbar(dev);
+
+	return 0;
+}
+
+static struct acpi_pmc_ops apl_pmc_ops = {
+	.init			= apl_pmc_fill_power_state,
+	.prev_sleep_state	= apl_prev_sleep_state,
+	.disable_tco		= apl_disable_tco,
+	.global_reset_set_enable = apl_global_reset_set_enable,
+};
+
+static const struct udevice_id apl_pmc_ids[] = {
+	{ .compatible = "intel,apl-pmc" },
+	{ }
+};
+
+U_BOOT_DRIVER(apl_pmc) = {
+	.name		= "intel_apl_pmc",
+	.id		= UCLASS_ACPI_PMC,
+	.of_match	= apl_pmc_ids,
+	.ofdata_to_platdata = apl_pmc_ofdata_to_uc_platdata,
+	.probe		= apl_pmc_probe,
+	.ops		= &apl_pmc_ops,
+	.platdata_auto_alloc_size = sizeof(struct apl_pmc_platdata),
+};
diff --git a/arch/x86/cpu/apollolake/punit.c b/arch/x86/cpu/apollolake/punit.c
new file mode 100644
index 0000000..1a131fb
--- /dev/null
+++ b/arch/x86/cpu/apollolake/punit.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <spl.h>
+#include <asm/cpu.h>
+#include <asm/cpu_common.h>
+#include <asm/intel_regs.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/arch/systemagent.h>
+
+/*
+ * Punit Initialisation code. This all isn't documented, but
+ * this is the recipe.
+ */
+static int punit_init(struct udevice *dev)
+{
+	struct udevice *cpu;
+	u32 reg;
+	ulong start;
+	int ret;
+
+	/* Thermal throttle activation offset */
+	ret = uclass_first_device_err(UCLASS_CPU, &cpu);
+	if (ret)
+		return log_msg_ret("Cannot find CPU", ret);
+	cpu_configure_thermal_target(cpu);
+
+	/*
+	 * Software Core Disable Mask (P_CR_CORE_DISABLE_MASK_0_0_0_MCHBAR).
+	 * Enable all cores here.
+	 */
+	writel(0, MCHBAR_REG(CORE_DISABLE_MASK));
+
+	/* P-Unit bring up */
+	reg = readl(MCHBAR_REG(BIOS_RESET_CPL));
+	if (reg == 0xffffffff) {
+		/* P-unit not found */
+		debug("Punit MMIO not available\n");
+		return -ENOENT;
+	}
+
+	/* Set Punit interrupt pin IPIN offset 3D */
+	dm_pci_write_config8(dev, PCI_INTERRUPT_PIN, 0x2);
+
+	/* Set PUINT IRQ to 24 and INTPIN LOCK */
+	writel(PUINT_THERMAL_DEVICE_IRQ_VEC_NUMBER |
+	       PUINT_THERMAL_DEVICE_IRQ_LOCK,
+	       MCHBAR_REG(PUNIT_THERMAL_DEVICE_IRQ));
+
+	/* Stage0 BIOS Reset Complete (RST_CPL) */
+	enable_bios_reset_cpl();
+
+	/*
+	 * Poll for bit 8 to check if PCODE has completed its action in response
+	 * to BIOS Reset complete.  We wait here till 1 ms for the bit to get
+	 * set.
+	 */
+	start = get_timer(0);
+	while (!(readl(MCHBAR_REG(BIOS_RESET_CPL)) & PCODE_INIT_DONE)) {
+		if (get_timer(start) > 1) {
+			debug("PCODE Init Done timeout\n");
+			return -ETIMEDOUT;
+		}
+		udelay(100);
+	}
+	debug("PUNIT init complete\n");
+
+	return 0;
+}
+
+static int apl_punit_probe(struct udevice *dev)
+{
+	if (spl_phase() == PHASE_SPL)
+		return punit_init(dev);
+
+	return 0;
+}
+
+static const struct udevice_id apl_syscon_ids[] = {
+	{ .compatible = "intel,apl-punit", .data = X86_SYSCON_PUNIT },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_intel_punit) = {
+	.name		= "intel_punit_syscon",
+	.id		= UCLASS_SYSCON,
+	.of_match	= apl_syscon_ids,
+	.probe		= apl_punit_probe,
+};
diff --git a/arch/x86/cpu/apollolake/spl.c b/arch/x86/cpu/apollolake/spl.c
new file mode 100644
index 0000000..7ab7243
--- /dev/null
+++ b/arch/x86/cpu/apollolake/spl.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <binman_sym.h>
+#include <dm.h>
+#include <spi.h>
+#include <spl.h>
+#include <spi_flash.h>
+#include <asm/fast_spi.h>
+#include <asm/spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/iomap.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+
+/* This reads the next phase from mapped SPI flash */
+static int rom_load_image(struct spl_image_info *spl_image,
+			  struct spl_boot_device *bootdev)
+{
+	ulong spl_pos = spl_get_image_pos();
+	ulong spl_size = spl_get_image_size();
+	struct udevice *dev;
+	ulong map_base;
+	size_t map_size;
+	uint offset;
+	int ret;
+
+	spl_image->size = CONFIG_SYS_MONITOR_LEN;  /* We don't know SPL size */
+	spl_image->entry_point = spl_phase() == PHASE_TPL ?
+		CONFIG_SPL_TEXT_BASE : CONFIG_SYS_TEXT_BASE;
+	spl_image->load_addr = spl_image->entry_point;
+	spl_image->os = IH_OS_U_BOOT;
+	spl_image->name = "U-Boot";
+	debug("Reading from mapped SPI %lx, size %lx", spl_pos, spl_size);
+
+	if (CONFIG_IS_ENABLED(SPI_FLASH_SUPPORT)) {
+		ret = uclass_find_first_device(UCLASS_SPI_FLASH, &dev);
+		if (ret)
+			return log_msg_ret("spi_flash", ret);
+		if (!dev)
+			return log_msg_ret("spi_flash dev", -ENODEV);
+		ret = dm_spi_get_mmap(dev, &map_base, &map_size, &offset);
+		if (ret)
+			return log_msg_ret("mmap", ret);
+	} else {
+		ret = fast_spi_get_bios_mmap(PCH_DEV_SPI, &map_base, &map_size,
+					     &offset);
+		if (ret)
+			return ret;
+	}
+	spl_pos += map_base & ~0xff000000;
+	debug(", base %lx, pos %lx\n", map_base, spl_pos);
+	bootstage_start(BOOTSTAGE_ID_ACCUM_MMAP_SPI, "mmap_spi");
+	memcpy((void *)spl_image->load_addr, (void *)spl_pos, spl_size);
+	cpu_flush_l1d_to_l2();
+	bootstage_accum(BOOTSTAGE_ID_ACCUM_MMAP_SPI);
+
+	return 0;
+}
+SPL_LOAD_IMAGE_METHOD("Mapped SPI", 2, BOOT_DEVICE_SPI_MMAP, rom_load_image);
+
+#if CONFIG_IS_ENABLED(SPI_FLASH_SUPPORT)
+
+static int apl_flash_std_read(struct udevice *dev, u32 offset, size_t len,
+			      void *buf)
+{
+	struct spi_flash *flash = dev_get_uclass_priv(dev);
+	struct mtd_info *mtd = &flash->mtd;
+	size_t retlen;
+
+	return log_ret(mtd->_read(mtd, offset, len, &retlen, buf));
+}
+
+static int apl_flash_probe(struct udevice *dev)
+{
+	return spi_flash_std_probe(dev);
+}
+
+/*
+ * Manually set the parent of the SPI flash to SPI, since dtoc doesn't. We also
+ * need to allocate the parent_platdata since by the time this function is
+ * called device_bind() has already gone past that step.
+ */
+static int apl_flash_bind(struct udevice *dev)
+{
+	if (CONFIG_IS_ENABLED(OF_PLATDATA)) {
+		struct dm_spi_slave_platdata *plat;
+		struct udevice *spi;
+		int ret;
+
+		ret = uclass_first_device_err(UCLASS_SPI, &spi);
+		if (ret)
+			return ret;
+		dev->parent = spi;
+
+		plat = calloc(sizeof(*plat), 1);
+		if (!plat)
+			return -ENOMEM;
+		dev->parent_platdata = plat;
+	}
+
+	return 0;
+}
+
+static const struct dm_spi_flash_ops apl_flash_ops = {
+	.read		= apl_flash_std_read,
+};
+
+static const struct udevice_id apl_flash_ids[] = {
+	{ .compatible = "jedec,spi-nor" },
+	{ }
+};
+
+U_BOOT_DRIVER(winbond_w25q128fw) = {
+	.name		= "winbond_w25q128fw",
+	.id		= UCLASS_SPI_FLASH,
+	.of_match	= apl_flash_ids,
+	.bind		= apl_flash_bind,
+	.probe		= apl_flash_probe,
+	.priv_auto_alloc_size = sizeof(struct spi_flash),
+	.ops		= &apl_flash_ops,
+};
+
+/* This uses a SPI flash device to read the next phase */
+static int spl_fast_spi_load_image(struct spl_image_info *spl_image,
+				   struct spl_boot_device *bootdev)
+{
+	ulong spl_pos = spl_get_image_pos();
+	ulong spl_size = spl_get_image_size();
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_SPI_FLASH, &dev);
+	if (ret)
+		return ret;
+
+	spl_image->size = CONFIG_SYS_MONITOR_LEN;  /* We don't know SPL size */
+	spl_image->entry_point = spl_phase() == PHASE_TPL ?
+		CONFIG_SPL_TEXT_BASE : CONFIG_SYS_TEXT_BASE;
+	spl_image->load_addr = spl_image->entry_point;
+	spl_image->os = IH_OS_U_BOOT;
+	spl_image->name = "U-Boot";
+	spl_pos &= ~0xff000000;
+	debug("Reading from flash %lx, size %lx\n", spl_pos, spl_size);
+	ret = spi_flash_read_dm(dev, spl_pos, spl_size,
+				(void *)spl_image->load_addr);
+	cpu_flush_l1d_to_l2();
+	if (ret)
+		return ret;
+
+	return 0;
+}
+SPL_LOAD_IMAGE_METHOD("Fast SPI", 1, BOOT_DEVICE_FAST_SPI,
+		      spl_fast_spi_load_image);
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	bool use_spi_flash = IS_ENABLED(CONFIG_APL_BOOT_FROM_FAST_SPI_FLASH);
+
+	if (use_spi_flash) {
+		spl_boot_list[0] = BOOT_DEVICE_FAST_SPI;
+		spl_boot_list[1] = BOOT_DEVICE_SPI_MMAP;
+	} else {
+		spl_boot_list[0] = BOOT_DEVICE_SPI_MMAP;
+		spl_boot_list[1] = BOOT_DEVICE_FAST_SPI;
+	}
+}
+
+#else
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	spl_boot_list[0] = BOOT_DEVICE_SPI_MMAP;
+}
+#endif
diff --git a/arch/x86/cpu/apollolake/systemagent.c b/arch/x86/cpu/apollolake/systemagent.c
new file mode 100644
index 0000000..b6bc2ba
--- /dev/null
+++ b/arch/x86/cpu/apollolake/systemagent.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ * Take from coreboot project file of the same name
+ */
+
+#include <common.h>
+#include <asm/intel_regs.h>
+#include <asm/io.h>
+#include <asm/arch/systemagent.h>
+
+void enable_bios_reset_cpl(void)
+{
+	/*
+	 * Set bits 0+1 of BIOS_RESET_CPL to indicate to the CPU
+	 * that BIOS has initialised memory and power management
+	 *
+	 * The FSP-S does not do this. If we leave this as zero then I believe
+	 * the power-aware interrupts don't work in Linux, and CPU 0 always gets
+	 * the interrupt.
+	 */
+	setbits_8(MCHBAR_REG(BIOS_RESET_CPL), 3);
+}
diff --git a/arch/x86/cpu/apollolake/uart.c b/arch/x86/cpu/apollolake/uart.c
new file mode 100644
index 0000000..f2b356e
--- /dev/null
+++ b/arch/x86/cpu/apollolake/uart.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Special driver to handle of-platdata
+ *
+ * Copyright 2019 Google LLC
+ *
+ * Some code from coreboot lpss.c
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <ns16550.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/lpss.h>
+
+/* Low-power Subsystem (LPSS) clock register */
+enum {
+	LPSS_CLOCK_CTL_REG	= 0x200,
+	LPSS_CNT_CLOCK_EN	= 1,
+	LPSS_CNT_CLK_UPDATE	= 1U << 31,
+	LPSS_CLOCK_DIV_N_SHIFT	= 16,
+	LPSS_CLOCK_DIV_N_MASK	= 0x7fff << LPSS_CLOCK_DIV_N_SHIFT,
+	LPSS_CLOCK_DIV_M_SHIFT	= 1,
+	LPSS_CLOCK_DIV_M_MASK	= 0x7fff << LPSS_CLOCK_DIV_M_SHIFT,
+
+	/* These set the UART input clock speed */
+	LPSS_UART_CLK_M_VAL	= 0x25a,
+	LPSS_UART_CLK_N_VAL	= 0x7fff,
+};
+
+static void lpss_clk_update(void *regs, u32 clk_m_val, u32 clk_n_val)
+{
+	u32 clk_sel;
+
+	clk_sel = clk_n_val << LPSS_CLOCK_DIV_N_SHIFT |
+		 clk_m_val << LPSS_CLOCK_DIV_M_SHIFT;
+	clk_sel |= LPSS_CNT_CLK_UPDATE | LPSS_CNT_CLOCK_EN;
+
+	writel(clk_sel, regs + LPSS_CLOCK_CTL_REG);
+}
+
+static void uart_lpss_init(void *regs)
+{
+	/* Take UART out of reset */
+	lpss_reset_release(regs);
+
+	/* Set M and N divisor inputs and enable clock */
+	lpss_clk_update(regs, LPSS_UART_CLK_M_VAL, LPSS_UART_CLK_N_VAL);
+}
+
+void apl_uart_init(pci_dev_t bdf, ulong base)
+{
+	/* Set UART base address */
+	pci_x86_write_config(bdf, PCI_BASE_ADDRESS_0, base, PCI_SIZE_32);
+
+	/* Enable memory access and bus master */
+	pci_x86_write_config(bdf, PCI_COMMAND, PCI_COMMAND_MEMORY |
+			     PCI_COMMAND_MASTER, PCI_SIZE_32);
+
+	uart_lpss_init((void *)base);
+}
+
+/*
+ * This driver uses its own compatible string but almost everything else from
+ * the standard ns16550 driver. This allows us to provide an of-platdata
+ * implementation, since the platdata produced by of-platdata does not match
+ * struct ns16550_platdata.
+ *
+ * When running with of-platdata (generally TPL), the platdata is converted to
+ * something that ns16550 expects. When running withoutof-platdata (SPL, U-Boot
+ * proper), we use ns16550's ofdata_to_platdata routine.
+ */
+
+static int apl_ns16550_probe(struct udevice *dev)
+{
+	struct ns16550_platdata *plat = dev_get_platdata(dev);
+
+	if (!CONFIG_IS_ENABLED(PCI))
+		apl_uart_init(plat->bdf, plat->base);
+
+	return ns16550_serial_probe(dev);
+}
+
+static int apl_ns16550_ofdata_to_platdata(struct udevice *dev)
+{
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_intel_apl_ns16550 *dtplat = dev_get_platdata(dev);
+	struct ns16550_platdata *plat;
+
+	/*
+	 * Convert our platdata to the ns16550's platdata, so we can just use
+	 * that driver
+	 */
+	plat = malloc(sizeof(*plat));
+	if (!plat)
+		return -ENOMEM;
+	plat->base = dtplat->early_regs[0];
+	plat->reg_width = 1;
+	plat->reg_shift = dtplat->reg_shift;
+	plat->reg_offset = 0;
+	plat->clock = dtplat->clock_frequency;
+	plat->fcr = UART_FCR_DEFVAL;
+	plat->bdf = pci_ofplat_get_devfn(dtplat->reg[0]);
+	dev->platdata = plat;
+#else
+	int ret;
+
+	ret = ns16550_serial_ofdata_to_platdata(dev);
+	if (ret)
+		return ret;
+#endif /* OF_PLATDATA */
+
+	return 0;
+}
+
+static const struct udevice_id apl_ns16550_serial_ids[] = {
+	{ .compatible = "intel,apl-ns16550" },
+	{ },
+};
+
+U_BOOT_DRIVER(apl_ns16550) = {
+	.name	= "intel_apl_ns16550",
+	.id	= UCLASS_SERIAL,
+	.of_match = apl_ns16550_serial_ids,
+	.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
+	.priv_auto_alloc_size = sizeof(struct NS16550),
+	.ops	= &ns16550_serial_ops,
+	.ofdata_to_platdata = apl_ns16550_ofdata_to_platdata,
+	.probe = apl_ns16550_probe,
+};
diff --git a/arch/x86/cpu/broadwell/sdram.c b/arch/x86/cpu/broadwell/sdram.c
index dfd8afc..15bfc58 100644
--- a/arch/x86/cpu/broadwell/sdram.c
+++ b/arch/x86/cpu/broadwell/sdram.c
@@ -83,7 +83,7 @@ static int prepare_mrc_cache(struct pei_data *pei_data)
 	struct mrc_region entry;
 	int ret;
 
-	ret = mrccache_get_region(NULL, &entry);
+	ret = mrccache_get_region(MRC_TYPE_NORMAL, NULL, &entry);
 	if (ret)
 		return ret;
 	mrc_cache = mrccache_find_current(&entry);
@@ -169,12 +169,14 @@ int dram_init(void)
 	      pei_data->data_to_save);
 	/* S3 resume: don't save scrambler seed or MRC data */
 	if (pei_data->boot_mode != SLEEP_STATE_S3) {
+		struct mrc_output *mrc = &gd->arch.mrc[MRC_TYPE_NORMAL];
+
 		/*
 		 * This will be copied to SDRAM in reserve_arch(), then written
 		 * to SPI flash in mrccache_save()
 		 */
-		gd->arch.mrc_output = (char *)pei_data->data_to_save;
-		gd->arch.mrc_output_len = pei_data->data_to_save_size;
+		mrc->buf = (char *)pei_data->data_to_save;
+		mrc->len = pei_data->data_to_save_size;
 	}
 	gd->arch.pei_meminfo = pei_data->meminfo;
 
diff --git a/arch/x86/cpu/coreboot/Kconfig b/arch/x86/cpu/coreboot/Kconfig
index 93f61f2..c8e6a88 100644
--- a/arch/x86/cpu/coreboot/Kconfig
+++ b/arch/x86/cpu/coreboot/Kconfig
@@ -24,5 +24,6 @@ config SYS_COREBOOT
 	imply CMD_CBFS
 	imply FS_CBFS
 	imply CBMEM_CONSOLE
+	imply X86_TSC_READ_BASE
 
 endif
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index 4e59476..d626e38 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -46,6 +46,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifndef CONFIG_TPL_BUILD
 static const char *const x86_vendor_name[] = {
 	[X86_VENDOR_INTEL]     = "Intel",
 	[X86_VENDOR_CYRIX]     = "Cyrix",
@@ -58,6 +59,7 @@ static const char *const x86_vendor_name[] = {
 	[X86_VENDOR_NSC]       = "NSC",
 	[X86_VENDOR_SIS]       = "SiS",
 };
+#endif
 
 int __weak x86_cleanup_before_linux(void)
 {
@@ -114,6 +116,7 @@ int icache_status(void)
 	return 1;
 }
 
+#ifndef CONFIG_TPL_BUILD
 const char *cpu_vendor_name(int vendor)
 {
 	const char *name;
@@ -124,6 +127,7 @@ const char *cpu_vendor_name(int vendor)
 
 	return name;
 }
+#endif
 
 char *cpu_get_name(char *name)
 {
diff --git a/arch/x86/cpu/i386/Makefile b/arch/x86/cpu/i386/Makefile
index 0c47252..18e15207 100644
--- a/arch/x86/cpu/i386/Makefile
+++ b/arch/x86/cpu/i386/Makefile
@@ -5,5 +5,7 @@
 
 obj-y += call64.o
 obj-y += cpu.o
+ifndef CONFIG_TPL_BUILD
 obj-y += interrupt.o
+endif
 obj-y += setjmp.o
diff --git a/arch/x86/cpu/i386/cpu.c b/arch/x86/cpu/i386/cpu.c
index c66382b..2b27617 100644
--- a/arch/x86/cpu/i386/cpu.c
+++ b/arch/x86/cpu/i386/cpu.c
@@ -21,6 +21,7 @@
 #include <common.h>
 #include <cpu_func.h>
 #include <malloc.h>
+#include <spl.h>
 #include <asm/control_regs.h>
 #include <asm/cpu.h>
 #include <asm/mp.h>
@@ -58,6 +59,8 @@ struct cpuinfo_x86 {
 	uint8_t x86_mask;
 };
 
+/* gcc 7.3 does not wwant to drop x86_vendors, so use #ifdef */
+#ifndef CONFIG_TPL_BUILD
 /*
  * List of cpu vendor strings along with their normalized
  * id values.
@@ -78,6 +81,7 @@ static const struct {
 	{ X86_VENDOR_NSC,       "Geode by NSC", },
 	{ X86_VENDOR_SIS,       "SiS SiS SiS ", },
 };
+#endif
 
 static void load_ds(u32 segment)
 {
@@ -199,6 +203,7 @@ static inline int test_cyrix_52div(void)
 	return (unsigned char) (test >> 8) == 0x02;
 }
 
+#ifndef CONFIG_TPL_BUILD
 /*
  *	Detect a NexGen CPU running without BIOS hypercode new enough
  *	to have CPUID. (Thanks to Herbert Oppmann)
@@ -219,6 +224,7 @@ static int deep_magic_nexgen_probe(void)
 		: "=a" (ret) : : "cx", "dx");
 	return  ret;
 }
+#endif
 
 static bool has_cpuid(void)
 {
@@ -230,6 +236,7 @@ static bool has_mtrr(void)
 	return cpuid_edx(0x00000001) & (1 << 12) ? true : false;
 }
 
+#ifndef CONFIG_TPL_BUILD
 static int build_vendor_name(char *vendor_name)
 {
 	struct cpuid_result result;
@@ -242,14 +249,40 @@ static int build_vendor_name(char *vendor_name)
 
 	return result.eax;
 }
+#endif
 
 static void identify_cpu(struct cpu_device_id *cpu)
 {
+	cpu->device = 0; /* fix gcc 4.4.4 warning */
+
+	/*
+	 * Do a quick and dirty check to save space - Intel and AMD only and
+	 * just the vendor. This is enough for most TPL code.
+	 */
+	if (spl_phase() == PHASE_TPL) {
+		struct cpuid_result result;
+
+		result = cpuid(0x00000000);
+		switch (result.ecx >> 24) {
+		case 'l': /* GenuineIntel */
+			cpu->vendor = X86_VENDOR_INTEL;
+			break;
+		case 'D': /* AuthenticAMD */
+			cpu->vendor = X86_VENDOR_AMD;
+			break;
+		default:
+			cpu->vendor = X86_VENDOR_ANY;
+			break;
+		}
+		return;
+	}
+
+/* gcc 7.3 does not want to drop x86_vendors, so use #ifdef */
+#ifndef CONFIG_TPL_BUILD
 	char vendor_name[16];
 	int i;
 
 	vendor_name[0] = '\0'; /* Unset */
-	cpu->device = 0; /* fix gcc 4.4.4 warning */
 
 	/* Find the id and vendor_name */
 	if (!has_cpuid()) {
@@ -265,9 +298,8 @@ static void identify_cpu(struct cpu_device_id *cpu)
 		/* Detect NexGen with old hypercode */
 		else if (deep_magic_nexgen_probe())
 			memcpy(vendor_name, "NexGenDriven", 13);
-	}
-	if (has_cpuid()) {
-		int  cpuid_level;
+	} else {
+		int cpuid_level;
 
 		cpuid_level = build_vendor_name(vendor_name);
 		vendor_name[12] = '\0';
@@ -287,6 +319,7 @@ static void identify_cpu(struct cpu_device_id *cpu)
 			break;
 		}
 	}
+#endif
 }
 
