arm: mvebu: Add Allied Telesis x240 board

The x240 and SE240 are a series of L2+ switches from Allied Telesis.
There are a number of them in the range but as far as U-Boot is
concerned all the CPU block components are the same so there's only one
board defined.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

3 files changed, 221 insertions, 1 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 17f506a..77ec79e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -305,7 +305,8 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	cn9132-db-B.dtb				\
 	cn9130-crb-A.dtb			\
 	cn9130-crb-B.dtb			\
-	ac5-98dx35xx-rd.dtb
+	ac5-98dx35xx-rd.dtb			\
+	ac5-98dx35xx-atl-x240.dtb
 endif
 
 dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
diff --git a/arch/arm/dts/ac5-98dx35xx-atl-x240.dts b/arch/arm/dts/ac5-98dx35xx-atl-x240.dts
new file mode 100644
index 0000000..820ec18
--- /dev/null
+++ b/arch/arm/dts/ac5-98dx35xx-atl-x240.dts
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "ac5-98dx35xx.dtsi"
+
+/ {
+	model = "Allied Telesis x240";
+	compatible = "alliedtelesis,x240", "marvell,ac5x", "marvell,ac5";
+
+	aliases {
+		serial0 = &uart0;
+		spiflash0 = &spiflash0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		spi0 = &spi0;
+		i2c0 = &i2c0;
+		usb0 = &usb0;
+		pinctrl0 = &pinctrl0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	boot-board {
+		compatible = "atl,boot-board";
+		present-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		override-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		fault {
+			label = "fault:red";
+			gpios = <&system_gpio 11 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&nand {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@user {
+			reg = <0x00000000 0x10000000>;
+			label = "user";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	mux@71 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;               /* MPP36 */
+		status = "okay";
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			hwmon@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+
+			rtc@68 {
+				compatible = "adi,max31331";
+				reg = <0x68>;
+			};
+
+			system_gpio: gpio@27 {
+				compatible = "nxp,pca9555";
+				gpio-controller;
+				#gpio-cells= <2>;
+				reg = <0x27>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <25 IRQ_TYPE_LEVEL_LOW>;   /* MPP25 */
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	spiflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+		spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&gpio0 {
+	phy-reset {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "phy-reset";
+	};
+
+	usb-en {
+		gpio-hog;
+		gpios = <28 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-en";
+	};
+
+	led-oe-n {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "led-oe-n";
+	};
+};
+
+&gpio1 {
+	nand-protect {
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "nand-protect";
+	};
+};
+
+&pinctrl0 {
+	/*
+	 * MPP Bus:              MPP#
+	 * NF_IO                 [0-7]
+	 * NF_Wen                [8]
+	 * NF_ALE                [9]
+	 * NF_CLE                [10]
+	 * NF_Cen                [11]
+	 * QSPI_SCK/SPI0_SCK     [12]
+	 * QSPI_CSn/SPI0_CSn     [13]
+	 * QSPI_DIO[0]/SPI0_MOSI [14]
+	 * QSPI_DIO[1]/SPI0_MISO [15]
+	 * NF_Ren                [16]
+	 * NF_RBn                [17]
+	 * WD_INTn               [18]
+	 * B_B_OVRIDE_N          [19]
+	 * GREEN_SW_N            [20]
+	 * PHY_INT_N[0]          [21]
+	 * SPI_WPn               [22]
+	 * LED_OE_N              [23]
+	 * USB_PWR_FLT_N         [24]
+	 * SFP_INT_N             [25]
+	 * I2C0_SCL              [26]
+	 * I2C0_SDA              [27]
+	 * USB_EN                [28]
+	 * MONITOR_INT_N         [29]
+	 * XM1_MDC               [30]
+	 * XM1_MDIO              [31]
+	 * UA0_RXD               [32]
+	 * UA0_TXD               [33]
+	 * PHY_RST0n             [34]
+	 * TPM_INT_N             [35]
+	 * I2CMUX_RESET_N        [36]
+	 * SPI_SRAM_SEL_N        [37]
+	 * B_B_PRESENT           [38]
+	 * SPI_FLASH_SEL_N       [39]
+	 * NF_WP_N               [40]
+	 * POE_INT_N             [41]
+	 * PoE_RST_N             [42]
+	 * LED0_CLK              [43]
+	 * LED0_STB              [44]
+	 * LED0_DATA             [45]
+	 */
+	/*	     0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 1    1    1    1    0xff 0xff 0    0
+		     0    0    0    0    0    0    1    1    0    0
+		     1    1    1    1    0    0    0    0    0    0
+		     0    0    0    1    1    1    >;
+
+	nand_pins: nand-pins {
+		marvell,pins = <0 1 2 3 4 5 6 7 8 9 10 11 16 17>;
+		marvell,function = <2>;
+	};
+};
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index ac484c7..5c7f4bf 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -202,6 +202,10 @@ config TARGET_X530
 	bool "Support Allied Telesis x530"
 	select 88F6820
 
+config TARGET_X240
+	bool "Support Allied Telesis x240"
+	select ALLEYCAT_5
+
 config TARGET_DB_XC3_24G4XG
 	bool "Support DB-XC3-24G4XG"
 	select 98DX3336
@@ -274,6 +278,7 @@ config SYS_BOARD
 	default "theadorable" if TARGET_THEADORABLE
 	default "a38x" if TARGET_CONTROLCENTERDC
 	default "x530" if TARGET_X530
+	default "x240" if TARGET_X240
 	default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
 	default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
 	default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
@@ -297,6 +302,7 @@ config SYS_CONFIG_NAME
 	default "turris_mox" if TARGET_TURRIS_MOX
 	default "controlcenterdc" if TARGET_CONTROLCENTERDC
 	default "x530" if TARGET_X530
+	default "x240" if TARGET_X240
 	default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
 	default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
 	default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
@@ -320,6 +326,7 @@ config SYS_VENDOR
 	default "CZ.NIC" if TARGET_TURRIS_MOX
 	default "gdsys" if TARGET_CONTROLCENTERDC
 	default "alliedtelesis" if TARGET_X530
+	default "alliedtelesis" if TARGET_X240
 	default "mikrotik" if TARGET_CRS3XX_98DX3236
 	default "Marvell" if TARGET_MVEBU_ALLEYCAT5