diff options
author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2017-07-13 20:32:15 +0900 |
---|---|---|
committer | Masahiro Yamada <yamada.masahiro@socionext.com> | 2017-07-26 22:27:15 +0900 |
commit | ee8d037ce7b5ece66d085c0e6b7793e6e3fbef5b (patch) | |
tree | 1bb03f8871c41c669f29f46c95ddce08e4eadd15 /arch/arm/mach-uniphier/boot-device/spl_board.c | |
parent | 609bf924117950b88987a5fa477acf1239bfdbc1 (diff) | |
download | u-boot-ee8d037ce7b5ece66d085c0e6b7793e6e3fbef5b.zip u-boot-ee8d037ce7b5ece66d085c0e6b7793e6e3fbef5b.tar.gz u-boot-ee8d037ce7b5ece66d085c0e6b7793e6e3fbef5b.tar.bz2 |
ARM: uniphier: remove SPL support for ARMv8 SoCs
It has been a while since ARM Trusted Firmware supported UniPhier SoC
family. U-Boot SPL was intended as a temporary loader that runs in
secure world. It is a maintenance headache to support two different
boot mechanisms. Secure firmware is realm of ARM Trusted Firmware
and now U-Boot only serves as a non-secure boot loader for UniPhier
ARMv8 SoCs.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Diffstat (limited to 'arch/arm/mach-uniphier/boot-device/spl_board.c')
-rw-r--r-- | arch/arm/mach-uniphier/boot-device/spl_board.c | 262 |
1 files changed, 0 insertions, 262 deletions
diff --git a/arch/arm/mach-uniphier/boot-device/spl_board.c b/arch/arm/mach-uniphier/boot-device/spl_board.c deleted file mode 100644 index bd47ac8..0000000 --- a/arch/arm/mach-uniphier/boot-device/spl_board.c +++ /dev/null @@ -1,262 +0,0 @@ -/* - * Copyright (C) 2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <spl.h> -#include <linux/bitops.h> -#include <linux/compat.h> -#include <linux/io.h> -#include <asm/processor.h> - -#include "../soc-info.h" - -#define MMC_CMD_SWITCH 6 -#define MMC_CMD_SELECT_CARD 7 -#define MMC_CMD_SEND_CSD 9 -#define MMC_CMD_READ_MULTIPLE_BLOCK 18 - -#define EXT_CSD_PART_CONF 179 /* R/W */ - -#define MMC_RSP_PRESENT BIT(0) -#define MMC_RSP_136 BIT(1) /* 136 bit response */ -#define MMC_RSP_CRC BIT(2) /* expect valid crc */ -#define MMC_RSP_BUSY BIT(3) /* card may send busy */ -#define MMC_RSP_OPCODE BIT(4) /* response contains opcode */ - -#define MMC_RSP_NONE (0) -#define MMC_RSP_R1 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE) -#define MMC_RSP_R1b (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE | \ - MMC_RSP_BUSY) -#define MMC_RSP_R2 (MMC_RSP_PRESENT | MMC_RSP_136 | MMC_RSP_CRC) -#define MMC_RSP_R3 (MMC_RSP_PRESENT) -#define MMC_RSP_R4 (MMC_RSP_PRESENT) -#define MMC_RSP_R5 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE) -#define MMC_RSP_R6 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE) -#define MMC_RSP_R7 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE) - -#define SDHCI_DMA_ADDRESS 0x00 -#define SDHCI_BLOCK_SIZE 0x04 -#define SDHCI_MAKE_BLKSZ(dma, blksz) ((((dma) & 0x7) << 12) | ((blksz) & 0xFFF)) -#define SDHCI_BLOCK_COUNT 0x06 -#define SDHCI_ARGUMENT 0x08 -#define SDHCI_TRANSFER_MODE 