 static inline void get_fms(struct cpuinfo_x86 *c, uint32_t tfms)
diff --git a/arch/x86/cpu/intel_common/Makefile b/arch/x86/cpu/intel_common/Makefile
index 07f27c2..cc4e1c9 100644
--- a/arch/x86/cpu/intel_common/Makefile
+++ b/arch/x86/cpu/intel_common/Makefile
@@ -8,8 +8,18 @@ obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += me_status.o
 obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += report_platform.o
 obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += mrc.o
 endif
+
+ifdef CONFIG_INTEL_CAR_CQOS
+obj-$(CONFIG_TPL_BUILD) += car2.o
+ifndef CONFIG_SPL_BUILD
+obj-y += car2_uninit.o
+endif
+endif
+
 obj-y += cpu.o
+obj-y += fast_spi.o
 obj-y += lpc.o
+obj-y += lpss.o
 ifndef CONFIG_TARGET_EFI_APP
 obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += microcode.o
 ifndef CONFIG_$(SPL_)X86_64
diff --git a/arch/x86/cpu/intel_common/car2.S b/arch/x86/cpu/intel_common/car2.S
new file mode 100644
index 0000000..086f987
--- /dev/null
+++ b/arch/x86/cpu/intel_common/car2.S
@@ -0,0 +1,448 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file was modified from the coreboot version.
+ *
+ * Copyright (C) 2015-2016 Intel Corp.
+ */
+
+#include <config.h>
+#include <asm/msr-index.h>
+#include <asm/mtrr.h>
+#include <asm/post.h>
+#include <asm/processor.h>
+#include <asm/processor-flags.h>
+
+#define KiB 1024
+
+#define IS_POWER_OF_2(x)	(!((x) & ((x) - 1)))
+
+.global car_init
+car_init:
+	post_code(POST_CAR_START)
+
+	/*
+	 * Use the MTRR default type MSR as a proxy for detecting INIT#.
+	 * Reset the system if any known bits are set in that MSR. That is
+	 * an indication of the CPU not being properly reset.
+	 */
+check_for_clean_reset:
+	mov	$MTRR_DEF_TYPE_MSR, %ecx
+	rdmsr
+	and	$(MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN), %eax
+	cmp	$0, %eax
+	jz	no_reset
+	/* perform warm reset */
+	movw	$IO_PORT_RESET, %dx
+	movb	$(SYS_RST | RST_CPU), %al
+	outb	%al, %dx
+
+no_reset:
+	post_code(POST_CAR_SIPI)
+
+	/* Clear/disable fixed MTRRs */
+	mov	$fixed_mtrr_list_size, %ebx
+	xor	%eax, %eax
+	xor	%edx, %edx
+
+clear_fixed_mtrr:
+	add	$-2, %ebx
+	movzwl	fixed_mtrr_list(%ebx), %ecx
+	wrmsr
+	jnz	clear_fixed_mtrr
+
+	post_code(POST_CAR_MTRR)
+
+	/* Figure put how many MTRRs we have, and clear them out */
+	mov	$MTRR_CAP_MSR, %ecx
+	rdmsr
+	movzb	%al, %ebx		/* Number of variable MTRRs */
+	mov	$MTRR_PHYS_BASE_MSR(0), %ecx
+	xor	%eax, %eax
+	xor	%edx, %edx
+
+clear_var_mtrr:
+	wrmsr
+	inc	%ecx
+	wrmsr
+	inc	%ecx
+	dec	%ebx
+	jnz	clear_var_mtrr
+
+	post_code(POST_CAR_UNCACHEABLE)
+
+	/* Configure default memory type to uncacheable (UC) */
+	mov	$MTRR_DEF_TYPE_MSR, %ecx
+	rdmsr
+	/* Clear enable bits and set default type to UC */
+	and	$~(MTRR_DEF_TYPE_MASK | MTRR_DEF_TYPE_EN | \
+		 MTRR_DEF_TYPE_FIX_EN), %eax
+	wrmsr
+
+	/*
+	 * Configure MTRR_PHYS_MASK_HIGH for proper addressing above 4GB
+	 * based on the physical address size supported for this processor
+	 * This is based on read from CPUID EAX = 080000008h, EAX bits [7:0]
+	 *
+	 * Examples:
+	 *  MTRR_PHYS_MASK_HIGH = 00000000Fh  For 36 bit addressing
+	 *  MTRR_PHYS_MASK_HIGH = 0000000FFh  For 40 bit addressing
+	 */
+
+	movl	$0x80000008, %eax 	/* Address sizes leaf */
+	cpuid
+	sub	$32, %al
+	movzx	%al, %eax
+	xorl	%esi, %esi
+	bts	%eax, %esi
+	dec	%esi			/* esi <- MTRR_PHYS_MASK_HIGH */
+
+	post_code(POST_CAR_BASE_ADDRESS)
+
+#if IS_POWER_OF_2(CONFIG_DCACHE_RAM_SIZE)
+	/* Configure CAR region as write-back (WB) */
+	mov	$MTRR_PHYS_BASE_MSR(0), %ecx
+	mov	$CONFIG_DCACHE_RAM_BASE, %eax
+	or	$MTRR_TYPE_WRBACK, %eax
+	xor	%edx,%edx
+	wrmsr
+
+	/* Configure the MTRR mask for the size region */
+	mov	$MTRR_PHYS_MASK(0), %ecx
+	mov	$CONFIG_DCACHE_RAM_SIZE, %eax	/* size mask */
+	dec	%eax
+	not	%eax
+	or	$MTRR_PHYS_MASK_VALID, %eax
+	movl	%esi, %edx	/* edx <- MTRR_PHYS_MASK_HIGH */
+	wrmsr
+#elif (CONFIG_DCACHE_RAM_SIZE == 768 * KiB) /* 768 KiB */
+	/* Configure CAR region as write-back (WB) */
+	mov	$MTRR_PHYS_BASE_MSR(0), %ecx
+	mov	$CONFIG_DCACHE_RAM_BASE, %eax
+	or	$MTRR_TYPE_WRBACK, %eax
+	xor	%edx,%edx
+	wrmsr
+
+	mov	$MTRR_PHYS_MASK_MSR(0), %ecx
+	mov	$(512 * KiB), %eax	/* size mask */
+	dec	%eax
+	not	%eax
+	or	$MTRR_PHYS_MASK_VALID, %eax
+	movl	%esi, %edx	/* edx <- MTRR_PHYS_MASK_HIGH */
+	wrmsr
+
+	mov	$MTRR_PHYS_BASE_MSR(1), %ecx
+	mov	$(CONFIG_DCACHE_RAM_BASE + 512 * KiB), %eax
+	or	$MTRR_TYPE_WRBACK, %eax
+	xor	%edx,%edx
+	wrmsr
+
+	mov	$MTRR_PHYS_MASK_MSR(1), %ecx
+	mov	$(256 * KiB), %eax	/* size mask */
+	dec	%eax
+	not	%eax
+	or	$MTRR_PHYS_MASK_VALID, %eax
+	movl	%esi, %edx	/* edx <- MTRR_PHYS_MASK_HIGH */
+	wrmsr
+#else
+#error "DCACHE_RAM_SIZE is not a power of 2 and setup code is missing"
+#endif
+	post_code(POST_CAR_FILL)
+
+	/* Enable variable MTRRs */
+	mov	$MTRR_DEF_TYPE_MSR, %ecx
+	rdmsr
+	or	$MTRR_DEF_TYPE_EN, %eax
+	wrmsr
+
+	/* Enable caching */
+	mov	%cr0, %eax
+	and	$~(X86_CR0_CD | X86_CR0_NW), %eax
+	invd
+	mov	%eax, %cr0
+
+#if IS_ENABLED(CONFIG_INTEL_CAR_NEM)
+	jmp	car_nem
+#elif IS_ENABLED(CONFIG_INTEL_CAR_CQOS)
+	jmp	car_cqos
+#elif IS_ENABLED(CONFIG_INTEL_CAR_NEM_ENHANCED)
+	jmp	car_nem_enhanced
+#else
+#error "No CAR mechanism selected:
+#endif
+	jmp	car_init_ret
+
+fixed_mtrr_list:
+	.word	MTRR_FIX_64K_00000_MSR
+	.word	MTRR_FIX_16K_80000_MSR
+	.word	MTRR_FIX_16K_A0000_MSR
+	.word	MTRR_FIX_4K_C0000_MSR
+	.word	MTRR_FIX_4K_C8000_MSR
+	.word	MTRR_FIX_4K_D0000_MSR
+	.word	MTRR_FIX_4K_D8000_MSR
+	.word	MTRR_FIX_4K_E0000_MSR
+	.word	MTRR_FIX_4K_E8000_MSR
+	.word	MTRR_FIX_4K_F0000_MSR
+	.word	MTRR_FIX_4K_F8000_MSR
+fixed_mtrr_list_size = . - fixed_mtrr_list
+
+#if IS_ENABLED(CONFIG_INTEL_CAR_NEM)
+.global car_nem
+car_nem:
+	/* Disable cache eviction (setup stage) */
+	mov	$MSR_EVICT_CTL, %ecx
+	rdmsr
+	or	$0x1, %eax
+	wrmsr
+
+	post_code(0x26)
+
+	/* Clear the cache memory region. This will also fill up the cache */
+	movl	$CONFIG_DCACHE_RAM_BASE, %edi
+	movl	$CONFIG_DCACHE_RAM_SIZE, %ecx
+	shr	$0x02, %ecx
+	xor	%eax, %eax
+	cld
+	rep	stosl
+
+	post_code(0x27)
+
+	/* Disable cache eviction (run stage) */
+	mov	$MSR_EVICT_CTL, %ecx
+	rdmsr
+	or	$0x2, %eax
+	wrmsr
+
+	post_code(0x28)
+
+	jmp	car_init_ret
+
+#elif IS_ENABLED(CONFIG_INTEL_CAR_CQOS)
+.global car_cqos
+car_cqos:
+	/*
+	 * Create CBM_LEN_MASK based on CBM_LEN
+	 * Get CPUID.(EAX=10H, ECX=2H):EAX.CBM_LEN[bits 4:0]
+	 */
+	mov	$0x10, %eax
+	mov	$0x2,  %ecx
+	cpuid
+	and	$0x1f, %eax
+	add	$1, %al
+
+	mov	$1, %ebx
+	mov	%al, %cl
+	shl	%cl, %ebx
+	sub	$1, %ebx
+
+	/* Store the CBM_LEN_MASK in mm3 for later use */
+	movd	%ebx, %mm3
+
+	/*
+	 * Disable both L1 and L2 prefetcher. For yet-to-understood reason,
+	 * prefetchers slow down filling cache with rep stos in CQOS mode.
+	 */
+	mov	$MSR_PREFETCH_CTL, %ecx
+	rdmsr
+	or	$(PREFETCH_L1_DISABLE | PREFETCH_L2_DISABLE), %eax
+	wrmsr
+
+#if (CONFIG_DCACHE_RAM_SIZE == CONFIG_L2_CACHE_SIZE)
+/*
+ * If CAR size is set to full L2 size, mask is calculated as all-zeros.
+ * This is not supported by the CPU/uCode.
+ */
+#error "CQOS CAR may not use whole L2 cache area"
+#endif
+
+	/* Calculate how many bits to be used for CAR */
+	xor	%edx, %edx
+	mov	$CONFIG_DCACHE_RAM_SIZE, %eax	/* dividend */
+	mov	$CONFIG_CACHE_QOS_SIZE_PER_BIT, %ecx	/* divisor */
+	div	%ecx		/* result is in eax */
+	mov	%eax, %ecx	/* save to ecx */
+	mov	$1, %ebx
+	shl	%cl, %ebx
+	sub	$1, %ebx	/* resulting mask is is in ebx */
+
+	/* Set this mask for initial cache fill */
+	mov	$MSR_L2_QOS_MASK(0), %ecx
+	rdmsr
+	mov	%ebx, %eax
+	wrmsr
+
+	/* Set CLOS selector to 0 */
+	mov	$MSR_IA32_PQR_ASSOC, %ecx
+	rdmsr
+	and	$~MSR_IA32_PQR_ASSOC_MASK, %edx	/* select mask 0 */
+	wrmsr
+
+	/* We will need to block CAR region from evicts */
+	mov	$MSR_L2_QOS_MASK(1), %ecx
+	rdmsr
+	/* Invert bits that are to be used for cache */
+	mov	%ebx, %eax
+	xor	$~0, %eax			/* invert 32 bits */
+
+	/*
+	 * Use CBM_LEN_MASK stored in mm3 to set bits based on Capacity Bit
+	 * Mask Length.
+	 */
+	movd	%mm3, %ebx
+	and	%ebx, %eax
+	wrmsr
+
+	post_code(0x26)
+
+	/* Clear the cache memory region. This will also fill up the cache */
+	movl	$CONFIG_DCACHE_RAM_BASE, %edi
+	movl	$CONFIG_DCACHE_RAM_SIZE, %ecx
+	shr	$0x02, %ecx
+	xor	%eax, %eax
+	cld
+	rep	stosl
+
+	post_code(0x27)
+
+	/* Cache is populated. Use mask 1 that will block evicts */
+	mov	$MSR_IA32_PQR_ASSOC, %ecx
+	rdmsr
+	and	$~MSR_IA32_PQR_ASSOC_MASK, %edx	/* clear index bits first */
+	or	$1, %edx			/* select mask 1 */
+	wrmsr
+
+	/* Enable prefetchers */
+	mov	$MSR_PREFETCH_CTL, %ecx
+	rdmsr
+	and	$~(PREFETCH_L1_DISABLE | PREFETCH_L2_DISABLE), %eax
+	wrmsr
+
+	post_code(0x28)
+
+	jmp	car_init_ret
+
+#elif IS_ENABLED(CONFIG_INTEL_CAR_NEM_ENHANCED)
+.global car_nem_enhanced
+car_nem_enhanced:
+	/* Disable cache eviction (setup stage) */
+	mov	$MSR_EVICT_CTL, %ecx
+	rdmsr
+	or	$0x1, %eax
+	wrmsr
+	post_code(0x26)
+
+	/* Create n-way set associativity of cache */
+	xorl	%edi, %edi
+find_llc_subleaf:
+	movl	%edi, %ecx
+	movl	$0x04, %eax
+	cpuid
+	inc	%edi
+	and	$0xe0, %al	/* EAX[7:5] = Cache Level */
+	cmp	$0x60, %al	/* Check to see if it is LLC */
+	jnz	find_llc_subleaf
+
+	/*
+	 * Set MSR 0xC91 IA32_L3_MASK_! = 0xE/0xFE/0xFFE/0xFFFE
+	 * for 4/8/16 way of LLC
+	*/
+	shr	$22, %ebx
+	inc	%ebx
+	/* Calculate n-way associativity of LLC */
+	mov	%bl, %cl
+
+	/*
+	 * Maximizing RO cacheability while locking in the CAR to a
+	 * single way since that particular way won't be victim candidate
+	 * for evictions.
+	 * This has been done after programing LLC_WAY_MASK_1 MSR
+	 * with desired LLC way as mentioned below.
+	 *
+	 * Hence create Code and Data Size as per request
+	 * Code Size (RO) : Up to 16M
+	 * Data Size (RW) : Up to 256K
+	 */
+	movl	$0x01, %eax
+	/*
+	 * LLC Ways -> LLC_WAY_MASK_1:
+	 *  4: 0x000E
+	 *  8: 0x00FE
+	 * 12: 0x0FFE
+	 * 16: 0xFFFE
+	 *
+	 * These MSRs contain one bit per each way of LLC
+	 * - If this bit is '0' - the way is protected from eviction
+	 * - If this bit is '1' - the way is not protected from eviction
+	 */
+	shl	%cl, %eax
+	subl	$0x02, %eax
+	movl	$MSR_IA32_L3_MASK_1, %ecx
+	xorl	%edx, %edx
+	wrmsr
+	/*
+	 * Set MSR 0xC92 IA32_L3_MASK_2 = 0x1
+	 *
+	 * For SKL SOC, data size remains 256K consistently.
+	 * Hence, creating 1-way associative cache for Data
+	*/
+	mov	$MSR_IA32_L3_MASK_2, %ecx
+	mov	$0x01, %eax
+	xorl	%edx, %edx
+	wrmsr
+	/*
+	 * Set MSR_IA32_PQR_ASSOC = 0x02
+	 *
+	 * Possible values:
+	 * 0: Default value, no way mask should be applied
+	 * 1: Apply way mask 1 to LLC
+	 * 2: Apply way mask 2 to LLC
+	 * 3: Shouldn't be use in NEM Mode
+	 */
+	movl	$MSR_IA32_PQR_ASSOC, %ecx
+	movl	$0x02, %eax
+	xorl	%edx, %edx
+	wrmsr
+
+	movl	$CONFIG_DCACHE_RAM_BASE, %edi
+	movl	$CONFIG_DCACHE_RAM_SIZE, %ecx
+	shr	$0x02, %ecx
+	xor	%eax, %eax
+	cld
+	rep	stosl
+	/*
+	 * Set MSR_IA32_PQR_ASSOC = 0x01
+	 * At this stage we apply LLC_WAY_MASK_1 to the cache.
+	 * i.e. way 0 is protected from eviction.
+	*/
+	movl	$MSR_IA32_PQR_ASSOC, %ecx
+	movl	$0x01, %eax
+	xorl	%edx, %edx
+	wrmsr
+
+	post_code(0x27)
+	/*
+	 * Enable No-Eviction Mode Run State by setting
+	 * NO_EVICT_MODE MSR 2E0h bit [1] = '1'.
+	 */
+
+	movl	$MSR_EVICT_CTL, %ecx
+	rdmsr
+	orl	$0x02, %eax
+	wrmsr
+
+	post_code(0x28)
+
+	jmp	car_init_ret
+#endif
+
+#if CONFIG_IS_ENABLED(X86_16BIT_INIT)
+_dt_ucode_base_size:
+	/* These next two fields are filled in by binman */
+.globl ucode_base
+ucode_base:	/* Declared in microcode.h */
+	.long	0			/* microcode base */
+.globl ucode_size
+ucode_size:	/* Declared in microcode.h */
+	.long	0			/* microcode size */
+	.long	CONFIG_SYS_MONITOR_BASE	/* code region base */
+	.long	CONFIG_SYS_MONITOR_LEN	/* code region size */
+#endif
diff --git a/arch/x86/cpu/intel_common/car2_uninit.S b/arch/x86/cpu/intel_common/car2_uninit.S
new file mode 100644
index 0000000..aba3a53
--- /dev/null
+++ b/arch/x86/cpu/intel_common/car2_uninit.S
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2017 Intel Corp.
+ * Copyright 2019 Google LLC
+ * Taken from coreboot file exit_car.S
+ */
+
+#include <config.h>
+#include <asm/msr-index.h>
+#include <asm/mtrr.h>
+
+.text
+.global car_uninit
+car_uninit:
+
+	/*
+	 * Retrieve return address from stack as it will get trashed below if
+	 * execution is utilizing the cache-as-ram stack.
+	 */
+	pop	%ebx
+
+	/* Disable MTRRs */
+	mov	$(MTRR_DEF_TYPE_MSR), %ecx
+	rdmsr
+	and	$(~(MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN)), %eax
+	wrmsr
+
+#ifdef CONFIG_INTEL_CAR_NEM
+.global car_nem_teardown
+car_nem_teardown:
+
+	/* invalidate cache contents */
+	invd
+
+	/* Knock down bit 1 then bit 0 of NEM control not combining steps */
+	mov	$(MSR_EVICT_CTL), %ecx
+	rdmsr
+	and	$(~(1 << 1)), %eax
+	wrmsr
+	and	$(~(1 << 0)), %eax
+	wrmsr
+
+#elif IS_ENABLED(CONFIG_INTEL_CAR_CQOS)
+.global car_cqos_teardown
+car_cqos_teardown:
+
+	/* Go back to all-evicting mode, set both masks to all-1s */
+	mov	$MSR_L2_QOS_MASK(0), %ecx
+	rdmsr
+	mov	$~0, %al
+	wrmsr
+
+	mov	$MSR_L2_QOS_MASK(1), %ecx
+	rdmsr
+	mov	$~0, %al
+	wrmsr
+
+	/* Reset CLOS selector to 0 */
+	mov	$MSR_IA32_PQR_ASSOC, %ecx
+	rdmsr
+	and	$~MSR_IA32_PQR_ASSOC_MASK, %edx
+	wrmsr
+
+#elif IS_ENABLED(CONFIG_INTEL_CAR_NEM_ENHANCED)
+.global car_nem_enhanced_teardown
+car_nem_enhanced_teardown:
+
+	/* invalidate cache contents */
+	invd
+
+	/* Knock down bit 1 then bit 0 of NEM control not combining steps */
+	mov	$(MSR_EVICT_CTL), %ecx
+	rdmsr
+	and	$(~(1 << 1)), %eax
+	wrmsr
+	and	$(~(1 << 0)), %eax
+	wrmsr
+
+	/* Reset CLOS selector to 0 */
+	mov	$IA32_PQR_ASSOC, %ecx
+	rdmsr
+	and	$~IA32_PQR_ASSOC_MASK, %edx
+	wrmsr
+#endif
+
+	/* Return to caller */
+	jmp	*%ebx
diff --git a/arch/x86/cpu/intel_common/fast_spi.c b/arch/x86/cpu/intel_common/fast_spi.c
new file mode 100644
index 0000000..a6e3d0a
--- /dev/null
+++ b/arch/x86/cpu/intel_common/fast_spi.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/cpu_common.h>
+#include <asm/fast_spi.h>
+#include <asm/pci.h>
+
+/*
+ * Returns bios_start and fills in size of the BIOS region.
+ */
+static ulong fast_spi_get_bios_region(struct fast_spi_regs *regs,
+				      uint *bios_size)
+{
+	ulong bios_start, bios_end;
+
+	/*
+	 * BIOS_BFPREG provides info about BIOS-Flash Primary Region Base and
+	 * Limit. Base and Limit fields are in units of 4K.
+	 */
+	u32 val = readl(&regs->bfp);
+
+	bios_start = (val & SPIBAR_BFPREG_PRB_MASK) << 12;
+	bios_end = (((val & SPIBAR_BFPREG_PRL_MASK) >>
+		     SPIBAR_BFPREG_PRL_SHIFT) + 1) << 12;
+	*bios_size = bios_end - bios_start;
+
+	return bios_start;
+}
+
+int fast_spi_get_bios_mmap(pci_dev_t pdev, ulong *map_basep, uint *map_sizep,
+			   uint *offsetp)
+{
+	struct fast_spi_regs *regs;
+	ulong bar, base, mmio_base;
+
+	/* Special case to find mapping without probing the device */
+	pci_x86_read_config(pdev, PCI_BASE_ADDRESS_0, &bar, PCI_SIZE_32);
+	mmio_base = bar & PCI_BASE_ADDRESS_MEM_MASK;
+	regs = (struct fast_spi_regs *)mmio_base;
+	base = fast_spi_get_bios_region(regs, map_sizep);
+	*map_basep = (u32)-*map_sizep - base;
+	*offsetp = base;
+
+	return 0;
+}
+
+int fast_spi_early_init(pci_dev_t pdev, ulong mmio_base)
+{
+	/* Program Temporary BAR for SPI */
+	pci_x86_write_config(pdev, PCI_BASE_ADDRESS_0,
+			     mmio_base | PCI_BASE_ADDRESS_SPACE_MEMORY,
+			     PCI_SIZE_32);
+
+	/* Enable Bus Master and MMIO Space */
+	pci_x86_clrset_config(pdev, PCI_COMMAND, 0, PCI_COMMAND_MASTER |
+			      PCI_COMMAND_MEMORY, PCI_SIZE_8);
+
+	/*
+	 * Disable the BIOS write protect so write commands are allowed.
+	 * Enable Prefetching and caching.
+	 */
+	pci_x86_clrset_config(pdev, SPIBAR_BIOS_CONTROL,
+			      SPIBAR_BIOS_CONTROL_EISS |
+			      SPIBAR_BIOS_CONTROL_CACHE_DISABLE,
+			      SPIBAR_BIOS_CONTROL_WPD |
+			      SPIBAR_BIOS_CONTROL_PREFETCH_ENABLE, PCI_SIZE_8);
+
+	return 0;
+}
diff --git a/arch/x86/cpu/intel_common/lpss.c b/arch/x86/cpu/intel_common/lpss.c
new file mode 100644
index 0000000..26a2d2d
--- /dev/null
+++ b/arch/x86/cpu/intel_common/lpss.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Special driver to handle of-platdata
+ *
+ * Copyright 2019 Google LLC
+ *
+ * Some code from coreboot lpss.c
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/lpss.h>
+
+enum {
+	LPSS_RESET_CTL_REG	= 0x204,
+
+	/*
+	 * Bit 1:0 controls LPSS controller reset.
+	 *
+	 * 00 ->LPSS Host Controller is in reset (Reset Asserted)
+	 * 01/10 ->Reserved
+	 * 11 ->LPSS Host Controller is NOT at reset (Reset Released)
+	 */
+	LPSS_CNT_RST_RELEASE	= 3,
+
+	/* Power management control and status register */
+	PME_CTRL_STATUS		= 0x84,
+
+	/* Bit 1:0 Powerstate, controls D0 and D3 state */
+	POWER_STATE_MASK	= 3,
+};
+
+/* Take controller out of reset */
+void lpss_reset_release(void *regs)
+{
+	writel(LPSS_CNT_RST_RELEASE, regs + LPSS_RESET_CTL_REG);
+}
+
+void lpss_set_power_state(struct udevice *dev, enum lpss_pwr_state state)
+{
+	dm_pci_clrset_config8(dev, PME_CTRL_STATUS, POWER_STATE_MASK, state);
+}
diff --git a/arch/x86/cpu/irq.c b/arch/x86/cpu/irq.c
index 3adc155..ed9938f 100644
--- a/arch/x86/cpu/irq.c
+++ b/arch/x86/cpu/irq.c
@@ -350,14 +350,6 @@ int irq_router_probe(struct udevice *dev)
 	return 0;
 }
 
-ulong write_pirq_routing_table(ulong addr)
-{
-	if (!gd->arch.pirq_routing_table)
-		return addr;
-
-	return copy_pirq_routing_table(addr, gd->arch.pirq_routing_table);
-}
-
 static const struct udevice_id irq_router_ids[] = {
 	{ .compatible = "intel,irq-router" },
 	{ }
@@ -370,8 +362,3 @@ U_BOOT_DRIVER(irq_router_drv) = {
 	.probe		= irq_router_probe,
 	.priv_auto_alloc_size = sizeof(struct irq_router),
 };
-
-UCLASS_DRIVER(irq) = {
-	.id		= UCLASS_IRQ,
-	.name		= "irq",
-};
diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c
index 51ca4ad..cf34f94 100644
--- a/arch/x86/cpu/ivybridge/sdram.c
+++ b/arch/x86/cpu/ivybridge/sdram.c
@@ -116,7 +116,7 @@ static int prepare_mrc_cache(struct pei_data *pei_data)
 	ret = read_seed_from_cmos(pei_data);
 	if (ret)
 		return ret;
-	ret = mrccache_get_region(NULL, &entry);
+	ret = mrccache_get_region(MRC_TYPE_NORMAL, NULL, &entry);
 	if (ret)
 		return ret;
 	mrc_cache = mrccache_find_current(&entry);
@@ -538,12 +538,14 @@ int dram_init(void)
 
 	/* S3 resume: don't save scrambler seed or MRC data */
 	if (pei_data->boot_mode != PEI_BOOT_RESUME) {
+		struct mrc_output *mrc = &gd->arch.mrc[MRC_TYPE_NORMAL];
+
 		/*
 		 * This will be copied to SDRAM in reserve_arch(), then written
 		 * to SPI flash in mrccache_save()
 		 */
-		gd->arch.mrc_output = (char *)pei_data->mrc_output;
-		gd->arch.mrc_output_len = pei_data->mrc_output_len;
+		mrc->buf = (char *)pei_data->mrc_output;
+		mrc->len = pei_data->mrc_output_len;
 		ret = write_seeds_to_cmos(pei_data);
 		if (ret)
 			debug("Failed to write seeds to CMOS: %d\n", ret);
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index fefbf8f..7b09f90 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -418,69 +418,6 @@ static int init_bsp(struct udevice **devp)
 	return 0;
 }
 
-#ifdef CONFIG_QFW
-static int qemu_cpu_fixup(void)
-{
-	int ret;
-	int cpu_num;
-	int cpu_online;
-	struct udevice *dev, *pdev;
-	struct cpu_platdata *plat;
-	char *cpu;
-
-	/* first we need to find '/cpus' */
-	for (device_find_first_child(dm_root(), &pdev);
-	     pdev;
-	     device_find_next_child(&pdev)) {
-		if (!strcmp(pdev->name, "cpus"))
-			break;
-	}
-	if (!pdev) {
-		printf("unable to find cpus device\n");
-		return -ENODEV;
-	}
-
-	/* calculate cpus that are already bound */
-	cpu_num = 0;
-	for (uclass_find_first_device(UCLASS_CPU, &dev);
-	     dev;
-	     uclass_find_next_device(&dev)) {
-		cpu_num++;
-	}
-
-	/* get actual cpu number */
-	cpu_online = qemu_fwcfg_online_cpus();
-	if (cpu_online < 0) {
-		printf("unable to get online cpu number: %d\n", cpu_online);
-		return cpu_online;
-	}
-
-	/* bind addtional cpus */
-	dev = NULL;
-	for (; cpu_num < cpu_online; cpu_num++) {
-		/*
-		 * allocate device name here as device_bind_driver() does
-		 * not copy device name, 8 bytes are enough for
-		 * sizeof("cpu@") + 3 digits cpu number + '\0'
-		 */
-		cpu = malloc(8);
-		if (!cpu) {
-			printf("unable to allocate device name\n");
-			return -ENOMEM;
-		}
-		sprintf(cpu, "cpu@%d", cpu_num);
-		ret = device_bind_driver(pdev, "cpu_qemu", cpu, &dev);
-		if (ret) {
-			printf("binding cpu@%d failed: %d\n", cpu_num, ret);
-			return ret;
-		}
-		plat = dev_get_parent_platdata(dev);
-		plat->cpu_id = cpu_num;
-	}
-	return 0;
-}
-#endif
-
 int mp_init(struct mp_params *p)
 {
 	int num_aps;
@@ -494,11 +431,11 @@ int mp_init(struct mp_params *p)
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_QFW
-	ret = qemu_cpu_fixup();
-	if (ret)
-		return ret;
-#endif
+	if (IS_ENABLED(CONFIG_QFW)) {
+		ret = qemu_cpu_fixup();
+		if (ret)
+			return ret;
+	}
 
 	ret = init_bsp(&cpu);
 	if (ret) {
diff --git a/arch/x86/cpu/qfw_cpu.c b/arch/x86/cpu/qfw_cpu.c
new file mode 100644
index 0000000..49e9dfc
--- /dev/null
+++ b/arch/x86/cpu/qfw_cpu.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Google, Inc
+ */
+
+#include <common.h>
+#include <cpu.h>
+#include <dm.h>
+#include <qfw.h>
+#include <dm/lists.h>
+#include <dm/uclass-internal.h>
+#include <dm/root.h>
+
+int qemu_cpu_fixup(void)
+{
+	int ret;
+	int cpu_num;
+	int cpu_online;
+	struct udevice *dev, *pdev;
+	struct cpu_platdata *plat;
+	char *cpu;
+
+	/* first we need to find '/cpus' */
+	for (device_find_first_child(dm_root(), &pdev);
+	     pdev;
+	     device_find_next_child(&pdev)) {
+		if (!strcmp(pdev->name, "cpus"))
+			break;
+	}
+	if (!pdev) {
+		printf("unable to find cpus device\n");
+		return -ENODEV;
+	}
+
+	/* calculate cpus that are already bound */
+	cpu_num = 0;
+	for (uclass_find_first_device(UCLASS_CPU, &dev);
+	     dev;
+	     uclass_find_next_device(&dev)) {
+		cpu_num++;
+	}
+
+	/* get actual cpu number */
+	cpu_online = qemu_fwcfg_online_cpus();
+	if (cpu_online < 0) {
+		printf("unable to get online cpu number: %d\n", cpu_online);
+		return cpu_online;
+	}
+
+	/* bind addtional cpus */
+	dev = NULL;
+	for (; cpu_num < cpu_online; cpu_num++) {
+		/*
+		 * allocate device name here as device_bind_driver() does
+		 * not copy device name, 8 bytes are enough for
+		 * sizeof("cpu@") + 3 digits cpu number + '\0'
+		 */
+		cpu = malloc(8);
+		if (!cpu) {
+			printf("unable to allocate device name\n");
+			return -ENOMEM;
+		}
+		sprintf(cpu, "cpu@%d", cpu_num);
+		ret = device_bind_driver(pdev, "cpu_qemu", cpu, &dev);
+		if (ret) {
+			printf("binding cpu@%d failed: %d\n", cpu_num, ret);
+			return ret;
+		}
+		plat = dev_get_parent_platdata(dev);
+		plat->cpu_id = cpu_num;
+	}
+	return 0;
+}
diff --git a/arch/x86/cpu/quark/dram.c b/arch/x86/cpu/quark/dram.c
index 995e119..2bf90dc 100644
--- a/arch/x86/cpu/quark/dram.c
+++ b/arch/x86/cpu/quark/dram.c
@@ -24,7 +24,7 @@ static __maybe_unused int prepare_mrc_cache(struct mrc_params *mrc_params)
 	struct mrc_region entry;
 	int ret;
 
-	ret = mrccache_get_region(NULL, &entry);
+	ret = mrccache_get_region(MRC_TYPE_NORMAL, NULL, &entry);
 	if (ret)
 		return ret;
 
@@ -154,9 +154,11 @@ int dram_init(void)
 #ifdef CONFIG_ENABLE_MRC_CACHE
 	cache = malloc(sizeof(struct mrc_timings));
 	if (cache) {
+		struct mrc_output *mrc = &gd->arch.mrc[MRC_TYPE_NORMAL];
+
 		memcpy(cache, &mrc_params.timings, sizeof(struct mrc_timings));
-		gd->arch.mrc_output = cache;
-		gd->arch.mrc_output_len = sizeof(struct mrc_timings);
+		mrc->buf = cache;
+		mrc->len = sizeof(struct mrc_timings);
 	}
 #endif
 
diff --git a/arch/x86/cpu/slimbootloader/Kconfig b/arch/x86/cpu/slimbootloader/Kconfig
index 3ea4c99..58a9ca0 100644
--- a/arch/x86/cpu/slimbootloader/Kconfig
+++ b/arch/x86/cpu/slimbootloader/Kconfig
@@ -17,3 +17,4 @@ config SYS_SLIMBOOTLOADER
 	imply USB_EHCI_HCD
 	imply USB_XHCI_HCD
 	imply E1000
+	imply X86_TSC_READ_BASE
diff --git a/arch/x86/cpu/u-boot-spl.lds b/arch/x86/cpu/u-boot-spl.lds
index c1e9bfb..e6c2289 100644
--- a/arch/x86/cpu/u-boot-spl.lds
+++ b/arch/x86/cpu/u-boot-spl.lds
@@ -17,7 +17,10 @@ SECTIONS
 
 	. = IMAGE_TEXT_BASE;	/* Location of bootcode in flash */
 	__text_start = .;
-	.text  : { *(.text*); }
+	.text  : {
+		__image_copy_start = .;
+		*(.text*);
+	}
 
