diff options
author | Tom Rini <trini@konsulko.com> | 2022-03-31 13:46:53 -0400 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2022-04-08 10:46:22 -0400 |
commit | 2fc0995cc05cc55bee79f387d1e83571539b0b3e (patch) | |
tree | 0e64d4838989cff35a0cc14dbfbcb6a5a37667c3 /arch | |
parent | 9035caf080cc595f2fef3a9ea9c659487122210e (diff) | |
download | u-boot-2fc0995cc05cc55bee79f387d1e83571539b0b3e.zip u-boot-2fc0995cc05cc55bee79f387d1e83571539b0b3e.tar.gz u-boot-2fc0995cc05cc55bee79f387d1e83571539b0b3e.tar.bz2 |
arm: Remove unused ep93xx code
There are no platforms for this architecture anymore, remove unused
code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/cpu/arm920t/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/cpu/arm920t/ep93xx/Makefile | 19 | ||||
-rw-r--r-- | arch/arm/cpu/arm920t/ep93xx/cpu.c | 37 | ||||
-rw-r--r-- | arch/arm/cpu/arm920t/ep93xx/led.c | 85 | ||||
-rw-r--r-- | arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S | 457 | ||||
-rw-r--r-- | arch/arm/cpu/arm920t/ep93xx/speed.c | 96 | ||||
-rw-r--r-- | arch/arm/cpu/arm920t/ep93xx/timer.c | 117 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-ep93xx/ep93xx.h | 666 |
8 files changed, 0 insertions, 1478 deletions
diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile index c63f578..b70822c 100644 --- a/arch/arm/cpu/arm920t/Makefile +++ b/arch/arm/cpu/arm920t/Makefile @@ -7,7 +7,6 @@ extra-y = start.o obj-y += cpu.o -obj-$(CONFIG_EP93XX) += ep93xx/ obj-$(CONFIG_IMX) += imx/ # some files can only build in ARM mode diff --git a/arch/arm/cpu/arm920t/ep93xx/Makefile b/arch/arm/cpu/arm920t/ep93xx/Makefile deleted file mode 100644 index 152b5e7..0000000 --- a/arch/arm/cpu/arm920t/ep93xx/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Cirrus Logic EP93xx CPU-specific Makefile -# -# Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net> -# -# Copyright (C) 2004, 2005 -# Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com> -# -# Copyright (C) 2006 -# Dominic Rath <Dominic.Rath@gmx.de> -# -# Based on an original Makefile, which is -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y = cpu.o led.o speed.o timer.o -obj-y += lowlevel_init.o diff --git a/arch/arm/cpu/arm920t/ep93xx/cpu.c b/arch/arm/cpu/arm920t/ep93xx/cpu.c deleted file mode 100644 index 3435bdc..0000000 --- a/arch/arm/cpu/arm920t/ep93xx/cpu.c +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Cirrus Logic EP93xx CPU-specific support. - * - * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net> - * - * Copyright (C) 2004, 2005 - * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com> - */ - -#include <common.h> -#include <cpu_func.h> -#include <asm/arch/ep93xx.h> -#include <asm/io.h> - -/* We reset the CPU by generating a 1-->0 transition on DeviceCfg bit 31. */ -extern void reset_cpu(void) -{ - struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; - uint32_t value; - - /* Unlock DeviceCfg and set SWRST */ - writel(0xAA, &syscon->sysswlock); - value = readl(&syscon->devicecfg); - value |= SYSCON_DEVICECFG_SWRST; - writel(value, &syscon->devicecfg); - - /* Unlock DeviceCfg and clear SWRST */ - writel(0xAA, &syscon->sysswlock); - value = readl(&syscon->devicecfg); - value &= ~SYSCON_DEVICECFG_SWRST; - writel(value, &syscon->devicecfg); - - /* Dying... */ - while (1) - ; /* noop */ -} diff --git a/arch/arm/cpu/arm920t/ep93xx/led.c b/arch/arm/cpu/arm920t/ep93xx/led.c deleted file mode 100644 index 862663a..0000000 --- a/arch/arm/cpu/arm920t/ep93xx/led.c +++ /dev/null @@ -1,85 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2010, 2009 Matthias Kaehlcke <matthias@kaehlcke.net> - */ - -#include <asm/io.h> -#include <asm/arch/ep93xx.h> -#include <config.h> -#include <status_led.h> - -static uint8_t saved_state[2] = {CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_OFF}; -static uint32_t gpio_pin[2] = {1 << CONFIG_LED_STATUS_GREEN, - 1 << CONFIG_LED_STATUS_RED}; - -static inline void switch_LED_on(uint8_t led) -{ - register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE; - - writel(readl(&gpio->pedr) | gpio_pin[led], &gpio->pedr); - saved_state[led] = CONFIG_LED_STATUS_ON; -} - -static inline void switch_LED_off(uint8_t led) -{ - register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE; - - writel(readl(&gpio->pedr) & ~gpio_pin[led], &gpio->pedr); - saved_state[led] = CONFIG_LED_STATUS_OFF; -} - -void red_led_on(void) -{ - switch_LED_on(CONFIG_LED_STATUS_RED); -} - -void red_led_off(void) -{ - switch_LED_off(CONFIG_LED_STATUS_RED); -} - -void green_led_on(void) -{ - switch_LED_on(CONFIG_LED_STATUS_GREEN); -} - -void green_led_off(void) -{ - switch_LED_off(CONFIG_LED_STATUS_GREEN); -} - -void __led_init(led_id_t mask, int state) -{ - __led_set(mask, state); -} - -void __led_toggle(led_id_t mask) -{ - if (CONFIG_LED_STATUS_RED == mask) { - if (CONFIG_LED_STATUS_ON == saved_state[CONFIG_LED_STATUS_RED]) - red_led_off(); - else - red_led_on(); - } else if (CONFIG_LED_STATUS_GREEN == mask) { - if (CONFIG_LED_STATUS_ON == - saved_state[CONFIG_LED_STATUS_GREEN]) - green_led_off(); - else - green_led_on(); - } -} - -void __led_set(led_id_t mask, int state) -{ - if (CONFIG_LED_STATUS_RED == mask) { - if (CONFIG_LED_STATUS_ON == state) - red_led_on(); - else - red_led_off(); - } else if (CONFIG_LED_STATUS_GREEN == mask) { - if (CONFIG_LED_STATUS_ON == state) - green_led_on(); - else - green_led_off(); - } -} diff --git a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S b/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S deleted file mode 100644 index 5239b10..0000000 --- a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S +++ /dev/null @@ -1,457 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Low-level initialization for EP93xx - * - * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net> - * Copyright (C) 2013 - * Sergey Kostanabev <sergey.kostanbaev <at> fairwaves.ru> - * - * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de> - * Copyright (C) 2006 Cirrus Logic Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - */ - -#include <config.h> -#include <asm/arch-ep93xx/ep93xx.h> - -/* -/* Configure the SDRAM based on the supplied settings. - * - * Input: r0 - SDRAM DEVCFG register - * r2 - configuration for SDRAM chips - * Output: none - * Modifies: r3, r4 - */ -ep93xx_sdram_config: - /* Program the SDRAM device configuration register. */ - ldr r3, =SDRAM_BASE -#ifdef CONFIG_EDB93XX_SDCS0 - str r0, [r3, #SDRAM_OFF_DEVCFG0] -#endif -#ifdef CONFIG_EDB93XX_SDCS1 - str r0, [r3, #SDRAM_OFF_DEVCFG1] -#endif -#ifdef CONFIG_EDB93XX_SDCS2 - str r0, [r3, #SDRAM_OFF_DEVCFG2] -#endif -#ifdef CONFIG_EDB93XX_SDCS3 - str r0, [r3, #SDRAM_OFF_DEVCFG3] -#endif - - /* Set the Initialize and MRS bits (issue continuous NOP commands - * (INIT & MRS set)) - */ - ldr r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_INIT | \ - EP93XX_SDRAMCTRL_GLOBALCFG_MRS | \ - EP93XX_SDRAMCTRL_GLOBALCFG_CKE) - str r4, [r3, #SDRAM_OFF_GLCONFIG] - - /* Delay for 200us. */ - mov r4, #0x3000 -delay1: - subs r4, r4, #1 - bne delay1 - - /* Clear the MRS bit to issue a precharge all. */ - ldr r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_INIT | \ - EP93XX_SDRAMCTRL_GLOBALCFG_CKE) - str r4, [r3, #SDRAM_OFF_GLCONFIG] - - /* Temporarily set the refresh timer to 0x10. Make it really low so - * that refresh cycles are generated. - */ - ldr r4, =0x10 - str r4, [r3, #SDRAM_OFF_REFRSHTIMR] - - /* Delay for at least 80 SDRAM clock cycles. */ - mov r4, #80 -delay2: - subs r4, r4, #1 - bne delay2 - - /* Set the refresh timer to the fastest required for any device - * that might be used. Set 9.6 ms refresh time. - */ - ldr r4, =0x01e0 - str r4, [r3, #SDRAM_OFF_REFRSHTIMR] - - /* Select mode register update mode. */ - ldr r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_CKE | \ - EP93XX_SDRAMCTRL_GLOBALCFG_MRS) - str r4, [r3, #SDRAM_OFF_GLCONFIG] - - /* Program the mode register on the SDRAM by performing fake read */ - ldr r4, [r2] - - /* Select normal operating mode. */ - ldr r4, =EP93XX_SDRAMCTRL_GLOBALCFG_CKE - str r4, [r3, #SDRAM_OFF_GLCONFIG] - - /* Return to the caller. */ - mov pc, lr - -/* - * Test to see if the SDRAM has been configured in a usable mode. - * - * Input: r0 - Test address of SDRAM - * Output: r0 - 0 -- Test OK, -1 -- Failed - * Modifies: r0-r5 - */ -ep93xx_sdram_test: - /* Load the test patterns to be written to SDRAM. */ - ldr r1, =0xf00dface - ldr r2, =0xdeadbeef - ldr r3, =0x08675309 - ldr r4, =0xdeafc0ed - - /* Store the test patterns to SDRAM. */ - stmia r0, {r1-r4} - - /* Load the test patterns from SDRAM one at a time and compare them - * to the actual pattern. - */ - ldr r5, [r0] - cmp r5, r1 - ldreq r5, [r0, #0x0004] - cmpeq r5, r2 - ldreq r5, [r0, #0x0008] - cmpeq r5, r3 - ldreq r5, [r0, #0x000c] - cmpeq r5, r4 - - /* Return -1 if a mismatch was encountered, 0 otherwise. */ - mvnne r0, #0xffffffff - moveq r0, #0x00000000 - - /* Return to the caller. */ - mov pc, lr - -/* - * Determine the size of the SDRAM. Use data=address for the scan. - * - * Input: r0 - Start SDRAM address - * Return: r0 - Single block size - * r1 - Valid block mask - * r2 - Total block count - * Modifies: r0-r5 - */ -ep93xx_sdram_size: - /* Store zero at offset zero. */ - str r0, [r0] - - /* Start checking for an alias at 1MB into SDRAM. */ - ldr r1, =0x00100000 - - /* Store the offset at the current offset. */ -check_block_size: - str r1, [r0, r1] - - /* Read back from zero. */ - ldr r2, [r0] - - /* Stop searching of an alias was found. */ - cmp r1, r2 - beq found_block_size - - /* Advance to the next power of two boundary. */ - mov r1, r1, lsl #1 - - /* Loop back if the size