0x0C -#define SDHCI_TRNS_DMA BIT(0) -#define SDHCI_TRNS_BLK_CNT_EN BIT(1) -#define SDHCI_TRNS_ACMD12 BIT(2) -#define SDHCI_TRNS_READ BIT(4) -#define SDHCI_TRNS_MULTI BIT(5) -#define SDHCI_COMMAND 0x0E -#define SDHCI_CMD_RESP_MASK 0x03 -#define SDHCI_CMD_CRC 0x08 -#define SDHCI_CMD_INDEX 0x10 -#define SDHCI_CMD_DATA 0x20 -#define SDHCI_CMD_ABORTCMD 0xC0 -#define SDHCI_CMD_RESP_NONE 0x00 -#define SDHCI_CMD_RESP_LONG 0x01 -#define SDHCI_CMD_RESP_SHORT 0x02 -#define SDHCI_CMD_RESP_SHORT_BUSY 0x03 -#define SDHCI_MAKE_CMD(c, f) ((((c) & 0xff) << 8) | ((f) & 0xff)) -#define SDHCI_RESPONSE 0x10 -#define SDHCI_HOST_CONTROL 0x28 -#define SDHCI_CTRL_DMA_MASK 0x18 -#define SDHCI_CTRL_SDMA 0x00 -#define SDHCI_BLOCK_GAP_CONTROL 0x2A -#define SDHCI_SOFTWARE_RESET 0x2F -#define SDHCI_RESET_CMD 0x02 -#define SDHCI_RESET_DATA 0x04 -#define SDHCI_INT_STATUS 0x30 -#define SDHCI_INT_RESPONSE BIT(0) -#define SDHCI_INT_DATA_END BIT(1) -#define SDHCI_INT_ERROR BIT(15) -#define SDHCI_SIGNAL_ENABLE 0x38 - -/* RCA assigned by Boot ROM */ -#define UNIPHIER_EMMC_RCA 0x1000 - -struct uniphier_mmc_cmd { - unsigned int cmdidx; - unsigned int resp_type; - unsigned int cmdarg; - unsigned int is_data; -}; - -static int uniphier_emmc_send_cmd(void __iomem *host_base, - struct uniphier_mmc_cmd *cmd) -{ - u32 mode = 0; - u32 mask = SDHCI_INT_RESPONSE; - u32 stat, flags; - - writel(U32_MAX, host_base + SDHCI_INT_STATUS); - writel(0, host_base + SDHCI_SIGNAL_ENABLE); - writel(cmd->cmdarg, host_base + SDHCI_ARGUMENT); - - if (cmd->is_data) - mode = SDHCI_TRNS_DMA | SDHCI_TRNS_BLK_CNT_EN | - SDHCI_TRNS_ACMD12 | SDHCI_TRNS_READ | - SDHCI_TRNS_MULTI; - - writew(mode, host_base + SDHCI_TRANSFER_MODE); - - if (!(cmd->resp_type & MMC_RSP_PRESENT)) - flags = SDHCI_CMD_RESP_NONE; - else if (cmd->resp_type & MMC_RSP_136) - flags = SDHCI_CMD_RESP_LONG; - else if (cmd->resp_type & MMC_RSP_BUSY) - flags = SDHCI_CMD_RESP_SHORT_BUSY; - else - flags = SDHCI_CMD_RESP_SHORT; - - if (cmd->resp_type & MMC_RSP_CRC) - flags |= SDHCI_CMD_CRC; - if (cmd->resp_type & MMC_RSP_OPCODE) - flags |= SDHCI_CMD_INDEX; - if (cmd->is_data) - flags |= SDHCI_CMD_DATA; - - if (cmd->resp_type & MMC_RSP_BUSY || cmd->is_data) - mask |= SDHCI_INT_DATA_END; - - writew(SDHCI_MAKE_CMD(cmd->cmdidx, flags), host_base + SDHCI_COMMAND); - - do { - stat = readl(host_base + SDHCI_INT_STATUS); - if (stat & SDHCI_INT_ERROR) - return -EIO; - - } while ((stat & mask) != mask); - - return 0; -} - -static int uniphier_emmc_switch_part(void __iomem *host_base, int part_num) -{ - struct uniphier_mmc_cmd cmd = {}; - - cmd.cmdidx = MMC_CMD_SWITCH; - cmd.resp_type = MMC_RSP_R1b; - cmd.cmdarg = (EXT_CSD_PART_CONF << 16) | (part_num << 8) | (3 << 24); - - return uniphier_emmc_send_cmd(host_base, &cmd); -} - -static int uniphier_emmc_is_over_2gb(void __iomem *host_base) -{ - struct uniphier_mmc_cmd cmd = {}; - u32 csd40, csd72; /* CSD[71:40], CSD[103:72] */ - int ret; - - cmd.cmdidx = MMC_CMD_SEND_CSD; - cmd.resp_type = MMC_RSP_R2; - cmd.cmdarg = UNIPHIER_EMMC_RCA << 16; - - ret = uniphier_emmc_send_cmd(host_base, &cmd); - if (ret) - return ret; - - csd40 = readl(host_base + SDHCI_RESPONSE + 4); - csd72 = readl(host_base + SDHCI_RESPONSE + 8); - - return !