 	. = ALIGN(4);
 
diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile
index d4bdf62..be209aa 100644
--- a/arch/x86/dts/Makefile
+++ b/arch/x86/dts/Makefile
@@ -2,6 +2,7 @@
 
 dtb-y += bayleybay.dtb \
 	cherryhill.dtb \
+	chromebook_coral.dtb \
 	chromebook_link.dtb \
 	chromebox_panther.dtb \
 	chromebook_samus.dtb \
diff --git a/arch/x86/dts/chromebook_coral.dts b/arch/x86/dts/chromebook_coral.dts
new file mode 100644
index 0000000..24fcbb5
--- /dev/null
+++ b/arch/x86/dts/chromebook_coral.dts
@@ -0,0 +1,831 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/dts-v1/;
+
+#include <dt-bindings/gpio/x86-gpio.h>
+
+/include/ "skeleton.dtsi"
+/include/ "keyboard.dtsi"
+/include/ "reset.dtsi"
+/include/ "rtc.dtsi"
+/include/ "tsc_timer.dtsi"
+
+#ifdef CONFIG_CHROMEOS
+#include "chromeos-x86.dtsi"
+#include "flashmap-x86-ro.dtsi"
+#include "flashmap-16mb-rw.dtsi"
+#endif
+
+#include <asm/intel_pinctrl_defs.h>
+#include <asm/arch-apollolake/cpu.h>
+#include <asm/arch-apollolake/gpio.h>
+#include <asm/arch-apollolake/iomap.h>
+#include <asm/arch-apollolake/pm.h>
+
+/ {
+	model = "Google Coral";
+	compatible = "google,coral", "intel,apollolake";
+
+	aliases {
+		cros-ec0 = &cros_ec;
+		fsp = &fsp_s;
+		spi0 = &spi;
+	};
+
+	config {
+	       silent_console = <0>;
+	};
+
+	chosen {
+		stdout-path = &serial;
+	};
+
+	cpus {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			u-boot,dm-pre-reloc;
+			device_type = "cpu";
+			compatible = "intel,apl-cpu";
+			reg = <0>;
+			intel,apic-id = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "intel,apl-cpu";
+			reg = <1>;
+			intel,apic-id = <2>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "intel,apl-cpu";
+			reg = <2>;
+			intel,apic-id = <4>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "intel,apl-cpu";
+			reg = <3>;
+			intel,apic-id = <6>;
+		};
+
+	};
+
+	keyboard {
+		intel,duplicate-por;
+	};
+
+	pci {
+		compatible = "pci-x86";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		u-boot,dm-pre-reloc;
+		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0 0x10000000
+			0x42000000 0x0 0xb0000000 0xb0000000 0 0x10000000
+			0x01000000 0x0 0x1000 0x1000 0 0xefff>;
+		u-boot,skip-auto-config-until-reloc;
+
+		host_bridge: host-bridge@0,0 {
+			u-boot,dm-pre-reloc;
+			reg = <0x00000000 0 0 0 0>;
+			compatible = "intel,apl-hostbridge";
+			pciex-region-size = <0x10000000>;
+			/*
+			 * Parameters used by the FSP-S binary blob. This is
+			 * really unfortunate since these parameters mostly
+			 * relate to drivers but we need them in one place. We
+			 * could put them in the driver nodes easily, but then
+			 * would have to scan each node to find them. So just
+			 * dump them here for now.
+			 */
+			fsp_s: fsp-s {
+			};
+		};
+
+		punit@0,1 {
+			u-boot,dm-pre-reloc;
+			reg = <0x00000800 0 0 0 0>;
+			compatible = "intel,apl-punit";
+		};
+
+		p2sb: p2sb@d,0 {
+			u-boot,dm-pre-reloc;
+			reg = <0x02006810 0 0 0 0>;
+			compatible = "intel,apl-p2sb";
+			early-regs = <IOMAP_P2SB_BAR 0x100000>;
+
+			n {
+				compatible = "intel,apl-pinctrl";
+				u-boot,dm-pre-reloc;
+				intel,p2sb-port-id = <PID_GPIO_N>;
+				gpio_n: gpio-n {
+					compatible = "intel,gpio";
+					u-boot,dm-pre-reloc;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			nw {
+				u-boot,dm-pre-reloc;
+				compatible = "intel,apl-pinctrl";
+				intel,p2sb-port-id = <PID_GPIO_NW>;
+				#gpio-cells = <2>;
+				gpio_nw: gpio-nw {
+					compatible = "intel,gpio";
+					u-boot,dm-pre-reloc;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			w {
+				u-boot,dm-pre-reloc;
+				compatible = "intel,apl-pinctrl";
+				intel,p2sb-port-id = <PID_GPIO_W>;
+				#gpio-cells = <2>;
+				gpio_w: gpio-w {
+					compatible = "intel,gpio";
+					u-boot,dm-pre-reloc;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			sw {
+				u-boot,dm-pre-reloc;
+				compatible = "intel,apl-pinctrl";
+				intel,p2sb-port-id = <PID_GPIO_SW>;
+				#gpio-cells = <2>;
+				gpio_sw: gpio-sw {
+					compatible = "intel,gpio";
+					u-boot,dm-pre-reloc;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			itss {
+				u-boot,dm-pre-reloc;
+				compatible = "intel,apl-itss";
+				intel,p2sb-port-id = <PID_ITSS>;
+				intel,pmc-routes = <
+					PMC_GPE_SW_31_0 GPIO_GPE_SW_31_0
+					PMC_GPE_SW_63_32 GPIO_GPE_SW_63_32
+					PMC_GPE_NW_31_0 GPIO_GPE_NW_31_0
+					PMC_GPE_NW_63_32 GPIO_GPE_NW_63_32
+					PMC_GPE_NW_95_64 GPIO_GPE_NW_95_64
+					PMC_GPE_N_31_0 GPIO_GPE_N_31_0
+					PMC_GPE_N_63_32 GPIO_GPE_N_63_32
+					PMC_GPE_W_31_0 GPIO_GPE_W_31_0>;
+			};
+		};
+
+		pmc@d,1 {
+			u-boot,dm-pre-reloc;
+			reg = <0x6900 0 0 0 0>;
+
+			/*
+			 * Values for BAR0, BAR2 and ACPI_BASE for when PCI
+			 * auto-configure is not available
+			 */
+			early-regs = <0xfe042000 0x2000
+				0xfe044000 0x2000
+				IOMAP_ACPI_BASE IOMAP_ACPI_SIZE>;
+			compatible = "intel,apl-pmc";
+			gpe0-dwx-mask = <0xf>;
+			gpe0-dwx-shift-base = <4>;
+
+			/*
+			 * GPE configuration
+			 * Note that GPE events called out in ASL code rely on
+			 * this route, i.e., if this route changes then the
+			 * affected GPE * offset bits also need to be changed.
+			 * This sets the PMC register GPE_CFG fields.
+			 */
+			gpe0-dw = <PMC_GPE_N_31_0
+				PMC_GPE_N_63_32
+				PMC_GPE_SW_31_0>;
+			gpe0-sts = <0x20>;
+			gpe0-en = <0x30>;
+		};
+
+		spi: fast-spi@d,2 {
+			u-boot,dm-pre-reloc;
+			reg = <0x02006a10 0 0 0 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "intel,fast-spi";
+			early-regs = <IOMAP_SPI_BASE 0x1000>;
+			intel,hardware-seq = <1>;
+
+			fwstore_spi: spi-flash@0 {
+				#size-cells = <1>;
+				#address-cells = <1>;
+				u-boot,dm-pre-reloc;
+				reg = <0>;
+				compatible = "winbond,w25q128fw",
+					 "jedec,spi-nor";
+				rw-mrc-cache {
+					label = "rw-mrc-cache";
+					reg = <0x008e0000 0x00010000>;
+					u-boot,dm-pre-reloc;
+				};
+				rw-var-mrc-cache {
+					label = "rw-mrc-cache";
+					reg = <0x008f0000 0x0001000>;
+					u-boot,dm-pre-reloc;
+				};
+			};
+		};
+
+		serial: serial@18,2 {
+			reg = <0x0200c210 0 0 0 0>;
+			u-boot,dm-pre-reloc;
+			compatible = "intel,apl-ns16550";
+			early-regs = <0xde000000 0x20>;
+			reg-shift = <2>;
+			clock-frequency = <1843200>;
+			current-speed = <115200>;
+		};
+
+		pch: pch@1f,0 {
+			reg = <0x0000f800 0 0 0 0>;
+			compatible = "intel,apl-pch";
+			u-boot,dm-pre-reloc;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			lpc {
+				compatible = "intel,apl-lpc";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				u-boot,dm-pre-reloc;
+				cros_ec: cros-ec {
+					u-boot,dm-pre-reloc;
+					compatible = "google,cros-ec-lpc";
+					reg = <0x204 1 0x200 1 0x880 0x80>;
+
+					/*
+					 * Describes the flash memory within
+					 * the EC
+					 */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					flash@8000000 {
+						reg = <0x08000000 0x20000>;
+						erase-value = <0xff>;
+					};
+				};
+			};
+		};
+	};
+
+};
+
+&host_bridge {
+	/*
+	 * PL1 override 12000 mW: the energy calculation is wrong with the
+	 * current VR solution. Experiments show that SoC TDP max (6W) can be
+	 * reached when RAPL PL1 is set to 12W. Set RAPL PL2 to 15W.
+	 */
+	tdp-pl-override-mw = <12000 15000>;
+
+	early-pads = <
+		/* These two are for the debug UART */
+		GPIO_46 /* UART2 RX */
+			(PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
+			(PAD_CFG1_PULL_NATIVE | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
+
+		GPIO_47 /* UART2 TX */
+			(PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
+			(PAD_CFG1_PULL_NATIVE | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
+
+		GPIO_75 /* I2S1_BCLK -- PCH_WP */
+			(PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP)
+			(PAD_CFG1_PULL_UP_20K | PAD_CFG1_IOSSTATE_TXD_RXE)
+
+		/* I2C2 - TPM  */
+		GPIO_128 /* LPSS_I2C2_SDA */
+			(PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
+			(PAD_CFG1_PULL_UP_2K | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
+		GPIO_129 /* LPSS_I2C2_SCL */
+			(PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
+			(PAD_CFG1_PULL_UP_2K | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
+		GPIO_28 /* TPM IRQ */
+			(PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP |
+				PAD_CFG0_TX_DISABLE | PAD_CFG0_ROUTE_IOAPIC |
+				PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_INVERT)
+			(PAD_CFG1_PULL_NONE | PAD_CFG1_IOSSTATE_TXD_RXE)
+
+		/*
+		 * WLAN_PE_RST - default to deasserted just in case FSP
+		 * misbehaves
+		 */
+		GPIO_122  /* SIO_SPI_2_RXD */
+			(PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP |
+				PAD_CFG0_RX_DISABLE | 0)
+			(PAD_CFG1_PULL_NONE | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
+
+		/* LPC */
+		PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1) /* LPC_SERIRQ */
+		PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1) /* LPC_CLKOUT0 */
+		PAD_CFG_NF(LPC_CLKOUT1, UP_20K, DEEP, NF1)
+		PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1)	 /* LPC_AD0 */
+		PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1)	 /* LPC_AD1 */
+		PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1)	 /* LPC_AD2 */
+		PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1)	 /* LPC_AD3 */
+		PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */
+		PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */
+		>;
+
+	lpddr4-swizzle = /bits/ 8 <
+		/* LP4_PHYS_CH0A */
+
+		/* DQA[0:7] pins of LPDDR4 module */
+		6 7 5 4 3 1 0 2
+		/* DQA[8:15] pins of LPDDR4 module */
+		12 10 11 13 14 8 9 15
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
+		16 22 23 20 18 17 19 21
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
+		30 28 29 25 24 26 27 31
+
+		/* LP4_PHYS_CH0B */
+		/* DQA[0:7] pins of LPDDR4 module */
+		7 3 5 2 6 0 1 4
+		/* DQA[8:15] pins of LPDDR4 module */
+		 9 14 12 13 10 11 8 15
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
+		20 22 23 16 19 17 18 21
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
+		28 24 26 27 29 30 31 25
+
+		/* LP4_PHYS_CH1A */
+
+		/* DQA[0:7] pins of LPDDR4 module */
+		2 1 6 7 5 4 3 0
+		/* DQA[8:15] pins of LPDDR4 module */
+		11 10 8 9 12 15 13 14
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
+		17 23 19 16 21 22 20 18
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
+		31 29 26 25 28 27 24 30
+
+		/* LP4_PHYS_CH1B */
+
+		/* DQA[0:7] pins of LPDDR4 module */
+		4 3 7 5 6 1 0 2
+		/* DQA[8:15] pins of LPDDR4 module */
+		15 9 8 11 14 13 12 10
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
+		20 23 22 21 18 19 16 17
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
+		25 28 30 31 26 27 24 29>;
+};
+
+&fsp_s {
+	u-boot,dm-pre-proper;
+
+	/* Disable unused clkreq of PCIe root ports */
+	pcie-rp-clkreq-pin = /bits/ 8 <0 /* wifi/bt */
+		CLKREQ_DISABLED
+		CLKREQ_DISABLED
+		CLKREQ_DISABLED
+		CLKREQ_DISABLED
+		CLKREQ_DISABLED>;
+
+	/*
+	 * GPIO for PERST_0
+	 * If the Board has PERST_0 signal, assign the GPIO
+	 * If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
+	 *
+	 * This are not used yet, so comment them out for now.
+	 *
+	 * prt0-gpio = <GPIO_122>;
+	 *
+	 * GPIO for SD card detect
+	 * sdcard-cd-gpio = <GPIO_177>;
+	 */
+
+	/*
+	 * Order is emmc-tx-data-cntl1, emmc-tx-data-cntl2,
+	 * emmc-rx-cmd-data-cntl1, emmc-rx-cmd-data-cntl2
+	 *
+	 * EMMC TX DATA Delay 1
+	 * Refer to EDS-Vol2-22.3
+	 * [14:8] steps of delay for HS400, each 125ps
+	 * [6:0] steps of delay for SDR104/HS200, each 125ps
+
+	/*
+	 * EMMC TX DATA Delay 2
+	 * Refer to EDS-Vol2-22.3.
+	 * [30:24] steps of delay for SDR50, each 125ps
+	 * [22:16] steps of delay for DDR50, each 125ps
+	 * [14:8] steps of delay for SDR25/HS50, each 125ps
+	 * [6:0] steps of delay for SDR12, each 125ps
+	 */
+
+	/*
+	 * EMMC RX CMD/DATA Delay 1
+	 * Refer to EDS-Vol2-22.3.
+	 * [30:24] steps of delay for SDR50, each 125ps
+	 * [22:16] steps of delay for DDR50, each 125ps
+	 * [14:8] steps of delay for SDR25/HS50, each 125ps
+	 * [6:0] steps of delay for SDR12, each 125ps
+	 */
+
+	/*
+	 * EMMC RX CMD/DATA Delay 2
+	 * Refer to EDS-Vol2-22.3.
+	 * [17:16] stands for Rx Clock before Output Buffer
+	 * [14:8] steps of delay for Auto Tuning Mode, each 125ps
+	 * [6:0] steps of delay for HS200, each 125ps
+	 */
+	emmc = <0x0c16 0x28162828 0x00181717 0x10008>;
+
+	/* Enable DPTF */
+	dptf-enable;
+
+	/* Enable Audio Clock and Power gating */
+	hdaudio-clk-gate-enable;
+	hdaudio-pwr-gate-enable;
+	hdaudio-bios-config-lockdown;
+
+	/* Enable lpss s0ix */
+	lpss-s0ix-enable;
+
+	/*
+	 * TODO(sjg@chromium.org): Move this to the I2C nodes
+	 * Intel Common SoC Config
+	 *+-------------------+---------------------------+
+	 *| Field             |  Value                    |
+	 *+-------------------+---------------------------+
+	 *| I2C0              | Audio                     |
+	 *| I2C2              | TPM                       |
+	 *| I2C3              | Touchscreen               |
+	 *| I2C4              | Trackpad                  |
+	 *| I2C5              | Digitizer                 |
+	 *+-------------------+---------------------------+
+	 *
+	common_soc_config" = "{
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+			.rise-time-ns = 104,
+			.fall-time-ns = 52,
+		},
+		.i2c[2] = {
+			.early_init = 1,
+			.speed = I2C_SPEED_FAST,
+			.rise-time-ns = 57,
+			.fall-time-ns = 28,
+		},
+		.i2c[3] = {
+			.speed = I2C_SPEED_FAST,
+			.rise-time-ns = 76,
+			.fall-time-ns = 164,
+		},
+		.i2c[4] = {
+			.speed = I2C_SPEED_FAST,
+			.rise-time-ns = 114,
+			.fall-time-ns = 164,
+			.data_hold_time_ns = 350,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.rise-time-ns = 152,
+			.fall-time-ns = 30,
+		},
+	}"
+	*/
+
+	/* Minimum SLP S3 assertion width 28ms */
+	slp-s3-assertion-width-usecs = <28000>;
+
+	pads = <
+		/* PCIE_WAKE[0:3]_N */
+		PAD_CFG_GPI_SCI_LOW(GPIO_205, UP_20K, DEEP, EDGE_SINGLE) /* WLAN */
+		PAD_CFG_GPI(GPIO_206, UP_20K, DEEP)	 /* Unused */
+		PAD_CFG_GPI(GPIO_207, UP_20K, DEEP)	 /* Unused */
+		PAD_CFG_GPI(GPIO_208, UP_20K, DEEP)	 /* Unused */
+
+		/* EMMC interface */
+		PAD_CFG_NF(GPIO_156, DN_20K, DEEP, NF1) /* EMMC_CLK */
+		PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_157, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D0 */
+		PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_158, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D1 */
+		PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_159, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D2 */
+		PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_160, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D3 */
+		PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_161, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D4 */
+		PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_162, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D5 */
+		PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_163, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D6 */
+		PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_164, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D7 */
+		PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_165, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_CMD */
+		PAD_CFG_NF(GPIO_182, DN_20K, DEEP, NF1) /* EMMC_RCLK */
+
+		/* SDIO -- unused */
+		PAD_CFG_GPI(GPIO_166, UP_20K, DEEP)	 /* SDIO_CLK */
+		PAD_CFG_GPI(GPIO_167, UP_20K, DEEP)	 /* SDIO_D0 */
+		/* Configure SDIO to enable power gating */
+		PAD_CFG_NF(GPIO_168, UP_20K, DEEP, NF1)	/* SDIO_D1 */
+		PAD_CFG_GPI(GPIO_169, UP_20K, DEEP)	 /* SDIO_D2 */
+		PAD_CFG_GPI(GPIO_170, UP_20K, DEEP)	 /* SDIO_D3 */
+		PAD_CFG_GPI(GPIO_171, UP_20K, DEEP)	 /* SDIO_CMD */
+
+		/* SDCARD */
+		/* Pull down clock by 20K */
+		PAD_CFG_NF(GPIO_172, DN_20K, DEEP, NF1) /* SDCARD_CLK */
+		PAD_CFG_NF(GPIO_173, UP_20K, DEEP, NF1) /* SDCARD_D0 */
+		PAD_CFG_NF(GPIO_174, UP_20K, DEEP, NF1) /* SDCARD_D1 */
+		PAD_CFG_NF(GPIO_175, UP_20K, DEEP, NF1) /* SDCARD_D2 */
+		PAD_CFG_NF(GPIO_176, UP_20K, DEEP, NF1) /* SDCARD_D3 */
+		/* Card detect is active LOW with external pull up */
+		PAD_CFG_NF(GPIO_177, NONE, DEEP, NF1) /* SDCARD_CD_N */
+		PAD_CFG_NF(GPIO_178, UP_20K, DEEP, NF1) /* SDCARD_CMD */
+		/* CLK feedback, internal signal, needs 20K pull down */
+		PAD_CFG_NF(GPIO_179, DN_20K, DEEP, NF1) /* SDCARD_CLK_FB */
+		/* No h/w write proect for uSD cards, pull down by 20K */
+		PAD_CFG_NF(GPIO_186, DN_20K, DEEP, NF1) /* SDCARD_LVL_WP */
+		/* EN_SD_SOCKET_PWR_L for SD slot power control. Default on */
+		PAD_CFG_GPO(GPIO_183, 0, DEEP)		 /* SDIO_PWR_DOWN_N */
+
+		/* SMBus -- unused */
+		PAD_CFG_GPI(SMB_ALERTB, UP_20K, DEEP)	 /* SMB_ALERT _N */
+		PAD_CFG_GPI(SMB_CLK, UP_20K, DEEP)	 /* SMB_CLK */
+		PAD_CFG_GPI(SMB_DATA, UP_20K, DEEP)	 /* SMB_DATA */
+
+		/* LPC */
+		PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1) /* LPC_SERIRQ */
+		PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1) /* LPC_CLKOUT0 */
+		PAD_CFG_NF(LPC_CLKOUT1, UP_20K, DEEP, NF1)
+		PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1)	 /* LPC_AD0 */
+		PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1)	 /* LPC_AD1 */
+		PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1)	 /* LPC_AD2 */
+		PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1)	 /* LPC_AD3 */
+		PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */
+		PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */
+
+		/* I2C0 - Audio */
+		PAD_CFG_NF(GPIO_124, UP_2K, DEEP, NF1) /* LPSS_I2C0_SDA */
+		PAD_CFG_NF(GPIO_125, UP_2K, DEEP, NF1) /* LPSS_I2C0_SCL */
+
+		/* I2C1 - NFC with external pulls */
+		PAD_CFG_NF(GPIO_126, NONE, DEEP, NF1) /* LPSS_I2C1_SDA */
+		PAD_CFG_NF(GPIO_127, NONE, DEEP, NF1) /* LPSS_I2C1_SCL */
+
+		/* I2C2 - TPM  */
+		PAD_CFG_NF(GPIO_128, UP_2K, DEEP, NF1) /* LPSS_I2C2_SDA */
+		PAD_CFG_NF(GPIO_129, UP_2K, DEEP, NF1) /* LPSS_I2C2_SCL */
+
+		/* I2C3 - touch */
+		PAD_CFG_NF(GPIO_130, UP_2K, DEEP, NF1) /* LPSS_I2C3_SDA */
+		PAD_CFG_NF(GPIO_131, UP_2K, DEEP, NF1) /* LPSS_I2C3_SCL */
+
+		/* I2C4 - trackpad */
+		/* LPSS_I2C4_SDA */
+		PAD_CFG_NF_IOSSTATE(GPIO_132, UP_2K, DEEP, NF1, HIZCRX1)
+		/* LPSS_I2C4_SCL */
+		PAD_CFG_NF_IOSSTATE(GPIO_133, UP_2K, DEEP, NF1, HIZCRX1)
+
+		/* I2C5 -- pen with external pulls  */
+		PAD_CFG_NF(GPIO_134, NONE, DEEP, NF1) /* LPSS_I2C5_SDA */
+		PAD_CFG_NF(GPIO_135, NONE, DEEP, NF1) /* LPSS_I2C5_SCL */
+
+		/* I2C6-7 -- unused */
+		PAD_CFG_GPI(GPIO_136, UP_20K, DEEP)	 /* LPSS_I2C6_SDA */
+		PAD_CFG_GPI(GPIO_137, UP_20K, DEEP)	 /* LPSS_I2C6_SCL */
+		PAD_CFG_GPI(GPIO_138, UP_20K, DEEP)	 /* LPSS_I2C7_SDA */
+		PAD_CFG_GPI(GPIO_139, UP_20K, DEEP)	 /* LPSS_I2C7_SCL */
+
+		/* Audio Amp - I2S6 */
+		PAD_CFG_NF(GPIO_146, NATIVE, DEEP, NF2) /* ISH_GPIO_0 - I2S6_BCLK */
+		PAD_CFG_NF(GPIO_147, NATIVE, DEEP, NF2) /* ISH_GPIO_1 - I2S6_WS_SYNC */
+		PAD_CFG_GPI(GPIO_148, UP_20K, DEEP)	 /* ISH_GPIO_2 - unused */
+		PAD_CFG_NF(GPIO_149, NATIVE, DEEP, NF2) /* ISH_GPIO_3 - I2S6_SDO */
+
+		/* NFC Reset */
+		PAD_CFG_GPO(GPIO_150, 1, DEEP)		 /* ISH_GPIO_4 */
+
+		PAD_CFG_GPI(GPIO_151, UP_20K, DEEP)	 /* ISH_GPIO_5 - unused */
+
+		/* Touch enable */
+		PAD_CFG_GPO(GPIO_152, 1, DEEP)		 /* ISH_GPIO_6 */
+
+		PAD_CFG_GPI(GPIO_153, UP_20K, DEEP)	 /* ISH_GPIO_7 - unused */
+		PAD_CFG_GPI(GPIO_154, UP_20K, DEEP)	 /* ISH_GPIO_8 - unused */
+		PAD_CFG_GPI(GPIO_155, UP_20K, DEEP)	 /* ISH_GPIO_9 - unused */
+
+		/* PCIE_CLKREQ[0:3]_N */
+		PAD_CFG_NF(GPIO_209, NONE, DEEP, NF1)	 /* WLAN with external pull */
+		PAD_CFG_GPI(GPIO_210, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI(GPIO_211, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI(GPIO_212, UP_20K, DEEP)	 /* unused */
+
+		/* OSC_CLK_OUT_[0:4] -- unused */
+		PAD_CFG_GPI(OSC_CLK_OUT_0, UP_20K, DEEP)
+		PAD_CFG_GPI(OSC_CLK_OUT_1, UP_20K, DEEP)
+		PAD_CFG_GPI(OSC_CLK_OUT_2, UP_20K, DEEP)
+		PAD_CFG_GPI(OSC_CLK_OUT_3, UP_20K, DEEP)
+		PAD_CFG_GPI(OSC_CLK_OUT_4, UP_20K, DEEP)
+
+		/* PMU Signals */
+		PAD_CFG_GPI(PMU_AC_PRESENT, UP_20K, DEEP) /* PMU_AC_PRESENT - unused */
+		PAD_CFG_NF(PMU_BATLOW_B, UP_20K, DEEP, NF1) /* PMU_BATLOW_N */
+		PAD_CFG_NF(PMU_PLTRST_B, NONE, DEEP, NF1) /* PMU_PLTRST_N */
+		PAD_CFG_NF(PMU_PWRBTN_B, UP_20K, DEEP, NF1) /* PMU_PWRBTN_N */
+		PAD_CFG_NF(PMU_RESETBUTTON_B, NONE, DEEP, NF1) /* PMU_RSTBTN_N */
+		PAD_CFG_NF_IOSSTATE(PMU_SLP_S0_B, NONE, DEEP, NF1, IGNORE) /* PMU_SLP_S0_N */
+		PAD_CFG_NF(PMU_SLP_S3_B, NONE, DEEP, NF1) /* PMU_SLP_S3_N */
+		PAD_CFG_NF(PMU_SLP_S4_B, NONE, DEEP, NF1) /* PMU_SLP_S4_N */
+		PAD_CFG_NF(PMU_SUSCLK, NONE, DEEP, NF1) /* PMU_SUSCLK */
+		PAD_CFG_GPO(PMU_WAKE_B, 1, DEEP)	 /* EN_PP3300_EMMC */
+		PAD_CFG_NF(SUS_STAT_B, NONE, DEEP, NF1) /* SUS_STAT_N */
+		PAD_CFG_NF(SUSPWRDNACK, NONE, DEEP, NF1) /* SUSPWRDNACK */
+
+		/* DDI[0:1] SDA and SCL -- unused */
+		PAD_CFG_GPI(GPIO_187, UP_20K, DEEP)	 /* HV_DDI0_DDC_SDA */
+		PAD_CFG_GPI(GPIO_188, UP_20K, DEEP)	 /* HV_DDI0_DDC_SCL */
+		PAD_CFG_GPI(GPIO_189, UP_20K, DEEP)	 /* HV_DDI1_DDC_SDA */
+		PAD_CFG_GPI(GPIO_190, UP_20K, DEEP)	 /* HV_DDI1_DDC_SCL */
+
+		/* MIPI I2C -- unused */
+		PAD_CFG_GPI(GPIO_191, UP_20K, DEEP)	 /* MIPI_I2C_SDA */
+		PAD_CFG_GPI(GPIO_192, UP_20K, DEEP)	 /* MIPI_I2C_SCL */
+
+		/* Panel 0 control */
+		PAD_CFG_NF(GPIO_193, NATIVE, DEEP, NF1) /* PNL0_VDDEN */
+		PAD_CFG_NF(GPIO_194, NATIVE, DEEP, NF1) /* PNL0_BKLTEN */
+		PAD_CFG_NF(GPIO_195, NATIVE, DEEP, NF1) /* PNL0_BKLTCTL */
+
+		/* Panel 1 control -- unused */
+		PAD_CFG_NF(GPIO_196, NATIVE, DEEP, NF1) /* PNL1_VDDEN */
+		PAD_CFG_NF(GPIO_197, NATIVE, DEEP, NF1) /* PNL1_BKLTEN */
+		PAD_CFG_NF(GPIO_198, NATIVE, DEEP, NF1) /* PNL1_BKLTCTL */
+
+		/* Hot plug detect */
+		PAD_CFG_NF(GPIO_199, UP_20K, DEEP, NF2) /* HV_DDI1_HPD */
+		PAD_CFG_NF(GPIO_200, UP_20K, DEEP, NF2) /* HV_DDI0_HPD */
+
+		/* MDSI signals -- unused */
+		PAD_CFG_GPI(GPIO_201, UP_20K, DEEP)	 /* MDSI_A_TE */
+		PAD_CFG_GPI(GPIO_202, UP_20K, DEEP)	 /* MDSI_A_TE */
+
+		/* USB overcurrent pins */
+		PAD_CFG_NF(GPIO_203, UP_20K, DEEP, NF1) /* USB_OC0_N */
+		PAD_CFG_NF(GPIO_204, UP_20K, DEEP, NF1) /* USB_OC1_N */
+
+		/* PMC SPI -- almost entirely unused */
+		PAD_CFG_GPI(PMC_SPI_FS0, UP_20K, DEEP)
+		PAD_CFG_NF(PMC_SPI_FS1, UP_20K, DEEP, NF2) /* HV_DDI2_HPD -- EDP HPD */
+		PAD_CFG_GPI(PMC_SPI_FS2, UP_20K, DEEP)
