phy: marvell: a3700: Convert to official DT bindings in COMPHY driver

Convert A3720 common PHY driver to official DT bindings.

This puts us closer to be able to synchronize A3720 device-trees with
those from Linux.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Stefan Roese <sr@denx.de>

4 files changed, 31 insertions, 58 deletions

diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index cba6139..360d521 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -80,24 +80,6 @@
 	};
 };
 
-&comphy {
-	max-lanes = <3>;
-	phy0 {
-		phy-type = <COMPHY_TYPE_USB3_HOST0>;
-		phy-speed = <COMPHY_SPEED_5G>;
-	};
-
-	phy1 {
-		phy-type = <COMPHY_TYPE_PEX0>;
-		phy-speed = <COMPHY_SPEED_2_5G>;
-	};
-
-	phy2 {
-		phy-type = <COMPHY_TYPE_SATA0>;
-		phy-speed = <COMPHY_SPEED_5G>;
-	};
-};
-
 &eth0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -119,6 +101,7 @@
 /* CON3 */
 &sata {
 	status = "okay";
+	phys = <&comphy2 0>;
 };
 
 &sdhci0 {
@@ -200,6 +183,7 @@
 /* CON31 */
 &usb3 {
 	status = "okay";
+	phys = <&comphy0 0>;
 };
 
 &pcie0 {
@@ -207,4 +191,5 @@
 	pinctrl-0 = <&pcie_pins>;
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
+	phys = <&comphy1 0>;
 };
diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts
index f47ced0..d017570 100644
--- a/arch/arm/dts/armada-3720-turris-mox.dts
+++ b/arch/arm/dts/armada-3720-turris-mox.dts
@@ -94,24 +94,6 @@
 	};
 };
 
-&comphy {
-	max-lanes = <3>;
-	phy0 {
-		phy-type = <COMPHY_TYPE_SGMII1>;
-		phy-speed = <COMPHY_SPEED_3_125G>;
-	};
-
-	phy1 {
-		phy-type = <COMPHY_TYPE_PEX0>;
-		phy-speed = <COMPHY_SPEED_5G>;
-	};
-
-	phy2 {
-		phy-type = <COMPHY_TYPE_USB3_HOST0>;
-		phy-speed = <COMPHY_SPEED_5G>;
-	};
-};
-
 &eth0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -120,6 +102,11 @@
 	phy = <&eth_phy1>;
 };
 
+&eth1 {
+	phy-mode = "2500base-x";
+	phys = <&comphy0 1>;
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -222,6 +209,7 @@
 &usb3 {
 	vbus-supply = <&reg_usb3_vbus>;
 	status = "okay";
+	phys = <&comphy2 0>;
 };
 
 &pcie0 {
@@ -229,4 +217,5 @@
 	pinctrl-0 = <&pcie_pins>;
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	status = "disabled";
+	phys = <&comphy1 0>;
 };
diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 4bf6d2e..58557c6 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -106,36 +106,21 @@
 	};
 };
 
-&comphy {
-	phy0 {
-		phy-type = <COMPHY_TYPE_SGMII1>;
-		phy-speed = <COMPHY_SPEED_1_25G>;
-	};
-
-	phy1 {
-		phy-type = <COMPHY_TYPE_SGMII0>;
-		phy-speed = <COMPHY_SPEED_1_25G>;
-	};
-
-	phy2 {
-		phy-type = <COMPHY_TYPE_USB3_HOST1>;
-		phy-speed = <COMPHY_SPEED_5G>;
-	};
-};
-
 &eth0 {
 	pinctrl-0 = <&pcie_pins>;
 	status = "okay";
-	phy-mode = "2500base-x";
+	phy-mode = "sgmii";
 	managed = "in-band-status";
 	phy = <&ethphy0>;
+	phys = <&comphy1 0>;
 };
 
 &eth1 {
 	status = "okay";
-	phy-mode = "2500base-x";
+	phy-mode = "sgmii";
 	managed = "in-band-status";
 	phy = <&ethphy1>;
+	phys = <&comphy0 1>;
 };
 
 &i2c0 {
diff --git a/arch/arm/dts/armada-37xx.dtsi b/arch/arm/dts/armada-37xx.dtsi
index fec3460..bef6ef0 100644
--- a/arch/arm/dts/armada-37xx.dtsi
+++ b/arch/arm/dts/armada-37xx.dtsi
@@ -316,9 +316,23 @@
 				compatible = "marvell,mvebu-comphy", "marvell,comphy-armada-3700";
 				reg = <0x18300 0x28>,
 				      <0x1f300 0x3d000>;
-				mux-bitcount = <4>;
-				mux-lane-order = <1 0 2>;
-				max-lanes = <3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
 			};
 		};