has not reached 256MB. */ - cmp r1, #0x10000000 - bne check_block_size - - /* A full 256MB of memory was found, so return it now. */ - ldr r0, =0x10000000 - ldr r1, =0x00000000 - ldr r2, =0x00000001 - mov pc, lr - - /* An alias was found. See if the first block is 128MB in size. */ -found_block_size: - cmp r1, #0x08000000 - - /* The first block is 128MB, so there is no further memory. Return it - * now. - */ - ldreq r0, =0x08000000 - ldreq r1, =0x00000000 - ldreq r2, =0x00000001 - moveq pc, lr - - /* Save the block size, set the block address bits to zero, and - * initialize the block count to one. - */ - mov r3, r1 - ldr r4, =0x00000000 - ldr r5, =0x00000001 - - /* Look for additional blocks of memory by searching for non-aliases. */ -find_blocks: - /* Store zero back to address zero. It may be overwritten. */ - str r0, [r0] - - /* Advance to the next power of two boundary. */ - mov r1, r1, lsl #1 - - /* Store the offset at the current offset. */ - str r1, [r0, r1] - - /* Read back from zero. */ - ldr r2, [r0] - - /* See if a non-alias was found. */ - cmp r1, r2 - - /* If a non-alias was found, then or in the block address bit and - * multiply the block count by two (since there are two unique - * blocks, one with this bit zero and one with it one). - */ - orrne r4, r4, r1 - movne r5, r5, lsl #1 - - /* Continue searching if there are more address bits to check. */ - cmp r1, #0x08000000 - bne find_blocks - - /* Return the block size, address mask, and count. */ - mov r0, r3 - mov r1, r4 - mov r2, r5 - - /* Return to the caller. */ - mov pc, lr - - -.globl lowlevel_init -lowlevel_init: - - mov r6, lr - - /* Make sure caches are off and invalidated. */ - ldr r0, =0x00000000 - mcr p15, 0, r0, c1, c0, 0 - nop - nop - nop - nop - nop - - /* Turn off the green LED and turn on the red LED. If the red LED - * is left on for too long, the external reset circuit described - * by application note AN258 will cause the system to reset. - */ - ldr r1, =EP93XX_LED_DATA - ldr r0, [r1] - bic r0, r0, #EP93XX_LED_GREEN_ON - orr r0, r0, #EP93XX_LED_RED_ON - str r0, [r1] - - /* Undo the silly static memory controller programming performed - * by the boot rom. - */ - ldr r0, =SMC_BASE - - /* Set WST1 and WST2 to 31 HCLK cycles (slowest access) */ - ldr r1, =0x0000fbe0 - - /* Reset EP93XX_OFF_SMCBCR0 */ - ldr r2, [r0] - orr r2, r2, r1 - str r2, [r0] - - ldr r2, [r0, #EP93XX_OFF_SMCBCR1] - orr r2, r2, r1 - str r2, [r0, #EP93XX_OFF_SMCBCR1] - - ldr r2, [r0, #EP93XX_OFF_SMCBCR2] - orr r2, r2, r1 - str r2, [r0, #EP93XX_OFF_SMCBCR2] - - ldr r2, [r0, #EP93XX_OFF_SMCBCR3] - orr r2, r2, r1 - str r2, [r0, #EP93XX_OFF_SMCBCR3] - - ldr r2, [r0, #EP93XX_OFF_SMCBCR6] - orr r2, r2, r1 - str r2, [r0, #EP93XX_OFF_SMCBCR6] - - ldr r2, [r0, #EP93XX_OFF_SMCBCR7] - orr r2, r2, r1 - str r2, [r0, #EP93XX_OFF_SMCBCR7] - - /* Set the PLL1 and processor clock. */ - ldr r0, =SYSCON_BASE -#ifdef CONFIG_EDB9301 - /* 332MHz, giving a 166MHz processor clock. */ - ldr r1, = 0x02b49907 -#else - -#ifdef CONFIG_EDB93XX_INDUSTRIAL - /* 384MHz, giving a 196MHz processor clock. */ - ldr r1, =0x02a4bb38 -#else - /* 400MHz, giving a 200MHz processor clock. */ - ldr r1, =0x02a4e39e -#endif -#endif - str r1, [r0, #SYSCON_OFF_CLKSET1] - - nop - nop - nop - nop - nop - - /* Need to make sure that SDRAM is configured correctly before - * coping the code into it. - */ - -#ifdef CONFIG_EDB93XX_SDCS0 - mov r11, #SDRAM_DEVCFG0_BASE -#endif -#ifdef CONFIG_EDB93XX_SDCS1 - mov r11, #SDRAM_DEVCFG1_BASE -#endif -#ifdef CONFIG_EDB93XX_SDCS2 - mov r11, #SDRAM_DEVCFG2_BASE -#endif -#ifdef CONFIG_EDB93XX_SDCS3 - ldr r0, =SYSCON_BASE - ldr r0, [r0, #SYSCON_OFF_SYSCFG] - ands r0, r0, #SYSCON_SYSCFG_LASDO - moveq r11, #SDRAM_DEVCFG3_ASD0_BASE - movne r11, #SDRAM_DEVCFG3_ASD1_BASE -#endif - /* See Table 13-5 in EP93xx datasheet for more info about DRAM - * register mapping */ - - /* Try a 32-bit wide configuration of SDRAM. */ - ldr r0, =(EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT | \ - EP93XX_SDRAMCTRL_DEVCFG_SROMLL | \ - EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 | \ - EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2) - - /* Set burst count: 4 and CAS: 2 - * Burst mode [A11:A10]; CAS [A16:A14] - */ - orr r2, r11, #0x00008800 - bl ep93xx_sdram_config - - /* Test the SDRAM. */ - mov r0, r11 - bl ep93xx_sdram_test - cmp r0, #0x00000000 - beq ep93xx_sdram_done - - /* Try a 16-bit wide configuration of SDRAM. */ - ldr r0, =(EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT | \ - EP93XX_SDRAMCTRL_DEVCFG_SROMLL | \ - EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 | \ - EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2 | \ - EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH) - - /* Set burst count: 8, CAS: 2, sequential burst - * Accoring to Table 13-3 for 