+		PAD_CFG_GPI(PMC_SPI_RXD, UP_20K, DEEP)
+		PAD_CFG_GPI(PMC_SPI_TXD, UP_20K, DEEP)
+		PAD_CFG_GPI(PMC_SPI_CLK, UP_20K, DEEP)
+
+		/* PMIC Signals Unused signals related to an old PMIC interface */
+		PAD_CFG_NF_IOSSTATE(PMIC_RESET_B, NATIVE, DEEP, NF1, IGNORE) /* PMIC_RESET_B */
+		PAD_CFG_GPI(GPIO_213, NONE, DEEP)	 /* unused external pull */
+		PAD_CFG_GPI(GPIO_214, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI(GPIO_215, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_NF(PMIC_THERMTRIP_B, UP_20K, DEEP, NF1) /* THERMTRIP_N */
+		PAD_CFG_GPI(PMIC_STDBY, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_NF(PROCHOT_B, UP_20K, DEEP, NF1) /* PROCHOT_N */
+		PAD_CFG_NF(PMIC_I2C_SCL, UP_1K, DEEP, NF1) /* PMIC_I2C_SCL */
+		PAD_CFG_NF(PMIC_I2C_SDA, UP_1K, DEEP, NF1) /* PMIC_I2C_SDA */
+
+		/* I2S1 -- largely unused */
+		PAD_CFG_GPI(GPIO_74, UP_20K, DEEP)	/* I2S1_MCLK */
+		PAD_CFG_GPI(GPIO_75, UP_20K, DEEP)	/* I2S1_BCLK -- PCH_WP */
+		PAD_CFG_GPO(GPIO_76, 0, DEEP)		/* I2S1_WS_SYNC -- SPK_PA_EN */
+		PAD_CFG_GPI(GPIO_77, UP_20K, DEEP)	/* I2S1_SDI */
+		PAD_CFG_GPO(GPIO_78, 1, DEEP)		/* I2S1_SDO -- EN_PP3300_DX_LTE_SOC */
+
+		/* DMIC or I2S4 */
+		/* AVS_DMIC_CLK_A1 */
+		PAD_CFG_NF_IOSSTATE(GPIO_79, NATIVE, DEEP, NF1, IGNORE)
+		PAD_CFG_NF(GPIO_80, NATIVE, DEEP, NF1) /* AVS_DMIC_CLK_B1 */
+		PAD_CFG_NF(GPIO_81, NATIVE, DEEP, NF1)	/* AVS_DMIC_DATA_1 */
+		PAD_CFG_GPI(GPIO_82, DN_20K, DEEP)	 /* unused -- strap */
+		PAD_CFG_NF(GPIO_83, NATIVE, DEEP, NF1) /* AVS_DMIC_DATA_2 */
+
+		/* I2S2 -- Headset amp */
+		PAD_CFG_NF(GPIO_84, NATIVE, DEEP, NF1)	 /* AVS_I2S2_MCLK */
+		PAD_CFG_NF(GPIO_85, NATIVE, DEEP, NF1)	 /* AVS_I2S2_BCLK */
+		PAD_CFG_NF(GPIO_86, NATIVE, DEEP, NF1)	 /* AVS_I2S2_SW_SYNC */
+		PAD_CFG_NF(GPIO_87, NATIVE, DEEP, NF1)	 /* AVS_I2S2_SDI */
+		PAD_CFG_NF(GPIO_88, NATIVE, DEEP, NF1)	 /* AVS_I2S2_SDO */
+
+		/* I2S3 -- largely unused */
+		PAD_CFG_GPI(GPIO_89, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI(GPIO_90, UP_20K, DEEP)	 /* GPS_HOST_WAKE */
+		PAD_CFG_GPO(GPIO_91, 1, DEEP)		 /* GPS_EN */
+		PAD_CFG_GPI(GPIO_92, DN_20K, DEEP)	 /* unused -- strap */
+
+		/* Fast SPI */
+		PAD_CFG_NF_IOSSTATE(GPIO_97, NATIVE, DEEP, NF1, IGNORE)	/* FST_SPI_CS0_B */
+		PAD_CFG_GPI(GPIO_98, UP_20K, DEEP)				/* FST_SPI_CS1_B -- unused */
+		PAD_CFG_NF_IOSSTATE(GPIO_99, NATIVE, DEEP, NF1, IGNORE)	/* FST_SPI_MOSI_IO0 */
+		PAD_CFG_NF_IOSSTATE(GPIO_100, NATIVE, DEEP, NF1, IGNORE)	/* FST_SPI_MISO_IO1 */
+		PAD_CFG_GPI(GPIO_101, NONE, DEEP)				/* FST_IO2 -- MEM_CONFIG0 */
+		PAD_CFG_GPI(GPIO_102, NONE, DEEP)				/* FST_IO3 -- MEM_CONFIG1 */
+		PAD_CFG_NF_IOSSTATE(GPIO_103, NATIVE, DEEP, NF1, IGNORE)	/* FST_SPI_CLK */
+		PAD_CFG_NF_IOSSTATE(FST_SPI_CLK_FB, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CLK_FB */
+		PAD_CFG_NF_IOSSTATE(GPIO_106, NATIVE, DEEP, NF3, IGNORE)	/* FST_SPI_CS2_N */
+
+		/* SIO_SPI_0 - Used for FP */
+		PAD_CFG_NF(GPIO_104, NATIVE, DEEP, NF1)			/* SIO_SPI_0_CLK */
+		PAD_CFG_NF(GPIO_105, NATIVE, DEEP, NF1)			/* SIO_SPI_0_FS0 */
+		PAD_CFG_NF(GPIO_109, NATIVE, DEEP, NF1)			/* SIO_SPI_0_RXD */
+		PAD_CFG_NF(GPIO_110, NATIVE, DEEP, NF1)			/* SIO_SPI_0_TXD */
+
+		/* SIO_SPI_1 -- largely unused */
+		PAD_CFG_GPI(GPIO_111, UP_20K, DEEP)	 /* SIO_SPI_1_CLK */
+		PAD_CFG_GPI(GPIO_112, UP_20K, DEEP)	 /* SIO_SPI_1_FS0 */
+		PAD_CFG_GPI(GPIO_113, UP_20K, DEEP)	 /* SIO_SPI_1_FS1 */
+		/* Headset interrupt */
+		PAD_CFG_GPI_APIC_LOW(GPIO_116, NONE, DEEP) /* SIO_SPI_1_RXD */
+		PAD_CFG_GPI(GPIO_117, UP_20K, DEEP)	 /* SIO_SPI_1_TXD */
+
+		/* SIO_SPI_2 -- unused */
+		PAD_CFG_GPI(GPIO_118, UP_20K, DEEP)	 /* SIO_SPI_2_CLK */
+		PAD_CFG_GPI(GPIO_119, UP_20K, DEEP)	 /* SIO_SPI_2_FS0 */
+		PAD_CFG_GPI(GPIO_120, UP_20K, DEEP)	 /* SIO_SPI_2_FS1 */
+		PAD_CFG_GPI(GPIO_121, UP_20K, DEEP)	 /* SIO_SPI_2_FS2 */
+		/* WLAN_PE_RST - default to deasserted */
+		PAD_CFG_GPO(GPIO_122, 0, DEEP)		 /* SIO_SPI_2_RXD */
+		PAD_CFG_GPI(GPIO_123, UP_20K, DEEP)	 /* SIO_SPI_2_TXD */
+
+		/* Debug tracing */
+		PAD_CFG_GPI(GPIO_0, UP_20K, DEEP)
+		PAD_CFG_GPI(GPIO_1, UP_20K, DEEP)
+		PAD_CFG_GPI(GPIO_2, UP_20K, DEEP)
+		PAD_CFG_GPI_SCI_HIGH(GPIO_3, DN_20K, DEEP, LEVEL)	 /* FP_INT */
+		PAD_CFG_GPI(GPIO_4, UP_20K, DEEP)
+		PAD_CFG_GPI(GPIO_5, UP_20K, DEEP)
+		PAD_CFG_GPI(GPIO_6, UP_20K, DEEP)
+		PAD_CFG_GPI(GPIO_7, UP_20K, DEEP)
+		PAD_CFG_GPI(GPIO_8, UP_20K, DEEP)
+
+		PAD_CFG_GPI_APIC_LOW(GPIO_9, NONE, DEEP) /* dTPM IRQ */
+		PAD_CFG_GPI(GPIO_10, DN_20K, DEEP)	 /* Board phase enforcement */
+		PAD_CFG_GPI_SCI_LOW(GPIO_11, NONE, DEEP, EDGE_SINGLE) /* EC SCI  */
+		PAD_CFG_GPI(GPIO_12, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI_APIC_LOW(GPIO_13, NONE, DEEP) /* PEN_INT_ODL */
+		PAD_CFG_GPI_APIC_HIGH(GPIO_14, DN_20K, DEEP) /* FP_INT */
+		PAD_CFG_GPI_SCI_LOW(GPIO_15, NONE, DEEP, EDGE_SINGLE)	 /* TRACKPAD_INT_1V8_ODL */
+		PAD_CFG_GPI(GPIO_16, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI(GPIO_17, UP_20K, DEEP)	 /* 1 vs 4 DMIC config */
+		PAD_CFG_GPI_APIC_LOW(GPIO_18, NONE, DEEP) /* Trackpad IRQ */
+		PAD_CFG_GPI(GPIO_19, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI_APIC_LOW(GPIO_20, UP_20K, DEEP) /* NFC IRQ */
+		PAD_CFG_GPI_APIC_LOW(GPIO_21, NONE, DEEP) /* Touch IRQ */
+		PAD_CFG_GPI_SCI_LOW(GPIO_22, NONE, DEEP, EDGE_SINGLE) /* EC wake */
+		PAD_CFG_GPI(GPIO_23, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI(GPIO_24, NONE, DEEP)	 /* PEN_PDCT_ODL */
+		PAD_CFG_GPI(GPIO_25, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI(GPIO_26, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI(GPIO_27, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPI_APIC_LOW(GPIO_28, NONE, DEEP) /* TPM IRQ */
+		PAD_CFG_GPO(GPIO_29, 1, DEEP)		 /* FP reset */
+		PAD_CFG_GPI_APIC_LOW(GPIO_30, NONE, DEEP) /* KB IRQ */
+		PAD_CFG_GPO(GPIO_31, 0, DEEP)		 /* NFC FW DL */
+		PAD_CFG_NF(GPIO_32, NONE, DEEP, NF5)	 /* SUS_CLK2 */
+		PAD_CFG_GPI_APIC_LOW(GPIO_33, NONE, DEEP) /* PMIC IRQ */
+		PAD_CFG_GPI(GPIO_34, UP_20K, DEEP)	 /* unused */
+		PAD_CFG_GPO(GPIO_35, 0, DEEP)		 /* PEN_RESET - active high */
+		PAD_CFG_GPO(GPIO_36, 0, DEEP)		 /* touch reset */
+		PAD_CFG_GPI(GPIO_37, UP_20K, DEEP)	 /* unused */
+
+		/* LPSS_UART[0:2] */
+		PAD_CFG_GPI(GPIO_38, NONE, DEEP)	 /* LPSS_UART0_RXD - MEM_CONFIG2*/
+		/* Next 2 are straps */
+		PAD_CFG_GPI(GPIO_39, DN_20K, DEEP)	 /* LPSS_UART0_TXD - unused */
+		PAD_CFG_GPI(GPIO_40, DN_20K, DEEP)	 /* LPSS_UART0_RTS - unused */
+		PAD_CFG_GPI(GPIO_41, NONE, DEEP)	 /* LPSS_UART0_CTS - EC_IN_RW */
+		PAD_CFG_NF(GPIO_42, NATIVE, DEEP, NF1)	 /* LPSS_UART1_RXD */
+		PAD_CFG_NF(GPIO_43, NATIVE, DEEP, NF1)	 /* LPSS_UART1_TXD */
+		PAD_CFG_GPO(GPIO_44, 1, DEEP)	 /* GPS_RST_ODL */
+		PAD_CFG_GPI(GPIO_45, NONE, DEEP)	 /* LPSS_UART1_CTS - MEM_CONFIG3 */
+		PAD_CFG_NF(GPIO_46, NATIVE, DEEP, NF1)	 /* LPSS_UART2_RXD */
+		PAD_CFG_NF_IOSSTATE(GPIO_47, NATIVE, DEEP, NF1, TX1_RX_DCR_X0) /* UART2 TX */
+		PAD_CFG_GPI(GPIO_48, UP_20K, DEEP)	 /* LPSS_UART2_RTS - unused */
+		PAD_CFG_GPI_SMI_LOW(GPIO_49, NONE, DEEP, EDGE_SINGLE) /* LPSS_UART2_CTS - EC_SMI_L */
+
+		/* Camera interface -- completely unused */
+		PAD_CFG_GPI(GPIO_62, UP_20K, DEEP)	 /* GP_CAMERASB00 */
+		PAD_CFG_GPI(GPIO_63, UP_20K, DEEP)	 /* GP_CAMERASB01 */
+		PAD_CFG_GPI(GPIO_64, UP_20K, DEEP)	 /* GP_CAMERASB02 */
+		PAD_CFG_GPI(GPIO_65, UP_20K, DEEP)	 /* GP_CAMERASB03 */
+		PAD_CFG_GPI(GPIO_66, UP_20K, DEEP)	 /* GP_CAMERASB04 */
+		PAD_CFG_GPI(GPIO_67, UP_20K, DEEP)	 /* GP_CAMERASB05 */
+		PAD_CFG_GPI(GPIO_68, UP_20K, DEEP)	 /* GP_CAMERASB06 */
+		PAD_CFG_GPI(GPIO_69, UP_20K, DEEP)	 /* GP_CAMERASB07 */
+		PAD_CFG_GPI(GPIO_70, UP_20K, DEEP)	 /* GP_CAMERASB08 */
+		PAD_CFG_GPI(GPIO_71, UP_20K, DEEP)	 /* GP_CAMERASB09 */
+		PAD_CFG_GPI(GPIO_72, UP_20K, DEEP)	 /* GP_CAMERASB10 */
+		PAD_CFG_GPI(GPIO_73, UP_20K, DEEP)	 /* GP_CAMERASB11 */
+	>;
+};
diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi
index 0e87b88..f0f8c71 100644
--- a/arch/x86/dts/u-boot.dtsi
+++ b/arch/x86/dts/u-boot.dtsi
@@ -37,62 +37,110 @@
 	};
 #endif
 #ifdef CONFIG_TPL
+#ifdef CONFIG_HAVE_MICROCODE
 	u-boot-tpl-with-ucode-ptr {
 		offset = <CONFIG_TPL_TEXT_BASE>;
 	};
 	u-boot-tpl-dtb {
 	};
-	u-boot-spl {
-		offset = <CONFIG_SPL_TEXT_BASE>;
-	};
-	u-boot-spl-dtb {
+#endif
+	spl {
+		type = "section";
+		offset = <CONFIG_X86_OFFSET_SPL>;
+		u-boot-spl {
+		};
+		u-boot-spl-dtb {
+		};
 	};
 	u-boot {
-		offset = <CONFIG_SYS_TEXT_BASE>;
+		type = "section";
+		offset = <CONFIG_X86_OFFSET_U_BOOT>;
+		u-boot-nodtb {
+		};
+		u-boot-dtb {
+		};
 	};
 #elif defined(CONFIG_SPL)
 	u-boot-spl-with-ucode-ptr {
-		offset = <CONFIG_SPL_TEXT_BASE>;
+		offset = <CONFIG_X86_OFFSET_SPL>;
 	};
 	u-boot-dtb-with-ucode2 {
 		type = "u-boot-dtb-with-ucode";
 	};
 	u-boot {
-		/*
-		 * TODO(sjg@chromium.org):
-		 * Normally we use CONFIG_SYS_TEXT_BASE as the flash offset. But
-		 * for boards with textbase in SDRAM we cannot do this. Just use
-		 * an assumed-valid value (1MB before the end of flash) here so
-		 * that we can actually build an image for coreboot, etc.
-		 * We need a better solution, perhaps a separate Kconfig.
-		 */
-#if CONFIG_SYS_TEXT_BASE == 0x1110000
-		offset = <0xfff00000>;
+		offset = <CONFIG_X86_OFFSET_U_BOOT>;
+	};
 #else
+# ifdef CONFIG_SPL
+	u-boot {
 		offset = <CONFIG_SYS_TEXT_BASE>;
-#endif
 	};
-#else
+# else
+	/* If there is no SPL then we need to put microcode in U-Boot */
 	u-boot-with-ucode-ptr {
-		offset = <CONFIG_SYS_TEXT_BASE>;
+		offset = <CONFIG_X86_OFFSET_U_BOOT>;
 	};
+# endif
 #endif
+#ifdef CONFIG_HAVE_MICROCODE
 	u-boot-dtb-with-ucode {
 	};
 	u-boot-ucode {
 		align = <16>;
 	};
+#else
+	u-boot-dtb {
+	};
+#endif
+#ifdef CONFIG_HAVE_X86_FIT
+	intel-fit {
+	};
+	intel-fit-ptr {
+	};
+#endif
 #ifdef CONFIG_HAVE_MRC
 	intel-mrc {
 		offset = <CONFIG_X86_MRC_ADDR>;
 	};
 #endif
-#ifdef CONFIG_HAVE_FSP
+#ifdef CONFIG_FSP_VERSION1
 	intel-fsp {
 		filename = CONFIG_FSP_FILE;
 		offset = <CONFIG_FSP_ADDR>;
 	};
 #endif
+#ifdef CONFIG_FSP_VERSION2
+	intel-descriptor {
+		filename = CONFIG_FLASH_DESCRIPTOR_FILE;
+	};
+	intel-ifwi {
+		filename = CONFIG_IFWI_INPUT_FILE;
+		convert-fit;
+
+		section {
+			size = <0x8000>;
+			ifwi-replace;
+			ifwi-subpart = "IBBP";
+			ifwi-entry = "IBBL";
+			u-boot-tpl {
+			};
+			x86-start16-tpl {
+				offset = <0x7800>;
+			};
+			x86-reset16-tpl {
+				offset = <0x7ff0>;
+			};
+		};
+	};
+	intel-fsp-m {
+		filename = CONFIG_FSP_FILE_M;
+	};
+	intel-fsp-s {
+		filename = CONFIG_FSP_FILE_S;
+	};
+#endif
+	fdtmap {
+	};
 #ifdef CONFIG_HAVE_CMC
 	intel-cmc {
 		filename = CONFIG_CMC_FILE;
@@ -138,5 +186,8 @@
 		offset = <CONFIG_RESET_VEC_LOC>;
 	};
 #endif
+	image-header {
+		location = "end";
+	};
 };
 #endif
diff --git a/arch/x86/include/asm/arch-apollolake/cpu.h b/arch/x86/include/asm/arch-apollolake/cpu.h
new file mode 100644
index 0000000..5e906c5
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/cpu.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef _ASM_ARCH_CPU_H
+#define _ASM_ARCH_CPU_H
+
+/* Common Timer Copy (CTC) frequency - 19.2MHz */
+#define CTC_FREQ		19200000
+
+#define MAX_PCIE_PORTS		6
+#define CLKREQ_DISABLED		0xf
+
+#ifndef __ASSEMBLY__
+/* Flush L1D to L2 */
+void cpu_flush_l1d_to_l2(void);
+#endif
+
+#endif /* _ASM_ARCH_CPU_H */
diff --git a/arch/x86/include/asm/arch-apollolake/fsp/fsp_configs.h b/arch/x86/include/asm/arch-apollolake/fsp/fsp_configs.h
new file mode 100644
index 0000000..9185d94
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/fsp/fsp_configs.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: Intel */
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef __FSP_CONFIGS_H__
+#define __FSP_CONFIGS_H__
+
+#define FSPT_UPD_SIGNATURE	0x545F4450554C5041	/* 'APLUPD_T' */
+#define FSPM_UPD_SIGNATURE	0x4D5F4450554C5041	/* 'APLUPD_M' */
+#define FSPS_UPD_SIGNATURE	0x535F4450554C5041	/* 'APLUPD_S' */
+#define VBT_SIGNATURE		0x54425624
+
+#endif
diff --git a/arch/x86/include/asm/arch-apollolake/fsp/fsp_m_upd.h b/arch/x86/include/asm/arch-apollolake/fsp/fsp_m_upd.h
new file mode 100644
index 0000000..93bee5b
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/fsp/fsp_m_upd.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: Intel */
+/*
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef	__ASM_ARCH_FSP_M_UDP_H
+#define	__ASM_ARCH_FSP_M_UDP_H
+
+#include <asm/fsp2/fsp_api.h>
+
+#define FSP_DRAM_CHANNELS	4
+
+struct __packed fspm_arch_upd {
+	u8	revision;
+	u8	reserved[3];
+	void	*nvs_buffer_ptr;
+	void	*stack_base;
+	u32	stack_size;
+	u32	boot_loader_tolum_size;
+	u32	boot_mode;
+	u8	reserved1[8];
+};
+
+struct __packed fsp_ram_channel {
+	u8	rank_enable;
+	u8	device_width;
+	u8	dram_density;
+	u8	option;
+	u8	odt_config;
+	u8	tristate_clk1;
+	u8	mode2_n;
+	u8	odt_levels;
+};
+
+struct __packed fsp_m_config {
+	u32	serial_debug_port_address;
+	u8	serial_debug_port_type;
+	u8	serial_debug_port_device;
+	u8	serial_debug_port_stride_size;
+	u8	mrc_fast_boot;
+	u8	igd;
+	u8	igd_dvmt50_pre_alloc;
+	u8	igd_aperture_size;
+	u8	gtt_size;
+	u8	primary_video_adaptor;
+	u8	package;
+	u8	profile;
+	u8	memory_down;
+
+	u8	ddr3_l_page_size;
+	u8	ddr3_lasr;
+	u8	scrambler_support;
+	u8	interleaved_mode;
+	u16	channel_hash_mask;
+	u16	slice_hash_mask;
+	u8	channels_slices_enable;
+	u8	min_ref_rate2x_enable;
+	u8	dual_rank_support_enable;
+	u8	rmt_mode;
+	u16	memory_size_limit;
+	u16	low_memory_max_value;
+
+	u16	high_memory_max_value;
+	u8	disable_fast_boot;
+	u8	dimm0_spd_address;
+	u8	dimm1_spd_address;
+	struct fsp_ram_channel chan[FSP_DRAM_CHANNELS];
+	u8	rmt_check_run;
+	u16	rmt_margin_check_scale_high_threshold;
+	u8	ch_bit_swizzling[FSP_DRAM_CHANNELS][32];
+	u32	msg_level_mask;
+	u8	unused_upd_space0[4];
+
+	u8	pre_mem_gpio_table_pin_num[4];
+	u32	pre_mem_gpio_table_ptr;
+	u8	pre_mem_gpio_table_entry_num;
+	u8	enhance_port8xh_decoding;
+	u8	spd_write_enable;
+	u8	mrc_data_saving;
+	u32	oem_loading_base;
+
+	u8	oem_file_name[16];
+
+	void	*mrc_boot_data_ptr;
+	u8	e_mmc_trace_len;
+	u8	skip_cse_rbp;
+	u8	npk_en;
+	u8	fw_trace_en;
+	u8	fw_trace_destination;
+	u8	recover_dump;
+	u8	msc0_wrap;
+	u8	msc1_wrap;
+	u32	msc0_size;
+
+	u32	msc1_size;
+	u8	pti_mode;
+	u8	pti_training;
+	u8	pti_speed;
+	u8	punit_mlvl;
+
+	u8	pmc_mlvl;
+	u8	sw_trace_en;
+	u8	periodic_retraining_disable;
+	u8	enable_reset_system;
+
+	u8	enable_s3_heci2;
+	u8	unused_upd_space1[3];
+
+	void	*variable_nvs_buffer_ptr;
+	u8	reserved_fspm_upd[12];
+};
+
+/** FSP-M UPD Configuration */
+struct __packed fspm_upd {
+	struct fsp_upd_header header;
+	struct fspm_arch_upd arch;
+	struct fsp_m_config config;
+	u8 unused_upd_space2[158];
+	u16 upd_terminator;
+};
+
+#endif
diff --git a/arch/x86/include/asm/arch-apollolake/fsp/fsp_s_upd.h b/arch/x86/include/asm/arch-apollolake/fsp/fsp_s_upd.h
new file mode 100644
index 0000000..4a868e8
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/fsp/fsp_s_upd.h
@@ -0,0 +1,292 @@
+/* SPDX-License-Identifier: Intel */
+/*
+ * Copyright (c) 2016, Intel Corporation. All rights reserved.
+ * Copyright 2019 Google LLC
+ */
+#ifndef __ASM_ARCH_FSP_S_UDP_H
+#define __ASM_ARCH_FSP_S_UDP_H
+
+#include <asm/fsp2/fsp_api.h>
+
+struct __packed fsp_s_config {
+	u8	active_processor_cores;
+	u8	disable_core1;
+	u8	disable_core2;
+	u8	disable_core3;
+	u8	vmx_enable;
+	u8	proc_trace_mem_size;
+	u8	proc_trace_enable;
+	u8	eist;
+	u8	boot_p_state;
+	u8	enable_cx;
+	u8	c1e;
+	u8	bi_proc_hot;
+	u8	pkg_c_state_limit;
+	u8	c_state_auto_demotion;
+	u8	c_state_un_demotion;
+	u8	max_core_c_state;
+	u8	pkg_c_state_demotion;
+	u8	pkg_c_state_un_demotion;
+	u8	turbo_mode;
+	u8	hda_verb_table_entry_num;
+	u32	hda_verb_table_ptr;
+	u8	p2sb_unhide;
+	u8	ipu_en;
+	u8	ipu_acpi_mode;
+	u8	force_wake;
+	u32	gtt_mm_adr;
+	u32	gm_adr;
+	u8	pavp_lock;
+	u8	graphics_freq_modify;
+	u8	graphics_freq_req;
+	u8	graphics_video_freq;
+	u8	pm_lock;
+	u8	dop_clock_gating;
+	u8	unsolicited_attack_override;
+	u8	wopcm_support;
+	u8	wopcm_size;
+	u8	power_gating;
+	u8	unit_level_clock_gating;
+	u8	fast_boot;
+	u8	dyn_sr;
+	u8	sa_ipu_enable;
+	u8	pm_support;
+	u8	enable_render_standby;
+	u32	logo_size;
+	u32	logo_ptr;
+	u32	graphics_config_ptr;
+	u8	pavp_enable;
+	u8	pavp_pr3;
+	u8	cd_clock;
+	u8	pei_graphics_peim_init;
+	u8	write_protection_enable[5];
+	u8	read_protection_enable[5];
+	u16	protected_range_limit[5];
+	u16	protected_range_base[5];
+	u8	gmm;
+	u8	clk_gating_pgcb_clk_trunk;
+	u8	clk_gating_sb;
+	u8	clk_gating_sb_clk_trunk;
+	u8	clk_gating_sb_clk_partition;
+	u8	clk_gating_core;
+	u8	clk_gating_dma;
+	u8	clk_gating_reg_access;
+	u8	clk_gating_host;
+	u8	clk_gating_partition;
+	u8	clk_gating_trunk;
+	u8	hda_enable;
+	u8	dsp_enable;
+	u8	pme;
+	u8	hd_audio_io_buffer_ownership;
+	u8	hd_audio_io_buffer_voltage;
+	u8	hd_audio_vc_type;
+	u8	hd_audio_link_frequency;
+	u8	hd_audio_i_disp_link_frequency;
+	u8	hd_audio_i_disp_link_tmode;
+	u8	dsp_endpoint_dmic;
+	u8	dsp_endpoint_bluetooth;
+	u8	dsp_endpoint_i2s_skp;
+	u8	dsp_endpoint_i2s_hp;
+	u8	audio_ctl_pwr_gate;
+	u8	audio_dsp_pwr_gate;
+	u8	mmt;
+	u8	hmt;
+	u8	hd_audio_pwr_gate;
+	u8	hd_audio_clk_gate;
+	u32	dsp_feature_mask;
+	u32	dsp_pp_module_mask;
+	u8	bios_cfg_lock_down;
+	u8	hpet;
+	u8	hpet_bdf_valid;
+	u8	hpet_bus_number;
+	u8	hpet_device_number;
+	u8	hpet_function_number;
+	u8	io_apic_bdf_valid;
+	u8	io_apic_bus_number;
+	u8	io_apic_device_number;
+	u8	io_apic_function_number;
+	u8	io_apic_entry24_119;
+	u8	io_apic_id;
+	u8	io_apic_range_select;
+	u8	ish_enable;
+	u8	bios_interface;
+	u8	bios_lock;
+	u8	spi_eiss;
+	u8	bios_lock_sw_smi_number;
+	u8	lpss_s0ix_enable;
+	u8	unused_upd_space0[1];
+	u8	i2c_clk_gate_cfg[8];
+	u8	hsuart_clk_gate_cfg[4];
+	u8	spi_clk_gate_cfg[3];
+	u8	i2c0_enable;
+	u8	i2c1_enable;
+	u8	i2c2_enable;
+	u8	i2c3_enable;
+	u8	i2c4_enable;
+	u8	i2c5_enable;
+	u8	i2c6_enable;
+	u8	i2c7_enable;
+	u8	hsuart0_enable;
+	u8	hsuart1_enable;
+	u8	hsuart2_enable;
+	u8	hsuart3_enable;
+	u8	spi0_enable;
+	u8	spi1_enable;
+	u8	spi2_enable;
+	u8	os_dbg_enable;
+	u8	dci_en;
+	u32	uart2_kernel_debug_base_address;
+	u8	pcie_clock_gating_disabled;
+	u8	pcie_root_port8xh_decode;
+	u8	pcie8xh_decode_port_index;
+	u8	pcie_root_port_peer_memory_write_enable;
+	u8	pcie_aspm_sw_smi_number;
+	u8	unused_upd_space1[1];
+	u8	pcie_root_port_en[6];
+	u8	pcie_rp_hide[6];
+	u8	pcie_rp_slot_implemented[6];
+	u8	pcie_rp_hot_plug[6];
+	u8	pcie_rp_pm_sci[6];
+	u8	pcie_rp_ext_sync[6];
+	u8	pcie_rp_transmitter_half_swing[6];
+	u8	pcie_rp_acs_enabled[6];
+	u8	pcie_rp_clk_req_supported[6];
+	u8	pcie_rp_clk_req_number[6];
+	u8	pcie_rp_clk_req_detect[6];
+	u8	advanced_error_reporting[6];
+	u8	pme_interrupt[6];
+	u8	unsupported_request_report[6];
+	u8	fatal_error_report[6];
+	u8	no_fatal_error_report[6];
+	u8	correctable_error_report[6];
+	u8	system_error_on_fatal_error[6];
+	u8	system_error_on_non_fatal_error[6];
+	u8	system_error_on_correctable_error[6];
+	u8	pcie_rp_speed[6];
+	u8	physical_slot_number[6];
+	u8	pcie_rp_completion_timeout[6];
+	u8	ptm_enable[6];
+	u8	pcie_rp_aspm[6];
+	u8	pcie_rp_l1_substates[6];
+	u8	pcie_rp_ltr_enable[6];
+	u8	pcie_rp_ltr_config_lock[6];
+	u8	pme_b0_s5_dis;
+	u8	pci_clock_run;
+	u8	timer8254_clk_setting;
+	u8	enable_sata;
+	u8	sata_mode;
+	u8	sata_salp_support;
+	u8	sata_pwr_opt_enable;
+	u8	e_sata_speed_limit;
+	u8	speed_limit;
+	u8	unused_upd_space2[1];
+	u8	sata_ports_enable[2];
+	u8	sata_ports_dev_slp[2];
+	u8	sata_ports_hot_plug[2];
+	u8	sata_ports_interlock_sw[2];
+	u8	sata_ports_external[2];
+	u8	sata_ports_spin_up[2];
+	u8	sata_ports_solid_state_drive[2];
+	u8	sata_ports_enable_dito_config[2];
+	u8	sata_ports_dm_val[2];
+	u8	unused_upd_space3[2];
+	u16	sata_ports_dito_val[2];
+	u16	sub_system_vendor_id;
+	u16	sub_system_id;
+	u8	crid_settings;
+	u8	reset_select;
+	u8	sdcard_enabled;
+	u8	e_mmc_enabled;
+	u8	e_mmc_host_max_speed;
+	u8	ufs_enabled;
+	u8	sdio_enabled;
+	u8	gpp_lock;
+	u8	sirq_enable;
+	u8	sirq_mode;
+	u8	start_frame_pulse;
+	u8	smbus_enable;
+	u8	arp_enable;
+	u8	unused_upd_space4;
+	u16	num_rsvd_smbus_addresses;
+	u8	rsvd_smbus_address_table[128];
+	u8	disable_compliance_mode;
+	u8	usb_per_port_ctl;
+	u8	usb30_mode;
+	u8	unused_upd_space5[1];
+	u8	port_usb20_enable[8];
+	u8	port_us20b_over_current_pin[8];
+	u8	usb_otg;
+	u8	hsic_support_enable;
+	u8	port_usb30_enable[6];
+	u8	port_us30b_over_current_pin[6];
+	u8	ssic_port_enable[2];
+	u16	dlane_pwr_gating;
+	u8	vtd_enable;
+	u8	lock_down_global_smi;
+	u16	reset_wait_timer;
+	u8	rtc_lock;
+	u8	sata_test_mode;
+	u8	ssic_rate[2];
+	u16	dynamic_power_gating;
+	u16	pcie_rp_ltr_max_snoop_latency[6];
+	u8	pcie_rp_snoop_latency_override_mode[6];
+	u8	unused_upd_space6[2];
+	u16	pcie_rp_snoop_latency_override_value[6];
+	u8	pcie_rp_snoop_latency_override_multiplier[6];
+	u8	skip_mp_init;
+	u8	dci_auto_detect;
+	u16	pcie_rp_ltr_max_non_snoop_latency[6];
+	u8	pcie_rp_non_snoop_latency_override_mode[6];
+	u8	tco_timer_halt_lock;
+	u8	pwr_btn_override_period;
+	u16	pcie_rp_non_snoop_latency_override_value[6];
+	u8	pcie_rp_non_snoop_latency_override_multiplier[6];
+	u8	pcie_rp_slot_power_limit_scale[6];
+	u8	pcie_rp_slot_power_limit_value[6];
+	u8	disable_native_power_button;
+	u8	power_butter_debounce_mode;
+	u32	sdio_tx_cmd_cntl;
+	u32	sdio_tx_data_cntl1;
+	u32	sdio_tx_data_cntl2;
+	u32	sdio_rx_cmd_data_cntl1;
+	u32	sdio_rx_cmd_data_cntl2;
+	u32	sdcard_tx_cmd_cntl;
+	u32	sdcard_tx_data_cntl1;
+	u32	sdcard_tx_data_cntl2;
+	u32	sdcard_rx_cmd_data_cntl1;
+	u32	sdcard_rx_strobe_cntl;
+	u32	sdcard_rx_cmd_data_cntl2;
+	u32	emmc_tx_cmd_cntl;
+	u32	emmc_tx_data_cntl1;
+	u32	emmc_tx_data_cntl2;
+	u32	emmc_rx_cmd_data_cntl1;
+	u32	emmc_rx_strobe_cntl;
+	u32	emmc_rx_cmd_data_cntl2;
+	u32	emmc_master_sw_cntl;
+	u8	pcie_rp_selectable_deemphasis[6];
+	u8	monitor_mwait_enable;
+	u8	hd_audio_dsp_uaa_compliance;
+	u32	ipc[4];
+	u8	sata_ports_disable_dynamic_pg[2];
+	u8	init_s3_cpu;
+	u8	skip_punit_init;
+	u8	unused_upd_space7[4];
+	u8	port_usb20_per_port_tx_pe_half[8];
+	u8	port_usb20_per_port_pe_txi_set[8];
+	u8	port_usb20_per_port_txi_set[8];
+	u8	port_usb20_hs_skew_sel[8];
+	u8	port_usb20_i_usb_tx_emphasis_en[8];
+	u8	port_usb20_per_port_rxi_set[8];
+	u8	port_usb20_hs_npre_drv_sel[8];
+	u8	reserved_fsps_upd[16];
+};
+
+/** struct fsps_upd - FSP-S Configuration */
+struct __packed fsps_upd {
+	struct fsp_upd_header header;
+	struct fsp_s_config config;
