diff options
author | Jagan Teki <jagan@amarulasolutions.com> | 2018-08-05 00:40:10 +0530 |
---|---|---|
committer | Jagan Teki <jagan@amarulasolutions.com> | 2018-09-28 22:09:24 +0530 |
commit | b9d59d08a6c7362a9558dd5f67cdf85cc3a1b7c8 (patch) | |
tree | ff3c8e396bea36b755ec3ca7bc6eca9156568e58 /arch/arm/dts/sun7i-a20-i12-tvbox.dts | |
parent | d1d4295aab97306454254989c8080f5093360af4 (diff) | |
download | u-boot-b9d59d08a6c7362a9558dd5f67cdf85cc3a1b7c8.zip u-boot-b9d59d08a6c7362a9558dd5f67cdf85cc3a1b7c8.tar.gz u-boot-b9d59d08a6c7362a9558dd5f67cdf85cc3a1b7c8.tar.bz2 |
ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit 5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5
Author: Stefan Mavrodiev <stefan@olimex.com>
Date: Wed May 16 14:38:08 2018 +0300
ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board
Note:
- Update sun7i-a20-primo73.dts as per Linux, since
this dts is U-Boot specific.
- Drop sun7i-a20-olimex-som-evb-emmc.dts since no board
added for this.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Diffstat (limited to 'arch/arm/dts/sun7i-a20-i12-tvbox.dts')
-rw-r--r-- | arch/arm/dts/sun7i-a20-i12-tvbox.dts | 34 |
1 files changed, 12 insertions, 22 deletions
diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts index 1e6bd36..2e3f2f2 100644 --- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "I12 / Q5 / QT840A A20 tvbox"; @@ -158,11 +157,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -174,7 +172,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; @@ -185,7 +183,7 @@ &mmc3_pins_a { /* AP6210 / AP6330 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -198,31 +196,23 @@ &pio { vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; }; vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - allwinner,pins = "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH21"; + function = "gpio_out"; }; led_pins_i12_tvbox: led_pins@0 { - allwinner,pins = "PH9", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9", "PH20"; + function = "gpio_out"; }; }; |