16bit operations mapping must be shifted. - * Burst mode [A10:A9]; CAS [A15:A13] - */ - orr r2, r11, #0x00004600 - bl ep93xx_sdram_config - - /* Test the SDRAM. */ - mov r0, r11 - bl ep93xx_sdram_test - cmp r0, #0x00000000 - beq ep93xx_sdram_done - - /* Turn off the red LED. */ - ldr r0, =EP93XX_LED_DATA - ldr r1, [r0] - bic r1, r1, #EP93XX_LED_RED_ON - str r1, [r0] - - /* There is no SDRAM so flash the green LED. */ -flash_green: - orr r1, r1, #EP93XX_LED_GREEN_ON - str r1, [r0] - ldr r2, =0x00010000 -flash_green_delay_1: - subs r2, r2, #1 - bne flash_green_delay_1 - bic r1, r1, #EP93XX_LED_GREEN_ON - str r1, [r0] - ldr r2, =0x00010000 -flash_green_delay_2: - subs r2, r2, #1 - bne flash_green_delay_2 - orr r1, r1, #EP93XX_LED_GREEN_ON - str r1, [r0] - ldr r2, =0x00010000 -flash_green_delay_3: - subs r2, r2, #1 - bne flash_green_delay_3 - bic r1, r1, #EP93XX_LED_GREEN_ON - str r1, [r0] - ldr r2, =0x00050000 -flash_green_delay_4: - subs r2, r2, #1 - bne flash_green_delay_4 - b flash_green - - -ep93xx_sdram_done: - ldr r1, =EP93XX_LED_DATA - ldr r0, [r1] - bic r0, r0, #EP93XX_LED_RED_ON - str r0, [r1] - - /* Determine the size of the SDRAM. */ - mov r0, r11 - bl ep93xx_sdram_size - - /* Save the SDRAM characteristics. */ - mov r8, r0 - mov r9, r1 - mov r10, r2 - - /* Compute total memory size into r1 */ - mul r1, r8, r10 -#ifdef CONFIG_EDB93XX_SDCS0 - ldr r2, [r0, #SDRAM_OFF_DEVCFG0] -#endif -#ifdef CONFIG_EDB93XX_SDCS1 - ldr r2, [r0, #SDRAM_OFF_DEVCFG1] -#endif -#ifdef CONFIG_EDB93XX_SDCS2 - ldr r2, [r0, #SDRAM_OFF_DEVCFG2] -#endif -#ifdef CONFIG_EDB93XX_SDCS3 - ldr r2, [r0, #SDRAM_OFF_DEVCFG3] -#endif - - /* Consider small DRAM size as: - * < 32Mb for 32bit bus - * < 64Mb for 16bit bus - */ - tst r2, #EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH - moveq r1, r1, lsr #1 - cmp r1, #0x02000000 - -#if defined(CONFIG_EDB9301) - /* Set refresh counter to 20ms for small DRAM size, otherwise 9.6ms */ - movlt r1, #0x03f0 - movge r1, #0x01e0 -#else - /* Set refresh counter to 30.7ms for small DRAM size, otherwise 15ms */ - movlt r1, #0x0600 - movge r1, #0x2f0 -#endif - str r1, [r0, #SDRAM_OFF_REFRSHTIMR] - - /* Save the memory configuration information. */ - orr r0, r11, #UBOOT_MEMORYCNF_BANK_SIZE - stmia r0, {r8-r11} - - mov lr, r6 - mov pc, lr diff --git a/arch/arm/cpu/arm920t/ep93xx/speed.c b/arch/arm/cpu/arm920t/ep93xx/speed.c deleted file mode 100644 index 8dd3904..0000000 --- a/arch/arm/cpu/arm920t/ep93xx/speed.c +++ /dev/null @@ -1,96 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Cirrus Logic EP93xx PLL support. - * - * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net> - */ - -#include <common.h> -#include <clock_legacy.h> -#include <asm/arch/ep93xx.h> -#include <asm/io.h> -#include <div64.h> - -/* - * get_board_sys_clk() should be defined as the input frequency of the PLL. - * - * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of - * the specified bus in HZ. - */ - -/* - * return the PLL output frequency - * - * PLL rate = get_board_sys_clk() * (X1FBD + 1) * (X2FBD + 1) - * / (X2IPD + 1) / 2^PS - */ -static ulong get_PLLCLK(uint32_t *pllreg) -{ - uint8_t i; - const uint32_t clkset = readl(pllreg); - uint64_t rate = get_board_sys_clk(); - rate *= ((clkset >> SYSCON_CLKSET_PLL_X1FBD1_SHIFT) & 0x1f) + 1; - rate *= ((clkset >> SYSCON_CLKSET_PLL_X2FBD2_SHIFT) & 0x3f) + 1; - do_div(rate, (clkset & 0x1f) + 1); /* X2IPD */ - for (i = 0; i < ((clkset >> SYSCON_CLKSET_PLL_PS_SHIFT) & 3); i++) - rate >>= 1; - - return (ulong)rate; -} - -/* return FCLK frequency */ -ulong get_FCLK(void) -{ - const uint8_t fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 }; - struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; - - const uint32_t clkset1 = readl(&syscon->clkset1); - const uint8_t fclk_div = - fclk_divisors[(clkset1 >> SYSCON_CLKSET1_FCLK_DIV_SHIFT) & 7]; - const ulong fclk_rate = get_PLLCLK(&syscon->clkset1) / fclk_div; - - return fclk_rate; -} - -/* return HCLK frequency */ -ulong get_HCLK(void) -{ - const uint8_t hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 }; - struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; - - const uint32_t clkset1 = readl(&syscon->clkset1); - const uint8_t hclk_div = - hclk_divisors[(clkset1 >> SYSCON_CLKSET1_HCLK_DIV_SHIFT) & 7]; - const ulong hclk_rate = get_PLLCLK(&syscon->clkset1) / hclk_div; - - return hclk_rate; -} - -/* return PCLK frequency */ -ulong get_PCLK(void) -{ - const uint8_t pclk_divisors[] = { 1, 2, 4, 8 }; - struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; - - const uint32_t clkset1 = readl(&syscon->clkset1); - const uint8_t pclk_div = - pclk_divisors[(clkset1 >> SYSCON_CLKSET1_PCLK_DIV_SHIFT) & 3]; - const ulong pclk_rate = get_HCLK() / pclk_div; - - return pclk_rate; -} - -/* return UCLK frequency */ -ulong get_UCLK(void) -{ - struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; - ulong uclk_rate; - - const uint32_t value = readl(&syscon->pwrcnt); - if (value & SYSCON_PWRCNT_UART_BAUD) - uclk_rate = get_board_sys_clk(); - else - uclk_rate = get_board_sys_clk() / 2; - - return uclk_rate; -} diff --git a/arch/arm/cpu/arm920t/ep93xx/timer.c b/arch/arm/cpu/arm920t/ep93xx/timer.c deleted file mode 100644 index 892bb06..0000000 --- a/arch/arm/cpu/arm920t/ep93xx/timer.c +++ /dev/null @@ -1,117 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Cirrus Logic EP93xx timer support. - * - * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net> - * - * Copyright (C) 2004, 2005 - * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com> - * - * Based on the original intr.c Cirrus Logic EP93xx Rev D. interrupt support, - * author unknown. - */ - -#include <common.h> -#include <init.h> -#include <time.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <asm/arch/ep93xx.h> -#include <asm/io.h> -#include <div64.h> - -#define TIMER_CLKSEL (1 << 3) -#define TIMER_ENABLE (1 << 7) - -#define TIMER_FREQ 508469 /* ticks / second */ -#define TIMER_MAX_VAL 0xFFFFFFFF - -static struct ep93xx_timer -{ - unsigned long long ticks; - unsigned long last_read; -} timer; - -static inline unsigned long long usecs_to_ticks(unsigned long usecs) -{ - unsigned long long ticks = (unsigned long long)usecs * TIMER_FREQ; - do_div(ticks, 1000 * 1000); - - return ticks; -} - -static inline void read_timer(void) -{ - struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE; - const unsigned long now = TIMER_MAX_VAL - readl(&timer_regs->timer3.value); - - if (now >= timer.last_read) - timer.ticks += now - timer.last_read; - else - /* an overflow occurred */ - timer.ticks += TIMER_MAX_VAL - timer.last_read + now; - - timer.last_read = now; -} - -/* - * Get the number of ticks (in CONFIG_SYS_HZ resolution) - */ -unsigned long long get_ticks(void) -{ - unsigned long long sys_ticks; - - read_timer(); - - sys_ticks = timer.ticks * CONFIG_SYS_HZ; - do_div(sys_ticks, TIMER_FREQ); - - return sys_ticks; -} - -unsigned long get_timer(unsigned long base) -{ - return get_ticks() - base; -} - -void __udelay(unsigned long usec) -{ - unsigned long long target; - - read_timer(); - - target = timer.ticks + usecs_to_ticks(usec); - - while (timer.ticks < target) - read_timer(); -} - -int timer_init(void) -{ - struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE; - - /* use timer 3 with 508KHz and free running, not enabled now */ - writel(TIMER_CLKSEL, &timer_regs->timer3.control); - - /* set initial timer value */ - writel(TIMER_MAX_VAL, &timer_regs->timer3.load); - - /* Enable the timer */ - writel(TIMER_ENABLE | TIMER_CLKSEL, - &timer_regs->timer3.control); - - /* Reset the timer */ - read_timer(); - timer.ticks = 0; - - return 0; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -unsigned long get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} diff --git a/arch/arm/include/asm/arch-ep93xx/ep93xx.h b/arch/arm/include/asm/arch-ep93xx/ep93xx.h deleted file mode 100644 index 272b644..0000000 --- a/arch/arm/include/asm/arch-ep93xx/ep93xx.h +++ /dev/null @@ -1,666 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Cirrus Logic EP93xx register definitions. - * - * Copyright (C) 2013 - * Sergey Kostanbaev <sergey.kostanbaev <at> fairwaves.ru> - * - * Copyright (C) 2009 - * Matthias Kaehlcke <matthias@kaehlcke.net> - * - * Copyright (C) 2006 - * Dominic Rath <Dominic.Rath@gmx.de> - * - * Copyright (C) 2004, 2005 - * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com> - * - * Based in large part on linux/include/asm-arm/arch-ep93xx/regmap.h, which is - * - * Copyright (C) 2004 Ray Lehtiniemi - * Copyright (C) 2003 Cirrus Logic, Inc - * Copyright (C) 1999 ARM Limited. - */ - -#define EP93XX_AHB_BASE 0x80000000 -#define EP93XX_APB_BASE 0x80800000 - -/* - * 0x80000000 - 0x8000FFFF: DMA - */ -#define DMA_OFFSET 0x000000 -#define DMA_BASE (EP93XX_AHB_BASE | DMA_OFFSET) - -#ifndef __ASSEMBLY__ -struct dma_channel { - uint32_t control; - uint32_t interrupt; - uint32_t ppalloc; - uint32_t status; - uint32_t reserved0; - uint32_t remain; - uint32_t reserved1[2]; - uint32_t maxcnt0; - uint32_t base0; - uint32_t current0; - uint32_t reserved2; - uint32_t maxcnt1; - uint32_t base1; - uint32_t current1; - uint32_t reserved3; -}; - -struct dma_regs { - struct dma_channel m2p_channel_0; - struct dma_channel m2p_channel_1; - struct dma_channel m2p_channel_2; - struct dma_channel m2p_channel_3; - struct dma_channel m2m_channel_0; - struct dma_channel m2m_channel_1; - struct dma_channel reserved0[2]; - struct dma_channel m2p_channel_5; - struct dma_channel m2p_channel_4; - struct dma_channel m2p_channel_7; - struct dma_channel m2p_channel_6; - struct dma_channel m2p_channel_9; - struct dma_channel