+	u8 unused_upd_space2[46];
+	u16 upd_terminator;
+};
+
+#endif
diff --git a/arch/x86/include/asm/arch-apollolake/fsp/fsp_vpd.h b/arch/x86/include/asm/arch-apollolake/fsp/fsp_vpd.h
new file mode 100644
index 0000000..b14f28b
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/fsp/fsp_vpd.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: Intel */
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef __FSP_VPD_H
+#define __FSP_VPD_H
+
+/* Nothing to declare here for FSP2 */
+
+#endif
diff --git a/arch/x86/include/asm/arch-apollolake/gpio.h b/arch/x86/include/asm/arch-apollolake/gpio.h
new file mode 100644
index 0000000..10879c1
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/gpio.h
@@ -0,0 +1,485 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Definitions for the GPIO subsystem on Apollolake
+ *
+ * Copyright (C) 2015 - 2017 Intel Corp.
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ *
+ * Placed in a separate file since some of these definitions can be used from
+ * assembly code
+ *
+ * Taken from gpio_apl.h in coreboot
+ */
+
+#ifndef _ASM_ARCH_GPIO_H_
+#define _ASM_ARCH_GPIO_H_
+
+/* Port ids */
+#define PID_GPIO_SW	0xC0
+#define PID_GPIO_S	0xC2
+#define PID_GPIO_W	0xC7
+#define PID_GPIO_NW	0xC4
+#define PID_GPIO_N	0xC5
+#define PID_ITSS	0xD0
+#define PID_RTC		0xD1
+
+/*
+ * Miscellaneous Configuration register(MISCCFG). These are community-specific
+ * registers and are meant to house miscellaneous configuration fields per
+ * community. There are 8 GPIO groups: GPP_0 -> GPP_8 (Group 3 is absent)
+ */
+#define GPIO_MISCCFG		0x10 /* Miscellaneous Configuration offset */
+#define  GPIO_GPE_SW_31_0	0 /* SOUTHWEST GPIO#  0 ~ 31 belong to GROUP0 */
+#define  GPIO_GPE_SW_63_32	1 /* SOUTHWEST GPIO# 32 ~ 42 belong to GROUP1 */
+#define  GPIO_GPE_W_31_0	2 /* WEST      GPIO#  0 ~ 25 belong to GROUP2 */
+#define  GPIO_GPE_NW_31_0	4 /* NORTHWEST GPIO#  0 ~ 17 belong to GROUP4 */
+#define  GPIO_GPE_NW_63_32	5 /* NORTHWEST GPIO# 32 ~ 63 belong to GROUP5 */
+#define  GPIO_GPE_NW_95_64	6 /* NORTHWEST GPIO# 64 ~ 76 belong to GROUP6 */
+#define  GPIO_GPE_N_31_0	7 /* NORTH     GPIO#  0 ~ 31 belong to GROUP7 */
+#define  GPIO_GPE_N_63_32	8 /* NORTH     GPIO# 32 ~ 61 belong to GROUP8 */
+
+#define GPIO_MAX_NUM_PER_GROUP	32
+
+/*
+ * Host Software Pad Ownership Register.
+ * The pins in the community are divided into 3 groups:
+ * GPIO 0 ~ 31, GPIO 32 ~ 63, GPIO 64 ~ 95
+ */
+#define HOSTSW_OWN_REG_0		0x80
+
+#define PAD_CFG_BASE			0x500
+
+#define GPI_INT_STS_0			0x100
+#define GPI_INT_EN_0			0x110
+
+#define GPI_SMI_STS_0			0x140
+#define GPI_SMI_EN_0			0x150
+
+#define NUM_N_PADS			(PAD_N(SVID0_CLK) + 1)
+#define NUM_NW_PADS			(PAD_NW(GPIO_123) + 1)
+#define NUM_W_PADS			(PAD_W(SUSPWRDNACK) + 1)
+#define NUM_SW_PADS			(PAD_SW(LPC_FRAMEB) + 1)
+
+#define NUM_N_GPI_REGS	\
+	(ALIGN(NUM_N_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+#define NUM_NW_GPI_REGS	\
+	(ALIGN(NUM_NW_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+#define NUM_W_GPI_REGS	\
+	(ALIGN(NUM_W_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+#define NUM_SW_GPI_REGS	\
+	(ALIGN(NUM_SW_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+/*
+ * Total number of GPI status registers across all GPIO communities in the SOC
+ */
+#define NUM_GPI_STATUS_REGS		(NUM_N_GPI_REGS + NUM_NW_GPI_REGS \
+					+ NUM_W_GPI_REGS + NUM_SW_GPI_REGS)
+
+/* North community pads */
+#define GPIO_0				0
+#define GPIO_1				1
+#define GPIO_2				2
+#define GPIO_3				3
+#define GPIO_4				4
+#define GPIO_5				5
+#define GPIO_6				6
+#define GPIO_7				7
+#define GPIO_8				8
+#define GPIO_9				9
+#define GPIO_10				10
+#define GPIO_11				11
+#define GPIO_12				12
+#define GPIO_13				13
+#define GPIO_14				14
+#define GPIO_15				15
+#define GPIO_16				16
+#define GPIO_17				17
+#define GPIO_18				18
+#define GPIO_19				19
+#define GPIO_20				20
+#define GPIO_21				21
+#define GPIO_22				22
+#define GPIO_23				23
+#define GPIO_24				24
+#define GPIO_25				25
+#define GPIO_26				26
+#define GPIO_27				27
+#define GPIO_28				28
+#define GPIO_29				29
+#define GPIO_30				30
+#define GPIO_31				31
+#define GPIO_32				32
+#define GPIO_33				33
+#define GPIO_34				34
+#define GPIO_35				35
+#define GPIO_36				36
+#define GPIO_37				37
+#define GPIO_38				38
+#define GPIO_39				39
+#define GPIO_40				40
+#define GPIO_41				41
+#define GPIO_42				42
+#define GPIO_43				43
+#define GPIO_44				44
+#define GPIO_45				45
+#define GPIO_46				46
+#define GPIO_47				47
+#define GPIO_48				48
+#define GPIO_49				49
+#define GPIO_62				50
+#define GPIO_63				51
+#define GPIO_64				52
+#define GPIO_65				53
+#define GPIO_66				54
+#define GPIO_67				55
+#define GPIO_68				56
+#define GPIO_69				57
+#define GPIO_70				58
+#define GPIO_71				59
+#define GPIO_72				60
+#define GPIO_73				61
+#define JTAG_TCK			62
+#define JTAG_TRST_B			63
+#define JTAG_TMS			64
+#define JTAG_TDI			65
+#define JTAG_CX_PMODE			66
+#define JTAG_CX_PREQ_B			67
+#define JTAGX				68
+#define JTAG_CX_PRDY_B			69
+#define JTAG_TDO			70
+#define CNV_BRI_DT			71
+#define CNV_BRI_RSP			72
+#define CNV_RGI_DT			73
+#define CNV_RGI_RSP			74
+#define SVID0_ALERT_B			75
+#define SVID0_DATA			76
+#define SVID0_CLK			77
+
+/* Northwest community pads */
+#define GPIO_187			78
+#define GPIO_188			79
+#define GPIO_189			80
+#define GPIO_190			81
+#define GPIO_191			82
+#define GPIO_192			83
+#define GPIO_193			84
+#define GPIO_194			85
+#define GPIO_195			86
+#define GPIO_196			87
+#define GPIO_197			88
+#define GPIO_198			89
+#define GPIO_199			90
+#define GPIO_200			91
+#define GPIO_201			92
+#define GPIO_202			93
+#define GPIO_203			94
+#define GPIO_204			95
+#define PMC_SPI_FS0			96
+#define PMC_SPI_FS1			97
+#define PMC_SPI_FS2			98
+#define PMC_SPI_RXD			99
+#define PMC_SPI_TXD			100
+#define PMC_SPI_CLK			101
+#define PMIC_PWRGOOD			102
+#define PMIC_RESET_B			103
+#define GPIO_213			104
+#define GPIO_214			105
+#define GPIO_215			106
+#define PMIC_THERMTRIP_B		107
+#define PMIC_STDBY			108
+#define PROCHOT_B			109
+#define PMIC_I2C_SCL			110
+#define PMIC_I2C_SDA			111
+#define GPIO_74				112
+#define GPIO_75				113
+#define GPIO_76				114
+#define GPIO_77				115
+#define GPIO_78				116
+#define GPIO_79				117
+#define GPIO_80				118
+#define GPIO_81				119
+#define GPIO_82				120
+#define GPIO_83				121
+#define GPIO_84				122
+#define GPIO_85				123
+#define GPIO_86				124
+#define GPIO_87				125
+#define GPIO_88				126
+#define GPIO_89				127
+#define GPIO_90				128
+#define GPIO_91				129
+#define GPIO_92				130
+#define GPIO_97				131
+#define GPIO_98				132
+#define GPIO_99				133
+#define GPIO_100			134
+#define GPIO_101			135
+#define GPIO_102			136
+#define GPIO_103			137
+#define FST_SPI_CLK_FB			138
+#define GPIO_104			139
+#define GPIO_105			140
+#define GPIO_106			141
+#define GPIO_109			142
+#define GPIO_110			143
+#define GPIO_111			144
+#define GPIO_112			145
+#define GPIO_113			146
+#define GPIO_116			147
+#define GPIO_117			148
+#define GPIO_118			149
+#define GPIO_119			150
+#define GPIO_120			151
+#define GPIO_121			152
+#define GPIO_122			153
+#define GPIO_123			154
+
+/* West community pads */
+#define GPIO_124			155
+#define GPIO_125			156
+#define GPIO_126			157
+#define GPIO_127			158
+#define GPIO_128			159
+#define GPIO_129			160
+#define GPIO_130			161
+#define GPIO_131			162
+#define GPIO_132			163
+#define GPIO_133			164
+#define GPIO_134			165
+#define GPIO_135			166
+#define GPIO_136			167
+#define GPIO_137			168
+#define GPIO_138			169
+#define GPIO_139			170
+#define GPIO_146			171
+#define GPIO_147			172
+#define GPIO_148			173
+#define GPIO_149			174
+#define GPIO_150			175
+#define GPIO_151			176
+#define GPIO_152			177
+#define GPIO_153			178
+#define GPIO_154			179
+#define GPIO_155			180
+#define GPIO_209			181
+#define GPIO_210			182
+#define GPIO_211			183
+#define GPIO_212			184
+#define OSC_CLK_OUT_0			185
+#define OSC_CLK_OUT_1			186
+#define OSC_CLK_OUT_2			187
+#define OSC_CLK_OUT_3			188
+#define OSC_CLK_OUT_4			189
+#define PMU_AC_PRESENT			190
+#define PMU_BATLOW_B			191
+#define PMU_PLTRST_B			192
+#define PMU_PWRBTN_B			193
+#define PMU_RESETBUTTON_B		194
+#define PMU_SLP_S0_B			195
+#define PMU_SLP_S3_B			196
+#define PMU_SLP_S4_B			197
+#define PMU_SUSCLK			198
+#define PMU_WAKE_B			199
+#define SUS_STAT_B			200
+#define SUSPWRDNACK			201
+
+/* Southwest community pads */
+#define GPIO_205			202
+#define GPIO_206			203
+#define GPIO_207			204
+#define GPIO_208			205
+#define GPIO_156			206
+#define GPIO_157			207
+#define GPIO_158			208
+#define GPIO_159			209
+#define GPIO_160			210
+#define GPIO_161			211
+#define GPIO_162			212
+#define GPIO_163			213
+#define GPIO_164			214
+#define GPIO_165			215
+#define GPIO_166			216
+#define GPIO_167			217
+#define GPIO_168			218
+#define GPIO_169			219
+#define GPIO_170			220
+#define GPIO_171			221
+#define GPIO_172			222
+#define GPIO_179			223
+#define GPIO_173			224
+#define GPIO_174			225
+#define GPIO_175			226
+#define GPIO_176			227
+#define GPIO_177			228
+#define GPIO_178			229
+#define GPIO_186			230
+#define GPIO_182			231
+#define GPIO_183			232
+#define SMB_ALERTB			233
+#define SMB_CLK				234
+#define SMB_DATA			235
+#define LPC_ILB_SERIRQ			236
+#define LPC_CLKOUT0			237
+#define LPC_CLKOUT1			238
+#define LPC_AD0				239
+#define LPC_AD1				240
+#define LPC_AD2				241
+#define LPC_AD3				242
+#define LPC_CLKRUNB			243
+#define LPC_FRAMEB			244
+
+/* PERST_0 not defined */
+#define GPIO_PRT0_UDEF			0xFF
+
+#define TOTAL_PADS			245
+#define N_OFFSET			GPIO_0
+#define NW_OFFSET			GPIO_187
+#define W_OFFSET			GPIO_124
+#define SW_OFFSET			GPIO_205
+
+/* Macros for translating a global pad offset to a local offset */
+#define PAD_N(pad)			(pad - N_OFFSET)
+#define PAD_NW(pad)			(pad - NW_OFFSET)
+#define PAD_W(pad)			(pad - W_OFFSET)
+#define PAD_SW(pad)			(pad - SW_OFFSET)
+
+/* Linux names of the GPIO devices */
+#define GPIO_COMM_N_NAME		"INT3452:00"
+#define GPIO_COMM_NW_NAME		"INT3452:01"
+#define GPIO_COMM_W_NAME		"INT3452:02"
+#define GPIO_COMM_SW_NAME		"INT3452:03"
+
+/* Following is used in gpio asl */
+#define GPIO_COMM_NAME			"INT3452"
+#define GPIO_COMM_0_DESC	\
+	"General Purpose Input/Output (GPIO) Controller - North"
+#define GPIO_COMM_1_DESC	\
+	"General Purpose Input/Output (GPIO) Controller - Northwest"
+#define GPIO_COMM_2_DESC	\
+	"General Purpose Input/Output (GPIO) Controller - West"
+#define GPIO_COMM_3_DESC	\
+	"General Purpose Input/Output (GPIO) Controller - Southwest"
+
+#define GPIO_COMM0_PID			PID_GPIO_N
+#define GPIO_COMM1_PID			PID_GPIO_NW
+#define GPIO_COMM2_PID			PID_GPIO_W
+#define GPIO_COMM3_PID			PID_GPIO_SW
+
+/*
+ * IOxAPIC IRQs for the GPIOs, overlap is expected as we encourage to use
+ * shared IRQ instead of direct IRQ, in case of overlapping, we can easily
+ * program one of the overlap to shared IRQ to avoid the conflict.
+ */
+
+/* NorthWest community pads */
+#define PMIC_I2C_SDA_IRQ		0x32
+#define GPIO_74_IRQ			0x33
+#define GPIO_75_IRQ			0x34
+#define GPIO_76_IRQ			0x35
+#define GPIO_77_IRQ			0x36
+#define GPIO_78_IRQ			0x37
+#define GPIO_79_IRQ			0x38
+#define GPIO_80_IRQ			0x39
+#define GPIO_81_IRQ			0x3A
+#define GPIO_82_IRQ			0x3B
+#define GPIO_83_IRQ			0x3C
+#define GPIO_84_IRQ			0x3D
+#define GPIO_85_IRQ			0x3E
+#define GPIO_86_IRQ			0x3F
+#define GPIO_87_IRQ			0x40
+#define GPIO_88_IRQ			0x41
+#define GPIO_89_IRQ			0x42
+#define GPIO_90_IRQ			0x43
+#define GPIO_91_IRQ			0x44
+#define GPIO_97_IRQ			0x49
+#define GPIO_98_IRQ			0x4A
+#define GPIO_99_IRQ			0x4B
+#define GPIO_100_IRQ			0x4C
+#define GPIO_101_IRQ			0x4D
+#define GPIO_102_IRQ			0x4E
+#define GPIO_103_IRQ			0x4F
+#define GPIO_104_IRQ			0x50
+#define GPIO_105_IRQ			0x51
+#define GPIO_106_IRQ			0x52
+#define GPIO_109_IRQ			0x54
+#define GPIO_110_IRQ			0x55
+#define GPIO_111_IRQ			0x56
+#define GPIO_112_IRQ			0x57
+#define GPIO_113_IRQ			0x58
+#define GPIO_116_IRQ			0x5B
+#define GPIO_117_IRQ			0x5C
+#define GPIO_118_IRQ			0x5D
+#define GPIO_119_IRQ			0x5E
+#define GPIO_120_IRQ			0x5F
+#define GPIO_121_IRQ			0x60
+#define GPIO_122_IRQ			0x61
+#define GPIO_123_IRQ			0x62
+
+/* North community pads */
+#define GPIO_0_IRQ			0x63
+#define GPIO_1_IRQ			0x64
+#define GPIO_2_IRQ			0x65
+#define GPIO_3_IRQ			0x66
+#define GPIO_4_IRQ			0x67
+#define GPIO_5_IRQ			0x68
+#define GPIO_6_IRQ			0x69
+#define GPIO_7_IRQ			0x6A
+#define GPIO_8_IRQ			0x6B
+#define GPIO_9_IRQ			0x6C
+#define GPIO_10_IRQ			0x6D
+#define GPIO_11_IRQ			0x6E
+#define GPIO_12_IRQ			0x6F
+#define GPIO_13_IRQ			0x70
+#define GPIO_14_IRQ			0x71
+#define GPIO_15_IRQ			0x72
+#define GPIO_16_IRQ			0x73
+#define GPIO_17_IRQ			0x74
+#define GPIO_18_IRQ			0x75
+#define GPIO_19_IRQ			0x76
+#define GPIO_20_IRQ			0x77
+#define GPIO_21_IRQ			0x32
+#define GPIO_22_IRQ			0x33
+#define GPIO_23_IRQ			0x34
+#define GPIO_24_IRQ			0x35
+#define GPIO_25_IRQ			0x36
+#define GPIO_26_IRQ			0x37
+#define GPIO_27_IRQ			0x38
+#define GPIO_28_IRQ			0x39
+#define GPIO_29_IRQ			0x3A
+#define GPIO_30_IRQ			0x3B
+#define GPIO_31_IRQ			0x3C
+#define GPIO_32_IRQ			0x3D
+#define GPIO_33_IRQ			0x3E
+#define GPIO_34_IRQ			0x3F
+#define GPIO_35_IRQ			0x40
+#define GPIO_36_IRQ			0x41
+#define GPIO_37_IRQ			0x42
+#define GPIO_38_IRQ			0x43
+#define GPIO_39_IRQ			0x44
+#define GPIO_40_IRQ			0x45
+#define GPIO_41_IRQ			0x46
+#define GPIO_42_IRQ			0x47
+#define GPIO_43_IRQ			0x48
+#define GPIO_44_IRQ			0x49
+#define GPIO_45_IRQ			0x4A
+#define GPIO_46_IRQ			0x4B
+#define GPIO_47_IRQ			0x4C
+#define GPIO_48_IRQ			0x4D
+#define GPIO_49_IRQ			0x4E
+#define GPIO_62_IRQ			0x5B
+#define GPIO_63_IRQ			0x5C
+#define GPIO_64_IRQ			0x5D
+#define GPIO_65_IRQ			0x5E
+#define GPIO_66_IRQ			0x5F
+#define GPIO_67_IRQ			0x60
+#define GPIO_68_IRQ			0x61
+#define GPIO_69_IRQ			0x62
+#define GPIO_70_IRQ			0x63
+#define GPIO_71_IRQ			0x64
+#define GPIO_72_IRQ			0x65
+#define GPIO_73_IRQ			0x66
+
+#endif /* _ASM_ARCH_GPIO_H_ */
diff --git a/arch/x86/include/asm/arch-apollolake/iomap.h b/arch/x86/include/asm/arch-apollolake/iomap.h
new file mode 100644
index 0000000..4ce1017
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/iomap.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ * Take from coreboot project file of the same name
+ */
+
+#ifndef _ASM_ARCH_IOMAP_H
+#define _ASM_ARCH_IOMAP_H
+
+#define R_ACPI_PM1_TMR			0x8
+
+/* Put p2sb at 0xd0000000 in TPL */
+#define IOMAP_P2SB_BAR		0xd0000000
+
+#define IOMAP_SPI_BASE		0xfe010000
+
+#define IOMAP_ACPI_BASE		0x400
+#define IOMAP_ACPI_SIZE		0x100
+
+/*
+ * Use UART2. To use UART1 you need to set '2' to '1', change device tree serial
+ * node name and 'reg' property, and update CONFIG_DEBUG_UART_BASE.
+ */
+#define PCH_DEV_UART		PCI_BDF(0, 0x18, 2)
+
+#define PCH_DEV_LPC		PCI_BDF(0, 0x1f, 0)
+#define PCH_DEV_SPI		PCI_BDF(0, 0x0d, 2)
+
+#endif
diff --git a/arch/x86/include/asm/arch-apollolake/itss.h b/arch/x86/include/asm/arch-apollolake/itss.h
new file mode 100644
index 0000000..1e29503
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/itss.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ * Copyright 2019 Google LLC
+ *
+ * Modified from coreboot itss.h
+ */
+
+#ifndef _ASM_ARCH_ITSS_H
+#define _ASM_ARCH_ITSS_H
+
+#define GPIO_IRQ_START	50
+#define GPIO_IRQ_END	ITSS_MAX_IRQ
+
+#define ITSS_MAX_IRQ	119
+#define IRQS_PER_IPC	32
+#define NUM_IPC_REGS	((ITSS_MAX_IRQ + IRQS_PER_IPC - 1) / IRQS_PER_IPC)
+
+/* Max PXRC registers in ITSS */
+#define MAX_PXRC_CONFIG	(PCR_ITSS_PIRQH_ROUT - PCR_ITSS_PIRQA_ROUT + 1)
+
+/* PIRQA Routing Control Register */
+#define PCR_ITSS_PIRQA_ROUT	0x3100
+/* PIRQB Routing Control Register */
+#define PCR_ITSS_PIRQB_ROUT	0x3101
+/* PIRQC Routing Control Register */
+#define PCR_ITSS_PIRQC_ROUT	0x3102
+/* PIRQD Routing Control Register */
+#define PCR_ITSS_PIRQD_ROUT	0x3103
+/* PIRQE Routing Control Register */
+#define PCR_ITSS_PIRQE_ROUT	0x3104
+/* PIRQF Routing Control Register */
+#define PCR_ITSS_PIRQF_ROUT	0x3105
+/* PIRQG Routing Control Register */
+#define PCR_ITSS_PIRQG_ROUT	0x3106
+/* PIRQH Routing Control Register */
+#define PCR_ITSS_PIRQH_ROUT	0x3107
+/* ITSS Interrupt polarity control */
+#define PCR_ITSS_IPC0_CONF	0x3200
+/* ITSS Power reduction control */
+#define PCR_ITSS_ITSSPRC	0x3300
+
+#endif /* _ASM_ARCH_ITSS_H */
diff --git a/arch/x86/include/asm/arch-apollolake/lpc.h b/arch/x86/include/asm/arch-apollolake/lpc.h
new file mode 100644
index 0000000..5d2adad
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/lpc.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ * Take from coreboot project file of the same name
+ */
+
+#ifndef _ASM_ARCH_LPC_H
+#define _ASM_ARCH_LPC_H
+
+#define LPC_SERIRQ_CTL			0x64
+#define  LPC_SCNT_EN			BIT(7)
+#define  LPC_SCNT_MODE			BIT(6)
+#define LPC_IO_DECODE			0x80
+#define  LPC_IOD_COMA_RANGE             (0 << 0) /* 0x3F8 - 0x3FF COMA*/
+#define  LPC_IOD_COMB_RANGE             (1 << 4) /* 0x2F8 - 0x2FF COMB*/
+/*
+ * Use IO_<peripheral>_<IO port> style macros defined in lpc_lib.h
+ * to enable decoding of I/O locations for a peripheral
+ */
+#define LPC_IO_ENABLES			0x82
+#define LPC_GENERIC_IO_RANGE(n)		((((n) & 0x3) * 4) + 0x84)
+#define  LPC_LGIR_AMASK_MASK		(0xfc << 16)
+#define  LPC_LGIR_ADDR_MASK		0xfffc
+#define  LPC_LGIR_EN			BIT(0)
+#define LPC_LGIR_MAX_WINDOW_SIZE	256
+#define LPC_GENERIC_MEM_RANGE		0x98
+#define  LPC_LGMR_ADDR_MASK		0xffff0000
+#define  LPC_LGMR_EN			BIT(0)
+#define LPC_LGMR_WINDOW_SIZE		(64 * KiB)
+#define LPC_BIOS_CNTL			0xdc
+#define  LPC_BC_BILD			BIT(7)
+#define  LPC_BC_LE			BIT(1)
+#define  LPC_BC_EISS			BIT(5)
+#define LPC_PCCTL			0xE0	/* PCI Clock Control */
+#define  LPC_PCCTL_CLKRUN_EN		BIT(0)
+
+/*
+ * IO decode enable macros are in the format IO_<peripheral>_<IO port>.
+ * For example, to open ports 0x60, 0x64 for the keyboard controller,
+ * use IOE_KBC_60_64 macro. For IOE_ macros that do not specify a port range,
+ * the port range is selectable via the IO decodes register.
+ */
+#define LPC_IOE_EC_4E_4F		BIT(13)
+#define LPC_IOE_SUPERIO_2E_2F		BIT(12)
+#define LPC_IOE_EC_62_66		BIT(11)
+#define LPC_IOE_KBC_60_64		BIT(10)
+#define LPC_IOE_HGE_208			BIT(9)
+#define LPC_IOE_LGE_200			BIT(8)
+#define LPC_IOE_FDD_EN			BIT(3)
+#define LPC_IOE_LPT_EN			BIT(2)
+#define LPC_IOE_COMB_EN			BIT(1)
+#define LPC_IOE_COMA_EN			BIT(0)
+#define LPC_NUM_GENERIC_IO_RANGES	4
+
+#define LPC_IO_ENABLES			0x82
+
+/**
+ * lpc_enable_fixed_io_ranges() - enable the fixed I/O ranges
+ *
+ * @io_enables: Mask of things to enable (LPC_IOE_.)
+ */
+void lpc_enable_fixed_io_ranges(uint io_enables);
+
+/**
+ * lpc_open_pmio_window() - Open an IO port range
+ *
+ * @base: Base I/O address (e.g. 0x800)
+ * @size: Size of window (e.g. 0x100)
+ * @return 0 if OK, -ENOSPC if there are no more windows available, -EALREADY
+ *	if already set up
+ */
+int lpc_open_pmio_window(uint base, uint size);
+
+/**
+ * lpc_io_setup_comm_a_b() - Set up basic serial UARTs
+ *
+ * Set up the LPC to handle I/O to the COMA/COMB serial UART addresses
+ * 2f8-2ff and 3f8-3ff.
+ */
+void lpc_io_setup_comm_a_b(void);
+
+#endif
diff --git a/arch/x86/include/asm/arch-apollolake/pch.h b/arch/x86/include/asm/arch-apollolake/pch.h
new file mode 100644
index 0000000..bf3e167
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/pch.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef _ASM_ARCH_PCH_H
+#define _ASM_ARCH_PCH_H
+
+#endif /* _ASM_ARCH_PCH_H */
diff --git a/arch/x86/include/asm/arch-apollolake/pm.h b/arch/x86/include/asm/arch-apollolake/pm.h
new file mode 100644
index 0000000..6718290
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/pm.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2015-2016 Intel Corp.
+ * (Written by Lance Zhao <lijian.zhao@intel.com> for Intel Corp.)
+ */
+
+#ifndef _ASM_ARCH_PM_H
+#define _ASM_ARCH_PM_H
+
+#define PMC_GPE_SW_31_0	0
+#define PMC_GPE_SW_63_32	1
+#define PMC_GPE_NW_31_0	3
+#define PMC_GPE_NW_63_32	4
+#define PMC_GPE_NW_95_64	5
+#define PMC_GPE_N_31_0		6
+#define PMC_GPE_N_63_32	7
+#define PMC_GPE_W_31_0		9
+
+#endif
diff --git a/arch/x86/include/asm/arch-apollolake/systemagent.h b/arch/x86/include/asm/arch-apollolake/systemagent.h
new file mode 100644
index 0000000..206d890
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/systemagent.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ * Take from coreboot project file of the same name
+ */
+
+#ifndef _ASM_ARCH_SYSTEMAGENT_H
+#define _ASM_ARCH_SYSTEMAGENT_H
+
+/* Device 0:0.0 PCI configuration space */
+#define MCHBAR		0x48
+
+/* RAPL Package Power Limit register under MCHBAR */
+#define PUNIT_THERMAL_DEVICE_IRQ		0x700C
+#define PUINT_THERMAL_DEVICE_IRQ_VEC_NUMBER	0x18
+#define PUINT_THERMAL_DEVICE_IRQ_LOCK		0x80000000
+#define BIOS_RESET_CPL		0x7078
+#define   PCODE_INIT_DONE	BIT(8)
+#define MCHBAR_RAPL_PPL		0x70A8
+#define CORE_DISABLE_MASK	0x7168
+#define CAPID0_A		0xE4
+#define   VTD_DISABLE		BIT(23)
+#define DEFVTBAR		0x6c80
+#define GFXVTBAR		0x6c88
+#define   VTBAR_ENABLED		0x01
+#define VTBAR_MASK		GENMASK_ULL(39, 12)
+#define VTBAR_SIZE		0x1000
+
+/**
+ * enable_bios_reset_cpl() - Tell the system agent that memory/power are ready
+ *
+ * This should be called when U-Boot has set up the memory and power
+ * management.
+ */
+void enable_bios_reset_cpl(void);
+
+#endif
diff --git a/arch/x86/include/asm/arch-apollolake/uart.h b/arch/x86/include/asm/arch-apollolake/uart.h
new file mode 100644
index 0000000..d4fffe6
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/uart.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef _ASM_ARCH_UART_H
+#define _ASM_ARCH_UART_H
+
+/**
+ * apl_uart_init() - Set up the APL UART device and clock
+ *
+ * This enables the PCI device, sets up the MMIO region and turns on the clock
+ * using LPSS.
+ *
+ * The UART won't actually work unless the GPIO settings are correct and the
+ * signals actually exit the SoC. See board_debug_uart_init() for that.
+ */
+int apl_uart_init(pci_dev_t bdf, ulong base);
+
+#endif
diff --git a/arch/x86/include/asm/arch-broadwell/cpu.h b/arch/x86/include/asm/arch-broadwell/cpu.h
index 3bc3bd6..2b39a76 100644
--- a/arch/x86/include/asm/arch-broadwell/cpu.h
+++ b/arch/x86/include/asm/arch-broadwell/cpu.h
@@ -27,7 +27,6 @@
 
