Merge branch 'next'WIP/10Jan2022

Signed-off-by: Tom Rini <trini@konsulko.com>

12 files changed, 39 insertions, 23 deletions

diff --git a/arch/arm/cpu/arm920t/ep93xx/speed.c b/arch/arm/cpu/arm920t/ep93xx/speed.c
index 51e9dda..8dd3904 100644
--- a/arch/arm/cpu/arm920t/ep93xx/speed.c
+++ b/arch/arm/cpu/arm920t/ep93xx/speed.c
@@ -6,12 +6,13 @@
  */
 
 #include <common.h>
+#include <clock_legacy.h>
 #include <asm/arch/ep93xx.h>
 #include <asm/io.h>
 #include <div64.h>
 
 /*
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ * get_board_sys_clk() should be defined as the input frequency of the PLL.
  *
  * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
  * the specified bus in HZ.
@@ -20,14 +21,14 @@
 /*
  * return the PLL output frequency
  *
- * PLL rate = CONFIG_SYS_CLK_FREQ * (X1FBD + 1) * (X2FBD + 1)
+ * PLL rate = get_board_sys_clk() * (X1FBD + 1) * (X2FBD + 1)
  * / (X2IPD + 1) / 2^PS
  */
 static ulong get_PLLCLK(uint32_t *pllreg)
 {
 	uint8_t i;
 	const uint32_t clkset = readl(pllreg);
-	uint64_t rate = CONFIG_SYS_CLK_FREQ;
+	uint64_t rate = get_board_sys_clk();
 	rate *= ((clkset >> SYSCON_CLKSET_PLL_X1FBD1_SHIFT) & 0x1f) + 1;
 	rate *= ((clkset >> SYSCON_CLKSET_PLL_X2FBD2_SHIFT) & 0x3f) + 1;
 	do_div(rate, (clkset  & 0x1f) + 1);			/* X2IPD */
@@ -87,9 +88,9 @@ ulong get_UCLK(void)
 
 	const uint32_t value = readl(&syscon->pwrcnt);
 	if (value & SYSCON_PWRCNT_UART_BAUD)
-		uclk_rate = CONFIG_SYS_CLK_FREQ;
+		uclk_rate = get_board_sys_clk();
 	else
-		uclk_rate = CONFIG_SYS_CLK_FREQ / 2;
+		uclk_rate = get_board_sys_clk() / 2;
 
 	return uclk_rate;
 }
diff --git a/arch/arm/cpu/arm920t/imx/speed.c b/arch/arm/cpu/arm920t/imx/speed.c
index eff6113..c19206a 100644
--- a/arch/arm/cpu/arm920t/imx/speed.c
+++ b/arch/arm/cpu/arm920t/imx/speed.c
@@ -7,13 +7,14 @@
 
 #include <common.h>
 #if defined (CONFIG_IMX)
+#include <clock_legacy.h>
 
 #include <asm/arch/imx-regs.h>
 
 /* ------------------------------------------------------------------------- */
 /* NOTE: This describes the proper use of this file.
  *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ * get_board_sys_clk() should be defined as the input frequency of the PLL.
  * SH FIXME: 16780000 in our case
  * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
  * the specified bus in HZ.
@@ -45,7 +46,7 @@ ulong get_mcuPLLCLK(void)
 
 	mfi = mfi<=5 ? 5 : mfi;
 
-	return (2*(CONFIG_SYS_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
+	return (2*(get_board_sys_clk()>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
 }
 
 ulong get_FCLK(void)
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index f919d02..6a948d7 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_LS1021A
 	bool
+	select FSL_IFC if !QSPI_BOOT && !SD_BOOT_QSPI
 	select SYS_FSL_DDR_BE if SYS_FSL_DDR
 	select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
 	select SYS_FSL_ERRATUM_A008378
diff --git a/arch/arm/cpu/armv7/ls102xa/clock.c b/arch/arm/cpu/armv7/ls102xa/clock.c
index 984ae8b..c5e6118 100644
--- a/arch/arm/cpu/armv7/ls102xa/clock.c
+++ b/arch/arm/cpu/armv7/ls102xa/clock.c
@@ -39,7 +39,7 @@ void get_sys_info(struct sys_info *sys_info)
 	uint i;
 	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
-	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+	unsigned long sysclk = get_board_sys_clk();
 
 	sys_info->freq_systembus = sysclk;
 #if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ)
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
index 0daf823..e63a905 100644
--- a/arch/arm/cpu/armv7/ls102xa/fdt.c
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -131,9 +131,9 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
 	sysclk_path = fdt_get_alias(blob, "sysclk");
 	if (sysclk_path)
 		do_fixup_by_path_u32(blob, sysclk_path, "clock-frequency",
-				     CONFIG_SYS_CLK_FREQ, 1);
+				     get_board_sys_clk(), 1);
 	do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0",
-			       "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+			       "clock-frequency", get_board_sys_clk(), 1);
 