(~csd40 & 0xffc00380) && !(~csd72 & 0x3); -} - -static int uniphier_emmc_load_image(void __iomem *host_base, u32 dev_addr, - unsigned long load_addr, u32 block_cnt) -{ - struct uniphier_mmc_cmd cmd = {}; - u8 tmp; - - WARN_ON(load_addr >> 32); - - writel(load_addr, host_base + SDHCI_DMA_ADDRESS); - writew(SDHCI_MAKE_BLKSZ(7, 512), host_base + SDHCI_BLOCK_SIZE); - writew(block_cnt, host_base + SDHCI_BLOCK_COUNT); - - tmp = readb(host_base + SDHCI_HOST_CONTROL); - tmp &= ~SDHCI_CTRL_DMA_MASK; - tmp |= SDHCI_CTRL_SDMA; - writeb(tmp, host_base + SDHCI_HOST_CONTROL); - - tmp = readb(host_base + SDHCI_BLOCK_GAP_CONTROL); - tmp &= ~1; /* clear Stop At Block Gap Request */ - writeb(tmp, host_base + SDHCI_BLOCK_GAP_CONTROL); - - cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK; - cmd.resp_type = MMC_RSP_R1; - cmd.cmdarg = dev_addr; - cmd.is_data = 1; - - return uniphier_emmc_send_cmd(host_base, &cmd); -} - -static int spl_board_load_image(struct spl_image_info *spl_image, - struct spl_boot_device *bootdev) -{ - u32 dev_addr = CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR; - void __iomem *host_base = (void __iomem *)0x5a000200; - struct uniphier_mmc_cmd cmd = {}; - int ret; - - /* - * deselect card before SEND_CSD command. - * Do not check the return code. It fails, but it is OK. - */ - cmd.cmdidx = MMC_CMD_SELECT_CARD; - cmd.resp_type = MMC_RSP_R1; - - uniphier_emmc_send_cmd(host_base, &cmd); /* CMD7 (arg=0) */ - - /* reset CMD Line */ - writeb(SDHCI_RESET_CMD | SDHCI_RESET_DATA, - host_base + SDHCI_SOFTWARE_RESET); - while (readb(host_base + SDHCI_SOFTWARE_RESET)) - cpu_relax(); - - ret = uniphier_emmc_is_over_2gb(host_base); - if (ret < 0) - return ret; - if (ret) { - debug("card is block addressing\n"); - } else { - debug("card is byte addressing\n"); - dev_addr *= 512; - } - - cmd.cmdarg = UNIPHIER_EMMC_RCA << 16; - - /* select card again */ - ret = uniphier_emmc_send_cmd(host_base, &cmd); - if (ret) - printf("failed to select card\n"); - - /* Switch to Boot Partition 1 */ - ret = uniphier_emmc_switch_part(host_base, 1); - if (ret) - printf("failed to switch partition\n"); - - ret = uniphier_emmc_load_image(host_base, dev_addr, - CONFIG_SYS_TEXT_BASE, 1); - if (ret) { - printf("failed to load image\n"); - return ret; - } - - ret = spl_parse_image_header(spl_image, (void *)CONFIG_SYS_TEXT_BASE); - if (ret) - return ret; - - ret = uniphier_emmc_load_image(host_base, dev_addr, - spl_image->load_addr, - spl_image->size / 512); - if (ret) { - printf("failed to load image\n"); - return ret; - } - - return 0; -} -SPL_LOAD_IMAGE_METHOD("eMMC", 0, BOOT_DEVICE_BOARD, spl_board_load_image); |