 #define MSR_VR_CURRENT_CONFIG		0x601
 #define MSR_VR_MISC_CONFIG		0x603
-#define MSR_PKG_POWER_SKU		0x614
 #define MSR_DDR_RAPL_LIMIT		0x618
 #define MSR_VR_MISC_CONFIG2		0x636
 
diff --git a/arch/x86/include/asm/arch-ivybridge/model_206ax.h b/arch/x86/include/asm/arch-ivybridge/model_206ax.h
index 4839ebc..5c06629 100644
--- a/arch/x86/include/asm/arch-ivybridge/model_206ax.h
+++ b/arch/x86/include/asm/arch-ivybridge/model_206ax.h
@@ -43,7 +43,6 @@
 #define MSR_PP1_CURRENT_CONFIG		0x602
 #define  PP1_CURRENT_LIMIT_SNB		(35 << 3) /* 35 A */
 #define  PP1_CURRENT_LIMIT_IVB		(50 << 3) /* 50 A */
-#define MSR_PKG_POWER_SKU		0x614
 
 #define IVB_CONFIG_TDP_MIN_CPUID	0x306a2
 #define MSR_CONFIG_TDP_LEVEL1		0x649
diff --git a/arch/x86/include/asm/fast_spi.h b/arch/x86/include/asm/fast_spi.h
new file mode 100644
index 0000000..6894298
--- /dev/null
+++ b/arch/x86/include/asm/fast_spi.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ */
+
+#ifndef ASM_FAST_SPI_H
+#define ASM_FAST_SPI_H
+
+/* Register offsets from the MMIO region base (PCI_BASE_ADDRESS_0) */
+struct fast_spi_regs {
+	u32 bfp;
+	u32 hsfsts_ctl;
+	u32 faddr;
+	u32 dlock;
+
+	u32 fdata[0x10];
+
+	u32 fracc;
+	u32 freg[12];
+	u32 fpr[5];
+	u32 gpr0;
+	u32 spare2;
+	u32 sts_ctl;
+	u16 preop;
+	u16 optype;
+	u8 opmenu[8];
+
+	u32 spare3;
+	u32 fdoc;
+	u32 fdod;
+	u32 spare4;
+	u32 afc;
+	u32 vscc[2];
+	u32 ptinx;
+	u32 ptdata;
+};
+check_member(fast_spi_regs, ptdata, 0xd0);
+
+/* Bit definitions for BFPREG (0x00) register */
+#define SPIBAR_BFPREG_PRB_MASK		0x7fff
+#define SPIBAR_BFPREG_PRL_SHIFT		16
+#define SPIBAR_BFPREG_PRL_MASK		(0x7fff << SPIBAR_BFPREG_PRL_SHIFT)
+
+/* PCI configuration registers */
+#define SPIBAR_BIOS_CONTROL			0xdc
+#define SPIBAR_BIOS_CONTROL_WPD			BIT(0)
+#define SPIBAR_BIOS_CONTROL_LOCK_ENABLE		BIT(1)
+#define SPIBAR_BIOS_CONTROL_CACHE_DISABLE	BIT(2)
+#define SPIBAR_BIOS_CONTROL_PREFETCH_ENABLE	BIT(3)
+#define SPIBAR_BIOS_CONTROL_EISS		BIT(5)
+#define SPIBAR_BIOS_CONTROL_BILD		BIT(7)
+
+/**
+ * fast_spi_get_bios_mmap() - Get memory map for SPI flash
+ *
+ * @pdev:	PCI device to use (this is the Fast SPI device)
+ * @map_basep:	Returns base memory address for mapped SPI
+ * @map_sizep:	Returns size of mapped SPI
+ * @offsetp:	Returns start offset of SPI flash where the map works
+ *	correctly (offsets before this are not visible)
+ * @return 0 (always)
+ */
+int fast_spi_get_bios_mmap(pci_dev_t pdev, ulong *map_basep, uint *map_sizep,
+			   uint *offsetp);
+
+int fast_spi_early_init(pci_dev_t pdev, ulong mmio_base);
+
+#endif	/* ASM_FAST_SPI_H */
diff --git a/arch/x86/include/asm/fsp/fsp_api.h b/arch/x86/include/asm/fsp/fsp_api.h
new file mode 100644
index 0000000..e9ac86b
--- /dev/null
+++ b/arch/x86/include/asm/fsp/fsp_api.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef __ASM_FSP_API_H
+#define __ASM_FSP_API_H
+
+enum fsp_phase {
+	/* Notification code for post PCI enuermation */
+	INIT_PHASE_PCI	= 0x20,
+	/* Notification code before transferring control to the payload */
+	INIT_PHASE_BOOT	= 0x40
+};
+
+struct fsp_notify_params {
+	/* Notification phase used for NotifyPhase API */
+	enum fsp_phase	phase;
+};
+
+/* FspNotify API function prototype */
+typedef asmlinkage u32 (*fsp_notify_f)(struct fsp_notify_params *params);
+
+#endif
diff --git a/arch/x86/include/asm/fsp/fsp_support.h b/arch/x86/include/asm/fsp/fsp_support.h
index 4ac27d2..29e5114 100644
--- a/arch/x86/include/asm/fsp/fsp_support.h
+++ b/arch/x86/include/asm/fsp/fsp_support.h
@@ -144,13 +144,6 @@ int fsp_init_phase_pci(void);
 int fsp_scan_for_ram_size(void);
 
 /**
- * fsp_prepare_mrc_cache() - Find the DRAM training data from the MRC cache
- *
- * @return pointer to data, or NULL if no cache or no data found in the cache
- */
-void *fsp_prepare_mrc_cache(void);
-
-/**
  * fsp_notify() - FSP notification wrapper function
  *
  * @fsp_hdr: Pointer to FSP information header
diff --git a/arch/x86/include/asm/fsp1/fsp_api.h b/arch/x86/include/asm/fsp1/fsp_api.h
index f2d7079..524da5f 100644
--- a/arch/x86/include/asm/fsp1/fsp_api.h
+++ b/arch/x86/include/asm/fsp1/fsp_api.h
@@ -4,11 +4,11 @@
  * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
  */
 
-#ifndef __FSP_API_H__
-#define __FSP_API_H__
+#ifndef __FSP1_API_H__
+#define __FSP1_API_H__
 
 #include <linux/linkage.h>
-
+#include <asm/fsp/fsp_api.h>
 /*
  * FSP common configuration structure.
  * This needs to be included in the platform-specific struct fsp_config_data.
@@ -46,22 +46,7 @@ struct common_buf {
 	u32	reserved[6];	/* Reserved */
 };
 
-enum fsp_phase {
-	/* Notification code for post PCI enuermation */
-	INIT_PHASE_PCI	= 0x20,
-	/* Notification code before transfering control to the payload */
-	INIT_PHASE_BOOT	= 0x40
-};
-
-struct fsp_notify_params {
-	/* Notification phase used for NotifyPhase API */
-	enum fsp_phase	phase;
-};
-
 /* FspInit API function prototype */
 typedef asmlinkage u32 (*fsp_init_f)(struct fsp_init_params *params);
 
-/* FspNotify API function prototype */
-typedef asmlinkage u32 (*fsp_notify_f)(struct fsp_notify_params *params);
-
 #endif
diff --git a/arch/x86/include/asm/fsp2/fsp_api.h b/arch/x86/include/asm/fsp2/fsp_api.h
new file mode 100644
index 0000000..af1e885
--- /dev/null
+++ b/arch/x86/include/asm/fsp2/fsp_api.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: Intel */
+/*
+ * Copyright (C) 2015-2016 Intel Corp.
+ * (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.)
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ * Mostly taken from coreboot fsp2_0/memory_init.c
+ */
+
+#ifndef __ASM_FSP2_API_H
+#define __ASM_FSP2_API_H
+
+#include <asm/fsp/fsp_api.h>
+
+struct fspm_upd;
+struct fsps_upd;
+struct hob_header;
+
+enum fsp_boot_mode {
+	FSP_BOOT_WITH_FULL_CONFIGURATION = 0x00,
+	FSP_BOOT_WITH_MINIMAL_CONFIGURATION = 0x01,
+	FSP_BOOT_ASSUMING_NO_CONFIGURATION_CHANGES = 0x02,
+	FSP_BOOT_ON_S4_RESUME = 0x05,
+	FSP_BOOT_ON_S3_RESUME = 0x11,
+	FSP_BOOT_ON_FLASH_UPDATE = 0x12,
+	FSP_BOOT_IN_RECOVERY_MODE = 0x20
+};
+
+struct __packed fsp_upd_header {
+	u64	signature;
+	u8	revision;
+	u8	reserved[23];
+};
+
+/**
+ * fsp_memory_init() - Init the SDRAM
+ *
+ * @s3wake: true if we are booting from resume, so cannot reinit the mememory
+ *	from scatch since we will lose its contents
+ * @use_spi_flash: true to use the fast SPI driver to read FSP, otherwise use
+ *	mapped SPI
+ * @return 0 if OK, -ve on error
+ */
+int fsp_memory_init(bool s3wake, bool use_spi_flash);
+
+typedef asmlinkage int (*fsp_memory_init_func)(struct fspm_upd *params,
+					       struct hob_header **hobp);
+
+/**
+ * fsp_silicon_init() - Init the silicon
+ *
+ * This calls the FSP's 'silicon init' entry point
+ *
+ * @s3wake: true if we are booting from resume, so cannot reinit the mememory
+ *	from scatch since we will lose its contents
+ * @use_spi_flash: true to use the fast SPI driver to read FSP, otherwise use
+ *	mapped SPI
+ * @return 0 if OK, -ve on error
+ */
+int fsp_silicon_init(bool s3wake, bool use_spi_flash);
+
+typedef asmlinkage int (*fsp_silicon_init_func)(struct fsps_upd *params);
+
+#endif
diff --git a/arch/x86/include/asm/fsp2/fsp_internal.h b/arch/x86/include/asm/fsp2/fsp_internal.h
new file mode 100644
index 0000000..f751fbf
--- /dev/null
+++ b/arch/x86/include/asm/fsp2/fsp_internal.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: Intel */
+/*
+ * Copyright (C) 2015-2016 Intel Corp.
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ * Mostly taken from coreboot
+ */
+
+#ifndef __ASM_FSP_INTERNAL_H
+#define __ASM_FSP_INTERNAL_H
+
+struct binman_entry;
+struct fsp_header;
+struct fspm_upd;
+struct fsps_upd;
+
+enum fsp_type_t {
+	FSP_M,
+	FSP_S,
+};
+
+int fsp_get_header(ulong offset, ulong size, bool use_spi_flash,
+		   struct fsp_header **fspp);
+
+/**
+ * fsp_locate_fsp() - Locate an FSP component
+ *
+ * This finds an FSP component by various methods. It is not as general-purpose
+ * as it looks, since it expects FSP-M to be requested in SPL (only), and FSP-S
+ * to be requested in U-Boot proper.
+ *
+ * @type: Component to locate
+ * @entry: Returns location of component
+ * @use_spi_flash: true to read using the Fast SPI driver, false to use
+ *	memory-mapped SPI flash
+ * @devp: Returns northbridge device
+ * @hdrp: Returns FSP header
+ * @rom_offsetp: If non-NULL, returns the offset to add to any image position to
+ *	find the memory-mapped location of that position. For example, for ROM
+ *	position 0x1000, it will be mapped into 0x1000 + *rom_offsetp.
+ */
+int fsp_locate_fsp(enum fsp_type_t type, struct binman_entry *entry,
+		   bool use_spi_flash, struct udevice **devp,
+		   struct fsp_header **hdrp, ulong *rom_offsetp);
+
+/**
+ * arch_fsps_preinit() - Perform init needed before calling FSP-S
+ *
+ * This allows use of probed drivers and PCI so is a convenient place to do any
+ * init that is needed before FSP-S is called. After this, U-Boot relocates and
+ * calls arch_fsp_init_r() before PCI is probed, and that function is not
+ * allowed to probe PCI before calling FSP-S.
+ */
+int arch_fsps_preinit(void);
+
+/**
+ * fspm_update_config() - Set up the config structure for FSP-M
+ *
+ * @dev: Hostbridge device containing config
+ * @upd: Config data to fill in
+ * @return 0 if OK, -ve on error
+ */
+int fspm_update_config(struct udevice *dev, struct fspm_upd *upd);
+
+/**
+ * fspm_done() - Indicate that memory init is complete
+ *
+ * This allows the board to do whatever post-init it needs before things
+ * continue.
+ *
+ * @dev: Hostbridge device
+ * @return 0 if OK, -ve on error
+ */
+int fspm_done(struct udevice *dev);
+
+/**
+ * fsps_update_config() - Set up the config structure for FSP-S
+ *
+ * @dev: Hostbridge device containing config
+ * @rom_offset: Value to add to convert from ROM offset to memory-mapped address
+ * @upd: Config data to fill in
+ * @return 0 if OK, -ve on error
+ */
+int fsps_update_config(struct udevice *dev, ulong rom_offset,
+		       struct fsps_upd *upd);
+
+/**
+ * prepare_mrc_cache() - Read the MRC cache into the product-data struct
+ *
+ * This looks for cached Memory-reference code (MRC) data and stores it into
+ * @upd for use by the FSP-M binary.
+ *
+ * @return 0 if OK, -ENOENT if no data (whereupon the caller can continue and
+ *	expect a slower boot), other -ve value on other error
+ */
+int prepare_mrc_cache(struct fspm_upd *upd);
+
+#endif
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index 7f3ada0..f4c1839 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -10,6 +10,7 @@
 #ifndef __ASSEMBLY__
 
 #include <asm/processor.h>
+#include <asm/mrccache.h>
 
 enum pei_boot_mode_t {
 	PEI_BOOT_NONE = 0,
@@ -66,6 +67,21 @@ struct mtrr_request {
 	uint64_t size;
 };
 
+/**
+ * struct mrc_output - holds the MRC data
+ *
+ * @buf: MRC training data to save for the next boot. This is set to point to
+ *	the raw data after SDRAM init is complete. Then mrccache_setup()
+ *	turns it into a proper cache record with a checksum
+ * @len: Length of @buf
+ * @cache: Resulting cache record
+ */
+struct mrc_output {
+	char *buf;
+	uint len;
+	struct mrc_data_container *cache;
+};
+
 /* Architecture-specific global data */
 struct arch_global_data {
 	u64 gdt[X86_GDT_NUM_ENTRIES] __aligned(16);
@@ -90,12 +106,12 @@ struct arch_global_data {
 	struct mtrr_request mtrr_req[MAX_MTRR_REQUESTS];
 	int mtrr_req_count;
 	int has_mtrr;
-	/* MRC training data to save for the next boot */
-	char *mrc_output;
-	unsigned int mrc_output_len;
+	/* MRC training data */
+	struct mrc_output mrc[MRC_TYPE_COUNT];
 	ulong table;			/* Table pointer from previous loader */
 	int turbo_state;		/* Current turbo state */
 	struct irq_routing_table *pirq_routing_table;
+	int dw_i2c_num_cards;		/* Used by designware i2c driver */
 #ifdef CONFIG_SEABIOS
 	u32 high_table_ptr;
 	u32 high_table_limit;
@@ -104,6 +120,9 @@ struct arch_global_data {
 	int prev_sleep_state;		/* Previous sleep state ACPI_S0/1../5 */
 	ulong backup_mem;		/* Backup memory address for S3 */
 #endif
+#ifdef CONFIG_FSP_VERSION2
+	struct fsp_header *fsp_s_hdr;	/* Pointer to FSP-S header */
+#endif
 };
 