 #if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT)
 #define UBOOT_HEAD_LEN	0x1000
@@ -184,13 +184,13 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 	off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT,
 					    CONFIG_SYS_IFC_ADDR);
-	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED);
 #else
 	off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT,
 					    QSPI0_BASE_ADDR);
-	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED);
 	off = fdt_node_offset_by_compat_reg(blob, FSL_DSPI_COMPAT,
 					    DSPI1_BASE_ADDR);
-	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED);
 #endif
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 1a057f7..da53afc 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -41,6 +41,7 @@ config ARCH_LS1028A
 	select SYS_FSL_SEC_COMPAT_5
 	select SYS_FSL_SEC_LE
 	select FSL_TZASC_1
+	select FSL_TZPC_BP147
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
@@ -59,6 +60,7 @@ config ARCH_LS1043A
 	bool
 	select ARMV8_SET_SMPEN
 	select ARM_ERRATA_855873 if !TFABOOT
+	select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI)
 	select FSL_LAYERSCAPE
 	select FSL_LSCH2
 	select GICV2
@@ -94,6 +96,7 @@ config ARCH_LS1043A
 config ARCH_LS1046A
 	bool
 	select ARMV8_SET_SMPEN
+	select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI)
 	select FSL_LAYERSCAPE
 	select FSL_LSCH2
 	select GICV2
@@ -134,6 +137,7 @@ config ARCH_LS1088A
 	bool
 	select ARMV8_SET_SMPEN
 	select ARM_ERRATA_855873 if !TFABOOT
+	select FSL_IFC
 	select FSL_LAYERSCAPE
 	select FSL_LSCH3
 	select GICV3
@@ -182,6 +186,7 @@ config ARCH_LS2080A
 	select ARM_ERRATA_828024
 	select ARM_ERRATA_829520
 	select ARM_ERRATA_833471
+	select FSL_IFC
 	select FSL_LAYERSCAPE
 	select FSL_LSCH3
 	select GICV3
@@ -233,8 +238,11 @@ config ARCH_LS2080A
 config ARCH_LX2162A
 	bool
 	select ARMV8_SET_SMPEN
+	select FSL_DDR_BIST
+	select FSL_DDR_INTERACTIVE
 	select FSL_LAYERSCAPE
 	select FSL_LSCH3
+	select FSL_TZPC_BP147
 	select GICV3
 	select NXP_LSCH3_2
 	select SYS_HAS_SERDES
@@ -254,6 +262,7 @@ config ARCH_LX2162A
 	select SYS_FSL_HAS_DDR4
 	select SYS_FSL_SEC_COMPAT_5
 	select SYS_FSL_SEC_LE
+	select SYS_PCI_64BIT if PCI
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
@@ -267,8 +276,11 @@ config ARCH_LX2162A
 config ARCH_LX2160A
 	bool
 	select ARMV8_SET_SMPEN
+	select FSL_DDR_BIST
+	select FSL_DDR_INTERACTIVE
 	select FSL_LAYERSCAPE
 	select FSL_LSCH3
+	select FSL_TZPC_BP147
 	select GICV3
 	select HAS_FSL_XHCI_USB if USB_HOST
 	select NXP_LSCH3_2
@@ -290,6 +302,7 @@ config ARCH_LX2160A
 	select SYS_FSL_HAS_DDR4
 	select SYS_FSL_SEC_COMPAT_5
 	select SYS_FSL_SEC_LE
+	select SYS_PCI_64BIT if PCI
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
@@ -517,10 +530,6 @@ endmenu
 menu "Layerscape clock tree configuration"
 	depends on FSL_LSCH2 || FSL_LSCH3
 
-config SYS_FSL_CLK
-	bool "Enable clock tree initialization"
-	default y
-
 config CLUSTER_CLK_FREQ
 	int "Reference clock of core cluster"
 	depends on ARCH_LS1012A
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 1a359d0..2ded3e4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <clock_legacy.h>
 #include <cpu_func.h>
 #include <env.h>
 #include <fsl_ddr_sdram.h>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 4ec0dbf..4354aa2 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -161,7 +161,7 @@ void fsl_fdt_disable_usb(void *blob)
 	 * controller is used, SYSCLK must meet the additional requirement
 	 * of 100 MHz.
 	 */
-	if (CONFIG_SYS_CLK_FREQ != 100000000) {
+	if (get_board_sys_clk() != 100000000) {
 		off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3");
 		while (off != -FDT_ERR_NOTFOUND) {
 			fdt_status_disabled(blob, off);
@@ -655,7 +655,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
 #endif
 
 	do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency",
-			     CONFIG_SYS_CLK_FREQ, 1);
+			     get_board_sys_clk(), 1);
 
 #ifdef CONFIG_GIC_V3_ITS
 	ls_gic_rd_tables_init(blob);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
index 3f97c8a..570105a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
@@ -52,12 +52,12 @@ void get_sys_info(struct sys_info *sys_info)
 	uint i, cluster;
 	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
-	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+	unsigned long sysclk = get_board_sys_clk();
 	unsigned long cluster_clk;
 
 	sys_info->freq_systembus = sysclk;
 #ifndef CONFIG_CLUSTER_CLK_FREQ
-#define CONFIG_CLUSTER_CLK_FREQ	CONFIG_SYS_CLK_FREQ
+#define CONFIG_CLUSTER_CLK_FREQ	get_board_sys_clk()
 #endif
 	cluster_clk = CONFIG_CLUSTER_CLK_FREQ;
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
index 6f50cba..1c04a5b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -72,7 +72,7 @@ void get_sys_info(struct sys_info *sys_info)
 #endif
 	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
-	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+	unsigned long sysclk = get_board_sys_clk();
 	int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS;
 	u32 c_pll_sel, cplx_pll;
 	void *offset;
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/mp.c b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
index d28ab26..2e2688e 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/mp.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
@@ -4,6 +4,7 @@
  */
 
 #include <common.h>
+#include <clock_legacy.h>
 #include <cpu_func.h>
 #include <image.h>
 #include <log.h>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index 68111b6..564cc27 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -93,7 +93,9 @@ void board_init_f(ulong dummy)
 	i2c_init_all();
 #endif
 #endif
-#ifdef CONFIG_VID
+#if defined(CONFIG_VID) && (defined(CONFIG_ARCH_LS1088A) || \
+			    defined(CONFIG_ARCH_LX2160A) || \
+			    defined(CONFIG_ARCH_LX2162A))
 	init_func_vid();
 #endif
 	dram_init();