m2p_channel_8; - uint32_t channel_arbitration; - uint32_t reserved[15]; - uint32_t global_interrupt; -}; -#endif - -/* - * 0x80010000 - 0x8001FFFF: Ethernet MAC - */ -#define MAC_OFFSET 0x010000 -#define MAC_BASE (EP93XX_AHB_BASE | MAC_OFFSET) - -#ifndef __ASSEMBLY__ -struct mac_queue { - uint32_t badd; - union { /* deal with half-word aligned registers */ - uint32_t blen; - union { - uint16_t filler; - uint16_t curlen; - }; - }; - uint32_t curadd; -}; - -struct mac_regs { - uint32_t rxctl; - uint32_t txctl; - uint32_t testctl; - uint32_t reserved0; - uint32_t miicmd; - uint32_t miidata; - uint32_t miists; - uint32_t reserved1; - uint32_t selfctl; - uint32_t inten; - uint32_t intstsp; - uint32_t intstsc; - uint32_t reserved2[2]; - uint32_t diagad; - uint32_t diagdata; - uint32_t gt; - uint32_t fct; - uint32_t fcf; - uint32_t afp; - union { - struct { - uint32_t indad; - uint32_t indad_upper; - }; - uint32_t hashtbl; - }; - uint32_t reserved3[2]; - uint32_t giintsts; - uint32_t giintmsk; - uint32_t giintrosts; - uint32_t giintfrc; - uint32_t txcollcnt; - uint32_t rxmissnct; - uint32_t rxruntcnt; - uint32_t reserved4; - uint32_t bmctl; - uint32_t bmsts; - uint32_t rxbca; - uint32_t reserved5; - struct mac_queue rxdq; - uint32_t rxdqenq; - struct mac_queue rxstsq; - uint32_t rxstsqenq; - struct mac_queue txdq; - uint32_t txdqenq; - struct mac_queue txstsq; - uint32_t reserved6; - uint32_t rxbufthrshld; - uint32_t txbufthrshld; - uint32_t rxststhrshld; - uint32_t txststhrshld; - uint32_t rxdthrshld; - uint32_t txdthrshld; - uint32_t maxfrmlen; - uint32_t maxhdrlen; -}; -#endif - -#define SELFCTL_RWP (1 << 7) -#define SELFCTL_GPO0 (1 << 5) -#define SELFCTL_PUWE (1 << 4) -#define SELFCTL_PDWE (1 << 3) -#define SELFCTL_MIIL (1 << 2) -#define SELFCTL_RESET (1 << 0) - -#define INTSTS_RWI (1 << 30) -#define INTSTS_RXMI (1 << 29) -#define INTSTS_RXBI (1 << 28) -#define INTSTS_RXSQI (1 << 27) -#define INTSTS_TXLEI (1 << 26) -#define INTSTS_ECIE (1 << 25) -#define INTSTS_TXUHI (1 << 24) -#define INTSTS_MOI (1 << 18) -#define INTSTS_TXCOI (1 << 17) -#define INTSTS_RXROI (1 << 16) -#define INTSTS_MIII (1 << 12) -#define INTSTS_PHYI (1 << 11) -#define INTSTS_TI (1 << 10) -#define INTSTS_AHBE (1 << 8) -#define INTSTS_OTHER (1 << 4) -#define INTSTS_TXSQ (1 << 3) -#define INTSTS_RXSQ (1 << 2) - -#define BMCTL_MT (1 << 13) -#define BMCTL_TT (1 << 12) -#define BMCTL_UNH (1 << 11) -#define BMCTL_TXCHR (1 << 10) -#define BMCTL_TXDIS (1 << 9) -#define BMCTL_TXEN (1 << 8) -#define BMCTL_EH2 (1 << 6) -#define BMCTL_EH1 (1 << 5) -#define BMCTL_EEOB (1 << 4) -#define BMCTL_RXCHR (1 << 2) -#define BMCTL_RXDIS (1 << 1) -#define BMCTL_RXEN (1 << 0) - -#define BMSTS_TXACT (1 << 7) -#define BMSTS_TP (1 << 4) -#define BMSTS_RXACT (1 << 3) -#define BMSTS_QID_MASK 0x07 -#define BMSTS_QID_RXDATA 0x00 -#define BMSTS_QID_TXDATA 0x01 -#define BMSTS_QID_RXSTS 0x02 -#define BMSTS_QID_TXSTS 0x03 -#define BMSTS_QID_RXDESC 0x04 -#define BMSTS_QID_TXDESC 0x05 - -#define AFP_MASK 0x07 -#define AFP_IAPRIMARY 0x00 -#define AFP_IASECONDARY1 0x01 -#define AFP_IASECONDARY2 0x02 -#define AFP_IASECONDARY3 0x03 -#define AFP_TX 0x06 -#define AFP_HASH 0x07 - -#define RXCTL_PAUSEA (1 << 20) -#define RXCTL_RXFCE1 (1 << 19) -#define RXCTL_RXFCE0 (1 << 18) -#define RXCTL_BCRC (1 << 17) -#define RXCTL_SRXON (1 << 16) -#define RXCTL_RCRCA (1 << 13) -#define RXCTL_RA (1 << 12) -#define RXCTL_PA (1 << 11) -#define RXCTL_BA (1 << 10) -#define RXCTL_MA (1 << 9) -#define RXCTL_IAHA (1 << 8) -#define RXCTL_IA3 (1 << 3) -#define RXCTL_IA2 (1 << 2) -#define RXCTL_IA1 (1 << 1) -#define RXCTL_IA0 (1 << 0) - -#define TXCTL_DEFDIS (1 << 7) -#define TXCTL_MBE (1 << 6) -#define TXCTL_ICRC (1 << 5) -#define TXCTL_TPD (1 << 4) -#define TXCTL_OCOLL (1 << 3) -#define TXCTL_SP (1 << 2) -#define TXCTL_PB (1 << 1) -#define TXCTL_STXON (1 << 0) - -#define MIICMD_REGAD_MASK (0x001F) -#define MIICMD_PHYAD_MASK (0x03E0) -#define MIICMD_OPCODE_MASK (0xC000) -#define MIICMD_PHYAD_8950 (0x0000) -#define MIICMD_OPCODE_READ (0x8000) -#define MIICMD_OPCODE_WRITE (0x4000) - -#define MIISTS_BUSY (1 << 0) - -/* - * 0x80020000 - 0x8002FFFF: USB OHCI - */ -#define USB_OFFSET 0x020000 -#define USB_BASE (EP93XX_AHB_BASE | USB_OFFSET) - -/* - * 0x80030000 - 0x8003FFFF: Raster engine - */ -#if (defined(CONFIG_EP9307) || defined(CONFIG_EP9312) || defined(CONFIG_EP9315)) -#define RASTER_OFFSET 0x030000 -#define RASTER_BASE (EP93XX_AHB_BASE | RASTER_OFFSET) -#endif - -/* - * 0x80040000 - 0x8004FFFF: Graphics accelerator - */ -#if defined(CONFIG_EP9315) -#define GFX_OFFSET 0x040000 -#define GFX_BASE (EP93XX_AHB_BASE | GFX_OFFSET) -#endif - -/* - * 0x80050000 - 0x8005FFFF: Reserved - */ - -/* - * 0x80060000 - 0x8006FFFF: SDRAM controller - */ -#define SDRAM_OFFSET 0x060000 -#define SDRAM_BASE (EP93XX_AHB_BASE | SDRAM_OFFSET) - -#ifndef __ASSEMBLY__ -struct sdram_regs { - uint32_t reserved; - uint32_t glconfig; - uint32_t refrshtimr; - uint32_t bootsts; - uint32_t devcfg0; - uint32_t devcfg1; - uint32_t devcfg2; - uint32_t devcfg3; -}; -#endif - -#define SDRAM_DEVCFG_EXTBUSWIDTH (1 << 2) -#define SDRAM_DEVCFG_BANKCOUNT (1 << 3) -#define SDRAM_DEVCFG_SROMLL (1 << 5) -#define SDRAM_DEVCFG_CASLAT_2 0x00010000 -#define SDRAM_DEVCFG_RASTOCAS_2 0x00200000 - -#define SDRAM_OFF_GLCONFIG 0x0004 -#define SDRAM_OFF_REFRSHTIMR 0x0008 - -#define SDRAM_OFF_DEVCFG0 0x0010 -#define SDRAM_OFF_DEVCFG1 0x0014 -#define SDRAM_OFF_DEVCFG2 0x0018 -#define SDRAM_OFF_DEVCFG3 0x001C - -#define SDRAM_DEVCFG0_BASE 0xC0000000 -#define SDRAM_DEVCFG1_BASE 0xD0000000 -#define SDRAM_DEVCFG2_BASE 0xE0000000 -#define SDRAM_DEVCFG3_ASD0_BASE 0xF0000000 -#define SDRAM_DEVCFG3_ASD1_BASE 0x00000000 - -#define GLCONFIG_INIT (1 << 0) -#define GLCONFIG_MRS (1 << 1) -#define GLCONFIG_SMEMBUSY (1 << 5) -#define GLCONFIG_LCR (1 << 6) -#define GLCONFIG_REARBEN (1 << 7) -#define GLCONFIG_CLKSHUTDOWN (1 << 30) -#define GLCONFIG_CKE (1 << 31) - -#define EP93XX_SDRAMCTRL 0x80060000 -#define EP93XX_SDRAMCTRL_GLOBALCFG_INIT 0x00000001 -#define EP93XX_SDRAMCTRL_GLOBALCFG_MRS 0x00000002 -#define EP93XX_SDRAMCTRL_GLOBALCFG_SMEMBUSY 0x00000020 -#define EP93XX_SDRAMCTRL_GLOBALCFG_LCR 0x00000040 -#define EP93XX_SDRAMCTRL_GLOBALCFG_REARBEN 0x00000080 -#define EP93XX_SDRAMCTRL_GLOBALCFG_CLKSHUTDOWN 0x40000000 -#define EP93XX_SDRAMCTRL_GLOBALCFG_CKE 0x80000000 - -#define EP93XX_SDRAMCTRL_REFRESH_MASK 0x0000FFFF - -#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_32 0x00000002 -#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_16 0x00000001 -#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_8 0x00000000 -#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_MASK 0x00000003 -#define EP93XX_SDRAMCTRL_BOOTSTATUS_MEDIA 0x00000004 - -#define EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH 0x00000004 -#define EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT 0x00000008 -#define EP93XX_SDRAMCTRL_DEVCFG_SROM512 0x00000010 -#define EP93XX_SDRAMCTRL_DEVCFG_SROMLL 0x00000020 -#define EP93XX_SDRAMCTRL_DEVCFG_2KPAGE 0x00000040 -#define EP93XX_SDRAMCTRL_DEVCFG_SFCONFIGADDR 0x00000080 -#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_MASK 0x00070000 -#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 0x00010000 -#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_3 0x00020000 -#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_4 0x00030000 -#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_5 0x00040000 -#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_6 0x00050000 -#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_7 0x00060000 -#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_8 0x00070000 -#define EP93XX_SDRAMCTRL_DEVCFG_WBL 0x00080000 -#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_MASK 0x00300000 -#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2 0x00200000 -#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_3 0x00300000 -#define EP93XX_SDRAMCTRL_DEVCFG_AUTOPRECHARGE 0x01000000 - -/* - * 0x80070000 - 0x8007FFFF: Reserved - */ - -/* - * 0x80080000 - 0x8008FFFF: SRAM controller & PCMCIA - */ -#define SMC_OFFSET 0x080000 -#define SMC_BASE (EP93XX_AHB_BASE | SMC_OFFSET) - -#ifndef __ASSEMBLY__ -struct smc_regs { - uint32_t bcr0; - uint32_t bcr1; - uint32_t bcr2; - uint32_t bcr3; - uint32_t reserved0[2]; - uint32_t bcr6; - uint32_t bcr7; -#if defined(CONFIG_EP9315) - uint32_t pcattribute; - uint32_t pccommon; - uint32_t pcio; - uint32_t reserved1[5]; - uint32_t pcmciactrl; -#endif -}; -#endif - -#define EP93XX_OFF_SMCBCR0 0x00 -#define EP93XX_OFF_SMCBCR1 0x04 -#define EP93XX_OFF_SMCBCR2 0x08 -#define EP93XX_OFF_SMCBCR3 0x0C -#define EP93XX_OFF_SMCBCR6 0x18 -#define EP93XX_OFF_SMCBCR7 0x1C - -#define SMC_BCR_IDCY_SHIFT 0 -#define SMC_BCR_WST1_SHIFT 5 -#define SMC_BCR_BLE (1 << 10) -#define SMC_BCR_WST2_SHIFT 11 -#define SMC_BCR_MW_SHIFT 28 - -/* - * 0x80090000 - 0x8009FFFF: Boot ROM - */ - -/* - * 0x800A0000 - 0x800AFFFF: IDE interface - */ - -/* - * 0x800B0000 - 0x800BFFFF: VIC1 - */ - -/* - * 0x800C0000 - 0x800CFFFF: VIC2 - */ - -/* - * 0x800D0000 - 0x800FFFFF: Reserved - */ - -/* - * 0x80800000 - 0x8080FFFF: Reserved - */ - -/* - * 0x80810000 - 0x8081FFFF: Timers - */ -#define TIMER_OFFSET 0x010000 -#define TIMER_BASE (EP93XX_APB_BASE | TIMER_OFFSET) - -#ifndef __ASSEMBLY__ -struct timer { - uint32_t load; - uint32_t value; - uint32_t control; - uint32_t clear; -}; - -struct timer4 { - uint32_t value_low; - uint32_t value_high; -}; - -struct timer_regs { - struct timer timer1; - uint32_t reserved0[4]; - struct timer timer2; - uint32_t reserved1[12]; - struct timer4 timer4; - uint32_t reserved2[6]; - struct timer timer3; -}; -#endif - -/* - * 0x80820000 - 0x8082FFFF: I2S - */ -#define I2S_OFFSET 0x020000 -#define I2S_BASE (EP93XX_APB_BASE | I2S_OFFSET) - -/* - * 0x80830000 - 0x8083FFFF: Security - */ -#define SECURITY_OFFSET 0x030000 -#define SECURITY_BASE (EP93XX_APB_BASE | SECURITY_OFFSET) - -#define EXTENSIONID (SECURITY_BASE + 0x2714) - -/* - * 0x80840000 - 0x8084FFFF: GPIO - */ -#define GPIO_OFFSET 0x040000 -#define GPIO_BASE (EP93XX_APB_BASE | GPIO_OFFSET) - -#ifndef __ASSEMBLY__ -struct gpio_int { - uint32_t inttype1; - uint32_t inttype2; - uint32_t eoi; - uint32_t inten; - uint32_t intsts; - uint32_t rawintsts; - uint32_t db; -}; - -struct gpio_regs { - uint32_t padr; - uint32_t pbdr; - uint32_t pcdr; - uint32_t pddr; - uint32_t paddr; - uint32_t pbddr; - uint32_t pcddr; - uint32_t pdddr; - uint32_t pedr; - uint32_t peddr; - uint32_t reserved0[2]; - uint32_t pfdr; - uint32_t pfddr; - uint32_t pgdr; - uint32_t pgddr; - uint32_t phdr; - uint32_t phddr; - uint32_t reserved1; - uint32_t finttype1; - uint32_t finttype2; - uint32_t reserved2; - struct gpio_int pfint; - uint32_t reserved3[10]; - struct gpio_int paint; - struct gpio_int pbint; - uint32_t eedrive; -}; -#endif - -#define EP93XX_LED_DATA 0x80840020 -#define EP93XX_LED_GREEN_ON 0x0001 -#define EP93XX_LED_RED_ON 0x0002 - -#define EP93XX_LED_DDR 0x80840024 -#define EP93XX_LED_GREEN_ENABLE 0x0001 -#define EP93XX_LED_RED_ENABLE 0x00020000 - -/* - * 0x80850000 - 0x8087FFFF: Reserved - */ - -/* - * 0x80880000 - 0x8088FFFF: AAC - */ -#define AAC_OFFSET 0x080000 -#define AAC_BASE (EP93XX_APB_BASE | AAC_OFFSET) - -/* - * 0x80890000 - 0x8089FFFF: Reserved - */ - -/* - * 0x808A0000 - 0x808AFFFF: SPI - */ -#define SPI_OFFSET 0x0A0000 -#define SPI_BASE (EP93XX_APB_BASE | SPI_OFFSET) - -/* - * 0x808B0000 - 0x808BFFFF: IrDA - */ -#define IRDA_OFFSET 0x0B0000 -#define IRDA_BASE (EP93XX_APB_BASE | IRDA_OFFSET) - -/* - * 0x808C0000 - 0x808CFFFF: UART1 - */ -#define UART1_OFFSET 0x0C0000 -#define UART1_BASE (EP93XX_APB_BASE | UART1_OFFSET) - -/* - * 0x808D0000 - 0x808DFFFF: UART2 - */ -#define UART2_OFFSET 0x0D0000 -#define UART2_BASE (EP93XX_APB_BASE | UART2_OFFSET) - -/* - * 0x808E0000 - 0x808EFFFF: UART3 - */ -#define UART3_OFFSET 0x0E0000 -#define UART3_BASE (EP93XX_APB_BASE | UART3_OFFSET) - -/* - * 0x808F0000 - 0x808FFFFF: Key Matrix - */ -#define KEY_OFFSET 0x0F0000 -#define KEY_BASE (EP93XX_APB_BASE | KEY_OFFSET) - -/* - * 0x80900000 - 0x8090FFFF: Touchscreen - */ -#define TOUCH_OFFSET 0x900000 -#define TOUCH_BASE (EP93XX_APB_BASE | TOUCH_OFFSET) - -/* - * 0x80910000 - 0x8091FFFF: Pulse Width Modulation - */ -#define PWM_OFFSET 0x910000 -#define PWM_BASE (EP93XX_APB_BASE | PWM_OFFSET) - -/* - * 0x80920000 - 0x8092FFFF: Real time clock - */ -#define RTC_OFFSET 0x920000 -#define RTC_BASE (EP93XX_APB_BASE | RTC_OFFSET) - -/* - * 0x80930000 - 0x8093FFFF: Syscon - */ -#define SYSCON_OFFSET 0x930000 -#define SYSCON_BASE (EP93XX_APB_BASE | SYSCON_OFFSET) - -/* Security */ -#define SECURITY_EXTENSIONID 0x80832714 - -#ifndef __ASSEMBLY__ -struct syscon_regs { - uint32_t pwrsts; - uint32_t pwrcnt; - uint32_t halt; - uint32_t stby; - uint32_t reserved0[2]; - uint32_t teoi; - uint32_t stfclr; - uint32_t clkset1; - uint32_t clkset2; - uint32_t reserved1[6]; - uint32_t scratch0; - uint32_t scratch1; - uint32_t reserved2[2]; - uint32_t apbwait; - uint32_t bustmstrarb; - uint32_t bootmodeclr; - uint32_t reserved3[9]; - uint32_t devicecfg; - uint32_t vidclkdiv; - uint32_t mirclkdiv; - uint32_t i2sclkdiv; - uint32_t keytchclkdiv; - uint32_t chipid; - uint32_t reserved4; - uint32_t syscfg; - uint32_t reserved5[8]; - uint32_t sysswlock; -}; -#else -#define SYSCON_SCRATCH0 (SYSCON_BASE + 0x0040) -#endif - -#define SYSCON_OFF_CLKSET1 0x0020 -#define SYSCON_OFF_SYSCFG 0x009c - -#define SYSCON_PWRCNT_UART_BAUD (1 << 29) -#define SYSCON_PWRCNT_USH_EN (1 << 28) - -#define SYSCON_CLKSET_PLL_X2IPD_SHIFT 0 -#define SYSCON_CLKSET_PLL_X2FBD2_SHIFT 5 -#define SYSCON_CLKSET_PLL_X1FBD1_SHIFT 11 -#define SYSCON_CLKSET_PLL_PS_SHIFT 16 -#define SYSCON_CLKSET1_PCLK_DIV_SHIFT 18 -#define SYSCON_CLKSET1_HCLK_DIV_SHIFT 20 -#define SYSCON_CLKSET1_NBYP1 (1 << 23) -#define SYSCON_CLKSET1_FCLK_DIV_SHIFT 25 - -#define SYSCON_CLKSET2_PLL2_EN (1 << 18) -#define SYSCON_CLKSET2_NBYP2 (1 << 19) -#define SYSCON_CLKSET2_USB_DIV_SHIFT 28 - -#define SYSCON_CHIPID_REV_MASK 0xF0000000 -#define SYSCON_DEVICECFG_SWRST (1 << 31) - -#define SYSCON_SYSCFG_LASDO 0x00000020 - -/* - * 0x80930000 - 0x8093FFFF: Watchdog Timer - */ -#define WATCHDOG_OFFSET 0x940000 -#define WATCHDOG_BASE (EP93XX_APB_BASE | WATCHDOG_OFFSET) - -/* - * 0x80950000 - 0x9000FFFF: Reserved - */ - -/* - * During low_level init we store memory layout in memory at specific location - */ -#define UBOOT_MEMORYCNF_BANK_SIZE 0x2000 -#define UBOOT_MEMORYCNF_BANK_MASK 0x2004 -#define UBOOT_MEMORYCNF_BANK_COUNT 0x2008 |