 #endif
diff --git a/arch/x86/include/asm/intel_pinctrl.h b/arch/x86/include/asm/intel_pinctrl.h
new file mode 100644
index 0000000..72fd924
--- /dev/null
+++ b/arch/x86/include/asm/intel_pinctrl.h
@@ -0,0 +1,306 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ * Copyright 2019 Google LLC
+ *
+ * Modified from coreboot gpio.h
+ */
+
+#ifndef __ASM_INTEL_PINCTRL_H
+#define __ASM_INTEL_PINCTRL_H
+
+#include <dm/pinctrl.h>
+
+/**
+ * struct pad_config - config for a pad
+ * @pad: offset of pad within community
+ * @pad_config: Pad config data corresponding to DW0, DW1, etc.
+ */
+struct pad_config {
+	int pad;
+	u32 pad_config[4];
+};
+
+#include <asm/arch/gpio.h>
+
+/* GPIO community IOSF sideband clock gating */
+#define MISCCFG_GPSIDEDPCGEN	BIT(5)
+/* GPIO community RCOMP clock gating */
+#define MISCCFG_GPRCOMPCDLCGEN	BIT(4)
+/* GPIO community RTC clock gating */
+#define MISCCFG_GPRTCDLCGEN	BIT(3)
+/* GFX controller clock gating */
+#define MISCCFG_GSXSLCGEN	BIT(2)
+/* GPIO community partition clock gating */
+#define MISCCFG_GPDPCGEN	BIT(1)
+/* GPIO community local clock gating */
+#define MISCCFG_GPDLCGEN	BIT(0)
+/* Enable GPIO community power management configuration */
+#define MISCCFG_ENABLE_GPIO_PM_CONFIG (MISCCFG_GPSIDEDPCGEN | \
+	MISCCFG_GPRCOMPCDLCGEN | MISCCFG_GPRTCDLCGEN | MISCCFG_GSXSLCGEN \
+	| MISCCFG_GPDPCGEN | MISCCFG_GPDLCGEN)
+
+/*
+ * GPIO numbers may not be contiguous and instead will have a different
+ * starting pin number for each pad group.
+ */
+#define INTEL_GPP_BASE(first_of_community, start_of_group, end_of_group,\
+			group_pad_base)					\
+	{								\
+		.first_pad = (start_of_group) - (first_of_community),	\
+		.size = (end_of_group) - (start_of_group) + 1,		\
+		.acpi_pad_base = (group_pad_base),			\
+	}
+
+/*
+ * A pad base of -1 indicates that this group uses contiguous numbering
+ * and a pad base should not be used for this group.
+ */
+#define PAD_BASE_NONE	-1
+
+/* The common/default group numbering is contiguous */
+#define INTEL_GPP(first_of_community, start_of_group, end_of_group)	\
+	INTEL_GPP_BASE(first_of_community, start_of_group, end_of_group,\
+		       PAD_BASE_NONE)
+
+/**
+ * struct reset_mapping - logical to actual value for PADRSTCFG in DW0
+ *
+ * Note that the values are expected to be within the field placement of the
+ * register itself. i.e. if the reset field is at 31:30 then the values within
+ * logical and chipset should occupy 31:30.
+ */
+struct reset_mapping {
+	u32 logical;
+	u32 chipset;
+};
+
+/**
+ * struct pad_group - describes the groups within each community
+ *
+ * @first_pad: offset of first pad of the group relative to the community
+ * @size: size of the group
+ * @acpi_pad_base: starting pin number for the pads in this group when they are
+ *	used in ACPI.  This is only needed if the pins are not contiguous across
+ *	groups. Most groups will have this set to PAD_BASE_NONE and use
+ *	contiguous numbering for ACPI.
+ */
+struct pad_group {
+	int first_pad;
+	uint size;
+	int acpi_pad_base;
+};
+
+/**
+ * struct pad_community - community of pads
+ *
+ * This describes a community, or each group within a community when multiple
+ * groups exist inside a community
+ *
+ * @name: Community name
+ * @acpi_path: ACPI path
+ * @num_gpi_regs: number of gpi registers in community
+ * @max_pads_per_group: number of pads in each group; number of pads bit-mapped
+ *	in each GPI status/en and Host Own Reg
+ * @first_pad: first pad in community
+ * @last_pad: last pad in community
+ * @host_own_reg_0: offset to Host Ownership Reg 0
+ * @gpi_int_sts_reg_0: offset to GPI Int STS Reg 0
+ * @gpi_int_en_reg_0: offset to GPI Int Enable Reg 0
+ * @gpi_smi_sts_reg_0: offset to GPI SMI STS Reg 0
+ * @gpi_smi_en_reg_0: offset to GPI SMI EN Reg 0
+ * @pad_cfg_base: offset to first PAD_GFG_DW0 Reg
+ * @gpi_status_offset: specifies offset in struct gpi_status
+ * @port: PCR Port ID
+ * @reset_map: PADRSTCFG logical to chipset mapping
+ * @num_reset_vals: number of values in @reset_map
+ * @groups; list of groups for this community
+ * @num_groups: number of groups
+ */
+struct pad_community {
+	const char *name;
+	const char *acpi_path;
+	size_t num_gpi_regs;
+	size_t max_pads_per_group;
+	uint first_pad;
+	uint last_pad;
+	u16 host_own_reg_0;
+	u16 gpi_int_sts_reg_0;
+	u16 gpi_int_en_reg_0;
+	u16 gpi_smi_sts_reg_0;
+	u16 gpi_smi_en_reg_0;
+	u16 pad_cfg_base;
+	u8 gpi_status_offset;
+	u8 port;
+	const struct reset_mapping *reset_map;
+	size_t num_reset_vals;
+	const struct pad_group *groups;
+	size_t num_groups;
+};
+
+/**
+ * struct intel_pinctrl_priv - private data for each pinctrl device
+ *
+ * @comm: Pad community for this device
+ * @num_cfgs: Number of configuration words for each pad
+ * @itss: ITSS device (for interrupt handling)
+ * @itss_pol_cfg: Use to program Interrupt Polarity Control (IPCx) register
+ *	Each bit represents IRQx Active High Polarity Disable configuration:
+ *	when set to 1, the interrupt polarity associated with IRQx is inverted
+ *	to appear as Active Low to IOAPIC and vice versa
+ */
+struct intel_pinctrl_priv {
+	const struct pad_community *comm;
+	int num_cfgs;
+	struct udevice *itss;
+	bool itss_pol_cfg;
+};
+
+/* Exported common operations for the pinctrl driver */
+extern const struct pinctrl_ops intel_pinctrl_ops;
+
+/* Exported common probe function for the pinctrl driver */
+int intel_pinctrl_probe(struct udevice *dev);
+
+/**
+ * intel_pinctrl_ofdata_to_platdata() - Handle common platdata setup
+ *
+ * @dev: Pinctrl device
+ * @comm: Pad community for this device
+ * @num_cfgs: Number of configuration words for each pad
+ * @return 0 if OK, -EDOM if @comm is NULL, other -ve value on other error
+ */
+int intel_pinctrl_ofdata_to_platdata(struct udevice *dev,
+				     const struct pad_community *comm,
+				     int num_cfgs);
+
+/**
+ * pinctrl_route_gpe() - set GPIO groups for the general-purpose-event blocks
+ *
+ * The values from PMC register GPE_CFG are passed which is then mapped to
+ * proper groups for MISCCFG. This basically sets the MISCCFG register bits:
+ *  dw0 = gpe0_route[11:8]. This is ACPI GPE0b.
+ *  dw1 = gpe0_route[15:12]. This is ACPI GPE0c.
+ *  dw2 = gpe0_route[19:16]. This is ACPI GPE0d.
+ *
+ * @dev: ITSS device
+ * @gpe0b: Value for GPE0B
+ * @gpe0c: Value for GPE0C
+ * @gpe0d: Value for GPE0D
+ * @return 0 if OK, -ve on error
+ */
+int pinctrl_route_gpe(struct udevice *dev, uint gpe0b, uint gpe0c, uint gpe0d);
+
+/**
+ * pinctrl_config_pads() - Configure a list of pads
+ *
+ * Configures multiple pads using the provided data from the device tree.
+ *
+ * @dev: pinctrl device (any will do)
+ * @pads: Pad data, consisting of a pad number followed by num_cfgs entries
+ *	containing the data for that pad (num_cfgs is set by the pinctrl device)
+ * @pads_count: Number of pads to configure
+ * @return 0 if OK, -ve on error
+ */
+int pinctrl_config_pads(struct udevice *dev, u32 *pads, int pads_count);
+
+/**
+ * pinctrl_gpi_clear_int_cfg() - Set up the interrupts for use
+ *
+ * This enables the interrupt inputs and clears the status register bits
+ *
+ * @return 0 if OK, -ve on error
+ */
+int pinctrl_gpi_clear_int_cfg(void);
+
+/**
+ * pinctrl_config_pads_for_node() - Configure pads
+ *
+ * Set up the pads using the data in a given node
+ *
+ * @dev: pinctrl device (any will do)
+ * @node: Node containing the 'pads' property with the data in it
+ * @return 0 if OK, -ve on error
+ */
+int pinctrl_config_pads_for_node(struct udevice *dev, ofnode node);
+
+/**
+ * pinctrl_read_pads() - Read pad data from a node
+ *
+ * @dev: pinctrl device (any will do, it is just used to get config)
+ * @node: Node to read pad data from
+ * @prop: Property name to use (e.g. "pads")
+ * @padsp: Returns a pointer to an allocated array of pad data, in the format:
+ *	<pad>
+ *	<pad_config0>
+ *	<pad_config1>
+ *	...
+ *
+ *	The number of pad config values is set by the pinctrl controller.
+ *	The caller must free this array.
+ * @pad_countp: Returns the number of pads read
+ * @ereturn 0 if OK, -ve on error
+ */
+int pinctrl_read_pads(struct udevice *dev, ofnode node, const char *prop,
+		      u32 **padsp, int *pad_countp);
+
+/**
+ * pinctrl_count_pads() - Count the number of pads in a pad array
+ *
+ * This used used with of-platdata where the array may be smaller than its
+ * maximum size. This function searches for the last pad in the array by finding
+ * the first 'zero' record
+ *
+ * This works out the number of records in the array. Each record has one word
+ * for the pad and num_cfgs words for the config.
+ *
+ * @dev: pinctrl device (any will do)
+ * @pads: Array of pad data
+ * @size: Size of pad data in bytes
+ * @return number of pads represented by the data
+ */
+int pinctrl_count_pads(struct udevice *dev, u32 *pads, int size);
+
+/**
+ * intel_pinctrl_get_config_reg_addr() - Get address of the pin config registers
+ *
+ * @dev: Pinctrl device
+ * @offset: GPIO offset within this device
+ * @return register offset within the GPIO p2sb region
+ */
+u32 intel_pinctrl_get_config_reg_addr(struct udevice *dev, uint offset);
+
+/**
+ * intel_pinctrl_get_config_reg() - Get the value of a GPIO register
+ *
+ * @dev: Pinctrl device
+ * @offset: GPIO offset within this device
+ * @return register value within the GPIO p2sb region
+ */
+u32 intel_pinctrl_get_config_reg(struct udevice *dev, uint offset);
+
+/**
+ * intel_pinctrl_get_pad() - Get pad information for a pad
+ *
+ * This is used by the GPIO controller to find the pinctrl used by a pad.
+ *
+ * @pad: Pad to check
+ * @devp: Returns pinctrl device containing that pad
+ * @offsetp: Returns offset of pad within that pinctrl device
+ */
+int intel_pinctrl_get_pad(uint pad, struct udevice **devp, uint *offsetp);
+
+/**
+ * intel_pinctrl_get_acpi_pin() - Get the ACPI pin for a pinctrl pin
+ *
+ * Maps a pinctrl pin (in terms of its offset within the pins controlled by that
+ * pinctrl) to an ACPI GPIO pin-table entry.
+ *
+ * @dev: Pinctrl device to check
+ * @offset: Offset of pin within that device (0 = first)
+ * @return associated ACPI GPIO pin-table entry, or standard pin number if the
+ *	ACPI pad base is not set
+ */
+int intel_pinctrl_get_acpi_pin(struct udevice *dev, uint offset);
+
+#endif
diff --git a/arch/x86/include/asm/intel_pinctrl_defs.h b/arch/x86/include/asm/intel_pinctrl_defs.h
new file mode 100644
index 0000000..6da06bb
--- /dev/null
+++ b/arch/x86/include/asm/intel_pinctrl_defs.h
@@ -0,0 +1,373 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015-2016 Intel Corp.
+ * Copyright 2019 Google LLC
+ *
+ * Modified from coreboot gpio_defs.h
+ */
+
+#ifndef _ASM_INTEL_PINCTRL_DEFS_H_
+#define _ASM_INTEL_PINCTRL_DEFS_H_
+
+/* This file is included by device trees, so avoid BIT() macros */
+
+#define PAD_CFG0_TX_STATE_BIT		0
+#define PAD_CFG0_TX_STATE		(1 << PAD_CFG0_TX_STATE_BIT)
+#define PAD_CFG0_RX_STATE_BIT		1
+#define PAD_CFG0_RX_STATE		(1 << PAD_CFG0_RX_STATE_BIT)
+#define PAD_CFG0_TX_DISABLE		(1 << 8)
+#define PAD_CFG0_RX_DISABLE		(1 << 9)
+
+#define PAD_CFG0_MODE_SHIFT		10
+#define PAD_CFG0_MODE_MASK		(7 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_GPIO		(0 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF1		(1 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF2		(2 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF3		(3 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF4		(4 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF5		(5 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF6		(6 << PAD_CFG0_MODE_SHIFT)
+
+#define PAD_CFG0_ROUTE_MASK		(0xf << 17)
+#define  PAD_CFG0_ROUTE_NMI		(1 << 17)
+#define  PAD_CFG0_ROUTE_SMI		(1 << 18)
+#define  PAD_CFG0_ROUTE_SCI		(1 << 19)
+#define  PAD_CFG0_ROUTE_IOAPIC		(1 << 20)
+#define PAD_CFG0_RXTENCFG_MASK		(3 << 21)
+#define PAD_CFG0_RXINV_MASK		(1 << 23)
+#define  PAD_CFG0_RX_POL_INVERT		(1 << 23)
+#define  PAD_CFG0_RX_POL_NONE		(0 << 23)
+#define  PAD_CFG0_PREGFRXSEL		(1 << 24)
+#define PAD_CFG0_TRIG_MASK		(3 << 25)
+#define  PAD_CFG0_TRIG_LEVEL		(0 << 25)
+#define  PAD_CFG0_TRIG_EDGE_SINGLE	(1 << 25) /* controlled by RX_INVERT*/
+#define  PAD_CFG0_TRIG_OFF		(2 << 25)
+#define  PAD_CFG0_TRIG_EDGE_BOTH	(3 << 25)
+#define PAD_CFG0_RXRAW1_MASK		(1 << 28)
+#define PAD_CFG0_RXPADSTSEL_MASK	(1 << 29)
+#define PAD_CFG0_RESET_MASK		(3 << 30)
+#define  PAD_CFG0_LOGICAL_RESET_PWROK	(0U << 30)
+#define  PAD_CFG0_LOGICAL_RESET_DEEP	(1U << 30)
+#define  PAD_CFG0_LOGICAL_RESET_PLTRST	(2U << 30)
+#define  PAD_CFG0_LOGICAL_RESET_RSMRST	(3U << 30)
+
+/*
+ * Use the fourth bit in IntSel field to indicate gpio ownership. This field is
+ * RO and hence not used during gpio configuration.
+ */
+#define PAD_CFG1_GPIO_DRIVER		(0x1 << 4)
+#define PAD_CFG1_IRQ_MASK		(0xff << 0)
+#define PAD_CFG1_IOSTERM_MASK		(0x3 << 8)
+#define PAD_CFG1_IOSTERM_SAME		(0x0 << 8)
+#define PAD_CFG1_IOSTERM_DISPUPD	(0x1 << 8)
+#define PAD_CFG1_IOSTERM_ENPD		(0x2 << 8)
+#define PAD_CFG1_IOSTERM_ENPU		(0x3 << 8)
+#define PAD_CFG1_PULL_MASK		(0xf << 10)
+#define  PAD_CFG1_PULL_NONE		(0x0 << 10)
+#define  PAD_CFG1_PULL_DN_5K		(0x2 << 10)
+#define  PAD_CFG1_PULL_DN_20K		(0x4 << 10)
+#define  PAD_CFG1_PULL_UP_1K		(0x9 << 10)
+#define  PAD_CFG1_PULL_UP_5K		(0xa << 10)
+#define  PAD_CFG1_PULL_UP_2K		(0xb << 10)
+#define  PAD_CFG1_PULL_UP_20K		(0xc << 10)
+#define  PAD_CFG1_PULL_UP_667		(0xd << 10)
+#define  PAD_CFG1_PULL_NATIVE		(0xf << 10)
+
+/* Tx enabled driving last value driven, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TX_LAST_RXE	(0x0 << 14)
+/*
+ * Tx enabled driving 0, Rx disabled and Rx driving 0 back to its controller
+ * internally
+ */
+#define PAD_CFG1_IOSSTATE_TX0_RX_DCR_X0	(0x1 << 14)
+/*
+ * Tx enabled driving 0, Rx disabled and Rx driving 1 back to its controller
+ * internally
+ */
+#define PAD_CFG1_IOSSTATE_TX0_RX_DCR_X1	(0x2 << 14)
+/*
+ * Tx enabled driving 1, Rx disabled and Rx driving 0 back to its controller
+ * internally
+ */
+#define PAD_CFG1_IOSSTATE_TX1_RX_DCR_X0	(0x3 << 14)
+/*
+ * Tx enabled driving 1, Rx disabled and Rx driving 1 back to its controller
+ * internally
+ */
+#define PAD_CFG1_IOSSTATE_TX1_RX_DCR_X1	(0x4 << 14)
+/* Tx enabled driving 0, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TX0_RXE	(0x5 << 14)
+/* Tx enabled driving 1, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TX1_RXE	(0x6 << 14)
+/* Hi-Z, Rx driving 0 back to its controller internally */
+#define PAD_CFG1_IOSSTATE_HIZCRX0	(0x7 << 14)
+/* Hi-Z, Rx driving 1 back to its controller internally */
+#define PAD_CFG1_IOSSTATE_HIZCRX1	(0x8 << 14)
+/* Tx disabled, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TXD_RXE	(0x9 << 14)
+#define PAD_CFG1_IOSSTATE_IGNORE	(0xf << 14) /* Ignore Iostandby */
+/* mask to extract Iostandby bits */
+#define PAD_CFG1_IOSSTATE_MASK		(0xf << 14)
+#define PAD_CFG1_IOSSTATE_SHIFT		14 /* set Iostandby bits [17:14] */
+
+#define PAD_CFG2_DEBEN			1
+/* Debounce Duration = (2 ^ PAD_CFG2_DEBOUNCE_x_RTC) * RTC clock duration */
+#define PAD_CFG2_DEBOUNCE_8_RTC		(0x3 << 1)
+#define PAD_CFG2_DEBOUNCE_16_RTC	(0x4 << 1)
+#define PAD_CFG2_DEBOUNCE_32_RTC	(0x5 << 1)
+#define PAD_CFG2_DEBOUNCE_64_RTC	(0x6 << 1)
+#define PAD_CFG2_DEBOUNCE_128_RTC	(0x7 << 1)
+#define PAD_CFG2_DEBOUNCE_256_RTC	(0x8 << 1)
+#define PAD_CFG2_DEBOUNCE_512_RTC	(0x9 << 1)
+#define PAD_CFG2_DEBOUNCE_1K_RTC	(0xa << 1)
+#define PAD_CFG2_DEBOUNCE_2K_RTC	(0xb << 1)
+#define PAD_CFG2_DEBOUNCE_4K_RTC	(0xc << 1)
+#define PAD_CFG2_DEBOUNCE_8K_RTC	(0xd << 1)
+#define PAD_CFG2_DEBOUNCE_16K_RTC	(0xe << 1)
+#define PAD_CFG2_DEBOUNCE_32K_RTC	(0xf << 1)
+#define PAD_CFG2_DEBOUNCE_MASK		0x1f
+
+/* voltage tolerance  0=3.3V default 1=1.8V tolerant */
+#if IS_ENABLED(INTEL_PINCTRL_IOSTANDBY)
+#define PAD_CFG1_TOL_MASK		(0x1 << 25)
+#define  PAD_CFG1_TOL_1V8		(0x1 << 25)
+#endif
+
+#define PAD_FUNC(value)		PAD_CFG0_MODE_##value
+#define PAD_RESET(value)	PAD_CFG0_LOGICAL_RESET_##value
+#define PAD_PULL(value)		PAD_CFG1_PULL_##value
+
+#define PAD_IOSSTATE(value)	PAD_CFG1_IOSSTATE_##value
+#define PAD_IOSTERM(value)	PAD_CFG1_IOSTERM_##value
+
+#define PAD_IRQ_CFG(route, trig, inv) \
+				(PAD_CFG0_ROUTE_##route | \
+				PAD_CFG0_TRIG_##trig | \
+				PAD_CFG0_RX_POL_##inv)
+
+#if IS_ENABLED(INTEL_PINCTRL_DUAL_ROUTE_SUPPORT)
+#define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv)  \
+				(PAD_CFG0_ROUTE_##route1 | \
+				PAD_CFG0_ROUTE_##route2 | \
+				PAD_CFG0_TRIG_##trig | \
+				PAD_CFG0_RX_POL_##inv)
+#endif /* CONFIG_INTEL_PINCTRL_DUAL_ROUTE_SUPPORT */
+
+#define _PAD_CFG_STRUCT(__pad, __config0, __config1)	\
+		__pad(__config0) (__config1)
+
+/* Native function configuration */
+#define PAD_CFG_NF(pad, pull, rst, func) \
+	_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TX_LAST_RXE))
+
+#if IS_ENABLED(CONFIG_INTEL_GPIO_PADCFG_PADTOL)
+/*
+ * Native 1.8V tolerant pad, only applies to some pads like I2C/I2S. Not
+ * applicable to all SOCs. Refer EDS.
+ */
+#define PAD_CFG_NF_1V8(pad, pull, rst, func) \
+	_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) |\
+		PAD_IOSSTATE(TX_LAST_RXE) | PAD_CFG1_TOL_1V8)
+#endif
+
+/* Native function configuration for standby state */
+#define PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, iosstate) \
+	_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+		PAD_IOSSTATE(iosstate))
+
+/*
+ * Native function configuration for standby state, also configuring iostandby
+ * as masked
+ */
+#define PAD_CFG_NF_IOSTANDBY_IGNORE(pad, pull, rst, func) \
+	_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+		PAD_IOSSTATE(IGNORE))
+
+/*
+ * Native function configuration for standby state, also configuring iosstate
+ * and iosterm
+ */
+#define PAD_CFG_NF_IOSSTATE_IOSTERM(pad, pull, rst, func, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+/* General purpose output, no pullup/down */
+#define PAD_CFG_GPO(pad, val, rst)	\
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+		PAD_PULL(NONE) | PAD_IOSSTATE(TX_LAST_RXE))
+
+/* General purpose output, with termination specified */
+#define PAD_CFG_TERM_GPO(pad, val, pull, rst)	\
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+		PAD_PULL(pull) | PAD_IOSSTATE(TX_LAST_RXE))
+
+/* General purpose output, no pullup/down */
+#define PAD_CFG_GPO_GPIO_DRIVER(pad, val, rst, pull)	\
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+		PAD_PULL(pull) | PAD_IOSSTATE(TX_LAST_RXE) | \
+			PAD_CFG1_GPIO_DRIVER)
+
+/* General purpose output */
+#define PAD_CFG_GPO_IOSSTATE_IOSTERM(pad, val, rst, pull, iosstate, ioterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+		PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(ioterm))
+
+/* General purpose input */
+#define PAD_CFG_GPI(pad, pull, rst) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
+		PAD_PULL(pull) | PAD_IOSSTATE(TXD_RXE))
+
+/* General purpose input. The following macro sets the
+ * Host Software Pad Ownership to GPIO Driver mode.
+ */
+#define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
+		PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TXD_RXE))
+
+#define PAD_CFG_GPIO_DRIVER_HI_Z(pad, pull, rst, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE |	\
+		PAD_CFG0_RX_DISABLE,					\
+		PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER |			\
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+#define PAD_CFG_GPIO_HI_Z(pad, pull, rst, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE |	\
+		PAD_CFG0_RX_DISABLE, PAD_PULL(pull) |			\
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+/* GPIO Interrupt */
+#define PAD_CFG_GPI_INT(pad, pull, rst, trig) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE |	\
+			PAD_CFG0_TRIG_##trig | PAD_CFG0_RX_POL_NONE,	\
+		PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TXD_RXE))
+
+/*
+ * No Connect configuration for unused pad.
+ * Both TX and RX are disabled. RX disabling is done to avoid unnecessary
+ * setting of GPI_STS.
+ */
+#define PAD_NC(pad, pull)			\
+	_PAD_CFG_STRUCT(pad,					\
+		PAD_FUNC(GPIO) | PAD_RESET(DEEP) |		\
+		PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE,	\
+		PAD_PULL(pull) | PAD_IOSSTATE(TXD_RXE))
+
+/* General purpose input, routed to APIC */
+#define PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TXD_RXE))
+
+/* General purpose input, routed to APIC - with IOStandby Config*/
+#define PAD_CFG_GPI_APIC_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+/*
+ * The following APIC macros assume the APIC will handle the filtering
+ * on its own end. One just needs to pass an active high message into the
+ * ITSS.
+ */
+#define PAD_CFG_GPI_APIC_LOW(pad, pull, rst) \
+	PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, INVERT)
+
+#define PAD_CFG_GPI_APIC_HIGH(pad, pull, rst) \
+	PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, NONE)
+
+#define PAD_CFG_GPI_APIC_EDGE_LOW(pad, pull, rst) \
+	PAD_CFG_GPI_APIC(pad, pull, rst, EDGE_SINGLE, INVERT)
+
+/* General purpose input, routed to SMI */
+#define PAD_CFG_GPI_SMI(pad, pull, rst, trig, inv) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TXD_RXE))
+
+/* General purpose input, routed to SMI */
+#define PAD_CFG_GPI_SMI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+#define PAD_CFG_GPI_SMI_LOW(pad, pull, rst, trig) \
+	PAD_CFG_GPI_SMI(pad, pull, rst, trig, INVERT)
+
+#define PAD_CFG_GPI_SMI_HIGH(pad, pull, rst, trig) \
+	PAD_CFG_GPI_SMI(pad, pull, rst, trig, NONE)
+
+/* General purpose input, routed to SCI */
+#define PAD_CFG_GPI_SCI(pad, pull, rst, trig, inv) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TXD_RXE))
+
+/* General purpose input, routed to SCI */
+#define PAD_CFG_GPI_SCI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+#define PAD_CFG_GPI_SCI_LOW(pad, pull, rst, trig) \
+	PAD_CFG_GPI_SCI(pad, pull, rst, trig, INVERT)
+
+#define PAD_CFG_GPI_SCI_HIGH(pad, pull, rst, trig) \
+	PAD_CFG_GPI_SCI(pad, pull, rst, trig, NONE)
+
+#define PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, inv, dur) \
+	_PAD_CFG_STRUCT_3(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TXD_RXE), PAD_CFG2_DEBEN | PAD_CFG2_##dur)
+
+#define PAD_CFG_GPI_SCI_LOW_DEBEN(pad, pull, rst, trig, dur) \
+	PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, INVERT, dur)
+
+#define PAD_CFG_GPI_SCI_HIGH_DEBEN(pad, pull, rst, trig, dur) \
+	PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, NONE, dur)
+
+/* General purpose input, routed to NMI */
+#define PAD_CFG_GPI_NMI(pad, pull, rst, trig, inv) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TXD_RXE))
+
+#if IS_ENABLED(INTEL_PINCTRL_DUAL_ROUTE_SUPPORT)
+/* GPI, GPIO Driver, SCI interrupt */
+#define PAD_CFG_GPI_GPIO_DRIVER_SCI(pad, pull, rst, trig, inv)	\
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+			PAD_IRQ_CFG(SCI, trig, inv),	\
+		PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TXD_RXE))
+
+#define PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2) \
+	_PAD_CFG_STRUCT(pad,						\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG_DUAL_ROUTE(route1, route2,  trig, inv), \
+		PAD_PULL(pull) | PAD_IOSSTATE(TXD_RXE))
+
+#define PAD_CFG_GPI_IRQ_WAKE(pad, pull, rst, trig, inv)	\
+	PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, IOAPIC, SCI)
+
+#endif /* CONFIG_INTEL_PINCTRL_DUAL_ROUTE_SUPPORT */
+
+#endif /* _ASM_INTEL_PINCTRL_DEFS_H_ */
diff --git a/arch/x86/include/asm/lpss.h b/arch/x86/include/asm/lpss.h
new file mode 100644
index 0000000..7814872
--- /dev/null
+++ b/arch/x86/include/asm/lpss.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef __ASM_LPSS_H
+#define __ASM_LPSS_H
+
+struct udevice;
+
+/* D0 and D3 enable config */
+enum lpss_pwr_state {
+	STATE_D0 = 0,
+	STATE_D3 = 3
+};
+
+/**
+ * lpss_reset_release() - Release device from reset
+ *
+ * This is used for devices which have LPSS support.
+ *
+ * @regs: Pointer to device registers
+ */
+void lpss_reset_release(void *regs);
+
+/**
+ * lpss_set_power_state() - Change power state of a device
+ *
+ * This is used for devices which have LPSS support.
+ *
+ * @dev: Device to update
+ * @state: New power state to set
+ */
+void lpss_set_power_state(struct udevice *dev, enum lpss_pwr_state state);
+
+#endif
diff --git a/arch/x86/include/asm/mrccache.h b/arch/x86/include/asm/mrccache.h
index 40fda85..d6b7529 100644
--- a/arch/x86/include/asm/mrccache.h
+++ b/arch/x86/include/asm/mrccache.h
@@ -7,7 +7,7 @@
 #ifndef _ASM_MRCCACHE_H
 #define _ASM_MRCCACHE_H
 
-#define MRC_DATA_ALIGN		0x1000
+#define MRC_DATA_ALIGN		0x100
 #define MRC_DATA_SIGNATURE	(('M' << 0) | ('R' << 8) | \
 				 ('C' << 16) | ('D'<<24))
 
@@ -27,6 +27,14 @@ struct mrc_region {
 	u32	length;
 };
 
+/* Types of MRC data */
+enum mrc_type_t {
+	MRC_TYPE_NORMAL,
+	MRC_TYPE_VAR,
+
+	MRC_TYPE_COUNT,
+};
+
 struct udevice;
 
 /**
@@ -41,21 +49,6 @@ struct udevice;
 struct mrc_data_container *mrccache_find_current(struct mrc_region *entry);
 
 /**
- * mrccache_update() - update the MRC cache with a new record
- *
- * This writes a new record to the end of the MRC cache region. If the new
- * record is the same as the latest record then the write is skipped
- *
- * @sf:		SPI flash to write to
- * @entry:	Position and size of MRC cache in SPI flash
- * @cur:	Record to write
- * @return 0 if updated, -EEXIST if the record is the same as the latest
- * record, -EINVAL if the record is not valid, other error if SPI write failed
- */
-int mrccache_update(struct udevice *sf, struct mrc_region *entry,
-		    struct mrc_data_container *cur);
-
-/**
  * mrccache_reserve() - reserve MRC data on the stack
  *
  * This copies MRC data pointed by gd->arch.mrc_output to a new place on the
@@ -84,6 +77,7 @@ int mrccache_reserve(void);
  *   triggers PCI bus enumeration during which insufficient memory issue
  *   might be exposed and it causes subsequent SPI flash probe fails).
  *
+ * @type:	Type of MRC data to use
  * @devp:	Returns pointer to the SPI flash device
  * @entry:	Position and size of MRC cache in SPI flash
  * @return 0 if success, -ENOENT if SPI flash node does not exist in the
@@ -91,7 +85,8 @@ int mrccache_reserve(void);
  * tree, -EINVAL if MRC region properties format is incorrect, other error
  * if SPI flash probe failed.
  */
-int mrccache_get_region(struct udevice **devp, struct mrc_region *entry);
+int mrccache_get_region(enum mrc_type_t type, struct udevice **devp,
+			struct mrc_region *entry);
 
 /**
  * mrccache_save() - save MRC data to the SPI flash
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 5bc8b6c..246c14f 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -70,6 +70,7 @@
 #define MSR_IA32_BBL_CR_CTL		0x00000119
 #define MSR_IA32_BBL_CR_CTL3		0x0000011e
 #define MSR_POWER_MISC			0x00000120
+#define  FLUSH_DL1_L2			(1 << 8)
 #define ENABLE_ULFM_AUTOCM_MASK		(1 << 2)
 #define ENABLE_INDP_AUTOCM_MASK		(1 << 3)
 
@@ -241,10 +242,17 @@
 #define  PKG_POWER_LIMIT_CLAMP		(1 << 16)
 #define  PKG_POWER_LIMIT_TIME_SHIFT	17
 #define  PKG_POWER_LIMIT_TIME_MASK	0x7f
+/*
+ * For Mobile, RAPL default PL1 time window value set to 28 seconds.
+ * RAPL time window calculation defined as follows:
+ * Time Window = (float)((1+X/4)*(2*^Y), X Corresponds to [23:22],
+ * Y to [21:17] in MSR 0x610. 28 sec is equal to 0x6e.
+ */
+#define  MB_POWER_LIMIT1_TIME_DEFAULT	0x6e
 
 #define MSR_PKG_ENERGY_STATUS		0x00000611
 #define MSR_PKG_PERF_STATUS		0x00000613
-#define MSR_PKG_POWER_INFO		0x00000614
+#define MSR_PKG_POWER_SKU		0x614
 
 #define MSR_DRAM_POWER_LIMIT		0x00000618
 #define MSR_DRAM_ENERGY_STATUS		0x00000619
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index f1d9977..d7b6836 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -25,8 +25,6 @@
 /* Length of the public header on Intel microcode blobs */
 #define UCODE_HEADER_LEN	0x30
 
-#ifndef __ASSEMBLY__
-
 /*
  * This register is documented in (for example) the Intel Atom Processor E3800
  * Product Family Datasheet in "PCU - Power Management Controller (PMC)".
@@ -37,11 +35,11 @@
  */
 #define IO_PORT_RESET		0xcf9
 
-enum {
-	SYS_RST		= 1 << 1,	/* 0 for soft reset, 1 for hard reset */
-	RST_CPU		= 1 << 2,	/* initiate reset */
-	FULL_RST	= 1 << 3,	/* full power cycle */
-};
+#define SYS_RST		(1 << 1)	/* 0 for soft reset, 1 for hard reset */
+#define RST_CPU		(1 << 2)	/* initiate reset */
+#define FULL_RST	(1 << 3)	/* full power cycle */
+
+#ifndef __ASSEMBLY__
 
 static inline __attribute__((always_inline)) void cpu_hlt(void)
 {
diff --git a/arch/x86/include/asm/spl.h b/arch/x86/include/asm/spl.h
index 1bef487..cc6cac0 100644
--- a/arch/x86/include/asm/spl.h
+++ b/arch/x86/include/asm/spl.h
@@ -11,6 +11,7 @@
 
 enum {
 	BOOT_DEVICE_SPI_MMAP	= 10,
+	BOOT_DEVICE_FAST_SPI,
 	BOOT_DEVICE_CROS_VBOOT,
 };
 
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index ca0ca10..5cd4587 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -4,9 +4,11 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 
 ifndef CONFIG_X86_64
+ifndef CONFIG_TPL_BUILD
 obj-y += bios.o
 obj-y += bios_asm.o
 obj-y += bios_interrupts.o
+endif
 obj-y += string.o
 endif
 ifndef CONFIG_SPL_BUILD
diff --git a/arch/x86/lib/fsp/Makefile b/arch/x86/lib/fsp/Makefile
index 9e34856..da6c0a8 100644
--- a/arch/x86/lib/fsp/Makefile
+++ b/arch/x86/lib/fsp/Makefile
@@ -4,4 +4,7 @@
 
 obj-y += fsp_common.o
 obj-y += fsp_dram.o
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_VIDEO_FSP) += fsp_graphics.o
+endif
 obj-y += fsp_support.o
diff --git a/arch/x86/lib/fsp/fsp_common.c b/arch/x86/lib/fsp/fsp_common.c
index a5efe35..5eff0f9 100644
--- a/arch/x86/lib/fsp/fsp_common.c
+++ b/arch/x86/lib/fsp/fsp_common.c
@@ -58,26 +58,6 @@ void board_final_cleanup(void)
 		debug("OK\n");
 }
 
-void *fsp_prepare_mrc_cache(void)
-{
-	struct mrc_data_container *cache;
-	struct mrc_region entry;
-	int ret;
-
-	ret = mrccache_get_region(NULL, &entry);
-	if (ret)
-		return NULL;
-
-	cache = mrccache_find_current(&entry);
-	if (!cache)
-		return NULL;
-
-	debug("%s: mrc cache at %p, size %x checksum %04x\n", __func__,
-	      cache->data, cache->data_size, cache->checksum);
-
-	return cache->data;
-}
-
 #ifdef CONFIG_HAVE_ACPI_RESUME
 int fsp_save_s3_stack(void)
 {
diff --git a/arch/x86/lib/fsp/fsp_dram.c b/arch/x86/lib/fsp/fsp_dram.c
index bc456bb..9ce0ddf 100644
--- a/arch/x86/lib/fsp/fsp_dram.c
+++ b/arch/x86/lib/fsp/fsp_dram.c
@@ -9,6 +9,7 @@
 #include <asm/fsp/fsp_support.h>
 #include <asm/e820.h>
 #include <asm/mrccache.h>
+#include <asm/mtrr.h>
 #include <asm/post.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -38,8 +39,40 @@ int fsp_scan_for_ram_size(void)
 
 int dram_init_banksize(void)
 {
+	const struct hob_header *hdr;
+	struct hob_res_desc *res_desc;
+	phys_addr_t low_end;
+	uint bank;
+
+	low_end = 0;
+	for (bank = 1, hdr = gd->arch.hob_list;
+	     bank < CONFIG_NR_DRAM_BANKS && !end_of_hob(hdr);
+	     hdr = get_next_hob(hdr)) {
+		if (hdr->type != HOB_TYPE_RES_DESC)
+			continue;
+		res_desc = (struct hob_res_desc *)hdr;
+		if (res_desc->type != RES_SYS_MEM &&
+		    res_desc->type != RES_MEM_RESERVED)
+			continue;
+		if (res_desc->phys_start < (1ULL << 32)) {
+			low_end = max(low_end,
+				      res_desc->phys_start + res_desc->len);
+			continue;
+		}
+
+		gd->bd->bi_dram[bank].start = res_desc->phys_start;
+		gd->bd->bi_dram[bank].size = res_desc->len;
+		mtrr_add_request(MTRR_TYPE_WRBACK, res_desc->phys_start,
+				 res_desc->len);
+		log_debug("ram %llx %llx\n", gd->bd->bi_dram[bank].start,
+			  gd->bd->bi_dram[bank].size);
+	}
+
+	/* Add the memory below 4GB */
 	gd->bd->bi_dram[0].start = 0;
-	gd->bd->bi_dram[0].size = gd->ram_size;
+	gd->bd->bi_dram[0].size = low_end;
+
+	mtrr_add_request(MTRR_TYPE_WRBACK, 0, low_end);
 
 	return 0;
 }
diff --git a/arch/x86/lib/fsp1/fsp_graphics.c b/arch/x86/lib/fsp/fsp_graphics.c
index 52e7133..226c7e6 100644
--- a/arch/x86/lib/fsp1/fsp_graphics.c
+++ b/arch/x86/lib/fsp/fsp_graphics.c
@@ -7,7 +7,8 @@
 #include <dm.h>
 #include <vbe.h>
 #include <video.h>
-#include <asm/fsp1/fsp_support.h>
+#include <asm/fsp/fsp_support.h>
+#include <asm/mtrr.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -97,6 +98,9 @@ static int fsp_video_probe(struct udevice *dev)
 	if (ret)
 		goto err;
 
+	mtrr_add_request(MTRR_TYPE_WRCOMB, vesa->phys_base_ptr, 256 << 20);
+	mtrr_commit(true);
+
 	printf("%dx%dx%d\n", uc_priv->xsize, uc_priv->ysize,
 	       vesa->bits_per_pixel);
 
diff --git a/arch/x86/lib/fsp/fsp_support.c b/arch/x86/lib/fsp/fsp_support.c
index 983888f..ee22811 100644
--- a/arch/x86/lib/fsp/fsp_support.c
+++ b/arch/x86/lib/fsp/fsp_support.c
@@ -5,7 +5,7 @@
  */
 
 #include <common.h>
-#include <asm/fsp1/fsp_support.h>
+#include <asm/fsp/fsp_support.h>
 #include <asm/post.h>
 
 u32 fsp_get_usable_lowmem_top(const void *hob_list)
diff --git a/arch/x86/lib/fsp1/Makefile b/arch/x86/lib/fsp1/Makefile
index 870de71..1cf5e54 100644
--- a/arch/x86/lib/fsp1/Makefile
+++ b/arch/x86/lib/fsp1/Makefile
@@ -5,5 +5,4 @@
 obj-y += fsp_car.o
 obj-y += fsp_common.o
 obj-y += fsp_dram.o
-obj-$(CONFIG_VIDEO_FSP) += fsp_graphics.o
 obj-y += fsp_support.o
diff --git a/arch/x86/lib/fsp1/fsp_common.c b/arch/x86/lib/fsp1/fsp_common.c
index e8066d8..ec9c218 100644
--- a/arch/x86/lib/fsp1/fsp_common.c
+++ b/arch/x86/lib/fsp1/fsp_common.c
@@ -18,6 +18,26 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static void *fsp_prepare_mrc_cache(void)
+{
+	struct mrc_data_container *cache;
+	struct mrc_region entry;
+	int ret;
+
+	ret = mrccache_get_region(MRC_TYPE_NORMAL, NULL, &entry);
+	if (ret)
+		return NULL;
+
+	cache = mrccache_find_current(&entry);
+	if (!cache)
+		return NULL;
+
+	debug("%s: mrc cache at %p, size %x checksum %04x\n", __func__,
+	      cache->data, cache->data_size, cache->checksum);
+
+	return cache->data;
+}
+
 int arch_fsp_init(void)
 {
 	void *nvs;
diff --git a/arch/x86/lib/fsp1/fsp_dram.c b/arch/x86/lib/fsp1/fsp_dram.c
index 6a3349b..5ef8974 100644
--- a/arch/x86/lib/fsp1/fsp_dram.c
+++ b/arch/x86/lib/fsp1/fsp_dram.c
@@ -15,9 +15,11 @@ int dram_init(void)
 	if (ret)
 		return ret;
 
