diff options
| author | Michal Simek <michal.simek@amd.com> | 2022-11-16 11:59:19 +0100 |
|---|---|---|
| committer | Michal Simek <michal.simek@amd.com> | 2022-11-22 15:02:07 +0100 |
| commit | 38920451c71844e2da82b4def8111a541997d649 (patch) | |
| tree | 7d616c6a26fdd541962f8d4fbccbe897f5417663 /arch/arm | |
| parent | 9dc51069f4dfc64f8b86565239c46995aad09dec (diff) | |
| download | u-boot-38920451c71844e2da82b4def8111a541997d649.zip u-boot-38920451c71844e2da82b4def8111a541997d649.tar.gz u-boot-38920451c71844e2da82b4def8111a541997d649.tar.bz2 | |
arm64: zynqmp: Describe TI phy as ethernet-phy-id with reset on zcu106
zcu106 also connects ethernet phy reset via tca6416 chip as is done on
other evaluation boards. That's why describe this connection to make sure
that ethernet phy is reset before it's use.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/21ccd672b799b5858021f6059098a1247c311fae.1668596358.git.michal.simek@amd.com
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/dts/zynqmp-zcu106-revA.dts | 19 |
1 files changed, 13 insertions, 6 deletions
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts index 3e13767..4858b4d 100644 --- a/arch/arm/dts/zynqmp-zcu106-revA.dts +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts @@ -200,12 +200,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + reg = <0xc>; + compatible = "ethernet-phy-id2000.a231"; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; + }; }; }; |