diff options
author | Adam Ford <aford173@gmail.com> | 2022-01-22 12:27:33 -0600 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2022-02-05 15:49:01 +0100 |
commit | d81c6a9f6394098ba684595383c6e1d1fac775de (patch) | |
tree | 41375edbcdea4bc0273488c8e66bc2f7936c336b /arch | |
parent | 9376d799debb3d8fb9b5ddbb88dd21548e0157bc (diff) | |
download | u-boot-d81c6a9f6394098ba684595383c6e1d1fac775de.zip u-boot-d81c6a9f6394098ba684595383c6e1d1fac775de.tar.gz u-boot-d81c6a9f6394098ba684595383c6e1d1fac775de.tar.bz2 |
arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1
Resync the SOM and baseboar files with the device trees that will
be included in 5.17-RC1 when it's cut. This will improve pinmuxing
for USDHC1 and add USB functionality.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/dts/imx8mm-beacon-baseboard.dtsi | 36 | ||||
-rw-r--r-- | arch/arm/dts/imx8mm-beacon-som.dtsi | 7 |
2 files changed, 39 insertions, 4 deletions
diff --git a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi index d6b9ded..4097a66 100644 --- a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi @@ -43,6 +43,17 @@ enable-active-high; }; + reg_usbotg1: regulator-usbotg1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_otg1>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -102,7 +113,6 @@ compatible = "wlf,wm8962"; reg = <0x1a>; clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; - clock-names = "xclk"; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; @@ -170,6 +180,24 @@ status = "okay"; }; +&usbotg1 { + vbus-supply = <®_usbotg1>; + disable-over-current; + dr_mode="otg"; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + disable-over-current; + dr_mode="host"; + status = "okay"; +}; + +&usbphynop2 { + reset-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; @@ -216,6 +244,12 @@ >; }; + pinctrl_reg_usb_otg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 + >; + }; + pinctrl_sai3: sai3grp { fsl,pins = < MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 diff --git a/arch/arm/dts/imx8mm-beacon-som.dtsi b/arch/arm/dts/imx8mm-beacon-som.dtsi index d897913..cf07987 100644 --- a/arch/arm/dts/imx8mm-beacon-som.dtsi +++ b/arch/arm/dts/imx8mm-beacon-som.dtsi @@ -91,7 +91,7 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; spi-max-frequency = <80000000>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; }; }; @@ -256,12 +256,13 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <4>; non-removable; cap-power-off-card; - pm-ignore-notify; keep-power-in-suspend; mmc-pwrseq = <&usdhc1_pwrseq>; status = "okay"; |