-	if (IS_ENABLED(CONFIG_ENABLE_MRC_CACHE))
-		gd->arch.mrc_output = fsp_get_nvs_data(gd->arch.hob_list,
-					       &gd->arch.mrc_output_len);
+	if (IS_ENABLED(CONFIG_ENABLE_MRC_CACHE)) {
+		struct mrc_output *mrc = &gd->arch.mrc[MRC_TYPE_NORMAL];
+
+		mrc->buf = fsp_get_nvs_data(gd->arch.hob_list, &mrc->len);
+	}
 
 	return 0;
 }
diff --git a/arch/x86/lib/fsp2/Makefile b/arch/x86/lib/fsp2/Makefile
new file mode 100644
index 0000000..ddbe2d0
--- /dev/null
+++ b/arch/x86/lib/fsp2/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2019 Google LLC
+
+obj-y += fsp_common.o
+obj-y += fsp_dram.o
+obj-y += fsp_init.o
+obj-y += fsp_meminit.o
+obj-y += fsp_silicon_init.o
+obj-y += fsp_support.o
diff --git a/arch/x86/lib/fsp2/fsp_common.c b/arch/x86/lib/fsp2/fsp_common.c
new file mode 100644
index 0000000..f69456e
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_common.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <init.h>
+
+int arch_fsp_init(void)
+{
+	return 0;
+}
diff --git a/arch/x86/lib/fsp2/fsp_dram.c b/arch/x86/lib/fsp2/fsp_dram.c
new file mode 100644
index 0000000..90a238a
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_dram.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <acpi_s3.h>
+#include <handoff.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/fsp/fsp_support.h>
+#include <asm/fsp2/fsp_api.h>
+#include <asm/fsp2/fsp_internal.h>
+
+int dram_init(void)
+{
+	int ret;
+
+	if (spl_phase() == PHASE_SPL) {
+#ifdef CONFIG_HAVE_ACPI_RESUME
+		bool s3wake = gd->arch.prev_sleep_state == ACPI_S3;
+#else
+		bool s3wake = false;
+#endif
+
+		ret = fsp_memory_init(s3wake,
+			      IS_ENABLED(CONFIG_APL_BOOT_FROM_FAST_SPI_FLASH));
+		if (ret) {
+			debug("Memory init failed (err=%x)\n", ret);
+			return ret;
+		}
+
+		/* The FSP has already set up DRAM, so grab the info we need */
+		ret = fsp_scan_for_ram_size();
+		if (ret)
+			return ret;
+
+#ifdef CONFIG_ENABLE_MRC_CACHE
+		gd->arch.mrc[MRC_TYPE_NORMAL].buf =
+			fsp_get_nvs_data(gd->arch.hob_list,
+					 &gd->arch.mrc[MRC_TYPE_NORMAL].len);
+		gd->arch.mrc[MRC_TYPE_VAR].buf =
+			fsp_get_var_nvs_data(gd->arch.hob_list,
+					     &gd->arch.mrc[MRC_TYPE_VAR].len);
+		log_debug("normal %x, var %x\n",
+			  gd->arch.mrc[MRC_TYPE_NORMAL].len,
+			  gd->arch.mrc[MRC_TYPE_VAR].len);
+#endif
+	} else {
+#if CONFIG_IS_ENABLED(HANDOFF)
+		struct spl_handoff *ho = gd->spl_handoff;
+
+		if (!ho) {
+			debug("No SPL handoff found\n");
+			return -ESTRPIPE;
+		}
+		gd->ram_size = ho->ram_size;
+		handoff_load_dram_banks(ho);
+#endif
+		ret = arch_fsps_preinit();
+		if (ret)
+			return log_msg_ret("fsp_s_preinit", ret);
+	}
+
+	return 0;
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+#if CONFIG_IS_ENABLED(HANDOFF)
+	struct spl_handoff *ho = gd->spl_handoff;
+
+	return ho->arch.usable_ram_top;
+#endif
+
+	return gd->ram_top;
+}
diff --git a/arch/x86/lib/fsp2/fsp_init.c b/arch/x86/lib/fsp2/fsp_init.c
new file mode 100644
index 0000000..da9bd6b
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_init.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <binman.h>
+#include <binman_sym.h>
+#include <cbfs.h>
+#include <dm.h>
+#include <init.h>
+#include <spi.h>
+#include <spl.h>
+#include <spi_flash.h>
+#include <asm/intel_pinctrl.h>
+#include <dm/uclass-internal.h>
+#include <asm/fsp2/fsp_internal.h>
+
+int arch_cpu_init_dm(void)
+{
+	struct udevice *dev;
+	ofnode node;
+	int ret;
+
+	/* Make sure pads are set up early in U-Boot */
+	if (spl_phase() != PHASE_BOARD_F)
+		return 0;
+
+	/* Probe all pinctrl devices to set up the pads */
+	ret = uclass_first_device_err(UCLASS_PINCTRL, &dev);
+	if (ret)
+		return log_msg_ret("no fsp pinctrl", ret);
+	node = ofnode_path("fsp");
+	if (!ofnode_valid(node))
+		return log_msg_ret("no fsp params", -EINVAL);
+	ret = pinctrl_config_pads_for_node(dev, node);
+	if (ret)
+		return log_msg_ret("pad config", ret);
+
+	return ret;
+}
+
+#if !defined(CONFIG_TPL_BUILD)
+binman_sym_declare(ulong, intel_fsp_m, image_pos);
+binman_sym_declare(ulong, intel_fsp_m, size);
+
+/**
+ * get_cbfs_fsp() - Obtain the FSP by looking up in CBFS
+ *
+ * This looks up an FSP in a CBFS. It is used mostly for testing, when booting
+ * U-Boot from a hybrid image containing coreboot as the first-stage bootloader.
+ *
+ * The typical use for this feature is when building a Chrome OS image which
+ * includes coreboot in it. By adding U-Boot into the 'COREBOOT' CBFS as well,
+ * it is possible to make coreboot chain-load U-Boot. Thus the initial stages of
+ * the SoC init can be done by coreboot and the later stages by U-Boot. This is
+ * a convenient way to start the porting work. The jump to U-Boot can then be
+ * moved progressively earlier and earlier, until U-Boot takes over all the init
+ * and you have a native port.
+ *
+ * This function looks up a CBFS at a known location and reads the FSP-M from it
+ * so that U-Boot can init the memory.
+ *
+ * This function is not used in the normal boot but is kept here for future
+ * development.
+ *
+ * @type; Type to look up (only FSP_M supported at present)
+ * @map_base: Base memory address for mapped SPI
+ * @entry: Returns an entry containing the position of the FSP image
+ */
+static int get_cbfs_fsp(enum fsp_type_t type, ulong map_base,
+			struct binman_entry *entry)
+{
+	/*
+	 * Use a hard-coded position of CBFS in the ROM for now. It would be
+	 * possible to read the position using the FMAP in the ROM, but since
+	 * this code is only used for development, it doesn't seem worth it.
+	 * Use the 'cbfstool <image> layout' command to get these values, e.g.:
+	 * 'COREBOOT' (CBFS, size 1814528, offset 2117632).
+	 */
+	ulong cbfs_base = 0x205000;
+	ulong cbfs_size = 0x1bb000;
+	struct cbfs_priv *cbfs;
+	int ret;
+
+	ret = cbfs_init_mem(map_base + cbfs_base, cbfs_size, &cbfs);
+	if (ret)
+		return ret;
+	if (!ret) {
+		const struct cbfs_cachenode *node;
+
+		node = cbfs_find_file(cbfs, "fspm.bin");
+		if (!node)
+			return log_msg_ret("fspm node", -ENOENT);
+
+		entry->image_pos = (ulong)node->data;
+		entry->size = node->data_length;
+	}
+
+	return 0;
+}
+
+int fsp_locate_fsp(enum fsp_type_t type, struct binman_entry *entry,
+		   bool use_spi_flash, struct udevice **devp,
+		   struct fsp_header **hdrp, ulong *rom_offsetp)
+{
+	ulong mask = CONFIG_ROM_SIZE - 1;
+	struct udevice *dev;
+	ulong rom_offset = 0;
+	uint map_size;
+	ulong map_base;
+	uint offset;
+	int ret;
+
+	/*
+	 * Find the devices but don't probe them, since we don't want to
+	 * auto-config PCI before silicon init runs
+	 */
+	ret = uclass_find_first_device(UCLASS_NORTHBRIDGE, &dev);
+	if (ret)
+		return log_msg_ret("Cannot get northbridge", ret);
+	if (!use_spi_flash) {
+		struct udevice *sf;
+
+		/* Just use the SPI driver to get the memory map */
+		ret = uclass_find_first_device(UCLASS_SPI_FLASH, &sf);
+		if (ret)
+			return log_msg_ret("Cannot get SPI flash", ret);
+		ret = dm_spi_get_mmap(sf, &map_base, &map_size, &offset);
+		if (ret)
+			return log_msg_ret("Could not get flash mmap", ret);
+	}
+
+	if (spl_phase() >= PHASE_BOARD_F) {
+		if (type != FSP_S)
+			return -EPROTONOSUPPORT;
+		ret = binman_entry_find("intel-fsp-s", entry);
+		if (ret)
+			return log_msg_ret("binman entry", ret);
+		if (!use_spi_flash)
+			rom_offset = (map_base & mask) - CONFIG_ROM_SIZE;
+	} else {
+		ret = -ENOENT;
+		if (false)
+			/*
+			 * Support using a hybrid image build by coreboot. See
+			 * the function comments for details
+			 */
+			ret = get_cbfs_fsp(type, map_base, entry);
+		if (ret) {
+			ulong mask = CONFIG_ROM_SIZE - 1;
+
+			if (type != FSP_M)
+				return -EPROTONOSUPPORT;
+			entry->image_pos = binman_sym(ulong, intel_fsp_m,
+						      image_pos);
+			entry->size = binman_sym(ulong, intel_fsp_m, size);
+			if (entry->image_pos != BINMAN_SYM_MISSING) {
+				ret = 0;
+				if (use_spi_flash)
+					entry->image_pos &= mask;
+				else
+					entry->image_pos += (map_base & mask);
+			} else {
+				ret = -ENOENT;
+			}
+		}
+	}
+	if (ret)
+		return log_msg_ret("Cannot find FSP", ret);
+	entry->image_pos += rom_offset;
+
+	/*
+	 * Account for the time taken to read memory-mapped SPI flash since in
+	 * this case we don't use the SPI driver and BOOTSTAGE_ID_ACCUM_SPI.
+	 */
+	if (!use_spi_flash)
+		bootstage_start(BOOTSTAGE_ID_ACCUM_MMAP_SPI, "mmap_spi");
+	ret = fsp_get_header(entry->image_pos, entry->size, use_spi_flash,
+			     hdrp);
+	if (!use_spi_flash)
+		bootstage_accum(BOOTSTAGE_ID_ACCUM_MMAP_SPI);
+	if (ret)
+		return log_msg_ret("fsp_get_header", ret);
+	*devp = dev;
+	if (rom_offsetp)
+		*rom_offsetp = rom_offset;
+
+	return 0;
+}
+#endif
diff --git a/arch/x86/lib/fsp2/fsp_meminit.c b/arch/x86/lib/fsp2/fsp_meminit.c
new file mode 100644
index 0000000..bf30c47
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_meminit.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: Intel
+/*
+ * Copyright (C) 2015-2016 Intel Corp.
+ * (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.)
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ * Mostly taken from coreboot fsp2_0/memory_init.c
+ */
+
+#include <common.h>
+#include <binman.h>
+#include <asm/mrccache.h>
+#include <asm/fsp/fsp_infoheader.h>
+#include <asm/fsp2/fsp_api.h>
+#include <asm/fsp2/fsp_internal.h>
+#include <asm/arch/fsp/fsp_configs.h>
+#include <asm/arch/fsp/fsp_m_upd.h>
+
+static int prepare_mrc_cache_type(enum mrc_type_t type,
+				  struct mrc_data_container **cachep)
+{
+	struct mrc_data_container *cache;
+	struct mrc_region entry;
+	int ret;
+
+	ret = mrccache_get_region(type, NULL, &entry);
+	if (ret)
+		return ret;
+	cache = mrccache_find_current(&entry);
+	if (!cache)
+		return -ENOENT;
+
+	log_debug("MRC at %x, size %x\n", (uint)cache->data, cache->data_size);
+	*cachep = cache;
+
+	return 0;
+}
+
+int prepare_mrc_cache(struct fspm_upd *upd)
+{
+	struct mrc_data_container *cache;
+	int ret;
+
+	ret = prepare_mrc_cache_type(MRC_TYPE_NORMAL, &cache);
+	if (ret)
+		return log_msg_ret("Cannot get normal cache", ret);
+	upd->arch.nvs_buffer_ptr = cache->data;
+
+	ret = prepare_mrc_cache_type(MRC_TYPE_VAR, &cache);
+	if (ret)
+		return log_msg_ret("Cannot get var cache", ret);
+	upd->config.variable_nvs_buffer_ptr = cache->data;
+
+	return 0;
+}
+
+int fsp_memory_init(bool s3wake, bool use_spi_flash)
+{
+	struct fspm_upd upd, *fsp_upd;
+	fsp_memory_init_func func;
+	struct binman_entry entry;
+	struct fsp_header *hdr;
+	struct hob_header *hob;
+	struct udevice *dev;
+	int ret;
+
+	ret = fsp_locate_fsp(FSP_M, &entry, use_spi_flash, &dev, &hdr, NULL);
+	if (ret)
+		return log_msg_ret("locate FSP", ret);
+	debug("Found FSP_M at %x, size %x\n", hdr->img_base, hdr->img_size);
+
+	/* Copy over the default config */
+	fsp_upd = (struct fspm_upd *)(hdr->img_base + hdr->cfg_region_off);
+	if (fsp_upd->header.signature != FSPM_UPD_SIGNATURE)
+		return log_msg_ret("Bad UPD signature", -EPERM);
+	memcpy(&upd, fsp_upd, sizeof(upd));
+
+	ret = fspm_update_config(dev, &upd);
+	if (ret)
+		return log_msg_ret("Could not setup config", ret);
+
+	debug("SDRAM init...");
+	bootstage_start(BOOTSTATE_ID_ACCUM_FSP_M, "fsp-m");
+	func = (fsp_memory_init_func)(hdr->img_base + hdr->fsp_mem_init);
+	ret = func(&upd, &hob);
+	bootstage_accum(BOOTSTATE_ID_ACCUM_FSP_M);
+	if (ret)
+		return log_msg_ret("SDRAM init fail\n", ret);
+
+	gd->arch.hob_list = hob;
+	debug("done\n");
+
+	ret = fspm_done(dev);
+	if (ret)
+		return log_msg_ret("fsm_done\n", ret);
+
+	return 0;
+}
diff --git a/arch/x86/lib/fsp2/fsp_silicon_init.c b/arch/x86/lib/fsp2/fsp_silicon_init.c
new file mode 100644
index 0000000..d7ce43e
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_silicon_init.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: Intel
+/*
+ * Copyright (C) 2015-2016 Intel Corp.
+ * (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.)
+ *
+ * Mostly taken from coreboot fsp2_0/silicon_init.c
+ */
+
+#define LOG_CATEGORY UCLASS_NORTHBRIDGE
+
+#include <common.h>
+#include <binman.h>
+#include <dm.h>
+#include <asm/arch/fsp/fsp_configs.h>
+#include <asm/arch/fsp/fsp_s_upd.h>
+#include <asm/fsp/fsp_infoheader.h>
+#include <asm/fsp2/fsp_internal.h>
+
+int fsp_silicon_init(bool s3wake, bool use_spi_flash)
+{
+	struct fsps_upd upd, *fsp_upd;
+	fsp_silicon_init_func func;
+	struct fsp_header *hdr;
+	struct binman_entry entry;
+	struct udevice *dev;
+	ulong rom_offset = 0;
+	int ret;
+
+	ret = fsp_locate_fsp(FSP_S, &entry, use_spi_flash, &dev, &hdr,
+			     &rom_offset);
+	if (ret)
+		return log_msg_ret("locate FSP", ret);
+	gd->arch.fsp_s_hdr = hdr;
+
+	/* Copy over the default config */
+	fsp_upd = (struct fsps_upd *)(hdr->img_base + hdr->cfg_region_off);
+	if (fsp_upd->header.signature != FSPS_UPD_SIGNATURE)
+		return log_msg_ret("Bad UPD signature", -EPERM);
+	memcpy(&upd, fsp_upd, sizeof(upd));
+
+	ret = fsps_update_config(dev, rom_offset, &upd);
+	if (ret)
+		return log_msg_ret("Could not setup config", ret);
+	log_debug("Silicon init...");
+	bootstage_start(BOOTSTATE_ID_ACCUM_FSP_S, "fsp-s");
+	func = (fsp_silicon_init_func)(hdr->img_base + hdr->fsp_silicon_init);
+	ret = func(&upd);
+	bootstage_accum(BOOTSTATE_ID_ACCUM_FSP_S);
+	if (ret)
+		return log_msg_ret("Silicon init fail\n", ret);
+	log_debug("done\n");
+
+	return 0;
+}
diff --git a/arch/x86/lib/fsp2/fsp_support.c b/arch/x86/lib/fsp2/fsp_support.c
new file mode 100644
index 0000000..0a04b44
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_support.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: Intel
+/*
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <spi_flash.h>
+#include <asm/fsp/fsp_support.h>
+#include <asm/fsp2/fsp_internal.h>
+
+/* The amount of the FSP header to probe to obtain what we need */
+#define PROBE_BUF_SIZE 0x180
+
+int fsp_get_header(ulong offset, ulong size, bool use_spi_flash,
+		   struct fsp_header **fspp)
+{
+	static efi_guid_t guid = FSP_HEADER_GUID;
+	struct fv_ext_header *exhdr;
+	struct fsp_header *fsp;
+	struct ffs_file_header *file_hdr;
+	struct fv_header *fv;
+	struct raw_section *raw;
+	void *ptr, *base;
+	u8 buf[PROBE_BUF_SIZE];
+	struct udevice *dev;
+	int ret;
+
+	/*
+	 * There are quite a very steps to work through all the headers in this
+	 * file and the structs have similar names. Turn on debugging if needed
+	 * to understand what is going wrong.
+	 *
+	 * You are in a maze of twisty little headers all alike.
+	 */
+	debug("offset=%x buf=%x\n", (uint)offset, (uint)buf);
+	if (use_spi_flash) {
+		ret = uclass_first_device_err(UCLASS_SPI_FLASH, &dev);
+		if (ret)
+			return log_msg_ret("Cannot find flash device", ret);
+		ret = spi_flash_read_dm(dev, offset, PROBE_BUF_SIZE, buf);
+		if (ret)
+			return log_msg_ret("Cannot read flash", ret);
+	} else {
+		memcpy(buf, (void *)offset, PROBE_BUF_SIZE);
+	}
+
+	/* Initalise the FSP base */
+	ptr = buf;
+	fv = ptr;
+
+	/* Check the FV signature, _FVH */
+	debug("offset=%x sign=%x\n", (uint)offset, (uint)fv->sign);
+	if (fv->sign != EFI_FVH_SIGNATURE)
+		return log_msg_ret("Base FV signature", -EINVAL);
+
+	/* Go to the end of the FV header and align the address */
+	debug("fv->ext_hdr_off = %x\n", fv->ext_hdr_off);
+	ptr += fv->ext_hdr_off;
+	exhdr = ptr;
+	ptr += ALIGN(exhdr->ext_hdr_size, 8);
+	debug("ptr=%x\n", ptr - (void *)buf);
+
+	/* Check the FFS GUID */
+	file_hdr = ptr;
+	if (memcmp(&file_hdr->name, &guid, sizeof(guid)))
+		return log_msg_ret("Base FFS GUID", -ENXIO);
+	/* Add the FFS header size to find the raw section header */
+	ptr = file_hdr + 1;
+
+	raw = ptr;
+	debug("raw->type = %x\n", raw->type);
+	if (raw->type != EFI_SECTION_RAW)
+		return log_msg_ret("Section type not RAW", -ENOEXEC);
+
+	/* Add the raw section header size to find the FSP header */
+	ptr = raw + 1;
+	fsp = ptr;
+
+	/* Check the FSPH header */
+	debug("fsp %x\n", (uint)fsp);
+	if (fsp->sign != EFI_FSPH_SIGNATURE)
+		return log_msg_ret("Base FSPH signature", -EACCES);
+
+	base = (void *)fsp->img_base;
+	debug("Image base %x\n", (uint)base);
+	debug("Image addr %x\n", (uint)fsp->fsp_mem_init);
+	if (use_spi_flash) {
+		ret = spi_flash_read_dm(dev, offset, size, base);
+		if (ret)
+			return log_msg_ret("Could not read FPS-M", ret);
+	} else {
+		memcpy(base, (void *)offset, size);
+	}
+	ptr = base + (ptr - (void *)buf);
+	*fspp = ptr;
+
+	return 0;
+}
+
+u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase)
+{
+	fsp_notify_f notify;
+	struct fsp_notify_params params;
+	struct fsp_notify_params *params_ptr;
+	u32 status;
+
+	if (!fsp_hdr)
+		fsp_hdr = gd->arch.fsp_s_hdr;
+
+	if (!fsp_hdr)
+		return log_msg_ret("no FSP", -ENOENT);
+
+	notify = (fsp_notify_f)(fsp_hdr->img_base + fsp_hdr->fsp_notify);
+	params.phase = phase;
+	params_ptr = &params;
+
+	/*
+	 * Use ASM code to ensure correct parameter is on the stack for
+	 * FspNotify as U-Boot is using different ABI from FSP
+	 */
+	asm volatile (
+		"pushl	%1;"		/* push notify phase */
+		"call	*%%eax;"	/* call FspNotify */
+		"addl	$4, %%esp;"	/* clean up the stack */
+		: "=a"(status) : "m"(params_ptr), "a"(notify), "m"(*params_ptr)
+	);
+
+	return status;
+}
diff --git a/arch/x86/lib/mrccache.c b/arch/x86/lib/mrccache.c
index 33bb520..b9420a4 100644
--- a/arch/x86/lib/mrccache.c
+++ b/arch/x86/lib/mrccache.c
@@ -14,6 +14,8 @@
 #include <spi.h>
 #include <spi_flash.h>
 #include <asm/mrccache.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -80,21 +82,31 @@ struct mrc_data_container *mrccache_find_current(struct mrc_region *entry)
 /**
  * find_next_mrc_cache() - get next cache entry
  *
+ * This moves to the next cache entry in the region, making sure it has enough
+ * space to hold data of size @data_size.
+ *
  * @entry:	MRC cache flash area
  * @cache:	Entry to start from
+ * @data_size:	Required data size of the new entry. Note that we assume that
+ *	all cache entries are the same size
  *
  * @return next cache entry if found, NULL if we got to the end
  */
 static struct mrc_data_container *find_next_mrc_cache(struct mrc_region *entry,
-		struct mrc_data_container *cache)
+		struct mrc_data_container *prev, int data_size)
 {
+	struct mrc_data_container *cache;
 	ulong base_addr, end_addr;
 
 	base_addr = entry->base + entry->offset;
 	end_addr = base_addr + entry->length;
 
-	cache = next_mrc_block(cache);
-	if ((ulong)cache >= end_addr) {
+	/*
+	 * We assume that all cache entries are the same size, but let's use
+	 * data_size here for clarity.
+	 */
+	cache = next_mrc_block(prev);
+	if ((ulong)cache + mrc_block_size(data_size) > end_addr) {
 		/* Crossed the boundary */
 		cache = NULL;
 		debug("%s: no available entries found\n", __func__);
@@ -106,8 +118,20 @@ static struct mrc_data_container *find_next_mrc_cache(struct mrc_region *entry,
 	return cache;
 }
 
-int mrccache_update(struct udevice *sf, struct mrc_region *entry,
-		    struct mrc_data_container *cur)
+/**
+ * mrccache_update() - update the MRC cache with a new record
+ *
+ * This writes a new record to the end of the MRC cache region. If the new
+ * record is the same as the latest record then the write is skipped
+ *
+ * @sf:		SPI flash to write to
+ * @entry:	Position and size of MRC cache in SPI flash
+ * @cur:	Record to write
+ * @return 0 if updated, -EEXIST if the record is the same as the latest
+ * record, -EINVAL if the record is not valid, other error if SPI write failed
+ */
+static int mrccache_update(struct udevice *sf, struct mrc_region *entry,
+			   struct mrc_data_container *cur)
 {
 	struct mrc_data_container *cache;
 	ulong offset;
@@ -131,7 +155,7 @@ int mrccache_update(struct udevice *sf, struct mrc_region *entry,
 
 	/* Move to the next block, which will be the first unused block */
 	if (cache)
-		cache = find_next_mrc_cache(entry, cache);
+		cache = find_next_mrc_cache(entry, cache, cur->data_size);
 
 	/*
 	 * If we have got to the end, erase the entire mrc-cache area and start
@@ -156,130 +180,158 @@ int mrccache_update(struct udevice *sf, struct mrc_region *entry,
 				 cur);
 	if (ret) {
 		debug("Failed to write to SPI flash\n");
-		return ret;
+		return log_msg_ret("Cannot update mrccache", ret);
 	}
 
 	return 0;
 }
 
-static void mrccache_setup(void *data)
+static void mrccache_setup(struct mrc_output *mrc, void *data)
 {
 	struct mrc_data_container *cache = data;
 	u16 checksum;
 
 	cache->signature = MRC_DATA_SIGNATURE;
-	cache->data_size = gd->arch.mrc_output_len;
-	checksum = compute_ip_checksum(gd->arch.mrc_output, cache->data_size);
+	cache->data_size = mrc->len;
+	checksum = compute_ip_checksum(mrc->buf, cache->data_size);
 	debug("Saving %d bytes for MRC output data, checksum %04x\n",
 	      cache->data_size, checksum);
 	cache->checksum = checksum;
 	cache->reserved = 0;
-	memcpy(cache->data, gd->arch.mrc_output, cache->data_size);
+	memcpy(cache->data, mrc->buf, cache->data_size);
 
-	/* gd->arch.mrc_output now points to the container */
-	gd->arch.mrc_output = (char *)cache;
+	mrc->cache = cache;
 }
 
 int mrccache_reserve(void)
 {
-	if (!gd->arch.mrc_output_len)
-		return 0;
+	int i;
 
-	/* adjust stack pointer to store pure cache data plus the header */
-	gd->start_addr_sp -= (gd->arch.mrc_output_len + MRC_DATA_HEADER_SIZE);
-	mrccache_setup((void *)gd->start_addr_sp);
+	for (i = 0; i < MRC_TYPE_COUNT; i++) {
+		struct mrc_output *mrc = &gd->arch.mrc[i];
 
-	gd->start_addr_sp &= ~0xf;
+		if (!mrc->len)
+			continue;
+
+		/* adjust stack pointer to store pure cache data plus header */
+		gd->start_addr_sp -= (mrc->len + MRC_DATA_HEADER_SIZE);
+		mrccache_setup(mrc, (void *)gd->start_addr_sp);
+
+		gd->start_addr_sp &= ~0xf;
+	}
 
 	return 0;
 }
 
-int mrccache_get_region(struct udevice **devp, struct mrc_region *entry)
+int mrccache_get_region(enum mrc_type_t type, struct udevice **devp,
+			struct mrc_region *entry)
 {
-	const void *blob = gd->fdt_blob;
-	int node, mrc_node;
+	struct udevice *dev;
+	ofnode mrc_node;
+	ulong map_base;
+	uint map_size;
+	uint offset;
 	u32 reg[2];
 	int ret;
 
-	/* Find the flash chip within the SPI controller node */
-	node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
-	if (node < 0) {
-		debug("%s: Cannot find SPI flash\n", __func__);
-		return -ENOENT;
-	}
-
-	if (fdtdec_get_int_array(blob, node, "memory-map", reg, 2)) {
-		debug("%s: Cannot find memory map\n", __func__);
-		return -EINVAL;
+	/*
+	 * Find the flash chip within the SPI controller node. Avoid probing
+	 * the device here since it may put it into a strange state where the
+	 * memory map cannot be read.
+	 */
+	ret = uclass_find_first_device(UCLASS_SPI_FLASH, &dev);
+	if (ret)
+		return log_msg_ret("Cannot find SPI flash\n", ret);
+	ret = dm_spi_get_mmap(dev, &map_base, &map_size, &offset);
+	if (!ret) {
+		entry->base = map_base;
+	} else {
+		ret = dev_read_u32_array(dev, "memory-map", reg, 2);
+		if (ret)
+			return log_msg_ret("Cannot find memory map\n", ret);
+		entry->base = reg[0];
 	}
-	entry->base = reg[0];
 
 	/* Find the place where we put the MRC cache */
-	mrc_node = fdt_subnode_offset(blob, node, "rw-mrc-cache");
-	if (mrc_node < 0) {
-		debug("%s: Cannot find node\n", __func__);
-		return -EPERM;
-	}
+	mrc_node = dev_read_subnode(dev, type == MRC_TYPE_NORMAL ?
+				    "rw-mrc-cache" : "rw-var-mrc-cache");
+	if (!ofnode_valid(mrc_node))
+		return log_msg_ret("Cannot find node", -EPERM);
 
-	if (fdtdec_get_int_array(blob, mrc_node, "reg", reg, 2)) {
-		debug("%s: Cannot find address\n", __func__);
-		return -EINVAL;
-	}
+	ret = ofnode_read_u32_array(mrc_node, "reg", reg, 2);
+	if (ret)
+		return log_msg_ret("Cannot find address", ret);
 	entry->offset = reg[0];
 	entry->length = reg[1];
 
-	if (devp) {
-		ret = uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node,
-						     devp);
-		debug("ret = %d\n", ret);
-		if (ret)
-			return ret;
-	}
+	if (devp)
+		*devp = dev;
+	debug("MRC cache type %d in '%s', offset %x, len %x, base %x\n",
+	      type, dev->name, entry->offset, entry->length, entry->base);
 
 	return 0;
 }
 
-int mrccache_save(void)
+static int mrccache_save_type(enum mrc_type_t type)
 {
-	struct mrc_data_container *data;
+	struct mrc_data_container *cache;
+	struct mrc_output *mrc;
 	struct mrc_region entry;
 	struct udevice *sf;
 	int ret;
 
-	if (!gd->arch.mrc_output_len)
+	mrc = &gd->arch.mrc[type];
+	if (!mrc->len)
 		return 0;
-	debug("Saving %d bytes of MRC output data to SPI flash\n",
-	      gd->arch.mrc_output_len);
-
-	ret = mrccache_get_region(&sf, &entry);
+	log_debug("Saving %#x bytes of MRC output data type %d to SPI flash\n",
+		  mrc->len, type);
+	ret = mrccache_get_region(type, &sf, &entry);
 	if (ret)
-		goto err_entry;
-	data  = (struct mrc_data_container *)gd->arch.mrc_output;
-	ret = mrccache_update(sf, &entry, data);
-	if (!ret) {
-		debug("Saved MRC data with checksum %04x\n", data->checksum);
-	} else if (ret == -EEXIST) {
+		return log_msg_ret("Cannot get region", ret);
+	ret = device_probe(sf);
+	if (ret)
+		return log_msg_ret("Cannot probe device", ret);
+	cache = mrc->cache;
+
+	ret = mrccache_update(sf, &entry, cache);
+	if (!ret)
+		debug("Saved MRC data with checksum %04x\n", cache->checksum);
+	else if (ret == -EEXIST)
 		debug("MRC data is the same as last time, skipping save\n");
-		ret = 0;
+
+	return 0;
+}
+
+int mrccache_save(void)
+{
+	int i;
+
+	for (i = 0; i < MRC_TYPE_COUNT; i++) {
+		int ret;
+
+		ret = mrccache_save_type(i);
+		if (ret)
+			return ret;
 	}
 
-err_entry:
-	if (ret)
-		debug("%s: Failed: %d\n", __func__, ret);
-	return ret;
+	return 0;
 }
 
 int mrccache_spl_save(void)
 {
-	void *data;
-	int size;
-
-	size = gd->arch.mrc_output_len + MRC_DATA_HEADER_SIZE;
-	data = malloc(size);
-	if (!data)
-		return log_msg_ret("Allocate MRC cache block", -ENOMEM);
-	mrccache_setup(data);
-	gd->arch.mrc_output = data;
+	int i;
+
+	for (i = 0; i < MRC_TYPE_COUNT; i++) {
+		struct mrc_output *mrc = &gd->arch.mrc[i];
+		void *data;
+		int size;
+
+		size = mrc->len + MRC_DATA_HEADER_SIZE;
+		data = malloc(size);
+		if (!data)
+			return log_msg_ret("Allocate MRC cache block", -ENOMEM);
+		mrccache_setup(mrc, data);
+	}
 
 	return mrccache_save();
 }
diff --git a/arch/x86/lib/pirq_routing.c b/arch/x86/lib/pirq_routing.c
index e5f0e61..17bd2fc 100644
--- a/arch/x86/lib/pirq_routing.c
+++ b/arch/x86/lib/pirq_routing.c
@@ -10,6 +10,8 @@
 #include <asm/pci.h>
 #include <asm/pirq_routing.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static u8 pirq_get_next_free_irq(struct udevice *dev, u8 *pirq, u16 bitmap,
 				 bool irq_already_routed[])
 {
@@ -131,3 +133,11 @@ u32 copy_pirq_routing_table(u32 addr, struct irq_routing_table *rt)
 
 	return addr + rt->size;
 }
+
+ulong write_pirq_routing_table(ulong addr)
+{
+	if (!gd->arch.pirq_routing_table)
+		return addr;
+
+	return copy_pirq_routing_table(addr, gd->arch.pirq_routing_table);
+}